* PowerPC Cross-compile of 2.6 kernels
@ 2003-09-10 23:41 Judith Lebzelter
2003-09-12 15:06 ` Tom Rini
0 siblings, 1 reply; 12+ messages in thread
From: Judith Lebzelter @ 2003-09-10 23:41 UTC (permalink / raw)
To: linux-kernel; +Cc: plm-devel
Hello,
In response to requests at OLS, we've added cross-compile
capability to the PLM, and the first architecture
implemented is PowerPC. The powerpc code is
generated via a cross-compiler set up using Dan
Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1,
glibc-2.3.2 and built for the powerpc-750.
The filter run is the compile regress developed by John
Cherry at OSDL. Refer to his prior mail on lkml for the
results of this filter on ia386 and IA64.
Look at
http://www.osdl.org/plm-cgi/plm?module=search
and look up linux-2.6.0-test5 or any later kernels for the
results of this filter under 'PPC-Cross Compile Regress'.
Does anyone have any input regarding requests for
additional architectures or improvements to the
filters? Please cc me in any responses to lkml as I do
not currently monitor this list, though other OSDL
employees do.
Thanks;
Judith Lebzelter
OSDL
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-10 23:41 PowerPC Cross-compile of 2.6 kernels Judith Lebzelter @ 2003-09-12 15:06 ` Tom Rini 2003-09-12 16:52 ` Judith Lebzelter 0 siblings, 1 reply; 12+ messages in thread From: Tom Rini @ 2003-09-12 15:06 UTC (permalink / raw) To: Judith Lebzelter; +Cc: linux-kernel, plm-devel [-- Attachment #1: Type: text/plain, Size: 1227 bytes --] On Wed, Sep 10, 2003 at 04:41:05PM -0700, Judith Lebzelter wrote: > Hello, > > In response to requests at OLS, we've added cross-compile > capability to the PLM, and the first architecture > implemented is PowerPC. The powerpc code is > generated via a cross-compiler set up using Dan > Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1, > glibc-2.3.2 and built for the powerpc-750. > > The filter run is the compile regress developed by John > Cherry at OSDL. Refer to his prior mail on lkml for the > results of this filter on ia386 and IA64. > > Look at > http://www.osdl.org/plm-cgi/plm?module=search > and look up linux-2.6.0-test5 or any later kernels for the > results of this filter under 'PPC-Cross Compile Regress'. > > Does anyone have any input regarding requests for > additional architectures or improvements to the > filters? Please cc me in any responses to lkml as I do > not currently monitor this list, though other OSDL > employees do. Is there any way to seed the config so that it will override what allmodconfig (or allyesconfig) sets? Both of these targets by nature pick an 'odd' machine to compile for. -- Tom Rini http://gate.crashing.org/~trini/ [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-12 15:06 ` Tom Rini @ 2003-09-12 16:52 ` Judith Lebzelter 2003-09-12 16:56 ` Tom Rini 0 siblings, 1 reply; 12+ messages in thread From: Judith Lebzelter @ 2003-09-12 16:52 UTC (permalink / raw) To: Tom Rini; +Cc: Judith Lebzelter, linux-kernel, plm-devel On Fri, 12 Sep 2003, Tom Rini wrote: > On Wed, Sep 10, 2003 at 04:41:05PM -0700, Judith Lebzelter wrote: > > Hello, > > > > In response to requests at OLS, we've added cross-compile > > capability to the PLM, and the first architecture > > implemented is PowerPC. The powerpc code is > > generated via a cross-compiler set up using Dan > > Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1, > > glibc-2.3.2 and built for the powerpc-750. > > > > The filter run is the compile regress developed by John > > Cherry at OSDL. Refer to his prior mail on lkml for the > > results of this filter on ia386 and IA64. > > > > Look at > > http://www.osdl.org/plm-cgi/plm?module=search > > and look up linux-2.6.0-test5 or any later kernels for the > > results of this filter under 'PPC-Cross Compile Regress'. > > > > Does anyone have any input regarding requests for > > additional architectures or improvements to the > > filters? Please cc me in any responses to lkml as I do > > not currently monitor this list, though other OSDL > > employees do. > > Is there any way to seed the config so that it will override what > allmodconfig (or allyesconfig) sets? Both of these targets by nature > pick an 'odd' machine to compile for. > The 'allmodconfig' is what we run, and it chose # # Platform support # CONFIG_PPC=y CONFIG_PPC32=y CONFIG_6xx=y # # IBM 4xx options # CONFIG_EMBEDDEDBOOT=y CONFIG_8260=y CONFIG_PPC_STD_MMU=y CONFIG_SERIAL_CONSOLE=y # CONFIG_EST8260 is not set # CONFIG_SBS8260 is not set # CONFIG_RPX6 is not set # CONFIG_TQM8260 is not set CONFIG_WILLOW_1=y I had to change this to do TQM8260 because the header file willow.h is missing and the number of errors for this one file made the compile look far worse than it actually was. If you suggest something, I will change it. I also realize that my output should include any changes I make to the configurations and have that changed right away. We are also adding the 'allyesconfig' and will apply the same platform changes as to 'allmodconfig'. Thanks; Judith > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-12 16:52 ` Judith Lebzelter @ 2003-09-12 16:56 ` Tom Rini 2003-09-12 20:13 ` Judith Lebzelter 0 siblings, 1 reply; 12+ messages in thread From: Tom Rini @ 2003-09-12 16:56 UTC (permalink / raw) To: Judith Lebzelter; +Cc: linux-kernel, plm-devel On Fri, Sep 12, 2003 at 09:52:23AM -0700, Judith Lebzelter wrote: > On Fri, 12 Sep 2003, Tom Rini wrote: > > > On Wed, Sep 10, 2003 at 04:41:05PM -0700, Judith Lebzelter wrote: > > > Hello, > > > > > > In response to requests at OLS, we've added cross-compile > > > capability to the PLM, and the first architecture > > > implemented is PowerPC. The powerpc code is > > > generated via a cross-compiler set up using Dan > > > Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1, > > > glibc-2.3.2 and built for the powerpc-750. > > > > > > The filter run is the compile regress developed by John > > > Cherry at OSDL. Refer to his prior mail on lkml for the > > > results of this filter on ia386 and IA64. > > > > > > Look at > > > http://www.osdl.org/plm-cgi/plm?module=search > > > and look up linux-2.6.0-test5 or any later kernels for the > > > results of this filter under 'PPC-Cross Compile Regress'. > > > > > > Does anyone have any input regarding requests for > > > additional architectures or improvements to the > > > filters? Please cc me in any responses to lkml as I do > > > not currently monitor this list, though other OSDL > > > employees do. > > > > Is there any way to seed the config so that it will override what > > allmodconfig (or allyesconfig) sets? Both of these targets by nature > > pick an 'odd' machine to compile for. > > > > The 'allmodconfig' is what we run, and it chose > # > # Platform support > # > CONFIG_PPC=y > CONFIG_PPC32=y > CONFIG_6xx=y > > # > # IBM 4xx options > # > CONFIG_EMBEDDEDBOOT=y > CONFIG_8260=y > CONFIG_PPC_STD_MMU=y > CONFIG_SERIAL_CONSOLE=y > # CONFIG_EST8260 is not set > # CONFIG_SBS8260 is not set > # CONFIG_RPX6 is not set > # CONFIG_TQM8260 is not set > CONFIG_WILLOW_1=y > > I had to change this to do TQM8260 because the header file willow.h is > missing and the number of errors for this one file made the compile look > far worse than it actually was. If you suggest something, I will > change it. Don't select 8260 at all, and then the default choice should be CONFIG_PPC_MULTIPLATFORM, which is normally the best choice. I suppose this is more incentive for removing the rather bogus distinction made for 8260 boards. > I also realize that my output should include any changes I make to the > configurations and have that changed right away. > > We are also adding the 'allyesconfig' and will apply the same platform > changes as to 'allmodconfig'. Okay, thanks. -- Tom Rini http://gate.crashing.org/~trini/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-12 16:56 ` Tom Rini @ 2003-09-12 20:13 ` Judith Lebzelter 2003-09-12 21:32 ` Tom Rini 0 siblings, 1 reply; 12+ messages in thread From: Judith Lebzelter @ 2003-09-12 20:13 UTC (permalink / raw) To: Tom Rini; +Cc: linux-kernel, plm-devel On Fri, 12 Sep 2003, Tom Rini wrote: > On Fri, Sep 12, 2003 at 09:52:23AM -0700, Judith Lebzelter wrote: > > > On Fri, 12 Sep 2003, Tom Rini wrote: > > > > > On Wed, Sep 10, 2003 at 04:41:05PM -0700, Judith Lebzelter wrote: > > > > Hello, > > > > > > > > In response to requests at OLS, we've added cross-compile > > > > capability to the PLM, and the first architecture > > > > implemented is PowerPC. The powerpc code is > > > > generated via a cross-compiler set up using Dan > > > > Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1, > > > > glibc-2.3.2 and built for the powerpc-750. > > > > > > > > The filter run is the compile regress developed by John > > > > Cherry at OSDL. Refer to his prior mail on lkml for the > > > > results of this filter on ia386 and IA64. > > > > > > > > Look at > > > > http://www.osdl.org/plm-cgi/plm?module=search > > > > and look up linux-2.6.0-test5 or any later kernels for the > > > > results of this filter under 'PPC-Cross Compile Regress'. > > > > > > > > Does anyone have any input regarding requests for > > > > additional architectures or improvements to the > > > > filters? Please cc me in any responses to lkml as I do > > > > not currently monitor this list, though other OSDL > > > > employees do. > > > > > > Is there any way to seed the config so that it will override what > > > allmodconfig (or allyesconfig) sets? Both of these targets by nature > > > pick an 'odd' machine to compile for. > > > > > > > The 'allmodconfig' is what we run, and it chose > > # > > # Platform support > > # > > CONFIG_PPC=y > > CONFIG_PPC32=y > > CONFIG_6xx=y > > > > # > > # IBM 4xx options > > # > > CONFIG_EMBEDDEDBOOT=y > > CONFIG_8260=y > > CONFIG_PPC_STD_MMU=y > > CONFIG_SERIAL_CONSOLE=y > > # CONFIG_EST8260 is not set > > # CONFIG_SBS8260 is not set > > # CONFIG_RPX6 is not set > > # CONFIG_TQM8260 is not set > > CONFIG_WILLOW_1=y > > > > I had to change this to do TQM8260 because the header file willow.h is > > missing and the number of errors for this one file made the compile look > > far worse than it actually was. If you suggest something, I will > > change it. > > Don't select 8260 at all, and then the default choice should be > CONFIG_PPC_MULTIPLATFORM, which is normally the best choice. > I have changed it. Thanks for the input. I've also started a web page to summarize the ppc filter output for 2.6 base and mm kernel releases: http://www.osdl.org/archive/plm/ppc Judith > I suppose this is more incentive for removing the rather bogus > distinction made for 8260 boards. > > > I also realize that my output should include any changes I make to the > > configurations and have that changed right away. > > > > We are also adding the 'allyesconfig' and will apply the same platform > > changes as to 'allmodconfig'. > > Okay, thanks. > > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-12 20:13 ` Judith Lebzelter @ 2003-09-12 21:32 ` Tom Rini 2003-09-13 0:55 ` Cort Dougan 2003-09-29 16:54 ` Tom Rini 0 siblings, 2 replies; 12+ messages in thread From: Tom Rini @ 2003-09-12 21:32 UTC (permalink / raw) To: Judith Lebzelter; +Cc: linux-kernel, plm-devel On Fri, Sep 12, 2003 at 01:13:48PM -0700, Judith Lebzelter wrote: > On Fri, 12 Sep 2003, Tom Rini wrote: > > > On Fri, Sep 12, 2003 at 09:52:23AM -0700, Judith Lebzelter wrote: > > > > > On Fri, 12 Sep 2003, Tom Rini wrote: > > > > > > > On Wed, Sep 10, 2003 at 04:41:05PM -0700, Judith Lebzelter wrote: > > > > > Hello, > > > > > > > > > > In response to requests at OLS, we've added cross-compile > > > > > capability to the PLM, and the first architecture > > > > > implemented is PowerPC. The powerpc code is > > > > > generated via a cross-compiler set up using Dan > > > > > Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1, > > > > > glibc-2.3.2 and built for the powerpc-750. > > > > > > > > > > The filter run is the compile regress developed by John > > > > > Cherry at OSDL. Refer to his prior mail on lkml for the > > > > > results of this filter on ia386 and IA64. > > > > > > > > > > Look at > > > > > http://www.osdl.org/plm-cgi/plm?module=search > > > > > and look up linux-2.6.0-test5 or any later kernels for the > > > > > results of this filter under 'PPC-Cross Compile Regress'. > > > > > > > > > > Does anyone have any input regarding requests for > > > > > additional architectures or improvements to the > > > > > filters? Please cc me in any responses to lkml as I do > > > > > not currently monitor this list, though other OSDL > > > > > employees do. > > > > > > > > Is there any way to seed the config so that it will override what > > > > allmodconfig (or allyesconfig) sets? Both of these targets by nature > > > > pick an 'odd' machine to compile for. > > > > > > > > > > The 'allmodconfig' is what we run, and it chose > > > # > > > # Platform support > > > # > > > CONFIG_PPC=y > > > CONFIG_PPC32=y > > > CONFIG_6xx=y > > > > > > # > > > # IBM 4xx options > > > # > > > CONFIG_EMBEDDEDBOOT=y > > > CONFIG_8260=y > > > CONFIG_PPC_STD_MMU=y > > > CONFIG_SERIAL_CONSOLE=y > > > # CONFIG_EST8260 is not set > > > # CONFIG_SBS8260 is not set > > > # CONFIG_RPX6 is not set > > > # CONFIG_TQM8260 is not set > > > CONFIG_WILLOW_1=y > > > > > > I had to change this to do TQM8260 because the header file willow.h is > > > missing and the number of errors for this one file made the compile look > > > far worse than it actually was. If you suggest something, I will > > > change it. > > > > Don't select 8260 at all, and then the default choice should be > > CONFIG_PPC_MULTIPLATFORM, which is normally the best choice. > > > > I have changed it. Thanks for the input. Okay. And this motivated me to fix the root issue, and make 8260 be just another classic PPC set of boards. I'll let you know when this gets into Linus' tree. -- Tom Rini http://gate.crashing.org/~trini/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-12 21:32 ` Tom Rini @ 2003-09-13 0:55 ` Cort Dougan 2003-09-15 21:12 ` Judith Lebzelter 2003-09-29 16:54 ` Tom Rini 1 sibling, 1 reply; 12+ messages in thread From: Cort Dougan @ 2003-09-13 0:55 UTC (permalink / raw) To: Judith Lebzelter, linux-kernel, plm-devel It would be nice to see the 4xx and 8xx chips being tested. There are a lot of rarely tested configurations and targets in the PPC kernel. } > > > > > In response to requests at OLS, we've added cross-compile } > > > > > capability to the PLM, and the first architecture } > > > > > implemented is PowerPC. The powerpc code is } > > > > > generated via a cross-compiler set up using Dan } > > > > > Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1, } > > > > > glibc-2.3.2 and built for the powerpc-750. } > > > > > } > > > > > The filter run is the compile regress developed by John } > > > > > Cherry at OSDL. Refer to his prior mail on lkml for the } > > > > > results of this filter on ia386 and IA64. } > > > > > } > > > > > Look at } > > > > > http://www.osdl.org/plm-cgi/plm?module=search } > > > > > and look up linux-2.6.0-test5 or any later kernels for the } > > > > > results of this filter under 'PPC-Cross Compile Regress'. } > > > > > } > > > > > Does anyone have any input regarding requests for } > > > > > additional architectures or improvements to the } > > > > > filters? Please cc me in any responses to lkml as I do } > > > > > not currently monitor this list, though other OSDL } > > > > > employees do. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-13 0:55 ` Cort Dougan @ 2003-09-15 21:12 ` Judith Lebzelter 2003-09-15 21:22 ` Tom Rini 0 siblings, 1 reply; 12+ messages in thread From: Judith Lebzelter @ 2003-09-15 21:12 UTC (permalink / raw) To: Cort Dougan; +Cc: linux-kernel, plm-devel On Fri, 12 Sep 2003, Cort Dougan wrote: > It would be nice to see the 4xx and 8xx chips being tested. There are a > lot of rarely tested configurations and targets in the PPC kernel. I could run a simpler compile filter, one compile that counts and prints all the errors and warnings, on these extra platforms. Did you have any specific platform in mind? 40x give me 'walnut' and 8xx gives me 'rpx-lite' if I do 'make defconfig' followed by 'make oldconfig' where I set the main platform (to 40x or 8xx) and accept all the default options. Judith > > } > > > > > In response to requests at OLS, we've added cross-compile > } > > > > > capability to the PLM, and the first architecture > } > > > > > implemented is PowerPC. The powerpc code is > } > > > > > generated via a cross-compiler set up using Dan > } > > > > > Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1, > } > > > > > glibc-2.3.2 and built for the powerpc-750. > } > > > > > > } > > > > > The filter run is the compile regress developed by John > } > > > > > Cherry at OSDL. Refer to his prior mail on lkml for the > } > > > > > results of this filter on ia386 and IA64. > } > > > > > > } > > > > > Look at > } > > > > > http://www.osdl.org/plm-cgi/plm?module=search > } > > > > > and look up linux-2.6.0-test5 or any later kernels for the > } > > > > > results of this filter under 'PPC-Cross Compile Regress'. > } > > > > > > } > > > > > Does anyone have any input regarding requests for > } > > > > > additional architectures or improvements to the > } > > > > > filters? Please cc me in any responses to lkml as I do > } > > > > > not currently monitor this list, though other OSDL > } > > > > > employees do. > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-15 21:12 ` Judith Lebzelter @ 2003-09-15 21:22 ` Tom Rini 0 siblings, 0 replies; 12+ messages in thread From: Tom Rini @ 2003-09-15 21:22 UTC (permalink / raw) To: Judith Lebzelter; +Cc: Cort Dougan, linux-kernel, plm-devel On Mon, Sep 15, 2003 at 02:12:26PM -0700, Judith Lebzelter wrote: > On Fri, 12 Sep 2003, Cort Dougan wrote: > > > It would be nice to see the 4xx and 8xx chips being tested. There are a > > lot of rarely tested configurations and targets in the PPC kernel. > > I could run a simpler compile filter, one compile that counts and > prints all the errors and warnings, on these extra platforms. Did you > have any specific platform in mind? 40x give me 'walnut' and 8xx gives > me 'rpx-lite' if I do 'make defconfig' followed by 'make oldconfig' where > I set the main platform (to 40x or 8xx) and accept all the default > options. 'Walnut' is a good 40x platform. I wouldn't worry about 8xx right now, however. -- Tom Rini http://gate.crashing.org/~trini/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-12 21:32 ` Tom Rini 2003-09-13 0:55 ` Cort Dougan @ 2003-09-29 16:54 ` Tom Rini 2003-09-29 20:21 ` Judith Lebzelter 1 sibling, 1 reply; 12+ messages in thread From: Tom Rini @ 2003-09-29 16:54 UTC (permalink / raw) To: Judith Lebzelter; +Cc: linux-kernel, plm-devel On Fri, Sep 12, 2003 at 02:32:43PM -0700, Tom Rini wrote: > On Fri, Sep 12, 2003 at 01:13:48PM -0700, Judith Lebzelter wrote: > > On Fri, 12 Sep 2003, Tom Rini wrote: > > > > > On Fri, Sep 12, 2003 at 09:52:23AM -0700, Judith Lebzelter wrote: > > > > > > > On Fri, 12 Sep 2003, Tom Rini wrote: > > > > > > > > > On Wed, Sep 10, 2003 at 04:41:05PM -0700, Judith Lebzelter wrote: > > > > > > Hello, > > > > > > > > > > > > In response to requests at OLS, we've added cross-compile > > > > > > capability to the PLM, and the first architecture > > > > > > implemented is PowerPC. The powerpc code is > > > > > > generated via a cross-compiler set up using Dan > > > > > > Kegels's crosstool-0.22 on an i386 host using gcc-3.3.1, > > > > > > glibc-2.3.2 and built for the powerpc-750. > > > > > > > > > > > > The filter run is the compile regress developed by John > > > > > > Cherry at OSDL. Refer to his prior mail on lkml for the > > > > > > results of this filter on ia386 and IA64. > > > > > > > > > > > > Look at > > > > > > http://www.osdl.org/plm-cgi/plm?module=search > > > > > > and look up linux-2.6.0-test5 or any later kernels for the > > > > > > results of this filter under 'PPC-Cross Compile Regress'. > > > > > > > > > > > > Does anyone have any input regarding requests for > > > > > > additional architectures or improvements to the > > > > > > filters? Please cc me in any responses to lkml as I do > > > > > > not currently monitor this list, though other OSDL > > > > > > employees do. > > > > > > > > > > Is there any way to seed the config so that it will override what > > > > > allmodconfig (or allyesconfig) sets? Both of these targets by nature > > > > > pick an 'odd' machine to compile for. > > > > > > > > > > > > > The 'allmodconfig' is what we run, and it chose > > > > # > > > > # Platform support > > > > # > > > > CONFIG_PPC=y > > > > CONFIG_PPC32=y > > > > CONFIG_6xx=y > > > > > > > > # > > > > # IBM 4xx options > > > > # > > > > CONFIG_EMBEDDEDBOOT=y > > > > CONFIG_8260=y > > > > CONFIG_PPC_STD_MMU=y > > > > CONFIG_SERIAL_CONSOLE=y > > > > # CONFIG_EST8260 is not set > > > > # CONFIG_SBS8260 is not set > > > > # CONFIG_RPX6 is not set > > > > # CONFIG_TQM8260 is not set > > > > CONFIG_WILLOW_1=y > > > > > > > > I had to change this to do TQM8260 because the header file willow.h is > > > > missing and the number of errors for this one file made the compile look > > > > far worse than it actually was. If you suggest something, I will > > > > change it. > > > > > > Don't select 8260 at all, and then the default choice should be > > > CONFIG_PPC_MULTIPLATFORM, which is normally the best choice. > > > > > > > I have changed it. Thanks for the input. > > Okay. And this motivated me to fix the root issue, and make 8260 be > just another classic PPC set of boards. I'll let you know when this > gets into Linus' tree. As of 2.6.0-test6, allyesconfig (with no fiddling of other options) on PPC is as sane as it's going to be. :) -- Tom Rini http://gate.crashing.org/~trini/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-29 16:54 ` Tom Rini @ 2003-09-29 20:21 ` Judith Lebzelter 2003-09-29 20:34 ` Tom Rini 0 siblings, 1 reply; 12+ messages in thread From: Judith Lebzelter @ 2003-09-29 20:21 UTC (permalink / raw) To: Tom Rini; +Cc: linux-kernel, plm-devel On Mon, 29 Sep 2003, Tom Rini wrote: > > As of 2.6.0-test6, allyesconfig (with no fiddling of other options) > on PPC is as sane as it's going to be. :) > Does this mean that the results of the compile are not useful or even confusing, since they do not fuss with configuration options? Would it be better not to run the 'allyesconfig' option? Here are the posted results: http://www.osdl.org/archive/plm/ppc/ Judith > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: PowerPC Cross-compile of 2.6 kernels 2003-09-29 20:21 ` Judith Lebzelter @ 2003-09-29 20:34 ` Tom Rini 0 siblings, 0 replies; 12+ messages in thread From: Tom Rini @ 2003-09-29 20:34 UTC (permalink / raw) To: Judith Lebzelter; +Cc: linux-kernel, plm-devel On Mon, Sep 29, 2003 at 01:21:53PM -0700, Judith Lebzelter wrote: > On Mon, 29 Sep 2003, Tom Rini wrote: > > > > > As of 2.6.0-test6, allyesconfig (with no fiddling of other options) > > on PPC is as sane as it's going to be. :) > > > > Does this mean that the results of the compile are not useful or even > confusing, since they do not fuss with configuration options? Would it be > better not to run the 'allyesconfig' option? Well, on PPC we get CONFIG_ISA, which is useful for a few drivers, but I suspect that it will enable a number of 'other' drivers as well. I'm not sure what would be more useful however. -- Tom Rini http://gate.crashing.org/~trini/ ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2003-09-29 20:35 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2003-09-10 23:41 PowerPC Cross-compile of 2.6 kernels Judith Lebzelter 2003-09-12 15:06 ` Tom Rini 2003-09-12 16:52 ` Judith Lebzelter 2003-09-12 16:56 ` Tom Rini 2003-09-12 20:13 ` Judith Lebzelter 2003-09-12 21:32 ` Tom Rini 2003-09-13 0:55 ` Cort Dougan 2003-09-15 21:12 ` Judith Lebzelter 2003-09-15 21:22 ` Tom Rini 2003-09-29 16:54 ` Tom Rini 2003-09-29 20:21 ` Judith Lebzelter 2003-09-29 20:34 ` Tom Rini
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).