From: "Michal Semler (volny.cz)" <cijoml@volny.cz>
To: "Randy.Dunlap" <rddunlap@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 3C59x module doesn't work in 2.6.0-test6
Date: Mon, 29 Sep 2003 19:30:57 +0200 [thread overview]
Message-ID: <200309291930.57987.cijoml@volny.cz> (raw)
In-Reply-To: <20030929101453.18c804dd.rddunlap@osdl.org>
Hi,
I call simply "modprobe 3c59x" as always.
In all previous kernels before 2.6.0-test6 it worked (2.4,2.2)
/etc/modprobe.conf
alias eth0 3c59x
options 3c59x 3c509x debug=0 options=4,8
It's generated from /etc/modules.conf in 2.4
alias eth0 3c59x
options 3c59x 3c509x debug=0 options=4,8
And looks the same
Info about card from 2.4.22:
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
01:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xcc00. Vers LK1.1.18-ac
00:50:04:6a:58:cd, IRQ 10
product code 544e rev 00.9 date 02-17-99
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
01:0a.0: scatter/gather enabled. h/w checksums enabled
Michal
Dne po 29. září 2003 19:14 jste napsal(a):
> On Sun, 28 Sep 2003 15:02:38 +0200 "Michal Semler (volny.cz)"
<cijoml@volny.cz> wrote:
> | Hi,
> |
> | I compiled 2.6.0-test6, but my ethernet card doesn't work:
> |
> | modprobe 3c59x tells this:
> | Sep 28 10:06:58 tata kernel: 3c59x: Unknown parameter `3c509x'
>
> So 3c59x complains about '3c509x' ??
>
> Did you use any module parameters, either on the modprobe command
> or in the /etc/modprobe.conf file?
>
> --
> ~Randy
next prev parent reply other threads:[~2003-09-29 17:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-28 13:02 3C59x module doesn't work in 2.6.0-test6 Michal Semler (volny.cz)
2003-09-29 17:14 ` Randy.Dunlap
2003-09-29 17:30 ` Michal Semler (volny.cz) [this message]
2003-09-29 18:06 ` Tomas Szepe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200309291930.57987.cijoml@volny.cz \
--to=cijoml@volny.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=rddunlap@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).