* PROBLEM: Aironet compile failure 2.6-test9/Alpha architecture
@ 2003-11-21 1:18 Buck Rekow
2003-11-21 3:22 ` Richard Henderson
2003-11-22 12:54 ` Adrian Bunk
0 siblings, 2 replies; 4+ messages in thread
From: Buck Rekow @ 2003-11-21 1:18 UTC (permalink / raw)
To: rth, linux-kernel, breed, achirica
Aironet is not listed as i can find in the file MAINTAINERS, however,
This report needs to go somewhere and do something. The maintainer is
however listed in airo.c. merry carbon-copy, people.
Quite simply, the compile fails with the following error. I'm not sure
anyone else is using an aironet card under Alpha, so I guess someone
needs to report this.
I must say Aironet can be a real pain.
predator:/usr/src/linux-2.6.0-test9# make modules
make[1]: `arch/alpha/kernel/asm-offsets.s' is up to date.
CC [M] drivers/net/wireless/airo.o
drivers/net/wireless/airo.c: In function `emmh32_setseed':
drivers/net/wireless/airo.c:1458: internal error--unrecognizable insn:
(insn:TI 512 478 513 (set (reg:DI 1 $1)
(plus:DI (reg:DI 30 $30)
(const_int 4398046511104 [0x40000000000]))) -1 (insn_list 51
(insn_list:REG_DEP_ANTI 494 (nil)))
(nil))
cpp0: output pipe has been closed
make[3]: *** [drivers/net/wireless/airo.o] Error 1
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
Here is the output of ver_linux
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
module-init-tools 2.4.15
e2fsprogs 1.34
PPP 2.4.1
nfs-utils 1.0
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 3.1.14
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded sb sb_lib uart401
Disregard the version of module-init-tools, as i had to reinstall the
old version to use my current kernel.
predator:/usr/src/linux-2.6.0-test9/scripts# more /proc/cpuinfo
cpu : Alpha
cpu model : EV56
cpu variation : 7
cpu revision : 0
cpu serial number :
system type : EB164
system variation : PC164
system revision : 0
system serial number :
cycle frequency [Hz] : 366300366
timer frequency [Hz] : 1024.00
page size [bytes] : 8192
phys. address bits : 40
max. addr. space # : 127
BogoMIPS : 726.76
kernel unaligned acc : 347920158
(pc=fffffc000057a334,va=fffffc000064e2a1)
user unaligned acc : 0 (pc=0,va=0)
platform string : Digital AlphaPC 164 366 MHz
cpus detected : 1
A quick rundown on my installed hardware:
predator:/usr/src/linux-2.6.0-test9# lspci -vvv | more
00:05.0 Network controller: AIRONET Wireless Communications: Unknown
device 0350
(rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 0000000002250000 (32-bit, non-prefetchable)
[size=12
8]
Region 1: I/O ports at 8000 [size=128]
Region 2: I/O ports at 8400 [size=64]
00:06.0 PCI bridge: Digital Equipment Corporation DECchip 21050 (rev 02)
(prog-i
f 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort+
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Bus: primary=00, secondary=01, subordinate=01, sec-latency=248
I/O behind bridge: 00009000-00009fff
Memory behind bridge: 08000000-092fffff
Prefetchable memory behind bridge: 00100000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21041
[Tulip
Pass 3] (rev 21)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 8080 [size=128]
Region 1: Memory at 0000000002251000 (32-bit, non-prefetchable)
[size=12
8]
Expansion ROM at 0000000002200000 [disabled] [size=256K]
00:08.0 Non-VGA unclassified device: Intel Corp. 82378IB [SIO ISA
Bridge] (rev 4
3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 0
00:09.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
(prog-if 00
[VGA])
Subsystem: S3 Inc. ViRGE/DX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 0000000004000000 (32-bit, non-prefetchable)
[size=64
M]
Expansion ROM at 0000000002240000 [disabled] [size=64K]
00:0b.0 IDE interface: CMD Technology Inc PCI0646 (rev 01) (prog-if 80
[Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 8440 [size=16]
01:01.0 SCSI storage controller: Adaptec AHA-3985 / AIC-7873 (rev 03)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 9000 [size=256]
Region 1: Memory at 0000000009230000 (32-bit, non-prefetchable)
[disable
d] [size=4K]
Expansion ROM at 0000000009200000 [disabled] [size=64K]
01:02.0 SCSI storage controller: Adaptec AHA-3985 / AIC-7873 (rev 03)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 9400 [size=256]
Region 1: Memory at 0000000009231000 (32-bit, non-prefetchable)
[disable
d] [size=4K]
Expansion ROM at 0000000009210000 [disabled] [size=64K]
01:03.0 SCSI storage controller: Adaptec AHA-3985 / AIC-7873 (rev 03)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 31
Region 0: I/O ports at 9800 [size=256]
Region 1: Memory at 0000000009232000 (32-bit, non-prefetchable)
[disable
d] [size=4K]
Expansion ROM at 0000000009220000 [disabled] [size=64K]
01:05.0 Memory controller: Adaptec AIC-7810
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort
- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 500ns max), cache line size 08
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 9c00 [size=256]
Region 1: Memory at 0000000009233000 (32-bit, non-prefetchable)
[size=4K
]
Region 2: Memory at 0000000009000000 (32-bit, prefetchable)
[size=2M]
This is blocking me from further testing of 2.6-test9 on alpha. (I'll
test more hardware if someone wants ot kick down a magma PCI breakout,
as my machhine is full, and literally buried in it's own hardware)
I'm willing to bet the problem is some 64 bit cleanliness issue.. I
don't really code (but for pidgin FORTRAN, and i'd likely get killed for
sending a patch in fortran)
There is a possibility this may be caused by GCC bug PR-9164, which is
present in debian 3.0 Alpha (Debian people: READ: *fix it*) which I am
running.
Hope this is fixable.
Buck Rekow
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PROBLEM: Aironet compile failure 2.6-test9/Alpha architecture
2003-11-21 1:18 PROBLEM: Aironet compile failure 2.6-test9/Alpha architecture Buck Rekow
@ 2003-11-21 3:22 ` Richard Henderson
2003-11-21 4:11 ` Jeremy T. Bouse
2003-11-22 12:54 ` Adrian Bunk
1 sibling, 1 reply; 4+ messages in thread
From: Richard Henderson @ 2003-11-21 3:22 UTC (permalink / raw)
To: Buck Rekow; +Cc: linux-kernel, breed, achirica
On Thu, Nov 20, 2003 at 06:18:31PM -0700, Buck Rekow wrote:
> drivers/net/wireless/airo.c: In function `emmh32_setseed':
> drivers/net/wireless/airo.c:1458: internal error--unrecognizable insn:
> (insn:TI 512 478 513 (set (reg:DI 1 $1)
> (plus:DI (reg:DI 30 $30)
> (const_int 4398046511104 [0x40000000000]))) -1 (insn_list 51
> (insn_list:REG_DEP_ANTI 494 (nil)))
> (nil))
This is always a compiler bug.
> Gnu C 2.95.4
File a bug with Debian if you want, but the GCC folk proper
aren't even going to look at something this old.
r~
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PROBLEM: Aironet compile failure 2.6-test9/Alpha architecture
2003-11-21 3:22 ` Richard Henderson
@ 2003-11-21 4:11 ` Jeremy T. Bouse
0 siblings, 0 replies; 4+ messages in thread
From: Jeremy T. Bouse @ 2003-11-21 4:11 UTC (permalink / raw)
To: linux-kernel; +Cc: Buck Rekow, breed, achirica
On Thu, Nov 20, 2003 at 07:22:16PM -0800, Richard Henderson wrote:
> On Thu, Nov 20, 2003 at 06:18:31PM -0700, Buck Rekow wrote:
> > drivers/net/wireless/airo.c: In function `emmh32_setseed':
> > drivers/net/wireless/airo.c:1458: internal error--unrecognizable insn:
> > (insn:TI 512 478 513 (set (reg:DI 1 $1)
> > (plus:DI (reg:DI 30 $30)
> > (const_int 4398046511104 [0x40000000000]))) -1 (insn_list 51
> > (insn_list:REG_DEP_ANTI 494 (nil)))
> > (nil))
>
> This is always a compiler bug.
>
> > Gnu C 2.95.4
>
> File a bug with Debian if you want, but the GCC folk proper
> aren't even going to look at something this old.
>
Being a Debian Developer this must be being built on Woody 3.0 which
is the current stable release. Sarge the current testing and Sid the
unstable distros both have 3.2 or 3.3 default...
Regards,
Jeremy
>
> r~
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: PROBLEM: Aironet compile failure 2.6-test9/Alpha architecture
2003-11-21 1:18 PROBLEM: Aironet compile failure 2.6-test9/Alpha architecture Buck Rekow
2003-11-21 3:22 ` Richard Henderson
@ 2003-11-22 12:54 ` Adrian Bunk
1 sibling, 0 replies; 4+ messages in thread
From: Adrian Bunk @ 2003-11-22 12:54 UTC (permalink / raw)
To: Buck Rekow; +Cc: rth, linux-kernel, breed, achirica
On Thu, Nov 20, 2003 at 06:18:31PM -0700, Buck Rekow wrote:
> Aironet is not listed as i can find in the file MAINTAINERS, however,
> This report needs to go somewhere and do something. The maintainer is
> however listed in airo.c. merry carbon-copy, people.
>
> Quite simply, the compile fails with the following error. I'm not sure
> anyone else is using an aironet card under Alpha, so I guess someone
> needs to report this.
> I must say Aironet can be a real pain.
>
> predator:/usr/src/linux-2.6.0-test9# make modules
> make[1]: `arch/alpha/kernel/asm-offsets.s' is up to date.
> CC [M] drivers/net/wireless/airo.o
> drivers/net/wireless/airo.c: In function `emmh32_setseed':
> drivers/net/wireless/airo.c:1458: internal error--unrecognizable insn:
> (insn:TI 512 478 513 (set (reg:DI 1 $1)
> (plus:DI (reg:DI 30 $30)
> (const_int 4398046511104 [0x40000000000]))) -1 (insn_list 51
> (insn_list:REG_DEP_ANTI 494 (nil)))
> (nil))
> cpp0: output pipe has been closed
> make[3]: *** [drivers/net/wireless/airo.o] Error 1
> make[2]: *** [drivers/net/wireless] Error 2
> make[1]: *** [drivers/net] Error 2
> make: *** [drivers] Error 2
>
> Here is the output of ver_linux
> Gnu C 2.95.4
>...
> There is a possibility this may be caused by GCC bug PR-9164, which is
> present in debian 3.0 Alpha (Debian people: READ: *fix it*) which I am
> running.
>
> Hope this is fixable.
This is a bug in the compiler, but the gcc developers stopped any
development on 2.95 long time ago.
Besides the fact that you'd have to wait half a year (or maybe two
years) until Debian 3.1 releases to get the fix if it was fixed, I doubt
anyone of the Debian gcc maintainers would spend his time on fixing bugs
in gcc 2.95 .
You might have luck with trying to use the gcc-3.0 in stable to compile
your kernel, but since I doubt anyone backported gcc 3.2 or 3.3 for
alpha to the pretty ancient Debian stable it might be that the only way
to get kernel 2.6 running for you would be to try to locally modify
airo.c in a way that your gcc compiles it.
> Buck Rekow
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-11-22 12:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-21 1:18 PROBLEM: Aironet compile failure 2.6-test9/Alpha architecture Buck Rekow
2003-11-21 3:22 ` Richard Henderson
2003-11-21 4:11 ` Jeremy T. Bouse
2003-11-22 12:54 ` Adrian Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).