* New set of input patches
@ 2004-01-03 8:50 Dmitry Torokhov
2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov
` (5 more replies)
0 siblings, 6 replies; 39+ messages in thread
From: Dmitry Torokhov @ 2004-01-03 8:50 UTC (permalink / raw)
To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel
Hi Vojtech,
I have a new set of input patches, could you take look at them?
1. i8042-suspend.patch
Add suspend methods to i8042 to restore BIOS settings on suspend and
kill polling timer which sometimes prevents APM suspend
2. i8042-options-parsing.patch
psmouse-options-parsing.patch
atkbd-options.parsing
Complete conversion to the new way of parsing parameters. Drop "i8042_",
"psmouse_" and "atkbd_" prefixes from option names when compiled as a
module and require "i8042.", "psmouse." and "atkbd." prefixes if built
into the kernel.
3. missing-module-license.patch
Maple and newton keyboard drivers were missing MODULE_LICENSE("GPL")
4. kconfig-synaptics-help.patch
Suggest psmouse.proto=imps to Synaptics users who do not want install
native XFree Synaptics driver so taps would still work
5. sis-aux-port.patch
Do not ignore AUX port if chipset fails to disable it when we do probes
as SiS is having trouble disabling but otherwise mouse works fine.
The patches are on top of 2 other input patches (remove jitter and ps2
emulation) that I have sent to the list earlier. You can find the complete
set of patches at http://www.geocities.com/dt_or/input/2_6_0-rc1/ and
http://www.geocities.com/dt_or/input/2_6_0-rc1-mm1/
Dmitry
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH 1/7] i8042 suspend 2004-01-03 8:50 New set of input patches Dmitry Torokhov @ 2004-01-03 8:56 ` Dmitry Torokhov 2004-01-03 8:57 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov ` (4 more replies) 2004-01-03 10:10 ` New set of input patches Vojtech Pavlik ` (4 subsequent siblings) 5 siblings, 5 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 8:56 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1571, 2004-01-02 00:22:32-05:00, dtor_core@ameritech.net Input: Add suspend methods to restore original controller state on suspend as some BIOS don't like the state we leave it in. Also synchroniously delete the polling timer on module exit. i8042.c | 76 +++++++++++++++++++++++++++++++++++++++++++++------------------- 1 files changed, 54 insertions(+), 22 deletions(-) =================================================================== diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c --- a/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 @@ -746,6 +746,29 @@ /* + * Reset the controller. + */ +void i8042_controller_reset(void) +{ + if (i8042_reset) { + unsigned char param; + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) + printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); + } + +/* + * Restore the original control register setting. + */ + + i8042_ctr = i8042_initial_ctr; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_WARNING "i8042.c: Can't restore CTR.\n"); +} + + +/* * Here we try to reset everything back to a state in which the BIOS will be * able to talk to the hardware when rebooting. */ @@ -770,26 +793,20 @@ if (i8042_mux_values[i].exists) serio_cleanup(i8042_mux_port + i); -/* - * Reset the controller. - */ - - if (i8042_reset) { - unsigned char param; + i8042_controller_reset(); +} - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) - printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); - } /* - * Restore the original control register setting. + * Here we try to restore the original BIOS settings */ - i8042_ctr = i8042_initial_ctr; - - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) - printk(KERN_WARNING "i8042.c: Can't restore CTR.\n"); +static int i8042_controller_suspend(void) +{ + del_timer_sync(&i8042_timer); + i8042_controller_reset(); + return 0; } @@ -809,7 +826,7 @@ if (i8042_mux_present) if (i8042_enable_mux_mode(&i8042_aux_values, NULL) || i8042_enable_mux_ports(&i8042_aux_values)) { - printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't wotk.\n"); + printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n"); } /* @@ -825,6 +842,10 @@ for (i = 0; i < 4; i++) if (i8042_mux_values[i].exists && i8042_activate_port(i8042_mux_port + i) == 0) serio_reconnect(i8042_mux_port + i); +/* + * Restart timer (for polling "stuck" data) + */ + mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD); return 0; } @@ -851,16 +872,22 @@ }; /* - * Resume handler for the new PM scheme (driver model) + * Suspend/resume handlers for the new PM scheme (driver model) */ +static int i8042_suspend(struct sys_device *dev, u32 state) +{ + return i8042_controller_suspend(); +} + static int i8042_resume(struct sys_device *dev) { return i8042_controller_resume(); } static struct sysdev_class kbc_sysclass = { - set_kset_name("i8042"), - .resume = i8042_resume, + set_kset_name("i8042"), + .suspend = i8042_suspend, + .resume = i8042_resume, }; static struct sys_device device_i8042 = { @@ -869,12 +896,17 @@ }; /* - * Resume handler for the old PM scheme (APM) + * Suspend/resume handler for the old PM scheme (APM) */ static int i8042_pm_callback(struct pm_dev *dev, pm_request_t request, void *dummy) { - if (request == PM_RESUME) - return i8042_controller_resume(); + switch (request) { + case PM_SUSPEND: + return i8042_controller_suspend(); + + case PM_RESUME: + return i8042_controller_resume(); + } return 0; } @@ -955,7 +987,7 @@ sysdev_class_unregister(&kbc_sysclass); } - del_timer(&i8042_timer); + del_timer_sync(&i8042_timer); i8042_controller_cleanup(); ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 2/7] i8042 option parsing 2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov @ 2004-01-03 8:57 ` Dmitry Torokhov 2004-01-03 9:00 ` [PATCH 3/7] psmouse " Dmitry Torokhov 2004-03-29 15:39 ` Dmitry Torokhov 2004-01-03 10:03 ` [PATCH 1/7] i8042 suspend Vojtech Pavlik ` (3 subsequent siblings) 4 siblings, 2 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 8:57 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1572, 2004-01-02 02:46:43-05:00, dtor_core@ameritech.net Input: With Vojtech's approval adjusted i8042 option names by dropping i8042_ prefix. If i8042 is compiled as a module new option names are: direct, dumbkbd, noaux, nomux, reset, unlock If i8042 is build in the kernel the prefix "i8042." is required in front of an option, like "i8042.reset" Documentation/kernel-parameters.txt | 16 +++++++++------- drivers/input/serio/i8042.c | 18 ++++++++++++------ 2 files changed, 21 insertions(+), 13 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Sat Jan 3 03:08:12 2004 +++ b/Documentation/kernel-parameters.txt Sat Jan 3 03:08:12 2004 @@ -372,13 +372,15 @@ noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing - i8042_direct [HW] Keyboard has been put into non-translated mode - by BIOS - i8042_dumbkbd [HW] Don't attempt to blink the leds - i8042_noaux [HW] Don't check for auxiliary (== mouse) port - i8042_nomux - i8042_reset [HW] Reset the controller during init and cleanup - i8042_unlock [HW] Unlock (ignore) the keylock + i8042.direct [HW] Put keyboard port into non-translated mode + i8042.dumbkbd [HW] Pretend that controlled can only read data from + keyboard and can not control its state + (Don't attempt to blink the leds) + i8042.noaux [HW] Don't check for auxiliary (== mouse) port + i8042.nomux [HW] Don't check presence of an active multiplexing + controller + i8042.reset [HW] Reset the controller during init and cleanup + i8042.unlock [HW] Unlock (ignore) the keylock i810= [HW,DRM] diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c --- a/drivers/input/serio/i8042.c Sat Jan 3 03:08:12 2004 +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:08:12 2004 @@ -29,22 +29,28 @@ MODULE_LICENSE("GPL"); static unsigned int i8042_noaux; -module_param(i8042_noaux, bool, 0); +module_param_named(noaux, i8042_noaux, bool, 0); +MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); static unsigned int i8042_nomux; -module_param(i8042_nomux, bool, 0); +module_param_named(nomux, i8042_nomux, bool, 0); +MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present."); static unsigned int i8042_unlock; -module_param(i8042_unlock, bool, 0); +module_param_named(unlock, i8042_unlock, bool, 0); +MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); static unsigned int i8042_reset; -module_param(i8042_reset, bool, 0); +module_param_named(reset, i8042_reset, bool, 0); +MODULE_PARM_DESC(reset, "Reset controller during init and cleanup."); static unsigned int i8042_direct; -module_param(i8042_direct, bool, 0); +module_param_named(direct, i8042_direct, bool, 0); +MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode."); static unsigned int i8042_dumbkbd; -module_param(i8042_dumbkbd, bool, 0); +module_param_named(dumbkbd, i8042_dumbkbd, bool, 0); +MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard"); #undef DEBUG #include "i8042.h" ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/7] psmouse option parsing 2004-01-03 8:57 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov @ 2004-01-03 9:00 ` Dmitry Torokhov 2004-01-03 9:01 ` [PATCH 4/7] atkbd " Dmitry Torokhov ` (3 more replies) 2004-03-29 15:39 ` Dmitry Torokhov 1 sibling, 4 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 9:00 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1573, 2004-01-02 03:02:35-05:00, dtor_core@ameritech.net Input: With Vojtech's approval adjusted psmouse option names by dropping psmouse_ prefix. If psmouse is compiled as a module new option names are: proto, rate, resetafter, resolution, smartscroll If psmouse is built in the kernel the prefix "psmouse." is required in front of an option, like "psmouse.proto" Also, since we are changing all names, killed psmouse_noext completely Documentation/kernel-parameters.txt | 12 +++++++++--- drivers/input/mouse/psmouse-base.c | 30 ++++++++++-------------------- 2 files changed, 19 insertions(+), 23 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Sat Jan 3 03:08:40 2004 +++ b/Documentation/kernel-parameters.txt Sat Jan 3 03:08:40 2004 @@ -797,12 +797,18 @@ before loading. See Documentation/ramdisk.txt. - psmouse_proto= [HW,MOUSE] Highest PS2 mouse protocol extension to + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for (bare|imps|exps). - - psmouse_resetafter= + psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports + per second. + psmouse.resetafter= [HW,MOUSE] Try to reset Synaptics Touchpad after so many bad packets (0 = never). + psmouse.resolution= + [HW,MOUSE] Set desired mouse resolution, in dpi. + psmouse.smartscroll= + [HW,MOUSE] Controls Logitech smartscroll autoreteat, + 0 = disabled, 1 = enabled (default). pss= [HW,OSS] Personal Sound System (ECHO ESC614) Format: <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> diff -Nru a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c --- a/drivers/input/mouse/psmouse-base.c Sat Jan 3 03:08:40 2004 +++ b/drivers/input/mouse/psmouse-base.c Sat Jan 3 03:08:40 2004 @@ -35,30 +35,26 @@ MODULE_DESCRIPTION("PS/2 mouse driver"); MODULE_LICENSE("GPL"); -static int psmouse_noext; -module_param(psmouse_noext, int, 0); -MODULE_PARM_DESC(psmouse_noext, "[DEPRECATED] Disable any protocol extensions. Useful for KVM switches."); - static char *psmouse_proto; static unsigned int psmouse_max_proto = -1U; -module_param(psmouse_proto, charp, 0); -MODULE_PARM_DESC(psmouse_proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches."); +module_param_named(proto, psmouse_proto, charp, 0); +MODULE_PARM_DESC(proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches."); int psmouse_resolution = 200; -module_param(psmouse_resolution, uint, 0); -MODULE_PARM_DESC(psmouse_resolution, "Resolution, in dpi."); +module_param_named(resolution, psmouse_resolution, uint, 0); +MODULE_PARM_DESC(resolution, "Resolution, in dpi."); unsigned int psmouse_rate = 100; -module_param(psmouse_rate, uint, 0); -MODULE_PARM_DESC(psmouse_rate, "Report rate, in reports per second."); +module_param_named(rate, psmouse_rate, uint, 0); +MODULE_PARM_DESC(rate, "Report rate, in reports per second."); int psmouse_smartscroll = 1; -module_param(psmouse_smartscroll, bool, 0); -MODULE_PARM_DESC(psmouse_smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); +module_param_named(smartscroll, psmouse_smartscroll, bool, 0); +MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); unsigned int psmouse_resetafter; -module_param(psmouse_resetafter, uint, 0); -MODULE_PARM_DESC(psmouse_resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never)."); +module_param_named(resetafter, psmouse_resetafter, uint, 0); +MODULE_PARM_DESC(resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never)."); static char *psmouse_protocols[] = { "None", "PS/2", "PS2++", "PS2T++", "GenPS/2", "ImPS/2", "ImExPS/2", "SynPS/2"}; @@ -674,12 +670,6 @@ static inline void psmouse_parse_proto(void) { - if (psmouse_noext) { - printk(KERN_WARNING "psmouse: 'psmouse_noext' option is deprecated, please use 'psmouse_proto'\n"); - psmouse_max_proto = PSMOUSE_PS2; - } - - /* even is psmouse_noext is present psmouse_proto overrides it */ if (psmouse_proto) { if (!strcmp(psmouse_proto, "bare")) psmouse_max_proto = PSMOUSE_PS2; ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 4/7] atkbd option parsing 2004-01-03 9:00 ` [PATCH 3/7] psmouse " Dmitry Torokhov @ 2004-01-03 9:01 ` Dmitry Torokhov 2004-01-03 9:02 ` [PATCH 5/7] missing module licenses Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 5/7] missing module licenses Dmitry Torokhov 2004-01-03 10:07 ` [PATCH 3/7] psmouse option parsing Vojtech Pavlik ` (2 subsequent siblings) 3 siblings, 2 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 9:01 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1574, 2004-01-03 02:45:27-05:00, dtor_core@ameritech.net Input: converted atkbd to the new style of option parsing. If compiled as a module new option names are: set, softrepeat, reset. If built into the kernel options must be prepended with "atkbd." prefix, like "atkbd.softrepeat" Documentation/kernel-parameters.txt | 7 +++--- drivers/input/keyboard/atkbd.c | 40 ++++++++---------------------------- 2 files changed, 13 insertions(+), 34 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Sat Jan 3 03:09:00 2004 +++ b/Documentation/kernel-parameters.txt Sat Jan 3 03:09:00 2004 @@ -153,10 +153,11 @@ atascsi= [HW,SCSI] Atari SCSI - atkbd_set= [HW] Select keyboard code set + atkbd.set= [HW] Select keyboard code set Format: <int> - - atkbd_reset [HW] Reset keyboard during initialization + atkbd.softrepeat= + [HW] Use software keyboard repeat + atkbd.reset= [HW] Reset keyboard during initialization autotest [IA64] diff -Nru a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c --- a/drivers/input/keyboard/atkbd.c Sat Jan 3 03:09:00 2004 +++ b/drivers/input/keyboard/atkbd.c Sat Jan 3 03:09:00 2004 @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/init.h> @@ -29,18 +30,23 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); MODULE_DESCRIPTION("AT and PS/2 keyboard driver"); -MODULE_PARM(atkbd_set, "1i"); -MODULE_PARM(atkbd_reset, "1i"); -MODULE_PARM(atkbd_softrepeat, "1i"); MODULE_LICENSE("GPL"); static int atkbd_set = 2; +module_param_named(set, atkbd_set, int, 0); +MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3, 4)"); + #if defined(__i386__) || defined (__x86_64__) static int atkbd_reset; #else static int atkbd_reset = 1; #endif +module_param_named(reset, atkbd_reset, bool, 0); +MODULE_PARM_DESC(reset, "Reset keyboard during initialization"); + static int atkbd_softrepeat; +module_param_named(softrepeat, atkbd_softrepeat, bool, 0); +MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat"); /* * Scancode to keycode tables. These are just the default setting, and @@ -759,34 +765,6 @@ .disconnect = atkbd_disconnect, .cleanup = atkbd_cleanup, }; - -#ifndef MODULE -static int __init atkbd_setup_set(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) atkbd_set = ints[1]; - return 1; -} -static int __init atkbd_setup_reset(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) atkbd_reset = ints[1]; - return 1; -} -static int __init atkbd_setup_softrepeat(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) atkbd_softrepeat = ints[1]; - return 1; -} - -__setup("atkbd_set=", atkbd_setup_set); -__setup("atkbd_reset", atkbd_setup_reset); -__setup("atkbd_softrepeat=", atkbd_setup_softrepeat); -#endif int __init atkbd_init(void) { ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 5/7] missing module licenses 2004-01-03 9:01 ` [PATCH 4/7] atkbd " Dmitry Torokhov @ 2004-01-03 9:02 ` Dmitry Torokhov 2004-01-03 9:03 ` [PATCH 6/7] Kconfig Synaptics help Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 6/7] Kconfig Synaptics help Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 5/7] missing module licenses Dmitry Torokhov 1 sibling, 2 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 9:02 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1575, 2004-01-03 02:47:21-05:00, dtor_core@ameritech.net Input: Add missing MODULE_LICENSEs maple_keyb.c | 1 + newtonkbd.c | 2 ++ 2 files changed, 3 insertions(+) =================================================================== diff -Nru a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c --- a/drivers/input/keyboard/maple_keyb.c Sat Jan 3 03:09:34 2004 +++ b/drivers/input/keyboard/maple_keyb.c Sat Jan 3 03:09:34 2004 @@ -14,6 +14,7 @@ MODULE_AUTHOR("YAEGASHI Takeshi <t@keshi.org>"); MODULE_DESCRIPTION("SEGA Dreamcast keyboard driver"); +MODULE_LICENSE("GPL"); static unsigned char dc_kbd_keycode[256] = { 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38, diff -Nru a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c --- a/drivers/input/keyboard/newtonkbd.c Sat Jan 3 03:09:34 2004 +++ b/drivers/input/keyboard/newtonkbd.c Sat Jan 3 03:09:34 2004 @@ -33,6 +33,8 @@ #include <linux/serio.h> MODULE_AUTHOR("Justin Cormack <j.cormack@doc.ic.ac.uk>"); +MODULE_DESCRIPTION("Newton keyboard driver"); +MODULE_LICENSE("GPL"); #define NKBD_KEY 0x7f #define NKBD_PRESS 0x80 ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 6/7] Kconfig Synaptics help 2004-01-03 9:02 ` [PATCH 5/7] missing module licenses Dmitry Torokhov @ 2004-01-03 9:03 ` Dmitry Torokhov 2004-01-03 9:03 ` [PATCH 7/7] SiS AUX port Dmitry Torokhov 2004-03-29 15:39 ` Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 6/7] Kconfig Synaptics help Dmitry Torokhov 1 sibling, 2 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 9:03 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1576, 2004-01-03 02:49:55-05:00, dtor_core@ameritech.net Input: Kconfig help section update - Suggest psmouse.proto=imps option to Synaptics users who do not want installing native XFree driver but want tapping work Kconfig | 2 ++ 1 files changed, 2 insertions(+) =================================================================== diff -Nru a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig --- a/drivers/input/mouse/Kconfig Sat Jan 3 03:10:06 2004 +++ b/drivers/input/mouse/Kconfig Sat Jan 3 03:10:06 2004 @@ -29,6 +29,8 @@ and a new verion of GPM at: http://www.geocities.com/dt_or/gpm/gpm.html to take advantage of the advanced features of the touchpad. + If you do not want install specialized drivers but want tapping + working please use option psmouse.proto=imps. If unsure, say Y. ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 7/7] SiS AUX port 2004-01-03 9:03 ` [PATCH 6/7] Kconfig Synaptics help Dmitry Torokhov @ 2004-01-03 9:03 ` Dmitry Torokhov 2004-03-29 15:39 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 9:03 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1577, 2004-01-03 02:54:28-05:00, dtor_core@ameritech.net Input: Do not ignore AUX port if chipset fails to disable it (SiS seems to have trouble disabling AUX port, other than that the port works fine). i8042.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) =================================================================== diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c --- a/drivers/input/serio/i8042.c Sat Jan 3 03:10:31 2004 +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:10:31 2004 @@ -598,8 +598,10 @@ if (i8042_command(¶m, I8042_CMD_AUX_DISABLE)) return -1; - if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) - return -1; + if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) { + printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); + printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n"); + } if (i8042_command(¶m, I8042_CMD_AUX_ENABLE)) return -1; ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 7/7] SiS AUX port 2004-01-03 9:03 ` [PATCH 6/7] Kconfig Synaptics help Dmitry Torokhov 2004-01-03 9:03 ` [PATCH 7/7] SiS AUX port Dmitry Torokhov @ 2004-03-29 15:39 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1577, 2004-01-03 02:54:28-05:00, dtor_core@ameritech.net Input: Do not ignore AUX port if chipset fails to disable it (SiS seems to have trouble disabling AUX port, other than that the port works fine). i8042.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) =================================================================== diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c --- a/drivers/input/serio/i8042.c Sat Jan 3 03:10:31 2004 +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:10:31 2004 @@ -598,8 +598,10 @@ if (i8042_command(¶m, I8042_CMD_AUX_DISABLE)) return -1; - if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) - return -1; + if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) { + printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); + printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n"); + } if (i8042_command(¶m, I8042_CMD_AUX_ENABLE)) return -1; ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 6/7] Kconfig Synaptics help 2004-01-03 9:02 ` [PATCH 5/7] missing module licenses Dmitry Torokhov 2004-01-03 9:03 ` [PATCH 6/7] Kconfig Synaptics help Dmitry Torokhov @ 2004-03-29 15:39 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1576, 2004-01-03 02:49:55-05:00, dtor_core@ameritech.net Input: Kconfig help section update - Suggest psmouse.proto=imps option to Synaptics users who do not want installing native XFree driver but want tapping work Kconfig | 2 ++ 1 files changed, 2 insertions(+) =================================================================== diff -Nru a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig --- a/drivers/input/mouse/Kconfig Sat Jan 3 03:10:06 2004 +++ b/drivers/input/mouse/Kconfig Sat Jan 3 03:10:06 2004 @@ -29,6 +29,8 @@ and a new verion of GPM at: http://www.geocities.com/dt_or/gpm/gpm.html to take advantage of the advanced features of the touchpad. + If you do not want install specialized drivers but want tapping + working please use option psmouse.proto=imps. If unsure, say Y. ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 5/7] missing module licenses 2004-01-03 9:01 ` [PATCH 4/7] atkbd " Dmitry Torokhov 2004-01-03 9:02 ` [PATCH 5/7] missing module licenses Dmitry Torokhov @ 2004-03-29 15:39 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1575, 2004-01-03 02:47:21-05:00, dtor_core@ameritech.net Input: Add missing MODULE_LICENSEs maple_keyb.c | 1 + newtonkbd.c | 2 ++ 2 files changed, 3 insertions(+) =================================================================== diff -Nru a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c --- a/drivers/input/keyboard/maple_keyb.c Sat Jan 3 03:09:34 2004 +++ b/drivers/input/keyboard/maple_keyb.c Sat Jan 3 03:09:34 2004 @@ -14,6 +14,7 @@ MODULE_AUTHOR("YAEGASHI Takeshi <t@keshi.org>"); MODULE_DESCRIPTION("SEGA Dreamcast keyboard driver"); +MODULE_LICENSE("GPL"); static unsigned char dc_kbd_keycode[256] = { 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38, diff -Nru a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c --- a/drivers/input/keyboard/newtonkbd.c Sat Jan 3 03:09:34 2004 +++ b/drivers/input/keyboard/newtonkbd.c Sat Jan 3 03:09:34 2004 @@ -33,6 +33,8 @@ #include <linux/serio.h> MODULE_AUTHOR("Justin Cormack <j.cormack@doc.ic.ac.uk>"); +MODULE_DESCRIPTION("Newton keyboard driver"); +MODULE_LICENSE("GPL"); #define NKBD_KEY 0x7f #define NKBD_PRESS 0x80 ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/7] psmouse option parsing 2004-01-03 9:00 ` [PATCH 3/7] psmouse " Dmitry Torokhov 2004-01-03 9:01 ` [PATCH 4/7] atkbd " Dmitry Torokhov @ 2004-01-03 10:07 ` Vojtech Pavlik 2004-01-03 17:29 ` Dmitry Torokhov 2004-03-29 15:40 ` Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 4/7] atkbd " Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 3/7] psmouse " Vojtech Pavlik 3 siblings, 2 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-01-03 10:07 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 04:00:54AM -0500, Dmitry Torokhov wrote: > + [HW,MOUSE] Controls Logitech smartscroll autoreteat, > + 0 = disabled, 1 = enabled (default). Ha, a typo. :) -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/7] psmouse option parsing 2004-01-03 10:07 ` [PATCH 3/7] psmouse option parsing Vojtech Pavlik @ 2004-01-03 17:29 ` Dmitry Torokhov 2004-01-03 17:38 ` Vojtech Pavlik 2004-03-29 15:40 ` Vojtech Pavlik 2004-03-29 15:40 ` Dmitry Torokhov 1 sibling, 2 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 17:29 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel On Saturday 03 January 2004 05:07 am, Vojtech Pavlik wrote: > On Sat, Jan 03, 2004 at 04:00:54AM -0500, Dmitry Torokhov wrote: > > + [HW,MOUSE] Controls Logitech smartscroll autoreteat, > > + 0 = disabled, 1 = enabled (default). > > Ha, a typo. :) Darn! :) Sorry about that. I uploaded hand-corrected patch to http://www.geocities.co/dt_or/input/2_6_0-rc1/ and also sending it here for your reference. Dmitry =================================================================== ChangeSet@1.1573, 2004-01-02 03:02:35-05:00, dtor_core@ameritech.net Input: With Vojtech's approval adjusted psmouse option names by dropping psmouse_ prefix. If psmouse is compiled as a module new option names are: proto, rate, resetafter, resolution, smartscroll If psmouse is built in the kernel the prefix "psmouse." is required in front of an option, like "psmouse.proto" Also, since we are changing all names, killed psmouse_noext completely Documentation/kernel-parameters.txt | 12 +++++++++--- drivers/input/mouse/psmouse-base.c | 30 ++++++++++-------------------- 2 files changed, 19 insertions(+), 23 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Sat Jan 3 03:08:40 2004 +++ b/Documentation/kernel-parameters.txt Sat Jan 3 03:08:40 2004 @@ -797,12 +797,18 @@ before loading. See Documentation/ramdisk.txt. - psmouse_proto= [HW,MOUSE] Highest PS2 mouse protocol extension to + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for (bare|imps|exps). - - psmouse_resetafter= + psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports + per second. + psmouse.resetafter= [HW,MOUSE] Try to reset Synaptics Touchpad after so many bad packets (0 = never). + psmouse.resolution= + [HW,MOUSE] Set desired mouse resolution, in dpi. + psmouse.smartscroll= + [HW,MOUSE] Controls Logitech smartscroll autorepeat, + 0 = disabled, 1 = enabled (default). pss= [HW,OSS] Personal Sound System (ECHO ESC614) Format: <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> diff -Nru a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c --- a/drivers/input/mouse/psmouse-base.c Sat Jan 3 03:08:40 2004 +++ b/drivers/input/mouse/psmouse-base.c Sat Jan 3 03:08:40 2004 @@ -35,30 +35,26 @@ MODULE_DESCRIPTION("PS/2 mouse driver"); MODULE_LICENSE("GPL"); -static int psmouse_noext; -module_param(psmouse_noext, int, 0); -MODULE_PARM_DESC(psmouse_noext, "[DEPRECATED] Disable any protocol extensions. Useful for KVM switches."); - static char *psmouse_proto; static unsigned int psmouse_max_proto = -1U; -module_param(psmouse_proto, charp, 0); -MODULE_PARM_DESC(psmouse_proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches."); +module_param_named(proto, psmouse_proto, charp, 0); +MODULE_PARM_DESC(proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches."); int psmouse_resolution = 200; -module_param(psmouse_resolution, uint, 0); -MODULE_PARM_DESC(psmouse_resolution, "Resolution, in dpi."); +module_param_named(resolution, psmouse_resolution, uint, 0); +MODULE_PARM_DESC(resolution, "Resolution, in dpi."); unsigned int psmouse_rate = 100; -module_param(psmouse_rate, uint, 0); -MODULE_PARM_DESC(psmouse_rate, "Report rate, in reports per second."); +module_param_named(rate, psmouse_rate, uint, 0); +MODULE_PARM_DESC(rate, "Report rate, in reports per second."); int psmouse_smartscroll = 1; -module_param(psmouse_smartscroll, bool, 0); -MODULE_PARM_DESC(psmouse_smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); +module_param_named(smartscroll, psmouse_smartscroll, bool, 0); +MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); unsigned int psmouse_resetafter; -module_param(psmouse_resetafter, uint, 0); -MODULE_PARM_DESC(psmouse_resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never)."); +module_param_named(resetafter, psmouse_resetafter, uint, 0); +MODULE_PARM_DESC(resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never)."); static char *psmouse_protocols[] = { "None", "PS/2", "PS2++", "PS2T++", "GenPS/2", "ImPS/2", "ImExPS/2", "SynPS/2"}; @@ -674,12 +670,6 @@ static inline void psmouse_parse_proto(void) { - if (psmouse_noext) { - printk(KERN_WARNING "psmouse: 'psmouse_noext' option is deprecated, please use 'psmouse_proto'\n"); - psmouse_max_proto = PSMOUSE_PS2; - } - - /* even is psmouse_noext is present psmouse_proto overrides it */ if (psmouse_proto) { if (!strcmp(psmouse_proto, "bare")) psmouse_max_proto = PSMOUSE_PS2; ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/7] psmouse option parsing 2004-01-03 17:29 ` Dmitry Torokhov @ 2004-01-03 17:38 ` Vojtech Pavlik 2004-03-29 15:40 ` Vojtech Pavlik 1 sibling, 0 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-01-03 17:38 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 12:29:23PM -0500, Dmitry Torokhov wrote: > On Saturday 03 January 2004 05:07 am, Vojtech Pavlik wrote: > > On Sat, Jan 03, 2004 at 04:00:54AM -0500, Dmitry Torokhov wrote: > > > + [HW,MOUSE] Controls Logitech smartscroll autoreteat, > > > + 0 = disabled, 1 = enabled (default). > > > > Ha, a typo. :) > > Darn! :) > > Sorry about that. I uploaded hand-corrected patch to > > http://www.geocities.co/dt_or/input/2_6_0-rc1/ > > and also sending it here for your reference. > > Dmitry Patch is OK now. The first (i8042 reset) patch is also OK, I misread it when I thought I've found problems there. Andrew, please apply these patches to your tree and/or schedule them for inclusion into mainline. Good work, Dmitry! -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/7] psmouse option parsing 2004-01-03 17:29 ` Dmitry Torokhov 2004-01-03 17:38 ` Vojtech Pavlik @ 2004-03-29 15:40 ` Vojtech Pavlik 1 sibling, 0 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-03-29 15:40 UTC (permalink / raw) To: Administrator; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 12:29:23PM -0500, Dmitry Torokhov wrote: > On Saturday 03 January 2004 05:07 am, Vojtech Pavlik wrote: > > On Sat, Jan 03, 2004 at 04:00:54AM -0500, Dmitry Torokhov wrote: > > > + [HW,MOUSE] Controls Logitech smartscroll autoreteat, > > > + 0 = disabled, 1 = enabled (default). > > > > Ha, a typo. :) > > Darn! :) > > Sorry about that. I uploaded hand-corrected patch to > > http://www.geocities.co/dt_or/input/2_6_0-rc1/ > > and also sending it here for your reference. > > Dmitry Patch is OK now. The first (i8042 reset) patch is also OK, I misread it when I thought I've found problems there. Andrew, please apply these patches to your tree and/or schedule them for inclusion into mainline. Good work, Dmitry! -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/7] psmouse option parsing 2004-01-03 10:07 ` [PATCH 3/7] psmouse option parsing Vojtech Pavlik 2004-01-03 17:29 ` Dmitry Torokhov @ 2004-03-29 15:40 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:40 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel On Saturday 03 January 2004 05:07 am, Vojtech Pavlik wrote: > On Sat, Jan 03, 2004 at 04:00:54AM -0500, Dmitry Torokhov wrote: > > + [HW,MOUSE] Controls Logitech smartscroll autoreteat, > > + 0 = disabled, 1 = enabled (default). > > Ha, a typo. :) Darn! :) Sorry about that. I uploaded hand-corrected patch to http://www.geocities.co/dt_or/input/2_6_0-rc1/ and also sending it here for your reference. Dmitry =================================================================== ChangeSet@1.1573, 2004-01-02 03:02:35-05:00, dtor_core@ameritech.net Input: With Vojtech's approval adjusted psmouse option names by dropping psmouse_ prefix. If psmouse is compiled as a module new option names are: proto, rate, resetafter, resolution, smartscroll If psmouse is built in the kernel the prefix "psmouse." is required in front of an option, like "psmouse.proto" Also, since we are changing all names, killed psmouse_noext completely Documentation/kernel-parameters.txt | 12 +++++++++--- drivers/input/mouse/psmouse-base.c | 30 ++++++++++-------------------- 2 files changed, 19 insertions(+), 23 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Sat Jan 3 03:08:40 2004 +++ b/Documentation/kernel-parameters.txt Sat Jan 3 03:08:40 2004 @@ -797,12 +797,18 @@ before loading. See Documentation/ramdisk.txt. - psmouse_proto= [HW,MOUSE] Highest PS2 mouse protocol extension to + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for (bare|imps|exps). - - psmouse_resetafter= + psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports + per second. + psmouse.resetafter= [HW,MOUSE] Try to reset Synaptics Touchpad after so many bad packets (0 = never). + psmouse.resolution= + [HW,MOUSE] Set desired mouse resolution, in dpi. + psmouse.smartscroll= + [HW,MOUSE] Controls Logitech smartscroll autorepeat, + 0 = disabled, 1 = enabled (default). pss= [HW,OSS] Personal Sound System (ECHO ESC614) Format: <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> diff -Nru a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c --- a/drivers/input/mouse/psmouse-base.c Sat Jan 3 03:08:40 2004 +++ b/drivers/input/mouse/psmouse-base.c Sat Jan 3 03:08:40 2004 @@ -35,30 +35,26 @@ MODULE_DESCRIPTION("PS/2 mouse driver"); MODULE_LICENSE("GPL"); -static int psmouse_noext; -module_param(psmouse_noext, int, 0); -MODULE_PARM_DESC(psmouse_noext, "[DEPRECATED] Disable any protocol extensions. Useful for KVM switches."); - static char *psmouse_proto; static unsigned int psmouse_max_proto = -1U; -module_param(psmouse_proto, charp, 0); -MODULE_PARM_DESC(psmouse_proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches."); +module_param_named(proto, psmouse_proto, charp, 0); +MODULE_PARM_DESC(proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches."); int psmouse_resolution = 200; -module_param(psmouse_resolution, uint, 0); -MODULE_PARM_DESC(psmouse_resolution, "Resolution, in dpi."); +module_param_named(resolution, psmouse_resolution, uint, 0); +MODULE_PARM_DESC(resolution, "Resolution, in dpi."); unsigned int psmouse_rate = 100; -module_param(psmouse_rate, uint, 0); -MODULE_PARM_DESC(psmouse_rate, "Report rate, in reports per second."); +module_param_named(rate, psmouse_rate, uint, 0); +MODULE_PARM_DESC(rate, "Report rate, in reports per second."); int psmouse_smartscroll = 1; -module_param(psmouse_smartscroll, bool, 0); -MODULE_PARM_DESC(psmouse_smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); +module_param_named(smartscroll, psmouse_smartscroll, bool, 0); +MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); unsigned int psmouse_resetafter; -module_param(psmouse_resetafter, uint, 0); -MODULE_PARM_DESC(psmouse_resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never)."); +module_param_named(resetafter, psmouse_resetafter, uint, 0); +MODULE_PARM_DESC(resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never)."); static char *psmouse_protocols[] = { "None", "PS/2", "PS2++", "PS2T++", "GenPS/2", "ImPS/2", "ImExPS/2", "SynPS/2"}; @@ -674,12 +670,6 @@ static inline void psmouse_parse_proto(void) { - if (psmouse_noext) { - printk(KERN_WARNING "psmouse: 'psmouse_noext' option is deprecated, please use 'psmouse_proto'\n"); - psmouse_max_proto = PSMOUSE_PS2; - } - - /* even is psmouse_noext is present psmouse_proto overrides it */ if (psmouse_proto) { if (!strcmp(psmouse_proto, "bare")) psmouse_max_proto = PSMOUSE_PS2; ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 4/7] atkbd option parsing 2004-01-03 9:00 ` [PATCH 3/7] psmouse " Dmitry Torokhov 2004-01-03 9:01 ` [PATCH 4/7] atkbd " Dmitry Torokhov 2004-01-03 10:07 ` [PATCH 3/7] psmouse option parsing Vojtech Pavlik @ 2004-03-29 15:39 ` Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 3/7] psmouse " Vojtech Pavlik 3 siblings, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1574, 2004-01-03 02:45:27-05:00, dtor_core@ameritech.net Input: converted atkbd to the new style of option parsing. If compiled as a module new option names are: set, softrepeat, reset. If built into the kernel options must be prepended with "atkbd." prefix, like "atkbd.softrepeat" Documentation/kernel-parameters.txt | 7 +++--- drivers/input/keyboard/atkbd.c | 40 ++++++++---------------------------- 2 files changed, 13 insertions(+), 34 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Sat Jan 3 03:09:00 2004 +++ b/Documentation/kernel-parameters.txt Sat Jan 3 03:09:00 2004 @@ -153,10 +153,11 @@ atascsi= [HW,SCSI] Atari SCSI - atkbd_set= [HW] Select keyboard code set + atkbd.set= [HW] Select keyboard code set Format: <int> - - atkbd_reset [HW] Reset keyboard during initialization + atkbd.softrepeat= + [HW] Use software keyboard repeat + atkbd.reset= [HW] Reset keyboard during initialization autotest [IA64] diff -Nru a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c --- a/drivers/input/keyboard/atkbd.c Sat Jan 3 03:09:00 2004 +++ b/drivers/input/keyboard/atkbd.c Sat Jan 3 03:09:00 2004 @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/init.h> @@ -29,18 +30,23 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); MODULE_DESCRIPTION("AT and PS/2 keyboard driver"); -MODULE_PARM(atkbd_set, "1i"); -MODULE_PARM(atkbd_reset, "1i"); -MODULE_PARM(atkbd_softrepeat, "1i"); MODULE_LICENSE("GPL"); static int atkbd_set = 2; +module_param_named(set, atkbd_set, int, 0); +MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3, 4)"); + #if defined(__i386__) || defined (__x86_64__) static int atkbd_reset; #else static int atkbd_reset = 1; #endif +module_param_named(reset, atkbd_reset, bool, 0); +MODULE_PARM_DESC(reset, "Reset keyboard during initialization"); + static int atkbd_softrepeat; +module_param_named(softrepeat, atkbd_softrepeat, bool, 0); +MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat"); /* * Scancode to keycode tables. These are just the default setting, and @@ -759,34 +765,6 @@ .disconnect = atkbd_disconnect, .cleanup = atkbd_cleanup, }; - -#ifndef MODULE -static int __init atkbd_setup_set(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) atkbd_set = ints[1]; - return 1; -} -static int __init atkbd_setup_reset(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) atkbd_reset = ints[1]; - return 1; -} -static int __init atkbd_setup_softrepeat(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) atkbd_softrepeat = ints[1]; - return 1; -} - -__setup("atkbd_set=", atkbd_setup_set); -__setup("atkbd_reset", atkbd_setup_reset); -__setup("atkbd_softrepeat=", atkbd_setup_softrepeat); -#endif int __init atkbd_init(void) { ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/7] psmouse option parsing 2004-01-03 9:00 ` [PATCH 3/7] psmouse " Dmitry Torokhov ` (2 preceding siblings ...) 2004-03-29 15:39 ` [PATCH 4/7] atkbd " Dmitry Torokhov @ 2004-03-29 15:39 ` Vojtech Pavlik 3 siblings, 0 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 04:00:54AM -0500, Dmitry Torokhov wrote: > + [HW,MOUSE] Controls Logitech smartscroll autoreteat, > + 0 = disabled, 1 = enabled (default). Ha, a typo. :) -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/7] psmouse option parsing 2004-01-03 8:57 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov 2004-01-03 9:00 ` [PATCH 3/7] psmouse " Dmitry Torokhov @ 2004-03-29 15:39 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1573, 2004-01-02 03:02:35-05:00, dtor_core@ameritech.net Input: With Vojtech's approval adjusted psmouse option names by dropping psmouse_ prefix. If psmouse is compiled as a module new option names are: proto, rate, resetafter, resolution, smartscroll If psmouse is built in the kernel the prefix "psmouse." is required in front of an option, like "psmouse.proto" Also, since we are changing all names, killed psmouse_noext completely Documentation/kernel-parameters.txt | 12 +++++++++--- drivers/input/mouse/psmouse-base.c | 30 ++++++++++-------------------- 2 files changed, 19 insertions(+), 23 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Sat Jan 3 03:08:40 2004 +++ b/Documentation/kernel-parameters.txt Sat Jan 3 03:08:40 2004 @@ -797,12 +797,18 @@ before loading. See Documentation/ramdisk.txt. - psmouse_proto= [HW,MOUSE] Highest PS2 mouse protocol extension to + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for (bare|imps|exps). - - psmouse_resetafter= + psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports + per second. + psmouse.resetafter= [HW,MOUSE] Try to reset Synaptics Touchpad after so many bad packets (0 = never). + psmouse.resolution= + [HW,MOUSE] Set desired mouse resolution, in dpi. + psmouse.smartscroll= + [HW,MOUSE] Controls Logitech smartscroll autoreteat, + 0 = disabled, 1 = enabled (default). pss= [HW,OSS] Personal Sound System (ECHO ESC614) Format: <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> diff -Nru a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c --- a/drivers/input/mouse/psmouse-base.c Sat Jan 3 03:08:40 2004 +++ b/drivers/input/mouse/psmouse-base.c Sat Jan 3 03:08:40 2004 @@ -35,30 +35,26 @@ MODULE_DESCRIPTION("PS/2 mouse driver"); MODULE_LICENSE("GPL"); -static int psmouse_noext; -module_param(psmouse_noext, int, 0); -MODULE_PARM_DESC(psmouse_noext, "[DEPRECATED] Disable any protocol extensions. Useful for KVM switches."); - static char *psmouse_proto; static unsigned int psmouse_max_proto = -1U; -module_param(psmouse_proto, charp, 0); -MODULE_PARM_DESC(psmouse_proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches."); +module_param_named(proto, psmouse_proto, charp, 0); +MODULE_PARM_DESC(proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches."); int psmouse_resolution = 200; -module_param(psmouse_resolution, uint, 0); -MODULE_PARM_DESC(psmouse_resolution, "Resolution, in dpi."); +module_param_named(resolution, psmouse_resolution, uint, 0); +MODULE_PARM_DESC(resolution, "Resolution, in dpi."); unsigned int psmouse_rate = 100; -module_param(psmouse_rate, uint, 0); -MODULE_PARM_DESC(psmouse_rate, "Report rate, in reports per second."); +module_param_named(rate, psmouse_rate, uint, 0); +MODULE_PARM_DESC(rate, "Report rate, in reports per second."); int psmouse_smartscroll = 1; -module_param(psmouse_smartscroll, bool, 0); -MODULE_PARM_DESC(psmouse_smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); +module_param_named(smartscroll, psmouse_smartscroll, bool, 0); +MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); unsigned int psmouse_resetafter; -module_param(psmouse_resetafter, uint, 0); -MODULE_PARM_DESC(psmouse_resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never)."); +module_param_named(resetafter, psmouse_resetafter, uint, 0); +MODULE_PARM_DESC(resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never)."); static char *psmouse_protocols[] = { "None", "PS/2", "PS2++", "PS2T++", "GenPS/2", "ImPS/2", "ImExPS/2", "SynPS/2"}; @@ -674,12 +670,6 @@ static inline void psmouse_parse_proto(void) { - if (psmouse_noext) { - printk(KERN_WARNING "psmouse: 'psmouse_noext' option is deprecated, please use 'psmouse_proto'\n"); - psmouse_max_proto = PSMOUSE_PS2; - } - - /* even is psmouse_noext is present psmouse_proto overrides it */ if (psmouse_proto) { if (!strcmp(psmouse_proto, "bare")) psmouse_max_proto = PSMOUSE_PS2; ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 1/7] i8042 suspend 2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov 2004-01-03 8:57 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov @ 2004-01-03 10:03 ` Vojtech Pavlik 2004-01-03 16:50 ` Dmitry Torokhov 2004-03-29 15:40 ` Dmitry Torokhov 2004-01-18 19:23 ` Russell King ` (2 subsequent siblings) 4 siblings, 2 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-01-03 10:03 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 03:56:45AM -0500, Dmitry Torokhov wrote: > diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c > --- a/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 > +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 > @@ -746,6 +746,29 @@ > > > /* > + * Reset the controller. > + */ > +void i8042_controller_reset(void) > +{ > + if (i8042_reset) { > + unsigned char param; > + > + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) > + printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); > + } We should be checking the return value from the TEST command as well, if we want to use this to initialize the controller on non-x86 platforms (where i8042.reset is 0). > > -/* > - * Reset the controller. > - */ > - > - if (i8042_reset) { > - unsigned char param; > + i8042_controller_reset(); > +} > > - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) > - printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); > - } This actually introduces a bug, because we don't want to restore the CTR setting before we save it, which the new code does. > @@ -809,7 +826,7 @@ > if (i8042_mux_present) > if (i8042_enable_mux_mode(&i8042_aux_values, NULL) || > i8042_enable_mux_ports(&i8042_aux_values)) { > - printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't wotk.\n"); > + printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n"); Ahh, a typo. :) -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 1/7] i8042 suspend 2004-01-03 10:03 ` [PATCH 1/7] i8042 suspend Vojtech Pavlik @ 2004-01-03 16:50 ` Dmitry Torokhov 2004-03-29 15:40 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-03 16:50 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel On Saturday 03 January 2004 05:03 am, Vojtech Pavlik wrote: > On Sat, Jan 03, 2004 at 03:56:45AM -0500, Dmitry Torokhov wrote: > > diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c > > --- a/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 > > +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 > > @@ -746,6 +746,29 @@ > > > > > > /* > > + * Reset the controller. > > + */ > > +void i8042_controller_reset(void) > > +{ > > + if (i8042_reset) { > > + unsigned char param; > > + > > + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) > > + printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); > > + } > > We should be checking the return value from the TEST command as well, > if we want to use this to initialize the controller on non-x86 > platforms (where i8042.reset is 0). > > > -/* > > - * Reset the controller. > > - */ > > - > > - if (i8042_reset) { > > - unsigned char param; > > + i8042_controller_reset(); > > +} > > > > - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) > > - printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); > > - } > > This actually introduces a bug, because we don't want to restore the > CTR setting before we save it, which the new code does. > Hmm, I do not see it. i8042_controller_reset() is only called on suspend/ shutdown. The init path where we vigorously testing the hardware and saving initial CTR value was left intact. As far as checking the return value we usualy give some leniency on suspend/ shutdown and don't fail the entire process when there are non-clitical errors. Or am I missing something? Dmitry ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 1/7] i8042 suspend 2004-01-03 10:03 ` [PATCH 1/7] i8042 suspend Vojtech Pavlik 2004-01-03 16:50 ` Dmitry Torokhov @ 2004-03-29 15:40 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:40 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel On Saturday 03 January 2004 05:03 am, Vojtech Pavlik wrote: > On Sat, Jan 03, 2004 at 03:56:45AM -0500, Dmitry Torokhov wrote: > > diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c > > --- a/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 > > +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 > > @@ -746,6 +746,29 @@ > > > > > > /* > > + * Reset the controller. > > + */ > > +void i8042_controller_reset(void) > > +{ > > + if (i8042_reset) { > > + unsigned char param; > > + > > + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) > > + printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); > > + } > > We should be checking the return value from the TEST command as well, > if we want to use this to initialize the controller on non-x86 > platforms (where i8042.reset is 0). > > > -/* > > - * Reset the controller. > > - */ > > - > > - if (i8042_reset) { > > - unsigned char param; > > + i8042_controller_reset(); > > +} > > > > - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) > > - printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); > > - } > > This actually introduces a bug, because we don't want to restore the > CTR setting before we save it, which the new code does. > Hmm, I do not see it. i8042_controller_reset() is only called on suspend/ shutdown. The init path where we vigorously testing the hardware and saving initial CTR value was left intact. As far as checking the return value we usualy give some leniency on suspend/ shutdown and don't fail the entire process when there are non-clitical errors. Or am I missing something? Dmitry ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 1/7] i8042 suspend 2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov 2004-01-03 8:57 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov 2004-01-03 10:03 ` [PATCH 1/7] i8042 suspend Vojtech Pavlik @ 2004-01-18 19:23 ` Russell King 2004-01-18 22:42 ` Dmitry Torokhov 2004-03-29 15:39 ` Vojtech Pavlik 2004-03-29 15:39 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov 4 siblings, 1 reply; 39+ messages in thread From: Russell King @ 2004-01-18 19:23 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 03:56:45AM -0500, Dmitry Torokhov wrote: > =================================================================== > > > ChangeSet@1.1571, 2004-01-02 00:22:32-05:00, dtor_core@ameritech.net > Input: Add suspend methods to restore original controller state > on suspend as some BIOS don't like the state we leave it in. > Also synchroniously delete the polling timer on module exit. > > > i8042.c | 76 +++++++++++++++++++++++++++++++++++++++++++++------------------- > 1 files changed, 54 insertions(+), 22 deletions(-) Anyone know what the state of this patch is? I notice that the 2.6-merged i8042.c still doesn't disable the polling timer on suspend. -- Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/ 2.6 Serial core ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 1/7] i8042 suspend 2004-01-18 19:23 ` Russell King @ 2004-01-18 22:42 ` Dmitry Torokhov 0 siblings, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-18 22:42 UTC (permalink / raw) To: Russell King; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sunday 18 January 2004 02:23 pm, Russell King wrote: > On Sat, Jan 03, 2004 at 03:56:45AM -0500, Dmitry Torokhov wrote: > > =================================================================== > > > > > > ChangeSet@1.1571, 2004-01-02 00:22:32-05:00, dtor_core@ameritech.net > > Input: Add suspend methods to restore original controller state > > on suspend as some BIOS don't like the state we leave it in. > > Also synchroniously delete the polling timer on module exit. > > > > > > i8042.c | 76 > > +++++++++++++++++++++++++++++++++++++++++++++------------------- 1 > > files changed, 54 insertions(+), 22 deletions(-) > > Anyone know what the state of this patch is? I notice that the > 2.6-merged i8042.c still doesn't disable the polling timer on suspend. I believe it's in latest -mm and Andrew was going to push it to Linus. -- Dmitry ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 1/7] i8042 suspend 2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov ` (2 preceding siblings ...) 2004-01-18 19:23 ` Russell King @ 2004-03-29 15:39 ` Vojtech Pavlik 2004-03-29 15:39 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov 4 siblings, 0 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 03:56:45AM -0500, Dmitry Torokhov wrote: > diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c > --- a/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 > +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 > @@ -746,6 +746,29 @@ > > > /* > + * Reset the controller. > + */ > +void i8042_controller_reset(void) > +{ > + if (i8042_reset) { > + unsigned char param; > + > + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) > + printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); > + } We should be checking the return value from the TEST command as well, if we want to use this to initialize the controller on non-x86 platforms (where i8042.reset is 0). > > -/* > - * Reset the controller. > - */ > - > - if (i8042_reset) { > - unsigned char param; > + i8042_controller_reset(); > +} > > - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) > - printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); > - } This actually introduces a bug, because we don't want to restore the CTR setting before we save it, which the new code does. > @@ -809,7 +826,7 @@ > if (i8042_mux_present) > if (i8042_enable_mux_mode(&i8042_aux_values, NULL) || > i8042_enable_mux_ports(&i8042_aux_values)) { > - printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't wotk.\n"); > + printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n"); Ahh, a typo. :) -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 2/7] i8042 option parsing 2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov ` (3 preceding siblings ...) 2004-03-29 15:39 ` Vojtech Pavlik @ 2004-03-29 15:39 ` Dmitry Torokhov 4 siblings, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1572, 2004-01-02 02:46:43-05:00, dtor_core@ameritech.net Input: With Vojtech's approval adjusted i8042 option names by dropping i8042_ prefix. If i8042 is compiled as a module new option names are: direct, dumbkbd, noaux, nomux, reset, unlock If i8042 is build in the kernel the prefix "i8042." is required in front of an option, like "i8042.reset" Documentation/kernel-parameters.txt | 16 +++++++++------- drivers/input/serio/i8042.c | 18 ++++++++++++------ 2 files changed, 21 insertions(+), 13 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Sat Jan 3 03:08:12 2004 +++ b/Documentation/kernel-parameters.txt Sat Jan 3 03:08:12 2004 @@ -372,13 +372,15 @@ noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing - i8042_direct [HW] Keyboard has been put into non-translated mode - by BIOS - i8042_dumbkbd [HW] Don't attempt to blink the leds - i8042_noaux [HW] Don't check for auxiliary (== mouse) port - i8042_nomux - i8042_reset [HW] Reset the controller during init and cleanup - i8042_unlock [HW] Unlock (ignore) the keylock + i8042.direct [HW] Put keyboard port into non-translated mode + i8042.dumbkbd [HW] Pretend that controlled can only read data from + keyboard and can not control its state + (Don't attempt to blink the leds) + i8042.noaux [HW] Don't check for auxiliary (== mouse) port + i8042.nomux [HW] Don't check presence of an active multiplexing + controller + i8042.reset [HW] Reset the controller during init and cleanup + i8042.unlock [HW] Unlock (ignore) the keylock i810= [HW,DRM] diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c --- a/drivers/input/serio/i8042.c Sat Jan 3 03:08:12 2004 +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:08:12 2004 @@ -29,22 +29,28 @@ MODULE_LICENSE("GPL"); static unsigned int i8042_noaux; -module_param(i8042_noaux, bool, 0); +module_param_named(noaux, i8042_noaux, bool, 0); +MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); static unsigned int i8042_nomux; -module_param(i8042_nomux, bool, 0); +module_param_named(nomux, i8042_nomux, bool, 0); +MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present."); static unsigned int i8042_unlock; -module_param(i8042_unlock, bool, 0); +module_param_named(unlock, i8042_unlock, bool, 0); +MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); static unsigned int i8042_reset; -module_param(i8042_reset, bool, 0); +module_param_named(reset, i8042_reset, bool, 0); +MODULE_PARM_DESC(reset, "Reset controller during init and cleanup."); static unsigned int i8042_direct; -module_param(i8042_direct, bool, 0); +module_param_named(direct, i8042_direct, bool, 0); +MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode."); static unsigned int i8042_dumbkbd; -module_param(i8042_dumbkbd, bool, 0); +module_param_named(dumbkbd, i8042_dumbkbd, bool, 0); +MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard"); #undef DEBUG #include "i8042.h" ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: New set of input patches 2004-01-03 8:50 New set of input patches Dmitry Torokhov 2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov @ 2004-01-03 10:10 ` Vojtech Pavlik 2004-01-05 5:59 ` Dmitry Torokhov ` (3 subsequent siblings) 5 siblings, 0 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-01-03 10:10 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 03:50:43AM -0500, Dmitry Torokhov wrote: > Hi Vojtech, > > I have a new set of input patches, could you take look at them? > > 1. i8042-suspend.patch > Add suspend methods to i8042 to restore BIOS settings on suspend and > kill polling timer which sometimes prevents APM suspend > See comments. > 2. i8042-options-parsing.patch > psmouse-options-parsing.patch See comments. > atkbd-options.parsing > Complete conversion to the new way of parsing parameters. Drop "i8042_", > "psmouse_" and "atkbd_" prefixes from option names when compiled as a > module and require "i8042.", "psmouse." and "atkbd." prefixes if built > into the kernel. > > 3. missing-module-license.patch > Maple and newton keyboard drivers were missing MODULE_LICENSE("GPL") > > 4. kconfig-synaptics-help.patch > Suggest psmouse.proto=imps to Synaptics users who do not want install > native XFree Synaptics driver so taps would still work > > 5. sis-aux-port.patch > Do not ignore AUX port if chipset fails to disable it when we do probes > as SiS is having trouble disabling but otherwise mouse works fine. All patches except the first one are OK, in psmouse-options, there is a little typo. -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: New set of input patches 2004-01-03 8:50 New set of input patches Dmitry Torokhov 2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov 2004-01-03 10:10 ` New set of input patches Vojtech Pavlik @ 2004-01-05 5:59 ` Dmitry Torokhov 2004-01-05 6:01 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov ` (3 more replies) 2004-03-29 15:39 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov ` (2 subsequent siblings) 5 siblings, 4 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-05 5:59 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel I made 3 more input patches: - compile fix in 98busmose driver (it still had its interrupt routine returning voooid instead of irqreturn_t) - the rest of mouse devices converted to the new way of handling kernel parameters and document them in kernel-parametes.txt - convert tsdev module to the new way of handling kernel parameters and document them in kernle-parameters.txt. The patches can be found at the following addresses: http://www.geocities.com/dt_or/input/2_6_1-rc1/ http://www.geocities.com/dt_or/input/2_6_1-rc1-mm1/ Vojtech, Andrew, are you interested in these kind of patches and should I take a stab at converting joysticks diectory as well? Dmitry ^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 1/3] Fix compile error in 98busmouse.c module 2004-01-05 5:59 ` Dmitry Torokhov @ 2004-01-05 6:01 ` Dmitry Torokhov 2004-01-05 6:02 ` [PATCH 2/3] Convert mouse drivers to use module_param Dmitry Torokhov 2004-03-29 15:44 ` [PATCH 2/3] Convert mouse drivers " Dmitry Torokhov 2004-01-05 8:36 ` New set of input patches Vojtech Pavlik ` (2 subsequent siblings) 3 siblings, 2 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-05 6:01 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1580, 2004-01-04 23:57:27-05:00, dtor_core@ameritech.net Input: Fix 98busmouse compile error - have interrupt routine return IRQ_HANDLED 98busmouse.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) =================================================================== diff -Nru a/drivers/input/mouse/98busmouse.c b/drivers/input/mouse/98busmouse.c --- a/drivers/input/mouse/98busmouse.c Mon Jan 5 00:45:57 2004 +++ b/drivers/input/mouse/98busmouse.c Mon Jan 5 00:45:57 2004 @@ -74,7 +74,7 @@ static int pc98bm_irq = PC98BM_IRQ; static int pc98bm_used = 0; -static void pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs); static int pc98bm_open(struct input_dev *dev) { @@ -113,7 +113,7 @@ }, }; -static void pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs) { char dx, dy; unsigned char buttons; @@ -137,6 +137,8 @@ input_sync(&pc98bm_dev); outb(PC98BM_ENABLE_IRQ, PC98BM_CONTROL_PORT); + + return IRQ_HANDLED; } #ifndef MODULE ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 2/3] Convert mouse drivers to use module_param 2004-01-05 6:01 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov @ 2004-01-05 6:02 ` Dmitry Torokhov 2004-01-05 6:03 ` [PATCH 3/3] Convert tsdev " Dmitry Torokhov 2004-03-29 15:44 ` Dmitry Torokhov 2004-03-29 15:44 ` [PATCH 2/3] Convert mouse drivers " Dmitry Torokhov 1 sibling, 2 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-05 6:02 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1581, 2004-01-05 00:25:23-05:00, dtor_core@ameritech.net Input: convert the rest of mouse devices to the new way of handling kernel parameters and document them in kernel-parameters.txt Documentation/kernel-parameters.txt | 12 ++++++++++-- drivers/input/mouse/98busmouse.c | 17 ++++------------- drivers/input/mouse/inport.c | 19 +++++-------------- drivers/input/mouse/logibm.c | 17 ++++------------- drivers/input/mousedev.c | 17 +++++++++-------- 5 files changed, 32 insertions(+), 50 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Mon Jan 5 00:46:29 2004 +++ b/Documentation/kernel-parameters.txt Mon Jan 5 00:46:29 2004 @@ -85,6 +85,9 @@ See header of drivers/scsi/53c7xx.c. See also Documentation/scsi/ncr53c7xx.txt. + 98busmouse.irq= [HW,MOUSE] PC-9801 Bus Mouse Driver + Format: <irq>, default is 13 + acpi= [HW,ACPI] Advanced Configuration and Power Interface Format: { force | off | ht } force -- enables ACPI for systems with default off @@ -417,7 +420,7 @@ initrd= [BOOT] Specify the location of the initial ramdisk - inport_irq= [HW] Inport (ATI XL and Microsoft) busmouse driver + inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver Format: <irq> inttest= [IA64] @@ -465,7 +468,7 @@ lockd.tcpport= [NFS] - logibm_irq= [HW,MOUSE] Logitech Bus Mouse Driver + logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver Format: <irq> log_buf_len=n Sets the size of the printk ring buffer, in bytes. @@ -564,6 +567,11 @@ See Documentation/video4linux/meye.txt. mga= [HW,DRM] + + mousedev.xres [MOUSE] Horizontal screen resolution, used for devices + reporting absolute coordinates, such as tablets + mousedev.yres [MOUSE] Vertical screen resolution, used for devices + reporting absolute coordinates, such as tablets mpu401= [HW,OSS] Format: <io>,<irq> diff -Nru a/drivers/input/mouse/98busmouse.c b/drivers/input/mouse/98busmouse.c --- a/drivers/input/mouse/98busmouse.c Mon Jan 5 00:46:29 2004 +++ b/drivers/input/mouse/98busmouse.c Mon Jan 5 00:46:29 2004 @@ -33,6 +33,7 @@ #include <linux/config.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/init.h> @@ -69,9 +70,10 @@ #define PC98BM_IRQ 13 -MODULE_PARM(pc98bm_irq, "i"); - static int pc98bm_irq = PC98BM_IRQ; +module_param_named(irq, pc98bm_irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ number (13=default)"); + static int pc98bm_used = 0; static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs); @@ -140,17 +142,6 @@ return IRQ_HANDLED; } - -#ifndef MODULE -static int __init pc98bm_setup(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) pc98bm_irq = ints[1]; - return 1; -} -__setup("pc98bm_irq=", pc98bm_setup); -#endif static int __init pc98bm_init(void) { diff -Nru a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c --- a/drivers/input/mouse/inport.c Mon Jan 5 00:46:29 2004 +++ b/drivers/input/mouse/inport.c Mon Jan 5 00:46:29 2004 @@ -35,6 +35,7 @@ */ #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/config.h> #include <linux/ioport.h> #include <linux/init.h> @@ -80,10 +81,11 @@ #define INPORT_IRQ 5 -MODULE_PARM(inport_irq, "i"); - static int inport_irq = INPORT_IRQ; -static int inport_used = 0; +module_param_named(irq, inport_irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ number (5=default)"); + +static int inport_used; static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs); @@ -152,17 +154,6 @@ input_sync(&inport_dev); return IRQ_HANDLED; } - -#ifndef MODULE -static int __init inport_setup(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) inport_irq = ints[1]; - return 1; -} -__setup("inport_irq=", inport_setup); -#endif static int __init inport_init(void) { diff -Nru a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c --- a/drivers/input/mouse/logibm.c Mon Jan 5 00:46:29 2004 +++ b/drivers/input/mouse/logibm.c Mon Jan 5 00:46:29 2004 @@ -36,6 +36,7 @@ */ #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/init.h> @@ -70,9 +71,10 @@ #define LOGIBM_IRQ 5 -MODULE_PARM(logibm_irq, "i"); - static int logibm_irq = LOGIBM_IRQ; +module_param_named(irq, logibm_irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ number (5=default)"); + static int logibm_used = 0; static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs); @@ -141,17 +143,6 @@ outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); return IRQ_HANDLED; } - -#ifndef MODULE -static int __init logibm_setup(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) logibm_irq = ints[1]; - return 1; -} -__setup("logibm_irq=", logibm_setup); -#endif static int __init logibm_init(void) { diff -Nru a/drivers/input/mousedev.c b/drivers/input/mousedev.c --- a/drivers/input/mousedev.c Mon Jan 5 00:46:29 2004 +++ b/drivers/input/mousedev.c Mon Jan 5 00:46:29 2004 @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/poll.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/input.h> #include <linux/config.h> @@ -38,6 +39,14 @@ #define CONFIG_INPUT_MOUSEDEV_SCREEN_Y 768 #endif +static int xres = CONFIG_INPUT_MOUSEDEV_SCREEN_X; +module_param(xres, uint, 0); +MODULE_PARM_DESC(xres, "Horizontal screen resolution"); + +static int yres = CONFIG_INPUT_MOUSEDEV_SCREEN_Y; +module_param(yres, uint, 0); +MODULE_PARM_DESC(yres, "Vertical screen resolution"); + struct mousedev { int exist; int open; @@ -73,9 +82,6 @@ static struct mousedev *mousedev_table[MOUSEDEV_MINORS]; static struct mousedev mousedev_mix; -static int xres = CONFIG_INPUT_MOUSEDEV_SCREEN_X; -static int yres = CONFIG_INPUT_MOUSEDEV_SCREEN_Y; - #define fx(i) (list->old_x[(list->pkt_count - (i)) & 03]) #define fy(i) (list->old_y[(list->pkt_count - (i)) & 03]) @@ -582,8 +588,3 @@ module_init(mousedev_init); module_exit(mousedev_exit); - -MODULE_PARM(xres, "i"); -MODULE_PARM_DESC(xres, "Horizontal screen resolution"); -MODULE_PARM(yres, "i"); -MODULE_PARM_DESC(yres, "Vertical screen resolution"); ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/3] Convert tsdev to use module_param 2004-01-05 6:02 ` [PATCH 2/3] Convert mouse drivers to use module_param Dmitry Torokhov @ 2004-01-05 6:03 ` Dmitry Torokhov 2004-03-29 15:44 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-01-05 6:03 UTC (permalink / raw) To: Vojtech Pavlik; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1582, 2004-01-05 00:36:03-05:00, dtor_core@ameritech.net Input: convert tsdev to the new way of handling parameters and document them in kernel-parameters.txt Documentation/kernel-parameters.txt | 6 +++++- drivers/input/tsdev.c | 23 +++++++++++++---------- 2 files changed, 18 insertions(+), 11 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Mon Jan 5 00:46:48 2004 +++ b/Documentation/kernel-parameters.txt Mon Jan 5 00:46:48 2004 @@ -37,7 +37,7 @@ MCA MCA bus support is enabled. MDA MDA console support is enabled. MOUSE Appropriate mouse support is enabled. - MTD MTD support is nebaled. + MTD MTD support is enabled. NET Appropriate network support is enabled. NFS Appropriate NFS support is enabled. OSS OSS sound support is enabled. @@ -57,6 +57,7 @@ SMP The kernel is an SMP kernel. SPARC Sparc architecture is enabled. SWSUSP Software suspension is enabled. + TS Appropriate touchscreen support is enabled. USB USB support is enabled. V4L Video For Linux support is enabled. VGA The VGA console has been enabled. @@ -1135,6 +1136,9 @@ trix= [HW,OSS] MediaTrix AudioTrix Pro Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> + tsdev.xres [TS] Horizontal screen resolution. + tsdev.yres [TS] Vertical screen resolution. + u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter See header of drivers/scsi/u14-34f.c. diff -Nru a/drivers/input/tsdev.c b/drivers/input/tsdev.c --- a/drivers/input/tsdev.c Mon Jan 5 00:46:48 2004 +++ b/drivers/input/tsdev.c Mon Jan 5 00:46:48 2004 @@ -34,6 +34,7 @@ #include <linux/slab.h> #include <linux/poll.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/input.h> #include <linux/major.h> @@ -51,6 +52,18 @@ #define CONFIG_INPUT_TSDEV_SCREEN_Y 320 #endif +MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>"); +MODULE_DESCRIPTION("Input driver to touchscreen converter"); +MODULE_LICENSE("GPL"); + +static int xres = CONFIG_INPUT_TSDEV_SCREEN_X; +module_param(xres, uint, 0); +MODULE_PARM_DESC(xres, "Horizontal screen resolution"); + +static int yres = CONFIG_INPUT_TSDEV_SCREEN_Y; +module_param(yres, uint, 0); +MODULE_PARM_DESC(yres, "Vertical screen resolution"); + struct tsdev { int exist; int open; @@ -82,9 +95,6 @@ static struct tsdev *tsdev_table[TSDEV_MINORS]; -static int xres = CONFIG_INPUT_TSDEV_SCREEN_X; -static int yres = CONFIG_INPUT_TSDEV_SCREEN_Y; - static int tsdev_fasync(int fd, struct file *file, int on) { struct tsdev_list *list = file->private_data; @@ -394,10 +404,3 @@ module_init(tsdev_init); module_exit(tsdev_exit); - -MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>"); -MODULE_DESCRIPTION("Input driver to touchscreen converter"); -MODULE_PARM(xres, "i"); -MODULE_PARM_DESC(xres, "Horizontal screen resolution"); -MODULE_PARM(yres, "i"); -MODULE_PARM_DESC(yres, "Vertical screen resolution"); ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 3/3] Convert tsdev to use module_param 2004-01-05 6:02 ` [PATCH 2/3] Convert mouse drivers to use module_param Dmitry Torokhov 2004-01-05 6:03 ` [PATCH 3/3] Convert tsdev " Dmitry Torokhov @ 2004-03-29 15:44 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:44 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1582, 2004-01-05 00:36:03-05:00, dtor_core@ameritech.net Input: convert tsdev to the new way of handling parameters and document them in kernel-parameters.txt Documentation/kernel-parameters.txt | 6 +++++- drivers/input/tsdev.c | 23 +++++++++++++---------- 2 files changed, 18 insertions(+), 11 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Mon Jan 5 00:46:48 2004 +++ b/Documentation/kernel-parameters.txt Mon Jan 5 00:46:48 2004 @@ -37,7 +37,7 @@ MCA MCA bus support is enabled. MDA MDA console support is enabled. MOUSE Appropriate mouse support is enabled. - MTD MTD support is nebaled. + MTD MTD support is enabled. NET Appropriate network support is enabled. NFS Appropriate NFS support is enabled. OSS OSS sound support is enabled. @@ -57,6 +57,7 @@ SMP The kernel is an SMP kernel. SPARC Sparc architecture is enabled. SWSUSP Software suspension is enabled. + TS Appropriate touchscreen support is enabled. USB USB support is enabled. V4L Video For Linux support is enabled. VGA The VGA console has been enabled. @@ -1135,6 +1136,9 @@ trix= [HW,OSS] MediaTrix AudioTrix Pro Format: <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> + tsdev.xres [TS] Horizontal screen resolution. + tsdev.yres [TS] Vertical screen resolution. + u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter See header of drivers/scsi/u14-34f.c. diff -Nru a/drivers/input/tsdev.c b/drivers/input/tsdev.c --- a/drivers/input/tsdev.c Mon Jan 5 00:46:48 2004 +++ b/drivers/input/tsdev.c Mon Jan 5 00:46:48 2004 @@ -34,6 +34,7 @@ #include <linux/slab.h> #include <linux/poll.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/input.h> #include <linux/major.h> @@ -51,6 +52,18 @@ #define CONFIG_INPUT_TSDEV_SCREEN_Y 320 #endif +MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>"); +MODULE_DESCRIPTION("Input driver to touchscreen converter"); +MODULE_LICENSE("GPL"); + +static int xres = CONFIG_INPUT_TSDEV_SCREEN_X; +module_param(xres, uint, 0); +MODULE_PARM_DESC(xres, "Horizontal screen resolution"); + +static int yres = CONFIG_INPUT_TSDEV_SCREEN_Y; +module_param(yres, uint, 0); +MODULE_PARM_DESC(yres, "Vertical screen resolution"); + struct tsdev { int exist; int open; @@ -82,9 +95,6 @@ static struct tsdev *tsdev_table[TSDEV_MINORS]; -static int xres = CONFIG_INPUT_TSDEV_SCREEN_X; -static int yres = CONFIG_INPUT_TSDEV_SCREEN_Y; - static int tsdev_fasync(int fd, struct file *file, int on) { struct tsdev_list *list = file->private_data; @@ -394,10 +404,3 @@ module_init(tsdev_init); module_exit(tsdev_exit); - -MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>"); -MODULE_DESCRIPTION("Input driver to touchscreen converter"); -MODULE_PARM(xres, "i"); -MODULE_PARM_DESC(xres, "Horizontal screen resolution"); -MODULE_PARM(yres, "i"); -MODULE_PARM_DESC(yres, "Vertical screen resolution"); ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH 2/3] Convert mouse drivers to use module_param 2004-01-05 6:01 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov 2004-01-05 6:02 ` [PATCH 2/3] Convert mouse drivers to use module_param Dmitry Torokhov @ 2004-03-29 15:44 ` Dmitry Torokhov 1 sibling, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:44 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1581, 2004-01-05 00:25:23-05:00, dtor_core@ameritech.net Input: convert the rest of mouse devices to the new way of handling kernel parameters and document them in kernel-parameters.txt Documentation/kernel-parameters.txt | 12 ++++++++++-- drivers/input/mouse/98busmouse.c | 17 ++++------------- drivers/input/mouse/inport.c | 19 +++++-------------- drivers/input/mouse/logibm.c | 17 ++++------------- drivers/input/mousedev.c | 17 +++++++++-------- 5 files changed, 32 insertions(+), 50 deletions(-) =================================================================== diff -Nru a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Mon Jan 5 00:46:29 2004 +++ b/Documentation/kernel-parameters.txt Mon Jan 5 00:46:29 2004 @@ -85,6 +85,9 @@ See header of drivers/scsi/53c7xx.c. See also Documentation/scsi/ncr53c7xx.txt. + 98busmouse.irq= [HW,MOUSE] PC-9801 Bus Mouse Driver + Format: <irq>, default is 13 + acpi= [HW,ACPI] Advanced Configuration and Power Interface Format: { force | off | ht } force -- enables ACPI for systems with default off @@ -417,7 +420,7 @@ initrd= [BOOT] Specify the location of the initial ramdisk - inport_irq= [HW] Inport (ATI XL and Microsoft) busmouse driver + inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver Format: <irq> inttest= [IA64] @@ -465,7 +468,7 @@ lockd.tcpport= [NFS] - logibm_irq= [HW,MOUSE] Logitech Bus Mouse Driver + logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver Format: <irq> log_buf_len=n Sets the size of the printk ring buffer, in bytes. @@ -564,6 +567,11 @@ See Documentation/video4linux/meye.txt. mga= [HW,DRM] + + mousedev.xres [MOUSE] Horizontal screen resolution, used for devices + reporting absolute coordinates, such as tablets + mousedev.yres [MOUSE] Vertical screen resolution, used for devices + reporting absolute coordinates, such as tablets mpu401= [HW,OSS] Format: <io>,<irq> diff -Nru a/drivers/input/mouse/98busmouse.c b/drivers/input/mouse/98busmouse.c --- a/drivers/input/mouse/98busmouse.c Mon Jan 5 00:46:29 2004 +++ b/drivers/input/mouse/98busmouse.c Mon Jan 5 00:46:29 2004 @@ -33,6 +33,7 @@ #include <linux/config.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/init.h> @@ -69,9 +70,10 @@ #define PC98BM_IRQ 13 -MODULE_PARM(pc98bm_irq, "i"); - static int pc98bm_irq = PC98BM_IRQ; +module_param_named(irq, pc98bm_irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ number (13=default)"); + static int pc98bm_used = 0; static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs); @@ -140,17 +142,6 @@ return IRQ_HANDLED; } - -#ifndef MODULE -static int __init pc98bm_setup(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) pc98bm_irq = ints[1]; - return 1; -} -__setup("pc98bm_irq=", pc98bm_setup); -#endif static int __init pc98bm_init(void) { diff -Nru a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c --- a/drivers/input/mouse/inport.c Mon Jan 5 00:46:29 2004 +++ b/drivers/input/mouse/inport.c Mon Jan 5 00:46:29 2004 @@ -35,6 +35,7 @@ */ #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/config.h> #include <linux/ioport.h> #include <linux/init.h> @@ -80,10 +81,11 @@ #define INPORT_IRQ 5 -MODULE_PARM(inport_irq, "i"); - static int inport_irq = INPORT_IRQ; -static int inport_used = 0; +module_param_named(irq, inport_irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ number (5=default)"); + +static int inport_used; static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs); @@ -152,17 +154,6 @@ input_sync(&inport_dev); return IRQ_HANDLED; } - -#ifndef MODULE -static int __init inport_setup(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) inport_irq = ints[1]; - return 1; -} -__setup("inport_irq=", inport_setup); -#endif static int __init inport_init(void) { diff -Nru a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c --- a/drivers/input/mouse/logibm.c Mon Jan 5 00:46:29 2004 +++ b/drivers/input/mouse/logibm.c Mon Jan 5 00:46:29 2004 @@ -36,6 +36,7 @@ */ #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/init.h> @@ -70,9 +71,10 @@ #define LOGIBM_IRQ 5 -MODULE_PARM(logibm_irq, "i"); - static int logibm_irq = LOGIBM_IRQ; +module_param_named(irq, logibm_irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ number (5=default)"); + static int logibm_used = 0; static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs); @@ -141,17 +143,6 @@ outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); return IRQ_HANDLED; } - -#ifndef MODULE -static int __init logibm_setup(char *str) -{ - int ints[4]; - str = get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) logibm_irq = ints[1]; - return 1; -} -__setup("logibm_irq=", logibm_setup); -#endif static int __init logibm_init(void) { diff -Nru a/drivers/input/mousedev.c b/drivers/input/mousedev.c --- a/drivers/input/mousedev.c Mon Jan 5 00:46:29 2004 +++ b/drivers/input/mousedev.c Mon Jan 5 00:46:29 2004 @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/poll.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/input.h> #include <linux/config.h> @@ -38,6 +39,14 @@ #define CONFIG_INPUT_MOUSEDEV_SCREEN_Y 768 #endif +static int xres = CONFIG_INPUT_MOUSEDEV_SCREEN_X; +module_param(xres, uint, 0); +MODULE_PARM_DESC(xres, "Horizontal screen resolution"); + +static int yres = CONFIG_INPUT_MOUSEDEV_SCREEN_Y; +module_param(yres, uint, 0); +MODULE_PARM_DESC(yres, "Vertical screen resolution"); + struct mousedev { int exist; int open; @@ -73,9 +82,6 @@ static struct mousedev *mousedev_table[MOUSEDEV_MINORS]; static struct mousedev mousedev_mix; -static int xres = CONFIG_INPUT_MOUSEDEV_SCREEN_X; -static int yres = CONFIG_INPUT_MOUSEDEV_SCREEN_Y; - #define fx(i) (list->old_x[(list->pkt_count - (i)) & 03]) #define fy(i) (list->old_y[(list->pkt_count - (i)) & 03]) @@ -582,8 +588,3 @@ module_init(mousedev_init); module_exit(mousedev_exit); - -MODULE_PARM(xres, "i"); -MODULE_PARM_DESC(xres, "Horizontal screen resolution"); -MODULE_PARM(yres, "i"); -MODULE_PARM_DESC(yres, "Vertical screen resolution"); ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: New set of input patches 2004-01-05 5:59 ` Dmitry Torokhov 2004-01-05 6:01 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov @ 2004-01-05 8:36 ` Vojtech Pavlik 2004-03-29 15:44 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov 2004-03-29 15:44 ` New set of input patches Vojtech Pavlik 3 siblings, 0 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-01-05 8:36 UTC (permalink / raw) To: Dmitry Torokhov; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Mon, Jan 05, 2004 at 12:59:24AM -0500, Dmitry Torokhov wrote: > I made 3 more input patches: > > - compile fix in 98busmose driver (it still had its interrupt routine > returning voooid instead of irqreturn_t) > - the rest of mouse devices converted to the new way of handling kernel > parameters and document them in kernel-parametes.txt > - convert tsdev module to the new way of handling kernel parameters and > document them in kernle-parameters.txt. > > The patches can be found at the following addresses: > http://www.geocities.com/dt_or/input/2_6_1-rc1/ > http://www.geocities.com/dt_or/input/2_6_1-rc1-mm1/ > > Vojtech, Andrew, > > are you interested in these kind of patches and should I take a stab at > converting joysticks diectory as well? Yup, I am. :) Not sure if it's 2.6.[12] stuff, but it needs to be done sooner or later. -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 1/3] Fix compile error in 98busmouse.c module 2004-01-05 5:59 ` Dmitry Torokhov 2004-01-05 6:01 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov 2004-01-05 8:36 ` New set of input patches Vojtech Pavlik @ 2004-03-29 15:44 ` Dmitry Torokhov 2004-03-29 15:44 ` New set of input patches Vojtech Pavlik 3 siblings, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:44 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1580, 2004-01-04 23:57:27-05:00, dtor_core@ameritech.net Input: Fix 98busmouse compile error - have interrupt routine return IRQ_HANDLED 98busmouse.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) =================================================================== diff -Nru a/drivers/input/mouse/98busmouse.c b/drivers/input/mouse/98busmouse.c --- a/drivers/input/mouse/98busmouse.c Mon Jan 5 00:45:57 2004 +++ b/drivers/input/mouse/98busmouse.c Mon Jan 5 00:45:57 2004 @@ -74,7 +74,7 @@ static int pc98bm_irq = PC98BM_IRQ; static int pc98bm_used = 0; -static void pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs); static int pc98bm_open(struct input_dev *dev) { @@ -113,7 +113,7 @@ }, }; -static void pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs) { char dx, dy; unsigned char buttons; @@ -137,6 +137,8 @@ input_sync(&pc98bm_dev); outb(PC98BM_ENABLE_IRQ, PC98BM_CONTROL_PORT); + + return IRQ_HANDLED; } #ifndef MODULE ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: New set of input patches 2004-01-05 5:59 ` Dmitry Torokhov ` (2 preceding siblings ...) 2004-03-29 15:44 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov @ 2004-03-29 15:44 ` Vojtech Pavlik 3 siblings, 0 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-03-29 15:44 UTC (permalink / raw) To: Administrator; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Mon, Jan 05, 2004 at 12:59:24AM -0500, Dmitry Torokhov wrote: > I made 3 more input patches: > > - compile fix in 98busmose driver (it still had its interrupt routine > returning voooid instead of irqreturn_t) > - the rest of mouse devices converted to the new way of handling kernel > parameters and document them in kernel-parametes.txt > - convert tsdev module to the new way of handling kernel parameters and > document them in kernle-parameters.txt. > > The patches can be found at the following addresses: > http://www.geocities.com/dt_or/input/2_6_1-rc1/ > http://www.geocities.com/dt_or/input/2_6_1-rc1-mm1/ > > Vojtech, Andrew, > > are you interested in these kind of patches and should I take a stab at > converting joysticks diectory as well? Yup, I am. :) Not sure if it's 2.6.[12] stuff, but it needs to be done sooner or later. -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH 1/7] i8042 suspend 2004-01-03 8:50 New set of input patches Dmitry Torokhov ` (2 preceding siblings ...) 2004-01-05 5:59 ` Dmitry Torokhov @ 2004-03-29 15:39 ` Dmitry Torokhov 2004-03-29 15:39 ` New set of input patches Vojtech Pavlik 2004-03-29 15:44 ` Dmitry Torokhov 5 siblings, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel =================================================================== ChangeSet@1.1571, 2004-01-02 00:22:32-05:00, dtor_core@ameritech.net Input: Add suspend methods to restore original controller state on suspend as some BIOS don't like the state we leave it in. Also synchroniously delete the polling timer on module exit. i8042.c | 76 +++++++++++++++++++++++++++++++++++++++++++++------------------- 1 files changed, 54 insertions(+), 22 deletions(-) =================================================================== diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c --- a/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 +++ b/drivers/input/serio/i8042.c Sat Jan 3 03:07:29 2004 @@ -746,6 +746,29 @@ /* + * Reset the controller. + */ +void i8042_controller_reset(void) +{ + if (i8042_reset) { + unsigned char param; + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) + printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); + } + +/* + * Restore the original control register setting. + */ + + i8042_ctr = i8042_initial_ctr; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_WARNING "i8042.c: Can't restore CTR.\n"); +} + + +/* * Here we try to reset everything back to a state in which the BIOS will be * able to talk to the hardware when rebooting. */ @@ -770,26 +793,20 @@ if (i8042_mux_values[i].exists) serio_cleanup(i8042_mux_port + i); -/* - * Reset the controller. - */ - - if (i8042_reset) { - unsigned char param; + i8042_controller_reset(); +} - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) - printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); - } /* - * Restore the original control register setting. + * Here we try to restore the original BIOS settings */ - i8042_ctr = i8042_initial_ctr; - - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) - printk(KERN_WARNING "i8042.c: Can't restore CTR.\n"); +static int i8042_controller_suspend(void) +{ + del_timer_sync(&i8042_timer); + i8042_controller_reset(); + return 0; } @@ -809,7 +826,7 @@ if (i8042_mux_present) if (i8042_enable_mux_mode(&i8042_aux_values, NULL) || i8042_enable_mux_ports(&i8042_aux_values)) { - printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't wotk.\n"); + printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n"); } /* @@ -825,6 +842,10 @@ for (i = 0; i < 4; i++) if (i8042_mux_values[i].exists && i8042_activate_port(i8042_mux_port + i) == 0) serio_reconnect(i8042_mux_port + i); +/* + * Restart timer (for polling "stuck" data) + */ + mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD); return 0; } @@ -851,16 +872,22 @@ }; /* - * Resume handler for the new PM scheme (driver model) + * Suspend/resume handlers for the new PM scheme (driver model) */ +static int i8042_suspend(struct sys_device *dev, u32 state) +{ + return i8042_controller_suspend(); +} + static int i8042_resume(struct sys_device *dev) { return i8042_controller_resume(); } static struct sysdev_class kbc_sysclass = { - set_kset_name("i8042"), - .resume = i8042_resume, + set_kset_name("i8042"), + .suspend = i8042_suspend, + .resume = i8042_resume, }; static struct sys_device device_i8042 = { @@ -869,12 +896,17 @@ }; /* - * Resume handler for the old PM scheme (APM) + * Suspend/resume handler for the old PM scheme (APM) */ static int i8042_pm_callback(struct pm_dev *dev, pm_request_t request, void *dummy) { - if (request == PM_RESUME) - return i8042_controller_resume(); + switch (request) { + case PM_SUSPEND: + return i8042_controller_suspend(); + + case PM_RESUME: + return i8042_controller_resume(); + } return 0; } @@ -955,7 +987,7 @@ sysdev_class_unregister(&kbc_sysclass); } - del_timer(&i8042_timer); + del_timer_sync(&i8042_timer); i8042_controller_cleanup(); ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: New set of input patches 2004-01-03 8:50 New set of input patches Dmitry Torokhov ` (3 preceding siblings ...) 2004-03-29 15:39 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov @ 2004-03-29 15:39 ` Vojtech Pavlik 2004-03-29 15:44 ` Dmitry Torokhov 5 siblings, 0 replies; 39+ messages in thread From: Vojtech Pavlik @ 2004-03-29 15:39 UTC (permalink / raw) To: Administrator; +Cc: Vojtech Pavlik, Andrew Morton, linux-kernel On Sat, Jan 03, 2004 at 03:50:43AM -0500, Dmitry Torokhov wrote: > Hi Vojtech, > > I have a new set of input patches, could you take look at them? > > 1. i8042-suspend.patch > Add suspend methods to i8042 to restore BIOS settings on suspend and > kill polling timer which sometimes prevents APM suspend > See comments. > 2. i8042-options-parsing.patch > psmouse-options-parsing.patch See comments. > atkbd-options.parsing > Complete conversion to the new way of parsing parameters. Drop "i8042_", > "psmouse_" and "atkbd_" prefixes from option names when compiled as a > module and require "i8042.", "psmouse." and "atkbd." prefixes if built > into the kernel. > > 3. missing-module-license.patch > Maple and newton keyboard drivers were missing MODULE_LICENSE("GPL") > > 4. kconfig-synaptics-help.patch > Suggest psmouse.proto=imps to Synaptics users who do not want install > native XFree Synaptics driver so taps would still work > > 5. sis-aux-port.patch > Do not ignore AUX port if chipset fails to disable it when we do probes > as SiS is having trouble disabling but otherwise mouse works fine. All patches except the first one are OK, in psmouse-options, there is a little typo. -- Vojtech Pavlik SuSE Labs, SuSE CR ^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: New set of input patches 2004-01-03 8:50 New set of input patches Dmitry Torokhov ` (4 preceding siblings ...) 2004-03-29 15:39 ` New set of input patches Vojtech Pavlik @ 2004-03-29 15:44 ` Dmitry Torokhov 5 siblings, 0 replies; 39+ messages in thread From: Dmitry Torokhov @ 2004-03-29 15:44 UTC (permalink / raw) To: Administrator; +Cc: Andrew Morton, linux-kernel I made 3 more input patches: - compile fix in 98busmose driver (it still had its interrupt routine returning voooid instead of irqreturn_t) - the rest of mouse devices converted to the new way of handling kernel parameters and document them in kernel-parametes.txt - convert tsdev module to the new way of handling kernel parameters and document them in kernle-parameters.txt. The patches can be found at the following addresses: http://www.geocities.com/dt_or/input/2_6_1-rc1/ http://www.geocities.com/dt_or/input/2_6_1-rc1-mm1/ Vojtech, Andrew, are you interested in these kind of patches and should I take a stab at converting joysticks diectory as well? Dmitry ^ permalink raw reply [flat|nested] 39+ messages in thread
end of thread, other threads:[~2004-03-29 15:44 UTC | newest] Thread overview: 39+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-01-03 8:50 New set of input patches Dmitry Torokhov 2004-01-03 8:56 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov 2004-01-03 8:57 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov 2004-01-03 9:00 ` [PATCH 3/7] psmouse " Dmitry Torokhov 2004-01-03 9:01 ` [PATCH 4/7] atkbd " Dmitry Torokhov 2004-01-03 9:02 ` [PATCH 5/7] missing module licenses Dmitry Torokhov 2004-01-03 9:03 ` [PATCH 6/7] Kconfig Synaptics help Dmitry Torokhov 2004-01-03 9:03 ` [PATCH 7/7] SiS AUX port Dmitry Torokhov 2004-03-29 15:39 ` Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 6/7] Kconfig Synaptics help Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 5/7] missing module licenses Dmitry Torokhov 2004-01-03 10:07 ` [PATCH 3/7] psmouse option parsing Vojtech Pavlik 2004-01-03 17:29 ` Dmitry Torokhov 2004-01-03 17:38 ` Vojtech Pavlik 2004-03-29 15:40 ` Vojtech Pavlik 2004-03-29 15:40 ` Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 4/7] atkbd " Dmitry Torokhov 2004-03-29 15:39 ` [PATCH 3/7] psmouse " Vojtech Pavlik 2004-03-29 15:39 ` Dmitry Torokhov 2004-01-03 10:03 ` [PATCH 1/7] i8042 suspend Vojtech Pavlik 2004-01-03 16:50 ` Dmitry Torokhov 2004-03-29 15:40 ` Dmitry Torokhov 2004-01-18 19:23 ` Russell King 2004-01-18 22:42 ` Dmitry Torokhov 2004-03-29 15:39 ` Vojtech Pavlik 2004-03-29 15:39 ` [PATCH 2/7] i8042 option parsing Dmitry Torokhov 2004-01-03 10:10 ` New set of input patches Vojtech Pavlik 2004-01-05 5:59 ` Dmitry Torokhov 2004-01-05 6:01 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov 2004-01-05 6:02 ` [PATCH 2/3] Convert mouse drivers to use module_param Dmitry Torokhov 2004-01-05 6:03 ` [PATCH 3/3] Convert tsdev " Dmitry Torokhov 2004-03-29 15:44 ` Dmitry Torokhov 2004-03-29 15:44 ` [PATCH 2/3] Convert mouse drivers " Dmitry Torokhov 2004-01-05 8:36 ` New set of input patches Vojtech Pavlik 2004-03-29 15:44 ` [PATCH 1/3] Fix compile error in 98busmouse.c module Dmitry Torokhov 2004-03-29 15:44 ` New set of input patches Vojtech Pavlik 2004-03-29 15:39 ` [PATCH 1/7] i8042 suspend Dmitry Torokhov 2004-03-29 15:39 ` New set of input patches Vojtech Pavlik 2004-03-29 15:44 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).