* Re: Fw: Re: parallel make problems (-mm) -now found in 2.6.5-rc1 also
[not found] <20040312120024.2cef94c8.rddunlap@osdl.org>
@ 2004-03-22 21:16 ` cliff white
2004-03-23 5:41 ` Sam Ravnborg
0 siblings, 1 reply; 3+ messages in thread
From: cliff white @ 2004-03-22 21:16 UTC (permalink / raw)
To: sam, rddunlap, linux-kernel; +Cc: maryedie, cherry
Hi Sam,
randy dunlap is on vacation this week,
(and i was last week ) so i am trying to get a resolution to
the parallel make problem.
Tested your patch below and it didn't help us. The patch doesn't
apply clean past 2.6.4-mm1.
We now see this exact failure against 2.6.5-rc1 for our 8-way machines,
so we have much concern.
Is there another fix around we could try?
cliffw
OSDL
FYI - repeat of sample error:
------------
STP: found 8 processor(s)
STP: stp_robokern changing into Linux directory
STP: stp_robokern correcting possible permission issues
STP: stp_robokern running 'make mrproper'
STP: stp_robokern calling stp_sanitize-config
STP: stp_robokern 'make clean'
STP: stp_robokern 'make -s -j8'
CHK include/linux/version.h
UPD include/linux/version.h
SYMLINK include/asm -> include/asm-i386
/bin/sh: line 1: scripts/fixdep: Permission denied
make[1]: *** [scripts/empty.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [scripts] Error 2
make: *** Waiting for unfinished jobs....
optimize && ?
optimize && ?
optimize && ?
optimize && ?
--------------------------
On Fri, 12 Mar 2004 12:00:24 -0800
"Randy.Dunlap" <rddunlap@osdl.org> wrote:
>
> Here's a fix from Sam Ravnborg. It applies to latest -mm.
> Can you test it, please?
>
> ~Randy
>
>
>
> Begin forwarded message:
>
> Date: Fri, 12 Mar 2004 21:02:05 +0100
> From: Sam Ravnborg <sam@ravnborg.org>
> To: "Randy.Dunlap" <rddunlap@osdl.org>
> Cc: sam@ravnborg.org
> Subject: Re: parallel make problems (-mm)
>
>
> On Fri, Mar 12, 2004 at 11:35:17AM -0800, Randy.Dunlap wrote:
> >
> > Hi Sam,
> >
> > We are seeing some possible parallel build problems.
> > This is most frequently on an 8-proc system, using make -j8.
> > It also occurs less often on a 4-proc system, using make -j4.
>
> Ingo complained about the error 'text file is busy' when doing make -j10,
> and I could reproduce it on my UP machine.
> The problem was even visible with make -j2, where I could see fixdep
> being build twice.
> The cure was not as simple as I originally expected. I had to introduce
> an additional step to build the very basic files in scripts, so
> I moved those to a separate directory scripts/basic/
>
> The patch is attached. Any feedback appreciated.
> It's on top of latest -mm
>
> Most of the patch is due to moving the three files.
>
> Sam
>
> # This is a BitKeeper generated patch for the following project:
> # Project Name: Linux kernel tree
> # This patch format is intended for GNU patch command version 2.5 or higher.
> # This patch includes the following deltas:
> # ChangeSet 1.1868 -> 1.1869
> # scripts/docproc.c 1.4 -> 1.5 scripts/basic/docproc.c (moved)
> # scripts/split-include.c 1.3 -> 1.4 scripts/basic/split-include.c (moved)
> # scripts/fixdep.c 1.13 -> 1.14 scripts/basic/fixdep.c (moved)
> # scripts/Makefile.lib 1.23 -> 1.24
> # scripts/Makefile 1.36 -> 1.37
> # Makefile 1.466 -> 1.467
> # scripts/Makefile.build 1.42 -> 1.43
> # (new) -> 1.1 scripts/basic/Makefile
> #
> # The following is the BitKeeper ChangeSet Log
> # --------------------------------------------
> # 04/03/11 sam@mars.ravnborg.org 1.1869
> # Fix dependencies in early phases
> # --------------------------------------------
> #
> diff -Nru a/Makefile b/Makefile
> --- a/Makefile Thu Mar 11 22:37:19 2004
> +++ b/Makefile Thu Mar 11 22:37:19 2004
> @@ -304,17 +304,10 @@
> # ===========================================================================
> # Rules shared between *config targets and build targets
>
> -# Helpers built in scripts/
> -
> -scripts/docproc scripts/split-include : scripts ;
> -
> -.PHONY: scripts scripts/fixdep
> -scripts:
> - $(Q)$(MAKE) $(build)=scripts
> -
> -scripts/fixdep:
> - $(Q)$(MAKE) $(build)=scripts $@
> -
> +# Basic helpers built in scripts/
> +.PHONY: scripts_basic
> +scripts_basic:
> + $(Q)$(MAKE) $(build)=scripts/basic
>
> # To make sure we do not include .config for any of the *config targets
> # catch them early, and hand them over to scripts/kconfig/Makefile
> @@ -358,9 +351,9 @@
> # *config targets only - make sure prerequisites are updated, and descend
> # in scripts/kconfig to make the *config target
>
> -%config: scripts/fixdep FORCE
> +config: scripts_basic FORCE
> $(Q)$(MAKE) $(build)=scripts/kconfig $@
> -config : scripts/fixdep FORCE
> +%config: scripts_basic FORCE
> $(Q)$(MAKE) $(build)=scripts/kconfig $@
>
> else
> @@ -368,6 +361,16 @@
> # Build targets only - this includes vmlinux, arch specific targets, clean
> # targets and others. In general all targets except *config targets.
>
> +# Additional helpers built in scripts/
> +# Carefully list dependencies so we do not try to build scripts twice
> +# in parrallel
> +.PHONY: scripts
> +scripts: scripts_basic include/config/MARKER
> + $(Q)$(MAKE) $(build)=$(@)
> +
> +scripts_basic: include/linux/autoconf.h
> +
> +
> # That's our default target when none is given on the command line
> # Note that 'modules' will be added as a prerequisite as well,
> # in the CONFIG_MODULES part below
> @@ -400,7 +403,9 @@
> # with it and forgot to run make oldconfig
> include/linux/autoconf.h: .config
> $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
> -
> +else
> +# Dummy target needed, because used as prerequisite
> +include/linux/autoconf.h: ;
> endif
>
> include $(srctree)/arch/$(ARCH)/Makefile
> @@ -634,7 +639,7 @@
>
> # Split autoconf.h into include/linux/config/*
>
> -include/config/MARKER: scripts/split-include include/linux/autoconf.h
> +include/config/MARKER: include/linux/autoconf.h
> @echo ' SPLIT include/linux/autoconf.h -> include/config/*'
> @scripts/split-include include/linux/autoconf.h include/config
> @touch $@
> @@ -930,7 +935,7 @@
>
> # Documentation targets
> # ---------------------------------------------------------------------------
> -%docs: scripts/docproc FORCE
> +%docs: scripts FORCE
> $(Q)$(MAKE) $(build)=Documentation/DocBook $@
>
> # Scripts to check various things for consistency
> diff -Nru a/scripts/Makefile b/scripts/Makefile
> --- a/scripts/Makefile Thu Mar 11 22:37:19 2004
> +++ b/scripts/Makefile Thu Mar 11 22:37:19 2004
> @@ -2,14 +2,10 @@
> # scripts contains sources for various helper programs used throughout
> # the kernel for the build process.
> # ---------------------------------------------------------------------------
> -# fix-dep: Used to generate dependency information during build process
> -# split-include: Divide all config symbols up in a number of files in
> -# include/config/...
> # docproc: Preprocess .tmpl file in order to generate .sgml docs
> # conmakehash: Create arrays for initializing the kernel console tables
>
> -host-progs := fixdep split-include conmakehash docproc kallsyms modpost \
> - mk_elfconfig pnmtologo bin2c
> +host-progs := conmakehash kallsyms modpost mk_elfconfig pnmtologo bin2c
> always := $(host-progs) empty.o
>
> modpost-objs := modpost.o file2alias.o sumversion.o
> @@ -17,10 +13,7 @@
> subdir-$(CONFIG_MODVERSIONS) += genksyms
>
> # Let clean descend into subdirs
> -subdir- += lxdialog kconfig
> -
> -# fixdep is needed to compile other host programs
> -$(addprefix $(obj)/,$(filter-out fixdep,$(always)) $(subdir-y)): $(obj)/fixdep
> +subdir- += basic lxdialog kconfig
>
> # dependencies on generated files need to be listed explicitly
>
> diff -Nru a/scripts/Makefile.build b/scripts/Makefile.build
> --- a/scripts/Makefile.build Thu Mar 11 22:37:19 2004
> +++ b/scripts/Makefile.build Thu Mar 11 22:37:19 2004
> @@ -162,7 +162,7 @@
> $(if $($(quiet)cmd_cc_o_c),echo ' $($(quiet)cmd_cc_o_c)';) \
> $(cmd_cc_o_c); \
> $(cmd_modversions) \
> - scripts/fixdep $(depfile) $@ '$(cmd_cc_o_c)' > $(@D)/.$(@F).tmp; \
> + scripts/basic/fixdep $(depfile) $@ '$(cmd_cc_o_c)' > $(@D)/.$(@F).tmp; \
> rm -f $(depfile); \
> mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd
> endef
> diff -Nru a/scripts/Makefile.lib b/scripts/Makefile.lib
> --- a/scripts/Makefile.lib Thu Mar 11 22:37:19 2004
> +++ b/scripts/Makefile.lib Thu Mar 11 22:37:19 2004
> @@ -249,7 +249,7 @@
> @set -e; \
> $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
> $(cmd_$(1)); \
> - scripts/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
> + scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
> rm -f $(depfile); \
> mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
>
> diff -Nru a/scripts/basic/Makefile b/scripts/basic/Makefile
> --- /dev/null Wed Dec 31 16:00:00 1969
> +++ b/scripts/basic/Makefile Thu Mar 11 22:37:19 2004
> @@ -0,0 +1,18 @@
> +###
> +# Makefile.basic list the most basic programs used during the build process.
> +# The programs listed herein is what is needed to do the basic stuff,
> +# such as splitting .config and fix dependency file.
> +# This initial step is needed to avoid files to be recompiled
> +# when kernel configuration changes (which is what happens when
> +# .config is included by main Makefile.
> +# ---------------------------------------------------------------------------
> +# fixdep: Used to generate dependency information during build process
> +# split-include: Divide all config symbols up in a number of files in
> +# include/config/...
> +# docproc: Used in Documentation/docbook
> +
> +host-progs := fixdep split-include docproc
> +always := $(host-progs)
> +
> +# fixdep is needed to compile other host programs
> +$(addprefix $(obj)/,$(filter-out fixdep,$(always))): $(obj)/fixdep
> diff -Nru a/scripts/basic/docproc.c b/scripts/basic/docproc.c
> --- /dev/null Wed Dec 31 16:00:00 1969
> +++ b/scripts/basic/docproc.c Thu Mar 11 22:37:19 2004
> @@ -0,0 +1,387 @@
> +/*
> + * docproc is a simple preprocessor for the template files
> + * used as placeholders for the kernel internal documentation.
> + * docproc is used for documentation-frontend and
> + * dependency-generator.
> + * The two usages have in common that they require
> + * some knowledge of the .tmpl syntax, therefore they
> + * are kept together.
> + *
> + * documentation-frontend
> + * Scans the template file and call kernel-doc for
> + * all occurrences of ![EIF]file
> + * Beforehand each referenced file are scanned for
> + * any exported sympols "EXPORT_SYMBOL()" statements.
> + * This is used to create proper -function and
> + * -nofunction arguments in calls to kernel-doc.
> + * Usage: docproc doc file.tmpl
> + *
> + * dependency-generator:
> + * Scans the template file and list all files
> + * referenced in a format recognized by make.
> + * Usage: docproc depend file.tmpl
> + * Writes dependency information to stdout
> + * in the following format:
> + * file.tmpl src.c src2.c
> + * The filenames are obtained from the following constructs:
> + * !Efilename
> + * !Ifilename
> + * !Dfilename
> + * !Ffilename
> + *
> + */
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <ctype.h>
> +#include <unistd.h>
> +#include <limits.h>
> +#include <sys/types.h>
> +#include <sys/wait.h>
> +
> +/* exitstatus is used to keep track of any failing calls to kernel-doc,
> + * but execution continues. */
> +int exitstatus = 0;
> +
> +typedef void DFL(char *);
> +DFL *defaultline;
> +
> +typedef void FILEONLY(char * file);
> +FILEONLY *internalfunctions;
> +FILEONLY *externalfunctions;
> +FILEONLY *symbolsonly;
> +
> +typedef void FILELINE(char * file, char * line);
> +FILELINE * singlefunctions;
> +FILELINE * entity_system;
> +
> +#define MAXLINESZ 2048
> +#define MAXFILES 250
> +#define KERNELDOCPATH "scripts/"
> +#define KERNELDOC "kernel-doc"
> +#define DOCBOOK "-docbook"
> +#define FUNCTION "-function"
> +#define NOFUNCTION "-nofunction"
> +
> +void usage (void)
> +{
> + fprintf(stderr, "Usage: docproc {doc|depend} file\n");
> + fprintf(stderr, "Input is read from file.tmpl. Output is sent to stdout\n");
> + fprintf(stderr, "doc: frontend when generating kernel documentation\n");
> + fprintf(stderr, "depend: generate list of files referenced within file\n");
> +}
> +
> +/*
> + * Execute kernel-doc with parameters givin in svec
> + */
> +void exec_kernel_doc(char **svec)
> +{
> + pid_t pid;
> + int ret;
> + /* Make sure output generated so far are flushed */
> + fflush(stdout);
> + switch(pid=fork()) {
> + case -1:
> + perror("fork");
> + exit(1);
> + case 0:
> + execvp(KERNELDOCPATH KERNELDOC, svec);
> + perror("exec " KERNELDOCPATH KERNELDOC);
> + exit(1);
> + default:
> + waitpid(pid, &ret ,0);
> + }
> + if (WIFEXITED(ret))
> + exitstatus |= WEXITSTATUS(ret);
> + else
> + exitstatus = 0xff;
> +}
> +
> +/* Types used to create list of all exported symbols in a number of files */
> +struct symbols
> +{
> + char *name;
> +};
> +
> +struct symfile
> +{
> + char *filename;
> + struct symbols *symbollist;
> + int symbolcnt;
> +};
> +
> +struct symfile symfilelist[MAXFILES];
> +int symfilecnt = 0;
> +
> +void add_new_symbol(struct symfile *sym, char * symname)
> +{
> + sym->symbollist =
> + realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *));
> + sym->symbollist[sym->symbolcnt++].name = strdup(symname);
> +}
> +
> +/* Add a filename to the list */
> +struct symfile * add_new_file(char * filename)
> +{
> + symfilelist[symfilecnt++].filename = strdup(filename);
> + return &symfilelist[symfilecnt - 1];
> +}
> +/* Check if file already are present in the list */
> +struct symfile * filename_exist(char * filename)
> +{
> + int i;
> + for (i=0; i < symfilecnt; i++)
> + if (strcmp(symfilelist[i].filename, filename) == 0)
> + return &symfilelist[i];
> + return NULL;
> +}
> +
> +/*
> + * List all files referenced within the template file.
> + * Files are separated by tabs.
> + */
> +void adddep(char * file) { printf("\t%s", file); }
> +void adddep2(char * file, char * line) { line = line; adddep(file); }
> +void noaction(char * line) { line = line; }
> +void noaction2(char * file, char * line) { file = file; line = line; }
> +
> +/* Echo the line without further action */
> +void printline(char * line) { printf("%s", line); }
> +
> +/*
> + * Find all symbols exported with EXPORT_SYMBOL and EXPORT_SYMBOL_GPL
> + * in filename.
> + * All symbols located are stored in symfilelist.
> + */
> +void find_export_symbols(char * filename)
> +{
> + FILE * fp;
> + struct symfile *sym;
> + char line[MAXLINESZ];
> + if (filename_exist(filename) == NULL) {
> + sym = add_new_file(filename);
> + fp = fopen(filename, "r");
> + if (fp == NULL)
> + {
> + fprintf(stderr, "docproc: ");
> + perror(filename);
> + }
> + while(fgets(line, MAXLINESZ, fp)) {
> + char *p;
> + char *e;
> + if (((p = strstr(line, "EXPORT_SYMBOL_GPL")) != 0) ||
> + ((p = strstr(line, "EXPORT_SYMBOL")) != 0)) {
> + /* Skip EXPORT_SYMBOL{_GPL} */
> + while (isalnum(*p) || *p == '_')
> + p++;
> + /* Remove paranteses and additional ws */
> + while (isspace(*p))
> + p++;
> + if (*p != '(')
> + continue; /* Syntax error? */
> + else
> + p++;
> + while (isspace(*p))
> + p++;
> + e = p;
> + while (isalnum(*e) || *e == '_')
> + e++;
> + *e = '\0';
> + add_new_symbol(sym, p);
> + }
> + }
> + fclose(fp);
> + }
> +}
> +
> +/*
> + * Document all external or internal functions in a file.
> + * Call kernel-doc with following parameters:
> + * kernel-doc -docbook -nofunction function_name1 filename
> + * function names are obtained from all the the src files
> + * by find_export_symbols.
> + * intfunc uses -nofunction
> + * extfunc uses -function
> + */
> +void docfunctions(char * filename, char * type)
> +{
> + int i,j;
> + int symcnt = 0;
> + int idx = 0;
> + char **vec;
> +
> + for (i=0; i <= symfilecnt; i++)
> + symcnt += symfilelist[i].symbolcnt;
> + vec = malloc((2 + 2 * symcnt + 2) * sizeof(char*));
> + if (vec == NULL) {
> + perror("docproc: ");
> + exit(1);
> + }
> + vec[idx++] = KERNELDOC;
> + vec[idx++] = DOCBOOK;
> + for (i=0; i < symfilecnt; i++) {
> + struct symfile * sym = &symfilelist[i];
> + for (j=0; j < sym->symbolcnt; j++) {
> + vec[idx++] = type;
> + vec[idx++] = sym->symbollist[j].name;
> + }
> + }
> + vec[idx++] = filename;
> + vec[idx] = NULL;
> + printf("<!-- %s -->\n", filename);
> + exec_kernel_doc(vec);
> + fflush(stdout);
> + free(vec);
> +}
> +void intfunc(char * filename) { docfunctions(filename, NOFUNCTION); }
> +void extfunc(char * filename) { docfunctions(filename, FUNCTION); }
> +
> +/*
> + * Document spåecific function(s) in a file.
> + * Call kernel-doc with the following parameters:
> + * kernel-doc -docbook -function function1 [-function function2]
> + */
> +void singfunc(char * filename, char * line)
> +{
> + char *vec[200]; /* Enough for specific functions */
> + int i, idx = 0;
> + int startofsym = 1;
> + vec[idx++] = KERNELDOC;
> + vec[idx++] = DOCBOOK;
> +
> + /* Split line up in individual parameters preceeded by FUNCTION */
> + for (i=0; line[i]; i++) {
> + if (isspace(line[i])) {
> + line[i] = '\0';
> + startofsym = 1;
> + continue;
> + }
> + if (startofsym) {
> + startofsym = 0;
> + vec[idx++] = FUNCTION;
> + vec[idx++] = &line[i];
> + }
> + }
> + vec[idx++] = filename;
> + vec[idx] = NULL;
> + exec_kernel_doc(vec);
> +}
> +
> +/*
> + * Parse file, calling action specific functions for:
> + * 1) Lines containing !E
> + * 2) Lines containing !I
> + * 3) Lines containing !D
> + * 4) Lines containing !F
> + * 5) Default lines - lines not matching the above
> + */
> +void parse_file(FILE *infile)
> +{
> + char line[MAXLINESZ];
> + char * s;
> + while(fgets(line, MAXLINESZ, infile)) {
> + if (line[0] == '!') {
> + s = line + 2;
> + switch (line[1]) {
> + case 'E':
> + while (*s && !isspace(*s)) s++;
> + *s = '\0';
> + externalfunctions(line+2);
> + break;
> + case 'I':
> + while (*s && !isspace(*s)) s++;
> + *s = '\0';
> + internalfunctions(line+2);
> + break;
> + case 'D':
> + while (*s && !isspace(*s)) s++;
> + *s = '\0';
> + symbolsonly(line+2);
> + break;
> + case 'F':
> + /* filename */
> + while (*s && !isspace(*s)) s++;
> + *s++ = '\0';
> + /* function names */
> + while (isspace(*s))
> + s++;
> + singlefunctions(line +2, s);
> + break;
> + default:
> + defaultline(line);
> + }
> + }
> + else {
> + defaultline(line);
> + }
> + }
> + fflush(stdout);
> +}
> +
> +
> +int main(int argc, char *argv[])
> +{
> + FILE * infile;
> + if (argc != 3) {
> + usage();
> + exit(1);
> + }
> + /* Open file, exit on error */
> + infile = fopen(argv[2], "r");
> + if (infile == NULL) {
> + fprintf(stderr, "docproc: ");
> + perror(argv[2]);
> + exit(2);
> + }
> +
> + if (strcmp("doc", argv[1]) == 0)
> + {
> + /* Need to do this in two passes.
> + * First pass is used to collect all symbols exported
> + * in the various files.
> + * Second pass generate the documentation.
> + * This is required because function are declared
> + * and exported in different files :-((
> + */
> + /* Collect symbols */
> + defaultline = noaction;
> + internalfunctions = find_export_symbols;
> + externalfunctions = find_export_symbols;
> + symbolsonly = find_export_symbols;
> + singlefunctions = noaction2;
> + parse_file(infile);
> +
> + /* Rewind to start from beginning of file again */
> + fseek(infile, 0, SEEK_SET);
> + defaultline = printline;
> + internalfunctions = intfunc;
> + externalfunctions = extfunc;
> + symbolsonly = printline;
> + singlefunctions = singfunc;
> +
> + parse_file(infile);
> + }
> + else if (strcmp("depend", argv[1]) == 0)
> + {
> + /* Create first part of dependency chain
> + * file.tmpl */
> + printf("%s\t", argv[2]);
> + defaultline = noaction;
> + internalfunctions = adddep;
> + externalfunctions = adddep;
> + symbolsonly = adddep;
> + singlefunctions = adddep2;
> + parse_file(infile);
> + printf("\n");
> + }
> + else
> + {
> + fprintf(stderr, "Unknown option: %s\n", argv[1]);
> + exit(1);
> + }
> + fclose(infile);
> + fflush(stdout);
> + return exitstatus;
> +}
> +
> diff -Nru a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
> --- /dev/null Wed Dec 31 16:00:00 1969
> +++ b/scripts/basic/fixdep.c Thu Mar 11 22:37:19 2004
> @@ -0,0 +1,381 @@
> +/*
> + * "Optimize" a list of dependencies as spit out by gcc -MD
> + * for the kernel build
> + * ===========================================================================
> + *
> + * Author Kai Germaschewski
> + * Copyright 2002 by Kai Germaschewski <kai.germaschewski@gmx.de>
> + *
> + * This software may be used and distributed according to the terms
> + * of the GNU General Public License, incorporated herein by reference.
> + *
> + *
> + * Introduction:
> + *
> + * gcc produces a very nice and correct list of dependencies which
> + * tells make when to remake a file.
> + *
> + * To use this list as-is however has the drawback that virtually
> + * every file in the kernel includes <linux/config.h> which then again
> + * includes <linux/autoconf.h>
> + *
> + * If the user re-runs make *config, linux/autoconf.h will be
> + * regenerated. make notices that and will rebuild every file which
> + * includes autoconf.h, i.e. basically all files. This is extremely
> + * annoying if the user just changed CONFIG_HIS_DRIVER from n to m.
> + *
> + * So we play the same trick that "mkdep" played before. We replace
> + * the dependency on linux/autoconf.h by a dependency on every config
> + * option which is mentioned in any of the listed prequisites.
> + *
> + * To be exact, split-include populates a tree in include/config/,
> + * e.g. include/config/his/driver.h, which contains the #define/#undef
> + * for the CONFIG_HIS_DRIVER option.
> + *
> + * So if the user changes his CONFIG_HIS_DRIVER option, only the objects
> + * which depend on "include/linux/config/his/driver.h" will be rebuilt,
> + * so most likely only his driver ;-)
> + *
> + * The idea above dates, by the way, back to Michael E Chastain, AFAIK.
> + *
> + * So to get dependencies right, there two issues:
> + * o if any of the files the compiler read changed, we need to rebuild
> + * o if the command line given to the compile the file changed, we
> + * better rebuild as well.
> + *
> + * The former is handled by using the -MD output, the later by saving
> + * the command line used to compile the old object and comparing it
> + * to the one we would now use.
> + *
> + * Again, also this idea is pretty old and has been discussed on
> + * kbuild-devel a long time ago. I don't have a sensibly working
> + * internet connection right now, so I rather don't mention names
> + * without double checking.
> + *
> + * This code here has been based partially based on mkdep.c, which
> + * says the following about its history:
> + *
> + * Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
> + * This is a C version of syncdep.pl by Werner Almesberger.
> + *
> + *
> + * It is invoked as
> + *
> + * fixdep <depfile> <target> <cmdline>
> + *
> + * and will read the dependency file <depfile>
> + *
> + * The transformed dependency snipped is written to stdout.
> + *
> + * It first generates a line
> + *
> + * cmd_<target> = <cmdline>
> + *
> + * and then basically copies the .<target>.d file to stdout, in the
> + * process filtering out the dependency on linux/autoconf.h and adding
> + * dependencies on include/config/my/option.h for every
> + * CONFIG_MY_OPTION encountered in any of the prequisites.
> + *
> + * It will also filter out all the dependencies on *.ver. We need
> + * to make sure that the generated version checksum are globally up
> + * to date before even starting the recursive build, so it's too late
> + * at this point anyway.
> + *
> + * The algorithm to grep for "CONFIG_..." is bit unusual, but should
> + * be fast ;-) We don't even try to really parse the header files, but
> + * merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will
> + * be picked up as well. It's not a problem with respect to
> + * correctness, since that can only give too many dependencies, thus
> + * we cannot miss a rebuild. Since people tend to not mention totally
> + * unrelated CONFIG_ options all over the place, it's not an
> + * efficiency problem either.
> + *
> + * (Note: it'd be easy to port over the complete mkdep state machine,
> + * but I don't think the added complexity is worth it)
> + */
> +
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <sys/mman.h>
> +#include <unistd.h>
> +#include <fcntl.h>
> +#include <string.h>
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <limits.h>
> +#include <ctype.h>
> +#include <netinet/in.h>
> +
> +#define INT_CONF ntohl(0x434f4e46)
> +#define INT_ONFI ntohl(0x4f4e4649)
> +#define INT_NFIG ntohl(0x4e464947)
> +#define INT_FIG_ ntohl(0x4649475f)
> +
> +char *target;
> +char *depfile;
> +char *cmdline;
> +
> +void usage(void)
> +
> +{
> + fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
> + exit(1);
> +}
> +
> +void print_cmdline(void)
> +{
> + printf("cmd_%s := %s\n\n", target, cmdline);
> +}
> +
> +char * str_config = NULL;
> +int size_config = 0;
> +int len_config = 0;
> +
> +/*
> + * Grow the configuration string to a desired length.
> + * Usually the first growth is plenty.
> + */
> +void grow_config(int len)
> +{
> + while (len_config + len > size_config) {
> + if (size_config == 0)
> + size_config = 2048;
> + str_config = realloc(str_config, size_config *= 2);
> + if (str_config == NULL)
> + { perror("fixdep:malloc"); exit(1); }
> + }
> +}
> +
> +
> +
> +/*
> + * Lookup a value in the configuration string.
> + */
> +int is_defined_config(const char * name, int len)
> +{
> + const char * pconfig;
> + const char * plast = str_config + len_config - len;
> + for ( pconfig = str_config + 1; pconfig < plast; pconfig++ ) {
> + if (pconfig[ -1] == '\n'
> + && pconfig[len] == '\n'
> + && !memcmp(pconfig, name, len))
> + return 1;
> + }
> + return 0;
> +}
> +
> +/*
> + * Add a new value to the configuration string.
> + */
> +void define_config(const char * name, int len)
> +{
> + grow_config(len + 1);
> +
> + memcpy(str_config+len_config, name, len);
> + len_config += len;
> + str_config[len_config++] = '\n';
> +}
> +
> +/*
> + * Clear the set of configuration strings.
> + */
> +void clear_config(void)
> +{
> + len_config = 0;
> + define_config("", 0);
> +}
> +
> +/*
> + * Record the use of a CONFIG_* word.
> + */
> +void use_config(char *m, int slen)
> +{
> + char s[PATH_MAX];
> + char *p;
> +
> + if (is_defined_config(m, slen))
> + return;
> +
> + define_config(m, slen);
> +
> + memcpy(s, m, slen); s[slen] = 0;
> +
> + for (p = s; p < s + slen; p++) {
> + if (*p == '_')
> + *p = '/';
> + else
> + *p = tolower((unsigned char)*p);
> + }
> + printf(" $(wildcard include/config/%s.h) \\\n", s);
> +}
> +
> +void parse_config_file(char *map, size_t len)
> +{
> + int *end = (int *) (map + len);
> + /* start at +1, so that p can never be < map */
> + int *m = (int *) map + 1;
> + char *p, *q;
> +
> + for (; m < end; m++) {
> + if (*m == INT_CONF) { p = (char *) m ; goto conf; }
> + if (*m == INT_ONFI) { p = (char *) m-1; goto conf; }
> + if (*m == INT_NFIG) { p = (char *) m-2; goto conf; }
> + if (*m == INT_FIG_) { p = (char *) m-3; goto conf; }
> + continue;
> + conf:
> + if (p > map + len - 7)
> + continue;
> + if (memcmp(p, "CONFIG_", 7))
> + continue;
> + for (q = p + 7; q < map + len; q++) {
> + if (!(isalnum(*q) || *q == '_'))
> + goto found;
> + }
> + continue;
> +
> + found:
> + use_config(p+7, q-p-7);
> + }
> +}
> +
> +/* test is s ends in sub */
> +int strrcmp(char *s, char *sub)
> +{
> + int slen = strlen(s);
> + int sublen = strlen(sub);
> +
> + if (sublen > slen)
> + return 1;
> +
> + return memcmp(s + slen - sublen, sub, sublen);
> +}
> +
> +void do_config_file(char *filename)
> +{
> + struct stat st;
> + int fd;
> + void *map;
> +
> + fd = open(filename, O_RDONLY);
> + if (fd < 0) {
> + fprintf(stderr, "fixdep: ");
> + perror(filename);
> + exit(2);
> + }
> + fstat(fd, &st);
> + if (st.st_size == 0) {
> + close(fd);
> + return;
> + }
> + map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
> + if ((long) map == -1) {
> + perror("fixdep: mmap");
> + close(fd);
> + return;
> + }
> +
> + parse_config_file(map, st.st_size);
> +
> + munmap(map, st.st_size);
> +
> + close(fd);
> +}
> +
> +void parse_dep_file(void *map, size_t len)
> +{
> + char *m = map;
> + char *end = m + len;
> + char *p;
> + char s[PATH_MAX];
> +
> + p = strchr(m, ':');
> + if (!p) {
> + fprintf(stderr, "fixdep: parse error\n");
> + exit(1);
> + }
> + memcpy(s, m, p-m); s[p-m] = 0;
> + printf("deps_%s := \\\n", target);
> + m = p+1;
> +
> + clear_config();
> +
> + while (m < end) {
> + while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
> + m++;
> + p = m;
> + while (p < end && *p != ' ') p++;
> + if (p == end) {
> + do p--; while (!isalnum(*p));
> + p++;
> + }
> + memcpy(s, m, p-m); s[p-m] = 0;
> + if (strrcmp(s, "include/linux/autoconf.h") &&
> + strrcmp(s, ".ver")) {
> + printf(" %s \\\n", s);
> + do_config_file(s);
> + }
> + m = p + 1;
> + }
> + printf("\n%s: $(deps_%s)\n\n", target, target);
> + printf("$(deps_%s):\n", target);
> +}
> +
> +void print_deps(void)
> +{
> + struct stat st;
> + int fd;
> + void *map;
> +
> + fd = open(depfile, O_RDONLY);
> + if (fd < 0) {
> + fprintf(stderr, "fixdep: ");
> + perror(depfile);
> + exit(2);
> + }
> + fstat(fd, &st);
> + if (st.st_size == 0) {
> + fprintf(stderr,"fixdep: %s is empty\n",depfile);
> + close(fd);
> + return;
> + }
> + map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
> + if ((long) map == -1) {
> + perror("fixdep: mmap");
> + close(fd);
> + return;
> + }
> +
> + parse_dep_file(map, st.st_size);
> +
> + munmap(map, st.st_size);
> +
> + close(fd);
> +}
> +
> +void traps(void)
> +{
> + static char test[] __attribute__((aligned(sizeof(int)))) = "CONF";
> +
> + if (*(int *)test != INT_CONF) {
> + fprintf(stderr, "fixdep: sizeof(int) != 4 or wrong endianess? %#x\n",
> + *(int *)test);
> + exit(2);
> + }
> +}
> +
> +int main(int argc, char *argv[])
> +{
> + traps();
> +
> + if (argc != 4)
> + usage();
> +
> + depfile = argv[1];
> + target = argv[2];
> + cmdline = argv[3];
> +
> + print_cmdline();
> + print_deps();
> +
> + return 0;
> +}
> diff -Nru a/scripts/basic/split-include.c b/scripts/basic/split-include.c
> --- /dev/null Wed Dec 31 16:00:00 1969
> +++ b/scripts/basic/split-include.c Thu Mar 11 22:37:19 2004
> @@ -0,0 +1,226 @@
> +/*
> + * split-include.c
> + *
> + * Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
> + * This is a C version of syncdep.pl by Werner Almesberger.
> + *
> + * This program takes autoconf.h as input and outputs a directory full
> + * of one-line include files, merging onto the old values.
> + *
> + * Think of the configuration options as key-value pairs. Then there
> + * are five cases:
> + *
> + * key old value new value action
> + *
> + * KEY-1 VALUE-1 VALUE-1 leave file alone
> + * KEY-2 VALUE-2A VALUE-2B write VALUE-2B into file
> + * KEY-3 - VALUE-3 write VALUE-3 into file
> + * KEY-4 VALUE-4 - write an empty file
> + * KEY-5 (empty) - leave old empty file alone
> + */
> +
> +#include <sys/stat.h>
> +#include <sys/types.h>
> +
> +#include <ctype.h>
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <unistd.h>
> +
> +#define ERROR_EXIT(strExit) \
> + { \
> + const int errnoSave = errno; \
> + fprintf(stderr, "%s: ", str_my_name); \
> + errno = errnoSave; \
> + perror((strExit)); \
> + exit(1); \
> + }
> +
> +
> +
> +int main(int argc, const char * argv [])
> +{
> + const char * str_my_name;
> + const char * str_file_autoconf;
> + const char * str_dir_config;
> +
> + FILE * fp_config;
> + FILE * fp_target;
> + FILE * fp_find;
> +
> + int buffer_size;
> +
> + char * line;
> + char * old_line;
> + char * list_target;
> + char * ptarget;
> +
> + struct stat stat_buf;
> +
> + /* Check arg count. */
> + if (argc != 3)
> + {
> + fprintf(stderr, "%s: wrong number of arguments.\n", argv[0]);
> + exit(1);
> + }
> +
> + str_my_name = argv[0];
> + str_file_autoconf = argv[1];
> + str_dir_config = argv[2];
> +
> + /* Find a buffer size. */
> + if (stat(str_file_autoconf, &stat_buf) != 0)
> + ERROR_EXIT(str_file_autoconf);
> + buffer_size = 2 * stat_buf.st_size + 4096;
> +
> + /* Allocate buffers. */
> + if ( (line = malloc(buffer_size)) == NULL
> + || (old_line = malloc(buffer_size)) == NULL
> + || (list_target = malloc(buffer_size)) == NULL )
> + ERROR_EXIT(str_file_autoconf);
> +
> + /* Open autoconfig file. */
> + if ((fp_config = fopen(str_file_autoconf, "r")) == NULL)
> + ERROR_EXIT(str_file_autoconf);
> +
> + /* Make output directory if needed. */
> + if (stat(str_dir_config, &stat_buf) != 0)
> + {
> + if (mkdir(str_dir_config, 0755) != 0)
> + ERROR_EXIT(str_dir_config);
> + }
> +
> + /* Change to output directory. */
> + if (chdir(str_dir_config) != 0)
> + ERROR_EXIT(str_dir_config);
> +
> + /* Put initial separator into target list. */
> + ptarget = list_target;
> + *ptarget++ = '\n';
> +
> + /* Read config lines. */
> + while (fgets(line, buffer_size, fp_config))
> + {
> + const char * str_config;
> + int is_same;
> + int itarget;
> +
> + if (line[0] != '#')
> + continue;
> + if ((str_config = strstr(line, "CONFIG_")) == NULL)
> + continue;
> +
> + /* Make the output file name. */
> + str_config += sizeof("CONFIG_") - 1;
> + for (itarget = 0; !isspace(str_config[itarget]); itarget++)
> + {
> + int c = (unsigned char) str_config[itarget];
> + if (isupper(c)) c = tolower(c);
> + if (c == '_') c = '/';
> + ptarget[itarget] = c;
> + }
> + ptarget[itarget++] = '.';
> + ptarget[itarget++] = 'h';
> + ptarget[itarget++] = '\0';
> +
> + /* Check for existing file. */
> + is_same = 0;
> + if ((fp_target = fopen(ptarget, "r")) != NULL)
> + {
> + fgets(old_line, buffer_size, fp_target);
> + if (fclose(fp_target) != 0)
> + ERROR_EXIT(ptarget);
> + if (!strcmp(line, old_line))
> + is_same = 1;
> + }
> +
> + if (!is_same)
> + {
> + /* Auto-create directories. */
> + int islash;
> + for (islash = 0; islash < itarget; islash++)
> + {
> + if (ptarget[islash] == '/')
> + {
> + ptarget[islash] = '\0';
> + if (stat(ptarget, &stat_buf) != 0
> + && mkdir(ptarget, 0755) != 0)
> + ERROR_EXIT( ptarget );
> + ptarget[islash] = '/';
> + }
> + }
> +
> + /* Write the file. */
> + if ((fp_target = fopen(ptarget, "w" )) == NULL)
> + ERROR_EXIT(ptarget);
> + fputs(line, fp_target);
> + if (ferror(fp_target) || fclose(fp_target) != 0)
> + ERROR_EXIT(ptarget);
> + }
> +
> + /* Update target list */
> + ptarget += itarget;
> + *(ptarget-1) = '\n';
> + }
> +
> + /*
> + * Close autoconfig file.
> + * Terminate the target list.
> + */
> + if (fclose(fp_config) != 0)
> + ERROR_EXIT(str_file_autoconf);
> + *ptarget = '\0';
> +
> + /*
> + * Fix up existing files which have no new value.
> + * This is Case 4 and Case 5.
> + *
> + * I re-read the tree and filter it against list_target.
> + * This is crude. But it avoids data copies. Also, list_target
> + * is compact and contiguous, so it easily fits into cache.
> + *
> + * Notice that list_target contains strings separated by \n,
> + * with a \n before the first string and after the last.
> + * fgets gives the incoming names a terminating \n.
> + * So by having an initial \n, strstr will find exact matches.
> + */
> +
> + fp_find = popen("find * -type f -name \"*.h\" -print", "r");
> + if (fp_find == 0)
> + ERROR_EXIT( "find" );
> +
> + line[0] = '\n';
> + while (fgets(line+1, buffer_size, fp_find))
> + {
> + if (strstr(list_target, line) == NULL)
> + {
> + /*
> + * This is an old file with no CONFIG_* flag in autoconf.h.
> + */
> +
> + /* First strip the \n. */
> + line[strlen(line)-1] = '\0';
> +
> + /* Grab size. */
> + if (stat(line+1, &stat_buf) != 0)
> + ERROR_EXIT(line);
> +
> + /* If file is not empty, make it empty and give it a fresh date. */
> + if (stat_buf.st_size != 0)
> + {
> + if ((fp_target = fopen(line+1, "w")) == NULL)
> + ERROR_EXIT(line);
> + if (fclose(fp_target) != 0)
> + ERROR_EXIT(line);
> + }
> + }
> + }
> +
> + if (pclose(fp_find) != 0)
> + ERROR_EXIT("find");
> +
> + return 0;
> +}
> diff -Nru a/scripts/docproc.c b/scripts/docproc.c
> --- a/scripts/docproc.c Thu Mar 11 22:37:19 2004
> +++ /dev/null Wed Dec 31 16:00:00 1969
> @@ -1,387 +0,0 @@
> -/*
> - * docproc is a simple preprocessor for the template files
> - * used as placeholders for the kernel internal documentation.
> - * docproc is used for documentation-frontend and
> - * dependency-generator.
> - * The two usages have in common that they require
> - * some knowledge of the .tmpl syntax, therefore they
> - * are kept together.
> - *
> - * documentation-frontend
> - * Scans the template file and call kernel-doc for
> - * all occurrences of ![EIF]file
> - * Beforehand each referenced file are scanned for
> - * any exported sympols "EXPORT_SYMBOL()" statements.
> - * This is used to create proper -function and
> - * -nofunction arguments in calls to kernel-doc.
> - * Usage: docproc doc file.tmpl
> - *
> - * dependency-generator:
> - * Scans the template file and list all files
> - * referenced in a format recognized by make.
> - * Usage: docproc depend file.tmpl
> - * Writes dependency information to stdout
> - * in the following format:
> - * file.tmpl src.c src2.c
> - * The filenames are obtained from the following constructs:
> - * !Efilename
> - * !Ifilename
> - * !Dfilename
> - * !Ffilename
> - *
> - */
> -
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <string.h>
> -#include <ctype.h>
> -#include <unistd.h>
> -#include <limits.h>
> -#include <sys/types.h>
> -#include <sys/wait.h>
> -
> -/* exitstatus is used to keep track of any failing calls to kernel-doc,
> - * but execution continues. */
> -int exitstatus = 0;
> -
> -typedef void DFL(char *);
> -DFL *defaultline;
> -
> -typedef void FILEONLY(char * file);
> -FILEONLY *internalfunctions;
> -FILEONLY *externalfunctions;
> -FILEONLY *symbolsonly;
> -
> -typedef void FILELINE(char * file, char * line);
> -FILELINE * singlefunctions;
> -FILELINE * entity_system;
> -
> -#define MAXLINESZ 2048
> -#define MAXFILES 250
> -#define KERNELDOCPATH "scripts/"
> -#define KERNELDOC "kernel-doc"
> -#define DOCBOOK "-docbook"
> -#define FUNCTION "-function"
> -#define NOFUNCTION "-nofunction"
> -
> -void usage (void)
> -{
> - fprintf(stderr, "Usage: docproc {doc|depend} file\n");
> - fprintf(stderr, "Input is read from file.tmpl. Output is sent to stdout\n");
> - fprintf(stderr, "doc: frontend when generating kernel documentation\n");
> - fprintf(stderr, "depend: generate list of files referenced within file\n");
> -}
> -
> -/*
> - * Execute kernel-doc with parameters givin in svec
> - */
> -void exec_kernel_doc(char **svec)
> -{
> - pid_t pid;
> - int ret;
> - /* Make sure output generated so far are flushed */
> - fflush(stdout);
> - switch(pid=fork()) {
> - case -1:
> - perror("fork");
> - exit(1);
> - case 0:
> - execvp(KERNELDOCPATH KERNELDOC, svec);
> - perror("exec " KERNELDOCPATH KERNELDOC);
> - exit(1);
> - default:
> - waitpid(pid, &ret ,0);
> - }
> - if (WIFEXITED(ret))
> - exitstatus |= WEXITSTATUS(ret);
> - else
> - exitstatus = 0xff;
> -}
> -
> -/* Types used to create list of all exported symbols in a number of files */
> -struct symbols
> -{
> - char *name;
> -};
> -
> -struct symfile
> -{
> - char *filename;
> - struct symbols *symbollist;
> - int symbolcnt;
> -};
> -
> -struct symfile symfilelist[MAXFILES];
> -int symfilecnt = 0;
> -
> -void add_new_symbol(struct symfile *sym, char * symname)
> -{
> - sym->symbollist =
> - realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *));
> - sym->symbollist[sym->symbolcnt++].name = strdup(symname);
> -}
> -
> -/* Add a filename to the list */
> -struct symfile * add_new_file(char * filename)
> -{
> - symfilelist[symfilecnt++].filename = strdup(filename);
> - return &symfilelist[symfilecnt - 1];
> -}
> -/* Check if file already are present in the list */
> -struct symfile * filename_exist(char * filename)
> -{
> - int i;
> - for (i=0; i < symfilecnt; i++)
> - if (strcmp(symfilelist[i].filename, filename) == 0)
> - return &symfilelist[i];
> - return NULL;
> -}
> -
> -/*
> - * List all files referenced within the template file.
> - * Files are separated by tabs.
> - */
> -void adddep(char * file) { printf("\t%s", file); }
> -void adddep2(char * file, char * line) { line = line; adddep(file); }
> -void noaction(char * line) { line = line; }
> -void noaction2(char * file, char * line) { file = file; line = line; }
> -
> -/* Echo the line without further action */
> -void printline(char * line) { printf("%s", line); }
> -
> -/*
> - * Find all symbols exported with EXPORT_SYMBOL and EXPORT_SYMBOL_GPL
> - * in filename.
> - * All symbols located are stored in symfilelist.
> - */
> -void find_export_symbols(char * filename)
> -{
> - FILE * fp;
> - struct symfile *sym;
> - char line[MAXLINESZ];
> - if (filename_exist(filename) == NULL) {
> - sym = add_new_file(filename);
> - fp = fopen(filename, "r");
> - if (fp == NULL)
> - {
> - fprintf(stderr, "docproc: ");
> - perror(filename);
> - }
> - while(fgets(line, MAXLINESZ, fp)) {
> - char *p;
> - char *e;
> - if (((p = strstr(line, "EXPORT_SYMBOL_GPL")) != 0) ||
> - ((p = strstr(line, "EXPORT_SYMBOL")) != 0)) {
> - /* Skip EXPORT_SYMBOL{_GPL} */
> - while (isalnum(*p) || *p == '_')
> - p++;
> - /* Remove paranteses and additional ws */
> - while (isspace(*p))
> - p++;
> - if (*p != '(')
> - continue; /* Syntax error? */
> - else
> - p++;
> - while (isspace(*p))
> - p++;
> - e = p;
> - while (isalnum(*e) || *e == '_')
> - e++;
> - *e = '\0';
> - add_new_symbol(sym, p);
> - }
> - }
> - fclose(fp);
> - }
> -}
> -
> -/*
> - * Document all external or internal functions in a file.
> - * Call kernel-doc with following parameters:
> - * kernel-doc -docbook -nofunction function_name1 filename
> - * function names are obtained from all the the src files
> - * by find_export_symbols.
> - * intfunc uses -nofunction
> - * extfunc uses -function
> - */
> -void docfunctions(char * filename, char * type)
> -{
> - int i,j;
> - int symcnt = 0;
> - int idx = 0;
> - char **vec;
> -
> - for (i=0; i <= symfilecnt; i++)
> - symcnt += symfilelist[i].symbolcnt;
> - vec = malloc((2 + 2 * symcnt + 2) * sizeof(char*));
> - if (vec == NULL) {
> - perror("docproc: ");
> - exit(1);
> - }
> - vec[idx++] = KERNELDOC;
> - vec[idx++] = DOCBOOK;
> - for (i=0; i < symfilecnt; i++) {
> - struct symfile * sym = &symfilelist[i];
> - for (j=0; j < sym->symbolcnt; j++) {
> - vec[idx++] = type;
> - vec[idx++] = sym->symbollist[j].name;
> - }
> - }
> - vec[idx++] = filename;
> - vec[idx] = NULL;
> - printf("<!-- %s -->\n", filename);
> - exec_kernel_doc(vec);
> - fflush(stdout);
> - free(vec);
> -}
> -void intfunc(char * filename) { docfunctions(filename, NOFUNCTION); }
> -void extfunc(char * filename) { docfunctions(filename, FUNCTION); }
> -
> -/*
> - * Document spåecific function(s) in a file.
> - * Call kernel-doc with the following parameters:
> - * kernel-doc -docbook -function function1 [-function function2]
> - */
> -void singfunc(char * filename, char * line)
> -{
> - char *vec[200]; /* Enough for specific functions */
> - int i, idx = 0;
> - int startofsym = 1;
> - vec[idx++] = KERNELDOC;
> - vec[idx++] = DOCBOOK;
> -
> - /* Split line up in individual parameters preceeded by FUNCTION */
> - for (i=0; line[i]; i++) {
> - if (isspace(line[i])) {
> - line[i] = '\0';
> - startofsym = 1;
> - continue;
> - }
> - if (startofsym) {
> - startofsym = 0;
> - vec[idx++] = FUNCTION;
> - vec[idx++] = &line[i];
> - }
> - }
> - vec[idx++] = filename;
> - vec[idx] = NULL;
> - exec_kernel_doc(vec);
> -}
> -
> -/*
> - * Parse file, calling action specific functions for:
> - * 1) Lines containing !E
> - * 2) Lines containing !I
> - * 3) Lines containing !D
> - * 4) Lines containing !F
> - * 5) Default lines - lines not matching the above
> - */
> -void parse_file(FILE *infile)
> -{
> - char line[MAXLINESZ];
> - char * s;
> - while(fgets(line, MAXLINESZ, infile)) {
> - if (line[0] == '!') {
> - s = line + 2;
> - switch (line[1]) {
> - case 'E':
> - while (*s && !isspace(*s)) s++;
> - *s = '\0';
> - externalfunctions(line+2);
> - break;
> - case 'I':
> - while (*s && !isspace(*s)) s++;
> - *s = '\0';
> - internalfunctions(line+2);
> - break;
> - case 'D':
> - while (*s && !isspace(*s)) s++;
> - *s = '\0';
> - symbolsonly(line+2);
> - break;
> - case 'F':
> - /* filename */
> - while (*s && !isspace(*s)) s++;
> - *s++ = '\0';
> - /* function names */
> - while (isspace(*s))
> - s++;
> - singlefunctions(line +2, s);
> - break;
> - default:
> - defaultline(line);
> - }
> - }
> - else {
> - defaultline(line);
> - }
> - }
> - fflush(stdout);
> -}
> -
> -
> -int main(int argc, char *argv[])
> -{
> - FILE * infile;
> - if (argc != 3) {
> - usage();
> - exit(1);
> - }
> - /* Open file, exit on error */
> - infile = fopen(argv[2], "r");
> - if (infile == NULL) {
> - fprintf(stderr, "docproc: ");
> - perror(argv[2]);
> - exit(2);
> - }
> -
> - if (strcmp("doc", argv[1]) == 0)
> - {
> - /* Need to do this in two passes.
> - * First pass is used to collect all symbols exported
> - * in the various files.
> - * Second pass generate the documentation.
> - * This is required because function are declared
> - * and exported in different files :-((
> - */
> - /* Collect symbols */
> - defaultline = noaction;
> - internalfunctions = find_export_symbols;
> - externalfunctions = find_export_symbols;
> - symbolsonly = find_export_symbols;
> - singlefunctions = noaction2;
> - parse_file(infile);
> -
> - /* Rewind to start from beginning of file again */
> - fseek(infile, 0, SEEK_SET);
> - defaultline = printline;
> - internalfunctions = intfunc;
> - externalfunctions = extfunc;
> - symbolsonly = printline;
> - singlefunctions = singfunc;
> -
> - parse_file(infile);
> - }
> - else if (strcmp("depend", argv[1]) == 0)
> - {
> - /* Create first part of dependency chain
> - * file.tmpl */
> - printf("%s\t", argv[2]);
> - defaultline = noaction;
> - internalfunctions = adddep;
> - externalfunctions = adddep;
> - symbolsonly = adddep;
> - singlefunctions = adddep2;
> - parse_file(infile);
> - printf("\n");
> - }
> - else
> - {
> - fprintf(stderr, "Unknown option: %s\n", argv[1]);
> - exit(1);
> - }
> - fclose(infile);
> - fflush(stdout);
> - return exitstatus;
> -}
> -
> diff -Nru a/scripts/fixdep.c b/scripts/fixdep.c
> --- a/scripts/fixdep.c Thu Mar 11 22:37:19 2004
> +++ /dev/null Wed Dec 31 16:00:00 1969
> @@ -1,381 +0,0 @@
> -/*
> - * "Optimize" a list of dependencies as spit out by gcc -MD
> - * for the kernel build
> - * ===========================================================================
> - *
> - * Author Kai Germaschewski
> - * Copyright 2002 by Kai Germaschewski <kai.germaschewski@gmx.de>
> - *
> - * This software may be used and distributed according to the terms
> - * of the GNU General Public License, incorporated herein by reference.
> - *
> - *
> - * Introduction:
> - *
> - * gcc produces a very nice and correct list of dependencies which
> - * tells make when to remake a file.
> - *
> - * To use this list as-is however has the drawback that virtually
> - * every file in the kernel includes <linux/config.h> which then again
> - * includes <linux/autoconf.h>
> - *
> - * If the user re-runs make *config, linux/autoconf.h will be
> - * regenerated. make notices that and will rebuild every file which
> - * includes autoconf.h, i.e. basically all files. This is extremely
> - * annoying if the user just changed CONFIG_HIS_DRIVER from n to m.
> - *
> - * So we play the same trick that "mkdep" played before. We replace
> - * the dependency on linux/autoconf.h by a dependency on every config
> - * option which is mentioned in any of the listed prequisites.
> - *
> - * To be exact, split-include populates a tree in include/config/,
> - * e.g. include/config/his/driver.h, which contains the #define/#undef
> - * for the CONFIG_HIS_DRIVER option.
> - *
> - * So if the user changes his CONFIG_HIS_DRIVER option, only the objects
> - * which depend on "include/linux/config/his/driver.h" will be rebuilt,
> - * so most likely only his driver ;-)
> - *
> - * The idea above dates, by the way, back to Michael E Chastain, AFAIK.
> - *
> - * So to get dependencies right, there two issues:
> - * o if any of the files the compiler read changed, we need to rebuild
> - * o if the command line given to the compile the file changed, we
> - * better rebuild as well.
> - *
> - * The former is handled by using the -MD output, the later by saving
> - * the command line used to compile the old object and comparing it
> - * to the one we would now use.
> - *
> - * Again, also this idea is pretty old and has been discussed on
> - * kbuild-devel a long time ago. I don't have a sensibly working
> - * internet connection right now, so I rather don't mention names
> - * without double checking.
> - *
> - * This code here has been based partially based on mkdep.c, which
> - * says the following about its history:
> - *
> - * Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
> - * This is a C version of syncdep.pl by Werner Almesberger.
> - *
> - *
> - * It is invoked as
> - *
> - * fixdep <depfile> <target> <cmdline>
> - *
> - * and will read the dependency file <depfile>
> - *
> - * The transformed dependency snipped is written to stdout.
> - *
> - * It first generates a line
> - *
> - * cmd_<target> = <cmdline>
> - *
> - * and then basically copies the .<target>.d file to stdout, in the
> - * process filtering out the dependency on linux/autoconf.h and adding
> - * dependencies on include/config/my/option.h for every
> - * CONFIG_MY_OPTION encountered in any of the prequisites.
> - *
> - * It will also filter out all the dependencies on *.ver. We need
> - * to make sure that the generated version checksum are globally up
> - * to date before even starting the recursive build, so it's too late
> - * at this point anyway.
> - *
> - * The algorithm to grep for "CONFIG_..." is bit unusual, but should
> - * be fast ;-) We don't even try to really parse the header files, but
> - * merely grep, i.e. if CONFIG_FOO is mentioned in a comment, it will
> - * be picked up as well. It's not a problem with respect to
> - * correctness, since that can only give too many dependencies, thus
> - * we cannot miss a rebuild. Since people tend to not mention totally
> - * unrelated CONFIG_ options all over the place, it's not an
> - * efficiency problem either.
> - *
> - * (Note: it'd be easy to port over the complete mkdep state machine,
> - * but I don't think the added complexity is worth it)
> - */
> -
> -#include <sys/types.h>
> -#include <sys/stat.h>
> -#include <sys/mman.h>
> -#include <unistd.h>
> -#include <fcntl.h>
> -#include <string.h>
> -#include <stdlib.h>
> -#include <stdio.h>
> -#include <limits.h>
> -#include <ctype.h>
> -#include <netinet/in.h>
> -
> -#define INT_CONF ntohl(0x434f4e46)
> -#define INT_ONFI ntohl(0x4f4e4649)
> -#define INT_NFIG ntohl(0x4e464947)
> -#define INT_FIG_ ntohl(0x4649475f)
> -
> -char *target;
> -char *depfile;
> -char *cmdline;
> -
> -void usage(void)
> -
> -{
> - fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
> - exit(1);
> -}
> -
> -void print_cmdline(void)
> -{
> - printf("cmd_%s := %s\n\n", target, cmdline);
> -}
> -
> -char * str_config = NULL;
> -int size_config = 0;
> -int len_config = 0;
> -
> -/*
> - * Grow the configuration string to a desired length.
> - * Usually the first growth is plenty.
> - */
> -void grow_config(int len)
> -{
> - while (len_config + len > size_config) {
> - if (size_config == 0)
> - size_config = 2048;
> - str_config = realloc(str_config, size_config *= 2);
> - if (str_config == NULL)
> - { perror("fixdep:malloc"); exit(1); }
> - }
> -}
> -
> -
> -
> -/*
> - * Lookup a value in the configuration string.
> - */
> -int is_defined_config(const char * name, int len)
> -{
> - const char * pconfig;
> - const char * plast = str_config + len_config - len;
> - for ( pconfig = str_config + 1; pconfig < plast; pconfig++ ) {
> - if (pconfig[ -1] == '\n'
> - && pconfig[len] == '\n'
> - && !memcmp(pconfig, name, len))
> - return 1;
> - }
> - return 0;
> -}
> -
> -/*
> - * Add a new value to the configuration string.
> - */
> -void define_config(const char * name, int len)
> -{
> - grow_config(len + 1);
> -
> - memcpy(str_config+len_config, name, len);
> - len_config += len;
> - str_config[len_config++] = '\n';
> -}
> -
> -/*
> - * Clear the set of configuration strings.
> - */
> -void clear_config(void)
> -{
> - len_config = 0;
> - define_config("", 0);
> -}
> -
> -/*
> - * Record the use of a CONFIG_* word.
> - */
> -void use_config(char *m, int slen)
> -{
> - char s[PATH_MAX];
> - char *p;
> -
> - if (is_defined_config(m, slen))
> - return;
> -
> - define_config(m, slen);
> -
> - memcpy(s, m, slen); s[slen] = 0;
> -
> - for (p = s; p < s + slen; p++) {
> - if (*p == '_')
> - *p = '/';
> - else
> - *p = tolower((unsigned char)*p);
> - }
> - printf(" $(wildcard include/config/%s.h) \\\n", s);
> -}
> -
> -void parse_config_file(char *map, size_t len)
> -{
> - int *end = (int *) (map + len);
> - /* start at +1, so that p can never be < map */
> - int *m = (int *) map + 1;
> - char *p, *q;
> -
> - for (; m < end; m++) {
> - if (*m == INT_CONF) { p = (char *) m ; goto conf; }
> - if (*m == INT_ONFI) { p = (char *) m-1; goto conf; }
> - if (*m == INT_NFIG) { p = (char *) m-2; goto conf; }
> - if (*m == INT_FIG_) { p = (char *) m-3; goto conf; }
> - continue;
> - conf:
> - if (p > map + len - 7)
> - continue;
> - if (memcmp(p, "CONFIG_", 7))
> - continue;
> - for (q = p + 7; q < map + len; q++) {
> - if (!(isalnum(*q) || *q == '_'))
> - goto found;
> - }
> - continue;
> -
> - found:
> - use_config(p+7, q-p-7);
> - }
> -}
> -
> -/* test is s ends in sub */
> -int strrcmp(char *s, char *sub)
> -{
> - int slen = strlen(s);
> - int sublen = strlen(sub);
> -
> - if (sublen > slen)
> - return 1;
> -
> - return memcmp(s + slen - sublen, sub, sublen);
> -}
> -
> -void do_config_file(char *filename)
> -{
> - struct stat st;
> - int fd;
> - void *map;
> -
> - fd = open(filename, O_RDONLY);
> - if (fd < 0) {
> - fprintf(stderr, "fixdep: ");
> - perror(filename);
> - exit(2);
> - }
> - fstat(fd, &st);
> - if (st.st_size == 0) {
> - close(fd);
> - return;
> - }
> - map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
> - if ((long) map == -1) {
> - perror("fixdep: mmap");
> - close(fd);
> - return;
> - }
> -
> - parse_config_file(map, st.st_size);
> -
> - munmap(map, st.st_size);
> -
> - close(fd);
> -}
> -
> -void parse_dep_file(void *map, size_t len)
> -{
> - char *m = map;
> - char *end = m + len;
> - char *p;
> - char s[PATH_MAX];
> -
> - p = strchr(m, ':');
> - if (!p) {
> - fprintf(stderr, "fixdep: parse error\n");
> - exit(1);
> - }
> - memcpy(s, m, p-m); s[p-m] = 0;
> - printf("deps_%s := \\\n", target);
> - m = p+1;
> -
> - clear_config();
> -
> - while (m < end) {
> - while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
> - m++;
> - p = m;
> - while (p < end && *p != ' ') p++;
> - if (p == end) {
> - do p--; while (!isalnum(*p));
> - p++;
> - }
> - memcpy(s, m, p-m); s[p-m] = 0;
> - if (strrcmp(s, "include/linux/autoconf.h") &&
> - strrcmp(s, ".ver")) {
> - printf(" %s \\\n", s);
> - do_config_file(s);
> - }
> - m = p + 1;
> - }
> - printf("\n%s: $(deps_%s)\n\n", target, target);
> - printf("$(deps_%s):\n", target);
> -}
> -
> -void print_deps(void)
> -{
> - struct stat st;
> - int fd;
> - void *map;
> -
> - fd = open(depfile, O_RDONLY);
> - if (fd < 0) {
> - fprintf(stderr, "fixdep: ");
> - perror(depfile);
> - exit(2);
> - }
> - fstat(fd, &st);
> - if (st.st_size == 0) {
> - fprintf(stderr,"fixdep: %s is empty\n",depfile);
> - close(fd);
> - return;
> - }
> - map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
> - if ((long) map == -1) {
> - perror("fixdep: mmap");
> - close(fd);
> - return;
> - }
> -
> - parse_dep_file(map, st.st_size);
> -
> - munmap(map, st.st_size);
> -
> - close(fd);
> -}
> -
> -void traps(void)
> -{
> - static char test[] __attribute__((aligned(sizeof(int)))) = "CONF";
> -
> - if (*(int *)test != INT_CONF) {
> - fprintf(stderr, "fixdep: sizeof(int) != 4 or wrong endianess? %#x\n",
> - *(int *)test);
> - exit(2);
> - }
> -}
> -
> -int main(int argc, char *argv[])
> -{
> - traps();
> -
> - if (argc != 4)
> - usage();
> -
> - depfile = argv[1];
> - target = argv[2];
> - cmdline = argv[3];
> -
> - print_cmdline();
> - print_deps();
> -
> - return 0;
> -}
> diff -Nru a/scripts/split-include.c b/scripts/split-include.c
> --- a/scripts/split-include.c Thu Mar 11 22:37:19 2004
> +++ /dev/null Wed Dec 31 16:00:00 1969
> @@ -1,226 +0,0 @@
> -/*
> - * split-include.c
> - *
> - * Copyright abandoned, Michael Chastain, <mailto:mec@shout.net>.
> - * This is a C version of syncdep.pl by Werner Almesberger.
> - *
> - * This program takes autoconf.h as input and outputs a directory full
> - * of one-line include files, merging onto the old values.
> - *
> - * Think of the configuration options as key-value pairs. Then there
> - * are five cases:
> - *
> - * key old value new value action
> - *
> - * KEY-1 VALUE-1 VALUE-1 leave file alone
> - * KEY-2 VALUE-2A VALUE-2B write VALUE-2B into file
> - * KEY-3 - VALUE-3 write VALUE-3 into file
> - * KEY-4 VALUE-4 - write an empty file
> - * KEY-5 (empty) - leave old empty file alone
> - */
> -
> -#include <sys/stat.h>
> -#include <sys/types.h>
> -
> -#include <ctype.h>
> -#include <errno.h>
> -#include <fcntl.h>
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <string.h>
> -#include <unistd.h>
> -
> -#define ERROR_EXIT(strExit) \
> - { \
> - const int errnoSave = errno; \
> - fprintf(stderr, "%s: ", str_my_name); \
> - errno = errnoSave; \
> - perror((strExit)); \
> - exit(1); \
> - }
> -
> -
> -
> -int main(int argc, const char * argv [])
> -{
> - const char * str_my_name;
> - const char * str_file_autoconf;
> - const char * str_dir_config;
> -
> - FILE * fp_config;
> - FILE * fp_target;
> - FILE * fp_find;
> -
> - int buffer_size;
> -
> - char * line;
> - char * old_line;
> - char * list_target;
> - char * ptarget;
> -
> - struct stat stat_buf;
> -
> - /* Check arg count. */
> - if (argc != 3)
> - {
> - fprintf(stderr, "%s: wrong number of arguments.\n", argv[0]);
> - exit(1);
> - }
> -
> - str_my_name = argv[0];
> - str_file_autoconf = argv[1];
> - str_dir_config = argv[2];
> -
> - /* Find a buffer size. */
> - if (stat(str_file_autoconf, &stat_buf) != 0)
> - ERROR_EXIT(str_file_autoconf);
> - buffer_size = 2 * stat_buf.st_size + 4096;
> -
> - /* Allocate buffers. */
> - if ( (line = malloc(buffer_size)) == NULL
> - || (old_line = malloc(buffer_size)) == NULL
> - || (list_target = malloc(buffer_size)) == NULL )
> - ERROR_EXIT(str_file_autoconf);
> -
> - /* Open autoconfig file. */
> - if ((fp_config = fopen(str_file_autoconf, "r")) == NULL)
> - ERROR_EXIT(str_file_autoconf);
> -
> - /* Make output directory if needed. */
> - if (stat(str_dir_config, &stat_buf) != 0)
> - {
> - if (mkdir(str_dir_config, 0755) != 0)
> - ERROR_EXIT(str_dir_config);
> - }
> -
> - /* Change to output directory. */
> - if (chdir(str_dir_config) != 0)
> - ERROR_EXIT(str_dir_config);
> -
> - /* Put initial separator into target list. */
> - ptarget = list_target;
> - *ptarget++ = '\n';
> -
> - /* Read config lines. */
> - while (fgets(line, buffer_size, fp_config))
> - {
> - const char * str_config;
> - int is_same;
> - int itarget;
> -
> - if (line[0] != '#')
> - continue;
> - if ((str_config = strstr(line, "CONFIG_")) == NULL)
> - continue;
> -
> - /* Make the output file name. */
> - str_config += sizeof("CONFIG_") - 1;
> - for (itarget = 0; !isspace(str_config[itarget]); itarget++)
> - {
> - int c = (unsigned char) str_config[itarget];
> - if (isupper(c)) c = tolower(c);
> - if (c == '_') c = '/';
> - ptarget[itarget] = c;
> - }
> - ptarget[itarget++] = '.';
> - ptarget[itarget++] = 'h';
> - ptarget[itarget++] = '\0';
> -
> - /* Check for existing file. */
> - is_same = 0;
> - if ((fp_target = fopen(ptarget, "r")) != NULL)
> - {
> - fgets(old_line, buffer_size, fp_target);
> - if (fclose(fp_target) != 0)
> - ERROR_EXIT(ptarget);
> - if (!strcmp(line, old_line))
> - is_same = 1;
> - }
> -
> - if (!is_same)
> - {
> - /* Auto-create directories. */
> - int islash;
> - for (islash = 0; islash < itarget; islash++)
> - {
> - if (ptarget[islash] == '/')
> - {
> - ptarget[islash] = '\0';
> - if (stat(ptarget, &stat_buf) != 0
> - && mkdir(ptarget, 0755) != 0)
> - ERROR_EXIT( ptarget );
> - ptarget[islash] = '/';
> - }
> - }
> -
> - /* Write the file. */
> - if ((fp_target = fopen(ptarget, "w" )) == NULL)
> - ERROR_EXIT(ptarget);
> - fputs(line, fp_target);
> - if (ferror(fp_target) || fclose(fp_target) != 0)
> - ERROR_EXIT(ptarget);
> - }
> -
> - /* Update target list */
> - ptarget += itarget;
> - *(ptarget-1) = '\n';
> - }
> -
> - /*
> - * Close autoconfig file.
> - * Terminate the target list.
> - */
> - if (fclose(fp_config) != 0)
> - ERROR_EXIT(str_file_autoconf);
> - *ptarget = '\0';
> -
> - /*
> - * Fix up existing files which have no new value.
> - * This is Case 4 and Case 5.
> - *
> - * I re-read the tree and filter it against list_target.
> - * This is crude. But it avoids data copies. Also, list_target
> - * is compact and contiguous, so it easily fits into cache.
> - *
> - * Notice that list_target contains strings separated by \n,
> - * with a \n before the first string and after the last.
> - * fgets gives the incoming names a terminating \n.
> - * So by having an initial \n, strstr will find exact matches.
> - */
> -
> - fp_find = popen("find * -type f -name \"*.h\" -print", "r");
> - if (fp_find == 0)
> - ERROR_EXIT( "find" );
> -
> - line[0] = '\n';
> - while (fgets(line+1, buffer_size, fp_find))
> - {
> - if (strstr(list_target, line) == NULL)
> - {
> - /*
> - * This is an old file with no CONFIG_* flag in autoconf.h.
> - */
> -
> - /* First strip the \n. */
> - line[strlen(line)-1] = '\0';
> -
> - /* Grab size. */
> - if (stat(line+1, &stat_buf) != 0)
> - ERROR_EXIT(line);
> -
> - /* If file is not empty, make it empty and give it a fresh date. */
> - if (stat_buf.st_size != 0)
> - {
> - if ((fp_target = fopen(line+1, "w")) == NULL)
> - ERROR_EXIT(line);
> - if (fclose(fp_target) != 0)
> - ERROR_EXIT(line);
> - }
> - }
> - }
> -
> - if (pclose(fp_find) != 0)
> - ERROR_EXIT("find");
> -
> - return 0;
> -}
>
>
> --
>
--
The church is near, but the road is icy.
The bar is far, but i will walk carefully. - Russian proverb
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Fw: Re: parallel make problems (-mm) -now found in 2.6.5-rc1 also
2004-03-22 21:16 ` Fw: Re: parallel make problems (-mm) -now found in 2.6.5-rc1 also cliff white
@ 2004-03-23 5:41 ` Sam Ravnborg
2004-03-23 17:56 ` cliff white
0 siblings, 1 reply; 3+ messages in thread
From: Sam Ravnborg @ 2004-03-23 5:41 UTC (permalink / raw)
To: cliff white; +Cc: sam, rddunlap, linux-kernel, maryedie, cherry
On Mon, Mar 22, 2004 at 01:16:29PM -0800, cliff white wrote:
>
> Hi Sam,
> randy dunlap is on vacation this week,
> (and i was last week ) so i am trying to get a resolution to
> the parallel make problem.
>
> Tested your patch below and it didn't help us. The patch doesn't
> apply clean past 2.6.4-mm1.
>
> We now see this exact failure against 2.6.5-rc1 for our 8-way machines,
> so we have much concern.
>
> Is there another fix around we could try?
I've updated the patch since, and it is now in Linus latest - thanks to Andrew.
A good sign you do not have the latest version is the fact that you still
refer to fixdep in scripts/ (my bad in the frst version).
Could you either try with Linus latest, or at least take a verbatim copy
of the Makefile from there.
I have reports of succes with make -j10 from others.
If it still fails please mail me the output without and with V=1,
then I will dig into it.
Sam
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Fw: Re: parallel make problems (-mm) -now found in 2.6.5-rc1 also
2004-03-23 5:41 ` Sam Ravnborg
@ 2004-03-23 17:56 ` cliff white
0 siblings, 0 replies; 3+ messages in thread
From: cliff white @ 2004-03-23 17:56 UTC (permalink / raw)
To: linux-kernel
On Tue, 23 Mar 2004 06:41:24 +0100
Sam Ravnborg <sam@ravnborg.org> wrote:
> On Mon, Mar 22, 2004 at 01:16:29PM -0800, cliff white wrote:
> >
> > Hi Sam,
> > randy dunlap is on vacation this week,
> > (and i was last week ) so i am trying to get a resolution to
> > the parallel make problem.
> >
> > Tested your patch below and it didn't help us. The patch doesn't
> > apply clean past 2.6.4-mm1.
> >
> > We now see this exact failure against 2.6.5-rc1 for our 8-way machines,
> > so we have much concern.
> >
> > Is there another fix around we could try?
>
> I've updated the patch since, and it is now in Linus latest - thanks to Andrew.
> A good sign you do not have the latest version is the fact that you still
> refer to fixdep in scripts/ (my bad in the frst version).
> Could you either try with Linus latest, or at least take a verbatim copy
> of the Makefile from there.
>
> I have reports of succes with make -j10 from others.
>
> If it still fails please mail me the output without and with V=1,
> then I will dig into it.
Everything's happy on the STP machines.
2.6.5-rc2 and 2.6.5-rc2-mm1 compiled just fine on the 8-ways.
Thanks
cliffw
>
> Sam
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
The church is near, but the road is icy.
The bar is far, but i will walk carefully. - Russian proverb
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-03-23 17:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20040312120024.2cef94c8.rddunlap@osdl.org>
2004-03-22 21:16 ` Fw: Re: parallel make problems (-mm) -now found in 2.6.5-rc1 also cliff white
2004-03-23 5:41 ` Sam Ravnborg
2004-03-23 17:56 ` cliff white
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).