* [PATCH 1/2]: Serial 8250 optionally skip autodetection
@ 2004-08-16 12:57 Tony Lindgren
2004-08-16 13:04 ` [PATCH 2/2]: Serial 8250 OMAP support Tony Lindgren
0 siblings, 1 reply; 2+ messages in thread
From: Tony Lindgren @ 2004-08-16 12:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Russell King
[-- Attachment #1: Type: text/plain, Size: 362 bytes --]
Hi Russell,
Following patch allows 8250 compatible serial drivers to optionally
define the port type to allow skipping the serial port autodetection.
This is needed for OMAP serial port, which is 8250 compatible, but
requires extra FIFO settings, and does not reliably work with the
autodetection. The OMAP serial port support is in patch 2/2.
Regards,
Tony
[-- Attachment #2: patch-2.6.8.1-8250-serial-optional-skip-autodetect --]
[-- Type: text/plain, Size: 1225 bytes --]
diff -Nru a/drivers/serial/8250.c b/drivers/serial/8250.c
--- a/drivers/serial/8250.c 2004-08-16 05:15:19 -07:00
+++ b/drivers/serial/8250.c 2004-08-16 05:15:19 -07:00
@@ -2056,6 +2056,7 @@
{
struct uart_port port;
+ port.type = req->type;
port.iobase = req->port;
port.membase = req->iomem_base;
port.irq = req->irq;
@@ -2063,9 +2064,12 @@
port.fifosize = req->xmit_fifo_size;
port.regshift = req->iomem_reg_shift;
port.iotype = req->io_type;
- port.flags = req->flags | UPF_BOOT_AUTOCONF;
+ port.flags = req->flags;
port.mapbase = req->iomap_base;
port.line = line;
+
+ if (req->type != PORT_OMAP)
+ req->flags |= UPF_BOOT_AUTOCONF;
if (share_irqs)
port.flags |= UPF_SHARE_IRQ;
diff -Nru a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
--- a/drivers/serial/serial_core.c 2004-08-16 05:15:19 -07:00
+++ b/drivers/serial/serial_core.c 2004-08-16 05:15:19 -07:00
@@ -2375,6 +2375,7 @@
* If the port is already initialised, don't touch it.
*/
if (state->port->type == PORT_UNKNOWN) {
+ state->port->type = port->type;
state->port->iobase = port->iobase;
state->port->membase = port->membase;
state->port->irq = port->irq;
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH 2/2]: Serial 8250 OMAP support
2004-08-16 12:57 [PATCH 1/2]: Serial 8250 optionally skip autodetection Tony Lindgren
@ 2004-08-16 13:04 ` Tony Lindgren
0 siblings, 0 replies; 2+ messages in thread
From: Tony Lindgren @ 2004-08-16 13:04 UTC (permalink / raw)
To: linux-kernel; +Cc: Russell King, Juha Yrjola
[-- Attachment #1: Type: text/plain, Size: 62 bytes --]
Following patch adds OMAP support to the 8250 serial driver.
[-- Attachment #2: patch-2.6.8.1-8250-serial-add-omap-support --]
[-- Type: text/plain, Size: 8928 bytes --]
diff -Nru a/drivers/serial/8250.c b/drivers/serial/8250.c
--- a/drivers/serial/8250.c 2004-08-16 05:15:36 -07:00
+++ b/drivers/serial/8250.c 2004-08-16 05:15:36 -07:00
@@ -173,6 +173,7 @@
{ "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO },
{ "NS16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO | UART_NATSEMI },
{ "XScale", 32, UART_CLEAR_FIFO | UART_USE_FIFO },
+ { "OMAP UART", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }
};
static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
@@ -1215,6 +1216,28 @@
serial_outp(up, UART_LCR, 0);
}
+#ifdef CONFIG_ARCH_OMAP
+ if (up->port.type == PORT_OMAP) {
+ serial_outp(up, UART_OMAP_MDR1, 0x07); /* disable UART */
+ serial_outp(up, UART_LCR, 0xBF); /* select EFR */
+ serial_outp(up, UART_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_LCR, UART_LCR_DLAB); /* set DLAB */
+ serial_outp(up, UART_DLL, 0x00);
+ serial_outp(up, UART_DLM, 0x00);
+ serial_outp(up, UART_LCR, 0x00); /* reset DLAB */
+ serial_outp(up, UART_OMAP_SCR, 0x08);
+ serial_outp(up, UART_FCR, 0x00);
+ serial_outp(up, UART_MCR, 0x40); /* enable TCR/TLR */
+ serial_outp(up, UART_OMAP_TCR, 0x0F);
+ serial_outp(up, UART_OMAP_TLR, 0x00);
+ serial_outp(up, UART_MCR, 0x00);
+ serial_outp(up, UART_LCR, 0xBF); /* select EFR */
+ serial_outp(up, UART_EFR, 0x00);
+ serial_outp(up, UART_LCR, 0x00); /* reset DLAB */
+ serial_outp(up, UART_OMAP_MDR1, 0x00); /* enable UART */
+ }
+#endif
+
#ifdef CONFIG_SERIAL_8250_RSA
/*
* If this is an RSA port, see if we can kick it up to the
@@ -1447,6 +1470,10 @@
else if (up->port.type == PORT_RSA)
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
#endif
+#ifdef CONFIG_ARCH_OMAP
+ else if (up->port.type == PORT_OMAP)
+ fcr = UART_FCR_T_TRIGGER_56 | UART_FCR_R_TRIGGER_60 | UART_FCR_ENABLE_FIFO;
+#endif
else
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
}
@@ -1519,6 +1546,16 @@
serial_outp(up, UART_EFR,
termios->c_cflag & CRTSCTS ? UART_EFR_CTS :0);
}
+
+#ifdef CONFIG_ARCH_OMAP1510 /* Needed for 1510 only */
+ if (up->port.type == PORT_OMAP && cpu_is_omap1510()) {
+ if (baud == 115200) {
+ quot = 1;
+ serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
+ } else
+ serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
+ }
+#endif
if (up->capabilities & UART_NATSEMI) {
/* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
diff -Nru a/drivers/serial/8250_omap.c b/drivers/serial/8250_omap.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/drivers/serial/8250_omap.c 2004-08-16 05:15:36 -07:00
@@ -0,0 +1,125 @@
+/*
+ * linux/drivers/serial/8250_omap.c
+ * Partially copied from 8250_acorn.c
+ *
+ * Copyright (C) 1996-2003 Russell King.
+ * Copyright (C) 2004 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/arch/serial.h>
+#include <asm/string.h>
+
+#define UART_SYSC 0x15
+
+#define MAX_PORTS 3
+
+struct omap_serial_port {
+ unsigned long baddr;
+ unsigned int irq;
+};
+
+static const struct omap_serial_port omap1510_serial_ports[] = {
+ { .baddr = (unsigned long)IO_ADDRESS(OMAP_UART1_BASE), .irq = INT_UART1 },
+ { .baddr = (unsigned long)IO_ADDRESS(OMAP_UART2_BASE), .irq = INT_UART2 },
+ { .baddr = (unsigned long)IO_ADDRESS(OMAP_UART3_BASE), .irq = INT_UART3 },
+};
+
+static const struct omap_serial_port omap730_serial_ports[] = {
+ { .baddr = (unsigned long)IO_ADDRESS(OMAP_UART1_BASE), .irq = INT_730_UART_MODEM_1 },
+ { .baddr = (unsigned long)IO_ADDRESS(OMAP_UART2_BASE), .irq = INT_730_UART_MODEM_IRDA_2 },
+};
+
+static void
+reset_port(struct serial_struct *port)
+{
+ if (cpu_is_omap1510())
+ return;
+ writeb(0x01, port->iomap_base + (UART_SYSC << port->iomem_reg_shift));
+ while (!(readb(port->iomap_base + (UART_SYSC << port->iomem_reg_shift)) & 0x01));
+}
+
+static inline int
+serial_register_onedev(const struct omap_serial_port *port)
+{
+ struct serial_struct req;
+
+ memset(&req, 0, sizeof(req));
+ req.type = PORT_OMAP;
+ req.irq = port->irq;
+ req.flags = UPF_SKIP_TEST;
+ req.io_type = UPIO_MEM;
+ req.iomem_base = (unsigned char *) port->baddr;
+ req.iomap_base = port->baddr;
+
+ if (cpu_is_omap1510()) {
+ req.baud_base = OMAP1510_BASE_BAUD;
+ req.iomem_reg_shift = 2;
+ }
+ if (cpu_is_omap1610() || cpu_is_omap5912() || cpu_is_omap1710()) {
+ req.baud_base = OMAP1610_BASE_BAUD;
+ req.iomem_reg_shift = 2;
+ }
+ if (cpu_is_omap730()) {
+ req.baud_base = OMAP1610_BASE_BAUD;
+ req.iomem_reg_shift = 0;
+ }
+
+ reset_port(&req);
+
+ return register_serial(&req);
+}
+
+static int port_count = 0;
+static int ports[MAX_PORTS];
+
+static int __init omap_serial_init(void)
+{
+ int i;
+ const struct omap_serial_port *port_table = NULL;
+
+ if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap5912()
+ || cpu_is_omap1710()) {
+ port_count = 3;
+ port_table = omap1510_serial_ports;
+ }
+ if (cpu_is_omap730()) {
+ port_count = 2;
+ port_table = omap730_serial_ports;
+ }
+ for (i = 0; i < port_count; i++) {
+ ports[i] = serial_register_onedev(&port_table[i]);
+ }
+ printk(KERN_INFO "OMAP serial: activated %d ports\n", i);
+
+ return 0;
+}
+
+static void __exit omap_serial_exit(void)
+{
+ int i;
+
+ for (i = 0; i < port_count; i++)
+ unregister_serial(ports[i]);
+}
+
+MODULE_AUTHOR("Juha Yrjölä");
+MODULE_DESCRIPTION("OMAP 8250-compatible serial port driver");
+MODULE_LICENSE("GPL");
+
+module_init(omap_serial_init);
+module_exit(omap_serial_exit);
diff -Nru a/drivers/serial/Kconfig b/drivers/serial/Kconfig
--- a/drivers/serial/Kconfig 2004-08-16 05:15:36 -07:00
+++ b/drivers/serial/Kconfig 2004-08-16 05:15:36 -07:00
@@ -166,6 +166,13 @@
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
+config SERIAL_8250_OMAP
+ tristate "OMAP serial port support"
+ depends on ARM && ARCH_OMAP && SERIAL_8250
+ help
+ Say Y or M here if you want to use the integrated UARTs of the TI
+ OMAP multimedia processor.
+
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
depends on ARM_AMBA
diff -Nru a/drivers/serial/Makefile b/drivers/serial/Makefile
--- a/drivers/serial/Makefile 2004-08-16 05:15:36 -07:00
+++ b/drivers/serial/Makefile 2004-08-16 05:15:36 -07:00
@@ -15,6 +15,7 @@
obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y)
obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
diff -Nru a/include/linux/serial_core.h b/include/linux/serial_core.h
--- a/include/linux/serial_core.h 2004-08-16 05:15:36 -07:00
+++ b/include/linux/serial_core.h 2004-08-16 05:15:36 -07:00
@@ -37,7 +37,8 @@
#define PORT_RSA 13
#define PORT_NS16550A 14
#define PORT_XSCALE 15
-#define PORT_MAX_8250 15 /* max port ID */
+#define PORT_OMAP 16
+#define PORT_MAX_8250 16 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
diff -Nru a/include/linux/serial_reg.h b/include/linux/serial_reg.h
--- a/include/linux/serial_reg.h 2004-08-16 05:15:36 -07:00
+++ b/include/linux/serial_reg.h 2004-08-16 05:15:36 -07:00
@@ -294,5 +294,21 @@
#define SERIAL_RSA_BAUD_BASE (921600)
#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
+/*
+ * Extra serial register definitions for the internal UARTs
+ * in TI OMAP processors.
+ */
+#define UART_OMAP_TCR 0x06 /* Transmission control register */
+#define UART_OMAP_TLR 0x07 /* Trigger level register */
+#define UART_OMAP_MDR1 0x08 /* Mode definition register */
+#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
+#define UART_OMAP_SCR 0x10 /* Supplementary control register */
+#define UART_OMAP_SSR 0x11 /* Supplementary status register */
+#define UART_OMAP_EBLR 0x12 /* BOF length register */
+#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */
+#define UART_OMAP_MVER 0x14 /* Module version register */
+#define UART_OMAP_SYSC 0x15 /* System configuration register */
+#define UART_OMAP_SYSS 0x16 /* System status register */
+
#endif /* _LINUX_SERIAL_REG_H */
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-08-16 13:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-08-16 12:57 [PATCH 1/2]: Serial 8250 optionally skip autodetection Tony Lindgren
2004-08-16 13:04 ` [PATCH 2/2]: Serial 8250 OMAP support Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).