linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [patch 5/8]  serial/68360serial: replace  schedule_timeout() with msleep_interruptible()
@ 2004-10-30 22:47 janitor
  2004-11-01 12:35 ` Russell King
  0 siblings, 1 reply; 2+ messages in thread
From: janitor @ 2004-10-30 22:47 UTC (permalink / raw)
  To: rmk+lkml; +Cc: akpm, linux-kernel, janitor, nacc




Any comments would be appreciated.

Description: Use msleep_interruptible() instead of
schedule_timeout() to guarantee the task delays as expected.
Use set_current_state() instead of direct assignment of current->state.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
---

 linux-2.6.10-rc1-max/drivers/serial/68360serial.c |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff -puN drivers/serial/68360serial.c~msleep_interruptible-drivers_serial_68360serial drivers/serial/68360serial.c
--- linux-2.6.10-rc1/drivers/serial/68360serial.c~msleep_interruptible-drivers_serial_68360serial	2004-10-24 17:05:28.000000000 +0200
+++ linux-2.6.10-rc1-max/drivers/serial/68360serial.c	2004-10-24 17:05:28.000000000 +0200
@@ -1396,7 +1396,7 @@ static void end_break(ser_info_t *info)
  */
 static void send_break(ser_info_t *info, int duration)
 {
-	current->state = TASK_INTERRUPTIBLE;
+	set_current_state(TASK_INTERRUPTIBLE);
 #ifdef SERIAL_DEBUG_SEND_BREAK
 	printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
 #endif
@@ -1707,8 +1707,7 @@ static void rs_360_close(struct tty_stru
 	info->tty = 0;
 	if (info->blocked_open) {
 		if (info->close_delay) {
-			current->state = TASK_INTERRUPTIBLE;
-			schedule_timeout(info->close_delay);
+			msleep_interruptible(jiffies_to_msecs(info->close_delay));
 		}
 		wake_up_interruptible(&info->open_wait);
 	}
@@ -1761,9 +1760,8 @@ static void rs_360_wait_until_sent(struc
 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
 		printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
 #endif
-		current->state = TASK_INTERRUPTIBLE;
 /*		current->counter = 0;	 make us low-priority */
-		schedule_timeout(char_time);
+		msleep_interruptible(jiffies_to_msecs(char_time));
 		if (signal_pending(current))
 			break;
 		if (timeout && ((orig_jiffies + timeout) < jiffies))
_

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [patch 5/8]  serial/68360serial: replace  schedule_timeout() with msleep_interruptible()
  2004-10-30 22:47 [patch 5/8] serial/68360serial: replace schedule_timeout() with msleep_interruptible() janitor
@ 2004-11-01 12:35 ` Russell King
  0 siblings, 0 replies; 2+ messages in thread
From: Russell King @ 2004-11-01 12:35 UTC (permalink / raw)
  To: janitor; +Cc: akpm, linux-kernel, nacc

On Sun, Oct 31, 2004 at 12:47:12AM +0200, janitor@sternwelten.at wrote:
> Any comments would be appreciated.

Applied.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2004-11-01 12:43 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-10-30 22:47 [patch 5/8] serial/68360serial: replace schedule_timeout() with msleep_interruptible() janitor
2004-11-01 12:35 ` Russell King

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).