* [PATCH] computone: remove unnecessary files from drivers/char/ip2
@ 2004-12-16 22:41 james4765
0 siblings, 0 replies; 4+ messages in thread
From: james4765 @ 2004-12-16 22:41 UTC (permalink / raw)
To: linux-kernel; +Cc: akpm, james4765
SMTP: outgoing.verizon.net
From: james4765@verizon.net
To: linux-kernel@vger.kernel.org
CC: akpm@osdl.org
Subject: [PATCH] computone: remove unnecessary files from drivers/char/ip2
File: computone_unneeded_files_removal.header
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] computone: remove unnecessary files from drivers/char/ip2
2004-12-16 23:10 ` Adrian Bunk
@ 2004-12-16 23:44 ` Jim Nelson
0 siblings, 0 replies; 4+ messages in thread
From: Jim Nelson @ 2004-12-16 23:44 UTC (permalink / raw)
To: Adrian Bunk; +Cc: linux-kernel
Adrian Bunk wrote:
> On Thu, Dec 16, 2004 at 04:54:10PM -0600, james4765@verizon.net wrote:
>
>
>>Let me try that one again - this time with the right file (oops :)
>>
>>Remove a makefile and three programs from drivers/char/ip2 - they should not be in the kernel.
>>...
>
>
> Why did I think I've seen such a patch before? ;-)
>
> I sent the same patch some time ago and it's already in -mm.
>
> You better send patches against -mm which is already over 17 MB away
> from -rc3.
>
> cu
> Adrian
>
Okay. I thought I'd remembered seeing that patch a while ago, but couldn't be
sure. Guess it's time to go to the bleeding edge - start working off of -mm.
Thanks,
Jim
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] computone: remove unnecessary files from drivers/char/ip2
2004-12-16 22:54 james4765
@ 2004-12-16 23:10 ` Adrian Bunk
2004-12-16 23:44 ` Jim Nelson
0 siblings, 1 reply; 4+ messages in thread
From: Adrian Bunk @ 2004-12-16 23:10 UTC (permalink / raw)
To: james4765; +Cc: linux-kernel, akpm
On Thu, Dec 16, 2004 at 04:54:10PM -0600, james4765@verizon.net wrote:
> Let me try that one again - this time with the right file (oops :)
>
> Remove a makefile and three programs from drivers/char/ip2 - they should not be in the kernel.
>...
Why did I think I've seen such a patch before? ;-)
I sent the same patch some time ago and it's already in -mm.
You better send patches against -mm which is already over 17 MB away
from -rc3.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] computone: remove unnecessary files from drivers/char/ip2
@ 2004-12-16 22:54 james4765
2004-12-16 23:10 ` Adrian Bunk
0 siblings, 1 reply; 4+ messages in thread
From: james4765 @ 2004-12-16 22:54 UTC (permalink / raw)
To: linux-kernel; +Cc: akpm, james4765
Let me try that one again - this time with the right file (oops :)
Remove a makefile and three programs from drivers/char/ip2 - they should not be in the kernel.
Signed-off-by: James Nelson <james4765@gmail.com>
diff -urN --exclude='*~' linux-2.6.10-rc3-original/drivers/char/ip2/ip2mkdev.c linux-2.6.10-rc3/drivers/char/ip2/ip2mkdev.c
--- linux-2.6.10-rc3-original/drivers/char/ip2/ip2mkdev.c 2004-12-03 16:53:56.000000000 -0500
+++ linux-2.6.10-rc3/drivers/char/ip2/ip2mkdev.c 1969-12-31 19:00:00.000000000 -0500
@@ -1,123 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <linux/major.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdio.h>
-
-#include "ip2.h"
-#include "i2ellis.h"
-
-char nm[256];
-i2eBordStr Board[2];
-
-static void ex_details(i2eBordStrPtr);
-
-int main (int argc, char *argv[])
-{
- int board, box, port;
- int fd;
- int dev;
- i2eBordStrPtr pB = Board;
-
- // Remove all IP2 devices
-
- for ( board = 0; board < 4; ++board )
- {
- sprintf ( nm, "/dev/ip2ipl%d", board );
- unlink ( nm );
- sprintf ( nm, "/dev/ip2stat%d", board );
- unlink ( nm );
- }
-
- for ( port = 0; port < 256; ++port )
- {
- sprintf ( nm, "/dev/ttyF%d", port );
- unlink ( nm );
- sprintf ( nm, "/dev/cuf%d", port );
- unlink ( nm );
- }
-
- // Now create management devices, and use the status device to determine how
- // port devices need to exist, and then create them.
-
- for ( board = 0; board < 4; ++board )
- {
- printf("Board %d: ", board );
-
- sprintf ( nm, "/dev/ip2ipl%d", board );
- mknod ( nm, S_IFCHR|0666, (IP2_IPL_MAJOR << 8) | board * 4 );
- sprintf ( nm, "/dev/ip2stat%d", board );
- mknod ( nm, S_IFCHR|0666, (IP2_IPL_MAJOR << 8) | board * 4 + 1 );
-
- fd = open ( nm, O_RDONLY );
- if ( !fd )
- {
- printf ( "Unable to open status device %s\n", nm );
- exit ( 1 );
- }
- if ( ioctl ( fd, 65, Board ) < 0 )
- {
- printf ( "not present\n" );
- close ( fd );
- unlink ( nm );
- sprintf ( nm, "/dev/ip2ipl%d", board );
- unlink ( nm );
- }
- else
- {
- switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED )
- {
- case POR_ID_FIIEX: ex_details ( pB ); break;
- case POR_ID_II_4: printf ( "ISA-4" ); break;
- case POR_ID_II_8: printf ( "ISA-8 std" ); break;
- case POR_ID_II_8R: printf ( "ISA-8 RJ11" ); break;
-
- default:
- printf ( "Unknown board type, ID = %x", pB->i2ePom.e.porID );
- }
-
- for ( box = 0; box < ABS_MAX_BOXES; ++box )
- {
- for ( port = 0; port < ABS_BIGGEST_BOX; ++port )
- {
- if ( pB->i2eChannelMap[box] & ( 1 << port ) )
- {
- dev = port
- + box * ABS_BIGGEST_BOX
- + board * ABS_BIGGEST_BOX * ABS_MAX_BOXES;
-
- sprintf ( nm, "/dev/ttyF%d", dev );
- mknod ( nm, S_IFCHR|0666, (IP2_TTY_MAJOR << 8) | dev );
- sprintf ( nm, "/dev/cuf%d", dev );
- mknod ( nm, S_IFCHR|0666, (IP2_CALLOUT_MAJOR << 8) | dev );
-
- printf(".");
- }
- }
- }
- printf("\n");
- }
- }
-}
-
-static void ex_details ( i2eBordStrPtr pB )
-{
- int box;
- int i;
- int ports = 0;
- int boxes = 0;
-
- for( box = 0; box < ABS_MAX_BOXES; ++box )
- {
- if( pB->i2eChannelMap[box] != 0 ) ++boxes;
- for( i = 0; i < ABS_BIGGEST_BOX; ++i )
- {
- if( pB->i2eChannelMap[box] & 1<< i ) ++ports;
- }
- }
-
- printf("EX bx=%d pt=%d %d bit", boxes, ports, pB->i2eDataWidth16 ? 16 : 8 );
-}
-
-
diff -urN --exclude='*~' linux-2.6.10-rc3-original/drivers/char/ip2/ip2stat.c linux-2.6.10-rc3/drivers/char/ip2/ip2stat.c
--- linux-2.6.10-rc3-original/drivers/char/ip2/ip2stat.c 2004-12-03 16:53:20.000000000 -0500
+++ linux-2.6.10-rc3/drivers/char/ip2/ip2stat.c 1969-12-31 19:00:00.000000000 -0500
@@ -1,115 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Status display utility
-*
-*******************************************************************************/
-
-#include <sys/time.h>
-#include <sys/types.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <signal.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <linux/timer.h>
-#include <linux/termios.h>
-
-#include "i2ellis.h"
-#include "i2lib.h"
-
-i2eBordStr Board[2];
-i2ChanStr Port[2];
-
-struct driver_stats
-{
- ULONG ref_count;
- ULONG irq_counter;
- ULONG bh_counter;
-} Driver;
-
-char devname[20];
-
-int main (int argc, char *argv[])
-{
- int fd;
- int dev, i;
- i2eBordStrPtr pB = Board;
- i2ChanStrPtr pCh = Port;
-
- if ( argc != 2 )
- {
- printf ( "Usage: %s <port>\n", argv[0] );
- exit(1);
- }
- i = sscanf ( argv[1], "/dev/ttyF%d", &dev );
-
- if ( i != 1 ) exit(1);
-
- //printf("%s: board %d, port %d\n", argv[1], dev / 64, dev % 64 );
-
- sprintf ( devname, "/dev/ip2stat%d", dev / 64 );
- if( 0 > ( fd = open ( devname, O_RDONLY ) ) ) {
- // Conventional name failed - try devfs name
- sprintf ( devname, "/dev/ip2/stat%d", dev / 64 );
- if( 0 > ( fd = open ( devname, O_RDONLY ) ) ) {
- // Where is our board???
- printf( "Unable to open board %d to retrieve stats\n",
- dev / 64 );
- exit( 255 );
- }
- }
-
- ioctl ( fd, 64, &Driver );
- ioctl ( fd, 65, Board );
- ioctl ( fd, dev % 64, Port );
-
- printf ( "Driver statistics:-\n" );
- printf ( " Reference Count: %d\n", Driver.ref_count );
- printf ( " Interrupts to date: %ld\n", Driver.irq_counter );
- printf ( " Bottom half to date: %ld\n", Driver.bh_counter );
-
- printf ( "Board statistics(%d):-\n",dev/64 );
- printf ( "FIFO: remains = %d%s\n", pB->i2eFifoRemains,
- pB->i2eWaitingForEmptyFifo ? ", busy" : "" );
- printf ( "Mail: out mail = %02x\n", pB->i2eOutMailWaiting );
- printf ( " Input interrupts : %d\n", pB->i2eFifoInInts );
- printf ( " Output interrupts: %d\n", pB->i2eFifoOutInts );
- printf ( " Flow queued : %ld\n", pB->debugFlowQueued );
- printf ( " Bypass queued : %ld\n", pB->debugBypassQueued );
- printf ( " Inline queued : %ld\n", pB->debugInlineQueued );
- printf ( " Data queued : %ld\n", pB->debugDataQueued );
- printf ( " Flow packets : %ld\n", pB->debugFlowCount );
- printf ( " Bypass packets : %ld\n", pB->debugBypassCount );
- printf ( " Inline packets : %ld\n", pB->debugInlineCount );
- printf ( " Mail status : %x\n", pB->i2eStatus );
- printf ( " Output mail : %x\n", pB->i2eOutMailWaiting );
- printf ( " Fatal flag : %d\n", pB->i2eFatal );
-
- printf ( "Channel statistics(%s:%d):-\n",argv[1],dev%64 );
- printf ( "ibuf: stuff = %d strip = %d\n", pCh->Ibuf_stuff, pCh->Ibuf_strip );
- printf ( "obuf: stuff = %d strip = %d\n", pCh->Obuf_stuff, pCh->Obuf_strip );
- printf ( "pbuf: stuff = %d\n", pCh->Pbuf_stuff );
- printf ( "cbuf: stuff = %d strip = %d\n", pCh->Cbuf_stuff, pCh->Cbuf_strip );
- printf ( "infl: count = %d room = %d\n", pCh->infl.asof, pCh->infl.room );
- printf ( "outfl: count = %d room = %d\n", pCh->outfl.asof, pCh->outfl.room );
- printf ( "throttled = %d ",pCh->throttled);
- printf ( "bookmarks = %d ",pCh->bookMarks);
- printf ( "flush_flags = %x\n",pCh->flush_flags);
- printf ( "needs: ");
- if (pCh->channelNeeds & NEED_FLOW) printf("FLOW ");
- if (pCh->channelNeeds & NEED_INLINE) printf("INLINE ");
- if (pCh->channelNeeds & NEED_BYPASS) printf("BYPASS ");
- if (pCh->channelNeeds & NEED_CREDIT) printf("CREDIT ");
- printf ( "\n");
- printf ( "dss: in = %x, out = %x\n",pCh->dataSetIn,pCh->dataSetOut);
-
-}
diff -urN --exclude='*~' linux-2.6.10-rc3-original/drivers/char/ip2/ip2trace.c linux-2.6.10-rc3/drivers/char/ip2/ip2trace.c
--- linux-2.6.10-rc3-original/drivers/char/ip2/ip2trace.c 2004-12-03 16:54:15.000000000 -0500
+++ linux-2.6.10-rc3/drivers/char/ip2/ip2trace.c 1969-12-31 19:00:00.000000000 -0500
@@ -1,279 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Interpretive trace dump utility
-*
-*******************************************************************************/
-
-#include <sys/time.h>
-#include <sys/types.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <signal.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include "ip2trace.h"
-
-unsigned long namebuf[100];
-
-struct {
- int wrap,
- size,
- o_strip,
- o_stuff,
- strip,
- stuff;
- unsigned long buf[1000];
-} tbuf;
-
-struct sigaction act;
-
-typedef enum { kChar, kInt, kAddr, kHex } eFormat;
-
-int active = 1;
-void quit() { active = 0; }
-
-int main (int argc, char *argv[])
-{
- int fd = open ( "/dev/ip2trace", O_RDONLY );
- int cnt, i;
- unsigned long ts, td;
- struct timeval timeout;
- union ip2breadcrumb bc;
- eFormat fmt = kHex;
-
- if ( fd < 0 )
- {
- printf ( "Can't open device /dev/ip2trace\n" );
- exit ( 1 );
- }
-
- act.sa_handler = quit;
- /*act.sa_mask = 0;*/
- sigemptyset(&act.sa_mask);
- act.sa_flags = 0;
- act.sa_restorer = NULL;
-
- sigaction ( SIGTERM, &act, NULL );
-
- ioctl ( fd, 1, namebuf );
-
- printf ( "iiSendPendingMail %p\n", namebuf[0] );
- printf ( "i2InitChannels %p\n", namebuf[1] );
- printf ( "i2QueueNeeds %p\n", namebuf[2] );
- printf ( "i2QueueCommands %p\n", namebuf[3] );
- printf ( "i2GetStatus %p\n", namebuf[4] );
- printf ( "i2Input %p\n", namebuf[5] );
- printf ( "i2InputFlush %p\n", namebuf[6] );
- printf ( "i2Output %p\n", namebuf[7] );
- printf ( "i2FlushOutput %p\n", namebuf[8] );
- printf ( "i2DrainWakeup %p\n", namebuf[9] );
- printf ( "i2DrainOutput %p\n", namebuf[10] );
- printf ( "i2OutputFree %p\n", namebuf[11] );
- printf ( "i2StripFifo %p\n", namebuf[12] );
- printf ( "i2StuffFifoBypass %p\n", namebuf[13] );
- printf ( "i2StuffFifoFlow %p\n", namebuf[14] );
- printf ( "i2StuffFifoInline %p\n", namebuf[15] );
- printf ( "i2ServiceBoard %p\n", namebuf[16] );
- printf ( "serviceOutgoingFifo %p\n", namebuf[17] );
- printf ( "ip2_init %p\n", namebuf[18] );
- printf ( "ip2_init_board %p\n", namebuf[19] );
- printf ( "find_eisa_board %p\n", namebuf[20] );
- printf ( "set_irq %p\n", namebuf[21] );
- printf ( "ex_details %p\n", namebuf[22] );
- printf ( "ip2_interrupt %p\n", namebuf[23] );
- printf ( "ip2_poll %p\n", namebuf[24] );
- printf ( "service_all_boards %p\n", namebuf[25] );
- printf ( "do_input %p\n", namebuf[27] );
- printf ( "do_status %p\n", namebuf[26] );
- printf ( "open_sanity_check %p\n", namebuf[27] );
- printf ( "open_block_til_ready %p\n", namebuf[28] );
- printf ( "ip2_open %p\n", namebuf[29] );
- printf ( "ip2_close %p\n", namebuf[30] );
- printf ( "ip2_hangup %p\n", namebuf[31] );
- printf ( "ip2_write %p\n", namebuf[32] );
- printf ( "ip2_putchar %p\n", namebuf[33] );
- printf ( "ip2_flush_chars %p\n", namebuf[34] );
- printf ( "ip2_write_room %p\n", namebuf[35] );
- printf ( "ip2_chars_in_buf %p\n", namebuf[36] );
- printf ( "ip2_flush_buffer %p\n", namebuf[37] );
- //printf ( "ip2_wait_until_sent %p\n", namebuf[38] );
- printf ( "ip2_throttle %p\n", namebuf[39] );
- printf ( "ip2_unthrottle %p\n", namebuf[40] );
- printf ( "ip2_ioctl %p\n", namebuf[41] );
- printf ( "get_modem_info %p\n", namebuf[42] );
- printf ( "set_modem_info %p\n", namebuf[43] );
- printf ( "get_serial_info %p\n", namebuf[44] );
- printf ( "set_serial_info %p\n", namebuf[45] );
- printf ( "ip2_set_termios %p\n", namebuf[46] );
- printf ( "ip2_set_line_discipline %p\n", namebuf[47] );
- printf ( "set_line_characteristics %p\n", namebuf[48] );
-
- printf("\n-------------------------\n");
- printf("Start of trace\n");
-
- while ( active ) {
- cnt = read ( fd, &tbuf, sizeof tbuf );
-
- if ( cnt ) {
- if ( tbuf.wrap ) {
- printf ( "\nTrace buffer: wrap=%d, strip=%d, stuff=%d\n",
- tbuf.wrap, tbuf.strip, tbuf.stuff );
- }
- for ( i = 0, bc.value = 0; i < cnt; ++i ) {
- if ( !bc.hdr.codes ) {
- td = tbuf.buf[i] - ts;
- ts = tbuf.buf[i++];
- bc.value = tbuf.buf[i];
-
- printf ( "\n(%d) Port %3d ", ts, bc.hdr.port );
-
- fmt = kHex;
-
- switch ( bc.hdr.cat )
- {
- case ITRC_INIT:
- printf ( "Init %d: ", bc.hdr.label );
- break;
-
- case ITRC_OPEN:
- printf ( "Open %d: ", bc.hdr.label );
- break;
-
- case ITRC_CLOSE:
- printf ( "Close %d: ", bc.hdr.label );
- break;
-
- case ITRC_DRAIN:
- printf ( "Drain %d: ", bc.hdr.label );
- fmt = kInt;
- break;
-
- case ITRC_IOCTL:
- printf ( "Ioctl %d: ", bc.hdr.label );
- break;
-
- case ITRC_FLUSH:
- printf ( "Flush %d: ", bc.hdr.label );
- break;
-
- case ITRC_STATUS:
- printf ( "GetS %d: ", bc.hdr.label );
- break;
-
- case ITRC_HANGUP:
- printf ( "Hangup %d: ", bc.hdr.label );
- break;
-
- case ITRC_INTR:
- printf ( "*Intr %d: ", bc.hdr.label );
- break;
-
- case ITRC_SFLOW:
- printf ( "SFlow %d: ", bc.hdr.label );
- fmt = kInt;
- break;
-
- case ITRC_SBCMD:
- printf ( "Bypass CMD %d: ", bc.hdr.label );
- fmt = kInt;
- break;
-
- case ITRC_SICMD:
- printf ( "Inline CMD %d: ", bc.hdr.label );
- fmt = kInt;
- break;
-
- case ITRC_MODEM:
- printf ( "Modem %d: ", bc.hdr.label );
- break;
-
- case ITRC_INPUT:
- printf ( "Input %d: ", bc.hdr.label );
- break;
-
- case ITRC_OUTPUT:
- printf ( "Output %d: ", bc.hdr.label );
- fmt = kInt;
- break;
-
- case ITRC_PUTC:
- printf ( "Put char %d: ", bc.hdr.label );
- fmt = kChar;
- break;
-
- case ITRC_QUEUE:
- printf ( "Queue CMD %d: ", bc.hdr.label );
- fmt = kInt;
- break;
-
- case ITRC_STFLW:
- printf ( "Stat Flow %d: ", bc.hdr.label );
- fmt = kInt;
- break;
-
- case ITRC_SFIFO:
- printf ( "SFifo %d: ", bc.hdr.label );
- break;
-
- case ITRC_VERIFY:
- printf ( "Verfy %d: ", bc.hdr.label );
- fmt = kHex;
- break;
-
- case ITRC_WRITE:
- printf ( "Write %d: ", bc.hdr.label );
- fmt = kChar;
- break;
-
- case ITRC_ERROR:
- printf ( "ERROR %d: ", bc.hdr.label );
- fmt = kInt;
- break;
-
- default:
- printf ( "%08x ", tbuf.buf[i] );
- break;
- }
- }
- else
- {
- --bc.hdr.codes;
- switch ( fmt )
- {
- case kChar:
- printf ( "%c (0x%02x) ",
- isprint ( tbuf.buf[i] ) ? tbuf.buf[i] : '.', tbuf.buf[i] );
- break;
- case kInt:
- printf ( "%d ", tbuf.buf[i] );
- break;
-
- case kAddr:
- case kHex:
- printf ( "0x%x ", tbuf.buf[i] );
- break;
- }
- }
- }
- }
- fflush ( stdout );
- timeout.tv_sec = 0;
- timeout.tv_usec = 250;
- select ( 0, NULL, NULL, NULL, &timeout );
-
- }
- printf("\n-------------------------\n");
- printf("End of trace\n");
-
- close ( fd );
-}
-
diff -urN --exclude='*~' linux-2.6.10-rc3-original/drivers/char/ip2/Makefile linux-2.6.10-rc3/drivers/char/ip2/Makefile
--- linux-2.6.10-rc3-original/drivers/char/ip2/Makefile 2004-12-03 16:54:50.000000000 -0500
+++ linux-2.6.10-rc3/drivers/char/ip2/Makefile 1969-12-31 19:00:00.000000000 -0500
@@ -1,12 +0,0 @@
-
-all: ip2mkdev ip2trace ip2stat
-
-ip2mkdev: ip2mkdev.c
- cc -o ip2mkdev ip2mkdev.c
-
-ip2trace: ip2trace.c
- cc -o ip2trace ip2trace.c
-
-ip2stat: ip2stat.c
- cc -o ip2stat ip2stat.c
-
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-12-16 23:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-12-16 22:41 [PATCH] computone: remove unnecessary files from drivers/char/ip2 james4765
2004-12-16 22:54 james4765
2004-12-16 23:10 ` Adrian Bunk
2004-12-16 23:44 ` Jim Nelson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).