[PATCH] I2C support for Intel ICH7 - 2.6.10

[PATCH] I2C support for Intel ICH7 - 2.6.10

[Jason Gaston]

This patch adds the Intel ICH7 DID to the i2c-i801.c driver and adds an entry to Kconfig for I2C(SMBus) support.  
Note: This patch relies on the already submitted and accepted PATA patch to pci_ids.h containing all ICH7 DID's.
If acceptable, please apply. 

Thanks,

Jason Gaston


--- linux-2.6.10/drivers/i2c/busses/i2c-i801.c.orig	2004-12-30 05:58:04.000000000 -0800
+++ linux-2.6.10/drivers/i2c/busses/i2c-i801.c	2004-12-30 06:01:35.000000000 -0800
@@ -30,6 +30,7 @@
     82801EB		24D3   (HW PEC supported, 32 byte buffer not supported)
     6300ESB		25A4
     ICH6		266A
+    ICH7		27DA
     This driver supports several versions of Intel's I/O Controller Hubs (ICH).
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
@@ -596,6 +597,12 @@
 		.subvendor =	PCI_ANY_ID,
 		.subdevice =	PCI_ANY_ID,
 	},
+	{
+		.vendor =	PCI_VENDOR_ID_INTEL,
+		.device =	PCI_DEVICE_ID_INTEL_ICH7_17,
+		.subvendor =	PCI_ANY_ID,
+		.subdevice =	PCI_ANY_ID,
+	},
 	{ 0, }
 };
 
--- linux-2.6.10/drivers/i2c/busses/Kconfig.orig	2004-12-30 06:02:04.000000000 -0800
+++ linux-2.6.10/drivers/i2c/busses/Kconfig	2004-12-30 06:02:39.000000000 -0800
@@ -112,6 +112,7 @@
 	    82801EB
 	    6300ESB
 	    ICH6
+	    ICH7
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

Re: [PATCH] I2C support for Intel ICH7 - 2.6.10

[Greg KH]

On Thu, Dec 30, 2004 at 10:24:39AM -0800, Jason Gaston wrote:
> This patch adds the Intel ICH7 DID to the i2c-i801.c driver and adds
> an entry to Kconfig for I2C(SMBus) support. ?
> Note: This patch relies on the already submitted and accepted PATA
> patch to pci_ids.h containing all ICH7 DID's.

Did I already apply this patch?

> If acceptable, please apply. 

I need a "Signed-off-by:" line to be able to apply it.  See
Documentation/SubmittingPatches for more info.

Care to resend it?

thanks,

greg k-h