* Linux 2.6.11-rc1
@ 2005-01-12 5:09 Linus Torvalds
2005-01-12 7:07 ` Keith Owens
` (8 more replies)
0 siblings, 9 replies; 44+ messages in thread
From: Linus Torvalds @ 2005-01-12 5:09 UTC (permalink / raw)
To: Kernel Mailing List
Ok, the big merges after 2.6.10 are hopefully over, and 2.6.11-rc1 is out
there.
Lots of small cleanups, although that inevitable qlogic firmware update
makes pretty much _everything_ look small in comparison.
SCSI, USB, IDE, x86-64, FRV, PPC64, ARM, input layer, ALSA, network
drivers, pcmcia, knfsd, ACPI, sparse cleanups... You name it. Lots of
(mostly) small updates all over the landscape.
What gets hidden in the noise of all the updates is things like the
conversion to 4-level page tables by Andi Kleen and Nick Piggin. That
makes us able to use the full virtual memory space on 64-bit
architectures. The patches may not be very large, and in fact it was
interesting to see just how smoothly it seems to integrate.
Linus
----
Summary of changes from v2.6.10 to v2.6.11-rc1
============================================
Adrian Bunk:
o net/wan/n2.c: remove an unused function
o bonding: remove an unused function
o net/3c505.c: remove unused functions
o net/skfp/smt.c: remove an unused function
o kill scsi_syms.c
o SCSI aic7xxx_old.c: make a function static
o remove bouncing email address of Deanna Bonds
o MTD: Use select in Kconfig where appropriate
o [CRYPTO]: Make some code static
o i386 mca.c: small cleanups
o select HOTPLUG
o PCI: arch/i386/pci/: make some code static
o PCI Hotplug: drivers/pci/hotplug/ : simply use MODULE
o SCSI ibmmca.c: make a struct static
o SCSI mca_53c9x.c: make 2 functions static
o SCSI NCR53C9x.c: some cleanups
o drivers/char/hw_random.c: make a variable static
o [SUNRPC]: Remove unused file
net/sunrpc/auth_gss/gss_pseudoflavors.c
o [SUNRPC]: Remove unused file net/sunrpc/svcauth_des.c
o [SUNRPC]: Remove unused file net/sunrpc/auth_gss/sunrpcgss_syms.c
o [APPLETALK]: Make some code static
o [AX25]: Staticize functions, and remove unused global function
o [NET]: No need to export sock_readv_writev
o [SUNRPC]: Staticize, kill unused functions, and remove unneeded
exports
o [AF_UNIX]: Mark needlessly global code static
o [X25]: Staticize, and remove unused global functions
o [XFRM]: Staticize, and remove unused global functions
o [NET]: Mark eth_header_parse static
o [AF_NET]: Mark pfkey_table static
o [NETLINK]: Staticize and remove unused functions
o [AF_PACKET]: Make needlessly global code static
o [IPVS]: Make needlessly global code static
o [IPX]: Make needlessly global code static
o [IPV4]: Staticize and remove unneeded exports
o [IRDA]: Staticize and remove unnecessary exports
o [LLC]: Staticize and remove unnecessary functions and exports
o [NETROM]: Make needlessly global code static
o [ROSE]: Staticize and remove unused global functions
o [RXRPC]: Staticize and remove unused globals and exports
o [PKT_SCHED]: Staticize and other cleanups
o [IPVS]: Remove subscribers-only mailing list from MAINTAINERS
o kill blk.h
o compile with -ffreestanding
o remove ip2 programs
o fix MTD_BLOCK2MTD dependency
o OSS via82cxxx_audio.c: remove unused CONFIG_SOUND_VIA82CXXX_PROCFS
code
o small drivers/char/rio/ cleanups
o small char/generic_serial.c cleanup
o DEBUG_BUGVERBOSE for i386
o telephony/ixj.c cleanup
o char/cyclades.c: remove unused code
o small ftape cleanups
o reiser3 cleanups
o cdrom.c: make several functions static (fwd)
o fs/coda/psdev.c shouldn't include lp.h
o lockd: fix two struct definitions
o small MCA cleanups
o small drivers/media/radio/ cleanups
o DRM: remove unused functions
o floppy.c: remove an unused function
o media/video/ir-kbd-i2c.c: remove an unused function
o NFS: remove an unused function
o watchdog/machzwd.c: remove unused functions
o video drivers: remove unused functions
o ISDN b1pcmcia.c: remove an unused variable
o binfmt_script.c: make struct script_format static
o bio.c: make bio_destructor static
o devpts/inode.c: make one struct static
o small proc_fs cleanups
o mark QNX4FS_RW as BROKEN
o OSS: remove unused functions
o DVB av7110_hw.c: remove unused functions
o sched.c: remove an unused macro
o scsi/ahci.c: remove an unused function
o scsi/aic7xxx/aic79xx_osm.c: remove an unused function
o sched.c: remove an unused function
o prism54: small prismcompat cleanup
o some parport_pc.c cleanups
o cris: remove kernel 2.0 #ifdef's
o AFS: afs_voltypes isn't always required
o befs: #if 0 two unused global functions
o remove unused include/asm-m68k/adb_mouse.h
o scsi/aic7xxx/: remove two useless variables
o remove IN_STRING_C
o bttv-driver.c: make some variables static
o init/initramfs.c: make unpack_to_rootfs static
o OSS: misc cleanups
o quota: make some code static
o Remove InterMezzo MAINTAINERS entry
o remove umsdos from tree
o drivers/char/: misc cleanups
o smbfs: make some functions static
o efs: make a struct static (fwd)
o ext3 cleanups
o fs/ext2/xattr.c: make ext2_xattr_list static
o fs/hugetlbfs/inode.c: make 4 functions static
o remove outdated smbfs ChangeLog
Akinobu Mita:
o seclvl: add missing dependency
Al Borchers:
o USB: serial driver for TI USB 3410/5052 chips (3/3)
o USB: serial driver for TI USB 3410/5052 chips (1/3)
o USB: serial driver for TI USB 3410/5052 chips (2/3)
Alan Cox:
o i810 more AC97 tunings
o make microcode text less confusing
o Paul Laufer CREDITS address update
o quiet scsi ioctls warnings
o Early ALI watchdog support
o [ide] serverworks: add support for CSB6 RAID
o [ide] it8172: incorrect return from it8172_init_one()
o [ide] fix return codes in the generic PCI IDE driver
o Resurrect ISICOM serial
o First cut at setsid/tty locking
o ULi support for 526X tulip variants
o SDLA firmware upgrade should require CAP_SYS_RAWIO (not just
CAP_NET_ADMIN)
o IDE CD is very noisy
Alan Stern:
o USB: dummy_hcd: update to match the new endpoint changes
o USB: Create usb_hcd structures within usbcore [1/13]
o USB: Create usb_hcd structures within usbcore [2/13]
o USB: Create usb_hcd structures within usbcore [3/13]
o USB: Create usb_hcd structures within usbcore [4/13]
o USB: Create usb_hcd structures within usbcore [5/13]
o USB: Create usb_hcd structures within usbcore [6/13]
o USB: Hub driver: several bug fixes and simplifications [11/13]
o USB: Hub driver cleanups [12/13]
o USB: Another hub driver cleanup [13/13]
Albert Lee:
o [libata] use PIO mode for request sense
o [libata] PIO error handling improvement
o [libata] verify ATAPI DMA for a given request is OK
Alex Tomas:
o ext3: support for EA in inode
Alex Williamson:
o collect page_states only from online cpus
Alexander Kern:
o new PCI_ID for tulip
Alexander Nyberg:
o Off by one in drivers/parport/probe.c
Alexander Viro:
o iomem annotations in r8169
o ac3200 iomem annotations and fixes
o ne3210 iomem annotations
o starfire iomem annotations
o killed isa_... in 3c507
o depca iomem annotations
o 3c359 iomem annotations
o e2100 iomem annotations and fixes
o (25/32) lanstreamer iomem annotations
o netdev_priv() in arlan
o netdev_priv() in netwave_cs
o arlan iomem annotations and cleanups
o netwave iomem annotations
o net/pcmcia iomem annotations
o via-rhine iomem annotations, switch to io{read,write}
o sundance iomem annotations, switch to io{read,write}
o olympic_open() cleanup and fixes
o skfp iomem annotations, switch to io{read,write}
o lne390 iomem annotations and fixes
o wavelan_cs iomem annotations
o airo iomem annotations
o mace iomem annotations - trivial part
o affs headers cleanup
o zatm fix
o mxser annotations and compile fixes
o cinergy __user annotations
o x86_64 io.h annotations
o ppc io.h annotations
o hotplug NULL noise removal
o more isa-ectomy
o tda80xx.c portability fix
o dib3000 portability fix
o av7110_hw __user annotations fix
o ppc __iomem annotations - ->cfg_data
o ppc __iomem annotations - gg2
o ppc __iomem annotations - openpic
o ppc __iomem annotations - ->cfg_addr
o i386 uaccess annotations
o ppc uaccess annotations
o pc300 portability fixes
o diskonchip missing iomem annotations
o Fix megaraid oops on unload
o Fix up compiler inefficiencies
o dmi_iterate() fix
Ananth N. Mavinakayanahalli:
o ppc64: kprobes implementation
o Kprobes: wrapper to define jprobe.entry
Andi Kleen:
o split copy_page_range
o convert Linux to 4-level page tables
o convert i386 to generic nopud header
o convert x86_64 to 4 level page tables
o x86_64: Add a real pfn_valid
o x86_64: Fix bugs in the AMD K8 CMP support code
o x86_64: Reenable MGA DRI on x86-64
o x86_64: Remove duplicated FAKE_STACK_FRAME macro
o x86_64: Remove BIOS reboot code
o x86_64: Add reboot=force
o x86_64: Collected ioremap fixes
o x86_64: Handle NX correctly in pageattr
o x86_64: Split ACPI boot table parsing
o x86_64: Add SRAT NUMA discovery to x86-64
o x86_64: Update uptime after suspend
o x86_64: Allow a kernel debugger to hide single steps in more cases
o x86_64: Remove debug information for vsyscalls
o x86_64: Rename HTVALID to CMP_LEGACY
o x86_64: Scheduler support for AMD CMP
o x86_64: Add a missing __iomem pointed out by Linus
o x86_64: Add a missing newline in /proc/cpuinfo
o x86_64: Always print segfaults for init
o x86_64: Export phys_proc_id
o x86_64: Allow to configure more CPUs and nodes
o x86_64: Fix a warning in the CMP support code for !CONFIG_NUMA
o x86_64: Fix some outdated assumptions that CPU numbers are equal
numbers
o x86_64: Remove unneeded ifdef in hardirq.h
o x86_64: Add SLIT (inter node distance) information to sysfs
o x86_64: Add x86_64 support for Jack Steiner's SLIT sysfs patch
o x86_64: Eliminate some useless printks in ACPI numa.c
o Sync in core time granuality with filesystems
o Fix ADMtek Comet on x86-64
o Fix gcc 4 compilation in ACPI
o Fix gcc 4 compilation in DRM
o Fix gcc 4 compilation in drivers/eisa
o Fix gcc 4 compilation in bttv
o x86_64: Work around another aperture BIOS bug on Opteron
o x86_64: Hack to disable clustered mode on AMD systems
o x86_64: Updates for x86-64 boot-options.txt
o x86_64: Update defconfig
o x86_64: Remove old-checksum.c
o x86_64: Fix sparse warnings
o x86_64: Fix some gcc 4 warnings in arch/x86_64
o i386: Port missing cpuid bits from x86-64 to i386
o i386: AMD dual core support for i386
o i386: Count both multi cores and SMP siblings in /proc/cpuinfo
siblings
o i386: Export phys_proc_id
o x86_64: Move memset_io out of line to avoid warnings
o x86_64: Fix ioremap attribute restoration on i386 and x86-64
o x86_64: Fix TLB reporting on K8
o x86_64: change_page_attr logic fixes from Andrea
o x86_64: Fix mptables printk
o x86_64: Add new key syscalls
o x86_64: Remove direct mem_map references
o x86_64: Remove check that limited max number of IO-APIC to 8
o x86_64: Prevent gcc from generating MMX code by mistake
o x86_64: Don't sync APIC ARBs on P4s
o x86_64: Cleanups preparing for memory hotplug
o x86_64: Remove unused prototypes
o x86_64: Fix a lot of broken white space in
arch/x86_64/kernel/setup.c
o x86_64: Fix signal FPU leak on i386 and x86-64
o x86_64: Disable conforming bit on USER32_CS segment
Andrea Arcangeli:
o mempolicy optimisation
Andreas Gruenbacher:
o Ext[23]: apply umask to symlinks with ACLs configured out
Andrew Hendry:
o [X25]: When receiving a call, check listening sockets for matching
call user data
o [X25]: Remove unused header files
Andrew Morton:
o r8169 module_param build fix
o iscsi_transport build fix
o setup_pci.c build fix
o sparc64 pmd_offset() fix
o ia64 PTRS_PER_PGD build fix
o fix inet6_sk for non IPV6 builds again
o floppy build fix
o vmscan: total_scanned fix
o do_anonymous_page() use SetPageReferenced
o swsusp-try_to_freeze-to-make-freezing-hooks-nicer fix
o bk-kbuild-in_gate_area_no_task-warning-fix
o suppress might_sleep() if oopsing
o Reduce i_sem usage during file sync operations
o get_blkdev_list() cleanup
o msync(): set PF_SYNCWRITE
o __GFP_ZERO pktcdvd fix
o mmc build fix
o debugfs-typo-fix
o via-rhine warning fix
o xircom_tulip_cb.c build fix
o cs416x: use upcase in config
o block2mtd: avoid touching truncate_count
o readpage-vs-invalidate fix
o invalidate_inode_pages2() mmap coherency fix
o remove early_param test code
o MODULE_PARM conversions
o MODULE_PARM conversions
o Fix ppc64 !HOTPLUG_CPU build
o uninline __do_page_cache_readahead()
o acpi_smp_processor_id() warning fix
Andrew Theurer:
o sched: more agressive wake_idle()
o sched: can_migrate exception for idle cpus
o sched: newidle fix
Andrew Vasquez:
o qla2xxx: Tx/Rx Sensitivity additions
o qla2xxx: NVRAM updates
o qla2xxx: NVRAM id-list updates
o qla2xxx: Small fixes
o qla2xxx: ISR fixes
o qla2xxx: Code scrubbing
o qla2xxx: Consolidate ISP63xx support
o qla2xxx: 23xx/63xx firmware updates
o qla2xxx: Update driver version
o ipr: PCI-X capabilities setup fix
Andries E. Brouwer:
o mm: overcommit updates
o remove duplicated patch fragment
o remove NR_SUPER define
Anton Blanchard:
o ppc64: limit xmon dump length
o ppc64: catch bad xmon read/write SPR commands
o ppc64: Clarify rtasd printk
o ppc64: fix some compiler warnings
o ppc64: remove stale prom.h code
o sched: reset cache_hot_time
o update hugetlb documentation
o ppc64: kprobes breaks BUG() handling
o ppc64: Fix NUMA build
o ppc64: enhance oops printing
o ppc64: fix xmon longjmp handling
o ppc64: make xmon print BUG() warnings
o ppc64: xtime <-> gettimeofday can get out of sync
o ppc64: PCI cleanup
o ppc64: Remove flush_instruction_cache
o ppc64: interrupt code cleanup
o ppc64: Fix rtas_set_indicator(9005)
o ppc64: reduce paca[] where possible
Antonino Daplas:
o fbdev: Cleanup i2c code of rivafb
o fbdev: Revive BIOS-less booting for Rage XL cards
o fbdev: Revive global_mode_option
o fbcon/fbdev: Add blanking notification
o fbdev: Check return value of fb_add_videomode
o fbdev: Do a symbol_put for each symbol_get in savagefb
o fbdev: Add Viewsonic PF775a to broken display database
o fbdev: Fix default timings in vga16fb
o fbdev: Reduce stack usage of intelfb
Arjan van de Ven:
o ray_cs export cleanup
o drivers/acpi/ibm_acpi.o .init.text refers to .exit.text
Arnaldo Carvalho de Melo:
o fix platform_rename_gsi related ia32 build breakage
o [XFRM]: Export xfrm_policy_delete()
o [INET] move inet_sock into inet_opt and rename it to inet_sock
o [TCP] merge tcp_sock with tcp_opt
o Fix net/core/sock.o build failure
Art Haas:
o kbuild: Trivial Makefile patch
Artem Bityuckiy:
o JFFS2: Include vmalloc.h to fix compile warning
o JFFS2: jffs2_get_inode_nodes(): Remove gratuitous memset on new
nodes
o MTD NAND flash simulator update
Arthur Othieno:
o ppc32: Resurrect Documentation/powerpc/cpu_features.txt
o arch/alpha/Kconfig: Kill stale reference to Documentation/smp.tex
Badari Pulavarty:
o x86_64: numa_add_cpu() fix
Barry K. Nathan:
o swsusp: device power management fix
o swsusp: properly suspend and resume all devices
Bart De Schuymer:
o [EBTABLES]: Add userspace logging via netlink socket
Bartlomiej Zolnierkiewicz:
o [ide] add "ide=nodma" to documentation
o [ide] ide-proc: kill destroy_proc_ide_interfaces()
o [ide] fix cleanup_module() in ide.c
o [ide] propagation of error code in PCI IDE setup
o [ide] clean up error path in do_ide_setup_pci_device()
o [ide] propagate the error status in
ide_pci_enable/ide_setup_pci_controller
o [ide] make host drivers aware of the changes made to
ide_setup_pci_device{s}
o [ide] remove pci_disable_device() calls from setup-pci.c and
sgiioc4.c
o [ide] remove CRD-8480C from the DMA blacklist
o [ide] disable debug in IDE ppc/pmac driver
o [ide] kill write-only ide_driver_t->sense
o [ide] add ide_dump_opcode()
o [ide] cleanup ide_dump_status()
o [ide] cleanup ide_error()
o [ide] rework ide_driver_t->error
o [ide] ide_driver_t->abort() cleanup
o [ide] kill current_capacity()
Ben Dooks:
o [ARM PATCH] 2343/1: S3C2410 / S3C2440 MAINTAINERS entries
o [ARM PATCH] 2344/1: S3C2440 - fix mapping of watchdog for reboot
o [ARM PATCH] 2345/1: S3C24XX - serial init depending on cpu detected
o [ARM PATCH] 2372/1: S3C2410 - remove s3c2410_clock_tick_rate
o [ARM PATCH] 2373/1: S3C2410 - fix possible loop in irq macro
o [ARM PATCH] 2374/1: S3C2410 - remove unused code from entry-macro.S
Bernard Blackham:
o sched: fix scheduling latencies in mttr.c
Bill Rugolsky:
o NFS client O_DIRECT error case fix
Bjorn Helgaas:
o Input: Add ACPI-based i8042 keyboard and aux controller
enumeration; can be disabled by passing i8042.noacpi as a boot
parameter.
o ia64: remove HCDP support for early printk
o use modern format for PCI->APIC IRQ transform printks
Bodo Stroesser:
o uml: unregister signal handlers at reboot
o uml: small vsyscall fixes
o uml: export end_iomem
o uml: Fix setting of TIF_SIGPENDING
o uml: Allow vsyscall code to build on 2.4
o uml: SYSEMU fixes
o uml: correctly restore extramask in sigreturn
o uml: fix update_process_times call
o uml: detect SYSEMU_SINGLESTEP
o UML: Don't use __NR_waitpid on arches which don't have it
o UML: Use va_copy
Brent Casavant:
o alloc_large_system_hash: NUMA interleaving
o filesystem hashes: NUMA interleaving
o TCP hashes: NUMA interleaving
Brian King:
o ipr: Allow Query Resource State adapter command to
o ipr: new RAID error
o ipr: Remove dead code
o ipr: whitespace fixes
o ipr: Bump driver version to 2.0.12
Carsten Otte:
o s390: DCSS driver cleanup fix
Catalin Boie:
o [PKT_SCHED]: Allow using nfmark as key in U32 classifier
Catalin Marinas:
o [ARM PATCH] 2322/1: Enable ARM922T configuration option for
Integrator
Chas Williams:
o [ATM]: small atm cleanups (from Adrian Bunk <bunk@stusta.de>)
Chris Mason:
o __getblk_slow can loop forever when pages are partially mapped
Chris Wedgwood:
o sn2 trivial nodemask.h include fix
Chris Wright:
o sysfs: Allocate sysfs_dirent structures from their own slab
o track capabilities in default dummy security module code
o fix up dummy security module code merge
o binfmt_script.c: make em86_format static
o remove duplicate rlim assignment in acct_stack_growth()
o acct_stack_growth nitpicks
Christoph Hellwig:
o unexport ei_tx_timeout
o [NET]: Kill drivers/net/net_init.c
o [NET]: Use local_softirq_pending instead of softirq_pending in
netif_rx_ni
o feed eata.c through Lindent
o convert eata to pass pointers around
o qla2xxx: Dead code removal
o move irq_enter and irq_exit to common code
o remove unused irq_cpustat fields
o udf: simplify udf_iget, fix race
o udf: fix reservation discarding
o remove dead ext3_put_inode prototype
o ppc64: export ppc64_caches for afs/ntfs
o fix double iget in romfs_fill_super
o Direct write vs truncate deadlock
o cleanup virtual console <-> selection.c interface
o warn about cli, sti & co uses even on UP
o fix ->setattr ATTR_SIZE locking for nfsd
Christoph Lameter:
o Make page allocator aware of requests for zeroed memory
Con Kolivas:
o net: Netconsole poll support for 3c509
o sched.c whitespace mangler
o sched: alter_kthread_prio
o sched: adjust_timeslice_granularity
o sched: add_requeue_task
o sched: requeue_granularity
o sched: remove_interactive_credit
Corey Minyard:
o PPC debug setcontext syscall implementation
o Cleanups for the IPMI driver
Cornelia Huck:
o s390: Common I/O layer
Coywolf Qi Hunt:
o remove redundant sys_delete_module()
Daniele Venzano:
o Add Altimata PHY to sis900 driver
o convert sis900 to new style parameters
Dave Airlie:
o drm: initial core move infrastructure change
o drm: device minor fixups and /proc fixups
o drm: core/personality split for 2.6 kernel
o drm: drm_memory.c missing from build
o drm: rename fn_tbl to driver as it is no longer a function table
o drm: make pcigart functions inline
o drm: fix warning for missing vunmap
o drm: remove use of drm_agp use agp backend directly
o drm: move the enable device before filling in device info
o Make 1-bit fields be unsigned (no sign bit :)
o drm: core changes broke i810/830
o drm: mark ffb as broken because it actually is
Dave Boutcher:
o ibmvscsi: replace schedule_timeout() with msleep()
Dave Hansen:
o kill off highmem_start_page
o make sure ioremap only tests valid addresses
o remove pfn_to_pgdat() on x86
o kill off highmem_start_page
Dave Jiang:
o [ARM PATCH] 2352/1: Increase amount of physical memory addressable
on IOP platforms
o [ARM PATCH] 2355/1: cleanup of PCI defines for IOP33x platforms
o [ARM PATCH] 2356/1: cleanup for compliance of machine ID and ATAG
for IOP platforms
o [ARM PATCH] 2361/1: clean up irq handling code for IOP33x platforms
o [ARM PATCH] 2362/1: cleanup of PCI defines for IOP321 platforms
o [ARM PATCH] 2363/1: IQ80332 platform port
Dave Jones:
o [AGPGART] amd64-agp.c replace pci_find_device with pci_get_device
As pci_find_device is going away soon I have converted this file to
use pci_get_device instead. I have compile tested it.
o [AGPGART] generic.c: replace pci_find_device with pci_get_device
o [AGPGART] intel-agp.c: replace pci_find_device with pci_get_device
o [AGPGART] intel-mch-agp.c: replace pci_find_device with
pci_get_device
o [AGPGART] isoch.c: replace pci_find_device with pci_get_device
o [AGPGART] Simplify global_cache_flush
o [AGPGART] Add support for ALI M1681/M1683
o [AGPGART] Fix TLB flushing issues with change_page_attr()
o [AGPGART] Fix up PCI posting bugs
o [AGPGART] More PCI Posting bugs
o [AGPGART] Another missing PCI Posting bugfix
o [AGPGART] Remove unnecessary parenthesis on return statements
o [AGPGART] Add missing cache flush to the generic remove routine
o [AGPGART] Announce Intel 460GX when found
o [AGPGART] Fix masking (causes crash on 460GX)
o [AGPGART] Fix up two stupid bugs in the posting fixes
o driver core: Fix up vesafb failure probing
o [AGPGART] ULI M1689 support
o [AGPGART] Fix agp=off
Dave Kleikamp:
o JFS: fix race in jfs_commit_inode
o JFS: add security and trusted xattrs
o JFS: speed up nointegrity mount
o JFS: flush new iag from bd_inode's mapping
David Brownell:
o USB: update drivers/usb/README
o USB: usb_dev->ep[] not usb_dev->epmaxpacket (1/15)
o USB: usbcore changes for usb_dev->ep[](2/15)
o USB: usbfs changes for usb_dev->ep[] (3/15)
o USB: ALSA and usb_dev->ep[] (4/15)
o USB: auerswald and usb_dev->ep[] (5/15)
o USB: CRIS HCD and usb_dev->epmaxpacket (6/15)
o USB: EHCI HCD and usb_dev->epmaxpacket (7/15)
o USB: usbtest and usb_dev->epmaxpacket (8/15)
o USB: HCD/usb_bus interface cleanup (9/15)
o USB: remove some now-unused HCD infrastructure (10/15)
o USB: maintain usb_host_endpoint.urb_list (11/15)
o USB: EHCI and HCD API updates (12/15)
o USB: OHCI and HCD API changes (13/15)
o USB: UHCI and HCD API change (14/15)
o USB: better messages for "no-IRQ" cases (15/15)
o USB: HCDs and per-device state (16/15)
o USB: EHCI "park" mode disabled
o USB: EHCI periodic schedule tree
o USB: gadget kconfig doc updates
o USB: Hub driver: improve error checking and retries [10/13]
o USB: ohci build tweaks
o USB: fix Scheduling while atomic warning when resuming
o I2C: minor isp1301_omap tweaks
o USB: fix serial gadget oops during enumeration
o Driver Core: handle bridged platform bus segments
o USB: minor usb doc/comment fixes
o USB: definitions for USB2 debug device, debug port
o USB: usb makefile tweaks
o USB: ohci diagnostic tweak
o USB: ehci "hc died" on startup (chip bug workaround)
o fbdev: rivafb should recognize NF2/IGP
David Dillow:
o net/typhoon.c: use previously-unused function
David Gibson:
o ppc64: tweaks to ppc64 cpu sysfs information
o ppc64: add performance monitor register information to processor.h
o ppc64: hugepage bugfix
o ppc64: rename perf counter register #defines
David Howells:
o PCI: Make pci_set_power_state() check register version
o Termio userspace access error handling
o IDE_ARCH_OBSOLETE_INIT fix
o out-of-line implementation of find_next_bit()
o GP-REL data support
o frv: add initdata variable spec in a header file
o VM routine fixes
o FRV: Fujitsu FR-V CPU arch maintainer record
o FRV: Fujitsu FR-V arch documentation
o FRV: Fujitsu FR-V CPU arch implementation part 1
o FRV: Fujitsu FR-V CPU arch implementation part 2
o FRV: Fujitsu FR-V CPU arch implementation part 3
o FRV: Fujitsu FR-V CPU arch implementation part 4
o FRV: Fujitsu FR-V CPU arch implementation part 5
o FRV: Fujitsu FR-V CPU arch implementation part 6
o FRV: Fujitsu FR-V CPU arch implementation part 7
o FRV: Fujitsu FR-V CPU arch implementation part 8
o FRV: Fujitsu FR-V CPU arch implementation part 9
o Put memory in DMA zone not Normal zone in FRV arch
o FRV: First batch of Fujitsu FR-V arch include files
o frv: emove obsolete hardirq stuff from includes
o frv: PCI DMA fixes
o frv: Fix PCI config space write
o FRV: More Fujitsu FR-V arch include files
o FRV: Yet more Fujitsu FR-V arch include files
o FRV: Remaining Fujitsu FR-V arch include files
o FRV: Make calibrate_delay() optional
o FRV: procfs changes for nommu changes
o FRV: change setup_arg_pages() to take stack pointer
o Fix usage of setup_arg_pages() in IA64, MIPS, S390 and Sparc64
o FRV: Add FDPIC ELF binary format driver
o Fix some ELF-FDPIC binfmt problems
o Further nommu changes
o Further nommu /proc changes
o frv: nommu changes
o Make more syscalls available for the FR-V arch
o FRV: debugging fixes
o frv: Minix & ext2 bitops fixes
o frv: perfctr_info syscall
o frv: update the trap tables comment
o frv: accidental TLB entry write-protect fix
o FRV: pagetable handling fixes
o FRV: FR55x CPU support fixes
o FRV: Change PML4 -> PUD
o Implement nommu find_vma()
o Fix nommu MAP_SHARED handling
o Permit nommu MAP_SHARED of memory backed files
o Cross-reference nommu VMAs with mappings
o FRV: vperfctr syscalls don't exist in -bk8
o FRV: remove excess argument passed to expand_stack()
o FRV: provide stub asm/a.out.h
o Make pud_alloc() and pmd_alloc() non-existant on !MMU
o FRV: Update banner comments at the top of frv arch files
David Marlin:
o JFFS2: Fix freeing of block table on mount failure
David McCullough:
o FRV: Better mmap support in uClinux
David Mosberger:
o [IA64] contig.c: fix bug in DMA-zone initialization
o [IA64] Fix swiotlb some more
David S. Miller:
o eepro100.c iomap conversion
o [IPV4]: FIB cleanup, rtmsg_fib()
o [IRDA]: More staticization becomes possible in ircomm_ttp.c
o [SPARC64]: Fix typo in previous change, s/IS_SOCK/S_ISSOCK/
o [LLC]: llc_sap_list_lock really does need to be exported
o [SPARC64]: Include infiniband driver config and update defconfig
o [SPARC64]: We really do need to mask the start/end args to
flush_tlb_pgtables()
o [TG3]: Return 0 when PHY read times out, not all-ones
o [TG3]: Fix signedness issues in PHY read/write loops
o [TG3]: Update driver version and reldate
David Vrabel:
o MTD: Fix chip ident definition for AMD 29F002T devices
o MTD: AMD/Fujitsu flash driver cleanup
o [ARM PATCH] 2323/1: Expand IXP4XX_WATCHDOG config help text
David Woodhouse:
o JFFS2: Add support for bizarre NOR flash with ECC
o MTD: Provide XIP support for Intel flash chips
o MTD: NAND driver updates
o JFFS2: Move very noisy debugging messages from level 1 to level 2
o JFFS2: Add notes on inocache_lock spinlock to README.Locking
o Email address update
o JFFS2: Remove definition of obsolete struct jffs2_scan_info
o MTD: Fix JEDEC probe of chips which don't require unlock sequence
o JFFS2: Remove obsolete structure definitions and update comments
o JFFS2: Discard dirents which point to non-existent inodes
o JFFS2: Fix memory leak if jffs2_scan_medium() fails
o JFFS2: Fix race on read access to NAND write-buffer
o MTD NOR chip drivers: use msleep()
o MTD: Use msleep() in cfi_udelay() helper function
o MTD: Fix RedBoot FIS table detection
o MTD: mtdpart_setup() is used from platform code. Remove 'static'
o MTD: Make phram work again
o MTD: Fix oops on erase in NFTL/INFTL (again)
o MTD: Fix timing setup for NAND flash on Samsung S3C2410
o MTD: Support NOR and NAND flash on Sharp SL Series PDAs
o MTD: NAND flash simulator
o JFFS2: Fix oops in read_inode
o JFFS2: Various fixes for recent RAM use reduction
o JFFS2: Initialise bad_count for each eraseblock correctly
o JFFS2: Split eraseblock refiling into separate function
o JFFS2: Allow NAND driver to disable virtual eraseblocks
o rslib: Spelling fixes
o NULL noise removal, missing __iomem in a couple of declarations,
removal of bogus cast to void * in iounmap() calls.
o JFFS2 locking fix: Don't hold references to obsolete nodes without
lock
o [MTD] Bug in 2.6.10 mtd driver for physmem mapped flash chips
o MTD: include moduleparam.h in DiskOnChip driver
o MTD: Fix config option name in Makefile for IBM 750FX/750GX boards
o [MTD] add missing dependencies on MTD_PARTITIONS
o MTD: Cosmetic ident catchup
o MTD: Remove long-obsolete DiskOnChip 1000 driver
Dean Nelson:
o export sched_setscheduler() for kernel module use
Deepak Saxena:
o [ARM PATCH] 2264/1: Move platform-specific code out of entry-armv.S
o [ARM PATCH] 2325/1: Cleanup IXP2000 reset handling
o [ARM PATCH] 2326/1: Fix IXP2000 timer implementation
o [ARM PATCH] 2339/1: Don't mask IRQ_STATUS with
IXP2000_VALID_IRQ_MASK
o [ARM PATCH] 2307/1: Add IXP46x and IXDPG465 implementation
o [ARM PATCH] 2338/1: IXP465 and IXDPG465 header file updates
o [ARM PATCH] 2346/1: Update IXP4xx documentation
o [ARM PATCH] 2348/1: Fix IXDP2800 PCI irq mapping
o Update IOP3xx I2C bus driver
o [ARM PATCH] 2358/1: Add IXP46x I2C platform device
Dmitry Torokhov:
o Input: pull common code from psmouse and atkbd into libps2 module
o Input: add serio_[un]pin_driver() functions so attribute handlers
can safely access driver bound to a serio port.
o Input: atkbd - export extra, scroll, set, softrepeat and softraw as
individual keyboard attributes (sysfs) and allow them to be
set/changed independently for each keyboard:
o Input: clean up ALPS DualPoint logic
o Input: add a new signature for ALPS DualPoint found in Dell
Inspiron 8500
o Input: psmouse - add set_rate and set_resolution handlers to make
adding new protocols easier and remove special knowledge from
psmouse-base.c
o Input: synaptics - not only switch to 4-byte client protocol but
also revert to 3-byte mode if client selected lower protocol.
o Input: psmouse - reset mouse before doing intellimouse/explorer
probes in case it got confused by earlier probes; switch to
streaming mode before setting scale and resolution,
o Input: psmouse - export rate, resolution, resetafter and
smartscroll (Logitech only) as individual mouse attributes (sysfs)
and allow them to be set/changed independently for each mouse:
o Input: psmouse - drop PS2TPP protocol (it is handled exactly like
PS2PP) to free spot for THINKPS protocol and keep old protocol
numbers for binary compatibility with Synaptics/ALPS touchpad
driver for X.
o Input: psmouse - make logips2pp fully decode its protocol packets
and not rely on generic handler to finish job.
o Input: psmouse - explicitely specify packet size instead of relying
o Input: couple of whitespace fixes
o Input: evdev, joydev, mousedev, tsdev - remove class device and
devfs entry when hardware driver disconnects instead of waiting for
the last user to drop off. This way hardware drivers can be
unloaded at any time.
o Input: when creating input devices for hardware attached to a serio
port properly set input_device->dev pointer so when corresponding
class device is created it will show proper links to parent device
and driver in sysfs hierarchy.
o Input: i8042 - allow turning debugging on and off "on-fly" so
people do not have to recompile their kernels to provide debug
info.
o Input: i8042 - get rid of old style power management handler since
APM calls both pm_send and device_suspend.
o Input: i8042 - get rid of reboot notifier as suspend method should
do the job.
o Input: get rid of pm_dev in input core as it is deprecated and
nothing uses it anyway.
o Input: gscps2 - remove unused statically allocated
gscps2_serio_port variable as the port is allocated dynamically.
o Input: parkbd - switch to using module_param. Parameter names are
parkbd.port and parkbd.mode
o Input: i8042 - fix "debug" parameter sysfs permissions
Domen Puncer:
o it87: /proc/ioports fix
o JFS: delete unused file
o MTD: Remove gratuitous (void *) casts
o arm26: Remove unreferenced file
o hotplug/acpiphp_ibm: module_param fix
o fs/proc/base.c: array size
o fs/proc/proc_tty.c: avoid array
o remove unused drivers/char/rio/cdproto.h
o remove unused drivers/char/rsf16fmi.h
o ppc64: semicolon in rtasd.c
Dominik Brodowski:
o cpufreq 2.4 interface removal schedule
o pcmcia: new ds - cs interface
o pcmcia: call device drivers from ds, not from cs
o pcmcia: unify bind_mtd and pcmcia_bind_mtd
o pcmcia: unfiy bind_device and pcmcia_bind_device
o pcmcia: device model integration can only be submitted under GPL
o pcmcia: add pcmcia_device(s)
o pcmcia: remove socket_bind_t, use pcmcia_devices instead
o pcmcia: remove internal module use count, use module_refcount
instead
o pcmcia: set driver's .owner field
o pcmcia: move pcmcia_(un,)register_client to ds
o pcmcia: device model integration can only be submitted under GPL,
part 2
o pcmcia: use kref instead of native atomic counter
o pcmcia: add pcmcia_(put,get)_socket
o pcmcia: grab a reference to the cs-socket in ds
o pcmcia: get a reference to ds-socket for each pcmcia_device
o pcmcia: add a pointer to client in struct pcmcia_device
o pcmcia: use pcmcia_device in send_event
o pcmcia: use pcmcia_device to mark clients as stale
o pcmcia: code moving in ds
o pcmcia: use pcmcia_device in register_client
o pcmcia: direct-ordered unbind of devices
o pcmcia: BUG on dev_list != NULL
o pcmcia: BUG() if clients are kept too long
o pcmcia: move struct client_t inside struct pcmcia_device
o pcmcia: use driver_find in ds
o pcmcia: SET_NETDEV for network devices
o pcmcia: SET_NETDEV for wireless network devices
o pcmcia: reduce stack usage in ds_ioctl (Randy Dunlap)
o pcmcia: rename PCMCIA devices
o pcmcia: remove obsolete code
o pcmcia: remove pending_events
o pcmcia: remove client_attributes
o pcmcia: remove unneeded parameter from rsrc_mgr
o pcmcia: remove dev_info from client
o pcmcia: remove mtd and bulkmem (replaced by pcmciamtd)
o pcmcia: per-socket resource database
o pcmcia: validate_mem only for non-statically mapped sockets
o pcmcia: adjust_io_region only for non-statically mapped sockets
o pcmcia: find_io_region only for non-statically mapped sockets
o pcmcia: find_mem_region only for non-statically mapped sockets
o pcmcia: adjust_ and release_resources only for non-statically
mapped sockets
o pcmcia: move resource handling code only for non-statically mapped
sockets to other file
o pcmcia: make rsrc_nonstatic an independend module
o pcmcia: allocate resource database per-socket
o pcmcia: remove typedef
o pcmcia: grab lock in resource_release
o pcmcia: yenta override to re-allocate resources
Douglas Gilbert:
o scsi_debug v 1.75
o SCSI: updates to constants.c
o SCSI: descriptor sense format, mid-level
Duncan Sands:
o usb atm: macro consolidation, fixes debugging problem
Ed L. Cashin:
o add ATA over Ethernet driver
o rename ETH_P_AOE
Edwin Olson:
o usb-serial: add tty_hangup on disconnect
o ftdi_sio: Add sysfs attributes for event character and latency
Eric Moore:
o LSI Logic - SAS and FC PCI ID's
Esben Nielsen:
o [ARCNET]: Fixes
Evgeniy Polyakov:
o w1: Documentation bits for generic w1 behaviour
Felix Kuehling:
o drm: make reclaim_buffers take dev argument
Franz Pletz:
o loop device resursion avoidance
François Romieu:
o r8169: add ethtool_ops.{get_regs_len/get_regs}
o r8169: per device receive buffer size
o r8169: code cleanup
o r8169: enable MWI
o r8169: bump version number
o r8169: sync the names of a few bits with the 8139cp driver
o r8169: comment a gcc 2.95.x bug
o r8169: Tx checksum offload
o r8169: advertise DMA to high memory
o r8169: Rx checksum support
o r8169: vlan support
o r8169: miscalculation of available Tx descriptors
o r8169: hint for Tx flow control
o r8169: TSO support
o r8169: Mac identifier extracted from Realtek's driver v2.2
o r8169: default on disabling PCIDAC
o r8169: Tx timeout rework
o r8169: wrong advertisement of VLAN features
o r8169: automatic pci dac step down
o r8169: rtl8169_close() races
o r8169: cleanup
o r8169: always clean Tx desc
o r8169: unneeded synchronize_irq()
o r8169: netconsole support
o r8169: missing netif_poll_enable and irq ack
o r8169: C 101
o r8169: Large Send enablement
o r8169: reduce max MTU for large frames
o r8169: oversized driver field for ethtool
o 3c59x: missing pci_disable_device
Ganesh Venkatesan:
o e100: Replace locally implemented delay routines
o e100: Sort Device IDs
o e100: Update driver version number
o e1000: ITR does not default correctly on 2.6.x kernels
o e1000: Fix kernel panic when the interface is brought down while
the NAPI enabled driver is under stress
o e1000: Fix ethtool diagnostics -- specifically for blade server
implementations
o e1000: Enabling NETIF_F_SG without checksum offload is illegal
o e1000: Avoid filling tx_ring completely - shemminger@osdl.org
o e1000: remove a redundant assignment to a local nr_frags in
e1000_xmit_frame
o e1000: Replace schedule_timeout() with
msleep()/msleep_interruptible() nacc@us.ibm.com
o e1000: Fix tx resource cleanup logic
o e1000: {set, get}_wol is now symmetric for 82545EM adapters
o e1000: Kernel API change for Module_param_array_named
o e1000: Added workaround to prevent inadvertent gigabit waveform to
be sent out on the wire due to init-time operations on the IGP phy.
o e1000: Applied eeprom fix where it was possible to read/write
o e1000: Applied smart speed fix where the code was forcing smart
speed on all the time. Now it will honor the setting defined in
the eeprom.
o e1000: Driver version number, white spaces, comments, device id &
other changes
o e1000: Documentation/networking/e1000.txt update
o e100: Documentation/networking/e100.txt update
Geert Uytterhoeven:
o M68k: Update defconfigs for 2.6.10
o MMC_WBSD depends on ISA
o M68k: Remove nowhere referenced files
o Update Geert's address in CREDITS
George G. Davis:
o [ARM PATCH] 2324/1: Convert ARM proc files to use domain and
pgtable manifest constants
o [ARM PATCH] 2327/1: Thumb ld/st alignment fault fixups
George T. Joseph:
o [ARM PATCH] 2334/1: Corrects ixp4xx USB base addr and adds
QMGRr/EthA/EthB in ixp4xx-regs.h
Gerd Knorr:
o uml: terminal cleanup
o uml: symbol export
o uml: fix umldir init order
o uml: raise tty limit
o uml: sysfs support for uml network driver
o uml: sysfs support for the uml block devices
o fbdev: sysfs fix
o bttv-i2c.c: make two functions static
o bttv-risc.c: make some functions static
o zoran_driver.c: make zoran_num_formats static
o media/video/msp3400.c: remove unused struct d1
o zoran_device.c: make zr36057_init_vfe static
o drivers/media/video: the easy cleanups
Greg Banks:
o oprofile: add check_user_page_readable()
o oprofile: arch-independent code for stack trace sampling
o oprofile: backtrace operation does not initialized
o oprofile: i386 support for stack trace sampling
o oprofile: ia64 support for oprofile stack trace sampling
o oprofile: update alpha for api changes
o oprofile: update arm for api changes
o oprofile: update ppc for api changes
o oprofile: update parisc for api changes
o oprofile: update s390 for api changes
o oprofile: update sh for api changes
o oprofile: update sparc64 for api changes
o oprofile: fix ia64 callgraph bug with old gcc
Greg Kroah-Hartman:
o misc: remove device.h #include from miscdevice.h
o Documentation: fix some grammer in the stable_api_nonsense.txt file
o misc: remove miscdevice.h from pci hotplug drivers as they do not
need it
o USB: fix sparse and compiler warnings in ti_usb_3410_5052.c
o USB: delete the tiglusb driver as it's not needed
o debugfs: add debugfs
o USB: convert uhci-hcd driver to use debugfs
o PCI: fix up function calls for CONFIG_PCI=N
o AOE: fix up sparse warnings and get rid of a kmalloc in the aoe
driver
o USB: fix up some sparse warnings in the new garmin_gps driver
o USB: change warning level in ftdi_sio driver of a debug message
o USB: convert the idVendor, idProduct, bcdDevice and bcdUSB fields
to __le16
o USB: change wTotalLength field in struct usb_config_descriptor to
be __le16
o USB: change wMaxPacketSize field in struct usb_config_descriptor to
be __le16
o USB Gadget: fix up simple sparse warnings (NULL stuff) in
dummy_hcd.c driver
o USB: explicitly mark the endianness of some visor data fields
o sysfs: export the /sys/kernel subsystem for people to use
o debugfs: add /sys/kernel/debug mount point for people to mount
debugfs on
o PCI: fix typo on previous pci_set_power_state() patch for hte
sis900 driver
o PCI: fix bttv-driver "cleanup" that called an incorrect function
o Fix up udev url in Documentation/Changes file
o add feature-removal-schedule.txt documentation
o Cset exclude: jmunsin@iki.fi|ChangeSet|20041221190949|45117
o PCI Hotplug: remove my old email address
Greg Ungerer:
o m68knommu: remove use of obsolete MAP_NR macro
o m68knommu: remove unneccessary SUN conditionals from
m68knommu/elf.h
o m68knommu: remove unused keyboard.h
o m68knommu: remove duplicate and unused entries in Kconfig
o m68knommu: export lib udelay symbol for modules
o m68knommu: comment formating change to linker script
o m68knommu: convert KTHRAD_SIZE to THREAD_SIZE and remove unused
macros
o m68knommu: optimized bitops operations for m68knommu
o m68knommu: convert use of KTHRAD_SIZE to THREAD_SIZE in process.c
o m68knommu: remove unused include/asm-m68knommu/nap.h
o m68knommu: remove use of obsolete MAP_NR macro processor.h
o m68knommu: include module.h to cleanup warnings in checksum.c
o m68knommu: common head code for all ColdFire platforms
o m68knommu: cache init code for ColdFire CPU's
o m68knommu: change ColdFire 5206 SDRAM register names
o m68knommu: move ColdFire 5249 platform specific startup code
o m68knommu: define differences in ColdFire 5270/1 and 5274/5 SDRAM
registers
o m68knommu: definitions for the SDRAM registers on the ColdFire 528x
CPU's
o m68knommu: remove duplicate THREAD_SIZE define
o m68knommu: new hardware support and optimizations for the ColdFire
serial driver
o m68knommu: optimize atomic macros
H. Peter Anvin:
o Trivial cleanup in arch/i386/kernel/head.S
o i386 boot loader IDs
o /proc/sys/kernel/bootloader_type
o raid6: altivec support
Heikki Lindholm:
o MTD: Use JEDEC probe for flash chips on Ebony board
o MTD: New mapping driver for IBM 405GP 'Walnut' board
Heiko Carstens:
o s390: core patches
o s390: fix pgd_index() compile warnings
o s390: add missing pte_read function
Herbert Pötzl:
o improved wait_8254_wraparound()
Hermann Kneissel:
o Re: garmin gps driver patch 0.23
Hirofumi Ogawa:
o NLS: Fix overflow of nls_ascii
o pcmcia: Add disable_clkrun option
Hirokazu Takata:
o m32r: Add new relocation types to elf.h
o m32r: Support pgprot_noncached()
o m32r: Update ptrace.c for multithread debugging
o m32r: Cause SIGSEGV for nonexec page execution
o m32r: Don't encode ACE_INSTRUCTION in address
o m32r: Clean up arch/m32r/mm/fault.c
o m32r: Clean up include/asm-m32r/pgtable.h
o m32r: Support PAGE_NONE
o m32r: Remove PAGE_USER
o m32r: Clean up include/asm-m32r/pgtable-2level.h
o m32r: include/asm-m32r/thread_info.h minor updates
o m32r: Use kmalloc for m32r stacks
o m32r: Make kernel headers for mutual exclusion
o m32r: Use generic hardirq framework
o m32r: Update include/asm-m32r/system.h
o m32r: Update include/asm-m32r/mmu_context.h
o oprofile: update m32r for api changes
o m32r: build fix
o m32r: employ new kernel API/ABI
o m32r: include nodemask.h for build fix
Hisashi Hifumi:
o BUG on error handlings in Ext3 under I/O failure condition
Hugh Dickins:
o improve preemption on SMP
o vmtrunc: truncate_count not atomic
o vmtrunc: restore unmap_vmas zap_bytes
o vmtrunc: unmap_mapping_range_tree
o vmtrunc: unmap_mapping dropping i_mmap_lock
o vmtrunc: vm_truncate_count race caution
o vmtrunc: bug if page_mapped
o vmtrunc: restart_addr in truncate_count
o 3c59x: VORTEX select MII
o cputime: introduce cputime
o 4level swapoff hang fix
Ian Campbell:
o I2C: i2c-algo-bit should support I2C_FUNC_I2C
Ian Molton:
o arm26: remove arm32 cruft
o arm26: update the atomic ops
o arm26 build system updates
o arm26: update comments, headers, notes
o arm26: necessary compilation fixes for 2.6.10
o arm26:cleanup trap handling assembly
o arm26: new execve code
o arm26: move some files to better locations
o arm26: remove shark (arm32) from arm26
o arm26: softirq update
o arm26: update system.h to some semblance of recentness
o arm26: replace arm32 time handling code with smaller version
o arm26: TLB update
o arm26: better put_user macros
o arm26: better unistd.h (reimplemented based on arm32)
Ian Pratt:
o [NET]: Add alloc_skb_from_cache
Ingo Molnar:
o preempt cleanup
o add lock_need_resched()
o sched: add cond_resched_softirq()
o sched: ext3: fix scheduling latencies in ext3
o break latency in invalidate_list()
o sched: vfs: fix scheduling latencies in prune_dcache() and
select_parent()
o sched: net: fix scheduling latencies in netstat
o sched: net: fix scheduling latencies in __release_sock
o sched: mm: fix scheduling latencies in unmap_vmas()
o sched: mm: fix scheduling latencies in get_user_pages()
o sched: mm: fix scheduling latencies in filemap_sync()
o fix keventd execution dependency
o sched: fix scheduling latencies in vgacon.c
o sched: fix scheduling latencies for !PREEMPT kernels
o idle thread preemption fix
o oprofile smp_processor_id() fixes
o Fix smp_processor_id() warning in numa_node_id()
o remove the BKL by turning it into a semaphore
o sched: Make PREEMPT_BKL depend on PREEMPT alone
J. A. Magallon:
o make gconfig work with gtk-2.4
James Bottomley:
o update the fc_transport_class to use a workqueue instead of a
timeout
o SCSI: Add transport destructors
o SCSI: Add missing state transition BLOCK->OFFLINE
o scsi: LLDD dynamic scan aids
o fixup dynamic scan aids EXPORT_SYMBOL mismerge
o Rename SCSI ChangeLog to reflect its venarability
o SCSI: Quieten the incorrect state change message
o SCSI: Add basic infrastructure for transport host statistics
o SCSI: Add FC transport host statistics
o SCSI:add change_queue_depth API to scsi host template
o SCSI: convert 53c700 driver to use change_queue_depth API
o SCSI: add queue_type entry in sysfs
o SCSI: update 53c700 to use the change_queue_type API
o SCSI: Add FC transport host attributes
o SCSI: fix compile warning in fc transport class
James Lamanna:
o USB: ov511.c - vfree() checking cleanups
James Morris:
o SELinux scalability: add spin_trylock_irq and spin_trylock_irqsave
o SELinux scalability: convert AVC to RCU
o SELinux: atomic_dec_and_test() bug
o SELinux scalability: AVC statistics and tuning
James Nelson:
o hw_random: Minor cleanup to hw_random.c
o lcd: fix memory leak, code cleanup
o moxa: Remove ancient changelog README.moxa
o moxa: Remove README.moxa from Documentation/00-INDEX
o specialix: remove bouncing e-mail address
o stallion: Update to Documentation/stallion.txt
o riscom8: Update staus and documentation of driver
o cciss: Documentation update
o cciss: Correct mailing list address in source code
o cpqarray: Correct mailing list address in source code
o sh: Remove x86-specific help in Kconfig
o cyclades: Put README.cycladeZ in Documentation/serial
o tipar: Document driver options
o tipar: Code cleanup
Jan Dittmer:
o eth1394 MODULE_PARM conversion
o isapnp module_param conversion
o sr module_param conversion
o media/video module_param conversion
o btaudio module_param conversion
Jan Harkes:
o coda: bounds checking
o code: ulist_for_each_entry_safe()
o coda: make global code static
o coda: remove unused coda_mknod
o coda: rename coda_psdev to coda
Jan Kara:
o Expose reiserfs_sync_fs()
o Fix reiserfs quota debug messages
o Fix of quota deadlock on pagelock: quota core
o quota umount race fix
o Fix of quota deadlock on pagelock: ext2
o Fix of quota deadlock on pagelock: ext3
o Allow disabling quota messages to console
o Fix maintainers entry
Jan Kasprzak:
o cosa.c intialization crash
o cosa.h ioctl numbers
Jan-Benedict Glaw:
o Input: correct the the wrong use of "DB9" to the correct name,
"DE9"
o input: More comment fixes in lkkbd.c
Jarkko Lavinen:
o MTD: Increase nand_write_page() ECC buffer size to cope with
12-byte ECC
o MTD: Make nand_write_page() ECC buffer size consistent with
nand_read_ecc()
Jaroslav Kysela:
o [ALSA] use blacklist/whitelist for (non-)audio Bt878 cards
o [ALSA] fix sequencer sleeping in interrupt context
o [ALSA] rearrange OSS SPARC dependencies
o [ALSA] snd-usb-usx2y - crash fix for OHCI USB-HCDs
o [ALSA] au88x0: add resetup dma
o [ALSA] au88x0: fix is-quad oops
o [ALSA] au88x0: set-levels cleanup
o [ALSA] au88x0: sign_invert cleanup
o [ALSA] au88x0: name typo
o [ALSA] au88x0: comment and whitespace cleanup
o [ALSA] fix data type mismatch in sign_invert
o [ALSA] remove old compatibility code
o [ALSA] remove dead exports
o [ALSA] Limit parity error messages
o [ALSA] remove kernel version info from proc file
o [ALSA] fixed emu10k1_fx8010_code_t structure to be less than 8192
bytes
o [ALSA] emu10k1 - fixes against the last emufx changes
o [ALSA] replace schedule_timeout() with msleep()
o [ALSA] replace schedule_timeout() with msleep()
o [ALSA] emu10k1 - another attempt to correct the new emufx DSP code
o [ALSA] Added SNDRV_HWDEP_IFACE_BLUETOOTH
o [ALSA] remove snd_seq_simple_id
o [ALSA] Fixed the description of module_parm_array()
o [ALSA] removes unneeded spin_lock_irqsave()s from snd-es1968
o [ALSA] Add subvendor ID to the pci id table of vx222 driver
o [ALSA] Fixed issues with Abit AV8
o [ALSA] [emu10k1] add interval timer support
o [ALSA] emu10k1 - fixed remaining problems with new DSP code loading
o [ALSA] handle missing control bitmap when parsing MUDs
o [ALSA] read bmControls array in correct order
o [ALSA] fix parsing of mixer unit descriptors
o [ALSA] nonblock_open=1 by default for OSS PCM API emulation
o ALSA 1.0.7
o [ALSA] Fix the missing line in the patch for hdsp accurate_ptr
o [ALSA] Fix WM8770 Init
o [ALSA] AC97 quirks for Dell
o [ALSA] fix sleep in atomic during prepare callback
o [ALSA] Add pci_save_state() in suspend
o [ALSA] add Line/Headphone jack detection for AD1981A/B
o [ALSA] fix iomem mmap
o [ALSA] fix MIDI GS chorus/reverb mode
o [ALSA] fix chorus/reverb FX loader
o [ALSA] minor send routing cleanup
o [ALSA] whitespace cleanup
o [ALSA] Add pci_disable_device() to removal and error paths
o [ALSA] Addition of pci_disable_device() and cleanup
o [ALSA] via82xx: Enable DXS on ABIT KV8 Pro
o [ALSA] sort DXS whitelist
o [ALSA] AD18xx/19xx resume fix
o [ALSA] fix display of send routing in /proc
o [ALSA] ALSA PCI drivers: misc cleanups
o [ALSA] Fixes the 'It disables the right channel' bug
o [ALSA] Support for Audigy2 Value SB0400
o [ALSA] make some code static
o [ALSA] check CONFIG_COMPAT for snd-ioctl32
o [ALSA] add register dump to proc
o [ALSA] Fixed problem with changing size of etram
o [ALSA] [trivial] Fix compile warnings
o [ALSA] Fix the detection of Audigy2 ZS
o [ALSA] fix weird placement of static keyword in
sound/core/pcm_memory.c
o [ALSA] misc clean up
o [ALSA] ALSA ISA drivers: misc cleanups
o [ALSA] Disable 'IEC958 Input Monitor' switch for ALC codecs
o [ALSA] alternate ALS0200 ident string
o [ALSA] alternate CS4235 ident string
o [ALSA] Fix compilation without CONFIG_PM
o [ALSA] Export functions for ioctl32 wrapper
o [ALSA] Fix ioctl32 wrapper (for SPARC)
o [ALSA] Clean up of kfree()/vfree() NULL checks
o [ALSA] Fix targets for GUS and OPL4
o [ALSA] [trivial] Fix compilation warnings on 64bit
o [ALSA] Fix the interface type of mixer controls
o [ALSA] Fix interface type for some mixer controls
o [ALSA] ifdef typos: sound_isa_cs423x_cs4231_lib.c
o [ALSA] ifdef typos: sound_isa_es18xx.c
o [ALSA] check __copy_to_user in sscape_upload_bootblock()
o [ALSA] ALSA core: misc cleanups
o [ALSA] Added VIA82xx-modem driver
o [ALSA] Remove the NULL pointer check in kfree/vfree wrappers
o [ALSA] Use macro usb_maxpacket() for portability
o [ALSA] Fix sleep in h/w volume control
o [ALSA] IEC958 Capture mixer controls and Universe support
o [ALSA] disable legacy IRQs before request_irq() to avoid unhandled
interrupts
o [ALSA] Update user-space access from sscape driver
o [ALSA] opl4 depends on opl3
o [ALSA] Add 'Duplicate Front' control
o [ALSA] misc cleanups
o ALSA CVS update ENS1370/1+ driver Trivial patch to enable rear out
selection for ens1373 on the Gigabyte GA-8IEXP motherboard.
o [ALSA] Fix detection of Xbox
o [ALSA] hwdep interface for pcm data
o [ALSA] Add missing source codes in the last hwdep-pcm patch
o [ALSA] Add missing USX2Y_PCM hwdep entry
o [ALSA] Fix non-symmetrical page_attr changes
o [ALSA] [trivial] Fix compile warning
o [ALSA] Midiman Delta DIO2496 has two stereo analog outs
o [ALSA] Clean up power-management
o [ALSA] Export snd_ctl_elem_read/write() functions
o [ALSA] buffersize and constraints on pmac
o [ALSA] Add volatile to IO pinters
o [ALSA] Return -EBADFD when the device is disconnected
o [ALSA] Fix memory corruption
o [ALSA] Hotplug firmware loader support
o [ALSA] Add description about hotplug fw loader
o [ALSA] Fix interrupt generation on MIDI input for es1938 sound
cards
o [ALSA] Fix CMI9739A silent problem
o [ALSA] Fix compilation errors
o [ALSA] Fix the invalid DMA pointer value
o [ALSA] Add PCXHR hwdep iface type
o [ALSA] Fix invalid 'AutoSync Reference' value
o [ALSA] Fix the wrong sign of format data entries
o [ALSA] Fix compile warning
o [ALSA] Add mute LED quirk
o [ALSA] Fix creation of control devices over udev
o [ALSA] Replace long delays with msleep()
o [ALSA] Unify ac97 control callbacks
o [ALSA] Remove spinlock in callbacks
o [ALSA] Remove unnecessary ac97 spinlocks
o [ALSA] Fix spinlocks
o [ALSA] Spinlock removal and loop fix
o [ALSA] Use msleep() in ac97 callbacks
o [ALSA] Don't probe rates when bus->no_vra is set
o [ALSA] Fix handling of user-defined controls
o [ALSA] Allow strings for ac97_quirk options
o [ALSA] Add emu10k1x driver
o [ALSA] Add snd-ca0106 driver
o [ALSA] Avoid VRA on codec chips
o [ALSA] Code clean up
o [ALSA CVS] delete unused file
o [ALSA] Fix open handling
o [ALSA] Fix compile warning (make inline)
o [ALSA] Fix compile warning
o [ALSA] Add hotplug firmware loader support
o [ALSA] Update documentation for hotplug fw loader
o [ALSA] Fix the release of resources at error path
o [ALSA] Description about snd_card_set_dev()
o [ALSA] Clean up codes
o [ALSA] Fix the order of creation of instances
o [ALSA] Remove superfluous code
o [ALSA] Add CODEC and BUS device types
o [ALSA] Fix spinlock
o [ALSA] Clean up handling of user-defined controls
o [ALSA] Clean up and fix stereo mutes
o [ALSA] Add a new ID
o [ALSA] Fix NULL pointer access
o [ALSA] Add a DXS entry for ABIT VA-20
o [ALSA] Fix C-Media codecs
o [ALSA] Add codec id in component names
o [ALSA] Don't probe sample rates on non-VRA chips
o [ALSA] Print values at errors
o [ALSA] 1.0.8rc2
Jason Gaston:
o [patch] Intel ICH7 DID's, PIRQ and PATA support
o SATA support for Intel ICH7
Jay Lan:
o enhanced I/O accounting data patch
o enhanced Memory accounting data collection
o acct_update_integrals speedup
Jean Delvare:
o I2C: use chip driver name to request regions
o I2C: i2c-algo-bit should support I2C_FUNC_I2C
o I2C: i2c-nforce2 supports the nForce3 250Gb
o I2C: Discard old driver porting documentation
o I2C: Use PCI_DEVICE in bus drivers
o I2C: Remove checksum code in eeprom driver
o I2C: Add secondary Super-I/O address support to
o I2C: Improve VID code for the W83627THF
o I2C: Fix MAX6657/8/9 detection in lm90
o I2C: Add byte commands to i2c-stub
o I2C: Update fscher pwm functionality
Jeff Dike:
o uml: fix some ptrace functions returns values
o uml: redo the signal delivery mechanism
o uml: make restorer match i386
o uml: unistd.h cleanup
o uml: remove a quilt-induced duplicity
o uml: fix sigreturn to not copy_user under a spinlock
o uml: close host file descriptors properly
o uml: free host resources associated with freed IRQs
o uml: add elf vsyscall support
o uml: make vsyscall page into process page tables
o uml: include vsyscall page in core dumps
o uml: Add TRACESYSGOOD support
o uml: kill host processes properly
o uml: defconfig update
o uml: system call restart fixes
o uml: use SYSEMU_SINGLESTEP
o uml: declare ptrace_setfpregs
o uml: Remove bogus __NR_sigreturn check
o uml: Fix highmem compilation
o UML: add some pudding
o UML: Use va_end wherever va_args are used
o UML: split out arch-specific syscalls from generic ones
o UML: Three-level page table support
o UML: x86-64 core support
o UML: x86-64 config support
o UML: Factor out register saving and restoring
o UML: x86_64 ptrace support
o UML: Separate out signal reception
o UML: Make a common misconfiguration impossible
o UML: Separate out the time code
o UML: x86-64 headers
o UML: Split out arch link address definitions
o UML: code tidying
o UML: use for_each_cpu
o UML: 2.6.10 ptrace updates
o UML: add the new syscalls
o UML: 64-bit cleanups
o UML: Silence some message from the console driver
o UML: Allow arches to opt out of !SA_INFO signals
o UML: Add a missing include
o UML: sparse annotations
o UML: Fix sys_call_table syntax
o UML: Fix make clean
o UML: define CONFIG_INPUT better
o UML: Fix a compile warning
Jeff Garzik:
o [netdrvr eepro100] fix pci_iomap() args and info msg that follows
o [sound/oss i810_audio] use module_param()
o [sound/oss] use module_param() in soundcard.c and uart401.c
o [libata sata_uli] add 5281 support, fix SATA phy setup for others
o drivers/block/floppy: kill #include linux/version.h
o x86-64: kernel/sys.c build fix
o [netdrvr s2io] make debug_level variable static
o fix sx8 blk driver device naming
Jens Axboe:
o kill locking around scsi_done()
Jeremy Katz:
o Fix sx8 device naming in sysfs
Jesper Juhl:
o [IRDA]: Kill useless parens from return statements in irnet.h
o [MTD] remove unnecessary casts from drivers/mtd/maps/nettel.c and
kill two warnings
o add printing of udev version to scripts/ver_linux
Jesse Barnes:
o sysfs: add mmap support to struct bin_attribute files
o PCI: export PCI resources in sysfs
o driver core: allow struct bin_attributes in class devices
o PCI: add legacy resources to sysfs for pci busses
o fix ROM enable/disable in r128 and radeon fb drivers
o [IA64] swiotlb.c: long line, whitespace, and other cleanup
o fix oops when reading resourceN files in sysfs
o Replace 'numnodes' with 'node_online_map' - ia64
Jim Hague:
o pm2fb: module parameters and module-conditional code
o pm2fb: save/restore memory config
o pm2fb: use modedb in modules
o pm2fb: fix big-endian (Sparc) support
o pm2fb: fix fbi image display on 24 bit depth big endian
Jim Paris:
o [ide] PCI quirk for ICH3-M IDE
John Lenz:
o input: Add LED definitions for PDAs
John W. Linville:
o r8169: endian-swap return of rtl8169_tx_vlan_tag()
o r8169: fix RxVlan bit manipulation
o r8169: simplify trick if() expression
o 3c59x: Add MODULE_VERSION
o 8139too: Add MODULE_VERSION
o r8169: Add MODULE_VERSION
o e100: Add MODULE_VERSION
o tulip: Add MODULE_VERSION
o 3c59x: reload EEPROM values at rmmod for needy cards
o 3c59x: remove EEPROM_RESET for 3c905B
o 3c59x: Add EEPROM_RESET for 3c900 Boomerang
Jon Smirl:
o drm: memory allocation patch
o drm: move fops into drivers
o drm: rearrange some functions for new split
o drm: move ati_pcigart into drm core
o drm: use spin_lock_init instead of SPIN_LOCK_UNLOCKED
Jorn Engel:
o MTD: phram device cleanup
o [MTD] New blockdev-backed 'fake' MTD device
Josh Aas:
o sched: remove outdated/misleading comments
Jürgen Quade:
o signedness fix in deadline-iosched.c
Kamezawa Hiroyuki:
o no buddy bitmap patch revist: intro and includes
o no buddy bitmap patch revisit: for mm/page_alloc.c
o no buddy bitmap patch revist: for ia64
Keith Owens:
o kallsyms: Clean up x86-64 special casing of in_gate_area()
o kallsyms: Add in_gate_area_no_task()
o kallsyms: gate page is part of the kernel, honour
CONFIG_KALLSYMS_ALL
o kallsyms: Avoid kallsyms corner case on _etext and _einittext
Keith Withwell:
o drm: correct historic mis-attribution of copyright
Kenji Kaneshige:
o IRQ resource deallocation: ACPI
o IRQ resource deallocation: ia64
Kirill Korotaev:
o 4/4GB: Incorrect bound check in do_getname()
Komuro:
o pcmcia: pd6729: e-mail update
o pcmcia: pd6729: cleanups
o pcmcia: pd6729: isa_irq handling
Krzysztof Halasa:
o net/wan/n2.c: remove an unused function
Kumar Gala:
o Driver Core: Add platform_get_resource_byname &
platform_get_resource_byirq
o ppc32: freescale Book-E MMU cleanup
o ppc32: refactor common book-e exception code
o ppc32: performance Monitor/Oprofile support for e500
o Fix prototypes & externs in e500 oprofile support
Ladislav Michl:
o I2C: let I2C_ALGO_SGI depend on MIPS
Leendert van Doorn:
o arch/i386/kernel/cpu/mtrr: too many bits are masked off from CR4
Len Brown:
o [ACPI] Provide core hotplug support in ACPI
o [ACPI] create ACPI hotplug eject interface
o [ACPI] IA64-specific support for mapping lsapic to cpu array
o IA64 CPU hotplug topology
o [ACPI] Extend processor driver to support ACPI-based Physical CPU
hotplug
o [ACPI] Initial container driver to support hotplug notifications
o [ACPI] fix mis-merge in processor.c
o [ACPI] CPU hotplug, use kobject_hotplug(), kobject_register()
o [ACPI] fix VIA IRQ issue by enabling VIA quirk
http://bugzilla.kernel.org/show_bug.cgi?id=3319
o [ACPI] S3 resume using RTC
http://bugzilla.kernel.org/show_bug.cgi?id=1320
o [ACPI] fix "Error getting context for object" warning
http://bugzilla.kernel.org/show_bug.cgi?id=3805
o [ACPI] add "acpi_fake_ecdt" workaround for Gateway
o [ACPI] handle GPE sharing between button and lid
o [ACPI] fixes from stack consumption audit
o build fix
o [ACPI] 32-bit EC access
o build fix
o [ACPI] ACPICA 20041119 from Bob Moore
o [ACPI] ACPICA 20041203 from Bob Moore and Alexey Starikovskiy
o [ACPI] remove duplicate _PDC #defines resulting from mis-merge
o [ACPI] fix polarity of CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI message
o [ACPI] fix return syntax
o [ACPI] ACPICA 20041210 from Bob Moore
o [ACPI] Split the ACPI Processor P-States library into a different
file
o [ACPI] Split the ACPI Processor T-States handling into a different
file
o [ACPI] Split the ACPI Processor C-States handling into a different
file
o [ACPI] Split the ACPI Processor passive cooling code into a
different file
o [ACPI] Finalize the splitting of processor.c by moving the rest to
processor_core.c
o [ACPI] Shorten the times IRQs are disabled in throttling
o [ACPI] Differentiate between C-States and C-state type
o [ACPI] Split up the extraction of information from the FADT and the
pblk_address (acpi_processor_get_power_info_fadt()) and the
validation whether the state is indeed available
(acpi_processor_power_verify()).
o [ACPI] deleted unused default c-state
o [ACPI] make power.state a pointer
o [ACPI] make the c-state policy decisions of demotion and promotion
independent of the assumption "one state per type." make the state
a pointer inside struct acpi_processor_cx_policy.
o [ACPI] Add _CST parsing
o [ACPI] Handle _CST change notifications
o [ACPI] Notify the BIOS that Linux can handle _CST
o [ACPI] Consolidate code in processor_idle()
o [ACPI] Export /sys/module/processor/parameters/max_cstate
o [ACPI] max_cstate shall limit C-states not C-state-types
o [ACPI] tweak /proc/acpi/processor/CPU0/power format Current policy
is to name both C-state-types and the actual C-States "C[0-n]".
Follow this rule...
o [ACPI] Let C4 demote to C3, not directly to C2
o [ACPI] add "processor.nocst" parameter which blocks _CST parsing
and always uses FADT info instead.
o [ACPI] fix to the stack-audit patch
http://bugzilla.kernel.org/show_bug.cgi?id=2901
o [ACPI] two fixups where promotion and demotion were mixed up
o [ACPI] another fix to the stack-audit patch
http://bugzilla.kernel.org/show_bug.cgi?id=2901
o [ACPI] apply via_interrupt_line_quirk in ACPI mode the same way it
is applied in legacy mode.
o [ACPI] Fix suspend/resume lockup issue by leaving Bus Master
Arbitration enabled.
Lennart Poettering:
o [SERIAL] support for another Rockwell PNP modem
Lennert Buytenhek:
o [ARM PATCH] 2351/1: fix compilation for ixp2000 enp2611 and
ixdp2400 platforms
Li Shaohua:
o time runx too fast after S3
Liam Girdwood:
o [ARM PATCH] 2340/1: Added PXA27x SSP port 3 to kernel io address
range
o [ARM PATCH] 2342/1: Support PXA SSP configuration changes when port
is open
o [ARM PATCH] 2347/1: PXA SSP PSP bit definition
Linus Torvalds:
o Fix the fix
o Revert duplicate AC97 id's
o Now that sparse looks into asms, fix the fake anti-optimizer cast
macro to use the right address space.
o x86: common send_sigtrap helper for debug event SIGTRAP's, and use
that for system call single-step events.
o x86: be a lot more careful about TF handling
o x86: single-step over "popf" without corrupting state
o acpi video device enumeration: fix incorrect device list allocation
o x86 ptrace: remove long stale (and bitrotted) test for PT_DTRACE
without PT_PTRACED.
o x86 single-step: fix up comments and cleanup
o Hide question about SERIO_LIBPS2 unless there is some remote reason
the user migth want to see it.
o Mark HPUSBSCSI scanner broken. You're supposed to use libusb
o fbmem: don't mix code/declarations. That messes up gcc-2.95
o Use 'free_pipe_info()' helper function for pipe closedown
o Make pipe data structure be a circular list of pages, rather than a
circular list of one page.
o Fix do_brk() locking in library loader
o Fix TASK_SIZE range check that got lost in recent
clear_page_range()/4-level page table updates.
o Merge small pipe writes into the write buffers
o Re-use the buffer page for pipe data
o Map new page allocations as part of "prep_new_page"
o Don't use __GFP_CLEAR for user pages
o Make it clear that GFP_ZERO does not work with atomic highmem
allocations
o Clean up stack growth checks and move them into a common function
o Revert moxa status update
o Linux 2.6.11-rc1
Luca Risolia:
o USB: SN9C10x driver updates
Luiz Capitulino:
o [NET]: __sock_create() cleanup
Maciej W. Rozycki:
o PCI: Don't touch BARs of host bridges
o PCI: PCI early fixup missing bits
Manfred Spraul:
o slab: Add more arch overrides to control object alignment
o rcu: make two internal structs static
o rcu: simplify quiescent state detection
o fix missing wakeup in ipc/sem
o forcedeth: add ethtool get/set_settings support
Marcelo Tosatti:
o mm: higher order watermarks
o binfmt_elf fix return error codes and early corrupt binary
detection
Margit Schubert-While:
o prism54 fix resume processing
o prism54 sparse fixes
Mark A. Greer:
o ppc32: Marvell host bridge support (mv64x60)
o ppc32-marvell-host-bridge-support-mv64x60 review fixes
o ppc32: support for Marvell EV-64260[ab]-BP eval platform
o ppc32: support for Force CPCI-690 board
o ppc32: support for Artesyn Katana cPCI boards
Mark Haverkamp:
o aacraid 2.6: Support for new cards
Mark M. Hoffman:
o I2C: probe fewer addresses for asb100 (sensors) driver
o I2C: add new sensors driver: SMSC LPC47B397-NC
Martin J. Bligh:
o Assign PKMAP_BASE dynamically
Martin Josefsson:
o Fix broken RST handling in ip_conntrack
Martin Schwidefsky:
o s390: remove compat setup_arg_pages32
o sys_stime needs a compat function
o Fix index calculations in clear_page_range
o cputime: microsecond based cputime for s390
Matt Domsch:
o EDD: add edd=off and edd=skipmbr options
Matt Mackall:
o kbuild: make kernelrelease
o random: whitespace cleanups
o random: remove pool resizing sysctl
Matt Porter:
o ppc32: PPC4xx PIC rewrite/cleanup
o ppc32: fix ebony.c warnings
o ppc32: remove bogus SPRN_CPC0_GPIO define
o ppc32: add uImage to default targets
o ppc32: fix io_remap_page_range for 36-bit phys platforms
Matthew Dharm:
o USB Storage: support 'bulk32' devices
o USB Storage: Increase Genesys delay
Matthew Dobson:
o cpumask_t initializers
o sched: active_load_balance() fixlet
o Replace 'numnodes' with 'node_online_map' - alpha
o Replace 'numnodes' with 'node_online_map' - arm
o Replace 'numnodes' with 'node_online_map' - i386
o Replace 'numnodes' with 'node_online_map' - m32r
o Replace 'numnodes' with 'node_online_map' - mips
o Replace 'numnodes' with 'node_online_map' - parisc
o Replace 'numnodes' with 'node_online_map' - ppc64
o Replace 'numnodes' with 'node_online_map' - x86_64
Matthew Wilcox:
o Move MCA_bus to linux/mca.h
o PCI: cope with duplicate bus numbers better
o PCI: Software visible configuration request retry status
o [SPARC64]: Stop referencing i_sock directly
o [IA64] Perfmon over-initialises its inodes
o [IA64] Fix memcpy_fromio prototype
o [IA64] Enable ForteMedia in zx1 defconfig
Maximilian Attems:
o ifdef typos: arch_ppc_platforms_prep_setup.c
o ifdef typos: arch_ppc_platforms_prep_setup.c -another one
o ifdef typos: arch_ppc_syslib_ppc4xx_dma.c
o ifdef typos: arch_sh_boards_renesas_hs7751rvoip_io.c
o ifdef typos: drivers_char_ipmi_ipmi_si_intf.c
o ifdef typos: drivers_net_wireless_wavelan_cs.c
o ifdef typos: drivers_usb_net_usbnet.c
o ifdef typos mips: AU1[0X]00_USB_DEVICE
Michal Ludvig:
o [CRYPTO]: Standalone VIA PadLock driver
o VIA PadLock compilation fixes
o Add Michal Ludvig to CREDITS
Michal Schmidt:
o sk98: add netpoll console support
Mike Christie:
o iSCSI transport class
Mike Miller:
o cciss update to version 2.6.4
Milton D. Miller II:
o INITRAMFS: allow no trailer
Miquel van Smoorenburg:
o mark_page_accessed() for read()s on non-page boundaries
Nathan Bryant:
o 3c59x: enable power management unconditionally
Nathan Lynch:
o prohibit slash in proc directory entry names
o introduce idle_task_exit
o ppc64: call idle_task_exit from cpu_die
o cpu_down() warning fix
o ppc64: Make NUMA code handle unexpected layouts
Neil Brown:
o knfsd: nfsd_translate_wouldblocks
o knfsd: svcrpc: auth_null fixes
o knfsd: svcrpc: share code duplicated between auth_unix and
auth_null
o knfsd: nfsd4: fix open_downgrade decode error
o knfsd: rpcsec_gss: comparing pointer to 0 instead of NULL
o knfsd: nfsd4: fix fileid in readdir responses
o knfsd: nfsd4: use the fsid export option when returning the fsid
attribute
o knfsd: nfsd4 encode_dirent cleanup
o knfsd: nfsd4: encode_dirent: superfluous assignment
o knfsd: nfsd4: encode_dirent: superfluous local variables
o knfsd: nfsd4: encode_dirent: more readdir attribute encoding to new
function
o knfsd: nfsd4: encode_dirent: simplify nfs4_encode_dirent_fattr
o knfsd: nfsd4: encode_dirent: move rdattr_error code to new function
o knfsd: nfsd4: encode_dirent: simplify error handling
o knfsd: nfsd4: encode_dirent: simplify control flow
o knfsd: nfsd4: encode_dirent: fix dropit return
o knfsd: nfsd4: encode_dirent: trivial cleanup
o knfsd: move nfserr_openmode checking from nfsd_read/write into
nfs4_preprocess_stateid_op() in preparation for delegation state
o knfsd: check the callback netid in gen_callback
o knfsd: count the nfs4_client structure usage
o knfsd: preparation for delegation: client callback probe
o knfsd: probe the callback path upon a successful
setclientid_confirm
o knfsd: check for existence of file_lock parameter inside of the
kernel lock
o knfsd: get rid of the special delegation_stateid_t, use the
existing stateid_t
o knfsd: add structures for delegation support
o knfsd: allocate and initialize the delegation structure
o knfsd: find a delegation for a file given a stateid
o knfsd: add the delegation release and free functions
o knfsd: changes to expire_client
o knfsd: delay nfsd_colse for delegations until reaping
o knfsd: delegation recall callback rpc
o knfsd: kernel thread for delegation callback
o knfsd: helper functions for deciding to grant a delegation
o knfsd: attempt to hand out a delegation
o knfsd: remove unnecessary stateowner existence check
o knfsd: check for openmode violations given a delegation stateid
o knfsd: add checking of delegation stateids to
nfs4_preprocess_stateid_op
o knfsd: add the DELEGRETURN operation
o knfsd: add to the laundromat service for delegations
o knfsd: clear the recall_lru of delegations at shutdown
o nfsd4_setclientid_confirm locking fix
o md: improve 'hash' code in linear.c
Nick Piggin:
o parentheses to x86-64 macro
o generic 3-level nopmd folding header
o convert i386 to generic nopmd header
o replace clear_page_tables with clear_page_range
o introduce 4-level nopud folding header
o introduce fallback header
o convert ia64 to generic nopud header
o ia64 4-level pgtable fix
o mm: keep count of free areas
o mm: teach kswapd about higher order areas
o compound pages optimisation
o debug sched domains before attach
Nicolas Pitre:
o MTD XIP support: allyesconfig compile fix
o MTD: Fix optimisation which breaks with newer Intel L18 flash chips
o [ARM PATCH] 2369/1: remove some cruft
Nishanth Aravamudan:
o net/gt96100eth: replace gt96100_delay() with msleep_interruptible()
Olaf Hering:
o input: Joydump depends on gameport
o request_irq: avoid slash in proc directory entries
o fix typo and email in SAK.txt
Oleg Drokin:
o reiserfs vs-8115 test adjustment
Oleg Nesterov:
o [NET]: Use prefetching in skb_queue_walk()
o fix double sync_page_range() in generic_file_aio_write()
o rcu: eliminate rcu_ctrlblk.lock
o fix conflicting cpu_idle() declarations
o uninline/kill __exit_mm()
o sched: use cached current value
o don't hide thread_group_leader() from grep
o optimize prefetch() usage in list_for_each_xxx
Oliver Neukum:
o USB: additional device id for kaweth driver
o USB: another workaround for cdc-acm
Olof Johansson:
o ppc64: IOMMU cleanups: rename pci_dma_direct.c
o ppc64: IOMMU cleanups: Main cleanup patch
o ppc64: fix iommu cleanup regression
Olsimar:
o bttv help fix
Paolo 'Blaisorblade' Giarrusso:
o uml: remove most devfs_mk_symlink calls
o uml: fix __wrap_free comment
o hostfs: uml: set .sendfile to generic_file_sendfile
o hostfs: uml: add some other pagecache methods
o Uml: first part rework of run_helper() and users
o uml: finish fixing run_helper failure path
o ext3: use generic_open_file to fix possible preemption bugs
Patrick McHardy:
o [PKT_SCHED]: Clean up tcf_action_init memory handling
o [NETFILTER]: Release dst_entry in PRE_ROUTING after NAT
o [NETFILTER]: Remove CONFIG_IP_NF_NAT_LOCAL config option
o [NETFILTER]: Save a level of indentation in icmp_reply_translation
o [NETFILTER]: Apply PRE_ROUTING manips in LOCAL_OUT for locally
generated icmp errors
o [NETFILTER]: Verify NAT manips have been applied before reversing
them in icmp_reply_translation
o [IPV4]: Let people know where to obtain the ss tool from
Patrick Mochel:
o input: Remove calls to pm_access() and pm_dev_idle() from input.c,
as they're empty functions anyway.
Paul Gortmaker:
o scsi/advansys.c fix !CONFIG_PCI
o 2.6.9 Use skb_padto() in drivers/net/8390.c
Paul Mackerras:
o ppc64: simplify timer_interrupt
o ppc64: use newer RTAS call when available
o ppc64: clean up trap handling
o ppc64: clean up trap handling in head.S
o ppc64: Log machine check errors to error log and NVRAM
Pavel Machek:
o PCI: Cleanup PCI power states
o PCI: add pci_choose_state()
o PCI: add prototype for pci_choose_state()
o PCI: clean up state usage in pci core
o PCI: fix sparse warnings in drivers/net/* and bttv
o fix naming in swsusp
o swsusp: kill unused variable
o swsusp: kill one-line helpers, handle read errors
o swsusp: Small cleanups
o swsusp: Kill O(n^2) algorithm in swsusp
o swsusp: try_to_freeze to make freezing hooks nicer
o pm: remove outdated docs
o docs: add sparse howto
o pm: introduce pm_message_t
o mark older power managment as deprecated
o signal.c: convert assertion to BUG_ON()
o Right severity level for fatal message
Pekka Enberg:
o noop iosched: make code static
o noop iosched: remove unused includes
o oprofile: minor cleanups
Per Hedblom:
o JFFS2: Fix list corruption and memory leak on write retry
Pete Zaitcev:
o Clean mct_u232 in 2.6.10-rc2
Peter Martuccelli:
o audit return code and log format fix
Peter Maydell:
o input: Add support for Kensington ThinkingMouse PS/2 protocol
Peter Nelson:
o input: Fix oops in gamecon
Peter Oberparleiter:
o s390: DASD driver
o s390: Character device drivers
o s390: SCLP device driver cleanup
Peter Osterlund:
o input: Add ALPS touchpad driver, driver by Neil Brown, Peter
Osterlund and Dmitry Torokhov, some fixes by Vojtech Pavlik.
o pktcdvd: make two functions static
o pktcdvd: grep-friendly function prototypes
o pktcdvd: Small documentation update
o isofs: Remove useless include
o synaptics: Remove unused struct member variable
Peter Zijlstra:
o oprofile preempt warning fixes
Phil Dibowitz:
o USB Storage: Remove MODE_XLATE flag from unusual_devs.h
o USB Storage: Remove old XLATE-only entries from unusual_devs.h
o USB Storage: unusual_devs: prolific atapi controler
o USB Storage: unusual_devs: prolific atapi controler
Philipp Gortan:
o 8139cp: support for TTTech MC322
Pierre Ossman:
o [MMC] Fix warning in wbsd
Prakash Cheemplavam:
o APIC/LAPIC hanging problems on nForce2 system
Prarit Bhargava:
o [ide] fix erroneous rq->buffer = NULL in
ide-io.c:ide_dma_timeout_retry()
Prasanna Meda:
o fork: total_forks not counted under tasklist_lock
o Add PR_GET_NAME
o readdir: return value missed in getdents64
o proc_kcore: Correct double accounting of elf_buflen
o easily tweakable comm length
Prasanna S. Panchamukhi:
o x86_64: do_general_protection() retval check
o kprobes: dont steal interrupts from vm86
Raghavendra Koushik:
o S2io: cosmetic changes
o S2io: sw bug fixes
o S2io: optimizations
o S2io: hardware fixes
o S2io: module loadable parameters
o S2io: new txd allocation
o S2io: NAPI fix
o S2io: two buffer mode
o S2io: new functions for card restart
o S2io: 2 buffer mode with copy
o S2io: modified loadable parameters
o S2io: styling
Ralf Bächle:
o Another big 6pack patch
Ram Pai:
o Simplified readahead congestion control
Randy Dunlap:
o cpqphp: reduce stack usage
o parport_pc: don't mix module parameter styles
o handle quoted module parameters
o panic_timeout: move to kernel.h
o cpumask: range check before using value
o i2c-ali1563: fix init & exit section usage
o add cpufreq info to Documentation/feature-removal-schedule.txt
o ibmasm: fix init/exit sections
o IPMI: use C99 struct inits
o i2o: fix init/exit section usage
Randy Vinson:
o ppc32: add Support for IBM 750FX and 750GX Eval Boards
Richard Purdie:
o MTD SharpSL NAND driver: Calculate partitions sizes at runtime
o [ARM PATCH] 2370/1: Add common Sharp SCOOP driver code
o [ARM PATCH] 2371/1: PXA: Add machine support for the Sharp SL-C7xx
series of PDAs
o [ARM PATCH] 2366/1: PXA: Add machine type detection for the Sharp
SL-C7xx series
Rik van Riel:
o vmscan: count writeback pages in nr_scanned
Robert Love:
o add class_device to miscdevice
o sched: no need to recalculate rq
Robert Olsson:
o [IPV4]: FIB cleanup, fib_find_alias()
o [IPV4]: FIB cleanup, fib_detect_death()
Robin Holt:
o Hold BKL for shorter period in generic_shutdown_super()
Roger Luethi:
o via-rhine: WOL band-aid
Roland Dreier:
o [INFINIBAND]: Add core InfiniBand support (public headers)
o [INFINIBAND]: Add core InfiniBand support
o [INFINIBAND]: Hook up drivers/infiniband
o [INFINIBAND]: Add InfiniBand MAD (management datagram) support
(public headers)
o [INFINIBAND]: Add InfiniBand MAD (management datagram) support
o [INFINIBAND]: Add InfiniBand MAD (management datagram) support
(private headers)
o [INFINIBAND]: Add InfiniBand MAD SMI support
o [INFINIBAND]: Add InfiniBand SA (Subnet Administration) query
support
o [INFINIBAND]: Add Mellanox HCA low-level driver
o [INFINIBAND]: Add Mellanox HCA low-level driver (midlayer
interface)
o [INFINIBAND]: Add Mellanox HCA low-level driver (FW commands)
o [INFINIBAND]: Add Mellanox HCA low-level driver (EQ)
o [INFINIBAND]: Add Mellanox HCA low-level driver (initialization)
o [INFINIBAND]: Add Mellanox HCA low-level driver (QP/CQ)
o [INFINIBAND]: Add Mellanox HCA low-level driver (last bits)
o [INFINIBAND]: Add Mellanox HCA low-level driver (MAD)
o [INFINIBAND]: IPoIB IPv4 multicast
o [INFINIBAND]: IPoIB IPv6 support
o [INFINIBAND]: Add IPoIB (IP-over-InfiniBand) driver
o [INFINIBAND]: Add IPoIB multicast and partition code
o [INFINIBAND]: Add IPoIB userspace MAD support
o [INFINIBAND]: Document InfiniBand ioctl use
o [INFINIBAND]: Add InfiniBand Documentation files
o [INFINIBAND]: InfiniBand MAINTAINERS entry
o Export get_sb_pseudo()
Roland McGrath:
o fix stop signal race
o move group_exit flag into signal_struct.flags word
o fix ptracer death race yielding bogus BUG_ON
o move waitchld_exit from task_struct to signal_struct
o task_struct.exit_state usage
o fix __ptrace_unlink TASK_TRACED recovery for real parent
o let SIGKILL wake TASK_TRACED
o don't let PTRACE_EVENT_EXIT stop hold up SIGKILL
Rolf Eike Beer:
o PCI Hotplug: ibmphp_core.c: coding style
o PCI Hotplug: ibmphp_core.c: useless casts
o PCI Hotplug: Remove unneeded kmalloc casts from ibmphp_pci.c
o PCI Hotplug: use PCI_DEVFN in ibmphp_pci.c
o PCI Hotplug: don't check pointer before kalling kfree in
ibmphp_pci.c
Roman Zippel:
o drm: fix Kconfig dependency
Ron Murray:
o CS461x gameport code isn't being included in build
Ronald Bultje:
o zr36067 driver - correct jpeg app/com markers
o zr36067 driver - ppc/be port
o zr36067 driver - reduce stack size usage
Rudolf Marek:
o I2C: vid version detection fix
Russell King:
o [ARM] Add DMA mmap() support
o [ARM] Add CLCD driver mmap method and callbacks
o [ARM] Add missing end of comment
o [ARM] Update Integrator RTC driver
o [ARM] Remove static mapping for RTC on Integrator/AP
o [ARM] Add DMA mmap support for SA1100/PXA framebuffer drivers
o [MMC] Fix UNSTUFF_BITS
o [ARM] Swap DOMAIN_USER and DOMAIN_KERNEL indicies
o [ARm] Silence a couple of compiler warnings
o [ARM] Fix some pointer/integer conversion warnings for RiscPC
o [MMC] Remove deprecated data->req
o typeof(dev->power.saved_state)
o [ARM] Fix slab corruption issues triggered with pud_t integration
o [ARM] Quieten compiler warnings, etc with ARM set_pmd()
o [ARM] Update mach-types file
o [ARM] Add basic SMP support
o [MMC] Remove linux/blkdev.h include
o [ARM] Ensure we do not remap pages outside the allocated range
o [ARM] Minor white space cleanup
o [ARM] Rehash initial kernel setup code
o [ARM] Move common CPU initialisation into head.S
o [ARM] Add missing nodemask.h includes
Rusty Russell:
o ipt_ECN corrupt checksum fix
o Fix proc removal in ip_conntrack_standalone
o Fix cleanup path when sysctl registration fails
o netfilter: fix return values of ipt_recent checkentry
o netfilter: Fix ip_conntrack_proto_sctp exit on sysctl fail
o netfilter: Fix ip_ct_selective_cleanup(), and rename
ip_ct_iterate_cleanup()
o netfilter: Add comment above remove_expectations in
destroy_conntrack()
o netfilter: Remove IPCHAINS and IPFWADM compatibility
o netfilter: Remove copy_to_user Warnings in Netfilter
o netfilter: Fix cleanup in ipt_recent should ipt_registrater_match
error
o ipt_REJECT Target nonlinear fixes
o When ipt_ECN needs TCP, check it is not inverted
o Remove NAT to multiple ranges
o ip_conntrack_alter_reply doesn't need to loop
o Don't try too hard to NAT to unique tuple
o Remove do_extra_mangle: double NAT on LOCAL_OUT
o Warn when old code would have done extra mangling
o Remove Randomness in Selecting NAT IP Address
o Clean up the kmod handling code in iptables.c
o Steal a Character To Create a Revision Number
o iptables revision getsockopt
o Add bitops to ipt_MARK without breaking compatbility
o Multiport revision with port ranges (replaces "mport")
o Conntrack Hash Allocation using __get_free_pages
o Fix for UDP and TCP NAT on nonlinear skbs
o Fix for NAT core on nonlinear skbs
o ftp nonlinear packet fix
o More ECN Fixes: make writable before writing
o sys_sched_setaffinity() on UP should fail for non-zero CPUs
o Remove EXPORT_SYMBOL_NOVERS
o Catch module parameter parsing failures
Sam Ravnborg:
o kbuild: drop use of /usr/bin/env in top-level Makefile
o kbuild: skip localversion files with '~' anywhere in their name
o kbuild: Use -isystem `gcc --print-file-name=include`
Serge Hallyn:
o properly split capset_check+capset_set
o capset returns -EPERM when pid==current->pid
o split bprm_apply_creds into two functions
o merge *_vm_enough_memory()s into a common helper
Shaun Jackman:
o Multicast filtering for tun.c
Stas Sergeev:
o fix cdrom autoclose
Stefan Dirsch:
o drm: in-correct locking in intel drms
o drm: Use wbinvd macro instead of assembly for it,
Stefan Knoblich:
o [libata] add #include (fixes 2.4 alpha build)
Steffen Klassert:
o 3c59x: use netdev_priv
o 3c59x: Make use of generic_mii_ioctl
o 3c59x: support more ethtool_ops
Stephen C. Tweedie:
o ext3: cleanup handling of aborted transactions
o ext3: handle attempted delete of bitmap blocks
o ext3: handle attempted double-delete of metadata
Stephen D. Smalley:
o SELinux: regenerate SELinux module headers
o SELinux: update selinux_task_setscheduler
o SELinux: audit task comm if exe cannot be determined
o SELinux: add dynamic context transition support to SELinux
o SELinux: enhance SELinux control of executable mappings
o SELinux: add member node to selinuxfs
o SELinux: eliminate unaligned accesses by policy loading code
Stephen Hemminger:
o r8169: use module_param
o r8169: use netdev_priv
o via-rhine: use module_param
o via-rhine: free_ring should be static
o via-velocity: get rid of unused global
o hp100: use netdev_priv (rev 2)
o hp100: use inline for comple usage of dev->priv
o tlan: use netdev_priv (rev 2)
o tlan: get rid of unneeded global vars (rev 2)
o tlan: make inline's static (rev2)
o tlan: enable faster hash function
o xircom_tulip_cb: convert to using module_param
o sk98: no explicit module ref counting needed
o sk98: local variable can be constant
o sk98: /proc interface related changes
o sk98: use netdev_priv
o sk98: use module_param
o sk98: basic ethtool support
o sk98: ethtool phy support
o sk98: ethtool pause param support
o [TCP]: Efficient port randomization (rev 3)
o via-velocity: convert to module_param
Stephen Rothwell:
o ppc64: consolidate cache sizing variables
o ppc64: remove the page table size from the naca
o ppc64: remove interrupt_controller from naca
o ppc64: remove /proc/ppc64/{naca,paca/xx}
o ppc64: remove the paca pointer form the naca
o ppc64: remove serialPortAddr from the naca
o ppc64: remove debug_switch from the naca
o ppc64: remove the naca from all but iSeries
o ppc64: use xPMCRegsInUse
o ppc64: move the lppaca defining header file
o ppc64: remove StudlyCaps from lppaca structure
o ppc64: use c99 initializers
o ppc64: tidy up the htab_data structure
o noone uses HAVE_ARCH_SI_CODES or HAVE_ARCH_SIGEVENT_T
Steven J. Hill:
o I2C patch from MIPS tree
Steven Pratt:
o Simplified readahead
Tejun Heo:
o module sysfs: make module.mkobj inline
o module sysfs: expand module_attribute methods
o module sysfs: sections attr reimplemented using attr group
o module sysfs: module parameters reimplemented using attr group
Thayne Harbaugh:
o initramfs: unprivileged image creation
Theodore Y. Ts'o:
o ext3 htree telldir() fix
Thomas Gleixner:
o PCI: Fix debug statement
o Lock initializer unifying: ALPHA
o Lock initializer unifying: IA64
o Lock initializer unifying: M32R
o Lock initializer unifying: MIPS
o Lock initializer unifying: Misc drivers
o Lock initializer unifying: Block devices
o Lock initializer unifying: DRM
o Lock initializer unifying: character devices
o Lock initializer unifying: RIO
o Lock initializer unifying: Firewire
o Lock initializer unifying: ISDN
o Lock initializer unifying: Raid
o Lock initializer unifying: media drivers
o Lock initializer unifying: drivers/serial
o Lock initializer unifying: Filesystems
o Lock initializer unifying: Video
o Lock initializer unifying: sound
o Lock initializer cleanup (common headers)
o Lock initializer cleanup (character devices)
o Lock initializer cleanup (Core)
o ppc: fix idle with interrupts disabled
o ppc: remove duplicate define
o ppc; include missing header
Thomas Graf:
o [RTNETLINK]: Link attribute modification by interface name
o [PKT_SCHED]: Validate policer configuration TLVs
o [PKT_SCHED]: dsmark should ignore ECN bits
Thomas Winischhofer:
o fbdev: SiS framebuffer driver update 1.7.17
Tom Rini:
o IBM EMAC Kconfig changes
o IBM EMAC Kconfig changes: Add 'select CRC32'
o ppc32: Switch to KBUILD_DEFCONFIG
Tony Lindgren:
o [ARM PATCH] 2332/1: OMAP update 1/2: Include files
o [ARM PATCH] 2328/1: ARM Kconfig updates for OMAP leds
o [ARM PATCH] 2329/1: Update Kconfig for OMAP processor options
o [ARM PATCH] 2336/1: OMAP update 1/2: Arch files, take 2
Tony Luck:
o [IA64] irq_ia64.c typo s/_IA64_REG_AR_SP/_IA64_REG_SP/
o Document "new" ia64 maintainer
Trond Myklebust:
o RPC: Convert rpciod into a work queue for greater flexibility
o RPC: Remove the rpc_queue_lock global spinlock. Replace it with
per-rpc_queue spinlocks.
o RPC: Fix a bug in rpc_killall_tasks()
o RPC: More aggressive RPC debugging code
o RPC: Add missing calls to flush_dcache_page() in net/sunrpc/xdr.c
o NFS: Make readdirplus create dentries on the fly when we're running
through the directory.
o NFS: The fact that readdirplus calls now create dentries from
within readdir calls renders nfs_cached_lookup() obsolete.
o NFS: Change rpc_ops->create() to take a dentry argument rather than
a qstr.
o NFSv4: Make nfs4_do_open() take a dentry argument
o NFSv4: setattr, close and open_downgrade should use the
state_owner's credentials when they are available.
o NFSv4: Convert the NFSv4 close and open_downgrade operations to use
asynchronous RPC calls.
o RPCSEC_GSS: When the gss code notices that a cred has expired, mark
the cred containing the context non-uptodate, triggering creation
of a new context.
o RPC: Instead of setting a flag (RPCAUTH_CRED_DEAD) in the cred to
indicate failure of an upcall to get a gss context for that cred,
set the status of waiting tasks to indicate failure.
o RPC: The RPCAUTH_CRED_DEAD flag had been unused for some time
before I unwisely revived it for use with the gss code. Having
removed that use from the gss code, it's time to remove all
references to it.
o RPCSEC_GSS: Miscellaneous cleanup of auth_gss.c: we're passing
something as a void * when we know perfectly well what it is. And
we're passing some arguments that we don't actually use.
o Subject: [PATCH] NFS: Sync NFS writes still use kmalloc
o NFSv2/v3/v4: ESTALE should not be a permanent condition on
directories
o VFS: Avoid dentry aliasing problems in filesystems like NFS, where
inodes may be marked as stale in one instance (causing the dentry
to be dropped) then re-enabled in the next instance.
o RPC: Optimize away unnecessary del_timer_sync() operations, when we
know there are no pending timers.
o VFS: Remove LOCK_USE_CLNT. It should no longer be necessary
o NFS: when we mount with the "nolock" flag we need to use local
locking
o NFS: Fix dentry refcount accounting error which causes unnecessary
sillyrenames when renaming to an existing file.
o Subject: [PATCH] NFS: short write warning
o Subject: [PATCH] NFS: report return code on GETATTR and SETATTR
o Subject: [PATCH] RPC: display XIDs in host order
o Subject: [PATCH] NFS: Use sizeof() instead of C macro
o Subject: [PATCH] NFS: better handling of short writes in direct
write path
o Subject: [PATCH] NFS: Direct write path allocates nfs_write_data on
the stack
o Subject: [PATCH] NFS: Direct read path allocates nfs_read_data on
the stack
o Subject: [PATCH] NFS: Use parallel read operations to do direct
read requests
o Subject: [PATCH] NFS: Direct reads and writes need to flush dirty
cache pages
o Subject: [PATCH] NFS: use attribute timeout instead of "noac" mount
option
o NFS: Ensure ACCESS caches are invalidated together with the
attribute cache.
o Subject: [PATCH] NFS: incorrect "df" results
o RPC: call_verify Don't label all retries as "server seeing
garbage".
Tvrtko A. Ursulin:
o smb_file_open() retval fix
Ursula Braun-Krahl:
o s390: Network device driver patches
Vasia Pupkin:
o Fix kernel/timer.c comment typo
Venkatesh Pallipadi:
o x86: remove data-header and code overlap in boot/setup.S
Vincent Hanquez:
o kill one "if (X) vfree(X)" usage
Vivek Goyal:
o Secondary cpus boot-up for non default location built kernels
Vladimir Saveliev:
o Fix of quota deadlock on pagelock: reiserfs
Vojtech Pavlik:
o input: Some HID devices have problems returning the HID class
descriptor
o input: Add AT-compatible rawmode generation for ARM
o input: More IOWarrior blacklist entries in hid.c, rearranging the
blacklist back to alphabetic order.
o input: Tidy up & fix the hid-input.c driver. Dual-wheel A4 mice
don't report the phantom button anymore, D-Pads are mapped to
Hat-switches, debug can print HID->Input mappings, more mappings
added, devices with reports larger than MaxPacketSize work again.
o input: Fix ssize_t prototype mismatch in psmouse and atkbd
o Input: i8042 ACPI enumeration - add PNP IDs found in AMD64 laptops
o input: Increase ACK timeouts in libps2 in case the RESET_BAT
command is used
Werner Almesberger:
o prio_tree: roll call to prio_tree_first into prio_tree_next
o prio_tree: generalization
o prio_tree: move general code from mm/ to lib/
William Lee Irwin III:
o sparc32: fix hypersparc dvma
o sparc32: sun4d update
o sparc32: fix initrd memcpy problem
o sparc32: fix missing return value for svr4_setcontext()
o sparc32: arch/sparc/kernel/pcic.c iomem annotations
o sparc32: unused variable in sunsu.c
o sparc32: fix sbus rtc warnings
o sparc32: fix missing handling for VM fault codes
o sparc32: fix incomplete irqreturn_t sweep in
include/asm-sparc/floppy.h
o sparc32: remove conflicting definition of _exit()
o sparc32: fix blank screen problem in cg6.c
o fix arch/x86_64/ia32/syscall32.c misdeclared pud variable
o convert FRV to use remap_pfn_range
o invalidate_inodes speedup
o hugetlbfs MAINTAINERS update
o gen_init_cpio symlink, pipe and socket support
o Replace 'numnodes' with 'node_online_map' - arch-independent
o vm: remove remap_page_range() completely
o oss: AC97 quirk facility
o remove CT_TO_SECS()/CT_TO_USECS()
o kill quota_v2.c printk() of size_t warning
o silence numerous size_t warnings in drivers/acpi/processor_idle.c
o make IRDA string tables conditional on CONFIG_IRDA_DEBUG
o fix unresolved MTD symbols in scx200_docflash.c
o fix module_param() type mismatch in drivers/char/n_hdlc.c
Xose Vazquez Perez:
o x86_64: Fix EM64T config description
Yoichi Yuasa:
o mips: remove duplicate _end entry
o mtd: added NEC uPD29F064115 support
o mips: fixed build error about NEC VR4100 series
Yoshinori Sato:
o H8/300 new systemcall support
Zou Nanhai:
o compat: sigtimedwait
Zwane Mwaikambo:
o Cyrix MII cpuid returns stale %ecx
o NX: Triple fault with 4k kernel mappings and PAE
o Intel thermal monitor for x86_64
o NX: Fix noexec kernel parameter
o fix alt-sysrq deadlock
o Remove RCU abuse in cpu_idle()
o ppc64: Move hotplug cpu functions to smp_ops
o x86_64: Notify user of MCE events
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
@ 2005-01-12 7:07 ` Keith Owens
2005-01-12 7:32 ` Markus Trippelsdorf
` (7 subsequent siblings)
8 siblings, 0 replies; 44+ messages in thread
From: Keith Owens @ 2005-01-12 7:07 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Kernel Mailing List, linux-ia64
On Tue, 11 Jan 2005 21:09:21 -0800 (PST),
Linus Torvalds <torvalds@osdl.org> wrote:
>Ok, the big merges after 2.6.10 are hopefully over, and 2.6.11-rc1 is out
>there.
Export pcibios_resource_to_bus in ia64 to match other architectures.
Signed-off-by: Keith Owens <kaos@sgi.com>
Index: linux/arch/ia64/pci/pci.c
===================================================================
--- linux.orig/arch/ia64/pci/pci.c 2005-01-12 17:07:23.000000000 +1100
+++ linux/arch/ia64/pci/pci.c 2005-01-12 18:04:12.000000000 +1100
@@ -367,6 +367,7 @@ void pcibios_resource_to_bus(struct pci_
region->start = res->start - offset;
region->end = res->end - offset;
}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
void pcibios_bus_to_resource(struct pci_dev *dev,
struct resource *res, struct pci_bus_region *region)
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
2005-01-12 7:07 ` Keith Owens
@ 2005-01-12 7:32 ` Markus Trippelsdorf
2005-01-13 22:37 ` Linux 2.6.11-rc1 (ACPI related problems) Hanspeter Kunz
2005-01-12 8:24 ` Linux 2.6.11-rc1 Brice Goglin
` (6 subsequent siblings)
8 siblings, 1 reply; 44+ messages in thread
From: Markus Trippelsdorf @ 2005-01-12 7:32 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Kernel Mailing List
I see these errors in dmesg on an AMD_64:
ACPI: Subsystem revision 20041210
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI-1138: *** Error: Method execution failed [\MCTH] (Node
ffff81003ff8ecc0), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\OSFL] (Node
ffff81003ff8ed00), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0._S3D]
(Node ffff81003ff82140), AE_AML_BUFFER_LIMIT
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0._S3D]
(Node ffff81003ff82140), AE_AML_BUFFER_LIMIT
But the system is running fine AFAICT.
__
Markus
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
2005-01-12 7:07 ` Keith Owens
2005-01-12 7:32 ` Markus Trippelsdorf
@ 2005-01-12 8:24 ` Brice Goglin
2005-01-12 9:20 ` Tino Keitel
2005-01-12 15:50 ` Linus Torvalds
2005-01-12 15:24 ` Sergey S. Kostyliov
` (5 subsequent siblings)
8 siblings, 2 replies; 44+ messages in thread
From: Brice Goglin @ 2005-01-12 8:24 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Kernel Mailing List
Linus Torvalds a écrit :
> Ok, the big merges after 2.6.10 are hopefully over, and 2.6.11-rc1 is out
> there.
>
> Lots of small cleanups, although that inevitable qlogic firmware update
> makes pretty much _everything_ look small in comparison.
>
> SCSI, USB, IDE, x86-64, FRV, PPC64, ARM, input layer, ALSA, network
> drivers, pcmcia, knfsd, ACPI, sparse cleanups... You name it. Lots of
> (mostly) small updates all over the landscape.
Hi Linus,
setkeycodes does not work anymore on my Compaq Evo N600c running a Debian testing.
puligny:~# setkeycodes e023 150 e01e 155 e01a 217 e01f 157
KDSETKEYCODE: No such device
failed to set scancode a3 to keycode 150
Of course, the old warnings are back when I pressed one of the multimedia keys :
atkbd.c: Unknown key pressed (translated set 2, code 0xa3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e023 <keycode>' to make it known.
Am I supposed to do something to get it back on 2.6.11-rc1 ?
Regards
Brice
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 8:24 ` Linux 2.6.11-rc1 Brice Goglin
@ 2005-01-12 9:20 ` Tino Keitel
2005-01-12 9:38 ` Brice Goglin
2005-01-12 15:50 ` Linus Torvalds
1 sibling, 1 reply; 44+ messages in thread
From: Tino Keitel @ 2005-01-12 9:20 UTC (permalink / raw)
To: Kernel Mailing List
On Wed, Jan 12, 2005 at 09:24:27 +0100, Brice Goglin wrote:
[...]
> Hi Linus,
>
> setkeycodes does not work anymore on my Compaq Evo N600c running a Debian
> testing.
>
> puligny:~# setkeycodes e023 150 e01e 155 e01a 217 e01f 157
> KDSETKEYCODE: No such device
> failed to set scancode a3 to keycode 150
Did this work for you with 2.6.10? I currently use 2.6.9-mm1 and I get
the same error on Debian Sid.
Regards,
Tino
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 9:20 ` Tino Keitel
@ 2005-01-12 9:38 ` Brice Goglin
2005-01-12 14:13 ` Dmitry Torokhov
0 siblings, 1 reply; 44+ messages in thread
From: Brice Goglin @ 2005-01-12 9:38 UTC (permalink / raw)
To: Tino Keitel; +Cc: Kernel Mailing List
>>puligny:~# setkeycodes e023 150 e01e 155 e01a 217 e01f 157
>>KDSETKEYCODE: No such device
>>failed to set scancode a3 to keycode 150
>
>
> Did this work for you with 2.6.10? I currently use 2.6.9-mm1 and I get
> the same error on Debian Sid.
>
> Regards,
> Tino
Yes, works on 2.6.10 and even 2.6.10-mm3.
Brice
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 9:38 ` Brice Goglin
@ 2005-01-12 14:13 ` Dmitry Torokhov
2005-01-12 14:35 ` Brice Goglin
0 siblings, 1 reply; 44+ messages in thread
From: Dmitry Torokhov @ 2005-01-12 14:13 UTC (permalink / raw)
To: Brice.Goglin; +Cc: Tino Keitel, Kernel Mailing List
On Wed, 12 Jan 2005 10:38:24 +0100, Brice Goglin
<Brice.Goglin@ens-lyon.fr> wrote:
> >>puligny:~# setkeycodes e023 150 e01e 155 e01a 217 e01f 157
> >>KDSETKEYCODE: No such device
> >>failed to set scancode a3 to keycode 150
> >
> >
> > Did this work for you with 2.6.10? I currently use 2.6.9-mm1 and I get
> > the same error on Debian Sid.
> >
> > Regards,
> > Tino
>
> Yes, works on 2.6.10 and even 2.6.10-mm3.
>
Please try the patch from here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=110430679525030&w=2
Vojtech said he'd push it and some more stuff to Linus...
--
Dmitry
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 14:13 ` Dmitry Torokhov
@ 2005-01-12 14:35 ` Brice Goglin
0 siblings, 0 replies; 44+ messages in thread
From: Brice Goglin @ 2005-01-12 14:35 UTC (permalink / raw)
To: dtor_core; +Cc: Kernel Mailing List
Dmitry Torokhov a écrit :
> On Wed, 12 Jan 2005 10:38:24 +0100, Brice Goglin
>>>>puligny:~# setkeycodes e023 150 e01e 155 e01a 217 e01f 157
>>>>KDSETKEYCODE: No such device
>>>>failed to set scancode a3 to keycode 150
>
> Please try the patch from here:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=110430679525030&w=2
>
> Vojtech said he'd push it and some more stuff to Linus...
Yes it works. Thanks.
Brice
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
` (2 preceding siblings ...)
2005-01-12 8:24 ` Linux 2.6.11-rc1 Brice Goglin
@ 2005-01-12 15:24 ` Sergey S. Kostyliov
2005-01-12 15:32 ` Linus Torvalds
2005-01-12 19:06 ` Linux 2.6.11-rc1 -- usb_storage and Genesys Jan De Luyck
` (4 subsequent siblings)
8 siblings, 1 reply; 44+ messages in thread
From: Sergey S. Kostyliov @ 2005-01-12 15:24 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 19755 bytes --]
On Wednesday 12 January 2005 08:09, Linus Torvalds wrote:
> Ok, the big merges after 2.6.10 are hopefully over, and 2.6.11-rc1 is out
> there.
2.6.10-rc1 hangs at boot stage for my dual opteron machine
There is no any printk() output (only grub messages)
--------------------------------- cut -----------------------------------------
Booting '2.6.11-rc1'
root (hd0,1)
Filesystem type is reiserfs, partition type 0x83
kernel /boot/vmlinuz-2.6.11-rc1 root=0802 elevator=deadline console=ttyS0,11520
0 console=tty0
[Linux-bzImage, setup=0xc00, size=0x17948e]
-------------------------------------------------------------------------------
Thats all.
.config is below. `dmidecode' and `lspci' output is attached.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc1
# Wed Jan 12 17:51:13 2005
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HOTPLUG=y
# CONFIG_KOBJECT_UEVENT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_SCHED_SMT is not set
CONFIG_K8_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_DISCONTIGMEM=y
CONFIG_NUMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NR_CPUS=2
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_UNORDERED_IO is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PC-card bridges
#
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_IDEDISK is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_KPROBES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
--
Sergey S. Kostyliov <rathamahata@ehouse.ru>
Jabber ID: rathamahata@jabber.org
[-- Attachment #2: dmidecode --]
[-- Type: text/plain, Size: 17562 bytes --]
# dmidecode 2.5
SMBIOS 2.3 present.
59 structures occupying 2383 bytes.
Table at 0x000F9300.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: American Megatrends Inc.
Version: 080010
Release Date: 04/30/2004
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: PCI PME#
Handle 0x0002
DMI type 2, 8 bytes.
Base Board Information
Manufacturer: To be filled by O.E.M.
Product Name: To be filled by O.E.M.
Version: To be filled by O.E.M.
Serial Number: To be filled by O.E.M.
Handle 0x0003
DMI type 3, 17 bytes.
Chassis Information
Manufacturer: To Be Filled By O.E.M.
Type: Desktop
Lock: Not Present
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0004
DMI type 4, 35 bytes.
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Opteron
Manufacturer: AMD
ID: 00 00 00 00 00 00 00 00
Signature: Family 0, Model 0, Stepping 0
Flags: None
Version: AMD Opteron(tm) Processor 246
Voltage: 3.3 V 2.9 V
External Clock: 200 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Socket 940
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0005
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 4-way Set-associative
Handle 0x0006
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0007
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L3-Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Unknown
Location: Internal
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0008
DMI type 4, 35 bytes.
Processor Information
Socket Designation: CPU 2
Type: Central Processor
Family: Opteron
Manufacturer: AMD
ID: 00 00 00 00 00 00 00 00
Signature: Family 0, Model 0, Stepping 0
Flags: None
Version: AMD Opteron(tm) Processor 246
Voltage: 3.3 V 2.9 V
External Clock: 200 MHz
Max Speed: 2000 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Socket 940
L1 Cache Handle: 0x0009
L2 Cache Handle: 0x000A
L3 Cache Handle: 0x000B
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0009
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 4-way Set-associative
Handle 0x000A
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x000B
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L3-Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Unknown
Location: Internal
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x000D
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000E
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J4A1
Internal Connector Type: None
External Reference Designator: LPT 1
External Connector Type: DB-25 male
Port Type: Parallel Port ECP/EPP
Handle 0x0011
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: None
External Reference Designator: COM A
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0012
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Mic In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0013
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Line In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x0014
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J6B1 - AUX IN
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0015
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J6B2 - CDIN
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0016
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J6J2 - PRI IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0017
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J6J1 - SEC IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0018
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J4J1 - FLOPPY
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0019
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J9H1 - FRONT PNL
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J1B1 - CHASSIS REAR FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J2F1 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J8B4 - FRONT FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001D
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J9G2 - FNT USB
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001E
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J6C3 - FP AUD
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001F
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J9G1 - CONFIG
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0020
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J8C1 - SCSI LED
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0021
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J9J2 - INTRUDER
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0022
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J9G4 - ITP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0023
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: J2H1 - MAIN POWER
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0024
DMI type 9, 13 bytes.
System Slot Information
Designation: AGP
Type: 32-bit AGP 4x
Current Usage: Available
Length: Short
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0025
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0026
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0027
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: In Use
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0028
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI4
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 4
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0029
DMI type 10, 6 bytes.
On Board Device Information
Type: Video
Status: Enabled
Description: To Be Filled By O.E.M.
Handle 0x002A
DMI type 13, 22 bytes.
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x002B
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 12 GB
Error Information Handle: Not Provided
Number Of Devices: 6
Handle 0x002C
DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x002B
Partition Width: 0
Handle 0x002D
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x002B
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer0
Serial Number: SerNum0
Asset Tag: AssetTagNum0
Part Number: PartNum0
Handle 0x002E
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002D
Memory Array Mapped Address Handle: 0x002C
Partition Row Position: 1
Handle 0x002F
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x002B
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK1
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer1
Serial Number: SerNum1
Asset Tag: AssetTagNum1
Part Number: PartNum1
Handle 0x0030
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002F
Memory Array Mapped Address Handle: 0x002C
Partition Row Position: 1
Handle 0x0031
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x002B
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM2
Bank Locator: BANK2
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Manufacturer2
Serial Number: SerNum2
Asset Tag: AssetTagNum2
Part Number: PartNum2
Handle 0x0032
DMI type 126, 19 bytes.
Inactive
Handle 0x0033
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x002B
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM3
Bank Locator: BANK3
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Manufacturer3
Serial Number: SerNum3
Asset Tag: AssetTagNum3
Part Number: PartNum3
Handle 0x0034
DMI type 126, 19 bytes.
Inactive
Handle 0x0035
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x002B
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM4
Bank Locator: BANK4
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer4
Serial Number: SerNum4
Asset Tag: AssetTagNum4
Part Number: PartNum4
Handle 0x0036
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000BFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0035
Memory Array Mapped Address Handle: 0x002C
Partition Row Position: 1
Handle 0x0037
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x002B
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM5
Bank Locator: BANK5
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer5
Serial Number: SerNum5
Asset Tag: AssetTagNum5
Part Number: PartNum5
Handle 0x0038
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x000C0000000
Ending Address: 0x000FFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0037
Memory Array Mapped Address Handle: 0x002C
Partition Row Position: 1
Handle 0x0039
DMI type 32, 20 bytes.
System Boot Information
Status: No errors detected
Handle 0x003A
DMI type 127, 4 bytes.
End Of Table
[-- Attachment #3: lspci -vv --]
[-- Type: text/plain, Size: 12069 bytes --]
0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000a000-0000cfff
Memory behind bridge: fca00000-feafffff
Expansion ROM at 0000a000 [disabled] [size=12K]
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [c0] #08 [0086]
Capabilities: [f0] #08 [8000]
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 LPC
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at ffa0 [size=16]
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 ACPI
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fc800000-fc9fffff
Expansion ROM at 00009000 [disabled] [size=4K]
BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] Capabilities: [b8] #08 [8000]
Capabilities: [c0] #08 [004a]
0000:00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at febfe000 (64-bit, non-prefetchable)
0000:00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=02, sec-latency=64
Memory behind bridge: fc600000-fc7fffff
Prefetchable memory behind bridge: 00000000ff500000-00000000ff500000
BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] Capabilities: [b8] #08 [8000]
0000:00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at febff000 (64-bit, non-prefetchable)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
Capabilities: [a0] #08 [2101]
Capabilities: [c0] #08 [2101]
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
Capabilities: [a0] #08 [2101]
Capabilities: [c0] #08 [2101]
0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:01:01.0 PCI bridge: IBM PCI-X to PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 10
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
Memory behind bridge: fc600000-fc7fffff
Prefetchable memory behind bridge: 00000000ff500000-00000000ff500000
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] PCI-X bridge device.
Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
: Upstream: Capacity=0, Commitment Limit=0
: Downstream: Capacity=0, Commitment Limit=0
Capabilities: [90] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 02)
Subsystem: LSI Logic / Symbios Logic MegaRAID 532 SCSI 320-2X RAID Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min), cache line size 10
Interrupt: pin A routed to IRQ 29
Region 0: Memory at ff5f0000 (32-bit, prefetchable) [size=fc770000]
Region 2: Memory at fc780000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at 00010000 [disabled]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
0000:03:03.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller
Subsystem: Intel Corp. PRO/1000 MT Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), cache line size 10
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fc980000 (32-bit, non-prefetchable) [size=fc940000]
Region 1: Memory at fc960000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 9880 [size=64]
Expansion ROM at 00020000 [disabled]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
0000:03:04.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller
Subsystem: Intel Corp. PRO/1000 MT Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), cache line size 10
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fc9e0000 (32-bit, non-prefetchable) [size=fc9a0000]
Region 1: Memory at fc9c0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 9c00 [size=64]
Expansion ROM at 00020000 [disabled]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
0000:04:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 5
Region 0: Memory at feafd000 (32-bit, non-prefetchable)
0000:04:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 5
Region 0: Memory at feafe000 (32-bit, non-prefetchable)
0000:04:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 10
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=feac0000]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 00020000 [disabled]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 15:24 ` Sergey S. Kostyliov
@ 2005-01-12 15:32 ` Linus Torvalds
2005-01-12 15:44 ` Gene Heskett
` (2 more replies)
0 siblings, 3 replies; 44+ messages in thread
From: Linus Torvalds @ 2005-01-12 15:32 UTC (permalink / raw)
To: Sergey S. Kostyliov; +Cc: Kernel Mailing List
On Wed, 12 Jan 2005, Sergey S. Kostyliov wrote:
>
> 2.6.10-rc1 hangs at boot stage for my dual opteron machine
Oops, yes. There's some recent NUMA breakage - either disable CONFIG_NUMA,
or apply the patches that Andi Kleen just posted on the mailing list (the
second option much preferred, just to verify that yes, that does fix it).
Linus
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 15:32 ` Linus Torvalds
@ 2005-01-12 15:44 ` Gene Heskett
2005-01-12 16:03 ` Sergey S. Kostyliov
2005-01-13 9:45 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Sander
2 siblings, 0 replies; 44+ messages in thread
From: Gene Heskett @ 2005-01-12 15:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Linus Torvalds, Sergey S. Kostyliov
On Wednesday 12 January 2005 10:32, Linus Torvalds wrote:
>On Wed, 12 Jan 2005, Sergey S. Kostyliov wrote:
>> 2.6.10-rc1 hangs at boot stage for my dual opteron machine
>
>Oops, yes. There's some recent NUMA breakage - either disable
> CONFIG_NUMA, or apply the patches that Andi Kleen just posted on
> the mailing list (the second option much preferred, just to verify
> that yes, that does fix it).
>
> Linus
I also have a minor breakage, I've been using the forcedeth module for
my networking, and it apparently isn't being autoloaded with this
version. However, once booted, I can insmod it, and 'service network
start' and it appears to be ok then.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.31% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attorneys please note, additions to this message
by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 8:24 ` Linux 2.6.11-rc1 Brice Goglin
2005-01-12 9:20 ` Tino Keitel
@ 2005-01-12 15:50 ` Linus Torvalds
2005-01-12 19:13 ` Vojtech Pavlik
1 sibling, 1 reply; 44+ messages in thread
From: Linus Torvalds @ 2005-01-12 15:50 UTC (permalink / raw)
To: Brice.Goglin, Andrew Morton, Vojtech Pavlik, Christoph Hellwig
Cc: Kernel Mailing List
On Wed, 12 Jan 2005, Brice Goglin wrote:
>
> setkeycodes does not work anymore on my Compaq Evo N600c running a Debian testing.
>
> puligny:~# setkeycodes e023 150 e01e 155 e01a 217 e01f 157
> KDSETKEYCODE: No such device
> failed to set scancode a3 to keycode 150
Interesting. Vojtech - does this ring any bells?
Afaik, nothing has changed in KDESTKEYCODE, the thing that comes closest
is a change to some parameter calling in the vt layer by Christoph.
Input layer?
Linus
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 15:32 ` Linus Torvalds
2005-01-12 15:44 ` Gene Heskett
@ 2005-01-12 16:03 ` Sergey S. Kostyliov
2005-01-13 9:45 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Sander
2 siblings, 0 replies; 44+ messages in thread
From: Sergey S. Kostyliov @ 2005-01-12 16:03 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Kernel Mailing List
On Wednesday 12 January 2005 18:32, Linus Torvalds wrote:
>
> On Wed, 12 Jan 2005, Sergey S. Kostyliov wrote:
> >
> > 2.6.10-rc1 hangs at boot stage for my dual opteron machine
>
> Oops, yes. There's some recent NUMA breakage - either disable CONFIG_NUMA,
> or apply the patches that Andi Kleen just posted on the mailing list (the
> second option much preferred, just to verify that yes, that does fix it).
That (numa x86_64 patchset from Andi Kleen) fixes it. Thanks for
a quick reply!
--
Sergey S. Kostyliov <rathamahata@ehouse.ru>
Jabber ID: rathamahata@jabber.org
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1 -- usb_storage and Genesys
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
` (3 preceding siblings ...)
2005-01-12 15:24 ` Sergey S. Kostyliov
@ 2005-01-12 19:06 ` Jan De Luyck
2005-01-13 5:42 ` [PATCH] contort getdents64 to pacify gcc-2.96 Adam Kropelin
` (3 subsequent siblings)
8 siblings, 0 replies; 44+ messages in thread
From: Jan De Luyck @ 2005-01-12 19:06 UTC (permalink / raw)
To: linux-kernel
Cc: Matthew Dharm, Alan Stern, USB Storage list, USB development list
On Wednesday 12 January 2005 06:09, Linus Torvalds wrote:
> Matthew Dharm:
> o USB Storage: support 'bulk32' devices
> o USB Storage: Increase Genesys delay
The Genesys increased delay in this patch causes strange issues, the USB
disconnects after a while...
I rewrote the identifier like it was previous this patch
--
if (us->pusb_dev->descriptor.idVendor == USB_VENDOR_ID_GENESYS &&
--
and it works like I expected it to...
Just a note.
Jan
--
Support your right to bare arms!
-- A message from the National Short-Sleeved Shirt Association
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 15:50 ` Linus Torvalds
@ 2005-01-12 19:13 ` Vojtech Pavlik
0 siblings, 0 replies; 44+ messages in thread
From: Vojtech Pavlik @ 2005-01-12 19:13 UTC (permalink / raw)
To: Linus Torvalds
Cc: Brice.Goglin, Andrew Morton, Christoph Hellwig, Kernel Mailing List
On Wed, Jan 12, 2005 at 07:50:13AM -0800, Linus Torvalds wrote:
>
>
> On Wed, 12 Jan 2005, Brice Goglin wrote:
> >
> > setkeycodes does not work anymore on my Compaq Evo N600c running a Debian testing.
> >
> > puligny:~# setkeycodes e023 150 e01e 155 e01a 217 e01f 157
> > KDSETKEYCODE: No such device
> > failed to set scancode a3 to keycode 150
>
> Interesting. Vojtech - does this ring any bells?
>
> Afaik, nothing has changed in KDESTKEYCODE, the thing that comes closest
> is a change to some parameter calling in the vt layer by Christoph.
>
> Input layer?
Yes, a bug in atkbd.c, sorry. This fix:
ChangeSet@1.1966.1.261, 2005-01-06 17:42:15+01:00,
dtor_core@ameritech.net
Input: atkbd - fix keycode table size initialization that got broken
by my changes that exported 'set' and other settings via sysfs.
setkeycodes should work again now.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
now in my BK tree fixes it. Another fix from Dmitry for mouse naming is
in there too (and that's all that's there ATM).
Please pull from
bk://bk://kernel.bkbits.net/vojtech/input
Thanks.
--
Vojtech Pavlik
SuSE Labs, SuSE CR
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH] contort getdents64 to pacify gcc-2.96
2005-01-13 5:42 ` [PATCH] contort getdents64 to pacify gcc-2.96 Adam Kropelin
@ 2005-01-13 3:51 ` Linus Torvalds
0 siblings, 0 replies; 44+ messages in thread
From: Linus Torvalds @ 2005-01-13 3:51 UTC (permalink / raw)
To: Adam Kropelin; +Cc: Prasanna Meda, Andrew Morton, linux-kernel
On Thu, 13 Jan 2005, Adam Kropelin wrote:
>
> ...gives gcc-2.96 indigestion:
Ouch. I wonder what triggers it. But your patch looks fine, so let's just
roll with it.
Linus
^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH] contort getdents64 to pacify gcc-2.96
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
` (4 preceding siblings ...)
2005-01-12 19:06 ` Linux 2.6.11-rc1 -- usb_storage and Genesys Jan De Luyck
@ 2005-01-13 5:42 ` Adam Kropelin
2005-01-13 3:51 ` Linus Torvalds
2005-01-13 23:15 ` Linux 2.6.11-rc1 (compile stats) John Cherry
` (2 subsequent siblings)
8 siblings, 1 reply; 44+ messages in thread
From: Adam Kropelin @ 2005-01-13 5:42 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Prasanna Meda, Andrew Morton, linux-kernel
A recent trivial fixup in sys_getdents64...
> diff -Nru a/fs/readdir.c b/fs/readdir.c
> --- a/fs/readdir.c 2005-01-12 19:22:35 -08:00
> +++ b/fs/readdir.c 2005-01-12 19:22:35 -08:00
> @@ -287,8 +287,9 @@
> lastdirent = buf.previous;
> if (lastdirent) {
> typeof(lastdirent->d_off) d_off = file->f_pos;
> - __put_user(d_off, &lastdirent->d_off);
> error = count - buf.count;
> + if (__put_user(d_off, &lastdirent->d_off))
> + error = -EFAULT;
> }
>
> out_putf:
...gives gcc-2.96 indigestion:
> fs/readdir.c: In function `sys_getdents64':
> fs/readdir.c:299: Unrecognizable insn:
> (insn 166 257 174 (parallel[
> (set (reg/v:SI 6 ebp)
> (asm_operands/v ("1: movl %%eax,0(%2)
> 2: movl %%edx,4(%2)
> 3:
> .section .fixup,"ax"
> 4: movl %3,%0
> jmp 3b
> .previous
> .section __ex_table,"a"
> .align 4
> .long 1b,4b
> .long 2b,4b
> .previous") ("=r") 0[
> (reg:DI 1 edx)
> (reg:SI 0 eax)
> (const_int -14 [0xfffffff2])
> (reg/v:SI 6 ebp)
> ]
> [
> (asm_input:DI ("A"))
> (asm_input:SI ("r"))
> (asm_input:SI ("i"))
> (asm_input:SI ("0"))
> ] ("fs/readdir.c") 291))
> (clobber (reg:QI 19 dirflag))
> (clobber (reg:QI 18 fpsr))
> (clobber (reg:QI 17 flags))
> ] ) -1 (insn_list 132 (insn_list 146 (insn_list 165 (nil))))
> (nil))
> fs/readdir.c:299: confused by earlier errors, bailing out
While upgrading to a sane gcc would be the preferred solution,
rewriting the change as follows eliminates the error for those who
cannot do so.
Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
--- linux-2.6.11-rc1.orig/fs/readdir.c Wed Jan 12 22:35:03 2005
+++ linux-2.6.11-rc1/fs/readdir.c Wed Jan 12 22:16:55 2005
@@ -287,9 +287,10 @@
lastdirent = buf.previous;
if (lastdirent) {
typeof(lastdirent->d_off) d_off = file->f_pos;
- error = count - buf.count;
+ error = -EFAULT;
if (__put_user(d_off, &lastdirent->d_off))
- error = -EFAULT;
+ goto out_putf;
+ error = count - buf.count;
}
out_putf:
^ permalink raw reply [flat|nested] 44+ messages in thread
* NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1)
2005-01-12 15:32 ` Linus Torvalds
2005-01-12 15:44 ` Gene Heskett
2005-01-12 16:03 ` Sergey S. Kostyliov
@ 2005-01-13 9:45 ` Sander
2005-01-13 10:02 ` NUMA or not on dual Opteron Raphael Jacquot
` (3 more replies)
2 siblings, 4 replies; 44+ messages in thread
From: Sander @ 2005-01-13 9:45 UTC (permalink / raw)
To: Kernel Mailing List; +Cc: Sergey S. Kostyliov
Linus Torvalds wrote (ao):
> On Wed, 12 Jan 2005, Sergey S. Kostyliov wrote:
> > 2.6.10-rc1 hangs at boot stage for my dual opteron machine
>
> Oops, yes. There's some recent NUMA breakage - either disable
> CONFIG_NUMA, or apply the patches that Andi Kleen just posted on the
> mailing list (the second option much preferred, just to verify that
> yes, that does fix it).
I was under the impression that NUMA is useful on > 2-way systems only.
Is this true, and if not, under what circumstances is NUMA useful on
2-way Opteron systems?
In other words: why should one want NUMA to be enabled or disabled for
dual Opteron?
Thanks in advance.
--
Humilis IT Services and Solutions
http://www.humilis.net
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron
2005-01-13 9:45 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Sander
@ 2005-01-13 10:02 ` Raphael Jacquot
2005-01-13 17:07 ` Justin M. Forbes
2005-01-13 19:40 ` Andi Kleen
2005-01-13 15:36 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Alan Cox
` (2 subsequent siblings)
3 siblings, 2 replies; 44+ messages in thread
From: Raphael Jacquot @ 2005-01-13 10:02 UTC (permalink / raw)
To: sander; +Cc: Kernel Mailing List, Sergey S. Kostyliov
Sander wrote:
> Linus Torvalds wrote (ao):
>
>>On Wed, 12 Jan 2005, Sergey S. Kostyliov wrote:
>>
>>>2.6.10-rc1 hangs at boot stage for my dual opteron machine
>>
>>Oops, yes. There's some recent NUMA breakage - either disable
>>CONFIG_NUMA, or apply the patches that Andi Kleen just posted on the
>>mailing list (the second option much preferred, just to verify that
>>yes, that does fix it).
>
>
> I was under the impression that NUMA is useful on > 2-way systems only.
> Is this true, and if not, under what circumstances is NUMA useful on
> 2-way Opteron systems?
>
> In other words: why should one want NUMA to be enabled or disabled for
> dual Opteron?
>
> Thanks in advance.
>
Numa needs to be enabled on bi-opteron systems because each processor
controls part of the memory. unlike the intel memory architecture, where
processors share the same bus to access memory.
Numa in opteron systems is thus required to allow sharing of memory .
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1)
2005-01-13 9:45 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Sander
2005-01-13 10:02 ` NUMA or not on dual Opteron Raphael Jacquot
@ 2005-01-13 15:36 ` Alan Cox
2005-01-13 19:38 ` NUMA or not on dual Opteron Andi Kleen
2005-01-13 21:24 ` Bernd Eckenfels
3 siblings, 0 replies; 44+ messages in thread
From: Alan Cox @ 2005-01-13 15:36 UTC (permalink / raw)
To: sander; +Cc: Linux Kernel Mailing List, Sergey S. Kostyliov
On Iau, 2005-01-13 at 09:45, Sander wrote:
> In other words: why should one want NUMA to be enabled or disabled for
> dual Opteron?
When it makes it faster - which for me with builds and stuff seems ot be
true of a dual Opteron
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron
2005-01-13 10:02 ` NUMA or not on dual Opteron Raphael Jacquot
@ 2005-01-13 17:07 ` Justin M. Forbes
2005-01-13 19:43 ` Andi Kleen
2005-01-13 19:40 ` Andi Kleen
1 sibling, 1 reply; 44+ messages in thread
From: Justin M. Forbes @ 2005-01-13 17:07 UTC (permalink / raw)
To: Raphael Jacquot; +Cc: sander, Kernel Mailing List, Sergey S. Kostyliov
On Thu, Jan 13, 2005 at 11:02:19AM +0100, Raphael Jacquot wrote:
> >I was under the impression that NUMA is useful on > 2-way systems only.
> >Is this true, and if not, under what circumstances is NUMA useful on
> >2-way Opteron systems?
> >
> >In other words: why should one want NUMA to be enabled or disabled for
> >dual Opteron?
> >
> >Thanks in advance.
> >
>
> Numa needs to be enabled on bi-opteron systems because each processor
> controls part of the memory. unlike the intel memory architecture, where
> processors share the same bus to access memory.
> Numa in opteron systems is thus required to allow sharing of memory .
This is somewhat true. There are 2 types of dual opteron boards. Those in
the $200 US range only have one memory bank, which is attached to CPU0.
They operate as a single node, and may perform better with numa turned off.
Those in the $400+ range tend to have one bank per CPU and will certainly
perform better with numa on. They do usually have a bios option to
interleave the nodes which would show up as a single node, and probably
perform better with numa turned off, but a better solution is to turn off
the node interleave in bios and run the kernel with numa support.
Basically if you have 2 CPUs and only one memory bank, maybe turning numa
off will give better performance, but if you have one memory bank per CPU
numa should be on.
Justin
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron
2005-01-13 9:45 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Sander
2005-01-13 10:02 ` NUMA or not on dual Opteron Raphael Jacquot
2005-01-13 15:36 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Alan Cox
@ 2005-01-13 19:38 ` Andi Kleen
2005-01-15 23:42 ` Sander
2005-01-13 21:24 ` Bernd Eckenfels
3 siblings, 1 reply; 44+ messages in thread
From: Andi Kleen @ 2005-01-13 19:38 UTC (permalink / raw)
To: sander; +Cc: Sergey S. Kostyliov, linux-kernel
Sander <sander@humilis.net> writes:
> Linus Torvalds wrote (ao):
>> On Wed, 12 Jan 2005, Sergey S. Kostyliov wrote:
>> > 2.6.10-rc1 hangs at boot stage for my dual opteron machine
>>
>> Oops, yes. There's some recent NUMA breakage - either disable
>> CONFIG_NUMA, or apply the patches that Andi Kleen just posted on the
>> mailing list (the second option much preferred, just to verify that
>> yes, that does fix it).
>
> I was under the impression that NUMA is useful on > 2-way systems only.
> Is this true, and if not, under what circumstances is NUMA useful on
> 2-way Opteron systems?
I don't know who gave you this impression, but it's wrong. Using a
NUMA aware kernel is an advantage under many workloads on a 2way
Opteron system.
>
> In other words: why should one want NUMA to be enabled or disabled for
> dual Opteron?
Because it is faster.
-Andi
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron
2005-01-13 10:02 ` NUMA or not on dual Opteron Raphael Jacquot
2005-01-13 17:07 ` Justin M. Forbes
@ 2005-01-13 19:40 ` Andi Kleen
1 sibling, 0 replies; 44+ messages in thread
From: Andi Kleen @ 2005-01-13 19:40 UTC (permalink / raw)
To: Raphael Jacquot; +Cc: Kernel Mailing List, Sergey S. Kostyliov
Raphael Jacquot <raphael.jacquot@imag.fr> writes:
>
> Numa needs to be enabled on bi-opteron systems because each processor
> controls part of the memory. unlike the intel memory architecture,
> where processors share the same bus to access memory.
> Numa in opteron systems is thus required to allow sharing of memory .
[just for the record to avoid wrong information in the archives]
No, that's wrong. Opteron is CC (cache coherent)/NUMA, like most
modern NUMA systems. CC/NUMA tends to be fully transparent, this
means the system can be run like a SMP. Just it's faster to be
NUMA aware.
-Andi
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron
2005-01-13 17:07 ` Justin M. Forbes
@ 2005-01-13 19:43 ` Andi Kleen
0 siblings, 0 replies; 44+ messages in thread
From: Andi Kleen @ 2005-01-13 19:43 UTC (permalink / raw)
To: Justin M. Forbes; +Cc: sander, Kernel Mailing List, Sergey S. Kostyliov
"Justin M. Forbes" <jmforbes@linuxtx.org> writes:
> This is somewhat true. There are 2 types of dual opteron boards. Those in
> the $200 US range only have one memory bank, which is attached to CPU0.
> They operate as a single node, and may perform better with numa turned off.
> Those in the $400+ range tend to have one bank per CPU and will certainly
> perform better with numa on. They do usually have a bios option to
> interleave the nodes which would show up as a single node, and probably
> perform better with numa turned off, but a better solution is to turn off
> the node interleave in bios and run the kernel with numa support.
> Basically if you have 2 CPUs and only one memory bank, maybe turning numa
> off will give better performance, but if you have one memory bank per CPU
> numa should be on.
[agreed, except:]
There is no significant performance difference between NUMA on and off
on the crippled boards. So best is to always enable CONFIG_NUMA on x86-64.
The distribution kernels for x86-64 should ship in this configuration
too.
I would recommend to always disable node interleaved on the non crippled
board with multiple memory banks. Most boards ship with this disabled by
default, only a few enable it.
-Andi
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron
2005-01-13 9:45 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Sander
` (2 preceding siblings ...)
2005-01-13 19:38 ` NUMA or not on dual Opteron Andi Kleen
@ 2005-01-13 21:24 ` Bernd Eckenfels
2005-01-14 8:04 ` David Schwartz
3 siblings, 1 reply; 44+ messages in thread
From: Bernd Eckenfels @ 2005-01-13 21:24 UTC (permalink / raw)
To: linux-kernel
In article <20050113094537.GB2547@favonius> you wrote:
> I was under the impression that NUMA is useful on > 2-way systems only.
> Is this true, and if not, under what circumstances is NUMA useful on
> 2-way Opteron systems?
NUMA is good for all situations where you have more than one CPU and the
CPUs have different access speeds for some parts of the memory (i.e. cpu
local memory). This is true for SMP Opterons, not for the usual Intel
Boards.
Greetings
Bernd
y
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1 (ACPI related problems)
2005-01-12 7:32 ` Markus Trippelsdorf
@ 2005-01-13 22:37 ` Hanspeter Kunz
0 siblings, 0 replies; 44+ messages in thread
From: Hanspeter Kunz @ 2005-01-13 22:37 UTC (permalink / raw)
To: Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 2124 bytes --]
And I see these errors on i386:
ACPI-1138: *** Error: Method execution failed
[\_SB_.PCI0.LPC0.EC0_.EC8C] (Node c17ee940), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed
[\_SB_.PCI0.LPC0.EC0_.EC04] (Node c17eeba0), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\_SB_.ECPF] (Node
c17ded20), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\_SB_.BATA._BIF] (Node
c17f3c00), AE_AML_BUFFER_LIMIT
consequently, my /proc/acpi/battery/ is empty.
Further, when I go to S3 the system does not enter sleep mode (as it did
with 2.6.10).
Otherwise it runs without problems.
cheers,
Hp.
On Wed, 2005-01-12 at 08:32 +0100, Markus Trippelsdorf wrote:
> I see these errors in dmesg on an AMD_64:
>
> ACPI: Subsystem revision 20041210
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI-1138: *** Error: Method execution failed [\MCTH] (Node
> ffff81003ff8ecc0), AE_AML_BUFFER_LIMIT
> ACPI-1138: *** Error: Method execution failed [\OSFL] (Node
> ffff81003ff8ed00), AE_AML_BUFFER_LIMIT
> ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0._S3D]
> (Node ffff81003ff82140), AE_AML_BUFFER_LIMIT
> ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0._S3D]
> (Node ffff81003ff82140), AE_AML_BUFFER_LIMIT
>
> But the system is running fine AFAICT.
>
> __
> Markus
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Hanspeter Kunz Artificial Intelligence Laboratory
Ph.D. Student Department of Information Technology
Email: hkunz@ailab.ch University of Zurich
Tel: +41.(0)44.63-54306 Andreasstrasse 15, Office 2.12
http://ailab.ch/people/hkunz CH-8050 Zurich, Switzerland
Spamtraps: hkunz.bogus@ailab.ch hkunz.bogus@ifi.unizh.ch
---
It's not whether you win or lose, it's how you place the blame.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1 (compile stats)
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
` (5 preceding siblings ...)
2005-01-13 5:42 ` [PATCH] contort getdents64 to pacify gcc-2.96 Adam Kropelin
@ 2005-01-13 23:15 ` John Cherry
2005-01-16 9:22 ` Cross-compilation broken (was: Re: Linux 2.6.11-rc1) Geert Uytterhoeven
2005-01-19 21:07 ` Linux 2.6.11-rc1 Daniel Gryniewicz
8 siblings, 0 replies; 44+ messages in thread
From: John Cherry @ 2005-01-13 23:15 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
It has been awhile since I sent out compile stats for either Andrew's
or Linus' releases. Below are the stats for the last few releases
on both trees. Full stats and data can be found as usual on:
http://developer.osdl.org/cherry/compile/
Linux 2.6 Compile Statistics (gcc 3.4.1)
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
----------- ----------- -------- -------- -------- -------- ---------
2.6.11-rc1 20w/0e 0w/0e 497w/0e 6w/0e 22w/0e 577w/0e
2.6.10 13w/0e 0w/0e 778w/0e 6w/0e 15w/0e 861w/0e
2.6.9-rc3 13w/0e 0w/0e 774w/0e 6w/0e 15w/0e 857w/0e
2.6.9-rc2 14w/0e 0w/0e 1815w/11e 65w/0e 19w/0e 2157w/0e
Daily compiles (ia32):
http://developer.osdl.org/cherry/compile/2.6/linus-tree/running.txt
Linux 2.6 (mm tree) Compile Statistics (gcc 3.4.1)
--------------------------------------------------
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.10-mm3 21w/0e 0w/0e 320w/0e 6w/0e 23w/0e 299w/0e
2.6.10-mm2 21w/0e 0w/0e 440w/0e 6w/0e 23w/0e 420w/0e
2.6.10-mm1 12w/0e 0w/0e 414w/0e 6w/0e 17w/0e 399w/0e
2.6.10-rc3-mm1 12w/0e 0w/0e 414w/0e 6w/0e 16w/0e 401w/0e
2.6.10-rc2-mm4 15w/0e 1w/7e 421w/0e 6w/0e 16w/0e 408w/0e
2.6.10-rc2-mm3 15w/0e 0w/0e 1255w/12e 66w/0e 16w/0e 1507w/0e
2.6.10-rc2-mm2 15w/0e 0w/0e 1362w/15e 65w/0e 16w/0e 1612w/2e
2.6.10-rc2-mm1 15w/0e 0w/0e 1405w/11e 65w/0e 16w/0e 1652w/0e
2.6.10-rc1-mm5 16w/0e 0w/0e 1587w/0e 65w/0e 20w/0e 1834w/0e
2.6.10-rc1-mm4 16w/0e 0w/0e 1485w/9e 65w/0e 20w/0e 1732w/0e
John
^ permalink raw reply [flat|nested] 44+ messages in thread
* RE: NUMA or not on dual Opteron
2005-01-13 21:24 ` Bernd Eckenfels
@ 2005-01-14 8:04 ` David Schwartz
2005-01-14 8:10 ` Arjan van de Ven
2005-01-14 8:48 ` Andi Kleen
0 siblings, 2 replies; 44+ messages in thread
From: David Schwartz @ 2005-01-14 8:04 UTC (permalink / raw)
To: linux-kernel
> In article <20050113094537.GB2547@favonius> you wrote:
> > I was under the impression that NUMA is useful on > 2-way systems only.
> > Is this true, and if not, under what circumstances is NUMA useful on
> > 2-way Opteron systems?
> NUMA is good for all situations where you have more than one CPU and the
> CPUs have different access speeds for some parts of the memory (i.e. cpu
> local memory). This is true for SMP Opterons, not for the usual Intel
> Boards.
Not quite. It's good if and only if the NU of the MA is sufficient to
overcome the overhead associated with the NUMA code. Whether or not this is
true depends upon two factors:
1) How non-uniform is the memory access? On 2 CPU Opteron systems, the
answer is generally not very at all, it's nearly uniform.
2) How much overhead does the NUMA code add? On most of the benchmarks I've
seen, the answer is a lot, so much that the memory access would have to be
very non-uniform (factor of 2 at least) to justify enabling the NUMA code.
With more CPUs, 1 goes up, being an advantage to NUMA. As time goes by, 2
has been going down, being another advantage to NUMA.
Perhaps others have seen more recent benchmarks with smarter NUMA code?
DS
^ permalink raw reply [flat|nested] 44+ messages in thread
* RE: NUMA or not on dual Opteron
2005-01-14 8:04 ` David Schwartz
@ 2005-01-14 8:10 ` Arjan van de Ven
2005-01-14 8:48 ` Andi Kleen
1 sibling, 0 replies; 44+ messages in thread
From: Arjan van de Ven @ 2005-01-14 8:10 UTC (permalink / raw)
To: davids; +Cc: linux-kernel
On Fri, 2005-01-14 at 00:04 -0800, David Schwartz wrote:
> > In article <20050113094537.GB2547@favonius> you wrote:
>
> > > I was under the impression that NUMA is useful on > 2-way systems only.
> > > Is this true, and if not, under what circumstances is NUMA useful on
> > > 2-way Opteron systems?
>
> > NUMA is good for all situations where you have more than one CPU and the
> > CPUs have different access speeds for some parts of the memory (i.e. cpu
> > local memory). This is true for SMP Opterons, not for the usual Intel
> > Boards.
>
> Not quite. It's good if and only if the NU of the MA is sufficient to
> overcome the overhead associated with the NUMA code. Whether or not this is
> true depends upon two factors:
>
> 1) How non-uniform is the memory access? On 2 CPU Opteron systems, the
> answer is generally not very at all, it's nearly uniform.
>
> 2) How much overhead does the NUMA code add? On most of the benchmarks I've
> seen, the answer is a lot, so much that the memory access would have to be
> very non-uniform (factor of 2 at least) to justify enabling the NUMA code.
btw one of the major "pain points" of numa is that there are more memory
zones, and thus making it harder on the vm to balance the memory between
them...
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron
2005-01-14 8:04 ` David Schwartz
2005-01-14 8:10 ` Arjan van de Ven
@ 2005-01-14 8:48 ` Andi Kleen
1 sibling, 0 replies; 44+ messages in thread
From: Andi Kleen @ 2005-01-14 8:48 UTC (permalink / raw)
To: davids; +Cc: linux-kernel
"David Schwartz" <davids@webmaster.com> writes:
>
> 2) How much overhead does the NUMA code add? On most of the benchmarks I've
> seen, the answer is a lot, so much that the memory access would have to be
Hmm? What benchmarks were that? That doesn't match my experience.
-Andi
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: NUMA or not on dual Opteron
2005-01-13 19:38 ` NUMA or not on dual Opteron Andi Kleen
@ 2005-01-15 23:42 ` Sander
0 siblings, 0 replies; 44+ messages in thread
From: Sander @ 2005-01-15 23:42 UTC (permalink / raw)
To: linux-kernel
Andi Kleen wrote (ao):
> Sander <sander@humilis.net> writes:
> > I was under the impression that NUMA is useful on > 2-way systems
> > only. Is this true, and if not, under what circumstances is NUMA
> > useful on 2-way Opteron systems?
>
> I don't know who gave you this impression, but it's wrong. Using a
> NUMA aware kernel is an advantage under many workloads on a 2way
> Opteron system.
>
> > In other words: why should one want NUMA to be enabled or disabled for
> > dual Opteron?
>
> Because it is faster.
I want to thank all who replied. The answers were similar to the above.
I'll update the impression.
Kind regards, Sander
^ permalink raw reply [flat|nested] 44+ messages in thread
* Cross-compilation broken (was: Re: Linux 2.6.11-rc1)
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
` (6 preceding siblings ...)
2005-01-13 23:15 ` Linux 2.6.11-rc1 (compile stats) John Cherry
@ 2005-01-16 9:22 ` Geert Uytterhoeven
2005-01-16 16:09 ` Sam Ravnborg
2005-01-19 21:07 ` Linux 2.6.11-rc1 Daniel Gryniewicz
8 siblings, 1 reply; 44+ messages in thread
From: Geert Uytterhoeven @ 2005-01-16 9:22 UTC (permalink / raw)
To: Linus Torvalds, Sam Ravnborg, Andrew Morton; +Cc: Kernel Mailing List
On Tue, 11 Jan 2005, Linus Torvalds wrote:
> Sam Ravnborg:
> o kbuild: Use -isystem `gcc --print-file-name=include`
This change broke cross-compilation for me.
It causes /usr/lib/gcc-lib/i486-linux/3.3.5/include/stdarg.h to be picked up
instead of /usr/local/lib/gcc-lib/m68k-linux/2.95.2/include/stdarg.h.
Changing
| NOSTDINC_FLAGS := -nostdinc -isystem $(shell $(CC) -print-file-name=include)
to
| NOSTDINC_FLAGS = -nostdinc -isystem $(shell $(CC) -print-file-name=include)
fixed it. I guess it picked up the definition for $(CC) before it became
$(CROSS_COMPILE)gcc.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Cross-compilation broken (was: Re: Linux 2.6.11-rc1)
2005-01-16 9:22 ` Cross-compilation broken (was: Re: Linux 2.6.11-rc1) Geert Uytterhoeven
@ 2005-01-16 16:09 ` Sam Ravnborg
2005-01-17 9:00 ` Geert Uytterhoeven
0 siblings, 1 reply; 44+ messages in thread
From: Sam Ravnborg @ 2005-01-16 16:09 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Linus Torvalds, Sam Ravnborg, Andrew Morton, Kernel Mailing List
On Sun, Jan 16, 2005 at 10:22:43AM +0100, Geert Uytterhoeven wrote:
> Changing
>
> | NOSTDINC_FLAGS := -nostdinc -isystem $(shell $(CC) -print-file-name=include)
>
> to
>
> | NOSTDINC_FLAGS = -nostdinc -isystem $(shell $(CC) -print-file-name=include)
>
> fixed it. I guess it picked up the definition for $(CC) before it became
> $(CROSS_COMPILE)gcc.
Main culprint here is m68k fiddelign with definition of CROSS_COMPILE in
arch/m68k/Makefile.
If I find no better fix I will take your version.
Sam
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Cross-compilation broken (was: Re: Linux 2.6.11-rc1)
2005-01-16 16:09 ` Sam Ravnborg
@ 2005-01-17 9:00 ` Geert Uytterhoeven
0 siblings, 0 replies; 44+ messages in thread
From: Geert Uytterhoeven @ 2005-01-17 9:00 UTC (permalink / raw)
To: Sam Ravnborg; +Cc: Linus Torvalds, Andrew Morton, Kernel Mailing List
On Sun, 16 Jan 2005, Sam Ravnborg wrote:
> On Sun, Jan 16, 2005 at 10:22:43AM +0100, Geert Uytterhoeven wrote:
> > Changing
> >
> > | NOSTDINC_FLAGS := -nostdinc -isystem $(shell $(CC) -print-file-name=include)
> >
> > to
> >
> > | NOSTDINC_FLAGS = -nostdinc -isystem $(shell $(CC) -print-file-name=include)
> >
> > fixed it. I guess it picked up the definition for $(CC) before it became
> > $(CROSS_COMPILE)gcc.
>
> Main culprint here is m68k fiddelign with definition of CROSS_COMPILE in
> arch/m68k/Makefile.
> If I find no better fix I will take your version.
M68k isn't the only one. Other archs with builtin automatic support for
cross-compilation do it as well: mips, hppa, hppa64, h8300.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
` (7 preceding siblings ...)
2005-01-16 9:22 ` Cross-compilation broken (was: Re: Linux 2.6.11-rc1) Geert Uytterhoeven
@ 2005-01-19 21:07 ` Daniel Gryniewicz
2005-01-20 4:16 ` Dmitry Torokhov
8 siblings, 1 reply; 44+ messages in thread
From: Daniel Gryniewicz @ 2005-01-19 21:07 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 1358 bytes --]
On Tue, 2005-01-11 at 21:09 -0800, Linus Torvalds wrote:
> Ok, the big merges after 2.6.10 are hopefully over, and 2.6.11-rc1 is out
> there.
>
<snip>
> Peter Osterlund:
> o input: Add ALPS touchpad driver, driver by Neil Brown, Peter
> Osterlund and Dmitry Torokhov, some fixes by Vojtech Pavlik.
2.6.11-rc1 broke my ALPS touchpad. I have a Dell Inspiron 8600, and
previously, I was patching my kernels with the patch from
Message-Id: <200407110045.08208.dtor_core@ameritech.net>
Subject: [RFT/PATCH 2.6] ALPS touchpad driver
and this worked fine. I had the scroll zones and tapping, and so on,
working fine, and dmesg included indications that the Alps was detected:
Jan 19 10:09:40 athena alps.c: E6 report: 00 00 64
Jan 19 10:09:40 athena alps.c: E7 report: 73 02 0a
Jan 19 10:09:40 athena alps.c: E6 report: 00 00 64
Jan 19 10:09:40 athena alps.c: E7 report: 73 02 0a
Jan 19 10:09:40 athena alps.c: Status: 15 01 0a
Jan 19 10:09:40 athena ALPS Touchpad (Glidepoint) detected
Jan 19 10:09:40 athena alps.c: Status: 15 01 0a
Jan 19 10:09:40 athena input: AlpsPS/2 ALPS TouchPad on isa0060/serio1
Now, with 2.6.11-rc1, I don't get any output related to Alps from dmesg,
and synclient -h says "No touchpad found".
Any help would be appreciated...
config attached. This is 2.6.11-rc1-ck2 with the inotify patch from
mm1.
Thanks,
Daniel
[-- Attachment #2: config.2.6.11-rc1-ck2-dfg1 --]
[-- Type: text/plain, Size: 31204 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc1-ck2-dfg1
# Wed Jan 19 15:13:29 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_BKL is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_1GLOWMEM=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda6"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
CONFIG_I82092=m
CONFIG_I82365=m
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_IOPRIO_WRITE=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGETKIT is not set
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_4KSTACKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-19 21:07 ` Linux 2.6.11-rc1 Daniel Gryniewicz
@ 2005-01-20 4:16 ` Dmitry Torokhov
2005-01-20 4:49 ` Daniel Gryniewicz
0 siblings, 1 reply; 44+ messages in thread
From: Dmitry Torokhov @ 2005-01-20 4:16 UTC (permalink / raw)
To: Daniel Gryniewicz
Cc: Andrew Morton, Kernel Mailing List, Linus Torvalds, Peter Osterlund
On Wednesday 19 January 2005 16:07, Daniel Gryniewicz wrote:
> On Tue, 2005-01-11 at 21:09 -0800, Linus Torvalds wrote:
> > Ok, the big merges after 2.6.10 are hopefully over, and 2.6.11-rc1 is out
> > there.
> >
> <snip>
>
> > Peter Osterlund:
> > o input: Add ALPS touchpad driver, driver by Neil Brown, Peter
> > Osterlund and Dmitry Torokhov, some fixes by Vojtech Pavlik.
>
> 2.6.11-rc1 broke my ALPS touchpad. I have a Dell Inspiron 8600, and
> previously, I was patching my kernels with the patch from
>
> Message-Id: <200407110045.08208.dtor_core@ameritech.net>
> Subject: [RFT/PATCH 2.6] ALPS touchpad driver
>
> and this worked fine. I had the scroll zones and tapping, and so on,
> working fine, and dmesg included indications that the Alps was detected:
>
> Jan 19 10:09:40 athena alps.c: E6 report: 00 00 64
> Jan 19 10:09:40 athena alps.c: E7 report: 73 02 0a
> Jan 19 10:09:40 athena alps.c: E6 report: 00 00 64
> Jan 19 10:09:40 athena alps.c: E7 report: 73 02 0a
> Jan 19 10:09:40 athena alps.c: Status: 15 01 0a
> Jan 19 10:09:40 athena ALPS Touchpad (Glidepoint) detected
> Jan 19 10:09:40 athena alps.c: Status: 15 01 0a
> Jan 19 10:09:40 athena input: AlpsPS/2 ALPS TouchPad on isa0060/serio1
>
>
Hi,
Could you please try this patch by Peter Osterlund:
http://marc.theaimsgroup.com/?l=linux-kernel&m=110513688110246&q=raw
It looks like Kensington and ALPS hate each other.
--
Dmitry
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-20 4:16 ` Dmitry Torokhov
@ 2005-01-20 4:49 ` Daniel Gryniewicz
2005-01-20 7:17 ` Peter Osterlund
0 siblings, 1 reply; 44+ messages in thread
From: Daniel Gryniewicz @ 2005-01-20 4:49 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Andrew Morton, Kernel Mailing List, Linus Torvalds, Peter Osterlund
On Wed, 2005-01-19 at 23:16 -0500, Dmitry Torokhov wrote:
> On Wednesday 19 January 2005 16:07, Daniel Gryniewicz wrote:
> > On Tue, 2005-01-11 at 21:09 -0800, Linus Torvalds wrote:
> > > Ok, the big merges after 2.6.10 are hopefully over, and 2.6.11-rc1 is out
> > > there.
> > >
> > <snip>
> >
> > > Peter Osterlund:
> > > o input: Add ALPS touchpad driver, driver by Neil Brown, Peter
> > > Osterlund and Dmitry Torokhov, some fixes by Vojtech Pavlik.
> >
> > 2.6.11-rc1 broke my ALPS touchpad. I have a Dell Inspiron 8600, and
> > previously, I was patching my kernels with the patch from
> >
> > Message-Id: <200407110045.08208.dtor_core@ameritech.net>
> > Subject: [RFT/PATCH 2.6] ALPS touchpad driver
> >
> > and this worked fine. I had the scroll zones and tapping, and so on,
> > working fine, and dmesg included indications that the Alps was detected:
> >
> > Jan 19 10:09:40 athena alps.c: E6 report: 00 00 64
> > Jan 19 10:09:40 athena alps.c: E7 report: 73 02 0a
> > Jan 19 10:09:40 athena alps.c: E6 report: 00 00 64
> > Jan 19 10:09:40 athena alps.c: E7 report: 73 02 0a
> > Jan 19 10:09:40 athena alps.c: Status: 15 01 0a
> > Jan 19 10:09:40 athena ALPS Touchpad (Glidepoint) detected
> > Jan 19 10:09:40 athena alps.c: Status: 15 01 0a
> > Jan 19 10:09:40 athena input: AlpsPS/2 ALPS TouchPad on isa0060/serio1
> >
> >
>
> Hi,
>
> Could you please try this patch by Peter Osterlund:
>
> http://marc.theaimsgroup.com/?l=linux-kernel&m=110513688110246&q=raw
>
> It looks like Kensington and ALPS hate each other.
>
That fixed it, thanks. I hope this can make it in before 2.6.11 final,
but if it doesn't, I'll just patch it in.
Daniel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-20 4:49 ` Daniel Gryniewicz
@ 2005-01-20 7:17 ` Peter Osterlund
2005-01-20 15:01 ` Romano Giannetti
0 siblings, 1 reply; 44+ messages in thread
From: Peter Osterlund @ 2005-01-20 7:17 UTC (permalink / raw)
To: Daniel Gryniewicz
Cc: Dmitry Torokhov, Andrew Morton, Kernel Mailing List, Linus Torvalds
On Wed, 19 Jan 2005, Daniel Gryniewicz wrote:
> On Wed, 2005-01-19 at 23:16 -0500, Dmitry Torokhov wrote:
> > On Wednesday 19 January 2005 16:07, Daniel Gryniewicz wrote:
> > > On Tue, 2005-01-11 at 21:09 -0800, Linus Torvalds wrote:
> > > > Ok, the big merges after 2.6.10 are hopefully over, and 2.6.11-rc1 is out
> > > > there.
> > > >
> > > > Peter Osterlund:
> > > > o input: Add ALPS touchpad driver, driver by Neil Brown, Peter
> > > > Osterlund and Dmitry Torokhov, some fixes by Vojtech Pavlik.
> > >
> > > 2.6.11-rc1 broke my ALPS touchpad. I have a Dell Inspiron 8600, and
> > > previously, I was patching my kernels with the patch from
> > >
> > > Message-Id: <200407110045.08208.dtor_core@ameritech.net>
> > > Subject: [RFT/PATCH 2.6] ALPS touchpad driver
> > >
> > > and this worked fine.
> > >
> > Could you please try this patch by Peter Osterlund:
> >
> > http://marc.theaimsgroup.com/?l=linux-kernel&m=110513688110246&q=raw
> >
> > It looks like Kensington and ALPS hate each other.
>
> That fixed it, thanks. I hope this can make it in before 2.6.11 final,
> but if it doesn't, I'll just patch it in.
OK, I've got another report in private mail where this patch fixed the
ALPS detection, so the score for this patch is now 3 success reports and 0
problem reports. I also think the patch should be included before 2.6.11
final.
The patch is already in -mm btw, it's called alps-touchpad-detection-fix.
--
Peter Osterlund - petero2@telia.com
http://web.telia.com/~u89404340
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-20 7:17 ` Peter Osterlund
@ 2005-01-20 15:01 ` Romano Giannetti
0 siblings, 0 replies; 44+ messages in thread
From: Romano Giannetti @ 2005-01-20 15:01 UTC (permalink / raw)
To: Kernel Mailing List; +Cc: petero2
On Thu, Jan 20, 2005 at 08:17:38AM +0100, Peter Osterlund wrote:
> >
> > That fixed it, thanks. I hope this can make it in before 2.6.11 final,
> > but if it doesn't, I'll just patch it in.
>
> OK, I've got another report in private mail where this patch fixed the
> ALPS detection, so the score for this patch is now 3 success reports and 0
> problem reports. I also think the patch should be included before 2.6.11
> final.
>
You can add another success. Sony Vaio FX701.
Romano
--
Romano Giannetti - Univ. Pontificia Comillas (Madrid, Spain)
Electronic Engineer - phone +34 915 422 800 ext 2416 fax +34 915 596 569
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-13 1:21 ` Terence Ripperda
2005-01-13 3:07 ` Voluspa
@ 2005-01-13 8:42 ` Voluspa
1 sibling, 0 replies; 44+ messages in thread
From: Voluspa @ 2005-01-13 8:42 UTC (permalink / raw)
To: Terence Ripperda; +Cc: linux-kernel
On Wed, 12 Jan 2005 19:21:59 -0600
Terence Ripperda wrote:
> change_page_attr has a book-keeping bug that surprisingly hasn't
> caused problems until recently (on my todo list is to track down what
> caused this problem to suddenly start triggering).
If it can help, I'm writing this on a 2.6.10-bk14 kernel. So it's just
the final bits going into 2.6.11-rc1 that pushed the bug on. At
least on my machine.
Can't find any incremental bk14->rc1 to finalize that statement, though.
Ok kernels, from 2.6.10, that I've compiled and run now is: -bk7, -bk11,
-bk13 and -bk14.
--
Mvh
Mats Johannesson
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-13 1:21 ` Terence Ripperda
@ 2005-01-13 3:07 ` Voluspa
2005-01-13 8:42 ` Voluspa
1 sibling, 0 replies; 44+ messages in thread
From: Voluspa @ 2005-01-13 3:07 UTC (permalink / raw)
To: Terence Ripperda; +Cc: linux-kernel
On Wed, 12 Jan 2005 19:21:59 -0600
Terence Ripperda wrote:
> the x86_64 change in bk is here, but the only thing you really need is
> the 'get_page' fix. you should be able to manually edit
> linux/arch/i386/mm/pageattr.c:__change_page_attr(), update that single
> line and be fine:
Not being a coder I was unable to change that function correctly.
replacing "struct page *page" with a "unsigned long pfn" craved other
changes further down - if that even is how you begin hacking... I'll
just wait for the real implementation.
--
Mvh
Mats Johannesson
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-13 1:13 ` Voluspa
@ 2005-01-13 1:21 ` Terence Ripperda
2005-01-13 3:07 ` Voluspa
2005-01-13 8:42 ` Voluspa
0 siblings, 2 replies; 44+ messages in thread
From: Terence Ripperda @ 2005-01-13 1:21 UTC (permalink / raw)
To: Voluspa; +Cc: linux-kernel, tripperda
this looks suspiciously like a kernel bug Andi Kleen and I are
currently investigating. He has fixes in the bk branches. I would have
expected them to be in such a new kernel, but I noticed that you're
using an x86 kernel, and his initial fixes were only in the x86_64
arch files.
change_page_attr has a book-keeping bug that surprisingly hasn't
caused problems until recently (on my todo list is to track down what
caused this problem to suddenly start triggering).
the x86_64 change in bk is here, but the only thing you really need is
the 'get_page' fix. you should be able to manually edit
linux/arch/i386/mm/pageattr.c:__change_page_attr(), update that single
line and be fine:
http://linux.bkbits.net:8080/linux-2.6/diffs/arch/x86_64/mm/pageattr.c@1.13?nav=index.html|src/|src/arch|src/arch/x86_64|src/arch/x86_64/mm|hist/arch/x86_64/mm/pageattr.c
Thanks,
Terence
On Thu, Jan 13, 2005 at 02:13:28AM +0100, lista1@telia.com wrote:
> On Wed, 12 Jan 2005 09:52:38 +0100 Voluspa wrote:
>
> > Yes, tainted. X black screen, no keyboard. Power button to turn off. I
> > really don't feel like compiling lots of debug-kernels to chase this,
> > unless someone is really interested, which I doubt.
>
> A fyi directed to other users: It was the nvidia module. Xorg nv is
> fine. Did a CONFIG_KALLSYMS=y kernel and am attaching the output.
>
> Turning on relevant debugging options in "Kernel hacking" hides the bug
> (ie prevents it from happening). Very annoying and is a behaviour I've
> seen before with other bugs. The price of kernel complexity, I guess.
>
> --
> Mvh
> Mats Johannesson
> [-- mutt.octet.filter file type: "ASCII text, with very long lines" --]
>
>
> Jan 13 01:09:42 loke kernel: ------------[ cut here ]------------
> Jan 13 01:09:42 loke kernel: kernel BUG at <bad filename>:395!
> Jan 13 01:09:42 loke kernel: invalid operand: 0000 [#1]
> Jan 13 01:09:42 loke kernel: PREEMPT
> Jan 13 01:09:42 loke kernel: Modules linked in: nvidia 8139too crc32 snd_seq_oss snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul snd_seq snd_pcm_oss snd_mixer_oss snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore
> Jan 13 01:09:42 loke kernel: CPU: 0
> Jan 13 01:09:42 loke kernel: EIP: 0060:[__change_page_attr+169/286] Tainted: P VLI
> Jan 13 01:09:42 loke kernel: EFLAGS: 00213002 (2.6.11-rc1)
> Jan 13 01:09:42 loke kernel: EIP is at __change_page_attr+0xa9/0x11e
> Jan 13 01:09:42 loke kernel: eax: 054001e3 ebx: 05530000 ecx: c1006c40 edx: 054001e3
> Jan 13 01:09:42 loke kernel: esi: c0362c54 edi: 00000163 ebp: c1000000 esp: ca147db4
> Jan 13 01:09:42 loke kernel: ds: 007b es: 007b ss: 0068
> Jan 13 01:09:42 loke kernel: Process X (pid: 575, threadinfo=ca147000 task=cd4b4060)
> Jan 13 01:09:42 loke kernel: Stack: c5530000 c10aa600 00000010 00000000 00203246 c010db9d 00000163 00000011
> Jan 13 01:09:42 loke kernel: c10aa400 ce2eda60 cd54fc00 ca147e20 c010d883 00010000 d0a80000 d0f75bec
> Jan 13 01:09:42 loke kernel: d0d8a180 d0a80000 00010000 cd54fc00 d0d8a173 cff08400 cd54f400 ca147e60
> Jan 13 01:09:42 loke kernel: Call Trace:
> Jan 13 01:09:42 loke kernel: [change_page_attr+48/97] change_page_attr+0x30/0x61
> Jan 13 01:09:42 loke kernel: [iounmap+101/118] iounmap+0x65/0x76
> Jan 13 01:09:42 loke kernel: [pg0+280927212/1070015488] os_unmap_kernel_space+0x9/0xa [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278913408/1070015488] _nv001706rm+0x20/0x2c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278913395/1070015488] _nv001706rm+0x13/0x2c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278898481/1070015488] _nv002359rm+0xe9/0x184 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278862458/1070015488] _nv001955rm+0x36/0xe0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278935092/1070015488] _nv001297rm+0x9c/0xa8 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278940044/1070015488] rm_teardown_agp+0x48/0x50 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278862458/1070015488] _nv001955rm+0x36/0xe0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+280919192/1070015488] nv_agp_teardown+0x4c/0x7c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278922699/1070015488] _nv001708rm+0x73/0xa0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278865062/1070015488] _nv001847rm+0x26/0x2c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278925180/1070015488] _nv000650rm+0x58/0xcc [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278925271/1070015488] _nv000650rm+0xb3/0xcc [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278926961/1070015488] _nv001362rm+0x71/0xb0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278926974/1070015488] _nv001362rm+0x7e/0xb0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278914238/1070015488] _nv001820rm+0x12/0x18 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278937831/1070015488] rm_disable_adapter+0x2f/0x8c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278937879/1070015488] rm_disable_adapter+0x5f/0x8c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278937867/1070015488] rm_disable_adapter+0x53/0x8c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+280910374/1070015488] nv_kern_close+0x168/0x1e1 [nvidia]
> Jan 13 01:09:42 loke kernel: [__fput+61/228] __fput+0x3d/0xe4
> Jan 13 01:09:42 loke kernel: [filp_close+89/95] filp_close+0x59/0x5f
> Jan 13 01:09:42 loke kernel: [sysenter_past_esp+82/117] sysenter_past_esp+0x52/0x75
> Jan 13 01:09:42 loke kernel: Code: 56 37 c0 c1 f9 05 c1 e1 0c 0b 0d c8 62 2c c0 e8 10 ff ff ff 89 d9 ff 41 04 eb 12 a9 80 00 00 00 75 09 09 fb 89 1e ff 49 04 eb 02 <0f> 0b 8b 01 f6 c4 08 75 64 8b 41 04 40 75 02 0f 0b a1 0c 4e 2c
> Jan 13 01:09:42 loke kernel: <6>note: X[575] exited with preempt_count 1
> Jan 13 01:09:42 loke kernel: scheduling while atomic: X/0x00000001/575
> Jan 13 01:09:42 loke kernel: [schedule+64/1068] schedule+0x40/0x42c
> Jan 13 01:09:42 loke kernel: [autoremove_wake_function+0/45] autoremove_wake_function+0x0/0x2d
> Jan 13 01:09:42 loke kernel: [__sched_text_start+134/237] __down+0x86/0xed
> Jan 13 01:09:42 loke kernel: [default_wake_function+0/12] default_wake_function+0x0/0xc
> Jan 13 01:09:42 loke kernel: [release_mem+446/458] release_mem+0x1be/0x1ca
> Jan 13 01:09:42 loke kernel: [__down_failed+7/12] __down_failed+0x7/0xc
> Jan 13 01:09:42 loke kernel: [pg0+280927615/1070015488] .text.lock.os_interface+0x7/0x18 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278914238/1070015488] _nv001820rm+0x12/0x18 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278939386/1070015488] rm_free_unused_clients+0x2e/0x88 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278939410/1070015488] rm_free_unused_clients+0x46/0x88 [nvidia]
> Jan 13 01:09:42 loke kernel: [dput+27/459] dput+0x1b/0x1cb
> Jan 13 01:09:42 loke kernel: [pg0+280913993/1070015488] nv_kern_ctl_close+0x77/0xa1 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+280910265/1070015488] nv_kern_close+0xfb/0x1e1 [nvidia]
> Jan 13 01:09:42 loke kernel: [destroy_inode+34/49] destroy_inode+0x22/0x31
> Jan 13 01:09:42 loke kernel: [__fput+61/228] __fput+0x3d/0xe4
> Jan 13 01:09:42 loke kernel: [filp_close+89/95] filp_close+0x59/0x5f
> Jan 13 01:09:42 loke kernel: [put_files_struct+86/169] put_files_struct+0x56/0xa9
> Jan 13 01:09:42 loke kernel: [do_exit+257/703] do_exit+0x101/0x2bf
> Jan 13 01:09:42 loke kernel: [do_trap+0/162] do_trap+0x0/0xa2
> Jan 13 01:09:42 loke kernel: [do_invalid_op+0/139] do_invalid_op+0x0/0x8b
> Jan 13 01:09:42 loke kernel: [do_invalid_op+127/139] do_invalid_op+0x7f/0x8b
> Jan 13 01:09:42 loke kernel: [__change_page_attr+169/286] __change_page_attr+0xa9/0x11e
> Jan 13 01:09:42 loke kernel: [kobject_get+15/19] kobject_get+0xf/0x13
> Jan 13 01:09:42 loke kernel: [get_device+14/20] get_device+0xe/0x14
> Jan 13 01:09:42 loke kernel: [pci_dev_get+15/19] pci_dev_get+0xf/0x13
> Jan 13 01:09:42 loke kernel: [pci_get_subsys+174/206] pci_get_subsys+0xae/0xce
> Jan 13 01:09:42 loke kernel: [pci_get_device+11/14] pci_get_device+0xb/0xe
> Jan 13 01:09:42 loke kernel: [pg0+280926374/1070015488] os_pci_init_handle+0x7d/0x86 [nvidia]
> Jan 13 01:09:42 loke kernel: [pci_read+28/33] pci_read+0x1c/0x21
> Jan 13 01:09:42 loke kernel: [error_code+43/48] error_code+0x2b/0x30
> Jan 13 01:09:42 loke kernel: [__change_page_attr+169/286] __change_page_attr+0xa9/0x11e
> Jan 13 01:09:42 loke kernel: [change_page_attr+48/97] change_page_attr+0x30/0x61
> Jan 13 01:09:42 loke kernel: [iounmap+101/118] iounmap+0x65/0x76
> Jan 13 01:09:42 loke kernel: [pg0+280927212/1070015488] os_unmap_kernel_space+0x9/0xa [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278913408/1070015488] _nv001706rm+0x20/0x2c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278913395/1070015488] _nv001706rm+0x13/0x2c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278898481/1070015488] _nv002359rm+0xe9/0x184 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278862458/1070015488] _nv001955rm+0x36/0xe0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278935092/1070015488] _nv001297rm+0x9c/0xa8 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278940044/1070015488] rm_teardown_agp+0x48/0x50 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278862458/1070015488] _nv001955rm+0x36/0xe0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+280919192/1070015488] nv_agp_teardown+0x4c/0x7c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278922699/1070015488] _nv001708rm+0x73/0xa0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278865062/1070015488] _nv001847rm+0x26/0x2c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278925180/1070015488] _nv000650rm+0x58/0xcc [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278925271/1070015488] _nv000650rm+0xb3/0xcc [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278926961/1070015488] _nv001362rm+0x71/0xb0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278926974/1070015488] _nv001362rm+0x7e/0xb0 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278914238/1070015488] _nv001820rm+0x12/0x18 [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278937831/1070015488] rm_disable_adapter+0x2f/0x8c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278937879/1070015488] rm_disable_adapter+0x5f/0x8c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+278937867/1070015488] rm_disable_adapter+0x53/0x8c [nvidia]
> Jan 13 01:09:42 loke kernel: [pg0+280910374/1070015488] nv_kern_close+0x168/0x1e1 [nvidia]
> Jan 13 01:09:42 loke kernel: [__fput+61/228] __fput+0x3d/0xe4
> Jan 13 01:09:42 loke kernel: [filp_close+89/95] filp_close+0x59/0x5f
> Jan 13 01:09:42 loke kernel: [sysenter_past_esp+82/117] sysenter_past_esp+0x52/0x75
>
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
2005-01-12 8:52 Voluspa
@ 2005-01-13 1:13 ` Voluspa
2005-01-13 1:21 ` Terence Ripperda
0 siblings, 1 reply; 44+ messages in thread
From: Voluspa @ 2005-01-13 1:13 UTC (permalink / raw)
To: linux-kernel; +Cc: tripperda
[-- Attachment #1: Type: text/plain, Size: 625 bytes --]
On Wed, 12 Jan 2005 09:52:38 +0100 Voluspa wrote:
> Yes, tainted. X black screen, no keyboard. Power button to turn off. I
> really don't feel like compiling lots of debug-kernels to chase this,
> unless someone is really interested, which I doubt.
A fyi directed to other users: It was the nvidia module. Xorg nv is
fine. Did a CONFIG_KALLSYMS=y kernel and am attaching the output.
Turning on relevant debugging options in "Kernel hacking" hides the bug
(ie prevents it from happening). Very annoying and is a behaviour I've
seen before with other bugs. The price of kernel complexity, I guess.
--
Mvh
Mats Johannesson
[-- Attachment #2: bug-2.6.11-rc1-symbols.txt --]
[-- Type: application/octet-stream, Size: 8681 bytes --]
Jan 13 01:09:42 loke kernel: ------------[ cut here ]------------
Jan 13 01:09:42 loke kernel: kernel BUG at <bad filename>:395!
Jan 13 01:09:42 loke kernel: invalid operand: 0000 [#1]
Jan 13 01:09:42 loke kernel: PREEMPT
Jan 13 01:09:42 loke kernel: Modules linked in: nvidia 8139too crc32 snd_seq_oss snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul snd_seq snd_pcm_oss snd_mixer_oss snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore
Jan 13 01:09:42 loke kernel: CPU: 0
Jan 13 01:09:42 loke kernel: EIP: 0060:[__change_page_attr+169/286] Tainted: P VLI
Jan 13 01:09:42 loke kernel: EFLAGS: 00213002 (2.6.11-rc1)
Jan 13 01:09:42 loke kernel: EIP is at __change_page_attr+0xa9/0x11e
Jan 13 01:09:42 loke kernel: eax: 054001e3 ebx: 05530000 ecx: c1006c40 edx: 054001e3
Jan 13 01:09:42 loke kernel: esi: c0362c54 edi: 00000163 ebp: c1000000 esp: ca147db4
Jan 13 01:09:42 loke kernel: ds: 007b es: 007b ss: 0068
Jan 13 01:09:42 loke kernel: Process X (pid: 575, threadinfo=ca147000 task=cd4b4060)
Jan 13 01:09:42 loke kernel: Stack: c5530000 c10aa600 00000010 00000000 00203246 c010db9d 00000163 00000011
Jan 13 01:09:42 loke kernel: c10aa400 ce2eda60 cd54fc00 ca147e20 c010d883 00010000 d0a80000 d0f75bec
Jan 13 01:09:42 loke kernel: d0d8a180 d0a80000 00010000 cd54fc00 d0d8a173 cff08400 cd54f400 ca147e60
Jan 13 01:09:42 loke kernel: Call Trace:
Jan 13 01:09:42 loke kernel: [change_page_attr+48/97] change_page_attr+0x30/0x61
Jan 13 01:09:42 loke kernel: [iounmap+101/118] iounmap+0x65/0x76
Jan 13 01:09:42 loke kernel: [pg0+280927212/1070015488] os_unmap_kernel_space+0x9/0xa [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278913408/1070015488] _nv001706rm+0x20/0x2c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278913395/1070015488] _nv001706rm+0x13/0x2c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278898481/1070015488] _nv002359rm+0xe9/0x184 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278862458/1070015488] _nv001955rm+0x36/0xe0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278935092/1070015488] _nv001297rm+0x9c/0xa8 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278940044/1070015488] rm_teardown_agp+0x48/0x50 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278862458/1070015488] _nv001955rm+0x36/0xe0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+280919192/1070015488] nv_agp_teardown+0x4c/0x7c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278922699/1070015488] _nv001708rm+0x73/0xa0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278865062/1070015488] _nv001847rm+0x26/0x2c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278925180/1070015488] _nv000650rm+0x58/0xcc [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278925271/1070015488] _nv000650rm+0xb3/0xcc [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278926961/1070015488] _nv001362rm+0x71/0xb0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278926974/1070015488] _nv001362rm+0x7e/0xb0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278914238/1070015488] _nv001820rm+0x12/0x18 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278937831/1070015488] rm_disable_adapter+0x2f/0x8c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278937879/1070015488] rm_disable_adapter+0x5f/0x8c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278937867/1070015488] rm_disable_adapter+0x53/0x8c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+280910374/1070015488] nv_kern_close+0x168/0x1e1 [nvidia]
Jan 13 01:09:42 loke kernel: [__fput+61/228] __fput+0x3d/0xe4
Jan 13 01:09:42 loke kernel: [filp_close+89/95] filp_close+0x59/0x5f
Jan 13 01:09:42 loke kernel: [sysenter_past_esp+82/117] sysenter_past_esp+0x52/0x75
Jan 13 01:09:42 loke kernel: Code: 56 37 c0 c1 f9 05 c1 e1 0c 0b 0d c8 62 2c c0 e8 10 ff ff ff 89 d9 ff 41 04 eb 12 a9 80 00 00 00 75 09 09 fb 89 1e ff 49 04 eb 02 <0f> 0b 8b 01 f6 c4 08 75 64 8b 41 04 40 75 02 0f 0b a1 0c 4e 2c
Jan 13 01:09:42 loke kernel: <6>note: X[575] exited with preempt_count 1
Jan 13 01:09:42 loke kernel: scheduling while atomic: X/0x00000001/575
Jan 13 01:09:42 loke kernel: [schedule+64/1068] schedule+0x40/0x42c
Jan 13 01:09:42 loke kernel: [autoremove_wake_function+0/45] autoremove_wake_function+0x0/0x2d
Jan 13 01:09:42 loke kernel: [__sched_text_start+134/237] __down+0x86/0xed
Jan 13 01:09:42 loke kernel: [default_wake_function+0/12] default_wake_function+0x0/0xc
Jan 13 01:09:42 loke kernel: [release_mem+446/458] release_mem+0x1be/0x1ca
Jan 13 01:09:42 loke kernel: [__down_failed+7/12] __down_failed+0x7/0xc
Jan 13 01:09:42 loke kernel: [pg0+280927615/1070015488] .text.lock.os_interface+0x7/0x18 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278914238/1070015488] _nv001820rm+0x12/0x18 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278939386/1070015488] rm_free_unused_clients+0x2e/0x88 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278939410/1070015488] rm_free_unused_clients+0x46/0x88 [nvidia]
Jan 13 01:09:42 loke kernel: [dput+27/459] dput+0x1b/0x1cb
Jan 13 01:09:42 loke kernel: [pg0+280913993/1070015488] nv_kern_ctl_close+0x77/0xa1 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+280910265/1070015488] nv_kern_close+0xfb/0x1e1 [nvidia]
Jan 13 01:09:42 loke kernel: [destroy_inode+34/49] destroy_inode+0x22/0x31
Jan 13 01:09:42 loke kernel: [__fput+61/228] __fput+0x3d/0xe4
Jan 13 01:09:42 loke kernel: [filp_close+89/95] filp_close+0x59/0x5f
Jan 13 01:09:42 loke kernel: [put_files_struct+86/169] put_files_struct+0x56/0xa9
Jan 13 01:09:42 loke kernel: [do_exit+257/703] do_exit+0x101/0x2bf
Jan 13 01:09:42 loke kernel: [do_trap+0/162] do_trap+0x0/0xa2
Jan 13 01:09:42 loke kernel: [do_invalid_op+0/139] do_invalid_op+0x0/0x8b
Jan 13 01:09:42 loke kernel: [do_invalid_op+127/139] do_invalid_op+0x7f/0x8b
Jan 13 01:09:42 loke kernel: [__change_page_attr+169/286] __change_page_attr+0xa9/0x11e
Jan 13 01:09:42 loke kernel: [kobject_get+15/19] kobject_get+0xf/0x13
Jan 13 01:09:42 loke kernel: [get_device+14/20] get_device+0xe/0x14
Jan 13 01:09:42 loke kernel: [pci_dev_get+15/19] pci_dev_get+0xf/0x13
Jan 13 01:09:42 loke kernel: [pci_get_subsys+174/206] pci_get_subsys+0xae/0xce
Jan 13 01:09:42 loke kernel: [pci_get_device+11/14] pci_get_device+0xb/0xe
Jan 13 01:09:42 loke kernel: [pg0+280926374/1070015488] os_pci_init_handle+0x7d/0x86 [nvidia]
Jan 13 01:09:42 loke kernel: [pci_read+28/33] pci_read+0x1c/0x21
Jan 13 01:09:42 loke kernel: [error_code+43/48] error_code+0x2b/0x30
Jan 13 01:09:42 loke kernel: [__change_page_attr+169/286] __change_page_attr+0xa9/0x11e
Jan 13 01:09:42 loke kernel: [change_page_attr+48/97] change_page_attr+0x30/0x61
Jan 13 01:09:42 loke kernel: [iounmap+101/118] iounmap+0x65/0x76
Jan 13 01:09:42 loke kernel: [pg0+280927212/1070015488] os_unmap_kernel_space+0x9/0xa [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278913408/1070015488] _nv001706rm+0x20/0x2c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278913395/1070015488] _nv001706rm+0x13/0x2c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278898481/1070015488] _nv002359rm+0xe9/0x184 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278862458/1070015488] _nv001955rm+0x36/0xe0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278935092/1070015488] _nv001297rm+0x9c/0xa8 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278940044/1070015488] rm_teardown_agp+0x48/0x50 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278862458/1070015488] _nv001955rm+0x36/0xe0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+280919192/1070015488] nv_agp_teardown+0x4c/0x7c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278922699/1070015488] _nv001708rm+0x73/0xa0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278865062/1070015488] _nv001847rm+0x26/0x2c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278925180/1070015488] _nv000650rm+0x58/0xcc [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278925271/1070015488] _nv000650rm+0xb3/0xcc [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278926961/1070015488] _nv001362rm+0x71/0xb0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278926974/1070015488] _nv001362rm+0x7e/0xb0 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278914238/1070015488] _nv001820rm+0x12/0x18 [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278937831/1070015488] rm_disable_adapter+0x2f/0x8c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278937879/1070015488] rm_disable_adapter+0x5f/0x8c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+278937867/1070015488] rm_disable_adapter+0x53/0x8c [nvidia]
Jan 13 01:09:42 loke kernel: [pg0+280910374/1070015488] nv_kern_close+0x168/0x1e1 [nvidia]
Jan 13 01:09:42 loke kernel: [__fput+61/228] __fput+0x3d/0xe4
Jan 13 01:09:42 loke kernel: [filp_close+89/95] filp_close+0x59/0x5f
Jan 13 01:09:42 loke kernel: [sysenter_past_esp+82/117] sysenter_past_esp+0x52/0x75
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: Linux 2.6.11-rc1
@ 2005-01-12 8:52 Voluspa
2005-01-13 1:13 ` Voluspa
0 siblings, 1 reply; 44+ messages in thread
From: Voluspa @ 2005-01-12 8:52 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 220 bytes --]
Yes, tainted. X black screen, no keyboard. Power button to turn off. I
really don't feel like compiling lots of debug-kernels to chase this,
unless someone is really interested, which I doubt.
--
Mvh
Mats Johannesson
[-- Attachment #2: bug-2.6.11-rc1.txt --]
[-- Type: application/octet-stream, Size: 6254 bytes --]
Jan 12 08:28:45 loke kernel: ------------[ cut here ]------------
Jan 12 08:28:45 loke kernel: kernel BUG at <bad filename>:395!
Jan 12 08:28:45 loke kernel: invalid operand: 0000 [#1]
Jan 12 08:28:45 loke kernel: PREEMPT
Jan 12 08:28:45 loke kernel: Modules linked in: nvidia 8139too crc32 snd_seq_oss snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul snd_seq snd_pcm_oss snd_mixer_oss snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore
Jan 12 08:28:45 loke kernel: CPU: 0
Jan 12 08:28:45 loke kernel: EIP: 0060:[__change_page_attr+169/286] Tainted: P VLI
Jan 12 08:28:45 loke kernel: EFLAGS: 00213002 (2.6.11-rc1)
Jan 12 08:28:45 loke kernel: eax: 050001e3 ebx: 05150000 ecx: c10067c0 edx: 050001e3
Jan 12 08:28:45 loke kernel: esi: c033ec50 edi: 00000163 ebp: c1000000 esp: c61d1db4
Jan 12 08:28:45 loke kernel: ds: 007b es: 007b ss: 0068
Jan 12 08:28:45 loke kernel: Process X (pid: 653, threadinfo=c61d1000 task=cfdaa0e0)
Jan 12 08:28:45 loke kernel: Stack: c5150000 c10a2a00 00000010 00000000 00203246 c010db7d 00000163 00000011
Jan 12 08:28:45 loke kernel: c10a2800 cdbcd120 cdbac800 c61d1e20 c010d863 00010000 d0a40000 d0f48bec
Jan 12 08:28:45 loke kernel: d0d5d180 d0a40000 00010000 cdbac800 d0d5d173 cff08400 ca0f4c00 c61d1e60
Jan 12 08:28:45 loke kernel: Call Trace:
Jan 12 08:28:45 loke kernel: [change_page_attr+48/97]
Jan 12 08:28:45 loke kernel: [iounmap+101/118]
Jan 12 08:28:45 loke kernel: [pg0+280890348/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278876544/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278876531/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278861617/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278825594/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278898228/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278903180/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278825594/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+280882328/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278885835/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278828198/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278888316/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278888407/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278890097/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278890110/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278877374/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278900967/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278901015/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278901003/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+280873510/1070162944]
Jan 12 08:28:45 loke kernel: [__fput+61/228]
Jan 12 08:28:45 loke kernel: [filp_close+89/95]
Jan 12 08:28:45 loke kernel: [sysenter_past_esp+82/117]
Jan 12 08:28:45 loke kernel: Code: 16 35 c0 c1 f9 05 c1 e1 0c 0b 0d c8 52 2c c0 e8 10 ff ff ff 89 d9 ff 41 04 eb 12 a9 80 00 00 00 75 09 09 fb 89 1e ff 49 04 eb 02 <0f> 0b 8b 01 f6 c4 08 75 64 8b 41 04 40 75 02 0f 0b a1 0c 3e 2c
Jan 12 08:28:45 loke kernel: <6>note: X[653] exited with preempt_count 1
Jan 12 08:28:45 loke kernel: scheduling while atomic: X/0x00000001/653
Jan 12 08:28:45 loke kernel: [schedule+64/1068]
Jan 12 08:28:45 loke kernel: [autoremove_wake_function+0/45]
Jan 12 08:28:45 loke kernel: [__sched_text_start+134/237]
Jan 12 08:28:45 loke kernel: [default_wake_function+0/12]
Jan 12 08:28:45 loke kernel: [release_mem+446/458]
Jan 12 08:28:45 loke kernel: [__down_failed+7/12]
Jan 12 08:28:45 loke kernel: [pg0+280890751/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278877374/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278902522/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278902546/1070162944]
Jan 12 08:28:45 loke kernel: [dput+27/459]
Jan 12 08:28:45 loke kernel: [pg0+280877129/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+280873401/1070162944]
Jan 12 08:28:45 loke kernel: [destroy_inode+34/49]
Jan 12 08:28:45 loke kernel: [__fput+61/228]
Jan 12 08:28:45 loke kernel: [filp_close+89/95]
Jan 12 08:28:45 loke kernel: [put_files_struct+86/169]
Jan 12 08:28:45 loke kernel: [do_exit+257/703]
Jan 12 08:28:45 loke kernel: [do_trap+0/162]
Jan 12 08:28:45 loke kernel: [do_invalid_op+0/139]
Jan 12 08:28:45 loke kernel: [do_invalid_op+127/139]
Jan 12 08:28:45 loke kernel: [__change_page_attr+169/286]
Jan 12 08:28:45 loke kernel: [kobject_get+15/19]
Jan 12 08:28:45 loke kernel: [get_device+14/20]
Jan 12 08:28:45 loke kernel: [pci_dev_get+15/19]
Jan 12 08:28:45 loke kernel: [pci_get_subsys+174/206]
Jan 12 08:28:45 loke kernel: [pci_get_device+11/14]
Jan 12 08:28:45 loke kernel: [pg0+280889510/1070162944]
Jan 12 08:28:45 loke kernel: [pci_read+28/33]
Jan 12 08:28:45 loke kernel: [error_code+43/48]
Jan 12 08:28:45 loke kernel: [__change_page_attr+169/286]
Jan 12 08:28:45 loke kernel: [change_page_attr+48/97]
Jan 12 08:28:45 loke kernel: [iounmap+101/118]
Jan 12 08:28:45 loke kernel: [pg0+280890348/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278876544/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278876531/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278861617/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278825594/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278898228/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278903180/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278825594/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+280882328/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278885835/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278828198/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278888316/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278888407/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278890097/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278890110/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278877374/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278900967/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278901015/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+278901003/1070162944]
Jan 12 08:28:45 loke kernel: [pg0+280873510/1070162944]
Jan 12 08:28:45 loke kernel: [__fput+61/228]
Jan 12 08:28:45 loke kernel: [filp_close+89/95]
Jan 12 08:28:45 loke kernel: [sysenter_past_esp+82/117]
^ permalink raw reply [flat|nested] 44+ messages in thread
end of thread, other threads:[~2005-01-20 15:01 UTC | newest]
Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-01-12 5:09 Linux 2.6.11-rc1 Linus Torvalds
2005-01-12 7:07 ` Keith Owens
2005-01-12 7:32 ` Markus Trippelsdorf
2005-01-13 22:37 ` Linux 2.6.11-rc1 (ACPI related problems) Hanspeter Kunz
2005-01-12 8:24 ` Linux 2.6.11-rc1 Brice Goglin
2005-01-12 9:20 ` Tino Keitel
2005-01-12 9:38 ` Brice Goglin
2005-01-12 14:13 ` Dmitry Torokhov
2005-01-12 14:35 ` Brice Goglin
2005-01-12 15:50 ` Linus Torvalds
2005-01-12 19:13 ` Vojtech Pavlik
2005-01-12 15:24 ` Sergey S. Kostyliov
2005-01-12 15:32 ` Linus Torvalds
2005-01-12 15:44 ` Gene Heskett
2005-01-12 16:03 ` Sergey S. Kostyliov
2005-01-13 9:45 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Sander
2005-01-13 10:02 ` NUMA or not on dual Opteron Raphael Jacquot
2005-01-13 17:07 ` Justin M. Forbes
2005-01-13 19:43 ` Andi Kleen
2005-01-13 19:40 ` Andi Kleen
2005-01-13 15:36 ` NUMA or not on dual Opteron (was: Re: Linux 2.6.11-rc1) Alan Cox
2005-01-13 19:38 ` NUMA or not on dual Opteron Andi Kleen
2005-01-15 23:42 ` Sander
2005-01-13 21:24 ` Bernd Eckenfels
2005-01-14 8:04 ` David Schwartz
2005-01-14 8:10 ` Arjan van de Ven
2005-01-14 8:48 ` Andi Kleen
2005-01-12 19:06 ` Linux 2.6.11-rc1 -- usb_storage and Genesys Jan De Luyck
2005-01-13 5:42 ` [PATCH] contort getdents64 to pacify gcc-2.96 Adam Kropelin
2005-01-13 3:51 ` Linus Torvalds
2005-01-13 23:15 ` Linux 2.6.11-rc1 (compile stats) John Cherry
2005-01-16 9:22 ` Cross-compilation broken (was: Re: Linux 2.6.11-rc1) Geert Uytterhoeven
2005-01-16 16:09 ` Sam Ravnborg
2005-01-17 9:00 ` Geert Uytterhoeven
2005-01-19 21:07 ` Linux 2.6.11-rc1 Daniel Gryniewicz
2005-01-20 4:16 ` Dmitry Torokhov
2005-01-20 4:49 ` Daniel Gryniewicz
2005-01-20 7:17 ` Peter Osterlund
2005-01-20 15:01 ` Romano Giannetti
2005-01-12 8:52 Voluspa
2005-01-13 1:13 ` Voluspa
2005-01-13 1:21 ` Terence Ripperda
2005-01-13 3:07 ` Voluspa
2005-01-13 8:42 ` Voluspa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).