* [patch 3/5] ppc32: Compilation fixes for Ebony, Luan and Ocotea
@ 2005-03-04 21:16 akpm
2005-03-09 18:58 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: akpm @ 2005-03-04 21:16 UTC (permalink / raw)
To: greg; +Cc: linux-kernel, akpm, mporter, gjaeger
From: Matt Porter <mporter@kernel.crashing.org>
this patch fixes the problem, that the current kernel (linux-2.6.11-rc5)
could not be compiled, when "support for early boot texts over serial port"
(CONFIG_SERIAL_TEXT_DEBUG=y) is active.
Signed-off-by: Gerhard Jaeger <gjaeger@sysgo.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
25-akpm/arch/ppc/platforms/4xx/ebony.h | 4 ++--
25-akpm/arch/ppc/platforms/4xx/luan.h | 6 +++---
25-akpm/arch/ppc/platforms/4xx/ocotea.h | 4 ++--
3 files changed, 7 insertions(+), 7 deletions(-)
diff -puN arch/ppc/platforms/4xx/ebony.h~ppc32-compilation-fixes-for-ebony-luan-and-ocotea arch/ppc/platforms/4xx/ebony.h
--- 25/arch/ppc/platforms/4xx/ebony.h~ppc32-compilation-fixes-for-ebony-luan-and-ocotea 2005-03-04 13:16:17.000000000 -0800
+++ 25-akpm/arch/ppc/platforms/4xx/ebony.h 2005-03-04 13:16:17.000000000 -0800
@@ -61,8 +61,8 @@
*/
/* OpenBIOS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE (u8 *) 0xE0000200
-#define UART1_IO_BASE (u8 *) 0xE0000300
+#define UART0_IO_BASE 0xE0000200
+#define UART1_IO_BASE 0xE0000300
/* external Epson SG-615P */
#define BASE_BAUD 691200
diff -puN arch/ppc/platforms/4xx/luan.h~ppc32-compilation-fixes-for-ebony-luan-and-ocotea arch/ppc/platforms/4xx/luan.h
--- 25/arch/ppc/platforms/4xx/luan.h~ppc32-compilation-fixes-for-ebony-luan-and-ocotea 2005-03-04 13:16:17.000000000 -0800
+++ 25-akpm/arch/ppc/platforms/4xx/luan.h 2005-03-04 13:16:17.000000000 -0800
@@ -47,9 +47,9 @@
#define RS_TABLE_SIZE 3
/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE (u8 *) 0xa0000200
-#define UART1_IO_BASE (u8 *) 0xa0000300
-#define UART2_IO_BASE (u8 *) 0xa0000600
+#define UART0_IO_BASE 0xa0000200
+#define UART1_IO_BASE 0xa0000300
+#define UART2_IO_BASE 0xa0000600
#define BASE_BAUD 11059200
#define STD_UART_OP(num) \
diff -puN arch/ppc/platforms/4xx/ocotea.h~ppc32-compilation-fixes-for-ebony-luan-and-ocotea arch/ppc/platforms/4xx/ocotea.h
--- 25/arch/ppc/platforms/4xx/ocotea.h~ppc32-compilation-fixes-for-ebony-luan-and-ocotea 2005-03-04 13:16:17.000000000 -0800
+++ 25-akpm/arch/ppc/platforms/4xx/ocotea.h 2005-03-04 13:16:17.000000000 -0800
@@ -56,8 +56,8 @@
#define RS_TABLE_SIZE 2
/* OpenBIOS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE (u8 *) 0xE0000200
-#define UART1_IO_BASE (u8 *) 0xE0000300
+#define UART0_IO_BASE 0xE0000200
+#define UART1_IO_BASE 0xE0000300
#define BASE_BAUD 11059200/16
#define STD_UART_OP(num) \
_
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [patch 3/5] ppc32: Compilation fixes for Ebony, Luan and Ocotea
2005-03-04 21:16 [patch 3/5] ppc32: Compilation fixes for Ebony, Luan and Ocotea akpm
@ 2005-03-09 18:58 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2005-03-09 18:58 UTC (permalink / raw)
To: akpm; +Cc: linux-kernel, mporter, gjaeger
On Fri, Mar 04, 2005 at 01:16:56PM -0800, akpm@osdl.org wrote:
>
> From: Matt Porter <mporter@kernel.crashing.org>
>
> this patch fixes the problem, that the current kernel (linux-2.6.11-rc5)
> could not be compiled, when "support for early boot texts over serial port"
> (CONFIG_SERIAL_TEXT_DEBUG=y) is active.
>
> Signed-off-by: Gerhard Jaeger <gjaeger@sysgo.com>
> Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
> Signed-off-by: Andrew Morton <akpm@osdl.org>
Added to the -stable queue, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-03-09 19:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-03-04 21:16 [patch 3/5] ppc32: Compilation fixes for Ebony, Luan and Ocotea akpm
2005-03-09 18:58 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).