* Error messages with ACPI
@ 2005-03-05 18:09 Mina Nozar
2005-03-05 20:05 ` Richard Mittendorfer
2005-03-18 3:35 ` Len Brown
0 siblings, 2 replies; 3+ messages in thread
From: Mina Nozar @ 2005-03-05 18:09 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 555 bytes --]
Hi,
I am running Fed. Core 3 on my laptop (Asus M6NE) with an Intel Mobile
Centrino for cpu.
I've been seeing the following lingering error message in
/var/log/messages in regards to ACPI, which I don't know how to fix.
PROBLEM: Error messags in /var/log/messages on ACPI:
=====================================================
kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.BAT0._BST]
(Node dfe043c0), AE_AML_NO_RETURN_VALUE
lastt message repeated 2 times
last message repeated 4 times
...
...
I've attached the system info.
Mina
[-- Attachment #2: kernel_bug_report.info --]
[-- Type: application/octet-stream, Size: 21807 bytes --]
PROBLEM: Error messags in /var/log/messages on ACPI:
=====================================================
kernel: ACPI-1133: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node dfe043c0), AE_AML_NO_RETURN_VALUE
lastt message repeated 2 times
last message repeated 4 times
last message repeated 4 times
last message repeated 4 times
INFO ON THE SYSTEM
==================
/proc/version:
==============
Linux version 2.6.9-1.724_FC3 (bhcompile@bugs.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Sun Jan 2 15:43:49 EST
2005
/usr/src/redhat/BUILD/kernel-2.6.9/linux-2.6.9/scripts/ver_linux
================================================================
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux inspire.triumf.ca 2.6.9-1.724_FC3 #1 Sun Jan 2 15:43:49 EST 2005 i686 i686 i386 GNU/Linux
Gnu C 3.4.2
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12a
mount 2.12a
module-init-tools 3.1-pre5
e2fsprogs 1.35
jfsutils 1.1.7
reiserfsprogs 3.6.18
reiser4progs line
xfsprogs 2.6.13
pcmcia-cs 3.2.7
quota-tools 3.12.
PPP 2.4.2
nfs-utils 1.0.6
Linux C Library 2.3.4
Dynamic linker (ldd) 2.3.4
Procps 3.2.3
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
Modules Loaded parport_pc lp parport autofs4 sunrpc ds hsfusbcd2 hsfmc97sis hsfmc97ati hsfmc97ali hsfmc97via hsfmc97ich hsfpcibasic2 hsfserial hsfengine hsfosspec hsfsoar button battery asus_acpi ac md5 ipv6 ohci1394 ieee1394 yenta_socket pcmcia_core uhci_hcd ehci_hcd snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi snd_seq_device sndsoundcore ipw2200 ieee80211 ieee80211_crypt tg3 dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod
printenv
========
SUPPORTED=en_US.UTF-8:en_US:en
SSH_AGENT_PID=3801
HOSTNAME=inspire.triumf.ca
DM_CONTROL=/var/run/xdmctl
G1C_S=/mss/clas/g1c/production/pass1/v1/skims/2Pos
HOST=inspire.triumf.ca
SHELL=/bin/tcsh
TERM=xterm
XDM_MANAGED=/var/run/xdmctl/xdmctl-:0,maysd,mayfn,sched,method=classic
GS_LIB=/home/nozarm/.fonts
QTDIR=/usr/lib/qt-3.3
GROUP=nozarm
USER=nozarm
G1C_D=/cache/mss/clas/g1c/production/pass1/v1/skims/2Pos
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
TWIST_DAT=/twist/tw00z/systematics/data
HOSTTYPE=i386-linux
SSH_AUTH_SOCK=/tmp/ssh-JWPACk3800/agent.3800
MOZ_PRINTER_NAME=U
KDEDIR=/usr
MAIL=/var/spool/mail/nozarm
PATH=/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games:.:/usr/bin:/usr/X11R6/bin:/bin:/sbin:/home/nozarm/bin:/home/nozarm/PWA/bin:/home/nozarm/perl:/triumfcs/linux/bin:/home/nozarm/myclas/bin:/home/nozarm/myclas/bin/LinuxRH7:.:/usr/bin:/usr/X11R6/bin:/bin:/sbin:/home/nozarm/bin:/home/nozarm/PWA/bin:/home/nozarm/perl:/triumfcs/linux/bin:/home/nozarm/myclas/bin:/home/nozarm/myclas/bin/LinuxRH7
DESKTOP_SESSION=kde
INPUTRC=/etc/inputrc
PWD=/home/nozarm
CVSIGNORE=*.o.depend *.oo *.oo.depend dummy.depend
TWIST_MC=/twist/tw00z/systematics/mc
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HOME=/home/nozarm
SHLVL=3
OSTYPE=linux
VENDOR=intel
MACHTYPE=i386
LOGNAME=nozarm
CVS_RSH=ssh
PRINTER=U
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-LsHZcgw2h1
LESSOPEN=|/usr/bin/lesspipe.sh %s
LPDEST=U
ARCH=Linux
CVSEDITOR=xterm -e vi
DISPLAY=:0.0
G_BROKEN_FILENAMES=1
_=/usr/bin/kdeinit
KDE_FULL_SESSION=true
XCURSOR_THEME=default
XCURSOR_SIZE=
GTK_RC_FILES=/etc/gtk/gtkrc:/home/nozarm/.gtkrc:/home/nozarm/.kde/share/config/gtkrc
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/nozarm/.gtkrc-2.0:/home/nozarm/.kde/share/config/gtkrc
KDE_MULTIHEAD=false
SESSION_MANAGER=local/inspire.triumf.ca:/tmp/.ICE-unix/3891
COLORTERM=
KONSOLE_DCOP=DCOPRef(konsole-3963,konsole)
KONSOLE_DCOP_SESSION=DCOPRef(konsole-3963,session-1)
WINDOWID=33554439
/proc/cputinfo:
===============
Linux version 2.6.9-1.724_FC3 (bhcompile@bugs.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Sun Jan 2 15:43:49 EST
2005
/proc/modules:
==============
parport_pc 24705 1 - Live 0xe0bf9000
lp 11565 0 - Live 0xe0a90000
parport 36745 2 parport_pc,lp, Live 0xe0a9d000
autofs4 23109 1 - Live 0xe0a6d000
sunrpc 156709 1 - Live 0xe0c1d000
ds 17349 4 - Live 0xe0a14000
hsfusbcd2 60952 0 - Live 0xe0bdf000
hsfmc97sis 51984 0 - Live 0xe0bd1000
hsfmc97ati 49936 0 - Live 0xe0bc3000
hsfmc97ali 56212 0 - Live 0xe0bb4000
hsfmc97via 53400 0 - Live 0xe0ba5000
hsfmc97ich 55184 0 - Live 0xe0b76000
hsfpcibasic2 60560 0 - Live 0xe0b66000
hsfserial 24100 7 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2, Live 0xe0a74000
hsfengine 1303828 1 hsfserial, Live 0xe0d24000
hsfosspec 112612 12 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2,hsfserial,hsfengine, Live 0xe0b88000
hsfsoar 57856 7 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2, Live 0xe0a80000
button 6481 0 - Live 0xe0a6a000
battery 8517 0 - Live 0xe0a66000
asus_acpi 10965 0 - Live 0xe0a04000
ac 4805 0 - Live 0xe0a11000
md5 4033 1 - Live 0xe0a09000
ipv6 230529 10 - Live 0xe0aab000
ohci1394 34521 0 - Live 0xe09c8000
ieee1394 303129 1 ohci1394, Live 0xe0a1a000
yenta_socket 19009 0 - Live 0xe09a1000
pcmcia_core 59785 2 ds,yenta_socket, Live 0xe09ac000
uhci_hcd 31065 0 - Live 0xe094b000
ehci_hcd 30661 0 - Live 0xe0955000
snd_intel8x0 34829 0 - Live 0xe0931000
snd_ac97_codec 63761 1 snd_intel8x0, Live 0xe0988000
snd_pcm_oss 48377 0 - Live 0xe097b000
snd_mixer_oss 17985 1 snd_pcm_oss, Live 0xe0945000
snd_pcm 94921 2 snd_intel8x0,snd_pcm_oss, Live 0xe0962000
snd_timer 28997 1 snd_pcm, Live 0xe093c000
snd_page_alloc 9673 2 snd_intel8x0,snd_pcm, Live 0xe0918000
gameport 4801 1 snd_intel8x0, Live 0xe0871000
snd_mpu401_uart 8769 1 snd_intel8x0, Live 0xe086d000
snd_rawmidi 26085 1 snd_mpu401_uart, Live 0xe0876000
snd_seq_device 8137 1 snd_rawmidi, Live 0xe0850000
snd 53541 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xe08d2
000
soundcore 9889 1 snd, Live 0xe084c000
ipw2200 62029 0 - Live 0xe08c1000
ieee80211 19269 1 ipw2200, Live 0xe0853000
ieee80211_crypt 6469 1 ieee80211, Live 0xe0849000
tg3 83653 0 - Live 0xe0902000
dm_snapshot 17029 0 - Live 0xe0843000
dm_zero 2369 0 - Live 0xe0806000
dm_mirror 22957 2 - Live 0xe082b000
ext3 116553 2 - Live 0xe08e4000
jbd 71257 1 ext3, Live 0xe085a000
dm_mod 54229 6 dm_snapshot,dm_zero,dm_mirror, Live 0xe0834000
/proc/ioports:
=============
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0400-047f : 0000:00:1f.0
0400-0403 : PM1a_EVT_BLK
0404-0405 : PM1a_CNT_BLK
0408-040b : PM_TMR
0420-0420 : PM2_CNT_BLK
0428-042f : GPE0_BLK
0500-053f : 0000:00:1f.0
0cf8-0cff : PCI conf1
4000-40ff : PCI CardBus #03
4400-44ff : PCI CardBus #03
4800-48ff : PCI CardBus #07
4c00-4cff : PCI CardBus #07
d000-dfff : PCI Bus #01
d800-d8ff : 0000:01:00.0
e000-e03f : 0000:00:1f.5
e000-e03f : Intel 82801DB-ICH4
e080-e0ff : 0000:00:1f.6
e080-e0ff : hsfmc97ich
e400-e4ff : 0000:00:1f.6
e400-e4ff : hsfmc97ich
e800-e81f : 0000:00:1d.0
e800-e81f : uhci_hcd
e880-e89f : 0000:00:1d.1
e880-e89f : uhci_hcd
ec00-ec1f : 0000:00:1d.2
ec00-ec1f : uhci_hcd
ee00-eeff : 0000:00:1f.5
ee00-eeff : Intel 82801DB-ICH4
ffa0-ffaf : 0000:00:1f.1
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
/proc/iomem:
============
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ff3ffff : System RAM
00100000-002f92f2 : Kernel code
002f92f3-003a23ff : Kernel data
1ff40000-1ff4ffff : ACPI Tables
1ff50000-1fffffff : ACPI Non-volatile Storage
20000000-200003ff : 0000:00:1f.1
20001000-20001fff : 0000:02:01.1
20001000-20001fff : yenta_socket
20002000-20002fff : 0000:02:01.0
20002000-20002fff : yenta_socket
20400000-207fffff : PCI CardBus #03
20800000-20bfffff : PCI CardBus #03
20c00000-20ffffff : PCI CardBus #07
21000000-213fffff : PCI CardBus #07
ce900000-de9fffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
e0000000-efffffff : 0000:00:00.0
ff800000-ff8fffff : PCI Bus #01
ff8f0000-ff8fffff : 0000:01:00.0
ff9ee000-ff9eefff : 0000:02:02.0
ff9ef800-ff9effff : 0000:02:01.2
ff9ef800-ff9effff : ohci1394
ff9f0000-ff9fffff : 0000:02:00.0
ff9f0000-ff9fffff : tg3
ffaff400-ffaff4ff : 0000:00:1f.5
ffaff400-ffaff4ff : Intel 82801DB-ICH4
ffaff800-ffaff9ff : 0000:00:1f.5
ffaff800-ffaff9ff : Intel 82801DB-ICH4
ffaffc00-ffafffff : 0000:00:1d.7
ffaffc00-ffafffff : ehci_hcd
lspci -vvv:
===========
00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21)
Subsystem: ASUSTeK Computer Inc.: Unknown device 186a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: ce900000-de9fffff
Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at e800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at e880 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at ec00 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1868
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at ffaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: ff900000-ff9fffff
Prefetchable memory behind bridge: dea00000-deafffff
Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1869
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1713
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 4
Region 0: I/O ports at ee00 [size=256]
Region 1: I/O ports at e000 [size=64]
Region 2: Memory at ffaff800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ffaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1826
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 4
Region 0: I/O ports at e400 [size=256]
Region 1: I/O ports at e080 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1772
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size 10
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff8c0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1735
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size 10
Interrupt: pin A routed to IRQ 4
Region 0: Memory at ff9f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: fffffdffbff7bf7c Data: fdfc
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1864
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 4
Region 0: Memory at 20002000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1864
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 20c00000-20fff000 (prefetchable)
Memory window 1: 21000000-213ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1867
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 10
Region 0: Memory at ff9ef800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
Subsystem: Intel Corp.: Unknown device 2701
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 4
Region 0: Memory at ff9ee000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
/proc/scsi/scsi:
================
No scsi devices
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Error messages with ACPI
2005-03-05 18:09 Error messages with ACPI Mina Nozar
@ 2005-03-05 20:05 ` Richard Mittendorfer
2005-03-18 3:35 ` Len Brown
1 sibling, 0 replies; 3+ messages in thread
From: Richard Mittendorfer @ 2005-03-05 20:05 UTC (permalink / raw)
To: linux-kernel
Also sprach Mina Nozar <nozarm@triumf.ca> (Sat, 5 Mar 2005 10:09:41
-0800 (PST)):
> Hi,
hi mina.
> [...]
> kernel: ACPI-1133: *** Error: Method execution failed
> [\_SB_.BAT0._BST](Node dfe043c0), AE_AML_NO_RETURN_VALUE
> lastt message repeated 2 times
> last message repeated 4 times
> ...
> ...
(afaik) these are not critical - they come from the yout acpi bios.
these implementions are known to be bad. you can find more information
on the acpi homepage[1]. maybe you can fix this with a modifcated dsdt
from there - but i'm not sure if it's worth the work.
do you get valid entries in /proc/acpi and are your battery states ok?
then you most likely have no problem. on my old libretto i get tons of
them at bootup and sometimes when comming out of suspend.
however, if your logs get filled with those messages ...
sl ritch.
[1] http://acpi.sourceforge.net/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Error messages with ACPI
2005-03-05 18:09 Error messages with ACPI Mina Nozar
2005-03-05 20:05 ` Richard Mittendorfer
@ 2005-03-18 3:35 ` Len Brown
1 sibling, 0 replies; 3+ messages in thread
From: Len Brown @ 2005-03-18 3:35 UTC (permalink / raw)
To: Mina Nozar; +Cc: linux-kernel
On Sat, 2005-03-05 at 13:09, Mina Nozar wrote:
> kernel: ACPI-1133: *** Error: Method execution failed
> [\_SB_.BAT0._BST]
> (Node dfe043c0), AE_AML_NO_RETURN_VALUE
Please try the latest mm tree and report if these go away.
thanks,
-Len
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-03-18 3:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-03-05 18:09 Error messages with ACPI Mina Nozar
2005-03-05 20:05 ` Richard Mittendorfer
2005-03-18 3:35 ` Len Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).