[PATCH 00/24] Input patches for 2.6.15

[PATCH 00/24] Input patches for 2.6.15

[Dmitry Torokhov]

Hi Linus,

Please consider pulling from:

	git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git

Nothing terribly important except for a fix for some optical PS/2
mice going to sleep and turning their light off as soon as psmouse
tried to initialize them.

Changelog:

    Input: ibmasm - convert to dynamic input_dev allocation (Vernon Mauery)
    Input: i8042 - add OQO Zepto to noloop dmi table (Ben Collins)
    Input: add missing keys from input.h to hid-debug.h (Michael Hanselmann)
    Input: atkbd - don't lose keymap settings when reconnecting keyboard
    Input: wistron - convert to the new platform device interface
    Input: maceps2 - convert to the new platform device interface
    Input: q40kbd - convert to the new platform device interface
    Input: ct82c710 - convert to the new platform device interface
    Input: i8042 - convert to the new platform device interface
    Input: logips2pp - add signature of MouseMan Wheel Mouse (87)
    Input: sparcspkr - register with driver core as a platfrom device
    Input: m68kspkr - register with driver core as a platfrom device
    Input: pcspkr - register with driver core as a platfrom device
    Input: lifebook - add DMI signature of Fujitsu Lifebook B142 (Daniele Gozzi)
    Input: add help entry for FM801 gameport driver to Kconfig
    Input: i8042 - disable MUX mode for Sharp MM20
    Input: psmouse - don't leave mouse asleep
    Input: ALPS - add signature for HP ze1115 (Larry Finger)
    Input: appletouch - add support for Geyser 2 (Michael Hanselmann)
    Input: add the fn key to hid-debug.h (Michael Hanselmann)
    Input: wistron - add Acer TravelMate 240 to DMI table (Ashutosh Naik)
    Input: logips2pp - add new signature (85) (Jasper Spaans)
    Input: mousedev - make module parameters visible in sysfs
    Input: evdev - consolidate compat and regular code

Diffstat:

 Documentation/input/appletouch.txt    |    5 
 drivers/input/evdev.c                 |  491 ++++++++++++++--------------------
 drivers/input/gameport/Kconfig        |    7 
 drivers/input/keyboard/atkbd.c        |    2 
 drivers/input/misc/m68kspkr.c         |  104 +++++--
 drivers/input/misc/pcspkr.c           |   86 +++++
 drivers/input/misc/sparcspkr.c        |  162 +++++++----
 drivers/input/misc/wistron_btns.c     |  133 ++++++---
 drivers/input/mouse/alps.c            |    1 
 drivers/input/mouse/lifebook.c        |    7 
 drivers/input/mouse/logips2pp.c       |    2 
 drivers/input/mouse/psmouse-base.c    |   15 -
 drivers/input/mousedev.c              |   10 
 drivers/input/serio/ct82c710.c        |   89 ++++--
 drivers/input/serio/i8042-x86ia64io.h |   15 +
 drivers/input/serio/i8042.c           |  116 ++++----
 drivers/input/serio/maceps2.c         |   68 +++-
 drivers/input/serio/q40kbd.c          |   91 ++++--
 drivers/misc/ibmasm/ibmasm.h          |    6 
 drivers/misc/ibmasm/remote.c          |   82 +++--
 drivers/usb/input/appletouch.c        |  145 +++++++---
 drivers/usb/input/hid-debug.h         |   15 +
 22 files changed, 1032 insertions(+), 620 deletions(-)

Thanks!

--
Dmitry

[PATCH 01/24] evdev: consolidate compat and normal code

[Dmitry Torokhov]

[-- Attachment #1: evdev-compat-mess.patch --]
[-- Type: text/plain, Size: 19424 bytes --]

Input: evdev - consolidate compat and regular code

Compat and normal code mirror each other and are hard to maintain.
When EV_SW was added compat_ioctl case was missed. Here is my attempt
at consolidating the code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/evdev.c |  491 +++++++++++++++++++++-----------------------------
 1 files changed, 212 insertions(+), 279 deletions(-)

Index: work/drivers/input/evdev.c
===================================================================
--- work.orig/drivers/input/evdev.c
+++ work/drivers/input/evdev.c
@@ -146,6 +146,7 @@ static int evdev_open(struct inode * ino
 }
 
 #ifdef CONFIG_COMPAT
+
 struct input_event_compat {
 	struct compat_timeval time;
 	__u16 type;
@@ -165,98 +166,107 @@ struct input_event_compat {
 #  define COMPAT_TEST test_thread_flag(TIF_32BIT)
 #endif
 
-static ssize_t evdev_write_compat(struct file * file, const char __user * buffer, size_t count, loff_t *ppos)
+static inline size_t evdev_event_size(void)
 {
-	struct evdev_list *list = file->private_data;
-	struct input_event_compat event;
-	int retval = 0;
+	return COMPAT_TEST ?
+		sizeof(struct input_event_compat) : sizeof(struct input_event);
+}
 
-	while (retval < count) {
-		if (copy_from_user(&event, buffer + retval, sizeof(struct input_event_compat)))
+static int evdev_event_from_user(const char __user *buffer, struct input_event *event)
+{
+	if (COMPAT_TEST) {
+		struct input_event_compat compat_event;
+
+		if (copy_from_user(&compat_event, buffer, sizeof(struct input_event_compat)))
+			return -EFAULT;
+
+		event->time.tv_sec = compat_event.time.tv_sec;
+		event->time.tv_usec = compat_event.time.tv_usec;
+		event->type = compat_event.type;
+		event->code = compat_event.code;
+		event->value = compat_event.value;
+
+	} else {
+		if (copy_from_user(event, buffer, sizeof(struct input_event)))
 			return -EFAULT;
-		input_event(list->evdev->handle.dev, event.type, event.code, event.value);
-		retval += sizeof(struct input_event_compat);
 	}
 
-	return retval;
+	return 0;
 }
-#endif
 
-static ssize_t evdev_write(struct file * file, const char __user * buffer, size_t count, loff_t *ppos)
+static int evdev_event_to_user(char __user *buffer, const struct input_event *event)
 {
-	struct evdev_list *list = file->private_data;
-	struct input_event event;
-	int retval = 0;
+	if (COMPAT_TEST) {
+		struct input_event_compat compat_event;
 
-	if (!list->evdev->exist) return -ENODEV;
+		compat_event.time.tv_sec = event->time.tv_sec;
+		compat_event.time.tv_usec = event->time.tv_usec;
+		compat_event.type = event->type;
+		compat_event.code = event->code;
+		compat_event.value = event->value;
 
-#ifdef CONFIG_COMPAT
-	if (COMPAT_TEST)
-		return evdev_write_compat(file, buffer, count, ppos);
-#endif
-
-	while (retval < count) {
+		if (copy_to_user(buffer, &compat_event, sizeof(struct input_event_compat)))
+			return -EFAULT;
 
-		if (copy_from_user(&event, buffer + retval, sizeof(struct input_event)))
+	} else {
+		if (copy_to_user(buffer, event, sizeof(struct input_event)))
 			return -EFAULT;
-		input_event(list->evdev->handle.dev, event.type, event.code, event.value);
-		retval += sizeof(struct input_event);
 	}
 
-	return retval;
+	return 0;
 }
 
-#ifdef CONFIG_COMPAT
-static ssize_t evdev_read_compat(struct file * file, char __user * buffer, size_t count, loff_t *ppos)
+#else
+
+static inline size_t evdev_event_size(void)
 {
-	struct evdev_list *list = file->private_data;
-	int retval;
+	return sizeof(struct input_event);
+}
 
-	if (count < sizeof(struct input_event_compat))
-		return -EINVAL;
+static int evdev_event_from_user(const char __user *buffer, struct input_event *event)
+{
+	if (copy_from_user(event, buffer, sizeof(struct input_event)))
+		return -EFAULT;
 
-	if (list->head == list->tail && list->evdev->exist && (file->f_flags & O_NONBLOCK))
-		return -EAGAIN;
+	return 0;
+}
 
-	retval = wait_event_interruptible(list->evdev->wait,
-		list->head != list->tail || (!list->evdev->exist));
+static int evdev_event_to_user(char __user *buffer, const struct input_event *event)
+{
+	if (copy_to_user(buffer, event, sizeof(struct input_event)))
+		return -EFAULT;
 
-	if (retval)
-		return retval;
+	return 0;
+}
+
+#endif /* CONFIG_COMPAT */
+
+static ssize_t evdev_write(struct file * file, const char __user * buffer, size_t count, loff_t *ppos)
+{
+	struct evdev_list *list = file->private_data;
+	struct input_event event;
+	int retval = 0;
 
 	if (!list->evdev->exist)
 		return -ENODEV;
 
-	while (list->head != list->tail && retval + sizeof(struct input_event_compat) <= count) {
-		struct input_event *event = (struct input_event *) list->buffer + list->tail;
-		struct input_event_compat event_compat;
-		event_compat.time.tv_sec = event->time.tv_sec;
-		event_compat.time.tv_usec = event->time.tv_usec;
-		event_compat.type = event->type;
-		event_compat.code = event->code;
-		event_compat.value = event->value;
+	while (retval < count) {
 
-		if (copy_to_user(buffer + retval, &event_compat,
-			sizeof(struct input_event_compat))) return -EFAULT;
-		list->tail = (list->tail + 1) & (EVDEV_BUFFER_SIZE - 1);
-		retval += sizeof(struct input_event_compat);
+		if (evdev_event_from_user(buffer + retval, &event))
+			return -EFAULT;
+		input_event(list->evdev->handle.dev, event.type, event.code, event.value);
+		retval += evdev_event_size();
 	}
 
 	return retval;
 }
-#endif
 
 static ssize_t evdev_read(struct file * file, char __user * buffer, size_t count, loff_t *ppos)
 {
 	struct evdev_list *list = file->private_data;
 	int retval;
 
-#ifdef CONFIG_COMPAT
-	if (COMPAT_TEST)
-		return evdev_read_compat(file, buffer, count, ppos);
-#endif
-
-	if (count < sizeof(struct input_event))
+	if (count < evdev_event_size())
 		return -EINVAL;
 
 	if (list->head == list->tail && list->evdev->exist && (file->f_flags & O_NONBLOCK))
@@ -271,11 +281,15 @@ static ssize_t evdev_read(struct file * 
 	if (!list->evdev->exist)
 		return -ENODEV;
 
-	while (list->head != list->tail && retval + sizeof(struct input_event) <= count) {
-		if (copy_to_user(buffer + retval, list->buffer + list->tail,
-			sizeof(struct input_event))) return -EFAULT;
+	while (list->head != list->tail && retval + evdev_event_size() <= count) {
+
+		struct input_event *event = (struct input_event *) list->buffer + list->tail;
+
+		if (evdev_event_to_user(buffer + retval, event))
+			return -EFAULT;
+
 		list->tail = (list->tail + 1) & (EVDEV_BUFFER_SIZE - 1);
-		retval += sizeof(struct input_event);
+		retval += evdev_event_size();
 	}
 
 	return retval;
@@ -290,17 +304,95 @@ static unsigned int evdev_poll(struct fi
 		(list->evdev->exist ? 0 : (POLLHUP | POLLERR));
 }
 
-static long evdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+#ifdef CONFIG_COMPAT
+
+#define BITS_PER_LONG_COMPAT (sizeof(compat_long_t) * 8)
+#define NBITS_COMPAT(x) ((((x) - 1) / BITS_PER_LONG_COMPAT) + 1)
+
+#ifdef __BIG_ENDIAN
+static int bits_to_user(unsigned long *bits, unsigned int maxbit,
+			unsigned int maxlen, void __user *p, int compat)
+{
+	int len, i;
+
+	if (compat) {
+		len = NBITS_COMPAT(maxbit) * sizeof(compat_long_t);
+		if (len < maxlen)
+			len = maxlen;
+
+		for (i = 0; i < len / sizeof(compat_long_t); i++)
+			if (copy_to_user((compat_long_t __user *) p + i,
+					 (compat_long_t *) bits +
+						i + 1 - ((i % 2) << 1),
+					 sizeof(compat_long_t)))
+				return -EFAULT;
+	} else {
+		len = NBITS(maxbit) * sizeof(long);
+		if (len > maxlen)
+			len = maxlen;
+
+		if (copy_to_user(p, bits, len))
+			return -EFAULT;
+	}
+
+	return len;
+}
+#else
+static int bits_to_user(unsigned long *bits, unsigned int maxbit,
+			unsigned int maxlen, void __user *p, int compat)
+{
+	int len = compat ?
+			NBITS_COMPAT(maxbit) * sizeof(compat_long_t) :
+			NBITS(maxbit) * sizeof(long);
+
+	if (len > maxlen)
+		len = maxlen;
+
+	return copy_to_user(p, bits, len) ? -EFAULT : len;
+}
+#endif /* __BIG_ENDIAN */
+
+#else
+
+static int bits_to_user(unsigned long *bits, unsigned int maxbit,
+			unsigned int maxlen, void __user *p, int compat)
+{
+	int len = NBITS(maxbit) * sizeof(long);
+
+	if (len > maxlen)
+		len = maxlen;
+
+	return copy_to_user(p, bits, len) ? -EFAULT : len;
+}
+
+#endif /* CONFIG_COMPAT */
+
+static int str_to_user(const char *str, unsigned int maxlen, void __user *p)
+{
+	int len;
+
+	if (!str)
+		return -ENOENT;
+
+	len = strlen(str) + 1;
+	if (len > maxlen)
+		len = maxlen;
+
+	return copy_to_user(p, str, len) ? -EFAULT : len;
+}
+
+static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
+				void __user *p, int compat_mode)
 {
 	struct evdev_list *list = file->private_data;
 	struct evdev *evdev = list->evdev;
 	struct input_dev *dev = evdev->handle.dev;
 	struct input_absinfo abs;
-	void __user *p = (void __user *)arg;
-	int __user *ip = (int __user *)arg;
+	int __user *ip = (int __user *)p;
 	int i, t, u, v;
 
-	if (!evdev->exist) return -ENODEV;
+	if (!evdev->exist)
+		return -ENODEV;
 
 	switch (cmd) {
 
@@ -308,26 +400,39 @@ static long evdev_ioctl(struct file *fil
 			return put_user(EV_VERSION, ip);
 
 		case EVIOCGID:
-			return copy_to_user(p, &dev->id, sizeof(struct input_id)) ? -EFAULT : 0;
+			if (copy_to_user(p, &dev->id, sizeof(struct input_id)))
+				return -EFAULT;
+
+			return 0;
 
 		case EVIOCGKEYCODE:
-			if (get_user(t, ip)) return -EFAULT;
-			if (t < 0 || t >= dev->keycodemax || !dev->keycodesize) return -EINVAL;
-			if (put_user(INPUT_KEYCODE(dev, t), ip + 1)) return -EFAULT;
+			if (get_user(t, ip))
+				return -EFAULT;
+			if (t < 0 || t >= dev->keycodemax || !dev->keycodesize)
+				return -EINVAL;
+			if (put_user(INPUT_KEYCODE(dev, t), ip + 1))
+				return -EFAULT;
 			return 0;
 
 		case EVIOCSKEYCODE:
-			if (get_user(t, ip)) return -EFAULT;
-			if (t < 0 || t >= dev->keycodemax || !dev->keycodesize) return -EINVAL;
-			if (get_user(v, ip + 1)) return -EFAULT;
-			if (v < 0 || v > KEY_MAX) return -EINVAL;
-			if (dev->keycodesize < sizeof(v) && (v >> (dev->keycodesize * 8))) return -EINVAL;
+			if (get_user(t, ip))
+				return -EFAULT;
+			if (t < 0 || t >= dev->keycodemax || !dev->keycodesize)
+				return -EINVAL;
+			if (get_user(v, ip + 1))
+				return -EFAULT;
+			if (v < 0 || v > KEY_MAX)
+				return -EINVAL;
+			if (dev->keycodesize < sizeof(v) && (v >> (dev->keycodesize * 8)))
+				return -EINVAL;
+
 			u = SET_INPUT_KEYCODE(dev, t, v);
 			clear_bit(u, dev->keybit);
 			set_bit(v, dev->keybit);
 			for (i = 0; i < dev->keycodemax; i++)
-				if (INPUT_KEYCODE(dev,i) == u)
+				if (INPUT_KEYCODE(dev, i) == u)
 					set_bit(u, dev->keybit);
+
 			return 0;
 
 		case EVIOCSFF:
@@ -338,17 +443,17 @@ static long evdev_ioctl(struct file *fil
 				if (copy_from_user(&effect, p, sizeof(effect)))
 					return -EFAULT;
 				err = dev->upload_effect(dev, &effect);
-				if (put_user(effect.id, &(((struct ff_effect __user *)arg)->id)))
+				if (put_user(effect.id, &(((struct ff_effect __user *)p)->id)))
 					return -EFAULT;
 				return err;
-			}
-			else return -ENOSYS;
+			} else
+				return -ENOSYS;
 
 		case EVIOCRMFF:
-			if (dev->erase_effect) {
-				return dev->erase_effect(dev, (int)arg);
-			}
-			else return -ENOSYS;
+			if (!dev->erase_effect)
+				return -ENOSYS;
+
+			return dev->erase_effect(dev, (int)(unsigned long) p);
 
 		case EVIOCGEFFECTS:
 			if (put_user(dev->ff_effects_max, ip))
@@ -356,7 +461,7 @@ static long evdev_ioctl(struct file *fil
 			return 0;
 
 		case EVIOCGRAB:
-			if (arg) {
+			if (p) {
 				if (evdev->grab)
 					return -EBUSY;
 				if (input_grab_device(&evdev->handle))
@@ -395,62 +500,33 @@ static long evdev_ioctl(struct file *fil
 						case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
 						default: return -EINVAL;
 					}
-					len = NBITS(len) * sizeof(long);
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, bits, len) ? -EFAULT : len;
+					return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
 				}
 
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0))) {
-					int len;
-					len = NBITS(KEY_MAX) * sizeof(long);
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->key, len) ? -EFAULT : len;
-				}
+				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
+					return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
+							    p, compat_mode);
 
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGLED(0))) {
-					int len;
-					len = NBITS(LED_MAX) * sizeof(long);
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->led, len) ? -EFAULT : len;
-				}
+				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGLED(0)))
+					return bits_to_user(dev->led, LED_MAX, _IOC_SIZE(cmd),
+							    p, compat_mode);
 
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSND(0))) {
-					int len;
-					len = NBITS(SND_MAX) * sizeof(long);
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->snd, len) ? -EFAULT : len;
-				}
+				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSND(0)))
+					return bits_to_user(dev->snd, SND_MAX, _IOC_SIZE(cmd),
+							    p, compat_mode);
 
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSW(0))) {
-					int len;
-					len = NBITS(SW_MAX) * sizeof(long);
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->sw, len) ? -EFAULT : len;
-				}
+				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSW(0)))
+					return bits_to_user(dev->sw, SW_MAX, _IOC_SIZE(cmd),
+							    p, compat_mode);
 
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0))) {
-					int len;
-					if (!dev->name) return -ENOENT;
-					len = strlen(dev->name) + 1;
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->name, len) ? -EFAULT : len;
-				}
+				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
+					return str_to_user(dev->name, _IOC_SIZE(cmd), p);
 
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0))) {
-					int len;
-					if (!dev->phys) return -ENOENT;
-					len = strlen(dev->phys) + 1;
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->phys, len) ? -EFAULT : len;
-				}
+				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0)))
+					return str_to_user(dev->phys, _IOC_SIZE(cmd), p);
 
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGUNIQ(0))) {
-					int len;
-					if (!dev->uniq) return -ENOENT;
-					len = strlen(dev->uniq) + 1;
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->uniq, len) ? -EFAULT : len;
-				}
+				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGUNIQ(0)))
+					return str_to_user(dev->uniq, _IOC_SIZE(cmd), p);
 
 				if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
 
@@ -492,158 +568,15 @@ static long evdev_ioctl(struct file *fil
 	return -EINVAL;
 }
 
-#ifdef CONFIG_COMPAT
-
-#define BITS_PER_LONG_COMPAT (sizeof(compat_long_t) * 8)
-#define NBITS_COMPAT(x) ((((x)-1)/BITS_PER_LONG_COMPAT)+1)
-#define OFF_COMPAT(x)  ((x)%BITS_PER_LONG_COMPAT)
-#define BIT_COMPAT(x)  (1UL<<OFF_COMPAT(x))
-#define LONG_COMPAT(x) ((x)/BITS_PER_LONG_COMPAT)
-#define test_bit_compat(bit, array) ((array[LONG_COMPAT(bit)] >> OFF_COMPAT(bit)) & 1)
-
-#ifdef __BIG_ENDIAN
-#define bit_to_user(bit, max) \
-do { \
-	int i; \
-	int len = NBITS_COMPAT((max)) * sizeof(compat_long_t); \
-	if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); \
-	for (i = 0; i < len / sizeof(compat_long_t); i++) \
-		if (copy_to_user((compat_long_t __user *) p + i, \
-				 (compat_long_t*) (bit) + i + 1 - ((i % 2) << 1), \
-				 sizeof(compat_long_t))) \
-			return -EFAULT; \
-	return len; \
-} while (0)
-#else
-#define bit_to_user(bit, max) \
-do { \
-	int len = NBITS_COMPAT((max)) * sizeof(compat_long_t); \
-	if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); \
-	return copy_to_user(p, (bit), len) ? -EFAULT : len; \
-} while (0)
-#endif
+static long evdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	return evdev_ioctl_handler(file, cmd, (void __user *)arg, 0);
+}
 
+#ifdef CONFIG_COMPAT
 static long evdev_ioctl_compat(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct evdev_list *list = file->private_data;
-	struct evdev *evdev = list->evdev;
-	struct input_dev *dev = evdev->handle.dev;
-	struct input_absinfo abs;
-	void __user *p = compat_ptr(arg);
-
-	if (!evdev->exist) return -ENODEV;
-
-	switch (cmd) {
-
-		case EVIOCGVERSION:
-		case EVIOCGID:
-		case EVIOCGKEYCODE:
-		case EVIOCSKEYCODE:
-		case EVIOCSFF:
-		case EVIOCRMFF:
-		case EVIOCGEFFECTS:
-		case EVIOCGRAB:
-			return evdev_ioctl(file, cmd, (unsigned long) p);
-
-		default:
-
-			if (_IOC_TYPE(cmd) != 'E')
-				return -EINVAL;
-
-			if (_IOC_DIR(cmd) == _IOC_READ) {
-
-				if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0,0))) {
-					long *bits;
-					int max;
-
-					switch (_IOC_NR(cmd) & EV_MAX) {
-						case      0: bits = dev->evbit;  max = EV_MAX;  break;
-						case EV_KEY: bits = dev->keybit; max = KEY_MAX; break;
-						case EV_REL: bits = dev->relbit; max = REL_MAX; break;
-						case EV_ABS: bits = dev->absbit; max = ABS_MAX; break;
-						case EV_MSC: bits = dev->mscbit; max = MSC_MAX; break;
-						case EV_LED: bits = dev->ledbit; max = LED_MAX; break;
-						case EV_SND: bits = dev->sndbit; max = SND_MAX; break;
-						case EV_FF:  bits = dev->ffbit;  max = FF_MAX;  break;
-						case EV_SW:  bits = dev->swbit;  max = SW_MAX;  break;
-						default: return -EINVAL;
-					}
-					bit_to_user(bits, max);
-				}
-
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
-					bit_to_user(dev->key, KEY_MAX);
-
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGLED(0)))
-					bit_to_user(dev->led, LED_MAX);
-
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSND(0)))
-					bit_to_user(dev->snd, SND_MAX);
-
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGSW(0)))
-					bit_to_user(dev->sw, SW_MAX);
-
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0))) {
-					int len;
-					if (!dev->name) return -ENOENT;
-					len = strlen(dev->name) + 1;
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->name, len) ? -EFAULT : len;
-				}
-
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0))) {
-					int len;
-					if (!dev->phys) return -ENOENT;
-					len = strlen(dev->phys) + 1;
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->phys, len) ? -EFAULT : len;
-				}
-
-				if (_IOC_NR(cmd) == _IOC_NR(EVIOCGUNIQ(0))) {
-					int len;
-					if (!dev->uniq) return -ENOENT;
-					len = strlen(dev->uniq) + 1;
-					if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd);
-					return copy_to_user(p, dev->uniq, len) ? -EFAULT : len;
-				}
-
-				if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
-
-					int t = _IOC_NR(cmd) & ABS_MAX;
-
-					abs.value = dev->abs[t];
-					abs.minimum = dev->absmin[t];
-					abs.maximum = dev->absmax[t];
-					abs.fuzz = dev->absfuzz[t];
-					abs.flat = dev->absflat[t];
-
-					if (copy_to_user(p, &abs, sizeof(struct input_absinfo)))
-						return -EFAULT;
-
-					return 0;
-				}
-			}
-
-			if (_IOC_DIR(cmd) == _IOC_WRITE) {
-
-				if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
-
-					int t = _IOC_NR(cmd) & ABS_MAX;
-
-					if (copy_from_user(&abs, p, sizeof(struct input_absinfo)))
-						return -EFAULT;
-
-					dev->abs[t] = abs.value;
-					dev->absmin[t] = abs.minimum;
-					dev->absmax[t] = abs.maximum;
-					dev->absfuzz[t] = abs.fuzz;
-					dev->absflat[t] = abs.flat;
-
-					return 0;
-				}
-			}
-	}
-	return -EINVAL;
+	return evdev_ioctl_handler(file, cmd, compat_ptr(arg), 1);
 }
 #endif
 

[PATCH 02/24] Mousedev: make module parameters visible in sysfs

[Dmitry Torokhov]

[-- Attachment #1: mousedev-params-in-sysfs.patch --]
[-- Type: text/plain, Size: 1815 bytes --]

Input: mousedev - make module parameters visible in sysfs

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/mousedev.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

Index: work/drivers/input/mousedev.c
===================================================================
--- work.orig/drivers/input/mousedev.c
+++ work/drivers/input/mousedev.c
@@ -40,15 +40,15 @@ MODULE_LICENSE("GPL");
 #endif
 
 static int xres = CONFIG_INPUT_MOUSEDEV_SCREEN_X;
-module_param(xres, uint, 0);
+module_param(xres, uint, 0644);
 MODULE_PARM_DESC(xres, "Horizontal screen resolution");
 
 static int yres = CONFIG_INPUT_MOUSEDEV_SCREEN_Y;
-module_param(yres, uint, 0);
+module_param(yres, uint, 0644);
 MODULE_PARM_DESC(yres, "Vertical screen resolution");
 
 static unsigned tap_time = 200;
-module_param(tap_time, uint, 0);
+module_param(tap_time, uint, 0644);
 MODULE_PARM_DESC(tap_time, "Tap time for touchpads in absolute mode (msecs)");
 
 struct mousedev_hw_data {
@@ -155,7 +155,7 @@ static void mousedev_abs_event(struct in
 	switch (code) {
 		case ABS_X:
 			size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
-			if (size == 0) size = xres;
+			if (size == 0) size = xres ? : 1;
 			if (value > dev->absmax[ABS_X]) value = dev->absmax[ABS_X];
 			if (value < dev->absmin[ABS_X]) value = dev->absmin[ABS_X];
 			mousedev->packet.x = ((value - dev->absmin[ABS_X]) * xres) / size;
@@ -164,7 +164,7 @@ static void mousedev_abs_event(struct in
 
 		case ABS_Y:
 			size = dev->absmax[ABS_Y] - dev->absmin[ABS_Y];
-			if (size == 0) size = yres;
+			if (size == 0) size = yres ? : 1;
 			if (value > dev->absmax[ABS_Y]) value = dev->absmax[ABS_Y];
 			if (value < dev->absmin[ABS_Y]) value = dev->absmin[ABS_Y];
 			mousedev->packet.y = yres - ((value - dev->absmin[ABS_Y]) * yres) / size;

[PATCH 03/24] logips2pp: add new signature (85)

[Dmitry Torokhov]

[-- Attachment #1: logips2pp-add-signature-85.patch --]
[-- Type: text/plain, Size: 758 bytes --]

From: Jasper Spaans <jasper@vs19.net>

Input: logips2pp - add new signature (85)

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/mouse/logips2pp.c |    1 +
 1 files changed, 1 insertion(+)

Index: work/drivers/input/mouse/logips2pp.c
===================================================================
--- work.orig/drivers/input/mouse/logips2pp.c
+++ work/drivers/input/mouse/logips2pp.c
@@ -226,6 +226,7 @@ static struct ps2pp_info *get_model_info
 		{ 80,	PS2PP_KIND_WHEEL,	PS2PP_SIDE_BTN | PS2PP_WHEEL },
 		{ 81,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 83,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
+		{ 85,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 86,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 88,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 96,	0,			0 },

[PATCH 04/24] Wistron: add Acer TravelMate 240 to DMI table

[Dmitry Torokhov]

[-- Attachment #1: wistron-add-acer-tm240.patch --]
[-- Type: text/plain, Size: 1373 bytes --]

From: Ashutosh Naik <ashutosh.naik@gmail.com>

Input: wistron - add Acer TravelMate 240 to DMI table

Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/misc/wistron_btns.c |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+)

Index: work/drivers/input/misc/wistron_btns.c
===================================================================
--- work.orig/drivers/input/misc/wistron_btns.c
+++ work/drivers/input/misc/wistron_btns.c
@@ -296,6 +296,16 @@ static struct key_entry keymap_acer_aspi
 	{ KE_END, 0 }
 };
 
+static struct key_entry keymap_acer_travelmate_240[] = {
+	{ KE_KEY, 0x31, KEY_MAIL },
+	{ KE_KEY, 0x36, KEY_WWW },
+	{ KE_KEY, 0x11, KEY_PROG1 },
+	{ KE_KEY, 0x12, KEY_PROG2 },
+	{ KE_BLUETOOTH, 0x44, 0 },
+	{ KE_WIFI, 0x30, 0 },
+	{ KE_END, 0 }
+};
+
 /*
  * If your machine is not here (which is currently rather likely), please send
  * a list of buttons and their key codes (reported when loading this module
@@ -320,6 +330,15 @@ static struct dmi_system_id dmi_ids[] = 
 		},
 		.driver_data = keymap_acer_aspire_1500
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "Acer TravelMate 240",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 240"),
+		},
+		.driver_data = keymap_acer_travelmate_240
+	},
 	{ NULL, }
 };
 

[PATCH 05/24] add the fn key to hid-debug.h

[Dmitry Torokhov]

[-- Attachment #1: hid-debug-add-fn-key.patch --]
[-- Type: text/plain, Size: 779 bytes --]

From: Michael Hanselmann <linux-kernel@hansmi.ch>

Input: add the fn key to hid-debug.h

Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/usb/input/hid-debug.h |    1 +
 1 files changed, 1 insertion(+)

Index: work/drivers/usb/input/hid-debug.h
===================================================================
--- work.orig/drivers/usb/input/hid-debug.h
+++ work/drivers/usb/input/hid-debug.h
@@ -681,6 +681,7 @@ static char *keys[KEY_MAX + 1] = {
 	[KEY_SEND] = "Send",			[KEY_REPLY] = "Reply",
 	[KEY_FORWARDMAIL] = "ForwardMail",	[KEY_SAVE] = "Save",
 	[KEY_DOCUMENTS] = "Documents",
+	[KEY_FN] = "Fn",
 };
 
 static char *relatives[REL_MAX + 1] = {

[PATCH 06/24] Add Geyser 2 support to appletouch driver

[Dmitry Torokhov]

[-- Attachment #1: appletouch-add-geyser2-support.patch --]
[-- Type: text/plain, Size: 10195 bytes --]

From: Michael Hanselmann <linux-kernel@hansmi.ch>

Input: appletouch - add support for Geyser 2

This patch adds support for the Geyser 2 touchpads used on post Oct 2005
Apple PowerBooks to the appletouch driver.

Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Acked-by: Rene Nussbaumer <linux-kernel@killerfox.forkbomb.ch>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 Documentation/input/appletouch.txt |    5 -
 drivers/usb/input/appletouch.c     |  145 +++++++++++++++++++++++++++----------
 2 files changed, 112 insertions(+), 38 deletions(-)

Index: work/Documentation/input/appletouch.txt
===================================================================
--- work.orig/Documentation/input/appletouch.txt
+++ work/Documentation/input/appletouch.txt
@@ -3,7 +3,7 @@ Apple Touchpad Driver (appletouch)
 	Copyright (C) 2005 Stelian Pop <stelian@popies.net>
 
 appletouch is a Linux kernel driver for the USB touchpad found on post
-February 2005 Apple Alu Powerbooks.
+February 2005 and October 2005 Apple Aluminium Powerbooks.
 
 This driver is derived from Johannes Berg's appletrackpad driver[1], but it has
 been improved in some areas:
@@ -13,7 +13,8 @@ been improved in some areas:
 
 Credits go to Johannes Berg for reverse-engineering the touchpad protocol,
 Frank Arnold for further improvements, and Alex Harper for some additional
-information about the inner workings of the touchpad sensors.
+information about the inner workings of the touchpad sensors. Michael
+Hanselmann added support for the October 2005 models.
 
 Usage:
 ------
Index: work/drivers/usb/input/appletouch.c
===================================================================
--- work.orig/drivers/usb/input/appletouch.c
+++ work/drivers/usb/input/appletouch.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2005      Stelian Pop (stelian@popies.net)
  * Copyright (C) 2005      Frank Arnold (frank@scirocco-5v-turbo.de)
  * Copyright (C) 2005      Peter Osterlund (petero2@telia.com)
+ * Copyright (C) 2005      Michael Hanselmann (linux-kernel@hansmi.ch)
  *
  * Thanks to Alex Harper <basilisk@foobox.net> for his inputs.
  *
@@ -38,6 +39,11 @@
 /* Apple has powerbooks which have the keyboard with different Product IDs */
 #define APPLE_VENDOR_ID		0x05AC
 
+/* These names come from Info.plist in AppleUSBTrackpad.kext */
+#define GEYSER_ANSI_PRODUCT_ID	0x0214
+#define GEYSER_ISO_PRODUCT_ID	0x0215
+#define GEYSER_JIS_PRODUCT_ID	0x0216
+
 #define ATP_DEVICE(prod)					\
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |		\
 		       USB_DEVICE_ID_MATCH_INT_CLASS |		\
@@ -53,13 +59,17 @@ static struct usb_device_id atp_table []
 	{ ATP_DEVICE(0x020F) },
 	{ ATP_DEVICE(0x030A) },
 	{ ATP_DEVICE(0x030B) },
-	{ }					/* Terminating entry */
+
+	/* PowerBooks Oct 2005 */
+	{ ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) },
+	{ ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) },
+	{ ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) },
+
+	/* Terminating entry */
+	{ }
 };
 MODULE_DEVICE_TABLE (usb, atp_table);
 
-/* size of a USB urb transfer */
-#define ATP_DATASIZE	81
-
 /*
  * number of sensors. Note that only 16 instead of 26 X (horizontal)
  * sensors exist on 12" and 15" PowerBooks. All models have 16 Y
@@ -108,6 +118,8 @@ struct atp {
 	signed char		xy_old[ATP_XSENSORS + ATP_YSENSORS];
 						/* accumulated sensors */
 	int			xy_acc[ATP_XSENSORS + ATP_YSENSORS];
+	int			overflowwarn;	/* overflow warning printed? */
+	int			datalen;	/* size of an USB urb transfer */
 };
 
 #define dbg_dump(msg, tab) \
@@ -124,7 +136,7 @@ struct atp {
 		if (debug) printk(format, ##a);				\
 	} while (0)
 
-MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold");
+MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann");
 MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver");
 MODULE_LICENSE("GPL");
 
@@ -132,6 +144,16 @@ static int debug = 1;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Activate debugging output");
 
+/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */
+static inline int atp_is_geyser_2(struct atp *dev)
+{
+	int16_t productId = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+	return (productId == GEYSER_ANSI_PRODUCT_ID) ||
+		(productId == GEYSER_ISO_PRODUCT_ID) ||
+		(productId == GEYSER_JIS_PRODUCT_ID);
+}
+
 static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
 			     int *z, int *fingers)
 {
@@ -168,13 +190,20 @@ static inline void atp_report_fingers(st
 static void atp_complete(struct urb* urb, struct pt_regs* regs)
 {
 	int x, y, x_z, y_z, x_f, y_f;
-	int retval, i;
+	int retval, i, j;
 	struct atp *dev = urb->context;
 
 	switch (urb->status) {
 	case 0:
 		/* success */
 		break;
+	case -EOVERFLOW:
+		if(!dev->overflowwarn) {
+			printk("appletouch: OVERFLOW with data "
+				"length %d, actual length is %d\n",
+				dev->datalen, dev->urb->actual_length);
+			dev->overflowwarn = 1;
+		}
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
@@ -189,23 +218,45 @@ static void atp_complete(struct urb* urb
 	}
 
 	/* drop incomplete datasets */
-	if (dev->urb->actual_length != ATP_DATASIZE) {
+	if (dev->urb->actual_length != dev->datalen) {
 		dprintk("appletouch: incomplete data package.\n");
 		goto exit;
 	}
 
 	/* reorder the sensors values */
-	for (i = 0; i < 8; i++) {
-		/* X values */
-		dev->xy_cur[i     ] = dev->data[5 * i +  2];
-		dev->xy_cur[i +  8] = dev->data[5 * i +  4];
-		dev->xy_cur[i + 16] = dev->data[5 * i + 42];
-		if (i < 2)
-			dev->xy_cur[i + 24] = dev->data[5 * i + 44];
-
-		/* Y values */
-		dev->xy_cur[i + 26] = dev->data[5 * i +  1];
-		dev->xy_cur[i + 34] = dev->data[5 * i +  3];
+	if (atp_is_geyser_2(dev)) {
+		memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
+
+		/*
+		 * The values are laid out like this:
+		 * Y1, Y2, -, Y3, Y4, -, ..., X1, X2, -, X3, X4, -, ...
+		 * '-' is an unused value.
+		 */
+
+		/* read X values */
+		for (i = 0, j = 19; i < 20; i += 2, j += 3) {
+			dev->xy_cur[i] = dev->data[j];
+			dev->xy_cur[i + 1] = dev->data[j + 1];
+		}
+
+		/* read Y values */
+		for (i = 0, j = 1; i < 9; i += 2, j += 3) {
+			dev->xy_cur[ATP_XSENSORS + i] = dev->data[j];
+			dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 1];
+		}
+	} else {
+		for (i = 0; i < 8; i++) {
+			/* X values */
+			dev->xy_cur[i     ] = dev->data[5 * i +  2];
+			dev->xy_cur[i +  8] = dev->data[5 * i +  4];
+			dev->xy_cur[i + 16] = dev->data[5 * i + 42];
+			if (i < 2)
+				dev->xy_cur[i + 24] = dev->data[5 * i + 44];
+
+			/* Y values */
+			dev->xy_cur[i + 26] = dev->data[5 * i +  1];
+			dev->xy_cur[i + 34] = dev->data[5 * i +  3];
+		}
 	}
 
 	dbg_dump("sample", dev->xy_cur);
@@ -216,16 +267,24 @@ static void atp_complete(struct urb* urb
 		dev->x_old = dev->y_old = -1;
 		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
 
-		/* 17" Powerbooks have 10 extra X sensors */
-		for (i = 16; i < ATP_XSENSORS; i++)
-			if (dev->xy_cur[i]) {
-				printk("appletouch: 17\" model detected.\n");
+		/* 17" Powerbooks have extra X sensors */
+		for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) {
+			if (!dev->xy_cur[i]) continue;
+
+			printk("appletouch: 17\" model detected.\n");
+			if(atp_is_geyser_2(dev))
+				input_set_abs_params(dev->input, ABS_X, 0,
+						     (20 - 1) *
+						     ATP_XFACT - 1,
+						     ATP_FUZZ, 0);
+			else
 				input_set_abs_params(dev->input, ABS_X, 0,
 						     (ATP_XSENSORS - 1) *
 						     ATP_XFACT - 1,
 						     ATP_FUZZ, 0);
-				break;
-			}
+
+			break;
+		}
 
 		goto exit;
 	}
@@ -282,7 +341,8 @@ static void atp_complete(struct urb* urb
 		memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
 	}
 
-	input_report_key(dev->input, BTN_LEFT, !!dev->data[80]);
+	input_report_key(dev->input, BTN_LEFT,
+			 !!dev->data[dev->datalen - 1]);
 
 	input_sync(dev->input);
 
@@ -353,6 +413,8 @@ static int atp_probe(struct usb_interfac
 
 	dev->udev = udev;
 	dev->input = input_dev;
+	dev->overflowwarn = 0;
+	dev->datalen = (atp_is_geyser_2(dev)?64:81);
 
 	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->urb) {
@@ -360,7 +422,7 @@ static int atp_probe(struct usb_interfac
 		goto err_free_devs;
 	}
 
-	dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL,
+	dev->data = usb_buffer_alloc(dev->udev, dev->datalen, GFP_KERNEL,
 				     &dev->urb->transfer_dma);
 	if (!dev->data) {
 		retval = -ENOMEM;
@@ -369,7 +431,7 @@ static int atp_probe(struct usb_interfac
 
 	usb_fill_int_urb(dev->urb, udev,
 			 usb_rcvintpipe(udev, int_in_endpointAddr),
-			 dev->data, ATP_DATASIZE, atp_complete, dev, 1);
+			 dev->data, dev->datalen, atp_complete, dev, 1);
 
 	usb_make_path(udev, dev->phys, sizeof(dev->phys));
 	strlcat(dev->phys, "/input0", sizeof(dev->phys));
@@ -385,14 +447,25 @@ static int atp_probe(struct usb_interfac
 
 	set_bit(EV_ABS, input_dev->evbit);
 
-	/*
-	 * 12" and 15" Powerbooks only have 16 x sensors,
-	 * 17" models are detected later.
-	 */
-	input_set_abs_params(input_dev, ABS_X, 0,
-			     (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0,
-			     (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
+	if (atp_is_geyser_2(dev)) {
+		/*
+		 * Oct 2005 15" PowerBooks have 15 X sensors, 17" are detected
+		 * later.
+		 */
+		input_set_abs_params(input_dev, ABS_X, 0,
+				     ((15 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0,
+				     ((9 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0);
+	} else {
+		/*
+		 * 12" and 15" Powerbooks only have 16 x sensors,
+		 * 17" models are detected later.
+		 */
+		input_set_abs_params(input_dev, ABS_X, 0,
+				     (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0,
+				     (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
+	}
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
 
 	set_bit(EV_KEY, input_dev->evbit);
@@ -427,7 +500,7 @@ static void atp_disconnect(struct usb_in
 		usb_kill_urb(dev->urb);
 		input_unregister_device(dev->input);
 		usb_free_urb(dev->urb);
-		usb_buffer_free(dev->udev, ATP_DATASIZE,
+		usb_buffer_free(dev->udev, dev->datalen,
 				dev->data, dev->urb->transfer_dma);
 		kfree(dev);
 	}

[PATCH 07/24] alps: add signature for HP ze1115

[Dmitry Torokhov]

[-- Attachment #1: alps-add-ze1115.patch --]
[-- Type: text/plain, Size: 845 bytes --]

From: Larry Finger <Larry.Finger@lwfinger.net>

Input: ALPS - add signature for HP ze1115

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/mouse/alps.c |    1 +
 1 files changed, 1 insertion(+)

Index: work/drivers/input/mouse/alps.c
===================================================================
--- work.orig/drivers/input/mouse/alps.c
+++ work/drivers/input/mouse/alps.c
@@ -40,6 +40,7 @@ static struct alps_model_info alps_model
 	{ { 0x33, 0x02, 0x0a },	0x88, 0xf8, ALPS_OLDPROTO },		/* UMAX-530T */
 	{ { 0x53, 0x02, 0x0a },	0xf8, 0xf8, 0 },
 	{ { 0x53, 0x02, 0x14 },	0xf8, 0xf8, 0 },
+	{ { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 },			/* HP ze1115 */
 	{ { 0x63, 0x02, 0x0a },	0xf8, 0xf8, 0 },
 	{ { 0x63, 0x02, 0x14 },	0xf8, 0xf8, 0 },
 	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, ALPS_FW_BK_2 },		/* Fujitsu Siemens S6010 */

[PATCH 08/24] psmouse: dont leave mouse asleep

[Dmitry Torokhov]

[-- Attachment #1: psmouse-dont-snooze.patch --]
[-- Type: text/plain, Size: 2154 bytes --]

 
It looks like quite a few mice out there treat PSMOUSE_RESET_DIS
as a powerdown request and turn off the light rendering the mouse
unusable.

Vojtech recommended to switch from PSMOUSE_RESET_DIS to full reset,
however we don't want to do that everywhere as full reset is pretty
slow. Instead we only use it before probing for "generic" protocols,
such as IntelliMouse and Explorer, to make sure that the mouse will
be woken up if it went to sleep as a result of PSMOUSE_RESET_DIS
issued earlier.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/mouse/psmouse-base.c |   15 ++++++---------
 1 files changed, 6 insertions(+), 9 deletions(-)

Index: work/drivers/input/mouse/psmouse-base.c
===================================================================
--- work.orig/drivers/input/mouse/psmouse-base.c
+++ work/drivers/input/mouse/psmouse-base.c
@@ -527,11 +527,15 @@ static int psmouse_extensions(struct psm
 	if (max_proto > PSMOUSE_IMEX && ps2pp_init(psmouse, set_properties) == 0)
 		return PSMOUSE_PS2PP;
 
+	if (max_proto > PSMOUSE_IMEX && trackpoint_detect(psmouse, set_properties) == 0)
+		return PSMOUSE_TRACKPOINT;
+
 /*
  * Reset to defaults in case the device got confused by extended
- * protocol probes.
+ * protocol probes. Note that we do full reset becuase some mice
+ * put themselves to sleep when see PSMOUSE_RESET_DIS.
  */
-	ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
+	psmouse_reset(psmouse);
 
 	if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse, set_properties) == 0)
 		return PSMOUSE_IMEX;
@@ -540,12 +544,6 @@ static int psmouse_extensions(struct psm
 		return PSMOUSE_IMPS;
 
 /*
- * Try to initialize the IBM TrackPoint
- */
-	if (max_proto > PSMOUSE_IMEX && trackpoint_detect(psmouse, set_properties) == 0)
-		return PSMOUSE_TRACKPOINT;
-
-/*
  * Okay, all failed, we have a standard mouse here. The number of the buttons
  * is still a question, though. We assume 3.
  */
@@ -559,7 +557,6 @@ static int psmouse_extensions(struct psm
  * extensions.
  */
 		psmouse_reset(psmouse);
-		ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
 	}
 
 	return PSMOUSE_PS2;

[PATCH 09/24] i8042: disable MUX mode for Sharp MM20

[Dmitry Torokhov]

[-- Attachment #1: i8042-sharp-mm20-nomux.patch --]
[-- Type: text/plain, Size: 785 bytes --]

Input: i8042 - disable MUX mode for Sharp MM20

Add yet another entry to the ever-growing list of boxes with
non-working MUX implementation.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/serio/i8042-x86ia64io.h |    7 +++++++
 1 file changed, 7 insertions(+)

Index: linux/drivers/input/serio/i8042-x86ia64io.h
===================================================================
--- linux.orig/drivers/input/serio/i8042-x86ia64io.h
+++ linux/drivers/input/serio/i8042-x86ia64io.h
@@ -158,6 +158,13 @@ static struct dmi_system_id __initdata i
 			DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
 		},
 	},
+	{
+		.ident = "Sharp Actius MM20",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"),
+		},
+	},
 	{ }
 };
 

[PATCH 10/24] Add help entry for FM801 gameport driver to Kconfig

[Dmitry Torokhov]

[-- Attachment #1: gameport-fm801-help.patch --]
[-- Type: text/plain, Size: 804 bytes --]

Input: add help entry for FM801 gameport driver to Kconfig

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/gameport/Kconfig |    7 +++++++
 1 files changed, 7 insertions(+)

Index: work/drivers/input/gameport/Kconfig
===================================================================
--- work.orig/drivers/input/gameport/Kconfig
+++ work/drivers/input/gameport/Kconfig
@@ -52,5 +52,12 @@ config GAMEPORT_EMU10K1
 config GAMEPORT_FM801
 	tristate "ForteMedia FM801 gameport support"
 	depends on PCI
+	help
+	  Say Y here if you have ForteMedia FM801 PCI audio controller
+	  (Abit AU10, Genius Sound Maker, HP Workstation zx2000,
+	  and others), and want to use its gameport.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fm801-gp.
 
 endif

[PATCH 11/24] lifebook: add DMI signature of Fujitsu Lifebook B142

[Dmitry Torokhov]

[-- Attachment #1: lifebook-add-b142-signature.patch --]
[-- Type: text/plain, Size: 916 bytes --]

From: Daniele Gozzi <daniele.gozzi@gmail.com>

Input: lifebook - add DMI signature of Fujitsu Lifebook B142

This DMI data was found in Fujitsu LifeBook B142 (Product S/N
FPC01003B, italian keyboard); re: bugzilla #5335

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/mouse/lifebook.c |    7 +++++++
 1 files changed, 7 insertions(+)

Index: work/drivers/input/mouse/lifebook.c
===================================================================
--- work.orig/drivers/input/mouse/lifebook.c
+++ work/drivers/input/mouse/lifebook.c
@@ -27,6 +27,13 @@ static struct dmi_system_id lifebook_dmi
                        DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
                },
        },
+       {
+               .ident = "Lifebook B142",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
+               },
+
+       },
        { }
 };
 

[PATCH 12/24] pcspkr: register with driver core as a platfrom device

[Dmitry Torokhov]

[-- Attachment #1: pcspkr-platform-device.patch --]
[-- Type: text/plain, Size: 3494 bytes --]

Input: pcspkr - register with driver core as a platfrom device

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/misc/pcspkr.c |   86 ++++++++++++++++++++++++++++++++++++++++----
 1 files changed, 80 insertions(+), 6 deletions(-)

Index: work/drivers/input/misc/pcspkr.c
===================================================================
--- work.orig/drivers/input/misc/pcspkr.c
+++ work/drivers/input/misc/pcspkr.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/platform_device.h>
 #include <asm/8253pit.h>
 #include <asm/io.h>
 
@@ -23,8 +24,7 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@u
 MODULE_DESCRIPTION("PC Speaker beeper driver");
 MODULE_LICENSE("GPL");
 
-static struct input_dev *pcspkr_dev;
-
+static struct platform_device *pcspkr_platform_device;
 static DEFINE_SPINLOCK(i8253_beep_lock);
 
 static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
@@ -64,8 +64,11 @@ static int pcspkr_event(struct input_dev
 	return 0;
 }
 
-static int __init pcspkr_init(void)
+static int __devinit pcspkr_probe(struct platform_device *dev)
 {
+	struct input_dev *pcspkr_dev;
+	int err;
+
 	pcspkr_dev = input_allocate_device();
 	if (!pcspkr_dev)
 		return -ENOMEM;
@@ -76,21 +79,92 @@ static int __init pcspkr_init(void)
 	pcspkr_dev->id.vendor = 0x001f;
 	pcspkr_dev->id.product = 0x0001;
 	pcspkr_dev->id.version = 0x0100;
+	pcspkr_dev->cdev.dev = &dev->dev;
 
 	pcspkr_dev->evbit[0] = BIT(EV_SND);
 	pcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
 	pcspkr_dev->event = pcspkr_event;
 
-	input_register_device(pcspkr_dev);
+	err = input_register_device(pcspkr_dev);
+	if (err) {
+		input_free_device(pcspkr_dev);
+		return err;
+	}
+
+	platform_set_drvdata(dev, pcspkr_dev);
 
 	return 0;
 }
 
-static void __exit pcspkr_exit(void)
+static int __devexit pcspkr_remove(struct platform_device *dev)
 {
-        input_unregister_device(pcspkr_dev);
+	struct input_dev *pcspkr_dev = platform_get_drvdata(dev);
+
+	input_unregister_device(pcspkr_dev);
+	platform_set_drvdata(dev, NULL);
 	/* turn off the speaker */
 	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
+
+	return 0;
+}
+
+static int pcspkr_suspend(struct platform_device *dev, pm_message_t state)
+{
+	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
+
+	return 0;
+}
+
+static void pcspkr_shutdown(struct platform_device *dev)
+{
+	/* turn off the speaker */
+	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
+}
+
+static struct platform_driver pcspkr_platform_driver = {
+	.driver		= {
+		.name	= "pcspkr",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pcspkr_probe,
+	.remove		= __devexit_p(pcspkr_remove),
+	.suspend	= pcspkr_suspend,
+	.shutdown	= pcspkr_shutdown,
+};
+
+
+static int __init pcspkr_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&pcspkr_platform_driver);
+	if (err)
+		return err;
+
+	pcspkr_platform_device = platform_device_alloc("pcspkr", -1);
+	if (!pcspkr_platform_device) {
+		err = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	err = platform_device_add(pcspkr_platform_device);
+	if (err)
+		goto err_free_device;
+
+	return 0;
+
+ err_free_device:
+	platform_device_put(pcspkr_platform_device);
+ err_unregister_driver:
+	platform_driver_unregister(&pcspkr_platform_driver);
+
+	return err;
+}
+
+static void __exit pcspkr_exit(void)
+{
+	platform_device_unregister(pcspkr_platform_device);
+	platform_driver_unregister(&pcspkr_platform_driver);
 }
 
 module_init(pcspkr_init);

[PATCH 13/24] m68kspkr: register with driver core as a platfrom device

[Dmitry Torokhov]

[-- Attachment #1: m68kspkr-platform-device.patch --]
[-- Type: text/plain, Size: 3897 bytes --]

Input: m68kspkr - register with driver core as a platfrom device

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/misc/m68kspkr.c |  104 ++++++++++++++++++++++++++++++++++--------
 1 files changed, 86 insertions(+), 18 deletions(-)

Index: work/drivers/input/misc/m68kspkr.c
===================================================================
--- work.orig/drivers/input/misc/m68kspkr.c
+++ work/drivers/input/misc/m68kspkr.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/platform_device.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
 
@@ -24,7 +25,7 @@ MODULE_AUTHOR("Richard Zidlicky <rz@linu
 MODULE_DESCRIPTION("m68k beeper driver");
 MODULE_LICENSE("GPL");
 
-static struct input_dev *m68kspkr_dev;
+static struct platform_device *m68kspkr_platform_device;
 
 static int m68kspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
@@ -47,36 +48,103 @@ static int m68kspkr_event(struct input_d
 	return 0;
 }
 
+static int __devinit m68kspkr_probe(struct platform_device *dev)
+{
+	struct input_dev *input_dev;
+	int err;
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		return -ENOMEM;
+
+	input_dev->name = "m68k beeper";
+	input_dev->phys = "m68k/generic";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor  = 0x001f;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->cdev.dev = &dev->dev;
+
+	input_dev->evbit[0] = BIT(EV_SND);
+	input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+	input_dev->event = m68kspkr_event;
+
+	err = input_register_device(input_dev);
+	if (err) {
+		input_free_device(input_dev);
+		return err;
+	}
+
+	platform_set_drvdata(dev, input_dev);
+
+	return 0;
+}
+
+static int __devexit m68kspkr_remove(struct platform_device *dev)
+{
+	struct input_dev *input_dev = platform_get_drvdata(dev);
+
+	input_unregister_device(input_dev);
+	platform_set_drvdata(dev, NULL);
+	/* turn off the speaker */
+	m68kspkr_event(NULL, EV_SND, SND_BELL, 0);
+
+	return 0;
+}
+
+static void m68kspkr_shutdown(struct platform_device *dev)
+{
+	/* turn off the speaker */
+	m68kspkr_event(NULL, EV_SND, SND_BELL, 0);
+}
+
+static struct platform_driver m68kspkr_platform_driver = {
+	.driver		= {
+		.name	= "m68kspkr",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= m68kspkr_probe,
+	.remove		= __devexit_p(m68kspkr_remove),
+	.shutdown	= m68kspkr_shutdown,
+};
+
 static int __init m68kspkr_init(void)
 {
-        if (!mach_beep) {
+	int err;
+
+	if (!mach_beep) {
 		printk(KERN_INFO "m68kspkr: no lowlevel beep support\n");
 		return -ENODEV;
         }
 
-	m68kspkr_dev = input_allocate_device();
-	if (!m68kspkr_dev)
-		return -ENOMEM;
-
-	m68kspkr_dev->name = "m68k beeper";
-	m68kspkr_dev->phys = "m68k/generic";
-	m68kspkr_dev->id.bustype = BUS_HOST;
-	m68kspkr_dev->id.vendor = 0x001f;
-	m68kspkr_dev->id.product = 0x0001;
-	m68kspkr_dev->id.version = 0x0100;
-
-	m68kspkr_dev->evbit[0] = BIT(EV_SND);
-	m68kspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
-	m68kspkr_dev->event = m68kspkr_event;
+	err = platform_driver_register(&m68kspkr_platform_driver);
+	if (err)
+		return err;
+
+	m68kspkr_platform_device = platform_device_alloc("m68kspkr", -1);
+	if (!m68kspkr_platform_device) {
+		err = -ENOMEM;
+		goto err_unregister_driver;
+	}
 
-	input_register_device(m68kspkr_dev);
+	err = platform_device_add(m68kspkr_platform_device);
+	if (err)
+		goto err_free_device;
 
 	return 0;
+
+ err_free_device:
+	platform_device_put(m68kspkr_platform_device);
+ err_unregister_driver:
+	platform_driver_unregister(&m68kspkr_platform_driver);
+
+	return err;
 }
 
 static void __exit m68kspkr_exit(void)
 {
-        input_unregister_device(m68kspkr_dev);
+	platform_device_unregister(m68kspkr_platform_device);
+	platform_driver_unregister(&m68kspkr_platform_driver);
 }
 
 module_init(m68kspkr_init);

[PATCH 14/24] sparcspkr: register with driver core as a platfrom device

[Dmitry Torokhov]

[-- Attachment #1: sparcspkr-platform-device.patch --]
[-- Type: text/plain, Size: 6402 bytes --]

Input: sparcspkr - register with driver core as a platfrom device

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/misc/sparcspkr.c |  162 ++++++++++++++++++++++++++---------------
 1 files changed, 105 insertions(+), 57 deletions(-)

Index: work/drivers/input/misc/sparcspkr.c
===================================================================
--- work.orig/drivers/input/misc/sparcspkr.c
+++ work/drivers/input/misc/sparcspkr.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/ebus.h>
@@ -20,22 +21,10 @@ MODULE_AUTHOR("David S. Miller <davem@re
 MODULE_DESCRIPTION("Sparc Speaker beeper driver");
 MODULE_LICENSE("GPL");
 
+const char *beep_name;
 static unsigned long beep_iobase;
-static struct input_dev *sparcspkr_dev;
-
-DEFINE_SPINLOCK(beep_lock);
-
-static void __init init_sparcspkr_struct(void)
-{
-	sparcspkr_dev->evbit[0] = BIT(EV_SND);
-	sparcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
-
-	sparcspkr_dev->phys = "sparc/input0";
-	sparcspkr_dev->id.bustype = BUS_ISA;
-	sparcspkr_dev->id.vendor = 0x001f;
-	sparcspkr_dev->id.product = 0x0001;
-	sparcspkr_dev->id.version = 0x0100;
-}
+static int (*beep_event)(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+static DEFINE_SPINLOCK(beep_lock);
 
 static int ebus_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
@@ -59,39 +48,16 @@ static int ebus_spkr_event(struct input_
 	/* EBUS speaker only has on/off state, the frequency does not
 	 * appear to be programmable.
 	 */
-	if (count) {
-		if (beep_iobase & 0x2UL)
-			outb(1, beep_iobase);
-		else
-			outl(1, beep_iobase);
-	} else {
-		if (beep_iobase & 0x2UL)
-			outb(0, beep_iobase);
-		else
-			outl(0, beep_iobase);
-	}
+	if (beep_iobase & 0x2UL)
+		outb(!!count, beep_iobase);
+	else
+		outl(!!count, beep_iobase);
 
 	spin_unlock_irqrestore(&beep_lock, flags);
 
 	return 0;
 }
 
-static int __init init_ebus_beep(struct linux_ebus_device *edev)
-{
-	beep_iobase = edev->resource[0].start;
-
-	sparcspkr_dev = input_allocate_device();
-	if (!sparcspkr_dev)
-		return -ENOMEM;
-
-	sparcspkr_dev->name = "Sparc EBUS Speaker";
-	sparcspkr_dev->event = ebus_spkr_event;
-
-	input_register_device(sparcspkr_dev);
-
-	return 0;
-}
-
 #ifdef CONFIG_SPARC64
 static int isa_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
@@ -129,30 +95,103 @@ static int isa_spkr_event(struct input_d
 
 	return 0;
 }
+#endif
 
-static int __init init_isa_beep(struct sparc_isa_device *isa_dev)
+static int __devinit sparcspkr_probe(struct platform_device *dev)
 {
-	beep_iobase = isa_dev->resource.start;
+	struct input_dev *input_dev;
+	int error;
 
-	sparcspkr_dev = input_allocate_device();
-	if (!sparcspkr_dev)
+	input_dev = input_allocate_device();
+	if (!input_dev)
 		return -ENOMEM;
 
-	init_sparcspkr_struct();
+	input_dev->name = beep_name;
+	input_dev->phys = "sparc/input0";
+	input_dev->id.bustype = BUS_ISA;
+	input_dev->id.vendor = 0x001f;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->cdev.dev = &dev->dev;
+
+	input_dev->evbit[0] = BIT(EV_SND);
+	input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+
+	input_dev->event = beep_event;
+
+	error = input_register_device(input_dev);
+	if (error) {
+		input_free_device(input_dev);
+		return error;
+	}
 
-	sparcspkr_dev->name = "Sparc ISA Speaker";
-	sparcspkr_dev->event = isa_spkr_event;
+	platform_set_drvdata(dev, input_dev);
 
-	input_register_device(sparcspkr_dev);
+	return 0;
+}
+
+static int __devexit sparcspkr_remove(struct platform_device *dev)
+{
+	struct input_dev *input_dev = platform_get_drvdata(dev);
+
+	input_unregister_device(input_dev);
+	platform_set_drvdata(dev, NULL);
+	/* turn off the speaker */
+	beep_event(NULL, EV_SND, SND_BELL, 0);
 
 	return 0;
 }
-#endif
+
+static void sparcspkr_shutdown(struct platform_device *dev)
+{
+	/* turn off the speaker */
+	beep_event(NULL, EV_SND, SND_BELL, 0);
+}
+
+static struct platform_driver sparcspkr_platform_driver = {
+	.driver		= {
+		.name	= "sparcspkr",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= sparcspkr_probe,
+	.remove		= __devexit_p(sparcspkr_remove),
+	.shutdown	= sparcspkr_shutdown,
+};
+
+static struct platform_device *sparcspkr_platform_device;
+
+static int __init sparcspkr_drv_init(void)
+{
+	int error;
+
+	error = platform_driver_register(&sparcspkr_platform_driver);
+	if (error)
+		return error;
+
+	sparcspkr_platform_device = platform_device_alloc("sparcspkr", -1);
+	if (!sparcspkr_platform_device) {
+		error = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	error = platform_device_add(sparcspkr_platform_device);
+	if (error)
+		goto err_free_device;
+
+	return 0;
+
+ err_free_device:
+	platform_device_put(sparcspkr_platform_device);
+ err_unregister_driver:
+	platform_driver_unregister(&sparcspkr_platform_driver);
+
+	return error;
+}
 
 static int __init sparcspkr_init(void)
 {
 	struct linux_ebus *ebus;
-	struct linux_ebus_device *edev = NULL;
+	struct linux_ebus_device *edev;
 #ifdef CONFIG_SPARC64
 	struct sparc_isa_bridge *isa_br;
 	struct sparc_isa_device *isa_dev;
@@ -160,8 +199,12 @@ static int __init sparcspkr_init(void)
 
 	for_each_ebus(ebus) {
 		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_name, "beep"))
-				return init_ebus_beep(edev);
+			if (!strcmp(edev->prom_name, "beep")) {
+				beep_name = "Sparc EBUS Speaker";
+				beep_event = ebus_spkr_event;
+				beep_iobase = edev->resource[0].start;
+				return sparcspkr_drv_init();
+			}
 		}
 	}
 #ifdef CONFIG_SPARC64
@@ -170,8 +213,12 @@ static int __init sparcspkr_init(void)
 			/* A hack, the beep device's base lives in
 			 * the DMA isa node.
 			 */
-			if (!strcmp(isa_dev->prom_name, "dma"))
-				return init_isa_beep(isa_dev);
+			if (!strcmp(isa_dev->prom_name, "dma")) {
+				beep_name = "Sparc ISA Speaker";
+				beep_event = isa_spkr_event,
+				beep_iobase = isa_dev->resource.start;
+				return sparcspkr_drv_init();
+			}
 		}
 	}
 #endif
@@ -181,7 +228,8 @@ static int __init sparcspkr_init(void)
 
 static void __exit sparcspkr_exit(void)
 {
-	input_unregister_device(sparcspkr_dev);
+	platform_device_unregister(sparcspkr_platform_device);
+	platform_driver_unregister(&sparcspkr_platform_driver);
 }
 
 module_init(sparcspkr_init);

[PATCH 15/24] logips2pp: add signature of MouseMan Wheel Mouse (87)

[Dmitry Torokhov]

[-- Attachment #1: logips2pp-add-signature-87.patch --]
[-- Type: text/plain, Size: 736 bytes --]

Input: logips2pp - add signature of MouseMan Wheel Mouse (87)

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/mouse/logips2pp.c |    1 +
 1 files changed, 1 insertion(+)

Index: work/drivers/input/mouse/logips2pp.c
===================================================================
--- work.orig/drivers/input/mouse/logips2pp.c
+++ work/drivers/input/mouse/logips2pp.c
@@ -228,6 +228,7 @@ static struct ps2pp_info *get_model_info
 		{ 83,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 85,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 86,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
+		{ 87,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 88,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 96,	0,			0 },
 		{ 97,	PS2PP_KIND_TP3,		PS2PP_WHEEL | PS2PP_HWHEEL },

[PATCH 16/24] i8042: convert to the new platform device interface

[Dmitry Torokhov]

[-- Attachment #1: i8042-convert-platform-intf.patch --]
[-- Type: text/plain, Size: 5474 bytes --]

Input: i8042 - convert to the new platform device interface

Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

Index: work/drivers/input/serio/i8042.c
===================================================================
--- work.orig/drivers/input/serio/i8042.c
+++ work/drivers/input/serio/i8042.c
@@ -572,7 +572,7 @@ static int i8042_enable_mux_ports(void)
  * LCS/Telegraphics.
  */
 
-static int __init i8042_check_mux(void)
+static int __devinit i8042_check_mux(void)
 {
 	unsigned char mux_version;
 
@@ -600,7 +600,7 @@ static int __init i8042_check_mux(void)
  * the presence of an AUX interface.
  */
 
-static int __init i8042_check_aux(void)
+static int __devinit i8042_check_aux(void)
 {
 	unsigned char param;
 	static int i8042_check_aux_cookie;
@@ -678,7 +678,7 @@ static int __init i8042_check_aux(void)
  * registers it, and reports to the user.
  */
 
-static int __init i8042_port_register(struct i8042_port *port)
+static int __devinit i8042_port_register(struct i8042_port *port)
 {
 	i8042_ctr &= ~port->disable;
 
@@ -956,7 +956,6 @@ static int i8042_resume(struct platform_
 	panic_blink = i8042_panic_blink;
 
 	return 0;
-
 }
 
 /*
@@ -969,16 +968,7 @@ static void i8042_shutdown(struct platfo
 	i8042_controller_cleanup();
 }
 
-static struct platform_driver i8042_driver = {
-	.suspend	= i8042_suspend,
-	.resume		= i8042_resume,
-	.shutdown	= i8042_shutdown,
-	.driver		= {
-		.name	= "i8042",
-	},
-};
-
-static int __init i8042_create_kbd_port(void)
+static int __devinit i8042_create_kbd_port(void)
 {
 	struct serio *serio;
 	struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO];
@@ -1003,7 +993,7 @@ static int __init i8042_create_kbd_port(
 	return i8042_port_register(port);
 }
 
-static int __init i8042_create_aux_port(void)
+static int __devinit i8042_create_aux_port(void)
 {
 	struct serio *serio;
 	struct i8042_port *port = &i8042_ports[I8042_AUX_PORT_NO];
@@ -1028,7 +1018,7 @@ static int __init i8042_create_aux_port(
 	return i8042_port_register(port);
 }
 
-static int __init i8042_create_mux_port(int index)
+static int __devinit i8042_create_mux_port(int index)
 {
 	struct serio *serio;
 	struct i8042_port *port = &i8042_ports[I8042_MUX_PORT_NO + index];
@@ -1057,37 +1047,16 @@ static int __init i8042_create_mux_port(
 	return i8042_port_register(port);
 }
 
-static int __init i8042_init(void)
+static int __devinit i8042_probe(struct platform_device *dev)
 {
 	int i, have_ports = 0;
 	int err;
 
-	dbg_init();
-
 	init_timer(&i8042_timer);
 	i8042_timer.function = i8042_timer_func;
 
-	err = i8042_platform_init();
-	if (err)
-		return err;
-
-	i8042_ports[I8042_AUX_PORT_NO].irq = I8042_AUX_IRQ;
-	i8042_ports[I8042_KBD_PORT_NO].irq = I8042_KBD_IRQ;
-
-	if (i8042_controller_init()) {
-		err = -ENODEV;
-		goto err_platform_exit;
-	}
-
-	err = platform_driver_register(&i8042_driver);
-	if (err)
-		goto err_controller_cleanup;
-
-	i8042_platform_device = platform_device_register_simple("i8042", -1, NULL, 0);
-	if (IS_ERR(i8042_platform_device)) {
-		err = PTR_ERR(i8042_platform_device);
-		goto err_unregister_driver;
-	}
+	if (i8042_controller_init())
+		return -ENODEV;
 
 	if (!i8042_noaux && !i8042_check_aux()) {
 		if (!i8042_nomux && !i8042_check_mux()) {
@@ -1113,30 +1082,23 @@ static int __init i8042_init(void)
 
 	if (!have_ports) {
 		err = -ENODEV;
-		goto err_unregister_device;
+		goto err_controller_cleanup;
 	}
 
 	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
-
 	return 0;
 
  err_unregister_ports:
 	for (i = 0; i < I8042_NUM_PORTS; i++)
 		if (i8042_ports[i].serio)
 			serio_unregister_port(i8042_ports[i].serio);
- err_unregister_device:
-	platform_device_unregister(i8042_platform_device);
- err_unregister_driver:
-	platform_driver_unregister(&i8042_driver);
  err_controller_cleanup:
 	i8042_controller_cleanup();
- err_platform_exit:
-	i8042_platform_exit();
 
 	return err;
 }
 
-static void __exit i8042_exit(void)
+static int __devexit i8042_remove(struct platform_device *dev)
 {
 	int i;
 
@@ -1148,6 +1110,62 @@ static void __exit i8042_exit(void)
 
 	del_timer_sync(&i8042_timer);
 
+	return 0;
+}
+
+static struct platform_driver i8042_driver = {
+	.driver		= {
+		.name	= "i8042",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= i8042_probe,
+	.remove		= __devexit_p(i8042_remove),
+	.suspend	= i8042_suspend,
+	.resume		= i8042_resume,
+	.shutdown	= i8042_shutdown,
+};
+
+static int __init i8042_init(void)
+{
+	int err;
+
+	dbg_init();
+
+	err = i8042_platform_init();
+	if (err)
+		return err;
+
+	i8042_ports[I8042_AUX_PORT_NO].irq = I8042_AUX_IRQ;
+	i8042_ports[I8042_KBD_PORT_NO].irq = I8042_KBD_IRQ;
+
+	err = platform_driver_register(&i8042_driver);
+	if (err)
+		goto err_platform_exit;
+
+	i8042_platform_device = platform_device_alloc("i8042", -1);
+	if (!i8042_platform_device) {
+		err = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	err = platform_device_add(i8042_platform_device);
+	if (err)
+		goto err_free_device;
+
+	return 0;
+
+ err_free_device:
+	platform_device_put(i8042_platform_device);
+ err_unregister_driver:
+	platform_driver_unregister(&i8042_driver);
+ err_platform_exit:
+	i8042_platform_exit();
+
+	return err;
+}
+
+static void __exit i8042_exit(void)
+{
 	platform_device_unregister(i8042_platform_device);
 	platform_driver_unregister(&i8042_driver);
 

[PATCH 17/24] ct82c710: convert to the new platform device interface

[Dmitry Torokhov]

[-- Attachment #1: ct82c710-convert-platform-intf.patch --]
[-- Type: text/plain, Size: 4354 bytes --]

Input: ct82c710 - convert to the new platform device interface

Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.


Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/serio/ct82c710.c |   89 +++++++++++++++++++++++++++++------------
 1 files changed, 63 insertions(+), 26 deletions(-)

Index: work/drivers/input/serio/ct82c710.c
===================================================================
--- work.orig/drivers/input/serio/ct82c710.c
+++ work/drivers/input/serio/ct82c710.c
@@ -154,7 +154,7 @@ static int ct82c710_write(struct serio *
  * See if we can find a 82C710 device. Read mouse address.
  */
 
-static int __init ct82c710_probe(void)
+static int __init ct82c710_detect(void)
 {
 	outb_p(0x55, 0x2fa);				/* Any value except 9, ff or 36 */
 	outb_p(0xaa, 0x3fa);				/* Inverse of 55 */
@@ -163,7 +163,7 @@ static int __init ct82c710_probe(void)
 	outb_p(0x1b, 0x2fa);				/* Inverse of e4 */
 	outb_p(0x0f, 0x390);				/* Write index */
 	if (inb_p(0x391) != 0xe4)			/* Config address found? */
-		return -1;				/* No: no 82C710 here */
+		return -ENODEV;				/* No: no 82C710 here */
 
 	outb_p(0x0d, 0x390);				/* Write index */
 	ct82c710_iores.start = inb_p(0x391) << 2;	/* Get mouse I/O address */
@@ -175,51 +175,88 @@ static int __init ct82c710_probe(void)
 	return 0;
 }
 
-static struct serio * __init ct82c710_allocate_port(void)
+static int __devinit ct82c710_probe(struct platform_device *dev)
 {
-	struct serio *serio;
+	ct82c710_port = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!ct82c710_port)
+		return -ENOMEM;
 
-	serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
-	if (serio) {
-		memset(serio, 0, sizeof(struct serio));
-		serio->id.type = SERIO_8042;
-		serio->open = ct82c710_open;
-		serio->close = ct82c710_close;
-		serio->write = ct82c710_write;
-		serio->dev.parent = &ct82c710_device->dev;
-		strlcpy(serio->name, "C&T 82c710 mouse port", sizeof(serio->name));
-		snprintf(serio->phys, sizeof(serio->phys), "isa%04lx/serio0", CT82C710_DATA);
-	}
+	ct82c710_port->id.type = SERIO_8042;
+	ct82c710_port->dev.parent = &dev->dev;
+	ct82c710_port->open = ct82c710_open;
+	ct82c710_port->close = ct82c710_close;
+	ct82c710_port->write = ct82c710_write;
+	strlcpy(ct82c710_port->name, "C&T 82c710 mouse port",
+		sizeof(ct82c710_port->name));
+	snprintf(ct82c710_port->phys, sizeof(ct82c710_port->phys),
+		 "isa%04lx/serio0", CT82C710_DATA);
 
-	return serio;
+	serio_register_port(ct82c710_port);
+
+	return 0;
 }
 
-static int __init ct82c710_init(void)
+static int __devexit ct82c710_remove(struct platform_device *dev)
 {
-	if (ct82c710_probe())
-		return -ENODEV;
+	serio_unregister_port(ct82c710_port);
+
+	return 0;
+}
 
-	ct82c710_device = platform_device_register_simple("ct82c710", -1, &ct82c710_iores, 1);
-	if (IS_ERR(ct82c710_device))
-		return PTR_ERR(ct82c710_device);
+static struct platform_driver ct82c710_driver = {
+	.driver		= {
+		.name	= "ct82c710",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ct82c710_probe,
+	.remove		= __devexit_p(ct82c710_remove),
+};
 
-	if (!(ct82c710_port = ct82c710_allocate_port())) {
-		platform_device_unregister(ct82c710_device);
-		return -ENOMEM;
+
+static int __init ct82c710_init(void)
+{
+	int error;
+
+	error = ct82c710_detect();
+	if (error)
+		return error;
+
+	error = platform_driver_register(&ct82c710_driver);
+	if (error)
+		return error;
+
+	ct82c710_device = platform_device_alloc("ct82c710", -1);
+	if (!ct82c710_device) {
+		error = -ENOMEM;
+		goto err_unregister_driver;
 	}
 
+	error = platform_device_add_resources(ct82c710_device, &ct82c710_iores, 1);
+	if (error)
+		goto err_free_device;
+
+	error = platform_device_add(ct82c710_device);
+	if (error)
+		goto err_free_device;
+
 	serio_register_port(ct82c710_port);
 
 	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#lx irq %d\n",
 		CT82C710_DATA, CT82C710_IRQ);
 
 	return 0;
+
+ err_free_device:
+	platform_device_put(ct82c710_device);
+ err_unregister_driver:
+	platform_driver_unregister(&ct82c710_driver);
+	return error;
 }
 
 static void __exit ct82c710_exit(void)
 {
-	serio_unregister_port(ct82c710_port);
 	platform_device_unregister(ct82c710_device);
+	platform_driver_unregister(&ct82c710_driver);
 }
 
 module_init(ct82c710_init);

[PATCH 18/24] maceps2: convert to the new platform device interface

[Dmitry Torokhov]

[-- Attachment #1: maceps2-convert-platform-intf.patch --]
[-- Type: text/plain, Size: 3227 bytes --]

Input: maceps2 - convert to the new platform device interface

Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.


Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/serio/maceps2.c |   68 ++++++++++++++++++++++++++++++++----------
 1 files changed, 52 insertions(+), 16 deletions(-)

Index: work/drivers/input/serio/maceps2.c
===================================================================
--- work.orig/drivers/input/serio/maceps2.c
+++ work/drivers/input/serio/maceps2.c
@@ -118,13 +118,12 @@ static void maceps2_close(struct serio *
 }
 
 
-static struct serio * __init maceps2_allocate_port(int idx)
+static struct serio * __devinit maceps2_allocate_port(int idx)
 {
 	struct serio *serio;
 
-	serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
 	if (serio) {
-		memset(serio, 0, sizeof(struct serio));
 		serio->id.type		= SERIO_8042;
 		serio->write		= maceps2_write;
 		serio->open		= maceps2_open;
@@ -138,24 +137,13 @@ static struct serio * __init maceps2_all
 	return serio;
 }
 
-
-static int __init maceps2_init(void)
+static int __devinit maceps2_probe(struct platform_device *dev)
 {
-	maceps2_device = platform_device_register_simple("maceps2", -1, NULL, 0);
-	if (IS_ERR(maceps2_device))
-		return PTR_ERR(maceps2_device);
-
-	port_data[0].port = &mace->perif.ps2.keyb;
-	port_data[0].irq  = MACEISA_KEYB_IRQ;
-	port_data[1].port = &mace->perif.ps2.mouse;
-	port_data[1].irq  = MACEISA_MOUSE_IRQ;
-
 	maceps2_port[0] = maceps2_allocate_port(0);
 	maceps2_port[1] = maceps2_allocate_port(1);
 	if (!maceps2_port[0] || !maceps2_port[1]) {
 		kfree(maceps2_port[0]);
 		kfree(maceps2_port[1]);
-		platform_device_unregister(maceps2_device);
 		return -ENOMEM;
 	}
 
@@ -165,11 +153,59 @@ static int __init maceps2_init(void)
 	return 0;
 }
 
-static void __exit maceps2_exit(void)
+static int __devexit maceps2_remove(struct platform_device *dev)
 {
 	serio_unregister_port(maceps2_port[0]);
 	serio_unregister_port(maceps2_port[1]);
+
+	return 0;
+}
+
+static struct platform_driver maceps2_driver = {
+	.driver		= {
+		.name	= "maceps2",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= maceps2_probe,
+	.remove		= __devexit_p(maceps2_remove),
+};
+
+static int __init maceps2_init(void)
+{
+	int error;
+
+	error = platform_driver_register(&maceps2_driver);
+	if (error)
+		return error;
+
+	maceps2_device = platform_device_alloc("maceps2", -1);
+	if (!maceps2_device) {
+		error = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	port_data[0].port = &mace->perif.ps2.keyb;
+	port_data[0].irq  = MACEISA_KEYB_IRQ;
+	port_data[1].port = &mace->perif.ps2.mouse;
+	port_data[1].irq  = MACEISA_MOUSE_IRQ;
+
+	error = platform_device_add(maceps2_device);
+	if (error)
+		goto err_free_device;
+
+	return 0;
+
+ err_free_device:
+	platform_device_put(maceps2_device);
+ err_unregister_driver:
+	platform_driver_unregister(&maceps2_driver);
+	return error;
+}
+
+static void __exit maceps2_exit(void)
+{
 	platform_device_unregister(maceps2_device);
+	platform_driver_unregister(&maceps2_driver);
 }
 
 module_init(maceps2_init);

[PATCH 19/24] q40kbd: convert to the new platform device interface

[Dmitry Torokhov]

[-- Attachment #1: q40kbd-convert-platform-intf.patch --]
[-- Type: text/plain, Size: 4103 bytes --]

Input: q40kbd - convert to the new platform device interface

Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/serio/q40kbd.c |   91 +++++++++++++++++++++++++++----------------
 1 files changed, 58 insertions(+), 33 deletions(-)

Index: work/drivers/input/serio/q40kbd.c
===================================================================
--- work.orig/drivers/input/serio/q40kbd.c
+++ work/drivers/input/serio/q40kbd.c
@@ -75,13 +75,13 @@ static irqreturn_t q40kbd_interrupt(int 
 
 static void q40kbd_flush(void)
 {
- 	int maxread = 100;
+	int maxread = 100;
 	unsigned long flags;
 
 	spin_lock_irqsave(&q40kbd_lock, flags);
 
- 	while (maxread-- && (Q40_IRQ_KEYB_MASK & master_inb(INTERRUPT_REG)))
- 		master_inb(KEYCODE_REG);
+	while (maxread-- && (Q40_IRQ_KEYB_MASK & master_inb(INTERRUPT_REG)))
+		master_inb(KEYCODE_REG);
 
 	spin_unlock_irqrestore(&q40kbd_lock, flags);
 }
@@ -97,14 +97,14 @@ static int q40kbd_open(struct serio *por
 
 	if (request_irq(Q40_IRQ_KEYBOARD, q40kbd_interrupt, 0, "q40kbd", NULL)) {
 		printk(KERN_ERR "q40kbd.c: Can't get irq %d.\n", Q40_IRQ_KEYBOARD);
-		return -1;
+		return -EBUSY;
 	}
 
- 	/* off we go */
- 	master_outb(-1, KEYBOARD_UNLOCK_REG);
- 	master_outb(1, KEY_IRQ_ENABLE_REG);
+	/* off we go */
+	master_outb(-1, KEYBOARD_UNLOCK_REG);
+	master_outb(1, KEY_IRQ_ENABLE_REG);
 
- 	return 0;
+	return 0;
 }
 
 static void q40kbd_close(struct serio *port)
@@ -116,48 +116,73 @@ static void q40kbd_close(struct serio *p
 	q40kbd_flush();
 }
 
-static struct serio * __init q40kbd_allocate_port(void)
+static int __devinit q40kbd_probe(struct platform_device *dev)
 {
-	struct serio *serio;
+	q40kbd_port = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!q40kbd_port)
+		return -ENOMEM;
 
-	serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
-	if (serio) {
-		memset(serio, 0, sizeof(struct serio));
-		serio->id.type		= SERIO_8042;
-		serio->open		= q40kbd_open;
-		serio->close		= q40kbd_close;
-		serio->dev.parent	= &q40kbd_device->dev;
-		strlcpy(serio->name, "Q40 Kbd Port", sizeof(serio->name));
-		strlcpy(serio->phys, "Q40", sizeof(serio->phys));
-	}
+	q40kbd_port->id.type	= SERIO_8042;
+	q40kbd_port->open	= q40kbd_open;
+	q40kbd_port->close	= q40kbd_close;
+	q40kbd_port->dev.parent	= &dev->dev;
+	strlcpy(q40kbd_port->name, "Q40 Kbd Port", sizeof(q40kbd_port->name));
+	strlcpy(q40kbd_port->phys, "Q40", sizeof(q40kbd_port->phys));
+
+	serio_register_port(q40kbd_port);
+	printk(KERN_INFO "serio: Q40 kbd registered\n");
+
+	return 0;
+}
+
+static int __devexit q40kbd_remove(struct platform_device *dev)
+{
+	serio_unregister_port(q40kbd_port);
 
-	return serio;
+	return 0;
 }
 
+static struct platform_driver q40kbd_driver = {
+	.driver		= {
+		.name	= "q40kbd",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= q40kbd_probe,
+	.remove		= __devexit_p(q40kbd_remove),
+};
+
 static int __init q40kbd_init(void)
 {
+	int error;
+
 	if (!MACH_IS_Q40)
 		return -EIO;
 
-	q40kbd_device = platform_device_register_simple("q40kbd", -1, NULL, 0);
-	if (IS_ERR(q40kbd_device))
-		return PTR_ERR(q40kbd_device);
-
-	if (!(q40kbd_port = q40kbd_allocate_port())) {
-		platform_device_unregister(q40kbd_device);
-		return -ENOMEM;
-	}
-
-	serio_register_port(q40kbd_port);
-	printk(KERN_INFO "serio: Q40 kbd registered\n");
+	error = platform_driver_register(&q40kbd_driver);
+	if (error)
+		return error;
+
+	q40kbd_device = platform_device_alloc("q40kbd", -1);
+	if (!q40kbd_device)
+		goto err_unregister_driver;
+
+	error = platform_device_add(q40kbd_device);
+	if (error)
+		goto err_free_device;
 
 	return 0;
+
+ err_free_device:
+	platform_device_put(q40kbd_device);
+ err_unregister_driver:
+	platform_driver_unregister(&q40kbd_driver);
+	return error;
 }
 
 static void __exit q40kbd_exit(void)
 {
-	serio_unregister_port(q40kbd_port);
 	platform_device_unregister(q40kbd_device);
+	platform_driver_unregister(&q40kbd_driver);
 }
 
 module_init(q40kbd_init);

[PATCH 20/24] Wistron: switch to the new platform device interface

[Dmitry Torokhov]

[-- Attachment #1: wistron-new-platform-code.patch --]
[-- Type: text/plain, Size: 4922 bytes --]

Input: wistron - convert to the new platform device interface

Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding would work.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/misc/wistron_btns.c |  114 ++++++++++++++++++++++----------------
 1 files changed, 68 insertions(+), 46 deletions(-)

Index: work/drivers/input/misc/wistron_btns.c
===================================================================
--- work.orig/drivers/input/misc/wistron_btns.c
+++ work/drivers/input/misc/wistron_btns.c
@@ -174,7 +174,7 @@ static u16 bios_pop_queue(void)
 	return regs.eax;
 }
 
-static void __init bios_attach(void)
+static void __devinit bios_attach(void)
 {
 	struct regs regs;
 
@@ -194,7 +194,7 @@ static void bios_detach(void)
 	call_bios(&regs);
 }
 
-static u8 __init bios_get_cmos_address(void)
+static u8 __devinit bios_get_cmos_address(void)
 {
 	struct regs regs;
 
@@ -206,7 +206,7 @@ static u8 __init bios_get_cmos_address(v
 	return regs.ecx;
 }
 
-static u16 __init bios_get_default_setting(u8 subsys)
+static u16 __devinit bios_get_default_setting(u8 subsys)
 {
 	struct regs regs;
 
@@ -367,7 +367,7 @@ static int __init select_keymap(void)
 
 static struct input_dev *input_dev;
 
-static int __init setup_input_dev(void)
+static int __devinit setup_input_dev(void)
 {
 	const struct key_entry *key;
 	int error;
@@ -466,6 +466,52 @@ static void poll_bios(unsigned long disc
 	mod_timer(&poll_timer, jiffies + HZ / POLL_FREQUENCY);
 }
 
+static int __devinit wistron_probe(struct platform_device *dev)
+{
+	int err = setup_input_dev();
+	if (err)
+		return err;
+
+	bios_attach();
+	cmos_address = bios_get_cmos_address();
+
+	if (have_wifi) {
+		u16 wifi = bios_get_default_setting(WIFI);
+		if (wifi & 1)
+			wifi_enabled = (wifi & 2) ? 1 : 0;
+		else
+			have_wifi = 0;
+
+		if (have_wifi)
+			bios_set_state(WIFI, wifi_enabled);
+	}
+
+	if (have_bluetooth) {
+		u16 bt = bios_get_default_setting(BLUETOOTH);
+		if (bt & 1)
+			bluetooth_enabled = (bt & 2) ? 1 : 0;
+		else
+			have_bluetooth = 0;
+
+		if (have_bluetooth)
+			bios_set_state(BLUETOOTH, bluetooth_enabled);
+	}
+
+	poll_bios(1); /* Flush stale event queue and arm timer */
+
+	return 0;
+}
+
+static int __devexit wistron_remove(struct platform_device *dev)
+{
+	del_timer_sync(&poll_timer);
+	input_unregister_device(input_dev);
+	bios_detach();
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
 static int wistron_suspend(struct platform_device *dev, pm_message_t state)
 {
 	del_timer_sync(&poll_timer);
@@ -491,13 +537,20 @@ static int wistron_resume(struct platfor
 
 	return 0;
 }
+#else
+#define wistron_suspend		NULL
+#define wistron_resume		NULL
+#endif
 
 static struct platform_driver wistron_driver = {
-	.suspend	= wistron_suspend,
-	.resume		= wistron_resume,
 	.driver		= {
 		.name	= "wistron-bios",
+		.owner	= THIS_MODULE,
 	},
+	.probe		= wistron_probe,
+	.remove		= __devexit_p(wistron_remove),
+	.suspend	= wistron_suspend,
+	.resume		= wistron_resume,
 };
 
 static int __init wb_module_init(void)
@@ -512,55 +565,27 @@ static int __init wb_module_init(void)
 	if (err)
 		return err;
 
-	bios_attach();
-	cmos_address = bios_get_cmos_address();
-
 	err = platform_driver_register(&wistron_driver);
 	if (err)
-		goto err_detach_bios;
+		goto err_unmap_bios;
 
-	wistron_device = platform_device_register_simple("wistron-bios", -1, NULL, 0);
-	if (IS_ERR(wistron_device)) {
-		err = PTR_ERR(wistron_device);
+	wistron_device = platform_device_alloc("wistron-bios", -1);
+	if (!wistron_device) {
+		err = -ENOMEM;
 		goto err_unregister_driver;
 	}
 
-	if (have_wifi) {
-		u16 wifi = bios_get_default_setting(WIFI);
-		if (wifi & 1)
-			wifi_enabled = (wifi & 2) ? 1 : 0;
-		else
-			have_wifi = 0;
-
-		if (have_wifi)
-			bios_set_state(WIFI, wifi_enabled);
-	}
-
-	if (have_bluetooth) {
-		u16 bt = bios_get_default_setting(BLUETOOTH);
-		if (bt & 1)
-			bluetooth_enabled = (bt & 2) ? 1 : 0;
-		else
-			have_bluetooth = 0;
-
-		if (have_bluetooth)
-			bios_set_state(BLUETOOTH, bluetooth_enabled);
-	}
-
-	err = setup_input_dev();
+	err = platform_device_add(wistron_device);
 	if (err)
-		goto err_unregister_device;
-
-	poll_bios(1); /* Flush stale event queue and arm timer */
+		goto err_free_device;
 
 	return 0;
 
- err_unregister_device:
-	platform_device_unregister(wistron_device);
+ err_free_device:
+	platform_device_put(wistron_device);
  err_unregister_driver:
 	platform_driver_unregister(&wistron_driver);
- err_detach_bios:
-	bios_detach();
+ err_unmap_bios:
 	unmap_bios();
 
 	return err;
@@ -568,11 +593,8 @@ static int __init wb_module_init(void)
 
 static void __exit wb_module_exit(void)
 {
-	del_timer_sync(&poll_timer);
-	input_unregister_device(input_dev);
 	platform_device_unregister(wistron_device);
 	platform_driver_unregister(&wistron_driver);
-	bios_detach();
 	unmap_bios();
 }
 

[PATCH 21/24] atkbd: dont lose keymap settings when reconnecting keyboard

[Dmitry Torokhov]

[-- Attachment #1: atkbd-reconnect.patch --]
[-- Type: text/plain, Size: 863 bytes --]

Input: atkbd - don't lose keymap settings when reconnecting keyboard

Call serio_reconnect() instead of serio_rescan() when detecting that
a new keyboard was plugged in. This should help KVM uses losing custom
keymap settings when switching between boxes.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/keyboard/atkbd.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

Index: work/drivers/input/keyboard/atkbd.c
===================================================================
--- work.orig/drivers/input/keyboard/atkbd.c
+++ work/drivers/input/keyboard/atkbd.c
@@ -321,7 +321,7 @@ static irqreturn_t atkbd_interrupt(struc
 	switch (code) {
 		case ATKBD_RET_BAT:
 			atkbd->enabled = 0;
-			serio_rescan(atkbd->ps2dev.serio);
+			serio_reconnect(atkbd->ps2dev.serio);
 			goto out;
 		case ATKBD_RET_EMUL0:
 			atkbd->emul = 1;

[PATCH 22/24] Add missing keys to hid-debug.h

[Dmitry Torokhov]

[-- Attachment #1: hid-debug-more-definitions.patch --]
[-- Type: text/plain, Size: 1470 bytes --]

From: Michael Hanselmann <linux-kernel@hansmi.ch>

Input: add missing keys from input.h to hid-debug.h

Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/usb/input/hid-debug.h |   16 +++++++++++++++-
 1 files changed, 15 insertions(+), 1 deletion(-)

Index: work/drivers/usb/input/hid-debug.h
===================================================================
--- work.orig/drivers/usb/input/hid-debug.h
+++ work/drivers/usb/input/hid-debug.h
@@ -681,7 +681,21 @@ static char *keys[KEY_MAX + 1] = {
 	[KEY_SEND] = "Send",			[KEY_REPLY] = "Reply",
 	[KEY_FORWARDMAIL] = "ForwardMail",	[KEY_SAVE] = "Save",
 	[KEY_DOCUMENTS] = "Documents",
-	[KEY_FN] = "Fn",
+	[KEY_FN] = "Fn",			[KEY_FN_ESC] = "Fn+ESC",
+	[KEY_FN_1] = "Fn+1",			[KEY_FN_2] = "Fn+2",
+	[KEY_FN_B] = "Fn+B",			[KEY_FN_D] = "Fn+D",
+	[KEY_FN_E] = "Fn+E",			[KEY_FN_F] = "Fn+F",
+	[KEY_FN_S] = "Fn+S",
+	[KEY_FN_F1] = "Fn+F1",			[KEY_FN_F2] = "Fn+F2",
+	[KEY_FN_F3] = "Fn+F3",			[KEY_FN_F4] = "Fn+F4",
+	[KEY_FN_F5] = "Fn+F5",			[KEY_FN_F6] = "Fn+F6",
+	[KEY_FN_F7] = "Fn+F7",			[KEY_FN_F8] = "Fn+F8",
+	[KEY_FN_F9] = "Fn+F9",			[KEY_FN_F10] = "Fn+F10",
+	[KEY_FN_F11] = "Fn+F11",		[KEY_FN_F12] = "Fn+F12",
+	[KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle",
+	[KEY_KBDILLUMDOWN] = "KbdIlluminationDown",
+	[KEY_KBDILLUMUP] = "KbdIlluminationUp",
+	[KEY_SWITCHVIDEOMODE] = "SwitchVideoMode",
 };
 
 static char *relatives[REL_MAX + 1] = {

[PATCH 23/24] i8042: Add OQO Zepto to noloop dmi table

[Dmitry Torokhov]

[-- Attachment #1: i8042-OQO-Zepto-noloop-dmi.patch --]
[-- Type: text/plain, Size: 809 bytes --]

From: Ben Collins <bcollins@ubuntu.com>

Input: i8042 - add OQO Zepto to noloop dmi table.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/input/serio/i8042-x86ia64io.h |    8 ++++++++
 1 files changed, 8 insertions(+)

Index: work/drivers/input/serio/i8042-x86ia64io.h
===================================================================
--- work.orig/drivers/input/serio/i8042-x86ia64io.h
+++ work/drivers/input/serio/i8042-x86ia64io.h
@@ -84,6 +84,14 @@ static struct dmi_system_id __initdata i
 			DMI_MATCH(DMI_PRODUCT_VERSION, "DL760"),
 		},
 	},
+	{
+		.ident = "OQO Model 01",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "00"),
+		},
+	},
 	{ }
 };
 

[PATCH 24/24] ibmasm: convert to dynamic input_dev allocation

[Dmitry Torokhov]

[-- Attachment #1: ibmasm-input-dynalloc.patch --]
[-- Type: text/plain, Size: 5259 bytes --]

From: Vernon Mauery <vernux@us.ibm.com>,

Input: ibmasm - convert to dynamic input_dev allocation

Update the ibmasm driver to use the dynamic allocation of input_dev
structs to work with the sysfs subsystem.

Vojtech: Fixed some problems/bugs in the patch.
Dmitry: Fixed some more.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

 drivers/misc/ibmasm/ibmasm.h |    6 +--
 drivers/misc/ibmasm/remote.c |   82 +++++++++++++++++++++++++------------------
 2 files changed, 51 insertions(+), 37 deletions(-)

Index: work/drivers/misc/ibmasm/ibmasm.h
===================================================================
--- work.orig/drivers/misc/ibmasm/ibmasm.h
+++ work/drivers/misc/ibmasm/ibmasm.h
@@ -141,8 +141,8 @@ struct reverse_heartbeat {
 };
 
 struct ibmasm_remote {
-	struct input_dev keybd_dev;
-	struct input_dev mouse_dev;
+	struct input_dev *keybd_dev;
+	struct input_dev *mouse_dev;
 };
 
 struct service_processor {
@@ -157,7 +157,7 @@ struct service_processor {
 	char			dirname[IBMASM_NAME_SIZE];
 	char			devname[IBMASM_NAME_SIZE];
 	unsigned int		number;
-	struct ibmasm_remote	*remote;
+	struct ibmasm_remote	remote;
 	int			serial_line;
 	struct device		*dev;
 };
Index: work/drivers/misc/ibmasm/remote.c
===================================================================
--- work.orig/drivers/misc/ibmasm/remote.c
+++ work/drivers/misc/ibmasm/remote.c
@@ -203,9 +203,9 @@ void ibmasm_handle_mouse_interrupt(struc
 
 		print_input(&input);
 		if (input.type == INPUT_TYPE_MOUSE) {
-			send_mouse_event(&sp->remote->mouse_dev, regs, &input);
+			send_mouse_event(sp->remote.mouse_dev, regs, &input);
 		} else if (input.type == INPUT_TYPE_KEYBOARD) {
-			send_keyboard_event(&sp->remote->keybd_dev, regs, &input);
+			send_keyboard_event(sp->remote.keybd_dev, regs, &input);
 		} else
 			break;
 
@@ -217,56 +217,70 @@ void ibmasm_handle_mouse_interrupt(struc
 int ibmasm_init_remote_input_dev(struct service_processor *sp)
 {
 	/* set up the mouse input device */
-	struct ibmasm_remote *remote;
+	struct input_dev *mouse_dev, *keybd_dev;
 	struct pci_dev *pdev = to_pci_dev(sp->dev);
+	int error = -ENOMEM;
 	int i;
 
-	sp->remote = remote = kmalloc(sizeof(*remote), GFP_KERNEL);
-	if (!remote)
-		return -ENOMEM;
-
-	memset(remote, 0, sizeof(*remote));
-
-	remote->mouse_dev.private = remote;
-	init_input_dev(&remote->mouse_dev);
-	remote->mouse_dev.id.vendor = pdev->vendor;
-	remote->mouse_dev.id.product = pdev->device;
-	remote->mouse_dev.evbit[0]  = BIT(EV_KEY) | BIT(EV_ABS);
-	remote->mouse_dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) |
+	sp->remote.mouse_dev = mouse_dev = input_allocate_device();
+	sp->remote.keybd_dev = keybd_dev = input_allocate_device();
+
+	if (!mouse_dev || !keybd_dev)
+		goto err_free_devices;
+
+	mouse_dev->id.bustype = BUS_PCI;
+	mouse_dev->id.vendor = pdev->vendor;
+	mouse_dev->id.product = pdev->device;
+	mouse_dev->id.version = 1;
+	mouse_dev->evbit[0]  = BIT(EV_KEY) | BIT(EV_ABS);
+	mouse_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) |
 		BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
-	set_bit(BTN_TOUCH, remote->mouse_dev.keybit);
-	remote->mouse_dev.name = remote_mouse_name;
-	input_set_abs_params(&remote->mouse_dev, ABS_X, 0, xmax, 0, 0);
-	input_set_abs_params(&remote->mouse_dev, ABS_Y, 0, ymax, 0, 0);
-
-	remote->keybd_dev.private = remote;
-	init_input_dev(&remote->keybd_dev);
-	remote->keybd_dev.id.vendor = pdev->vendor;
-	remote->keybd_dev.id.product = pdev->device;
-	remote->keybd_dev.evbit[0]  = BIT(EV_KEY);
-	remote->keybd_dev.name = remote_keybd_name;
+	set_bit(BTN_TOUCH, mouse_dev->keybit);
+	mouse_dev->name = remote_mouse_name;
+	input_set_abs_params(mouse_dev, ABS_X, 0, xmax, 0, 0);
+	input_set_abs_params(mouse_dev, ABS_Y, 0, ymax, 0, 0);
+
+	mouse_dev->id.bustype = BUS_PCI;
+	keybd_dev->id.vendor = pdev->vendor;
+	keybd_dev->id.product = pdev->device;
+	mouse_dev->id.version = 2;
+	keybd_dev->evbit[0]  = BIT(EV_KEY);
+	keybd_dev->name = remote_keybd_name;
 
-	for (i=0; i<XLATE_SIZE; i++) {
+	for (i = 0; i < XLATE_SIZE; i++) {
 		if (xlate_high[i])
-			set_bit(xlate_high[i], remote->keybd_dev.keybit);
+			set_bit(xlate_high[i], keybd_dev->keybit);
 		if (xlate[i])
-			set_bit(xlate[i], remote->keybd_dev.keybit);
+			set_bit(xlate[i], keybd_dev->keybit);
 	}
 
-	input_register_device(&remote->mouse_dev);
-	input_register_device(&remote->keybd_dev);
+	error = input_register_device(mouse_dev);
+	if (error)
+		goto err_free_devices;
+
+	error = input_register_device(keybd_dev);
+	if (error)
+		goto err_unregister_mouse_dev;
+
 	enable_mouse_interrupts(sp);
 
 	printk(KERN_INFO "ibmasm remote responding to events on RSA card %d\n", sp->number);
 
 	return 0;
+
+ err_unregister_mouse_dev:
+	input_unregister_device(mouse_dev);
+ err_free_devices:
+	input_free_device(mouse_dev);
+	input_free_device(keybd_dev);
+
+	return error;
 }
 
 void ibmasm_free_remote_input_dev(struct service_processor *sp)
 {
 	disable_mouse_interrupts(sp);
-	input_unregister_device(&sp->remote->keybd_dev);
-	input_unregister_device(&sp->remote->mouse_dev);
-	kfree(sp->remote);
+	input_unregister_device(sp->remote.mouse_dev);
+	input_unregister_device(sp->remote.keybd_dev);
 }
 

Re: [PATCH 24/24] ibmasm: convert to dynamic input_dev allocation

[Vernon Mauery]

Dmitry Torokhov wrote:
> From: Vernon Mauery <vernux@us.ibm.com>,
> 
> Input: ibmasm - convert to dynamic input_dev allocation
> 
> Update the ibmasm driver to use the dynamic allocation of input_dev
> structs to work with the sysfs subsystem.
> 
> Vojtech: Fixed some problems/bugs in the patch.
> Dmitry: Fixed some more.
> 
> Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
> 
>  drivers/misc/ibmasm/ibmasm.h |    6 +--
>  drivers/misc/ibmasm/remote.c |   82 +++++++++++++++++++++++++------------------
>  2 files changed, 51 insertions(+), 37 deletions(-)
> 

> Index: work/drivers/misc/ibmasm/remote.c
> ===================================================================
> --- work.orig/drivers/misc/ibmasm/remote.c
> +++ work/drivers/misc/ibmasm/remote.c

[snip]

>  
> -	input_register_device(&remote->mouse_dev);
> -	input_register_device(&remote->keybd_dev);
> +	error = input_register_device(mouse_dev);
> +	if (error)
> +		goto err_free_devices;
> +
> +	error = input_register_device(keybd_dev);
> +	if (error)
> +		goto err_unregister_mouse_dev;
> +
>  	enable_mouse_interrupts(sp);
>  
>  	printk(KERN_INFO "ibmasm remote responding to events on RSA card %d\n", sp->number);
>  
>  	return 0;
> +
> + err_unregister_mouse_dev:
> +	input_unregister_device(mouse_dev);

If I understand the API correctly now, shouldn't there be a
	mouse_dev = NULL;
right here to prevent the following input_free_device?

--Vernon

> + err_free_devices:
> +	input_free_device(mouse_dev);
> +	input_free_device(keybd_dev);
> +
> +	return error;
>  }
>  
>  void ibmasm_free_remote_input_dev(struct service_processor *sp)
>  {
>  	disable_mouse_interrupts(sp);
> -	input_unregister_device(&sp->remote->keybd_dev);
> -	input_unregister_device(&sp->remote->mouse_dev);
> -	kfree(sp->remote);
> +	input_unregister_device(sp->remote.mouse_dev);
> +	input_unregister_device(sp->remote.keybd_dev);
>  }
>  
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
> 

Re: [PATCH 24/24] ibmasm: convert to dynamic input_dev allocation

[Dmitry Torokhov]

On 1/9/06, Vernon Mauery <vernux@us.ibm.com> wrote:
> Dmitry Torokhov wrote:
> > +
> > + err_unregister_mouse_dev:
> > +     input_unregister_device(mouse_dev);
>
> If I understand the API correctly now, shouldn't there be a
>        mouse_dev = NULL;
> right here to prevent the following input_free_device?
>

Argh, I was saying it needed there and ended up forgetting it :( Wll
fix that tonight.

--
Dmitry

Re: [PATCH 24/24] ibmasm: convert to dynamic input_dev allocation

[Vernon Mauery]

[-- Attachment #1: Type: text/plain, Size: 735 bytes --]

Input: ibmasm - convert to dynamic input_dev allocation

Here is a fixed up patch that adds the mouse_dev = NULL to prevent freeing
memory twice.

Update the ibmasm driver to use the dynamic allocation of input_dev structs to
work with the sysfs subsystem.

Vernon: Added mouse_dev = NULL to error handling
Vojtech: Fixed some problems/bugs in the patch.
Dmitry: Fixed some more.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
---

 ibmasm.h |    6 ++--
 remote.c |   84 ++++++++++++++++++++++++++++++++++++---------------------------
 2 files changed, 52 insertions(+), 38 deletions(-)



[-- Attachment #2: ibmasm_dynamic_allocate_input_device2.patch --]
[-- Type: text/x-patch, Size: 4918 bytes --]

Index: work/drivers/misc/ibmasm/ibmasm.h
===================================================================
--- work.orig/drivers/misc/ibmasm/ibmasm.h
+++ work/drivers/misc/ibmasm/ibmasm.h
@@ -141,8 +141,8 @@ struct reverse_heartbeat {
 };
 
 struct ibmasm_remote {
-	struct input_dev keybd_dev;
-	struct input_dev mouse_dev;
+	struct input_dev *keybd_dev;
+	struct input_dev *mouse_dev;
 };
 
 struct service_processor {
@@ -157,7 +157,7 @@ struct service_processor {
 	char			dirname[IBMASM_NAME_SIZE];
 	char			devname[IBMASM_NAME_SIZE];
 	unsigned int		number;
-	struct ibmasm_remote	*remote;
+	struct ibmasm_remote	remote;
 	int			serial_line;
 	struct device		*dev;
 };
Index: work/drivers/misc/ibmasm/remote.c
===================================================================
--- work.orig/drivers/misc/ibmasm/remote.c
+++ work/drivers/misc/ibmasm/remote.c
@@ -203,9 +203,9 @@ void ibmasm_handle_mouse_interrupt(struc
 
 		print_input(&input);
 		if (input.type == INPUT_TYPE_MOUSE) {
-			send_mouse_event(&sp->remote->mouse_dev, regs, &input);
+			send_mouse_event(sp->remote.mouse_dev, regs, &input);
 		} else if (input.type == INPUT_TYPE_KEYBOARD) {
-			send_keyboard_event(&sp->remote->keybd_dev, regs, &input);
+			send_keyboard_event(sp->remote.keybd_dev, regs, &input);
 		} else
 			break;
 
@@ -217,56 +217,71 @@ void ibmasm_handle_mouse_interrupt(struc
 int ibmasm_init_remote_input_dev(struct service_processor *sp)
 {
 	/* set up the mouse input device */
-	struct ibmasm_remote *remote;
+	struct input_dev *mouse_dev, *keybd_dev;
 	struct pci_dev *pdev = to_pci_dev(sp->dev);
+	int error = -ENOMEM;
 	int i;
 
-	sp->remote = remote = kmalloc(sizeof(*remote), GFP_KERNEL);
-	if (!remote)
-		return -ENOMEM;
-
-	memset(remote, 0, sizeof(*remote));
-
-	remote->mouse_dev.private = remote;
-	init_input_dev(&remote->mouse_dev);
-	remote->mouse_dev.id.vendor = pdev->vendor;
-	remote->mouse_dev.id.product = pdev->device;
-	remote->mouse_dev.evbit[0]  = BIT(EV_KEY) | BIT(EV_ABS);
-	remote->mouse_dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) |
+	sp->remote.mouse_dev = mouse_dev = input_allocate_device();
+	sp->remote.keybd_dev = keybd_dev = input_allocate_device();
+
+	if (!mouse_dev || !keybd_dev)
+		goto err_free_devices;
+
+	mouse_dev->id.bustype = BUS_PCI;
+	mouse_dev->id.vendor = pdev->vendor;
+	mouse_dev->id.product = pdev->device;
+	mouse_dev->id.version = 1;
+	mouse_dev->evbit[0]  = BIT(EV_KEY) | BIT(EV_ABS);
+	mouse_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) |
 		BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
-	set_bit(BTN_TOUCH, remote->mouse_dev.keybit);
-	remote->mouse_dev.name = remote_mouse_name;
-	input_set_abs_params(&remote->mouse_dev, ABS_X, 0, xmax, 0, 0);
-	input_set_abs_params(&remote->mouse_dev, ABS_Y, 0, ymax, 0, 0);
-
-	remote->keybd_dev.private = remote;
-	init_input_dev(&remote->keybd_dev);
-	remote->keybd_dev.id.vendor = pdev->vendor;
-	remote->keybd_dev.id.product = pdev->device;
-	remote->keybd_dev.evbit[0]  = BIT(EV_KEY);
-	remote->keybd_dev.name = remote_keybd_name;
+	set_bit(BTN_TOUCH, mouse_dev->keybit);
+	mouse_dev->name = remote_mouse_name;
+	input_set_abs_params(mouse_dev, ABS_X, 0, xmax, 0, 0);
+	input_set_abs_params(mouse_dev, ABS_Y, 0, ymax, 0, 0);
+
+	mouse_dev->id.bustype = BUS_PCI;
+	keybd_dev->id.vendor = pdev->vendor;
+	keybd_dev->id.product = pdev->device;
+	mouse_dev->id.version = 2;
+	keybd_dev->evbit[0]  = BIT(EV_KEY);
+	keybd_dev->name = remote_keybd_name;
 
-	for (i=0; i<XLATE_SIZE; i++) {
+	for (i = 0; i < XLATE_SIZE; i++) {
 		if (xlate_high[i])
-			set_bit(xlate_high[i], remote->keybd_dev.keybit);
+			set_bit(xlate_high[i], keybd_dev->keybit);
 		if (xlate[i])
-			set_bit(xlate[i], remote->keybd_dev.keybit);
+			set_bit(xlate[i], keybd_dev->keybit);
 	}
 
-	input_register_device(&remote->mouse_dev);
-	input_register_device(&remote->keybd_dev);
+	error = input_register_device(mouse_dev);
+	if (error)
+		goto err_free_devices;
+
+	error = input_register_device(keybd_dev);
+	if (error)
+		goto err_unregister_mouse_dev;
+
 	enable_mouse_interrupts(sp);
 
 	printk(KERN_INFO "ibmasm remote responding to events on RSA card %d\n", sp->number);
 
 	return 0;
+
+ err_unregister_mouse_dev:
+	input_unregister_device(mouse_dev);
+	mouse_dev = NULL;
+ err_free_devices:
+	input_free_device(mouse_dev);
+	input_free_device(keybd_dev);
+
+	return error;
 }
 
 void ibmasm_free_remote_input_dev(struct service_processor *sp)
 {
 	disable_mouse_interrupts(sp);
-	input_unregister_device(&sp->remote->keybd_dev);
-	input_unregister_device(&sp->remote->mouse_dev);
-	kfree(sp->remote);
+	input_unregister_device(sp->remote.mouse_dev);
+	input_unregister_device(sp->remote.keybd_dev);
 }
 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Re: [PATCH 12/24] pcspkr: register with driver core as a platfrom device

[Benjamin Herrenschmidt]

On Sat, 2006-01-07 at 12:16 -0500, Dmitry Torokhov wrote:
> plain text document attachment (pcspkr-platform-device.patch)
> Input: pcspkr - register with driver core as a platfrom device

Hi Dimitri !

That looks great, something we've been wanting to tackle for a while...
except for one thing :)

The actual creation of the device shouldn't be done there... only the
driver should be there. The device instanciation should be moved to the
i386 arch code (and/or any other architecture that might have this
thing).

On ppc64 for example, we have machines that will blow up when that
driver tries to poke random IOs, but we also have machines that do have
that legacy piece of hardware where expected. We can know it from the
firmware, thus we can decide wether to create the platform device or not
from the arch code.

What do you prefer ? Keep that the way you did for now and add some
#ifdef CONFIG_PPC64 with the ppc64 probe code in that driver or do you
want to call all the way to moving the actual device creation to the
platform code (as I think should be done) ?

Cheers,
Ben.

> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
> 
>  drivers/input/misc/pcspkr.c |   86 ++++++++++++++++++++++++++++++++++++++++----
>  1 files changed, 80 insertions(+), 6 deletions(-)
> 
> Index: work/drivers/input/misc/pcspkr.c
> ===================================================================
> --- work.orig/drivers/input/misc/pcspkr.c
> +++ work/drivers/input/misc/pcspkr.c
> @@ -16,6 +16,7 @@
>  #include <linux/module.h>
>  #include <linux/init.h>
>  #include <linux/input.h>
> +#include <linux/platform_device.h>
>  #include <asm/8253pit.h>
>  #include <asm/io.h>
>  
> @@ -23,8 +24,7 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@u
>  MODULE_DESCRIPTION("PC Speaker beeper driver");
>  MODULE_LICENSE("GPL");
>  
> -static struct input_dev *pcspkr_dev;
> -
> +static struct platform_device *pcspkr_platform_device;
>  static DEFINE_SPINLOCK(i8253_beep_lock);
>  
>  static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
> @@ -64,8 +64,11 @@ static int pcspkr_event(struct input_dev
>  	return 0;
>  }
>  
> -static int __init pcspkr_init(void)
> +static int __devinit pcspkr_probe(struct platform_device *dev)
>  {
> +	struct input_dev *pcspkr_dev;
> +	int err;
> +
>  	pcspkr_dev = input_allocate_device();
>  	if (!pcspkr_dev)
>  		return -ENOMEM;
> @@ -76,21 +79,92 @@ static int __init pcspkr_init(void)
>  	pcspkr_dev->id.vendor = 0x001f;
>  	pcspkr_dev->id.product = 0x0001;
>  	pcspkr_dev->id.version = 0x0100;
> +	pcspkr_dev->cdev.dev = &dev->dev;
>  
>  	pcspkr_dev->evbit[0] = BIT(EV_SND);
>  	pcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
>  	pcspkr_dev->event = pcspkr_event;
>  
> -	input_register_device(pcspkr_dev);
> +	err = input_register_device(pcspkr_dev);
> +	if (err) {
> +		input_free_device(pcspkr_dev);
> +		return err;
> +	}
> +
> +	platform_set_drvdata(dev, pcspkr_dev);
>  
>  	return 0;
>  }
>  
> -static void __exit pcspkr_exit(void)
> +static int __devexit pcspkr_remove(struct platform_device *dev)
>  {
> -        input_unregister_device(pcspkr_dev);
> +	struct input_dev *pcspkr_dev = platform_get_drvdata(dev);
> +
> +	input_unregister_device(pcspkr_dev);
> +	platform_set_drvdata(dev, NULL);
>  	/* turn off the speaker */
>  	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
> +
> +	return 0;
> +}
> +
> +static int pcspkr_suspend(struct platform_device *dev, pm_message_t state)
> +{
> +	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
> +
> +	return 0;
> +}
> +
> +static void pcspkr_shutdown(struct platform_device *dev)
> +{
> +	/* turn off the speaker */
> +	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
> +}
> +
> +static struct platform_driver pcspkr_platform_driver = {
> +	.driver		= {
> +		.name	= "pcspkr",
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= pcspkr_probe,
> +	.remove		= __devexit_p(pcspkr_remove),
> +	.suspend	= pcspkr_suspend,
> +	.shutdown	= pcspkr_shutdown,
> +};
> +
> +
> +static int __init pcspkr_init(void)
> +{
> +	int err;
> +
> +	err = platform_driver_register(&pcspkr_platform_driver);
> +	if (err)
> +		return err;
> +
> +	pcspkr_platform_device = platform_device_alloc("pcspkr", -1);
> +	if (!pcspkr_platform_device) {
> +		err = -ENOMEM;
> +		goto err_unregister_driver;
> +	}
> +
> +	err = platform_device_add(pcspkr_platform_device);
> +	if (err)
> +		goto err_free_device;
> +
> +	return 0;
> +
> + err_free_device:
> +	platform_device_put(pcspkr_platform_device);
> + err_unregister_driver:
> +	platform_driver_unregister(&pcspkr_platform_driver);
> +
> +	return err;
> +}
> +
> +static void __exit pcspkr_exit(void)
> +{
> +	platform_device_unregister(pcspkr_platform_device);
> +	platform_driver_unregister(&pcspkr_platform_driver);
>  }
>  
>  module_init(pcspkr_init);
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: [PATCH 12/24] pcspkr: register with driver core as a platfrom device

[Dmitry Torokhov]

On Tuesday 10 January 2006 01:41, Benjamin Herrenschmidt wrote:
> On Sat, 2006-01-07 at 12:16 -0500, Dmitry Torokhov wrote:
> > plain text document attachment (pcspkr-platform-device.patch)
> > Input: pcspkr - register with driver core as a platfrom device
> 
> Hi Dimitri !
> 
> That looks great, something we've been wanting to tackle for a while...
> except for one thing :)
> 
> The actual creation of the device shouldn't be done there... only the
> driver should be there. The device instanciation should be moved to the
> i386 arch code (and/or any other architecture that might have this
> thing).
> 
> On ppc64 for example, we have machines that will blow up when that
> driver tries to poke random IOs, but we also have machines that do have
> that legacy piece of hardware where expected. We can know it from the
> firmware, thus we can decide wether to create the platform device or not
> from the arch code.
> 
> What do you prefer ? Keep that the way you did for now and add some
> #ifdef CONFIG_PPC64 with the ppc64 probe code in that driver or do you
> want to call all the way to moving the actual device creation to the
> platform code (as I think should be done) ?
> 

Having platform code instantiate platform devices would be great but I
wonder how it will look like on x86 where we don't have a way to enumerate
devices. ACPI might do it but I am not sure if all DSDTs describe beepers...

-- 
Dmitry

Re: [PATCH 12/24] pcspkr: register with driver core as a platfrom device

[Benjamin Herrenschmidt]

> Having platform code instantiate platform devices would be great but I
> wonder how it will look like on x86 where we don't have a way to enumerate
> devices. ACPI might do it but I am not sure if all DSDTs describe beepers...

I don't know the gory details about x86 so I'll let others decide what
to do there... can't it start by instanciating it unconditionally +/-
maybe a kernel command line to "skip" it in case the hw is really not
legacy ?

Ben.

Re: [PATCH 12/24] pcspkr: register with driver core as a platfrom device

[Dmitry Torokhov]

On Tuesday 10 January 2006 02:04, Benjamin Herrenschmidt wrote:
> 
> > Having platform code instantiate platform devices would be great but I
> > wonder how it will look like on x86 where we don't have a way to enumerate
> > devices. ACPI might do it but I am not sure if all DSDTs describe beepers...
> 
> I don't know the gory details about x86 so I'll let others decide what
> to do there... can't it start by instanciating it unconditionally +/-
> maybe a kernel command line to "skip" it in case the hw is really not
> legacy ?
>

Maybe.. I need to think about it...

-- 
Dmitry