From: Adrian Bunk <bunk@stusta.de>
To: Andrew Morton <akpm@osdl.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: [2.6 patch] always enable CONFIG_PDC202XX_FORCE
Date: Sun, 29 Jan 2006 00:04:56 +0100 [thread overview]
Message-ID: <20060128230456.GW3777@stusta.de> (raw)
This patch removes the CONFIG_PDC202XX_FORCE=n case.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was already sent on:
- 22 Jan 2006
- 14 Jan 2006
drivers/ide/Kconfig | 7 -------
drivers/ide/pci/pdc202xx_new.c | 6 ------
drivers/ide/pci/pdc202xx_old.c | 15 ---------------
3 files changed, 28 deletions(-)
--- linux-2.6.15-mm4-full/drivers/ide/Kconfig.old 2006-01-14 20:43:13.000000000 +0100
+++ linux-2.6.15-mm4-full/drivers/ide/Kconfig 2006-01-14 20:43:23.000000000 +0100
@@ -673,13 +673,6 @@
config BLK_DEV_PDC202XX_NEW
tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
-# FIXME - probably wants to be one for old and for new
-config PDC202XX_FORCE
- bool "Enable controller even if disabled by BIOS"
- depends on BLK_DEV_PDC202XX_NEW
- help
- Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
-
config BLK_DEV_SVWKS
tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
help
--- linux-2.6.15-mm4-full/drivers/ide/pci/pdc202xx_new.c.old 2006-01-14 20:43:30.000000000 +0100
+++ linux-2.6.15-mm4-full/drivers/ide/pci/pdc202xx_new.c 2006-01-14 20:43:51.000000000 +0100
@@ -420,9 +420,6 @@
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
},{ /* 3 */
.name = "PDC20271",
@@ -447,9 +444,6 @@
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
},{ /* 6 */
.name = "PDC20277",
--- linux-2.6.15-mm4-full/drivers/ide/pci/pdc202xx_old.c.old 2006-01-14 20:44:01.000000000 +0100
+++ linux-2.6.15-mm4-full/drivers/ide/pci/pdc202xx_old.c 2006-01-14 20:44:21.000000000 +0100
@@ -786,9 +786,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 16,
},{ /* 1 */
@@ -799,9 +796,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
.flags = IDEPCI_FLAG_FORCE_PDC,
@@ -813,9 +807,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
},{ /* 3 */
@@ -826,9 +817,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
.flags = IDEPCI_FLAG_FORCE_PDC,
@@ -840,9 +828,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
}
next reply other threads:[~2006-01-28 23:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-28 23:04 Adrian Bunk [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-01-22 17:12 [2.6 patch] always enable CONFIG_PDC202XX_FORCE Adrian Bunk
2006-03-27 14:25 ` Sergei Shtylylov
2006-03-27 14:40 ` Bartlomiej Zolnierkiewicz
2006-01-14 15:21 [2.6 patch] Fix PDC202XX_FORCE kconfig selection Adrian Bunk
2006-01-14 16:13 ` Alan Cox
2006-01-14 17:47 ` Bartlomiej Zolnierkiewicz
2006-01-14 19:55 ` [2.6 patch] always enable CONFIG_PDC202XX_FORCE Adrian Bunk
2006-01-15 1:07 ` Alan Cox
2006-01-15 1:50 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060128230456.GW3777@stusta.de \
--to=bunk@stusta.de \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).