* [PATCH] add slab_is_available() routine for boot code
@ 2006-05-10 20:55 Mike Kravetz
2006-05-10 22:50 ` Andrew Morton
2006-05-11 6:15 ` Pekka J Enberg
0 siblings, 2 replies; 6+ messages in thread
From: Mike Kravetz @ 2006-05-10 20:55 UTC (permalink / raw)
To: Andrew Morton
Cc: Pekka J Enberg, Christoph Lameter, Dave Hansen, linux-kernel
slab_is_available() indicates slab based allocators are available
for use. SPARSEMEM code needs to know this as it can be called
at various times during the boot process.
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
diff -Naupr linux-2.6.17-rc3-mm1/include/linux/slab.h linux-2.6.17-rc3-mm1.work3/include/linux/slab.h
--- linux-2.6.17-rc3-mm1/include/linux/slab.h 2006-05-03 22:19:15.000000000 +0000
+++ linux-2.6.17-rc3-mm1.work3/include/linux/slab.h 2006-05-10 19:15:20.000000000 +0000
@@ -150,6 +150,7 @@ static inline void *kcalloc(size_t n, si
extern void kfree(const void *);
extern unsigned int ksize(const void *);
+extern int slab_is_available(void);
#ifdef CONFIG_NUMA
extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node);
diff -Naupr linux-2.6.17-rc3-mm1/mm/slab.c linux-2.6.17-rc3-mm1.work3/mm/slab.c
--- linux-2.6.17-rc3-mm1/mm/slab.c 2006-05-03 22:19:16.000000000 +0000
+++ linux-2.6.17-rc3-mm1.work3/mm/slab.c 2006-05-10 21:43:08.000000000 +0000
@@ -694,6 +694,14 @@ static enum {
FULL
} g_cpucache_up;
+/*
+ * used by boot code to determine if it can use slab based allocator
+ */
+int slab_is_available(void)
+{
+ return g_cpucache_up == FULL;
+}
+
static DEFINE_PER_CPU(struct work_struct, reap_work);
static void free_block(struct kmem_cache *cachep, void **objpp, int len,
diff -Naupr linux-2.6.17-rc3-mm1/mm/sparse.c linux-2.6.17-rc3-mm1.work3/mm/sparse.c
--- linux-2.6.17-rc3-mm1/mm/sparse.c 2006-05-03 22:19:16.000000000 +0000
+++ linux-2.6.17-rc3-mm1.work3/mm/sparse.c 2006-05-10 19:15:56.000000000 +0000
@@ -32,7 +32,7 @@ static struct mem_section *sparse_index_
unsigned long array_size = SECTIONS_PER_ROOT *
sizeof(struct mem_section);
- if (system_state == SYSTEM_RUNNING)
+ if (slab_is_available())
section = kmalloc_node(array_size, GFP_KERNEL, nid);
else
section = alloc_bootmem_node(NODE_DATA(nid), array_size);
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] add slab_is_available() routine for boot code
2006-05-10 20:55 [PATCH] add slab_is_available() routine for boot code Mike Kravetz
@ 2006-05-10 22:50 ` Andrew Morton
2006-05-10 23:00 ` Mike Kravetz
2006-05-11 6:15 ` Pekka J Enberg
1 sibling, 1 reply; 6+ messages in thread
From: Andrew Morton @ 2006-05-10 22:50 UTC (permalink / raw)
To: Mike Kravetz; +Cc: penberg, clameter, haveblue, linux-kernel
Mike Kravetz <kravetz@us.ibm.com> wrote:
>
> slab_is_available() indicates slab based allocators are available
> for use. SPARSEMEM code needs to know this as it can be called
> at various times during the boot process.
>
> Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
>
> diff -Naupr linux-2.6.17-rc3-mm1/include/linux/slab.h linux-2.6.17-rc3-mm1.work3/include/linux/slab.h
> --- linux-2.6.17-rc3-mm1/include/linux/slab.h 2006-05-03 22:19:15.000000000 +0000
> +++ linux-2.6.17-rc3-mm1.work3/include/linux/slab.h 2006-05-10 19:15:20.000000000 +0000
> @@ -150,6 +150,7 @@ static inline void *kcalloc(size_t n, si
>
> extern void kfree(const void *);
> extern unsigned int ksize(const void *);
> +extern int slab_is_available(void);
>
> #ifdef CONFIG_NUMA
> extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node);
> diff -Naupr linux-2.6.17-rc3-mm1/mm/slab.c linux-2.6.17-rc3-mm1.work3/mm/slab.c
> --- linux-2.6.17-rc3-mm1/mm/slab.c 2006-05-03 22:19:16.000000000 +0000
> +++ linux-2.6.17-rc3-mm1.work3/mm/slab.c 2006-05-10 21:43:08.000000000 +0000
> @@ -694,6 +694,14 @@ static enum {
> FULL
> } g_cpucache_up;
>
> +/*
> + * used by boot code to determine if it can use slab based allocator
> + */
> +int slab_is_available(void)
> +{
> + return g_cpucache_up == FULL;
> +}
Even I can understand this ;)
> static DEFINE_PER_CPU(struct work_struct, reap_work);
>
> static void free_block(struct kmem_cache *cachep, void **objpp, int len,
> diff -Naupr linux-2.6.17-rc3-mm1/mm/sparse.c linux-2.6.17-rc3-mm1.work3/mm/sparse.c
> --- linux-2.6.17-rc3-mm1/mm/sparse.c 2006-05-03 22:19:16.000000000 +0000
> +++ linux-2.6.17-rc3-mm1.work3/mm/sparse.c 2006-05-10 19:15:56.000000000 +0000
> @@ -32,7 +32,7 @@ static struct mem_section *sparse_index_
> unsigned long array_size = SECTIONS_PER_ROOT *
> sizeof(struct mem_section);
>
> - if (system_state == SYSTEM_RUNNING)
> + if (slab_is_available())
> section = kmalloc_node(array_size, GFP_KERNEL, nid);
> else
> section = alloc_bootmem_node(NODE_DATA(nid), array_size);
Is this a needed-for-2.6.17 fix?
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] add slab_is_available() routine for boot code
2006-05-10 22:50 ` Andrew Morton
@ 2006-05-10 23:00 ` Mike Kravetz
2006-05-11 3:07 ` Benjamin Herrenschmidt
2006-05-11 12:40 ` Arnd Bergmann
0 siblings, 2 replies; 6+ messages in thread
From: Mike Kravetz @ 2006-05-10 23:00 UTC (permalink / raw)
To: Andrew Morton, Arnd Bergmann; +Cc: penberg, clameter, haveblue, linux-kernel
On Wed, May 10, 2006 at 03:50:26PM -0700, Andrew Morton wrote:
> Mike Kravetz <kravetz@us.ibm.com> wrote:
> > diff -Naupr linux-2.6.17-rc3-mm1/mm/sparse.c linux-2.6.17-rc3-mm1.work3/mm/sparse.c
> > --- linux-2.6.17-rc3-mm1/mm/sparse.c 2006-05-03 22:19:16.000000000 +0000
> > +++ linux-2.6.17-rc3-mm1.work3/mm/sparse.c 2006-05-10 19:15:56.000000000 +0000
> > @@ -32,7 +32,7 @@ static struct mem_section *sparse_index_
> > unsigned long array_size = SECTIONS_PER_ROOT *
> > sizeof(struct mem_section);
> >
> > - if (system_state == SYSTEM_RUNNING)
> > + if (slab_is_available())
> > section = kmalloc_node(array_size, GFP_KERNEL, nid);
> > else
> > section = alloc_bootmem_node(NODE_DATA(nid), array_size);
>
> Is this a needed-for-2.6.17 fix?
I'll let Arnd answer. He ran into this when doing some Cell work. Not
sure where in the development cycle the code is that exposes this bug.
--
Mike
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] add slab_is_available() routine for boot code
2006-05-10 23:00 ` Mike Kravetz
@ 2006-05-11 3:07 ` Benjamin Herrenschmidt
2006-05-11 12:40 ` Arnd Bergmann
1 sibling, 0 replies; 6+ messages in thread
From: Benjamin Herrenschmidt @ 2006-05-11 3:07 UTC (permalink / raw)
To: Mike Kravetz
Cc: Andrew Morton, Arnd Bergmann, penberg, clameter, haveblue, linux-kernel
> I'll let Arnd answer. He ran into this when doing some Cell work. Not
> sure where in the development cycle the code is that exposes this bug.
I want that too for some other unrelated patches :) I want request_irq()
to use alloc_bootmem when slab is not available so that some low level
arch irqs can be requested at init_IRQ() time.
(Typically IRQs for cascaded controllers). We currently define
statically irqaction structures for them and call setup_irq() on them,
this is gross :)
Cheers,
Ben.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] add slab_is_available() routine for boot code
2006-05-10 23:00 ` Mike Kravetz
2006-05-11 3:07 ` Benjamin Herrenschmidt
@ 2006-05-11 12:40 ` Arnd Bergmann
1 sibling, 0 replies; 6+ messages in thread
From: Arnd Bergmann @ 2006-05-11 12:40 UTC (permalink / raw)
To: Mike Kravetz; +Cc: Andrew Morton, penberg, clameter, haveblue, linux-kernel
On Thursday 11 May 2006 01:00, Mike Kravetz wrote:
> On Wed, May 10, 2006 at 03:50:26PM -0700, Andrew Morton wrote:
> >
> > Is this a needed-for-2.6.17 fix?
>
> I'll let Arnd answer. He ran into this when doing some Cell work. Not
> sure where in the development cycle the code is that exposes this bug.
The code in 2.6.17 breaks when spufs is non-modular. Currently, this is
a compile-time option so users can work around it by building spufs
as a loadable module.
For 2.6.18, we want to make the part of spufs that calls this
non-modular in order to avoid adding further EXPORT_SYMBOLs. I would
much prefer to have the fix in 2.6.17 already, but we could
alternatively force spufs to be a loadable module in 2.6.17 and
change it later.
Arnd <><
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] add slab_is_available() routine for boot code
2006-05-10 20:55 [PATCH] add slab_is_available() routine for boot code Mike Kravetz
2006-05-10 22:50 ` Andrew Morton
@ 2006-05-11 6:15 ` Pekka J Enberg
1 sibling, 0 replies; 6+ messages in thread
From: Pekka J Enberg @ 2006-05-11 6:15 UTC (permalink / raw)
To: Mike Kravetz; +Cc: Andrew Morton, Christoph Lameter, Dave Hansen, linux-kernel
On Wed, 10 May 2006, Mike Kravetz wrote:
> +/*
> + * used by boot code to determine if it can use slab based allocator
> + */
> +int slab_is_available(void)
> +{
> + return g_cpucache_up == FULL;
> +}
> +
Please use proper kerneldoc format so you don't create extra work for
janitors.
Pekka
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-05-11 12:40 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-05-10 20:55 [PATCH] add slab_is_available() routine for boot code Mike Kravetz
2006-05-10 22:50 ` Andrew Morton
2006-05-10 23:00 ` Mike Kravetz
2006-05-11 3:07 ` Benjamin Herrenschmidt
2006-05-11 12:40 ` Arnd Bergmann
2006-05-11 6:15 ` Pekka J Enberg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).