* pata_marvell and Marvell 88SE6121
@ 2006-12-16 17:41 Jose Alberto Reguero
2006-12-16 19:31 ` Alan
2007-01-02 17:19 ` Jose Alberto Reguero
0 siblings, 2 replies; 4+ messages in thread
From: Jose Alberto Reguero @ 2006-12-16 17:41 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 359 bytes --]
I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with
Marvell 88SE6121.
I added the PCI ID: 0x6121
{ PCI_DEVICE(0x11AB, 0x6101), },
{ PCI_DEVICE(0x11AB, 0x6145), },
{ PCI_DEVICE(0x11AB, 0x6121), },
{ } /* terminate list */
But not succes.
Log attached.
Any hints are welcome.
Thanks.
Jose Alberto
[-- Attachment #2: log --]
[-- Type: text/plain, Size: 682 bytes --]
Dec 16 12:22:58 jar kernel: ata3: PATA max UDMA/100 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 28
Dec 16 12:22:58 jar kernel: ata4: PATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 28
Dec 16 12:22:58 jar kernel: scsi3 : pata_marvell
Dec 16 12:22:58 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 16 12:22:58 jar kernel: ATA: abnormal status 0x7F on port 0xEC07
Dec 16 12:22:58 jar kernel: scsi4 : pata_marvell
Dec 16 12:22:58 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 16 12:22:58 jar kernel: ATA: abnormal status 0x7F on port 0xE807
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: pata_marvell and Marvell 88SE6121
2006-12-16 17:41 pata_marvell and Marvell 88SE6121 Jose Alberto Reguero
@ 2006-12-16 19:31 ` Alan
2006-12-17 13:22 ` Jose Alberto Reguero
2007-01-02 17:19 ` Jose Alberto Reguero
1 sibling, 1 reply; 4+ messages in thread
From: Alan @ 2006-12-16 19:31 UTC (permalink / raw)
To: Jose Alberto Reguero; +Cc: linux-kernel
On Sat, 16 Dec 2006 18:41:26 +0100
Jose Alberto Reguero <jareguero@telefonica.net> wrote:
> I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with
> Marvell 88SE6121.
The 6121 is I believe ahci.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: pata_marvell and Marvell 88SE6121
2006-12-16 19:31 ` Alan
@ 2006-12-17 13:22 ` Jose Alberto Reguero
0 siblings, 0 replies; 4+ messages in thread
From: Jose Alberto Reguero @ 2006-12-17 13:22 UTC (permalink / raw)
To: Alan; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 522 bytes --]
El Sábado, 16 de Diciembre de 2006 20:31, Alan escribió:
> On Sat, 16 Dec 2006 18:41:26 +0100
>
> Jose Alberto Reguero <jareguero@telefonica.net> wrote:
> > I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with
> > Marvell 88SE6121.
>
> The 6121 is I believe ahci.
So there is no change to make work with pata_marvell ?
I thought that 61xx series was similar.
Do you suggest to try with ahci driver?
I atach new log with kernel 2.6.19 and pata_marvell patch.
Thanks.
Jose Alberto
[-- Attachment #2: log --]
[-- Type: text/plain, Size: 1920 bytes --]
Dec 17 13:07:28 jar kernel: ata3: PATA max UDMA/100 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 28
Dec 17 13:07:28 jar kernel: ata4: PATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 28
Dec 17 13:07:28 jar kernel: scsi2 : pata_marvell
Dec 17 13:07:28 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xEC07
Dec 17 13:07:28 jar kernel: scsi3 : pata_marvell
Dec 17 13:07:28 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:07:28 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:07:58 jar kernel: ata4.00: qc timeout (cmd 0xec)
Dec 17 13:07:58 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Dec 17 13:07:59 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 17 13:07:59 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:07:59 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:08:29 jar kernel: ata4.00: qc timeout (cmd 0xec)
Dec 17 13:08:29 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Dec 17 13:08:29 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 17 13:08:30 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:08:30 jar kernel: ATA: abnormal status 0x7F on port 0xE807
Dec 17 13:09:00 jar kernel: ata4.00: qc timeout (cmd 0xec)
Dec 17 13:09:00 jar kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Dec 17 13:09:00 jar kernel: BAR5:00:02 01:7F 02:22 03:CA 04:00 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:07 0D:00 0E:00 0F:00
Dec 17 13:14:30 jar vdr: [3345] connect from 127.0.0.1, port 33449 - accepted
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: pata_marvell and Marvell 88SE6121
2006-12-16 17:41 pata_marvell and Marvell 88SE6121 Jose Alberto Reguero
2006-12-16 19:31 ` Alan
@ 2007-01-02 17:19 ` Jose Alberto Reguero
1 sibling, 0 replies; 4+ messages in thread
From: Jose Alberto Reguero @ 2007-01-02 17:19 UTC (permalink / raw)
To: linux-kernel
El Sábado, 16 de Diciembre de 2006 18:41, Jose Alberto Reguero escribió:
> I am trying to make work the driver pata_marvell of linux-2.6.20-rc1 with
> Marvell 88SE6121.
> I added the PCI ID: 0x6121
>
> { PCI_DEVICE(0x11AB, 0x6101), },
> { PCI_DEVICE(0x11AB, 0x6145), },
> { PCI_DEVICE(0x11AB, 0x6121), },
> { } /* terminate list */
>
> But not succes.
>
It is posible to configure three ports (more than two ports) with this driver?
Thanks.
Jose Alberto
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-01-02 17:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-12-16 17:41 pata_marvell and Marvell 88SE6121 Jose Alberto Reguero
2006-12-16 19:31 ` Alan
2006-12-17 13:22 ` Jose Alberto Reguero
2007-01-02 17:19 ` Jose Alberto Reguero
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).