From: Ingo Molnar <mingo@elte.hu>
To: Andi Kleen <ak@suse.de>
Cc: jbohac@suse.cz, linux-kernel@vger.kernel.org,
Vojtech Pavlik <vojtech@suse.cz>,
arjan@infradead.org, tglx@linutronix.de, johnstul@us.ibm.com,
Andrew Morton <akpm@osdl.org>
Subject: Re: [-mm patch] x86_64 GTOD: offer scalable vgettimeofday II
Date: Thu, 1 Feb 2007 13:24:33 +0100 [thread overview]
Message-ID: <20070201122433.GA5255@elte.hu> (raw)
In-Reply-To: <200702011317.45876.ak@suse.de>
* Andi Kleen <ak@suse.de> wrote:
> > The 'price' paid for it is lower resolution - but it's still good
> > for those benchmarking TPC-C runs - and /alot/ simpler.
>
> BTW another comment: I was told that at least one of the big databases
> wants ms resolution here. So to make your scheme work would require a
> HZ=1024 regular interrupt. [...]
if resolution is an issue then i can improve this thing to be based off
a separate /optional/ hrtimer, thus if it's enabled it could enable 1000
Hz (and not 1024 Hz) update for the variable. The update resolution
could be tuned via a sysctl trivially, so everyone could tune the
resolution of this to the value desired, and could do so runtime.
[ It could also be driven by the database right now: from a thread open
/dev/rtc, set it to 1024 HZ, and do a gettimeofday() call in every
tick - that will auto-update the timestamp. ]
> [...] But that would also make everything slower again due to CPU
> overhead as it was learned in the 2.4->2.6 HZ transition.
note that this cost was measured on UP and on older hardware, and the
cost of having a global 1000 Hz update gets linearly cheaper with the
increase of CPUs on SMP: because only one such update has to be running.
The systems those database vendors are interested in typically have a
fair number of CPUs.
Ingo
next prev parent reply other threads:[~2007-02-01 12:25 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-01 9:59 [patch 0/9] x86_64: reliable TSC-based gettimeofday jbohac
2007-02-01 9:59 ` [patch 1/9] Fix HPET init race jbohac
2007-02-02 2:34 ` Andrew Morton
2007-02-06 16:44 ` Jiri Bohac
2007-02-07 0:12 ` Andrew Morton
2007-02-10 12:31 ` Andi Kleen
2007-07-26 20:58 ` Robin Holt
2007-02-01 9:59 ` [patch 2/9] Remove the support for the VXTIME_PMTMR timer mode jbohac
2007-02-01 11:13 ` Andi Kleen
2007-02-01 13:13 ` Jiri Bohac
2007-02-01 13:13 ` Andi Kleen
2007-02-01 13:59 ` Jiri Bohac
2007-02-01 14:18 ` Andi Kleen
2007-02-01 9:59 ` [patch 3/9] Remove the support for the VXTIME_HPET " jbohac
2007-02-01 9:59 ` [patch 4/9] Remove the TSC synchronization on SMP machines jbohac
2007-02-01 11:14 ` Andi Kleen
2007-02-01 13:17 ` Jiri Bohac
2007-02-01 15:16 ` Vojtech Pavlik
2007-02-02 7:14 ` Andi Kleen
2007-02-13 0:34 ` Christoph Lameter
2007-02-13 6:40 ` Arjan van de Ven
2007-02-13 8:28 ` Andi Kleen
2007-02-13 8:41 ` Arjan van de Ven
2007-02-13 17:09 ` Christoph Lameter
2007-02-13 17:20 ` Andi Kleen
2007-02-13 22:18 ` Vojtech Pavlik
2007-02-13 22:38 ` Andrea Arcangeli
2007-02-14 6:59 ` Vojtech Pavlik
2007-02-13 23:55 ` Christoph Lameter
2007-02-14 0:18 ` Paul Mackerras
2007-02-14 0:25 ` john stultz
2007-02-02 7:13 ` Andi Kleen
2007-02-01 21:05 ` mbligh
2007-02-03 1:16 ` H. Peter Anvin
2007-02-01 9:59 ` [patch 5/9] Add all the necessary structures to the vsyscall page jbohac
2007-02-01 11:17 ` Andi Kleen
2007-02-01 9:59 ` [patch 6/9] Add the "Master Timer" jbohac
2007-02-01 11:22 ` Andi Kleen
2007-02-01 13:29 ` Jiri Bohac
2007-02-01 9:59 ` [patch 7/9] Adapt the time initialization code jbohac
2007-02-01 11:26 ` Andi Kleen
2007-02-01 13:41 ` Jiri Bohac
2007-02-01 10:00 ` [patch 8/9] Add time_update_mt_guess() jbohac
2007-02-01 11:28 ` Andi Kleen
2007-02-01 13:54 ` Jiri Bohac
2007-02-01 10:00 ` [patch 9/9] Make use of the Master Timer jbohac
2007-02-01 11:36 ` Andi Kleen
2007-02-01 14:29 ` Jiri Bohac
2007-02-01 15:23 ` Vojtech Pavlik
2007-02-02 7:05 ` Andi Kleen
2007-02-02 7:04 ` Andi Kleen
2007-02-01 11:20 ` [patch 0/9] x86_64: reliable TSC-based gettimeofday Andi Kleen
2007-02-01 11:53 ` Andrea Arcangeli
2007-02-01 12:02 ` Andi Kleen
2007-02-01 12:54 ` Andrea Arcangeli
2007-02-01 12:17 ` Ingo Molnar
2007-02-01 14:52 ` Jiri Bohac
2007-02-01 16:56 ` john stultz
2007-02-01 19:41 ` Vojtech Pavlik
2007-02-01 11:34 ` Ingo Molnar
2007-02-01 11:46 ` [-mm patch] x86_64 GTOD: offer scalable vgettimeofday Ingo Molnar
2007-02-01 12:01 ` Andi Kleen
2007-02-01 12:14 ` Ingo Molnar
2007-02-01 12:17 ` [-mm patch] x86_64 GTOD: offer scalable vgettimeofday II Andi Kleen
2007-02-01 12:24 ` Ingo Molnar [this message]
2007-02-01 12:45 ` Andi Kleen
2007-02-02 4:22 ` [patch 0/9] x86_64: reliable TSC-based gettimeofday Andrew Morton
2007-02-02 7:07 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070201122433.GA5255@elte.hu \
--to=mingo@elte.hu \
--cc=ak@suse.de \
--cc=akpm@osdl.org \
--cc=arjan@infradead.org \
--cc=jbohac@suse.cz \
--cc=johnstul@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).