* [PATCH 7/12] acpi: fix another compile warning
@ 2007-06-19 22:50 Andreas Herrmann
2007-06-20 3:38 ` Len Brown
0 siblings, 1 reply; 15+ messages in thread
From: Andreas Herrmann @ 2007-06-19 22:50 UTC (permalink / raw)
To: linux-kernel, linux-acpi
Avoid compile warning if !ACPI_BLACKLIST_YEAR
CC drivers/acpi/blacklist.o
drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
---
drivers/acpi/blacklist.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 3ec110c..ac96c47 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -73,7 +73,7 @@ static struct acpi_blacklist_item acpi_blacklist[] __initdata = {
{""}
};
-#if CONFIG_ACPI_BLACKLIST_YEAR
+#if defined(CONFIG_ACPI_BLACKLIST_YEAR) && CONFIG_ACPI_BLACKLIST_YEAR
static int __init blacklist_by_year(void)
{
--
1.5.0.7
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-19 22:50 [PATCH 7/12] acpi: fix another compile warning Andreas Herrmann
@ 2007-06-20 3:38 ` Len Brown
2007-06-20 3:49 ` Randy Dunlap
2007-06-20 8:49 ` Andreas Herrmann
0 siblings, 2 replies; 15+ messages in thread
From: Len Brown @ 2007-06-20 3:38 UTC (permalink / raw)
To: Andreas Herrmann; +Cc: linux-kernel, linux-acpi
On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
> Avoid compile warning if !ACPI_BLACKLIST_YEAR
>
> CC drivers/acpi/blacklist.o
> drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
How were you able to produce a .config with CONFIG_ACPI_BLACKLIST_YEAR not defined?
Can you send it to me?
thanks,
-Len
> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
> ---
> drivers/acpi/blacklist.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
> index 3ec110c..ac96c47 100644
> --- a/drivers/acpi/blacklist.c
> +++ b/drivers/acpi/blacklist.c
> @@ -73,7 +73,7 @@ static struct acpi_blacklist_item acpi_blacklist[] __initdata = {
> {""}
> };
>
> -#if CONFIG_ACPI_BLACKLIST_YEAR
> +#if defined(CONFIG_ACPI_BLACKLIST_YEAR) && CONFIG_ACPI_BLACKLIST_YEAR
>
> static int __init blacklist_by_year(void)
> {
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 3:38 ` Len Brown
@ 2007-06-20 3:49 ` Randy Dunlap
2007-06-20 3:51 ` Randy Dunlap
2007-06-20 8:49 ` Andreas Herrmann
1 sibling, 1 reply; 15+ messages in thread
From: Randy Dunlap @ 2007-06-20 3:49 UTC (permalink / raw)
To: Len Brown; +Cc: Andreas Herrmann, linux-kernel, linux-acpi
On Tue, 19 Jun 2007 23:38:02 -0400 Len Brown wrote:
> On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
> > Avoid compile warning if !ACPI_BLACKLIST_YEAR
> >
> > CC drivers/acpi/blacklist.o
> > drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
>
> How were you able to produce a .config with CONFIG_ACPI_BLACKLIST_YEAR not defined?
> Can you send it to me?
'make randconfig' does that kind of thing. It doesn't enforce/follow
"select" clauses.
> thanks,
> -Len
>
> > Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
> > ---
> > drivers/acpi/blacklist.c | 2 +-
> > 1 files changed, 1 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
> > index 3ec110c..ac96c47 100644
> > --- a/drivers/acpi/blacklist.c
> > +++ b/drivers/acpi/blacklist.c
> > @@ -73,7 +73,7 @@ static struct acpi_blacklist_item acpi_blacklist[] __initdata = {
> > {""}
> > };
> >
> > -#if CONFIG_ACPI_BLACKLIST_YEAR
> > +#if defined(CONFIG_ACPI_BLACKLIST_YEAR) && CONFIG_ACPI_BLACKLIST_YEAR
> >
> > static int __init blacklist_by_year(void)
> > {
> -
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 3:49 ` Randy Dunlap
@ 2007-06-20 3:51 ` Randy Dunlap
2007-06-20 4:41 ` Len Brown
2007-06-20 9:31 ` Andreas Herrmann
0 siblings, 2 replies; 15+ messages in thread
From: Randy Dunlap @ 2007-06-20 3:51 UTC (permalink / raw)
To: lkml; +Cc: Len Brown, Andreas Herrmann, linux-acpi
On Tue, 19 Jun 2007 20:49:34 -0700 Randy Dunlap wrote:
> On Tue, 19 Jun 2007 23:38:02 -0400 Len Brown wrote:
>
> > On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
> > > Avoid compile warning if !ACPI_BLACKLIST_YEAR
> > >
> > > CC drivers/acpi/blacklist.o
> > > drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
> >
> > How were you able to produce a .config with CONFIG_ACPI_BLACKLIST_YEAR not defined?
> > Can you send it to me?
>
> 'make randconfig' does that kind of thing. It doesn't enforce/follow
> "select" clauses.
I should have also said: randconfig is good for detecting some
missing conditions/configs or missing header files, but if you find one
that is just plain Invalid (like some of these), just say so
and do whatever you want with the patch (IMHO of course).
> > thanks,
> > -Len
> >
> > > Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
> > > ---
> > > drivers/acpi/blacklist.c | 2 +-
> > > 1 files changed, 1 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
> > > index 3ec110c..ac96c47 100644
> > > --- a/drivers/acpi/blacklist.c
> > > +++ b/drivers/acpi/blacklist.c
> > > @@ -73,7 +73,7 @@ static struct acpi_blacklist_item acpi_blacklist[] __initdata = {
> > > {""}
> > > };
> > >
> > > -#if CONFIG_ACPI_BLACKLIST_YEAR
> > > +#if defined(CONFIG_ACPI_BLACKLIST_YEAR) && CONFIG_ACPI_BLACKLIST_YEAR
> > >
> > > static int __init blacklist_by_year(void)
> > > {
> > -
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 3:51 ` Randy Dunlap
@ 2007-06-20 4:41 ` Len Brown
2007-06-20 9:31 ` Andreas Herrmann
1 sibling, 0 replies; 15+ messages in thread
From: Len Brown @ 2007-06-20 4:41 UTC (permalink / raw)
To: Randy Dunlap; +Cc: lkml, Andreas Herrmann, linux-acpi
On Tuesday 19 June 2007 23:51, Randy Dunlap wrote:
> On Tue, 19 Jun 2007 20:49:34 -0700 Randy Dunlap wrote:
>
> > On Tue, 19 Jun 2007 23:38:02 -0400 Len Brown wrote:
> >
> > > On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
> > > > Avoid compile warning if !ACPI_BLACKLIST_YEAR
> > > >
> > > > CC drivers/acpi/blacklist.o
> > > > drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
> > >
> > > How were you able to produce a .config with CONFIG_ACPI_BLACKLIST_YEAR not defined?
> > > Can you send it to me?
> >
> > 'make randconfig' does that kind of thing. It doesn't enforce/follow
> > "select" clauses.
>
> I should have also said: randconfig is good for detecting some
> missing conditions/configs or missing header files, but if you find one
> that is just plain Invalid (like some of these), just say so
> and do whatever you want with the patch (IMHO of course).
If randconfig ends up with impossible-for-a-user-to-generate configs,
then it seems seriously broken. Perhaps it would make sense to run
"make oldconfig" after "make randconfig" -- or better yet, have that
built in?
-Len
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 3:38 ` Len Brown
2007-06-20 3:49 ` Randy Dunlap
@ 2007-06-20 8:49 ` Andreas Herrmann
2007-06-20 13:36 ` Len Brown
1 sibling, 1 reply; 15+ messages in thread
From: Andreas Herrmann @ 2007-06-20 8:49 UTC (permalink / raw)
To: Len Brown; +Cc: linux-kernel, linux-acpi
[-- Attachment #1: Type: text/plain, Size: 1659 bytes --]
On Tue, Jun 19, 2007 at 11:38:02PM -0400, Len Brown wrote:
> On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
> > Avoid compile warning if !ACPI_BLACKLIST_YEAR
> >
> > CC drivers/acpi/blacklist.o
> > drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
>
> How were you able to produce a .config with CONFIG_ACPI_BLACKLIST_YEAR not defined?
Initially I used randconfig. But you can easily create it using
"make menuconfig", too.
Just do "make mrproper && make menuconfig" and now
deselect CONFIG_PM. On x86_64 ACPI keeps enabled by default.
Now additionally activate an assorted choice of laptop misc devices,
like MSI_LAPTOP, THINKPAD_ACPI etc, and you get:
...
drivers/misc/sony-laptop.c:1458: undefined reference to `ec_read'
drivers/built-in.o: In function `acpi_ec_read':
drivers/misc/thinkpad_acpi.c:247: undefined reference to `ec_read'
drivers/built-in.o: In function `acpi_ec_write':
drivers/misc/thinkpad_acpi.c:260: undefined reference to `ec_write'
drivers/built-in.o: In function `led_write':
drivers/misc/thinkpad_acpi.c:2209: undefined reference to `ec_write'
...
drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defi
ned
...
drivers/acpi/bus.c: In function 'acpi_bus_get_power':
drivers/acpi/bus.c:162: warning: implicit declaration of function 'acpi_power_get_inferred_state'
...
In short, it is possible for a user to create such a configuration.
The current kconfig for acpi and those misc devices does not prevent
it.
> Can you send it to me?
>
Attached is a configuration that I've just created with menuconfig and
not randconfig.
Regards,
Andreas
[-- Attachment #2: acpi-kconfig-issues.conf --]
[-- Type: text/plain, Size: 36622 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22-rc5
# Wed Jun 20 10:17:48 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_ACPI=y
CONFIG_ACPI_NUMA=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_SONY_LAPTOP=y
# CONFIG_SONYPI_COMPAT is not set
CONFIG_THINKPAD_ACPI=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_DOCK is not set
CONFIG_THINKPAD_ACPI_BAY=y
# CONFIG_BLINK is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 3:51 ` Randy Dunlap
2007-06-20 4:41 ` Len Brown
@ 2007-06-20 9:31 ` Andreas Herrmann
2007-06-20 14:28 ` Randy Dunlap
1 sibling, 1 reply; 15+ messages in thread
From: Andreas Herrmann @ 2007-06-20 9:31 UTC (permalink / raw)
To: Randy Dunlap; +Cc: lkml, Len Brown, linux-acpi
On Tue, Jun 19, 2007 at 08:51:58PM -0700, Randy Dunlap wrote:
> On Tue, 19 Jun 2007 20:49:34 -0700 Randy Dunlap wrote:
>
> > On Tue, 19 Jun 2007 23:38:02 -0400 Len Brown wrote:
> >
> > > On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
> > > > Avoid compile warning if !ACPI_BLACKLIST_YEAR
> > > >
> > > > CC drivers/acpi/blacklist.o
> > > > drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
> > >
> > > How were you able to produce a .config with CONFIG_ACPI_BLACKLIST_YEAR not defined?
> > > Can you send it to me?
> >
> > 'make randconfig' does that kind of thing. It doesn't enforce/follow
> > "select" clauses.
>
> I should have also said: randconfig is good for detecting some
> missing conditions/configs or missing header files, but if you find one
> that is just plain Invalid (like some of these), just say so
> and do whatever you want with the patch (IMHO of course).
I think of randconfig as
"make config with random answers to all questions"
(Or did I miss something?)
This means that randconfig does not give totally random
configurations. The same restrictions apply for config,
randconfig and menuconfig. If not we might consider fixing
scripts/kconfig/conf.c and friends.
So in general a "randconfig" configurations can be generated by a user
as well. He just has to give the same answers during "make config"
as randconfig did.
I started this randconfig thing yesterday and up to now I have looked
at 16 (out of >66) configs which lead to kernel build errors with
the current git tree.
Of course I have seen duplicates of the problems reported.
But there were just 3 (all equal) bogus configurations. There randconfig
did not provide a proper file name for CONFIG_ACPI_CUSTOM_DSDT_FILE.
This is the only case for which I would use the term "user error" or
"bogus randconfig".
IMHO if certain configurations are invalid we should use kconfig-language
to prevent them.
Ah and wrt to the above compile warning. Normally I would have ignored
it - but I looked at acpi code and its Kconfig anyway.
And It's easy to avoid such a warning to keep the terminal clear
for more interesting compile messages ;-)
Regards,
Andreas
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 8:49 ` Andreas Herrmann
@ 2007-06-20 13:36 ` Len Brown
2007-06-20 13:46 ` Andi Kleen
2007-06-20 18:25 ` Ravikiran G Thirumalai
0 siblings, 2 replies; 15+ messages in thread
From: Len Brown @ 2007-06-20 13:36 UTC (permalink / raw)
To: Andreas Herrmann, Steven Whitehouse, Andi Kleen, Shai Fultheim,
Ravikiran Thirumalai
Cc: linux-kernel, linux-acpi
On Wednesday 20 June 2007 04:49, Andreas Herrmann wrote:
> On Tue, Jun 19, 2007 at 11:38:02PM -0400, Len Brown wrote:
> > On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
> > > Avoid compile warning if !ACPI_BLACKLIST_YEAR
> > >
> > > CC drivers/acpi/blacklist.o
> > > drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
> >
> > How were you able to produce a .config with CONFIG_ACPI_BLACKLIST_YEAR not defined?
>
> Initially I used randconfig. But you can easily create it using
> "make menuconfig", too.
>
> Just do "make mrproper && make menuconfig" and now
> deselect CONFIG_PM. On x86_64 ACPI keeps enabled by default.
As CONFIG_ACPI depends on CONFIG_PM, then if you are able to end up
with a config having ACPI && !PM, then the Kconfig system is broken.
The brokeness is x86_64 specific, and results from the "select ACPI" below.
Please test if this single patch fixes all your multiple ACPI related build errors.
I fear, however, that this patch defeats the purpose of
b0bd35e622ffbda2c01dc67a0381c6a18817a29a -- which was to make selecting
NUMA more user-friendly. So it might make more sense to simply revert that
patch entirely.
The underlying problem is that Kconfig doesn't support using select
on targets which themselves have dependencies.
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 5ce9443..e9d7767 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -364,9 +364,9 @@ config NODES_SHIFT
config X86_64_ACPI_NUMA
bool "ACPI NUMA detection"
depends on NUMA
- select ACPI
+ depends on ACPI
select PCI
- select ACPI_NUMA
+ depends on ACPI_NUMA
default y
help
Enable ACPI SRAT based node topology detection.
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 13:36 ` Len Brown
@ 2007-06-20 13:46 ` Andi Kleen
2007-06-20 18:25 ` Ravikiran G Thirumalai
1 sibling, 0 replies; 15+ messages in thread
From: Andi Kleen @ 2007-06-20 13:46 UTC (permalink / raw)
To: Len Brown
Cc: Andreas Herrmann, Steven Whitehouse, Shai Fultheim,
Ravikiran Thirumalai, linux-kernel, linux-acpi
> The underlying problem is that Kconfig doesn't support using select
> on targets which themselves have dependencies.
>
> Signed-off-by: Len Brown <len.brown@intel.com>
The depends on ACPI is fine by me, but I would prefer if the
ACPI_NUMA dependency worked the other way round (APCI_NUMA default y
and depends on the relevant architecture specific symbols). That would
be more user friendly I think because all the NUMA options would
be in one place.
-Andi
> diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
> index 5ce9443..e9d7767 100644
> --- a/arch/x86_64/Kconfig
> +++ b/arch/x86_64/Kconfig
> @@ -364,9 +364,9 @@ config NODES_SHIFT
> config X86_64_ACPI_NUMA
> bool "ACPI NUMA detection"
> depends on NUMA
> - select ACPI
> + depends on ACPI
> select PCI
> - select ACPI_NUMA
> + depends on ACPI_NUMA
> default y
> help
> Enable ACPI SRAT based node topology detection.
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 9:31 ` Andreas Herrmann
@ 2007-06-20 14:28 ` Randy Dunlap
0 siblings, 0 replies; 15+ messages in thread
From: Randy Dunlap @ 2007-06-20 14:28 UTC (permalink / raw)
To: Andreas Herrmann; +Cc: lkml, Len Brown, linux-acpi
Andreas Herrmann wrote:
> On Tue, Jun 19, 2007 at 08:51:58PM -0700, Randy Dunlap wrote:
>> On Tue, 19 Jun 2007 20:49:34 -0700 Randy Dunlap wrote:
>>
>>> On Tue, 19 Jun 2007 23:38:02 -0400 Len Brown wrote:
>>>
>>>> On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
>>>>> Avoid compile warning if !ACPI_BLACKLIST_YEAR
>>>>>
>>>>> CC drivers/acpi/blacklist.o
>>>>> drivers/acpi/blacklist.c:76:5: warning: "CONFIG_ACPI_BLACKLIST_YEAR" is not defined
>>>> How were you able to produce a .config with CONFIG_ACPI_BLACKLIST_YEAR not defined?
>>>> Can you send it to me?
>>> 'make randconfig' does that kind of thing. It doesn't enforce/follow
>>> "select" clauses.
>> I should have also said: randconfig is good for detecting some
>> missing conditions/configs or missing header files, but if you find one
>> that is just plain Invalid (like some of these), just say so
>> and do whatever you want with the patch (IMHO of course).
>
>
> I think of randconfig as
>
> "make config with random answers to all questions"
>
> (Or did I miss something?)
> This means that randconfig does not give totally random
> configurations. The same restrictions apply for config,
> randconfig and menuconfig. If not we might consider fixing
> scripts/kconfig/conf.c and friends.
The last time that I looked at the config code, randconfig generates
a random value for config symbols, taking "depends on" into account,
but it does not take "select" into account. Or put another way,
it does not follow "select" chains.
and IIRC, running "make oldconfig" after that still won't enforce
the "select"s. This is a long-running problem and one of the problems
with using "select" at all.
> So in general a "randconfig" configurations can be generated by a user
> as well. He just has to give the same answers during "make config"
> as randconfig did.
>
> I started this randconfig thing yesterday and up to now I have looked
> at 16 (out of >66) configs which lead to kernel build errors with
> the current git tree.
> Of course I have seen duplicates of the problems reported.
> But there were just 3 (all equal) bogus configurations. There randconfig
> did not provide a proper file name for CONFIG_ACPI_CUSTOM_DSDT_FILE.
> This is the only case for which I would use the term "user error" or
> "bogus randconfig".
>
> IMHO if certain configurations are invalid we should use kconfig-language
> to prevent them.
>
>
> Ah and wrt to the above compile warning. Normally I would have ignored
> it - but I looked at acpi code and its Kconfig anyway.
> And It's easy to avoid such a warning to keep the terminal clear
> for more interesting compile messages ;-)
>
>
>
> Regards,
>
> Andreas
--
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 13:36 ` Len Brown
2007-06-20 13:46 ` Andi Kleen
@ 2007-06-20 18:25 ` Ravikiran G Thirumalai
2007-06-21 18:36 ` Andreas Herrmann
2007-06-23 3:55 ` Andrew Morton
1 sibling, 2 replies; 15+ messages in thread
From: Ravikiran G Thirumalai @ 2007-06-20 18:25 UTC (permalink / raw)
To: Len Brown
Cc: Andreas Herrmann, Steven Whitehouse, Andi Kleen, Shai Fultheim,
linux-kernel, linux-acpi
On Wed, Jun 20, 2007 at 09:36:30AM -0400, Len Brown wrote:
> On Wednesday 20 June 2007 04:49, Andreas Herrmann wrote:
> > On Tue, Jun 19, 2007 at 11:38:02PM -0400, Len Brown wrote:
> > > On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
>
> I fear, however, that this patch defeats the purpose of
> b0bd35e622ffbda2c01dc67a0381c6a18817a29a -- which was to make selecting
> NUMA more user-friendly. So it might make more sense to simply revert that
> patch entirely.
>
> The underlying problem is that Kconfig doesn't support using select
> on targets which themselves have dependencies.
>
> Signed-off-by: Len Brown <len.brown@intel.com>
>
>
> diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
> index 5ce9443..e9d7767 100644
> --- a/arch/x86_64/Kconfig
> +++ b/arch/x86_64/Kconfig
> @@ -364,9 +364,9 @@ config NODES_SHIFT
> config X86_64_ACPI_NUMA
> bool "ACPI NUMA detection"
> depends on NUMA
> - select ACPI
> + depends on ACPI
> select PCI
> - select ACPI_NUMA
> + depends on ACPI_NUMA
> default y
> help
> Enable ACPI SRAT based node topology detection.
> -
arch/x86_64/Kconfig:706:error: found recursive dependency: PCI -> ACPI ->
X86_64_ACPI_NUMA -> PCI
-> USB_ARCH_HAS_OHCI -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB ->
USB_SISUSBVGAmake[1]: *** [menuconfig] Error 1
I guess we have to change PCI to 'depends on' as well.
Else, select PM?
I am OK with either approach.
Thanks,
Kiran
Paper over 'select' inadequacies.
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Index: linux-2.6.22-rc5/arch/x86_64/Kconfig
===================================================================
--- linux-2.6.22-rc5.orig/arch/x86_64/Kconfig 2007-06-18 16:02:19.571323415 -0700
+++ linux-2.6.22-rc5/arch/x86_64/Kconfig 2007-06-20 11:34:29.845354250 -0700
@@ -366,6 +366,7 @@ config X86_64_ACPI_NUMA
depends on NUMA
select ACPI
select PCI
+ select PM
select ACPI_NUMA
default y
help
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 18:25 ` Ravikiran G Thirumalai
@ 2007-06-21 18:36 ` Andreas Herrmann
2007-06-22 14:39 ` Andreas Herrmann
2007-06-23 3:55 ` Andrew Morton
1 sibling, 1 reply; 15+ messages in thread
From: Andreas Herrmann @ 2007-06-21 18:36 UTC (permalink / raw)
To: Ravikiran G Thirumalai
Cc: Len Brown, Steven Whitehouse, Andi Kleen, Shai Fultheim,
linux-kernel, linux-acpi
On Wed, Jun 20, 2007 at 11:25:48AM -0700, Ravikiran G Thirumalai wrote:
> On Wed, Jun 20, 2007 at 09:36:30AM -0400, Len Brown wrote:
> > On Wednesday 20 June 2007 04:49, Andreas Herrmann wrote:
> > > On Tue, Jun 19, 2007 at 11:38:02PM -0400, Len Brown wrote:
> > > > On Tuesday 19 June 2007 18:50, Andreas Herrmann wrote:
> >
> > I fear, however, that this patch defeats the purpose of
> > b0bd35e622ffbda2c01dc67a0381c6a18817a29a -- which was to make selecting
> > NUMA more user-friendly. So it might make more sense to simply revert that
> > patch entirely.
> >
> > The underlying problem is that Kconfig doesn't support using select
> > on targets which themselves have dependencies.
> >
> > Signed-off-by: Len Brown <len.brown@intel.com>
> >
> >
> > diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
> > index 5ce9443..e9d7767 100644
> > --- a/arch/x86_64/Kconfig
> > +++ b/arch/x86_64/Kconfig
> > @@ -364,9 +364,9 @@ config NODES_SHIFT
> > config X86_64_ACPI_NUMA
> > bool "ACPI NUMA detection"
> > depends on NUMA
> > - select ACPI
> > + depends on ACPI
> > select PCI
> > - select ACPI_NUMA
> > + depends on ACPI_NUMA
> > default y
> > help
> > Enable ACPI SRAT based node topology detection.
> > -
>
> arch/x86_64/Kconfig:706:error: found recursive dependency: PCI -> ACPI ->
> X86_64_ACPI_NUMA -> PCI
> -> USB_ARCH_HAS_OHCI -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB ->
> USB_SISUSBVGAmake[1]: *** [menuconfig] Error 1
>
> I guess we have to change PCI to 'depends on' as well.
> Else, select PM?
>
> I am OK with either approach.
>
> Thanks,
> Kiran
>
> Paper over 'select' inadequacies.
>
> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
>
> Index: linux-2.6.22-rc5/arch/x86_64/Kconfig
> ===================================================================
> --- linux-2.6.22-rc5.orig/arch/x86_64/Kconfig 2007-06-18 16:02:19.571323415 -0700
> +++ linux-2.6.22-rc5/arch/x86_64/Kconfig 2007-06-20 11:34:29.845354250 -0700
> @@ -366,6 +366,7 @@ config X86_64_ACPI_NUMA
> depends on NUMA
> select ACPI
> select PCI
> + select PM
> select ACPI_NUMA
> default y
> help
Yep, this one-liner solves all acpi related compile errors/warnings
that I've reported.
Additional it resolves anoter problem that results from
dependencies between CONFIG_PNP and CONFIG_ACPI.
One problem arises:
If PM is deselected, the PNP menu is empty on x86_64.
So I suggest to add the attached patch to hide the PNP-menu
if no PM (and thus ACPI) is selected.
Regards,
Andreas
--
Make CONFIG_PNP a menuconfig to hide the submenu if neither
ISA nor ACPI is selected.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
diff --git a/drivers/pnp/Kconfig b/drivers/pnp/Kconfig
index 1959cef..2291e7d 100644
--- a/drivers/pnp/Kconfig
+++ b/drivers/pnp/Kconfig
@@ -2,11 +2,9 @@
# Plug and Play configuration
#
-menu "Plug and Play support"
- depends on HAS_IOMEM
-
-config PNP
+menuconfig PNP
bool "Plug and Play support"
+ depends on HAS_IOMEM
depends on ISA || ACPI
---help---
Plug and Play (PnP) is a standard for peripherals which allows those
@@ -22,15 +20,15 @@ config PNP
If unsure, say Y.
+if PNP
+
config PNP_DEBUG
bool "PnP Debug Messages"
- depends on PNP
help
Say Y if you want the Plug and Play Layer to print debug messages.
This is useful if you are developing a PnP driver or troubleshooting.
comment "Protocols"
- depends on PNP
source "drivers/pnp/isapnp/Kconfig"
@@ -38,5 +36,4 @@ source "drivers/pnp/pnpbios/Kconfig"
source "drivers/pnp/pnpacpi/Kconfig"
-endmenu
-
+endif
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-21 18:36 ` Andreas Herrmann
@ 2007-06-22 14:39 ` Andreas Herrmann
0 siblings, 0 replies; 15+ messages in thread
From: Andreas Herrmann @ 2007-06-22 14:39 UTC (permalink / raw)
To: Ravikiran G Thirumalai, Andi Kleen
Cc: Len Brown, Steven Whitehouse, Shai Fultheim, linux-kernel, linux-acpi
On Thu, Jun 21, 2007 at 08:36:15PM +0200, Andreas Herrmann wrote:
> On Wed, Jun 20, 2007 at 11:25:48AM -0700, Ravikiran G Thirumalai wrote:
> > On Wed, Jun 20, 2007 at 09:36:30AM -0400, Len Brown wrote:
> > >
<snip>
> > > The underlying problem is that Kconfig doesn't support using select
> > > on targets which themselves have dependencies.
> > >
> > > Signed-off-by: Len Brown <len.brown@intel.com>
> > >
> > >
> > > diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
> > > index 5ce9443..e9d7767 100644
> > > --- a/arch/x86_64/Kconfig
> > > +++ b/arch/x86_64/Kconfig
> > > @@ -364,9 +364,9 @@ config NODES_SHIFT
> > > config X86_64_ACPI_NUMA
> > > bool "ACPI NUMA detection"
> > > depends on NUMA
> > > - select ACPI
> > > + depends on ACPI
> > > select PCI
> > > - select ACPI_NUMA
> > > + depends on ACPI_NUMA
> > > default y
> > > help
> > > Enable ACPI SRAT based node topology detection.
> > > -
> >
<snip>
> >
> >
> > Paper over 'select' inadequacies.
> >
> > Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
> >
> > Index: linux-2.6.22-rc5/arch/x86_64/Kconfig
> > ===================================================================
> > --- linux-2.6.22-rc5.orig/arch/x86_64/Kconfig 2007-06-18 16:02:19.571323415 -0700
> > +++ linux-2.6.22-rc5/arch/x86_64/Kconfig 2007-06-20 11:34:29.845354250 -0700
> > @@ -366,6 +366,7 @@ config X86_64_ACPI_NUMA
> > depends on NUMA
> > select ACPI
> > select PCI
> > + select PM
> > select ACPI_NUMA
> > default y
> > help
>
> Yep, this one-liner solves all acpi related compile errors/warnings
> that I've reported.
>
> Additional it resolves anoter problem that results from
> dependencies between CONFIG_PNP and CONFIG_ACPI.
>
Andi,
are you going to apply Ravikiran's patch?
Regards,
Andreas
--
Operating | AMD Saxony Limited Liability Company & Co. KG,
System | Wilschdorfer Landstr. 101, 01109 Dresden, Germany
Research | Register Court Dresden: HRA 4896, General Partner authorized
Center | to represent: AMD Saxony LLC (Wilmington, Delaware, US)
(OSRC) | General Manager of AMD Saxony LLC: Dr. Hans-R. Deppe, Thomas McCoy
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-20 18:25 ` Ravikiran G Thirumalai
2007-06-21 18:36 ` Andreas Herrmann
@ 2007-06-23 3:55 ` Andrew Morton
2007-06-23 4:28 ` Randy Dunlap
1 sibling, 1 reply; 15+ messages in thread
From: Andrew Morton @ 2007-06-23 3:55 UTC (permalink / raw)
To: Ravikiran G Thirumalai
Cc: lenb, andreas.herrmann3, swhiteho, ak, shai, linux-kernel, linux-acpi
> On Wed, 20 Jun 2007 11:25:48 -0700 Ravikiran G Thirumalai <kiran@scalex86.org> wrote:
> Paper over 'select' inadequacies.
>
> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
>
> Index: linux-2.6.22-rc5/arch/x86_64/Kconfig
> ===================================================================
> --- linux-2.6.22-rc5.orig/arch/x86_64/Kconfig 2007-06-18 16:02:19.571323415 -0700
> +++ linux-2.6.22-rc5/arch/x86_64/Kconfig 2007-06-20 11:34:29.845354250 -0700
> @@ -366,6 +366,7 @@ config X86_64_ACPI_NUMA
> depends on NUMA
> select ACPI
> select PCI
> + select PM
> select ACPI_NUMA
> default y
> help
argh. (and not just argh-at-your-email-client).
I went through some hair-tearing a few months ago working out why it is so
damn hard to make CONFIG_PM go away and then I fixed it. And now you're
proposing a change which would reinstate the obnoxious old behaviour.
Is the "bug" which you're "fixing" here caused by the randconfig
inadequacies? Because randconfig is just busted and simply should auto-run
oldconfig.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/12] acpi: fix another compile warning
2007-06-23 3:55 ` Andrew Morton
@ 2007-06-23 4:28 ` Randy Dunlap
0 siblings, 0 replies; 15+ messages in thread
From: Randy Dunlap @ 2007-06-23 4:28 UTC (permalink / raw)
To: Andrew Morton, zippel
Cc: Ravikiran G Thirumalai, lenb, andreas.herrmann3, swhiteho, ak,
shai, linux-kernel, linux-acpi
On Fri, 22 Jun 2007 20:55:30 -0700 Andrew Morton wrote:
> > On Wed, 20 Jun 2007 11:25:48 -0700 Ravikiran G Thirumalai <kiran@scalex86.org> wrote:
> > Paper over 'select' inadequacies.
> >
> > Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
> >
> > Index: linux-2.6.22-rc5/arch/x86_64/Kconfig
> > ===================================================================
> > --- linux-2.6.22-rc5.orig/arch/x86_64/Kconfig 2007-06-18 16:02:19.571323415 -0700
> > +++ linux-2.6.22-rc5/arch/x86_64/Kconfig 2007-06-20 11:34:29.845354250 -0700
> > @@ -366,6 +366,7 @@ config X86_64_ACPI_NUMA
> > depends on NUMA
> > select ACPI
> > select PCI
> > + select PM
> > select ACPI_NUMA
> > default y
> > help
>
> argh. (and not just argh-at-your-email-client).
>
> I went through some hair-tearing a few months ago working out why it is so
> damn hard to make CONFIG_PM go away and then I fixed it. And now you're
> proposing a change which would reinstate the obnoxious old behaviour.
>
> Is the "bug" which you're "fixing" here caused by the randconfig
> inadequacies? Because randconfig is just busted and simply should auto-run
> oldconfig.
Running oldconfig won't fix randconfigs that have busted "select"
chains (i.e., select does not follow chains like "depends on" does).
However, lots of this bustage isn't due to randconfig at all.
It's due to Jan E.'s menuconfig changes (yes, which I supported).
It seems that Jan didn't realize that a transition of a tristate symbol
to a boolean converts y or m to y (and n to n) and all (?) of the new
menuconfig symbols that control whether a menu is displayed or not
are boolean. One simple "fix" (or workaround) is to make them
tristate. Now that seems a little odd for a symbol that just controls
whether a menu is displayed or not, so Satyam Sharma has made some
other suggestions, and of course Andreas Herrmann has produced lots
of patches to fix various issues that he has run into.
I can't tell you the final answer (I proposed the tristate fix).
I don't particularly like some of the patches that change
depends on XYZ
to
depends on XYZ && ksymbol
in many lines of kconfig entries.
Not that it answers your question, but we should have hit this
in -mm, not in mainline, but it appears that our testing was a bit
insufficient.
And of course, if someone would fix kconfig to follow "select" chains,
we should bestow an award on them. :)
(however, I don't know if Roman would merge that patch)
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2007-06-23 4:29 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-06-19 22:50 [PATCH 7/12] acpi: fix another compile warning Andreas Herrmann
2007-06-20 3:38 ` Len Brown
2007-06-20 3:49 ` Randy Dunlap
2007-06-20 3:51 ` Randy Dunlap
2007-06-20 4:41 ` Len Brown
2007-06-20 9:31 ` Andreas Herrmann
2007-06-20 14:28 ` Randy Dunlap
2007-06-20 8:49 ` Andreas Herrmann
2007-06-20 13:36 ` Len Brown
2007-06-20 13:46 ` Andi Kleen
2007-06-20 18:25 ` Ravikiran G Thirumalai
2007-06-21 18:36 ` Andreas Herrmann
2007-06-22 14:39 ` Andreas Herrmann
2007-06-23 3:55 ` Andrew Morton
2007-06-23 4:28 ` Randy Dunlap
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).