* Re: sata_promise disk error 2.6.22-rc5 with hrt1 patch
@ 2007-06-24 21:30 Mikael Pettersson
2007-07-07 6:28 ` Dan Merillat
0 siblings, 1 reply; 3+ messages in thread
From: Mikael Pettersson @ 2007-06-24 21:30 UTC (permalink / raw)
To: gf435, linux-kernel; +Cc: linux-ide
(cc: linux-ide added)
On Sun, 24 Jun 2007 20:49:05 +0200, otto Meier wrote:
> I got the following in my logs:
>
> Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
> 0x0 action 0x0
> Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000)
> Jun 24 19:06:40 gate2 kernel: ata4.00: cmd
> 35/00:00:c1:17:92/00:04:17:00:00/e0 tag 0 cdb 0x0 data 524288 out
> Jun 24 19:06:40 gate2 kernel: res
> 50/00:00:c0:1b:92/00:00:17:00:00/e0 Emask 0x20 (host bus error)
> Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
> 488397168, hpa_sectors = 488397168
> Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
> 488397168, hpa_sectors = 488397168
> Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133
> Jun 24 19:06:40 gate2 kernel: ata4: EH complete
> Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte
> hardware sectors (250059 MB)
> Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
> 0x0 action 0x0
> Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000)
> Jun 24 19:06:40 gate2 kernel: ata4.00: cmd
> 25/00:00:c1:15:92/00:02:17:00:00/e0 tag 0 cdb 0x0 data 262144 in
> Jun 24 19:06:40 gate2 kernel: res
> 50/00:00:c0:17:92/00:00:17:00:00/e0 Emask 0x20 (host bus error)
> Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
> 488397168, hpa_sectors = 488397168
> Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
> 488397168, hpa_sectors = 488397168
> Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133
> Jun 24 19:06:40 gate2 kernel: ata4: EH complete
> Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off
> Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
> read cache: enabled, doesn't support DPO or FUA
> Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte
> hardware sectors (250059 MB)
> Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off
> Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
> read cache: enabled, doesn't support DPO or FUA
>
> The system continued without seeing other effects.
>
> It is runnuning a 2.6.22-rc5 kernel with hrt1 patch.
> The drive ist part of a raid5 with 4 identical drives
>
> lspci -vvv gives:
>
> 02:06.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
> 300 TX4) (rev 02)
The 300 TX4 model is causing transient errors for several people,
and we don't yet know why. In your case, port_status 0x00001000
means that "host bus is busy more than 256 clock cycles for every
ATA I/O transfer" (quoting the docs). Basically it's a timeout.
As long as it's transient, don't worry.
You may want to try without hrt1 to see if hrt1 is causing the issue.
/Mikael
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: sata_promise disk error 2.6.22-rc5 with hrt1 patch
2007-06-24 21:30 sata_promise disk error 2.6.22-rc5 with hrt1 patch Mikael Pettersson
@ 2007-07-07 6:28 ` Dan Merillat
0 siblings, 0 replies; 3+ messages in thread
From: Dan Merillat @ 2007-07-07 6:28 UTC (permalink / raw)
To: Mikael Pettersson; +Cc: gf435, linux-kernel, linux-ide
On 6/24/07, Mikael Pettersson <mikpe@it.uu.se> wrote:
> (cc: linux-ide added)
>
> The 300 TX4 model is causing transient errors for several people,
> and we don't yet know why. In your case, port_status 0x00001000
> means that "host bus is busy more than 256 clock cycles for every
> ATA I/O transfer" (quoting the docs). Basically it's a timeout.
I'm running vanilla 2.6.22-rc7 here, getting a similar error.
[ 741.010863] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 741.010869] ata2.00: (port_status 0x20080000)
[ 741.010875] ata2.00: cmd c8/00:08:bf:01:0c/00:00:00:00:00/ef tag 0
cdb 0x0 data 4096 in
[ 741.010877] res 50/00:00:c6:01:0c/00:00:00:00:00/ef Emask
0x2 (HSM violation)
[ 741.313131] ata2: soft resetting port
[ 741.463831] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 741.587208] ata2: EH complete
[ 741.640472] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors
(750156 MB)
[ 741.644141] sd 1:0:0:0: [sdb] Write Protect is off
[ 741.644144] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 741.670736] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
Identical card to the one otto posted. How common is this? I
wouldn't notice if it wasn't logged - I don't notice the blip in disk
access.
^ permalink raw reply [flat|nested] 3+ messages in thread
* sata_promise disk error 2.6.22-rc5 with hrt1 patch
@ 2007-06-24 18:49 otto Meier
0 siblings, 0 replies; 3+ messages in thread
From: otto Meier @ 2007-06-24 18:49 UTC (permalink / raw)
To: linux-kernel
Hello,
I got the following in my logs:
Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x0
Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000)
Jun 24 19:06:40 gate2 kernel: ata4.00: cmd
35/00:00:c1:17:92/00:04:17:00:00/e0 tag 0 cdb 0x0 data 524288 out
Jun 24 19:06:40 gate2 kernel: res
50/00:00:c0:1b:92/00:00:17:00:00/e0 Emask 0x20 (host bus error)
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133
Jun 24 19:06:40 gate2 kernel: ata4: EH complete
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte
hardware sectors (250059 MB)
Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x0
Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000)
Jun 24 19:06:40 gate2 kernel: ata4.00: cmd
25/00:00:c1:15:92/00:02:17:00:00/e0 tag 0 cdb 0x0 data 262144 in
Jun 24 19:06:40 gate2 kernel: res
50/00:00:c0:17:92/00:00:17:00:00/e0 Emask 0x20 (host bus error)
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133
Jun 24 19:06:40 gate2 kernel: ata4: EH complete
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte
hardware sectors (250059 MB)
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
The system continued without seeing other effects.
It is runnuning a 2.6.22-rc5 kernel with hrt1 patch.
The drive ist part of a raid5 with 4 identical drives
lspci -vvv gives:
02:06.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
300 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at bc00 [size=128]
Region 2: I/O ports at b800 [size=256]
Region 3: Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdec0000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at fdda0000 [disabled] [size=32K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Has anyone an idea whats going on?
Best regards
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-07-07 6:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-06-24 21:30 sata_promise disk error 2.6.22-rc5 with hrt1 patch Mikael Pettersson
2007-07-07 6:28 ` Dan Merillat
-- strict thread matches above, loose matches on Subject: below --
2007-06-24 18:49 otto Meier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).