2.6.24-rc2: Reported regressions from 2.6.23 (updated)

2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Rafael J. Wysocki]

[Note: Due to git.kernel.org not responding I'm unable to check which fixes
have already been merged since the last report.]

This message contains a list of some regressions from 2.6.23 which have been
reported since 2.6.24-rc1 was released and for which there are no fixes in the
mainline that I know of.  If any of them have been fixed already, please let me
know.

If you know of any other unresolved regressions from 2.6.23, please let me know
either and I'll add them to the list.


Subject		: On 2.6.24-rc1-gc9927c2b BUG: unable to handle kernel paging request at virtual address 3d15b925
Submitter	: Giacomo Catenazzi <cate@cateee.net>
References	: http://lkml.org/lkml/2007/10/24/487
		  http://bugzilla.kernel.org/show_bug.cgi?id=9246
Handled-By	: 
Patch		: 


Subject		: Potential regression in -git15: can't resume stopped root shell?
Submitter	: Theodore Tso <tytso@mit.edu>
References	: http://lkml.org/lkml/2007/10/20/114
		  http://bugzilla.kernel.org/show_bug.cgi?id=9247
Handled-By	: Serge Hallyn <serue@us.ibm.com>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=13361&action=view
		  http://bugzilla.kernel.org/attachment.cgi?id=13375&action=view


Subject		: irq 21: nobody cared 2.6.24-rc1
Submitter	: Bongani Hlope <bonganilinux@mweb.co.za>
References	: http://lkml.org/lkml/2007/10/25/90
		  http://bugzilla.kernel.org/show_bug.cgi?id=9249
Handled-By	: 
Patch		: 


Subject		: [BUG] panic after umount (biscted)
Submitter	: Sebastian Siewior <lkml@ml.breakpoint.cc>
References	: http://marc.info/?l=linux-kernel&m=119338387030335&w=2
		  http://bugzilla.kernel.org/show_bug.cgi?id=9250
Handled-By	: Jens Axboe <jens.axboe@oracle.com>
Patch		: http://marc.info/?l=linux-kernel&m=119348520210349&w=2


Subject		: 2.6.24-rc1 sysctl table check failed on PowerMac
Submitter	: Mikael Pettersson <mikpe@it.uu.se>
References	: http://marc.info/?l=linux-kernel&m=119350802331857&w=2
		  http://bugzilla.kernel.org/show_bug.cgi?id=9251
Handled-By	: Alexey Dobriyan <adobriyan@gmail.com>
Patch		: http://marc.info/?l=linux-kernel&m=119351015801660&w=2


Subject		: 2.6.24-rc1: pata_acpi fails to activate DMA for DVD-ROM on ALi M5229 secondary channel
Submitter	: Andrey Borzenkov <arvidjaar@mail.ru>
References	: http://marc.info/?l=linux-kernel&m=119342005216716&w=2
		  http://bugzilla.kernel.org/show_bug.cgi?id=9252
Handled-By	: Alan Cox <alan@lxorguk.ukuu.org.uk>
Patch		: 
Note		: pata_acpi was not present in 2.6.23


Subject		: 2.6.24-rc1 freezes on powerbook at first boot stage
Submitter	: Elimar Riesebieter <riesebie@lxtec.de>
References	: http://lkml.org/lkml/2007/10/24/205
		  http://bugzilla.kernel.org/show_bug.cgi?id=9254
Handled-By	: 
Patch		: 


Subject		: build #286 failed for 2.6.24-rc1-gea45d15 in linux/arch/x86/kernel/setup_32.c
Submitter	: Toralf Förster <toralf.foerster@gmx.de>
References	: http://lkml.org/lkml/2007/10/28/110
		  http://bugzilla.kernel.org/show_bug.cgi?id=9256
Handled-By	: "H. Peter Anvin" <hpa@zytor.com>
Patch		: http://marc.info/?i=1193419828.3293.35.camel@localhost.localdomain


Subject		: 2.6.24-rc1 kills onboard r8169 (rtl8111b) NIC
Submitter	: "Sergey S. Kostyliov" <rathamahata@gmail.com>
References	: http://lkml.org/lkml/2007/10/28/144
		  http://bugzilla.kernel.org/show_bug.cgi?id=9257
Handled-By	: Francois Romieu <romieu@fr.zoreil.com>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=13441&action=view


Subject		: Commit "Hibernation: Enter platform hibernation state in a consistent way)" makes my system to resume instantly from S4
Submitter	: Maxim Levitsky <maximlevitsky@gmail.com>
References	: http://lkml.org/lkml/2007/10/27/66
		  http://bugzilla.kernel.org/show_bug.cgi?id=9258
Handled-By	: "Rafael J. Wysocki" <rjw@sisk.pl>
Patch		: 
Note		: $subject commit apparently exposes a problem that existed previously


Subject		: leds: ledtrig-timer calls sleeping function from invalid context
Submitter	: Márton Németh <nm127@freemail.hu>
References	: http://bugzilla.kernel.org/show_bug.cgi?id=9264
Handled-By	: 
Patch		: 


Subject		: Device mapper regression 2.6.23 vs. v2.6.23-6597-gcfa76f0
Submitter	: Thomas Meyer <thomas@m3y3r.de>
References	: http://lkml.org/lkml/2007/10/21/153
		  http://bugzilla.kernel.org/show_bug.cgi?id=9280
Handled-By	: 
Patch		: 


Subject		: [2.6.24-rc1][BUG] Oops on battery removal
Submitter	: Rolf Eike Beer <eike-kernel@sf-tec.de>
References	: http://lkml.org/lkml/2007/11/2/23
		  http://bugzilla.kernel.org/show_bug.cgi?id=9283
Handled-By	: Alexey Starikovskiy <astarikovskiy@suse.de>
Patch		: http://lkml.org/lkml/2007/11/2/71


Subject		: [2.6.24-rc1 regression] AC adapter state does not change after resume
Submitter	: Andrey Borzenkov <arvidjaar@mail.ru>
References	: http://lkml.org/lkml/2007/10/30/427
		  http://bugzilla.kernel.org/show_bug.cgi?id=9284
Handled-By	: Alexey Starikovskiy <astarikovskiy@suse.de>
Patch		: http://lkml.org/lkml/2007/10/31/44


Subject		: 2.6.24-rc1 eat my photo SD card :-(
Submitter	: Romano Giannetti <romanol@upcomillas.es>
References	: http://lkml.org/lkml/2007/11/1/99
		  http://bugzilla.kernel.org/show_bug.cgi?id=9286
Handled-By	: Nick Piggin <nickpiggin@yahoo.com.au>
		  Pierre Ossman <drzeus-mmc@drzeus.cx>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=13450&action=view


Subject		: 100% iowait on one of cpus in current -git
Submitter	: Maxim Levitsky <maximlevitsky@gmail.com>
		  Thomas Schwarzgruber <possebaer@gmx.at>
References	: http://lkml.org/lkml/2007/10/22/20
		  http://lkml.org/lkml/2007/10/31/212
		  http://bugzilla.kernel.org/show_bug.cgi?id=9289
Handled-By	: Fengguang Wu <wfg@mail.ustc.edu.cn>
Patch		: 


Subject		: pdflush stuck in D state with v2.6.24-rc1-192-gef49c32
Submitter	: Florin Iucha <florin@iucha.net>
References	: http://lkml.org/lkml/2007/10/28/65
		  http://bugzilla.kernel.org/show_bug.cgi?id=9291
Handled-By	: Trond Myklebust <trond.myklebust@fys.uio.no>
		  Fengguang Wu <wfg@mail.ustc.edu.cn>
Patch		: 


Subject		: [regression] v2.6.24-rc1-497-gb1d08ac: kde battery icon gone
Submitter	: Thomas Meyer <thomas@m3y3r.de>
References	: http://lkml.org/lkml/2007/11/2/165
		  http://bugzilla.kernel.org/show_bug.cgi?id=9297
Handled-By	: Andrey Borzenkov <arvidjaar@mail.ru>
		  Ingo Molnar <mingo@elte.hu>
Patch		: 
Note		: goes away if ACPI_PROCFS is set


Subject		: Regression: libata: implement ata_wait_after_reset()
Submitter	: Luca Tettamanti <kronos.it@gmail.com>
References	: http://lkml.org/lkml/2007/11/3/66
		  http://bugzilla.kernel.org/show_bug.cgi?id=9298
Handled-By	: Tejun Heo <htejun@gmail.com>
Patch		: http://bugzilla.kernel.org/attachment.cgi?id=13429&action=view


Subject		: 2.6.24-rc1-g74521c28: oops during boot [<ffffffff881c03e4>] :power_supply:power_supply_show_property+0x94/0x150
Submitter	: Thomas Bächler <thomas@archlinux.org>
References	: http://lkml.org/lkml/2007/11/3/35
		  http://bugzilla.kernel.org/show_bug.cgi?id=9299
Handled-By	:
Patch		: 


Subject		: Audigy 2 ZS Notebook prevents snd_emu10k1 module from loading/working
Submitter	: unggnu@googlemail.com
References	: http://bugzilla.kernel.org/show_bug.cgi?id=9304
Handled-By	: Takashi Iwai <tiwai@suse.de>
Patch		: 


Subject		: National characters are not displayed under console.
Submitter	: Konrad Rzepecki <hannibal@astral.lodz.pl>
References	: http://bugzilla.kernel.org/show_bug.cgi?id=9319
Handled-By	: 
Patch		: 


Subject		: PATA scan: ACPI Exception AE_AML_PACKAGE_LIMIT... is beyond end of object
Submitter	: Hans de Bruin <bruinjm@xs4all.nl>
References	: http://bugzilla.kernel.org/show_bug.cgi?id=9320
Handled-By	: Robert Moore <Robert.Moore@intel.com>
Patch		: 


Subject		: net: skge breakage on 2.6.24-rc1
Submitter	: Heikki Orsila <shdl@zakalwe.fi>
References	: http://lkml.org/lkml/2007/11/7/281
		  http://bugzilla.kernel.org/show_bug.cgi?id=9321
Handled-By	: 
Patch		: 


Subject		: 2.6.24-rc1: pata_amd fails to detect 80-pin wire
Submitter	: "Thomas Lindroth" <thomas.lindroth@gmail.com>
References	: http://lkml.org/lkml/2007/11/7/152
		  http://bugzilla.kernel.org/show_bug.cgi?id=9322
Handled-By	: 
Patch		: 


Subject		: 2.6.24-rc1 - Regularly getting processes stuck in D state on startup
Submitter	: David <david@unsolicited.net>
Confirmed-by	: Stephen Rothwell <sfr@canb.auug.org.au>
References	: http://lkml.org/lkml/2007/11/5/229
		  http://bugzilla.kernel.org/show_bug.cgi?id=9323
Handled-By	: Peter Zijlstra <peterz@infradead.org>
		  Fengguang Wu <wfg@mail.ustc.edu.cn>
Patch		: http://lkml.org/lkml/2007/11/6/33


Subject		: 2.6.24-rc2 breaks nVidia MCP51 High Definition Audio
Submitter	: Gerhard Mack <gmack@innerfire.net>
References	: http://lkml.org/lkml/2007/11/7/318
		  http://bugzilla.kernel.org/show_bug.cgi?id=9324
Handled-By	: Andrew Morton <akpm@linux-foundation.org>
Patch		: 


Subject		: 2.6.24-rc2 (esthetic?) regression: auto select interrupt bouncing
Submitter	: Romano Giannetti <romanol@upcomillas.es>
References	: http://bugzilla.kernel.org/show_bug.cgi?id=9327
Handled-By	: Alexey Starikovskiy <astarikovskiy@suse.de>
Patch		: 


Subject		: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
Submitter	: Roberto Oppedisano <roppedisano@infracomspa.it>
References	: http://lkml.org/lkml/2007/11/8/124
Handled-By	: Andrew Morton <akpm@linux-foundation.org>
		  Jeff Garzik <jeff@garzik.org>
		  Matthew Garrett <mjg59@srcf.ucam.org>
Patch		: http://lkml.org/lkml/2007/11/8/167


Subject		: snd_hda_intel 2.6.24-rc2 bug: interrupts don't always work on Lenovo X60s
Submitter	: Roland Dreier <rdreier@cisco.com>
References	: http://lkml.org/lkml/2007/11/8/255
		  http://bugzilla.kernel.org/show_bug.cgi?id=9332
Handled-By	: 
Patch		: 


Subject		: system hangs with blank screen after some time
Submitter	: Marcus Better <marcus@better.se>
References	: http://bugzilla.kernel.org/show_bug.cgi?id=9335
Handled-By	: Andrew Morton <akpm@linux-foundation.org>
Patch		: 


Subject		: iozone write 50% regression in kernel 2.6.24-rc1
Submitter	: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
References	: http://lkml.org/lkml/2007/11/9/28
		  http://bugzilla.kernel.org/show_bug.cgi?id=9340
Handled-By	: Peter Zijlstra <a.p.zijlstra@chello.nl>
		  Martin Knoblauch <knobi@knobisoft.de>
Patch		: 


Subject		: 2.6.24 regression:  hibernation hangs on "Suspending console" in low-battery condition
Submitter	: Andrey Borzenkov <arvidjaar@mail.ru>
References	: http://lkml.org/lkml/2007/11/11/28
		  http://bugzilla.kernel.org/show_bug.cgi?id=9344
Handled-By	: "Rafael J. Wysocki" <rjw@sisk.pl>
Patch		: 


Subject		: 2.6.24-rc2 STD with s2disk fails to activate suspended system after loading
Submitter	: Chris Friedhoff <chris@friedhoff.org>
References	: http://lkml.org/lkml/2007/11/10/114
		  http://bugzilla.kernel.org/show_bug.cgi?id=9345
Handled-By	: 
Patch		: 


Subject		: cd/dvd inaccessible in 2.6.24-rc2
Submitter	: Will Trives <will@trivescon.com.au>
References	: http://lkml.org/lkml/2007/11/9/290
		  http://bugzilla.kernel.org/show_bug.cgi?id=9346
Handled-By	: Alan Cox <alan@lxorguk.ukuu.org.uk>
		  Jeff Garzik <jeff@garzik.org>
Patch		: 


Subject		: [PATCH] x86: show cpuinfo only for online CPUs
Submitter	: "Andreas Herrmann" <andreas.herrmann3@amd.com>
References	: http://lkml.org/lkml/2007/11/1/207
		  http://bugzilla.kernel.org/show_bug.cgi?id=9348
Handled-By	: Glauber de Oliveira Costa <gcosta@redhat.com>
		  "H. Peter Anvin" <hpa@zytor.com>
Patch		: http://lkml.org/lkml/2007/11/1/246


Subject		: 2.6.24-rc2: Network commit causes SLUB performance regression with tbench
Submitter	: Christoph Lameter <clameter@sgi.com>
References	: http://lkml.org/lkml/2007/11/9/246
		  http://bugzilla.kernel.org/show_bug.cgi?id=9350
Handled-By	: Nick Piggin <nickpiggin@yahoo.com.au>
Patch		: 


Subject		: 2.6.24-rc1 on PPC64: machine check exception
Submitter	: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
References	: http://lkml.org/lkml/2007/11/5/92
Handled-By	: Anton Blanchard <anton@samba.org>
		  http://bugzilla.kernel.org/show_bug.cgi?id=9351
Patch		: http://patchwork.ozlabs.org/linuxppc/patch?id=14475


Subject		: 2.6.24-rc1-gb4f5550 oops
Submitter	: Grant Wilson <grant.wilson@zen.co.uk>
References	: http://lkml.org/lkml/2007/11/5/6
		  http://bugzilla.kernel.org/show_bug.cgi?id=9352
Handled-By	: "Rafael J. Wysocki" <rjw@sisk.pl>
Patch		: 


For details, please follow the links given in references.

As you can see, there is a Bugzilla entry for each of the listed regressions.
There also is a Bugzilla entry used for tracking the regressions from 2.6.23,
unresolved as well as resolved, at:

http://bugzilla.kernel.org/show_bug.cgi?id=9243

Please let me know if there are any Bugzilla entries that should be added to
the list in there.

Greetings,
Rafael

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Alan Cox]

> Subject		: 2.6.24-rc1: pata_acpi fails to activate DMA for DVD-ROM on ALi M5229 secondary channel
> Submitter	: Andrey Borzenkov <arvidjaar@mail.ru>
> References	: http://marc.info/?l=linux-kernel&m=119342005216716&w=2
> 		  http://bugzilla.kernel.org/show_bug.cgi?id=9252
> Handled-By	: Alan Cox <alan@lxorguk.ukuu.org.uk>
> Patch		: 
> Note		: pata_acpi was not present in 2.6.23

As I said before pata_acpi was not present in 2.6.23 -> Not a regression.
WONTFIX for 2.6.24. Not actually clear it is even a bug, the interactions
between using pata_acpi and simplex controllers are not documented
anywhere 8(

> Subject		: 2.6.24-rc1: pata_amd fails to detect 80-pin wire
> Submitter	: "Thomas Lindroth" <thomas.lindroth@gmail.com>
> References	: http://lkml.org/lkml/2007/11/7/152
> 		  http://bugzilla.kernel.org/show_bug.cgi?id=9322

Tejun is looking into this - its not trivial so may be 2.6.25 material.
Similar reports for some other controllers (notably VIA).

> Subject		: cd/dvd inaccessible in 2.6.24-rc2
> Submitter	: Will Trives <will@trivescon.com.au>
> References	: http://lkml.org/lkml/2007/11/9/290
> 		  http://bugzilla.kernel.org/show_bug.cgi?id=9346
> Handled-By	: Alan Cox <alan@lxorguk.ukuu.org.uk>
> 		  Jeff Garzik <jeff@garzik.org>

Not sure who is handling this now - seems to be an IRQ routing bug
introduced in -rc2. I've got a pile of similar breakage reports for
random ATA controllers.

Thanks

Alan

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Ingo Molnar]

* Rafael J. Wysocki <rjw@sisk.pl> wrote:

> Subject		: [regression] v2.6.24-rc1-497-gb1d08ac: kde battery icon gone
> Submitter	: Thomas Meyer <thomas@m3y3r.de>
> References	: http://lkml.org/lkml/2007/11/2/165
> 		  http://bugzilla.kernel.org/show_bug.cgi?id=9297
> Handled-By	: Andrey Borzenkov <arvidjaar@mail.ru>
> 		  Ingo Molnar <mingo@elte.hu>
> Patch		: 
> Note		: goes away if ACPI_PROCFS is set

should be fixed by acpi-make-acpi_procfs-default-to-y.patch in -mm. (not 
yet upstream i think, but should before v2.6.24)

	Ingo

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Francois Romieu]

Rafael J. Wysocki <rjw@sisk.pl> :
> [Note: Due to git.kernel.org not responding I'm unable to check which fixes
> have already been merged since the last report.]
[...]
> Subject	: 2.6.24-rc1 kills onboard r8169 (rtl8111b) NIC
> Submitter	: "Sergey S. Kostyliov" <rathamahata@gmail.com>
> References	: http://lkml.org/lkml/2007/10/28/144
> 		  http://bugzilla.kernel.org/show_bug.cgi?id=9257
> Handled-By	: Francois Romieu <romieu@fr.zoreil.com>
> Patch		: http://bugzilla.kernel.org/attachment.cgi?id=13441&action=view

Fixed and merged in Linus's tree as:
- 50d84c2dc00e48ff9ba018ed0dd23276cf79e566
- b9d04e2401bf308df921d3bbbdacab40fadc27bb

-- 
Ueimor

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Rafael J. Wysocki]

On Sunday, 11 of November 2007, Alan Cox wrote:
> > Subject		: 2.6.24-rc1: pata_acpi fails to activate DMA for DVD-ROM on ALi M5229 secondary channel
> > Submitter	: Andrey Borzenkov <arvidjaar@mail.ru>
> > References	: http://marc.info/?l=linux-kernel&m=119342005216716&w=2
> > 		  http://bugzilla.kernel.org/show_bug.cgi?id=9252
> > Handled-By	: Alan Cox <alan@lxorguk.ukuu.org.uk>
> > Patch		: 
> > Note		: pata_acpi was not present in 2.6.23
> 
> As I said before pata_acpi was not present in 2.6.23 -> Not a regression.

OK, dropped.

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Bartlomiej Zolnierkiewicz]

On Sunday 11 November 2007, Alan Cox wrote:

> > Subject		: 2.6.24-rc1: pata_amd fails to detect 80-pin wire
> > Submitter	: "Thomas Lindroth" <thomas.lindroth@gmail.com>
> > References	: http://lkml.org/lkml/2007/11/7/152
> > 		  http://bugzilla.kernel.org/show_bug.cgi?id=9322

http://lkml.org/lkml/2007/10/12/537

The regression itself has been foreseen a month ago and it is quite
sad that it is still not fixed...

> Tejun is looking into this - its not trivial so may be 2.6.25 material.
> Similar reports for some other controllers (notably VIA).

We may fix the regression in a bit different way for now and give Tejun
some more time for the complete rework of the cable detection code.

[PATCH] pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA timings

* Don't program UDMA timings when programming PIO or MWDMA modes.

  This has also a nice side-effect of fixing regression added by commit
  681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling of
  SRST reset sequences") (->set_piomode method for PIO0 is called before
  ->cable_detect method which checks UDMA timings to get the cable type).

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
Untested, please don't merge until it is confirmed to fix the problem.

 drivers/ata/pata_amd.c |    5 +++--
 drivers/ata/pata_via.c |    4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

Index: b/drivers/ata/pata_amd.c
===================================================================
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.9"
+#define DRV_VERSION "0.3.10"
 
 /**
  *	timing_setup		-	shared timing computation and load
@@ -115,7 +115,8 @@ static void timing_setup(struct ata_port
 	}
 
 	/* UDMA timing */
-	pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
+	if (at.udma)
+		pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
 }
 
 /**
Index: b/drivers/ata/pata_via.c
===================================================================
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -63,7 +63,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
 
 /*
  *	The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -296,7 +296,7 @@ static void via_do_set_mode(struct ata_p
 	}
 
 	/* Set UDMA unless device is not UDMA capable */
-	if (udma_type) {
+	if (udma_type && t.udma) {
 		u8 cable80_status;
 
 		/* Get 80-wire cable detection bit */

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Alan Cox]

> [PATCH] pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA timings
> 
> * Don't program UDMA timings when programming PIO or MWDMA modes.
> 
>   This has also a nice side-effect of fixing regression added by commit
>   681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling of
>   SRST reset sequences") (->set_piomode method for PIO0 is called before
>   ->cable_detect method which checks UDMA timings to get the cable type).

I'm not sure this helps as if the ACPI _GTF method is looking at the
flags and stuff but it has to be worth a try.


Works for me as a 2.6.24 band aid

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Andrew Morton]

On Sun, 11 Nov 2007 22:46:43 +0000 Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:

> > [PATCH] pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA timings
> > 
> > * Don't program UDMA timings when programming PIO or MWDMA modes.
> > 
> >   This has also a nice side-effect of fixing regression added by commit
> >   681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling of
> >   SRST reset sequences") (->set_piomode method for PIO0 is called before
> >   ->cable_detect method which checks UDMA timings to get the cable type).
> 
> I'm not sure this helps as if the ACPI _GTF method is looking at the
> flags and stuff but it has to be worth a try.
> 
> 
> Works for me as a 2.6.24 band aid

I'm looking at that "Untested, please don't merge until it is confirmed to
fix the problem." comment..

Thomas, can you please give it a try, let us know?

Thanks

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Thomas Lindroth]

> > > [PATCH] pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA timings
> > >
> > > * Don't program UDMA timings when programming PIO or MWDMA modes.
> > >
> > >   This has also a nice side-effect of fixing regression added by commit
> > >   681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling of
> > >   SRST reset sequences") (->set_piomode method for PIO0 is called before
> > >   ->cable_detect method which checks UDMA timings to get the cable type).
> >
> > I'm not sure this helps as if the ACPI _GTF method is looking at the
> > flags and stuff but it has to be worth a try.
> >
> >
> > Works for me as a 2.6.24 band aid
>
> I'm looking at that "Untested, please don't merge until it is confirmed to
> fix the problem." comment..
>
> Thomas, can you please give it a try, let us know?
>
> Thanks
>

I can confirm that the patch "pata_amd/pata_via: de-couple programming
of PIO/MWDMA and UDMA timings" does fix my issue "pata_amd fails to
detect 80-pin wire".

Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated)

[Andrew Morton]

On Tue, 13 Nov 2007 14:34:19 +0100 "Thomas Lindroth" <thomas.lindroth@gmail.com> wrote:

> >
> > On Sun, 11 Nov 2007 22:46:43 +0000 Alan Cox <alan@lxorguk.ukuu.org.uk>
> > wrote:
> >
> > > > [PATCH] pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA
> > timings
> > > >
> > > > * Don't program UDMA timings when programming PIO or MWDMA modes.
> > > >
> > > >   This has also a nice side-effect of fixing regression added by
> > commit
> > > >   681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling
> > of
> > > >   SRST reset sequences") (->set_piomode method for PIO0 is called
> > before
> > > >   ->cable_detect method which checks UDMA timings to get the cable
> > type).
> > >
> > > I'm not sure this helps as if the ACPI _GTF method is looking at the
> > > flags and stuff but it has to be worth a try.
> > >
> > >
> > > Works for me as a 2.6.24 band aid
> >
> > I'm looking at that "Untested, please don't merge until it is confirmed to
> > fix the problem." comment..
> >
> > Thomas, can you please give it a try, let us know?
> >
> > Thanks
> >
> 
> I can confirm that the patch "pata_amd/pata_via: de-couple programming of
> PIO/MWDMA and UDMA timings" does fix my issue "pata_amd fails to detect
> 80-pin wire".
> 

Great, thanks for testing it.

I moved that patch to the "to send to maintainers as a 2.6.24 fix" queue. 
I should get all that material sent out hopefully tomorrow, if I can manage
to get 2.6.24-rc2-mm1 to limp out the door.

[bug] SLOB crash, 2.6.24-rc2

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 841 bytes --]


there's a new SLOB regression - the attached config crashes with:

[   61.245190] rc.sysinit used greatest stack depth: 1680 bytes left
[   61.386859] list_add corruption. prev->next should be next (407d973c), but was 418cf818. (prev=41877098).
[   61.396328] ------------[ cut here ]------------
[   61.400910] kernel BUG at lib/list_debug.c:33!
[   61.405330] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC

looks like memory corruption of some sort and it's reproducible. Picking 
CONFIG_SLUB makes the crash go away. Booting v2.6.23 with the same 
.config works fine.

bisection is difficult due to networking releated Kconfig problems: if i 
put my .24 .config into .23 then the network drivers get lost. (we 
should be more Kconfig-compatible between kernel releases, to ease 
bisection efforts)

(full bootlog and config attached)

	Ingo

[-- Attachment #2: crash.log --]
[-- Type: text/plain, Size: 166122 bytes --]

[    0.000000] Linux version 2.6.24-rc2 (mingo@dione) (gcc version 4.2.2) #183 Tue Nov 13 19:51:34 CET 2007
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] console [earlyser0] enabled
[    0.000000] using polling idle threads.
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 1023MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5680
[    0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   262128
[    0.000000]   HighMem    262128 ->   262128
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262128
[    0.000000] On node 0 totalpages: 262128
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 2015 pages used for memmap
[    0.000000]   Normal zone: 256017 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] Using APIC driver default
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[    0.000000] Processor #0 15:3 APIC version 17
[    0.000000] Processor #1 15:3 APIC version 17
[    0.000000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[    0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Processors: 1
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260081
[    0.000000] Kernel command line: root=/dev/sda1 console=tty earlyprintk=serial,ttyS0,115200,keep 3 profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 lapic hpet=disable idle=mwait idle=poll
[    0.000000] kernel profiling enabled (shift: 0)
[    0.000000] debug: sysrq always enabled.
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] CPU 0 irqstacks, hard=408b9000 soft=408b8000
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2160.230 MHz processor.
[   12.709369] spurious 8259A interrupt: IRQ7.
[   12.714225] Console: colour VGA+ 80x25
[   12.717797] console [tty0] enabled
[   13.028437] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[   13.036147] ... MAX_LOCKDEP_SUBCLASSES:    8
[   13.040394] ... MAX_LOCK_DEPTH:          30
[   13.044553] ... MAX_LOCKDEP_KEYS:        2048
[   13.048886] ... CLASSHASH_SIZE:           1024
[   13.053306] ... MAX_LOCKDEP_ENTRIES:     8192
[   13.057639] ... MAX_LOCKDEP_CHAINS:      16384
[   13.062058] ... CHAINHASH_SIZE:          8192
[   13.066391]  memory used by lock dependency info: 1024 kB
[   13.071765]  per task-struct memory footprint: 1680 bytes
[   13.077423] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   13.084735] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   13.135019] Memory: 1006080k/1048512k available (5065k kernel code, 41924k reserved, 2555k data, 264k init, 0k highmem)
[   13.145691] virtual kernel memory layout:
[   13.145692]     fixmap  : 0xfffab000 - 0xfffff000   ( 336 kB)
[   13.145693]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   13.145694]     vmalloc : 0x80800000 - 0xff7fe000   (2031 MB)
[   13.145695]     lowmem  : 0x40000000 - 0x7fff0000   (1023 MB)
[   13.145696]       .init : 0x40873000 - 0x408b5000   ( 264 kB)
[   13.145697]       .data : 0x405f2549 - 0x408712a0   (2555 kB)
[   13.145698]       .text : 0x40100000 - 0x405f2549   (5065 kB)
[   13.189711] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   13.277811] Calibrating delay using timer specific routine.. 4324.65 BogoMIPS (lpj=8649306)
[   13.286050] Security Framework initialized
[   13.290084] SELinux:  Disabled at boot.
[   13.293895] Capability LSM initialized
[   13.297624] Mount-cache hash table entries: 512
[   13.302603] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
[   13.313135] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   13.320248] CPU: L2 Cache: 512K (64 bytes/line)
[   13.324755] CPU: After all inits, caps: 178bfbf7 e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
[   13.334799] Intel machine check architecture supported.
[   13.340007] Intel machine check reporting enabled on CPU#0.
[   13.345556] Compat vDSO mapped to ffffe000.
[   13.349719] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[   13.356639] Checking 'hlt' instruction... OK.
[   13.374982] Freeing SMP alternatives: 0k freed
[   13.379487] enabled ExtINT on CPU#0
[   13.382914] ExtINT not setup in hardware but reported by MP table
[   13.389012] ENABLING IO-APIC IRQs
[   13.392211] init IO_APIC IRQs
[   13.395158]  IO-APIC (apicid-pin) 2-0 not connected.
[   13.400163]  IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
[   13.408882] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[   13.454318] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   13.460015] ...trying to set up timer (IRQ0) through the 8259A ... 
[   13.466082] ..... (found pin 0) ...works.
[   13.509860] number of MP IRQ sources: 17.
[   13.513845] number of IO-APIC #2 registers: 24.
[   13.518352] testing the IO APIC.......................
[   13.523468] IO APIC #2......
[   13.526324] .... register #00: 00000000
[   13.530137] .......    : physical APIC id: 00
[   13.534470] .......    : Delivery Type: 0
[   13.538458] .......    : LTS          : 0
[   13.542444] .... register #01: 00170011
[   13.546257] .......     : max redirection entries: 0017
[   13.551456] .......     : PRQ implemented: 0
[   13.555703] .......     : IO APIC version: 0011
[   13.560209] .... register #02: 00000000
[   13.564022] .......     : arbitration: 00
[   13.568008] .... IRQ redirection table:
[   13.571822]  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
[   13.577890]  00 001 01  0    0    0   0   0    1    1    31
[   13.583437]  01 001 01  0    0    0   0   0    1    1    39
[   13.588983]  02 000 00  1    0    0   0   0    0    0    00
[   13.594530]  03 001 01  1    1    0   1   0    1    1    41
[   13.600076]  04 001 01  0    0    0   0   0    1    1    49
[   13.605617]  05 001 01  1    1    0   1   0    1    1    51
[   13.611170]  06 001 01  0    0    0   0   0    1    1    59
[   13.616715]  07 001 01  1    0    0   0   0    1    1    61
[   13.622261]  08 001 01  0    0    0   0   0    1    1    69
[   13.627808]  09 001 01  0    0    0   0   0    1    1    71
[   13.633348]  0a 001 01  0    0    0   0   0    1    1    79
[   13.638899]  0b 001 01  1    1    0   1   0    1    1    81
[   13.644447]  0c 001 01  0    0    0   0   0    1    1    89
[   13.649992]  0d 001 01  0    0    0   0   0    1    1    91
[   13.655539]  0e 001 01  0    0    0   0   0    1    1    99
[   13.661081]  0f 001 01  0    0    0   0   0    1    1    A1
[   13.666632]  10 000 00  1    0    0   0   0    0    0    00
[   13.672178]  11 000 00  1    0    0   0   0    0    0    00
[   13.677719]  12 000 00  1    0    0   0   0    0    0    00
[   13.683271]  13 000 00  1    0    0   0   0    0    0    00
[   13.688817]  14 000 00  1    0    0   0   0    0    0    00
[   13.694363]  15 000 00  1    0    0   0   0    0    0    00
[   13.699909]  16 000 00  1    0    0   0   0    0    0    00
[   13.705451]  17 000 00  1    0    0   0   0    0    0    00
[   13.710999] IRQ to pin mappings:
[   13.714206] IRQ0 -> 0:0
[   13.716628] IRQ1 -> 0:1
[   13.719054] IRQ3 -> 0:3
[   13.721481] IRQ4 -> 0:4
[   13.723907] IRQ5 -> 0:5
[   13.726334] IRQ6 -> 0:6
[   13.728760] IRQ7 -> 0:7
[   13.731187] IRQ8 -> 0:8
[   13.733613] IRQ9 -> 0:9
[   13.736039] IRQ10 -> 0:10
[   13.738640] IRQ11 -> 0:11
[   13.741240] IRQ12 -> 0:12
[   13.743839] IRQ13 -> 0:13
[   13.746439] IRQ14 -> 0:14
[   13.749038] IRQ15 -> 0:15
[   13.751639] .................................... done.
[   13.756757] Using local APIC timer interrupts.
[   13.756758] calibrating APIC timer ...
[   13.869803] ... lapic delta = 1350196
[   13.873338] ... PM timer delta = 0
[   13.876717] ..... delta 1350196
[   13.879837] ..... mult: 57986852
[   13.883043] ..... calibration result: 864125
[   13.887290] ..... CPU clock speed is 2160.1256 MHz.
[   13.892143] ..... host bus clock speed is 216.0125 MHz.
[   13.897342] ... verify APIC timer
[   14.008634] ... jiffies delta = 25
[   14.011913] ... jiffies result ok
[   14.015587] khelper used greatest stack depth: 3144 bytes left
[   14.021462] Calling initcall 0x408936eb: init_cpufreq_transition_notifier_list+0x0/0xd()
[   14.029390] initcall 0x408936eb: init_cpufreq_transition_notifier_list+0x0/0xd() returned 0.
[   14.037794] initcall 0x408936eb ran for 0 msecs: init_cpufreq_transition_notifier_list+0x0/0xd()
[   14.047009] Calling initcall 0x40896946: net_ns_init+0x0/0xd0()
[   14.052900] net_namespace: 80 bytes
[   14.056405] initcall 0x40896946: net_ns_init+0x0/0xd0() returned 0.
[   14.062606] initcall 0x40896946 ran for 3 msecs: net_ns_init+0x0/0xd0()
[   14.069194] Calling initcall 0x408780e2: cpufreq_tsc+0x0/0xc()
[   14.074998] initcall 0x408780e2: cpufreq_tsc+0x0/0xc() returned 0.
[   14.081151] initcall 0x408780e2 ran for 0 msecs: cpufreq_tsc+0x0/0xc()
[   14.087653] Calling initcall 0x4087c6c6: reboot_init+0x0/0xd()
[   14.093459] initcall 0x4087c6c6: reboot_init+0x0/0xd() returned 0.
[   14.099612] initcall 0x4087c6c6 ran for 0 msecs: reboot_init+0x0/0xd()
[   14.106109] Calling initcall 0x40881007: print_banner+0x0/0x9()
[   14.112002] Booting paravirtualized kernel on bare hardware
[   14.117551] initcall 0x40881007: print_banner+0x0/0x9() returned 0.
[   14.123791] initcall 0x40881007 ran for 3 msecs: print_banner+0x0/0x9()
[   14.130375] Calling initcall 0x40882703: sysctl_init+0x0/0x19()
[   14.136708] initcall 0x40882703: sysctl_init+0x0/0x19() returned 0.
[   14.142819] initcall 0x40882703 ran for 0 msecs: sysctl_init+0x0/0x19()
[   14.149406] Calling initcall 0x40883253: init_jiffies_clocksource+0x0/0xa()
[   14.156344] initcall 0x40883253: init_jiffies_clocksource+0x0/0xa() returned 0.
[   14.163620] initcall 0x40883253 ran for 0 msecs: init_jiffies_clocksource+0x0/0xa()
[   14.171246] Calling initcall 0x408834e9: pm_init+0x0/0x1e()
[   14.176798] initcall 0x408834e9: pm_init+0x0/0x1e() returned 0.
[   14.182684] initcall 0x408834e9 ran for 0 msecs: pm_init+0x0/0x1e()
[   14.188925] Calling initcall 0x40883de3: ksysfs_init+0x0/0x46()
[   14.194830] initcall 0x40883de3: ksysfs_init+0x0/0x46() returned 0.
[   14.201055] initcall 0x40883de3 ran for 0 msecs: ksysfs_init+0x0/0x46()
[   14.207644] Calling initcall 0x40885bde: filelock_init+0x0/0x2d()
[   14.213708] initcall 0x40885bde: filelock_init+0x0/0x2d() returned 0.
[   14.220123] initcall 0x40885bde ran for 0 msecs: filelock_init+0x0/0x2d()
[   14.226880] Calling initcall 0x408862ff: init_aout_binfmt+0x0/0xa()
[   14.233127] initcall 0x408862ff: init_aout_binfmt+0x0/0xa() returned 0.
[   14.239709] initcall 0x408862ff ran for 0 msecs: init_aout_binfmt+0x0/0xa()
[   14.246639] Calling initcall 0x40886309: init_script_binfmt+0x0/0xa()
[   14.253053] initcall 0x40886309: init_script_binfmt+0x0/0xa() returned 0.
[   14.259814] initcall 0x40886309 ran for 0 msecs: init_script_binfmt+0x0/0xa()
[   14.266918] Calling initcall 0x40886313: init_elf_binfmt+0x0/0xa()
[   14.273071] initcall 0x40886313: init_elf_binfmt+0x0/0xa() returned 0.
[   14.279573] initcall 0x40886313 ran for 0 msecs: init_elf_binfmt+0x0/0xa()
[   14.286416] Calling initcall 0x40887f6a: debugfs_init+0x0/0x39()
[   14.292482] initcall 0x40887f6a: debugfs_init+0x0/0x39() returned 0.
[   14.298722] initcall 0x40887f6a ran for 0 msecs: debugfs_init+0x0/0x39()
[   14.305396] Calling initcall 0x408880f3: securityfs_init+0x0/0x39()
[   14.311709] initcall 0x408880f3: securityfs_init+0x0/0x39() returned 0.
[   14.318222] initcall 0x408880f3 ran for 0 msecs: securityfs_init+0x0/0x39()
[   14.325157] Calling initcall 0x40888c91: random32_init+0x0/0x13()
[   14.331223] initcall 0x40888c91: random32_init+0x0/0x13() returned 0.
[   14.337633] initcall 0x40888c91 ran for 0 msecs: random32_init+0x0/0x13()
[   14.344395] Calling initcall 0x408936f8: cpufreq_core_init+0x0/0x21()
[   14.350806] initcall 0x408936f8: cpufreq_core_init+0x0/0x21() returned 0.
[   14.357565] initcall 0x408936f8 ran for 0 msecs: cpufreq_core_init+0x0/0x21()
[   14.364674] Calling initcall 0x40893776: cpuidle_init+0x0/0x14()
[   14.370659] initcall 0x40893776: cpuidle_init+0x0/0x14() returned 0.
[   14.376977] initcall 0x40893776 ran for 0 msecs: cpuidle_init+0x0/0x14()
[   14.383652] Calling initcall 0x40896826: sock_init+0x0/0x57()
[   14.389417] initcall 0x40896826: sock_init+0x0/0x57() returned 0.
[   14.395439] initcall 0x40896826 ran for 0 msecs: sock_init+0x0/0x57()
[   14.401849] Calling initcall 0x408971b3: netpoll_init+0x0/0x35()
[   14.407829] initcall 0x408971b3: netpoll_init+0x0/0x35() returned 0.
[   14.414155] initcall 0x408971b3 ran for 0 msecs: netpoll_init+0x0/0x35()
[   14.420831] Calling initcall 0x408975ab: netlink_proto_init+0x0/0x10e()
[   14.427441] NET: Registered protocol family 16
[   14.431860] initcall 0x408975ab: netlink_proto_init+0x0/0x10e() returned 0.
[   14.438767] initcall 0x408975ab ran for 3 msecs: netlink_proto_init+0x0/0x10e()
[   14.446046] Calling initcall 0x40888bcd: kobject_uevent_init+0x0/0x50()
[   14.452639] initcall 0x40888bcd: kobject_uevent_init+0x0/0x50() returned 0.
[   14.459568] initcall 0x40888bcd ran for 0 msecs: kobject_uevent_init+0x0/0x50()
[   14.466845] Calling initcall 0x40888dc2: pcibus_class_init+0x0/0xa()
[   14.473262] initcall 0x40888dc2: pcibus_class_init+0x0/0xa() returned 0.
[   14.479855] initcall 0x40888dc2 ran for 0 msecs: pcibus_class_init+0x0/0xa()
[   14.486863] Calling initcall 0x40889246: pci_driver_init+0x0/0xa()
[   14.493104] initcall 0x40889246: pci_driver_init+0x0/0xa() returned 0.
[   14.499527] initcall 0x40889246 ran for 0 msecs: pci_driver_init+0x0/0xa()
[   14.506362] Calling initcall 0x408895f1: lcd_class_init+0x0/0x41()
[   14.512594] initcall 0x408895f1: lcd_class_init+0x0/0x41() returned 0.
[   14.519015] initcall 0x408895f1 ran for 0 msecs: lcd_class_init+0x0/0x41()
[   14.525861] Calling initcall 0x40889632: backlight_class_init+0x0/0x41()
[   14.532608] initcall 0x40889632: backlight_class_init+0x0/0x41() returned 0.
[   14.539566] initcall 0x40889632 ran for 0 msecs: backlight_class_init+0x0/0x41()
[   14.546920] Calling initcall 0x4088af98: video_output_class_init+0x0/0xa()
[   14.553845] initcall 0x4088af98: video_output_class_init+0x0/0xa() returned 0.
[   14.560960] initcall 0x4088af98 ran for 0 msecs: video_output_class_init+0x0/0xa()
[   14.568502] Calling initcall 0x4088b064: tty_class_init+0x0/0x1f()
[   14.574725] initcall 0x4088b064: tty_class_init+0x0/0x1f() returned 0.
[   14.581151] initcall 0x4088b064 ran for 0 msecs: tty_class_init+0x0/0x1f()
[   14.588000] Calling initcall 0x4088bac7: vtconsole_class_init+0x0/0xb1()
[   14.594854] initcall 0x4088bac7: vtconsole_class_init+0x0/0xb1() returned 0.
[   14.601741] initcall 0x4088bac7 ran for 0 msecs: vtconsole_class_init+0x0/0xb1()
[   14.609110] Calling initcall 0x40877fbe: init_pit_clocksource+0x0/0x49()
[   14.615790] initcall 0x40877fbe: init_pit_clocksource+0x0/0x49() returned 0.
[   14.622800] initcall 0x40877fbe ran for 0 msecs: init_pit_clocksource+0x0/0x49()
[   14.630167] Calling initcall 0x4087b495: mtrr_if_init+0x0/0x54()
[   14.636148] initcall 0x4087b495: mtrr_if_init+0x0/0x54() returned 0.
[   14.642472] initcall 0x4087b495 ran for 0 msecs: mtrr_if_init+0x0/0x54()
[   14.649148] Calling initcall 0x4087f675: kdump_buf_page_init+0x0/0x35()
[   14.655734] initcall 0x4087f675: kdump_buf_page_init+0x0/0x35() returned 0.
[   14.662665] initcall 0x4087f675 ran for 0 msecs: kdump_buf_page_init+0x0/0x35()
[   14.669947] Calling initcall 0x4089467d: dmi_id_init+0x0/0x265()
[   14.676140] initcall 0x4089467d: dmi_id_init+0x0/0x265() returned 0.
[   14.682337] initcall 0x4089467d ran for 0 msecs: dmi_id_init+0x0/0x265()
[   14.689013] Calling initcall 0x408948e2: init_cyclone_clocksource+0x0/0x17c()
[   14.696116] initcall 0x408948e2: init_cyclone_clocksource+0x0/0x17c() returned -19.
[   14.703744] initcall 0x408948e2 ran for 0 msecs: init_cyclone_clocksource+0x0/0x17c()
[   14.711544] Calling initcall 0x40895bc3: pci_access_init+0x0/0x2a()
[   14.722364] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
[   14.728590] initcall 0x40895bc3: pci_access_init+0x0/0x2a() returned 0.
[   14.735175] initcall 0x40895bc3 ran for 7 msecs: pci_access_init+0x0/0x2a()
[   14.742107] Calling initcall 0x408777f8: request_standard_resources+0x0/0x2f9()
[   14.749387] Setting up standard PCI resources
[   14.756541] initcall 0x408777f8: request_standard_resources+0x0/0x2f9() returned 0.
[   14.764035] initcall 0x408777f8 ran for 7 msecs: request_standard_resources+0x0/0x2f9()
[   14.772007] Calling initcall 0x40877ef8: topology_init+0x0/0xa()
[   14.778072] initcall 0x40877ef8: topology_init+0x0/0xa() returned 0.
[   14.784331] initcall 0x40877ef8 ran for 0 msecs: topology_init+0x0/0xa()
[   14.790984] Calling initcall 0x4087b220: mtrr_init_finialize+0x0/0x28()
[   14.797571] initcall 0x4087b220: mtrr_init_finialize+0x0/0x28() returned 0.
[   14.804503] initcall 0x4087b220 ran for 0 msecs: mtrr_init_finialize+0x0/0x28()
[   14.811785] Calling initcall 0x4087c701: mca_init+0x0/0x2bd()
[   14.817599] initcall 0x4087c701: mca_init+0x0/0x2bd() returned -19.
[   14.823752] initcall 0x4087c701 ran for 0 msecs: mca_init+0x0/0x2bd()
[   14.830155] Calling initcall 0x40882c7a: param_sysfs_init+0x0/0x13d()
[   14.838040] khelper used greatest stack depth: 3092 bytes left
[   14.856291] initcall 0x40882c7a: param_sysfs_init+0x0/0x13d() returned 0.
[   14.862921] initcall 0x40882c7a ran for 15 msecs: param_sysfs_init+0x0/0x13d()
[   14.870114] Calling initcall 0x40141164: pm_sysrq_init+0x0/0x12()
[   14.876191] initcall 0x40141164: pm_sysrq_init+0x0/0x12() returned 0.
[   14.882593] initcall 0x40141164 ran for 0 msecs: pm_sysrq_init+0x0/0x12()
[   14.889355] Calling initcall 0x408858f4: readahead_init+0x0/0xa()
[   14.895420] initcall 0x408858f4: readahead_init+0x0/0xa() returned 0.
[   14.901832] initcall 0x408858f4 ran for 0 msecs: readahead_init+0x0/0xa()
[   14.908595] Calling initcall 0x408861ce: init_bio+0x0/0xb6()
[   14.914285] initcall 0x408861ce: init_bio+0x0/0xb6() returned 0.
[   14.920207] initcall 0x408861ce ran for 0 msecs: init_bio+0x0/0xb6()
[   14.926530] Calling initcall 0x408888dc: genhd_device_init+0x0/0x4c()
[   14.933002] initcall 0x408888dc: genhd_device_init+0x0/0x4c() returned 0.
[   14.939715] initcall 0x408888dc ran for 0 msecs: genhd_device_init+0x0/0x4c()
[   14.946810] Calling initcall 0x408894f2: fbmem_init+0x0/0x86()
[   14.952748] initcall 0x408894f2: fbmem_init+0x0/0x86() returned 0.
[   14.958768] initcall 0x408894f2 ran for 0 msecs: fbmem_init+0x0/0x86()
[   14.965268] Calling initcall 0x4088b612: misc_init+0x0/0x78()
[   14.971106] initcall 0x4088b612: misc_init+0x0/0x78() returned 0.
[   14.977055] initcall 0x4088b612 ran for 0 msecs: misc_init+0x0/0x78()
[   14.983469] Calling initcall 0x4088f2e5: init_scsi+0x0/0x8c()
[   14.989702] SCSI subsystem initialized
[   14.993325] initcall 0x4088f2e5: init_scsi+0x0/0x8c() returned 0.
[   14.999390] initcall 0x4088f2e5 ran for 3 msecs: init_scsi+0x0/0x8c()
[   15.005800] Calling initcall 0x4088fd88: ata_init+0x0/0x79()
[   15.011522] libata version 3.00 loaded.
[   15.015249] initcall 0x4088fd88: ata_init+0x0/0x79() returned 0.
[   15.021225] initcall 0x4088fd88 ran for 3 msecs: ata_init+0x0/0x79()
[   15.027554] Calling initcall 0x40890000: init_pcmcia_cs+0x0/0x2d()
[   15.033821] initcall 0x40890000: init_pcmcia_cs+0x0/0x2d() returned 0.
[   15.040207] initcall 0x40890000 ran for 0 msecs: init_pcmcia_cs+0x0/0x2d()
[   15.047050] Calling initcall 0x40890115: usb_init+0x0/0x10a()
[   15.053164] usbcore: registered new interface driver usbfs
[   15.058741] usbcore: registered new interface driver hub
[   15.064106] usbcore: registered new device driver usb
[   15.069033] initcall 0x40890115: usb_init+0x0/0x10a() returned 0.
[   15.075095] initcall 0x40890115 ran for 11 msecs: usb_init+0x0/0x10a()
[   15.081594] Calling initcall 0x40890c0b: serio_init+0x0/0x91()
[   15.087562] initcall 0x40890c0b: serio_init+0x0/0x91() returned 0.
[   15.093587] initcall 0x40890c0b ran for 0 msecs: serio_init+0x0/0x91()
[   15.100090] Calling initcall 0x40890efc: gameport_init+0x0/0x91()
[   15.106763] initcall 0x40890efc: gameport_init+0x0/0x91() returned 0.
[   15.113043] initcall 0x40890efc ran for 0 msecs: gameport_init+0x0/0x91()
[   15.119805] Calling initcall 0x4089122e: input_init+0x0/0xf9()
[   15.125743] initcall 0x4089122e: input_init+0x0/0xf9() returned 0.
[   15.131774] initcall 0x4089122e ran for 0 msecs: input_init+0x0/0xf9()
[   15.138261] Calling initcall 0x40891abf: i2c_init+0x0/0x19()
[   15.144106] initcall 0x40891abf: i2c_init+0x0/0x19() returned 0.
[   15.149952] initcall 0x40891abf ran for 0 msecs: i2c_init+0x0/0x19()
[   15.156281] Calling initcall 0x40891b72: power_supply_class_init+0x0/0x25()
[   15.163316] initcall 0x40891b72: power_supply_class_init+0x0/0x25() returned 0.
[   15.170491] initcall 0x40891b72 ran for 0 msecs: power_supply_class_init+0x0/0x25()
[   15.178122] Calling initcall 0x40891b97: hwmon_init+0x0/0x33()
[   15.184034] initcall 0x40891b97: hwmon_init+0x0/0x33() returned 0.
[   15.190076] initcall 0x40891b97 ran for 0 msecs: hwmon_init+0x0/0x33()
[   15.196578] Calling initcall 0x408937ae: leds_init+0x0/0x1f()
[   15.202398] initcall 0x408937ae: leds_init+0x0/0x1f() returned 0.
[   15.208372] initcall 0x408937ae ran for 0 msecs: leds_init+0x0/0x1f()
[   15.214774] Calling initcall 0x408958f3: ac97_bus_init+0x0/0xa()
[   15.220861] initcall 0x408958f3: ac97_bus_init+0x0/0xa() returned 0.
[   15.227081] initcall 0x408958f3 ran for 0 msecs: ac97_bus_init+0x0/0xa()
[   15.233756] Calling initcall 0x40895e78: pci_legacy_init+0x0/0xe3()
[   15.239993] PCI: Probing PCI hardware
[   15.243655] PCI: Probing PCI hardware (bus 00)
[   15.251798] PCI: Transparent bridge - 0000:00:09.0
[   15.261584] initcall 0x40895e78: pci_legacy_init+0x0/0xe3() returned 0.
[   15.268048] initcall 0x40895e78 ran for 19 msecs: pci_legacy_init+0x0/0xe3()
[   15.275068] Calling initcall 0x40896328: pcibios_irq_init+0x0/0x481()
[   15.281737] PCI: Using IRQ router default [10de/005e] at 0000:00:00.0
[   15.288095] PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 3
[   15.293785] PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 11
[   15.299619] PCI->APIC IRQ transform: 0000:05:07.0[A] -> IRQ 11
[   15.305390] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 5
[   15.311108] initcall 0x40896328: pcibios_irq_init+0x0/0x481() returned 0.
[   15.317861] initcall 0x40896328 ran for 19 msecs: pcibios_irq_init+0x0/0x481()
[   15.325056] Calling initcall 0x408967a9: pcibios_init+0x0/0x7d()
[   15.384730] initcall 0x408967a9: pcibios_init+0x0/0x7d() returned 0.
[   15.390924] initcall 0x408967a9 ran for 53 msecs: pcibios_init+0x0/0x7d()
[   15.397685] Calling initcall 0x408968ce: proto_init+0x0/0x28()
[   15.403492] initcall 0x408968ce: proto_init+0x0/0x28() returned 0.
[   15.409644] initcall 0x408968ce ran for 0 msecs: proto_init+0x0/0x28()
[   15.416143] Calling initcall 0x40896ba1: net_dev_init+0x0/0x11b()
[   15.422323] initcall 0x40896ba1: net_dev_init+0x0/0x11b() returned 0.
[   15.428637] initcall 0x40896ba1 ran for 0 msecs: net_dev_init+0x0/0x11b()
[   15.435400] Calling initcall 0x40896cf0: neigh_init+0x0/0x79()
[   15.441203] initcall 0x40896cf0: neigh_init+0x0/0x79() returned 0.
[   15.447358] initcall 0x40896cf0 ran for 0 msecs: neigh_init+0x0/0x79()
[   15.453858] Calling initcall 0x408971e8: fib_rules_init+0x0/0x53()
[   15.460010] initcall 0x408971e8: fib_rules_init+0x0/0x53() returned 0.
[   15.466508] initcall 0x408971e8 ran for 0 msecs: fib_rules_init+0x0/0x53()
[   15.473360] Calling initcall 0x408976b9: genl_init+0x0/0xc3()
[   15.491206] initcall 0x408976b9: genl_init+0x0/0xc3() returned 0.
[   15.497146] initcall 0x408976b9 ran for 15 msecs: genl_init+0x0/0xc3()
[   15.503645] Calling initcall 0x40899665: cipso_v4_init+0x0/0x77()
[   15.509725] initcall 0x40899665: cipso_v4_init+0x0/0x77() returned 0.
[   15.516124] initcall 0x40899665 ran for 0 msecs: cipso_v4_init+0x0/0x77()
[   15.522884] Calling initcall 0x40899b68: bt_init+0x0/0x53()
[   15.528427] Bluetooth: Core ver 2.11
[   15.532324] NET: Registered protocol family 31
[   15.536641] Bluetooth: HCI device and connection manager initialized
[   15.542981] Bluetooth: HCI socket layer initialized
[   15.547819] initcall 0x40899b68: bt_init+0x0/0x53() returned 0.
[   15.553710] initcall 0x40899b68 ran for 15 msecs: bt_init+0x0/0x53()
[   15.560036] Calling initcall 0x4089a4ba: wireless_nlevent_init+0x0/0x35()
[   15.566793] initcall 0x4089a4ba: wireless_nlevent_init+0x0/0x35() returned 0.
[   15.573902] initcall 0x4089a4ba ran for 0 msecs: wireless_nlevent_init+0x0/0x35()
[   15.581357] Calling initcall 0x405cdd18: cfg80211_init+0x0/0x38()
[   15.587625] initcall 0x405cdd18: cfg80211_init+0x0/0x38() returned 0.
[   15.593911] initcall 0x405cdd18 ran for 0 msecs: cfg80211_init+0x0/0x38()
[   15.600671] Calling initcall 0x4089a5cc: netlbl_init+0x0/0x70()
[   15.606561] NetLabel: Initializing
[   15.609946] NetLabel:  domain hash size = 128
[   15.614281] NetLabel:  protocols = UNLABELED CIPSOv4
[   15.619288] NetLabel:  unlabeled traffic allowed by default
[   15.624766] initcall 0x4089a5cc: netlbl_init+0x0/0x70() returned 0.
[   15.631000] initcall 0x4089a5cc ran for 15 msecs: netlbl_init+0x0/0x70()
[   15.637675] Calling initcall 0x40883195: clocksource_done_booting+0x0/0xd()
[   15.644606] initcall 0x40883195<6>Time: tsc clocksource has been installed.
[   15.651550] : clocksource_done_booting+0x0/0xd() returned 0.
[   15.657174] initcall 0x40883195 ran for 0 msecs: clocksource_done_booting+0x0/0xd()
[   15.664802] Calling initcall 0x40885b74: init_pipe_fs+0x0/0x3d()
[   15.670818] initcall 0x40885b74: init_pipe_fs+0x0/0x3d() returned 0.
[   15.677107] initcall 0x40885b74 ran for 0 msecs: init_pipe_fs+0x0/0x3d()
[   15.683779] Calling initcall 0x4088afa2: chr_dev_init+0x0/0x97()
[   15.690997] initcall 0x4088afa2: chr_dev_init+0x0/0x97() returned 0.
[   15.697195] initcall 0x4088afa2 ran for 1 msecs: chr_dev_init+0x0/0x97()
[   15.703867] Calling initcall 0x4088edc5: firmware_class_init+0x0/0x63()
[   15.710553] initcall 0x4088edc5: firmware_class_init+0x0/0x63() returned 0.
[   15.717387] initcall 0x4088edc5 ran for 0 msecs: firmware_class_init+0x0/0x63()
[   15.724666] Calling initcall 0x4088efd3: loopback_init+0x0/0xa()
[   15.730971] initcall 0x4088efd3: loopback_init+0x0/0xa() returned 0.
[   15.737171] initcall 0x4088efd3 ran for 0 msecs: loopback_init+0x0/0xa()
[   15.743843] Calling initcall 0x4089002d: init_pcmcia_bus+0x0/0x73()
[   15.750207] initcall 0x4089002d: init_pcmcia_bus+0x0/0x73() returned 0.
[   15.756667] initcall 0x4089002d ran for 0 msecs: init_pcmcia_bus+0x0/0x73()
[   15.763602] Calling initcall 0x40893719: cpufreq_gov_performance_init+0x0/0xa()
[   15.770890] initcall 0x40893719: cpufreq_gov_performance_init+0x0/0xa() returned 0.
[   15.778506] initcall 0x40893719 ran for 0 msecs: cpufreq_gov_performance_init+0x0/0xa()
[   15.786484] Calling initcall 0x40893723: cpufreq_gov_userspace_init+0x0/0xa()
[   15.793586] initcall 0x40893723: cpufreq_gov_userspace_init+0x0/0xa() returned 0.
[   15.801041] initcall 0x40893723 ran for 0 msecs: cpufreq_gov_userspace_init+0x0/0xa()
[   15.808842] Calling initcall 0x40894a5e: ssb_modinit+0x0/0x56()
[   15.814989] initcall 0x40894a5e: ssb_modinit+0x0/0x56() returned 0.
[   15.821103] initcall 0x40894a5e ran for 0 msecs: ssb_modinit+0x0/0x56()
[   15.827688] Calling initcall 0x40895953: pcibios_assign_resources+0x0/0x72()
[   15.834755] PCI: Bridge: 0000:00:09.0
[   15.838355]   IO window: c000-cfff
[   15.841743]   MEM window: da000000-da0fffff
[   15.845897]   PREFETCH window: disabled.
[   15.849803] PCI: Bridge: 0000:00:0b.0
[   15.853430]   IO window: disabled.
[   15.856822]   MEM window: disabled.
[   15.860281]   PREFETCH window: disabled.
[   15.864189] PCI: Bridge: 0000:00:0c.0
[   15.867815]   IO window: disabled.
[   15.871208]   MEM window: disabled.
[   15.874667]   PREFETCH window: disabled.
[   15.878575] PCI: Bridge: 0000:00:0d.0
[   15.882201]   IO window: disabled.
[   15.885593]   MEM window: disabled.
[   15.889055]   PREFETCH window: disabled.
[   15.892963] PCI: Bridge: 0000:00:0e.0
[   15.896588]   IO window: b000-bfff
[   15.899979]   MEM window: d8000000-d9ffffff
[   15.904134]   PREFETCH window: d0000000-d7ffffff
[   15.908761] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   15.915008] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   15.921247] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   15.927487] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   15.933726] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   15.939923] initcall 0x40895953: pcibios_assign_resources+0x0/0x72() returned 0.
[   15.947281] initcall 0x40895953 ran for 100 msecs: pcibios_assign_resources+0x0/0x72()
[   15.955169] Calling initcall 0x40898354: inet_init+0x0/0x2a8()
[   15.960977] NET: Registered protocol family 2
[   16.003289] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   16.010854] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   16.019611] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[   16.031732] TCP: Hash tables configured (established 131072 bind 65536)
[   16.038249] TCP reno registered
[   16.051242] initcall 0x40898354: inet_init+0x0/0x2a8() returned 0.
[   16.057263] initcall 0x40898354 ran for 86 msecs: inet_init+0x0/0x2a8()
[   16.063849] Calling initcall 0x40876107: populate_rootfs+0x0/0x10d()
[   16.070507] initcall 0x40876107: populate_rootfs+0x0/0x10d() returned 0.
[   16.077048] initcall 0x40876107 ran for 0 msecs: populate_rootfs+0x0/0x10d()
[   16.084066] Calling initcall 0x408770ed: i8259A_init_sysfs+0x0/0x19()
[   16.090717] initcall 0x408770ed: i8259A_init_sysfs+0x0/0x19() returned 0.
[   16.097343] initcall 0x408770ed ran for 0 msecs: i8259A_init_sysfs+0x0/0x19()
[   16.104449] Calling initcall 0x408771c8: sbf_init+0x0/0xc7()
[   16.110080] initcall 0x408771c8: sbf_init+0x0/0xc7() returned 0.
[   16.116062] initcall 0x408771c8 ran for 0 msecs: sbf_init+0x0/0xc7()
[   16.122389] Calling initcall 0x40877edf: i8237A_init_sysfs+0x0/0x19()
[   16.128998] initcall 0x40877edf: i8237A_init_sysfs+0x0/0x19() returned 0.
[   16.135648] initcall 0x40877edf ran for 0 msecs: i8237A_init_sysfs+0x0/0x19()
[   16.142737] Calling initcall 0x40878506: cache_sysfs_init+0x0/0x1fd()
[   16.149588] initcall 0x40878506: cache_sysfs_init+0x0/0x1fd() returned 0.
[   16.156238] initcall 0x40878506 ran for 0 msecs: cache_sysfs_init+0x0/0x1fd()
[   16.163330] Calling initcall 0x4087b1c9: thermal_throttle_init_device+0x0/0x57()
[   16.170691] initcall 0x4087b1c9: thermal_throttle_init_device+0x0/0x57() returned 0.
[   16.178404] initcall 0x4087b1c9 ran for 0 msecs: thermal_throttle_init_device+0x0/0x57()
[   16.186469] Calling initcall 0x4087c3d7: eps_init+0x0/0x35()
[   16.192097] initcall 0x4087c3d7: eps_init+0x0/0x35() returned -19.
[   16.198249] initcall 0x4087c3d7 ran for 0 msecs: eps_init+0x0/0x35()
[   16.204578] Calling initcall 0x4087c40c: speedstep_init+0x0/0x19f()
[   16.210816] initcall 0x4087c40c: speedstep_init+0x0/0x19f() returned -19.
[   16.218011] initcall 0x4087c40c ran for 0 msecs: speedstep_init+0x0/0x19f()
[   16.224946] Calling initcall 0x4087c5ab: speedstep_init+0x0/0xa3()
[   16.231094] initcall 0x4087c5ab: speedstep_init+0x0/0xa3() returned -19.
[   16.237769] initcall 0x4087c5ab ran for 0 msecs: speedstep_init+0x0/0xa3()
[   16.244615] Calling initcall 0x4087c9be: msr_init+0x0/0xb7()
[   16.250470] initcall 0x4087c9be: msr_init+0x0/0xb7() returned 0.
[   16.256355] initcall 0x4087c9be ran for 0 msecs: msr_init+0x0/0xb7()
[   16.262647] Calling initcall 0x4087ca75: microcode_init+0x0/0x95()
[   16.269164] microcode: CPU0 not a capable Intel processor
[   16.274441] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[   16.281735] initcall 0x4087ca75: microcode_init+0x0/0x95() returned 0.
[   16.288214] initcall 0x4087ca75 ran for 12 msecs: microcode_init+0x0/0x95()
[   16.295145] Calling initcall 0x4087d571: init_lapic_sysfs+0x0/0x29()
[   16.301663] initcall 0x4087d571: init_lapic_sysfs+0x0/0x29() returned 0.
[   16.308224] initcall 0x4087d571 ran for 0 msecs: init_lapic_sysfs+0x0/0x29()
[   16.315229] Calling initcall 0x4087e788: ioapic_init_sysfs+0x0/0xb8()
[   16.321829] initcall 0x4087e788: ioapic_init_sysfs+0x0/0xb8() returned 0.
[   16.328457] initcall 0x4087e788 ran for 0 msecs: ioapic_init_sysfs+0x0/0xb8()
[   16.335566] Calling initcall 0x40880f04: init_vmi_clocksource+0x0/0xe8()
[   16.342237] initcall 0x40880f04: init_vmi_clocksource+0x0/0xe8() returned 0.
[   16.349259] initcall 0x40880f04 ran for 0 msecs: init_vmi_clocksource+0x0/0xe8()
[   16.356625] Calling initcall 0x4088102b: add_pcspkr+0x0/0x31()
[   16.362552] initcall 0x4088102b: add_pcspkr+0x0/0x31() returned 0.
[   16.368582] initcall 0x4088102b ran for 0 msecs: add_pcspkr+0x0/0x31()
[   16.375082] Calling initcall 0x408819bd: aes_init+0x0/0x265()
[   16.380834] initcall 0x408819bd: aes_init+0x0/0x265() returned 0.
[   16.386867] initcall 0x408819bd ran for 0 msecs: aes_init+0x0/0x265()
[   16.393283] Calling initcall 0x40881c22: init+0x0/0xa()
[   16.398481] initcall 0x40881c22: init+0x0/0xa() returned 0.
[   16.404028] initcall 0x40881c22 ran for 0 msecs: init+0x0/0xa()
[   16.409922] Calling initcall 0x40881c67: init_sched_debug_procfs+0x0/0x2a()
[   16.416858] initcall 0x40881c67: init_sched_debug_procfs+0x0/0x2a() returned 0.
[   16.424135] initcall 0x40881c67 ran for 0 msecs: init_sched_debug_procfs+0x0/0x2a()
[   16.431763] Calling initcall 0x408824df: create_proc_profile+0x0/0x3d()
[   16.438346] initcall 0x408824df: create_proc_profile+0x0/0x3d() returned 0.
[   16.445280] initcall 0x408824df ran for 0 msecs: create_proc_profile+0x0/0x3d()
[   16.452559] Calling initcall 0x4088262c: ioresources_init+0x0/0x35()
[   16.458887] initcall 0x4088262c: ioresources_init+0x0/0x35() returned 0.
[   16.465558] initcall 0x4088262c ran for 0 msecs: ioresources_init+0x0/0x35()
[   16.472577] Calling initcall 0x408828b1: uid_cache_init+0x0/0x63()
[   16.478730] initcall 0x408828b1: uid_cache_init+0x0/0x63() returned 0.
[   16.485230] initcall 0x408828b1 ran for 0 msecs: uid_cache_init+0x0/0x63()
[   16.492077] Calling initcall 0x40882db7: init_posix_timers+0x0/0x89()
[   16.498488] initcall 0x40882db7: init_posix_timers+0x0/0x89() returned 0.
[   16.505249] initcall 0x40882db7 ran for 0 msecs: init_posix_timers+0x0/0x89()
[   16.512355] Calling initcall 0x40882e40: init_posix_cpu_timers+0x0/0x9c()
[   16.519112] initcall 0x40882e40: init_posix_cpu_timers+0x0/0x9c() returned 0.
[   16.526219] initcall 0x40882e40 ran for 0 msecs: init_posix_cpu_timers+0x0/0x9c()
[   16.533677] Calling initcall 0x40882fcb: latency_init+0x0/0x1c()
[   16.539658] initcall 0x40882fcb: latency_init+0x0/0x1c() returned 0.
[   16.545977] initcall 0x40882fcb ran for 0 msecs: latency_init+0x0/0x1c()
[   16.552652] Calling initcall 0x40882fe7: nsproxy_cache_init+0x0/0x30()
[   16.559153] initcall 0x40882fe7: nsproxy_cache_init+0x0/0x30() returned 0.
[   16.565995] initcall 0x40882fe7 ran for 0 msecs: nsproxy_cache_init+0x0/0x30()
[   16.573194] Calling initcall 0x40883017: timekeeping_init_device+0x0/0x19()
[   16.580317] initcall 0x40883017: timekeeping_init_device+0x0/0x19() returned 0.
[   16.587474] initcall 0x40883017 ran for 0 msecs: timekeeping_init_device+0x0/0x19()
[   16.595091] Calling initcall 0x408831a2: init_clocksource_sysfs+0x0/0x3f()
[   16.602120] initcall 0x408831a2: init_clocksource_sysfs+0x0/0x3f() returned 0.
[   16.609182] initcall 0x408831a2 ran for 0 msecs: init_clocksource_sysfs+0x0/0x3f()
[   16.616721] Calling initcall 0x4088325d: init_timer_list_procfs+0x0/0x26()
[   16.623568] initcall 0x4088325d: init_timer_list_procfs+0x0/0x26() returned 0.
[   16.630758] initcall 0x4088325d ran for 0 msecs: init_timer_list_procfs+0x0/0x26()
[   16.638300] Calling initcall 0x408833c6: lockdep_proc_init+0x0/0x57()
[   16.644717] initcall 0x408833c6: lockdep_proc_init+0x0/0x57() returned 0.
[   16.651472] initcall 0x408833c6 ran for 0 msecs: lockdep_proc_init+0x0/0x57()
[   16.658579] Calling initcall 0x4088341d: init+0x0/0x91()
[   16.663914] initcall 0x4088341d: init+0x0/0x91() returned 0.
[   16.669498] initcall 0x4088341d ran for 0 msecs: init+0x0/0x91()
[   16.675477] Calling initcall 0x4013f607: init_rttest+0x0/0x108()
[   16.682622] Initializing RT-Tester: OK
[   16.686246] initcall 0x4013f607: init_rttest+0x0/0x108() returned 0.
[   16.692564] initcall 0x4013f607 ran for 4 msecs: init_rttest+0x0/0x108()
[   16.699240] Calling initcall 0x408834ae: proc_dma_init+0x0/0x1c()
[   16.705307] initcall 0x408834ae: proc_dma_init+0x0/0x1c() returned 0.
[   16.711720] initcall 0x408834ae ran for 0 msecs: proc_dma_init+0x0/0x1c()
[   16.718479] Calling initcall 0x408834ca: kallsyms_init+0x0/0x1f()
[   16.724544] initcall 0x408834ca: kallsyms_init+0x0/0x1f() returned 0.
[   16.730956] initcall 0x408834ca ran for 0 msecs: kallsyms_init+0x0/0x1f()
[   16.737718] Calling initcall 0x4088353c: crash_save_vmcoreinfo_init+0x0/0x3fe()
[   16.745006] initcall 0x4088353c: crash_save_vmcoreinfo_init+0x0/0x3fe() returned 0.
[   16.752620] initcall 0x4088353c ran for 0 msecs: crash_save_vmcoreinfo_init+0x0/0x3fe()
[   16.760596] Calling initcall 0x40883507: crash_notes_memory_init+0x0/0x35()
[   16.767527] initcall 0x40883507: crash_notes_memory_init+0x0/0x35() returned 0.
[   16.774806] initcall 0x40883507 ran for 0 msecs: crash_notes_memory_init+0x0/0x35()
[   16.782435] Calling initcall 0x40883b77: ikconfig_init+0x0/0x37()
[   16.788500] initcall 0x40883b77: ikconfig_init+0x0/0x37() returned 0.
[   16.794911] initcall 0x40883b77 ran for 0 msecs: ikconfig_init+0x0/0x37()
[   16.801674] Calling initcall 0x40883c1c: audit_init+0x0/0x11c()
[   16.807564] audit: initializing netlink socket (disabled)
[   16.812972] audit(1194987611.329:1): initialized
[   16.817539] initcall 0x40883c1c: audit_init+0x0/0x11c() returned 0.
[   16.823772] initcall 0x40883c1c ran for 9 msecs: audit_init+0x0/0x11c()
[   16.830359] Calling initcall 0x40883dac: audit_tree_init+0x0/0x37()
[   16.836597] initcall 0x40883dac: audit_tree_init+0x0/0x37() returned 0.
[   16.843184] initcall 0x40883dac ran for 0 msecs: audit_tree_init+0x0/0x37()
[   16.850118] Calling initcall 0x40883f4e: relay_init+0x0/0x3()
[   16.855834] initcall 0x40883f4e: relay_init+0x0/0x3() returned 0.
[   16.861904] initcall 0x40883f4e ran for 0 msecs: relay_init+0x0/0x3()
[   16.868315] Calling initcall 0x40883f51: utsname_sysctl_init+0x0/0xd()
[   16.874839] initcall 0x40883f51: utsname_sysctl_init+0x0/0xd() returned 0.
[   16.881662] initcall 0x40883f51 ran for 0 msecs: utsname_sysctl_init+0x0/0xd()
[   16.888857] Calling initcall 0x408853ef: init_per_zone_pages_min+0x0/0x38()
[   16.895831] initcall 0x408853ef: init_per_zone_pages_min+0x0/0x38() returned 0.
[   16.903065] initcall 0x408853ef ran for 0 msecs: init_per_zone_pages_min+0x0/0x38()
[   16.910694] Calling initcall 0x408858e2: pdflush_init+0x0/0x12()
[   16.916756] initcall 0x408858e2: pdflush_init+0x0/0x12() returned 0.
[   16.922997] initcall 0x408858e2 ran for 0 msecs: pdflush_init+0x0/0x12()
[   16.929673] Calling initcall 0x40885914: kswapd_init+0x0/0xf()
[   16.935513] initcall 0x40885914: kswapd_init+0x0/0xf() returned 0.
[   16.941631] initcall 0x40885914 ran for 0 msecs: kswapd_init+0x0/0xf()
[   16.948131] Calling initcall 0x408859e2: init_emergency_pool+0x0/0x65()
[   16.954716] initcall 0x408859e2: init_emergency_pool+0x0/0x65() returned 0.
[   16.961651] initcall 0x408859e2 ran for 0 msecs: init_emergency_pool+0x0/0x65()
[   16.968933] Calling initcall 0x40885a47: init_tmpfs+0x0/0xbf()
[   16.974783] initcall 0x40885a47: init_tmpfs+0x0/0xbf() returned 0.
[   16.980889] initcall 0x40885a47 ran for 0 msecs: init_tmpfs+0x0/0xbf()
[   16.987389] Calling initcall 0x40885bb1: fasync_init+0x0/0x2d()
[   16.993280] initcall 0x40885bb1: fasync_init+0x0/0x2d() returned 0.
[   16.999522] initcall 0x40885bb1 ran for 0 msecs: fasync_init+0x0/0x2d()
[   17.006107] Calling initcall 0x40886113: aio_setup+0x0/0x72()
[   17.011866] initcall 0x40886113: aio_setup+0x0/0x72() returned 0.
[   17.017894] initcall 0x40886113 ran for 0 msecs: aio_setup+0x0/0x72()
[   17.024306] Calling initcall 0x408862f2: inotify_setup+0x0/0xd()
[   17.030284] initcall 0x408862f2: inotify_setup+0x0/0xd() returned 0.
[   17.036610] initcall 0x408862f2 ran for 0 msecs: inotify_setup+0x0/0xd()
[   17.043285] Calling initcall 0x4088631d: init_mbcache+0x0/0xd()
[   17.049177] initcall 0x4088631d: init_mbcache+0x0/0xd() returned 0.
[   17.055418] initcall 0x4088631d ran for 0 msecs: init_mbcache+0x0/0xd()
[   17.062004] Calling initcall 0x4088632a: dquot_init+0x0/0xdb()
[   17.067808] VFS: Disk quotas dquot_6.5.1
[   17.071758] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   17.078214] initcall 0x4088632a: dquot_init+0x0/0xdb() returned 0.
[   17.084359] initcall 0x4088632a ran for 9 msecs: dquot_init+0x0/0xdb()
[   17.090859] Calling initcall 0x40886405: init_v1_quota_format+0x0/0xa()
[   17.097446] initcall 0x40886405: init_v1_quota_format+0x0/0xa() returned 0.
[   17.104379] initcall 0x40886405 ran for 0 msecs: init_v1_quota_format+0x0/0xa()
[   17.111661] Calling initcall 0x4088640f: init_v2_quota_format+0x0/0xa()
[   17.118244] initcall 0x4088640f: init_v2_quota_format+0x0/0xa() returned 0.
[   17.125181] initcall 0x4088640f ran for 0 msecs: init_v2_quota_format+0x0/0xa()
[   17.132459] Calling initcall 0x40886796: vmcore_init+0x0/0x9c1()
[   17.138437] initcall 0x40886796: vmcore_init+0x0/0x9c1() returned 0.
[   17.144766] initcall 0x40886796 ran for 0 msecs: vmcore_init+0x0/0x9c1()
[   17.151438] Calling initcall 0x40887210: configfs_init+0x0/0xa3()
[   17.157600] initcall 0x40887210: configfs_init+0x0/0xa3() returned 0.
[   17.163917] initcall 0x40887210 ran for 0 msecs: configfs_init+0x0/0xa3()
[   17.170677] Calling initcall 0x408872b3: init_devpts_fs+0x0/0x2e()
[   17.176900] initcall 0x408872b3: init_devpts_fs+0x0/0x2e() returned 0.
[   17.183329] initcall 0x408872b3 ran for 0 msecs: init_devpts_fs+0x0/0x2e()
[   17.190175] Calling initcall 0x408872e1: init_ext3_fs+0x0/0x61()
[   17.196166] initcall 0x408872e1: init_ext3_fs+0x0/0x61() returned 0.
[   17.202479] initcall 0x408872e1 ran for 0 msecs: init_ext3_fs+0x0/0x61()
[   17.209157] Calling initcall 0x40887375: init_ext4_fs+0x0/0x61()
[   17.215139] initcall 0x40887375: init_ext4_fs+0x0/0x61() returned 0.
[   17.221461] initcall 0x40887375 ran for 0 msecs: init_ext4_fs+0x0/0x61()
[   17.228134] Calling initcall 0x40887483: journal_init+0x0/0xc5()
[   17.234554] initcall 0x40887483: journal_init+0x0/0xc5() returned 0.
[   17.240865] initcall 0x40887483 ran for 0 msecs: journal_init+0x0/0xc5()
[   17.247536] Calling initcall 0x408875c2: journal_init+0x0/0xc4()
[   17.253516] initcall 0x408875c2: journal_init+0x0/0xc4() returned 0.
[   17.259843] initcall 0x408875c2 ran for 0 msecs: journal_init+0x0/0xc4()
[   17.266516] Calling initcall 0x40887686: init_ext2_fs+0x0/0x61()
[   17.272497] initcall 0x40887686: init_ext2_fs+0x0/0x61() returned 0.
[   17.278819] initcall 0x40887686 ran for 0 msecs: init_ext2_fs+0x0/0x61()
[   17.285495] Calling initcall 0x4088771a: init_ramfs_fs+0x0/0xa()
[   17.291473] initcall 0x4088771a: init_ramfs_fs+0x0/0xa() returned 0.
[   17.297801] initcall 0x4088771a ran for 0 msecs: init_ramfs_fs+0x0/0xa()
[   17.304474] Calling initcall 0x40887786: init_fat_fs+0x0/0x48()
[   17.310365] initcall 0x40887786: init_fat_fs+0x0/0x48() returned 0.
[   17.316603] initcall 0x40887786 ran for 0 msecs: init_fat_fs+0x0/0x48()
[   17.323192] Calling initcall 0x408877ce: init_vfat_fs+0x0/0xa()
[   17.329083] initcall 0x408877ce: init_vfat_fs+0x0/0xa() returned 0.
[   17.335324] initcall 0x408877ce ran for 0 msecs: init_vfat_fs+0x0/0xa()
[   17.341911] Calling initcall 0x408877d8: init_bfs_fs+0x0/0x51()
[   17.347803] initcall 0x408877d8: init_bfs_fs+0x0/0x51() returned 0.
[   17.354040] initcall 0x408877d8 ran for 0 msecs: init_bfs_fs+0x0/0x51()
[   17.360630] Calling initcall 0x40887829: init_hfsplus_fs+0x0/0x52()
[   17.366868] initcall 0x40887829: init_hfsplus_fs+0x0/0x52() returned 0.
[   17.373455] initcall 0x40887829 ran for 0 msecs: init_hfsplus_fs+0x0/0x52()
[   17.380388] Calling initcall 0x4088787b: init_hfs_fs+0x0/0x52()
[   17.386280] initcall 0x4088787b: init_hfs_fs+0x0/0x52() returned 0.
[   17.392518] initcall 0x4088787b ran for 0 msecs: init_hfs_fs+0x0/0x52()
[   17.399105] Calling initcall 0x408878cd: vxfs_init+0x0/0x52()
[   17.404829] initcall 0x408878cd: vxfs_init+0x0/0x52() returned 0.
[   17.410890] initcall 0x408878cd ran for 0 msecs: vxfs_init+0x0/0x52()
[   17.417306] Calling initcall 0x4088791f: init_nls_cp437+0x0/0xa()
[   17.423378] initcall 0x4088791f: init_nls_cp437+0x0/0xa() returned 0.
[   17.429786] initcall 0x4088791f ran for 0 msecs: init_nls_cp437+0x0/0xa()
[   17.436545] Calling initcall 0x40887929: init_nls_cp737+0x0/0xa()
[   17.442609] initcall 0x40887929: init_nls_cp737+0x0/0xa() returned 0.
[   17.449025] initcall 0x40887929 ran for 0 msecs: init_nls_cp737+0x0/0xa()
[   17.455784] Calling initcall 0x40887933: init_nls_cp775+0x0/0xa()
[   17.461848] initcall 0x40887933: init_nls_cp775+0x0/0xa() returned 0.
[   17.468263] initcall 0x40887933 ran for 0 msecs: init_nls_cp775+0x0/0xa()
[   17.475020] Calling initcall 0x4088793d: init_nls_cp855+0x0/0xa()
[   17.481086] initcall 0x4088793d: init_nls_cp855+0x0/0xa() returned 0.
[   17.487501] initcall 0x4088793d ran for 0 msecs: init_nls_cp855+0x0/0xa()
[   17.494261] Calling initcall 0x40887947: init_nls_cp857+0x0/0xa()
[   17.500326] initcall 0x40887947: init_nls_cp857+0x0/0xa() returned 0.
[   17.506738] initcall 0x40887947 ran for 0 msecs: init_nls_cp857+0x0/0xa()
[   17.513500] Calling initcall 0x40887951: init_nls_cp863+0x0/0xa()
[   17.519564] initcall 0x40887951: init_nls_cp863+0x0/0xa() returned 0.
[   17.525977] initcall 0x40887951 ran for 0 msecs: init_nls_cp863+0x0/0xa()
[   17.532739] Calling initcall 0x4088795b: init_nls_cp864+0x0/0xa()
[   17.538802] initcall 0x4088795b: init_nls_cp864+0x0/0xa() returned 0.
[   17.545219] initcall 0x4088795b ran for 0 msecs: init_nls_cp864+0x0/0xa()
[   17.551978] Calling initcall 0x40887965: init_nls_cp866+0x0/0xa()
[   17.558042] initcall 0x40887965: init_nls_cp866+0x0/0xa() returned 0.
[   17.564455] initcall 0x40887965 ran for 0 msecs: init_nls_cp866+0x0/0xa()
[   17.571216] Calling initcall 0x4088796f: init_nls_cp869+0x0/0xa()
[   17.577281] initcall 0x4088796f: init_nls_cp869+0x0/0xa() returned 0.
[   17.583696] initcall 0x4088796f ran for 0 msecs: init_nls_cp869+0x0/0xa()
[   17.590456] Calling initcall 0x40887979: init_nls_cp874+0x0/0xa()
[   17.596519] initcall 0x40887979: init_nls_cp874+0x0/0xa() returned 0.
[   17.602932] initcall 0x40887979 ran for 0 msecs: init_nls_cp874+0x0/0xa()
[   17.609694] Calling initcall 0x40887983: init_nls_cp949+0x0/0xa()
[   17.615757] initcall 0x40887983: init_nls_cp949+0x0/0xa() returned 0.
[   17.622170] initcall 0x40887983 ran for 0 msecs: init_nls_cp949+0x0/0xa()
[   17.628935] Calling initcall 0x4088798d: init_nls_cp950+0x0/0xa()
[   17.634997] initcall 0x4088798d: init_nls_cp950+0x0/0xa() returned 0.
[   17.641412] initcall 0x4088798d ran for 0 msecs: init_nls_cp950+0x0/0xa()
[   17.648171] Calling initcall 0x40887997: init_nls_cp1250+0x0/0xa()
[   17.654322] initcall 0x40887997: init_nls_cp1250+0x0/0xa() returned 0.
[   17.660825] initcall 0x40887997 ran for 0 msecs: init_nls_cp1250+0x0/0xa()
[   17.667671] Calling initcall 0x408879a1: init_nls_ascii+0x0/0xa()
[   17.673735] initcall 0x408879a1: init_nls_ascii+0x0/0xa() returned 0.
[   17.680149] initcall 0x408879a1 ran for 0 msecs: init_nls_ascii+0x0/0xa()
[   17.686909] Calling initcall 0x408879ab: init_nls_iso8859_6+0x0/0xa()
[   17.693320] initcall 0x408879ab: init_nls_iso8859_6+0x0/0xa() returned 0.
[   17.700081] initcall 0x408879ab ran for 0 msecs: init_nls_iso8859_6+0x0/0xa()
[   17.707191] Calling initcall 0x408879b5: init_nls_cp1255+0x0/0xa()
[   17.713338] initcall 0x408879b5: init_nls_cp1255+0x0/0xa() returned 0.
[   17.719840] initcall 0x408879b5 ran for 0 msecs: init_nls_cp1255+0x0/0xa()
[   17.726686] Calling initcall 0x408879bf: init_nls_iso8859_9+0x0/0xa()
[   17.733097] initcall 0x408879bf: init_nls_iso8859_9+0x0/0xa() returned 0.
[   17.739864] initcall 0x408879bf ran for 0 msecs: init_nls_iso8859_9+0x0/0xa()
[   17.746965] Calling initcall 0x408879c9: init_nls_iso8859_13+0x0/0xa()
[   17.753462] initcall 0x408879c9: init_nls_iso8859_13+0x0/0xa() returned 0.
[   17.760311] initcall 0x408879c9 ran for 0 msecs: init_nls_iso8859_13+0x0/0xa()
[   17.767503] Calling initcall 0x408879d3: init_nls_iso8859_14+0x0/0xa()
[   17.774002] initcall 0x408879d3: init_nls_iso8859_14+0x0/0xa() returned 0.
[   17.780850] initcall 0x408879d3 ran for 0 msecs: init_nls_iso8859_14+0x0/0xa()
[   17.788042] Calling initcall 0x408879dd: init_nls_iso8859_15+0x0/0xa()
[   17.794540] initcall 0x408879dd: init_nls_iso8859_15+0x0/0xa() returned 0.
[   17.801389] initcall 0x408879dd ran for 0 msecs: init_nls_iso8859_15+0x0/0xa()
[   17.808581] Calling initcall 0x408879e7: init_nls_koi8_u+0x0/0xa()
[   17.814732] initcall 0x408879e7: init_nls_koi8_u+0x0/0xa() returned 0.
[   17.821235] initcall 0x408879e7 ran for 0 msecs: init_nls_koi8_u+0x0/0xa()
[   17.828080] Calling initcall 0x408879f1: init_nls_koi8_ru+0x0/0x35()
[   17.834405] initcall 0x408879f1: init_nls_koi8_ru+0x0/0x35() returned 0.
[   17.841079] initcall 0x408879f1 ran for 0 msecs: init_nls_koi8_ru+0x0/0x35()
[   17.848098] Calling initcall 0x40887a26: init_nls_utf8+0x0/0x1a()
[   17.854164] initcall 0x40887a26: init_nls_utf8+0x0/0x1a() returned 0.
[   17.860575] initcall 0x40887a26 ran for 0 msecs: init_nls_utf8+0x0/0x1a()
[   17.867337] Calling initcall 0x40887a73: init_sysv_fs+0x0/0x3f()
[   17.873317] initcall 0x40887a73: init_sysv_fs+0x0/0x3f() returned 0.
[   17.879644] initcall 0x40887a73 ran for 0 msecs: init_sysv_fs+0x0/0x3f()
[   17.886317] Calling initcall 0x40887ab2: init_ntfs_fs+0x0/0x22c()
[   17.892380] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[   17.897164] initcall 0x40887ab2: init_ntfs_fs+0x0/0x22c() returned 0.
[   17.903562] initcall 0x40887ab2 ran for 4 msecs: init_ntfs_fs+0x0/0x22c()
[   17.910322] Calling initcall 0x40887cde: init_efs_fs+0x0/0x5d()
[   17.916212] EFS: 1.0a - http://aeschi.ch.eu.org/efs/
[   17.921159] initcall 0x40887cde: init_efs_fs+0x0/0x5d() returned 0.
[   17.927393] initcall 0x40887cde ran for 4 msecs: init_efs_fs+0x0/0x5d()
[   17.933980] Calling initcall 0x40887d3b: init_affs_fs+0x0/0x51()
[   17.939960] initcall 0x40887d3b: init_affs_fs+0x0/0x51() returned 0.
[   17.946284] initcall 0x40887d3b ran for 0 msecs: init_affs_fs+0x0/0x51()
[   17.952961] Calling initcall 0x40887d8c: init_qnx4_fs+0x0/0x61()
[   17.958937] QNX4 filesystem 0.2.3 registered.
[   17.963275] initcall 0x40887d8c: init_qnx4_fs+0x0/0x61() returned 0.
[   17.969598] initcall 0x40887d8c ran for 4 msecs: init_qnx4_fs+0x0/0x61()
[   17.976271] Calling initcall 0x40887ded: init_autofs_fs+0x0/0xa()
[   17.982336] initcall 0x40887ded: init_autofs_fs+0x0/0xa() returned 0.
[   17.988750] initcall 0x40887ded ran for 0 msecs: init_autofs_fs+0x0/0xa()
[   17.995509] Calling initcall 0x40887df7: init_autofs4_fs+0x0/0xa()
[   18.001661] initcall 0x40887df7: init_autofs4_fs+0x0/0xa() returned -16.
[   18.008335] initcall 0x40887df7 ran for 0 msecs: init_autofs4_fs+0x0/0xa()
[   18.015182] initcall at 0x40887df7: init_autofs4_fs+0x0/0xa(): returned with error code -16
[   18.023503] Calling initcall 0x40887e01: init_udf_fs+0x0/0x51()
[   18.029394] initcall 0x40887e01: init_udf_fs+0x0/0x51() returned 0.
[   18.035634] initcall 0x40887e01 ran for 0 msecs: init_udf_fs+0x0/0x51()
[   18.042220] Calling initcall 0x40887f11: init_xfs_fs+0x0/0x59()
[   18.048111] SGI XFS with ACLs, realtime, large block numbers, no debug enabled
[   18.055552] SGI XFS Quota Management subsystem
[   18.059884] initcall 0x40887f11: init_xfs_fs+0x0/0x59() returned 0.
[   18.066110] initcall 0x40887f11 ran for 11 msecs: init_xfs_fs+0x0/0x59()
[   18.072788] Calling initcall 0x40887fa3: ipc_init+0x0/0x12()
[   18.078426] initcall 0x40887fa3: ipc_init+0x0/0x12() returned 0.
[   18.084395] initcall 0x40887fa3 ran for 0 msecs: ipc_init+0x0/0x12()
[   18.090722] Calling initcall 0x408880a9: ipc_sysctl_init+0x0/0xd()
[   18.096919] initcall 0x408880a9: ipc_sysctl_init+0x0/0xd() returned 0.
[   18.103376] initcall 0x408880a9 ran for 0 msecs: ipc_sysctl_init+0x0/0xd()
[   18.110224] Calling initcall 0x408881dd: selinux_nf_ip_init+0x0/0x3b()
[   18.116721] initcall 0x408881dd: selinux_nf_ip_init+0x0/0x3b() returned 0.
[   18.123568] initcall 0x408881dd ran for 0 msecs: selinux_nf_ip_init+0x0/0x3b()
[   18.130762] Calling initcall 0x40888315: init_sel_fs+0x0/0x59()
[   18.136653] initcall 0x40888315: init_sel_fs+0x0/0x59() returned 0.
[   18.142892] initcall 0x40888315 ran for 0 msecs: init_sel_fs+0x0/0x59()
[   18.149481] Calling initcall 0x4088836e: selnl_init+0x0/0x58()
[   18.155292] initcall 0x4088836e: selnl_init+0x0/0x58() returned 0.
[   18.161440] initcall 0x4088836e ran for 0 msecs: selnl_init+0x0/0x58()
[   18.167939] Calling initcall 0x408883c6: sel_netif_init+0x0/0x6c()
[   18.174090] initcall 0x408883c6: sel_netif_init+0x0/0x6c() returned 0.
[   18.180589] initcall 0x408883c6 ran for 0 msecs: sel_netif_init+0x0/0x6c()
[   18.187438] Calling initcall 0x40888432: aurule_init+0x0/0x45()
[   18.193329] initcall 0x40888432: aurule_init+0x0/0x45() returned 0.
[   18.199571] initcall 0x40888432 ran for 0 msecs: aurule_init+0x0/0x45()
[   18.206157] Calling initcall 0x408884f8: crypto_algapi_init+0x0/0x8()
[   18.212569] initcall 0x408884f8: crypto_algapi_init+0x0/0x8() returned 0.
[   18.219329] initcall 0x408884f8 ran for 0 msecs: crypto_algapi_init+0x0/0x8()
[   18.226436] Calling initcall 0x4088851a: cryptomgr_init+0x0/0xa()
[   18.232501] initcall 0x4088851a: cryptomgr_init+0x0/0xa() returned 0.
[   18.238912] initcall 0x4088851a ran for 0 msecs: cryptomgr_init+0x0/0xa()
[   18.245675] Calling initcall 0x40888524: hmac_module_init+0x0/0xa()
[   18.251928] initcall 0x40888524: hmac_module_init+0x0/0xa() returned 0.
[   18.258498] initcall 0x40888524 ran for 0 msecs: hmac_module_init+0x0/0xa()
[   18.265436] Calling initcall 0x4088852e: crypto_xcbc_module_init+0x0/0xa()
[   18.272278] initcall 0x4088852e: crypto_xcbc_module_init+0x0/0xa() returned 0.
[   18.279472] initcall 0x4088852e ran for 0 msecs: crypto_xcbc_module_init+0x0/0xa()
[   18.287012] Calling initcall 0x40888538: init+0x0/0x49()
[   18.292298] initcall 0x40888538: init+0x0/0x49() returned 0.
[   18.297931] initcall 0x40888538 ran for 0 msecs: init+0x0/0x49()
[   18.303911] Calling initcall 0x40888581: init+0x0/0xa()
[   18.309109] initcall 0x40888581: init+0x0/0xa() returned 0.
[   18.314654] initcall 0x40888581 ran for 0 msecs: init+0x0/0xa()
[   18.320547] Calling initcall 0x4088858b: init+0x0/0xa()
[   18.325748] initcall 0x4088858b: init+0x0/0xa() returned 0.
[   18.331729] initcall 0x4088858b ran for 0 msecs: init+0x0/0xa()
[   18.337622] Calling initcall 0x40888595: init+0x0/0xa()
[   18.342820] initcall 0x40888595: init+0x0/0xa() returned 0.
[   18.348365] initcall 0x40888595 ran for 0 msecs: init+0x0/0xa()
[   18.354259] Calling initcall 0x4088859f: init+0x0/0x4e()
[   18.359548] initcall 0x4088859f: init+0x0/0x4e() returned 0.
[   18.365180] initcall 0x4088859f ran for 0 msecs: init+0x0/0x4e()
[   18.371160] Calling initcall 0x408885ed: init+0x0/0x4e()
[   18.376447] initcall 0x408885ed: init+0x0/0x4e() returned 0.
[   18.382077] initcall 0x408885ed ran for 0 msecs: init+0x0/0x4e()
[   18.388058] Calling initcall 0x4088863b: crypto_ecb_module_init+0x0/0xa()
[   18.394816] initcall 0x4088863b: crypto_ecb_module_init+0x0/0xa() returned 0.
[   18.401924] initcall 0x4088863b ran for 0 msecs: crypto_ecb_module_init+0x0/0xa()
[   18.409379] Calling initcall 0x40888645: crypto_cbc_module_init+0x0/0xa()
[   18.416135] initcall 0x40888645: crypto_cbc_module_init+0x0/0xa() returned 0.
[   18.423243] initcall 0x40888645 ran for 0 msecs: crypto_cbc_module_init+0x0/0xa()
[   18.430697] Calling initcall 0x4088864f: crypto_pcbc_module_init+0x0/0xa()
[   18.437541] initcall 0x4088864f: crypto_pcbc_module_init+0x0/0xa() returned 0.
[   18.444732] initcall 0x4088864f ran for 0 msecs: crypto_pcbc_module_init+0x0/0xa()
[   18.452275] Calling initcall 0x40888659: crypto_module_init+0x0/0xa()
[   18.458686] initcall 0x40888659: crypto_module_init+0x0/0xa() returned 0.
[   18.465447] initcall 0x40888659 ran for 0 msecs: crypto_module_init+0x0/0xa()
[   18.472553] Calling initcall 0x40888663: cryptd_init+0x0/0xa0()
[   18.478486] initcall 0x40888663: cryptd_init+0x0/0xa0() returned 0.
[   18.484683] initcall 0x40888663 ran for 0 msecs: cryptd_init+0x0/0xa0()
[   18.491272] Calling initcall 0x40888703: init+0x0/0x2f()
[   18.496558] initcall 0x40888703: init+0x0/0x2f() returned 0.
[   18.502190] initcall 0x40888703 ran for 0 msecs: init+0x0/0x2f()
[   18.508171] Calling initcall 0x40888732: init+0x0/0xa()
[   18.513369] initcall 0x40888732: init+0x0/0xa() returned 0.
[   18.518915] initcall 0x40888732 ran for 0 msecs: init+0x0/0xa()
[   18.524810] Calling initcall 0x4088873c: init+0x0/0xa()
[   18.530009] initcall 0x4088873c: init+0x0/0xa() returned 0.
[   18.535556] initcall 0x4088873c ran for 0 msecs: init+0x0/0xa()
[   18.541449] Calling initcall 0x40888746: init+0x0/0xa()
[   18.546648] initcall 0x40888746: init+0x0/0xa() returned 0.
[   18.552195] initcall 0x40888746 ran for 0 msecs: init+0x0/0xa()
[   18.558088] Calling initcall 0x40888750: arc4_init+0x0/0xa()
[   18.563719] initcall 0x40888750: arc4_init+0x0/0xa() returned 0.
[   18.569701] initcall 0x40888750 ran for 0 msecs: arc4_init+0x0/0xa()
[   18.576027] Calling initcall 0x4088875a: init+0x0/0x4e()
[   18.581314] initcall 0x4088875a: init+0x0/0x4e() returned 0.
[   18.586944] initcall 0x4088875a ran for 0 msecs: init+0x0/0x4e()
[   18.592926] Calling initcall 0x408887a8: seed_init+0x0/0xa()
[   18.598557] initcall 0x408887a8: seed_init+0x0/0xa() returned 0.
[   18.604536] initcall 0x408887a8 ran for 0 msecs: seed_init+0x0/0xa()
[   18.610862] Calling initcall 0x408887b2: init+0x0/0xa()
[   18.616064] initcall 0x408887b2: init+0x0/0xa() returned 0.
[   18.621611] initcall 0x408887b2 ran for 0 msecs: init+0x0/0xa()
[   18.627503] Calling initcall 0x408887bc: michael_mic_init+0x0/0xa()
[   18.633742] initcall 0x408887bc: michael_mic_init+0x0/0xa() returned 0.
[   18.640327] initcall 0x408887bc ran for 0 msecs: michael_mic_init+0x0/0xa()
[   18.647263] Calling initcall 0x40888a63: bsg_init+0x0/0x109()
[   18.653106] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   18.660396] initcall 0x40888a63: bsg_init+0x0/0x109() returned 0.
[   18.666456] initcall 0x40888a63 ran for 7 msecs: bsg_init+0x0/0x109()
[   18.672873] Calling initcall 0x40888b6c: noop_init+0x0/0xa()
[   18.678512] io scheduler noop registered
[   18.682407] initcall 0x40888b6c: noop_init+0x0/0xa() returned 0.
[   18.688381] initcall 0x40888b6c ran for 3 msecs: noop_init+0x0/0xa()
[   18.694707] Calling initcall 0x40888b76: as_init+0x0/0xa()
[   18.700168] io scheduler anticipatory registered (default)
[   18.705631] initcall 0x40888b76: as_init+0x0/0xa() returned 0.
[   18.711435] initcall 0x40888b76 ran for 5 msecs: as_init+0x0/0xa()
[   18.717588] Calling initcall 0x40888b80: blk_trace_init+0x0/0x4d()
[   18.723739] initcall 0x40888b80: blk_trace_init+0x0/0x4d() returned 0.
[   18.730238] initcall 0x40888b80 ran for 0 msecs: blk_trace_init+0x0/0x4d()
[   18.737089] Calling initcall 0x40888cc4: audit_classes_init+0x0/0x4b()
[   18.743589] initcall 0x40888cc4: audit_classes_init+0x0/0x4b() returned 0.
[   18.750430] initcall 0x40888cc4 ran for 0 msecs: audit_classes_init+0x0/0x4b()
[   18.757628] Calling initcall 0x402e4d57: pci_init+0x0/0x28()
[   18.775919] Boot video device is 0000:01:00.0
[   18.780159] initcall 0x402e4d57: pci_init+0x0/0x28() returned 0.
[   18.786125] initcall 0x402e4d57 ran for 16 msecs: pci_init+0x0/0x28()
[   18.792542] Calling initcall 0x40889281: pci_proc_init+0x0/0x5b()
[   18.798666] initcall 0x40889281: pci_proc_init+0x0/0x5b() returned 0.
[   18.805021] initcall 0x40889281 ran for 0 msecs: pci_proc_init+0x0/0x5b()
[   18.811780] Calling initcall 0x408892dc: pcie_portdrv_init+0x0/0x43()
[   18.818474] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   18.824832] assign_interrupt_mode Found MSI capability
[   18.829853] Allocate Port Service[0000:00:0b.0:pcie00]
[   18.835358] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   18.841726] assign_interrupt_mode Found MSI capability
[   18.846745] Allocate Port Service[0000:00:0c.0:pcie00]
[   18.852240] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   18.858591] assign_interrupt_mode Found MSI capability
[   18.863616] Allocate Port Service[0000:00:0d.0:pcie00]
[   18.869104] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   18.875455] assign_interrupt_mode Found MSI capability
[   18.880482] Allocate Port Service[0000:00:0e.0:pcie00]
[   18.885923] initcall 0x408892dc: pcie_portdrv_init+0x0/0x43() returned 0.
[   18.892554] initcall 0x408892dc ran for 64 msecs: pcie_portdrv_init+0x0/0x43()
[   18.899750] Calling initcall 0x4088931f: aer_service_init+0x0/0x19()
[   18.906177] initcall 0x4088931f: aer_service_init+0x0/0x19() returned 0.
[   18.912750] initcall 0x4088931f ran for 0 msecs: aer_service_init+0x0/0x19()
[   18.919769] Calling initcall 0x40889338: pci_hotplug_init+0x0/0x53()
[   18.926186] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.931646] initcall 0x40889338: pci_hotplug_init+0x0/0x53() returned 0.
[   18.938312] initcall 0x40889338 ran for 5 msecs: pci_hotplug_init+0x0/0x53()
[   18.945337] Calling initcall 0x4088938b: dummyphp_init+0x0/0x4f()
[   18.951397] fakephp: Fake PCI Hot Plug Controller Driver
[   18.958621] initcall 0x4088938b: dummyphp_init+0x0/0x4f() returned 0.
[   18.964902] initcall 0x4088938b ran for 6 msecs: dummyphp_init+0x0/0x4f()
[   18.971661] Calling initcall 0x408893da: pcied_init+0x0/0x75()
[   18.977565] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   18.984058] initcall 0x408893da: pcied_init+0x0/0x75() returned 0.
[   18.990230] initcall 0x408893da ran for 6 msecs: pcied_init+0x0/0x75()
[   18.996733] Calling initcall 0x4088944f: shpcd_init+0x0/0x5b()
[   19.002657] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.009235] initcall 0x4088944f: shpcd_init+0x0/0x5b() returned 0.
[   19.015382] initcall 0x4088944f ran for 6 msecs: shpcd_init+0x0/0x5b()
[   19.021882] Calling initcall 0x40889673: cr_backlight_init+0x0/0x5f()
[   19.028524] INTEL CARILLO RANCH LPC not found.
[   19.032862] Carillo Ranch Backlight Driver Initialized.
[   19.038047] initcall 0x40889673: cr_backlight_init+0x0/0x5f() returned 0.
[   19.044795] initcall 0x40889673 ran for 9 msecs: cr_backlight_init+0x0/0x5f()
[   19.051901] Calling initcall 0x408896d2: display_class_init+0x0/0x6e()
[   19.058496] initcall 0x408896d2: display_class_init+0x0/0x6e() returned 0.
[   19.065247] initcall 0x408896d2 ran for 0 msecs: display_class_init+0x0/0x6e()
[   19.072440] Calling initcall 0x40889740: cyber2000fb_init+0x0/0xb6()
[   19.078883] initcall 0x40889740: cyber2000fb_init+0x0/0xb6() returned 0.
[   19.085439] initcall 0x40889740 ran for 0 msecs: cyber2000fb_init+0x0/0xb6()
[   19.092459] Calling initcall 0x408897f6: pm2fb_init+0x0/0x129()
[   19.098468] initcall 0x408897f6: pm2fb_init+0x0/0x129() returned 0.
[   19.104589] initcall 0x408897f6 ran for 0 msecs: pm2fb_init+0x0/0x129()
[   19.111177] Calling initcall 0x4088991f: pm3fb_init+0x0/0xe7()
[   19.117100] initcall 0x4088991f: pm3fb_init+0x0/0xe7() returned 0.
[   19.123144] initcall 0x4088991f ran for 0 msecs: pm3fb_init+0x0/0xe7()
[   19.129636] Calling initcall 0x40889a06: matroxfb_init+0x0/0x8a3()
[   19.135906] initcall 0x40889a06: matroxfb_init+0x0/0x8a3() returned 0.
[   19.142285] initcall 0x40889a06 ran for 0 msecs: matroxfb_init+0x0/0x8a3()
[   19.149138] Calling initcall 0x4030c3d7: nvidiafb_init+0x0/0x26e()
[   19.155405] initcall 0x4030c3d7: nvidiafb_init+0x0/0x26e() returned 0.
[   19.161787] initcall 0x4030c3d7 ran for 0 msecs: nvidiafb_init+0x0/0x26e()
[   19.168634] Calling initcall 0x4088a2a9: atyfb_init+0x0/0x1c1()
[   19.174661] initcall 0x4088a2a9: atyfb_init+0x0/0x1c1() returned 0.
[   19.180775] initcall 0x4088a2a9 ran for 0 msecs: atyfb_init+0x0/0x1c1()
[   19.187361] Calling initcall 0x4088a46a: vt8623fb_init+0x0/0x4c()
[   19.193546] initcall 0x4088a46a: vt8623fb_init+0x0/0x4c() returned 0.
[   19.199849] initcall 0x4088a46a ran for 0 msecs: vt8623fb_init+0x0/0x4c()
[   19.206600] Calling initcall 0x4088a4b6: vmlfb_init+0x0/0x82()
[   19.212404] vmlfb: initializing
[   19.215640] initcall 0x4088a4b6: vmlfb_init+0x0/0x82() returned 0.
[   19.221679] initcall 0x4088a4b6 ran for 3 msecs: vmlfb_init+0x0/0x82()
[   19.228178] Calling initcall 0x4088a538: s3fb_init+0x0/0xc1()
[   19.234016] initcall 0x4088a538: s3fb_init+0x0/0xc1() returned 0.
[   19.239973] initcall 0x4088a538 ran for 0 msecs: s3fb_init+0x0/0xc1()
[   19.246377] Calling initcall 0x4088a5f9: arkfb_init+0x0/0x4c()
[   19.252291] initcall 0x4088a5f9: arkfb_init+0x0/0x4c() returned 0.
[   19.258334] initcall 0x4088a5f9 ran for 0 msecs: arkfb_init+0x0/0x4c()
[   19.264839] Calling initcall 0x4088a645: hecubafb_init+0x0/0x6e()
[   19.270899] Use hecubafb_enable to enable the device
[   19.275845] initcall 0x4088a645: hecubafb_init+0x0/0x6e() returned -6.
[   19.282339] initcall 0x4088a645 ran for 4 msecs: hecubafb_init+0x0/0x6e()
[   19.289104] initcall at 0x4088a645: hecubafb_init+0x0/0x6e(): returned with error code -6
[   19.297250] Calling initcall 0x4088a6b3: hgafb_init+0x0/0x44()
[   19.303285] hgafb: HGA card not detected.
[   19.307191] hgafb: probe of hgafb.0 failed with error -22
[   19.312556] initcall 0x4088a6b3: hgafb_init+0x0/0x44() returned 0.
[   19.318694] initcall 0x4088a6b3 ran for 9 msecs: hgafb_init+0x0/0x44()
[   19.325195] Calling initcall 0x4088a9dd: s1d13xxxfb_init+0x0/0x20()
[   19.331538] initcall 0x4088a9dd: s1d13xxxfb_init+0x0/0x20() returned 0.
[   19.338019] initcall 0x4088a9dd ran for 0 msecs: s1d13xxxfb_init+0x0/0x20()
[   19.344958] Calling initcall 0x4031c870: sm501fb_init+0x0/0xa()
[   19.350953] initcall 0x4031c870: sm501fb_init+0x0/0xa() returned 0.
[   19.357088] initcall 0x4031c870 ran for 0 msecs: sm501fb_init+0x0/0xa()
[   19.363673] Calling initcall 0x4088b039: rand_initialize+0x0/0x21()
[   19.369933] initcall 0x4088b039: rand_initialize+0x0/0x21() returned 0.
[   19.376496] initcall 0x4088b039 ran for 0 msecs: rand_initialize+0x0/0x21()
[   19.383431] Calling initcall 0x4088b083: tty_init+0x0/0x1c8()
[   19.396508] initcall 0x4088b083: tty_init+0x0/0x1c8() returned 0.
[   19.402877] initcall 0x4088b083 ran for 7 msecs: tty_init+0x0/0x1c8()
[   19.409450] Calling initcall 0x4088b26e: pty_init+0x0/0x3a4()
[   19.427100] khelper used greatest stack depth: 3004 bytes left
[   19.484907] initcall 0x4088b26e: pty_init+0x0/0x3a4() returned 0.
[   19.490855] initcall 0x4088b26e ran for 66 msecs: pty_init+0x0/0x3a4()
[   19.497357] Calling initcall 0x4088bb98: cy_init+0x0/0xf0()
[   19.502902] Cyclades driver 2.5 (built Nov 13 2007 19:50:53)
[   19.508663] initcall 0x4088bb98: cy_init+0x0/0xf0() returned 0.
[   19.514427] initcall 0x4088bb98 ran for 5 msecs: cy_init+0x0/0xf0()
[   19.520710] Calling initcall 0x4088bc88: specialix_init_module+0x0/0x40a()
[   19.527574] sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998.
[   19.533992] sx: derived from work (c) D.Gorodchanin 1994-1996.
[   19.539798] sx: DTR/RTS pin is always RTS.
[   19.553035] sx0: specialix IO8+ Board at 0x100 not found.
[   19.558329] sx1: specialix IO8+ Board at 0x180 not found.
[   19.563837] sx2: specialix IO8+ Board at 0x250 not found.
[   19.569267] sx3: specialix IO8+ Board at 0x260 not found.
[   19.585242] sx: No specialix IO8+ boards detected.
[   19.590052] initcall 0x4088bc88: specialix_init_module+0x0/0x40a() returned -5.
[   19.597200] initcall 0x4088bc88 ran for 59 msecs: specialix_init_module+0x0/0x40a()
[   19.604828] initcall at 0x4088bc88: specialix_init_module+0x0/0x40a(): returned with error code -5
[   19.613754] Calling initcall 0x4088c092: moxa_init+0x0/0x203()
[   19.619555] MOXA Intellio family driver version 5.1k
[   19.645551] initcall 0x4088c092: moxa_init+0x0/0x203() returned 0.
[   19.651581] initcall 0x4088c092 ran for 24 msecs: moxa_init+0x0/0x203()
[   19.658166] Calling initcall 0x4088c295: mxser_module_init+0x0/0x5bd()
[   19.664664] MOXA Smartio/Industio family driver version 2.0.2
[   19.670516] initcall 0x4088c295: mxser_module_init+0x0/0x5bd() returned 0.
[   19.677231] initcall 0x4088c295 ran for 5 msecs: mxser_module_init+0x0/0x5bd()
[   19.684425] Calling initcall 0x4088c9a6: riscom8_init_module+0x0/0x474()
[   19.691097] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
[   19.703296] rc0: RISCom/8 Board at 0x220 not found.
[   19.708075] rc1: RISCom/8 Board at 0x240 not found.
[   19.713060] rc2: RISCom/8 Board at 0x250 not found.
[   19.717947] rc3: RISCom/8 Board at 0x260 not found.
[   19.728441] rc: No RISCom/8 boards detected.
[   19.732596] initcall 0x4088c9a6: riscom8_init_module+0x0/0x474() returned -5.
[   19.739706] initcall 0x4088c9a6 ran for 39 msecs: riscom8_init_module+0x0/0x474()
[   19.747160] initcall at 0x4088c9a6: riscom8_init_module+0x0/0x474(): returned with error code -5
[   19.755910] Calling initcall 0x4088ce1a: synclink_init+0x0/0x236()
[   19.762061] SyncLink serial driver $Revision: 4.38 $
[   19.790123] SyncLink serial driver $Revision: 4.38 $, tty major#252
[   19.796397] initcall 0x4088ce1a: synclink_init+0x0/0x236() returned 0.
[   19.802766] initcall 0x4088ce1a ran for 32 msecs: synclink_init+0x0/0x236()
[   19.809701] Calling initcall 0x4088d050: synclinkmp_init+0x0/0x169()
[   19.816025] SyncLink MultiPort driver $Revision: 4.38 $
[   19.847255] SyncLink MultiPort driver $Revision: 4.38 $, tty major#251
[   19.853791] initcall 0x4088d050: synclinkmp_init+0x0/0x169() returned 0.
[   19.860335] initcall 0x4088d050 ran for 36 msecs: synclinkmp_init+0x0/0x169()
[   19.867443] Calling initcall 0x4088d1b9: sx_init+0x0/0xd5()
[   19.873203] initcall 0x4088d1b9: sx_init+0x0/0xd5() returned 0.
[   19.878967] initcall 0x4088d1b9 ran for 0 msecs: sx_init+0x0/0xd5()
[   19.885274] Calling initcall 0x4088d28e: nvram_init+0x0/0x79()
[   19.891214] Non-volatile memory driver v1.2
[   19.895276] initcall 0x4088d28e: nvram_init+0x0/0x79() returned 0.
[   19.901424] initcall 0x4088d28e ran for 4 msecs: nvram_init+0x0/0x79()
[   19.907923] Calling initcall 0x4088d307: pc8736x_gpio_init+0x0/0x36c()
[   19.914523] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[   19.921541] platform pc8736x_gpio.0: no device found
[   19.926600] initcall 0x4088d307: pc8736x_gpio_init+0x0/0x36c() returned -19.
[   19.933489] initcall 0x4088d307 ran for 11 msecs: pc8736x_gpio_init+0x0/0x36c()
[   19.940771] Calling initcall 0x4088d673: nsc_gpio_init+0x0/0x13()
[   19.946831] nsc_gpio initializing
[   19.950129] initcall 0x4088d673: nsc_gpio_init+0x0/0x13() returned 0.
[   19.956538] initcall 0x4088d673 ran for 3 msecs: nsc_gpio_init+0x0/0x13()
[   19.963299] Calling initcall 0x4088d686: cs5535_gpio_init+0x0/0x162()
[   19.969713] cs5535_gpio: DIVIL not found
[   19.973615] initcall 0x4088d686: cs5535_gpio_init+0x0/0x162() returned -19.
[   19.980542] initcall 0x4088d686 ran for 3 msecs: cs5535_gpio_init+0x0/0x162()
[   19.987651] Calling initcall 0x4088d7e8: mwave_init+0x0/0x286()
[   19.993549] smapi::smapi_init, ERROR invalid usSmapiID
[   19.998661] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[   20.007934] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[   20.015126] mwave: mwavedd::mwave_init: Error: Failed to initialize
[   20.021365] initcall 0x4088d7e8: mwave_init+0x0/0x286() returned -5.
[   20.027689] initcall 0x4088d7e8 ran for 26 msecs: mwave_init+0x0/0x286()
[   20.034362] initcall at 0x4088d7e8: mwave_init+0x0/0x286(): returned with error code -5
[   20.042334] Calling initcall 0x4088dab4: agp_init+0x0/0x2e()
[   20.047965] Linux agpgart interface v0.102
[   20.052044] initcall 0x4088dab4: agp_init+0x0/0x2e() returned 0.
[   20.058018] initcall 0x4088dab4 ran for 3 msecs: agp_init+0x0/0x2e()
[   20.064346] Calling initcall 0x4088dae2: agp_ati_init+0x0/0x20()
[   20.070458] initcall 0x4088dae2: agp_ati_init+0x0/0x20() returned 0.
[   20.076649] initcall 0x4088dae2 ran for 0 msecs: agp_ati_init+0x0/0x20()
[   20.083325] Calling initcall 0x4088db02: agp_efficeon_init+0x0/0x35()
[   20.089844] initcall 0x4088db02: agp_efficeon_init+0x0/0x35() returned 0.
[   20.096495] initcall 0x4088db02 ran for 0 msecs: agp_efficeon_init+0x0/0x35()
[   20.103604] Calling initcall 0x4088db37: agp_intel_init+0x0/0x20()
[   20.109886] initcall 0x4088db37: agp_intel_init+0x0/0x20() returned 0.
[   20.116265] initcall 0x4088db37 ran for 0 msecs: agp_intel_init+0x0/0x20()
[   20.123102] Calling initcall 0x4088db57: agp_via_init+0x0/0x20()
[   20.129190] initcall 0x4088db57: agp_via_init+0x0/0x20() returned 0.
[   20.135415] initcall 0x4088db57 ran for 0 msecs: agp_via_init+0x0/0x20()
[   20.142081] Calling initcall 0x4088db77: synclink_cs_init+0x0/0x135()
[   20.148492] SyncLink PC Card driver $Revision: 4.34 $
[   20.154448] SyncLink PC Card driver $Revision: 4.34 $, tty major#250
[   20.160676] initcall 0x4088db77: synclink_cs_init+0x0/0x135() returned 0.
[   20.167430] initcall 0x4088db77 ran for 11 msecs: synclink_cs_init+0x0/0x135()
[   20.174623] Calling initcall 0x4088dcac: cmm_init+0x0/0x9e()
[   20.180253] cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte
[   20.186611] initcall 0x4088dcac: cmm_init+0x0/0x9e() returned 0.
[   20.192456] initcall 0x4088dcac ran for 6 msecs: cmm_init+0x0/0x9e()
[   20.198781] Calling initcall 0x4088dd4a: ipmi_init_msghandler_mod+0x0/0x8()
[   20.205846] ipmi message handler version 39.1
[   20.210085] initcall 0x4088dd4a: ipmi_init_msghandler_mod+0x0/0x8() returned 0.
[   20.217356] initcall 0x4088dd4a ran for 4 msecs: ipmi_init_msghandler_mod+0x0/0x8()
[   20.224984] Calling initcall 0x40369d05: init_ipmi_si+0x0/0x577()
[   20.231143] IPMI System Interface driver.
[   20.271253] ipmi_si: Unable to find any System Interface(s)
[   20.276697] initcall 0x40369d05: init_ipmi_si+0x0/0x577() returned -19.
[   20.283278] initcall 0x40369d05 ran for 43 msecs: init_ipmi_si+0x0/0x577()
[   20.290125] Calling initcall 0x4036cd5c: ipmi_poweroff_init+0x0/0x7c()
[   20.296622] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[   20.304298] initcall 0x4036cd5c: ipmi_poweroff_init+0x0/0x7c() returned 0.
[   20.311098] initcall 0x4036cd5c ran for 7 msecs: ipmi_poweroff_init+0x0/0x7c()
[   20.318290] Calling initcall 0x4088dd52: init_atmel+0x0/0x162()
[   20.324405] initcall 0x4088dd52: init_atmel+0x0/0x162() returned -19.
[   20.330688] initcall 0x4088dd52 ran for 0 msecs: init_atmel+0x0/0x162()
[   20.337278] Calling initcall 0x4036f51a: i810fb_init+0x0/0x358()
[   20.343364] initcall 0x4036f51a: i810fb_init+0x0/0x358() returned 0.
[   20.349583] initcall 0x4036f51a ran for 0 msecs: i810fb_init+0x0/0x358()
[   20.356256] Calling initcall 0x4088deb4: intelfb_init+0x0/0x520()
[   20.362320] intelfb: intelfb_init
[   20.365620] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
[   20.375584] intelfb: Version 0.9.4
[   20.378962] intelfb: intelfb_setup
[   20.382344] intelfb: no options
[   20.385614] initcall 0x4088deb4: intelfb_init+0x0/0x520() returned 0.
[   20.391910] initcall 0x4088deb4 ran for 22 msecs: intelfb_init+0x0/0x520()
[   20.398746] Calling initcall 0x4088e776: serial8250_init+0x0/0x111()
[   20.405071] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[   20.667294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   20.674335] initcall 0x4088e776: serial8250_init+0x0/0x111() returned 0.
[   20.680880] initcall 0x4088e776 ran for 256 msecs: serial8250_init+0x0/0x111()
[   20.688073] Calling initcall 0x4088e887: serial8250_pci_init+0x0/0x11()
[   20.694793] initcall 0x4088e887: serial8250_pci_init+0x0/0x11() returned 0.
[   20.701602] initcall 0x4088e887 ran for 0 msecs: serial8250_pci_init+0x0/0x11()
[   20.708883] Calling initcall 0x4088ec74: mca_init+0x0/0x19()
[   20.714510] initcall 0x4088ec74: mca_init+0x0/0x19() returned -19.
[   20.720663] initcall 0x4088ec74 ran for 0 msecs: mca_init+0x0/0x19()
[   20.726990] Calling initcall 0x4088ee28: sm501_base_init+0x0/0x1b()
[   20.733444] initcall 0x4088ee28: sm501_base_init+0x0/0x1b() returned 0.
[   20.739913] initcall 0x4088ee28 ran for 0 msecs: sm501_base_init+0x0/0x1b()
[   20.746838] Calling initcall 0x4088ee43: e1000_init_module+0x0/0x7c()
[   20.753248] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[   20.759235] Copyright (c) 1999-2006 Intel Corporation.
[   20.764502] initcall 0x4088ee43: e1000_init_module+0x0/0x7c() returned 0.
[   20.771146] initcall 0x4088ee43 ran for 10 msecs: e1000_init_module+0x0/0x7c()
[   20.778323] Calling initcall 0x4088eebf: e100_init_module+0x0/0x58()
[   20.784646] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[   20.790717] e100: Copyright(c) 1999-2006 Intel Corporation
[   20.796290] initcall 0x4088eebf: e100_init_module+0x0/0x58() returned 0.
[   20.802845] initcall 0x4088eebf ran for 11 msecs: e100_init_module+0x0/0x58()
[   20.809954] Calling initcall 0x4088ef56: net_olddevs_init+0x0/0x7d()
[   20.816281] initcall 0x4088ef56: net_olddevs_init+0x0/0x7d() returned 0.
[   20.822950] initcall 0x4088ef56 ran for 0 msecs: net_olddevs_init+0x0/0x7d()
[   20.829972] Calling initcall 0x4088f045: init_nic+0x0/0x11()
[   20.835740] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   20.843012] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   21.363817] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[   21.372070] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[   21.379020] initcall 0x4088f045: init_nic+0x0/0x11() returned 0.
[   21.384976] initcall 0x4088f045 ran for 518 msecs: init_nic+0x0/0x11()
[   21.391476] Calling initcall 0x4088f056: rtl8139_init_module+0x0/0x11()
[   21.398186] 8139too Fast Ethernet driver 0.9.28
[   21.403521] eth1: RealTek RTL8139 at 0x80802000, 00:c0:df:03:68:5d, IRQ 11
[   21.410269] eth1:  Identified 8139 chip type 'RTL-8139B'
[   21.415581] initcall 0x4088f056: rtl8139_init_module+0x0/0x11() returned 0.
[   21.422481] initcall 0x4088f056 ran for 16 msecs: rtl8139_init_module+0x0/0x11()
[   21.429849] Calling initcall 0x4088f0d4: mlx4_init+0x0/0x26()
[   21.435728] initcall 0x4088f0d4: mlx4_init+0x0/0x26() returned 0.
[   21.441670] initcall 0x4088f0d4 ran for 0 msecs: mlx4_init+0x0/0x26()
[   21.448084] Calling initcall 0x4088f111: init_netconsole+0x0/0x162()
[   21.454409] console [netcon0] enabled
[   26.467049] NMI watchdog detected lockup on CPU#0 (5000/5000)
[   26.467051] 
[   26.467053] Pid: 1, comm: swapper Not tainted (2.6.24-rc2 #183)
[   26.467055] EIP: 0060:[<40113507>] EFLAGS: 00000006 CPU: 0
[   26.467059] EIP is at early_serial_putc+0x17/0x2b
[   26.467061] EAX: 00000000 EBX: 0000ffc0 ECX: 000003f8 EDX: 000003fd
[   26.467063] ESI: 00000069 EDI: 4011351b EBP: 0000e819 ESP: 7f815f28
[   26.467065]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[   26.467067] CR0: 8005003b CR2: fff9b000 CR3: 008b5000 CR4: 000006c0
[   26.467070] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[   26.467071] DR6: ffff0ff0 DR7: 00000400
[   26.467073]  [<4011353a>] early_serial_write+0x1f/0x2e
[   26.467076]  [<4011f80e>] __call_console_drivers+0x34/0x40
[   26.467080]  [<4011fa7c>] release_console_sem+0x113/0x1c4
[   26.467083]  [<4088f22c>] init_netconsole+0x11b/0x162
[   26.467086]  [<40131f73>] ktime_get+0xf/0x2b
[   26.467089]  [<40873633>] kernel_init+0xc9/0x242
[   26.467093]  [<4088f111>] init_netconsole+0x0/0x162
[   26.467096]  [<4087356a>] kernel_init+0x0/0x242
[   26.467099]  [<40105a5b>] kernel_thread_helper+0x7/0x10
[   26.467102]  =======================
[   26.467104] NMI watchdog running again ...
[   28.721664] netconsole: network logging started
[   28.726172] initcall 0x4088f111: init_netconsole+0x0/0x162() returned 0.
[   28.732840] initcall 0x4088f111 ran for 6935 msecs: init_netconsole+0x0/0x162()
[   28.740120] Calling initcall 0x4088f273: mac_hid_init+0x0/0x72()
[   28.746303] input: Macintosh mouse button emulation as /class/input/input0
[   28.753093] initcall 0x4088f273: mac_hid_init+0x0/0x72() returned 0.
[   28.759376] initcall 0x4088f273 ran for 6 msecs: mac_hid_init+0x0/0x72()
[   28.766049] Calling initcall 0x4088f532: raid_init+0x0/0xa()
[   28.771784] initcall 0x4088f532: raid_init+0x0/0xa() returned 0.
[   28.777662] initcall 0x4088f532 ran for 0 msecs: raid_init+0x0/0xa()
[   28.783988] Calling initcall 0x4088f53c: spi_transport_init+0x0/0x23()
[   28.790768] initcall 0x4088f53c: spi_transport_init+0x0/0x23() returned 0.
[   28.797490] initcall 0x4088f53c ran for 0 msecs: spi_transport_init+0x0/0x23()
[   28.804686] Calling initcall 0x4088f55f: fc_transport_init+0x0/0x3f()
[   28.811529] initcall 0x4088f55f: fc_transport_init+0x0/0x3f() returned 0.
[   28.818155] initcall 0x4088f55f ran for 0 msecs: fc_transport_init+0x0/0x3f()
[   28.825268] Calling initcall 0x4088f59e: iscsi_transport_init+0x0/0xce()
[   28.831935] Loading iSCSI transport class v2.0-724.
[   28.837212] initcall 0x4088f59e: iscsi_transport_init+0x0/0xce() returned 0.
[   28.844102] initcall 0x4088f59e ran for 5 msecs: iscsi_transport_init+0x0/0xce()
[   28.851474] Calling initcall 0x4088f66c: sas_transport_init+0x0/0x9b()
[   28.858549] initcall 0x4088f66c: sas_transport_init+0x0/0x9b() returned 0.
[   28.865268] initcall 0x4088f66c ran for 0 msecs: sas_transport_init+0x0/0x9b()
[   28.872460] Calling initcall 0x4088f707: sas_class_init+0x0/0x33()
[   28.878612] initcall 0x4088f707: sas_class_init+0x0/0x33() returned 0.
[   28.885112] initcall 0x4088f707 ran for 0 msecs: sas_class_init+0x0/0x33()
[   28.891960] Calling initcall 0x4088f73a: srp_transport_init+0x0/0x2f()
[   28.898653] initcall 0x4088f73a: srp_transport_init+0x0/0x2f() returned 0.
[   28.905375] initcall 0x4088f73a ran for 0 msecs: srp_transport_init+0x0/0x2f()
[   28.912566] Calling initcall 0x4088f85c: init_st+0x0/0x155()
[   28.918199] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[   28.924653] initcall 0x4088f85c: init_st+0x0/0x155() returned 0.
[   28.930504] initcall 0x4088f85c ran for 6 msecs: init_st+0x0/0x155()
[   28.936833] Calling initcall 0x4088fa81: init_osst+0x0/0x11f()
[   28.942636] osst :I: Tape driver with OnStream support version 0.99.4
[   28.942638] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   28.955934] initcall 0x4088fa81: init_osst+0x0/0x11f() returned 0.
[   28.961953] initcall 0x4088fa81 ran for 12 msecs: init_osst+0x0/0x11f()
[   28.968542] Calling initcall 0x4088fba0: init_sd+0x0/0xad()
[   28.974324] initcall 0x4088fba0: init_sd+0x0/0xad() returned 0.
[   28.980091] initcall 0x4088fba0 ran for 0 msecs: init_sd+0x0/0xad()
[   28.986334] Calling initcall 0x4088fc4d: init_sg+0x0/0x13b()
[   28.992084] initcall 0x4088fc4d: init_sg+0x0/0x13b() returned 0.
[   28.997943] initcall 0x4088fc4d ran for 0 msecs: init_sg+0x0/0x13b()
[   29.004272] Calling initcall 0x4088fe01: ahci_init+0x0/0x11()
[   29.010172] initcall 0x4088fe01: ahci_init+0x0/0x11() returned 0.
[   29.016107] initcall 0x4088fe01 ran for 0 msecs: ahci_init+0x0/0x11()
[   29.022523] Calling initcall 0x4088fe12: k2_sata_init+0x0/0x11()
[   29.028621] initcall 0x4088fe12: k2_sata_init+0x0/0x11() returned 0.
[   29.034825] initcall 0x4088fe12 ran for 0 msecs: k2_sata_init+0x0/0x11()
[   29.041501] Calling initcall 0x4088fe23: piix_init+0x0/0x23()
[   29.047337] initcall 0x4088fe23: piix_init+0x0/0x23() returned 0.
[   29.053288] initcall 0x4088fe23 ran for 0 msecs: piix_init+0x0/0x23()
[   29.059700] Calling initcall 0x4088fe46: pdc_ata_init+0x0/0x11()
[   29.065801] initcall 0x4088fe46: pdc_ata_init+0x0/0x11() returned 0.
[   29.072016] initcall 0x4088fe46 ran for 0 msecs: pdc_ata_init+0x0/0x11()
[   29.078679] Calling initcall 0x4088fe57: qs_ata_init+0x0/0x11()
[   29.084693] initcall 0x4088fe57: qs_ata_init+0x0/0x11() returned 0.
[   29.090809] initcall 0x4088fe57 ran for 0 msecs: qs_ata_init+0x0/0x11()
[   29.097398] Calling initcall 0x4088fe68: sil_init+0x0/0x11()
[   29.103152] initcall 0x4088fe68: sil_init+0x0/0x11() returned 0.
[   29.109011] initcall 0x4088fe68 ran for 0 msecs: sil_init+0x0/0x11()
[   29.115338] Calling initcall 0x4088fe79: uli_init+0x0/0x11()
[   29.121085] initcall 0x4088fe79: uli_init+0x0/0x11() returned 0.
[   29.126960] initcall 0x4088fe79 ran for 0 msecs: uli_init+0x0/0x11()
[   29.133276] Calling initcall 0x4088fe8a: inic_init+0x0/0x11()
[   29.139119] initcall 0x4088fe8a: inic_init+0x0/0x11() returned 0.
[   29.145062] initcall 0x4088fe8a ran for 0 msecs: inic_init+0x0/0x11()
[   29.151475] Calling initcall 0x4088fe9b: ali_init+0x0/0x11()
[   29.157225] initcall 0x4088fe9b: ali_init+0x0/0x11() returned 0.
[   29.163098] initcall 0x4088fe9b ran for 0 msecs: ali_init+0x0/0x11()
[   29.169414] Calling initcall 0x4088feac: amd_init+0x0/0x11()
[   29.175161] pata_amd 0000:00:06.0: version 0.3.9
[   29.179779] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   29.186056] scsi0 : pata_amd
[   29.189009] scsi1 : pata_amd
[   29.191935] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   29.198771] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   29.210836] Clocksource tsc unstable (delta = 7296760089 ns)
[   29.218840] Time: pit clocksource has been installed.
[   29.367338] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[   29.373482] ata1.00: 488397168 sectors, multi 1: LBA48 
[   29.391271] ata1.00: configured for UDMA/100
[   29.723061] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[   29.728956] ata2.01: limited to UDMA/33 due to 40-wire cable
[   29.890987] ata2.01: configured for UDMA/33
[   29.895362] scsi 0:0:0:0: Direct-Access     ATA      HDS722525VLAT80  V36O PQ: 0 ANSI: 5
[   29.903954] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   29.910991] sd 0:0:0:0: [sda] Write Protect is off
[   29.915732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   29.920822] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.930102] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   29.937141] sd 0:0:0:0: [sda] Write Protect is off
[   29.941885] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   29.946954] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.955955]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[   30.051927] sd 0:0:0:0: [sda] Attached SCSI disk
[   30.056815] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   30.062759] scsi 1:0:1:0: CD-ROM            DVDRW    IDE 16X          A079 PQ: 0 ANSI: 5
[   30.071333] scsi 1:0:1:0: Attached scsi generic sg1 type 5
[   30.076886] initcall 0x4088feac: amd_init+0x0/0x11() returned 0.
[   30.083200] initcall 0x4088feac ran for 825 msecs: amd_init+0x0/0x11()
[   30.089669] Calling initcall 0x4088febd: artop_init+0x0/0x11()
[   30.095608] initcall 0x4088febd: artop_init+0x0/0x11() returned 0.
[   30.101638] initcall 0x4088febd ran for 0 msecs: artop_init+0x0/0x11()
[   30.108140] Calling initcall 0x4088fece: atiixp_init+0x0/0x11()
[   30.114152] initcall 0x4088fece: atiixp_init+0x0/0x11() returned 0.
[   30.120266] initcall 0x4088fece ran for 0 msecs: atiixp_init+0x0/0x11()
[   30.126859] Calling initcall 0x4088fedf: cmd640_init+0x0/0x11()
[   30.132863] initcall 0x4088fedf: cmd640_init+0x0/0x11() returned 0.
[   30.139001] initcall 0x4088fedf ran for 0 msecs: cmd640_init+0x0/0x11()
[   30.145574] Calling initcall 0x4088fef0: cs5530_init+0x0/0x11()
[   30.151590] initcall 0x4088fef0: cs5530_init+0x0/0x11() returned 0.
[   30.157707] initcall 0x4088fef0 ran for 0 msecs: cs5530_init+0x0/0x11()
[   30.164297] Calling initcall 0x4088ff01: cs5535_init+0x0/0x11()
[   30.170298] initcall 0x4088ff01: cs5535_init+0x0/0x11() returned 0.
[   30.176423] initcall 0x4088ff01 ran for 0 msecs: cs5535_init+0x0/0x11()
[   30.183016] Calling initcall 0x4088ff12: cs5536_init+0x0/0x11()
[   30.189030] initcall 0x4088ff12: cs5536_init+0x0/0x11() returned 0.
[   30.195157] initcall 0x4088ff12 ran for 0 msecs: cs5536_init+0x0/0x11()
[   30.201730] Calling initcall 0x4088ff23: hpt3x2n_init+0x0/0x11()
[   30.207828] initcall 0x4088ff23: hpt3x2n_init+0x0/0x11() returned 0.
[   30.214033] initcall 0x4088ff23 ran for 0 msecs: hpt3x2n_init+0x0/0x11()
[   30.220716] Calling initcall 0x4088ff34: it821x_init+0x0/0x11()
[   30.226726] initcall 0x4088ff34: it821x_init+0x0/0x11() returned 0.
[   30.232843] initcall 0x4088ff34 ran for 0 msecs: it821x_init+0x0/0x11()
[   30.239431] Calling initcall 0x4088ff45: jmicron_init+0x0/0x11()
[   30.245524] initcall 0x4088ff45: jmicron_init+0x0/0x11() returned 0.
[   30.251746] initcall 0x4088ff45 ran for 0 msecs: jmicron_init+0x0/0x11()
[   30.258407] Calling initcall 0x4088ff56: opti_init+0x0/0x11()
[   30.264250] initcall 0x4088ff56: opti_init+0x0/0x11() returned 0.
[   30.270190] initcall 0x4088ff56 ran for 0 msecs: opti_init+0x0/0x11()
[   30.276611] Calling initcall 0x4088ff67: mpiix_init+0x0/0x11()
[   30.282528] initcall 0x4088ff67: mpiix_init+0x0/0x11() returned 0.
[   30.288562] initcall 0x4088ff67 ran for 0 msecs: mpiix_init+0x0/0x11()
[   30.295069] Calling initcall 0x4088ff78: oldpiix_init+0x0/0x11()
[   30.301167] initcall 0x4088ff78: oldpiix_init+0x0/0x11() returned 0.
[   30.307383] initcall 0x4088ff78 ran for 0 msecs: oldpiix_init+0x0/0x11()
[   30.314043] Calling initcall 0x4088ff89: radisys_init+0x0/0x11()
[   30.320140] initcall 0x4088ff89: radisys_init+0x0/0x11() returned 0.
[   30.326346] initcall 0x4088ff89 ran for 0 msecs: radisys_init+0x0/0x11()
[   30.333022] Calling initcall 0x4088ff9a: sc1200_init+0x0/0x11()
[   30.339048] initcall 0x4088ff9a: sc1200_init+0x0/0x11() returned 0.
[   30.345164] initcall 0x4088ff9a ran for 0 msecs: sc1200_init+0x0/0x11()
[   30.351754] Calling initcall 0x4088ffab: serverworks_init+0x0/0x11()
[   30.358198] initcall 0x4088ffab: serverworks_init+0x0/0x11() returned 0.
[   30.364749] initcall 0x4088ffab ran for 0 msecs: serverworks_init+0x0/0x11()
[   30.371772] Calling initcall 0x4088ffbc: sil680_init+0x0/0x11()
[   30.377784] initcall 0x4088ffbc: sil680_init+0x0/0x11() returned 0.
[   30.383913] initcall 0x4088ffbc ran for 0 msecs: sil680_init+0x0/0x11()
[   30.390487] Calling initcall 0x4088ffcd: sl82c105_init+0x0/0x11()
[   30.396684] initcall 0x4088ffcd: sl82c105_init+0x0/0x11() returned 0.
[   30.402978] initcall 0x4088ffcd ran for 0 msecs: sl82c105_init+0x0/0x11()
[   30.409726] Calling initcall 0x4088ffde: triflex_init+0x0/0x11()
[   30.415831] initcall 0x4088ffde: triflex_init+0x0/0x11() returned 0.
[   30.422029] initcall 0x4088ffde ran for 0 msecs: triflex_init+0x0/0x11()
[   30.428712] Calling initcall 0x4088ffef: ata_generic_init+0x0/0x11()
[   30.435159] initcall 0x4088ffef: ata_generic_init+0x0/0x11() returned 0.
[   30.441704] initcall 0x4088ffef ran for 0 msecs: ata_generic_init+0x0/0x11()
[   30.448730] Calling initcall 0x4089010b: nonstatic_sysfs_init+0x0/0xa()
[   30.455316] initcall 0x4089010b: nonstatic_sysfs_init+0x0/0xa() returned 0.
[   30.462240] initcall 0x4089010b ran for 0 msecs: nonstatic_sysfs_init+0x0/0xa()
[   30.469528] Calling initcall 0x403ff7cd: pd6729_module_init+0x0/0x11()
[   30.476146] initcall 0x403ff7cd: pd6729_module_init+0x0/0x11() returned 0.
[   30.482880] initcall 0x403ff7cd ran for 0 msecs: pd6729_module_init+0x0/0x11()
[   30.490061] Calling initcall 0x40890339: mon_init+0x0/0xec()
[   30.495974] initcall 0x40890339: mon_init+0x0/0xec() returned 0.
[   30.501829] initcall 0x40890339 ran for 0 msecs: mon_init+0x0/0xec()
[   30.508160] Calling initcall 0x408904f6: ehci_hcd_init+0x0/0x11()
[   30.514395] PCI: No IRQ known for interrupt pin B of device 0000:00:02.1. Probably buggy MP table.
[   30.523253] ehci_hcd 0000:00:02.1: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.1 setup!
[   30.531685] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[   30.537493] initcall 0x408904f6: ehci_hcd_init+0x0/0x11() returned 0.
[   30.543873] initcall 0x408904f6 ran for 9 msecs: ehci_hcd_init+0x0/0x11()
[   30.550628] Calling initcall 0x40890507: ohci_hcd_mod_init+0x0/0x5f()
[   30.557043] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   30.564652] PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Probably buggy MP table.
[   30.573507] ohci_hcd 0000:00:02.0: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.0 setup!
[   30.581929] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[   30.587857] initcall 0x40890507: ohci_hcd_mod_init+0x0/0x5f() returned 0.
[   30.594485] initcall 0x40890507 ran for 17 msecs: ohci_hcd_mod_init+0x0/0x5f()
[   30.601681] Calling initcall 0x40890566: uhci_hcd_init+0x0/0x9c()
[   30.607748] USB Universal Host Controller Interface driver v3.0
[   30.613771] initcall 0x40890566: uhci_hcd_init+0x0/0x9c() returned 0.
[   30.620050] initcall 0x40890566 ran for 1 msecs: uhci_hcd_init+0x0/0x9c()
[   30.626818] Calling initcall 0x40890602: sl811h_init+0x0/0x3e()
[   30.632710] sl811: driver sl811-hcd, 19 May 2005
[   30.637442] initcall 0x40890602: sl811h_init+0x0/0x3e() returned 0.
[   30.643568] initcall 0x40890602 ran for 0 msecs: sl811h_init+0x0/0x3e()
[   30.650141] Calling initcall 0x40890640: acm_init+0x0/0xd9()
[   30.655894] usbcore: registered new interface driver cdc_acm
[   30.661438] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[   30.671671] initcall 0x40890640: acm_init+0x0/0xd9() returned 0.
[   30.677631] initcall 0x40890640 ran for 7 msecs: acm_init+0x0/0xd9()
[   30.683960] Calling initcall 0x40890719: usblp_init+0x0/0x11()
[   30.689875] usbcore: registered new interface driver usblp
[   30.695247] initcall 0x40890719: usblp_init+0x0/0x11() returned 0.
[   30.701384] initcall 0x40890719 ran for 3 msecs: usblp_init+0x0/0x11()
[   30.707888] Calling initcall 0x4089072a: usb_stor_init+0x0/0x38()
[   30.713952] Initializing USB Mass Storage driver...
[   30.718921] usbcore: registered new interface driver usb-storage
[   30.724810] USB Mass Storage support registered.
[   30.729413] initcall 0x4089072a: usb_stor_init+0x0/0x38() returned 0.
[   30.735811] initcall 0x4089072a ran for 9 msecs: usb_stor_init+0x0/0x38()
[   30.742565] Calling initcall 0x40890762: adu_init+0x0/0xa2()
[   30.748306] usbcore: registered new interface driver adutux
[   30.753756] drivers/usb/misc/adutux.c: adutux adutux (see www.ontrak.net) v0.0.13
[   30.761213] drivers/usb/misc/adutux.c: adutux is an experimental driver. Use at your own risk
[   30.769703] initcall 0x40890762: adu_init+0x0/0xa2() returned 0.
[   30.775674] initcall 0x40890762 ran for 9 msecs: adu_init+0x0/0xa2()
[   30.781996] Calling initcall 0x40890804: appledisplay_init+0x0/0x54()
[   30.788567] usbcore: registered new interface driver appledisplay
[   30.794542] initcall 0x40890804: appledisplay_init+0x0/0x54() returned 0.
[   30.801288] initcall 0x40890804 ran for 2 msecs: appledisplay_init+0x0/0x54()
[   30.808397] Calling initcall 0x40890858: auerswald_init+0x0/0x36()
[   30.814647] usbcore: registered new interface driver auerswald
[   30.820368] initcall 0x40890858: auerswald_init+0x0/0x36() returned 0.
[   30.826856] initcall 0x40890858 ran for 4 msecs: auerswald_init+0x0/0x36()
[   30.833698] Calling initcall 0x4089088e: emi62_init+0x0/0x2c()
[   30.839619] usbcore: registered new interface driver emi62 - firmware loader
[   30.846547] initcall 0x4089088e: emi62_init+0x0/0x2c() returned 0.
[   30.852687] initcall 0x4089088e ran for 2 msecs: emi62_init+0x0/0x2c()
[   30.859190] Calling initcall 0x408908ba: ftdi_elan_init+0x0/0x134()
[   30.865427] driver ftdi-elan built at 19:51:07 on Nov 13 2007
[   30.871396] usbcore: registered new interface driver ftdi-elan
[   30.877113] initcall 0x408908ba: ftdi_elan_init+0x0/0x134() returned 0.
[   30.883689] initcall 0x408908ba ran for 5 msecs: ftdi_elan_init+0x0/0x134()
[   30.890618] Calling initcall 0x408909ee: ld_usb_init+0x0/0x3a()
[   30.896614] usbcore: registered new interface driver ldusb
[   30.901984] initcall 0x408909ee: ld_usb_init+0x0/0x3a() returned 0.
[   30.908207] initcall 0x408909ee ran for 1 msecs: ld_usb_init+0x0/0x3a()
[   30.914799] Calling initcall 0x40890a28: lego_usb_tower_init+0x0/0x91()
[   30.921484] usbcore: registered new interface driver legousbtower
[   30.927461] drivers/usb/misc/legousbtower.c: LEGO USB Tower Driver v0.96
[   30.934140] initcall 0x40890a28: lego_usb_tower_init+0x0/0x91() returned 0.
[   30.941055] initcall 0x40890a28 ran for 8 msecs: lego_usb_tower_init+0x0/0x91()
[   30.948338] Calling initcall 0x40890ab9: init_phidget+0x0/0x1f()
[   30.954417] initcall 0x40890ab9: init_phidget+0x0/0x1f() returned 0.
[   30.960637] initcall 0x40890ab9 ran for 0 msecs: init_phidget+0x0/0x1f()
[   30.967318] Calling initcall 0x40890ad8: interfacekit_init+0x0/0x3a()
[   30.973831] usbcore: registered new interface driver phidgetkit
[   30.979633] initcall 0x40890ad8: interfacekit_init+0x0/0x3a() returned 0.
[   30.986375] initcall 0x40890ad8 ran for 4 msecs: interfacekit_init+0x0/0x3a()
[   30.993484] Calling initcall 0x40890b12: motorcontrol_init+0x0/0x3a()
[   31.000001] usbcore: registered new interface driver phidgetmotorcontrol
[   31.006585] initcall 0x40890b12: motorcontrol_init+0x0/0x3a() returned 0.
[   31.013330] initcall 0x40890b12 ran for 2 msecs: motorcontrol_init+0x0/0x3a()
[   31.020440] Calling initcall 0x40890b4c: phidget_servo_init+0x0/0x3a()
[   31.027056] usbcore: registered new interface driver phidgetservo
[   31.033034] initcall 0x40890b4c: phidget_servo_init+0x0/0x3a() returned 0.
[   31.039870] initcall 0x40890b4c ran for 1 msecs: phidget_servo_init+0x0/0x3a()
[   31.047065] Calling initcall 0x40890b86: usb_rio_init+0x0/0x35()
[   31.053150] usbcore: registered new interface driver rio500
[   31.058604] drivers/usb/misc/rio500.c: v1.1:USB Rio 500 driver
[   31.064418] initcall 0x40890b86: usb_rio_init+0x0/0x35() returned 0.
[   31.070723] initcall 0x40890b86 ran for 10 msecs: usb_rio_init+0x0/0x35()
[   31.077485] Calling initcall 0x40890bbb: tv_init+0x0/0x50()
[   31.083147] usbcore: registered new interface driver trancevibrator
[   31.089298] drivers/usb/misc/trancevibrator.c: v1.1:PlayStation 2 Trance Vibrator driver
[   31.097366] initcall 0x40890bbb: tv_init+0x0/0x50() returned 0.
[   31.103244] initcall 0x40890bbb ran for 6 msecs: tv_init+0x0/0x50()
[   31.109480] Calling initcall 0x40890c9c: i8042_init+0x0/0xbc()
[   31.118262] serio: i8042 KBD port at 0x60,0x64 irq 1
[   31.123134] serio: i8042 AUX port at 0x60,0x64 irq 12
[   31.128155] initcall 0x40890c9c: i8042_init+0x0/0xbc() returned 0.
[   31.134280] initcall 0x40890c9c ran for 8 msecs: i8042_init+0x0/0xbc()
[   31.140783] Calling initcall 0x40890d58: serport_init+0x0/0x2a()
[   31.147199] initcall 0x40890d58: serport_init+0x0/0x2a() returned 0.
[   31.153513] initcall 0x40890d58 ran for 0 msecs: serport_init+0x0/0x2a()
[   31.160189] Calling initcall 0x40890d82: ct82c710_init+0x0/0x169()
[   31.166355] initcall 0x40890d82: ct82c710_init+0x0/0x169() returned -19.
[   31.173012] initcall 0x40890d82 ran for 0 msecs: ct82c710_init+0x0/0x169()
[   31.179862] Calling initcall 0x40890eeb: serio_raw_init+0x0/0x11()
[   31.186508] initcall 0x40890eeb: serio_raw_init+0x0/0x11() returned 0.
[   31.192884] initcall 0x40890eeb ran for 0 msecs: serio_raw_init+0x0/0x11()
[   31.199733] Calling initcall 0x40890f8d: emu_init+0x0/0x11()
[   31.205489] initcall 0x40890f8d: emu_init+0x0/0x11() returned 0.
[   31.211370] initcall 0x40890f8d ran for 0 msecs: emu_init+0x0/0x11()
[   31.217668] Calling initcall 0x40890f9e: fm801_gp_init+0x0/0x11()
[   31.223856] initcall 0x40890f9e: fm801_gp_init+0x0/0x11() returned 0.
[   31.230145] initcall 0x40890f9e ran for 0 msecs: fm801_gp_init+0x0/0x11()
[   31.236915] Calling initcall 0x40890faf: ns558_init+0x0/0x27f()
[   31.251566] initcall 0x40890faf: ns558_init+0x0/0x27f() returned -19.
[   31.257853] initcall 0x40890faf ran for 8 msecs: ns558_init+0x0/0x27f()
[   31.264443] Calling initcall 0x40891327: mousedev_init+0x0/0x50()
[   31.283009] mice: PS/2 mouse device common for all mice
[   31.288118] initcall 0x40891327: mousedev_init+0x0/0x50() returned 0.
[   31.294517] initcall 0x40891327 ran for 19 msecs: mousedev_init+0x0/0x50()
[   31.301366] Calling initcall 0x40891377: atkbd_init+0x0/0x11()
[   31.307314] initcall 0x40891377: atkbd_init+0x0/0x11() returned 0.
[   31.313342] initcall 0x40891377 ran for 0 msecs: atkbd_init+0x0/0x11()
[   31.319847] Calling initcall 0x40891388: lkkbd_init+0x0/0x11()
[   31.347946] input: AT Translated Set 2 keyboard as /class/input/input1
[   31.373037] initcall 0x40891388: lkkbd_init+0x0/0x11() returned 0.
[   31.379062] initcall 0x40891388 ran for 45 msecs: lkkbd_init+0x0/0x11()
[   31.385644] Calling initcall 0x40891399: xtkbd_init+0x0/0x11()
[   31.391568] initcall 0x40891399: xtkbd_init+0x0/0x11() returned 0.
[   31.397603] initcall 0x40891399 ran for 0 msecs: xtkbd_init+0x0/0x11()
[   31.404106] Calling initcall 0x408913aa: skbd_init+0x0/0x11()
[   31.409941] initcall 0x408913aa: skbd_init+0x0/0x11() returned 0.
[   31.415902] initcall 0x408913aa ran for 0 msecs: skbd_init+0x0/0x11()
[   31.422301] Calling initcall 0x408913bb: a3d_init+0x0/0xf()
[   31.427869] initcall 0x408913bb: a3d_init+0x0/0xf() returned 0.
[   31.433741] initcall 0x408913bb ran for 0 msecs: a3d_init+0x0/0xf()
[   31.439985] Calling initcall 0x408913ca: cobra_init+0x0/0xf()
[   31.445707] initcall 0x408913ca: cobra_init+0x0/0xf() returned 0.
[   31.451769] initcall 0x408913ca ran for 0 msecs: cobra_init+0x0/0xf()
[   31.458179] Calling initcall 0x408913d9: gf2k_init+0x0/0xf()
[   31.463818] initcall 0x408913d9: gf2k_init+0x0/0xf() returned 0.
[   31.469791] initcall 0x408913d9 ran for 0 msecs: gf2k_init+0x0/0xf()
[   31.476121] Calling initcall 0x408913e8: grip_init+0x0/0xf()
[   31.481757] initcall 0x408913e8: grip_init+0x0/0xf() returned 0.
[   31.487735] initcall 0x408913e8 ran for 0 msecs: grip_init+0x0/0xf()
[   31.494057] Calling initcall 0x408913f7: guillemot_init+0x0/0xf()
[   31.500130] initcall 0x408913f7: guillemot_init+0x0/0xf() returned 0.
[   31.506533] initcall 0x408913f7 ran for 0 msecs: guillemot_init+0x0/0xf()
[   31.513295] Calling initcall 0x40891406: interact_init+0x0/0xf()
[   31.519282] initcall 0x40891406: interact_init+0x0/0xf() returned 0.
[   31.525602] initcall 0x40891406 ran for 0 msecs: interact_init+0x0/0xf()
[   31.532278] Calling initcall 0x40891415: joydump_init+0x0/0xf()
[   31.538173] initcall 0x40891415: joydump_init+0x0/0xf() returned 0.
[   31.544405] initcall 0x40891415 ran for 0 msecs: joydump_init+0x0/0xf()
[   31.550996] Calling initcall 0x40891424: twidjoy_init+0x0/0x11()
[   31.558117] initcall 0x40891424: twidjoy_init+0x0/0x11() returned 0.
[   31.564311] initcall 0x40891424 ran for 1 msecs: twidjoy_init+0x0/0x11()
[   31.570990] Calling initcall 0x40891435: warrior_init+0x0/0x11()
[   31.577088] initcall 0x40891435: warrior_init+0x0/0x11() returned 0.
[   31.583358] initcall 0x40891435 ran for 0 msecs: warrior_init+0x0/0x11()
[   31.589965] Calling initcall 0x40891446: usb_acecad_init+0x0/0x35()
[   31.596307] usbcore: registered new interface driver usb_acecad
[   31.602108] drivers/input/tablet/acecad.c: v3.2:USB Acecad Flair tablet driver
[   31.609311] initcall 0x40891446: usb_acecad_init+0x0/0x35() returned 0.
[   31.615880] initcall 0x40891446 ran for 4 msecs: usb_acecad_init+0x0/0x35()
[   31.622815] Calling initcall 0x4089147b: gtco_init+0x0/0x50()
[   31.628634] usbcore: registered new interface driver gtco
[   31.633913] GTCO usb driver version: 2.00.0006initcall 0x4089147b: gtco_init+0x0/0x50() returned 0.
[   31.642918] initcall 0x4089147b ran for 5 msecs: gtco_init+0x0/0x50()
[   31.649327] Calling initcall 0x408914cb: elo_init+0x0/0x11()
[   31.655066] initcall 0x408914cb: elo_init+0x0/0x11() returned 0.
[   31.660941] initcall 0x408914cb ran for 0 msecs: elo_init+0x0/0x11()
[   31.667271] Calling initcall 0x408914dc: fujitsu_init+0x0/0x11()
[   31.673368] initcall 0x408914dc: fujitsu_init+0x0/0x11() returned 0.
[   31.679584] initcall 0x408914dc ran for 0 msecs: fujitsu_init+0x0/0x11()
[   31.686245] Calling initcall 0x408914ed: mk712_init+0x0/0x1b8()
[   31.692142] mk712: device not present
[   31.695791] initcall 0x408914ed: mk712_init+0x0/0x1b8() returned -19.
[   31.702189] initcall 0x408914ed ran for 3 msecs: mk712_init+0x0/0x1b8()
[   31.708785] Calling initcall 0x408916a5: usbtouch_init+0x0/0x11()
[   31.714952] usbcore: registered new interface driver usbtouchscreen
[   31.721107] initcall 0x408916a5: usbtouch_init+0x0/0x11() returned 0.
[   31.727510] initcall 0x408916a5 ran for 2 msecs: usbtouch_init+0x0/0x11()
[   31.734265] Calling initcall 0x408916b6: pm_init+0x0/0x11()
[   31.739927] initcall 0x408916b6: pm_init+0x0/0x11() returned 0.
[   31.745703] initcall 0x408916b6 ran for 0 msecs: pm_init+0x0/0x11()
[   31.751947] Calling initcall 0x408916c7: tr_init+0x0/0x11()
[   31.757602] initcall 0x408916c7: tr_init+0x0/0x11() returned 0.
[   31.763395] initcall 0x408916c7 ran for 0 msecs: tr_init+0x0/0x11()
[   31.769622] Calling initcall 0x408916d8: pcspkr_init+0x0/0xa()
[   31.775720] input: PC Speaker as /class/input/input2
[   31.790807] initcall 0x408916d8: pcspkr_init+0x0/0xa() returned 0.
[   31.796833] initcall 0x408916d8 ran for 14 msecs: pcspkr_init+0x0/0xa()
[   31.803424] Calling initcall 0x40891738: wb_module_init+0x0/0x272()
[   31.809670] wistron_btns: System unknown
[   31.813570] initcall 0x40891738: wb_module_init+0x0/0x272() returned -19.
[   31.820316] initcall 0x40891738 ran for 2 msecs: wb_module_init+0x0/0x272()
[   31.827256] Calling initcall 0x408919aa: usb_keyspan_init+0x0/0x3a()
[   31.833682] usbcore: registered new interface driver keyspan_remote
[   31.839832] initcall 0x408919aa: usb_keyspan_init+0x0/0x3a() returned 0.
[   31.846488] initcall 0x408919aa ran for 4 msecs: usb_keyspan_init+0x0/0x3a()
[   31.853510] Calling initcall 0x408919e4: powermate_init+0x0/0x11()
[   31.859767] usbcore: registered new interface driver powermate
[   31.865484] initcall 0x408919e4: powermate_init+0x0/0x11() returned 0.
[   31.871974] initcall 0x408919e4 ran for 1 msecs: powermate_init+0x0/0x11()
[   31.878822] Calling initcall 0x408919f5: yealink_dev_init+0x0/0x35()
[   31.885247] usbcore: registered new interface driver yealink
[   31.890785] drivers/input/misc/yealink.c: Yealink phone driver:yld-20051230
[   31.897727] initcall 0x408919f5: yealink_dev_init+0x0/0x35() returned 0.
[   31.904377] initcall 0x408919f5 ran for 8 msecs: yealink_dev_init+0x0/0x35()
[   31.911404] Calling initcall 0x40891a2a: uinput_init+0x0/0xa()
[   31.917330] initcall 0x40891a2a: uinput_init+0x0/0xa() returned 0.
[   31.923371] initcall 0x40891a2a ran for 0 msecs: uinput_init+0x0/0xa()
[   31.929859] Calling initcall 0x40891ad8: i2c_savage4_init+0x0/0x11()
[   31.936316] initcall 0x40891ad8: i2c_savage4_init+0x0/0x11() returned 0.
[   31.942870] initcall 0x40891ad8 ran for 0 msecs: i2c_savage4_init+0x0/0x11()
[   31.949877] Calling initcall 0x40891ae9: i2c_sis5595_init+0x0/0x11()
[   31.956328] initcall 0x40891ae9: i2c_sis5595_init+0x0/0x11() returned 0.
[   31.962888] initcall 0x40891ae9 ran for 0 msecs: i2c_sis5595_init+0x0/0x11()
[   31.969896] Calling initcall 0x40891afa: ds1337_init+0x0/0xc()
[   31.975830] initcall 0x40891afa: ds1337_init+0x0/0xc() returned 0.
[   31.981855] initcall 0x40891afa ran for 0 msecs: ds1337_init+0x0/0xc()
[   31.988358] Calling initcall 0x40891b06: ds1374_init+0x0/0xc()
[   31.994272] initcall 0x40891b06: ds1374_init+0x0/0xc() returned 0.
[   32.000311] initcall 0x40891b06 ran for 0 msecs: ds1374_init+0x0/0xc()
[   32.006818] Calling initcall 0x40891b12: ds1682_init+0x0/0xc()
[   32.012734] initcall 0x40891b12: ds1682_init+0x0/0xc() returned 0.
[   32.018786] initcall 0x40891b12 ran for 0 msecs: ds1682_init+0x0/0xc()
[   32.025272] Calling initcall 0x40891b1e: eeprom_init+0x0/0xc()
[   32.031187] initcall 0x40891b1e: eeprom_init+0x0/0xc() returned 0.
[   32.037232] initcall 0x40891b1e ran for 0 msecs: eeprom_init+0x0/0xc()
[   32.043735] Calling initcall 0x40891b2a: pca9539_init+0x0/0xc()
[   32.049735] initcall 0x40891b2a: pca9539_init+0x0/0xc() returned 0.
[   32.055877] initcall 0x40891b2a ran for 0 msecs: pca9539_init+0x0/0xc()
[   32.062451] Calling initcall 0x40891b36: tsl2550_init+0x0/0xc()
[   32.068453] initcall 0x40891b36: tsl2550_init+0x0/0xc() returned 0.
[   32.074580] initcall 0x40891b36 ran for 0 msecs: tsl2550_init+0x0/0xc()
[   32.081170] Calling initcall 0x4044b805: w1_init+0x0/0xfa()
[   32.086716] Driver for 1-wire Dallas network protocol.
[   32.092224] initcall 0x4044b805: w1_init+0x0/0xfa() returned 0.
[   32.097988] initcall 0x4044b805 ran for 5 msecs: w1_init+0x0/0xfa()
[   32.104233] Calling initcall 0x4044cbf0: ds_init+0x0/0x31()
[   32.109895] usbcore: registered new interface driver DS9490R
[   32.115441] initcall 0x4044cbf0: ds_init+0x0/0x31() returned 0.
[   32.121320] initcall 0x4044cbf0 ran for 3 msecs: ds_init+0x0/0x31()
[   32.127563] Calling initcall 0x40891b42: sensors_ds2482_init+0x0/0xc()
[   32.134170] initcall 0x40891b42: sensors_ds2482_init+0x0/0xc() returned 0.
[   32.140905] initcall 0x40891b42 ran for 0 msecs: sensors_ds2482_init+0x0/0xc()
[   32.148101] Calling initcall 0x40891b4e: w1_ds2760_init+0x0/0x24()
[   32.154252] 1-Wire driver for the DS2760 battery monitor  chip  - (c) 2004-2005, Szabolcs Gyurko
[   32.163041] initcall 0x40891b4e: w1_ds2760_init+0x0/0x24() returned 0.
[   32.169503] initcall 0x40891b4e ran for 3 msecs: w1_ds2760_init+0x0/0x24()
[   32.176353] Calling initcall 0x40891bca: asb100_init+0x0/0xc()
[   32.182272] initcall 0x40891bca: asb100_init+0x0/0xc() returned 0.
[   32.188305] initcall 0x40891bca ran for 0 msecs: asb100_init+0x0/0xc()
[   32.194811] Calling initcall 0x40891d56: sensors_w83627hf_init+0x0/0x12b()
[   32.201676] initcall 0x40891d56: sensors_w83627hf_init+0x0/0x12b() returned -19.
[   32.209021] initcall 0x40891d56 ran for 0 msecs: sensors_w83627hf_init+0x0/0x12b()
[   32.216563] Calling initcall 0x40891e81: sensors_w83792d_init+0x0/0xc()
[   32.223256] initcall 0x40891e81: sensors_w83792d_init+0x0/0xc() returned 0.
[   32.230077] initcall 0x40891e81 ran for 0 msecs: sensors_w83792d_init+0x0/0xc()
[   32.237365] Calling initcall 0x40891e8d: sensors_w83781d_init+0x0/0x34c()
[   32.244317] initcall 0x40891e8d: sensors_w83781d_init+0x0/0x34c() returned 0.
[   32.251306] initcall 0x40891e8d ran for 0 msecs: sensors_w83781d_init+0x0/0x34c()
[   32.258747] Calling initcall 0x408921d9: sensors_w83791d_init+0x0/0xc()
[   32.265444] initcall 0x408921d9: sensors_w83791d_init+0x0/0xc() returned 0.
[   32.272262] initcall 0x408921d9 ran for 0 msecs: sensors_w83791d_init+0x0/0xc()
[   32.279550] Calling initcall 0x408921e5: sensors_adm1025_init+0x0/0xc()
[   32.286250] initcall 0x408921e5: sensors_adm1025_init+0x0/0xc() returned 0.
[   32.293064] initcall 0x408921e5 ran for 0 msecs: sensors_adm1025_init+0x0/0xc()
[   32.300820] Calling initcall 0x408921f1: sensors_adm1029_init+0x0/0xc()
[   32.307507] initcall 0x408921f1: sensors_adm1029_init+0x0/0xc() returned 0.
[   32.314328] initcall 0x408921f1 ran for 0 msecs: sensors_adm1029_init+0x0/0xc()
[   32.321610] Calling initcall 0x408921fd: sensors_adm9240_init+0x0/0xc()
[   32.328368] initcall 0x408921fd: sensors_adm9240_init+0x0/0xc() returned 0.
[   32.335185] initcall 0x408921fd ran for 0 msecs: sensors_adm9240_init+0x0/0xc()
[   32.342452] Calling initcall 0x40892209: adt7470_init+0x0/0xc()
[   32.348456] initcall 0x40892209: adt7470_init+0x0/0xc() returned 0.
[   32.354583] initcall 0x40892209 ran for 0 msecs: adt7470_init+0x0/0xc()
[   32.361172] Calling initcall 0x40892215: coretemp_init+0x0/0x1a1()
[   32.367329] initcall 0x40892215: coretemp_init+0x0/0x1a1() returned -19.
[   32.373997] initcall 0x40892215 ran for 0 msecs: coretemp_init+0x0/0x1a1()
[   32.380850] Calling initcall 0x40892433: dme1737_init+0x0/0x11a()
[   32.387047] initcall 0x40892433: dme1737_init+0x0/0x11a() returned 0.
[   32.393332] initcall 0x40892433 ran for 0 msecs: dme1737_init+0x0/0x11a()
[   32.400094] Calling initcall 0x4089254d: ds1621_init+0x0/0xc()
[   32.406007] initcall 0x4089254d: ds1621_init+0x0/0xc() returned 0.
[   32.412048] initcall 0x4089254d ran for 0 msecs: ds1621_init+0x0/0xc()
[   32.418550] Calling initcall 0x40892657: f71805f_init+0x0/0x12a()
[   32.424646] initcall 0x40892657: f71805f_init+0x0/0x12a() returned -19.
[   32.431207] initcall 0x40892657 ran for 0 msecs: f71805f_init+0x0/0x12a()
[   32.437962] Calling initcall 0x40892891: f71882fg_init+0x0/0xe5()
[   32.444039] f71882fg: Not a Fintek device
[   32.448034] f71882fg: Not a Fintek device
[   32.452014] initcall 0x40892891: f71882fg_init+0x0/0xe5() returned -19.
[   32.458584] initcall 0x40892891 ran for 7 msecs: f71882fg_init+0x0/0xe5()
[   32.465347] Calling initcall 0x40892976: fschmd_init+0x0/0xc()
[   32.471325] initcall 0x40892976: fschmd_init+0x0/0xc() returned 0.
[   32.477349] initcall 0x40892976 ran for 0 msecs: fschmd_init+0x0/0xc()
[   32.483853] Calling initcall 0x40892982: sensors_gl518sm_init+0x0/0xc()
[   32.490546] initcall 0x40892982: sensors_gl518sm_init+0x0/0xc() returned 0.
[   32.497368] initcall 0x40892982 ran for 0 msecs: sensors_gl518sm_init+0x0/0xc()
[   32.504652] Calling initcall 0x408929ce: hdaps_init+0x0/0x1c2()
[   32.510546] hdaps: supported laptop not found!
[   32.514968] hdaps: driver init failed (ret=-19)!
[   32.519564] initcall 0x408929ce: hdaps_init+0x0/0x1c2() returned -19.
[   32.525967] initcall 0x408929ce ran for 6 msecs: hdaps_init+0x0/0x1c2()
[   32.532557] Calling initcall 0x40892b90: sm_it87_init+0x0/0x228()
[   32.538650] it87: Found IT8712F chip at 0x290, revision 7
[   32.544004] it87: in3 is VCC (+5V)
[   32.547380] it87: in7 is VCCH (+5V Stand-By)
[   32.551920] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
[   32.559716] initcall 0x40892b90: sm_it87_init+0x0/0x228() returned 0.
[   32.566001] initcall 0x40892b90 ran for 14 msecs: sm_it87_init+0x0/0x228()
[   32.572857] Calling initcall 0x40892db8: k8temp_init+0x0/0x11()
[   32.579135] initcall 0x40892db8: k8temp_init+0x0/0x11() returned 0.
[   32.585242] initcall 0x40892db8 ran for 0 msecs: k8temp_init+0x0/0x11()
[   32.591833] Calling initcall 0x40892dc9: sensors_lm75_init+0x0/0xc()
[   32.598253] initcall 0x40892dc9: sensors_lm75_init+0x0/0xc() returned 0.
[   32.604828] initcall 0x40892dc9 ran for 0 msecs: sensors_lm75_init+0x0/0xc()
[   32.611851] Calling initcall 0x40892dd5: lm93_init+0x0/0xc()
[   32.617581] initcall 0x40892dd5: lm93_init+0x0/0xc() returned 0.
[   32.623473] initcall 0x40892dd5 ran for 0 msecs: lm93_init+0x0/0xc()
[   32.629787] Calling initcall 0x40892de1: sensors_max1619_init+0x0/0xc()
[   32.636500] initcall 0x40892de1: sensors_max1619_init+0x0/0xc() returned 0.
[   32.643319] initcall 0x40892de1 ran for 0 msecs: sensors_max1619_init+0x0/0xc()
[   32.650585] Calling initcall 0x40892ded: sm_smsc47m1_init+0x0/0x1af()
[   32.657010] initcall 0x40892ded: sm_smsc47m1_init+0x0/0x1af() returned -19.
[   32.663935] initcall 0x40892ded ran for 0 msecs: sm_smsc47m1_init+0x0/0x1af()
[   32.671043] Calling initcall 0x40893044: vt1211_init+0x0/0x146()
[   32.677039] initcall 0x40893044: vt1211_init+0x0/0x146() returned -19.
[   32.683521] initcall 0x40893044 ran for 0 msecs: vt1211_init+0x0/0x146()
[   32.690189] Calling initcall 0x4089318a: sm_vt8231_init+0x0/0x11()
[   32.696458] initcall 0x4089318a: sm_vt8231_init+0x0/0x11() returned 0.
[   32.702856] initcall 0x4089318a ran for 0 msecs: sm_vt8231_init+0x0/0x11()
[   32.709688] Calling initcall 0x4089319b: sensors_w83l785ts_init+0x0/0xc()
[   32.716575] initcall 0x4089319b: sensors_w83l785ts_init+0x0/0xc() returned 0.
[   32.723567] initcall 0x4089319b ran for 0 msecs: sensors_w83l785ts_init+0x0/0xc()
[   32.731013] Calling initcall 0x408931a7: vhci_init+0x0/0x59()
[   32.736731] Bluetooth: Virtual HCI driver ver 1.2
[   32.741525] initcall 0x408931a7: vhci_init+0x0/0x59() returned 0.
[   32.747485] initcall 0x408931a7 ran for 0 msecs: vhci_init+0x0/0x59()
[   32.753885] Calling initcall 0x40893200: bpa10x_init+0x0/0x2b()
[   32.759780] Bluetooth: Digianswer Bluetooth USB driver ver 0.9
[   32.765717] usbcore: registered new interface driver bpa10x
[   32.771172] initcall 0x40893200: bpa10x_init+0x0/0x2b() returned 0.
[   32.777397] initcall 0x40893200 ran for 7 msecs: bpa10x_init+0x0/0x2b()
[   32.783987] Calling initcall 0x4089322b: init_bluecard_cs+0x0/0xa()
[   32.790327] initcall 0x4089322b: init_bluecard_cs+0x0/0xa() returned 0.
[   32.796808] initcall 0x4089322b ran for 0 msecs: init_bluecard_cs+0x0/0xa()
[   32.803745] Calling initcall 0x40893235: btusb_init+0x0/0x2b()
[   32.809549] Bluetooth: Generic Bluetooth USB driver ver 0.1
[   32.815224] usbcore: registered new interface driver btusb
[   32.820595] initcall 0x40893235: btusb_init+0x0/0x2b() returned 0.
[   32.826729] initcall 0x40893235 ran for 8 msecs: btusb_init+0x0/0x2b()
[   32.833232] Calling initcall 0x40893260: isdn_init+0x0/0x27e()
[   32.839505] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/1.1.2.2/1.1.2.2
[   32.846399] initcall 0x40893260: isdn_init+0x0/0x27e() returned 0.
[   32.852546] initcall 0x40893260 ran for 3 msecs: isdn_init+0x0/0x27e()
[   32.859053] Calling initcall 0x408934de: divert_init+0x0/0x59()
[   32.864950] dss1_divert module successfully installed
[   32.869978] initcall 0x408934de: divert_init+0x0/0x59() returned 0.
[   32.876205] initcall 0x408934de ran for 4 msecs: divert_init+0x0/0x59()
[   32.882798] Calling initcall 0x40893537: gigaset_init_module+0x0/0x37()
[   32.889381] gigaset: Hansjoerg Lipp <hjlipp@web.de>, Tilman Schmidt <tilman@imap.cc>, Stefan Eilers
[   32.898400] gigaset: Driver for Gigaset 307x
[   32.902651] initcall 0x40893537: gigaset_init_module+0x0/0x37() returned 0.
[   32.909572] initcall 0x40893537 ran for 8 msecs: gigaset_init_module+0x0/0x37()
[   32.916858] Calling initcall 0x4089356e: ser_gigaset_init+0x0/0xc3()
[   32.923316] initcall 0x4089356e: ser_gigaset_init+0x0/0xc3() returned 0.
[   32.929856] initcall 0x4089356e ran for 0 msecs: ser_gigaset_init+0x0/0xc3()
[   32.936886] Calling initcall 0x4089372d: cpufreq_gov_dbs_init+0x0/0x3f()
[   32.943603] initcall 0x4089372d: cpufreq_gov_dbs_init+0x0/0x3f() returned 0.
[   32.950569] initcall 0x4089372d ran for 0 msecs: cpufreq_gov_dbs_init+0x0/0x3f()
[   32.957938] Calling initcall 0x4089376c: cpufreq_gov_dbs_init+0x0/0xa()
[   32.964530] initcall 0x4089376c: cpufreq_gov_dbs_init+0x0/0xa() returned 0.
[   32.971462] initcall 0x4089376c ran for 0 msecs: cpufreq_gov_dbs_init+0x0/0xa()
[   32.978743] Calling initcall 0x4089379a: init_ladder+0x0/0xa()
[   32.984560] cpuidle: using governor ladder
[   32.988628] initcall 0x4089379a: init_ladder+0x0/0xa() returned 0.
[   32.994773] initcall 0x4089379a ran for 3 msecs: init_ladder+0x0/0xa()
[   33.001268] Calling initcall 0x408937a4: init_menu+0x0/0xa()
[   33.006910] cpuidle: using governor menu
[   33.010813] initcall 0x408937a4: init_menu+0x0/0xa() returned 0.
[   33.016781] initcall 0x408937a4 ran for 3 msecs: init_menu+0x0/0xa()
[   33.023111] Calling initcall 0x408937cd: ib_core_init+0x0/0x3a()
[   33.029216] initcall 0x408937cd: ib_core_init+0x0/0x3a() returned 0.
[   33.035417] initcall 0x408937cd ran for 0 msecs: ib_core_init+0x0/0x3a()
[   33.042085] Calling initcall 0x40893811: ib_mad_init_module+0x0/0x97()
[   33.048592] initcall 0x40893811: ib_mad_init_module+0x0/0x97() returned 0.
[   33.055436] initcall 0x40893811 ran for 0 msecs: ib_mad_init_module+0x0/0x97()
[   33.062624] Calling initcall 0x408938a8: ib_sa_init+0x0/0x7f()
[   33.068488] initcall 0x408938a8: ib_sa_init+0x0/0x7f() returned 0.
[   33.074581] initcall 0x408938a8 ran for 0 msecs: ib_sa_init+0x0/0x7f()
[   33.081084] Calling initcall 0x40893927: ib_cm_init+0x0/0x108()
[   33.087082] initcall 0x40893927: ib_cm_init+0x0/0x108() returned 0.
[   33.093216] initcall 0x40893927 ran for 0 msecs: ib_cm_init+0x0/0x108()
[   33.099806] Calling initcall 0x40893a2f: iw_cm_init+0x0/0x2a()
[   33.105651] initcall 0x40893a2f: iw_cm_init+0x0/0x2a() returned 0.
[   33.111766] initcall 0x40893a2f ran for 0 msecs: iw_cm_init+0x0/0x2a()
[   33.118260] Calling initcall 0x404932fc: addr_init+0x0/0x39()
[   33.124035] initcall 0x404932fc: addr_init+0x0/0x39() returned 0.
[   33.130044] initcall 0x404932fc ran for 0 msecs: addr_init+0x0/0x39()
[   33.136464] Calling initcall 0x40493b21: cma_init+0x0/0xad()
[   33.142181] initcall 0x40493b21: cma_init+0x0/0xad() returned 0.
[   33.148069] initcall 0x40493b21 ran for 0 msecs: cma_init+0x0/0xad()
[   33.154398] Calling initcall 0x40893a59: ib_umad_init+0x0/0xa7()
[   33.160495] initcall 0x40893a59: ib_umad_init+0x0/0xa7() returned 0.
[   33.166701] initcall 0x40893a59 ran for 0 msecs: ib_umad_init+0x0/0xa7()
[   33.173377] Calling initcall 0x40893b00: ib_uverbs_init+0x0/0x126()
[   33.179822] initcall 0x40893b00: ib_uverbs_init+0x0/0x126() returned 0.
[   33.186279] initcall 0x40893b00 ran for 0 msecs: ib_uverbs_init+0x0/0x126()
[   33.193214] Calling initcall 0x40893c26: ib_ucm_init+0x0/0xa2()
[   33.199222] initcall 0x40893c26: ib_ucm_init+0x0/0xa2() returned 0.
[   33.205347] initcall 0x40893c26 ran for 0 msecs: ib_ucm_init+0x0/0xa2()
[   33.211938] Calling initcall 0x40893cc8: ucma_init+0x0/0x44()
[   33.217809] initcall 0x40893cc8: ucma_init+0x0/0x44() returned 0.
[   33.223758] initcall 0x40893cc8 ran for 0 msecs: ucma_init+0x0/0x44()
[   33.230158] Calling initcall 0x40893d0c: mlx4_ib_init+0x0/0xa()
[   33.236072] initcall 0x40893d0c: mlx4_ib_init+0x0/0xa() returned 0.
[   33.242288] initcall 0x40893d0c ran for 0 msecs: mlx4_ib_init+0x0/0xa()
[   33.248876] Calling initcall 0x40893d16: srp_init_module+0x0/0xa7()
[   33.255229] initcall 0x40893d16: srp_init_module+0x0/0xa7() returned 0.
[   33.261702] initcall 0x40893d16 ran for 0 msecs: srp_init_module+0x0/0xa7()
[   33.268641] Calling initcall 0x40893dbd: iser_init+0x0/0x111()
[   33.274687] iscsi: registered transport (iser)
[   33.279014] initcall 0x40893dbd: iser_init+0x0/0x111() returned 0.
[   33.285153] initcall 0x40893dbd ran for 2 msecs: iser_init+0x0/0x111()
[   33.291658] Calling initcall 0x4089450c: dcdrbu_init+0x0/0x122()
[   33.297780] initcall 0x4089450c: dcdrbu_init+0x0/0x122() returned 0.
[   33.303973] initcall 0x4089450c ran for 0 msecs: dcdrbu_init+0x0/0x122()
[   33.310649] Calling initcall 0x4089462e: dcdbas_init+0x0/0x4f()
[   33.316859] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   33.324339] initcall 0x4089462e: dcdbas_init+0x0/0x4f() returned 0.
[   33.330561] initcall 0x4089462e ran for 3 msecs: dcdbas_init+0x0/0x4f()
[   33.337150] Calling initcall 0x40894abe: init_soundcore+0x0/0x51()
[   33.343418] initcall 0x40894abe: init_soundcore+0x0/0x51() returned 0.
[   33.350236] initcall 0x40894abe ran for 0 msecs: init_soundcore+0x0/0x51()
[   33.357082] Calling initcall 0x40894b0f: alsa_sound_init+0x0/0x7d()
[   33.363390] Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 23 06:09:18 2007 UTC).
[   33.372345] initcall 0x40894b0f: alsa_sound_init+0x0/0x7d() returned 0.
[   33.378925] initcall 0x40894b0f ran for 4 msecs: alsa_sound_init+0x0/0x7d()
[   33.385854] Calling initcall 0x40894d12: alsa_hwdep_init+0x0/0x42()
[   33.392115] initcall 0x40894d12: alsa_hwdep_init+0x0/0x42() returned 0.
[   33.398676] initcall 0x40894d12 ran for 0 msecs: alsa_hwdep_init+0x0/0x42()
[   33.405612] Calling initcall 0x40894d54: alsa_timer_init+0x0/0x144()
[   33.412226] initcall 0x40894d54: alsa_timer_init+0x0/0x144() returned 0.
[   33.418781] initcall 0x40894d54 ran for 0 msecs: alsa_timer_init+0x0/0x144()
[   33.425786] Calling initcall 0x40894e98: alsa_pcm_init+0x0/0x49()
[   33.431863] initcall 0x40894e98: alsa_pcm_init+0x0/0x49() returned 0.
[   33.438263] initcall 0x40894e98 ran for 0 msecs: alsa_pcm_init+0x0/0x49()
[   33.445025] Calling initcall 0x40894ee1: snd_mem_init+0x0/0x24()
[   33.451014] initcall 0x40894ee1: snd_mem_init+0x0/0x24() returned 0.
[   33.457331] initcall 0x40894ee1 ran for 0 msecs: snd_mem_init+0x0/0x24()
[   33.464009] Calling initcall 0x40894f05: alsa_rawmidi_init+0x0/0x73()
[   33.470423] initcall 0x40894f05: alsa_rawmidi_init+0x0/0x73() returned 0.
[   33.477177] initcall 0x40894f05 ran for 0 msecs: alsa_rawmidi_init+0x0/0x73()
[   33.484287] Calling initcall 0x40894f78: alsa_mixer_oss_init+0x0/0x29()
[   33.490882] initcall 0x40894f78: alsa_mixer_oss_init+0x0/0x29() returned 0.
[   33.497802] initcall 0x40894f78 ran for 0 msecs: alsa_mixer_oss_init+0x0/0x29()
[   33.505089] Calling initcall 0x40894fa1: alsa_pcm_oss_init+0x0/0x7c()
[   33.511515] initcall 0x40894fa1: alsa_pcm_oss_init+0x0/0x7c() returned 0.
[   33.518251] initcall 0x40894fa1 ran for 0 msecs: alsa_pcm_oss_init+0x0/0x7c()
[   33.525361] Calling initcall 0x4089501d: alsa_ainstr_fm_init+0x0/0x3()
[   33.531865] initcall 0x4089501d: alsa_ainstr_fm_init+0x0/0x3() returned 0.
[   33.538704] initcall 0x4089501d ran for 0 msecs: alsa_ainstr_fm_init+0x0/0x3()
[   33.545899] Calling initcall 0x40895020: alsa_ainstr_simple_init+0x0/0x3()
[   33.552754] initcall 0x40895020: alsa_ainstr_simple_init+0x0/0x3() returned 0.
[   33.559935] initcall 0x40895020 ran for 0 msecs: alsa_ainstr_simple_init+0x0/0x3()
[   33.567485] Calling initcall 0x40895023: alsa_seq_oss_init+0x0/0x150()
[   33.574588] initcall 0x40895023: alsa_seq_oss_init+0x0/0x150() returned 0.
[   33.581310] initcall 0x40895023 ran for 0 msecs: alsa_seq_oss_init+0x0/0x150()
[   33.588506] Calling initcall 0x40895345: alsa_seq_init+0x0/0x33()
[   33.594785] initcall 0x40895345: alsa_seq_init+0x0/0x33() returned 0.
[   33.601068] initcall 0x40895345 ran for 2 msecs: alsa_seq_init+0x0/0x33()
[   33.607831] Calling initcall 0x4089557a: alsa_seq_device_init+0x0/0x4a()
[   33.614509] initcall 0x4089557a: alsa_seq_device_init+0x0/0x4a() returned 0.
[   33.621520] initcall 0x4089557a ran for 0 msecs: alsa_seq_device_init+0x0/0x4a()
[   33.628892] Calling initcall 0x408955c4: alsa_seq_midi_event_init+0x0/0x3()
[   33.635824] initcall 0x408955c4: alsa_seq_midi_event_init+0x0/0x3() returned 0.
[   33.643103] initcall 0x408955c4 ran for 0 msecs: alsa_seq_midi_event_init+0x0/0x3()
[   33.650731] Calling initcall 0x408955c7: alsa_seq_midi_init+0x0/0x24()
[   33.657247] initcall 0x408955c7: alsa_seq_midi_init+0x0/0x24() returned 0.
[   33.664068] initcall 0x408955c7 ran for 0 msecs: alsa_seq_midi_init+0x0/0x24()
[   33.671270] Calling initcall 0x408955eb: alsa_seq_midi_emul_init+0x0/0x3()
[   33.678115] initcall 0x408955eb: alsa_seq_midi_emul_init+0x0/0x3() returned 0.
[   33.685303] initcall 0x408955eb ran for 0 msecs: alsa_seq_midi_emul_init+0x0/0x3()
[   33.692849] Calling initcall 0x408955ee: alsa_seq_instr_init+0x0/0x3()
[   33.699347] initcall 0x408955ee: alsa_seq_instr_init+0x0/0x3() returned 0.
[   33.706185] initcall 0x408955ee ran for 0 msecs: alsa_seq_instr_init+0x0/0x3()
[   33.713387] Calling initcall 0x408955f1: alsa_akm4xxx_module_init+0x0/0x3()
[   33.720318] initcall 0x408955f1: alsa_akm4xxx_module_init+0x0/0x3() returned 0.
[   33.727597] initcall 0x408955f1 ran for 0 msecs: alsa_akm4xxx_module_init+0x0/0x3()
[   33.735226] Calling initcall 0x408955f4: alsa_cs8427_module_init+0x0/0x3()
[   33.742071] initcall 0x408955f4: alsa_cs8427_module_init+0x0/0x3() returned 0.
[   33.749258] initcall 0x408955f4 ran for 0 msecs: alsa_cs8427_module_init+0x0/0x3()
[   33.756805] Calling initcall 0x408955f7: alsa_i2c_init+0x0/0x3()
[   33.762789] initcall 0x408955f7: alsa_i2c_init+0x0/0x3() returned 0.
[   33.769104] initcall 0x408955f7 ran for 0 msecs: alsa_i2c_init+0x0/0x3()
[   33.775781] Calling initcall 0x408955fa: alsa_card_dummy_init+0x0/0x6f()
[   33.784990] initcall 0x408955fa: alsa_card_dummy_init+0x0/0x6f() returned 0.
[   33.791891] initcall 0x408955fa ran for 4 msecs: alsa_card_dummy_init+0x0/0x6f()
[   33.799261] Calling initcall 0x40895669: alsa_card_serial_init+0x0/0x6f()
[   33.806387] no UART detected at 0x1
[   33.810075] initcall 0x40895669: alsa_card_serial_init+0x0/0x6f() returned -19.
[   33.817227] initcall 0x40895669 ran for 3 msecs: alsa_card_serial_init+0x0/0x6f()
[   33.824688] Calling initcall 0x408956d8: alsa_opl3_init+0x0/0x3()
[   33.830757] initcall 0x408956d8: alsa_opl3_init+0x0/0x3() returned 0.
[   33.837159] initcall 0x408956d8 ran for 0 msecs: alsa_opl3_init+0x0/0x3()
[   33.843922] Calling initcall 0x408956db: alsa_opl3_seq_init+0x0/0x14()
[   33.850442] initcall 0x408956db: alsa_opl3_seq_init+0x0/0x14() returned 0.
[   33.857264] initcall 0x408956db ran for 0 msecs: alsa_opl3_seq_init+0x0/0x14()
[   33.864461] Calling initcall 0x408956ef: alsa_mpu401_uart_init+0x0/0x3()
[   33.871135] initcall 0x408956ef: alsa_mpu401_uart_init+0x0/0x3() returned 0.
[   33.878147] initcall 0x408956ef ran for 0 msecs: alsa_mpu401_uart_init+0x0/0x3()
[   33.885522] Calling initcall 0x408956f2: alsa_sb_common_init+0x0/0x3()
[   33.892020] initcall 0x408956f2: alsa_sb_common_init+0x0/0x3() returned 0.
[   33.898866] initcall 0x408956f2 ran for 0 msecs: alsa_sb_common_init+0x0/0x3()
[   33.906055] Calling initcall 0x408956f5: alsa_ad1889_init+0x0/0x11()
[   33.912519] initcall 0x408956f5: alsa_ad1889_init+0x0/0x11() returned 0.
[   33.919098] initcall 0x408956f5 ran for 0 msecs: alsa_ad1889_init+0x0/0x11()
[   33.926082] Calling initcall 0x40895706: alsa_card_als4000_init+0x0/0x11()
[   33.933048] initcall 0x40895706: alsa_card_als4000_init+0x0/0x11() returned 0.
[   33.940118] initcall 0x40895706 ran for 0 msecs: alsa_card_als4000_init+0x0/0x11()
[   33.947667] Calling initcall 0x40895717: alsa_card_atiixp_init+0x0/0x11()
[   33.954546] initcall 0x40895717: alsa_card_atiixp_init+0x0/0x11() returned 0.
[   33.961526] initcall 0x40895717 ran for 0 msecs: alsa_card_atiixp_init+0x0/0x11()
[   33.968986] Calling initcall 0x40895728: alsa_card_bt87x_init+0x0/0x29()
[   33.975780] initcall 0x40895728: alsa_card_bt87x_init+0x0/0x29() returned 0.
[   33.982669] initcall 0x40895728 ran for 0 msecs: alsa_card_bt87x_init+0x0/0x29()
[   33.990038] Calling initcall 0x40895751: alsa_card_cmipci_init+0x0/0x11()
[   33.996929] initcall 0x40895751: alsa_card_cmipci_init+0x0/0x11() returned 0.
[   34.003916] initcall 0x40895751 ran for 0 msecs: alsa_card_cmipci_init+0x0/0x11()
[   34.011363] Calling initcall 0x40895762: alsa_card_ens137x_init+0x0/0x11()
[   34.018331] initcall 0x40895762: alsa_card_ens137x_init+0x0/0x11() returned 0.
[   34.025396] initcall 0x40895762 ran for 0 msecs: alsa_card_ens137x_init+0x0/0x11()
[   34.032941] Calling initcall 0x40895773: alsa_card_es1938_init+0x0/0x11()
[   34.039821] initcall 0x40895773: alsa_card_es1938_init+0x0/0x11() returned 0.
[   34.046814] initcall 0x40895773 ran for 0 msecs: alsa_card_es1938_init+0x0/0x11()
[   34.054253] Calling initcall 0x40895784: alsa_card_es1968_init+0x0/0x11()
[   34.061140] initcall 0x40895784: alsa_card_es1968_init+0x0/0x11() returned 0.
[   34.068117] initcall 0x40895784 ran for 0 msecs: alsa_card_es1968_init+0x0/0x11()
[   34.075579] Calling initcall 0x40895795: alsa_card_intel8x0_init+0x0/0x11()
[   34.082696] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   34.402711] intel8x0_measure_ac97_clock: measured 50474 usecs
[   34.408332] intel8x0: clocking to 46892
[   34.414499] initcall 0x40895795: alsa_card_intel8x0_init+0x0/0x11() returned 0.
[   34.421655] initcall 0x40895795 ran for 314 msecs: alsa_card_intel8x0_init+0x0/0x11()
[   34.429461] Calling initcall 0x408957a6: alsa_card_rme32_init+0x0/0x11()
[   34.436319] initcall 0x408957a6: alsa_card_rme32_init+0x0/0x11() returned 0.
[   34.443289] initcall 0x408957a6 ran for 0 msecs: alsa_card_rme32_init+0x0/0x11()
[   34.450573] Calling initcall 0x408957b7: alsa_card_rme96_init+0x0/0x11()
[   34.457373] initcall 0x408957b7: alsa_card_rme96_init+0x0/0x11() returned 0.
[   34.464262] initcall 0x408957b7 ran for 0 msecs: alsa_card_rme96_init+0x0/0x11()
[   34.471635] Calling initcall 0x408957c8: alsa_ac97_init+0x0/0x3()
[   34.477703] initcall 0x408957c8: alsa_ac97_init+0x0/0x3() returned 0.
[   34.484108] initcall 0x408957c8 ran for 0 msecs: alsa_ac97_init+0x0/0x3()
[   34.490877] Calling initcall 0x408957cb: alsa_card_ca0106_init+0x0/0x11()
[   34.497762] initcall 0x408957cb: alsa_card_ca0106_init+0x0/0x11() returned 0.
[   34.504736] initcall 0x408957cb ran for 0 msecs: alsa_card_ca0106_init+0x0/0x11()
[   34.512193] Calling initcall 0x408957dc: alsa_card_cs46xx_init+0x0/0x11()
[   34.519077] initcall 0x408957dc: alsa_card_cs46xx_init+0x0/0x11() returned 0.
[   34.526051] initcall 0x408957dc ran for 0 msecs: alsa_card_cs46xx_init+0x0/0x11()
[   34.533516] Calling initcall 0x408957ed: alsa_card_echo_init+0x0/0x11()
[   34.540229] initcall 0x408957ed: alsa_card_echo_init+0x0/0x11() returned 0.
[   34.547047] initcall 0x408957ed ran for 0 msecs: alsa_card_echo_init+0x0/0x11()
[   34.554315] Calling initcall 0x408957fe: alsa_card_echo_init+0x0/0x11()
[   34.561101] initcall 0x408957fe: alsa_card_echo_init+0x0/0x11() returned 0.
[   34.567918] initcall 0x408957fe ran for 0 msecs: alsa_card_echo_init+0x0/0x11()
[   34.575190] Calling initcall 0x4089580f: alsa_card_echo_init+0x0/0x11()
[   34.581904] initcall 0x4089580f: alsa_card_echo_init+0x0/0x11() returned 0.
[   34.588711] initcall 0x4089580f ran for 0 msecs: alsa_card_echo_init+0x0/0x11()
[   34.595994] Calling initcall 0x40895820: alsa_card_echo_init+0x0/0x11()
[   34.602716] initcall 0x40895820: alsa_card_echo_init+0x0/0x11() returned 0.
[   34.609518] initcall 0x40895820 ran for 2 msecs: alsa_card_echo_init+0x0/0x11()
[   34.617264] Calling initcall 0x40895831: alsa_card_ice1712_init+0x0/0x11()
[   34.624237] initcall 0x40895831: alsa_card_ice1712_init+0x0/0x11() returned 0.
[   34.631319] initcall 0x40895831 ran for 0 msecs: alsa_card_ice1712_init+0x0/0x11()
[   34.638850] Calling initcall 0x40895842: alsa_ice1712_akm4xxx_module_init+0x0/0x3()
[   34.646476] initcall 0x40895842: alsa_ice1712_akm4xxx_module_init+0x0/0x3() returned 0.
[   34.654441] initcall 0x40895842 ran for 0 msecs: alsa_ice1712_akm4xxx_module_init+0x0/0x3()
[   34.662769] Calling initcall 0x40895845: alsa_card_ice1724_init+0x0/0x11()
[   34.669735] initcall 0x40895845: alsa_card_ice1724_init+0x0/0x11() returned 0.
[   34.676803] initcall 0x40895845 ran for 0 msecs: alsa_card_ice1724_init+0x0/0x11()
[   34.684345] Calling initcall 0x40895856: pcxhr_module_init+0x0/0x11()
[   34.690896] initcall 0x40895856: pcxhr_module_init+0x0/0x11() returned 0.
[   34.697523] initcall 0x40895856 ran for 0 msecs: pcxhr_module_init+0x0/0x11()
[   34.704634] Calling initcall 0x40895867: alsa_card_riptide_init+0x0/0x53()
[   34.711732] initcall 0x40895867: alsa_card_riptide_init+0x0/0x53() returned 0.
[   34.718812] initcall 0x40895867 ran for 0 msecs: alsa_card_riptide_init+0x0/0x53()
[   34.726337] Calling initcall 0x408958ba: alsa_card_hdspm_init+0x0/0x11()
[   34.733197] initcall 0x408958ba: alsa_card_hdspm_init+0x0/0x11() returned 0.
[   34.740088] initcall 0x408958ba ran for 0 msecs: alsa_card_hdspm_init+0x0/0x11()
[   34.747464] Calling initcall 0x408958cb: alsa_card_trident_init+0x0/0x11()
[   34.754431] initcall 0x408958cb: alsa_card_trident_init+0x0/0x11() returned 0.
[   34.761496] initcall 0x408958cb ran for 0 msecs: alsa_card_trident_init+0x0/0x11()
[   34.769043] Calling initcall 0x408958dc: alsa_trident_synth_init+0x0/0x14()
[   34.776001] initcall 0x408958dc: alsa_trident_synth_init+0x0/0x14() returned 0.
[   34.783252] initcall 0x408958dc ran for 0 msecs: alsa_trident_synth_init+0x0/0x14()
[   34.790881] Calling initcall 0x408958f0: alsa_util_mem_init+0x0/0x3()
[   34.797293] initcall 0x408958f0: alsa_util_mem_init+0x0/0x3() returned 0.
[   34.804044] initcall 0x408958f0 ran for 0 msecs: alsa_util_mem_init+0x0/0x3()
[   34.811160] Calling initcall 0x4052eb4b: snd_soc_init+0x0/0x23()
[   34.817134] ASoC version 0.13.1
[   34.820372] initcall 0x4052eb4b: snd_soc_init+0x0/0x23() returned 0.
[   34.826576] initcall 0x4052eb4b ran for 5 msecs: snd_soc_init+0x0/0x23()
[   34.833252] Calling initcall 0x408958fd: alsa_sound_last_init+0x0/0x56()
[   34.839925] ALSA device list:
[   34.842878]   #0: Dummy 1
[   34.845470]   #1: NVidia CK804 with ALC850 at irq 3
[   34.850334] initcall 0x408958fd: alsa_sound_last_init+0x0/0x56() returned 0.
[   34.857343] initcall 0x408958fd ran for 6 msecs: alsa_sound_last_init+0x0/0x56()
[   34.864716] Calling initcall 0x40896e8f: flow_cache_init+0x0/0xf2()
[   34.870960] initcall 0x40896e8f: flow_cache_init+0x0/0xf2() returned 0.
[   34.877535] initcall 0x40896e8f ran for 0 msecs: flow_cache_init+0x0/0xf2()
[   34.884471] Calling initcall 0x40896f81: pg_init+0x0/0x232()
[   34.890103] pktgen v2.69: Packet Generator for packet performance testing.
[   34.897041] initcall 0x40896f81: pg_init+0x0/0x232() returned 0.
[   34.902939] initcall 0x40896f81 ran for 0 msecs: pg_init+0x0/0x232()
[   34.909254] Calling initcall 0x4089723b: llc_init+0x0/0x69()
[   34.914893] initcall 0x4089723b: llc_init+0x0/0x69() returned 0.
[   34.920865] initcall 0x4089723b ran for 0 msecs: llc_init+0x0/0x69()
[   34.927196] Calling initcall 0x40897302: llc2_init+0x0/0xb4()
[   34.933007] NET: Registered protocol family 26
[   34.937343] initcall 0x40897302: llc2_init+0x0/0xb4() returned 0.
[   34.943403] initcall 0x40897302 ran for 2 msecs: llc2_init+0x0/0xb4()
[   34.949810] Calling initcall 0x40897560: snap_init+0x0/0x2b()
[   34.955557] initcall 0x40897560: snap_init+0x0/0x2b() returned 0.
[   34.961597] initcall 0x40897560 ran for 0 msecs: snap_init+0x0/0x2b()
[   34.968013] Calling initcall 0x40897840: nfnetlink_init+0x0/0x62()
[   34.974163] Netfilter messages via NETLINK v0.30.
[   34.978863] initcall 0x40897840: nfnetlink_init+0x0/0x62() returned 0.
[   34.985342] initcall 0x40897840 ran for 3 msecs: nfnetlink_init+0x0/0x62()
[   34.992192] Calling initcall 0x408978a2: nfnetlink_log_init+0x0/0x89()
[   34.998725] initcall 0x408978a2: nfnetlink_log_init+0x0/0x89() returned 0.
[   35.005534] initcall 0x408978a2 ran for 0 msecs: nfnetlink_log_init+0x0/0x89()
[   35.012733] Calling initcall 0x4089792b: xt_init+0x0/0x71()
[   35.018288] initcall 0x4089792b: xt_init+0x0/0x71() returned 0.
[   35.024163] initcall 0x4089792b ran for 0 msecs: xt_init+0x0/0x71()
[   35.030402] Calling initcall 0x4089799c: xt_tcpudp_init+0x0/0xf()
[   35.036497] initcall 0x4089799c: xt_tcpudp_init+0x0/0xf() returned 0.
[   35.042888] initcall 0x4089799c ran for 0 msecs: xt_tcpudp_init+0x0/0xf()
[   35.049644] Calling initcall 0x408979ab: xt_classify_init+0x0/0xf()
[   35.055890] initcall 0x408979ab: xt_classify_init+0x0/0xf() returned 0.
[   35.062467] initcall 0x408979ab ran for 0 msecs: xt_classify_init+0x0/0xf()
[   35.069403] Calling initcall 0x408979ba: xt_mark_init+0x0/0xf()
[   35.075302] initcall 0x408979ba: xt_mark_init+0x0/0xf() returned 0.
[   35.081535] initcall 0x408979ba ran for 0 msecs: xt_mark_init+0x0/0xf()
[   35.088127] Calling initcall 0x408979c9: xt_nflog_init+0x0/0xf()
[   35.094108] initcall 0x408979c9: xt_nflog_init+0x0/0xf() returned 0.
[   35.100425] initcall 0x408979c9 ran for 0 msecs: xt_nflog_init+0x0/0xf()
[   35.107105] Calling initcall 0x408979d8: xt_nfqueue_init+0x0/0xf()
[   35.113260] initcall 0x408979d8: xt_nfqueue_init+0x0/0xf() returned 0.
[   35.119757] initcall 0x408979d8 ran for 0 msecs: xt_nfqueue_init+0x0/0xf()
[   35.126599] Calling initcall 0x408979e7: xt_dccp_init+0x0/0x44()
[   35.132586] initcall 0x408979e7: xt_dccp_init+0x0/0x44() returned 0.
[   35.138909] initcall 0x408979e7 ran for 0 msecs: xt_dccp_init+0x0/0x44()
[   35.145579] Calling initcall 0x40897a2b: xt_dscp_match_init+0x0/0xf()
[   35.151997] initcall 0x40897a2b: xt_dscp_match_init+0x0/0xf() returned 0.
[   35.158754] initcall 0x40897a2b ran for 0 msecs: xt_dscp_match_init+0x0/0xf()
[   35.165857] Calling initcall 0x40897a3a: xt_limit_init+0x0/0xf()
[   35.171843] initcall 0x40897a3a: xt_limit_init+0x0/0xf() returned 0.
[   35.178160] initcall 0x40897a3a ran for 0 msecs: xt_limit_init+0x0/0xf()
[   35.184836] Calling initcall 0x40897a49: xt_mark_init+0x0/0xf()
[   35.190741] initcall 0x40897a49: xt_mark_init+0x0/0xf() returned 0.
[   35.196968] initcall 0x40897a49 ran for 0 msecs: xt_mark_init+0x0/0xf()
[   35.203559] Calling initcall 0x40897a58: xt_multiport_init+0x0/0xf()
[   35.209888] initcall 0x40897a58: xt_multiport_init+0x0/0xf() returned 0.
[   35.216551] initcall 0x40897a58 ran for 0 msecs: xt_multiport_init+0x0/0xf()
[   35.223578] Calling initcall 0x40897a67: xt_physdev_init+0x0/0xf()
[   35.229732] initcall 0x40897a67: xt_physdev_init+0x0/0xf() returned 0.
[   35.236223] initcall 0x40897a67 ran for 0 msecs: xt_physdev_init+0x0/0xf()
[   35.243076] Calling initcall 0x40897a76: xt_pkttype_init+0x0/0xf()
[   35.249231] initcall 0x40897a76: xt_pkttype_init+0x0/0xf() returned 0.
[   35.255731] initcall 0x40897a76 ran for 0 msecs: xt_pkttype_init+0x0/0xf()
[   35.262571] Calling initcall 0x40897a85: xt_quota_init+0x0/0xf()
[   35.268556] initcall 0x40897a85: xt_quota_init+0x0/0xf() returned 0.
[   35.274880] initcall 0x40897a85 ran for 0 msecs: xt_quota_init+0x0/0xf()
[   35.281549] Calling initcall 0x40897a94: xt_statistic_init+0x0/0xf()
[   35.287882] initcall 0x40897a94: xt_statistic_init+0x0/0xf() returned 0.
[   35.294546] initcall 0x40897a94 ran for 0 msecs: xt_statistic_init+0x0/0xf()
[   35.301568] Calling initcall 0x4089889e: ipip_init+0x0/0x8f()
[   35.307289] IPv4 over IPv4 tunneling driver
[   35.312283] initcall 0x4089889e: ipip_init+0x0/0x8f() returned 0.
[   35.318222] initcall 0x4089889e ran for 4 msecs: ipip_init+0x0/0x8f()
[   35.324634] Calling initcall 0x40898966: init_syncookies+0x0/0x12()
[   35.330929] initcall 0x40898966: init_syncookies+0x0/0x12() returned 0.
[   35.337464] initcall 0x40898966 ran for 0 msecs: init_syncookies+0x0/0x12()
[   35.344400] Calling initcall 0x40898978: esp4_init+0x0/0x5d()
[   35.350123] initcall 0x40898978: esp4_init+0x0/0x5d() returned 0.
[   35.356179] initcall 0x40898978 ran for 0 msecs: esp4_init+0x0/0x5d()
[   35.362592] Calling initcall 0x408989d5: xfrm4_beet_init+0x0/0xf()
[   35.368756] initcall 0x408989d5: xfrm4_beet_init+0x0/0xf() returned 0.
[   35.375252] initcall 0x408989d5 ran for 0 msecs: xfrm4_beet_init+0x0/0xf()
[   35.382094] Calling initcall 0x408989e4: tunnel4_init+0x0/0x2d()
[   35.388079] initcall 0x408989e4: tunnel4_init+0x0/0x2d() returned 0.
[   35.394397] initcall 0x408989e4 ran for 0 msecs: tunnel4_init+0x0/0x2d()
[   35.401073] Calling initcall 0x40898a11: xfrm4_tunnel_init+0x0/0xf()
[   35.407405] initcall 0x40898a11: xfrm4_tunnel_init+0x0/0xf() returned 0.
[   35.414069] initcall 0x40898a11 ran for 0 msecs: xfrm4_tunnel_init+0x0/0xf()
[   35.421099] Calling initcall 0x40590b24: ipv4_netfilter_init+0x0/0xa()
[   35.427615] initcall 0x40590b24: ipv4_netfilter_init+0x0/0xa() returned 0.
[   35.434435] initcall 0x40590b24 ran for 0 msecs: ipv4_netfilter_init+0x0/0xa()
[   35.441630] Calling initcall 0x408993ce: arp_tables_init+0x0/0x71()
[   35.447895] arp_tables: (C) 2002 David S. Miller
[   35.452473] initcall 0x408993ce: arp_tables_init+0x0/0x71() returned 0.
[   35.459055] initcall 0x408993ce ran for 4 msecs: arp_tables_init+0x0/0x71()
[   35.465983] Calling initcall 0x4089943f: ip_queue_init+0x0/0x122()
[   35.472185] initcall 0x4089943f: ip_queue_init+0x0/0x122() returned 0.
[   35.478632] initcall 0x4089943f ran for 0 msecs: ip_queue_init+0x0/0x122()
[   35.485480] Calling initcall 0x40899561: inet_diag_init+0x0/0x6b()
[   35.491653] initcall 0x40899561: inet_diag_init+0x0/0x6b() returned 0.
[   35.498130] initcall 0x40899561 ran for 0 msecs: inet_diag_init+0x0/0x6b()
[   35.504987] Calling initcall 0x408995cc: tcp_diag_init+0x0/0xa()
[   35.510980] initcall 0x408995cc: tcp_diag_init+0x0/0xa() returned 0.
[   35.517285] initcall 0x408995cc ran for 0 msecs: tcp_diag_init+0x0/0xa()
[   35.523964] Calling initcall 0x408995d6: cubictcp_register+0x0/0x8f()
[   35.530374] TCP cubic registered
[   35.533590] initcall 0x408995d6: cubictcp_register+0x0/0x8f() returned 0.
[   35.540335] initcall 0x408995d6 ran for 1 msecs: cubictcp_register+0x0/0x8f()
[   35.547448] Calling initcall 0x408998a9: af_unix_init+0x0/0x5c()
[   35.553427] NET: Registered protocol family 1
[   35.557791] initcall 0x408998a9: af_unix_init+0x0/0x5c() returned 0.
[   35.564080] initcall 0x408998a9 ran for 2 msecs: af_unix_init+0x0/0x5c()
[   35.570763] Calling initcall 0x40899905: packet_init+0x0/0x47()
[   35.576653] NET: Registered protocol family 17
[   35.581102] initcall 0x40899905: packet_init+0x0/0x47() returned 0.
[   35.587312] initcall 0x40899905 ran for 0 msecs: packet_init+0x0/0x47()
[   35.593894] Calling initcall 0x4089994c: ipsec_pfkey_init+0x0/0x80()
[   35.600222] NET: Registered protocol family 15
[   35.604668] initcall 0x4089994c: ipsec_pfkey_init+0x0/0x80() returned 0.
[   35.611317] initcall 0x4089994c ran for 0 msecs: ipsec_pfkey_init+0x0/0x80()
[   35.618332] Calling initcall 0x408999cc: br_init+0x0/0xb8()
[   35.623970] Bridge firewalling registered
[   35.627895] initcall 0x408999cc: br_init+0x0/0xb8() returned 0.
[   35.633758] initcall 0x408999cc ran for 3 msecs: br_init+0x0/0xb8()
[   35.640001] Calling initcall 0x40899ca1: econet_proto_init+0x0/0x2b()
[   35.646413] NET: Registered protocol family 19
[   35.651276] initcall 0x40899ca1: econet_proto_init+0x0/0x2b() returned 0.
[   35.658021] initcall 0x40899ca1 ran for 3 msecs: econet_proto_init+0x0/0x2b()
[   35.665136] Calling initcall 0x40899ccc: vlan_proto_init+0x0/0xb8()
[   35.671371] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   35.678137] All bugs added by David S. Miller <davem@redhat.com>
[   35.684142] initcall 0x40899ccc: vlan_proto_init+0x0/0xb8() returned 0.
[   35.690699] initcall 0x40899ccc ran for 8 msecs: vlan_proto_init+0x0/0xb8()
[   35.697628] Calling initcall 0x40899dd6: sctp_init+0x0/0x666()
[   35.708330] SCTP: Hash tables configured (established 32768 bind 29127)
[   35.742719] initcall 0x40899dd6: sctp_init+0x0/0x666() returned 0.
[   35.748741] initcall 0x40899dd6 ran for 33 msecs: sctp_init+0x0/0x666()
[   35.755332] Calling initcall 0x4089a4ef: ieee80211_init+0x0/0x1f()
[   35.761481] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   35.768072] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   35.776397] initcall 0x4089a4ef: ieee80211_init+0x0/0x1f() returned 0.
[   35.782890] initcall 0x4089a4ef ran for 8 msecs: ieee80211_init+0x0/0x1f()
[   35.789731] Calling initcall 0x4089a50e: ieee80211_crypto_init+0x0/0xa()
[   35.796437] ieee80211_crypt: registered algorithm 'NULL'
[   35.801701] initcall 0x4089a50e: ieee80211_crypto_init+0x0/0xa() returned 0.
[   35.808710] initcall 0x4089a50e ran for 1 msecs: ieee80211_crypto_init+0x0/0xa()
[   35.816079] Calling initcall 0x4089a518: ieee80211_crypto_wep_init+0x0/0xa()
[   35.823098] ieee80211_crypt: registered algorithm 'WEP'
[   35.828306] initcall 0x4089a518: ieee80211_crypto_wep_init+0x0/0xa() returned 0.
[   35.835666] initcall 0x4089a518 ran for 4 msecs: ieee80211_crypto_wep_init+0x0/0xa()
[   35.843381] Calling initcall 0x4089a522: ieee80211_crypto_tkip_init+0x0/0xa()
[   35.850485] ieee80211_crypt: registered algorithm 'TKIP'
[   35.855778] initcall 0x4089a522: ieee80211_crypto_tkip_init+0x0/0xa() returned 0.
[   35.863223] initcall 0x4089a522 ran for 4 msecs: ieee80211_crypto_tkip_init+0x0/0xa()
[   35.871026] Calling initcall 0x4089a52c: tipc_init+0x0/0xa0()
[   35.876760] TIPC: Activated (version 1.6.2 compiled Nov 13 2007 19:51:08)
[   35.885713] NET: Registered protocol family 30
[   35.890046] TIPC: Started in single node mode
[   35.894380] initcall 0x4089a52c: tipc_init+0x0/0xa0() returned 0.
[   35.900429] initcall 0x4089a52c ran for 11 msecs: tipc_init+0x0/0xa0()
[   35.906935] Calling initcall 0x4089a63c: init_p9+0x0/0x31()
[   35.912494] Installing 9P2000 support
[   35.916224] initcall 0x4089a63c: init_p9+0x0/0x31() returned 0.
[   35.922008] initcall 0x4089a63c ran for 3 msecs: init_p9+0x0/0x31()
[   35.928254] Calling initcall 0x4087b865: powernow_init+0x0/0x121()
[   35.934409] initcall 0x4087b865: powernow_init+0x0/0x121() returned -19.
[   35.941076] initcall 0x4087b865 ran for 0 msecs: powernow_init+0x0/0x121()
[   35.947927] Calling initcall 0x4087bdca: powernowk8_init+0x0/0x48()
[   35.954165] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (1 cpu cores) (version 2.00.00)
[   35.969448] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[   35.975430] initcall 0x4087bdca: powernowk8_init+0x0/0x48() returned -19.
[   35.982168] initcall 0x4087bdca ran for 11 msecs: powernowk8_init+0x0/0x48()
[   35.989190] Calling initcall 0x4087c64e: centrino_init+0x0/0x19()
[   35.995261] initcall 0x4087c64e: centrino_init+0x0/0x19() returned -19.
[   36.001843] initcall 0x4087c64e ran for 0 msecs: centrino_init+0x0/0x19()
[   36.008607] Calling initcall 0x4087e0be: init_lapic_nmi_sysfs+0x0/0x2d()
[   36.015555] initcall 0x4087e0be: init_lapic_nmi_sysfs+0x0/0x2d() returned 0.
[   36.022440] initcall 0x4087e0be ran for 0 msecs: init_lapic_nmi_sysfs+0x0/0x2d()
[   36.029809] Calling initcall 0x4087e0eb: check_nmi_watchdog+0x0/0x11c()
[   36.036396] Testing NMI watchdog ... OK.
[   36.139488] initcall 0x4087e0eb: check_nmi_watchdog+0x0/0x11c() returned 0.
[   36.146417] initcall 0x4087e0eb ran for 98 msecs: check_nmi_watchdog+0x0/0x11c()
[   36.153785] Calling initcall 0x4087e306: io_apic_bug_finalize+0x0/0x18()
[   36.160464] initcall 0x4087e306: io_apic_bug_finalize+0x0/0x18() returned 0.
[   36.167483] initcall 0x4087e306 ran for 0 msecs: io_apic_bug_finalize+0x0/0x18()
[   36.174852] Calling initcall 0x4088187d: print_ipi_mode+0x0/0x2c()
[   36.180999] Using IPI Shortcut mode
[   36.184472] initcall 0x4088187d: print_ipi_mode+0x0/0x2c() returned 0.
[   36.190968] initcall 0x4088187d ran for 7 msecs: print_ipi_mode+0x0/0x2c()
[   36.197810] Calling initcall 0x40882135: disable_boot_consoles+0x0/0x3e()
[   36.204574] initcall 0x40882135: disable_boot_consoles+0x0/0x3e() returned 0.
[   36.211679] initcall 0x40882135 ran for 0 msecs: disable_boot_consoles+0x0/0x3e()
[   36.219136] Calling initcall 0x40883f6e: taskstats_init+0x0/0x81()
[   36.225305] registered taskstats version 1
[   36.229366] initcall 0x40883f6e: taskstats_init+0x0/0x81() returned 0.
[   36.235859] initcall 0x40883f6e ran for 2 msecs: taskstats_init+0x0/0x81()
[   36.242707] Calling initcall 0x40888ca4: random32_reseed+0x0/0x20()
[   36.248952] initcall 0x40888ca4: random32_reseed+0x0/0x20() returned 0.
[   36.255531] initcall 0x40888ca4 ran for 0 msecs: random32_reseed+0x0/0x20()
[   36.262459] Calling initcall 0x40889250: pci_sysfs_init+0x0/0x31()
[   36.268790] initcall 0x40889250: pci_sysfs_init+0x0/0x31() returned 0.
[   36.275168] initcall 0x40889250 ran for 0 msecs: pci_sysfs_init+0x0/0x31()
[   36.282010] Calling initcall 0x4088b05a: seqgen_init+0x0/0xa()
[   36.287840] initcall 0x4088b05a: seqgen_init+0x0/0xa() returned 0.
[   36.293967] initcall 0x4088b05a ran for 0 msecs: seqgen_init+0x0/0xa()
[   36.300472] Calling initcall 0x403aeba1: scsi_complete_async_scans+0x0/0xcf()
[   36.307581] initcall 0x403aeba1: scsi_complete_async_scans+0x0/0xcf() returned 0.
[   36.315032] initcall 0x403aeba1 ran for 0 msecs: scsi_complete_async_scans+0x0/0xcf()
[   36.322836] Calling initcall 0x4089812b: tcp_congestion_default+0x0/0xa()
[   36.329593] initcall 0x4089812b: tcp_congestion_default+0x0/0xa() returned 0.
[   36.336693] initcall 0x4089812b ran for 0 msecs: tcp_congestion_default+0x0/0xa()
[   36.344149] Calling initcall 0x40898cda: ip_auto_config+0x0/0x6f4()
[   36.350394] initcall 0x40898cda: ip_auto_config+0x0/0x6f4() returned 0.
[   36.356972] initcall 0x40898cda ran for 0 msecs: ip_auto_config+0x0/0x6f4()
[   36.365470] EXT3-fs: INFO: recovery required on readonly filesystem.
[   36.371705] EXT3-fs: write access will be enabled during recovery.
[   37.156813] kjournald starting.  Commit interval 5 seconds
[   37.162232] EXT3-fs: recovery complete.
[   37.166769] EXT3-fs: mounted filesystem with ordered data mode.
[   37.172603] VFS: Mounted root (ext3 filesystem) readonly.
[   37.178236] Freeing unused kernel memory: 264k freed
[   37.183156] Write protecting the kernel text: 5068k
[   37.187962] Write protecting the kernel read-only data: 1867k
[   37.225986] khelper used greatest stack depth: 2348 bytes left
[   37.866316] mount used greatest stack depth: 1860 bytes left
[   53.848798] eth1: link down
[   57.971788] IPv4 FIB: Using LC-trie version 0.408
[   60.494731] EXT3 FS on sda1, internal journal
[   60.540901] kjournald starting.  Commit interval 5 seconds
[   60.546594] EXT3 FS on sda5, internal journal
[   60.550818] EXT3-fs: mounted filesystem with ordered data mode.
[   61.245190] rc.sysinit used greatest stack depth: 1680 bytes left
[   61.386859] list_add corruption. prev->next should be next (407d973c), but was 418cf818. (prev=41877098).
[   61.396328] ------------[ cut here ]------------
[   61.400910] kernel BUG at lib/list_debug.c:33!
[   61.405330] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
[   61.410356] 
[   61.411831] Pid: 1191, comm: rc Not tainted (2.6.24-rc2 #183)
[   61.417550] EIP: 0060:[<402dd7f0>] EFLAGS: 00010012 CPU: 0
[   61.423012] EIP is at __list_add+0x47/0x5a
[   61.427082] EAX: 00000070 EBX: 407d973c ECX: 4011fb14 EDX: 7ccfc000
[   61.433321] ESI: 000001a2 EDI: 41877098 EBP: 7ccd6cbc ESP: 7c505d74
[   61.439562]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[   61.444934] Process rc (pid: 1191, ti=7c505000 task=7ccfc000 task.ti=7c505000)
[   61.451953] Stack: 4075bfb7 407d973c 418cf818 41877098 41886ac0 4016476c 00000004 00000050 
[   61.460273]        00000344 00000202 40176992 ffffffff 7f93d340 00000050 000efcf8 40164882 
[   61.468593]        ffffffff 000efcf8 7f88e1c8 42d7e6d8 401aa323 40176b3c 401757b7 000efcf8 
[   61.476912] Call Trace:
[   61.479512]  [<4016476c>] slob_alloc+0x76/0x16c
[   61.484019]  [<40176992>] ifind_fast+0x16/0x85
[   61.488439]  [<40164882>] kmem_cache_alloc_node+0x20/0x4d
[   61.493811]  [<401aa323>] ext3_alloc_inode+0x12/0x46
[   61.498751]  [<40176b3c>] alloc_inode+0x15/0x1fa
[   61.503344]  [<401757b7>] d_alloc+0x174/0x19f
[   61.507676]  [<401772a6>] iget_locked+0x3f/0x111
[   61.512270]  [<401aa056>] ext3_lookup+0x6a/0xe4
[   61.516776]  [<4016cd45>] do_lookup+0xa8/0x145
[   61.521196]  [<4016e74d>] __link_path_walk+0x751/0xb51
[   61.526309]  [<4013b203>] __lock_acquire+0xce1/0xcfd
[   61.531249]  [<4016eb8f>] link_path_walk+0x42/0xaf
[   61.536015]  [<405f154b>] _spin_unlock_irq+0x20/0x2c
[   61.540954]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   61.546154]  [<40104e39>] sysenter_past_esp+0xb2/0xc1
[   61.551614]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   61.556813]  [<4016ee7c>] do_path_lookup+0x15e/0x1c0
[   61.561754]  [<4016df38>] getname+0x5c/0xaa
[   61.565913]  [<4016f642>] __user_walk_fd+0x2f/0x40
[   61.570680]  [<40165b45>] sys_faccessat+0x99/0x12d
[   61.575446]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   61.580645]  [<40104e39>] sysenter_past_esp+0xb2/0xc1
[   61.585672]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   61.590871]  [<40165bf8>] sys_access+0x1f/0x23
[   61.595293]  [<40104df2>] sysenter_past_esp+0x6b/0xc1
[   61.600318]  =======================
[   61.603871] Code: 67 bf 75 40 e8 7e 28 e4 ff 0f 0b eb fe 8b 10 39 ca 74 1c 89 54 24 08 89 4c 24 04 89 44 24 0c c7 04 24 b7 bf 75 40 e8 5c 28 e4 ff <0f> 0b eb fe 89 5a 04 89 13 89 43 04 89 18 83 c4 10 5b c3 8b 0a 
[   61.622676] EIP: [<402dd7f0>] __list_add+0x47/0x5a SS:ESP 0068:7c505d74
[   61.629266] BUG: sleeping function called from invalid context at kernel/rwsem.c:20
[   61.636889] in_atomic():0, irqs_disabled():1
[   61.641135] INFO: lockdep is turned off.
[   61.645035] irq event stamp: 16016
[   61.648414] hardirqs last  enabled at (16015): [<4013a236>] debug_check_no_locks_freed+0x13a/0x14e
[   61.657340] hardirqs last disabled at (16016): [<405f15a6>] _spin_lock_irqsave+0x23/0x75
[   61.665400] softirqs last  enabled at (15714): [<4010700b>] do_softirq+0x60/0xdd
[   61.672766] softirqs last disabled at (15703): [<4010700b>] do_softirq+0x60/0xdd
[   61.680133]  [<401323db>] down_read+0x19/0x74
[   61.684466]  [<40131cf7>] hrtimer_try_to_cancel+0x4e/0x56
[   61.689839]  [<401419f5>] acct_collect+0x30/0x13f
[   61.694518]  [<4012211c>] do_exit+0x1c0/0x6aa
[   61.698851]  [<40105f8d>] show_registers+0x150/0x158
[   61.703791]  [<4032c603>] do_unblank_screen+0x2a/0x120
[   61.708904]  [<4010618c>] die+0x1f7/0x1fe
[   61.712891]  [<40106445>] do_invalid_op+0x0/0x8a
[   61.717483]  [<401064c6>] do_invalid_op+0x81/0x8a
[   61.722164]  [<402dd7f0>] __list_add+0x47/0x5a
[   61.726584]  [<4011fb14>] release_console_sem+0x1ab/0x1c4
[   61.731956]  [<40106cfc>] do_nmi+0x81/0x23e
[   61.736116]  [<405f17f2>] error_code+0x6a/0x70
[   61.740535]  [<4011fb14>] release_console_sem+0x1ab/0x1c4
[   61.745908]  [<402dd7f0>] __list_add+0x47/0x5a
[   61.750328]  [<4016476c>] slob_alloc+0x76/0x16c
[   61.754834]  [<40176992>] ifind_fast+0x16/0x85
[   61.759255]  [<40164882>] kmem_cache_alloc_node+0x20/0x4d
[   61.764628]  [<401aa323>] ext3_alloc_inode+0x12/0x46
[   61.769567]  [<40176b3c>] alloc_inode+0x15/0x1fa
[   61.774160]  [<401757b7>] d_alloc+0x174/0x19f
[   61.778493]  [<401772a6>] iget_locked+0x3f/0x111
[   61.783087]  [<401aa056>] ext3_lookup+0x6a/0xe4
[   61.787593]  [<4016cd45>] do_lookup+0xa8/0x145
[   61.792012]  [<4016e74d>] __link_path_walk+0x751/0xb51
[   61.797127]  [<4013b203>] __lock_acquire+0xce1/0xcfd
[   61.802065]  [<4016eb8f>] link_path_walk+0x42/0xaf
[   61.806832]  [<405f154b>] _spin_unlock_irq+0x20/0x2c
[   61.811771]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   61.816970]  [<40104e39>] sysenter_past_esp+0xb2/0xc1
[   61.821997]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   61.827196]  [<4016ee7c>] do_path_lookup+0x15e/0x1c0
[   61.832138]  [<4016df38>] getname+0x5c/0xaa
[   61.836296]  [<4016f642>] __user_walk_fd+0x2f/0x40
[   61.841063]  [<40165b45>] sys_faccessat+0x99/0x12d
[   61.845829]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   61.851029]  [<40104e39>] sysenter_past_esp+0xb2/0xc1
[   61.856056]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   61.861254]  [<40165bf8>] sys_access+0x1f/0x23
[   61.865674]  [<40104df2>] sysenter_past_esp+0x6b/0xc1
[   61.870700]  =======================
[   66.916889] NMI watchdog detected lockup on CPU#0 (50000/50000)
[   66.922675] 
[   66.924150] Pid: 1191, comm: rc Tainted: G      D (2.6.24-rc2 #183)
[   66.930389] EIP: 0060:[<402dafb0>] EFLAGS: 00000046 CPU: 0
[   66.935850] EIP is at delay_tsc+0x1/0x3d
[   66.939748] EAX: 00000001 EBX: 407d971c ECX: 00000000 EDX: 00000021
[   66.945988] ESI: 0a35c0ea EDI: 00000001 EBP: 80e27be4 ESP: 7c505b9c
[   66.952227]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[   66.957600] CR0: 8005003b CR2: 08103018 CR3: 3f6d0000 CR4: 000006c0
[   66.963840] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[   66.970079] DR6: ffff0ff0 DR7: 00000400
[   66.973893]  [<402daf9a>] __delay+0x6/0x7
[   66.977878]  [<402dd3eb>] _raw_spin_lock+0x7e/0xd4
[   66.982645]  [<405f15e8>] _spin_lock_irqsave+0x65/0x75
[   66.987759]  [<401644c2>] slob_free+0x40/0x1ca
[   66.992178]  [<401644c2>] slob_free+0x40/0x1ca
[   66.996597]  [<4015d38f>] remove_vma+0x45/0x4a
[   67.001017]  [<4015d44c>] exit_mmap+0xb8/0xd2
[   67.005351]  [<4011dade>] mmput+0x36/0x6f
[   67.009337]  [<4012215b>] do_exit+0x1ff/0x6aa
[   67.013670]  [<40105f8d>] show_registers+0x150/0x158
[   67.018610]  [<4032c603>] do_unblank_screen+0x2a/0x120
[   67.023722]  [<4010618c>] die+0x1f7/0x1fe
[   67.027709]  [<40106445>] do_invalid_op+0x0/0x8a
[   67.032302]  [<401064c6>] do_invalid_op+0x81/0x8a
[   67.036982]  [<402dd7f0>] __list_add+0x47/0x5a
[   67.041401]  [<4011fb14>] release_console_sem+0x1ab/0x1c4
[   67.046774]  [<40106cfc>] do_nmi+0x81/0x23e
[   67.050935]  [<405f17f2>] error_code+0x6a/0x70
[   67.055354]  [<4011fb14>] release_console_sem+0x1ab/0x1c4
[   67.060727]  [<402dd7f0>] __list_add+0x47/0x5a
[   67.065147]  [<4016476c>] slob_alloc+0x76/0x16c
[   67.069653]  [<40176992>] ifind_fast+0x16/0x85
[   67.074072]  [<40164882>] kmem_cache_alloc_node+0x20/0x4d
[   67.079445]  [<401aa323>] ext3_alloc_inode+0x12/0x46
[   67.084385]  [<40176b3c>] alloc_inode+0x15/0x1fa
[   67.088978]  [<401757b7>] d_alloc+0x174/0x19f
[   67.093311]  [<401772a6>] iget_locked+0x3f/0x111
[   67.097904]  [<401aa056>] ext3_lookup+0x6a/0xe4
[   67.102410]  [<4016cd45>] do_lookup+0xa8/0x145
[   67.106831]  [<4016e74d>] __link_path_walk+0x751/0xb51
[   67.111943]  [<4013b203>] __lock_acquire+0xce1/0xcfd
[   67.116883]  [<4016eb8f>] link_path_walk+0x42/0xaf
[   67.121650]  [<405f154b>] _spin_unlock_irq+0x20/0x2c
[   67.126590]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   67.131789]  [<40104e39>] sysenter_past_esp+0xb2/0xc1
[   67.136815]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   67.142015]  [<4016ee7c>] do_path_lookup+0x15e/0x1c0
[   67.146954]  [<4016df38>] getname+0x5c/0xaa
[   67.151114]  [<4016f642>] __user_walk_fd+0x2f/0x40
[   67.155881]  [<40165b45>] sys_faccessat+0x99/0x12d
[   67.160647]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   67.165846]  [<40104e39>] sysenter_past_esp+0xb2/0xc1
[   67.170873]  [<4013a0bf>] trace_hardirqs_on+0x12e/0x16b
[   67.176072]  [<40165bf8>] sys_access+0x1f/0x23
[   67.180493]  [<40104df2>] sysenter_past_esp+0x6b/0xc1
[   67.185519]  =======================
[   67.189072] NMI watchdog running again ...
[   72.235742] NMI watchdog detected lockup on CPU#0 (50000/50000)
[   72.241533] 
[   72.243006] Pid: 1191, comm: rc Tainted: G      D (2.6.24-rc2 #183)
[   72.249245] EIP: 0060:[<402dd3ed>] EFLAGS: 00000883 CPU: 0
[   72.254706] EIP is at _raw_spin_lock+0x80/0xd4
[   72.259125] EAX: 00000008 EBX: 407d971c ECX: 00000000 EDX: 00000024
[   72.265365] ESI: 146b9588 EDI: 00000001 EBP: 80e27be4 ESP: 7c505ba8
[   72.271604]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[   72.276977] CR0: 8005003b CR2: 08103018 CR3: 3f6d0000 CR4: 000006c0
[   72.283217] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[   72.289456] DR6: ffff0ff0 DR7: 00000400
[   72.293269]  [<405f15e8>] _spin_lock_irqsave+0x65/0x75
[   72.298382]  [<401644c2>] slob_free+0x40/0x1ca
[   72.302802]  [<401644c2>] slob_free+0x40/0x1ca
[   72.307221]  [<4015d38f>] remove_vma+0x45/0x4a
[   72.311641]  [<4015d44c>] exit_mmap+0xb8/0xd2
[   72.315974]  [<4011dade>] mmput+0x36/0x6f
[   72.319960]  [<4012215b>] do_exit+0x1ff/0x6aa
[   72.324294]  [<40105f8d>] show_registers+0x150/0x158
[   72.329234]  [<4032c603>] do_unblank_screen+0x2a/0x120
[   72.334346]  [<4010618c>] die+0x1f7/0x1fe
[   72.338333]  [<40106445>] do_invalid_op+0x0/0x8a
[   72.342926]  [<401064c6>] do_invalid_op+0x81/0x8a
[   72.347605]  [<402dd7f0>] __list_add+0x47/0x5a
[   72.352026]  [<4011fb14>] release_console_sem+0x1ab/0x1c4
[   72.357399]  [<40106cfc>] do_nmi+0x81/0x23e

[-- Attachment #3: crash.log.config --]
[-- Type: text/plain, Size: 42017 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc2
# Tue Nov 13 19:50:36 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_BOOTPARAM_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not set
# CONFIG_BOOTPARAM_MAXCPUS_1 is not set
# CONFIG_BOOTPARAM_NOSMP is not set
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_BOOTPARAM_NO_HZ_OFF is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_BOOTPARAM_HIGHRES_OFF is not set
# CONFIG_SMP is not set
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
CONFIG_X86_GENERICARCH=y
# CONFIG_X86_ES7000 is not set
# CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_VMI=y
# CONFIG_LGUEST_GUEST is not set
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
# CONFIG_HPET_TIMER is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_1G=y
CONFIG_PAGE_OFFSET=0x40000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_COMPAT_VDSO=y
CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_0=y
CONFIG_BOOTPARAM_NMI_WATCHDOG_BIT_1=y
# CONFIG_BOOTPARAM_NOAPIC is not set
# CONFIG_BOOTPARAM_NOLAPIC is not set
CONFIG_BOOTPARAM_LAPIC=y
CONFIG_BOOTPARAM_HPET_DISABLE=y
CONFIG_BOOTPARAM_IDLE_MWAIT=y
CONFIG_BOOTPARAM_IDLE_POLL=y
# CONFIG_BOOTPARAM_HIGHMEM_512M is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_ACPI is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
CONFIG_X86_E_POWERSAVER=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_HT_IRQ is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
# CONFIG_SCx200 is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=y
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_ASK_IP_FIB_HASH is not set
CONFIG_IP_FIB_TRIE=y
# CONFIG_IP_FIB_HASH is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
CONFIG_VLAN_8021Q=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_ECONET=y
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=y
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=y
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=y
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
# CONFIG_IEEE80211_CRYPT_CCMP is not set
CONFIG_IEEE80211_CRYPT_TKIP=y
# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
# CONFIG_NET_9P_FD is not set
CONFIG_NET_9P_DEBUG=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=y
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
CONFIG_PATA_CS5536=y
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_TRIFLEX=y
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OPTI=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RZ1000 is not set
CONFIG_PATA_SC1200=y
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=y
# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_NETDEVICES is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_PCI=y
CONFIG_FORCEDETH=y
CONFIG_E100=y
CONFIG_8139TOO=y
CONFIG_E1000=y
CONFIG_MLX4_CORE=y
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
CONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set

#
# ISDN feature submodules
#
# CONFIG_ISDN_DRV_LOOP is not set
CONFIG_ISDN_DIVERSION=y

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set

#
# Active cards
#
CONFIG_ISDN_DRV_GIGASET=y
# CONFIG_GIGASET_BASE is not set
# CONFIG_GIGASET_M105 is not set
CONFIG_GIGASET_M101=y
CONFIG_GIGASET_DEBUG=y
CONFIG_GIGASET_UNDOCREQ=y
# CONFIG_ISDN_CAPI is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not set
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_WISTRON_BTNS=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=y
# CONFIG_MOXA_SMARTIO is not set
CONFIG_MOXA_SMARTIO_NEW=y
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
CONFIG_SPECIALIX_RTSCTS=y
CONFIG_SX=y
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_MWAVE=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_CS5535_GPIO=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_ATMEL=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
CONFIG_I2C_SAVAGE4=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=y
CONFIG_SENSORS_DS1374=y
CONFIG_DS1682=y
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
CONFIG_SENSORS_PCA9539=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_I2C_DEBUG_CHIP=y

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=y
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y

#
# Multimedia devices
#
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
# CONFIG_DRM is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
# CONFIG_FB_ARC is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_HECUBA=y
CONFIG_FB_HGA=y
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
# CONFIG_FB_I810_I2C is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
CONFIG_FB_INTEL=y
CONFIG_FB_INTEL_DEBUG=y
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_MATROX_MULTIHEAD is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
# CONFIG_FB_GEODE is not set
CONFIG_FB_SM501=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=y

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DUMMY=y
# CONFIG_SND_VIRMIDI is not set
CONFIG_SND_SERIAL_U16550=y
# CONFIG_SND_MPU401 is not set
CONFIG_SND_SB_COMMON=y

#
# PCI devices
#
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALS4000=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_ATIIXP_MODEM=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
CONFIG_SND_CMIPCI=y
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
CONFIG_SND_MIA=y
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
CONFIG_SND_INDIGODJ=y
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
CONFIG_SND_HDSPM=y
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=y
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
CONFIG_SND_SOC=y

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_TRIDENT is not set
CONFIG_AC97_BUS=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_DPCM is not set
CONFIG_USB_STORAGE_USBAT=y
# CONFIG_USB_STORAGE_SDDR09 is not set
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
CONFIG_USB_AUERSWALD=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGET=y
CONFIG_USB_PHIDGETKIT=y
CONFIG_USB_PHIDGETMOTORCONTROL=y
CONFIG_USB_PHIDGETSERVO=y
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_VIRTUALIZATION is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_DNOTIFY is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
# CONFIG_CRAMFS is not set
CONFIG_VXFS_FS=y
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ABLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
CONFIG_FORCE_MINIMAL_CONFIG=y

Re: [bug] SLOB crash, 2.6.24-rc2

[Matt Mackall]

On Wed, Nov 14, 2007 at 12:20:01PM +0100, Ingo Molnar wrote:
> 
> there's a new SLOB regression - the attached config crashes with:
> 
> [   61.245190] rc.sysinit used greatest stack depth: 1680 bytes left
> [   61.386859] list_add corruption. prev->next should be next (407d973c), but was 418cf818. (prev=41877098).
> [   61.396328] ------------[ cut here ]------------
> [   61.400910] kernel BUG at lib/list_debug.c:33!
> [   61.405330] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
> 
> looks like memory corruption of some sort and it's reproducible. Picking 
> CONFIG_SLUB makes the crash go away. Booting v2.6.23 with the same 
> .config works fine.

Hmmm, the changes in SLOB since v2.6.23 are all trivial. I'll try to
reproduce it with your config, but it doesn't seem promising.

-- 
Mathematics is the supreme nostalgia of our time.

Re: [bug] SLOB crash, 2.6.24-rc2

[Matt Mackall]

On Wed, Nov 14, 2007 at 11:36:11AM -0600, Matt Mackall wrote:
> On Wed, Nov 14, 2007 at 12:20:01PM +0100, Ingo Molnar wrote:
> > 
> > there's a new SLOB regression - the attached config crashes with:
> > 
> > [   61.245190] rc.sysinit used greatest stack depth: 1680 bytes left
> > [   61.386859] list_add corruption. prev->next should be next (407d973c), but was 418cf818. (prev=41877098).
> > [   61.396328] ------------[ cut here ]------------
> > [   61.400910] kernel BUG at lib/list_debug.c:33!
> > [   61.405330] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
> > 
> > looks like memory corruption of some sort and it's reproducible. Picking 
> > CONFIG_SLUB makes the crash go away. Booting v2.6.23 with the same 
> > .config works fine.
> 
> Hmmm, the changes in SLOB since v2.6.23 are all trivial. I'll try to
> reproduce it with your config, but it doesn't seem promising.

Couldn't reproduce it here, let me know if you get anywhere with your bisect.

-- 
Mathematics is the supreme nostalgia of our time.

Re: [bug] SLOB crash, 2.6.24-rc2

[Ingo Molnar]

* Matt Mackall <mpm@selenic.com> wrote:

> > > [   61.245190] rc.sysinit used greatest stack depth: 1680 bytes left
> > > [   61.386859] list_add corruption. prev->next should be next (407d973c), but was 418cf818. (prev=41877098).
> > > [   61.396328] ------------[ cut here ]------------
> > > [   61.400910] kernel BUG at lib/list_debug.c:33!
> > > [   61.405330] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
> > > 
> > > looks like memory corruption of some sort and it's reproducible. Picking 
> > > CONFIG_SLUB makes the crash go away. Booting v2.6.23 with the same 
> > > .config works fine.
> > 
> > Hmmm, the changes in SLOB since v2.6.23 are all trivial. I'll try to 
> > reproduce it with your config, but it doesn't seem promising.
> 
> Couldn't reproduce it here, let me know if you get anywhere with your 
> bisect.

the bug went away - and the only thing i did was a networking config 
tweak. So maybe something in networking corrupts memory? I'm not sure i 
can restore the old state. (i had lots of problems with net interface 
renaming not working in .24)

	Ingo

Re: [bug] SLOB crash, 2.6.24-rc2

[Matt Mackall]

On Wed, Nov 14, 2007 at 08:05:01PM +0100, Ingo Molnar wrote:
> 
> * Matt Mackall <mpm@selenic.com> wrote:
> 
> > > > [   61.245190] rc.sysinit used greatest stack depth: 1680 bytes left
> > > > [   61.386859] list_add corruption. prev->next should be next (407d973c), but was 418cf818. (prev=41877098).
> > > > [   61.396328] ------------[ cut here ]------------
> > > > [   61.400910] kernel BUG at lib/list_debug.c:33!
> > > > [   61.405330] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC
> > > > 
> > > > looks like memory corruption of some sort and it's reproducible. Picking 
> > > > CONFIG_SLUB makes the crash go away. Booting v2.6.23 with the same 
> > > > .config works fine.
> > > 
> > > Hmmm, the changes in SLOB since v2.6.23 are all trivial. I'll try to 
> > > reproduce it with your config, but it doesn't seem promising.
> > 
> > Couldn't reproduce it here, let me know if you get anywhere with your 
> > bisect.
> 
> the bug went away - and the only thing i did was a networking config 
> tweak. So maybe something in networking corrupts memory? I'm not sure i 
> can restore the old state. (i had lots of problems with net interface 
> renaming not working in .24)

Quite possible. SLOB is more sensitive to off by one bugs because it
doesn't have the power-of-two buckets that SLAB/SLUB have. IIRC,
SLAB/SLUB's debugging features won't detect when you request 28 bytes,
get 32, then overwrite byte 29. But that will damage other objects or
the free list in SLOB.

But this isn't the per-page SLOB list that's getting clobbered, this
is the list of pages held in struct page.

-- 
Mathematics is the supreme nostalgia of our time.

Re: [bug] SLOB crash, 2.6.24-rc2

[David Miller]

From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 14 Nov 2007 20:05:01 +0100

> the bug went away - and the only thing i did was a networking config 
> tweak. So maybe something in networking corrupts memory?

This wouldn't surprise me at all.

I think we can make some headway on this bug, the next time
you trigger it, if the list debugging was a little less terse.

For example, a backtrace and perhaps even feeding the bad list
pointers in question to the SLAB/SLUB debug helpers that can
identify a kmem cache from a given pointer would help.

Thanks.

Re: [bug] SLOB crash, 2.6.24-rc2

[Matt Mackall]

On Wed, Nov 14, 2007 at 02:39:38PM -0800, David Miller wrote:
> From: Ingo Molnar <mingo@elte.hu>
> Date: Wed, 14 Nov 2007 20:05:01 +0100
> 
> > the bug went away - and the only thing i did was a networking config 
> > tweak. So maybe something in networking corrupts memory?
> 
> This wouldn't surprise me at all.
> 
> I think we can make some headway on this bug, the next time
> you trigger it, if the list debugging was a little less terse.
> 
> For example, a backtrace and perhaps even feeding the bad list
> pointers in question to the SLAB/SLUB debug helpers that can
> identify a kmem cache from a given pointer would help.

He hit the bug using SLOB and there are no kmem (or any other) caches
in SLOB.

-- 
Mathematics is the supreme nostalgia of our time.

Re: [bug] SLOB crash, 2.6.24-rc2

[David Miller]

From: Matt Mackall <mpm@selenic.com>
Date: Wed, 14 Nov 2007 16:53:36 -0600

> He hit the bug using SLOB and there are no kmem (or any other) caches
> in SLOB.

That's unfortunate, is there any user tracking facility at
all?

Re: [bug] SLOB crash, 2.6.24-rc2

[Matt Mackall]

On Wed, Nov 14, 2007 at 03:10:13PM -0800, David Miller wrote:
> From: Matt Mackall <mpm@selenic.com>
> Date: Wed, 14 Nov 2007 16:53:36 -0600
> 
> > He hit the bug using SLOB and there are no kmem (or any other) caches
> > in SLOB.
> 
> That's unfortunate, is there any user tracking facility at
> all?

No, the usual strategy for debugging problems -outside- SLOB is to
switch to another allocator with more extensive debugging facilities.

It is of course possible to add redzoning, last user, etc., but there
aren't many advantages to implementing these in SLOB compared to
switching allocators, unless the bug disappears in those other
allocators. In the case of random pointer fandango, such bugs are
likely to disappear when you turn on debugging anyway.

The most likely thing you'll hit in SLOB vs SLUB/SLAB is that SLOB
doesn't hand back power-of-two allocations for kmalloc. Instead, it
has 2-byte granularity on most machines. So small pointer overruns on
kmalloced objects will be somewhat more visible in SLOB than
SLAB/SLUB. I don't think SLAB/SLUB debugging can detect overruns
inside the not-requested-but-still-allocated region of objects.

I've implemented redzoning and various other debugging checks for
earlier versions of SLOB to find problems -in- the allocator, but
those won't apply to current SLOB (which can be considered v2).

-- 
Mathematics is the supreme nostalgia of our time.

Re: [bug] SLOB crash, 2.6.24-rc2

[David Miller]

From: Matt Mackall <mpm@selenic.com>
Date: Wed, 14 Nov 2007 17:37:13 -0600

> No, the usual strategy for debugging problems -outside- SLOB is to
> switch to another allocator with more extensive debugging facilities.

Ok, so the thing we still can do is do a dump_stack() at the
list debugging assertion trigger points.

Re: [bug] SLOB crash, 2.6.24-rc2

[Matt Mackall]

On Wed, Nov 14, 2007 at 03:41:43PM -0800, David Miller wrote:
> From: Matt Mackall <mpm@selenic.com>
> Date: Wed, 14 Nov 2007 17:37:13 -0600
> 
> > No, the usual strategy for debugging problems -outside- SLOB is to
> > switch to another allocator with more extensive debugging facilities.
> 
> Ok, so the thing we still can do is do a dump_stack() at the
> list debugging assertion trigger points.

It's also pretty easy to add some debugging code to make SLOB walk all
its lists at alloc/free time.

-- 
Mathematics is the supreme nostalgia of our time.

Re: [bug] SLOB crash, 2.6.24-rc2

[Ingo Molnar]

* David Miller <davem@davemloft.net> wrote:

> From: Matt Mackall <mpm@selenic.com>
> Date: Wed, 14 Nov 2007 17:37:13 -0600
> 
> > No, the usual strategy for debugging problems -outside- SLOB is to
> > switch to another allocator with more extensive debugging facilities.
> 
> Ok, so the thing we still can do is do a dump_stack() at the list 
> debugging assertion trigger points.

ok, i'll first try to trigger it again.

it's a bzImage kernel with fixed order of eth0 and eth1 detection. What 
i did was to twiddle the /etc/sysconfig/network-scripts/ifcfg-eth* 
configs to address a network-does-not-show-up bug that .24 introduced. 
The crash logs contain this:

 VFS: Mounted root (ext3 filesystem) readonly.
 Freeing unused kernel memory: 396k freed
 Write protecting the kernel read-only data: 2056k
 udev: renamed network interface eth1 to eth0
 udev: renamed network interface eth0_rename to eth1
 eth0: link down
 ADDRCONF(NETDEV_UP): eth0: link is not ready
 EXT3 FS on sda6, internal journal
 kjournald starting.  Commit interval 5 seconds

followed by the crash shortly afterwards (but not immediately). With the 
non-crashing kernel i dont get those "renamed network interface" 
messages.

network interface renaming has been a historic source of pain for me so 
i frequently have to 'twiddle' the networking config to make it work 
again on new kernels. Perhaps because i'm using bzImage kernels. 
User-space is Fedora 8, so fairly recent.

	Ingo

Re: [bug] SLOB crash, 2.6.24-rc2

[David Miller]

From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 15 Nov 2007 11:43:32 +0100

> The crash logs contain this:
> 
>  VFS: Mounted root (ext3 filesystem) readonly.
>  Freeing unused kernel memory: 396k freed
>  Write protecting the kernel read-only data: 2056k
>  udev: renamed network interface eth1 to eth0
>  udev: renamed network interface eth0_rename to eth1
>  eth0: link down
>  ADDRCONF(NETDEV_UP): eth0: link is not ready
>  EXT3 FS on sda6, internal journal
>  kjournald starting.  Commit interval 5 seconds
> 
> followed by the crash shortly afterwards (but not immediately). With the 
> non-crashing kernel i dont get those "renamed network interface" 
> messages.
> 
> network interface renaming has been a historic source of pain for me so 
> i frequently have to 'twiddle' the networking config to make it work 
> again on new kernels. Perhaps because i'm using bzImage kernels. 
> User-space is Fedora 8, so fairly recent.

Yeah I wish udev would just leave the damn devices alone.

It even does things like try to rename a network device to the same
name it already has, and other strange stuff.

But that log difference is a good clue.

Because udev can try to rename a network device stupidly to a name the
device already has we added a patch to just short circuit this case in
the networking.  We did this because otherwise the generic device
layer gives an ugly stack backtrace via dev_rename().

Therefore, you might want to see if reverting that patch (attached
below) has some effect, once you are able to trigger it again.

Thanks Ingo.

commit c8d90dca3211966ba5189e0f3d4bccd558d9ae08
Author: Stephen Hemminger <shemminger@linux-foundation.org>
Date:   Fri Oct 26 03:53:42 2007 -0700

    [NET] dev_change_name: ignore changes to same name
    
    Prevent error/backtrace from dev_rename() when changing
    name of network device to the same name. This is a common
    situation with udev and other scripts that bind addr to device.
    
    Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
    Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/core/dev.c b/net/core/dev.c
index f1647d7..ddfef3b 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -883,6 +883,9 @@ int dev_change_name(struct net_device *dev, char *newname)
 	if (!dev_valid_name(newname))
 		return -EINVAL;
 
+	if (strncmp(newname, dev->name, IFNAMSIZ) == 0)
+		return 0;
+
 	memcpy(oldname, dev->name, IFNAMSIZ);
 
 	if (strchr(newname, '%')) {

Re: [bug] SLOB crash, 2.6.24-rc2

[Nick Piggin]

[-- Attachment #1: Type: text/plain, Size: 846 bytes --]

On Thursday 15 November 2007 21:43, Ingo Molnar wrote:
> * David Miller <davem@davemloft.net> wrote:
> > From: Matt Mackall <mpm@selenic.com>
> > Date: Wed, 14 Nov 2007 17:37:13 -0600
> >
> > > No, the usual strategy for debugging problems -outside- SLOB is to
> > > switch to another allocator with more extensive debugging facilities.
> >
> > Ok, so the thing we still can do is do a dump_stack() at the list
> > debugging assertion trigger points.
>
> ok, i'll first try to trigger it again.

I had implemented SLOB in userspace, so I resynched and think I
found your problem. Sorry for the attachment format -- this mailer
isn't the best. I'm really computer illiterate when it comes to
userspace...

Anyway, I'm really happy to see you're testing and using SLOB
upstream :) Is there any particular reason that you're using it?

Thanks,
Nick

[-- Attachment #2: slob-rotate-fix.patch --]
[-- Type: text/x-diff, Size: 869 bytes --]

Previously, it would be possible for prev->next to point to &free_slob_pages,
and thus we would try to move a list onto itself, and bad things would
happen.

It seems a bit hairy to be doing list operations with the list marker as an
entry, rather than a head, but...

Signed-off-by: Nick Piggin <npiggin@suse.de>
---
Index: linux-2.6/mm/slob.c
===================================================================
--- linux-2.6.orig/mm/slob.c
+++ linux-2.6/mm/slob.c
@@ -321,7 +321,8 @@ static void *slob_alloc(size_t size, gfp
 		/* Improve fragment distribution and reduce our average
 		 * search time by starting our next search here. (see
 		 * Knuth vol 1, sec 2.5, pg 449) */
-		if (free_slob_pages.next != prev->next)
+		if (prev != free_slob_pages.prev &&
+				free_slob_pages.next != prev->next)
 			list_move_tail(&free_slob_pages, prev->next);
 		break;
 	}

Re: [bug] SLOB crash, 2.6.24-rc2

[Ingo Molnar]

* David Miller <davem@davemloft.net> wrote:

> Yeah I wish udev would just leave the damn devices alone.
> 
> It even does things like try to rename a network device to the same 
> name it already has, and other strange stuff.
> 
> But that log difference is a good clue.
> 
> Because udev can try to rename a network device stupidly to a name the 
> device already has we added a patch to just short circuit this case in 
> the networking.  We did this because otherwise the generic device 
> layer gives an ugly stack backtrace via dev_rename().
> 
> Therefore, you might want to see if reverting that patch (attached 
> below) has some effect, once you are able to trigger it again.

just to confuse things, i just got a crash with the twiddled network 
setup :-/ I have reverted the same-name optimization and have got a 
similar crash again. So this angle is a red herring.

now that it's reproducible again i'll try more direct debugging. 
(Networking might not even be the cause of this - that was just a quick 
first impression that i had.)

Btw., the .config is the result of automated "make randconfig" x86 
bootup testing QA, so there might be weird combinations in the .config. 
That's how SLOB got randomly enabled in the first place, i dont normally 
use SLOB kernels.

	Ingo

Re: [bug] SLOB crash, 2.6.24-rc2

[David Miller]

From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 15 Nov 2007 12:03:25 +0100

> now that it's reproducible again i'll try more direct debugging. 
> (Networking might not even be the cause of this - that was just a quick 
> first impression that i had.)
> 
> Btw., the .config is the result of automated "make randconfig" x86 
> bootup testing QA, so there might be weird combinations in the .config. 
> That's how SLOB got randomly enabled in the first place, i dont normally 
> use SLOB kernels.

Check out Nick Piggin's SLOB bug fix, I think it is a good
lead :-)

Re: [bug] SLOB crash, 2.6.24-rc2

[Ingo Molnar]

* Nick Piggin <nickpiggin@yahoo.com.au> wrote:

> On Thursday 15 November 2007 21:43, Ingo Molnar wrote:
> > * David Miller <davem@davemloft.net> wrote:
> > > From: Matt Mackall <mpm@selenic.com>
> > > Date: Wed, 14 Nov 2007 17:37:13 -0600
> > >
> > > > No, the usual strategy for debugging problems -outside- SLOB is to
> > > > switch to another allocator with more extensive debugging facilities.
> > >
> > > Ok, so the thing we still can do is do a dump_stack() at the list
> > > debugging assertion trigger points.
> >
> > ok, i'll first try to trigger it again.
> 
> I had implemented SLOB in userspace, so I resynched and think I found 
> your problem. Sorry for the attachment format -- this mailer isn't the 
> best. I'm really computer illiterate when it comes to userspace...

thx, i'll try your fix in a minute.

> Anyway, I'm really happy to see you're testing and using SLOB upstream
> :) Is there any particular reason that you're using it?

i sometimes test SLOB for -rt, but this time it's the result of my 
"automated random QA" effort, as part of arch/x86 maintainance/QA.

the main trick is to build and booting random "make randconfig" 
bzImages. That finds build bugs and a good deal of boot hang and crash 
bugs as well. (it also found a compiler bug already) I can build and 
boot about 1000 random kernels in 24 hours, and it's all fully 
automated. I usually run it overnight - when a kernel does not come up 
due to a bootup hang or crash (or the kernel log signals any exception 
condition) then the script stops and i can fix it in the morning.

The first step towards this was to get allyesconfig bzImage kernels to 
build and boot fine. That effort took months (we had many problems in 
this area) - i think you saw bugreports and fixes from me about that on 
lkml.

Once that worked reasonably well i made a small Kconfig patch that 
forcibly selects a "minimum set" of drivers and kernel subsystems that 
are needed to boot up a testsystem. Once a "make allnoconfig" and a 
"make allyesconfig" bzImage kernel boots up fine on the testbox all 
randconfig configs "inbetween" are supposed to build and boot fine as 
well.

I also have a patch that adds all the x86 boot options like nosmp, 
maxcpus=1, nohz=off, hpet=disable to be selectable as .config options - 
so those boot options are randomized as well.

I also have a small patch that disables half a dozen drivers/features 
that are not expected to work out of box in a bzImage kernel. (such as 
ISA drivers that assume the presence of hardware, or root filesystem 
features such as NFSROOT)

the resulting make randconfig kernel still has 99% of the degrees of 
freedom that a stock make randconfig kernel has, so by all practical 
purposes it's a fully random kernel - it just happens to boot on my 
testsystem all the time.

A successful bootup means the test system is able to boot up into a 
stock Fedora 8 userspace and is able to bring up its network interfaces 
and ssh out (automatically) to the build box to signal the completion of 
a successful test cycle. The logs are also analyzed for lockdep 
assertions (if lockdep is enabled - which it is in about 20% of the 
randconfig kernels) and other kernel bugs.

(just in case you were wondering about one of the reasons why the 
arch/x86 unification merge went so smoothly, with nary a regression ;-) 
Thomas is doing other types of automated QA of the x86 queue as well.)

this method found the SG-list corruption bugs the following night after 
Linus committed Jen's SG-list changes, so it's pretty good at finding 
regressions as early as possible.

	Ingo

[patch] slob: fix memory corruption

[Ingo Molnar]

* Ingo Molnar <mingo@elte.hu> wrote:

> > I had implemented SLOB in userspace, so I resynched and think I 
> > found your problem. Sorry for the attachment format -- this mailer 
> > isn't the best. I'm really computer illiterate when it comes to 
> > userspace...
> 
> thx, i'll try your fix in a minute.

that did the trick! Nick, find an updated patch below. (reference to the 
bugzilla added.)

	Ingo

-------------------->
Subject: slob: fix memory corruption
From: Nick Piggin <npiggin@suse.de>

Previously, it would be possible for prev->next to point to
&free_slob_pages, and thus we would try to move a list onto itself, and
bad things would happen.

It seems a bit hairy to be doing list operations with the list marker as
an entry, rather than a head, but...

this resolves the following crash:

  http://bugzilla.kernel.org/show_bug.cgi?id=9379

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 mm/slob.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Index: linux/mm/slob.c
===================================================================
--- linux.orig/mm/slob.c
+++ linux/mm/slob.c
@@ -321,7 +321,8 @@ static void *slob_alloc(size_t size, gfp
 		/* Improve fragment distribution and reduce our average
 		 * search time by starting our next search here. (see
 		 * Knuth vol 1, sec 2.5, pg 449) */
-		if (free_slob_pages.next != prev->next)
+		if (prev != free_slob_pages.prev &&
+				free_slob_pages.next != prev->next)
 			list_move_tail(&free_slob_pages, prev->next);
 		break;
 	}

Re: [bug] SLOB crash, 2.6.24-rc2

[Nick Piggin]

On Thursday 15 November 2007 22:28, Ingo Molnar wrote:
> * Nick Piggin <nickpiggin@yahoo.com.au> wrote:

> > Anyway, I'm really happy to see you're testing and using SLOB upstream
> >
> > :) Is there any particular reason that you're using it?
>
> i sometimes test SLOB for -rt, but this time it's the result of my
> "automated random QA" effort, as part of arch/x86 maintainance/QA.
>
> the main trick is to build and booting random "make randconfig"
> bzImages. That finds build bugs and a good deal of boot hang and crash
> bugs as well. (it also found a compiler bug already) I can build and
> boot about 1000 random kernels in 24 hours, and it's all fully
> automated. I usually run it overnight - when a kernel does not come up
> due to a bootup hang or crash (or the kernel log signals any exception
> condition) then the script stops and i can fix it in the morning.
>
> The first step towards this was to get allyesconfig bzImage kernels to
> build and boot fine. That effort took months (we had many problems in
> this area) - i think you saw bugreports and fixes from me about that on
> lkml.
>
> Once that worked reasonably well i made a small Kconfig patch that
> forcibly selects a "minimum set" of drivers and kernel subsystems that
> are needed to boot up a testsystem. Once a "make allnoconfig" and a
> "make allyesconfig" bzImage kernel boots up fine on the testbox all
> randconfig configs "inbetween" are supposed to build and boot fine as
> well.
>
> I also have a patch that adds all the x86 boot options like nosmp,
> maxcpus=1, nohz=off, hpet=disable to be selectable as .config options -
> so those boot options are randomized as well.
>
> I also have a small patch that disables half a dozen drivers/features
> that are not expected to work out of box in a bzImage kernel. (such as
> ISA drivers that assume the presence of hardware, or root filesystem
> features such as NFSROOT)
>
> the resulting make randconfig kernel still has 99% of the degrees of
> freedom that a stock make randconfig kernel has, so by all practical
> purposes it's a fully random kernel - it just happens to boot on my
> testsystem all the time.
>
> A successful bootup means the test system is able to boot up into a
> stock Fedora 8 userspace and is able to bring up its network interfaces
> and ssh out (automatically) to the build box to signal the completion of
> a successful test cycle. The logs are also analyzed for lockdep
> assertions (if lockdep is enabled - which it is in about 20% of the
> randconfig kernels) and other kernel bugs.
>
> (just in case you were wondering about one of the reasons why the
> arch/x86 unification merge went so smoothly, with nary a regression ;-)
> Thomas is doing other types of automated QA of the x86 queue as well.)

Well, my hat's off to you. Actually I was more wondering how it is
that you're catching SLOB bugs ;) so it seems your test setup is much
more useful than just to test the x86 arch code...

Re: [bug] SLOB crash, 2.6.24-rc2

[Dave Haywood]

Ingo Molnar wrote:
> * Nick Piggin <nickpiggin@yahoo.com.au> wrote:
>
>   
>> On Thursday 15 November 2007 21:43, Ingo Molnar wrote:
>>     
>>> * David Miller <davem@davemloft.net> wrote:
>>>       
>>>> From: Matt Mackall <mpm@selenic.com>
>>>> Date: Wed, 14 Nov 2007 17:37:13 -0600
>>>>
>>>>         
>>>>> No, the usual strategy for debugging problems -outside- SLOB is to
>>>>> switch to another allocator with more extensive debugging facilities.
>>>>>           
>>>> Ok, so the thing we still can do is do a dump_stack() at the list
>>>> debugging assertion trigger points.
>>>>         
>>> ok, i'll first try to trigger it again.
>>>       
>> I had implemented SLOB in userspace, so I resynched and think I found 
>> your problem. Sorry for the attachment format -- this mailer isn't the 
>> best. I'm really computer illiterate when it comes to userspace...
>>     
>
> thx, i'll try your fix in a minute.
>
>   
>> Anyway, I'm really happy to see you're testing and using SLOB upstream
>> :) Is there any particular reason that you're using it?
>>     
>
> i sometimes test SLOB for -rt, but this time it's the result of my 
> "automated random QA" effort, as part of arch/x86 maintainance/QA.
>
> the main trick is to build and booting random "make randconfig" 
> bzImages. That finds build bugs and a good deal of boot hang and crash 
> bugs as well. (it also found a compiler bug already) I can build and 
> boot about 1000 random kernels in 24 hours, and it's all fully 
> automated. I usually run it overnight - when a kernel does not come up 
> due to a bootup hang or crash (or the kernel log signals any exception 
> condition) then the script stops and i can fix it in the morning.
>
> The first step towards this was to get allyesconfig bzImage kernels to 
> build and boot fine. That effort took months (we had many problems in 
> this area) - i think you saw bugreports and fixes from me about that on 
> lkml.
>
> Once that worked reasonably well i made a small Kconfig patch that 
> forcibly selects a "minimum set" of drivers and kernel subsystems that 
> are needed to boot up a testsystem. Once a "make allnoconfig" and a 
> "make allyesconfig" bzImage kernel boots up fine on the testbox all 
> randconfig configs "inbetween" are supposed to build and boot fine as 
> well.
>
> I also have a patch that adds all the x86 boot options like nosmp, 
> maxcpus=1, nohz=off, hpet=disable to be selectable as .config options - 
> so those boot options are randomized as well.
>
> I also have a small patch that disables half a dozen drivers/features 
> that are not expected to work out of box in a bzImage kernel. (such as 
> ISA drivers that assume the presence of hardware, or root filesystem 
> features such as NFSROOT)
>
> the resulting make randconfig kernel still has 99% of the degrees of 
> freedom that a stock make randconfig kernel has, so by all practical 
> purposes it's a fully random kernel - it just happens to boot on my 
> testsystem all the time.
>
> A successful bootup means the test system is able to boot up into a 
> stock Fedora 8 userspace and is able to bring up its network interfaces 
> and ssh out (automatically) to the build box to signal the completion of 
> a successful test cycle. The logs are also analyzed for lockdep 
> assertions (if lockdep is enabled - which it is in about 20% of the 
> randconfig kernels) and other kernel bugs.
>
> (just in case you were wondering about one of the reasons why the 
> arch/x86 unification merge went so smoothly, with nary a regression ;-) 
> Thomas is doing other types of automated QA of the x86 queue as well.)
>
> this method found the SG-list corruption bugs the following night after 
> Linus committed Jen's SG-list changes, so it's pretty good at finding 
> regressions as early as possible.
>
> 	Ingo
>   

  How complete is the QA testing?  I was reading this interesting thread
and it occurred to me that this sounds like a useful distributed
computing application.  ie a central server with all valid Kconfig
combinations (how many are there?) for a particular release (-rc or
otherwise) across all architectures.  These are allocated to clients on
request to be built / booted etc.  Any errors are fed back to the
central server.  I guess this would be a useful resource for
developers.  More importantly (and I don't know if this is the case
already!) a new Linux release (2.6.x) could be "certified" with some
level of testing on known hardware / architectures.

  tbh, I feel sorry for Ingo's machine compiling 1000 random kernels in
24h!  I'm surprised it hasn't called the Samaritans...

Dave.

Re: [patch] slob: fix memory corruption

[Ingo Molnar]

> From: Nick Piggin <npiggin@suse.de>

> -		if (free_slob_pages.next != prev->next)
> +		if (prev != free_slob_pages.prev &&
> +				free_slob_pages.next != prev->next)
>  			list_move_tail(&free_slob_pages, prev->next);

btw., exactly how did you find this bug? User-space simulation of SLOB?

	Ingo

Re: [patch] slob: fix memory corruption

[Matt Mackall]

On Thu, Nov 15, 2007 at 12:32:04PM +0100, Ingo Molnar wrote:
> 
> * Ingo Molnar <mingo@elte.hu> wrote:
> 
> > > I had implemented SLOB in userspace, so I resynched and think I 
> > > found your problem. Sorry for the attachment format -- this mailer 
> > > isn't the best. I'm really computer illiterate when it comes to 
> > > userspace...
> > 
> > thx, i'll try your fix in a minute.
> 
> that did the trick! Nick, find an updated patch below. (reference to the 
> bugzilla added.)

Yes, good catch, Nick!
 
> 	Ingo
> 
> -------------------->
> Subject: slob: fix memory corruption
> From: Nick Piggin <npiggin@suse.de>
> 
> Previously, it would be possible for prev->next to point to
> &free_slob_pages, and thus we would try to move a list onto itself, and
> bad things would happen.
> 
> It seems a bit hairy to be doing list operations with the list marker as
> an entry, rather than a head, but...
>
> this resolves the following crash:
> 
>   http://bugzilla.kernel.org/show_bug.cgi?id=9379
> 
> Signed-off-by: Nick Piggin <npiggin@suse.de>
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Matt Mackall <mpm@selenic.com>

Andrew, please cue this for 2.6.24 and -stable.

> ---
>  mm/slob.c |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> Index: linux/mm/slob.c
> ===================================================================
> --- linux.orig/mm/slob.c
> +++ linux/mm/slob.c
> @@ -321,7 +321,8 @@ static void *slob_alloc(size_t size, gfp
>  		/* Improve fragment distribution and reduce our average
>  		 * search time by starting our next search here. (see
>  		 * Knuth vol 1, sec 2.5, pg 449) */
> -		if (free_slob_pages.next != prev->next)
> +		if (prev != free_slob_pages.prev &&
> +				free_slob_pages.next != prev->next)
>  			list_move_tail(&free_slob_pages, prev->next);
>  		break;
>  	}

-- 
Mathematics is the supreme nostalgia of our time.

Re: [patch] slob: fix memory corruption

[Nick Piggin]

On Thursday 15 November 2007 23:48, Ingo Molnar wrote:
> > From: Nick Piggin <npiggin@suse.de>
> >
> > -		if (free_slob_pages.next != prev->next)
> > +		if (prev != free_slob_pages.prev &&
> > +				free_slob_pages.next != prev->next)
> >  			list_move_tail(&free_slob_pages, prev->next);
>
> btw., exactly how did you find this bug? User-space simulation of SLOB?

Yes. It was very useful in developing the improvements to the freelist
handling. The only reason why I don't release/run the code more often
is that my test harness work is pretty ugly (ie. it isn't just a simple
cp mm/slob.c ../blah/).

After that, just a loop of N iterations, within each iteration, there is
a chance of a single allocation of a random size, a single free of a
random outstanding allocation, a run of allocating MAX allocations, or
a run of freeing all previously allocated memory. It's a bit crude, but
it showed up your list head corruption in a second or two.