[PATCH 00/10] percpu: Per cpu code simplification V2

[PATCH 00/10] percpu: Per cpu code simplification V2

[travis]

[resending as my first attempt sent only a partial list.]

This patchset simplifies the code that arches need to maintain to support
per cpu functionality. Most of the code is moved into arch independent
code. Only a minimal set of definitions is kept for each arch.

The patch also unifies the x86 arch so that there is only a single
asm-x86/percpu.h

V1->V2:
- Add support for specifying attributes for per cpu declarations (preserves
  IA64 model(small) attribute).
  - Drop first patch that removes the model(small) attribute for IA64
  - Missing #endif in powerpc generic config /  Wrong Kconfig
  - Follow Randy's suggestions on how to do the Kconfig settings


Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

-- 

[PATCH 01/10] percpu: Use a kconfig variable to signal arch specific percpu setup

[travis]

[-- Attachment #1: arch_sets_up_per_cpu_areas --]
[-- Type: text/plain, Size: 3037 bytes --]

V1->V2:
- Use def_bool as suggested by Randy.

The use of the __GENERIC_PERCPU is a bit problematic since arches
may want to run their own percpu setup while using the generic
percpu definitions. Replace it through a kconfig variable.



Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 arch/ia64/Kconfig            |    3 +++
 arch/powerpc/Kconfig         |    3 +++
 arch/sparc64/Kconfig         |    3 +++
 arch/x86/Kconfig             |    3 +++
 include/asm-generic/percpu.h |    1 -
 include/asm-s390/percpu.h    |    2 --
 include/asm-x86/percpu_32.h  |    2 --
 init/main.c                  |    4 ++--
 8 files changed, 14 insertions(+), 7 deletions(-)

--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -82,6 +82,9 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool y
+
 config DMI
 	bool
 	default y
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,9 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool PPC64
+
 config IRQ_PER_CPU
 	bool
 	default y
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -68,6 +68,9 @@ config AUDIT_ARCH
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool y
+
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -106,6 +106,9 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default X86_64
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool X86_64
+
 config ARCH_SUPPORTS_OPROFILE
 	bool
 	default y
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -3,7 +3,6 @@
 #include <linux/compiler.h>
 #include <linux/threads.h>
 
-#define __GENERIC_PER_CPU
 #ifdef CONFIG_SMP
 
 extern unsigned long __per_cpu_offset[NR_CPUS];
--- a/include/asm-s390/percpu.h
+++ b/include/asm-s390/percpu.h
@@ -4,8 +4,6 @@
 #include <linux/compiler.h>
 #include <asm/lowcore.h>
 
-#define __GENERIC_PER_CPU
-
 /*
  * s390 uses its own implementation for per cpu data, the offset of
  * the cpu local data area is cached in the cpu's lowcore memory.
--- a/include/asm-x86/percpu_32.h
+++ b/include/asm-x86/percpu_32.h
@@ -41,8 +41,6 @@
  *    PER_CPU(cpu_gdt_descr, %ebx)
  */
 #ifdef CONFIG_SMP
-/* Same as generic implementation except for optimized local access. */
-#define __GENERIC_PER_CPU
 
 /* This is used for other cpus to find our section. */
 extern unsigned long __per_cpu_offset[];
--- a/init/main.c
+++ b/init/main.c
@@ -363,7 +363,7 @@ static inline void smp_prepare_cpus(unsi
 
 #else
 
-#ifdef __GENERIC_PER_CPU
+#ifndef CONFIG_ARCH_SETS_UP_PER_CPU_AREA
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
 
 EXPORT_SYMBOL(__per_cpu_offset);
@@ -384,7 +384,7 @@ static void __init setup_per_cpu_areas(v
 		ptr += size;
 	}
 }
-#endif /* !__GENERIC_PER_CPU */
+#endif /* CONFIG_ARCH_SETS_UP_CPU_AREA */
 
 /* Called by boot processor to activate the rest. */
 static void __init smp_init(void)

-- 

[PATCH 02/10] percpu: Move arch XX_PER_CPU_XX definitions into linux/percpu.h

[travis]

[-- Attachment #1: move_percpu_declarations --]
[-- Type: text/plain, Size: 11806 bytes --]

V1->V2:
- Special consideration for IA64: Add the ability to specify
  arch specific per cpu flags

The arch definitions are all the same. So move them into linux/percpu.h.

We cannot move DECLARE_PER_CPU since some include files just include
asm/percpu.h to avoid include recursion problems.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 include/asm-generic/percpu.h |   18 ------------------
 include/asm-ia64/percpu.h    |   24 ++----------------------
 include/asm-powerpc/percpu.h |   17 -----------------
 include/asm-s390/percpu.h    |   18 ------------------
 include/asm-sparc64/percpu.h |   16 ----------------
 include/asm-x86/percpu_32.h  |   12 ------------
 include/asm-x86/percpu_64.h  |   17 -----------------
 include/linux/percpu.h       |   21 +++++++++++++++++++++
 8 files changed, 23 insertions(+), 120 deletions(-)

--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -9,15 +9,6 @@ extern unsigned long __per_cpu_offset[NR
 
 #define per_cpu_offset(x) (__per_cpu_offset[x])
 
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
 /* var is in discarded region: offset to particular copy we want */
 #define per_cpu(var, cpu) (*({				\
 	extern int simple_identifier_##var(void);	\
@@ -27,12 +18,6 @@ extern unsigned long __per_cpu_offset[NR
 
 #else /* ! SMP */
 
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
-
 #define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
 #define __get_cpu_var(var)			per_cpu__##var
 #define __raw_get_cpu_var(var)			per_cpu__##var
@@ -41,7 +26,4 @@ extern unsigned long __per_cpu_offset[NR
 
 #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
 
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 #endif /* _ASM_GENERIC_PERCPU_H_ */
--- a/include/asm-ia64/percpu.h
+++ b/include/asm-ia64/percpu.h
@@ -16,28 +16,11 @@
 #include <linux/threads.h>
 
 #ifdef HAVE_MODEL_SMALL_ATTRIBUTE
-# define __SMALL_ADDR_AREA	__attribute__((__model__ (__small__)))
-#else
-# define __SMALL_ADDR_AREA
+# define PER_CPU_ATTRIBUTES	__attribute__((__model__ (__small__)))
 #endif
 
 #define DECLARE_PER_CPU(type, name)				\
-	extern __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name)				\
-	__attribute__((__section__(".data.percpu")))		\
-	__SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
-
-#ifdef CONFIG_SMP
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
-	__attribute__((__section__(".data.percpu.shared_aligned")))	\
-	__SMALL_ADDR_AREA __typeof__(type) per_cpu__##name		\
-	____cacheline_aligned_in_smp
-#else
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-	DEFINE_PER_CPU(type, name)
-#endif
+	extern PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
 
 #ifdef CONFIG_SMP
 
@@ -63,9 +46,6 @@ extern void *per_cpu_init(void);
 
 #endif	/* SMP */
 
-#define EXPORT_PER_CPU_SYMBOL(var)		EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var)		EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 /*
  * Be extremely careful when taking the address of this variable!  Due to virtual
  * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
--- a/include/asm-powerpc/percpu.h
+++ b/include/asm-powerpc/percpu.h
@@ -16,15 +16,6 @@
 #define __my_cpu_offset() get_paca()->data_offset
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
 /* var is in discarded region: offset to particular copy we want */
 #define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
 #define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()))
@@ -34,11 +25,6 @@ extern void setup_per_cpu_areas(void);
 
 #else /* ! SMP */
 
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
-
 #define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
 #define __get_cpu_var(var)			per_cpu__##var
 #define __raw_get_cpu_var(var)			per_cpu__##var
@@ -47,9 +33,6 @@ extern void setup_per_cpu_areas(void);
 
 #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
 
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 #else
 #include <asm-generic/percpu.h>
 #endif
--- a/include/asm-s390/percpu.h
+++ b/include/asm-s390/percpu.h
@@ -34,16 +34,6 @@
 
 extern unsigned long __per_cpu_offset[NR_CPUS];
 
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) \
-    __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
 #define __get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
 #define __raw_get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
 #define per_cpu(var,cpu) __reloc_hide(var,__per_cpu_offset[cpu])
@@ -51,11 +41,6 @@ extern unsigned long __per_cpu_offset[NR
 
 #else /* ! SMP */
 
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
-
 #define __get_cpu_var(var) __reloc_hide(var,0)
 #define __raw_get_cpu_var(var) __reloc_hide(var,0)
 #define per_cpu(var,cpu) __reloc_hide(var,0)
@@ -64,7 +49,4 @@ extern unsigned long __per_cpu_offset[NR
 
 #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
 
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 #endif /* __ARCH_S390_PERCPU__ */
--- a/include/asm-sparc64/percpu.h
+++ b/include/asm-sparc64/percpu.h
@@ -16,15 +16,6 @@ extern unsigned long __per_cpu_shift;
 	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
 /* var is in discarded region: offset to particular copy we want */
 #define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
 #define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __local_per_cpu_offset))
@@ -33,10 +24,6 @@ extern unsigned long __per_cpu_shift;
 #else /* ! SMP */
 
 #define real_setup_per_cpu_areas()		do { } while (0)
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
 
 #define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
 #define __get_cpu_var(var)			per_cpu__##var
@@ -46,7 +33,4 @@ extern unsigned long __per_cpu_shift;
 
 #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
 
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 #endif /* __ARCH_SPARC64_PERCPU__ */
--- a/include/asm-x86/percpu_32.h
+++ b/include/asm-x86/percpu_32.h
@@ -47,16 +47,7 @@ extern unsigned long __per_cpu_offset[];
 
 #define per_cpu_offset(x) (__per_cpu_offset[x])
 
-/* Separate out the type, so (int[3], foo) works. */
 #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
@@ -72,9 +63,6 @@ DECLARE_PER_CPU(unsigned long, this_cpu_
 
 #define __get_cpu_var(var) __raw_get_cpu_var(var)
 
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 /* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
 #define __percpu_seg "%%fs:"
 #else  /* !SMP */
--- a/include/asm-x86/percpu_64.h
+++ b/include/asm-x86/percpu_64.h
@@ -16,15 +16,6 @@
 
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_internodealigned_in_smp
-
 /* var is in discarded region: offset to particular copy we want */
 #define per_cpu(var, cpu) (*({				\
 	extern int simple_identifier_##var(void);	\
@@ -40,11 +31,6 @@ extern void setup_per_cpu_areas(void);
 
 #else /* ! SMP */
 
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
-
 #define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
 #define __get_cpu_var(var)			per_cpu__##var
 #define __raw_get_cpu_var(var)			per_cpu__##var
@@ -53,7 +39,4 @@ extern void setup_per_cpu_areas(void);
 
 #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
 
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 #endif /* _ASM_X8664_PERCPU_H_ */
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -9,6 +9,27 @@
 
 #include <asm/percpu.h>
 
+#ifndef PER_CPU_ATTRIBUTES
+#define PER_CPU_ATTRIBUTES
+#endif
+
+#define DEFINE_PER_CPU(type, name)					\
+	__attribute__((__section__(".data.percpu")))			\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#ifdef CONFIG_SMP
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	__attribute__((__section__(".data.percpu.shared_aligned")))	\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name		\
+	____cacheline_aligned_in_smp
+#else
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		      \
+	DEFINE_PER_CPU(type, name)
+#endif
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
 /* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
 #ifndef PERCPU_ENOUGH_ROOM
 #ifdef CONFIG_MODULES

-- 

[PATCH 03/10] percpu: Make the asm-generic/percpu.h more "generic"

[travis]

[-- Attachment #1: genericize-percpu.h --]
[-- Type: text/plain, Size: 3984 bytes --]

V1->V2:
- add support for PER_CPU_ATTRIBUTES

Add the ability to use generic/percpu even if the arch needs to override
several aspects of its operations. This will enable the use of generic
percpu.h for all arches.

An arch may define:

__per_cpu_offset	Do not use the generic pointer array. Arch must
			define per_cpu_offset(cpu) (used by x86_64, s390).

__my_cpu_offset		Can be defined to provide an optimized way to determine
			the offset for variables of the currently executing
			processor. Used by ia64, x86_64, x86_32, sparc64, s/390.

SHIFT_PTR(ptr, offset)	If an arch defines it then special handling
			of pointer arithmentic may be implemented. Used
			by s/390.


(Some of these special percpu arch implementations may be later consolidated
so that there are less cases to deal with.)

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 include/asm-generic/percpu.h |   69 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 58 insertions(+), 11 deletions(-)

--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -3,27 +3,74 @@
 #include <linux/compiler.h>
 #include <linux/threads.h>
 
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
 #ifdef CONFIG_SMP
 
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ *
+ * Most arches use the __per_cpu_offset array for those offsets but
+ * some arches have their own ways of determining the offset (x86_64, s390).
+ */
+#ifndef __per_cpu_offset
 extern unsigned long __per_cpu_offset[NR_CPUS];
-
 #define per_cpu_offset(x) (__per_cpu_offset[x])
+#endif
 
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({				\
-	extern int simple_identifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]); }))
-#define __get_cpu_var(var) per_cpu(var, smp_processor_id())
-#define __raw_get_cpu_var(var) per_cpu(var, raw_smp_processor_id())
+/*
+ * Determine the offset for the currently active processor.
+ * An arch may define __my_cpu_offset to provide a more effective
+ * means of obtaining the offset to the per cpu variables of the
+ * current processor.
+ */
+#ifndef __my_cpu_offset
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+/*
+ * Add a offset to a pointer but keep the pointer as is.
+ *
+ * Only S390 provides its own means of moving the pointer.
+ */
+#ifndef SHIFT_PTR
+#define SHIFT_PTR(__p, __offset)	RELOC_HIDE((__p), (__offset))
+#endif
+
+/*
+ * A percpu variable may point to a discarded reghions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) (*SHIFT_PTR(&per_cpu_var(var), per_cpu_offset(cpu)))
+#define __get_cpu_var(var) (*SHIFT_PTR(&per_cpu_var(var), my_cpu_offset))
+#define __raw_get_cpu_var(var) (*SHIFT_PTR(&per_cpu_var(var), __my_cpu_offset))
+
+#ifdef CONFIG_ARCH_SETS_UP_PER_CPU_AREA
+extern void setup_per_cpu_areas(void);
+#endif
 
 #else /* ! SMP */
 
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
+#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu_var(var)))
+#define __get_cpu_var(var)			per_cpu_var(var)
+#define __raw_get_cpu_var(var)			per_cpu_var(var)
 
 #endif	/* SMP */
 
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+#ifndef PER_CPU_ATTRIBUTES
+#define PER_CPU_ATTRIBUTES
+#endif
+
+#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
+					__typeof__(type) per_cpu_var(name)
 
 #endif /* _ASM_GENERIC_PERCPU_H_ */

-- 

[PATCH 04/10] x86_32: Use generic percpu.h

[travis]

[-- Attachment #1: x86_32_use_generic_percpu --]
[-- Type: text/plain, Size: 1847 bytes --]

x86_32 only provides a special way to obtain the local per cpu area offset
via x86_read_percpu. Otherwise it can fully use the generic handling.

Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: ak@suse.de
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 include/asm-x86/percpu_32.h |   30 +++++++++---------------------
 1 file changed, 9 insertions(+), 21 deletions(-)

--- a/include/asm-x86/percpu_32.h
+++ b/include/asm-x86/percpu_32.h
@@ -42,34 +42,22 @@
  */
 #ifdef CONFIG_SMP
 
-/* This is used for other cpus to find our section. */
-extern unsigned long __per_cpu_offset[];
-
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({				\
-	extern int simple_indentifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]); }))
-
-#define __raw_get_cpu_var(var) (*({					\
-	extern int simple_indentifier_##var(void);			\
-	RELOC_HIDE(&per_cpu__##var, x86_read_percpu(this_cpu_off));	\
-}))
-
-#define __get_cpu_var(var) __raw_get_cpu_var(var)
+#define __my_cpu_offset x86_read_percpu(this_cpu_off)
 
 /* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
 #define __percpu_seg "%%fs:"
+
 #else  /* !SMP */
-#include <asm-generic/percpu.h>
+
 #define __percpu_seg ""
+
 #endif	/* SMP */
 
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
 /* For arch-specific code, we can use direct single-insn ops (they
  * don't give an lvalue though). */
 extern void __bad_percpu_size(void);

-- 

[PATCH 05/10] x86_64: Use generic percpu

[travis]

[-- Attachment #1: x86_64_use_generic_percpu --]
[-- Type: text/plain, Size: 1726 bytes --]

x86_64 provides an optimized way to determine the local per cpu area
offset through the pda and determines the base by accessing a remote
pda.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>


---
 include/asm-x86/percpu_64.h |   28 +++-------------------------
 1 file changed, 3 insertions(+), 25 deletions(-)

--- a/include/asm-x86/percpu_64.h
+++ b/include/asm-x86/percpu_64.h
@@ -8,35 +8,13 @@
    from %gs */
 
 #ifdef CONFIG_SMP
-
 #include <asm/pda.h>
 
 #define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset() read_pda(data_offset)
+#define __my_cpu_offset read_pda(data_offset)
 
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({				\
-	extern int simple_identifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)); }))
-#define __get_cpu_var(var) (*({				\
-	extern int simple_identifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()); }))
-#define __raw_get_cpu_var(var) (*({			\
-	extern int simple_identifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()); }))
-
-extern void setup_per_cpu_areas(void);
-
-#else /* ! SMP */
-
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
-
-#endif	/* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
+#endif
+#include <asm-generic/percpu.h>
 #endif /* _ASM_X8664_PERCPU_H_ */

-- 

[PATCH 06/10] s390: Use generic percpu

[travis]

[-- Attachment #1: s390_generic_percpu --]
[-- Type: text/plain, Size: 2517 bytes --]

On Thu, 29 Nov 2007, Martin Schwidefsky wrote:

> On Wed, 2007-11-28 at 13:09 -0800, Christoph Lameter wrote:
> > s390 has a special way to determine the pointer to a per cpu area
> > plus there is a way to access the base of the per cpu area of the
> > currently executing processor.
> > 
> > Note: I had to do a minor change to ASM code. Please check that
> > this was done right.
> 
> Hi Christoph,
> 
> after fixing the trainwreck with Gregs kset changes I've got rc3-mm2
> compiled with your percpu patches. The new s390 percpu code works fine:
> 
> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Cc: schwidefsky@de.ibm.com
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 include/asm-s390/percpu.h |   33 +++++++++------------------------
 1 file changed, 9 insertions(+), 24 deletions(-)

--- a/include/asm-s390/percpu.h
+++ b/include/asm-s390/percpu.h
@@ -13,40 +13,25 @@
  */
 #if defined(__s390x__) && defined(MODULE)
 
-#define __reloc_hide(var,offset) (*({			\
+#define SHIFT_PTR(ptr,offset) (({			\
 	extern int simple_identifier_##var(void);	\
 	unsigned long *__ptr;				\
-	asm ( "larl %0,per_cpu__"#var"@GOTENT"		\
-	    : "=a" (__ptr) : "X" (per_cpu__##var) );	\
-	(typeof(&per_cpu__##var))((*__ptr) + (offset));	}))
+	asm ( "larl %0, %1@GOTENT"		\
+	    : "=a" (__ptr) : "X" (ptr) );		\
+	(typeof(ptr))((*__ptr) + (offset));	}))
 
 #else
 
-#define __reloc_hide(var, offset) (*({				\
+#define SHIFT_PTR(ptr, offset) (({				\
 	extern int simple_identifier_##var(void);		\
 	unsigned long __ptr;					\
-	asm ( "" : "=a" (__ptr) : "0" (&per_cpu__##var) );	\
-	(typeof(&per_cpu__##var)) (__ptr + (offset)); }))
+	asm ( "" : "=a" (__ptr) : "0" (ptr) );			\
+	(typeof(ptr)) (__ptr + (offset)); }))
 
 #endif
 
-#ifdef CONFIG_SMP
+#define __my_cpu_offset S390_lowcore.percpu_offset
 
-extern unsigned long __per_cpu_offset[NR_CPUS];
-
-#define __get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
-#define __raw_get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
-#define per_cpu(var,cpu) __reloc_hide(var,__per_cpu_offset[cpu])
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-#else /* ! SMP */
-
-#define __get_cpu_var(var) __reloc_hide(var,0)
-#define __raw_get_cpu_var(var) __reloc_hide(var,0)
-#define per_cpu(var,cpu) __reloc_hide(var,0)
-
-#endif /* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+#include <asm-generic/percpu.h>
 
 #endif /* __ARCH_S390_PERCPU__ */

-- 

[PATCH 07/10] Powerpc: Use generic per cpu

[travis]

[-- Attachment #1: power_generic_percpu --]
[-- Type: text/plain, Size: 1484 bytes --]

V1->V2:
- add missing #endif

Powerpc has a way to determine the address of the per cpu area of the
currently executing processor via the paca and the array of per cpu
offsets is avoided by looking up the per cpu area from the remote
paca's (copying x86_64).

Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 include/asm-powerpc/percpu.h |   21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)

--- a/include/asm-powerpc/percpu.h
+++ b/include/asm-powerpc/percpu.h
@@ -16,25 +16,8 @@
 #define __my_cpu_offset() get_paca()->data_offset
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, local_paca->data_offset))
-
-extern void setup_per_cpu_areas(void);
-
-#else /* ! SMP */
-
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
-
-#endif	/* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
-#else
+#endif /* CONFIG_SMP */
+#endif /* __powerpc64__ */
 #include <asm-generic/percpu.h>
-#endif
 
 #endif /* _ASM_POWERPC_PERCPU_H_ */

-- 

[PATCH 08/10] Sparc64: Use generic percpu

[travis]

[-- Attachment #1: sparc64_generic_percpu --]
[-- Type: text/plain, Size: 2129 bytes --]

Sparc64 has a way of providing the base address for the per cpu area of the
currently executing processor in a global register.

Sparc64 also provides a way to calculate the address of a per cpu area
from a base address instead of performing an array lookup.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 arch/sparc64/mm/init.c       |    5 +++++
 include/asm-sparc64/percpu.h |   12 ++----------
 2 files changed, 7 insertions(+), 10 deletions(-)

--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -1328,6 +1328,11 @@ pgd_t swapper_pg_dir[2048];
 static void sun4u_pgprot_init(void);
 static void sun4v_pgprot_init(void);
 
+/* Dummy function */
+void __init setup_per_cpu_areas(void)
+{
+}
+
 void __init paging_init(void)
 {
 	unsigned long end_pfn, pages_avail, shift, phys_base;
--- a/include/asm-sparc64/percpu.h
+++ b/include/asm-sparc64/percpu.h
@@ -7,7 +7,6 @@ register unsigned long __local_per_cpu_o
 
 #ifdef CONFIG_SMP
 
-#define setup_per_cpu_areas()			do { } while (0)
 extern void real_setup_per_cpu_areas(void);
 
 extern unsigned long __per_cpu_base;
@@ -16,21 +15,14 @@ extern unsigned long __per_cpu_shift;
 	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __local_per_cpu_offset))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __local_per_cpu_offset))
+#define __my_cpu_offset __local_per_cpu_offset
 
 #else /* ! SMP */
 
 #define real_setup_per_cpu_areas()		do { } while (0)
 
-#define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
-
 #endif	/* SMP */
 
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+#include <asm-generic/percpu.h>
 
 #endif /* __ARCH_SPARC64_PERCPU__ */

-- 

[PATCH 09/10] ia64: Use generic percpu

[travis]

[-- Attachment #1: ia64_generic_percpu --]
[-- Type: text/plain, Size: 2701 bytes --]

V1->V2:
- Merge fixes
- Remove transitional check for PER_CPU_ATTRIBUTES from linux/percpu.h

ia64 has a special processor specific mapping that can be used to locate the
offset for the current per cpu area.

Cc: linux-ia64@vger.kernel.org
Cc: tony.luck@intel.com
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 include/asm-ia64/percpu.h |   25 +++++++------------------
 include/linux/percpu.h    |    4 ----
 2 files changed, 7 insertions(+), 22 deletions(-)

--- a/include/asm-ia64/percpu.h
+++ b/include/asm-ia64/percpu.h
@@ -12,36 +12,20 @@
 # define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
 #else /* !__ASSEMBLY__ */
 
-
 #include <linux/threads.h>
 
 #ifdef HAVE_MODEL_SMALL_ATTRIBUTE
 # define PER_CPU_ATTRIBUTES	__attribute__((__model__ (__small__)))
 #endif
 
-#define DECLARE_PER_CPU(type, name)				\
-	extern PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
 #ifdef CONFIG_SMP
 
-extern unsigned long __per_cpu_offset[NR_CPUS];
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
-DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
-
-#define per_cpu(var, cpu)  (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
+#define __my_cpu_offset	__ia64_per_cpu_var(local_per_cpu_offset)
 
-extern void setup_per_cpu_areas (void);
 extern void *per_cpu_init(void);
 
 #else /* ! SMP */
 
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
 #define per_cpu_init()				(__phys_per_cpu_start)
 
 #endif	/* SMP */
@@ -52,7 +36,12 @@ extern void *per_cpu_init(void);
  * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
  * more efficient.
  */
-#define __ia64_per_cpu_var(var)	(per_cpu__##var)
+#define __ia64_per_cpu_var(var)	per_cpu__##var
+
+#include <asm-generic/percpu.h>
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
 
 #endif /* !__ASSEMBLY__ */
 
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -9,10 +9,6 @@
 
 #include <asm/percpu.h>
 
-#ifndef PER_CPU_ATTRIBUTES
-#define PER_CPU_ATTRIBUTES
-#endif
-
 #define DEFINE_PER_CPU(type, name)					\
 	__attribute__((__section__(".data.percpu")))			\
 	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name

-- 

[PATCH 10/10] x86: Unify percpu.h

[travis]

[-- Attachment #1: unification --]
[-- Type: text/plain, Size: 8216 bytes --]

Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now pretty
small so this is simply adding them together.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

---
 include/asm-x86/percpu.h    |  145 ++++++++++++++++++++++++++++++++++++++++++--
 include/asm-x86/percpu_32.h |  119 ------------------------------------
 include/asm-x86/percpu_64.h |   20 ------
 3 files changed, 141 insertions(+), 143 deletions(-)

--- a/include/asm-x86/percpu.h
+++ b/include/asm-x86/percpu.h
@@ -1,5 +1,142 @@
-#ifdef CONFIG_X86_32
-# include "percpu_32.h"
-#else
-# include "percpu_64.h"
+#ifndef _ASM_X86_PERCPU_H_
+#define _ASM_X86_PERCPU_H_
+
+#ifdef CONFIG_X86_64
+#include <linux/compiler.h>
+
+/* Same as asm-generic/percpu.h, except that we store the per cpu offset
+   in the PDA. Longer term the PDA and every per cpu variable
+   should be just put into a single section and referenced directly
+   from %gs */
+
+#ifdef CONFIG_SMP
+#include <asm/pda.h>
+
+#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
+#define __my_cpu_offset read_pda(data_offset)
+
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
 #endif
+#include <asm-generic/percpu.h>
+
+DECLARE_PER_CPU(struct x8664_pda, pda);
+
+#else /* CONFIG_X86_64 */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ *    var - variable name
+ *    reg - 32bit register
+ *
+ * The resulting address is stored in the "reg" argument.
+ *
+ * Example:
+ *    PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+#define PER_CPU(var, reg)				\
+	movl %fs:per_cpu__##this_cpu_off, reg;		\
+	lea per_cpu__##var(reg), reg
+#define PER_CPU_VAR(var)	%fs:per_cpu__##var
+#else /* ! SMP */
+#define PER_CPU(var, reg)			\
+	movl $per_cpu__##var, reg
+#define PER_CPU_VAR(var)	per_cpu__##var
+#endif	/* SMP */
+
+#else /* ...!ASSEMBLY */
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ *    var - variable name
+ *    cpu - 32bit register containing the current CPU number
+ *
+ * The resulting address is stored in the "cpu" argument.
+ *
+ * Example:
+ *    PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+
+#define __my_cpu_offset x86_read_percpu(this_cpu_off)
+
+/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
+#define __percpu_seg "%%fs:"
+
+#else  /* !SMP */
+
+#define __percpu_seg ""
+
+#endif	/* SMP */
+
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
+/* For arch-specific code, we can use direct single-insn ops (they
+ * don't give an lvalue though). */
+extern void __bad_percpu_size(void);
+
+#define percpu_to_op(op,var,val)				\
+	do {							\
+		typedef typeof(var) T__;			\
+		if (0) { T__ tmp__; tmp__ = (val); }		\
+		switch (sizeof(var)) {				\
+		case 1:						\
+			asm(op "b %1,"__percpu_seg"%0"		\
+			    : "+m" (var)			\
+			    :"ri" ((T__)val));			\
+			break;					\
+		case 2:						\
+			asm(op "w %1,"__percpu_seg"%0"		\
+			    : "+m" (var)			\
+			    :"ri" ((T__)val));			\
+			break;					\
+		case 4:						\
+			asm(op "l %1,"__percpu_seg"%0"		\
+			    : "+m" (var)			\
+			    :"ri" ((T__)val));			\
+			break;					\
+		default: __bad_percpu_size();			\
+		}						\
+	} while (0)
+
+#define percpu_from_op(op,var)					\
+	({							\
+		typeof(var) ret__;				\
+		switch (sizeof(var)) {				\
+		case 1:						\
+			asm(op "b "__percpu_seg"%1,%0"		\
+			    : "=r" (ret__)			\
+			    : "m" (var));			\
+			break;					\
+		case 2:						\
+			asm(op "w "__percpu_seg"%1,%0"		\
+			    : "=r" (ret__)			\
+			    : "m" (var));			\
+			break;					\
+		case 4:						\
+			asm(op "l "__percpu_seg"%1,%0"		\
+			    : "=r" (ret__)			\
+			    : "m" (var));			\
+			break;					\
+		default: __bad_percpu_size();			\
+		}						\
+		ret__; })
+
+#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
+#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_X86_64 */
+#endif /* _ASM_X86_PERCPU_H_ */
--- a/include/asm-x86/percpu_32.h
+++ /dev/null
@@ -1,119 +0,0 @@
-#ifndef __ARCH_I386_PERCPU__
-#define __ARCH_I386_PERCPU__
-
-#ifdef __ASSEMBLY__
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- *    var - variable name
- *    reg - 32bit register
- *
- * The resulting address is stored in the "reg" argument.
- *
- * Example:
- *    PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-#define PER_CPU(var, reg)				\
-	movl %fs:per_cpu__##this_cpu_off, reg;		\
-	lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var)	%fs:per_cpu__##var
-#else /* ! SMP */
-#define PER_CPU(var, reg)			\
-	movl $per_cpu__##var, reg
-#define PER_CPU_VAR(var)	per_cpu__##var
-#endif	/* SMP */
-
-#else /* ...!ASSEMBLY */
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- *    var - variable name
- *    cpu - 32bit register containing the current CPU number
- *
- * The resulting address is stored in the "cpu" argument.
- *
- * Example:
- *    PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-
-#define __my_cpu_offset x86_read_percpu(this_cpu_off)
-
-/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
-#define __percpu_seg "%%fs:"
-
-#else  /* !SMP */
-
-#define __percpu_seg ""
-
-#endif	/* SMP */
-
-#include <asm-generic/percpu.h>
-
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
-/* For arch-specific code, we can use direct single-insn ops (they
- * don't give an lvalue though). */
-extern void __bad_percpu_size(void);
-
-#define percpu_to_op(op,var,val)				\
-	do {							\
-		typedef typeof(var) T__;			\
-		if (0) { T__ tmp__; tmp__ = (val); }		\
-		switch (sizeof(var)) {				\
-		case 1:						\
-			asm(op "b %1,"__percpu_seg"%0"		\
-			    : "+m" (var)			\
-			    :"ri" ((T__)val));			\
-			break;					\
-		case 2:						\
-			asm(op "w %1,"__percpu_seg"%0"		\
-			    : "+m" (var)			\
-			    :"ri" ((T__)val));			\
-			break;					\
-		case 4:						\
-			asm(op "l %1,"__percpu_seg"%0"		\
-			    : "+m" (var)			\
-			    :"ri" ((T__)val));			\
-			break;					\
-		default: __bad_percpu_size();			\
-		}						\
-	} while (0)
-
-#define percpu_from_op(op,var)					\
-	({							\
-		typeof(var) ret__;				\
-		switch (sizeof(var)) {				\
-		case 1:						\
-			asm(op "b "__percpu_seg"%1,%0"		\
-			    : "=r" (ret__)			\
-			    : "m" (var));			\
-			break;					\
-		case 2:						\
-			asm(op "w "__percpu_seg"%1,%0"		\
-			    : "=r" (ret__)			\
-			    : "m" (var));			\
-			break;					\
-		case 4:						\
-			asm(op "l "__percpu_seg"%1,%0"		\
-			    : "=r" (ret__)			\
-			    : "m" (var));			\
-			break;					\
-		default: __bad_percpu_size();			\
-		}						\
-		ret__; })
-
-#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ARCH_I386_PERCPU__ */
--- a/include/asm-x86/percpu_64.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_X8664_PERCPU_H_
-#define _ASM_X8664_PERCPU_H_
-#include <linux/compiler.h>
-
-/* Same as asm-generic/percpu.h, except that we store the per cpu offset
-   in the PDA. Longer term the PDA and every per cpu variable
-   should be just put into a single section and referenced directly
-   from %gs */
-
-#ifdef CONFIG_SMP
-#include <asm/pda.h>
-
-#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset read_pda(data_offset)
-
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-#endif
-#include <asm-generic/percpu.h>
-#endif /* _ASM_X8664_PERCPU_H_ */

-- 

Re: [PATCH 08/10] Sparc64: Use generic percpu

[David Miller]

From: travis@sgi.com
Date: Thu, 27 Dec 2007 16:16:25 -0800

> Sparc64 has a way of providing the base address for the per cpu area of the
> currently executing processor in a global register.
> 
> Sparc64 also provides a way to calculate the address of a per cpu area
> from a base address instead of performing an array lookup.
> 
> Cc: David Miller <davem@davemloft.net>
> Signed-off-by: Christoph Lameter <clameter@sgi.com>
> Signed-off-by: Mike Travis <travis@sgi.com>

Acked-by: David S. Miller <davem@davemloft.net>

[PATCH 00/10] percpu: Per cpu code simplification V2

[travis]

This patchset simplifies the code that arches need to maintain to support
per cpu functionality. Most of the code is moved into arch independent
code. Only a minimal set of definitions is kept for each arch.

The patch also unifies the x86 arch so that there is only a single
asm-x86/percpu.h

V1->V2:
- Add support for specifying attributes for per cpu declarations (preserves
  IA64 model(small) attribute).
  - Drop first patch that removes the model(small) attribute for IA64
  - Missing #endif in powerpc generic config /  Wrong Kconfig
  - Follow Randy's suggestions on how to do the Kconfig settings


Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>

--