* BUG: unable to handle kernel paging request
@ 2008-05-05 22:33 thomas
2008-05-07 6:55 ` Andrew Morton
0 siblings, 1 reply; 17+ messages in thread
From: thomas @ 2008-05-05 22:33 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2956 bytes --]
See also attached config and dmesg:
[ 706.684483] BUG: unable to handle kernel paging request at fa4213d8
[ 706.684488] IP: [<f8b9e4f3>] :oprofile:alloc_cpu_buffers+0x39/0xce
[ 706.684496] *pde = 00000000
[ 706.684500] Oops: 0002 [#1] SMP
[ 706.684502] last sysfs file: /sys/devices/pci0000:00/0000:00:09.0/irq
[ 706.684505] Modules linked in: oprofile cpufreq_stats rfcomm l2cap bluetooth
autofs4 fuse sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state
nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT
ip6table_filter ip6_tables x_tables cpufreq_ondemand dm_crypt ext2 dm_mirror
dm_log dm_multipath scsi_dh dm_mod ipv6 snd_hda_intel snd_seq_dummy snd_seq_oss
snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss forcedeth
snd_pcm snd_timer snd_page_alloc snd_hwdep pcspkr k8temp snd soundcore button
i2c_nforce2 i2c_core mtd chipreg map_funcs serio_raw hwmon sg pata_amd
pata_acpi ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd
ehci_hcd [last unloaded: scsi_wait_scan]
[ 706.684537]
[ 706.684539] Pid: 7857, comm: oprofiled Not tainted (2.6.26-rc1-next-20080505
#21)
[ 706.684542] EIP: 0060:[<f8b9e4f3>] EFLAGS: 00210286 CPU: 0
[ 706.684547] EIP is at alloc_cpu_buffers+0x39/0xce [oprofile]
[ 706.684550] EAX: f8ba6000 EBX: fa4213c0 ECX: f8b9e4f1 EDX: 00000000
[ 706.684552] ESI: 00000000 EDI: 00002000 EBP: 00010000 ESP: f45cfe98
[ 706.684554] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 706.684556] Process oprofiled (pid: 7857, ti=f45cf000 task=f6314f00
task.ti=f45cf000)
[ 706.684558] Stack: ffffffea f6228180 00000000 f8b9ec99 f8b9e119 ffffffea
f6228180 f8b9ecd2
[ 706.684563] f6228180 f3363988 c047f42d f453cd80 f29cf3b8 f45cff14
f6228180 f45cff14
[ 706.684568] 00000001 c047f543 f6228180 00000000 00000000 f45cff14
c0489f07 00000000
[ 706.684572] Call Trace:
[ 706.684575] [<f8b9ec99>] event_buffer_open+0x0/0x55 [oprofile]
[ 706.684582] [<f8b9e119>] oprofile_setup+0x11/0x84 [oprofile]
[ 706.684588] [<f8b9ecd2>] event_buffer_open+0x39/0x55 [oprofile]
[ 706.684595] [<c047f42d>] __dentry_open+0x118/0x212
[ 706.684602] [<c047f543>] nameidata_to_filp+0x1c/0x2c
[ 706.684607] [<c0489f07>] do_filp_open+0x35a/0x6c3
[ 706.684612] [<c041bcf8>] kunmap_atomic+0x67/0x87
[ 706.684617] [<c046e520>] handle_mm_fault+0x6e7/0x6f8
[ 706.684621] [<c0470e14>] mmap_region+0x2de/0x394
[ 706.684633] [<c047f23f>] do_sys_open+0x40/0xb0
[ 706.684638] [<c047f2f3>] sys_open+0x1e/0x23
[ 706.684643] [<c0404a92>] syscall_call+0x7/0xb
[ 706.684653] =======================
[ 706.684654] Code: 8d 2c fd 00 00 00 00 53 e8 f8 28 95 c7 89 c6 e9 8d 00 00
00
bb c0 43 ba f8 31 d2 89 e8 03 1c b5 c0 5e 74 c0 e8 d2 56 8d c7 85 c0 <89> 43 18
74 7e 8d 43 34 c7 43 04 00 00 00 00 89 73 2c c7 43 0c
[ 706.684677] EIP: [<f8b9e4f3>] alloc_cpu_buffers+0x39/0xce [oprofile] SS:ESP
0068:f45cfe98
[ 706.684684] ---[ end trace 4f359ae625277917 ]---
[-- Attachment #2: config-2.6.26-rc1-next-20080505 --]
[-- Type: application/octet-stream, Size: 83285 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc1
# Mon May 5 23:37:16 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_IMMEDIATE=y
CONFIG_IMMEDIATE=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
CONFIG_X86_GENERICARCH=y
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_VMI=y
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_SYSFS_POWER is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_LTPC is not set
# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ACER_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_TC1100_WMI is not set
CONFIG_MSI_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ME4000 is not set
# CONFIG_AECTC is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
# CONFIG_SATA_NV is not set
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_QDI=m
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
# CONFIG_REALTEK_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=m
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
CONFIG_ULTRA=m
# CONFIG_SMC9194 is not set
# CONFIG_NET_VENDOR_RACAL is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
CONFIG_EWRK3=m
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=m
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_E1000E_ENABLED=y
# CONFIG_ET131X is not set
CONFIG_IP1000=m
# CONFIG_IGB is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
# CONFIG_SLICOSS is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
# CONFIG_BNX2X is not set
# CONFIG_SFC is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
# CONFIG_SMCTR is not set
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_DEBUG=y
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
CONFIG_ATH5K_DEBUG=y
CONFIG_IWLWIFI=y
CONFIG_IWLCORE=m
CONFIG_IWLWIFI_LEDS=y
# CONFIG_IWLWIFI_RFKILL is not set
CONFIG_IWL4965=m
CONFIG_IWL4965_HT=y
CONFIG_IWL4965_LEDS=y
CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y
CONFIG_IWL4965_SENSITIVITY=y
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWL3945=m
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_IWL3945_LEDS=y
CONFIG_IWL3945_DEBUG=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2400PCI=m
CONFIG_RT2400PCI_RFKILL=y
CONFIG_RT2400PCI_LEDS=y
CONFIG_RT2500PCI=m
CONFIG_RT2500PCI_RFKILL=y
CONFIG_RT2500PCI_LEDS=y
CONFIG_RT61PCI=m
CONFIG_RT61PCI_RFKILL=y
CONFIG_RT61PCI_LEDS=y
CONFIG_RT2500USB=m
# CONFIG_RT2500USB_LEDS is not set
CONFIG_RT73USB=m
# CONFIG_RT73USB_LEDS is not set
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_HSO is not set
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
# CONFIG_HISAX_ASUSCOM is not set
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
# CONFIG_HISAX_SPORTSTER is not set
# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
# CONFIG_HISAX_ISURF is not set
# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
# CONFIG_ISDN_DRV_ICN is not set
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_APPLEIR is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
#
# Encoders/decoders and other helper chips
#
#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_CS5345 is not set
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# Video decoders
#
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_TCM825X=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
# CONFIG_VIDEO_GO7007 is not set
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_ALSA is not set
CONFIG_VIDEO_USBVISION=m
CONFIG_USB_ET61X251=m
CONFIG_USB_SN9C102=m
CONFIG_USB_ZC0301=m
CONFIG_USB_ZR364XX=m
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
# CONFIG_USB_SI470X is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_IMAC=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PROGEAR=m
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_DETECT=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
#
# ISA devices
#
CONFIG_SND_ADLIB=m
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
CONFIG_SND_CS4236=m
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
CONFIG_SND_ES18XX=m
CONFIG_SND_SC6000=m
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
CONFIG_SND_OPL3SA2=m
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
CONFIG_SND_MIRO=m
# CONFIG_SND_SB8 is not set
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
# CONFIG_SND_SB16_CSP is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_PANTHERLORD_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_WUSB is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USB_S2255 is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_TI_FIRMWARE is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_CLEVO_MAIL is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_SMX is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m
# CONFIG_NOVFS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FTRACE=y
CONFIG_TRACING=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KERNEL_TESTS is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_MMIOTRACE_HOOKS=y
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_LGUEST=m
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
[-- Attachment #3: d1.txt --]
[-- Type: text/plain, Size: 47429 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.26-rc1-next-20080505 (thomas@dhcppc1) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #21 SMP Mon May 5 23:55:18 CEST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] After WB checking
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 0000000000080000
[ 0.000000] After UC checking
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 0000000000080000
[ 0.000000] After sorting
[ 0.000000] MTRR MAP PFN: 0000000000000000 - 0000000000080000
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524240) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524240
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524240
[ 0.000000] On node 0 totalpages: 524240
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292561 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: RSDP 000F92B0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFD0000, 003C (r1 MSIISM OEMRSDT 10000704 MSFT 97)
[ 0.000000] ACPI: FACP 7FFD0200, 0084 (r2 MSIISM OEMFACP 10000704 MSFT 97)
[ 0.000000] ACPI: DSDT 7FFD0440, 5045 (r1 1ADGH 1ADGH013 13 INTL 20051117)
[ 0.000000] ACPI: FACS 7FFDE000, 0040
[ 0.000000] ACPI: APIC 7FFD0390, 0070 (r1 MSIISM OEMAPIC 10000704 MSFT 97)
[ 0.000000] ACPI: MCFG 7FFD0400, 003C (r1 MSIISM OEMMCFG 10000704 MSFT 97)
[ 0.000000] ACPI: OEMB 7FFDE040, 0061 (r1 MSIISM AMI_OEM 10000704 MSFT 97)
[ 0.000000] ACPI: HPET 7FFD5490, 0038 (r1 MSIISM OEMHPET0 10000704 MSFT 97)
[ 0.000000] ACPI: SSDT 7FFD54D0, 028A (r1 A M I POWERNOW 1 AMD 1)
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:50000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 32552 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
[ 0.693310] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520145
[ 0.693310] Kernel command line: ro root=LABEL=ROOT rhgb
[ 0.693310] mapped APIC to ffffb000 (fee00000)
[ 0.693310] mapped IOAPIC to ffffa000 (fec00000)
[ 0.693310] Enabling fast FPU save and restore... done.
[ 0.693310] Enabling unmasked SIMD FPU exception support... done.
[ 0.693310] Initializing CPU#0
[ 0.693310] CPU 0 irqstacks, hard=c07b7000 soft=c0797000
[ 0.693310] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.693310] Detected 2600.032 MHz processor.
[ 0.693310] spurious 8259A interrupt: IRQ7.
[ 0.693310] Console: colour VGA+ 80x25
[ 0.693310] console [tty0] enabled
[ 0.693310] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.693310] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.693310] Memory: 2070832k/2096960k available (2200k kernel code, 24872k reserved, 1161k data, 280k init, 1179456k highmem)
[ 0.693310] virtual kernel memory layout:
[ 0.693310] fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
[ 0.693310] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.693310] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.693310] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.693310] .init : 0xc074e000 - 0xc0794000 ( 280 kB)
[ 0.693310] .data : 0xc0626001 - 0xc07486e0 (1161 kB)
[ 0.693310] .text : 0xc0400000 - 0xc0626001 (2200 kB)
[ 0.693310] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.693310] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.693310] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.693310] hpet clockevent registered
[ 0.752496] Calibrating delay using timer specific routine.. 5307.06 BogoMIPS (lpj=2653534)
[ 0.752620] Security Framework initialized
[ 0.752679] SELinux: Initializing.
[ 0.752740] SELinux: Starting in permissive mode
[ 0.752744] selinux_register_security: Registering secondary module capability
[ 0.752836] Capability LSM initialized as secondary
[ 0.752900] Mount-cache hash table entries: 512
[ 0.753072] Initializing cgroup subsys ns
[ 0.753130] Initializing cgroup subsys cpuacct
[ 0.753196] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.753256] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.753301] CPU 0(2) -> Core 0
[ 0.753301] Intel machine check architecture supported.
[ 0.753301] Intel machine check reporting enabled on CPU#0.
[ 0.753373] Checking 'hlt' instruction... OK.
[ 0.758284] ACPI: Core revision 20080321
[ 0.764520] ENABLING IO-APIC IRQs
[ 0.764785] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.775031] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[ 0.775298] CPU 1 irqstacks, hard=c07b8000 soft=c0798000
[ 0.775298] Booting processor 1/1 ip 6000
[ 0.775298] Initializing CPU#1
[ 0.775298] Calibrating delay using timer specific routine.. 5199.66 BogoMIPS (lpj=2599831)
[ 0.775298] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.775298] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.775298] CPU 1(2) -> Core 1
[ 0.775298] Intel machine check architecture supported.
[ 0.775298] Intel machine check reporting enabled on CPU#1.
[ 0.775298] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.846287] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02
[ 0.846873] Brought up 2 CPUs
[ 0.846929] Total of 2 processors activated (10506.73 BogoMIPS).
[ 0.847027] CPU0 attaching sched-domain:
[ 0.847030] domain 0: span 0-1
[ 0.847032] groups: 0 1
[ 0.847035] CPU1 attaching sched-domain:
[ 0.847036] domain 0: span 0-1
[ 0.847038] groups: 1 0
[ 0.847287] net_namespace: 660 bytes
[ 0.847287] Booting paravirtualized kernel on bare hardware
[ 0.847287] NET: Registered protocol family 16
[ 0.847287] No dock devices found.
[ 0.848287] ACPI: bus type pci registered
[ 0.848287] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.848287] PCI: Not using MMCONFIG.
[ 0.848287] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 0.848287] PCI: Using configuration type 1 for base access
[ 0.848287] Setting up standard PCI resources
[ 0.853781] ACPI: EC: Look up EC in DSDT
[ 0.862284] ACPI: Interpreter enabled
[ 0.862284] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.862284] ACPI: Using IOAPIC for interrupt routing
[ 0.862284] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.866840] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.866899] PCI: Using MMCONFIG for extended config space
[ 0.875282] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.875282] PCI: Transparent bridge - 0000:00:06.0
[ 0.875582] bus 00 -> node 0
[ 0.875587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.875849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.876001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.876082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.876162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.876242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.876282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.876364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
[ 0.885281] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.885281] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.885667] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.886052] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.886438] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.886822] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.887186] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.887572] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.887956] ACPI: PCI Interrupt Link [LUB0] (IRQs 21 22 23) *7
[ 0.888301] ACPI: PCI Interrupt Link [LMAD] (IRQs 20) *5
[ 0.888605] ACPI: PCI Interrupt Link [LUB2] (IRQs 21 22 23) *10
[ 0.888949] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.889254] ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *10
[ 0.890280] ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *11
[ 0.890626] ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *5
[ 0.890970] ACPI: PCI Interrupt Link [LSA0] (IRQs 21 22 23) *11
[ 0.891316] ACPI: PCI Interrupt Link [LSA1] (IRQs 21 22 23) *5
[ 0.891692] ACPI: PCI Interrupt Link [LATA] (IRQs 21 22 23) *0, disabled.
[ 0.892056] ACPI: PCI Interrupt Link [LSA2] (IRQs 21 22 23) *10
[ 0.893280] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.893280] pnp: PnP ACPI init
[ 0.893280] ACPI: bus type pnp registered
[ 0.897250] pnp: PnP ACPI: found 14 devices
[ 0.897279] ACPI: ACPI bus type pnp unregistered
[ 0.897279] usbcore: registered new interface driver usbfs
[ 0.897279] usbcore: registered new interface driver hub
[ 0.897279] usbcore: registered new device driver usb
[ 0.898279] PCI: Using ACPI for IRQ routing
[ 0.899134] NetLabel: Initializing
[ 0.899190] NetLabel: domain hash size = 128
[ 0.899246] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.899279] NetLabel: unlabeled traffic allowed by default
[ 0.899279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.899279] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.900279] tracer: 643 pages allocated for 65536<6> entries of 40 bytes
[ 0.900279] actual entries 65586
[ 0.900402] Switched to high resolution mode on CPU 0
[ 0.900402] Switched to high resolution mode on CPU 1
[ 0.904437] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.904497] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.904558] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 0.904617] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 0.904680] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 0.904739] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 0.904798] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 0.904857] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 0.904916] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[ 0.904975] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[ 0.905034] system 00:05: iomem range 0xfbf80000-0xfbfbffff has been reserved
[ 0.905094] system 00:05: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 0.905191] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.905283] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.905316] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.905381] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.905444] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.905506] system 00:0c: iomem range 0xd0000000-0xdfffffff could not be reserved
[ 0.905601] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.905663] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.905722] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.905781] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.905873] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.936453] PCI: Bridge: 0000:00:06.0
[ 0.936509] IO window: disabled.
[ 0.937314] MEM window: disabled.
[ 0.937314] PREFETCH window: disabled.
[ 0.937314] PCI: Bridge: 0000:00:0a.0
[ 0.937314] IO window: disabled.
[ 0.937314] MEM window: disabled.
[ 0.937314] PREFETCH window: disabled.
[ 0.937314] PCI: Bridge: 0000:00:0b.0
[ 0.937314] IO window: disabled.
[ 0.937314] MEM window: disabled.
[ 0.937314] PREFETCH window: disabled.
[ 0.937314] PCI: Bridge: 0000:00:0c.0
[ 0.937314] IO window: disabled.
[ 0.937314] MEM window: disabled.
[ 0.937314] PREFETCH window: disabled.
[ 0.937360] PCI: Bridge: 0000:00:0d.0
[ 0.937415] IO window: disabled.
[ 0.937471] MEM window: disabled.
[ 0.937527] PREFETCH window: disabled.
[ 0.938357] PCI: Bridge: 0000:00:0e.0
[ 0.938357] IO window: disabled.
[ 0.938357] MEM window: disabled.
[ 0.938357] PREFETCH window: disabled.
[ 0.938357] PCI: Bridge: 0000:00:0f.0
[ 0.938357] IO window: e000-efff
[ 0.938357] MEM window: 0xfc000000-0xfebfffff
[ 0.938357] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
[ 0.938357] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.938357] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 0.938357] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.938357] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.938357] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.938357] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.938357] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 0.938357] NET: Registered protocol family 2
[ 0.941393] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.942315] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.942315] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.943355] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.943355] TCP reno registered
[ 0.944414] NET: Registered protocol family 1
[ 0.944570] checking if image is initramfs... it is
[ 1.121318] Freeing initrd memory: 2979k freed
[ 1.121367] audit: initializing netlink socket (disabled)
[ 1.121440] type=2000 audit(1210032464.429:1): initialized
[ 1.126264] highmem bounce pool size: 64 pages
[ 1.126264] Total HugeTLB memory allocated, 0
[ 1.128263] VFS: Disk quotas dquot_6.5.1
[ 1.128263] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.128267] msgmni has been set to 1748 for ipc namespace c07213a0
[ 1.128267] SELinux: Registering netfilter hooks
[ 1.129263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.129263] io scheduler noop registered
[ 1.129263] io scheduler anticipatory registered
[ 1.129263] io scheduler deadline registered
[ 1.129263] io scheduler cfq registered (default)
[ 1.129263] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 1.150233] pci 0000:07:00.0: Boot video device
[ 1.150233] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 1.150233] assign_interrupt_mode Found MSI capability
[ 1.150233] Allocate Port Service[0000:00:0a.0:pcie00]
[ 1.150233] Allocate Port Service[0000:00:0a.0:pcie03]
[ 1.150233] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 1.150233] assign_interrupt_mode Found MSI capability
[ 1.150233] Allocate Port Service[0000:00:0b.0:pcie00]
[ 1.150233] Allocate Port Service[0000:00:0b.0:pcie03]
[ 1.150233] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 1.150233] assign_interrupt_mode Found MSI capability
[ 1.150233] Allocate Port Service[0000:00:0c.0:pcie00]
[ 1.150233] Allocate Port Service[0000:00:0c.0:pcie03]
[ 1.150233] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 1.150233] assign_interrupt_mode Found MSI capability
[ 1.150233] Allocate Port Service[0000:00:0d.0:pcie00]
[ 1.150233] Allocate Port Service[0000:00:0d.0:pcie03]
[ 1.150234] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 1.150234] assign_interrupt_mode Found MSI capability
[ 1.150234] Allocate Port Service[0000:00:0e.0:pcie00]
[ 1.150234] Allocate Port Service[0000:00:0e.0:pcie03]
[ 1.150234] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 1.150234] assign_interrupt_mode Found MSI capability
[ 1.150234] Allocate Port Service[0000:00:0f.0:pcie00]
[ 1.150234] Allocate Port Service[0000:00:0f.0:pcie03]
[ 1.150234] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.150234] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.150234] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.150234] isapnp: Scanning for PnP cards...
[ 1.500945] isapnp: No Plug & Play device found
[ 1.503264] Real Time Clock Driver v1.12ac
[ 1.503334] hpet_resources: 0xfed00000 is busy
[ 1.503348] Non-volatile memory driver v1.2
[ 1.503405] Linux agpgart interface v0.103
[ 1.503771] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.506263] brd: module loaded
[ 1.506263] input: Macintosh mouse button emulation as /class/input/input0
[ 1.506263] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.508523] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.508528] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.510264] mice: PS/2 mouse device common for all mice
[ 1.552833] cpuidle: using governor ladder
[ 1.552833] cpuidle: using governor menu
[ 1.552833] usbcore: registered new interface driver hiddev
[ 1.552833] usbcore: registered new interface driver usbhid
[ 1.552833] usbhid: v2.6:USB HID core driver
[ 1.554238] TCP cubic registered
[ 1.554281] Initializing XFRM netlink socket
[ 1.554281] NET: Registered protocol family 17
[ 1.554281] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (2 cpu cores) (version 2.20.00)
[ 1.554354] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 1.554414] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 1.554472] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 1.554529] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 1.554591] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 1.554649] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 1.555246] Using IPI No-Shortcut mode
[ 1.555317] registered taskstats version 1
[ 1.555665] Freeing unused kernel memory: 280k freed
[ 1.555779] Write protecting the kernel text: 2204k
[ 1.555858] Write protecting the kernel read-only data: 952k
[ 1.825603] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 1.825671] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 1.825813] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 1.825815] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.825944] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.826055] ehci_hcd 0000:00:02.1: debug port 1
[ 1.826112] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 1.826126] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbffac00
[ 1.831451] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.831631] usb usb1: configuration #1 chosen from 1 choice
[ 1.832265] hub 1-0:1.0: USB hub found
[ 1.832332] hub 1-0:1.0: 10 ports detected
[ 2.036353] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.036638] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 2.036705] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 2.036846] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 2.036848] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.036964] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.037075] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbffb000
[ 2.089343] usb usb2: configuration #1 chosen from 1 choice
[ 2.089420] hub 2-0:1.0: USB hub found
[ 2.089482] hub 2-0:1.0: 10 ports detected
[ 2.137271] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 2.192268] USB Universal Host Controller Interface driver v3.0
[ 2.249538] SCSI subsystem initialized
[ 2.252981] usb 1-3: configuration #1 chosen from 1 choice
[ 2.262265] Driver 'sd' needs updating - please use bus_type methods
[ 2.280265] libata version 3.00 loaded.
[ 2.304453] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 2.305314] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 2.305314] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 2.305314] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 2.305314] ACPI: PCI interrupt for device 0000:00:05.0 disabled
[ 2.305314] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 2.305331] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 2.305474] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 2.305481] ACPI: PCI interrupt for device 0000:00:05.1 disabled
[ 2.306327] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 22
[ 2.306327] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 22 (level, low) -> IRQ 22
[ 2.306327] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 2.306327] ACPI: PCI interrupt for device 0000:00:05.2 disabled
[ 2.354374] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 2.469461] usb 1-4: configuration #1 chosen from 1 choice
[ 2.469649] hub 1-4:1.0: USB hub found
[ 2.469752] hub 1-4:1.0: 4 ports detected
[ 2.736389] usb 1-4.1: new low speed USB device using ehci_hcd and address 4
[ 2.830050] usb 1-4.1: configuration #1 chosen from 1 choice
[ 2.837386] input: Microsoft Microsoft IntelliMouse® Optical as /class/input/input1
[ 2.841294] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:02.1-4.1
[ 2.904388] usb 1-4.2: new low speed USB device using ehci_hcd and address 5
[ 2.990678] usb 1-4.2: configuration #1 chosen from 1 choice
[ 2.995482] input: DELL DELL USB Keyboard as /class/input/input2
[ 3.000295] input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:02.1-4.2
[ 3.009557] input: DELL DELL USB Keyboard as /class/input/input3
[ 3.013293] input,hidraw2: USB HID v1.10 Device [DELL DELL USB Keyboard] on usb-0000:00:02.1-4.2
[ 4.808270] pata_amd 0000:00:04.0: version 0.3.10
[ 4.808270] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 4.808270] scsi0 : pata_amd
[ 4.808270] scsi1 : pata_amd
[ 4.809265] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 4.809265] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.969680] ata1.00: ATA-6: IC35L090AVV207-0, V23OA63A, max UDMA/100
[ 4.969739] ata1.00: 160836480 sectors, multi 16: LBA48
[ 4.970025] ata1.01: ATA-6: Maxtor 32049H2, YAH814Y0, max UDMA/100
[ 4.970083] ata1.01: 39062500 sectors, multi 16: LBA
[ 4.970147] ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x15)
[ 4.970152] ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x15)
[ 4.979606] ata1.00: configured for UDMA/100
[ 4.985642] ata1.01: configured for UDMA/100
[ 4.985712] ata2: port disabled. ignoring.
[ 4.985795] scsi 0:0:0:0: Direct-Access ATA IC35L090AVV207-0 V23O PQ: 0 ANSI: 5
[ 4.985942] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 4.986009] sd 0:0:0:0: [sda] Write Protect is off
[ 4.986069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.986082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.986220] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 4.986294] sd 0:0:0:0: [sda] Write Protect is off
[ 4.986351] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.986365] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.986458] sda: sda1
[ 4.996957] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.997093] scsi 0:0:1:0: Direct-Access ATA Maxtor 32049H2 YAH8 PQ: 0 ANSI: 5
[ 4.997235] sd 0:0:1:0: [sdb] 39062500 512-byte hardware sectors (20000 MB)
[ 4.997308] sd 0:0:1:0: [sdb] Write Protect is off
[ 4.997365] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.997379] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.997499] sd 0:0:1:0: [sdb] 39062500 512-byte hardware sectors (20000 MB)
[ 4.997564] sd 0:0:1:0: [sdb] Write Protect is off
[ 4.997621] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.997635] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.997728] sdb: sdb1 sdb2 sdb3
[ 5.041249] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 7.767007] kjournald starting. Commit interval 5 seconds
[ 7.767076] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.337968] type=1404 audit(1210032471.645:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 8.758684] SELinux: 8192 avtab hash slots, 222567 rules.
[ 8.789752] SELinux: 8192 avtab hash slots, 222567 rules.
[ 8.812785] SELinux: 6 users, 12 roles, 2420 types, 115 bools, 1 sens, 1024 cats
[ 8.812789] SELinux: 67 classes, 222567 rules
[ 8.814151] SELinux: class peer not defined in policy
[ 8.814212] SELinux: class capability2 not defined in policy
[ 8.814284] SELinux: permission open in class dir not defined in policy
[ 8.814344] SELinux: permission open in class file not defined in policy
[ 8.814405] SELinux: permission open in class chr_file not defined in policy
[ 8.814464] SELinux: permission open in class blk_file not defined in policy
[ 8.814523] SELinux: permission open in class fifo_file not defined in policy
[ 8.814621] SELinux: permission recvfrom in class node not defined in policy
[ 8.814680] SELinux: permission sendto in class node not defined in policy
[ 8.814742] SELinux: permission ingress in class netif not defined in policy
[ 8.814801] SELinux: permission egress in class netif not defined in policy
[ 8.814890] SELinux: permission setfcap in class capability not defined in policy
[ 8.814991] SELinux: permission forward_in in class packet not defined in policy
[ 8.815087] SELinux: permission forward_out in class packet not defined in policy
[ 8.815292] SELinux: Completing initialization.
[ 8.815294] SELinux: Setting up existing superblocks.
[ 8.832406] SELinux: initialized (dev sdb1, type ext3), uses xattr
[ 9.074333] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 9.074342] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 9.074413] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 9.074434] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 9.074441] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 9.074446] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 9.074453] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 9.074456] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 9.074462] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
[ 9.074467] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 9.074470] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 9.074475] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 9.074503] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 9.074509] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 9.074518] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 9.074522] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 9.074539] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 9.081580] SELinux: policy loaded with handle_unknown=allow
[ 9.081647] type=1403 audit(1210032472.389:3): policy loaded auid=4294967295 ses=4294967295
[ 13.857267] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 13.857267] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 14.490263] ck804xrom ck804xrom_init_one(): Unable to register resource 0x0000000000000000-0x00000000ffffffff - kernel bug?
[ 14.490263] ck804xrom: ioremap(00000000, 00000000) failed
[ 14.566263] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 14.566263] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[ 14.655353] input: Power Button (FF) as /class/input/input4
[ 14.658806] ACPI: Power Button (FF) [PWRF]
[ 14.658883] input: Power Button (CM) as /class/input/input5
[ 14.671265] ACPI: Power Button (CM) [PWRB]
[ 14.771264] input: PC Speaker as /class/input/input6
[ 14.924266] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 14.924579] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 14.924587] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 14.924592] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 15.439553] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:45:c9:df
[ 15.439557] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 15.439862] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
[ 15.439865] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 20 (level, low) -> IRQ 20
[ 15.439870] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 15.953575] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:45:c9:de
[ 15.953579] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 15.953919] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 15.953922] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 15.953954] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 15.953957] ALSA sound/pci/hda/hda_intel.c:1904: chipset global capabilities = 0x4401
[ 15.961264] ALSA sound/pci/hda/hda_intel.c:745: codec_mask = 0x1
[ 15.964013] ALSA sound/pci/hda/hda_codec.c:2350: hda_codec: model '6stack-dig' is selected for config 1462:7250 (MSI)
[ 15.987565] ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Volume, skipped
[ 15.987568] ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Volume, skipped
[ 15.987571] ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Volume, skipped
[ 15.987575] ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Line-Out Playback Volume, skipped
[ 15.987582] ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Switch, skipped
[ 15.987585] ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Switch, skipped
[ 18.284265] SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
[ 19.453207] NET: Registered protocol family 10
[ 19.453582] lo: Disabled Privacy Extensions
[ 20.126604] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 20.126614] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 25.477061] device-mapper: uevent: version 1.0.3
[ 25.478269] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 25.957265] device-mapper: multipath: version 1.0.5 loaded
[ 27.595289] EXT3 FS on sdb1, internal journal
[ 28.073374] SELinux: initialized (dev sdb3, type ext2), uses xattr
[ 28.073374] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 30.260087] Adding 1004052k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:1004052k
[ 30.263317] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 31.012458] warning: process `kudzu' used the deprecated sysctl system call with 1.23.
[ 31.491265] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 31.778265] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.917263] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 32.692273] Clocksource tsc unstable (delta = -128636385 ns)
[ 34.157624] eth1: no link during initialization.
[ 34.158570] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 40.994347] warning: `mcstransd' uses 32-bit capabilities (legacy support in use)
[ 41.876268] RPC: Registered udp transport module.
[ 41.876268] RPC: Registered tcp transport module.
[ 41.882760] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 42.910792] fuse init (API version 7.9)
[ 42.924495] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 43.039274] eth0: no IPv6 routers present
[ 51.269360] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 51.860320] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 52.004268] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 52.511785] Bluetooth: Core ver 2.11
[ 52.512495] NET: Registered protocol family 31
[ 52.512498] Bluetooth: HCI device and connection manager initialized
[ 52.512502] Bluetooth: HCI socket layer initialized
[ 52.722717] Bluetooth: L2CAP ver 2.9
[ 52.722722] Bluetooth: L2CAP socket layer initialized
[ 52.780407] Bluetooth: RFCOMM socket layer initialized
[ 52.780423] Bluetooth: RFCOMM TTY layer initialized
[ 52.780425] Bluetooth: RFCOMM ver 1.8
[ 58.815497] ALSA sound/pci/hda/hda_intel.c:1318: azx_pcm_prepare: bufsize=0x1800, format=0x4011
[ 58.816268] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
[ 58.818408] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
[ 58.820306] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
[ 58.822359] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
[ 58.824277] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
[ 58.826308] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
[ 58.826308] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
[ 58.826308] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
[ 58.826308] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
[ 58.826308] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
[ 89.548599] ALSA sound/pci/hda/hda_intel.c:1318: azx_pcm_prepare: bufsize=0x4400, format=0x4011
[ 89.548670] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
[ 89.550324] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
[ 89.552321] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
[ 89.554321] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
[ 89.556321] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
[ 89.558323] ALSA sound/pci/hda/hda_intel.c:1318: azx_pcm_prepare: bufsize=0x4400, format=0x4011
[ 89.558388] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
[ 89.560322] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
[ 89.562321] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
[ 89.564321] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
[ 89.566321] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
[ 89.649320] ALSA sound/pci/hda/hda_intel.c:1318: azx_pcm_prepare: bufsize=0x4400, format=0x4011
[ 89.649320] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
[ 89.650328] ALSA sound/pci/hda/hda_intel.c:1318: azx_pcm_prepare: bufsize=0x4400, format=0x4011
[ 89.650336] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
[ 90.958267] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
[ 90.958267] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
[ 90.959316] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
[ 90.959316] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
[ 90.959316] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
[ 90.959316] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
[ 90.959316] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
[ 90.959325] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
[ 90.959328] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
[ 90.959331] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
[ 90.959334] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
[ 125.956320] ALSA sound/pci/hda/hda_intel.c:1318: azx_pcm_prepare: bufsize=0x10000, format=0x11
[ 125.956320] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x11
[ 125.957330] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x11
[ 125.959323] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x11
[ 125.961323] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x11
[ 125.963323] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x11
[ 125.968731] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
[ 125.968741] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
[ 125.968746] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
[ 125.968751] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
[ 125.968756] ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
[ 129.020672] ALSA sound/pci/hda/hda_intel.c:1318: azx_pcm_prepare: bufsize=0x10000, format=0x11
[ 129.021376] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x11
[ 129.023329] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x11
[ 129.025325] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x11
[ 129.027321] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x11
[ 129.029321] ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x11
[ 699.281316] oprofile: using NMI interrupt.
[ 699.298314] SELinux: initialized (dev oprofilefs, type oprofilefs), uses genfs_contexts
[ 706.684483] BUG: unable to handle kernel paging request at fa4213d8
[ 706.684488] IP: [<f8b9e4f3>] :oprofile:alloc_cpu_buffers+0x39/0xce
[ 706.684496] *pde = 00000000
[ 706.684500] Oops: 0002 [#1] SMP
[ 706.684502] last sysfs file: /sys/devices/pci0000:00/0000:00:09.0/irq
[ 706.684505] Modules linked in: oprofile cpufreq_stats rfcomm l2cap bluetooth autofs4 fuse sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand dm_crypt ext2 dm_mirror dm_log dm_multipath scsi_dh dm_mod ipv6 snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss forcedeth snd_pcm snd_timer snd_page_alloc snd_hwdep pcspkr k8temp snd soundcore button i2c_nforce2 i2c_core mtd chipreg map_funcs serio_raw hwmon sg pata_amd pata_acpi ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
[ 706.684537]
[ 706.684539] Pid: 7857, comm: oprofiled Not tainted (2.6.26-rc1-next-20080505 #21)
[ 706.684542] EIP: 0060:[<f8b9e4f3>] EFLAGS: 00210286 CPU: 0
[ 706.684547] EIP is at alloc_cpu_buffers+0x39/0xce [oprofile]
[ 706.684550] EAX: f8ba6000 EBX: fa4213c0 ECX: f8b9e4f1 EDX: 00000000
[ 706.684552] ESI: 00000000 EDI: 00002000 EBP: 00010000 ESP: f45cfe98
[ 706.684554] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 706.684556] Process oprofiled (pid: 7857, ti=f45cf000 task=f6314f00 task.ti=f45cf000)
[ 706.684558] Stack: ffffffea f6228180 00000000 f8b9ec99 f8b9e119 ffffffea f6228180 f8b9ecd2
[ 706.684563] f6228180 f3363988 c047f42d f453cd80 f29cf3b8 f45cff14 f6228180 f45cff14
[ 706.684568] 00000001 c047f543 f6228180 00000000 00000000 f45cff14 c0489f07 00000000
[ 706.684572] Call Trace:
[ 706.684575] [<f8b9ec99>] event_buffer_open+0x0/0x55 [oprofile]
[ 706.684582] [<f8b9e119>] oprofile_setup+0x11/0x84 [oprofile]
[ 706.684588] [<f8b9ecd2>] event_buffer_open+0x39/0x55 [oprofile]
[ 706.684595] [<c047f42d>] __dentry_open+0x118/0x212
[ 706.684602] [<c047f543>] nameidata_to_filp+0x1c/0x2c
[ 706.684607] [<c0489f07>] do_filp_open+0x35a/0x6c3
[ 706.684612] [<c041bcf8>] kunmap_atomic+0x67/0x87
[ 706.684617] [<c046e520>] handle_mm_fault+0x6e7/0x6f8
[ 706.684621] [<c0470e14>] mmap_region+0x2de/0x394
[ 706.684633] [<c047f23f>] do_sys_open+0x40/0xb0
[ 706.684638] [<c047f2f3>] sys_open+0x1e/0x23
[ 706.684643] [<c0404a92>] syscall_call+0x7/0xb
[ 706.684653] =======================
[ 706.684654] Code: 8d 2c fd 00 00 00 00 53 e8 f8 28 95 c7 89 c6 e9 8d 00 00 00 bb c0 43 ba f8 31 d2 89 e8 03 1c b5 c0 5e 74 c0 e8 d2 56 8d c7 85 c0 <89> 43 18 74 7e 8d 43 34 c7 43 04 00 00 00 00 89 73 2c c7 43 0c
[ 706.684677] EIP: [<f8b9e4f3>] alloc_cpu_buffers+0x39/0xce [oprofile] SS:ESP 0068:f45cfe98
[ 706.684684] ---[ end trace 4f359ae625277917 ]---
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2008-05-05 22:33 BUG: unable to handle kernel paging request thomas
@ 2008-05-07 6:55 ` Andrew Morton
0 siblings, 0 replies; 17+ messages in thread
From: Andrew Morton @ 2008-05-07 6:55 UTC (permalink / raw)
To: thomas; +Cc: linux-kernel, Mike Travis
On Tue, 06 May 2008 00:33:04 +0200 thomas@m3y3r.de wrote:
> See also attached config and dmesg:
>
>
> [ 706.684483] BUG: unable to handle kernel paging request at fa4213d8
> [ 706.684488] IP: [<f8b9e4f3>] :oprofile:alloc_cpu_buffers+0x39/0xce
> [ 706.684496] *pde = 00000000
> [ 706.684500] Oops: 0002 [#1] SMP
> [ 706.684502] last sysfs file: /sys/devices/pci0000:00/0000:00:09.0/irq
> [ 706.684505] Modules linked in: oprofile cpufreq_stats rfcomm l2cap bluetooth
> autofs4 fuse sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state
> nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT
> ip6table_filter ip6_tables x_tables cpufreq_ondemand dm_crypt ext2 dm_mirror
> dm_log dm_multipath scsi_dh dm_mod ipv6 snd_hda_intel snd_seq_dummy snd_seq_oss
> snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss forcedeth
> snd_pcm snd_timer snd_page_alloc snd_hwdep pcspkr k8temp snd soundcore button
> i2c_nforce2 i2c_core mtd chipreg map_funcs serio_raw hwmon sg pata_amd
> pata_acpi ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd
> ehci_hcd [last unloaded: scsi_wait_scan]
> [ 706.684537]
> [ 706.684539] Pid: 7857, comm: oprofiled Not tainted (2.6.26-rc1-next-20080505
> #21)
> [ 706.684542] EIP: 0060:[<f8b9e4f3>] EFLAGS: 00210286 CPU: 0
> [ 706.684547] EIP is at alloc_cpu_buffers+0x39/0xce [oprofile]
> [ 706.684550] EAX: f8ba6000 EBX: fa4213c0 ECX: f8b9e4f1 EDX: 00000000
> [ 706.684552] ESI: 00000000 EDI: 00002000 EBP: 00010000 ESP: f45cfe98
> [ 706.684554] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> [ 706.684556] Process oprofiled (pid: 7857, ti=f45cf000 task=f6314f00
> task.ti=f45cf000)
> [ 706.684558] Stack: ffffffea f6228180 00000000 f8b9ec99 f8b9e119 ffffffea
> f6228180 f8b9ecd2
> [ 706.684563] f6228180 f3363988 c047f42d f453cd80 f29cf3b8 f45cff14
> f6228180 f45cff14
> [ 706.684568] 00000001 c047f543 f6228180 00000000 00000000 f45cff14
> c0489f07 00000000
> [ 706.684572] Call Trace:
> [ 706.684575] [<f8b9ec99>] event_buffer_open+0x0/0x55 [oprofile]
> [ 706.684582] [<f8b9e119>] oprofile_setup+0x11/0x84 [oprofile]
> [ 706.684588] [<f8b9ecd2>] event_buffer_open+0x39/0x55 [oprofile]
> [ 706.684595] [<c047f42d>] __dentry_open+0x118/0x212
> [ 706.684602] [<c047f543>] nameidata_to_filp+0x1c/0x2c
> [ 706.684607] [<c0489f07>] do_filp_open+0x35a/0x6c3
> [ 706.684612] [<c041bcf8>] kunmap_atomic+0x67/0x87
> [ 706.684617] [<c046e520>] handle_mm_fault+0x6e7/0x6f8
> [ 706.684621] [<c0470e14>] mmap_region+0x2de/0x394
> [ 706.684633] [<c047f23f>] do_sys_open+0x40/0xb0
> [ 706.684638] [<c047f2f3>] sys_open+0x1e/0x23
> [ 706.684643] [<c0404a92>] syscall_call+0x7/0xb
> [ 706.684653] =======================
> [ 706.684654] Code: 8d 2c fd 00 00 00 00 53 e8 f8 28 95 c7 89 c6 e9 8d 00 00
> 00
> bb c0 43 ba f8 31 d2 89 e8 03 1c b5 c0 5e 74 c0 e8 d2 56 8d c7 85 c0 <89> 43 18
> 74 7e 8d 43 34 c7 43 04 00 00 00 00 89 73 2c c7 43 0c
> [ 706.684677] EIP: [<f8b9e4f3>] alloc_cpu_buffers+0x39/0xce [oprofile] SS:ESP
> 0068:f45cfe98
> [ 706.684684] ---[ end trace 4f359ae625277917 ]---
hrm. This:
commit 608dfddd845da5ab6accef70154c8910529699f7
Author: Mike Travis <travis@sgi.com>
Date: Mon Apr 28 02:14:15 2008 -0700
oprofile: change cpu_buffer from array to per_cpu variable
Change cpu_buffer from array to per_cpu variable in oprofile functions.
has to be a prime suspect. But why?
oprofile works OK here.
Does this revert patch fix it for you?
drivers/oprofile/buffer_sync.c | 2 +-
drivers/oprofile/cpu_buffer.c | 16 ++++++++--------
drivers/oprofile/cpu_buffer.h | 3 +--
drivers/oprofile/oprofile_stats.c | 4 ++--
4 files changed, 12 insertions(+), 13 deletions(-)
diff -puN drivers/oprofile/buffer_sync.c~revert-1 drivers/oprofile/buffer_sync.c
--- a/drivers/oprofile/buffer_sync.c~revert-1
+++ a/drivers/oprofile/buffer_sync.c
@@ -491,7 +491,7 @@ typedef enum {
*/
void sync_buffer(int cpu)
{
- struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu);
+ struct oprofile_cpu_buffer * cpu_buf = &cpu_buffer[cpu];
struct mm_struct *mm = NULL;
struct task_struct * new;
unsigned long cookie = 0;
diff -puN drivers/oprofile/cpu_buffer.c~revert-1 drivers/oprofile/cpu_buffer.c
--- a/drivers/oprofile/cpu_buffer.c~revert-1
+++ a/drivers/oprofile/cpu_buffer.c
@@ -27,7 +27,7 @@
#include "buffer_sync.h"
#include "oprof.h"
-DEFINE_PER_CPU_SHARED_ALIGNED(struct oprofile_cpu_buffer, cpu_buffer);
+struct oprofile_cpu_buffer cpu_buffer[NR_CPUS] __cacheline_aligned;
static void wq_sync_buffer(struct work_struct *work);
@@ -39,7 +39,7 @@ void free_cpu_buffers(void)
int i;
for_each_online_cpu(i)
- vfree(per_cpu(cpu_buffer, i).buffer);
+ vfree(cpu_buffer[i].buffer);
}
int alloc_cpu_buffers(void)
@@ -49,7 +49,7 @@ int alloc_cpu_buffers(void)
unsigned long buffer_size = fs_cpu_buffer_size;
for_each_online_cpu(i) {
- struct oprofile_cpu_buffer *b = &per_cpu(cpu_buffer, i);
+ struct oprofile_cpu_buffer * b = &cpu_buffer[i];
b->buffer = vmalloc_node(sizeof(struct op_sample) * buffer_size,
cpu_to_node(i));
@@ -83,7 +83,7 @@ void start_cpu_work(void)
work_enabled = 1;
for_each_online_cpu(i) {
- struct oprofile_cpu_buffer *b = &per_cpu(cpu_buffer, i);
+ struct oprofile_cpu_buffer * b = &cpu_buffer[i];
/*
* Spread the work by 1 jiffy per cpu so they dont all
@@ -100,7 +100,7 @@ void end_cpu_work(void)
work_enabled = 0;
for_each_online_cpu(i) {
- struct oprofile_cpu_buffer *b = &per_cpu(cpu_buffer, i);
+ struct oprofile_cpu_buffer * b = &cpu_buffer[i];
cancel_delayed_work(&b->work);
}
@@ -227,7 +227,7 @@ static void oprofile_end_trace(struct op
void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
unsigned long event, int is_kernel)
{
- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
+ struct oprofile_cpu_buffer * cpu_buf = &cpu_buffer[smp_processor_id()];
if (!backtrace_depth) {
log_sample(cpu_buf, pc, is_kernel, event);
@@ -254,13 +254,13 @@ void oprofile_add_sample(struct pt_regs
void oprofile_add_pc(unsigned long pc, int is_kernel, unsigned long event)
{
- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
+ struct oprofile_cpu_buffer * cpu_buf = &cpu_buffer[smp_processor_id()];
log_sample(cpu_buf, pc, is_kernel, event);
}
void oprofile_add_trace(unsigned long pc)
{
- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer);
+ struct oprofile_cpu_buffer * cpu_buf = &cpu_buffer[smp_processor_id()];
if (!cpu_buf->tracing)
return;
diff -puN drivers/oprofile/cpu_buffer.h~revert-1 drivers/oprofile/cpu_buffer.h
--- a/drivers/oprofile/cpu_buffer.h~revert-1
+++ a/drivers/oprofile/cpu_buffer.h
@@ -14,7 +14,6 @@
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/cache.h>
-#include <linux/sched.h>
struct task_struct;
@@ -48,7 +47,7 @@ struct oprofile_cpu_buffer {
struct delayed_work work;
} ____cacheline_aligned;
-DECLARE_PER_CPU(struct oprofile_cpu_buffer, cpu_buffer);
+extern struct oprofile_cpu_buffer cpu_buffer[];
void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf);
diff -puN drivers/oprofile/oprofile_stats.c~revert-1 drivers/oprofile/oprofile_stats.c
--- a/drivers/oprofile/oprofile_stats.c~revert-1
+++ a/drivers/oprofile/oprofile_stats.c
@@ -23,7 +23,7 @@ void oprofile_reset_stats(void)
int i;
for_each_possible_cpu(i) {
- cpu_buf = &per_cpu(cpu_buffer, i);
+ cpu_buf = &cpu_buffer[i];
cpu_buf->sample_received = 0;
cpu_buf->sample_lost_overflow = 0;
cpu_buf->backtrace_aborted = 0;
@@ -49,7 +49,7 @@ void oprofile_create_stats_files(struct
return;
for_each_possible_cpu(i) {
- cpu_buf = &per_cpu(cpu_buffer, i);
+ cpu_buf = &cpu_buffer[i];
snprintf(buf, 10, "cpu%d", i);
cpudir = oprofilefs_mkdir(sb, dir, buf);
_
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2011-03-27 16:00 ` Américo Wang
2011-03-27 17:44 ` Anca Emanuel
@ 2011-03-27 17:52 ` Stephen Wilson
1 sibling, 0 replies; 17+ messages in thread
From: Stephen Wilson @ 2011-03-27 17:52 UTC (permalink / raw)
To: Américo Wang; +Cc: Linus Torvalds, Anca Emanuel, Al Viro, Luck, Tony, LKML
On Mon, Mar 28, 2011 at 12:00:44AM +0800, Américo Wang wrote:
> On Sun, Mar 27, 2011 at 11:37 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
> > Al, this smells like your /proc cleanups/fixes...
> >
> > On Sun, Mar 27, 2011 at 2:16 AM, Anca Emanuel <anca.emanuel@gmail.com> wrote:
> >> Hi, I'm using latest kernel git.
> >>
> >>
> >> [15117.080119] BUG: unable to handle kernel paging request at fffffffffffffff3
> >
> > That's "-13" (possibly -EACCES)
> >
> >> [15117.080152] IP: [<ffffffff811b4989>] vma_stop+0x19/0x40
> >
> > .. and the code disassembles to
> >
> > 0: 55 push %rbp
> > 1: 48 89 e5 mov %rsp,%rbp
> > 4: 53 push %rbx
> > 5: 48 83 ec 08 sub $0x8,%rsp
> > 9: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
> > e: 48 85 f6 test %rsi,%rsi
> > 11: 74 1a je 0x2d
> > 13: 48 39 77 10 cmp %rsi,0x10(%rdi)
> > 17: 74 14 je 0x2d
> > 19: 8b 1e mov (%rsi),%ebx
> > 1b: 48 8d 7b 60 lea 0x60(%rbx),%rdi
> > 1f: e8 eb 2f ed ff callq up_read
> >
> > where that instruction at 0x19 is the access "mm = vma->vm_mm". So
> > it's vma that is -EPERM.
> >
> > I bet it's due to commit ec6fd8a4355c ("report errors in /proc/*/*map*
> > sanely"), which replaces NULL with various ERR_PTR() cases.
> >
>
> Exactly... should be fixed by something like:
>
> diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
> index 7c708a4..6b82632 100644
> --- a/fs/proc/task_mmu.c
> +++ b/fs/proc/task_mmu.c
> @@ -90,7 +90,7 @@ static void pad_len_spaces(struct seq_file *m, int len)
>
> static void vma_stop(struct proc_maps_private *priv, struct
> vm_area_struct *vma)
> {
> - if (vma && vma != priv->tail_vma) {
> + if (vma && !IS_ERR(vma) && vma != priv->tail_vma) {
> struct mm_struct *mm = vma->vm_mm;
> up_read(&mm->mmap_sem);
> mmput(mm);
FWIW, that looks like the right fix to me.
Also CC'ing Tony Luck as he reported what appears to be the same issue
on the 25'th.
--
steve
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2011-03-27 16:00 ` Américo Wang
@ 2011-03-27 17:44 ` Anca Emanuel
2011-03-27 17:52 ` Stephen Wilson
1 sibling, 0 replies; 17+ messages in thread
From: Anca Emanuel @ 2011-03-27 17:44 UTC (permalink / raw)
To: Américo Wang; +Cc: Linus Torvalds, Al Viro, LKML
On Sun, Mar 27, 2011 at 7:00 PM, Américo Wang <xiyou.wangcong@gmail.com> wrote:
> Exactly... should be fixed by something like:
>
> diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
> index 7c708a4..6b82632 100644
> --- a/fs/proc/task_mmu.c
> +++ b/fs/proc/task_mmu.c
> @@ -90,7 +90,7 @@ static void pad_len_spaces(struct seq_file *m, int len)
>
> static void vma_stop(struct proc_maps_private *priv, struct
> vm_area_struct *vma)
> {
> - if (vma && vma != priv->tail_vma) {
> + if (vma && !IS_ERR(vma) && vma != priv->tail_vma) {
> struct mm_struct *mm = vma->vm_mm;
> up_read(&mm->mmap_sem);
> mmput(mm);
>
I tested the patch and works ok now. Thanks Américo Wang !
Without it, I can reproduce the bug.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2011-03-27 15:37 ` Linus Torvalds
@ 2011-03-27 16:00 ` Américo Wang
2011-03-27 17:44 ` Anca Emanuel
2011-03-27 17:52 ` Stephen Wilson
0 siblings, 2 replies; 17+ messages in thread
From: Américo Wang @ 2011-03-27 16:00 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Anca Emanuel, Al Viro, LKML
On Sun, Mar 27, 2011 at 11:37 PM, Linus Torvalds
<torvalds@linux-foundation.org> wrote:
> Al, this smells like your /proc cleanups/fixes...
>
> On Sun, Mar 27, 2011 at 2:16 AM, Anca Emanuel <anca.emanuel@gmail.com> wrote:
>> Hi, I'm using latest kernel git.
>>
>>
>> [15117.080119] BUG: unable to handle kernel paging request at fffffffffffffff3
>
> That's "-13" (possibly -EACCES)
>
>> [15117.080152] IP: [<ffffffff811b4989>] vma_stop+0x19/0x40
>
> .. and the code disassembles to
>
> 0: 55 push %rbp
> 1: 48 89 e5 mov %rsp,%rbp
> 4: 53 push %rbx
> 5: 48 83 ec 08 sub $0x8,%rsp
> 9: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
> e: 48 85 f6 test %rsi,%rsi
> 11: 74 1a je 0x2d
> 13: 48 39 77 10 cmp %rsi,0x10(%rdi)
> 17: 74 14 je 0x2d
> 19: 8b 1e mov (%rsi),%ebx
> 1b: 48 8d 7b 60 lea 0x60(%rbx),%rdi
> 1f: e8 eb 2f ed ff callq up_read
>
> where that instruction at 0x19 is the access "mm = vma->vm_mm". So
> it's vma that is -EPERM.
>
> I bet it's due to commit ec6fd8a4355c ("report errors in /proc/*/*map*
> sanely"), which replaces NULL with various ERR_PTR() cases.
>
Exactly... should be fixed by something like:
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 7c708a4..6b82632 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -90,7 +90,7 @@ static void pad_len_spaces(struct seq_file *m, int len)
static void vma_stop(struct proc_maps_private *priv, struct
vm_area_struct *vma)
{
- if (vma && vma != priv->tail_vma) {
+ if (vma && !IS_ERR(vma) && vma != priv->tail_vma) {
struct mm_struct *mm = vma->vm_mm;
up_read(&mm->mmap_sem);
mmput(mm);
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2011-03-27 9:16 Anca Emanuel
@ 2011-03-27 15:37 ` Linus Torvalds
2011-03-27 16:00 ` Américo Wang
0 siblings, 1 reply; 17+ messages in thread
From: Linus Torvalds @ 2011-03-27 15:37 UTC (permalink / raw)
To: Anca Emanuel, Al Viro; +Cc: LKML
Al, this smells like your /proc cleanups/fixes...
On Sun, Mar 27, 2011 at 2:16 AM, Anca Emanuel <anca.emanuel@gmail.com> wrote:
> Hi, I'm using latest kernel git.
>
>
> [15117.080119] BUG: unable to handle kernel paging request at fffffffffffffff3
That's "-13" (possibly -EACCES)
> [15117.080152] IP: [<ffffffff811b4989>] vma_stop+0x19/0x40
.. and the code disassembles to
0: 55 push %rbp
1: 48 89 e5 mov %rsp,%rbp
4: 53 push %rbx
5: 48 83 ec 08 sub $0x8,%rsp
9: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
e: 48 85 f6 test %rsi,%rsi
11: 74 1a je 0x2d
13: 48 39 77 10 cmp %rsi,0x10(%rdi)
17: 74 14 je 0x2d
19: 8b 1e mov (%rsi),%ebx
1b: 48 8d 7b 60 lea 0x60(%rbx),%rdi
1f: e8 eb 2f ed ff callq up_read
where that instruction at 0x19 is the access "mm = vma->vm_mm". So
it's vma that is -EPERM.
I bet it's due to commit ec6fd8a4355c ("report errors in /proc/*/*map*
sanely"), which replaces NULL with various ERR_PTR() cases.
> [15117.080660] Call Trace:
> [15117.080671] [<ffffffff811b4a3a>] m_stop+0x1a/0x40
> [15117.080685] [<ffffffff8117d991>] seq_read+0x1e1/0x420
> [15117.080698] [<ffffffff8115c685>] vfs_read+0xc5/0x190
> [15117.080711] [<ffffffff8115c851>] sys_read+0x51/0x90
> [15117.080724] [<ffffffff815b2d02>] system_call_fastpath+0x16/0x1b
Al?
Linus
^ permalink raw reply [flat|nested] 17+ messages in thread
* BUG: unable to handle kernel paging request
@ 2011-03-27 9:16 Anca Emanuel
2011-03-27 15:37 ` Linus Torvalds
0 siblings, 1 reply; 17+ messages in thread
From: Anca Emanuel @ 2011-03-27 9:16 UTC (permalink / raw)
To: LKML; +Cc: Linus Torvalds
[-- Attachment #1: Type: text/plain, Size: 2980 bytes --]
Hi, I'm using latest kernel git.
[15117.080119] BUG: unable to handle kernel paging request at fffffffffffffff3
[15117.080152] IP: [<ffffffff811b4989>] vma_stop+0x19/0x40
[15117.080172] PGD 1a05067 PUD 1a06067 PMD 0
[15117.080191] Oops: 0000 [#1] SMP
[15117.080204] last sysfs file:
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/uevent
[15117.080222] CPU 1
[15117.080229] Modules linked in: binfmt_misc parport_pc ppdev
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm
snd_seq_midi snd_rawmidi adt7475 hwmon_vid snd_seq_midi_event snd_seq
nouveau snd_timer snd_seq_device ttm snd drm_kms_helper soundcore drm
snd_page_alloc i2c_algo_bit psmouse serio_raw video r8169 intel_agp
intel_gtt lp parport mii pata_marvell ahci libahci
[15117.080379]
[15117.080387] Pid: 1446, comm: chromium-browse Not tainted
2.6.38-git18+ #3 MICRO-STAR INTERNATIONAL CO.,LTD MS-7360/MS-7360
[15117.080412] RIP: 0010:[<ffffffff811b4989>] [<ffffffff811b4989>]
vma_stop+0x19/0x40
[15117.080430] RSP: 0018:ffff8800654a3e48 EFLAGS: 00010213
[15117.080440] RAX: 00000000fffffff3 RBX: ffff88006c6ae7e0 RCX: 0000000000000013
[15117.080453] RDX: ffffffff81619200 RSI: fffffffffffffff3 RDI: ffff88006c6ae7e0
[15117.080465] RBP: ffff8800654a3e58 R08: 0000000000000001 R09: 0000000000000000
[15117.080478] R10: 0000000000000022 R11: 0000000000000293 R12: ffff88002509aa00
[15117.080490] R13: fffffffffffffff3 R14: ffff88005d142480 R15: ffff8800654a3ec0
[15117.080503] FS: 00007ff183615920(0000) GS:ffff88007fc80000(0000)
knlGS:0000000000000000
[15117.080517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[15117.080529] CR2: fffffffffffffff3 CR3: 00000000654ab000 CR4: 00000000000006e0
[15117.080541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[15117.080554] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[15117.080567] Process chromium-browse (pid: 1446, threadinfo
ffff8800654a2000, task ffff88006a05db00)
[15117.080581] Stack:
[15117.080588] 0000000000000000 ffff88006c6ae7e0 ffff8800654a3e78
ffffffff811b4a3a
[15117.080613] ffff88005d142480 ffff88005d142480 ffff8800654a3ef8
ffffffff8117d991
[15117.080637] 00000000fffffff3 00007fff1aecb250 ffff88002509aa38
ffff8800654a3f48
[15117.080660] Call Trace:
[15117.080671] [<ffffffff811b4a3a>] m_stop+0x1a/0x40
[15117.080685] [<ffffffff8117d991>] seq_read+0x1e1/0x420
[15117.080698] [<ffffffff8115c685>] vfs_read+0xc5/0x190
[15117.080711] [<ffffffff8115c851>] sys_read+0x51/0x90
[15117.080724] [<ffffffff815b2d02>] system_call_fastpath+0x16/0x1b
[15117.080736] Code: c9 90 c3 eb 0d 90 90 90 90 90 90 90 90 90 90 90
90 90 55 48 89 e5 53 48 83 ec 08 0f 1f 44 00 00 48 85 f6 74 1a 48 39
77 10 74 14
[15117.080872] 8b 1e 48 8d 7b 60 e8 eb 2f ed ff 48 89 df e8 43 9b ea ff 48
[15117.080940] RIP [<ffffffff811b4989>] vma_stop+0x19/0x40
[15117.080955] RSP <ffff8800654a3e48>
[15117.080963] CR2: fffffffffffffff3
[15117.113062] ---[ end trace 4aa56b1e030e2b1e ]---
[-- Attachment #2: error.txt --]
[-- Type: text/plain, Size: 55930 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-git18+ (root@ubuntu) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #3 SMP Sat Mar 26 11:34:32 EET 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-git18+ root=UUID=47201eff-5173-4e6e-8a5d-731e1fe17b0e ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360/MS-7360, BIOS V1.10 11/11/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ffb0000 @ 7ffac000-7ffb0000
[ 0.000000] RAMDISK: 37538000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f9bb0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffb0000 00040 (v01 111108 RSDT0906 20081111 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffb0200 00084 (v01 111108 FACP0906 20081111 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffb0440 05595 (v01 0AAAA 0AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000007ffbe000 00040
[ 0.000000] ACPI: APIC 000000007ffb0390 0006C (v01 111108 APIC0906 20081111 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffb0400 0003C (v01 111108 OEMMCFG 20081111 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ffbe040 00071 (v01 111108 OEMB0906 20081111 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ffb59e0 00038 (v01 111108 OEMHPET 20081111 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007ffbe0c0 02024 (v01 111108 GMCHSCI 20081111 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000007ffc0570 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ffb0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000007ffb0000
[ 0.000000] NODE_DATA [000000007ffa7000 - 000000007ffabfff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffb0
[ 0.000000] On node 0 totalpages: 524095
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 513001 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s84480 r8192 d22016 u524288
[ 0.000000] pcpu-alloc: s84480 r8192 d22016 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516923
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-git18+ root=UUID=47201eff-5173-4e6e-8a5d-731e1fe17b0e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2042868k/2096832k available (5851k kernel code, 452k absent, 53512k reserved, 5072k data, 964k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.845 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.69 BogoMIPS (lpj=20008450)
[ 0.010010] pid_max: default: 32768 minimum: 301
[ 0.010040] Security Framework initialized
[ 0.010058] AppArmor: AppArmor initialized
[ 0.010319] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011418] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011895] Mount-cache hash table entries: 256
[ 0.012060] Initializing cgroup subsys ns
[ 0.012065] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.012069] Initializing cgroup subsys cpuacct
[ 0.012074] Initializing cgroup subsys memory
[ 0.012083] Initializing cgroup subsys devices
[ 0.012086] Initializing cgroup subsys freezer
[ 0.012089] Initializing cgroup subsys net_cls
[ 0.012125] CPU: Physical Processor ID: 0
[ 0.012127] CPU: Processor Core ID: 0
[ 0.012130] mce: CPU supports 6 MCE banks
[ 0.012139] CPU0: Thermal monitoring enabled (TM2)
[ 0.012144] using mwait in idle threads.
[ 0.015127] ACPI: Core revision 20110316
[ 0.018199] ftrace: allocating 22214 entries in 88 pages
[ 0.020064] Setting APIC routing to flat
[ 0.020371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.129404] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.130000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.130000] PEBS disabled due to CPU errata.
[ 0.130000] ... version: 2
[ 0.130000] ... bit width: 40
[ 0.130000] ... generic registers: 2
[ 0.130000] ... value mask: 000000ffffffffff
[ 0.130000] ... max period: 000000007fffffff
[ 0.130000] ... fixed-purpose events: 3
[ 0.130000] ... event mask: 0000000700000003
[ 0.130000] Booting Node 0, Processors #1
[ 0.130000] smpboot cpu 1: start_ip = 9a000
[ 0.290019] Brought up 2 CPUs
[ 0.290023] Total of 2 processors activated (8003.08 BogoMIPS).
[ 0.290402] devtmpfs: initialized
[ 0.290402] PM: Registering ACPI NVS region at 7ffbe000 (204800 bytes)
[ 0.290949] print_constraints: dummy:
[ 0.290973] Time: 7:52:12 Date: 03/27/11
[ 0.291015] NET: Registered protocol family 16
[ 0.291121] ACPI: bus type pci registered
[ 0.291178] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.291182] PCI: not using MMCONFIG
[ 0.291184] PCI: Using configuration type 1 for base access
[ 0.291999] bio: create slab <bio-0> at 0
[ 0.291999] ACPI: EC: Detected MSI hardware, enabling workarounds.
[ 0.291999] ACPI: EC: Look up EC in DSDT
[ 0.292768] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.295198] ACPI: SSDT 000000007ffc00f0 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.295512] ACPI: Dynamic OEM Table Load:
[ 0.295516] ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.295757] ACPI: SSDT 000000007ffc0330 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.296066] ACPI: Dynamic OEM Table Load:
[ 0.296069] ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.296320] ACPI: Interpreter enabled
[ 0.296324] ACPI: (supports S0 S3 S4 S5)
[ 0.296343] ACPI: Using IOAPIC for interrupt routing
[ 0.296366] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.300300] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.344144] ACPI: No dock devices found.
[ 0.344148] HEST: Table not found.
[ 0.344152] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.344333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.344505] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.344509] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.344512] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.344515] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.344518] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
[ 0.344520] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.344535] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.344583] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[ 0.344619] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.344623] pci 0000:00:01.0: PME# disabled
[ 0.344665] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.344710] pci 0000:00:1a.0: reg 20: [io 0xbc00-0xbc1f]
[ 0.344756] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.344801] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
[ 0.344857] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.344880] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.344955] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.344960] pci 0000:00:1a.7: PME# disabled
[ 0.344987] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.345004] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.345060] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.345065] pci 0000:00:1b.0: PME# disabled
[ 0.345085] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.345142] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.345147] pci 0000:00:1c.0: PME# disabled
[ 0.345172] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.345228] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.345233] pci 0000:00:1c.4: PME# disabled
[ 0.345255] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.345312] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.345316] pci 0000:00:1c.5: PME# disabled
[ 0.345341] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.345386] pci 0000:00:1d.0: reg 20: [io 0xb800-0xb81f]
[ 0.345432] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.345477] pci 0000:00:1d.1: reg 20: [io 0xb480-0xb49f]
[ 0.345523] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.345568] pci 0000:00:1d.2: reg 20: [io 0xb400-0xb41f]
[ 0.345614] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
[ 0.345659] pci 0000:00:1d.3: reg 20: [io 0xb080-0xb09f]
[ 0.345715] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.345737] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.345813] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.345818] pci 0000:00:1d.7: PME# disabled
[ 0.345838] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.345897] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
[ 0.345981] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.346021] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
[ 0.346038] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
[ 0.346047] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
[ 0.346055] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
[ 0.346064] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
[ 0.346073] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
[ 0.346081] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
[ 0.346120] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.346136] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[ 0.346159] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.346193] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[ 0.346210] pci 0000:00:1f.5: reg 10: [io 0xa000-0xa007]
[ 0.346219] pci 0000:00:1f.5: reg 14: [io 0x9c00-0x9c03]
[ 0.346227] pci 0000:00:1f.5: reg 18: [io 0x9880-0x9887]
[ 0.346236] pci 0000:00:1f.5: reg 1c: [io 0x9800-0x9803]
[ 0.346245] pci 0000:00:1f.5: reg 20: [io 0x9480-0x948f]
[ 0.346254] pci 0000:00:1f.5: reg 24: [io 0x9400-0x940f]
[ 0.346328] pci 0000:01:00.0: [10de:0611] type 0 class 0x000300
[ 0.346340] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.346353] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.346365] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.346374] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]
[ 0.346382] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.346428] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.346432] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.346435] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
[ 0.346440] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.346482] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.346487] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.346491] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.346498] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.346557] pci 0000:03:00.0: [11ab:6121] type 0 class 0x000101
[ 0.346575] pci 0000:03:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.346588] pci 0000:03:00.0: reg 14: [io 0xd880-0xd883]
[ 0.346600] pci 0000:03:00.0: reg 18: [io 0xd800-0xd807]
[ 0.346613] pci 0000:03:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.346626] pci 0000:03:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.346639] pci 0000:03:00.0: reg 24: [mem 0xfeaffc00-0xfeafffff]
[ 0.346684] pci 0000:03:00.0: supports D1
[ 0.346687] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.346692] pci 0000:03:00.0: PME# disabled
[ 0.346710] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.346720] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.346724] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.346728] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.346735] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.346801] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.346821] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.346853] pci 0000:04:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.346891] pci 0000:04:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.346939] pci 0000:04:00.0: supports D1 D2
[ 0.346941] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.346947] pci 0000:04:00.0: PME# disabled
[ 0.346970] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.346980] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.346984] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.346989] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.346995] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.347059] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.347063] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.347068] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.347074] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.347078] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.347081] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.347083] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.347086] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.347089] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[ 0.347092] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.347115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.347205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.347292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.347329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.347358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.347466] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.347607] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.355074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.355124] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.355168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.355216] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.355263] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.355311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.355358] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.355405] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.355549] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.355553] vgaarb: loaded
[ 0.355704] SCSI subsystem initialized
[ 0.355731] libata version 3.00 loaded.
[ 0.355731] usbcore: registered new interface driver usbfs
[ 0.355731] usbcore: registered new interface driver hub
[ 0.355731] usbcore: registered new device driver usb
[ 0.355731] wmi: Mapper loaded
[ 0.355731] PCI: Using ACPI for IRQ routing
[ 0.355731] PCI: pci_cache_line_size set to 64 bytes
[ 0.355731] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.355731] reserve RAM buffer: 000000007ffb0000 - 000000007fffffff
[ 0.355731] NetLabel: Initializing
[ 0.355731] NetLabel: domain hash size = 128
[ 0.355731] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.355731] NetLabel: unlabeled traffic allowed by default
[ 0.355731] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.355731] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.355731] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.360019] Switching to clocksource hpet
[ 0.367559] AppArmor: AppArmor Filesystem Enabled
[ 0.367597] pnp: PnP ACPI init
[ 0.367614] ACPI: bus type pnp registered
[ 0.367754] pnp 00:00: [bus 00-ff]
[ 0.367757] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.367760] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.367763] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.367765] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.367768] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.367770] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.367772] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.367842] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.367853] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.367914] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.367918] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.367955] pnp 00:02: [dma 4]
[ 0.367957] pnp 00:02: [io 0x0000-0x000f]
[ 0.367960] pnp 00:02: [io 0x0081-0x0083]
[ 0.367962] pnp 00:02: [io 0x0087]
[ 0.367964] pnp 00:02: [io 0x0089-0x008b]
[ 0.367966] pnp 00:02: [io 0x008f]
[ 0.367967] pnp 00:02: [io 0x00c0-0x00df]
[ 0.367992] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.368004] pnp 00:03: [io 0x0070-0x0071]
[ 0.368016] pnp 00:03: [irq 8]
[ 0.368040] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.368050] pnp 00:04: [io 0x0061]
[ 0.368074] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.368083] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.368089] pnp 00:05: [irq 13]
[ 0.368117] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.368343] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.368349] pnp 00:06: [irq 4]
[ 0.368351] pnp 00:06: [dma 0 disabled]
[ 0.368418] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.368640] pnp 00:07: [io 0x0060]
[ 0.368643] pnp 00:07: [io 0x0064]
[ 0.368648] pnp 00:07: [irq 1]
[ 0.368676] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.368721] pnp 00:08: [irq 12]
[ 0.368749] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.368834] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.368837] pnp 00:09: [io 0x0a00-0x0adf]
[ 0.368839] pnp 00:09: [io 0x0ae0-0x0aef]
[ 0.368889] system 00:09: [io 0x0a00-0x0adf] has been reserved
[ 0.368892] system 00:09: [io 0x0ae0-0x0aef] has been reserved
[ 0.368896] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.368968] pnp 00:0a: [io 0x0010-0x001f]
[ 0.368971] pnp 00:0a: [io 0x0022-0x003f]
[ 0.368973] pnp 00:0a: [io 0x0044-0x005f]
[ 0.368975] pnp 00:0a: [io 0x0062-0x0063]
[ 0.368977] pnp 00:0a: [io 0x0065-0x006f]
[ 0.368979] pnp 00:0a: [io 0x0072-0x007f]
[ 0.368981] pnp 00:0a: [io 0x0080]
[ 0.368983] pnp 00:0a: [io 0x0084-0x0086]
[ 0.368985] pnp 00:0a: [io 0x0088]
[ 0.368987] pnp 00:0a: [io 0x008c-0x008e]
[ 0.368989] pnp 00:0a: [io 0x0090-0x009f]
[ 0.368991] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.368993] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.368995] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.368997] pnp 00:0a: [io 0x0800-0x087f]
[ 0.368999] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.369002] pnp 00:0a: [io 0x0480-0x04bf]
[ 0.369004] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.369006] pnp 00:0a: [mem 0xfed20000-0xfed8ffff]
[ 0.369078] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.369081] system 00:0a: [io 0x0800-0x087f] has been reserved
[ 0.369084] system 00:0a: [io 0x0480-0x04bf] has been reserved
[ 0.369087] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.369090] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.369094] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369154] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.369185] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.369233] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
[ 0.369236] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.369264] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.369305] pnp 00:0d: [mem 0xffc00000-0xffefffff]
[ 0.369354] system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.369358] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369434] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[ 0.369437] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[ 0.369489] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.369492] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.369496] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369534] pnp 00:0f: [mem 0xe0000000-0xefffffff]
[ 0.369583] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.369587] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.369750] pnp 00:10: [mem 0x00000000-0x0009ffff]
[ 0.369753] pnp 00:10: [mem 0x000c0000-0x000cffff]
[ 0.369755] pnp 00:10: [mem 0x000e0000-0x000fffff]
[ 0.369758] pnp 00:10: [mem 0x00100000-0x7fffffff]
[ 0.369760] pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.369823] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.369827] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.369830] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.369833] system 00:10: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.369837] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.369906] Switched to NOHz mode on CPU #0
[ 0.369942] Switched to NOHz mode on CPU #1
[ 0.369985] pnp: PnP ACPI: found 17 devices
[ 0.369987] ACPI: ACPI bus type pnp unregistered
[ 0.376085] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.376089] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.376092] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.376097] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
[ 0.376101] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.376106] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.376109] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.376114] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.376118] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.376125] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.376128] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.376133] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.376138] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.376144] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.376147] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.376152] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.376156] pci 0000:00:1c.5: bridge window [mem pref disabled]
[ 0.376163] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.376165] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.376170] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.376174] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.376196] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.376200] pci 0000:00:01.0: setting latency timer to 64
[ 0.376206] pci 0000:00:1c.0: enabling device (0104 -> 0105)
[ 0.376214] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.376219] pci 0000:00:1c.0: setting latency timer to 64
[ 0.376226] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.376230] pci 0000:00:1c.4: setting latency timer to 64
[ 0.376236] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.376241] pci 0000:00:1c.5: setting latency timer to 64
[ 0.376248] pci 0000:00:1e.0: setting latency timer to 64
[ 0.376252] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.376254] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.376257] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.376260] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.376262] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.376265] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.376268] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.376270] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff]
[ 0.376273] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.376276] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.376279] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.376282] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.376284] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.376287] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.376290] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.376292] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.376295] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.376298] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.376300] pci_bus 0000:05: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.376303] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.376343] NET: Registered protocol family 2
[ 0.376463] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.377194] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.379140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.379616] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.379620] TCP reno registered
[ 0.379636] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.379659] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.379809] NET: Registered protocol family 1
[ 0.380030] pci 0000:01:00.0: Boot video device
[ 0.380040] PCI: CLS 32 bytes, default 64
[ 0.380102] Trying to unpack rootfs image as initramfs...
[ 0.646233] Freeing initrd memory: 10976k freed
[ 0.651597] audit: initializing netlink socket (disabled)
[ 0.651612] type=2000 audit(1301212331.650:1): initialized
[ 0.676323] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.678300] VFS: Disk quotas dquot_6.5.2
[ 0.678363] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.679050] fuse init (API version 7.16)
[ 0.679149] msgmni has been set to 4011
[ 0.679385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.679388] io scheduler noop registered
[ 0.679390] io scheduler deadline registered
[ 0.679434] io scheduler cfq registered (default)
[ 0.679554] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.679590] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.679654] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.679693] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.679781] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.679820] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.679902] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.679939] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.680065] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.680068] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.680072] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.680090] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.680095] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.680112] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.680115] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.680119] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.680138] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.680141] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.680146] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.680165] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.680226] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 1462 ss_did 7360
[ 0.680245] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.680257] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 1462 ss_did 7360
[ 0.680274] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.680286] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 1462 ss_did 7360
[ 0.680303] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 0.680311] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.680399] intel_idle: MWAIT substates: 0x220
[ 0.680401] intel_idle: does not run on family 6 model 15
[ 0.680490] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.680496] ACPI: Power Button [PWRB]
[ 0.680542] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.680545] ACPI: Power Button [PWRF]
[ 0.680711] ACPI: acpi_idle registered with cpuidle
[ 0.682680] ERST: Table is not found!
[ 0.682760] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.703273] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.860770] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.861118] Linux agpgart interface v0.103
[ 0.862185] brd: module loaded
[ 0.862680] loop: module loaded
[ 0.862892] ata_piix 0000:00:1f.2: version 2.13
[ 0.862914] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.862920] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.862963] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.863194] scsi0 : ata_piix
[ 0.863284] scsi1 : ata_piix
[ 0.864291] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.864296] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.864347] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.864361] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.864400] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.864583] scsi2 : ata_piix
[ 0.864648] scsi3 : ata_piix
[ 0.865474] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.865478] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.865551] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.865583] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 0.865598] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 0.865917] Fixed MDIO Bus: probed
[ 0.865950] PPP generic driver version 2.4.2
[ 0.866007] tun: Universal TUN/TAP device driver, 1.6
[ 0.866009] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.866098] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.866124] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.866141] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.866145] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.866189] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.866246] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.870132] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.870152] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.890010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.890131] hub 1-0:1.0: USB hub found
[ 0.890136] hub 1-0:1.0: 4 ports detected
[ 0.890215] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.890228] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.890232] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.890275] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.900043] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.903910] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.903926] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.920013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.920123] hub 2-0:1.0: USB hub found
[ 0.920128] hub 2-0:1.0: 8 ports detected
[ 0.920205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.920220] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.920256] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.920264] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.920267] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.920313] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.920367] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[ 0.920500] hub 3-0:1.0: USB hub found
[ 0.920505] hub 3-0:1.0: 2 ports detected
[ 0.920571] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.920578] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.920582] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.920622] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.920677] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.920798] hub 4-0:1.0: USB hub found
[ 0.920803] hub 4-0:1.0: 2 ports detected
[ 0.920862] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.920868] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.920872] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.920909] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.930044] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[ 0.930167] hub 5-0:1.0: USB hub found
[ 0.930171] hub 5-0:1.0: 2 ports detected
[ 0.930232] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.930238] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.930241] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.930277] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.930319] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
[ 0.930440] hub 6-0:1.0: USB hub found
[ 0.930444] hub 6-0:1.0: 2 ports detected
[ 0.930504] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.930511] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.930515] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.930552] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.930595] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[ 0.930719] hub 7-0:1.0: USB hub found
[ 0.930723] hub 7-0:1.0: 2 ports detected
[ 0.930788] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.930794] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.930797] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.930844] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.930890] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b080
[ 0.931016] hub 8-0:1.0: USB hub found
[ 0.931020] hub 8-0:1.0: 2 ports detected
[ 0.931148] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.933445] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.933453] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.933576] mousedev: PS/2 mouse device common for all mice
[ 0.933690] rtc_cmos 00:03: RTC can wake from S4
[ 0.933801] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.933826] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.933923] device-mapper: uevent: version 1.0.3
[ 0.934000] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.934081] device-mapper: multipath: version 1.3.0 loaded
[ 0.934084] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.934160] cpuidle: using governor ladder
[ 0.934163] cpuidle: using governor menu
[ 0.934165] EFI Variables Facility v0.08 2004-May-17
[ 0.934433] TCP cubic registered
[ 0.934563] NET: Registered protocol family 10
[ 0.935081] NET: Registered protocol family 17
[ 0.935100] Registering the dns_resolver key type
[ 0.935840] PM: Hibernation image not present or could not be loaded.
[ 0.935854] registered taskstats version 1
[ 0.936198] Magic number: 3:91:876
[ 0.936298] rtc_cmos 00:03: setting system clock to 2011-03-27 07:52:12 UTC (1301212332)
[ 0.936301] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.936303] EDD information not available.
[ 0.959344] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.220737] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.231497] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.380043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.380144] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.400125] ata2.00: ATAPI: PIONEER DVD-RW DVR-212D, 1.24, max UDMA/66
[ 1.400352] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 1.400356] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.420280] ata1.00: configured for UDMA/133
[ 1.420406] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.420550] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.420553] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.420615] sd 0:0:0:0: [sda] Write Protect is off
[ 1.420619] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.420653] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.440129] ata2.00: configured for UDMA/66
[ 1.446913] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.24 PQ: 0 ANSI: 5
[ 1.458519] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.458523] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.458631] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.458685] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.477077] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.477428] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.479458] Freeing unused kernel memory: 964k freed
[ 1.479743] Write protecting the kernel read-only data: 10240k
[ 1.480992] Freeing unused kernel memory: 272k freed
[ 1.487277] Freeing unused kernel memory: 1576k freed
[ 1.509498] udev[64]: starting version 163
[ 1.599639] ahci 0000:03:00.0: version 3.0
[ 1.612938] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.612980] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.613498] scsi4 : pata_marvell
[ 1.613597] scsi5 : pata_marvell
[ 1.613641] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 1.613645] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[ 1.650064] Refined TSC clocksource calibration: 2000.699 MHz.
[ 1.650069] Switching to clocksource tsc
[ 1.859435] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.086955] Adding 2147324k swap on /dev/sda6. Priority:-1 extents:1 across:2147324k
[ 4.137256] udev[245]: starting version 163
[ 4.489685] lp: driver loaded but no devices found
[ 4.640701] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.640733] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.640783] r8169 0000:04:00.0: setting latency timer to 64
[ 4.640860] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 4.641639] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc900109c4000, 00:1d:92:33:07:c1, XID 18000000 IRQ 44
[ 5.150121] [drm] Initialized drm 1.1.0 20060810
[ 5.456066] type=1400 audit(1301201537.005:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=410 comm="apparmor_parser"
[ 5.456152] type=1400 audit(1301201537.005:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
[ 5.456210] type=1400 audit(1301201537.005:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
[ 5.458695] type=1400 audit(1301201537.005:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=446 comm="apparmor_parser"
[ 5.458784] type=1400 audit(1301201537.005:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=446 comm="apparmor_parser"
[ 5.458843] type=1400 audit(1301201537.005:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=446 comm="apparmor_parser"
[ 5.469839] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 5.509112] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.509120] nouveau 0000:01:00.0: setting latency timer to 64
[ 5.511299] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092880a2)
[ 5.517680] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 5.571853] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 5.571859] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 5.571862] [drm] nouveau 0000:01:00.0: Bios version 62.92.1f.00
[ 5.571866] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 5.571869] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 5.571873] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[ 5.571876] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000030
[ 5.571879] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 5.571881] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
[ 5.571884] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[ 5.571887] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 5.571891] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 5.571894] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 5.571897] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 5.571900] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 5.571903] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 5.571908] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC10F
[ 5.595915] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC4B3
[ 5.598748] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD22E
[ 5.598756] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD350
[ 5.599824] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD580
[ 5.599827] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD5E5
[ 5.619835] [drm] nouveau 0000:01:00.0: 0xD5E5: Condition still not met after 20ms, skipping following opcodes
[ 5.793336] IPv4 FIB: Using LC-trie version 0.409
[ 5.887894] adt7475 0-002e: ADT7473 device, revision 1
[ 5.897643] [drm] nouveau 0000:01:00.0: Detected monitoring device: adt7473
[ 5.897649] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 5.897654] [drm] nouveau 0000:01:00.0: 3: memory 900MHz core 600MHz shader 1500MHz fanspeed 100%
[ 5.897671] [drm] nouveau 0000:01:00.0: c: memory 399MHz core 399MHz shader 810MHz voltage 1050mV
[ 5.897813] [TTM] Zone kernel: Available graphics memory: 1028328 kiB.
[ 5.897816] [TTM] Initializing pool allocator.
[ 5.897830] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[ 5.900568] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 5.926845] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 5.926849] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 5.927675] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.927678] [drm] No driver support for vblank timestamp query.
[ 6.198919] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.198977] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.199004] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.255713] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x40000000, bo ffff88007b45dc00
[ 6.317584] Console: switching to colour frame buffer device 210x65
[ 6.319689] fb0: nouveaufb frame buffer device
[ 6.319691] drm: registered panic notifier
[ 6.319700] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 6.428482] hda_codec: ALC888: BIOS auto-probing.
[ 6.433505] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 8.163932] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 8.262137] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.017533] type=1400 audit(1301201540.565:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=716 comm="apparmor_parser"
[ 9.017623] type=1400 audit(1301201540.565:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=716 comm="apparmor_parser"
[ 9.017681] type=1400 audit(1301201540.565:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=716 comm="apparmor_parser"
[ 9.054575] type=1400 audit(1301201540.605:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=715 comm="apparmor_parser"
[ 9.241800] type=1400 audit(1301201540.795:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=712 comm="apparmor_parser"
[ 9.241953] type=1400 audit(1301201540.795:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=712 comm="apparmor_parser"
[ 9.397819] ppdev: user-space parallel port driver
[ 9.402386] type=1400 audit(1301201540.955:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=726 comm="apparmor_parser"
[ 9.402578] type=1400 audit(1301201540.955:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=726 comm="apparmor_parser"
[ 9.520125] type=1400 audit(1301201541.075:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=735 comm="apparmor_parser"
[ 9.826007] r8169 0000:04:00.0: eth0: link down
[ 9.826340] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.514129] r8169 0000:04:00.0: eth0: link up
[ 11.514393] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.281243] type=1400 audit(1301201545.835:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=724 comm="apparmor_parser"
[ 14.282092] type=1400 audit(1301201545.835:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=724 comm="apparmor_parser"
[ 14.282662] type=1400 audit(1301201545.835:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=724 comm="apparmor_parser"
[ 16.041487] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 16.241597] EXT4-fs (sda7): re-mounted. Opts: user_xattr,commit=0
[ 21.830011] eth0: no IPv6 routers present
[ 45.612888] exe (1661): /proc/1661/oom_adj is deprecated, please use /proc/1661/oom_score_adj instead.
[15117.080119] BUG: unable to handle kernel paging request at fffffffffffffff3
[15117.080152] IP: [<ffffffff811b4989>] vma_stop+0x19/0x40
[15117.080172] PGD 1a05067 PUD 1a06067 PMD 0
[15117.080191] Oops: 0000 [#1] SMP
[15117.080204] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/uevent
[15117.080222] CPU 1
[15117.080229] Modules linked in: binfmt_misc parport_pc ppdev snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi adt7475 hwmon_vid snd_seq_midi_event snd_seq nouveau snd_timer snd_seq_device ttm snd drm_kms_helper soundcore drm snd_page_alloc i2c_algo_bit psmouse serio_raw video r8169 intel_agp intel_gtt lp parport mii pata_marvell ahci libahci
[15117.080379]
[15117.080387] Pid: 1446, comm: chromium-browse Not tainted 2.6.38-git18+ #3 MICRO-STAR INTERNATIONAL CO.,LTD MS-7360/MS-7360
[15117.080412] RIP: 0010:[<ffffffff811b4989>] [<ffffffff811b4989>] vma_stop+0x19/0x40
[15117.080430] RSP: 0018:ffff8800654a3e48 EFLAGS: 00010213
[15117.080440] RAX: 00000000fffffff3 RBX: ffff88006c6ae7e0 RCX: 0000000000000013
[15117.080453] RDX: ffffffff81619200 RSI: fffffffffffffff3 RDI: ffff88006c6ae7e0
[15117.080465] RBP: ffff8800654a3e58 R08: 0000000000000001 R09: 0000000000000000
[15117.080478] R10: 0000000000000022 R11: 0000000000000293 R12: ffff88002509aa00
[15117.080490] R13: fffffffffffffff3 R14: ffff88005d142480 R15: ffff8800654a3ec0
[15117.080503] FS: 00007ff183615920(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
[15117.080517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[15117.080529] CR2: fffffffffffffff3 CR3: 00000000654ab000 CR4: 00000000000006e0
[15117.080541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[15117.080554] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[15117.080567] Process chromium-browse (pid: 1446, threadinfo ffff8800654a2000, task ffff88006a05db00)
[15117.080581] Stack:
[15117.080588] 0000000000000000 ffff88006c6ae7e0 ffff8800654a3e78 ffffffff811b4a3a
[15117.080613] ffff88005d142480 ffff88005d142480 ffff8800654a3ef8 ffffffff8117d991
[15117.080637] 00000000fffffff3 00007fff1aecb250 ffff88002509aa38 ffff8800654a3f48
[15117.080660] Call Trace:
[15117.080671] [<ffffffff811b4a3a>] m_stop+0x1a/0x40
[15117.080685] [<ffffffff8117d991>] seq_read+0x1e1/0x420
[15117.080698] [<ffffffff8115c685>] vfs_read+0xc5/0x190
[15117.080711] [<ffffffff8115c851>] sys_read+0x51/0x90
[15117.080724] [<ffffffff815b2d02>] system_call_fastpath+0x16/0x1b
[15117.080736] Code: c9 90 c3 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 53 48 83 ec 08 0f 1f 44 00 00 48 85 f6 74 1a 48 39 77 10 74 14
[15117.080872] 8b 1e 48 8d 7b 60 e8 eb 2f ed ff 48 89 df e8 43 9b ea ff 48
[15117.080940] RIP [<ffffffff811b4989>] vma_stop+0x19/0x40
[15117.080955] RSP <ffff8800654a3e48>
[15117.080963] CR2: fffffffffffffff3
[15117.113062] ---[ end trace 4aa56b1e030e2b1e ]---
^ permalink raw reply [flat|nested] 17+ messages in thread
* BUG: unable to handle kernel paging request
@ 2010-05-31 1:24 Thomas Fjellstrom
0 siblings, 0 replies; 17+ messages in thread
From: Thomas Fjellstrom @ 2010-05-31 1:24 UTC (permalink / raw)
To: linux-kernel
I've been seeing some rather strange OOPSes and BUG messages from my older
AMD machine. Here is just the latest one, which didn't actually cause the
entire machine to lock up solid.
I've done a memtest, and it was solid, so actual memory errors seems to
be unlikely.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-13) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 SMP Wed May 19 19:51:54 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fff8000 - 0000000080000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0E0000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 377b7000 - 37fef725
[ 0.000000] Allocated new RAMDISK: 00100000 - 00938725
[ 0.000000] Move RAMDISK from 00000000377b7000 - 0000000037fef724 to 00100000 - 00938724
[ 0.000000] ACPI: RSDP 000fa9f0 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 7fff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP 7fff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7fff0120 03718 (v01 VIA VIA_K7 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 7fff8000 00040
[ 0.000000] ACPI: APIC 7fff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c4154] TEXT DATA BSS ==> [0001000000 - 00014c4154]
[ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
[ 0.000000] #5 [00014c5000 - 00014cb108] BRK ==> [00014c5000 - 00014cb108]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000938725] NEW RAMDISK ==> [0000100000 - 0000938725]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00fb990] fb990
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cd200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2328 pages used for memmap
[ 0.000000] HighMem zone: 295642 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34136 r0 d23208 u4194304
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=956b3463-56e8-4aa3-8eca-b7f5e9ef90b3 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007fff0)
[ 0.000000] Memory: 2065056k/2097088k available (2490k kernel code, 30644k reserved, 1317k data, 376k init, 1191880k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1417000 ( 376 kB)
[ 0.000000] .data : 0xc126ebad - 0xc13b81e0 (1317 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126ebad (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1670.783 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3341.56 BogoMIPS (lpj=6683132)
[ 0.004037] Security Framework initialized
[ 0.004049] SELinux: Disabled at boot.
[ 0.004060] Mount-cache hash table entries: 512
[ 0.004260] Initializing cgroup subsys ns
[ 0.004266] Initializing cgroup subsys cpuacct
[ 0.004272] Initializing cgroup subsys devices
[ 0.004276] Initializing cgroup subsys freezer
[ 0.004280] Initializing cgroup subsys net_cls
[ 0.004312] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004317] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004323] mce: CPU supports 4 MCE banks
[ 0.004351] Performance Events: AMD PMU driver.
[ 0.004360] ... version: 0
[ 0.004363] ... bit width: 48
[ 0.004366] ... generic registers: 4
[ 0.004369] ... value mask: 0000ffffffffffff
[ 0.004372] ... max period: 00007fffffffffff
[ 0.004374] ... fixed-purpose events: 0
[ 0.004377] ... event mask: 000000000000000f
[ 0.004383] Checking 'hlt' instruction... OK.
[ 0.020364] SMP alternatives: switching to UP code
[ 0.024576] Freeing SMP alternatives: 13k freed
[ 0.024593] ACPI: Core revision 20090903
[ 0.031652] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032848] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072560] CPU0: AMD Athlon(tm) XP 2200+ stepping 00
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (3341.56 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] devtmpfs: initialized
[ 0.076001] regulator: core version 0.5
[ 0.076001] NET: Registered protocol family 16
[ 0.076001] ACPI: bus type pci registered
[ 0.076001] PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
[ 0.076001] PCI: Using configuration type 1 for base access
[ 0.076001] bio: create slab <bio-0> at 0
[ 0.076001] ACPI: EC: Look up EC in DSDT
[ 0.081794] ACPI: Interpreter enabled
[ 0.081804] ACPI: (supports S0 S1 S4 S5)
[ 0.081829] ACPI: Using IOAPIC for interrupt routing
[ 0.085752] ACPI: Power Resource [URP1] (off)
[ 0.085790] ACPI: Power Resource [URP2] (off)
[ 0.085826] ACPI: Power Resource [FDDP] (off)
[ 0.085862] ACPI: Power Resource [LPTP] (off)
[ 0.086013] ACPI: No dock devices found.
[ 0.086162] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.086220] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.086308] pci 0000:00:01.0: supports D1
[ 0.086347] pci 0000:00:05.0: reg 10 32bit mmio: [0xdffec000-0xdffeffff]
[ 0.086355] pci 0000:00:05.0: reg 14 io port: [0xec00-0xecff]
[ 0.086377] pci 0000:00:05.0: reg 30 32bit mmio pref: [0xdffc0000-0xdffdffff]
[ 0.086397] pci 0000:00:05.0: supports D1 D2
[ 0.086401] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.086406] pci 0000:00:05.0: PME# disabled
[ 0.086448] pci 0000:00:08.0: reg 10 32bit mmio pref: [0xdfdf0000-0xdfdfffff]
[ 0.086482] pci 0000:00:08.0: reg 30 32bit mmio pref: [0xdfff0000-0xdfff7fff]
[ 0.086539] pci 0000:00:0f.0: reg 10 io port: [0xe800-0xe807]
[ 0.086547] pci 0000:00:0f.0: reg 14 io port: [0xe400-0xe403]
[ 0.086555] pci 0000:00:0f.0: reg 18 io port: [0xe000-0xe007]
[ 0.086562] pci 0000:00:0f.0: reg 1c io port: [0xdc00-0xdc03]
[ 0.086569] pci 0000:00:0f.0: reg 20 io port: [0xd800-0xd80f]
[ 0.086577] pci 0000:00:0f.0: reg 24 io port: [0xd400-0xd4ff]
[ 0.086643] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.086719] pci 0000:00:10.0: reg 20 io port: [0xd000-0xd01f]
[ 0.086743] pci 0000:00:10.0: supports D1 D2
[ 0.086746] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.086751] pci 0000:00:10.0: PME# disabled
[ 0.086785] pci 0000:00:10.4: reg 10 32bit mmio: [0xdffe7e00-0xdffe7eff]
[ 0.086822] pci 0000:00:10.4: supports D1 D2
[ 0.086826] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.086830] pci 0000:00:10.4: PME# disabled
[ 0.086888] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.086962] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.086969] pci 0000:01:00.0: reg 14 io port: [0xb800-0xb8ff]
[ 0.086976] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfef0000-0xdfefffff]
[ 0.086992] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfec0000-0xdfedffff]
[ 0.087010] pci 0000:01:00.0: supports D1 D2
[ 0.087038] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xc8000000-0xcfffffff]
[ 0.087046] pci 0000:01:00.1: reg 14 32bit mmio: [0xdfee0000-0xdfeeffff]
[ 0.087074] pci 0000:01:00.1: supports D1 D2
[ 0.087117] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.087122] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.087127] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbfd00000-0xdfcfffff]
[ 0.087136] pci_bus 0000:00: on NUMA node 0
[ 0.087142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.089345] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.089466] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.089585] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.089701] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.089818] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.089934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.090052] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.090168] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.090295] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.090300] vgaarb: loaded
[ 0.090385] PCI: Using ACPI for IRQ routing
[ 0.090573] Switching to clocksource tsc
[ 0.091997] pnp: PnP ACPI init
[ 0.091997] ACPI: bus type pnp registered
[ 0.091997] pnp: PnP ACPI: found 8 devices
[ 0.091997] ACPI: ACPI bus type pnp unregistered
[ 0.091997] PnPBIOS: Disabled by ACPI PNP
[ 0.091997] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.091997] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.091997] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.091997] system 00:01: ioport range 0x400-0x40f has been reserved
[ 0.091997] system 00:01: ioport range 0x820-0x821 has been reserved
[ 0.091997] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.126758] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.126763] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.126770] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.126775] pci 0000:00:01.0: PREFETCH window: 0xbfd00000-0xdfcfffff
[ 0.126793] pci 0000:00:01.0: setting latency timer to 64
[ 0.126800] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.126804] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.126808] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.126812] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.126816] pci_bus 0000:01: resource 2 pref mem [0xbfd00000-0xdfcfffff]
[ 0.126867] NET: Registered protocol family 2
[ 0.127001] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.127627] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.129557] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.130687] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.130691] TCP reno registered
[ 0.130845] NET: Registered protocol family 1
[ 0.130872] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.130938] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.130947] pci 0000:01:00.0: Boot video device
[ 0.131032] Unpacking initramfs...
[ 0.428570] Freeing initrd memory: 8417k freed
[ 0.442488] audit: initializing netlink socket (disabled)
[ 0.442511] type=2000 audit(1275268014.441:1): initialized
[ 0.442830] highmem bounce pool size: 64 pages
[ 0.442839] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.444861] VFS: Disk quotas dquot_6.5.2
[ 0.444944] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.445060] msgmni has been set to 1723
[ 0.445375] alg: No test for stdrng (krng)
[ 0.445413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.445418] io scheduler noop registered
[ 0.445422] io scheduler anticipatory registered
[ 0.445425] io scheduler deadline registered
[ 0.445470] io scheduler cfq registered (default)
[ 0.445684] isapnp: Scanning for PnP cards...
[ 0.799033] isapnp: No Plug & Play device found
[ 0.800956] Linux agpgart interface v0.103
[ 0.801095] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 0.809177] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 0.809211] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.809671] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.809675] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.809823] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.809947] mice: PS/2 mouse device common for all mice
[ 0.810007] rtc_cmos 00:03: RTC can wake from S4
[ 0.810070] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.810117] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.810132] cpuidle: using governor ladder
[ 0.810136] cpuidle: using governor menu
[ 0.810143] No iBFT detected.
[ 0.810700] TCP cubic registered
[ 0.810904] NET: Registered protocol family 10
[ 0.811544] lo: Disabled Privacy Extensions
[ 0.812019] Mobile IPv6
[ 0.812023] NET: Registered protocol family 17
[ 0.812045] Using IPI No-Shortcut mode
[ 0.812134] PM: Resume from disk failed.
[ 0.812145] registered taskstats version 1
[ 0.812416] rtc_cmos 00:03: setting system clock to 2010-05-31 01:06:55 UTC (1275268015)
[ 0.812453] Initalizing network drop monitor service
[ 0.812490] Freeing unused kernel memory: 376k freed
[ 0.813048] Write protecting the kernel text: 2492k
[ 0.813075] Write protecting the kernel read-only data: 916k
[ 0.835479] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.836646] udev: starting version 154
[ 1.018288] megaraid_mm: Unknown symbol _spin_unlock_irqrestore
[ 1.023677] scsi_mod: Unknown symbol _spin_unlock_irqrestore
[ 1.027320] skge 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.027335] skge 0000:00:05.0: PCI: Disallowing DAC for device
[ 1.027373] skge 1.13 addr 0xdffec000 irq 16 chip Yukon-Lite rev 9
[ 1.028358] skge eth0: addr 00:19:5b:86:3e:fb
[ 1.087115] usbcore: registered new interface driver usbfs
[ 1.087323] usbcore: registered new interface driver hub
[ 1.087548] usbcore: registered new device driver usb
[ 1.095435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.095494] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.095519] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.095553] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.095638] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffe7e00
[ 1.101496] SCSI subsystem initialized
[ 1.130962] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.131019] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.131023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.131028] usb usb1: Product: EHCI Host Controller
[ 1.131031] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.131034] usb usb1: SerialNumber: 0000:00:10.4
[ 1.131264] usb usb1: configuration #1 chosen from 1 choice
[ 1.131358] hub 1-0:1.0: USB hub found
[ 1.131378] hub 1-0:1.0: 2 ports detected
[ 1.135430] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.135523] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.135536] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.135556] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.135588] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000
[ 1.135659] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.135663] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.135668] usb usb2: Product: UHCI Host Controller
[ 1.135671] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.135674] usb usb2: SerialNumber: 0000:00:10.0
[ 1.135865] usb usb2: configuration #1 chosen from 1 choice
[ 1.135958] hub 2-0:1.0: USB hub found
[ 1.135975] hub 2-0:1.0: 2 ports detected
[ 1.137009] libata version 3.00 loaded.
[ 1.142173] pata_via 0000:00:0f.1: version 0.3.4
[ 1.142210] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.145202] scsi0 : pata_via
[ 1.145504] scsi1 : pata_via
[ 1.147555] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.147560] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.368551] ata1.00: ATA-6: ST3160021A, 8.01, max UDMA/100
[ 1.368557] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.384405] ata1.00: configured for UDMA/100
[ 1.384575] scsi 0:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
[ 1.564919] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.564996] sd 0:0:0:0: [sda] Write Protect is off
[ 1.565002] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.565035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.565224] sda: sda1 sda2
[ 1.586549] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.128021] floppy0: no floppy controllers found
[ 4.188314] md: linear personality registered for level -1
[ 4.192668] md: multipath personality registered for level -4
[ 4.196368] md: raid0 personality registered for level 0
[ 4.202651] md: raid1 personality registered for level 1
[ 4.206019] async_tx: api initialized (async)
[ 4.207401] xor: automatically using best checksumming function: pIII_sse
[ 4.224006] pIII_sse : 3019.000 MB/sec
[ 4.224010] xor: using function: pIII_sse (3019.000 MB/sec)
[ 4.292008] raid6: int32x1 694 MB/s
[ 4.360044] raid6: int32x2 714 MB/s
[ 4.428021] raid6: int32x4 587 MB/s
[ 4.496099] raid6: int32x8 535 MB/s
[ 4.564039] raid6: mmxx1 1384 MB/s
[ 4.632020] raid6: mmxx2 2366 MB/s
[ 4.700041] raid6: sse1x1 1251 MB/s
[ 4.768035] raid6: sse1x2 2035 MB/s
[ 4.768038] raid6: using algorithm sse1x2 (2035 MB/s)
[ 4.777866] md: raid6 personality registered for level 6
[ 4.777871] md: raid5 personality registered for level 5
[ 4.777874] md: raid4 personality registered for level 4
[ 4.788342] md: raid10 personality registered for level 10
[ 4.841838] PM: Starting manual resume from disk
[ 4.841846] PM: Resume from partition 8:1
[ 4.841849] PM: Checking hibernation image.
[ 4.842121] PM: Error -22 checking image file
[ 4.842124] PM: Resume from disk failed.
[ 4.894116] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.894121] EXT3-fs: write access will be enabled during recovery.
[ 5.299011] kjournald starting. Commit interval 5 seconds
[ 5.299032] EXT3-fs: recovery complete.
[ 5.299728] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.077683] udev: starting version 154
[ 7.571234] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 7.571247] ACPI: Power Button [PWRB]
[ 7.571810] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 7.571823] ACPI: Sleep Button [SLPB]
[ 7.571968] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.571975] ACPI: Power Button [PWRF]
[ 7.975727] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.228482] processor LNXCPU:00: registered as cooling_device0
[ 8.232644] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.239414] sata_via 0000:00:0f.0: version 2.4
[ 8.239444] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 8.239515] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 8.239640] scsi2 : sata_via
[ 8.239889] scsi3 : sata_via
[ 8.239954] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 20
[ 8.239959] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 20
[ 8.247809] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 8.444019] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.022675] ata3.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133
[ 9.022682] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 9.028387] ata3.00: configured for UDMA/133
[ 9.028549] scsi 2:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5
[ 9.029046] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.029120] sd 2:0:0:0: [sdb] Write Protect is off
[ 9.029125] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 9.029157] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.029351] sdb:
[ 9.064641] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[ 9.064690] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[ 9.096768] [LDM] sdb1
[ 9.097761] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 9.232012] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.800431] ata4.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133
[ 9.800438] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 9.808686] ata4.00: configured for UDMA/133
[ 9.808854] scsi 3:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5
[ 9.809380] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.809454] sd 3:0:0:0: [sdc] Write Protect is off
[ 9.809459] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 9.809490] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.809673] sdc:
[ 9.865173] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[ 9.865221] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[ 9.897442] [LDM] sdc1
[ 9.898380] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 9.921558] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 9.921592] megaraid: probe new device 0x101e:0x1960:0x101e:0x0511: bus 0:slot 8:func 0
[ 9.921624] megaraid 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.944152] megaraid: fw version:[N661] bios version:[1.01]
[ 9.981240] [drm] Initialized drm 1.1.0 20060810
[ 10.008082] megaraid 0000:00:08.0: PCI: Disallowing DAC for device
[ 10.008088] megaraid: DMA mask for 64-bit failed
[ 10.009743] scsi4 : LSI Logic MegaRAID driver
[ 10.010458] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
[ 10.010505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.012292] scsi[4]: scanning scsi channel 0 [Phy 0] for non-raid devices
[ 10.065048] scsi[4]: scanning scsi channel 1 [Phy 1] for non-raid devices
[ 10.070967] scsi[4]: scanning scsi channel 2 [Phy 2] for non-raid devices
[ 10.104321] [drm] radeon defaulting to userspace modesetting.
[ 10.104459] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.104775] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0 on minor 0
[ 10.153993] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.176975] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.596027] floppy0: no floppy controllers found
[ 12.160193] scsi[4]: scanning scsi channel 3 [Phy 3] for non-raid devices
[ 12.164756] scsi[4]: scanning scsi channel 4 [virtual] for logical drives
[ 12.165285] scsi 4:4:0:0: Direct-Access MegaRAID LD 0 RAID0 915G N661 PQ: 0 ANSI: 2
[ 12.176617] sd 4:4:0:0: [sdd] 1875419136 512-byte logical blocks: (960 GB/894 GiB)
[ 12.176676] sd 4:4:0:0: [sdd] Write Protect is off
[ 12.176681] sd 4:4:0:0: [sdd] Mode Sense: 00 00 00 00
[ 12.176697] sd 4:4:0:0: [sdd] Asking for cache data failed
[ 12.176740] sd 4:4:0:0: [sdd] Assuming drive cache: write through
[ 12.177083] sd 4:4:0:0: [sdd] Asking for cache data failed
[ 12.177121] sd 4:4:0:0: [sdd] Assuming drive cache: write through
[ 12.177159] sdd: unknown partition table
[ 12.204360] sd 4:4:0:0: [sdd] Asking for cache data failed
[ 12.204404] sd 4:4:0:0: [sdd] Assuming drive cache: write through
[ 12.204443] sd 4:4:0:0: [sdd] Attached SCSI disk
[ 13.620026] floppy0: no floppy controllers found
[ 14.563861] Adding 3903752k swap on /dev/sda1. Priority:-1 extents:1 across:3903752k
[ 14.810075] EXT3 FS on sda2, internal journal
[ 14.932890] loop: module loaded
[ 14.980251] w83627hf: Found W83697HF chip at 0x290
[ 15.834439] skge eth0: enabling interface
[ 15.838355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.181378] skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 18.181698] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.692008] eth0: no IPv6 routers present
[ 81.956215] md: nonpersistent superblock ...
[ 81.956223] md: bind<sdc1>
[ 81.956264] md: nonpersistent superblock ...
[ 81.956269] md: bind<sdb1>
[ 81.958303] raid0: looking at sdb1
[ 81.958309] raid0: comparing sdb1(3907024896)
[ 81.958312] with sdb1(3907024896)
[ 81.958315] raid0: END
[ 81.958316] raid0: ==> UNIQUE
[ 81.958319] raid0: 1 zones
[ 81.958321] raid0: looking at sdc1
[ 81.958324] raid0: comparing sdc1(3907024896)
[ 81.958328] with sdb1(3907024896)
[ 81.958330] raid0: EQUAL
[ 81.958332] raid0: FINAL 1 zones
[ 81.958338] raid0: done.
[ 81.958341] raid0 : md_size is 7814049792 sectors.
[ 81.958344] ******* md0 configuration *********
[ 81.958347] zone0=[sdc1/sdb1/]
[ 81.958352] zone offset=0kb device offset=0kb size=3907024896kb
[ 81.958355] **********************************
[ 81.958357]
[ 81.958375] md0: detected capacity change from 0 to 4000793493504
[ 81.962566] md0: AHDI p2 p3
[ 356.426600] BUG: unable to handle kernel paging request at 1a401a54
[ 356.426757] IP: [<c108795d>] find_get_page+0x40/0x81
[ 356.426864] *pde = 00000000
[ 356.426964] Oops: 0000 [#1] SMP
[ 356.427061] last sysfs file: /sys/devices/virtual/block/md0/removable
[ 356.427107] Modules linked in: w83627hf hwmon_vid loop snd_pcsp snd_pcm radeon snd_timer ttm snd drm_kms_helper drm i2c_viapro soundcore megaraid_mbox i2c_algo_bit megaraid_mm snd_page_alloc i2c_core sata_via shpchp processor pci_hotplug tpm_tis tpm tpm_bios evdev button ext3 jbd mbcache raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 multipath linear md_mod sd_mod crc_t10dif ata_generic pata_via uhci_hcd libata thermal ehci_hcd scsi_mod thermal_sys usbcore nls_base skge [last unloaded: scsi_wait_scan]
[ 356.428019]
[ 356.428019] Pid: 1229, comm: mkfs.ext4 Not tainted (2.6.32-5-686 #1) MS-6590
[ 356.428019] EIP: 0060:[<c108795d>] EFLAGS: 00010203 CPU: 0
[ 356.428019] EIP is at find_get_page+0x40/0x81
[ 356.428019] EAX: 1a401a4f EBX: 00000000 ECX: 1a401a50 EDX: 00000000
[ 356.428019] ESI: dfe7bccc EDI: 1a401a54 EBP: f69a5308 ESP: f641bd5c
[ 356.428019] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 356.428019] Process mkfs.ext4 (pid: 1229, ti=f641a000 task=f6fcd980 task.ti=f641a000)
[ 356.428019] Stack:
[ 356.428019] 1a401a50 00000000 c15fcda0 1af01341 f69a530c 00000000 f69a5308 1af01341
[ 356.428019] <0> f69a5308 c1087c6a 00000000 f69a5308 ffffffff c1087ec6 000000d0 1af01341
[ 356.428019] <0> c15fcda0 00000000 f69a5308 f69a5258 000001af c10cef9a 00000000 00001000
[ 356.428019] Call Trace:
[ 356.428019] [<c1087c6a>] ? find_lock_page+0x10/0x36
[ 356.428019] [<c1087ec6>] ? grab_cache_page_write_begin+0x30/0x88
[ 356.428019] [<c10cef9a>] ? block_write_begin+0x2b/0xc6
[ 356.428019] [<c10d21a1>] ? blkdev_write_begin+0x29/0x2d
[ 356.428019] [<c10d14c8>] ? blkdev_get_block+0x0/0xb8
[ 356.428019] [<c10886fa>] ? generic_file_buffered_write+0xd0/0x21d
[ 356.428019] [<c1088c44>] ? __generic_file_aio_write+0x265/0x28d
[ 356.428019] [<c1047c3a>] ? atomic_notifier_call_chain+0xc/0xf
[ 356.428019] [<c119e7b5>] ? do_con_write+0x1993/0x19cd
[ 356.428019] [<c10d1996>] ? blkdev_aio_write+0x2f/0x69
[ 356.428019] [<c10b312e>] ? do_sync_write+0xc0/0x107
[ 356.428019] [<c1047af6>] ? up+0x9/0x2a
[ 356.428019] [<c10445ce>] ? autoremove_wake_function+0x0/0x2d
[ 356.428019] [<c126d514>] ? mutex_lock+0xb/0x24
[ 356.428019] [<c110263c>] ? security_file_permission+0xc/0xd
[ 356.428019] [<c10b306e>] ? do_sync_write+0x0/0x107
[ 356.428019] [<c10b3a5a>] ? vfs_write+0x7e/0xd6
[ 356.428019] [<c10b3b4a>] ? sys_write+0x3c/0x63
[ 356.428019] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[ 356.428019] Code: 0c 8b 44 24 10 e8 74 01 0b 00 85 c0 89 c6 74 44 8b 08 b8 ff ff ff ff f6 c1 01 0f 45 c8 8d 41 ff 83 f8 fd 89 0c 24 77 d5 8d 79 04 <8b> 59 04 89 7c 24 04 85 db 74 c7 8d 6b 01 89 d8 8b 7c 24 04 3e
[ 356.428019] EIP: [<c108795d>] find_get_page+0x40/0x81 SS:ESP 0068:f641bd5c
[ 356.428019] CR2: 000000001a401a54
[ 356.433563] ---[ end trace 2999fa4b920534ab ]---
[ 358.528064] BUG: unable to handle kernel paging request at c1137ddb
[ 358.528177] IP: [<c10ce734>] lock_buffer+0x8/0x1d
[ 358.528260] *pde = 36f18063 *pte = 01137161
[ 358.528357] Oops: 0003 [#2] SMP
[ 358.528451] last sysfs file: /sys/devices/virtual/block/md0/removable
[ 358.528496] Modules linked in: w83627hf hwmon_vid loop snd_pcsp snd_pcm radeon snd_timer ttm snd drm_kms_helper drm i2c_viapro soundcore megaraid_mbox i2c_algo_bit megaraid_mm snd_page_alloc i2c_core sata_via shpchp processor pci_hotplug tpm_tis tpm tpm_bios evdev button ext3 jbd mbcache raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 multipath linear md_mod sd_mod crc_t10dif ata_generic pata_via uhci_hcd libata thermal ehci_hcd scsi_mod thermal_sys usbcore nls_base skge [last unloaded: scsi_wait_scan]
[ 358.530267]
[ 358.530308] Pid: 1229, comm: mkfs.ext4 Tainted: G D (2.6.32-5-686 #1) MS-6590
[ 358.530360] EIP: 0060:[<c10ce734>] EFLAGS: 00010246 CPU: 0
[ 358.530404] EIP is at lock_buffer+0x8/0x1d
[ 358.530445] EAX: 00000000 EBX: c1137ddb ECX: 00000002 EDX: f641a000
[ 358.530490] ESI: c1b89e20 EDI: dfe7bcc0 EBP: 0f001001 ESP: f641bafc
[ 358.530534] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 358.530579] Process mkfs.ext4 (pid: 1229, ti=f641a000 task=f6fcd980 task.ti=f641a000)
[ 358.530630] Stack:
[ 358.530667] c1137ddb c10cfea4 00000000 00010888 c10cfe6a f69a5308 0000000d 1a401a50
[ 358.530905] <0> c108e746 c1b89e20 c108eb6b c1b89e20 1a401a50 c108ec3d 0000000e c10884b2
[ 358.531203] <0> 00000000 00000000 f69a5308 00000000 ffffffff 0000000e 00000000 c1b8b700
[ 358.531532] Call Trace:
[ 358.531582] [<c1137ddb>] ? radix_tree_node_rcu_free+0x0/0x37
[ 358.531628] [<c10cfea4>] ? block_invalidatepage+0x3a/0x8b
[ 358.531673] [<c10cfe6a>] ? block_invalidatepage+0x0/0x8b
[ 358.531720] [<c108e746>] ? do_invalidatepage+0x16/0x18
[ 358.531764] [<c108eb6b>] ? truncate_inode_page+0x47/0x80
[ 358.531808] [<c108ec3d>] ? truncate_inode_pages_range+0x99/0x23f
[ 358.531857] [<c10884b2>] ? wait_on_page_writeback_range+0x9f/0xdf
[ 358.531904] [<c108edec>] ? truncate_inode_pages+0x9/0xc
[ 358.531948] [<c10d237b>] ? __blkdev_put+0x61/0x10f
[ 358.531995] [<c10b420b>] ? __fput+0xd5/0x170
[ 358.532002] [<c10b18e0>] ? filp_close+0x4e/0x54
[ 358.532002] [<c1032530>] ? put_files_struct+0x60/0xa6
[ 358.532002] [<c1033b8b>] ? do_exit+0x1d4/0x5c6
[ 358.532002] [<c126c3e6>] ? printk+0xe/0x18
[ 358.532002] [<c100609d>] ? oops_end+0x98/0x9d
[ 358.532002] [<c101c0bf>] ? no_context+0x105/0x10e
[ 358.532002] [<c101c1dd>] ? __bad_area_nosemaphore+0x115/0x11d
[ 358.532002] [<c102bd85>] ? finish_task_switch+0x34/0x8e
[ 358.532002] [<c126ccde>] ? schedule+0x78f/0x7dc
[ 358.532002] [<c102db97>] ? try_to_wake_up+0x25d/0x269
[ 358.532002] [<c108be2c>] ? get_page_from_freelist+0xc0/0x3c7
[ 358.532002] [<c101c49e>] ? do_page_fault+0x13f/0x287
[ 358.532002] [<c101c21e>] ? bad_area+0x2d/0x32
[ 358.532002] [<c101c35f>] ? do_page_fault+0x0/0x287
[ 358.532002] [<c126e023>] ? error_code+0x73/0x78
[ 358.532002] [<c108795d>] ? find_get_page+0x40/0x81
[ 358.532002] [<c1087c6a>] ? find_lock_page+0x10/0x36
[ 358.532002] [<c1087ec6>] ? grab_cache_page_write_begin+0x30/0x88
[ 358.532002] [<c10cef9a>] ? block_write_begin+0x2b/0xc6
[ 358.532002] [<c10d21a1>] ? blkdev_write_begin+0x29/0x2d
[ 358.532002] [<c10d14c8>] ? blkdev_get_block+0x0/0xb8
[ 358.532002] [<c10886fa>] ? generic_file_buffered_write+0xd0/0x21d
[ 358.532002] [<c1088c44>] ? __generic_file_aio_write+0x265/0x28d
[ 358.532002] [<c1047c3a>] ? atomic_notifier_call_chain+0xc/0xf
[ 358.532002] [<c119e7b5>] ? do_con_write+0x1993/0x19cd
[ 358.532002] [<c10d1996>] ? blkdev_aio_write+0x2f/0x69
[ 358.532002] [<c10b312e>] ? do_sync_write+0xc0/0x107
[ 358.532002] [<c1047af6>] ? up+0x9/0x2a
[ 358.532002] [<c10445ce>] ? autoremove_wake_function+0x0/0x2d
[ 358.532002] [<c126d514>] ? mutex_lock+0xb/0x24
[ 358.532002] [<c110263c>] ? security_file_permission+0xc/0xd
[ 358.532002] [<c10b306e>] ? do_sync_write+0x0/0x107
[ 358.532002] [<c10b3a5a>] ? vfs_write+0x7e/0xd6
[ 358.532002] [<c10b3b4a>] ? sys_write+0x3c/0x63
[ 358.532002] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[ 358.532002] Code: 89 c3 3e 0f ba 28 02 19 c0 85 c0 74 14 b9 e0 e3 0c c1 ba 02 00 00 00 6a 02 89 d8 e8 f8 e9 19 00 59 5b c3 53 89 c3 e8 e6 e6 19 00 <3e> 0f ba 2b 02 19 c0 85 c0 74 08 89 d8 5b e9 c1 ff ff ff 5b c3
[ 358.532002] EIP: [<c10ce734>] lock_buffer+0x8/0x1d SS:ESP 0068:f641bafc
[ 358.532002] CR2: 00000000c1137ddb
[ 358.532002] ---[ end trace 2999fa4b920534ac ]---
[ 358.532002] Fixing recursive fault but reboot is needed!
--
Thomas Fjellstrom
tfjellstrom@strangesoft.net
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2010-05-25 14:31 ` Borislav Petkov
@ 2010-05-25 14:54 ` Markus
0 siblings, 0 replies; 17+ messages in thread
From: Markus @ 2010-05-25 14:54 UTC (permalink / raw)
To: linux-kernel; +Cc: Borislav Petkov
Hi.
I already thought "swapper" to be unrelated to "swap", but who knows.
The linked article is pretty old, isnt it? I used mdadm to create the
raid1 and "echo check > /sys/block/mdX/md/sync_action" to regulary start
the check.
Its exactly the same kernel as before (the one crashing); Still the
gentoo-kernel (vanilla+fbcondecor).
I will send a mail if anything happens.
Thanks for your time,
Markus
> From: Markus <M4rkusXXL@web.de>
> Date: Tue, May 25, 2010 at 03:09:39PM +0200
>
> > Had disabled swap (saw the string "swapper" and "page_fault"...)
> > and now the problem does not show up anymore.
>
> No, swapper is the idle task and I don't think it has anything to do
> with the oops - it simply happens to be the currently running process
> when the oops happens. And the kernel should be handling swapless
> configurations just fine for the cost of slowing down when RAM is
> depleted or OOM killing a memory hog.
>
> > Dont know, if its now "fixed", but is it possible that raid1 and
> > swap on top does not really work? Normal system usage
> > (auto-detected raid1, add swap by fstab, regularly running a check
> > and perhaps a resync).
>
> Enabling swap on raid1 might need a bit more work, see here:
> http://www.linuxjournal.com/article/5898
>
> Anyways, let me know what happens and especially if it appears again.
> Now you say it doesn't happen anymore but le me ask: is this still
> the gentoo kernel or is it a vanilla one?
>
> Thanks.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2010-05-25 13:09 ` Markus
@ 2010-05-25 14:31 ` Borislav Petkov
2010-05-25 14:54 ` Markus
0 siblings, 1 reply; 17+ messages in thread
From: Borislav Petkov @ 2010-05-25 14:31 UTC (permalink / raw)
To: Markus; +Cc: linux-kernel, Borislav Petkov
From: Markus <M4rkusXXL@web.de>
Date: Tue, May 25, 2010 at 03:09:39PM +0200
> Had disabled swap (saw the string "swapper" and "page_fault"...) and
> now the problem does not show up anymore.
No, swapper is the idle task and I don't think it has anything to do
with the oops - it simply happens to be the currently running process
when the oops happens. And the kernel should be handling swapless
configurations just fine for the cost of slowing down when RAM is
depleted or OOM killing a memory hog.
> Dont know, if its now "fixed", but is it possible that raid1 and swap
> on top does not really work? Normal system usage (auto-detected raid1,
> add swap by fstab, regularly running a check and perhaps a resync).
Enabling swap on raid1 might need a bit more work, see here:
http://www.linuxjournal.com/article/5898
Anyways, let me know what happens and especially if it appears again.
Now you say it doesn't happen anymore but le me ask: is this still the
gentoo kernel or is it a vanilla one?
Thanks.
--
Regards/Gruss,
Boris.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2010-05-23 21:17 ` Borislav Petkov
2010-05-23 21:48 ` Markus
2010-05-24 11:44 ` Markus
@ 2010-05-25 13:09 ` Markus
2010-05-25 14:31 ` Borislav Petkov
2 siblings, 1 reply; 17+ messages in thread
From: Markus @ 2010-05-25 13:09 UTC (permalink / raw)
To: linux-kernel; +Cc: Borislav Petkov
Hi!
Had disabled swap (saw the string "swapper" and "page_fault"...) and now
the problem does not show up anymore. Dont know, if its now "fixed", but
is it possible that raid1 and swap on top does not really work? Normal
system usage (auto-detected raid1, add swap by fstab, regularly running
a check and perhaps a resync).
Thanks,
Markus
> From: Markus <M4rkusXXL@web.de>
> Date: Sun, May 23, 2010 at 10:44:41PM +0200
>
> > It is 0000000001912178.
> > http://img256.imageshack.us/img256/4370/shotn.gif
>
> True story, the fact that this value is not what it is expected to be
> judging from the code it happens might actually be a clue:
>
> [64112.502507] Code: 8b bf b0 00 00 00 31 ed 48 8d 50 f0 48 85 c0 48
> 0f 45 ea 48 85 ff 74 10 48 89 ee e8 8d d3 ff ff 85 c0 0f 8e c5 00 00
> 00 48 89 eb <49> 8b bd b8 00 00 00 48 85 ff 74 10 48 89 ee e8 6e d3
> ff ff 85 All code
> ========
> 0: 8b bf b0 00 00 00 mov 0xb0(%rdi),%edi
> 6: 31 ed xor %ebp,%ebp
> 8: 48 8d 50 f0 lea -0x10(%rax),%rdx
> c: 48 85 c0 test %rax,%rax
> f: 48 0f 45 ea cmovne %rdx,%rbp
> 13: 48 85 ff test %rdi,%rdi
> 16: 74 10 je 0x28
> 18: 48 89 ee mov %rbp,%rsi
> 1b: e8 8d d3 ff ff callq 0xffffffffffffd3ad
> 20: 85 c0 test %eax,%eax
> 22: 0f 8e c5 00 00 00 jle 0xed
> 28: 48 89 eb mov %rbp,%rbx
> 2b:* 49 8b bd b8 00 00 00 mov 0xb8(%r13),%rdi <--
> trapping instruction 32: 48 85 ff test %rdi,%rdi
> 35: 74 10 je 0x47
> 37: 48 89 ee mov %rbp,%rsi
> 3a: e8 6e d3 ff ff callq 0xffffffffffffd3ad
> 3f: 85 .byte 0x85
>
> Code starting with the faulting instruction
> ===========================================
> 0: 49 8b bd b8 00 00 00 mov 0xb8(%r13),%rdi
> 7: 48 85 ff test %rdi,%rdi
> a: 74 10 je 0x1c
> c: 48 89 ee mov %rbp,%rsi
> f: e8 6e d3 ff ff callq 0xffffffffffffd382
> 14: 85 .byte 0x85
>
>
> and %r13 contains 00000000019129c0 in the register snapshot. Hmm...
>
> > Serial console is no option, but this "netconsole"-thing looks
> > promising. I'll set that up and try to catch the next one with
> > this.
>
> That'll help. Also let me make sure: Is this a vanilla kernel or are
> there any distribution patches on top of it? I see it says
> 2.6.34-gentoo but just in case. If it is not a vanilla kernel please
> try a vanilla one from kernel.org.
>
> Also, please send the whole dmesg of the system, there might be
> something suspicious there and also the output of 'cat /proc/cpuinfo'
> and 'dmidecode', the last one run as root.
>
> Thanks.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2010-05-23 21:17 ` Borislav Petkov
2010-05-23 21:48 ` Markus
@ 2010-05-24 11:44 ` Markus
2010-05-25 13:09 ` Markus
2 siblings, 0 replies; 17+ messages in thread
From: Markus @ 2010-05-24 11:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Borislav Petkov
[-- Attachment #1: Type: Text/Plain, Size: 2621 bytes --]
Forgot cpuinfo yesterday, sorry!
Markus
> From: Markus <M4rkusXXL@web.de>
> Date: Sun, May 23, 2010 at 10:44:41PM +0200
>
> > It is 0000000001912178.
> > http://img256.imageshack.us/img256/4370/shotn.gif
>
> True story, the fact that this value is not what it is expected to be
> judging from the code it happens might actually be a clue:
>
> [64112.502507] Code: 8b bf b0 00 00 00 31 ed 48 8d 50 f0 48 85 c0 48
> 0f 45 ea 48 85 ff 74 10 48 89 ee e8 8d d3 ff ff 85 c0 0f 8e c5 00 00
> 00 48 89 eb <49> 8b bd b8 00 00 00 48 85 ff 74 10 48 89 ee e8 6e d3
> ff ff 85 All code
> ========
> 0: 8b bf b0 00 00 00 mov 0xb0(%rdi),%edi
> 6: 31 ed xor %ebp,%ebp
> 8: 48 8d 50 f0 lea -0x10(%rax),%rdx
> c: 48 85 c0 test %rax,%rax
> f: 48 0f 45 ea cmovne %rdx,%rbp
> 13: 48 85 ff test %rdi,%rdi
> 16: 74 10 je 0x28
> 18: 48 89 ee mov %rbp,%rsi
> 1b: e8 8d d3 ff ff callq 0xffffffffffffd3ad
> 20: 85 c0 test %eax,%eax
> 22: 0f 8e c5 00 00 00 jle 0xed
> 28: 48 89 eb mov %rbp,%rbx
> 2b:* 49 8b bd b8 00 00 00 mov 0xb8(%r13),%rdi <--
> trapping instruction 32: 48 85 ff test %rdi,%rdi
> 35: 74 10 je 0x47
> 37: 48 89 ee mov %rbp,%rsi
> 3a: e8 6e d3 ff ff callq 0xffffffffffffd3ad
> 3f: 85 .byte 0x85
>
> Code starting with the faulting instruction
> ===========================================
> 0: 49 8b bd b8 00 00 00 mov 0xb8(%r13),%rdi
> 7: 48 85 ff test %rdi,%rdi
> a: 74 10 je 0x1c
> c: 48 89 ee mov %rbp,%rsi
> f: e8 6e d3 ff ff callq 0xffffffffffffd382
> 14: 85 .byte 0x85
>
>
> and %r13 contains 00000000019129c0 in the register snapshot. Hmm...
>
> > Serial console is no option, but this "netconsole"-thing looks
> > promising. I'll set that up and try to catch the next one with
> > this.
>
> That'll help. Also let me make sure: Is this a vanilla kernel or are
> there any distribution patches on top of it? I see it says
> 2.6.34-gentoo but just in case. If it is not a vanilla kernel please
> try a vanilla one from kernel.org.
>
> Also, please send the whole dmesg of the system, there might be
> something suspicious there and also the output of 'cat /proc/cpuinfo'
> and 'dmidecode', the last one run as root.
>
> Thanks.
[-- Attachment #2: cpuinfo.log --]
[-- Type: text/x-log, Size: 3456 bytes --]
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 955 Processor
stepping : 2
cpu MHz : 3200.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 6400.59
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 955 Processor
stepping : 2
cpu MHz : 3200.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 6400.03
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 955 Processor
stepping : 2
cpu MHz : 3200.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 6400.02
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 955 Processor
stepping : 2
cpu MHz : 3200.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 6400.02
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2010-05-23 21:17 ` Borislav Petkov
@ 2010-05-23 21:48 ` Markus
2010-05-24 11:44 ` Markus
2010-05-25 13:09 ` Markus
2 siblings, 0 replies; 17+ messages in thread
From: Markus @ 2010-05-23 21:48 UTC (permalink / raw)
To: linux-kernel; +Cc: Borislav Petkov
[-- Attachment #1: Type: Text/Plain, Size: 2892 bytes --]
Hi!
Yes, this is a gentoo kernel[1]. Its vanilla kernel plus only
fbcondecor-patch, but I will have to reboot for netconsole, so I will
build the vanilla one.
I can resend the logs and the oops, when it happens again with vanilla.
Thanks,
Markus
[1] http://dev.gentoo.org/~mpagano/genpatches/trunk/2.6.34/
> From: Markus <M4rkusXXL@web.de>
> Date: Sun, May 23, 2010 at 10:44:41PM +0200
>
> > It is 0000000001912178.
> > http://img256.imageshack.us/img256/4370/shotn.gif
>
> True story, the fact that this value is not what it is expected to be
> judging from the code it happens might actually be a clue:
>
> [64112.502507] Code: 8b bf b0 00 00 00 31 ed 48 8d 50 f0 48 85 c0 48
> 0f 45 ea 48 85 ff 74 10 48 89 ee e8 8d d3 ff ff 85 c0 0f 8e c5 00 00
> 00 48 89 eb <49> 8b bd b8 00 00 00 48 85 ff 74 10 48 89 ee e8 6e d3
> ff ff 85 All code
> ========
> 0: 8b bf b0 00 00 00 mov 0xb0(%rdi),%edi
> 6: 31 ed xor %ebp,%ebp
> 8: 48 8d 50 f0 lea -0x10(%rax),%rdx
> c: 48 85 c0 test %rax,%rax
> f: 48 0f 45 ea cmovne %rdx,%rbp
> 13: 48 85 ff test %rdi,%rdi
> 16: 74 10 je 0x28
> 18: 48 89 ee mov %rbp,%rsi
> 1b: e8 8d d3 ff ff callq 0xffffffffffffd3ad
> 20: 85 c0 test %eax,%eax
> 22: 0f 8e c5 00 00 00 jle 0xed
> 28: 48 89 eb mov %rbp,%rbx
> 2b:* 49 8b bd b8 00 00 00 mov 0xb8(%r13),%rdi <--
> trapping instruction 32: 48 85 ff test %rdi,%rdi
> 35: 74 10 je 0x47
> 37: 48 89 ee mov %rbp,%rsi
> 3a: e8 6e d3 ff ff callq 0xffffffffffffd3ad
> 3f: 85 .byte 0x85
>
> Code starting with the faulting instruction
> ===========================================
> 0: 49 8b bd b8 00 00 00 mov 0xb8(%r13),%rdi
> 7: 48 85 ff test %rdi,%rdi
> a: 74 10 je 0x1c
> c: 48 89 ee mov %rbp,%rsi
> f: e8 6e d3 ff ff callq 0xffffffffffffd382
> 14: 85 .byte 0x85
>
>
> and %r13 contains 00000000019129c0 in the register snapshot. Hmm...
>
> > Serial console is no option, but this "netconsole"-thing looks
> > promising. I'll set that up and try to catch the next one with
> > this.
>
> That'll help. Also let me make sure: Is this a vanilla kernel or are
> there any distribution patches on top of it? I see it says
> 2.6.34-gentoo but just in case. If it is not a vanilla kernel please
> try a vanilla one from kernel.org.
>
> Also, please send the whole dmesg of the system, there might be
> something suspicious there and also the output of 'cat /proc/cpuinfo'
> and 'dmidecode', the last one run as root.
>
> Thanks.
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 56763 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo (root@XXX) (gcc version 4.3.4 (Gentoo 4.3.4 p1.1, pie-10.1.5) ) #1 SMP Sat May 22 14:56:22 CEST 2010
[ 0.000000] Command line: root=/dev/md2 vga=0x346 video=vesafb:ywarp,1680x1050-32@60
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfec0000 - 00000000dfef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000220000000 aka 8704M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ 14000-16000
[ 0.000000] ACPI: RSDP 00000000000fad70 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dfeb0000 00040 (v01 033110 RSDT2200 20100331 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dfeb0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20100121/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000dfeb0450 08FCB (v01 AS204 AS20417F 0000017F INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dfec0000 00040
[ 0.000000] ACPI: APIC 00000000dfeb0390 0007C (v01 033110 APIC2200 20100331 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dfeb0410 0003C (v01 033110 OEMMCFG 20100331 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dfec0040 00072 (v01 033110 OEMB2200 20100331 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000dfeba450 00027 (v01 033110 OEMAAFT 20100331 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dfeba480 00038 (v01 033110 OEMHPET 20100331 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dfeba4c0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880002000000-ffff8800091fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] 6 Processors exceeds NR_CPUS limit of 4
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [15000 - 157ff]
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s76456 r8192 d21848 u524288
[ 0.000000] pcpu-alloc: s76456 r8192 d21848 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066239
[ 0.000000] Kernel command line: root=/dev/md2 vga=0x346 video=vesafb:ywarp,1680x1050-32@60
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] Subtract (53 early reservations)
[ 0.000000] #1 [0001000000 - 00017473e4] TEXT DATA BSS
[ 0.000000] #2 [0001748000 - 0001748133] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009f800 - 00000fca80] BIOS reserved
[ 0.000000] #6 [00000fcc14 - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000fca80 - 00000fcc14] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [0000014000 - 0000015000] PGTABLE
[ 0.000000] #11 [0001748140 - 0001749140] BOOTMEM
[ 0.000000] #12 [0001747400 - 0001747800] BOOTMEM
[ 0.000000] #13 [0001f4a000 - 0001f4b000] BOOTMEM
[ 0.000000] #14 [0001f4b000 - 0001f4c000] BOOTMEM
[ 0.000000] #15 [0002000000 - 0009200000] MEMMAP 0
[ 0.000000] #16 [0001747800 - 0001747980] BOOTMEM
[ 0.000000] #17 [0001749140 - 0001761140] BOOTMEM
[ 0.000000] #18 [0001761140 - 0001779140] BOOTMEM
[ 0.000000] #19 [000177a000 - 000177b000] BOOTMEM
[ 0.000000] #20 [0001747980 - 00017479c1] BOOTMEM
[ 0.000000] #21 [0001747a00 - 0001747a43] BOOTMEM
[ 0.000000] #22 [0001747a80 - 0001747cb0] BOOTMEM
[ 0.000000] #23 [0001747cc0 - 0001747d28] BOOTMEM
[ 0.000000] #24 [0001747d40 - 0001747da8] BOOTMEM
[ 0.000000] #25 [0001747dc0 - 0001747e28] BOOTMEM
[ 0.000000] #26 [0001747e40 - 0001747ea8] BOOTMEM
[ 0.000000] #27 [0001747ec0 - 0001747f28] BOOTMEM
[ 0.000000] #28 [0001747f40 - 0001747fa8] BOOTMEM
[ 0.000000] #29 [0001779140 - 00017791a8] BOOTMEM
[ 0.000000] #30 [00017791c0 - 0001779228] BOOTMEM
[ 0.000000] #31 [0001779240 - 00017792a8] BOOTMEM
[ 0.000000] #32 [0001747fc0 - 0001747ffb] BOOTMEM
[ 0.000000] #33 [00017792c0 - 00017792fb] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #36 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #37 [0001980000 - 000199a000] BOOTMEM
[ 0.000000] #38 [0001779300 - 0001779308] BOOTMEM
[ 0.000000] #39 [0001779340 - 0001779348] BOOTMEM
[ 0.000000] #40 [0001779380 - 0001779390] BOOTMEM
[ 0.000000] #41 [00017793c0 - 00017793e0] BOOTMEM
[ 0.000000] #42 [0001779400 - 0001779530] BOOTMEM
[ 0.000000] #43 [0001779540 - 0001779590] BOOTMEM
[ 0.000000] #44 [00017795c0 - 0001779610] BOOTMEM
[ 0.000000] #45 [000177b000 - 0001783000] BOOTMEM
[ 0.000000] #46 [0009200000 - 0009a00000] BOOTMEM
[ 0.000000] #47 [000199a000 - 0001d9a000] BOOTMEM
[ 0.000000] #48 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #49 [0009a00000 - 000da00000] BOOTMEM
[ 0.000000] #50 [0001783000 - 00017a3000] BOOTMEM
[ 0.000000] #51 [00017a3000 - 00017e3000] BOOTMEM
[ 0.000000] #52 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 8118160k/8912896k available (3273k kernel code, 526084k absent, 268652k reserved, 3215k data, 460k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:384
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3200.299 MHz processor.
[ 0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.59 BogoMIPS (lpj=32002950)
[ 0.020018] Security Framework initialized
[ 0.020026] Mount-cache hash table entries: 256
[ 0.020104] tseg: 0000000000
[ 0.020109] CPU: Physical Processor ID: 0
[ 0.020111] CPU: Processor Core ID: 0
[ 0.020113] mce: CPU supports 6 MCE banks
[ 0.020120] Performance Events: AMD PMU driver.
[ 0.020124] ... version: 0
[ 0.020125] ... bit width: 48
[ 0.020126] ... generic registers: 4
[ 0.020128] ... value mask: 0000ffffffffffff
[ 0.020130] ... max period: 00007fffffffffff
[ 0.020131] ... fixed-purpose events: 0
[ 0.020133] ... event mask: 000000000000000f
[ 0.020152] Freeing SMP alternatives: 28k freed
[ 0.020161] ACPI: Core revision 20100121
[ 0.038105] Setting APIC routing to flat
[ 0.038399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.138423] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.140000] Booting Node 0, Processors #1 #2 #3 Ok.
[ 0.640003] Brought up 4 CPUs
[ 0.640006] Total of 4 processors activated (25600.67 BogoMIPS).
[ 0.641831] xor: automatically using best checksumming function: generic_sse
[ 0.690001] generic_sse: 12560.000 MB/sec
[ 0.690003] xor: using function: generic_sse (12560.000 MB/sec)
[ 0.690022] NET: Registered protocol family 16
[ 0.690252] node 0 link 0: io port [1000, ffffff]
[ 0.690255] TOM: 00000000e0000000 aka 3584M
[ 0.690257] Fam 10h mmconf [e0000000, efffffff]
[ 0.690258] node 0 link 0: mmio [a0000, bffff]
[ 0.690260] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.690262] node 0 link 0: mmio [f0000000, fe6fffff]
[ 0.690263] node 0 link 0: mmio [fe700000, fe8fffff]
[ 0.690265] node 0 link 0: mmio [fe900000, ffefffff]
[ 0.690266] TOM2: 0000000220000000 aka 8704M
[ 0.690268] bus: [00, 07] on node 0 link 0
[ 0.690270] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.690272] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.690273] bus: 00 index 2 [mem 0xf0000000-0xffffffff]
[ 0.690274] bus: 00 index 3 [mem 0x220000000-0xfcffffffff]
[ 0.690281] ACPI: bus type pci registered
[ 0.690332] PCI: Using configuration type 1 for base access
[ 0.690334] PCI: Using configuration type 1 for extended access
[ 0.691853] bio: create slab <bio-0> at 0
[ 0.692409] ACPI: EC: Look up EC in DSDT
[ 0.693236] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.698617] ACPI: Interpreter enabled
[ 0.698619] ACPI: (supports S0 S5)
[ 0.698627] ACPI: Using IOAPIC for interrupt routing
[ 0.703482] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be 02 (20100121/tbutils-314)
[ 0.703560] ACPI: No dock devices found.
[ 0.703563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.703802] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.704018] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.704021] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.704023] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.704026] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.704029] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xdfffffff]
[ 0.704031] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.704112] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.704114] pci 0000:00:09.0: PME# disabled
[ 0.704139] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.704141] pci 0000:00:0a.0: PME# disabled
[ 0.704180] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
[ 0.704186] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
[ 0.704191] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
[ 0.704196] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
[ 0.704202] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 0.704207] pci 0000:00:11.0: reg 24: [mem 0xfe6ffc00-0xfe6fffff]
[ 0.704258] pci 0000:00:12.0: reg 10: [mem 0xfe6fe000-0xfe6fefff]
[ 0.704304] pci 0000:00:12.1: reg 10: [mem 0xfe6fd000-0xfe6fdfff]
[ 0.704360] pci 0000:00:12.2: reg 10: [mem 0xfe6ff800-0xfe6ff8ff]
[ 0.704406] pci 0000:00:12.2: supports D1 D2
[ 0.704407] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.704411] pci 0000:00:12.2: PME# disabled
[ 0.704436] pci 0000:00:13.0: reg 10: [mem 0xfe6fc000-0xfe6fcfff]
[ 0.704483] pci 0000:00:13.1: reg 10: [mem 0xfe6f7000-0xfe6f7fff]
[ 0.704539] pci 0000:00:13.2: reg 10: [mem 0xfe6ff400-0xfe6ff4ff]
[ 0.704585] pci 0000:00:13.2: supports D1 D2
[ 0.704586] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.704590] pci 0000:00:13.2: PME# disabled
[ 0.704683] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.704688] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.704693] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.704699] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.704704] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.704757] pci 0000:00:14.2: reg 10: [mem 0xfe6f0000-0xfe6f3fff 64bit]
[ 0.704794] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.704798] pci 0000:00:14.2: PME# disabled
[ 0.704885] pci 0000:00:14.5: reg 10: [mem 0xfe6f6000-0xfe6f6fff]
[ 0.704992] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.704995] pci 0000:01:05.0: reg 14: [io 0xb000-0xb0ff]
[ 0.704997] pci 0000:01:05.0: reg 18: [mem 0xfe8f0000-0xfe8fffff]
[ 0.705002] pci 0000:01:05.0: reg 24: [mem 0xfe700000-0xfe7fffff]
[ 0.705011] pci 0000:01:05.0: supports D1 D2
[ 0.705044] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.705048] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.705050] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.705053] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.705093] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.705108] pci 0000:02:00.0: reg 18: [mem 0xfe9ff000-0xfe9fffff 64bit]
[ 0.705123] pci 0000:02:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.705154] pci 0000:02:00.0: supports D1 D2
[ 0.705155] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.705159] pci 0000:02:00.0: PME# disabled
[ 0.705171] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.705174] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.705176] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.705179] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.705214] pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.705227] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.705236] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.705242] pci 0000:03:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.705267] pci 0000:03:00.0: supports D1 D2
[ 0.705268] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.705271] pci 0000:03:00.0: PME# disabled
[ 0.705286] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.705289] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.705291] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.705294] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.705341] pci 0000:04:07.0: reg 10: [mem 0xfebff800-0xfebfffff]
[ 0.705348] pci 0000:04:07.0: reg 14: [io 0xe800-0xe87f]
[ 0.705401] pci 0000:04:07.0: supports D2
[ 0.705402] pci 0000:04:07.0: PME# supported from D2 D3hot D3cold
[ 0.705406] pci 0000:04:07.0: PME# disabled
[ 0.705448] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.705452] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.705455] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.705459] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.705461] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.705462] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.705464] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.705465] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.705467] pci 0000:00:14.4: bridge window [mem 0xdff00000-0xdfffffff] (subtractive decode)
[ 0.705468] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.705479] pci_bus 0000:00: on NUMA node 0
[ 0.705481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.705605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.705652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.705684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.705725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.709263] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.709331] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.709398] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.709464] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.709530] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.709597] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.709665] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *10 11 12 14 15)
[ 0.709731] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.709857] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.709861] vgaarb: loaded
[ 0.709942] SCSI subsystem initialized
[ 0.710036] libata version 3.00 loaded.
[ 0.710082] usbcore: registered new interface driver usbfs
[ 0.710107] usbcore: registered new interface driver hub
[ 0.710141] usbcore: registered new device driver usb
[ 0.880003] raid6: int64x1 2648 MB/s
[ 1.050004] raid6: int64x2 3939 MB/s
[ 1.220005] raid6: int64x4 3537 MB/s
[ 1.390022] raid6: int64x8 2733 MB/s
[ 1.560002] raid6: sse2x1 4596 MB/s
[ 1.730005] raid6: sse2x2 7781 MB/s
[ 1.900009] raid6: sse2x4 8995 MB/s
[ 1.900011] raid6: using algorithm sse2x4 (8995 MB/s)
[ 1.900015] PCI: Using ACPI for IRQ routing
[ 1.900017] PCI: pci_cache_line_size set to 64 bytes
[ 1.900080] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 1.900082] reserve RAM buffer: 00000000dfeb0000 - 00000000dfffffff
[ 1.900195] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.900199] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.902216] Switching to clocksource tsc
[ 1.902552] pnp: PnP ACPI init
[ 1.902556] ACPI: bus type pnp registered
[ 1.904911] pnp: PnP ACPI: found 13 devices
[ 1.904913] ACPI: ACPI bus type pnp unregistered
[ 1.904921] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.904924] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.904928] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.904930] system 00:08: [io 0x040b] has been reserved
[ 1.904933] system 00:08: [io 0x04d6] has been reserved
[ 1.904935] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 1.904937] system 00:08: [io 0x0c14] has been reserved
[ 1.904939] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 1.904941] system 00:08: [io 0x0c52] has been reserved
[ 1.904944] system 00:08: [io 0x0c6c] has been reserved
[ 1.904946] system 00:08: [io 0x0c6f] has been reserved
[ 1.904948] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 1.904950] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 1.904953] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 1.904955] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 1.904957] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 1.904960] system 00:08: [io 0x0800-0x089f] has been reserved
[ 1.904962] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 1.904964] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 1.904967] system 00:08: [io 0x0900-0x090f] has been reserved
[ 1.904969] system 00:08: [io 0x0910-0x091f] has been reserved
[ 1.904972] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 1.904974] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 1.904977] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 1.904980] system 00:0a: [io 0x0280-0x028f] has been reserved
[ 1.904983] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 1.904986] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.904990] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.904992] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.904996] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.904998] system 00:0c: [mem 0x00100000-0xdfefffff] could not be reserved
[ 1.905001] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.909573] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.909576] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 1.909579] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
[ 1.909582] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 1.909585] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.909588] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 1.909591] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.909593] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 1.909596] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.909598] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 1.909601] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.909604] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.909608] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 1.909611] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 1.909616] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.909620] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 1.909633] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.909636] pci 0000:00:09.0: setting latency timer to 64
[ 1.909640] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.909643] pci 0000:00:0a.0: setting latency timer to 64
[ 1.909648] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.909650] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.909651] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.909652] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.909654] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xdfffffff]
[ 1.909655] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.909656] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 1.909657] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 1.909659] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 1.909660] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.909662] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 1.909663] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 1.909664] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 1.909666] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.909667] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 1.909668] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 1.909670] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.909671] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.909672] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.909673] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.909675] pci_bus 0000:04: resource 8 [mem 0xdff00000-0xdfffffff]
[ 1.909676] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.909685] NET: Registered protocol family 2
[ 1.909708] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.909708] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.909708] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.909708] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.909708] TCP reno registered
[ 1.909708] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.909708] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.080026] pci 0000:01:05.0: Boot video device
[ 2.080035] PCI: CLS 64 bytes, default 64
[ 2.080232] PCI-DMA: Disabling AGP.
[ 2.080328] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 2.080331] PCI-DMA: using GART IOMMU.
[ 2.080333] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.085520] VFS: Disk quotas dquot_6.5.2
[ 2.085557] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.085788] msgmni has been set to 15984
[ 2.086038] alg: No test for stdrng (krng)
[ 2.086045] io scheduler noop registered
[ 2.086048] io scheduler deadline registered (default)
[ 2.086115] pcieport 0000:00:09.0: setting latency timer to 64
[ 2.086133] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[ 2.086194] pcieport 0000:00:0a.0: setting latency timer to 64
[ 2.086209] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
[ 2.088025] Linux agpgart interface v0.103
[ 2.088963] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000080000, using 11550k, total 16384k
[ 2.088966] vesafb: mode is 1400x1050x32, linelength=5632, pages=1
[ 2.088968] vesafb: scrolling: redraw
[ 2.088970] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 2.104386] Console: switching to colour frame buffer device 175x65
[ 2.119687] fb0: VESA VGA frame buffer device
[ 2.119856] vga16fb: initializing
[ 2.119856] vga16fb: mapped to 0xffff8800000a0000
[ 2.119955] fb1: VGA16 VGA frame buffer device
[ 2.120139] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.120270] ACPI: Power Button [PWRB]
[ 2.120362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.120479] ACPI: Power Button [PWRF]
[ 2.121644] brd: module loaded
[ 2.122121] loop: module loaded
[ 2.122168] Uniform Multi-Platform E-IDE driver
[ 2.122287] ide-gd driver 1.18
[ 2.122402] ahci 0000:00:11.0: version 3.0
[ 2.122415] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.122553] ahci 0000:00:11.0: irq 26 for MSI/MSI-X
[ 2.122640] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.122765] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.123154] scsi0 : ahci
[ 2.123291] scsi1 : ahci
[ 2.123389] scsi2 : ahci
[ 2.123488] scsi3 : ahci
[ 2.123584] scsi4 : ahci
[ 2.123678] scsi5 : ahci
[ 2.123770] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 26
[ 2.123885] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 26
[ 2.124000] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 26
[ 2.124118] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 26
[ 2.124235] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 26
[ 2.124352] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 26
[ 2.124606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.124717] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.124838] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.124929] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.125069] ehci_hcd 0000:00:12.2: debug port 1
[ 2.125152] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe6ff800
[ 2.140016] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.140128] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.140236] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.140347] usb usb1: Product: EHCI Host Controller
[ 2.140422] usb usb1: Manufacturer: Linux 2.6.34-gentoo ehci_hcd
[ 2.140513] usb usb1: SerialNumber: 0000:00:12.2
[ 2.140690] hub 1-0:1.0: USB hub found
[ 2.140750] hub 1-0:1.0: 6 ports detected
[ 2.143100] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.145554] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.147996] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.150613] ehci_hcd 0000:00:13.2: debug port 1
[ 2.153204] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe6ff400
[ 2.170015] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.172695] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.175455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.178256] usb usb2: Product: EHCI Host Controller
[ 2.181145] usb usb2: Manufacturer: Linux 2.6.34-gentoo ehci_hcd
[ 2.184092] usb usb2: SerialNumber: 0000:00:13.2
[ 2.187153] hub 2-0:1.0: USB hub found
[ 2.190172] hub 2-0:1.0: 6 ports detected
[ 2.193286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.196411] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.199672] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.202985] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.206385] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe6fe000
[ 2.264029] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.267518] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.271106] usb usb3: Product: OHCI Host Controller
[ 2.274694] usb usb3: Manufacturer: Linux 2.6.34-gentoo ohci_hcd
[ 2.278368] usb usb3: SerialNumber: 0000:00:12.0
[ 2.282186] hub 3-0:1.0: USB hub found
[ 2.285856] hub 3-0:1.0: 3 ports detected
[ 2.289511] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.293284] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.296972] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.300664] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe6fd000
[ 2.364025] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.367617] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.371221] usb usb4: Product: OHCI Host Controller
[ 2.374792] usb usb4: Manufacturer: Linux 2.6.34-gentoo ohci_hcd
[ 2.378395] usb usb4: SerialNumber: 0000:00:12.1
[ 2.382119] hub 4-0:1.0: USB hub found
[ 2.385762] hub 4-0:1.0: 3 ports detected
[ 2.389351] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.393014] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.396545] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.400140] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe6fc000
[ 2.464026] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.467728] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.471483] usb usb5: Product: OHCI Host Controller
[ 2.475277] usb usb5: Manufacturer: Linux 2.6.34-gentoo ohci_hcd
[ 2.479125] usb usb5: SerialNumber: 0000:00:13.0
[ 2.483037] hub 5-0:1.0: USB hub found
[ 2.486859] hub 5-0:1.0: 3 ports detected
[ 2.490758] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.494760] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.498764] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.502904] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe6f7000
[ 2.564024] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.568063] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.572164] usb usb6: Product: OHCI Host Controller
[ 2.576195] usb usb6: Manufacturer: Linux 2.6.34-gentoo ohci_hcd
[ 2.580258] usb usb6: SerialNumber: 0000:00:13.1
[ 2.584415] hub 6-0:1.0: USB hub found
[ 2.588482] hub 6-0:1.0: 3 ports detected
[ 2.592550] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.596606] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.600646] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.604703] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe6f6000
[ 2.651279] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.652534] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.652556] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.652576] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.652595] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.653775] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.653914] ata4.00: ATA-8: ST31500341AS, SD1B, max UDMA/133
[ 2.653916] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.653950] ata3.00: ATA-8: ST31500341AS, SD1B, max UDMA/133
[ 2.653951] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.655134] ata6.00: ATA-8: ST31500341AS, SD1B, max UDMA/133
[ 2.655136] ata6.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.655622] ata4.00: configured for UDMA/133
[ 2.655660] ata3.00: configured for UDMA/133
[ 2.656845] ata6.00: configured for UDMA/133
[ 2.664026] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.664027] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.664029] usb usb7: Product: OHCI Host Controller
[ 2.664029] usb usb7: Manufacturer: Linux 2.6.34-gentoo ohci_hcd
[ 2.664030] usb usb7: SerialNumber: 0000:00:14.5
[ 2.664123] hub 7-0:1.0: USB hub found
[ 2.664125] hub 7-0:1.0: 2 ports detected
[ 2.664174] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.664308] PNP: No PS/2 controller found. Probing ports directly.
[ 2.667034] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.667037] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.667118] mice: PS/2 mouse device common for all mice
[ 2.667157] md: raid0 personality registered for level 0
[ 2.667158] md: raid1 personality registered for level 1
[ 2.667160] md: raid6 personality registered for level 6
[ 2.667161] md: raid5 personality registered for level 5
[ 2.667161] md: raid4 personality registered for level 4
[ 2.667376] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 2.667410] cpuidle: using governor ladder
[ 2.667442] TCP cubic registered
[ 2.667522] registered taskstats version 1
[ 2.681026] ata5.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 2.681028] ata5.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.681200] ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 2.681201] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.722701] ata5.00: configured for UDMA/133
[ 2.723198] ata2.00: configured for UDMA/133
[ 2.810179] ata1.00: ATA-8: ST31500341AS, SD1B, max UDMA/133
[ 2.813699] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.818940] ata1.00: configured for UDMA/133
[ 2.841296] scsi 0:0:0:0: Direct-Access ATA ST31500341AS SD1B PQ: 0 ANSI: 5
[ 2.845116] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.845156] scsi 1:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.845286] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.845307] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.845308] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.845321] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.845353] scsi 2:0:0:0: Direct-Access ATA ST31500341AS SD1B PQ: 0 ANSI: 5
[ 2.845381] sdb:
[ 2.845471] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.845514] scsi 3:0:0:0: Direct-Access ATA ST31500341AS SD1B PQ: 0 ANSI: 5
[ 2.845532] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.845533] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.845557] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.845639] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.845656] sdc:
[ 2.845666] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.845667] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.845694] scsi 4:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.845728] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.845801] sdd:
[ 2.845860] sd 4:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.845879] sd 4:0:0:0: [sde] Write Protect is off
[ 2.845881] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.845892] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.845916] scsi 5:0:0:0: Direct-Access ATA ST31500341AS SD1B PQ: 0 ANSI: 5
[ 2.845940] sde:
[ 2.846009] sd 5:0:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.846026] sd 5:0:0:0: [sdf] Write Protect is off
[ 2.846027] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 2.846035] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.846081] sdf: sdb1 sdb2 < sdb5 sdb6 sde1 sde2 < sdd1 sdd2 < sdc1 sdc2 < sdf1 sdf2 < sdb7 sdd5 sde5 sdf5 sdb8 >
[ 2.948552] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 2.948540] sde6 sdf6 sdc5 sdd6
[ 2.948736] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.952215] sdf7 sdd7 sde7 sdf8 >
[ 2.966536] sde8
[ 2.966573] sd 0:0:0:0: [sda] Write Protect is off
[ 2.966574] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.966583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.966721] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 2.984605] >
[ 2.989141] sdd8 >
[ 2.992669] sd 4:0:0:0: [sde] Attached SCSI disk
[ 2.998158] sdc6
[ 2.998214] sda:
[ 2.998407] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.011508] sdc7 sdc8 >
[ 3.019755] sda1 sda2 <
[ 3.020061] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.028735] sda5 sda6 sda7 sda8 >
[ 3.065090] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.069495] md: Waiting for all devices to be available before autodetect
[ 3.073972] md: If you don't use raid, use raid=noautodetect
[ 3.078564] md: Autodetecting RAID arrays.
[ 3.339357] md: Scanned 24 and added 24 devices.
[ 3.343944] md: autorun ...
[ 3.348423] md: considering sda8 ...
[ 3.352916] md: adding sda8 ...
[ 3.357335] md: sda7 has different UUID to sda8
[ 3.361748] md: sda6 has different UUID to sda8
[ 3.366165] md: sda5 has different UUID to sda8
[ 3.370514] md: adding sdc8 ...
[ 3.374844] md: sdc7 has different UUID to sda8
[ 3.379165] md: sdc6 has different UUID to sda8
[ 3.383409] md: sdc5 has different UUID to sda8
[ 3.387571] md: adding sdd8 ...
[ 3.391654] md: sdd7 has different UUID to sda8
[ 3.395739] md: sdd6 has different UUID to sda8
[ 3.399727] md: sdd5 has different UUID to sda8
[ 3.403651] md: adding sde8 ...
[ 3.407467] md: sde7 has different UUID to sda8
[ 3.411312] md: sde6 has different UUID to sda8
[ 3.415064] md: sde5 has different UUID to sda8
[ 3.418741] md: adding sdf8 ...
[ 3.422360] md: sdf7 has different UUID to sda8
[ 3.425997] md: sdf6 has different UUID to sda8
[ 3.429505] md: sdf5 has different UUID to sda8
[ 3.432940] md: adding sdb8 ...
[ 3.436334] md: sdb7 has different UUID to sda8
[ 3.439733] md: sdb6 has different UUID to sda8
[ 3.443051] md: sdb5 has different UUID to sda8
[ 3.446334] md: created md4
[ 3.449438] md: bind<sdb8>
[ 3.452524] md: bind<sdf8>
[ 3.455536] md: bind<sde8>
[ 3.458446] md: bind<sdd8>
[ 3.461286] md: bind<sdc8>
[ 3.464054] md: bind<sda8>
[ 3.466723] md: running: <sda8><sdc8><sdd8><sde8><sdf8><sdb8>
[ 3.469538] raid5: device sda8 operational as raid disk 2
[ 3.472196] raid5: device sdc8 operational as raid disk 1
[ 3.474794] raid5: device sdd8 operational as raid disk 3
[ 3.477296] raid5: device sde8 operational as raid disk 5
[ 3.479735] raid5: device sdf8 operational as raid disk 0
[ 3.482362] raid5: allocated 6372kB for md4
[ 3.484844] 2: w=1 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
[ 3.487239] 1: w=2 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
[ 3.489600] 3: w=3 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
[ 3.491872] 5: w=4 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
[ 3.494147] 0: w=5 pa=0 pr=6 m=2 a=2 r=6 op1=0 op2=0
[ 3.496405] raid5: raid level 6 set md4 active with 5 out of 6 devices, algorithm 2
[ 3.498715] RAID5 conf printout:
[ 3.500986] --- rd:6 wd:5
[ 3.505723] disk 0, o:1, dev:sdf8
[ 3.508108] disk 1, o:1, dev:sdc8
[ 3.510466] disk 2, o:1, dev:sda8
[ 3.512829] disk 3, o:1, dev:sdd8
[ 3.515095] disk 5, o:1, dev:sde8
[ 3.520675] md4: bitmap initialized from disk: read 11/11 pages, set 2299 bits
[ 3.523011] created bitmap (173 pages) for device md4
[ 3.535962] md4: detected capacity change from 0 to 5918647648256
[ 3.538313] md: considering sda7 ...
[ 3.538315] RAID5 conf printout:
[ 3.538317] --- rd:6 wd:5
[ 3.538318] disk 0, o:1, dev:sdf8
[ 3.538319] disk 1, o:1, dev:sdc8
[ 3.538320] disk 2, o:1, dev:sda8
[ 3.538321] disk 3, o:1, dev:sdd8
[ 3.538321] disk 4, o:1, dev:sdb8
[ 3.538322] disk 5, o:1, dev:sde8
[ 3.538388] md: recovery of RAID array md4
[ 3.538389] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 3.538390] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 3.538392] md: using 128k window, over a total of 1444982336 blocks.
[ 3.566184] md: adding sda7 ...
[ 3.568434] md: sda6 has different UUID to sda7
[ 3.570698] md: sda5 has different UUID to sda7
[ 3.573007] md: adding sdc7 ...
[ 3.575300] md: sdc6 has different UUID to sda7
[ 3.577624] md: sdc5 has different UUID to sda7
[ 3.579898] md: adding sdd7 ...
[ 3.582190] md: sdd6 has different UUID to sda7
[ 3.584557] md: sdd5 has different UUID to sda7
[ 3.586863] md: adding sde7 ...
[ 3.589164] md: sde6 has different UUID to sda7
[ 3.591500] md: sde5 has different UUID to sda7
[ 3.593856] md: adding sdf7 ...
[ 3.596161] md: sdf6 has different UUID to sda7
[ 3.598491] md: sdf5 has different UUID to sda7
[ 3.600820] md: adding sdb7 ...
[ 3.603198] md: sdb6 has different UUID to sda7
[ 3.605570] md: sdb5 has different UUID to sda7
[ 3.607979] md: created md3
[ 3.610323] md: bind<sdb7>
[ 3.612700] md: bind<sdf7>
[ 3.615021] md: bind<sde7>
[ 3.617345] md: bind<sdd7>
[ 3.619667] md: bind<sdc7>
[ 3.621972] md: bind<sda7>
[ 3.624312] md: running: <sda7><sdc7><sdd7><sde7><sdf7><sdb7>
[ 3.637004] raid5: device sda7 operational as raid disk 2
[ 3.639564] raid5: device sdc7 operational as raid disk 1
[ 3.642128] raid5: device sdd7 operational as raid disk 3
[ 3.644729] raid5: device sde7 operational as raid disk 4
[ 3.647232] raid5: device sdf7 operational as raid disk 0
[ 3.649906] raid5: allocated 5322kB for md3
[ 3.652444] 2: w=1 pa=0 pr=5 m=2 a=2 r=5 op1=0 op2=0
[ 3.655011] 1: w=2 pa=0 pr=5 m=2 a=2 r=5 op1=0 op2=0
[ 3.657568] 3: w=3 pa=0 pr=5 m=2 a=2 r=5 op1=0 op2=0
[ 3.660134] 4: w=4 pa=0 pr=5 m=2 a=2 r=5 op1=0 op2=0
[ 3.662634] 0: w=5 pa=0 pr=5 m=2 a=2 r=5 op1=0 op2=0
[ 3.665028] raid5: raid level 6 set md3 active with 5 out of 5 devices, algorithm 2
[ 3.667509] RAID5 conf printout:
[ 3.669981] --- rd:5 wd:5
[ 3.672373] disk 0, o:1, dev:sdf7
[ 3.674858] disk 1, o:1, dev:sdc7
[ 3.677298] disk 2, o:1, dev:sda7
[ 3.679713] disk 3, o:1, dev:sdd7
[ 3.682107] disk 4, o:1, dev:sde7
[ 3.701428] md3: bitmap initialized from disk: read 9/9 pages, set 0 bits
[ 3.703864] created bitmap (129 pages) for device md3
[ 3.711011] usb 4-1.4: new full speed USB device using ohci_hcd and address 4
[ 3.731986] md3: detected capacity change from 0 to 12905152512
[ 3.734529] md: considering sda6 ...
[ 3.737002] md: adding sda6 ...
[ 3.739456] md: sda5 has different UUID to sda6
[ 3.741994] md: adding sdc6 ...
[ 3.744595] md: sdc5 has different UUID to sda6
[ 3.747160] md: adding sdd6 ...
[ 3.749732] md: sdd5 has different UUID to sda6
[ 3.752396] md: adding sde6 ...
[ 3.755068] md: sde5 has different UUID to sda6
[ 3.757697] md: adding sdf6 ...
[ 3.760255] md: sdf5 has different UUID to sda6
[ 3.762786] md: adding sdb6 ...
[ 3.765233] md: sdb5 has different UUID to sda6
[ 3.767879] md: created md2
[ 3.770383] md: bind<sdb6>
[ 3.772911] md: bind<sdf6>
[ 3.775354] md: bind<sde6>
[ 3.777812] md: bind<sdd6>
[ 3.780236] md: bind<sdc6>
[ 3.782648] md: bind<sda6>
[ 3.785011] md: running: <sda6><sdc6><sdd6><sde6><sdf6><sdb6>
[ 3.787596] raid5: device sda6 operational as raid disk 2
[ 3.790086] raid5: device sdc6 operational as raid disk 1
[ 3.792616] raid5: device sdd6 operational as raid disk 3
[ 3.795052] raid5: device sdf6 operational as raid disk 0
[ 3.797658] raid5: allocated 4272kB for md2
[ 3.800124] 2: w=1 pa=0 pr=4 m=2 a=2 r=4 op1=0 op2=0
[ 3.802636] 1: w=2 pa=0 pr=4 m=2 a=2 r=4 op1=0 op2=0
[ 3.805058] 3: w=3 pa=0 pr=4 m=2 a=2 r=4 op1=0 op2=0
[ 3.807492] 0: w=4 pa=0 pr=4 m=2 a=2 r=4 op1=0 op2=0
[ 3.809894] raid5: raid level 6 set md2 active with 4 out of 4 devices, algorithm 2
[ 3.812439] RAID5 conf printout:
[ 3.814957] --- rd:4 wd:4
[ 3.817501] disk 0, o:1, dev:sdf6
[ 3.820057] disk 1, o:1, dev:sdc6
[ 3.822802] disk 2, o:1, dev:sda6
[ 3.825411] disk 3, o:1, dev:sdd6
[ 3.849537] md2: bitmap initialized from disk: read 15/15 pages, set 50 bits
[ 3.852120] created bitmap (225 pages) for device md2
[ 3.882850] md2: detected capacity change from 0 to 15052046336
[ 3.885571] md: considering sda5 ...
[ 3.888289] md: adding sda5 ...
[ 3.891049] md: adding sdc5 ...
[ 3.893781] md: adding sdd5 ...
[ 3.896509] md: adding sde5 ...
[ 3.899169] md: adding sdf5 ...
[ 3.901814] md: adding sdb5 ...
[ 3.904576] md: created md1
[ 3.907217] md: bind<sdb5>
[ 3.909782] md: bind<sdf5>
[ 3.912303] md: bind<sde5>
[ 3.914805] md: bind<sdd5>
[ 3.917254] md: bind<sdc5>
[ 3.919702] md: bind<sda5>
[ 3.922154] md: running: <sda5><sdc5><sdd5><sde5><sdf5><sdb5>
[ 3.924864] raid1: raid set md1 active with 4 out of 4 mirrors
[ 3.931471] md1: bitmap initialized from disk: read 9/9 pages, set 2048 bits
[ 3.934127] created bitmap (129 pages) for device md1
[ 3.950546] md1: detected capacity change from 0 to 8595308544
[ 3.953203] md: ... autorun DONE.
[ 3.955795] md2: unknown partition table
[ 3.959431] EXT3-fs (md2): recovery required on readonly filesystem
[ 3.962038] EXT3-fs (md2): write access will be enabled during recovery
[ 4.490169] kjournald starting. Commit interval 5 seconds
[ 4.490171] EXT3-fs (md2): orphan cleanup on readonly fs
[ 4.490176] ext3_orphan_cleanup: deleting unreferenced inode 732969
[ 4.490191] ext3_orphan_cleanup: deleting unreferenced inode 732968
[ 4.490194] ext3_orphan_cleanup: deleting unreferenced inode 732967
[ 4.490197] ext3_orphan_cleanup: deleting unreferenced inode 732966
[ 4.490200] ext3_orphan_cleanup: deleting unreferenced inode 732965
[ 4.490202] EXT3-fs (md2): 5 orphan inodes deleted
[ 4.490203] EXT3-fs (md2): recovery complete
[ 4.537017] EXT3-fs (md2): mounted filesystem with ordered data mode
[ 4.539745] VFS: Mounted root (ext3 filesystem) readonly on device 9:2.
[ 4.542556] Freeing unused kernel memory: 460k freed
[ 4.545407] Write protecting the kernel read-only data: 6144k
[ 4.548272] Freeing unused kernel memory: 804k freed
[ 4.551319] Freeing unused kernel memory: 556k freed
[ 5.212512] NET: Registered protocol family 1
[ 6.216151] udev: starting version 149
[ 6.285392] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.285417] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.285430] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.285443] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.285456] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 6.285469] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 6.287396] EDAC MC: Ver: 2.1.0 May 22 2010
[ 6.313219] md3:
[ 6.313251] md4:
[ 6.313300] md1:
[ 6.318183] rtc_cmos 00:03: RTC can wake from S4
[ 6.318216] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.318240] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.321685] unknown partition table
[ 6.332833] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.332848] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.332897] r8169 0000:02:00.0: setting latency timer to 64
[ 6.332945] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[ 6.333003] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000ce4000, 00:08:54:56:4f:3e, XID 18000000 IRQ 27
[ 6.333071] unknown partition table
[ 6.334387] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.334395] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.334413] r8169 0000:03:00.0: setting latency timer to 64
[ 6.334416] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
[ 6.334446] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[ 6.334486] r8169 0000:03:00.0: eth1: RTL8168b/8111b at 0xffffc90000068000, 00:08:54:56:4f:3e, XID 083000c0 IRQ 28
[ 6.338106] EDAC amd64_edac: Ver: 3.3.0 May 22 2010
[ 6.338124] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 6.338128] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.338129] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 6.338130] (Note that use of the override may cause unknown side effects.)
[ 6.338133] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 6.338847] unknown partition table
[ 6.453643] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 6.453747] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 6.490230] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 7.022888] EXT3-fs (md2): using internal journal
[ 7.276268] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00)
[ 7.276299] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 7.276300] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 7.276301] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 7.276302] powernow-k8: 3 : pstate 3 (800 MHz)
[ 7.328159] fuse init (API version 7.13)
[ 7.402559] md: md0 stopped.
[ 7.415095] md: bind<sdc1>
[ 7.416345] md: bind<sda1>
[ 7.416576] md: bind<sdd1>
[ 7.416762] md: bind<sde1>
[ 7.417374] md: bind<sdb1>
[ 7.418025] md: bind<sdf1>
[ 7.418669] raid1: raid set md0 active with 6 out of 6 mirrors
[ 7.419812] md0: bitmap initialized from disk: read 2/2 pages, set 0 bits
[ 7.419813] created bitmap (26 pages) for device md0
[ 7.438655] md0: detected capacity change from 0 to 213712896
[ 7.439222] md0: unknown partition table
[ 11.729436] kjournald starting. Commit interval 5 seconds
[ 11.752886] EXT3-fs (md3): using internal journal
[ 11.752886] EXT3-fs (md3): mounted filesystem with ordered data mode
[ 11.838492] kjournald starting. Commit interval 5 seconds
[ 11.839501] EXT3-fs (md4): using internal journal
[ 11.839504] EXT3-fs (md4): mounted filesystem with ordered data mode
[ 11.897785] Adding 8393852k swap on /dev/md1. Priority:-1 extents:1 across:8393852k
[ 16.120764] r8169 0000:02:00.0: eth0: link up
[ 16.120752] r8169 0000:02:00.0: eth0: link up
[ 16.423539] r8169 0000:03:00.0: eth1: link up
[ 16.423525] r8169 0000:03:00.0: eth1: link up
[ 17.726153] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.736524] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.736628] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 17.736629] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 17.736631] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 25.121441] w83627ehf: Found W83627EHG chip at 0x290
[ 25.224217] w83627ehf w83627ehf.656: fan3 low limit and alarm disabled
[ 25.609571] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
[ 25.609574] bonding: MII link monitoring set to 100 ms
[ 25.742788] r8169 0000:02:00.0: eth0: link up
[ 25.744028] bonding: bond0: enslaving eth0 as an active interface with an up link.
[ 25.842782] r8169 0000:03:00.0: eth1: link up
[ 25.844011] bonding: bond0: enslaving eth1 as an active interface with an up link.
[ 26.914539] NET: Registered protocol family 17
[ 45.898234] TCP highspeed registered
[-- Attachment #3: dmidecode.log --]
[-- Type: text/x-log, Size: 9501 bytes --]
# dmidecode 2.10
SMBIOS 2.5 present.
30 structures occupying 1428 bytes.
Table at 0x000FC480.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: P1.80
Release Date: 03/31/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 1024 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 8.15
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASRock
Product Name: M3A790GXH/128M
Version:
Serial Number:
Asset Tag:
Features:
Board is a hosting board
Board is replaceable
Location In Chassis:
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: To Be Filled By O.E.M.
Type: Desktop
Lock: Not Present
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPUSocket
Type: Central Processor
Family: <OUT OF SPEC>
Manufacturer: AMD
ID: 42 0F 10 00 FF FB 8B 17
Version: AMD Phenom(tm) II X4 955 Processor
Voltage: 1.5 V
External Clock: 200 MHz
Max Speed: 3200 MHz
Current Speed: 3200 MHz
Status: Populated, Enabled
Upgrade: Socket 940
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 4
Core Enabled: 4
Characteristics:
64-bit capable
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 2048 kB
Maximum Size: 2048 kB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0007, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 4
0x0008
0x0009
0x000A
0x000B
Enabled Error Correcting Capabilities:
None
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 7
Current Speed: 161 ns
Type: ECC DIMM
Installed Size: 4096 MB (Double-bank Connection)
Enabled Size: 4096 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 0 7
Current Speed: 163 ns
Type: ECC DIMM
Installed Size: 4096 MB (Double-bank Connection)
Enabled Size: 4096 MB (Double-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 0
Current Speed: Unknown
Type: Other
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: 0
Current Speed: Unknown
Type: Other
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000E, DMI type 9, 13 bytes
System Slot Information
Designation: PCIE1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 17
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000F, DMI type 9, 13 bytes
System Slot Information
Designation: PCIE2
Type: x16 PCI Express
Current Usage: Available
Length: Short
ID: 18
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0010, DMI type 9, 13 bytes
System Slot Information
Designation: PCIE3
Type: x8 PCI Express
Current Usage: Available
Length: Short
ID: 19
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0011, DMI type 9, 13 bytes
System Slot Information
Designation: PCIE4
Type: x4 PCI Express
Current Usage: Available
Length: Short
ID: 20
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0012, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 8 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0013, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0021FFFFFFF
Range Size: 8704 MB
Physical Array Handle: 0x0012
Partition Width: 0
Handle 0x0014, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0012
Error Information Handle: Not Provided
Total Width: 84 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: Other
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: Manufacturer0
Serial Number: SerNum0
Asset Tag: AssetTagNum0
Part Number: PartNum0
Handle 0x0015, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Device Handle: 0x0014
Memory Array Mapped Address Handle: 0x0013
Partition Row Position: 1
Handle 0x0016, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0012
Error Information Handle: Not Provided
Total Width: 189 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK1
Type: Other
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: Manufacturer1
Serial Number: SerNum1
Asset Tag: AssetTagNum1
Part Number: PartNum1
Handle 0x0017, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00100000000
Ending Address: 0x001FFFFFFFF
Range Size: 4 GB
Physical Device Handle: 0x0016
Memory Array Mapped Address Handle: 0x0013
Partition Row Position: 1
Handle 0x0018, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0012
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: 64 bits
Size: No Module Installed
Form Factor: Other
Set: None
Locator: DIMM2
Bank Locator: BANK2
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Manufacturer2
Serial Number: SerNum2
Asset Tag: AssetTagNum2
Part Number: PartNum2
Handle 0x0019, DMI type 126, 19 bytes
Inactive
Handle 0x001A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0012
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: 64 bits
Size: No Module Installed
Form Factor: Other
Set: None
Locator: DIMM3
Bank Locator: BANK3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Manufacturer3
Serial Number: SerNum3
Asset Tag: AssetTagNum3
Part Number: PartNum3
Handle 0x001B, DMI type 126, 19 bytes
Inactive
Handle 0x001C, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x001D, DMI type 127, 4 bytes
End Of Table
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2010-05-23 20:44 ` Markus
@ 2010-05-23 21:17 ` Borislav Petkov
2010-05-23 21:48 ` Markus
` (2 more replies)
0 siblings, 3 replies; 17+ messages in thread
From: Borislav Petkov @ 2010-05-23 21:17 UTC (permalink / raw)
To: Markus; +Cc: linux-kernel
From: Markus <M4rkusXXL@web.de>
Date: Sun, May 23, 2010 at 10:44:41PM +0200
> It is 0000000001912178.
> http://img256.imageshack.us/img256/4370/shotn.gif
True story, the fact that this value is not what it is expected to be
judging from the code it happens might actually be a clue:
[64112.502507] Code: 8b bf b0 00 00 00 31 ed 48 8d 50 f0 48 85 c0 48 0f 45 ea 48 85 ff 74 10 48 89 ee e8 8d d3 ff ff 85 c0 0f 8e c5 00 00 00 48 89 eb <49> 8b bd b8 00 00 00 48 85 ff 74 10 48 89 ee e8 6e d3 ff ff 85
All code
========
0: 8b bf b0 00 00 00 mov 0xb0(%rdi),%edi
6: 31 ed xor %ebp,%ebp
8: 48 8d 50 f0 lea -0x10(%rax),%rdx
c: 48 85 c0 test %rax,%rax
f: 48 0f 45 ea cmovne %rdx,%rbp
13: 48 85 ff test %rdi,%rdi
16: 74 10 je 0x28
18: 48 89 ee mov %rbp,%rsi
1b: e8 8d d3 ff ff callq 0xffffffffffffd3ad
20: 85 c0 test %eax,%eax
22: 0f 8e c5 00 00 00 jle 0xed
28: 48 89 eb mov %rbp,%rbx
2b:* 49 8b bd b8 00 00 00 mov 0xb8(%r13),%rdi <-- trapping instruction
32: 48 85 ff test %rdi,%rdi
35: 74 10 je 0x47
37: 48 89 ee mov %rbp,%rsi
3a: e8 6e d3 ff ff callq 0xffffffffffffd3ad
3f: 85 .byte 0x85
Code starting with the faulting instruction
===========================================
0: 49 8b bd b8 00 00 00 mov 0xb8(%r13),%rdi
7: 48 85 ff test %rdi,%rdi
a: 74 10 je 0x1c
c: 48 89 ee mov %rbp,%rsi
f: e8 6e d3 ff ff callq 0xffffffffffffd382
14: 85 .byte 0x85
and %r13 contains 00000000019129c0 in the register snapshot. Hmm...
> Serial console is no option, but this "netconsole"-thing looks
> promising. I'll set that up and try to catch the next one with this.
That'll help. Also let me make sure: Is this a vanilla kernel or are
there any distribution patches on top of it? I see it says 2.6.34-gentoo
but just in case. If it is not a vanilla kernel please try a vanilla one
from kernel.org.
Also, please send the whole dmesg of the system, there might be
something suspicious there and also the output of 'cat /proc/cpuinfo'
and 'dmidecode', the last one run as root.
Thanks.
--
Regards/Gruss,
Boris.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2010-05-23 18:38 ` Borislav Petkov
@ 2010-05-23 20:44 ` Markus
2010-05-23 21:17 ` Borislav Petkov
0 siblings, 1 reply; 17+ messages in thread
From: Markus @ 2010-05-23 20:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Borislav Petkov
Hi!
It is 0000000001912178.
http://img256.imageshack.us/img256/4370/shotn.gif
Serial console is no option, but this "netconsole"-thing looks
promising. I'll set that up and try to catch the next one with this.
Thanks, so far
Markus
> From: Markus <M4rkusXXL@web.de>
> Date: Sun, May 23, 2010 at 06:29:32PM +0200
>
> > Hello!
> >
> > I have a system running, now its running a 2.6.34 but it also
> > happend with 2.6.33.x and 2.6.32.x.
> > I hit a BUG and the whole system hang. I had to reboot and the
> > console was to small to show the full BUG.
> > But now I got the framebuffer setup and could write the following
> > dump down (by hand, so there might be some typos or so, I have a
> > "screenshot" if you have a specific question)
> >
> > The system is a amd64 phenom X4 with 2 x 4GB non-ECC RAM and a
> > raid6 for / and a data-partition as well as a raid1 for swap.
> > I ran memtest86+ 4.0 and it showed no errors for two passes.
> >
> > An hour before that BUG I saw a lot of async-processes.
> > It happens round about once a day, will check if its the same or
> > similar the next time.
> >
> > But any hints are greatly appreciated! (How to solve or how to get
> > needed informations.)
> >
> > Thanks,
> > Markus
> >
> > PS: Please CC me.
> >
> >
> > [64112.493940] BUG: unable to handle kernel paging request at
> > 0000000001912178
>
> Ok, I'm looking at that oops and am trying to follow what happens but
> in order for all to fit the 0000000001912178 value above should
> actually be 0000000001912a78, if I'm not mistaken.
>
> Can you please check if that's the case or send me that screenshot
> you mention above. Better yet, can you catch that oops over a serial
> console or a netconsole or similar?
>
> Thanks.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: BUG: unable to handle kernel paging request
2010-05-23 16:29 Markus
@ 2010-05-23 18:38 ` Borislav Petkov
2010-05-23 20:44 ` Markus
0 siblings, 1 reply; 17+ messages in thread
From: Borislav Petkov @ 2010-05-23 18:38 UTC (permalink / raw)
To: Markus; +Cc: lkml
From: Markus <M4rkusXXL@web.de>
Date: Sun, May 23, 2010 at 06:29:32PM +0200
> Hello!
>
> I have a system running, now its running a 2.6.34 but it also happend
> with 2.6.33.x and 2.6.32.x.
> I hit a BUG and the whole system hang. I had to reboot and the console
> was to small to show the full BUG.
> But now I got the framebuffer setup and could write the following dump
> down (by hand, so there might be some typos or so, I have a "screenshot"
> if you have a specific question)
>
> The system is a amd64 phenom X4 with 2 x 4GB non-ECC RAM and a raid6 for
> / and a data-partition as well as a raid1 for swap.
> I ran memtest86+ 4.0 and it showed no errors for two passes.
>
> An hour before that BUG I saw a lot of async-processes.
> It happens round about once a day, will check if its the same or similar
> the next time.
>
> But any hints are greatly appreciated! (How to solve or how to get
> needed informations.)
>
> Thanks,
> Markus
>
> PS: Please CC me.
>
>
> [64112.493940] BUG: unable to handle kernel paging request at 0000000001912178
Ok, I'm looking at that oops and am trying to follow what happens but in
order for all to fit the 0000000001912178 value above should actually be
0000000001912a78, if I'm not mistaken.
Can you please check if that's the case or send me that screenshot you
mention above. Better yet, can you catch that oops over a serial console
or a netconsole or similar?
Thanks.
--
Regards/Gruss,
Boris.
^ permalink raw reply [flat|nested] 17+ messages in thread
* BUG: unable to handle kernel paging request
@ 2010-05-23 16:29 Markus
2010-05-23 18:38 ` Borislav Petkov
0 siblings, 1 reply; 17+ messages in thread
From: Markus @ 2010-05-23 16:29 UTC (permalink / raw)
To: lkml
Hello!
I have a system running, now its running a 2.6.34 but it also happend
with 2.6.33.x and 2.6.32.x.
I hit a BUG and the whole system hang. I had to reboot and the console
was to small to show the full BUG.
But now I got the framebuffer setup and could write the following dump
down (by hand, so there might be some typos or so, I have a "screenshot"
if you have a specific question)
The system is a amd64 phenom X4 with 2 x 4GB non-ECC RAM and a raid6 for
/ and a data-partition as well as a raid1 for swap.
I ran memtest86+ 4.0 and it showed no errors for two passes.
An hour before that BUG I saw a lot of async-processes.
It happens round about once a day, will check if its the same or similar
the next time.
But any hints are greatly appreciated! (How to solve or how to get
needed informations.)
Thanks,
Markus
PS: Please CC me.
[64112.493940] BUG: unable to handle kernel paging request at
0000000001912178
[64112.499847] IP: [<ffffffff810303fe>] pick_next_task_fair+0x4e/0x130
[64112.502507] PGD 0
[64112.502507] Oops: 0000 [#1] SMP
[64112.502507] last sysfs file:
/sys/devices/platform/w83627ehf.656/cpu0_vid
[64112.502507] CPU 2
[64112.502507] Modules linked in: xt_time ftdi_sio usbserial
tcp_highspeed cpufreq_userspace af_packet bonding w83627ehf hwmon_vid
ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state
iptables_filter ipt_addrtype xt_dscp xt_string xt_owner xt_multiport
xt_mark xt_iprange xt_hashlimit xt_connmark xt_NFQUEUE xt_MARK
xt_CONNMARK nf_conntrack ip_tables x_tables fuse cpufreq_ondemand
powernow_k8 freq_table usbhid hid ide_pci_generic edac_core 8250_pnp
k10temp r8169 hwmon rtc_cmos rtc_core rtc_lib 8250 sg mii serial_core
unix
[64112.502507]
[64112.502507] Pid: 0, comm: swapper Not tainted 2.6.34 #3
M3A790GXH/128M/To Be Filled By O.E.M.
[64112.502507] RIP: 0010:[<ffffffff810303fe>] [<ffffffff810303fe>]
pick_next_task_fair+0x4e/0x130
[64112.502507] RSP: 0018:ffff88010060b308 EFLAGS: 00010046
[64112.502507] RAX: ffff88010060b308 RBX: ffff88010060b2f8 RCX:
0000000000000000
[64112.502507] RDX: ffff88010060b2f8 RSI: ffff88021fc64140 RDI:
0000000000000000
[64112.502507] RBP: ffff88010060b2f8 R08: 0000000000000000 R09:
00000000ffffffff
[64112.502507] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[64112.502507] R13: 00000000019129c0 R14: 0000000000000000 R15:
0000000000000002
[64112.502507] FS: 00007ffb68af7910(0000) GS:ffff880001900000(0000)
knlGS:0000000000000000
[64112.502507] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[64112.502507] CR2: 0000000001912178 CR3: 000000018d37b000 CR4:
00000000000006e0
[64112.502507] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[64112.502507] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[64112.502507] Process swapper (pid: 0, threadinfo ffff88021fc92000,
task ffff88021fc64140)
[64112.502507] Stack:
[64112.502507] 00000000000120c0 ffff8800019120c0 0000000000000002
0000000000000000
[64112.502507] <0> ffff88021fc644c8 ffffffff8132dca0 0000000000000000
0000000000004000
[64112.502507] <0> ffff88021fc93fd8 ffff88021fc93fd8 ffff88021fc64140
00000000000120c0
[64112.502507] Call Trace:
[64112.502507] [<ffffffff8132dca0>] ? schedule+0x630/0x890
[64112.502507] [<ffffffff810015ae>] ? cpu_idle+0x2e/0x90
[64112.502507] Code: 8b bf b0 00 00 00 31 ed 48 8d 50 f0 48 85 c0 48 0f
45 ea 48 85 ff 74 10 48 89 ee e8 8d d3 ff ff 85 c0 0f 8e c5 00 00 00 48
89 eb <49> 8b bd b8 00 00 00 48 85 ff 74 10 48 89 ee e8 6e d3 ff ff 85
[64112.502507] RIP [<ffffffff810303fe>] pick_next_task_fair+0x4e/0x130
[64112.502507] RSP <ffff88021fc93e58>
[64112.502507] CR2: 0000000001912178
[64112.502507] ---[ end trace 21311dbab0670ec5 ]---
[64112.502507] Kernel panic - not syncing: Attempted to kill the idle
task!
[64112.502507] Pid: 0, comm: swapper Tainted: G D 2.6.34 #3
[64112.502507] Call Trace:
[64112.502507] [<ffffffff8132d15f>] ? panic+0x85/0xff
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? printk+0x4e/0x57
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? do_exit+0x60a/0x7a0
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? bit_cursor+0x0/0x620
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? up+0x16/0x50
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? kmsg_dump+0x7d/0x140
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? oops_end+0x95/0xa0
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? no_context+0xf8/0x260
[64112.502507] [<xxxxxxxxxxxxxxxx>] ?
__bad_area_nosemaphore+0x14d/0x220
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? enqueue_task_fair+0x184/0x2c0
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? enqueue_task+0x56/0x60
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? activate_task+0x56/0x30
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? cpumask_next_and+0x23/0x40
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? do_page_fault+0x28e/0x390
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? page_fault+0x1f/0x30
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? pick_next_task_fair+0x4e/0x130
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? finish_task_switch+0x34/0xc0
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? schedule+0x630/0x890
[64112.502507] [<xxxxxxxxxxxxxxxx>] ? cpu_idle+0x2e/0x90
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2011-03-27 17:52 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-05-05 22:33 BUG: unable to handle kernel paging request thomas
2008-05-07 6:55 ` Andrew Morton
2010-05-23 16:29 Markus
2010-05-23 18:38 ` Borislav Petkov
2010-05-23 20:44 ` Markus
2010-05-23 21:17 ` Borislav Petkov
2010-05-23 21:48 ` Markus
2010-05-24 11:44 ` Markus
2010-05-25 13:09 ` Markus
2010-05-25 14:31 ` Borislav Petkov
2010-05-25 14:54 ` Markus
2010-05-31 1:24 Thomas Fjellstrom
2011-03-27 9:16 Anca Emanuel
2011-03-27 15:37 ` Linus Torvalds
2011-03-27 16:00 ` Américo Wang
2011-03-27 17:44 ` Anca Emanuel
2011-03-27 17:52 ` Stephen Wilson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).