[patch 0/4] Cpu alloc V6: Replace percpu allocator in modules.c

[patch 0/4] Cpu alloc V6: Replace percpu allocator in modules.c

[Christoph Lameter]

Just do the bare mininum to establish a per cpu allocator. Later patchsets
will gradually build out the functionality.

The most critical issue that came up awhile back was how to configure
the size of the percpu area. Here we simply use a kernel parameter and use
the static size of the existing percpu allocator for modules as a default.

The effect of this patchset is to make the size of percpu data for modules
configurable. Its no longer fixed at 8000 bytes.

Changes:
V5->V6:
- Fix various issues in the per cpu alloc
- Make percpu reserve not depend on CONFIG_MODULES.

V4->V5:
- Fix various things pointed out by Pekka.
- Remove page alignment check from module.c and put it into cpu_alloc.c

V3->V4:
- Gut patches to the bare essentials: Only replace modules.c percpu alloocator
- Make percpu reserve area configurable via a kernel parameter


-- 

[patch 1/4] Make the per cpu reserve configurable

[Christoph Lameter]

[-- Attachment #1: cpu_alloc_configurable_percpu --]
[-- Type: text/plain, Size: 2988 bytes --]

The per cpu reserve from which loadable modules allocate their percpu sections
is currently fixed at 8000 bytes.

Add a new kernel parameter

	percpu=<dynamically allocatable percpu bytes>

The per cpu reserve area will be used in following patches by the
per cpu allocator.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>

---
 arch/ia64/include/asm/percpu.h |    1 +
 include/linux/percpu.h         |    7 ++++++-
 init/main.c                    |   13 +++++++++++++
 3 files changed, 20 insertions(+), 1 deletion(-)

Index: linux-2.6/include/linux/percpu.h
===================================================================
--- linux-2.6.orig/include/linux/percpu.h	2008-09-25 08:39:19.000000000 -0500
+++ linux-2.6/include/linux/percpu.h	2008-09-29 13:08:25.000000000 -0500
@@ -34,6 +34,7 @@
 #define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
 #define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
 
+extern unsigned int percpu_reserve;
 /* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
 #ifndef PERCPU_ENOUGH_ROOM
 #ifdef CONFIG_MODULES
@@ -43,7 +44,7 @@
 #endif
 
 #define PERCPU_ENOUGH_ROOM						\
-	(__per_cpu_end - __per_cpu_start + PERCPU_MODULE_RESERVE)
+	(__per_cpu_end - __per_cpu_start + percpu_reserve)
 #endif	/* PERCPU_ENOUGH_ROOM */
 
 /*
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c	2008-09-25 08:39:19.000000000 -0500
+++ linux-2.6/init/main.c	2008-09-29 13:09:13.000000000 -0500
@@ -253,6 +253,16 @@
 
 early_param("loglevel", loglevel);
 
+unsigned int percpu_reserve = PERCPU_MODULE_RESERVE;
+
+static int __init init_percpu_reserve(char *str)
+{
+	get_option(&str, &percpu_reserve);
+	return 0;
+}
+
+early_param("percpu", init_percpu_reserve);
+
 /*
  * Unknown boot options get handed to init, unless they look like
  * failed parameters
@@ -397,6 +407,9 @@
 
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
+	printk(KERN_INFO "percpu area: %d bytes total, %d available.\n",
+			size, size - (__per_cpu_end - __per_cpu_start));
+
 	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
 
 	for_each_possible_cpu(i) {
Index: linux-2.6/Documentation/kernel-parameters.txt
===================================================================
--- linux-2.6.orig/Documentation/kernel-parameters.txt	2008-09-25 08:39:19.000000000 -0500
+++ linux-2.6/Documentation/kernel-parameters.txt	2008-09-29 13:05:36.000000000 -0500
@@ -1643,6 +1643,13 @@
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu=		Configure the number of percpu bytes that can be
+			dynamically allocated. This is used for per cpu
+			variables of modules and other dynamic per cpu data
+			structures. Creation of per cpu structures after boot
+			may fail if this is set too low.
+			Default is 8000 bytes.
+
 	pf.		[PARIDE]
 			See Documentation/paride.txt.
 

-- 

[patch 2/4] percpu: Rename variables PERCPU_ENOUGH_ROOM -> PERCPU_AREA_SIZE

[Christoph Lameter]

[-- Attachment #1: cpu_alloc_rename --]
[-- Type: text/plain, Size: 6131 bytes --]

Rename PERCPU_ENOUGH_ROOM to PERCPU_AREA_SIZE since its really specifying the
size of the percpu areas.

Rename PERCPU_MODULE_RESERVE to PERCPU_RESERVE_SIZE in anticipation of more
general use of that reserve.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>

---
 arch/ia64/include/asm/percpu.h |    2 +-
 arch/powerpc/kernel/setup_64.c |    4 ++--
 arch/sparc64/kernel/smp.c      |    2 +-
 arch/x86/kernel/setup_percpu.c |    3 +--
 include/linux/percpu.h         |   10 +++++-----
 init/main.c                    |    4 ++--
 kernel/lockdep.c               |    2 +-
 kernel/module.c                |    2 +-
 8 files changed, 14 insertions(+), 15 deletions(-)

Index: linux-2.6/arch/ia64/include/asm/percpu.h
===================================================================
--- linux-2.6.orig/arch/ia64/include/asm/percpu.h	2008-09-16 18:20:19.000000000 -0700
+++ linux-2.6/arch/ia64/include/asm/percpu.h	2008-09-16 18:27:10.000000000 -0700
@@ -6,7 +6,7 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
-#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
+#define PERCPU_AREA_SIZE PERCPU_PAGE_SIZE
 
 #ifdef __ASSEMBLY__
 # define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
Index: linux-2.6/include/linux/percpu.h
===================================================================
--- linux-2.6.orig/include/linux/percpu.h	2008-09-16 18:25:38.000000000 -0700
+++ linux-2.6/include/linux/percpu.h	2008-09-16 18:28:55.000000000 -0700
@@ -36,16 +36,16 @@
 
 extern unsigned int percpu_reserve;
 /* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
-#ifndef PERCPU_ENOUGH_ROOM
+#ifndef PERCPU_AREA_SIZE
 #ifdef CONFIG_MODULES
-#define PERCPU_MODULE_RESERVE	8192
+#define PERCPU_RESERVE_SIZE	8192
 #else
-#define PERCPU_MODULE_RESERVE	0
+#define PERCPU_RESERVE_SIZE	0
 #endif
 
-#define PERCPU_ENOUGH_ROOM						\
+#define PERCPU_AREA_SIZE						\
 	(__per_cpu_end - __per_cpu_start + percpu_reserve)
-#endif	/* PERCPU_ENOUGH_ROOM */
+#endif	/* PERCPU_AREA_SIZE */
 
 /*
  * Must be an lvalue. Since @var must be a simple identifier,
Index: linux-2.6/arch/powerpc/kernel/setup_64.c
===================================================================
--- linux-2.6.orig/arch/powerpc/kernel/setup_64.c	2008-09-16 18:13:45.000000000 -0700
+++ linux-2.6/arch/powerpc/kernel/setup_64.c	2008-09-16 18:25:43.000000000 -0700
@@ -599,8 +599,8 @@ void __init setup_per_cpu_areas(void)
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
 #ifdef CONFIG_MODULES
-	if (size < PERCPU_ENOUGH_ROOM)
-		size = PERCPU_ENOUGH_ROOM;
+	if (size < PERCPU_AREA_SIZE)
+		size = PERCPU_AREA_SIZE;
 #endif
 
 	for_each_possible_cpu(i) {
Index: linux-2.6/arch/sparc64/kernel/smp.c
===================================================================
--- linux-2.6.orig/arch/sparc64/kernel/smp.c	2008-09-16 18:13:45.000000000 -0700
+++ linux-2.6/arch/sparc64/kernel/smp.c	2008-09-16 18:25:43.000000000 -0700
@@ -1386,7 +1386,7 @@ void __init real_setup_per_cpu_areas(voi
 	char *ptr;
 
 	/* Copy section for each CPU (we discard the original) */
-	goal = PERCPU_ENOUGH_ROOM;
+	goal = PERCPU_AREA_SIZE;
 
 	__per_cpu_shift = PAGE_SHIFT;
 	for (size = PAGE_SIZE; size < goal; size <<= 1UL)
Index: linux-2.6/arch/x86/kernel/setup_percpu.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_percpu.c	2008-09-16 18:13:45.000000000 -0700
+++ linux-2.6/arch/x86/kernel/setup_percpu.c	2008-09-16 18:25:43.000000000 -0700
@@ -140,7 +140,7 @@ static void __init setup_cpu_pda_map(voi
  */
 void __init setup_per_cpu_areas(void)
 {
-	ssize_t size = PERCPU_ENOUGH_ROOM;
+	ssize_t size = PERCPU_AREA_SIZE;
 	char *ptr;
 	int cpu;
 
@@ -148,7 +148,6 @@ void __init setup_per_cpu_areas(void)
 	setup_cpu_pda_map();
 
 	/* Copy section for each CPU (we discard the original) */
-	size = PERCPU_ENOUGH_ROOM;
 	printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
 			  size);
 
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c	2008-09-16 18:25:38.000000000 -0700
+++ linux-2.6/init/main.c	2008-09-16 18:29:40.000000000 -0700
@@ -253,7 +253,7 @@ static int __init loglevel(char *str)
 
 early_param("loglevel", loglevel);
 
-unsigned int percpu_reserve = PERCPU_MODULE_RESERVE;
+unsigned int percpu_reserve = PERCPU_RESERVE_SIZE;
 
 static int __init init_percpu_reserve(char *str)
 {
@@ -406,7 +406,7 @@ static void __init setup_per_cpu_areas(v
 	unsigned long nr_possible_cpus = num_possible_cpus();
 
 	/* Copy section for each CPU (we discard the original) */
-	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
+	size = ALIGN(PERCPU_AREA_SIZE, PAGE_SIZE);
 	printk(KERN_INFO "percpu area: %d bytes total, %d available.\n",
 			size, size - (__per_cpu_end - __per_cpu_start));
 
Index: linux-2.6/kernel/lockdep.c
===================================================================
--- linux-2.6.orig/kernel/lockdep.c	2008-09-16 18:13:45.000000000 -0700
+++ linux-2.6/kernel/lockdep.c	2008-09-16 18:25:43.000000000 -0700
@@ -639,7 +639,7 @@ static int static_obj(void *obj)
 	 */
 	for_each_possible_cpu(i) {
 		start = (unsigned long) &__per_cpu_start + per_cpu_offset(i);
-		end   = (unsigned long) &__per_cpu_start + PERCPU_ENOUGH_ROOM
+		end   = (unsigned long) &__per_cpu_start + PERCPU_AREA_SIZE
 					+ per_cpu_offset(i);
 
 		if ((addr >= start) && (addr < end))
Index: linux-2.6/kernel/module.c
===================================================================
--- linux-2.6.orig/kernel/module.c	2008-09-16 18:13:45.000000000 -0700
+++ linux-2.6/kernel/module.c	2008-09-16 18:25:43.000000000 -0700
@@ -476,7 +476,7 @@ static int percpu_modinit(void)
 	/* Static in-kernel percpu data (used). */
 	pcpu_size[0] = -(__per_cpu_end-__per_cpu_start);
 	/* Free room. */
-	pcpu_size[1] = PERCPU_ENOUGH_ROOM + pcpu_size[0];
+	pcpu_size[1] = PERCPU_AREA_SIZE + pcpu_size[0];
 	if (pcpu_size[1] < 0) {
 		printk(KERN_ERR "No per-cpu room for modules.\n");
 		pcpu_num_used = 1;

-- 

[patch 3/4] cpu alloc: The allocator

[Christoph Lameter]

[-- Attachment #1: cpu_alloc_base --]
[-- Type: text/plain, Size: 10129 bytes --]

The per cpu allocator allows dynamic allocation of memory on all
processors simultaneously. A bitmap is used to track used areas.
The allocator implements tight packing to reduce the cache footprint
and increase speed since cacheline contention is typically not a concern
for memory mainly used by a single cpu. Small objects will fill up gaps
left by larger allocations that required alignments.

The size of the cpu_alloc area can be changed via the percpu=xxx
kernel parameter.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>

---
 include/linux/percpu.h |   46 ++++++++++++
 include/linux/vmstat.h |    2 
 mm/Makefile            |    2 
 mm/cpu_alloc.c         |  181 +++++++++++++++++++++++++++++++++++++++++++++++++
 mm/vmstat.c            |    1 
 5 files changed, 230 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/cpu_alloc.h
 create mode 100644 mm/cpu_alloc.c

Index: linux-2.6/include/linux/vmstat.h
===================================================================
--- linux-2.6.orig/include/linux/vmstat.h	2008-09-29 13:08:23.000000000 -0500
+++ linux-2.6/include/linux/vmstat.h	2008-09-29 13:09:33.000000000 -0500
@@ -37,7 +37,7 @@
 		FOR_ALL_ZONES(PGSCAN_KSWAPD),
 		FOR_ALL_ZONES(PGSCAN_DIRECT),
 		PGINODESTEAL, SLABS_SCANNED, KSWAPD_STEAL, KSWAPD_INODESTEAL,
-		PAGEOUTRUN, ALLOCSTALL, PGROTATED,
+		PAGEOUTRUN, ALLOCSTALL, PGROTATED, CPU_BYTES,
 #ifdef CONFIG_HUGETLB_PAGE
 		HTLB_BUDDY_PGALLOC, HTLB_BUDDY_PGALLOC_FAIL,
 #endif
Index: linux-2.6/mm/Makefile
===================================================================
--- linux-2.6.orig/mm/Makefile	2008-09-29 13:08:23.000000000 -0500
+++ linux-2.6/mm/Makefile	2008-09-29 13:09:33.000000000 -0500
@@ -11,7 +11,7 @@
 			   maccess.o page_alloc.o page-writeback.o pdflush.o \
 			   readahead.o swap.o truncate.o vmscan.o \
 			   prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
-			   page_isolation.o mm_init.o $(mmu-y)
+			   page_isolation.o mm_init.o cpu_alloc.o $(mmu-y)
 
 obj-$(CONFIG_PROC_PAGE_MONITOR) += pagewalk.o
 obj-$(CONFIG_BOUNCE)	+= bounce.o
Index: linux-2.6/mm/cpu_alloc.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6/mm/cpu_alloc.c	2008-09-29 13:09:33.000000000 -0500
@@ -0,0 +1,185 @@
+/*
+ * Cpu allocator - Manage objects allocated for each processor
+ *
+ * (C) 2008 SGI, Christoph Lameter <cl@linux-foundation.org>
+ * 	Basic implementation with allocation and free from a dedicated per
+ * 	cpu area.
+ *
+ * The per cpu allocator allows a dynamic allocation of a piece of memory on
+ * every processor. A bitmap is used to track used areas.
+ * The allocator implements tight packing to reduce the cache footprint
+ * and increase speed since cacheline contention is typically not a concern
+ * for memory mainly used by a single cpu. Small objects will fill up gaps
+ * left by larger allocations that required alignments.
+ */
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <linux/bitmap.h>
+#include <asm/sections.h>
+#include <linux/bootmem.h>
+
+/*
+ * Basic allocation unit. A bit map is created to track the use of each
+ * UNIT_SIZE element in the cpu area.
+ */
+#define UNIT_TYPE int
+#define UNIT_SIZE sizeof(UNIT_TYPE)
+
+int units;	/* Actual available units */
+
+/*
+ * How many units are needed for an object of a given size
+ */
+static int size_to_units(unsigned long size)
+{
+	return DIV_ROUND_UP(size, UNIT_SIZE);
+}
+
+/*
+ * Lock to protect the bitmap and the meta data for the cpu allocator.
+ */
+static DEFINE_SPINLOCK(cpu_alloc_map_lock);
+static unsigned long *cpu_alloc_map;
+static int nr_units;		/* Number of available units */
+static int first_free;		/* First known free unit */
+
+/*
+ * Mark an object as used in the cpu_alloc_map
+ *
+ * Must hold cpu_alloc_map_lock
+ */
+static void set_map(int start, int length)
+{
+	while (length-- > 0)
+		__set_bit(start++, cpu_alloc_map);
+}
+
+/*
+ * Mark an area as freed.
+ *
+ * Must hold cpu_alloc_map_lock
+ */
+static void clear_map(int start, int length)
+{
+	while (length-- > 0)
+		__clear_bit(start++, cpu_alloc_map);
+}
+
+/*
+ * Allocate an object of a certain size
+ *
+ * Returns a special pointer that can be used with CPU_PTR to find the
+ * address of the object for a certain cpu.
+ */
+void *cpu_alloc(unsigned long size, gfp_t gfpflags, unsigned long align)
+{
+	unsigned long start;
+	int units = size_to_units(size);
+	void *ptr;
+	int first;
+	unsigned long flags;
+
+	if (!size)
+		return ZERO_SIZE_PTR;
+
+	WARN_ON(align > PAGE_SIZE);
+
+	if (align < UNIT_SIZE)
+		align = UNIT_SIZE;
+
+	spin_lock_irqsave(&cpu_alloc_map_lock, flags);
+
+	first = 1;
+	start = first_free;
+
+	for ( ; ; ) {
+
+		start = find_next_zero_bit(cpu_alloc_map, nr_units, start);
+		if (start >= nr_units)
+			goto out_of_memory;
+
+		if (first)
+			first_free = start;
+
+		/*
+		 * Check alignment and that there is enough space after
+		 * the starting unit.
+		 */
+		if (start % (align / UNIT_SIZE) == 0 &&
+			find_next_bit(cpu_alloc_map, nr_units, start + 1)
+					>= start + units)
+				break;
+		start++;
+		first = 0;
+	}
+
+	if (first)
+		first_free = start + units;
+
+	if (start + units > nr_units)
+		goto out_of_memory;
+
+	set_map(start, units);
+	__count_vm_events(CPU_BYTES, units * UNIT_SIZE);
+
+	spin_unlock_irqrestore(&cpu_alloc_map_lock, flags);
+
+	ptr = (int *)__per_cpu_end + start;
+
+	if (gfpflags & __GFP_ZERO) {
+		int cpu;
+
+		for_each_possible_cpu(cpu)
+			memset(CPU_PTR(ptr, cpu), 0, size);
+	}
+
+	return ptr;
+
+out_of_memory:
+	spin_unlock_irqrestore(&cpu_alloc_map_lock, flags);
+	return NULL;
+}
+EXPORT_SYMBOL(cpu_alloc);
+
+/*
+ * Free an object. The pointer must be a cpu pointer allocated
+ * via cpu_alloc.
+ */
+void cpu_free(void *start, unsigned long size)
+{
+	unsigned long units = size_to_units(size);
+	unsigned long index = (int *)start - (int *)__per_cpu_end;
+	unsigned long flags;
+
+	if (!start || start == ZERO_SIZE_PTR)
+		return;
+
+	if (WARN_ON(index >= nr_units))
+		return;
+
+	if (WARN_ON(!test_bit(index, cpu_alloc_map) ||
+		!test_bit(index + units - 1, cpu_alloc_map)))
+			return;
+
+	spin_lock_irqsave(&cpu_alloc_map_lock, flags);
+
+	clear_map(index, units);
+	__count_vm_events(CPU_BYTES, -units * UNIT_SIZE);
+
+	if (index < first_free)
+		first_free = index;
+
+	spin_unlock_irqrestore(&cpu_alloc_map_lock, flags);
+}
+EXPORT_SYMBOL(cpu_free);
+
+
+void __init cpu_alloc_init(void)
+{
+	nr_units = percpu_reserve / UNIT_SIZE;
+
+	cpu_alloc_map = alloc_bootmem(BITS_TO_LONGS(nr_units));
+}
+
Index: linux-2.6/mm/vmstat.c
===================================================================
--- linux-2.6.orig/mm/vmstat.c	2008-09-29 13:08:23.000000000 -0500
+++ linux-2.6/mm/vmstat.c	2008-09-29 13:09:33.000000000 -0500
@@ -671,6 +671,7 @@
 	"allocstall",
 
 	"pgrotated",
+	"cpu_bytes",
 #ifdef CONFIG_HUGETLB_PAGE
 	"htlb_buddy_alloc_success",
 	"htlb_buddy_alloc_fail",
Index: linux-2.6/include/linux/percpu.h
===================================================================
--- linux-2.6.orig/include/linux/percpu.h	2008-09-29 13:09:29.000000000 -0500
+++ linux-2.6/include/linux/percpu.h	2008-09-29 13:09:33.000000000 -0500
@@ -107,4 +107,50 @@
 #define free_percpu(ptr)	percpu_free((ptr))
 #define per_cpu_ptr(ptr, cpu)	percpu_ptr((ptr), (cpu))
 
+
+/*
+ * cpu allocator definitions
+ *
+ * The cpu allocator allows allocating an instance of an object for each
+ * processor and the use of a single pointer to access all instances
+ * of the object. cpu_alloc provides optimized means for accessing the
+ * instance of the object belonging to the currently executing processor
+ * as well as special atomic operations on fields of objects of the
+ * currently executing processor.
+ *
+ * Cpu objects are typically small. The allocator packs them tightly
+ * to increase the chance on each access that a per cpu object is already
+ * cached. Alignments may be specified but the intent is to align the data
+ * properly due to cpu alignment constraints and not to avoid cacheline
+ * contention. Any holes left by aligning objects are filled up with smaller
+ * objects that are allocated later.
+ *
+ * Cpu data can be allocated using CPU_ALLOC. The resulting pointer is
+ * pointing to the instance of the variable in the per cpu area provided
+ * by the loader. It is generally an error to use the pointer directly
+ * unless we are booting the system.
+ *
+ * __GFP_ZERO may be passed as a flag to zero the allocated memory.
+ */
+
+/* Return a pointer to the instance of a object for a particular processor */
+#define CPU_PTR(__p, __cpu)	SHIFT_PERCPU_PTR((__p), per_cpu_offset(__cpu))
+
+/*
+ * Return a pointer to the instance of the object belonging to the processor
+ * running the current code.
+ */
+#define THIS_CPU(__p)	SHIFT_PERCPU_PTR((__p), my_cpu_offset)
+#define __THIS_CPU(__p)	SHIFT_PERCPU_PTR((__p), __my_cpu_offset)
+
+#define CPU_ALLOC(type, flags)	((typeof(type) *)cpu_alloc(sizeof(type), (flags), \
+							__alignof__(type)))
+#define CPU_FREE(pointer)	cpu_free((pointer), sizeof(*(pointer)))
+
+/*
+ * Raw calls
+ */
+void *cpu_alloc(unsigned long size, gfp_t flags, unsigned long align);
+void cpu_free(void *cpu_pointer, unsigned long size);
+
 #endif /* __LINUX_PERCPU_H */
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c	2008-09-29 13:09:30.000000000 -0500
+++ linux-2.6/init/main.c	2008-09-29 13:09:33.000000000 -0500
@@ -115,6 +115,7 @@
 /* Default late time init is NULL. archs can override this later. */
 void (*late_time_init)(void);
 extern void softirq_init(void);
+extern void cpu_alloc_init(void);
 
 /* Untouched command line saved by arch-specific code. */
 char __initdata boot_command_line[COMMAND_LINE_SIZE];
@@ -583,6 +587,7 @@
 	mm_init_owner(&init_mm, &init_task);
 	setup_command_line(command_line);
 	unwind_setup();
+	cpu_alloc_init();
 	setup_per_cpu_areas();
 	setup_nr_cpu_ids();
 	smp_prepare_boot_cpu();	/* arch-specific boot-cpu hooks */

-- 

Re: [patch 3/4] cpu alloc: The allocator

[Pekka Enberg]

On Mon, 2008-09-29 at 12:35 -0700, Christoph Lameter wrote:
> Index: linux-2.6/mm/cpu_alloc.c
> ===================================================================
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ linux-2.6/mm/cpu_alloc.c	2008-09-29 13:09:33.000000000 -0500
> @@ -0,0 +1,185 @@
> +/*
> + * Cpu allocator - Manage objects allocated for each processor
> + *
> + * (C) 2008 SGI, Christoph Lameter <cl@linux-foundation.org>
> + * 	Basic implementation with allocation and free from a dedicated per
> + * 	cpu area.
> + *
> + * The per cpu allocator allows a dynamic allocation of a piece of memory on
> + * every processor. A bitmap is used to track used areas.
> + * The allocator implements tight packing to reduce the cache footprint
> + * and increase speed since cacheline contention is typically not a concern
> + * for memory mainly used by a single cpu. Small objects will fill up gaps
> + * left by larger allocations that required alignments.
> + */
> +#include <linux/mm.h>
> +#include <linux/mmzone.h>
> +#include <linux/module.h>
> +#include <linux/percpu.h>
> +#include <linux/bitmap.h>
> +#include <asm/sections.h>
> +#include <linux/bootmem.h>
> +
> +/*
> + * Basic allocation unit. A bit map is created to track the use of each
> + * UNIT_SIZE element in the cpu area.
> + */
> +#define UNIT_TYPE int
> +#define UNIT_SIZE sizeof(UNIT_TYPE)
> +
> +int units;	/* Actual available units */

What is this thing? Otherwise looks good to me.

Re: [patch 3/4] cpu alloc: The allocator

[Christoph Lameter]

Pekka Enberg wrote:

>> +/*
>> + * Basic allocation unit. A bit map is created to track the use of each
>> + * UNIT_SIZE element in the cpu area.
>> + */
>> +#define UNIT_TYPE int
>> +#define UNIT_SIZE sizeof(UNIT_TYPE)
>> +
>> +int units;	/* Actual available units */
> 
> What is this thing? Otherwise looks good to me.

This is the number of units available from the cpu allocator. Its determined
on bootup and the bitmap is sized correspondingly.

Re: [patch 3/4] cpu alloc: The allocator

[Pekka Enberg]

On Tue, 2008-09-30 at 06:38 -0500, Christoph Lameter wrote:
> Pekka Enberg wrote:
> 
> >> +/*
> >> + * Basic allocation unit. A bit map is created to track the use of each
> >> + * UNIT_SIZE element in the cpu area.
> >> + */
> >> +#define UNIT_TYPE int
> >> +#define UNIT_SIZE sizeof(UNIT_TYPE)
> >> +
> >> +int units;	/* Actual available units */
> > 
> > What is this thing? Otherwise looks good to me.
> 
> This is the number of units available from the cpu allocator. Its determined
> on bootup and the bitmap is sized correspondingly.

I think you're confusing it to "nr_units" or, alternatively, I need new
glasses.

Re: [patch 3/4] cpu alloc: The allocator

[Christoph Lameter]

Pekka Enberg wrote:
> 
> I think you're confusing it to "nr_units" or, alternatively, I need new
> glasses.
> 

You are right. units is debri from earlier revs and has no function today.


Subject: cpu_alloc: Remove useless variable

The "units" variable is a leftover and has no function at this point.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>

Index: linux-2.6/mm/cpu_alloc.c
===================================================================
--- linux-2.6.orig/mm/cpu_alloc.c	2008-09-30 07:09:09.000000000 -0500
+++ linux-2.6/mm/cpu_alloc.c	2008-09-30 07:10:20.000000000 -0500
@@ -27,8 +27,6 @@
 #define UNIT_TYPE int
 #define UNIT_SIZE sizeof(UNIT_TYPE)

-int units;	/* Actual available units */
-
 /*
  * How many units are needed for an object of a given size
  */

Re: [patch 3/4] cpu alloc: The allocator

[Andrew Morton]

On Mon, 29 Sep 2008 12:35:03 -0700 Christoph Lameter <cl@linux-foundation.org> wrote:

> The per cpu allocator allows dynamic allocation of memory on all
> processors simultaneously. A bitmap is used to track used areas.
> The allocator implements tight packing to reduce the cache footprint
> and increase speed since cacheline contention is typically not a concern
> for memory mainly used by a single cpu. Small objects will fill up gaps
> left by larger allocations that required alignments.
> 
> The size of the cpu_alloc area can be changed via the percpu=xxx
> kernel parameter.
> 
>
> ...
>
> +static void set_map(int start, int length)
> +{
> +	while (length-- > 0)
> +		__set_bit(start++, cpu_alloc_map);
> +}

Can we use bitmap_fill() here?

> +/*
> + * Mark an area as freed.
> + *
> + * Must hold cpu_alloc_map_lock
> + */
> +static void clear_map(int start, int length)
> +{
> +	while (length-- > 0)
> +		__clear_bit(start++, cpu_alloc_map);
> +}

And bitmap_etc().  We have a pretty complete suite there.

> +/*
> + * Allocate an object of a certain size
> + *
> + * Returns a special pointer that can be used with CPU_PTR to find the
> + * address of the object for a certain cpu.
> + */
> +void *cpu_alloc(unsigned long size, gfp_t gfpflags, unsigned long align)
> +{
> +	unsigned long start;
> +	int units = size_to_units(size);
> +	void *ptr;
> +	int first;
> +	unsigned long flags;
> +
> +	if (!size)
> +		return ZERO_SIZE_PTR;
> +
> +	WARN_ON(align > PAGE_SIZE);
> +
> +	if (align < UNIT_SIZE)
> +		align = UNIT_SIZE;
> +
> +	spin_lock_irqsave(&cpu_alloc_map_lock, flags);
> +
> +	first = 1;
> +	start = first_free;
> +
> +	for ( ; ; ) {
> +
> +		start = find_next_zero_bit(cpu_alloc_map, nr_units, start);
> +		if (start >= nr_units)
> +			goto out_of_memory;
> +
> +		if (first)
> +			first_free = start;
> +
> +		/*
> +		 * Check alignment and that there is enough space after
> +		 * the starting unit.
> +		 */
> +		if (start % (align / UNIT_SIZE) == 0 &&
> +			find_next_bit(cpu_alloc_map, nr_units, start + 1)
> +					>= start + units)
> +				break;
> +		start++;
> +		first = 0;
> +	}

Might be able to use bitmap_find_free_region() here, if we try hard enough.

But as a general thing, it would be better to add any missing
functionality to the bitmap API and then to use the bitmap API
consistently, rather than partly using it, or ignoring it altogether.

> +	if (first)
> +		first_free = start + units;
> +
> +	if (start + units > nr_units)
> +		goto out_of_memory;
> +
> +	set_map(start, units);
> +	__count_vm_events(CPU_BYTES, units * UNIT_SIZE);
> +
> +	spin_unlock_irqrestore(&cpu_alloc_map_lock, flags);
> +
> +	ptr = (int *)__per_cpu_end + start;
> +
> +	if (gfpflags & __GFP_ZERO) {
> +		int cpu;
> +
> +		for_each_possible_cpu(cpu)
> +			memset(CPU_PTR(ptr, cpu), 0, size);
> +	}
> +
> +	return ptr;
> +
> +out_of_memory:
> +	spin_unlock_irqrestore(&cpu_alloc_map_lock, flags);
> +	return NULL;
> +}
> +EXPORT_SYMBOL(cpu_alloc);
> +

Apart from that the interface, intent and implementation seem reasonable.

But I'd have though that it would be possible to only allocate the
storage for online CPUs.  That would be a pretty significant win for
some system configurations?

Re: [patch 3/4] cpu alloc: The allocator

[Pekka Enberg]

Hi Andrew,

On Fri, 2008-10-03 at 00:33 -0700, Andrew Morton wrote:
> > +static void set_map(int start, int length)
> > +{
> > +	while (length-- > 0)
> > +		__set_bit(start++, cpu_alloc_map);
> > +}
> 
> Can we use bitmap_fill() here?

But bitmap_fill() assumes that the starting offset is aligned to
unsigned long (which is not the case here), doesn't it?

On Fri, 2008-10-03 at 00:33 -0700, Andrew Morton wrote:
> But I'd have though that it would be possible to only allocate the
> storage for online CPUs.  That would be a pretty significant win for
> some system configurations?

Maybe, but then you'd have to deal with CPU hotplug... iik.

		Pekka

Re: [patch 3/4] cpu alloc: The allocator

[Andrew Morton]

On Fri, 03 Oct 2008 10:43:31 +0300 Pekka Enberg <penberg@cs.helsinki.fi> wrote:

> Hi Andrew,
> 
> On Fri, 2008-10-03 at 00:33 -0700, Andrew Morton wrote:
> > > +static void set_map(int start, int length)
> > > +{
> > > +	while (length-- > 0)
> > > +		__set_bit(start++, cpu_alloc_map);
> > > +}
> > 
> > Can we use bitmap_fill() here?
> 
> But bitmap_fill() assumes that the starting offset is aligned to
> unsigned long (which is not the case here), doesn't it?

umm, yeah, the whole bitmap interface is busted from that POV.

> ___On Fri, 2008-10-03 at 00:33 -0700, Andrew Morton wrote:
> > But I'd have though that it would be possible to only allocate the
> > storage for online CPUs.  That would be a pretty significant win for
> > some system configurations?
> 
> Maybe, but then you'd have to deal with CPU hotplug... iik.

Of course.

Re: [patch 3/4] cpu alloc: The allocator

[Christoph Lameter]

Andrew Morton wrote:
>
> umm, yeah, the whole bitmap interface is busted from that POV.


Yup cannot find equivalent bitmap operations for cpu_alloc.

Also the search operations already use find_next_zero_bit() and
find_next_bit(). So this should be okay.

We could define new bitops:

bitmap_set_range(dst, start, end)
bitmap_clear_range(dst, start, end)

int find_zero_bits(dst, start, end, nr_of_zero_bits)

but then there are additional alignment requirements that such a generic
function would not be able to check for.

Re: [patch 3/4] cpu alloc: The allocator

[Christoph Lameter]

Andrew Morton wrote:

> And bitmap_etc().  We have a pretty complete suite there.

ok will use bitops here.

 > Apart from that the interface, intent and implementation seem reasonable.
> 
> But I'd have though that it would be possible to only allocate the
> storage for online CPUs.  That would be a pretty significant win for
> some system configurations?

We  have tried that but currently the kernel (core and in particular arch
code) keeps state for all possible cpus in percpu segments. Would require more
extensive cleanup of numerous arches to do.

Re: [patch 3/4] cpu alloc: The allocator

[Rusty Russell]

On Friday 03 October 2008 22:48:32 Christoph Lameter wrote:
> Andrew Morton wrote:
> > But I'd have though that it would be possible to only allocate the
> > storage for online CPUs.  That would be a pretty significant win for
> > some system configurations?
>
> We  have tried that but currently the kernel (core and in particular arch
> code) keeps state for all possible cpus in percpu segments. Would require
> more extensive cleanup of numerous arches to do.

It shouldn't be a big win, since possible ~= online for most systems.  And 
having all the per-cpu users register online and offline cpu callbacks is 
error prone and a PITA.

Rusty.

Re: [patch 3/4] cpu alloc: The allocator

[Christoph Lameter]

Rusty Russell wrote:

> It shouldn't be a big win, since possible ~= online for most systems.  And 
> having all the per-cpu users register online and offline cpu callbacks is 
> error prone and a PITA.

That also has the nice consequence that moving the allocators (page allocator
/ slub) to the use of cpu_alloc will avoid the online and offline callbacks
(the main focus of these is getting rid of large pointer arrays there and
simplifying bootstrap etc).

[patch 4/4] cpu alloc: Use cpu allocator instead of the builtin modules per cpu allocator

[Christoph Lameter]

[-- Attachment #1: cpu_alloc_replace_modules_per_cpu_allocator --]
[-- Type: text/plain, Size: 6672 bytes --]

Remove the builtin per cpu allocator from modules.c and use cpu_alloc instead.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>

---
 include/linux/module.h |    1 
 kernel/module.c        |  178 ++++---------------------------------------------
 2 files changed, 17 insertions(+), 162 deletions(-)

Index: linux-2.6/kernel/module.c
===================================================================
--- linux-2.6.orig/kernel/module.c	2008-09-19 08:12:10.000000000 -0500
+++ linux-2.6/kernel/module.c	2008-09-19 08:16:04.000000000 -0500
@@ -337,121 +337,6 @@
 	return NULL;
 }
 
-#ifdef CONFIG_SMP
-/* Number of blocks used and allocated. */
-static unsigned int pcpu_num_used, pcpu_num_allocated;
-/* Size of each block.  -ve means used. */
-static int *pcpu_size;
-
-static int split_block(unsigned int i, unsigned short size)
-{
-	/* Reallocation required? */
-	if (pcpu_num_used + 1 > pcpu_num_allocated) {
-		int *new;
-
-		new = krealloc(pcpu_size, sizeof(new[0])*pcpu_num_allocated*2,
-			       GFP_KERNEL);
-		if (!new)
-			return 0;
-
-		pcpu_num_allocated *= 2;
-		pcpu_size = new;
-	}
-
-	/* Insert a new subblock */
-	memmove(&pcpu_size[i+1], &pcpu_size[i],
-		sizeof(pcpu_size[0]) * (pcpu_num_used - i));
-	pcpu_num_used++;
-
-	pcpu_size[i+1] -= size;
-	pcpu_size[i] = size;
-	return 1;
-}
-
-static inline unsigned int block_size(int val)
-{
-	if (val < 0)
-		return -val;
-	return val;
-}
-
-static void *percpu_modalloc(unsigned long size, unsigned long align,
-			     const char *name)
-{
-	unsigned long extra;
-	unsigned int i;
-	void *ptr;
-
-	if (align > PAGE_SIZE) {
-		printk(KERN_WARNING "%s: per-cpu alignment %li > %li\n",
-		       name, align, PAGE_SIZE);
-		align = PAGE_SIZE;
-	}
-
-	ptr = __per_cpu_start;
-	for (i = 0; i < pcpu_num_used; ptr += block_size(pcpu_size[i]), i++) {
-		/* Extra for alignment requirement. */
-		extra = ALIGN((unsigned long)ptr, align) - (unsigned long)ptr;
-		BUG_ON(i == 0 && extra != 0);
-
-		if (pcpu_size[i] < 0 || pcpu_size[i] < extra + size)
-			continue;
-
-		/* Transfer extra to previous block. */
-		if (pcpu_size[i-1] < 0)
-			pcpu_size[i-1] -= extra;
-		else
-			pcpu_size[i-1] += extra;
-		pcpu_size[i] -= extra;
-		ptr += extra;
-
-		/* Split block if warranted */
-		if (pcpu_size[i] - size > sizeof(unsigned long))
-			if (!split_block(i, size))
-				return NULL;
-
-		/* Mark allocated */
-		pcpu_size[i] = -pcpu_size[i];
-		return ptr;
-	}
-
-	printk(KERN_WARNING "Could not allocate %lu bytes percpu data\n",
-	       size);
-	return NULL;
-}
-
-static void percpu_modfree(void *freeme)
-{
-	unsigned int i;
-	void *ptr = __per_cpu_start + block_size(pcpu_size[0]);
-
-	/* First entry is core kernel percpu data. */
-	for (i = 1; i < pcpu_num_used; ptr += block_size(pcpu_size[i]), i++) {
-		if (ptr == freeme) {
-			pcpu_size[i] = -pcpu_size[i];
-			goto free;
-		}
-	}
-	BUG();
-
- free:
-	/* Merge with previous? */
-	if (pcpu_size[i-1] >= 0) {
-		pcpu_size[i-1] += pcpu_size[i];
-		pcpu_num_used--;
-		memmove(&pcpu_size[i], &pcpu_size[i+1],
-			(pcpu_num_used - i) * sizeof(pcpu_size[0]));
-		i--;
-	}
-	/* Merge with next? */
-	if (i+1 < pcpu_num_used && pcpu_size[i+1] >= 0) {
-		pcpu_size[i] += pcpu_size[i+1];
-		pcpu_num_used--;
-		memmove(&pcpu_size[i+1], &pcpu_size[i+2],
-			(pcpu_num_used - (i+1)) * sizeof(pcpu_size[0]));
-	}
-}
-
 static unsigned int find_pcpusec(Elf_Ehdr *hdr,
 				 Elf_Shdr *sechdrs,
 				 const char *secstrings)
@@ -467,48 +352,6 @@
 		memcpy(pcpudest + per_cpu_offset(cpu), from, size);
 }
 
-static int percpu_modinit(void)
-{
-	pcpu_num_used = 2;
-	pcpu_num_allocated = 2;
-	pcpu_size = kmalloc(sizeof(pcpu_size[0]) * pcpu_num_allocated,
-			    GFP_KERNEL);
-	/* Static in-kernel percpu data (used). */
-	pcpu_size[0] = -(__per_cpu_end-__per_cpu_start);
-	/* Free room. */
-	pcpu_size[1] = PERCPU_AREA_SIZE + pcpu_size[0];
-	if (pcpu_size[1] < 0) {
-		printk(KERN_ERR "No per-cpu room for modules.\n");
-		pcpu_num_used = 1;
-	}
-
-	return 0;
-}
-__initcall(percpu_modinit);
-#else /* ... !CONFIG_SMP */
-static inline void *percpu_modalloc(unsigned long size, unsigned long align,
-				    const char *name)
-{
-	return NULL;
-}
-static inline void percpu_modfree(void *pcpuptr)
-{
-	BUG();
-}
-static inline unsigned int find_pcpusec(Elf_Ehdr *hdr,
-					Elf_Shdr *sechdrs,
-					const char *secstrings)
-{
-	return 0;
-}
-static inline void percpu_modcopy(void *pcpudst, const void *src,
-				  unsigned long size)
-{
-	/* pcpusec should be 0, and size of that section should be 0. */
-	BUG_ON(size != 0);
-}
-#endif /* CONFIG_SMP */
-
 #define MODINFO_ATTR(field)	\
 static void setup_modinfo_##field(struct module *mod, const char *s)  \
 {                                                                     \
@@ -1433,7 +1276,7 @@
 	module_free(mod, mod->module_init);
 	kfree(mod->args);
 	if (mod->percpu)
-		percpu_modfree(mod->percpu);
+		cpu_free(mod->percpu, mod->percpu_size);
 
 	/* Free lock-classes: */
 	lockdep_free_key_range(mod->module_core, mod->core_size);
@@ -1833,6 +1676,7 @@
 	unsigned int markersstringsindex;
 	struct module *mod;
 	long err = 0;
+	unsigned long percpu_size = 0;
 	void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
 	struct exception_table_entry *extable;
 	mm_segment_t old_fs;
@@ -1981,15 +1825,20 @@
 
 	if (pcpuindex) {
 		/* We have a special allocation for this section. */
-		percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
-					 sechdrs[pcpuindex].sh_addralign,
-					 mod->name);
+		unsigned long align = sechdrs[pcpuindex].sh_addralign;
+
+		percpu_size = sechdrs[pcpuindex].sh_size;
+		percpu = cpu_alloc(percpu_size, GFP_KERNEL|__GFP_ZERO, align);
+		if (!percpu)
+			printk(KERN_WARNING "Could not allocate %lu bytes percpu data\n",
+	      							percpu_size);
 		if (!percpu) {
 			err = -ENOMEM;
 			goto free_mod;
 		}
 		sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
 		mod->percpu = percpu;
+		mod->percpu_size = percpu_size;
 	}
 
 	/* Determine total sizes, and put offsets in sh_entsize.  For now
@@ -2243,7 +2092,7 @@
 	module_free(mod, mod->module_core);
  free_percpu:
 	if (percpu)
-		percpu_modfree(percpu);
+		cpu_free(percpu, percpu_size);
  free_mod:
 	kfree(args);
  free_hdr:
Index: linux-2.6/include/linux/module.h
===================================================================
--- linux-2.6.orig/include/linux/module.h	2008-09-19 08:12:07.000000000 -0500
+++ linux-2.6/include/linux/module.h	2008-09-19 08:12:10.000000000 -0500
@@ -323,6 +323,7 @@
 
 	/* Per-cpu data. */
 	void *percpu;
+	int percpu_size;
 
 	/* The command line arguments (may be mangled).  People like
 	   keeping pointers to this stuff */

-- 

Re: [patch 4/4] cpu alloc: Use cpu allocator instead of the builtin modules per cpu allocator

[Rusty Russell]

On Tuesday 30 September 2008 05:35:04 Christoph Lameter wrote:
> Remove the builtin per cpu allocator from modules.c and use cpu_alloc
> instead.
>
> Signed-off-by: Christoph Lameter <cl@linux-foundation.org>

Acked-by: Rusty Russell <rusty@rustcorp.com.au>

Thanks,
Rusty.

Re: [patch 0/4] Cpu alloc V6: Replace percpu allocator in modules.c

[Rusty Russell]

On Tuesday 30 September 2008 05:35:00 Christoph Lameter wrote:
> Just do the bare mininum to establish a per cpu allocator. Later patchsets
> will gradually build out the functionality.

Hi Christoph,

   I'm not particularly attached to the allocator in module.c, and yours is 
more general.  And it's probably more efficient since most allocs are small.

> The most critical issue that came up awhile back was how to configure
> the size of the percpu area. Here we simply use a kernel parameter and use
> the static size of the existing percpu allocator for modules as a default.

Yerch.  OK, it *is* better than nothing.

Thanks for digging into this again,
Rusty.

Re: [patch 0/4] Cpu alloc V6: Replace percpu allocator in modules.c

[Andrew Morton]

On Mon, 29 Sep 2008 12:35:00 -0700
Christoph Lameter <cl@linux-foundation.org> wrote:

> Just do the bare mininum to establish a per cpu allocator. Later patchsets
> will gradually build out the functionality.

I need to drop these - the dynalloc thing (I don't think I even know
what it does) in Ingo's trees make changes all over the place and
nothing much applies any more.

Re: [patch 0/4] Cpu alloc V6: Replace percpu allocator in modules.c

[Christoph Lameter]

Andrew Morton wrote:
> On Mon, 29 Sep 2008 12:35:00 -0700
> Christoph Lameter <cl@linux-foundation.org> wrote:
> 
>> Just do the bare mininum to establish a per cpu allocator. Later patchsets
>> will gradually build out the functionality.
> 
> I need to drop these - the dynalloc thing (I don't think I even know
> what it does) in Ingo's trees make changes all over the place and
> nothing much applies any more.

Got a tree to rediff agains?

[patch 0/4] Cpu alloc V5: Replace percpu allocator in modules.c

[Christoph Lameter]

Just do the bare mininum to establish a per cpu allocator. Later patchsets
will gradually build out the functionality.

The most critical issue that came up on the last round is how to configure
the size of the percpu area. Here we simply use a kernel parameter and use
the static size of the existing percpu allocator for modules as a default.

The effect of this patchset is to make the size of percpu data for modules
configurable. Its no longer fixed at 8000 bytes.

Changes:
V4->V5:
- Fix various things pointed out by Pekka.
- Remove page alignment check from module.c and put it into cpu_alloc.c

V3->V4:
- Gut patches to the bare essentials: Only replace modules.c percpu alloocator
- Make percpu reserve area configurable via a kernel parameter


-- 

[patch 1/4] Make the per cpu reserve configurable

[Christoph Lameter]

[-- Attachment #1: cpu_alloc_configurable_percpu --]
[-- Type: text/plain, Size: 3109 bytes --]

The per cpu reserve from which loadable modules allocate their percpu sections
is currently fixed at 8000 bytes.

Add a new kernel parameter

	percpu=<dynamically allocatable percpu bytes>

The per cpu reserve area will be used in following patches by the
per cpu allocator.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>

---
 arch/ia64/include/asm/percpu.h |    1 +
 include/linux/percpu.h         |    7 ++++++-
 init/main.c                    |   13 +++++++++++++
 3 files changed, 20 insertions(+), 1 deletion(-)

Index: linux-2.6/include/linux/percpu.h
===================================================================
--- linux-2.6.orig/include/linux/percpu.h	2008-09-16 18:14:58.000000000 -0700
+++ linux-2.6/include/linux/percpu.h	2008-09-16 18:21:01.000000000 -0700
@@ -34,6 +34,7 @@
 #define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
 #define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
 
+extern unsigned int percpu_reserve;
 /* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
 #ifndef PERCPU_ENOUGH_ROOM
 #ifdef CONFIG_MODULES
@@ -43,7 +44,7 @@
 #endif
 
 #define PERCPU_ENOUGH_ROOM						\
-	(__per_cpu_end - __per_cpu_start + PERCPU_MODULE_RESERVE)
+	(__per_cpu_end - __per_cpu_start + percpu_reserve)
 #endif	/* PERCPU_ENOUGH_ROOM */
 
 /*
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c	2008-09-16 18:14:59.000000000 -0700
+++ linux-2.6/init/main.c	2008-09-16 18:24:12.000000000 -0700
@@ -253,6 +253,16 @@ static int __init loglevel(char *str)
 
 early_param("loglevel", loglevel);
 
+unsigned int percpu_reserve = PERCPU_MODULE_RESERVE;
+
+static int __init init_percpu_reserve(char *str)
+{
+	get_option(&str, &percpu_reserve);
+	return 0;
+}
+
+early_param("percpu=", init_percpu_reserve);
+
 /*
  * Unknown boot options get handed to init, unless they look like
  * failed parameters
@@ -397,6 +407,9 @@ static void __init setup_per_cpu_areas(v
 
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
+	printk(KERN_INFO "percpu area: %d bytes total, %d available.\n",
+			size, size - (__per_cpu_end - __per_cpu_start));
+
 	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
 
 	for_each_possible_cpu(i) {
Index: linux-2.6/Documentation/kernel-parameters.txt
===================================================================
--- linux-2.6.orig/Documentation/kernel-parameters.txt	2008-09-16 18:14:59.000000000 -0700
+++ linux-2.6/Documentation/kernel-parameters.txt	2008-09-16 18:20:08.000000000 -0700
@@ -1643,6 +1643,13 @@ and is between 256 and 4096 characters. 
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu=		Configure the number of percpu bytes that can be
+			dynamically allocated. This is used for per cpu
+			variables of modules and other dynamic per cpu data
+			structures. Creation of per cpu structures after boot
+			may fail if this is set too low.
+			Default is 8000 bytes.
+
 	pf.		[PARIDE]
 			See Documentation/paride.txt.
 

-- 

Re: [patch 1/4] Make the per cpu reserve configurable

[KAMEZAWA Hiroyuki]

On Fri, 19 Sep 2008 07:59:00 -0700
Christoph Lameter <cl@linux-foundation.org> wrote:
> +unsigned int percpu_reserve = PERCPU_MODULE_RESERVE;
> +

Is this PERCPU_MODULE_RESERVE default size is fixex to 8192 bytes
both on 32bit-arch and 64bit-arch ?
How about enlarging this to twice on 64bit arch now ?

sorry for noise.

Thanks,
-Kame



> +static int __init init_percpu_reserve(char *str)
> +{
> +	get_option(&str, &percpu_reserve);
> +	return 0;
> +}
> +
> +early_param("percpu=", init_percpu_reserve);
> +
>  /*
>   * Unknown boot options get handed to init, unless they look like
>   * failed parameters
> @@ -397,6 +407,9 @@ static void __init setup_per_cpu_areas(v
>  
>  	/* Copy section for each CPU (we discard the original) */
>  	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
> +	printk(KERN_INFO "percpu area: %d bytes total, %d available.\n",
> +			size, size - (__per_cpu_end - __per_cpu_start));
> +
>  	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
>  
>  	for_each_possible_cpu(i) {
> Index: linux-2.6/Documentation/kernel-parameters.txt
> ===================================================================
> --- linux-2.6.orig/Documentation/kernel-parameters.txt	2008-09-16 18:14:59.000000000 -0700
> +++ linux-2.6/Documentation/kernel-parameters.txt	2008-09-16 18:20:08.000000000 -0700
> @@ -1643,6 +1643,13 @@ and is between 256 and 4096 characters. 
>  			Format: { 0 | 1 }
>  			See arch/parisc/kernel/pdc_chassis.c
>  
> +	percpu=		Configure the number of percpu bytes that can be
> +			dynamically allocated. This is used for per cpu
> +			variables of modules and other dynamic per cpu data
> +			structures. Creation of per cpu structures after boot
> +			may fail if this is set too low.
> +			Default is 8000 bytes.
> +
>  	pf.		[PARIDE]
>  			See Documentation/paride.txt.
>  
> 
> -- 
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
> 

Re: [patch 1/4] Make the per cpu reserve configurable

[Christoph Lameter]

KAMEZAWA Hiroyuki wrote:
> Is this PERCPU_MODULE_RESERVE default size is fixex to 8192 bytes
> both on 32bit-arch and 64bit-arch ?
>   
Yes.
> How about enlarging this to twice on 64bit arch now ?
>
> sorry for noise.
No actually a good idea to discuss the limit here. Maybe use 10000 for 32 bit and 15000 for 64 bit? Many percpu variables are counters that may be integers.

[patch 0/4] Cpu alloc V4: Replace percpu allocator in modules.c

[Christoph Lameter]

Just do the bare mininum to establish a per cpu allocator. Later patchsets
will gradually build out the functionality.

The most critical issue that came up on the last round is how to configure
the size of the percpu area. Here we simply use a kernel parameter and use
the static size of the existing percpu allocator for modules as a default.

The effect of this patchset is to make the size of percpu data for modules
configurable. Its no longer fixed at 8000 bytes.

Changes:
- Gut patches to the bare essentials: Only replace modules.c percpu alloocator
- Make percpu reserve area configurable via a kernel parameter

-- 

[patch 1/4] Make the per cpu reserve configurable

[Christoph Lameter]

[-- Attachment #1: cpu_alloc_configurable_percpu --]
[-- Type: text/plain, Size: 3108 bytes --]

The per cpu reserve from which loadable modules allocate their percpu sections
is currently fixed at 8000 bytes.

Add a new kernel parameter

	percpu=<dynamically allocatable percpu bytes>

The per cpu reserve area will be used in following patches by the
per cpu allocator.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>

---
 arch/ia64/include/asm/percpu.h |    1 +
 include/linux/percpu.h         |    7 ++++++-
 init/main.c                    |   13 +++++++++++++
 3 files changed, 20 insertions(+), 1 deletion(-)

Index: linux-2.6/include/linux/percpu.h
===================================================================
--- linux-2.6.orig/include/linux/percpu.h	2008-09-16 18:14:58.000000000 -0700
+++ linux-2.6/include/linux/percpu.h	2008-09-16 18:21:01.000000000 -0700
@@ -34,6 +34,7 @@
 #define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
 #define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
 
+extern unsigned int percpu_reserve;
 /* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
 #ifndef PERCPU_ENOUGH_ROOM
 #ifdef CONFIG_MODULES
@@ -43,7 +44,7 @@
 #endif
 
 #define PERCPU_ENOUGH_ROOM						\
-	(__per_cpu_end - __per_cpu_start + PERCPU_MODULE_RESERVE)
+	(__per_cpu_end - __per_cpu_start + percpu_reserve)
 #endif	/* PERCPU_ENOUGH_ROOM */
 
 /*
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c	2008-09-16 18:14:59.000000000 -0700
+++ linux-2.6/init/main.c	2008-09-16 18:24:12.000000000 -0700
@@ -253,6 +253,16 @@ static int __init loglevel(char *str)
 
 early_param("loglevel", loglevel);
 
+unsigned int percpu_reserve = PERCPU_MODULE_RESERVE;
+
+static int __init init_percpu_reserve(char *str)
+{
+	get_option(&str, &percpu_reserve);
+	return 0;
+}
+
+early_param("percpu", init_percpu_reserve);
+
 /*
  * Unknown boot options get handed to init, unless they look like
  * failed parameters
@@ -397,6 +407,9 @@ static void __init setup_per_cpu_areas(v
 
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
+	printk(KERN_INFO "percpu area: %d bytes total, %d available.\n",
+			size, size - (__per_cpu_end - __per_cpu_start));
+
 	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
 
 	for_each_possible_cpu(i) {
Index: linux-2.6/Documentation/kernel-parameters.txt
===================================================================
--- linux-2.6.orig/Documentation/kernel-parameters.txt	2008-09-16 18:14:59.000000000 -0700
+++ linux-2.6/Documentation/kernel-parameters.txt	2008-09-16 18:20:08.000000000 -0700
@@ -1643,6 +1643,13 @@ and is between 256 and 4096 characters. 
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu=		Configure the number of percpu bytes that can be
+			dynamically allocated. This is used for per cpu
+			variables of modules and other dynamic per cpu data
+			structures. Creation of per cpu structures after boot
+			may fail if this is set too low.
+			Default is 8000 bytes.
+
 	pf.		[PARIDE]
 			See Documentation/paride.txt.
 

-- 

Re: [patch 1/4] Make the per cpu reserve configurable

[Pekka Enberg]

Hi Christoph,

On Fri, Sep 19, 2008 at 2:36 AM, Christoph Lameter
<cl@linux-foundation.org> wrote:
> The per cpu reserve from which loadable modules allocate their percpu sections
> is currently fixed at 8000 bytes.
>
> Add a new kernel parameter
>
>        percpu=<dynamically allocatable percpu bytes>
>
> The per cpu reserve area will be used in following patches by the
> per cpu allocator.
>
> Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
>
> ---
>  arch/ia64/include/asm/percpu.h |    1 +
>  include/linux/percpu.h         |    7 ++++++-
>  init/main.c                    |   13 +++++++++++++
>  3 files changed, 20 insertions(+), 1 deletion(-)

Wrong diffstat? There's no ia64 changes in the patch.

Re: [patch 1/4] Make the per cpu reserve configurable

[Christoph Lameter]

Pekka Enberg wrote:
> 
> Wrong diffstat? There's no ia64 changes in the patch.

Hmmm... I thought quilt would update that...