* [BUG] >2.6.27 dies at cardbus init on laptop
@ 2009-02-17 19:28 David Pflug
2009-02-19 9:22 ` Andrew Morton
0 siblings, 1 reply; 2+ messages in thread
From: David Pflug @ 2009-02-17 19:28 UTC (permalink / raw)
To: Linux Kernel Mailing List
While trying to boot kernels greater than 2.6.27 on this Toshiba
Satellite 1135-S155, it freezes while initializing Texas Instruments
PCI1410 PC card Cardbus Controller [104c:ac50]. However, it boots with
pci=noacpi. The IRQ of the cardbus is shared by one of the USB
controllers and the IDE controller.
Identical symptoms on 2.6.29rc5.
Last few messages with default kernel line:
pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x0000004bffffff
pci 0000:02:02.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
dmesg with acpi=off:
http://dpaste.com/hold/121766/
Kernel config:
http://dpaste.com/hold/121721/
lspci output:
http://dpaste.com/hold/121768/
Is there anything else I can do to help debug?
--
David Pflug
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [BUG] >2.6.27 dies at cardbus init on laptop
2009-02-17 19:28 [BUG] >2.6.27 dies at cardbus init on laptop David Pflug
@ 2009-02-19 9:22 ` Andrew Morton
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Morton @ 2009-02-19 9:22 UTC (permalink / raw)
To: David Pflug; +Cc: Linux Kernel Mailing List, linux-acpi
(cc linux-acpi)
On Tue, 17 Feb 2009 14:28:23 -0500 David Pflug <dtpflug@gmail.com> wrote:
> While trying to boot kernels greater than 2.6.27 on this Toshiba
> Satellite 1135-S155, it freezes while initializing Texas Instruments
> PCI1410 PC card Cardbus Controller [104c:ac50]. However, it boots with
> pci=noacpi. The IRQ of the cardbus is shared by one of the USB
> controllers and the IDE controller.
>
> Identical symptoms on 2.6.29rc5.
>
> Last few messages with default kernel line:
> pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x0000004bffffff
> pci 0000:02:02.0: enabling device (0000 -> 0003)
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
>
> dmesg with acpi=off:
> http://dpaste.com/hold/121766/
>
> Kernel config:
> http://dpaste.com/hold/121721/
>
> lspci output:
> http://dpaste.com/hold/121768/
presumably an acpi-related thing.
> Is there anything else I can do to help debug?
Best to raise a report against acpi at bugzilla.kernel.org, please.
Often it's better to report kernel bugs via email, but acpi is
exceptional in that regard. It's all a bit confusing.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-02-19 9:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-02-17 19:28 [BUG] >2.6.27 dies at cardbus init on laptop David Pflug
2009-02-19 9:22 ` Andrew Morton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).