* Regression: kernels since 2.6.26 are unusably slow
@ 2009-09-25 22:09 Aneurin Price
2009-09-25 22:51 ` Frans Pop
2009-09-26 7:20 ` Arjan van de Ven
0 siblings, 2 replies; 7+ messages in thread
From: Aneurin Price @ 2009-09-25 22:09 UTC (permalink / raw)
To: linux-kernel
Hi,
Every kernel since 2.6.26 has been unusably slow for me - to the extent that I
initially thought they were hanging on boot. Exactly how bad it is seems to
vary, but it could take several minutes to boot, and then another minute or two
to log in (with bash pegging the CPU as it loads). Everything seems to need
vastly more CPU time than usual - it feels a little like I'm using a 486.
I've bisected the problem down to commit
42651f15824d003e8357693ab72c4dbb3e280836 (x86: fix trimming e820 with MTRR
holes). Having basically no idea what that means, I thought I'd try building a
kernel with MTRRs disabled, to see if that would make any difference, but no
joy.
Can anyone give me some idea of where to go next, or let me know what further
information I should provide?
Thanks,
Nye
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Regression: kernels since 2.6.26 are unusably slow
2009-09-25 22:09 Regression: kernels since 2.6.26 are unusably slow Aneurin Price
@ 2009-09-25 22:51 ` Frans Pop
2009-09-26 1:02 ` Aneurin Price
2009-09-26 7:20 ` Arjan van de Ven
1 sibling, 1 reply; 7+ messages in thread
From: Frans Pop @ 2009-09-25 22:51 UTC (permalink / raw)
To: Aneurin Price; +Cc: linux-kernel, Yinghai Lu, Ingo Molnar, Thomas Gleixner
Adding maintainers involved with the commit in CC.
Aneurin Price wrote:
> Hi,
> Every kernel since 2.6.26 has been unusably slow for me - to the extent
> that I initially thought they were hanging on boot. Exactly how bad it is
> seems to vary, but it could take several minutes to boot, and then
> another minute or two to log in (with bash pegging the CPU as it loads).
> Everything seems to need vastly more CPU time than usual - it feels a
> little like I'm using a 486.
>
> I've bisected the problem down to commit
> 42651f15824d003e8357693ab72c4dbb3e280836 (x86: fix trimming e820 with
> MTRR holes). Having basically no idea what that means, I thought I'd try
> building a kernel with MTRRs disabled, to see if that would make any
> difference, but no joy.
>
> Can anyone give me some idea of where to go next, or let me know what
> further information I should provide?
Let's start with some basic info. Can you please send your kernel config
and the output of 'dmesg' after a boot with a "slow" kernel?
Also, what distribution do you use (and what is its release/version)?
Cheers,
FJP
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Regression: kernels since 2.6.26 are unusably slow
2009-09-25 22:51 ` Frans Pop
@ 2009-09-26 1:02 ` Aneurin Price
2009-09-26 1:47 ` Yinghai Lu
0 siblings, 1 reply; 7+ messages in thread
From: Aneurin Price @ 2009-09-26 1:02 UTC (permalink / raw)
To: Frans Pop; +Cc: linux-kernel, Yinghai Lu, Ingo Molnar, Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 1915 bytes --]
On Fri, Sep 25, 2009 at 23:51, Frans Pop <elendil@planet.nl> wrote:
> Adding maintainers involved with the commit in CC.
>
> Aneurin Price wrote:
>> Hi,
>> Every kernel since 2.6.26 has been unusably slow for me - to the extent
>> that I initially thought they were hanging on boot. Exactly how bad it is
>> seems to vary, but it could take several minutes to boot, and then
>> another minute or two to log in (with bash pegging the CPU as it loads).
>> Everything seems to need vastly more CPU time than usual - it feels a
>> little like I'm using a 486.
>>
>> I've bisected the problem down to commit
>> 42651f15824d003e8357693ab72c4dbb3e280836 (x86: fix trimming e820 with
>> MTRR holes). Having basically no idea what that means, I thought I'd try
>> building a kernel with MTRRs disabled, to see if that would make any
>> difference, but no joy.
>>
>> Can anyone give me some idea of where to go next, or let me know what
>> further information I should provide?
>
> Let's start with some basic info. Can you please send your kernel config
> and the output of 'dmesg' after a boot with a "slow" kernel?
>
Attached. I'm not entirely convinced about the sanity of that kernel config, so
if it might help I could repeat with a Debian packaged kernel, on the basis that
it's presumably working without error for a large number of people.
> Also, what distribution do you use (and what is its release/version)?
>
I'm using Debian unstable.
Hmm. Looking at dmesg for a 'working' kernel includes an interesting part which
I foolishly forgot to save, saying that the last 512MB of memory is
inaccessible (I was wondering where that last half-gig had gone :-)). I can go
and check exactly what it says, but I don't have the energy left for any more
reboots today. Anyway, that prompted me to try booting with mem=7168 - and that
makes the problem go away. Perhaps that will shed some light on things.
Thanks,
Nye
[-- Attachment #2: dmesg.2.6.31-09061-g6d7f18f-dirty --]
[-- Type: application/octet-stream, Size: 44382 bytes --]
[ 0.000000] Linux version 2.6.31-09061-g6d7f18f-dirty (root@hastur) (gcc version 4.3.4 (Debian 4.3.4-2) ) #28 SMP PREEMPT Sat Sep 26 00:10:46 BST 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-09061-g6d7f18f-dirty root=/dev/sda2 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 100000000 mask FE0000000 write-back
[ 0.000000] 1 base 100000000 mask F00000000 write-back
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0DFF00000 mask FFFF00000 write-through
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ c000-16000
[ 0.000000] ACPI: RSDP 00000000000f6f10 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee3180 04A88 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee7d80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee7e00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000dfee7c80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0220000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00015e4a4c] TEXT DATA BSS ==> [0001000000 - 00015e4a4c]
[ 0.000000] #3 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #4 [00015e5000 - 00015e50f6] BRK ==> [00015e5000 - 00015e50f6]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000f5570] f5570
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2096766
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 109 pages reserved
[ 0.000000] DMA zone: 3833 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880028200000 s77784 r8192 d20520 u524288
[ 0.000000] pcpu-alloc: s77784 r8192 d20520 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066193
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-09061-g6d7f18f-dirty root=/dev/sda2 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8184360k/8912896k available (3249k kernel code, 525832k absent, 201760k reserved, 1709k data, 416k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:384
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 2399.992 MHz processor.
[ 0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.98 BogoMIPS (lpj=2399992)
[ 0.003169] Security Framework initialized
[ 0.003229] SELinux: Disabled at boot.
[ 0.003485] Mount-cache hash table entries: 256
[ 0.005981] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.006046] CPU: L2 cache: 4096K
[ 0.006100] CPU: Physical Processor ID: 0
[ 0.006158] CPU: Processor Core ID: 0
[ 0.006215] mce: CPU supports 6 MCE banks
[ 0.006294] CPU0: Thermal monitoring enabled (TM2)
[ 0.006358] using mwait in idle threads.
[ 0.006415] Performance Events: Core2 events, Intel PMU driver.
[ 0.006539] ... version: 2
[ 0.006597] ... bit width: 40
[ 0.006655] ... generic registers: 2
[ 0.006713] ... value mask: 000000ffffffffff
[ 0.006778] ... max period: 000000007fffffff
[ 0.006843] ... fixed-purpose events: 3
[ 0.006900] ... event mask: 0000000700000003
[ 0.007030] ACPI: Core revision 20090903
[ 0.058405] Setting APIC routing to flat
[ 0.059852] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070247] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.077458] Booting processor 1 APIC 0x3 ip 0x6000
[ 0.002999] Initializing CPU#1
[ 0.002999] Calibrating delay using timer specific routine.. 4800.12 BogoMIPS (lpj=2400062)
[ 0.002999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002999] CPU: L2 cache: 4096K
[ 0.002999] CPU: Physical Processor ID: 0
[ 0.002999] CPU: Processor Core ID: 3
[ 0.002999] mce: CPU supports 6 MCE banks
[ 0.002999] CPU1: Thermal monitoring enabled (TM2)
[ 0.148536] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.149345] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.155389] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.002999] Initializing CPU#2
[ 0.002999] Calibrating delay using timer specific routine.. 4800.17 BogoMIPS (lpj=2400085)
[ 0.002999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002999] CPU: L2 cache: 4096K
[ 0.002999] CPU: Physical Processor ID: 0
[ 0.002999] CPU: Processor Core ID: 2
[ 0.002999] mce: CPU supports 6 MCE banks
[ 0.002999] CPU2: Thermal monitoring enabled (TM2)
[ 0.226444] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.227333] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.233435] Booting processor 3 APIC 0x1 ip 0x6000
[ 0.002999] Initializing CPU#3
[ 0.002999] Calibrating delay using timer specific routine.. 4800.05 BogoMIPS (lpj=2400025)
[ 0.002999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002999] CPU: L2 cache: 4096K
[ 0.002999] CPU: Physical Processor ID: 0
[ 0.002999] CPU: Processor Core ID: 1
[ 0.002999] mce: CPU supports 6 MCE banks
[ 0.002999] CPU3: Thermal monitoring enabled (TM2)
[ 0.304389] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.305348] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.306203] Brought up 4 CPUs
[ 0.306430] Total of 4 processors activated (19200.32 BogoMIPS).
[ 0.306953] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.307953] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.307953] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.308096] CPU0 attaching sched-domain:
[ 0.308163] domain 0: span 0,3 level MC
[ 0.308232] groups: 0 3
[ 0.308367] domain 1: span 0-3 level CPU
[ 0.308437] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048)
[ 0.309119] CPU1 attaching sched-domain:
[ 0.309182] domain 0: span 1-2 level MC
[ 0.309266] groups: 1 2
[ 0.309416] domain 1: span 0-3 level CPU
[ 0.309486] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048)
[ 0.309687] CPU2 attaching sched-domain:
[ 0.309750] domain 0: span 1-2 level MC
[ 0.309820] groups: 2 1
[ 0.309952] domain 1: span 0-3 level CPU
[ 0.310001] groups: 1-2 (cpu_power = 2048) 0,3 (cpu_power = 2048)
[ 0.310211] CPU3 attaching sched-domain:
[ 0.310289] domain 0: span 0,3 level MC
[ 0.310367] groups: 3 0
[ 0.310502] domain 1: span 0-3 level CPU
[ 0.310571] groups: 0,3 (cpu_power = 2048) 1-2 (cpu_power = 2048)
[ 0.333035] NET: Registered protocol family 16
[ 0.345131] ACPI: bus type pci registered
[ 0.348863] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.349037] PCI: MCFG area at f0000000 reserved in E820
[ 0.436260] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.436582] PCI: Using configuration type 1 for base access
[ 0.443154] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.443494] mtrr: probably your BIOS does not setup all CPUs.
[ 0.443812] mtrr: corrected configuration.
[ 0.584817] bio: create slab <bio-0> at 0
[ 0.624342] ACPI: EC: Look up EC in DSDT
[ 0.870857] ACPI: Interpreter enabled
[ 0.871024] ACPI: (supports S0 S3 S4 S5)
[ 0.872480] ACPI: Using IOAPIC for interrupt routing
[ 1.171172] ACPI: No dock devices found.
[ 1.174751] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.178405] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.178763] pci 0000:00:01.0: PME# disabled
[ 1.179871] pci 0000:00:1a.0: reg 20 io port: [0xe200-0xe21f]
[ 1.180681] pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f]
[ 1.181455] pci 0000:00:1a.2: reg 20 io port: [0xe100-0xe11f]
[ 1.182170] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9004000-0xf90043ff]
[ 1.183074] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9000000-0xf9003fff]
[ 1.183497] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.183855] pci 0000:00:1b.0: PME# disabled
[ 1.184695] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.185045] pci 0000:00:1c.0: PME# disabled
[ 1.186136] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.186511] pci 0000:00:1c.3: PME# disabled
[ 1.187472] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.187844] pci 0000:00:1c.4: PME# disabled
[ 1.188592] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f]
[ 1.189458] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
[ 1.190235] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f]
[ 1.190969] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9005000-0xf90053ff]
[ 1.192640] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 1.193052] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 1.193445] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 1.193912] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 1.194649] pci 0000:00:1f.2: reg 10 io port: [0xe600-0xe607]
[ 1.195080] pci 0000:00:1f.2: reg 14 io port: [0xe700-0xe703]
[ 1.195187] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
[ 1.195294] pci 0000:00:1f.2: reg 1c io port: [0xe900-0xe903]
[ 1.195401] pci 0000:00:1f.2: reg 20 io port: [0xea00-0xea1f]
[ 1.195510] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9006000-0xf90067ff]
[ 1.195864] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.196045] pci 0000:00:1f.2: PME# disabled
[ 1.196708] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9007000-0xf90070ff]
[ 1.197114] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 1.197816] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff]
[ 1.197953] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 1.198108] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf5000000-0xf5ffffff]
[ 1.198216] pci 0000:01:00.0: reg 24 io port: [0xc000-0xc07f]
[ 1.198323] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 1.199118] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 1.199203] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf6ffffff]
[ 1.199307] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 1.199969] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
[ 1.200646] pci 0000:00:1c.3: bridge io port: [0xa000-0xafff]
[ 1.201310] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 1.201483] pci 0000:04:00.0: reg 18 64bit mmio: [0xf8000000-0xf8000fff]
[ 1.201660] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 1.201985] pci 0000:04:00.0: supports D1 D2
[ 1.202042] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 1.202413] pci 0000:04:00.0: PME# disabled
[ 1.203266] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 1.203352] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7000000-0xf8ffffff]
[ 1.204070] pci 0000:00:1e.0: transparent bridge
[ 1.204384] pci 0000:00:1e.0: bridge io port: [0x9000-0x9fff]
[ 1.204650] pci_bus 0000:00: on NUMA node 0
[ 1.204764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.212910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 1.215850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.219151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 1.221882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 2.148252] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 2.153528] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 2.159001] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 2.164294] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 2.169562] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 2.175001] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 2.180319] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 2.185610] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 2.195706] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.196072] vgaarb: loaded
[ 2.206267] SCSI subsystem initialized
[ 2.211103] libata version 3.00 loaded.
[ 2.216070] usbcore: registered new interface driver usbfs
[ 2.220070] usbcore: registered new interface driver hub
[ 2.223071] usbcore: registered new device driver usb
[ 2.238070] PCI: Using ACPI for IRQ routing
[ 2.246219] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 2.246860] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 2.253169] Switching to clocksource tsc
[ 2.261452] Switched to high resolution mode on CPU 0
[ 2.261860] Switched to high resolution mode on CPU 3
[ 2.262041] Switched to high resolution mode on CPU 2
[ 2.262145] Switched to high resolution mode on CPU 1
[ 2.311285] pnp: PnP ACPI init
[ 2.311690] ACPI: bus type pnp registered
[ 2.435605] pnp: PnP ACPI: found 12 devices
[ 2.435865] ACPI: ACPI bus type pnp unregistered
[ 2.436364] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 2.436761] system 00:01: ioport range 0x290-0x29f has been reserved
[ 2.437146] system 00:01: ioport range 0x800-0x87f has been reserved
[ 2.437565] system 00:01: ioport range 0x290-0x294 has been reserved
[ 2.437945] system 00:01: ioport range 0x880-0x88f has been reserved
[ 2.438518] system 00:08: ioport range 0x400-0x4bf could not be reserved
[ 2.439006] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 2.439562] system 00:0a: iomem range 0xd2000-0xd3fff has been reserved
[ 2.439954] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 2.440387] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 2.440811] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 2.441233] system 00:0a: iomem range 0xdfee0000-0xdfefffff could not be reserved
[ 2.441707] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 2.442101] system 00:0a: iomem range 0x100000-0xdfedffff could not be reserved
[ 2.442587] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 2.443030] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been reserved
[ 2.443581] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 2.443995] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 2.444456] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 2.444870] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
[ 2.445309] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[ 2.475362] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 2.475725] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 2.476060] pci 0000:00:01.0: MEM window: 0xf4000000-0xf6ffffff
[ 2.476465] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 2.476916] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 2.477282] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 2.477641] pci 0000:00:1c.0: MEM window: 0xf9100000-0xf92fffff
[ 2.478003] pci 0000:00:1c.0: PREFETCH window: 0x000000f9300000-0x000000f94fffff
[ 2.478496] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 2.478841] pci 0000:00:1c.3: IO window: 0xa000-0xafff
[ 2.479193] pci 0000:00:1c.3: MEM window: 0xf9500000-0xf96fffff
[ 2.479587] pci 0000:00:1c.3: PREFETCH window: 0x000000f9700000-0x000000f98fffff
[ 2.480059] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[ 2.480449] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 2.480784] pci 0000:00:1c.4: MEM window: 0xf7000000-0xf8ffffff
[ 2.481152] pci 0000:00:1c.4: PREFETCH window: 0xf9900000-0xf9afffff
[ 2.481571] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 2.481916] pci 0000:00:1e.0: IO window: 0x9000-0x9fff
[ 2.482255] pci 0000:00:1e.0: MEM window: disabled
[ 2.482591] pci 0000:00:1e.0: PREFETCH window: disabled
[ 2.483000] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.483426] pci 0000:00:01.0: setting latency timer to 64
[ 2.483554] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.483934] pci 0000:00:1c.0: setting latency timer to 64
[ 2.484089] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.484515] pci 0000:00:1c.3: setting latency timer to 64
[ 2.484642] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.485022] pci 0000:00:1c.4: setting latency timer to 64
[ 2.485125] pci 0000:00:1e.0: setting latency timer to 64
[ 2.485224] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 2.485319] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 2.485399] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 2.485496] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf6ffffff]
[ 2.485577] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 2.485659] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 2.485739] pci_bus 0000:02: resource 1 mem: [0xf9100000-0xf92fffff]
[ 2.485819] pci_bus 0000:02: resource 2 pref mem [0xf9300000-0xf94fffff]
[ 2.485900] pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
[ 2.485979] pci_bus 0000:03: resource 1 mem: [0xf9500000-0xf96fffff]
[ 2.486060] pci_bus 0000:03: resource 2 pref mem [0xf9700000-0xf98fffff]
[ 2.486147] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 2.486235] pci_bus 0000:04: resource 1 mem: [0xf7000000-0xf8ffffff]
[ 2.486330] pci_bus 0000:04: resource 2 pref mem [0xf9900000-0xf9afffff]
[ 2.486429] pci_bus 0000:05: resource 0 io: [0x9000-0x9fff]
[ 2.486505] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 2.486584] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 2.488796] NET: Registered protocol family 2
[ 2.492188] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.567127] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 2.583862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.588306] TCP: Hash tables configured (established 262144 bind 65536)
[ 2.588675] TCP reno registered
[ 2.591954] NET: Registered protocol family 1
[ 4.010504] audit: initializing netlink socket (disabled)
[ 4.010950] type=2000 audit(1253922088.010:1): initialized
[ 5.021171] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 5.028606] VFS: Disk quotas dquot_6.5.2
[ 5.030101] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.035128] fuse init (API version 7.13)
[ 5.540824] msgmni has been set to 15986
[ 6.510518] alg: No test for stdrng (krng)
[ 6.513474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 6.513896] io scheduler noop registered
[ 6.514151] io scheduler anticipatory registered
[ 6.514455] io scheduler deadline registered
[ 6.516053] io scheduler cfq registered (default)
[ 6.517343] pci 0000:01:00.0: Boot video device
[ 6.697441] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 6.697544] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 7.707748] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 7.707855] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 8.007233] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 8.007337] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 8.014237] pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 8.014341] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 8.039485] input: Power Button as /class/input/input0
[ 8.039814] ACPI: Power Button [PWRF]
[ 8.043495] input: Power Button as /class/input/input1
[ 8.043815] ACPI: Power Button [PWRB]
[ 8.053681] processor LNXCPU:00: registered as cooling_device0
[ 8.054091] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 8.701359] processor LNXCPU:01: registered as cooling_device1
[ 8.701751] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 9.502416] processor LNXCPU:02: registered as cooling_device2
[ 9.502808] ACPI: Processor [CPU2] (supports 2 throttling states)
[ 10.507791] processor LNXCPU:03: registered as cooling_device3
[ 10.508184] ACPI: Processor [CPU3] (supports 2 throttling states)
[ 11.328124] Non-volatile memory driver v1.3
[ 11.328407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 11.331224] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.345210] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.353972] parport_pc 00:07: reported by Plug and Play ACPI
[ 11.354434] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 11.968211] brd: module loaded
[ 12.003211] loop: module loaded
[ 12.023923] ahci 0000:00:1f.2: version 3.0
[ 12.024072] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 12.024878] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 12.028343] ahci: SSS flag set, parallel bus scan disabled
[ 12.028960] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 12.029473] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[ 12.029933] ahci 0000:00:1f.2: setting latency timer to 64
[ 12.039005] scsi0 : ahci
[ 12.043880] scsi1 : ahci
[ 12.046894] scsi2 : ahci
[ 12.049877] scsi3 : ahci
[ 12.052965] scsi4 : ahci
[ 12.055881] scsi5 : ahci
[ 12.065225] ata1: SATA max UDMA/133 abar m2048@0xf9006000 port 0xf9006100 irq 28
[ 12.065647] ata2: SATA max UDMA/133 abar m2048@0xf9006000 port 0xf9006180 irq 28
[ 12.066085] ata3: SATA max UDMA/133 abar m2048@0xf9006000 port 0xf9006200 irq 28
[ 12.066524] ata4: SATA max UDMA/133 abar m2048@0xf9006000 port 0xf9006280 irq 28
[ 12.066944] ata5: SATA max UDMA/133 abar m2048@0xf9006000 port 0xf9006300 irq 28
[ 12.067398] ata6: SATA max UDMA/133 abar m2048@0xf9006000 port 0xf9006380 irq 28
[ 12.527092] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.568467] ata1.00: HPA detected: current 976771055, native 976773168
[ 12.568891] ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 12.569250] ata1.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 12.590586] pcd: pcd version 1.07, major 46, nice 0
[ 12.592514] pcd0: Autoprobe failed
[ 12.592751] pcd: No CD-ROM drive found
[ 12.599058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 12.599761] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 12.600306] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 12.600371] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 12.603078] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 12.608164] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 12.608526] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9004000
[ 12.619088] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 12.619953] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 12.620352] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.620763] usb usb1: Product: EHCI Host Controller
[ 12.621081] usb usb1: Manufacturer: Linux 2.6.31-09061-g6d7f18f-dirty ehci_hcd
[ 12.621491] usb usb1: SerialNumber: 0000:00:1a.7
[ 12.625180] usb usb1: configuration #1 chosen from 1 choice
[ 12.627173] ata1.00: configured for UDMA/133
[ 12.628136] hub 1-0:1.0: USB hub found
[ 12.628513] hub 1-0:1.0: 6 ports detected
[ 12.631861] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 12.632412] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 12.632477] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 12.635078] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 12.640084] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 12.640403] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9005000
[ 12.643753] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 12.651141] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 12.651562] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 12.652116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 12.652545] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.652985] usb usb2: Product: EHCI Host Controller
[ 12.653311] usb usb2: Manufacturer: Linux 2.6.31-09061-g6d7f18f-dirty ehci_hcd
[ 12.653518] sd 0:0:0:0: [sda] Write Protect is off
[ 12.653592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.654039] usb usb2: SerialNumber: 0000:00:1d.7
[ 12.654371] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.659133] sda: sda1 sda2 sda3
[ 12.679891] usb usb2: configuration #1 chosen from 1 choice
[ 12.683918] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.685558] hub 2-0:1.0: USB hub found
[ 12.686001] hub 2-0:1.0: 6 ports detected
[ 12.692154] uhci_hcd: USB Universal Host Controller Interface driver
[ 12.693350] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.693897] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 12.693976] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 12.696670] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 12.697659] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e200
[ 12.699289] sd 0:0:0:0: [sda] Attached SCSI disk
[ 12.699339] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.699409] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.699481] usb usb3: Product: UHCI Host Controller
[ 12.699551] usb usb3: Manufacturer: Linux 2.6.31-09061-g6d7f18f-dirty uhci_hcd
[ 12.699622] usb usb3: SerialNumber: 0000:00:1a.0
[ 12.702954] usb usb3: configuration #1 chosen from 1 choice
[ 12.705904] hub 3-0:1.0: USB hub found
[ 12.706329] hub 3-0:1.0: 2 ports detected
[ 12.709893] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 12.710401] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 12.710467] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 12.712758] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 12.713614] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[ 12.715043] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.715441] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.715854] usb usb4: Product: UHCI Host Controller
[ 12.716191] usb usb4: Manufacturer: Linux 2.6.31-09061-g6d7f18f-dirty uhci_hcd
[ 12.716603] usb usb4: SerialNumber: 0000:00:1a.1
[ 12.719806] usb usb4: configuration #1 chosen from 1 choice
[ 12.722118] hub 4-0:1.0: USB hub found
[ 12.722546] hub 4-0:1.0: 2 ports detected
[ 12.725718] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 12.726201] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 12.726266] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 12.729162] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 12.729825] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
[ 12.731281] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.731673] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.732104] usb usb5: Product: UHCI Host Controller
[ 12.732424] usb usb5: Manufacturer: Linux 2.6.31-09061-g6d7f18f-dirty uhci_hcd
[ 12.732836] usb usb5: SerialNumber: 0000:00:1a.2
[ 12.735818] usb usb5: configuration #1 chosen from 1 choice
[ 12.738163] hub 5-0:1.0: USB hub found
[ 12.738548] hub 5-0:1.0: 2 ports detected
[ 12.741958] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 12.742444] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 12.742509] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 12.745086] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 12.745732] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 12.747154] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.747543] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.747955] usb usb6: Product: UHCI Host Controller
[ 12.748297] usb usb6: Manufacturer: Linux 2.6.31-09061-g6d7f18f-dirty uhci_hcd
[ 12.748712] usb usb6: SerialNumber: 0000:00:1d.0
[ 12.752197] usb usb6: configuration #1 chosen from 1 choice
[ 12.755186] hub 6-0:1.0: USB hub found
[ 12.755564] hub 6-0:1.0: 2 ports detected
[ 12.758908] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 12.759395] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 12.759461] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 12.762110] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 12.762951] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 12.764385] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.764769] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.765212] usb usb7: Product: UHCI Host Controller
[ 12.765518] usb usb7: Manufacturer: Linux 2.6.31-09061-g6d7f18f-dirty uhci_hcd
[ 12.765930] usb usb7: SerialNumber: 0000:00:1d.1
[ 12.769341] usb usb7: configuration #1 chosen from 1 choice
[ 12.772162] hub 7-0:1.0: USB hub found
[ 12.772707] hub 7-0:1.0: 2 ports detected
[ 12.775893] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 12.776377] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 12.776444] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 12.779083] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 12.779741] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 12.781162] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.781551] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.781964] usb usb8: Product: UHCI Host Controller
[ 12.782300] usb usb8: Manufacturer: Linux 2.6.31-09061-g6d7f18f-dirty uhci_hcd
[ 12.782712] usb usb8: SerialNumber: 0000:00:1d.2
[ 12.786443] usb usb8: configuration #1 chosen from 1 choice
[ 12.788790] hub 8-0:1.0: USB hub found
[ 12.789228] hub 8-0:1.0: 2 ports detected
[ 12.793687] Initializing USB Mass Storage driver...
[ 12.797554] usbcore: registered new interface driver usb-storage
[ 12.797920] USB Mass Storage support registered.
[ 12.800831] usbcore: registered new interface driver appledisplay
[ 12.805999] PNP: No PS/2 controller found. Probing ports directly.
[ 13.194147] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 13.235610] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 13.236038] If AUX port is really absent please use the 'i8042.noaux' option.
[ 13.357707] usb 4-2: New USB device found, idVendor=f617, idProduct=0905
[ 13.358085] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.358561] usb 4-2: Product: Endura Keyboard
[ 13.358842] usb 4-2: Manufacturer: Unicomp
[ 13.486372] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.502388] usb 4-2: configuration #1 chosen from 1 choice
[ 13.515102] mice: PS/2 mouse device common for all mice
[ 13.522152] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 13.522839] rtc_cmos 00:03: RTC can wake from S4
[ 13.525685] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 13.526268] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 13.527964] cpuidle: using governor ladder
[ 13.528323] cpuidle: using governor menu
[ 13.528635] No iBFT detected.
[ 13.565434] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 13.573351] usbcore: registered new interface driver hiddev
[ 13.603676] input: Unicomp Endura Keyboard as /class/input/input2
[ 13.609103] ata2.00: ATA-7: ST3300622AS, 3.AAH, max UDMA/133
[ 13.609482] ata2.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 13.702535] generic-usb 0003:F617:0905.0001: input,hidraw0: USB HID v1.10 Keyboard [Unicomp Endura Keyboard ] on usb-0000:00:1a.1-2/input0
[ 13.705228] usbcore: registered new interface driver usbhid
[ 13.705582] usbhid: v2.6:USB HID core driver
[ 13.717312] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.718003] TCP cubic registered
[ 13.718258] NET: Registered protocol family 17
[ 13.720228] Bridge firewalling registered
[ 13.727309] registered taskstats version 1
[ 13.733568] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 13.735384] rtc_cmos 00:03: setting system clock to 2009-09-25 23:41:38 UTC (1253922098)
[ 13.751037] ata2.00: configured for UDMA/133
[ 13.846600] scsi 1:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5
[ 13.867409] sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 13.869768] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 13.872493] sd 1:0:0:0: [sdb] Write Protect is off
[ 13.872811] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 13.873526] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.878306] sdb: sdb1
[ 13.911899] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 13.930799] usb 6-1: New USB device found, idVendor=046d, idProduct=c526
[ 13.931204] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.931608] usb 6-1: Product: USB Receiver
[ 13.931874] usb 6-1: Manufacturer: Logitech
[ 14.437845] usb 6-1: configuration #1 chosen from 1 choice
[ 14.523094] input: Logitech USB Receiver as /class/input/input3
[ 14.529116] generic-usb 0003:046D:C526.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 14.558550] input: Logitech USB Receiver as /class/input/input4
[ 14.565818] generic-usb 0003:046D:C526.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 14.751088] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 14.764794] ata3.00: ATAPI: ATAPI DVD A DH20A1S, UX14, max UDMA/100, ATAPI AN
[ 14.779956] ata3.00: configured for UDMA/100
[ 14.804663] scsi 2:0:0:0: CD-ROM ATAPI DVD A DH20A1S UX14 PQ: 0 ANSI: 5
[ 16.013798] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 16.014211] Uniform CD-ROM driver Revision: 3.20
[ 16.698509] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 17.203140] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 18.381249] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.388599] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[ 18.388960] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 18.397544] ata4.00: configured for UDMA/133
[ 18.420859] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 18.700358] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 18.702539] sd 3:0:0:0: [sdc] Write Protect is off
[ 18.702902] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 18.703607] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 18.703686] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.708669] sdc: sdc1
[ 18.729119] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 19.011090] ata5: SATA link down (SStatus 0 SControl 300)
[ 19.811149] ata6: SATA link down (SStatus 0 SControl 300)
[ 20.070359] kjournald starting. Commit interval 5 seconds
[ 20.070563] EXT3-fs: mounted filesystem with writeback data mode.
[ 20.070734] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
[ 20.071594] Freeing unused kernel memory: 416k freed
[ 51.310724] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 51.311597] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 51.312531] r8169 0000:04:00.0: setting latency timer to 64
[ 51.313033] r8169 0000:04:00.0: irq 29 for MSI/MSI-X
[ 51.340709] eth0: RTL8168b/8111b at 0xffffc9000005e000, 00:1a:4d:4c:f2:33, XID 18000000 IRQ 29
[ 52.427604] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 61.236131] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 61.237669] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 93.641096] Adding 2000052k swap on /dev/sda1. Priority:-1 extents:1 across:2000052k
[ 95.704367] EXT3 FS on sda2, internal journal
[ 97.782715] it87: Found IT8718F chip at 0x290, revision 4
[ 97.783072] it87: in3 is VCC (+5V)
[ 98.081815] coretemp coretemp.0: Using relative temperature scale!
[ 98.084325] coretemp coretemp.1: Using relative temperature scale!
[ 98.086924] coretemp coretemp.2: Using relative temperature scale!
[ 98.089451] coretemp coretemp.3: Using relative temperature scale!
[ 104.003486] kjournald starting. Commit interval 5 seconds
[ 104.003546] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 104.021650] EXT3 FS on sdc1, internal journal
[ 104.022053] EXT3-fs: mounted filesystem with writeback data mode.
[ 104.488650] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 104.492738] kjournald starting. Commit interval 5 seconds
[ 104.493225] EXT3 FS on sda3, internal journal
[ 104.493635] EXT3-fs: mounted filesystem with writeback data mode.
[ 120.820877] device eth0 entered promiscuous mode
[ 120.893372] r8169: eth0: link up
[ 120.893647] r8169: eth0: link up
[ 121.639126] br0: port 1(eth0) entering learning state
[ 130.639270] br0: port 1(eth0) entering forwarding state
[ 207.493786] NET: Registered protocol family 10
[ 207.535644] lo: Disabled Privacy Extensions
[ 218.104399] br0: no IPv6 routers present
[ 218.172399] eth0: no IPv6 routers present
[-- Attachment #3: config-2.6.31-09061-g6d7f18f-dirty --]
[-- Type: application/octet-stream, Size: 61867 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31
# Sat Sep 26 00:07:08 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not set
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_PARIDE=y
#
# Parallel IDE high-level drivers
#
# CONFIG_PARIDE_PD is not set
CONFIG_PARIDE_PCD=y
# CONFIG_PARIDE_PF is not set
# CONFIG_PARIDE_PT is not set
# CONFIG_PARIDE_PG is not set
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=40
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=m
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
CONFIG_SND_HDA_CODEC_CA0110=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Regression: kernels since 2.6.26 are unusably slow
2009-09-26 1:02 ` Aneurin Price
@ 2009-09-26 1:47 ` Yinghai Lu
2009-09-26 2:49 ` Robert Hancock
0 siblings, 1 reply; 7+ messages in thread
From: Yinghai Lu @ 2009-09-26 1:47 UTC (permalink / raw)
To: Aneurin Price
Cc: Frans Pop, linux-kernel, Yinghai Lu, Ingo Molnar, Thomas Gleixner
On Fri, Sep 25, 2009 at 6:02 PM, Aneurin Price <aneurin.price@gmail.com> wrote:
> Hmm. Looking at dmesg for a 'working' kernel includes an interesting part which
> I foolishly forgot to save, saying that the last 512MB of memory is
> inaccessible (I was wondering where that last half-gig had gone :-)). I can go
> and check exactly what it says, but I don't have the energy left for any more
> reboots today. Anyway, that prompted me to try booting with mem=7168 - and that
> makes the problem go away. Perhaps that will shed some light on things.
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 100000000 mask FE0000000 write-back
[ 0.000000] 1 base 100000000 mask F00000000 write-back
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0DFF00000 mask FFFF00000 write-through
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
looks like your MTRR has some problem, and with that WRITE-THROUGH
there, the trimming e820 will not happen
YH
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Regression: kernels since 2.6.26 are unusably slow
2009-09-26 1:47 ` Yinghai Lu
@ 2009-09-26 2:49 ` Robert Hancock
2009-09-26 22:51 ` Aneurin Price
0 siblings, 1 reply; 7+ messages in thread
From: Robert Hancock @ 2009-09-26 2:49 UTC (permalink / raw)
To: Yinghai Lu
Cc: Aneurin Price, Frans Pop, linux-kernel, Yinghai Lu, Ingo Molnar,
Thomas Gleixner
On 09/25/2009 07:47 PM, Yinghai Lu wrote:
> On Fri, Sep 25, 2009 at 6:02 PM, Aneurin Price<aneurin.price@gmail.com> wrote:
>
>> Hmm. Looking at dmesg for a 'working' kernel includes an interesting part which
>> I foolishly forgot to save, saying that the last 512MB of memory is
>> inaccessible (I was wondering where that last half-gig had gone :-)). I can go
>> and check exactly what it says, but I don't have the energy left for any more
>> reboots today. Anyway, that prompted me to try booting with mem=7168 - and that
>> makes the problem go away. Perhaps that will shed some light on things.
>
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
> [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CDFFF write-protect
> [ 0.000000] CE000-EFFFF uncachable
> [ 0.000000] F0000-FFFFF write-through
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 100000000 mask FE0000000 write-back
> [ 0.000000] 1 base 100000000 mask F00000000 write-back
> [ 0.000000] 2 base 000000000 mask F00000000 write-back
> [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
> [ 0.000000] 4 base 0DFF00000 mask FFFF00000 write-through
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
>
> looks like your MTRR has some problem, and with that WRITE-THROUGH
> there, the trimming e820 will not happen
You might want to see if there's a BIOS update available for that
system/motherboard..
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Regression: kernels since 2.6.26 are unusably slow
2009-09-25 22:09 Regression: kernels since 2.6.26 are unusably slow Aneurin Price
2009-09-25 22:51 ` Frans Pop
@ 2009-09-26 7:20 ` Arjan van de Ven
1 sibling, 0 replies; 7+ messages in thread
From: Arjan van de Ven @ 2009-09-26 7:20 UTC (permalink / raw)
To: Aneurin Price; +Cc: linux-kernel
On Fri, 25 Sep 2009 23:09:32 +0100
Aneurin Price <aneurin.price@gmail.com> wrote:
> Hi,
> Every kernel since 2.6.26 has been unusably slow for me - to the
> extent that I initially thought they were hanging on boot. Exactly
> how bad it is seems to vary, but it could take several minutes to
> boot, and then another minute or two to log in (with bash pegging the
> CPU as it loads). Everything seems to need vastly more CPU time than
> usual - it feels a little like I'm using a 486.
means part of memory is uncached.
>
> I've bisected the problem down to commit
> 42651f15824d003e8357693ab72c4dbb3e280836 (x86: fix trimming e820 with
> MTRR holes). Having basically no idea what that means, I thought I'd
> try building a kernel with MTRRs disabled, to see if that would make
> any difference, but no joy.
b0rked MTRRs will do that to you ;-)
>
> Can anyone give me some idea of where to go next, or let me know what
> further information I should provide?
>
one thing to try is enabling CONFIG_MTRR_SANITIZER as config option;
that lets linux rewrite all MTRRs to see if it can puzzle a combination
together that fits all your memory...
--
Arjan van de Ven Intel Open Source Technology Centre
For development, discussion and tips for power savings,
visit http://www.lesswatts.org
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Regression: kernels since 2.6.26 are unusably slow
2009-09-26 2:49 ` Robert Hancock
@ 2009-09-26 22:51 ` Aneurin Price
0 siblings, 0 replies; 7+ messages in thread
From: Aneurin Price @ 2009-09-26 22:51 UTC (permalink / raw)
To: Robert Hancock
Cc: Yinghai Lu, Frans Pop, linux-kernel, Yinghai Lu, Ingo Molnar,
Thomas Gleixner
On Sat, Sep 26, 2009 at 03:49, Robert Hancock <hancockrwd@gmail.com> wrote:
> On 09/25/2009 07:47 PM, Yinghai Lu wrote:
>>
>> On Fri, Sep 25, 2009 at 6:02 PM, Aneurin Price<aneurin.price@gmail.com>
>> wrote:
>>
>>> Hmm. Looking at dmesg for a 'working' kernel includes an interesting part
>>> which
>>> I foolishly forgot to save, saying that the last 512MB of memory is
>>> inaccessible (I was wondering where that last half-gig had gone :-)). I
>>> can go
>>> and check exactly what it says, but I don't have the energy left for any
>>> more
>>> reboots today. Anyway, that prompted me to try booting with mem=7168 -
>>> and that
>>> makes the problem go away. Perhaps that will shed some light on things.
>>
>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
>> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
>> [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
>> [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
>> [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
>> [ 0.000000] DMI 2.4 present.
>> [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
>> [ 0.000000] MTRR default type: uncachable
>> [ 0.000000] MTRR fixed ranges enabled:
>> [ 0.000000] 00000-9FFFF write-back
>> [ 0.000000] A0000-BFFFF uncachable
>> [ 0.000000] C0000-CDFFF write-protect
>> [ 0.000000] CE000-EFFFF uncachable
>> [ 0.000000] F0000-FFFFF write-through
>> [ 0.000000] MTRR variable ranges enabled:
>> [ 0.000000] 0 base 100000000 mask FE0000000 write-back
>> [ 0.000000] 1 base 100000000 mask F00000000 write-back
>> [ 0.000000] 2 base 000000000 mask F00000000 write-back
>> [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
>> [ 0.000000] 4 base 0DFF00000 mask FFFF00000 write-through
>> [ 0.000000] 5 disabled
>> [ 0.000000] 6 disabled
>> [ 0.000000] 7 disabled
>>
>> looks like your MTRR has some problem, and with that WRITE-THROUGH
>> there, the trimming e820 will not happen
>
> You might want to see if there's a BIOS update available for that
> system/motherboard..
>
Slightly surprisingly to me, after spending two and a half hours figuring out a
way to update the BIOS, it actually worked:
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
I do wish I understood this better, but I suppose that'll have to be a topic for
future research.
Given that I'm no longer having the problem, this isn't of pressing importance
to me so is purely informational:
CONFIG_MTRR_SANITIZER didn't help[0], though I didn't try changing the value of
MTRR_SANITIZER_SPARE_REG_NR_DEFAULT. I also tried mtrr-uncover which I learned
about from http://kerneltrap.org/mailarchive/linux-kernel/2008/9/30/3454074, and
that didn't help either. However, the thing that makes me bother mentioning all
this is that I tried booting Windows XP (64bit) before updating the BIOS, and
that worked fine with the full 8GB of RAM. This indicates to me that whatever
the problem, it wasn't insurmountable, so in principle Linux could do better.
If it doesn't seem worth looking into further then that's perfectly
understandable, but if anyone is interested and would like any more information,
let me know.
Thank you all for your suggestions,
Nye
[0] Google indicated that passing the boot param 'enable_mtrr_cleanup' would be
appropriate; I don't know if that's correct, and I don't really understand the
wording on MTRR_SANITIZER_ENABLE_DEFAULT. I got the impression that the optional
0 or 1 value just means 'enable MTRR cleanup or not', and is overridden by the
boot parameter. Maybe that option would be worth clarifying?
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-09-26 22:51 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-25 22:09 Regression: kernels since 2.6.26 are unusably slow Aneurin Price
2009-09-25 22:51 ` Frans Pop
2009-09-26 1:02 ` Aneurin Price
2009-09-26 1:47 ` Yinghai Lu
2009-09-26 2:49 ` Robert Hancock
2009-09-26 22:51 ` Aneurin Price
2009-09-26 7:20 ` Arjan van de Ven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).