Re: [PATCH 4/6] docs: correct gpio.txt typos

Re: [PATCH 4/6] docs: correct gpio.txt typos

[David Brownell]

On Sunday 06 December 2009, Randy Dunlap wrote:
> From: Dominik D. Geyer <dominik.geyer@gmx.de>
> Subject: correct gpio.txt typos
> 
> Corrected sysfs gpio chip node name and fixed punctuation.
> 
> Signed-off-by: Dominik D. Geyer <dominik.geyer@gmx.de>
> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
> Cc: David Brownell <dbrownell@users.sourceforge.net>

Ack.

> ---
>  Documentation/gpio.txt |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> --- lnx-2632-rc6.orig/Documentation/gpio.txt
> +++ lnx-2632-rc6/Documentation/gpio.txt
> @@ -380,7 +380,7 @@ rare; use gpiochip_remove() when it is u
>  
>  Most often a gpio_chip is part of an instance-specific structure with state
>  not exposed by the GPIO interfaces, such as addressing, power management,
> -and more.  Chips such as codecs will have complex non-GPIO state,
> +and more.  Chips such as codecs will have complex non-GPIO state.
>  
>  Any debugfs dump method should normally ignore signals which haven't been
>  requested as GPIOs.  They can use gpiochip_is_requested(), which returns
> @@ -531,7 +531,7 @@ and have the following read/write attrib
>  		This file exists only if the pin can be configured as an
>  		interrupt generating input pin.
>  
> -GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the
> +GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
>  controller implementing GPIOs starting at #42) and have the following
>  read-only attributes:
>  
> 
> 
> -- 
> 
>