* [regression] 2.6.37-rc1: Freeze while booting on HP nx6325
@ 2010-11-24 14:01 Grzegorz Chwesewicz
2010-11-24 19:30 ` Bjorn Helgaas
0 siblings, 1 reply; 3+ messages in thread
From: Grzegorz Chwesewicz @ 2010-11-24 14:01 UTC (permalink / raw)
To: linux-kernel, bjorn.helgaas, jbarnes
Hi, I have a problem with 2.6.37-rc1. My HP nx6325 freezes during boot.
It happens after printing lines:
[ 0.298457] atiixp 0000:00:14.1: not 100% native mode: will probe
irqs later
[ 0.298515] ide0: BM-DMA at 0x7040-0x7047
[ 0.298573] atiixp 0000:00:14.1: simplex device: DMA disabled
[ 0.298625] ide1: DMA disabled
<Freeze>
This didn't happen in 2.6.36. I bisected between 2.6.36 and 2.6.37-rc1:
1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9 is the first bad commit
commit 1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9
Author: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Tue Oct 26 15:41:54 2010 -0600
x86: allocate space within a region top-down
Request that allocate_resource() use available space from high addresses
first, rather than the default of using low addresses first.
The most common place this makes a difference is when we move or assign
new PCI device resources. Low addresses are generally scarce, so it's
better to use high addresses when possible. This follows Windows
practice
for PCI allocation.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c42
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reverting above patch from latest linus-tree resolves problem.
My lspci:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA
Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host
Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
(rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition
Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon
Xpress 200M]
02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788
Gigabit Ethernet (rev 03)
02:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant
IEEE 1394 Host Controller
02:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia
Card Reader (SD/MMC/MS/MS PRO/xD)
02:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard
Compliant SD Host Controller
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet (rev 10)
30:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g
(rev 01)
Please CC to me, as I'm not subscribed to the list.
--
Greetings
Grzegorz Chwesewicz
mailto:grzegorz.chwesewicz@retis.net.pl
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [regression] 2.6.37-rc1: Freeze while booting on HP nx6325
2010-11-24 14:01 [regression] 2.6.37-rc1: Freeze while booting on HP nx6325 Grzegorz Chwesewicz
@ 2010-11-24 19:30 ` Bjorn Helgaas
2010-11-25 8:19 ` Grzegorz Chwesewicz
0 siblings, 1 reply; 3+ messages in thread
From: Bjorn Helgaas @ 2010-11-24 19:30 UTC (permalink / raw)
To: Grzegorz Chwesewicz; +Cc: linux-kernel, jbarnes
On Wednesday, November 24, 2010 07:01:28 am Grzegorz Chwesewicz wrote:
> Hi, I have a problem with 2.6.37-rc1. My HP nx6325 freezes during boot.
> It happens after printing lines:
>
> [ 0.298457] atiixp 0000:00:14.1: not 100% native mode: will probe
> irqs later
> [ 0.298515] ide0: BM-DMA at 0x7040-0x7047
> [ 0.298573] atiixp 0000:00:14.1: simplex device: DMA disabled
> [ 0.298625] ide1: DMA disabled
> <Freeze>
I think this is the same problem as
https://bugzilla.kernel.org/show_bug.cgi?id=23332
If you have more of the log, that would be useful, but I doubt you
do because I don't think the nx6325 has a serial port. I do have
a sample of that system, so I'm hoping to learn something about it
today.
Thanks for the report!
Bjorn
> This didn't happen in 2.6.36. I bisected between 2.6.36 and 2.6.37-rc1:
>
> 1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9 is the first bad commit
> commit 1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9
> Author: Bjorn Helgaas <bjorn.helgaas@hp.com>
> Date: Tue Oct 26 15:41:54 2010 -0600
>
> x86: allocate space within a region top-down
>
> Request that allocate_resource() use available space from high addresses
> first, rather than the default of using low addresses first.
>
> The most common place this makes a difference is when we move or assign
> new PCI device resources. Low addresses are generally scarce, so it's
> better to use high addresses when possible. This follows Windows
> practice
> for PCI allocation.
>
> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c42
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
>
> Reverting above patch from latest linus-tree resolves problem.
>
> My lspci:
>
> 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
> 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA
> Controller (rev 80)
> 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
> Controller (rev 80)
> 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host
> Controller (rev 80)
> 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
> Controller (rev 80)
> 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
> 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
> (rev 80)
> 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition
> Audio Controller (rev 01)
> 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
> 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
>
> 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon
> Xpress 200M]
>
> 02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788
> Gigabit Ethernet (rev 03)
>
> 02:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
>
>
> 02:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant
> IEEE 1394 Host Controller
>
> 02:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia
> Card Reader (SD/MMC/MS/MS PRO/xD)
>
> 02:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard
> Compliant SD Host Controller
>
> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
> Gigabit Ethernet (rev 10)
>
> 30:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g
> (rev 01)
>
> Please CC to me, as I'm not subscribed to the list.
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [regression] 2.6.37-rc1: Freeze while booting on HP nx6325
2010-11-24 19:30 ` Bjorn Helgaas
@ 2010-11-25 8:19 ` Grzegorz Chwesewicz
0 siblings, 0 replies; 3+ messages in thread
From: Grzegorz Chwesewicz @ 2010-11-25 8:19 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-kernel, jbarnes
Bjorn Helgaas pisze:
> On Wednesday, November 24, 2010 07:01:28 am Grzegorz Chwesewicz wrote:
>> Hi, I have a problem with 2.6.37-rc1. My HP nx6325 freezes during boot.
>> It happens after printing lines:
>>
>> [ 0.298457] atiixp 0000:00:14.1: not 100% native mode: will probe
>> irqs later
>> [ 0.298515] ide0: BM-DMA at 0x7040-0x7047
>> [ 0.298573] atiixp 0000:00:14.1: simplex device: DMA disabled
>> [ 0.298625] ide1: DMA disabled
>> <Freeze>
>
> I think this is the same problem as
> https://bugzilla.kernel.org/show_bug.cgi?id=23332
>
> If you have more of the log, that would be useful, but I doubt you
> do because I don't think the nx6325 has a serial port.
It doesn't have serial port, I tried with console on USB<->serial
converter, but it is initialized too late to dump something.
I do have
> a sample of that system, so I'm hoping to learn something about it
> today.
--
Greetings
Grzegorz Chwesewicz
grzegorz.chwesewicz@retis.net.pl
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-11-25 8:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-11-24 14:01 [regression] 2.6.37-rc1: Freeze while booting on HP nx6325 Grzegorz Chwesewicz
2010-11-24 19:30 ` Bjorn Helgaas
2010-11-25 8:19 ` Grzegorz Chwesewicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).