linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* linux-next: Tree for Aug 24
@ 2011-08-24  6:04 Stephen Rothwell
  2011-08-24 17:25 ` linux-next: Tree for Aug 24 (dynamic_debug) Randy Dunlap
  2011-08-25  1:38 ` linux-next: Tree for Aug 24 Arnaud Lacombe
  0 siblings, 2 replies; 9+ messages in thread
From: Stephen Rothwell @ 2011-08-24  6:04 UTC (permalink / raw)
  To: linux-next; +Cc: LKML

[-- Attachment #1: Type: text/plain, Size: 16194 bytes --]

Hi all,

The powerpc allyesconfig build still fails today.

Changes since 20110823:

New tree: kvmtool

The security tree lost its build failure.

The ptrace tree gained a build failure (yeaterday) for which I have
reveretd a commit.

The tty tree gained a build failure so I used the version from
next-20110823.

The staging tree gained a conflict against the fbdev tree and a build
failure for which I reverted a commit.

The moduleh tree gained a conflict against the staging tree.

----------------------------------------------------------------------------

I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ).  If you
are tracking the linux-next tree using git, you should not use "git pull"
to do so as that will try to merge the new linux-next release with the
old one.  You should use "git fetch" as mentioned in the FAQ on the wiki
(see below).

You can see which trees have been included by looking in the Next/Trees
file in the source.  There are also quilt-import.log and merge.log files
in the Next directory.  Between each merge, the tree was built with
a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
final fixups (if any), it is also built with powerpc allnoconfig (32 and
64 bit), ppc44x_defconfig and allyesconfig (minus
CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc
and sparc64 defconfig. These builds also have
CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and
CONFIG_DEBUG_INFO disabled when necessary.

Below is a summary of the state of the merge.

We are up to 199 trees (counting Linus' and 28 trees of patches pending
for Linus' tree), more are welcome (even if they are currently empty).
Thanks to those who have contributed, and to those who haven't, please do.

Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next .  If maintainers want to give
advice about cross compilers/configs that work, we are always open to add
more builds.

Thanks to Randy Dunlap for doing many randconfig builds.

There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ .  Thanks to Frank Seidel.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

$ git checkout master
$ git reset --hard stable
Merging origin/master
Merging fixes/fixes
Merging kbuild-current/rc-fixes
Merging arm-current/master
Merging m68k-current/for-linus
Merging powerpc-merge/merge
Merging 52xx-and-virtex-current/powerpc/merge
Merging sparc-current/master
Merging scsi-rc-fixes/master
Merging net-current/master
Merging sound-current/for-linus
Merging pci-current/for-linus
Merging wireless-current/master
Merging driver-core.current/driver-core-linus
Merging tty.current/tty-linus
Merging usb.current/usb-linus
Merging staging.current/staging-linus
Merging cpufreq-current/fixes
Merging input-current/for-linus
Merging md-current/for-linus
Merging audit-current/for-linus
Merging crypto-current/master
Merging ide-curent/master
Merging dwmw2/master
Merging sh-current/sh-fixes-for-linus
Merging rmobile-current/rmobile-fixes-for-linus
Merging fbdev-current/fbdev-fixes-for-linus
Merging devicetree-current/devicetree/merge
Merging spi-current/spi/merge
Merging arm/for-next
Merging arm-lpae/for-next
CONFLICT (content): Merge conflict in arch/arm/include/asm/pgalloc.h
CONFLICT (content): Merge conflict in arch/arm/include/asm/pgtable.h
CONFLICT (content): Merge conflict in arch/arm/include/asm/tlb.h
Merging arm-soc/for-next
Merging at91/at91-next
Merging davinci/davinci-next
Merging i.MX/for-next
Merging linux-spec/for-next
Merging msm/for-next
CONFLICT (content): Merge conflict in arch/arm/mach-msm/io.c
Merging omap/for-next
Merging pxa/for-next
Merging samsung/next-samsung
Merging s5p/for-next
Merging tegra/for-next
Merging ux500-core/ux500-core
Merging xilinx/arm-next
Merging blackfin/for-linus
Merging cris/for-next
Merging ia64/test
Merging m68k/for-next
Merging m68knommu/for-next
Merging microblaze/next
Merging mips/mips-for-linux-next
Merging openrisc/for-upstream
Merging parisc/for-next
Merging powerpc/next
Merging 4xx/next
Merging 52xx-and-virtex/powerpc/next
Merging galak/next
Merging s390/features
Merging sh/sh-latest
Merging rmobile/rmobile-latest
Merging sparc/master
Merging tile/master
Merging unicore32/unicore32
Merging xtensa/master
Merging ceph/for-next
Merging cifs/master
Merging configfs/linux-next
Merging ecryptfs/next
Merging ext3/for_next
Merging ext4/dev
Merging fatfs/master
Merging fuse/for-next
Merging gfs2/master
Merging hfsplus/for-next
Merging jfs/next
Merging logfs/master
Merging nfs/linux-next
Merging nfsd/nfsd-next
Merging nilfs2/for-next
Merging ocfs2/linux-next
Merging omfs/for-next
Merging squashfs/master
Merging udf/for_next
Merging v9fs/for-next
Merging ubifs/linux-next
Merging xfs/master
Merging vfs/for-next
Merging vfs-scale/vfs-scale-working
Merging pci/linux-next
Merging hid/for-next
Merging quilt/i2c
Merging bjdooks-i2c/next-i2c
Merging quilt/jdelvare-hwmon
Merging hwmon-staging/hwmon-next
Merging quilt/kernel-doc
Merging docs/docs-move
Merging v4l-dvb/master
Merging kbuild/for-next
Merging kconfig/for-next
Merging ide/master
Merging libata/NEXT
Merging infiniband/for-next
Merging acpi/test
Merging idle-test/idle-test
Merging powertools/tools-test
Merging cpupowerutils/master
Merging ieee1394/for-next
Merging ubi/linux-next
Merging dlm/next
Merging swiotlb/master
Merging ibft/master
Merging scsi/master
Merging iscsi-target/for-next
Merging slave-dma/next
Merging async_tx/next
Merging net/master
CONFLICT (delete/modify): arch/powerpc/configs/40x/hcu4_defconfig deleted in HEAD and modified in net/master. Version net/master of arch/powerpc/configs/40x/hcu4_defconfig left in tree.
CONFLICT (content): Merge conflict in drivers/net/Kconfig
CONFLICT (content): Merge conflict in drivers/net/Makefile
$ git rm -f arch/powerpc/configs/40x/hcu4_defconfig
Applying: powerpc: update ppc64_defconfig for net device movement
Applying: sparc: update sparc32_defconfig for net device movement
Applying: sparc: update sparc64_defconfig for net device movement
Merging wireless/master
Merging bluetooth/master
Merging mtd/master
Merging l2-mtd/master
CONFLICT (content): Merge conflict in drivers/mtd/maps/lantiq-flash.c
Merging crypto/master
Merging sound/for-next
Merging sound-asoc/for-next
Merging cpufreq/next
Merging quilt/rr
Merging input/next
Merging input-mt/next
Merging lsm/for-next
Merging block/for-next
Merging quilt/device-mapper
Merging embedded/master
Merging firmware/master
Merging pcmcia/master
Merging battery/master
Merging leds/for-mm
CONFLICT (content): Merge conflict in drivers/leds/Kconfig
Merging backlight/for-mm
Merging mmc/mmc-next
Merging kgdb/kgdb-next
Merging slab/for-next
Merging uclinux/for-next
Merging md/for-next
Merging mfd/for-next
Merging hdlc/hdlc-next
Merging drm/drm-next
Merging fbdev/master
Merging viafb/viafb-next
Merging omap_dss2/for-next
Merging voltage/for-next
Merging security/next
CONFLICT (content): Merge conflict in fs/ocfs2/xattr.c
Merging selinux/master
Merging lblnet/master
Merging agp/agp-next
Merging watchdog/master
Merging bdev/master
Merging dwmw2-iommu/master
Merging cputime/cputime
Merging osd/linux-next
Merging jc_docs/docs-next
Merging nommu/master
Merging trivial/for-next
Merging audit/for-next
Merging pm/linux-next
CONFLICT (content): Merge conflict in arch/s390/include/asm/thread_info.h
CONFLICT (content): Merge conflict in drivers/mfd/twl4030-irq.c
Merging apm/for-next
Merging fsnotify/for-next
Merging irda/for-next
Merging i7core_edac/linux_next
Merging i7300_edac/linux_next
CONFLICT (content): Merge conflict in arch/x86/kernel/cpu/mcheck/mce.c
Merging devicetree/devicetree/next
CONFLICT (content): Merge conflict in drivers/of/base.c
Merging spi/spi/next
Merging gpio/gpio/next
Merging tip/auto-latest
CONFLICT (content): Merge conflict in arch/x86/mm/fault.c
Merging rcu/rcu/next
Merging kvm/linux-next
Merging oprofile/for-next
Merging ptrace/ptrace
[master 12688b4] Revert "signal: Add block_sigmask() for adding sigmask to current->blocked"
Merging xen/upstream/xen
Merging xen-two/linux-next
Merging xen-pvhvm/linux-next
Merging edac-amd/for-next
Merging percpu/for-next
Merging workqueues/for-next
Merging sfi/sfi-test
Merging asm-generic/next
Merging drivers-x86/linux-next
Merging hwpoison/hwpoison
Merging sysctl/master
Merging namespace/master
Merging regmap/for-next
Merging driver-core/driver-core-next
Merging tty/tty-next
$ git reset --hard HEAD^
Merging refs/next/20110823/tty
Merging usb/usb-next
Applying: usb: include module.h in the DesignWare USB3 DRD driver
Merging staging/staging-next
CONFLICT (content): Merge conflict in drivers/staging/xgifb/XGI_main_26.c
Merging bkl-config/config
Merging tmem/linux-next
Merging writeback/next
Merging arm-dt/devicetree/arm-next
Merging moduleh/module.h-split
CONFLICT (content): Merge conflict in drivers/staging/iio/accel/adis16220_core.c
CONFLICT (content): Merge conflict in include/linux/dmaengine.h
Applying: dm: use export.h instead of module.h where possible
Applying: block: bsg-lib.c needs export.h not module.h
Applying: PM: EXPORT_SYMBOL needs export.h
Merging kvmtool/master
CONFLICT (content): Merge conflict in include/net/9p/9p.h
Merging scsi-post-merge/merge-base:master
$ git checkout akpm
Applying: Expand root=PARTUUID=UUID syntax to support selecting a root partition by
Applying: This patch makes two changes:
Applying: On thread exit shm_exit_ns() is called, it uses shm_ids(ns).rw_mutex.  It
Applying: Because of x86-implement-strict-user-copy-checks-for-x86_64.patch
Applying: When no floppy is found the module code can be released while a timer
Applying: The parameter's origin type is long.  On an i386 architecture, it can
Applying: Add support for Aspire 1410 BIOS v1.3314.  Fixes the following error:
Applying: This makes the iris driver use the platform API, so it is properly exposed
Applying: On x86_32 casting the unsigned int result of get_random_int() to long may
Applying: This new driver replaces the old PCEngines Alix 2/3 LED driver with a new
Applying: Cc: Ed Wildgoose <git@wildgooses.com>
Applying: Replace the bubble sort in sanitize_e820_map() with a call to the generic
Applying: The x86 timer interrupt handler is the only handler not traced in the
Applying: The current interrupt traces from irq_handler_entry and irq_handler_exit
Applying: Don't allow everybody to use a modem.
Applying: The address limit is already set in flush_old_exec() so this
Applying: A call to va_copy() should always be followed by a call to va_end() in the
Applying: Don't dereference em if it's NULL or an error pointer.
Applying: Some messing with error codes to return 0 on out id's and match
Applying: fb_set_suspend() must be called with the console semaphore held, which
Applying: hwmon was using an idr with a NULL pointer, so convert to an
Applying: A straightforward looking use of idr for a device id.
Applying: The address limit is already set in flush_old_exec() so this
Applying: The address limit is already set in flush_old_exec() so this
Applying: Add new check (assert_init) to make sure objects are initialized and
Applying: del_timer_sync() calls debug_object_assert_init() to assert that a timer
Applying: ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
Applying: The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned,
Applying: The address limit is already set in flush_old_exec() so those calls to
Applying: When do pci remove/rescan on system that have more iommus, got
Applying: The current implementation of dmi_name_in_vendors() is an invitation to
Applying: For headers that get exported to userland and make use of u32 style
Applying: Fix sparse warnings of right shift bigger than source value size:
Applying: We leak in drivers/scsi/aacraid/commctrl.c::aac_send_raw_srb() :
Applying: Some mangling of errors was necessary to maintain current interface.
Applying: This does involve additional use of the spin lock in idr.c.  Is this an
Applying: Instead of open coding this function use kstrtoul_from_user() directly.
Applying: brd_make_request() always returns 0, which doesn't make much sense.
Applying: The address limit is already set in flush_old_exec() so this assignment of
Applying: The basic idea behind cross memory attach is to allow MPI programs doing
Applying: - Add x86_64 specific wire up
Applying: acct_isolated of compaction uses page_lru_base_type which returns only
Applying: Change ISOLATE_XXX macro with bitwise isolate_mode_t type.  Normally,
Applying: In async mode, compaction doesn't migrate dirty or writeback pages.  So,
Applying: In __zone_reclaim case, we don't want to shrink mapped page.  Nonetheless,
Applying: unmap_and_move() is one a big messy function.  Clean it up.
Applying: radix_tree_tag_get()'s BUG (when it sees a tag after saw_unset_tag) was
Applying: per-task block plug can reduce block queue lock contention and increase
Applying: The tracing ring-buffer used this function briefly, but not anymore.
Applying: After selecting a task to kill, the oom killer iterates all processes and
Applying: Remove PageSwapBacked (!page_is_file_cache) cases from
Applying: Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Applying: The current implementation of the /dev/hpet driver couples opening the
Applying: smp_call_function() only lets all other CPUs execute a specific function,
Applying: auto_demotion_disable is called only for online CPUs.  For hotplugged
Applying: Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning:
Applying: Strict user copy checks are only really supported on x86_32 even though
Applying: The help text for this config is duplicated across the x86, parisc, and
Applying: s/lib-/obj-/ for usercopy.o
Applying: After an "unexpected" reboot, I found this Oops in my logs:
Applying: In the move of the lis3 driver, the hp_accel.c file got dropped from the
Applying: Add axis correction for HP EliteBook 2730p.
Applying: Add axis correction for HP EliteBook 8540w.
Applying: Add axis correction for HP ProBook 6555b.
Applying: Adapt the help text for CONFIG_HP_ACCEL to the move of
Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Applying: Change exported functions to use the device given as parameter
Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Applying: Add V2 of the LED driver for a single timer channel for the TPU hardware
Applying: Add support for slice by 8 to existing crc32 algorithm.  Also modify
Applying: don't include asm/msr.h
Applying: This is the one use of an ida that doesn't retry on receiving -EAGAIN.
Applying: One can get this information from minix/inode.c, but adding the
Applying: Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Applying: Force this on for -next/mm testing purposes.
Applying: Add a proc_dointvec_bool() sysctl handler for cases where the input value
Applying: Use the new proc_do_intvec_bool() handler for various boolean inputs.
Applying: Add a proc_dointvec_unsigned() sysctl handler for positive value cases.
Applying: Cc: Alexey Dobriyan <adobriyan@gmail.com>
Applying: Use the new proc_do_intvec_unsigned() handler for various unsigned inputs.
Applying: A default echo function has been provided so it is no longer an error when
Applying: This client driver allows you to use a GPIO pin as a source for PPS
Applying: remove unneeded cast of void*
Applying: Straightforward.  As an aside, the ida_init calls are not needed as far as
Merging akpm
Applying: do_mounts: remove __init_data from root_wait
[master 9cba48a] Revert "Staging: add driver for Realtek RTS5139 cardreader"

[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: linux-next: Tree for Aug 24 (dynamic_debug)
  2011-08-24  6:04 linux-next: Tree for Aug 24 Stephen Rothwell
@ 2011-08-24 17:25 ` Randy Dunlap
  2011-08-24 19:32   ` Jason Baron
  2011-08-25  1:38 ` linux-next: Tree for Aug 24 Arnaud Lacombe
  1 sibling, 1 reply; 9+ messages in thread
From: Randy Dunlap @ 2011-08-24 17:25 UTC (permalink / raw)
  To: Stephen Rothwell, Jason Baron, Bart Van Assche; +Cc: linux-next, LKML

On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:

> Hi all,

When CONFIG_NET is not enabled (I see this on i386 builds):

lib/built-in.o: In function `__dynamic_netdev_dbg':
(.text+0x9fda): undefined reference to `__netdev_printk'

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: linux-next: Tree for Aug 24 (dynamic_debug)
  2011-08-24 17:25 ` linux-next: Tree for Aug 24 (dynamic_debug) Randy Dunlap
@ 2011-08-24 19:32   ` Jason Baron
  2011-08-24 19:42     ` Randy Dunlap
  0 siblings, 1 reply; 9+ messages in thread
From: Jason Baron @ 2011-08-24 19:32 UTC (permalink / raw)
  To: Randy Dunlap; +Cc: Stephen Rothwell, Bart Van Assche, linux-next, LKML, greg

On Wed, Aug 24, 2011 at 10:25:51AM -0700, Randy Dunlap wrote:
> On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
> 
> > Hi all,
> 
> When CONFIG_NET is not enabled (I see this on i386 builds):
> 
> lib/built-in.o: In function `__dynamic_netdev_dbg':
> (.text+0x9fda): undefined reference to `__netdev_printk'
> 
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***

Ok, we probably want something, like below, although something keeps
selecting CONFIG_NET, when I try to unset it, in my .config...so not yet
tested, but should work.

Thanks,

-Jason


diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index ee3b9ba..e4760de 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -504,6 +504,8 @@ int __dynamic_dev_dbg(struct _ddebug *descriptor,
 }
 EXPORT_SYMBOL(__dynamic_dev_dbg);
 
+#ifdef CONFIG_NET
+
 int __dynamic_netdev_dbg(struct _ddebug *descriptor,
 		      const struct net_device *dev, const char *fmt, ...)
 {
@@ -528,6 +530,8 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor,
 }
 EXPORT_SYMBOL(__dynamic_netdev_dbg);
 
+#endif
+
 static __initdata char ddebug_setup_string[1024];
 static __init int ddebug_setup_query(char *str)
 {

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: linux-next: Tree for Aug 24 (dynamic_debug)
  2011-08-24 19:32   ` Jason Baron
@ 2011-08-24 19:42     ` Randy Dunlap
  2011-08-24 21:09       ` Greg KH
  0 siblings, 1 reply; 9+ messages in thread
From: Randy Dunlap @ 2011-08-24 19:42 UTC (permalink / raw)
  To: Jason Baron; +Cc: Stephen Rothwell, Bart Van Assche, linux-next, LKML, greg

On Wed, 24 Aug 2011 15:32:45 -0400 Jason Baron wrote:

> On Wed, Aug 24, 2011 at 10:25:51AM -0700, Randy Dunlap wrote:
> > On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
> > 
> > > Hi all,
> > 
> > When CONFIG_NET is not enabled (I see this on i386 builds):
> > 
> > lib/built-in.o: In function `__dynamic_netdev_dbg':
> > (.text+0x9fda): undefined reference to `__netdev_printk'
> > 
> > ---
> > ~Randy
> > *** Remember to use Documentation/SubmitChecklist when testing your code ***
> 
> Ok, we probably want something, like below, although something keeps
> selecting CONFIG_NET, when I try to unset it, in my .config...so not yet
> tested, but should work.

Yes, that works.  Thanks.

Acked-by: Randy Dunlap <rdunlap@xenotime.net>



> Thanks,
> 
> -Jason
> 
> 
> diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
> index ee3b9ba..e4760de 100644
> --- a/lib/dynamic_debug.c
> +++ b/lib/dynamic_debug.c
> @@ -504,6 +504,8 @@ int __dynamic_dev_dbg(struct _ddebug *descriptor,
>  }
>  EXPORT_SYMBOL(__dynamic_dev_dbg);
>  
> +#ifdef CONFIG_NET
> +
>  int __dynamic_netdev_dbg(struct _ddebug *descriptor,
>  		      const struct net_device *dev, const char *fmt, ...)
>  {
> @@ -528,6 +530,8 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor,
>  }
>  EXPORT_SYMBOL(__dynamic_netdev_dbg);
>  
> +#endif
> +
>  static __initdata char ddebug_setup_string[1024];
>  static __init int ddebug_setup_query(char *str)
>  {


---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: linux-next: Tree for Aug 24 (dynamic_debug)
  2011-08-24 19:42     ` Randy Dunlap
@ 2011-08-24 21:09       ` Greg KH
  2011-09-26 23:17         ` David Brown
  0 siblings, 1 reply; 9+ messages in thread
From: Greg KH @ 2011-08-24 21:09 UTC (permalink / raw)
  To: Randy Dunlap
  Cc: Jason Baron, Stephen Rothwell, Bart Van Assche, linux-next, LKML

On Wed, Aug 24, 2011 at 12:42:48PM -0700, Randy Dunlap wrote:
> On Wed, 24 Aug 2011 15:32:45 -0400 Jason Baron wrote:
> 
> > On Wed, Aug 24, 2011 at 10:25:51AM -0700, Randy Dunlap wrote:
> > > On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
> > > 
> > > > Hi all,
> > > 
> > > When CONFIG_NET is not enabled (I see this on i386 builds):
> > > 
> > > lib/built-in.o: In function `__dynamic_netdev_dbg':
> > > (.text+0x9fda): undefined reference to `__netdev_printk'
> > > 
> > > ---
> > > ~Randy
> > > *** Remember to use Documentation/SubmitChecklist when testing your code ***
> > 
> > Ok, we probably want something, like below, although something keeps
> > selecting CONFIG_NET, when I try to unset it, in my .config...so not yet
> > tested, but should work.
> 
> Yes, that works.  Thanks.
> 
> Acked-by: Randy Dunlap <rdunlap@xenotime.net>

Nice.

Jason, care to resend this, with a proper signed-off-by, so that I can
apply it to fix this build error?

thanks

greg k-h

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: linux-next: Tree for Aug 24
  2011-08-24  6:04 linux-next: Tree for Aug 24 Stephen Rothwell
  2011-08-24 17:25 ` linux-next: Tree for Aug 24 (dynamic_debug) Randy Dunlap
@ 2011-08-25  1:38 ` Arnaud Lacombe
  2011-08-25  4:30   ` Arnaud Lacombe
  1 sibling, 1 reply; 9+ messages in thread
From: Arnaud Lacombe @ 2011-08-25  1:38 UTC (permalink / raw)
  To: Stephen Rothwell; +Cc: linux-next, LKML

[-- Attachment #1: Type: text/plain, Size: 19154 bytes --]

Hi,

On Wed, Aug 24, 2011 at 2:04 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi all,
>
> The powerpc allyesconfig build still fails today.
>
> Changes since 20110823:
>
> New tree: kvmtool
>
> The security tree lost its build failure.
>
> The ptrace tree gained a build failure (yeaterday) for which I have
> reveretd a commit.
>
> The tty tree gained a build failure so I used the version from
> next-20110823.
>
> The staging tree gained a conflict against the fbdev tree and a build
> failure for which I reverted a commit.
>
> The moduleh tree gained a conflict against the staging tree.
>
Quickly testing a new configuration blows up on the following:

console [ttyS0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: No reference (HPET/PMTIMER) available
Marking TSC unstable due to could not calculate TSC khz
Calibrating delay loop... 154.88 BogoMIPS (lpj=77440)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Intel QEMU Virtual CPU version 0.13.0 stepping 03
BUG: unable to handle kernel paging request at 827bf688
IP: [<c13945e2>] apply_alternatives+0xc3/0x18a
*pde = 00000000
Oops: 0000 [#1] DEBUG_PAGEALLOC

Pid: 0, comm: swapper Not tainted 3.1.0-rc3-next-20110824+ #5 Bochs Bochs
EIP: 0060:[<c13945e2>] EFLAGS: 00000286 CPU: 0
EIP is at apply_alternatives+0xc3/0x18a
EAX: ffffffff EBX: c13df690 ECX: 00000005 EDX: 827bf688
ESI: 827bf688 EDI: c1367e9e EBP: c1367fa8 ESP: c1367e70
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c1366000 task=c136c340 task.ti=c1366000)
Stack:
 00000002 c137b700 c1142ac0 00000dc6 c1367e9e 8268a422 00000005 827bf688
 c13dffd8 c1367e05 05000086 f6890046 00f69000 c1367eb0 00000086 00000000
 00000046 c1367ec0 00000046 00000000 c1367edc c101f3cc 00000dd3 00000000
Call Trace:
 [<c1142ac0>] ? serial8250_start_tx+0xe0/0xe0
 [<c101f3cc>] ? console_unlock+0x10c/0x150
 [<c12ab669>] ? common_interrupt+0x29/0x30
 [<c1023c64>] ? irq_exit+0x54/0x90
 [<c1003a93>] ? do_IRQ+0x43/0xa0
 [<c12ab669>] ? common_interrupt+0x29/0x30
 [<c13954a8>] ? check_fpu+0xae/0xdc
 [<c13946c0>] alternative_instructions+0x17/0x32
 [<c1395567>] check_bugs+0x91/0x93
 [<c138f6bb>] start_kernel+0x28e/0x299
 [<c138f1b7>] ? loglevel+0x1a/0x1a
 [<c138f0b3>] i386_start_kernel+0xb3/0xbb
Code: ec fe ff ff 8d 0c 0b 89 8d dc fe ff ff 8d 54 13 04 8b bd d8 fe
ff ff 89 95 e4 fe ff ff 89 b5 e0 fe ff ff 8b 8d e0 fe ff ff 89 d6 <f3>
a4 80 bd f6 fe ff ff e8 75 17 80 bd ec fe ff ff 05 75 0e 89
EIP: [<c13945e2>] apply_alternatives+0xc3/0x18a SS:ESP 0068:c1367e70
CR2: 00000000827bf688
---[ end trace 4eaa2a86a8e2da22 ]---

.config attached. I'll try to bisect it.

 - Arnaud

> ----------------------------------------------------------------------------
>
> I have created today's linux-next tree at
> git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> (patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ).  If you
> are tracking the linux-next tree using git, you should not use "git pull"
> to do so as that will try to merge the new linux-next release with the
> old one.  You should use "git fetch" as mentioned in the FAQ on the wiki
> (see below).
>
> You can see which trees have been included by looking in the Next/Trees
> file in the source.  There are also quilt-import.log and merge.log files
> in the Next directory.  Between each merge, the tree was built with
> a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
> final fixups (if any), it is also built with powerpc allnoconfig (32 and
> 64 bit), ppc44x_defconfig and allyesconfig (minus
> CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc
> and sparc64 defconfig. These builds also have
> CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and
> CONFIG_DEBUG_INFO disabled when necessary.
>
> Below is a summary of the state of the merge.
>
> We are up to 199 trees (counting Linus' and 28 trees of patches pending
> for Linus' tree), more are welcome (even if they are currently empty).
> Thanks to those who have contributed, and to those who haven't, please do.
>
> Status of my local build tests will be at
> http://kisskb.ellerman.id.au/linux-next .  If maintainers want to give
> advice about cross compilers/configs that work, we are always open to add
> more builds.
>
> Thanks to Randy Dunlap for doing many randconfig builds.
>
> There is a wiki covering stuff to do with linux-next at
> http://linux.f-seidel.de/linux-next/pmwiki/ .  Thanks to Frank Seidel.
>
> --
> Cheers,
> Stephen Rothwell                    sfr@canb.auug.org.au
>
> $ git checkout master
> $ git reset --hard stable
> Merging origin/master
> Merging fixes/fixes
> Merging kbuild-current/rc-fixes
> Merging arm-current/master
> Merging m68k-current/for-linus
> Merging powerpc-merge/merge
> Merging 52xx-and-virtex-current/powerpc/merge
> Merging sparc-current/master
> Merging scsi-rc-fixes/master
> Merging net-current/master
> Merging sound-current/for-linus
> Merging pci-current/for-linus
> Merging wireless-current/master
> Merging driver-core.current/driver-core-linus
> Merging tty.current/tty-linus
> Merging usb.current/usb-linus
> Merging staging.current/staging-linus
> Merging cpufreq-current/fixes
> Merging input-current/for-linus
> Merging md-current/for-linus
> Merging audit-current/for-linus
> Merging crypto-current/master
> Merging ide-curent/master
> Merging dwmw2/master
> Merging sh-current/sh-fixes-for-linus
> Merging rmobile-current/rmobile-fixes-for-linus
> Merging fbdev-current/fbdev-fixes-for-linus
> Merging devicetree-current/devicetree/merge
> Merging spi-current/spi/merge
> Merging arm/for-next
> Merging arm-lpae/for-next
> CONFLICT (content): Merge conflict in arch/arm/include/asm/pgalloc.h
> CONFLICT (content): Merge conflict in arch/arm/include/asm/pgtable.h
> CONFLICT (content): Merge conflict in arch/arm/include/asm/tlb.h
> Merging arm-soc/for-next
> Merging at91/at91-next
> Merging davinci/davinci-next
> Merging i.MX/for-next
> Merging linux-spec/for-next
> Merging msm/for-next
> CONFLICT (content): Merge conflict in arch/arm/mach-msm/io.c
> Merging omap/for-next
> Merging pxa/for-next
> Merging samsung/next-samsung
> Merging s5p/for-next
> Merging tegra/for-next
> Merging ux500-core/ux500-core
> Merging xilinx/arm-next
> Merging blackfin/for-linus
> Merging cris/for-next
> Merging ia64/test
> Merging m68k/for-next
> Merging m68knommu/for-next
> Merging microblaze/next
> Merging mips/mips-for-linux-next
> Merging openrisc/for-upstream
> Merging parisc/for-next
> Merging powerpc/next
> Merging 4xx/next
> Merging 52xx-and-virtex/powerpc/next
> Merging galak/next
> Merging s390/features
> Merging sh/sh-latest
> Merging rmobile/rmobile-latest
> Merging sparc/master
> Merging tile/master
> Merging unicore32/unicore32
> Merging xtensa/master
> Merging ceph/for-next
> Merging cifs/master
> Merging configfs/linux-next
> Merging ecryptfs/next
> Merging ext3/for_next
> Merging ext4/dev
> Merging fatfs/master
> Merging fuse/for-next
> Merging gfs2/master
> Merging hfsplus/for-next
> Merging jfs/next
> Merging logfs/master
> Merging nfs/linux-next
> Merging nfsd/nfsd-next
> Merging nilfs2/for-next
> Merging ocfs2/linux-next
> Merging omfs/for-next
> Merging squashfs/master
> Merging udf/for_next
> Merging v9fs/for-next
> Merging ubifs/linux-next
> Merging xfs/master
> Merging vfs/for-next
> Merging vfs-scale/vfs-scale-working
> Merging pci/linux-next
> Merging hid/for-next
> Merging quilt/i2c
> Merging bjdooks-i2c/next-i2c
> Merging quilt/jdelvare-hwmon
> Merging hwmon-staging/hwmon-next
> Merging quilt/kernel-doc
> Merging docs/docs-move
> Merging v4l-dvb/master
> Merging kbuild/for-next
> Merging kconfig/for-next
> Merging ide/master
> Merging libata/NEXT
> Merging infiniband/for-next
> Merging acpi/test
> Merging idle-test/idle-test
> Merging powertools/tools-test
> Merging cpupowerutils/master
> Merging ieee1394/for-next
> Merging ubi/linux-next
> Merging dlm/next
> Merging swiotlb/master
> Merging ibft/master
> Merging scsi/master
> Merging iscsi-target/for-next
> Merging slave-dma/next
> Merging async_tx/next
> Merging net/master
> CONFLICT (delete/modify): arch/powerpc/configs/40x/hcu4_defconfig deleted in HEAD and modified in net/master. Version net/master of arch/powerpc/configs/40x/hcu4_defconfig left in tree.
> CONFLICT (content): Merge conflict in drivers/net/Kconfig
> CONFLICT (content): Merge conflict in drivers/net/Makefile
> $ git rm -f arch/powerpc/configs/40x/hcu4_defconfig
> Applying: powerpc: update ppc64_defconfig for net device movement
> Applying: sparc: update sparc32_defconfig for net device movement
> Applying: sparc: update sparc64_defconfig for net device movement
> Merging wireless/master
> Merging bluetooth/master
> Merging mtd/master
> Merging l2-mtd/master
> CONFLICT (content): Merge conflict in drivers/mtd/maps/lantiq-flash.c
> Merging crypto/master
> Merging sound/for-next
> Merging sound-asoc/for-next
> Merging cpufreq/next
> Merging quilt/rr
> Merging input/next
> Merging input-mt/next
> Merging lsm/for-next
> Merging block/for-next
> Merging quilt/device-mapper
> Merging embedded/master
> Merging firmware/master
> Merging pcmcia/master
> Merging battery/master
> Merging leds/for-mm
> CONFLICT (content): Merge conflict in drivers/leds/Kconfig
> Merging backlight/for-mm
> Merging mmc/mmc-next
> Merging kgdb/kgdb-next
> Merging slab/for-next
> Merging uclinux/for-next
> Merging md/for-next
> Merging mfd/for-next
> Merging hdlc/hdlc-next
> Merging drm/drm-next
> Merging fbdev/master
> Merging viafb/viafb-next
> Merging omap_dss2/for-next
> Merging voltage/for-next
> Merging security/next
> CONFLICT (content): Merge conflict in fs/ocfs2/xattr.c
> Merging selinux/master
> Merging lblnet/master
> Merging agp/agp-next
> Merging watchdog/master
> Merging bdev/master
> Merging dwmw2-iommu/master
> Merging cputime/cputime
> Merging osd/linux-next
> Merging jc_docs/docs-next
> Merging nommu/master
> Merging trivial/for-next
> Merging audit/for-next
> Merging pm/linux-next
> CONFLICT (content): Merge conflict in arch/s390/include/asm/thread_info.h
> CONFLICT (content): Merge conflict in drivers/mfd/twl4030-irq.c
> Merging apm/for-next
> Merging fsnotify/for-next
> Merging irda/for-next
> Merging i7core_edac/linux_next
> Merging i7300_edac/linux_next
> CONFLICT (content): Merge conflict in arch/x86/kernel/cpu/mcheck/mce.c
> Merging devicetree/devicetree/next
> CONFLICT (content): Merge conflict in drivers/of/base.c
> Merging spi/spi/next
> Merging gpio/gpio/next
> Merging tip/auto-latest
> CONFLICT (content): Merge conflict in arch/x86/mm/fault.c
> Merging rcu/rcu/next
> Merging kvm/linux-next
> Merging oprofile/for-next
> Merging ptrace/ptrace
> [master 12688b4] Revert "signal: Add block_sigmask() for adding sigmask to current->blocked"
> Merging xen/upstream/xen
> Merging xen-two/linux-next
> Merging xen-pvhvm/linux-next
> Merging edac-amd/for-next
> Merging percpu/for-next
> Merging workqueues/for-next
> Merging sfi/sfi-test
> Merging asm-generic/next
> Merging drivers-x86/linux-next
> Merging hwpoison/hwpoison
> Merging sysctl/master
> Merging namespace/master
> Merging regmap/for-next
> Merging driver-core/driver-core-next
> Merging tty/tty-next
> $ git reset --hard HEAD^
> Merging refs/next/20110823/tty
> Merging usb/usb-next
> Applying: usb: include module.h in the DesignWare USB3 DRD driver
> Merging staging/staging-next
> CONFLICT (content): Merge conflict in drivers/staging/xgifb/XGI_main_26.c
> Merging bkl-config/config
> Merging tmem/linux-next
> Merging writeback/next
> Merging arm-dt/devicetree/arm-next
> Merging moduleh/module.h-split
> CONFLICT (content): Merge conflict in drivers/staging/iio/accel/adis16220_core.c
> CONFLICT (content): Merge conflict in include/linux/dmaengine.h
> Applying: dm: use export.h instead of module.h where possible
> Applying: block: bsg-lib.c needs export.h not module.h
> Applying: PM: EXPORT_SYMBOL needs export.h
> Merging kvmtool/master
> CONFLICT (content): Merge conflict in include/net/9p/9p.h
> Merging scsi-post-merge/merge-base:master
> $ git checkout akpm
> Applying: Expand root=PARTUUID=UUID syntax to support selecting a root partition by
> Applying: This patch makes two changes:
> Applying: On thread exit shm_exit_ns() is called, it uses shm_ids(ns).rw_mutex.  It
> Applying: Because of x86-implement-strict-user-copy-checks-for-x86_64.patch
> Applying: When no floppy is found the module code can be released while a timer
> Applying: The parameter's origin type is long.  On an i386 architecture, it can
> Applying: Add support for Aspire 1410 BIOS v1.3314.  Fixes the following error:
> Applying: This makes the iris driver use the platform API, so it is properly exposed
> Applying: On x86_32 casting the unsigned int result of get_random_int() to long may
> Applying: This new driver replaces the old PCEngines Alix 2/3 LED driver with a new
> Applying: Cc: Ed Wildgoose <git@wildgooses.com>
> Applying: Replace the bubble sort in sanitize_e820_map() with a call to the generic
> Applying: The x86 timer interrupt handler is the only handler not traced in the
> Applying: The current interrupt traces from irq_handler_entry and irq_handler_exit
> Applying: Don't allow everybody to use a modem.
> Applying: The address limit is already set in flush_old_exec() so this
> Applying: A call to va_copy() should always be followed by a call to va_end() in the
> Applying: Don't dereference em if it's NULL or an error pointer.
> Applying: Some messing with error codes to return 0 on out id's and match
> Applying: fb_set_suspend() must be called with the console semaphore held, which
> Applying: hwmon was using an idr with a NULL pointer, so convert to an
> Applying: A straightforward looking use of idr for a device id.
> Applying: The address limit is already set in flush_old_exec() so this
> Applying: The address limit is already set in flush_old_exec() so this
> Applying: Add new check (assert_init) to make sure objects are initialized and
> Applying: del_timer_sync() calls debug_object_assert_init() to assert that a timer
> Applying: ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
> Applying: The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned,
> Applying: The address limit is already set in flush_old_exec() so those calls to
> Applying: When do pci remove/rescan on system that have more iommus, got
> Applying: The current implementation of dmi_name_in_vendors() is an invitation to
> Applying: For headers that get exported to userland and make use of u32 style
> Applying: Fix sparse warnings of right shift bigger than source value size:
> Applying: We leak in drivers/scsi/aacraid/commctrl.c::aac_send_raw_srb() :
> Applying: Some mangling of errors was necessary to maintain current interface.
> Applying: This does involve additional use of the spin lock in idr.c.  Is this an
> Applying: Instead of open coding this function use kstrtoul_from_user() directly.
> Applying: brd_make_request() always returns 0, which doesn't make much sense.
> Applying: The address limit is already set in flush_old_exec() so this assignment of
> Applying: The basic idea behind cross memory attach is to allow MPI programs doing
> Applying: - Add x86_64 specific wire up
> Applying: acct_isolated of compaction uses page_lru_base_type which returns only
> Applying: Change ISOLATE_XXX macro with bitwise isolate_mode_t type.  Normally,
> Applying: In async mode, compaction doesn't migrate dirty or writeback pages.  So,
> Applying: In __zone_reclaim case, we don't want to shrink mapped page.  Nonetheless,
> Applying: unmap_and_move() is one a big messy function.  Clean it up.
> Applying: radix_tree_tag_get()'s BUG (when it sees a tag after saw_unset_tag) was
> Applying: per-task block plug can reduce block queue lock contention and increase
> Applying: The tracing ring-buffer used this function briefly, but not anymore.
> Applying: After selecting a task to kill, the oom killer iterates all processes and
> Applying: Remove PageSwapBacked (!page_is_file_cache) cases from
> Applying: Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Applying: The current implementation of the /dev/hpet driver couples opening the
> Applying: smp_call_function() only lets all other CPUs execute a specific function,
> Applying: auto_demotion_disable is called only for online CPUs.  For hotplugged
> Applying: Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning:
> Applying: Strict user copy checks are only really supported on x86_32 even though
> Applying: The help text for this config is duplicated across the x86, parisc, and
> Applying: s/lib-/obj-/ for usercopy.o
> Applying: After an "unexpected" reboot, I found this Oops in my logs:
> Applying: In the move of the lis3 driver, the hp_accel.c file got dropped from the
> Applying: Add axis correction for HP EliteBook 2730p.
> Applying: Add axis correction for HP EliteBook 8540w.
> Applying: Add axis correction for HP ProBook 6555b.
> Applying: Adapt the help text for CONFIG_HP_ACCEL to the move of
> Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
> Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
> Applying: Change exported functions to use the device given as parameter
> Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
> Applying: Add V2 of the LED driver for a single timer channel for the TPU hardware
> Applying: Add support for slice by 8 to existing crc32 algorithm.  Also modify
> Applying: don't include asm/msr.h
> Applying: This is the one use of an ida that doesn't retry on receiving -EAGAIN.
> Applying: One can get this information from minix/inode.c, but adding the
> Applying: Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> Applying: Force this on for -next/mm testing purposes.
> Applying: Add a proc_dointvec_bool() sysctl handler for cases where the input value
> Applying: Use the new proc_do_intvec_bool() handler for various boolean inputs.
> Applying: Add a proc_dointvec_unsigned() sysctl handler for positive value cases.
> Applying: Cc: Alexey Dobriyan <adobriyan@gmail.com>
> Applying: Use the new proc_do_intvec_unsigned() handler for various unsigned inputs.
> Applying: A default echo function has been provided so it is no longer an error when
> Applying: This client driver allows you to use a GPIO pin as a source for PPS
> Applying: remove unneeded cast of void*
> Applying: Straightforward.  As an aside, the ida_init calls are not needed as far as
> Merging akpm
> Applying: do_mounts: remove __init_data from root_wait
> [master 9cba48a] Revert "Staging: add driver for Realtek RTS5139 cardreader"
>

[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 33575 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.1.0-rc3 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_F00F_BUG=y
CONFIG_X86_INVD_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=1
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not set
# CONFIG_ACPI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=2048
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_WINBOND_VLB is not set

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
# CONFIG_PHYLIB is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_APPLE is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_APRICOT=y
CONFIG_EEXPRESS=y
CONFIG_EEXPRESS_PRO=y
CONFIG_LP486E=y
CONFIG_NI52=y
CONFIG_ZNET=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set

#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: linux-next: Tree for Aug 24
  2011-08-25  1:38 ` linux-next: Tree for Aug 24 Arnaud Lacombe
@ 2011-08-25  4:30   ` Arnaud Lacombe
  0 siblings, 0 replies; 9+ messages in thread
From: Arnaud Lacombe @ 2011-08-25  4:30 UTC (permalink / raw)
  To: Stephen Rothwell; +Cc: linux-next, LKML

Hi,

On Wed, Aug 24, 2011 at 9:38 PM, Arnaud Lacombe <lacombar@gmail.com> wrote:
> Hi,
>
> On Wed, Aug 24, 2011 at 2:04 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>> Hi all,
>>
>> The powerpc allyesconfig build still fails today.
>>
>> Changes since 20110823:
>>
>> New tree: kvmtool
>>
>> The security tree lost its build failure.
>>
>> The ptrace tree gained a build failure (yeaterday) for which I have
>> reveretd a commit.
>>
>> The tty tree gained a build failure so I used the version from
>> next-20110823.
>>
>> The staging tree gained a conflict against the fbdev tree and a build
>> failure for which I reverted a commit.
>>
>> The moduleh tree gained a conflict against the staging tree.
>>
> Quickly testing a new configuration blows up on the following:
>
> console [ttyS0] enabled
> Fast TSC calibration failed
> TSC: Unable to calibrate against PIT
> TSC: No reference (HPET/PMTIMER) available
> Marking TSC unstable due to could not calculate TSC khz
> Calibrating delay loop... 154.88 BogoMIPS (lpj=77440)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> CPU: Intel QEMU Virtual CPU version 0.13.0 stepping 03
> BUG: unable to handle kernel paging request at 827bf688
> IP: [<c13945e2>] apply_alternatives+0xc3/0x18a
> *pde = 00000000
> Oops: 0000 [#1] DEBUG_PAGEALLOC
>
> Pid: 0, comm: swapper Not tainted 3.1.0-rc3-next-20110824+ #5 Bochs Bochs
> EIP: 0060:[<c13945e2>] EFLAGS: 00000286 CPU: 0
> EIP is at apply_alternatives+0xc3/0x18a
> EAX: ffffffff EBX: c13df690 ECX: 00000005 EDX: 827bf688
> ESI: 827bf688 EDI: c1367e9e EBP: c1367fa8 ESP: c1367e70
>  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
> Process swapper (pid: 0, ti=c1366000 task=c136c340 task.ti=c1366000)
> Stack:
>  00000002 c137b700 c1142ac0 00000dc6 c1367e9e 8268a422 00000005 827bf688
>  c13dffd8 c1367e05 05000086 f6890046 00f69000 c1367eb0 00000086 00000000
>  00000046 c1367ec0 00000046 00000000 c1367edc c101f3cc 00000dd3 00000000
> Call Trace:
>  [<c1142ac0>] ? serial8250_start_tx+0xe0/0xe0
>  [<c101f3cc>] ? console_unlock+0x10c/0x150
>  [<c12ab669>] ? common_interrupt+0x29/0x30
>  [<c1023c64>] ? irq_exit+0x54/0x90
>  [<c1003a93>] ? do_IRQ+0x43/0xa0
>  [<c12ab669>] ? common_interrupt+0x29/0x30
>  [<c13954a8>] ? check_fpu+0xae/0xdc
>  [<c13946c0>] alternative_instructions+0x17/0x32
>  [<c1395567>] check_bugs+0x91/0x93
>  [<c138f6bb>] start_kernel+0x28e/0x299
>  [<c138f1b7>] ? loglevel+0x1a/0x1a
>  [<c138f0b3>] i386_start_kernel+0xb3/0xbb
> Code: ec fe ff ff 8d 0c 0b 89 8d dc fe ff ff 8d 54 13 04 8b bd d8 fe
> ff ff 89 95 e4 fe ff ff 89 b5 e0 fe ff ff 8b 8d e0 fe ff ff 89 d6 <f3>
> a4 80 bd f6 fe ff ff e8 75 17 80 bd ec fe ff ff 05 75 0e 89
> EIP: [<c13945e2>] apply_alternatives+0xc3/0x18a SS:ESP 0068:c1367e70
> CR2: 00000000827bf688
> ---[ end trace 4eaa2a86a8e2da22 ]---
>
> .config attached. I'll try to bisect it.
>
ok, this is a regression in 3.1, continuing bisection...

 - Arnaud

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: linux-next: Tree for Aug 24 (dynamic_debug)
  2011-08-24 21:09       ` Greg KH
@ 2011-09-26 23:17         ` David Brown
  2011-09-27 13:27           ` Jason Baron
  0 siblings, 1 reply; 9+ messages in thread
From: David Brown @ 2011-09-26 23:17 UTC (permalink / raw)
  To: Jason Baron
  Cc: Randy Dunlap, Greg KH, Stephen Rothwell, Bart Van Assche,
	linux-next, LKML

On Wed, Aug 24, 2011 at 02:09:02PM -0700, Greg KH wrote:
> On Wed, Aug 24, 2011 at 12:42:48PM -0700, Randy Dunlap wrote:
> > On Wed, 24 Aug 2011 15:32:45 -0400 Jason Baron wrote:
> > 
> > > On Wed, Aug 24, 2011 at 10:25:51AM -0700, Randy Dunlap wrote:
> > > > On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
> > > > 
> > > > > Hi all,
> > > > 
> > > > When CONFIG_NET is not enabled (I see this on i386 builds):
> > > > 
> > > > lib/built-in.o: In function `__dynamic_netdev_dbg':
> > > > (.text+0x9fda): undefined reference to `__netdev_printk'
> > > > 
> > > > ---
> > > > ~Randy
> > > > *** Remember to use Documentation/SubmitChecklist when testing your code ***
> > > 
> > > Ok, we probably want something, like below, although something keeps
> > > selecting CONFIG_NET, when I try to unset it, in my .config...so not yet
> > > tested, but should work.
> > 
> > Yes, that works.  Thanks.
> > 
> > Acked-by: Randy Dunlap <rdunlap@xenotime.net>
> 
> Nice.
> 
> Jason, care to resend this, with a proper signed-off-by, so that I can
> apply it to fix this build error?

Any status on this, Jason?  This seems to still be broken in
linux-next.

Thanks,
David

-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: linux-next: Tree for Aug 24 (dynamic_debug)
  2011-09-26 23:17         ` David Brown
@ 2011-09-27 13:27           ` Jason Baron
  0 siblings, 0 replies; 9+ messages in thread
From: Jason Baron @ 2011-09-27 13:27 UTC (permalink / raw)
  To: David Brown, akpm
  Cc: Randy Dunlap, Greg KH, Stephen Rothwell, Bart Van Assche,
	linux-next, LKML

On Mon, Sep 26, 2011 at 04:17:02PM -0700, David Brown wrote:
> On Wed, Aug 24, 2011 at 02:09:02PM -0700, Greg KH wrote:
> > On Wed, Aug 24, 2011 at 12:42:48PM -0700, Randy Dunlap wrote:
> > > On Wed, 24 Aug 2011 15:32:45 -0400 Jason Baron wrote:
> > > 
> > > > On Wed, Aug 24, 2011 at 10:25:51AM -0700, Randy Dunlap wrote:
> > > > > On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
> > > > > 
> > > > > > Hi all,
> > > > > 
> > > > > When CONFIG_NET is not enabled (I see this on i386 builds):
> > > > > 
> > > > > lib/built-in.o: In function `__dynamic_netdev_dbg':
> > > > > (.text+0x9fda): undefined reference to `__netdev_printk'
> > > > > 
> > > > > ---
> > > > > ~Randy
> > > > > *** Remember to use Documentation/SubmitChecklist when testing your code ***
> > > > 
> > > > Ok, we probably want something, like below, although something keeps
> > > > selecting CONFIG_NET, when I try to unset it, in my .config...so not yet
> > > > tested, but should work.
> > > 
> > > Yes, that works.  Thanks.
> > > 
> > > Acked-by: Randy Dunlap <rdunlap@xenotime.net>
> > 
> > Nice.
> > 
> > Jason, care to resend this, with a proper signed-off-by, so that I can
> > apply it to fix this build error?
> 
> Any status on this, Jason?  This seems to still be broken in
> linux-next.
> 
> Thanks,
> David
> 

Yes, this needs to be resolved asap. I'm sending this to Andrew Morton 
b/c these patches have been merged in the -mm tree. I'm guessing
that b/c of the kernel.org outage they aren't showing up in -next? Since
this has dragged on and on, perhaps, those patches can be moved
somewhere else so they can be pulled into -next. Andrew?

Thanks,

-Jason

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2011-09-27 13:27 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-24  6:04 linux-next: Tree for Aug 24 Stephen Rothwell
2011-08-24 17:25 ` linux-next: Tree for Aug 24 (dynamic_debug) Randy Dunlap
2011-08-24 19:32   ` Jason Baron
2011-08-24 19:42     ` Randy Dunlap
2011-08-24 21:09       ` Greg KH
2011-09-26 23:17         ` David Brown
2011-09-27 13:27           ` Jason Baron
2011-08-25  1:38 ` linux-next: Tree for Aug 24 Arnaud Lacombe
2011-08-25  4:30   ` Arnaud Lacombe

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).