* [RFC] Congatec CGEB base, i2c and watchdog driver support
@ 2012-01-16 15:32 Sascha Hauer
2012-01-16 15:32 ` [PATCH 1/3] mfd: Add basic support for the Congatec CGEB BIOS interface Sascha Hauer
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: Sascha Hauer @ 2012-01-16 15:32 UTC (permalink / raw)
To: linux-kernel; +Cc: Samuel Ortiz, Jean Delvare, Wim Van Sebroeck
The following series adds support for the Congatec CGEB interface
found on some Congatec x86 boards. The CGEB interface is a BIOS
interface which provides access to onboard peripherals like I2C
busses and watchdogs. It works by mapping BIOS code and searching
for magic values which specify the entry points to the CGEB call.
The CGEB call is an API provided by the BIOS which provides access
to the functions in an ioctl like fashion.
For more information about the CGEB API have a look at:
http://www.congatec.com/single_news+M5d58c9cd155.html
This document only describes the C API, unfortunately not the
underlying BIOS interface.
Comments very appreciated.
Sascha
Sascha Hauer (3):
mfd: Add basic support for the Congatec CGEB BIOS interface
i2c: Add Congatec CGEB I2C driver
watchdog: Add Congatec CGEB watchdog driver
drivers/i2c/busses/Kconfig | 7 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-congatec-cgeb.c | 206 ++++++++++
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 1 +
drivers/mfd/congatec-cgeb.c | 590 +++++++++++++++++++++++++++++
drivers/watchdog/Kconfig | 9 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/congatec_cgeb_watchdog.c | 181 +++++++++
include/linux/mfd/congatec-cgeb.h | 105 +++++
10 files changed, 1111 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
create mode 100644 drivers/mfd/congatec-cgeb.c
create mode 100644 drivers/watchdog/congatec_cgeb_watchdog.c
create mode 100644 include/linux/mfd/congatec-cgeb.h
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/3] mfd: Add basic support for the Congatec CGEB BIOS interface
2012-01-16 15:32 [RFC] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
@ 2012-01-16 15:32 ` Sascha Hauer
2012-01-16 15:32 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
2012-01-16 15:32 ` [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver Sascha Hauer
2 siblings, 0 replies; 14+ messages in thread
From: Sascha Hauer @ 2012-01-16 15:32 UTC (permalink / raw)
To: linux-kernel; +Cc: Samuel Ortiz, Jean Delvare, Wim Van Sebroeck, Sascha Hauer
The Congatec CGEB is a BIOS interface found on some Congatec x86
modules. It provides access to on board peripherals like I2C busses
and watchdogs. This driver contains the basic support for accessing
the CGEB interface and registers the child devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 1 +
drivers/mfd/congatec-cgeb.c | 590 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/congatec-cgeb.h | 105 +++++++
4 files changed, 706 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/congatec-cgeb.c
create mode 100644 include/linux/mfd/congatec-cgeb.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f1391c2..873d04f 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -772,6 +772,16 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_CONGATEC_CGEB
+ tristate "Support for the Congatec CGEB BIOS interface"
+ depends on X86_32
+ help
+ The Congatec CGEB BIOS interface provides access to onboard
+ peripherals like I2C busses and watchdogs. additional drivers must be
+ enabled in order to use the functionality of the device.
+ Say y or m here if you are using a congatec module with CGEB interface,
+ otherwise say n.
+
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b2292eb..cee77f7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -104,3 +104,4 @@ obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
+obj-$(CONFIG_MFD_CONGATEC_CGEB) += congatec-cgeb.o
diff --git a/drivers/mfd/congatec-cgeb.c b/drivers/mfd/congatec-cgeb.c
new file mode 100644
index 0000000..445a9c5
--- /dev/null
+++ b/drivers/mfd/congatec-cgeb.c
@@ -0,0 +1,590 @@
+/*
+ * CGEB driver
+ *
+ * (c) 2011 Sascha Hauer, Pengutronix
+ *
+ * Based on code from Congatec AG.
+ *
+ * CGEB is a BIOS interface found on congatech modules. It consists of
+ * code found in the BIOS memory map which is called in a ioctl like
+ * fashion. This file contains the basic driver for this interface
+ * which provides access to the GCEB interface and registers the child
+ * devices like I2C busses and watchdogs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/congatec-cgeb.h>
+
+#include <generated/autoconf.h>
+#include <stddef.h>
+
+#define CGOS_BOARD_MAX_SIZE_ID_STRING 16
+
+#define CGEB_VERSION_MAJOR 1
+
+#define CGEB_GET_VERSION_MAJOR(v) (((unsigned long)(v))>>24)
+
+/* CGEB Low Descriptor located in 0xc0000-0xfffff */
+#define CGEB_LD_MAGIC "$CGEBLD$"
+
+struct cgeb_low_desc {
+ char magic[8]; /* descriptor magic string */
+ u16 size; /* size of this descriptor */
+ u16 reserved;
+ char bios_name[8]; /* BIOS name and revision "ppppRvvv" */
+ u32 hi_desc_phys_addr; /* phys addr of the high descriptor, can be 0 */
+};
+
+/* CGEB High Descriptor located in 0xfff00000-0xffffffff */
+#define CGEB_HD_MAGIC "$CGEBHD$"
+
+struct cgeb_high_desc {
+ char magic[8]; /* descriptor magic string */
+ u16 size; /* size of this descriptor */
+ u16 reserved;
+ u32 data_size; /* CGEB data area size */
+ u32 code_size; /* CGEB code area size */
+ u32 entry_rel; /* CGEB entry point relative to start */
+};
+
+struct cgeb_far_ptr {
+ u32 off;
+ u16 seg;
+ u16 pad;
+};
+
+struct cgeb_fps {
+ u32 size; /* size of the parameter structure */
+ u32 fct; /* function number */
+ struct cgeb_far_ptr data; /* CGEB data area */
+ u32 cont; /* private continuation pointer */
+ u32 subfps; /* private sub function parameter
+ * structure pointer
+ */
+ u32 subfct; /* sub function pointer */
+ u32 status; /* result codes of the function */
+ u32 unit; /* unit number or type */
+ u32 pars[4]; /* input parameters */
+ u32 rets[2]; /* return parameters */
+ void *iptr; /* input pointer */
+ void *optr; /* output pointer */
+};
+
+/* continuation status codes */
+#define CGEB_SUCCESS 0
+#define CGEB_NEXT 1
+#define CGEB_DELAY 2
+#define CGEB_NOIRQS 3
+
+#define CGEB_DBG_STR 0x100
+#define CGEB_DBG_HEX 0x101
+#define CGEB_DBG_DEC 0x102
+
+struct cgeb_map_mem {
+ unsigned long phys; /* physical address */
+ unsigned long size; /* size in bytes */
+ struct cgeb_far_ptr virt;
+};
+
+struct cgeb_map_mem_list {
+ unsigned long count; /* number of memory map entries */
+ struct cgeb_map_mem entries[];
+};
+
+struct cgeb_boardinfo {
+ unsigned long size;
+ unsigned long flags;
+ unsigned long classes;
+ unsigned long primary_class;
+ char board[CGOS_BOARD_MAX_SIZE_ID_STRING];
+ /* optional */
+ char vendor[CGOS_BOARD_MAX_SIZE_ID_STRING];
+};
+
+struct cgeb_i2c_info {
+ unsigned long size;
+ unsigned long type;
+ unsigned long frequency;
+ unsigned long maxFrequency;
+};
+
+/* I2C Types */
+#define CGEB_I2C_TYPE_UNKNOWN 0
+#define CGEB_I2C_TYPE_PRIMARY 1
+#define CGEB_I2C_TYPE_SMB 2
+#define CGEB_I2C_TYPE_DDC 3
+#define CGEB_I2C_TYPE_BC 4
+
+struct cgeb_board_data {
+ void *code;
+ void *data;
+ unsigned short ds;
+ struct cgeb_map_mem_list *map_mem;
+ struct platform_device **devices;
+ int num_devices;
+
+ /*
+ * entry points to a bimodal C style function that expects a far pointer
+ * to a fps. If cs is 0 then it does a near return, otherwise a far
+ * return. If we ever need a far return then we must not pass cs at all.
+ * parameters are removed by the caller.
+ */
+ void __attribute__((regparm(0)))(*entry)(unsigned short,
+ struct cgeb_fps *, unsigned short);
+};
+
+static unsigned short get_data_segment(void)
+{
+ unsigned short ret;
+
+ asm volatile("mov %%ds, %0\n"
+ : "=r"(ret)
+ :
+ : "memory"
+ );
+
+ return ret;
+}
+
+/*
+ * cgeb_invoke - invoke CGEB BIOS call.
+ *
+ * @board: board context data
+ * @p: CGEB parameters for this call
+ * @fct: CGEB function code
+ * @return: 0 on success or negative error code on failure.
+ *
+ * Call the CGEB BIOS code with the given parameters.
+ */
+unsigned int cgeb_call(struct cgeb_board_data *board,
+ struct cgeb_function_parameters *p, cgeb_function_t fct)
+{
+ struct cgeb_fps fps;
+ int i;
+
+ memset(&fps, 0, sizeof(fps));
+
+ fps.size = sizeof(fps);
+ fps.fct = fct;
+ fps.data.off = (unsigned long) board->data;
+ fps.data.seg = board->ds;
+ fps.data.pad = 0;
+ fps.status = 0;
+ fps.cont = fps.subfct = fps.subfps = 0;
+ fps.unit = p->unit;
+ for (i = 0; i < 4; i++)
+ fps.pars[i] = p->pars[i];
+ fps.iptr = p->iptr;
+ fps.optr = p->optr;
+
+ while (1) {
+ pr_debug("CGEB: CGEB: -> size %02x, fct %02x, data %04x:%08x, status %08x\n",
+ fps.size, fps.fct, fps.data.seg, fps.data.off,
+ fps.status);
+
+ board->entry(0, &fps, fps.data.seg);
+
+ switch (fps.status) {
+ case CGEB_SUCCESS:
+ goto out;
+ case CGEB_NEXT:
+ break; /* simply call again */
+ case CGEB_NOIRQS:
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(0);
+ break;
+ case CGEB_DELAY:
+ usleep_range(fps.rets[0], fps.rets[0] + 1000);
+ break;
+ case CGEB_DBG_STR:
+ if (fps.optr)
+ pr_debug("CGEB: %s\n", (char *)fps.optr);
+ break;
+ case CGEB_DBG_HEX:
+ pr_debug("CGEB: 0x%08x\n", fps.rets[0]);
+ break;
+ case CGEB_DBG_DEC:
+ pr_debug("CGEB: %d\n", fps.rets[0]);
+ break;
+
+ default:
+ /* unknown continuation code */
+ return -EINVAL;
+ }
+ }
+out:
+ for (i = 0; i < 2; i++)
+ p->rets[i] = fps.rets[i];
+ p->optr = fps.optr;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cgeb_call);
+
+/*
+ * cgeb_call_simple - convenience wrapper for cgeb_call
+ *
+ * @board: board context data
+ * @p: CGEB parameters for this call
+ * @fct: CGEB function code
+ * @return: 0 on success or negative error code on failure.
+ *
+ * Call the CGEB BIOS code with the given parameters.
+ */
+int cgeb_call_simple(struct cgeb_board_data *board,
+ cgeb_function_t fct, unsigned long unit,
+ unsigned long *optr, unsigned long *result)
+{
+ struct cgeb_function_parameters p;
+ unsigned int ret;
+
+ memset(&p, 0, sizeof(p));
+ p.unit = unit;
+ p.optr = optr;
+
+ ret = cgeb_call(board, &p, fct);
+ if (optr)
+ *optr = (unsigned long)p.optr;
+ if (result)
+ *result = p.rets[0];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cgeb_call_simple);
+
+static void *cgeb_find_magic(void *_mem, size_t len, char *magic)
+{
+ unsigned long magic0 = ((unsigned long *) magic)[0];
+ unsigned long magic1 = ((unsigned long *) magic)[1];
+ int i = 0;
+
+ while (i < len) {
+ u32 *mem = _mem + i;
+ if (mem[0] == magic0 && mem[1] == magic1)
+ return mem;
+ i += 16;
+ }
+
+ return NULL;
+}
+
+static void cgeb_unmap_memory(struct cgeb_board_data *board)
+{
+ struct cgeb_map_mem_list *pmm;
+ struct cgeb_map_mem *pmme;
+ unsigned long i;
+
+ if (!board->map_mem)
+ return;
+
+ pmm = board->map_mem;
+ pmme = pmm->entries;
+ for (i = 0; i < pmm->count; i++, pmme++) {
+ if (pmme->virt.off)
+ iounmap((void *)pmme->virt.off);
+ pmme->virt.off = 0;
+ pmme->virt.seg = 0;
+ }
+}
+
+static int cgeb_map_memory(struct cgeb_board_data *board)
+{
+ struct cgeb_map_mem_list *pmm;
+ struct cgeb_map_mem *pmme;
+ int i;
+ int ret;
+
+ ret = cgeb_call_simple(board, CgebMapGetMem, 0, (void *)&board->map_mem,
+ NULL);
+ if (ret)
+ return ret;
+ if (!board->map_mem)
+ return 0;
+
+ pmm = board->map_mem;
+ pmme = pmm->entries;
+
+ pr_debug("CGEB: Memory Map with %lu entries\n", pmm->count);
+
+ for (i = 0; i < pmm->count; i++, pmme++) {
+ if (pmme->phys && pmme->size) {
+ pmme->virt.off =
+ (unsigned long) ioremap_cache(pmme->phys,
+ pmme->size);
+ if (!pmme->virt.off)
+ return -ENOMEM;
+ } else {
+ pmme->virt.off = 0;
+ }
+
+ pmme->virt.seg = (pmme->virt.off) ? board->ds : 0;
+
+ pr_debug("CGEB: Map phys %08lx, size %08lx, virt %04x:%08x\n",
+ pmme->phys, pmme->size, pmme->virt.seg,
+ pmme->virt.off);
+ }
+
+ return cgeb_call_simple(board, CgebMapChanged, 0, NULL, NULL);
+}
+
+static struct cgeb_board_data *cgeb_open(unsigned long base, unsigned long len)
+{
+ unsigned long dw;
+ struct cgeb_boardinfo *pbi;
+ struct cgeb_low_desc *low_desc;
+ struct cgeb_high_desc *high_desc = NULL;
+ unsigned long high_desc_phys;
+ unsigned long high_desc_len;
+ void __iomem *pcur, *high_desc_virt;
+ int ret;
+
+ struct cgeb_board_data *board;
+
+ board = kzalloc(sizeof(*board), GFP_KERNEL);
+ if (!board)
+ return NULL;
+
+ pcur = ioremap_cache(base, len);
+ if (!pcur)
+ goto err_kfree;
+
+ /* look for the CGEB descriptor */
+ low_desc = cgeb_find_magic(pcur, len, CGEB_LD_MAGIC);
+ if (!low_desc)
+ goto err_kfree;
+
+ pr_debug("CGEB: Found CGEB_LD_MAGIC\n");
+
+ if (low_desc->size < sizeof(struct cgeb_low_desc) - sizeof(long))
+ goto err_kfree;
+
+ if (low_desc->size >= sizeof(struct cgeb_low_desc)
+ && low_desc->hi_desc_phys_addr)
+ high_desc_phys = low_desc->hi_desc_phys_addr;
+ else
+ high_desc_phys = 0xfff00000;
+
+ high_desc_len = (unsigned long) -(long) high_desc_phys;
+
+ pr_debug("CGEB: Looking for CGEB hi desc between phys 0x%lx and 0x%x\n",
+ high_desc_phys, -1);
+
+ high_desc_virt = ioremap_cache(high_desc_phys, high_desc_len);
+ if (!high_desc_virt)
+ goto err_kfree;
+
+ pr_debug("CGEB: Looking for CGEB hi desc between virt 0x%p and 0x%p\n",
+ high_desc_virt, high_desc_virt + high_desc_len - 1);
+
+ high_desc = cgeb_find_magic(high_desc_virt, high_desc_len,
+ CGEB_HD_MAGIC);
+ if (!high_desc)
+ goto err_iounmap;
+
+ pr_debug("CGEB: Found CGEB_HD_MAGIC\n");
+
+ if (high_desc->size < sizeof(struct cgeb_high_desc))
+ goto err_iounmap;
+
+ pr_debug("CGEB: data_size %u, code_size %u, entry_rel %u\n",
+ high_desc->data_size, high_desc->code_size, high_desc->entry_rel);
+
+ board->code = __vmalloc(high_desc->code_size, GFP_KERNEL,
+ PAGE_KERNEL_EXEC);
+ if (!board->code)
+ goto err_iounmap;
+
+ memcpy(board->code, high_desc, high_desc->code_size);
+
+ high_desc = board->code;
+
+ board->entry = board->code + high_desc->entry_rel;
+
+ board->ds = get_data_segment();
+
+ ret = cgeb_call_simple(board, CgebGetCgebVersion, 0, NULL, &dw);
+ if (ret)
+ goto err_vfree;
+
+ if (CGEB_GET_VERSION_MAJOR(dw) != CGEB_VERSION_MAJOR)
+ goto err_vfree;
+
+ pr_debug("CGEB: BIOS interface revision: %ld.%ld\n",
+ dw >> 16, dw & 0xffff);
+
+ if (high_desc->data_size) {
+ board->data = vmalloc(high_desc->data_size);
+ if (!board->data)
+ goto err_vfree;
+ } else {
+ ret = cgeb_call_simple(board, CgebGetDataSize, 0, NULL, &dw);
+ if (!ret && dw) {
+ board->data = vmalloc(dw);
+ if (!board->data)
+ goto err_vfree;
+ }
+ }
+
+ ret = cgeb_call_simple(board, CgebOpen, 0, NULL, NULL);
+ if (ret)
+ goto err_vfree_data;
+
+ ret = cgeb_map_memory(board);
+ if (ret)
+ goto err_free_map;
+
+ ret = cgeb_call_simple(board, CgebBoardGetInfo, 0, &dw, NULL);
+ if (ret)
+ goto err_free_map;
+
+ pbi = (struct cgeb_boardinfo *) dw;
+
+ pr_info("CGEB: Board name: %c%c%c%c\n",
+ pbi->board[0], pbi->board[1],
+ pbi->board[2], pbi->board[3]);
+
+ iounmap(high_desc_virt);
+
+ return board;
+
+err_free_map:
+ cgeb_unmap_memory(board);
+err_vfree_data:
+ vfree(board->data);
+err_vfree:
+ vfree(board->code);
+err_iounmap:
+ iounmap(high_desc_virt);
+err_kfree:
+ kfree(board);
+ return NULL;
+}
+
+static void cgeb_close(struct cgeb_board_data *board)
+{
+ cgeb_call_simple(board, CgebClose, 0, NULL, NULL);
+
+ cgeb_unmap_memory(board);
+
+ vfree(board->data);
+ vfree(board->code);
+}
+
+static unsigned long cgeb_i2c_get_type(struct cgeb_board_data *brd, int unit)
+{
+ struct cgeb_i2c_info *info;
+ int ret;
+
+ ret = cgeb_call_simple(brd, CgebI2CGetInfo, unit, (void *) &info, NULL);
+ if (ret)
+ return ret;
+ if (!info)
+ return -EINVAL;
+ return info->type;
+}
+
+static struct cgeb_board_data *cgeb_board;
+
+static int __init cgeb_init(void)
+{
+ struct cgeb_board_data *board;
+ unsigned long base;
+ int i, ret;
+ struct cgeb_pdata pdata;
+ unsigned long i2c_count, watchdog_count;
+ int num_devices = 0;
+
+ for (base = 0xf0000; base >= 0xc0000; base -= 0x10000) {
+ board = cgeb_open(base, 0x10000);
+ if (board)
+ break;
+ }
+
+ if (!board)
+ return -ENODEV;
+
+ cgeb_board = board;
+
+ pdata.board = board;
+
+ cgeb_call_simple(board, CgebI2CCount, 0, NULL, &i2c_count);
+ cgeb_call_simple(board, CgebWDogCount, 0, NULL, &watchdog_count);
+
+ board->num_devices = i2c_count + watchdog_count;
+ board->devices = kzalloc(sizeof(void *) * (board->num_devices),
+ GFP_KERNEL);
+ if (!board->devices) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ for (i = 0; i < i2c_count; i++) {
+ ret = cgeb_i2c_get_type(board, i);
+ if (ret != CGEB_I2C_TYPE_PRIMARY)
+ continue;
+
+ pdata.unit = i;
+
+ board->devices[num_devices] =
+ platform_device_register_data(NULL, "cgeb-i2c", i,
+ &pdata, sizeof(pdata));
+ num_devices++;
+ }
+
+ for (i = 0; i < watchdog_count; i++) {
+ board->devices[num_devices] =
+ platform_device_register_data(NULL, "cgeb-watchdog", i,
+ &pdata, sizeof(pdata));
+ pdata.unit = i;
+
+ num_devices++;
+ }
+
+ return 0;
+err_out:
+ cgeb_close(board);
+ kfree(board);
+
+ return ret;
+}
+
+static void cgeb_exit(void)
+{
+ struct cgeb_board_data *board = cgeb_board;
+ int i;
+
+ for (i = 0; i < board->num_devices; i++)
+ if (board->devices[i])
+ platform_device_unregister(board->devices[i]);
+
+ cgeb_close(board);
+
+ kfree(board->devices);
+ kfree(board);
+}
+
+module_init(cgeb_init);
+module_exit(cgeb_exit);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("CGEB driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/congatec-cgeb.h b/include/linux/mfd/congatec-cgeb.h
new file mode 100644
index 0000000..74069fc
--- /dev/null
+++ b/include/linux/mfd/congatec-cgeb.h
@@ -0,0 +1,105 @@
+#ifndef __CONGATEC_CGEB_H
+#define __CONGATEC_CGEB_H
+
+/* CGEB interface functions */
+typedef enum {
+ CgebGetCgebVersion = 0,
+ CgebGetSysBiosVersion = 1,
+ CgebGetVgaBiosVersion = 2,
+ CgebGetDataSize = 3,
+ CgebOpen = 4,
+ CgebClose = 5,
+ CgebMapGetMem = 6,
+ CgebMapChanged = 7,
+ CgebMapGetPorts = 8,
+ CgebDelayUs = 9,
+ CgebCgbcReadWrite = 10,
+ CgebCgbcSetControl = 11,
+ CgebCgbcGetInfo = 12,
+ CgebCgbcHandleCommand = 13,
+ CgebBoardGetInfo = 14,
+ CgebBoardGetBootCounter = 15,
+ CgebBoardGetRunningTimeMeter = 16,
+ CgebBoardGetBootErrorLog = 17,
+ CgebVgaCount = 18,
+ CgebVgaGetInfo = 19,
+ CgebVgaGetContrast = 20,
+ CgebVgaSetContrast = 21,
+ CgebVgaGetContrastEnable = 22,
+ CgebVgaSetContrastEnable = 23,
+ CgebVgaGetBacklight = 24,
+ CgebVgaSetBacklight = 25,
+ CgebVgaGetBacklightEnable = 26,
+ CgebVgaSetBacklightEnable = 27,
+ CgebVgaEndDarkBoot = 28,
+ CgebStorageAreaCount = 29,
+ CgebStorageAreaGetInfo = 30,
+ CgebStorageAreaRead = 31,
+ CgebStorageAreaWrite = 32,
+ CgebStorageAreaErase = 33,
+ CgebStorageAreaEraseStatus = 34,
+ CgebI2CCount = 35,
+ CgebI2CGetInfo = 36,
+ CgebI2CGetAddrList = 37,
+ CgebI2CTransfer = 38,
+ CgebI2CGetFrequency = 39,
+ CgebI2CSetFrequency = 40,
+ CgebIOCount = 41,
+ CgebIOGetInfo = 42,
+ CgebIORead = 43,
+ CgebIOWrite = 44,
+ CgebIOGetDirection = 45,
+ CgebIOSetDirection = 46,
+ CgebWDogCount = 47,
+ CgebWDogGetInfo = 48,
+ CgebWDogTrigger = 49,
+ CgebWDogGetConfig = 50,
+ CgebWDogSetConfig = 51,
+ CgebPerformanceGetCurrent = 52,
+ CgebPerformanceSetCurrent = 53,
+ CgebPerformanceGetPolicyCaps = 54,
+ CgebPerformanceGetPolicy = 55,
+ CgebPerformanceSetPolicy = 56,
+ CgebTemperatureCount = 57,
+ CgebTemperatureGetInfo = 58,
+ CgebTemperatureGetCurrent = 59,
+ CgebTemperatureSetLimits = 60,
+ CgebFanCount = 61,
+ CgebFanGetInfo = 62,
+ CgebFanGetCurrent = 63,
+ CgebFanSetLimits = 64,
+ CgebVoltageCount = 65,
+ CgebVoltageGetInfo = 66,
+ CgebVoltageGetCurrent = 67,
+ CgebVoltageSetLimits = 68,
+ CgebStorageAreaLock = 69,
+ CgebStorageAreaUnlock = 70,
+ CgebStorageAreaIsLocked = 71,
+} cgeb_function_t;
+
+struct cgeb_function_parameters {
+ u32 unit; /* unit number or type */
+ u32 pars[4]; /* input parameters */
+ u32 rets[2]; /* return parameters */
+ void *iptr; /* input pointer */
+ void *optr; /* output pointer */
+};
+
+struct cgeb_board_data;
+
+unsigned int cgeb_call(struct cgeb_board_data *,
+ struct cgeb_function_parameters *, cgeb_function_t);
+
+int cgeb_call_simple(struct cgeb_board_data *,
+ cgeb_function_t, unsigned long,
+ unsigned long *, unsigned long *);
+
+/*
+ * Platform data for child devices
+ */
+struct cgeb_pdata {
+ struct cgeb_board_data *board;
+ int unit;
+};
+
+#endif /* __CONGATEC_CGEB_H */
--
1.7.2.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2012-01-16 15:32 [RFC] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
2012-01-16 15:32 ` [PATCH 1/3] mfd: Add basic support for the Congatec CGEB BIOS interface Sascha Hauer
@ 2012-01-16 15:32 ` Sascha Hauer
2012-01-16 21:21 ` Jean Delvare
2012-01-16 15:32 ` [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver Sascha Hauer
2 siblings, 1 reply; 14+ messages in thread
From: Sascha Hauer @ 2012-01-16 15:32 UTC (permalink / raw)
To: linux-kernel; +Cc: Samuel Ortiz, Jean Delvare, Wim Van Sebroeck, Sascha Hauer
This driver provides a I2C bus driver for the CGEB interface
found on some Congatec x86 modules. No devices are registered
on the bus, the user has to do this via the i2c device /sys
interface.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/i2c/busses/Kconfig | 7 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-congatec-cgeb.c | 206 ++++++++++++++++++++++++++++++++
3 files changed, 214 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a3afac4..cc8eb22 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -696,6 +696,13 @@ config I2C_EG20T
ML7213/ML7223 is companion chip for Intel Atom E6xx series.
ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+config I2C_CONGATEC_CGEB
+ tristate "Congatec CGEB I2C driver"
+ depends on MFD_CONGATEC_CGEB
+ help
+ This driver provides support for the I2C busses accssable via
+ the Congatec CGEB interface found on Congatec boards.
+
comment "External I2C/SMBus adapter drivers"
config I2C_DIOLAN_U2C
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index fba6da6..4aab659 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
+obj-$(CONFIG_I2C_CONGATEC_CGEB) += i2c-congatec-cgeb.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
diff --git a/drivers/i2c/busses/i2c-congatec-cgeb.c b/drivers/i2c/busses/i2c-congatec-cgeb.c
new file mode 100644
index 0000000..a387662
--- /dev/null
+++ b/drivers/i2c/busses/i2c-congatec-cgeb.c
@@ -0,0 +1,206 @@
+/*
+ * CGEB i2c driver
+ *
+ * (c) 2011 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/congatec-cgeb.h>
+
+#define CG_I2C_FLAG_START 0x00080 /* send START condition */
+#define CG_I2C_FLAG_STOP 0x00040 /* send STOP condition */
+#define CG_I2C_FLAG_ALL_ACK 0x08000 /* send ACK on all read bytes */
+#define CG_I2C_FLAG_ALL_NAK 0x04000 /* send NAK on all read bytes */
+
+struct cgeb_i2c_priv {
+ struct cgeb_board_data *board;
+ struct i2c_adapter adapter;
+ int unit;
+};
+
+static u32 cgeb_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int cgeb_i2c_set_speed(struct cgeb_i2c_priv *priv, int speed)
+{
+ struct cgeb_function_parameters fps;
+
+ memset(&fps, 0, sizeof(fps));
+
+ fps.unit = priv->unit;
+ fps.pars[0] = speed;
+
+ return cgeb_call(priv->board, &fps, CgebI2CSetFrequency);
+}
+
+static int cgeb_i2c_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ struct cgeb_function_parameters fps;
+ int i, ret;
+ unsigned long flags = CG_I2C_FLAG_START;
+ struct cgeb_i2c_priv *priv = i2c_get_adapdata(adapter);
+ unsigned long rdlen, wrlen;
+ unsigned char *rdbuf, *wrbuf, *raw_wrbuf;
+ unsigned short lmax = 0;
+
+ /*
+ * With cgeb the I2C address is part of the write data
+ * buffer, so allocate a buffer with the length of the
+ * longest write buffer + 1
+ */
+ for (i = 0; i < num; i++)
+ if (!(msgs[i].flags & I2C_M_RD))
+ lmax = max(lmax, msgs[i].len);
+
+ raw_wrbuf = kmalloc(lmax + 1, GFP_KERNEL);
+ if (!raw_wrbuf)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++) {
+
+ if (msgs[i].flags & I2C_M_RD) {
+ rdbuf = msgs[i].buf;
+ rdlen = msgs[i].len;
+ wrbuf = NULL;
+ wrlen = 0;
+ } else {
+ rdbuf = NULL;
+ rdlen = 0;
+ wrbuf = msgs[i].buf;
+ wrlen = msgs[i].len;
+ }
+
+ raw_wrbuf[0] = msgs[i].addr << 1;
+ if (wrlen)
+ memcpy(&raw_wrbuf[1], wrbuf, wrlen);
+
+ if (msgs[i].flags & I2C_M_RD)
+ raw_wrbuf[0] |= 1;
+
+ if (i == num - 1)
+ flags |= CG_I2C_FLAG_STOP;
+
+ dev_dbg(&adapter->dev,
+ "%s: rd: %p/%ld wr: %p/%ld flags: 0x%08lx %s\n",
+ __func__, rdbuf, rdlen, raw_wrbuf, wrlen + 1,
+ flags,
+ msgs[i].flags & I2C_M_RD ? "READ" : "WRITE");
+
+ memset(&fps, 0, sizeof(fps));
+
+ fps.unit = priv->unit;
+ fps.pars[0] = wrlen + 1;
+ fps.pars[1] = rdlen;
+ fps.pars[2] = flags;
+ fps.iptr = raw_wrbuf;
+ fps.optr = rdbuf;
+
+ ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
+ if (ret) {
+ ret = -EREMOTEIO;
+ goto out;
+ }
+ }
+
+ ret = num;
+
+out:
+ kfree(raw_wrbuf);
+
+ return ret;
+
+}
+
+static struct i2c_algorithm cgeb_i2c_algo = {
+ .master_xfer = cgeb_i2c_xfer,
+ .functionality = cgeb_i2c_func,
+};
+
+static int __devinit cgeb_i2c_probe(struct platform_device *pdev)
+{
+ struct cgeb_i2c_priv *priv;
+ struct cgeb_pdata *pdata = pdev->dev.platform_data;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ strcpy(priv->adapter.name, pdev->name);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.algo = &cgeb_i2c_algo;
+ priv->adapter.dev.parent = &pdev->dev;
+ priv->unit = pdata->unit;
+ priv->board = pdata->board;
+ i2c_set_adapdata(&priv->adapter, priv);
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = cgeb_i2c_set_speed(priv, 400000);
+ if (ret)
+ /*
+ * not a critical error, we can continue with the default speed.
+ */
+ dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
+
+ ret = i2c_add_adapter(&priv->adapter);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "registration failed\n");
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "registered\n");
+
+ return 0;
+};
+
+static int __devexit cgeb_i2c_remove(struct platform_device *pdev)
+{
+ struct cgeb_i2c_priv *priv = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&priv->adapter);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver cgeb_i2c_driver = {
+ .probe = cgeb_i2c_probe,
+ .remove = __exit_p(cgeb_i2c_remove),
+ .driver = {
+ .name = "cgeb-i2c",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init cgeb_i2c_driver_init(void)
+{
+ return platform_driver_register(&cgeb_i2c_driver);
+}
+
+static void __exit cgeb_i2c_driver_exit(void)
+{
+ platform_driver_unregister(&cgeb_i2c_driver);
+}
+
+module_init(cgeb_i2c_driver_init);
+module_exit(cgeb_i2c_driver_exit);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("cgeb i2c driver");
+MODULE_LICENSE("GPL");
--
1.7.2.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
2012-01-16 15:32 [RFC] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
2012-01-16 15:32 ` [PATCH 1/3] mfd: Add basic support for the Congatec CGEB BIOS interface Sascha Hauer
2012-01-16 15:32 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
@ 2012-01-16 15:32 ` Sascha Hauer
2 siblings, 0 replies; 14+ messages in thread
From: Sascha Hauer @ 2012-01-16 15:32 UTC (permalink / raw)
To: linux-kernel; +Cc: Samuel Ortiz, Jean Delvare, Wim Van Sebroeck, Sascha Hauer
This driver provides support for the CGEB watchdog found on some
Congatec x86 modules.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/watchdog/Kconfig | 9 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/congatec_cgeb_watchdog.c | 181 +++++++++++++++++++++++++++++
3 files changed, 191 insertions(+), 0 deletions(-)
create mode 100644 drivers/watchdog/congatec_cgeb_watchdog.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 79fd606..a1f35a5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -880,6 +880,15 @@ config SBC_EPX_C3_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called sbc_epx_c3.
+config CONGATEC_CGEB_WATCHDOG
+ tristate "Congatec CGEB watchdog"
+ ---help---
+ This driver provides support for the watchdogs found on Congatec
+ modules with the CGEB BIOS interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called congatec_cgeb_wdt.
+
# M32R Architecture
# M68K Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index fe893e9..d0b2f1d 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -107,6 +107,7 @@ obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
obj-$(CONFIG_INTEL_SCU_WATCHDOG) += intel_scu_watchdog.o
+obj-$(CONFIG_CONGATEC_CGEB_WATCHDOG) += congatec_cgeb_watchdog.o
# M32R Architecture
diff --git a/drivers/watchdog/congatec_cgeb_watchdog.c b/drivers/watchdog/congatec_cgeb_watchdog.c
new file mode 100644
index 0000000..a4be745
--- /dev/null
+++ b/drivers/watchdog/congatec_cgeb_watchdog.c
@@ -0,0 +1,181 @@
+/*
+ * CGEB watchdog driver
+ *
+ * (c) 2011 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/mfd/congatec-cgeb.h>
+
+#define CGOS_WDOG_MODE_REBOOT_PC 0
+#define CGOS_WDOG_MODE_RESTART_OS 1
+#define CGOS_WDOG_MODE_STAGED 0x80
+
+#define CGOS_WDOG_OPMODE_DISABLED 0
+#define CGOS_WDOG_OPMODE_ONETIME_TRIG 1
+#define CGOS_WDOG_OPMODE_SINGLE_EVENT 2
+#define CGOS_WDOG_OPMODE_EVENT_REPEAT 3
+
+#define CGOS_WDOG_EVENT_INT 0 /* NMI/IRQ */
+#define CGOS_WDOG_EVENT_SCI 1 /* SMI/SCI */
+#define CGOS_WDOG_EVENT_RST 2 /* system reset */
+#define CGOS_WDOG_EVENT_BTN 3 /* power button */
+
+#define CGOS_WDOG_EVENT_MAX_STAGES 3
+
+struct cgeb_watchdog_stage {
+ unsigned long timeout;
+ unsigned long event;
+};
+
+struct cgeb_watchdog_config {
+ unsigned long size;
+ unsigned long timeout; /* not used in staged mode */
+ unsigned long delay;
+ unsigned long mode;
+ /* optional parameters for staged watchdog */
+ unsigned long op_mode;
+ unsigned long stage_count;
+ struct cgeb_watchdog_stage stages[CGOS_WDOG_EVENT_MAX_STAGES];
+};
+
+struct cgeb_watchdog_priv {
+ struct cgeb_board_data *board;
+ struct watchdog_device wdd;
+ unsigned int timeout_s;
+ int unit;
+};
+
+static struct watchdog_info cgeb_wdd_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .firmware_version = 0,
+ .identity = "cgeb watchdog",
+};
+
+static unsigned int watchdog_set_config(struct cgeb_watchdog_priv *priv,
+ unsigned int timeout_s)
+{
+ struct cgeb_board_data *board = priv->board;
+ struct cgeb_watchdog_config wdi;
+ struct cgeb_function_parameters fps;
+
+ memset(&wdi, 0, sizeof(wdi));
+ memset(&fps, 0, sizeof(fps));
+
+ fps.unit = priv->unit;
+ fps.iptr = &wdi;
+
+ wdi.timeout = timeout_s * 1000;
+ wdi.delay = 0;
+ wdi.size = sizeof(wdi);
+ wdi.mode = CGOS_WDOG_MODE_REBOOT_PC;
+
+ return cgeb_call(board, &fps, CgebWDogSetConfig);
+}
+
+static int cgeb_watchdog_start(struct watchdog_device *wdd)
+{
+ struct cgeb_watchdog_priv *priv = watchdog_get_drvdata(wdd);
+
+ return watchdog_set_config(priv, priv->timeout_s);
+}
+
+static int cgeb_watchdog_stop(struct watchdog_device *wdd)
+{
+ struct cgeb_watchdog_priv *priv = watchdog_get_drvdata(wdd);
+
+ return watchdog_set_config(priv, 0);
+}
+
+static int cgeb_watchdog_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout_s)
+{
+ struct cgeb_watchdog_priv *priv = watchdog_get_drvdata(wdd);
+
+ if (!timeout_s)
+ return -EINVAL;
+
+ priv->timeout_s = timeout_s;
+
+ return 0;
+}
+
+struct watchdog_ops cgeb_watchdog_ops = {
+ .start = cgeb_watchdog_start,
+ .stop = cgeb_watchdog_stop,
+ .set_timeout = cgeb_watchdog_set_timeout,
+};
+
+static int __devinit cgeb_watchdog_probe(struct platform_device *pdev)
+{
+ struct cgeb_watchdog_priv *priv;
+ struct cgeb_pdata *pdata = pdev->dev.platform_data;
+ int ret;
+
+ dev_info(&pdev->dev, "registering\n");
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->wdd.ops = &cgeb_watchdog_ops;
+ priv->wdd.info = &cgeb_wdd_info;
+ priv->wdd.min_timeout = 1;
+ priv->wdd.max_timeout = 3600;
+ priv->board = pdata->board;
+ priv->unit = pdata->unit;
+
+ watchdog_set_drvdata(&priv->wdd, priv);
+ platform_set_drvdata(pdev, priv);
+
+ ret = watchdog_register_device(&priv->wdd);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int __devexit cgeb_watchdog_remove(struct platform_device *pdev)
+{
+ struct cgeb_watchdog_priv *priv = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&priv->wdd);
+
+ return 0;
+}
+
+static struct platform_driver cgeb_watchdog_driver = {
+ .probe = cgeb_watchdog_probe,
+ .remove = __exit_p(cgeb_watchdog_remove),
+ .driver = {
+ .name = "cgeb-watchdog",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init cgeb_watchdog_driver_init(void)
+{
+ return platform_driver_register(&cgeb_watchdog_driver);
+}
+
+static void __exit cgeb_watchdog_driver_exit(void)
+{
+ platform_driver_unregister(&cgeb_watchdog_driver);
+}
+
+module_init(cgeb_watchdog_driver_init);
+module_exit(cgeb_watchdog_driver_exit);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("cgeb watchdog driver");
+MODULE_LICENSE("GPL");
--
1.7.2.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2012-01-16 15:32 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
@ 2012-01-16 21:21 ` Jean Delvare
2012-01-18 11:49 ` Sascha Hauer
0 siblings, 1 reply; 14+ messages in thread
From: Jean Delvare @ 2012-01-16 21:21 UTC (permalink / raw)
To: Sascha Hauer; +Cc: linux-kernel, Samuel Ortiz, Wim Van Sebroeck
Hi Sascha,
On Mon, 16 Jan 2012 16:32:19 +0100, Sascha Hauer wrote:
> This driver provides a I2C bus driver for the CGEB interface
> found on some Congatec x86 modules. No devices are registered
> on the bus, the user has to do this via the i2c device /sys
> interface.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/i2c/busses/Kconfig | 7 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-congatec-cgeb.c | 206 ++++++++++++++++++++++++++++++++
> 3 files changed, 214 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
> (...)
This should be sent to the linux-i2c list for review.
--
Jean Delvare
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2012-01-16 21:21 ` Jean Delvare
@ 2012-01-18 11:49 ` Sascha Hauer
0 siblings, 0 replies; 14+ messages in thread
From: Sascha Hauer @ 2012-01-18 11:49 UTC (permalink / raw)
To: Jean Delvare; +Cc: linux-kernel, Samuel Ortiz, Wim Van Sebroeck
On Mon, Jan 16, 2012 at 10:21:23PM +0100, Jean Delvare wrote:
> Hi Sascha,
>
> On Mon, 16 Jan 2012 16:32:19 +0100, Sascha Hauer wrote:
> > This driver provides a I2C bus driver for the CGEB interface
> > found on some Congatec x86 modules. No devices are registered
> > on the bus, the user has to do this via the i2c device /sys
> > interface.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> > drivers/i2c/busses/Kconfig | 7 +
> > drivers/i2c/busses/Makefile | 1 +
> > drivers/i2c/busses/i2c-congatec-cgeb.c | 206 ++++++++++++++++++++++++++++++++
> > 3 files changed, 214 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
> > (...)
>
> This should be sent to the linux-i2c list for review.
Yes, it was my intention to do this. Somehow I also forgot the watchdog
list. I Will send it there, I just hoped to get some comment to the base
driver first.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2013-02-14 10:11 ` Wolfram Sang
@ 2013-03-26 9:55 ` Christian Gmeiner
0 siblings, 0 replies; 14+ messages in thread
From: Christian Gmeiner @ 2013-03-26 9:55 UTC (permalink / raw)
To: Wolfram Sang
Cc: Sascha Hauer, LKML, x86, linux-i2c, linux-watchdog, Thomas Gleixner
2013/2/14 Wolfram Sang <wsa@the-dreams.de>:
> Hi Sascha,
>
>> diff --git a/drivers/i2c/busses/i2c-congatec-cgeb.c b/drivers/i2c/busses/i2c-congatec-cgeb.c
>> new file mode 100644
>> index 0000000..5f48ca4
>> --- /dev/null
>> +++ b/drivers/i2c/busses/i2c-congatec-cgeb.c
>> @@ -0,0 +1,194 @@
>> +/*
>> + * CGEB i2c driver
>> + *
>> + * (c) 2011 Sascha Hauer, Pengutronix
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; version 2 of the License.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/i2c.h>
>> +#include <asm/congatec-cgeb.h>
>
> Is asm a good place? Maybe linux/platform_data?
>
>> +
>> +#define CG_I2C_FLAG_START 0x00080 /* send START condition */
>> +#define CG_I2C_FLAG_STOP 0x00040 /* send STOP condition */
>> +#define CG_I2C_FLAG_ALL_ACK 0x08000 /* send ACK on all read bytes */
>> +#define CG_I2C_FLAG_ALL_NAK 0x04000 /* send NAK on all read bytes */
>> +
>> +struct cgeb_i2c_priv {
>> + struct cgeb_board_data *board;
>> + struct i2c_adapter adapter;
>> + int unit;
>> +};
>> +
>> +static u32 cgeb_i2c_func(struct i2c_adapter *adapter)
>> +{
>> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
>> +}
>
> To make sure: Have you checked if the driver can do SMBUS_QUICK by using
> 'i2cdetect'?
>
> ...
>
>> +static int cgeb_i2c_probe(struct platform_device *pdev)
>> +{
>> + struct cgeb_i2c_priv *priv;
>> + struct cgeb_pdata *pdata = pdev->dev.platform_data;
>> + int ret;
>> +
>> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + strcpy(priv->adapter.name, pdev->name);
>> + priv->adapter.owner = THIS_MODULE;
>> + priv->adapter.algo = &cgeb_i2c_algo;
>> + priv->adapter.dev.parent = &pdev->dev;
>> + priv->unit = pdata->unit;
>> + priv->board = pdata->board;
>> + i2c_set_adapdata(&priv->adapter, priv);
>> +
>> + platform_set_drvdata(pdev, priv);
>> +
>> + ret = cgeb_i2c_set_speed(priv, 400000);
>
> Not all slaves handle 400kHz. So, this might be a bit demanding. Then
> again, it is probably fix which slaves are connected and they work
> currently?
>
> ...
>
>> +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
>> +MODULE_DESCRIPTION("cgeb i2c driver");
>> +MODULE_LICENSE("GPL");
>
> GPLv2 is mentioned in the header.
>
> Other than that, the driver looks fine to me. If it should go via mfd,
> here is my
>
> Acked-by: Wolfram Sang <wsa@the-dreams.de>
>
> Otherwise, let me know if and when I should pick it up.
>
root@OT:/home/vis# i2cdetect -l
i2c-0 i2c cgeb-i2c I2C adapter
i2c-1 i2c Radeon i2c bit bus 0x90 I2C adapter
i2c-2 i2c Radeon i2c bit bus 0x91 I2C adapter
i2c-3 i2c Radeon i2c bit bus 0x92 I2C adapter
i2c-4 i2c Radeon i2c bit bus 0x93 I2C adapter
i2c-5 i2c Radeon i2c bit bus 0x94 I2C adapter
i2c-6 i2c Radeon i2c bit bus 0x95 I2C adapter
i2c-7 i2c Radeon i2c bit bus 0x96 I2C adapter
i2c-8 i2c Radeon i2c bit bus 0x97 I2C adapter
i2c-9 i2c Radeon aux bus DP-auxch I2C adapter
root@OT:/home/vis# i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- 21 -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
50: 50 51 -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
--
Christian Gmeiner, MSc
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2013-02-12 10:02 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
@ 2013-02-14 10:11 ` Wolfram Sang
2013-03-26 9:55 ` Christian Gmeiner
0 siblings, 1 reply; 14+ messages in thread
From: Wolfram Sang @ 2013-02-14 10:11 UTC (permalink / raw)
To: Sascha Hauer
Cc: linux-kernel, x86, linux-i2c, linux-watchdog, Thomas Gleixner
Hi Sascha,
> diff --git a/drivers/i2c/busses/i2c-congatec-cgeb.c b/drivers/i2c/busses/i2c-congatec-cgeb.c
> new file mode 100644
> index 0000000..5f48ca4
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-congatec-cgeb.c
> @@ -0,0 +1,194 @@
> +/*
> + * CGEB i2c driver
> + *
> + * (c) 2011 Sascha Hauer, Pengutronix
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <asm/congatec-cgeb.h>
Is asm a good place? Maybe linux/platform_data?
> +
> +#define CG_I2C_FLAG_START 0x00080 /* send START condition */
> +#define CG_I2C_FLAG_STOP 0x00040 /* send STOP condition */
> +#define CG_I2C_FLAG_ALL_ACK 0x08000 /* send ACK on all read bytes */
> +#define CG_I2C_FLAG_ALL_NAK 0x04000 /* send NAK on all read bytes */
> +
> +struct cgeb_i2c_priv {
> + struct cgeb_board_data *board;
> + struct i2c_adapter adapter;
> + int unit;
> +};
> +
> +static u32 cgeb_i2c_func(struct i2c_adapter *adapter)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}
To make sure: Have you checked if the driver can do SMBUS_QUICK by using
'i2cdetect'?
...
> +static int cgeb_i2c_probe(struct platform_device *pdev)
> +{
> + struct cgeb_i2c_priv *priv;
> + struct cgeb_pdata *pdata = pdev->dev.platform_data;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + strcpy(priv->adapter.name, pdev->name);
> + priv->adapter.owner = THIS_MODULE;
> + priv->adapter.algo = &cgeb_i2c_algo;
> + priv->adapter.dev.parent = &pdev->dev;
> + priv->unit = pdata->unit;
> + priv->board = pdata->board;
> + i2c_set_adapdata(&priv->adapter, priv);
> +
> + platform_set_drvdata(pdev, priv);
> +
> + ret = cgeb_i2c_set_speed(priv, 400000);
Not all slaves handle 400kHz. So, this might be a bit demanding. Then
again, it is probably fix which slaves are connected and they work
currently?
...
> +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
> +MODULE_DESCRIPTION("cgeb i2c driver");
> +MODULE_LICENSE("GPL");
GPLv2 is mentioned in the header.
Other than that, the driver looks fine to me. If it should go via mfd,
here is my
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Otherwise, let me know if and when I should pick it up.
Thanks,
Wolfram
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2013-02-12 10:02 [PATCH] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
@ 2013-02-12 10:02 ` Sascha Hauer
2013-02-14 10:11 ` Wolfram Sang
0 siblings, 1 reply; 14+ messages in thread
From: Sascha Hauer @ 2013-02-12 10:02 UTC (permalink / raw)
To: linux-kernel
Cc: x86, linux-i2c, linux-watchdog, Thomas Gleixner, Sascha Hauer
This driver provides a I2C bus driver for the CGEB interface
found on some Congatec x86 modules. No devices are registered
on the bus, the user has to do this via the i2c device /sys
interface.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/i2c/busses/Kconfig | 7 ++
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-congatec-cgeb.c | 194 ++++++++++++++++++++++++++++++++
3 files changed, 202 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index bdca511..c54f678 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -740,6 +740,13 @@ config I2C_RCAR
This driver can also be built as a module. If so, the module
will be called i2c-rcar.
+config I2C_CONGATEC_CGEB
+ tristate "Congatec CGEB I2C driver"
+ depends on CONGATEC_CGEB
+ help
+ This driver provides support for the I2C busses accssable via
+ the Congatec CGEB interface found on Congatec boards.
+
comment "External I2C/SMBus adapter drivers"
config I2C_DIOLAN_U2C
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 6181f3f..76e48e9 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
+obj-$(CONFIG_I2C_CONGATEC_CGEB) += i2c-congatec-cgeb.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
diff --git a/drivers/i2c/busses/i2c-congatec-cgeb.c b/drivers/i2c/busses/i2c-congatec-cgeb.c
new file mode 100644
index 0000000..5f48ca4
--- /dev/null
+++ b/drivers/i2c/busses/i2c-congatec-cgeb.c
@@ -0,0 +1,194 @@
+/*
+ * CGEB i2c driver
+ *
+ * (c) 2011 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <asm/congatec-cgeb.h>
+
+#define CG_I2C_FLAG_START 0x00080 /* send START condition */
+#define CG_I2C_FLAG_STOP 0x00040 /* send STOP condition */
+#define CG_I2C_FLAG_ALL_ACK 0x08000 /* send ACK on all read bytes */
+#define CG_I2C_FLAG_ALL_NAK 0x04000 /* send NAK on all read bytes */
+
+struct cgeb_i2c_priv {
+ struct cgeb_board_data *board;
+ struct i2c_adapter adapter;
+ int unit;
+};
+
+static u32 cgeb_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int cgeb_i2c_set_speed(struct cgeb_i2c_priv *priv, int speed)
+{
+ struct cgeb_function_parameters fps;
+
+ memset(&fps, 0, sizeof(fps));
+
+ fps.unit = priv->unit;
+ fps.pars[0] = speed;
+
+ return cgeb_call(priv->board, &fps, CgebI2CSetFrequency);
+}
+
+static int cgeb_i2c_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ struct cgeb_function_parameters fps;
+ int i, ret;
+ unsigned long flags = CG_I2C_FLAG_START;
+ struct cgeb_i2c_priv *priv = i2c_get_adapdata(adapter);
+ unsigned long rdlen, wrlen;
+ unsigned char *rdbuf, *wrbuf, *raw_wrbuf;
+ unsigned short lmax = 0;
+
+ /*
+ * With cgeb the I2C address is part of the write data
+ * buffer, so allocate a buffer with the length of the
+ * longest write buffer + 1
+ */
+ for (i = 0; i < num; i++)
+ if (!(msgs[i].flags & I2C_M_RD))
+ lmax = max(lmax, msgs[i].len);
+
+ raw_wrbuf = kmalloc(lmax + 1, GFP_KERNEL);
+ if (!raw_wrbuf)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++) {
+
+ if (msgs[i].flags & I2C_M_RD) {
+ rdbuf = msgs[i].buf;
+ rdlen = msgs[i].len;
+ wrbuf = NULL;
+ wrlen = 0;
+ } else {
+ rdbuf = NULL;
+ rdlen = 0;
+ wrbuf = msgs[i].buf;
+ wrlen = msgs[i].len;
+ }
+
+ raw_wrbuf[0] = msgs[i].addr << 1;
+ if (wrlen)
+ memcpy(&raw_wrbuf[1], wrbuf, wrlen);
+
+ if (msgs[i].flags & I2C_M_RD)
+ raw_wrbuf[0] |= 1;
+
+ if (i == num - 1)
+ flags |= CG_I2C_FLAG_STOP;
+
+ dev_dbg(&adapter->dev,
+ "%s: rd: %p/%ld wr: %p/%ld flags: 0x%08lx %s\n",
+ __func__, rdbuf, rdlen, raw_wrbuf, wrlen + 1,
+ flags,
+ msgs[i].flags & I2C_M_RD ? "READ" : "WRITE");
+
+ memset(&fps, 0, sizeof(fps));
+
+ fps.unit = priv->unit;
+ fps.pars[0] = wrlen + 1;
+ fps.pars[1] = rdlen;
+ fps.pars[2] = flags;
+ fps.iptr = raw_wrbuf;
+ fps.optr = rdbuf;
+
+ ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
+ if (ret) {
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+
+ ret = num;
+
+out:
+ kfree(raw_wrbuf);
+
+ return ret;
+
+}
+
+static struct i2c_algorithm cgeb_i2c_algo = {
+ .master_xfer = cgeb_i2c_xfer,
+ .functionality = cgeb_i2c_func,
+};
+
+static int cgeb_i2c_probe(struct platform_device *pdev)
+{
+ struct cgeb_i2c_priv *priv;
+ struct cgeb_pdata *pdata = pdev->dev.platform_data;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ strcpy(priv->adapter.name, pdev->name);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.algo = &cgeb_i2c_algo;
+ priv->adapter.dev.parent = &pdev->dev;
+ priv->unit = pdata->unit;
+ priv->board = pdata->board;
+ i2c_set_adapdata(&priv->adapter, priv);
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = cgeb_i2c_set_speed(priv, 400000);
+ if (ret)
+ /*
+ * not a critical error, we can continue with the default speed.
+ */
+ dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
+
+ ret = i2c_add_adapter(&priv->adapter);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "registration failed\n");
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "registered\n");
+
+ return 0;
+};
+
+static int cgeb_i2c_remove(struct platform_device *pdev)
+{
+ struct cgeb_i2c_priv *priv = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&priv->adapter);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver cgeb_i2c_driver = {
+ .probe = cgeb_i2c_probe,
+ .remove = cgeb_i2c_remove,
+ .driver = {
+ .name = "cgeb-i2c",
+ .owner = THIS_MODULE,
+ },
+};
+module_platform_driver(cgeb_i2c_driver);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("cgeb i2c driver");
+MODULE_LICENSE("GPL");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2012-02-07 10:10 ` Wolfram Sang
@ 2012-02-15 13:54 ` Sascha Hauer
0 siblings, 0 replies; 14+ messages in thread
From: Sascha Hauer @ 2012-02-15 13:54 UTC (permalink / raw)
To: Wolfram Sang
Cc: linux-kernel, Samuel Ortiz, Jean Delvare, linux-i2c,
linux-watchdog, Ben Dooks, kernel
On Tue, Feb 07, 2012 at 11:10:16AM +0100, Wolfram Sang wrote:
> Hi Sascha,
>
> > +config I2C_CONGATEC_CGEB
> > + tristate "Congatec CGEB I2C driver"
> > + depends on MFD_CONGATEC_CGEB
> > + help
> > + This driver provides support for the I2C busses accssable via
> > + the Congatec CGEB interface found on Congatec boards.
> > +
>
> Please keep the sorting (eg20t is wrong and will be fixed).
>
> > + ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
> > + if (ret) {
> > + ret = -EREMOTEIO;
> > + goto out;
> > + }
>
> -EREMOTEIO is not present in Documentation/i2c/fault-codes. Please use
> one from that file.
-EIO?
>
> > + ret = cgeb_i2c_set_speed(priv, 400000);
> > + if (ret)
> > + /*
> > + * not a critical error, we can continue with the default speed.
> > + */
> > + dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
>
> Is it possible to make this configurable? Not all I2C devices support
> 400KHz, 100KHz is OK.
Yes, it is. The problem is more *how* it should be configurable.
Exposing it via sysfs is the only reasonable option I can think
of.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2012-02-01 13:26 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
2012-02-07 8:38 ` Christian Gmeiner
2012-02-07 10:10 ` Wolfram Sang
@ 2012-02-13 23:22 ` Ben Dooks
2 siblings, 0 replies; 14+ messages in thread
From: Ben Dooks @ 2012-02-13 23:22 UTC (permalink / raw)
To: Sascha Hauer
Cc: linux-kernel, Samuel Ortiz, Jean Delvare, linux-i2c,
linux-watchdog, Ben Dooks, kernel
On Wed, Feb 01, 2012 at 02:26:32PM +0100, Sascha Hauer wrote:
> This driver provides a I2C bus driver for the CGEB interface
> found on some Congatec x86 modules. No devices are registered
> on the bus, the user has to do this via the i2c device /sys
> interface.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/i2c/busses/Kconfig | 7 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-congatec-cgeb.c | 206 ++++++++++++++++++++++++++++++++
> 3 files changed, 214 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index a3afac4..cc8eb22 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -696,6 +696,13 @@ config I2C_EG20T
> ML7213/ML7223 is companion chip for Intel Atom E6xx series.
> ML7213/ML7223 is completely compatible for Intel EG20T PCH.
>
> +config I2C_CONGATEC_CGEB
> + tristate "Congatec CGEB I2C driver"
> + depends on MFD_CONGATEC_CGEB
> + help
> + This driver provides support for the I2C busses accssable via
> + the Congatec CGEB interface found on Congatec boards.
> +
> comment "External I2C/SMBus adapter drivers"
>
> config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index fba6da6..4aab659 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -69,6 +69,7 @@ obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
> obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
> obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
> obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
> +obj-$(CONFIG_I2C_CONGATEC_CGEB) += i2c-congatec-cgeb.o
>
> # External I2C/SMBus adapter drivers
> obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-congatec-cgeb.c b/drivers/i2c/busses/i2c-congatec-cgeb.c
> new file mode 100644
> index 0000000..a387662
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-congatec-cgeb.c
> @@ -0,0 +1,206 @@
> +/*
> + * CGEB i2c driver
> + *
> + * (c) 2011 Sascha Hauer, Pengutronix
I'm going to note that (c) is not a universally legal representation of
Copyright © symbol. You probably want to add Copyright to the front
of that.
> +static int cgeb_i2c_xfer(struct i2c_adapter *adapter,
> + struct i2c_msg *msgs, int num)
> +{
> + struct cgeb_function_parameters fps;
> + int i, ret;
> + unsigned long flags = CG_I2C_FLAG_START;
> + struct cgeb_i2c_priv *priv = i2c_get_adapdata(adapter);
> + unsigned long rdlen, wrlen;
> + unsigned char *rdbuf, *wrbuf, *raw_wrbuf;
> + unsigned short lmax = 0;
Small note, it would have looked better to organise the longer items towards the top.
> + /*
> + * With cgeb the I2C address is part of the write data
> + * buffer, so allocate a buffer with the length of the
> + * longest write buffer + 1
> + */
> + for (i = 0; i < num; i++)
> + if (!(msgs[i].flags & I2C_M_RD))
> + lmax = max(lmax, msgs[i].len);
> +
> + raw_wrbuf = kmalloc(lmax + 1, GFP_KERNEL);
> + if (!raw_wrbuf)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++) {
> +
> + if (msgs[i].flags & I2C_M_RD) {
> + rdbuf = msgs[i].buf;
> + rdlen = msgs[i].len;
> + wrbuf = NULL;
> + wrlen = 0;
> + } else {
> + rdbuf = NULL;
> + rdlen = 0;
> + wrbuf = msgs[i].buf;
> + wrlen = msgs[i].len;
> + }
> +
> + raw_wrbuf[0] = msgs[i].addr << 1;
> + if (wrlen)
> + memcpy(&raw_wrbuf[1], wrbuf, wrlen);
> +
> + if (msgs[i].flags & I2C_M_RD)
> + raw_wrbuf[0] |= 1;
Hmm, surely buts of that can go in the above if () statement?
> + if (i == num - 1)
> + flags |= CG_I2C_FLAG_STOP;
> +
> + dev_dbg(&adapter->dev,
> + "%s: rd: %p/%ld wr: %p/%ld flags: 0x%08lx %s\n",
> + __func__, rdbuf, rdlen, raw_wrbuf, wrlen + 1,
> + flags,
> + msgs[i].flags & I2C_M_RD ? "READ" : "WRITE");
> +
> + memset(&fps, 0, sizeof(fps));
> +
> + fps.unit = priv->unit;
> + fps.pars[0] = wrlen + 1;
> + fps.pars[1] = rdlen;
> + fps.pars[2] = flags;
> + fps.iptr = raw_wrbuf;
> + fps.optr = rdbuf;
> +
> + ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
> + if (ret) {
> + ret = -EREMOTEIO;
> + goto out;
> + }
> + }
> +
> + ret = num;
> +
> +out:
> + kfree(raw_wrbuf);
> +
> + return ret;
> +
> +}
> +static int __devinit cgeb_i2c_probe(struct platform_device *pdev)
> +{
> + struct cgeb_i2c_priv *priv;
> + struct cgeb_pdata *pdata = pdev->dev.platform_data;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
it might be nice to print an error, but not necessary.
> + strcpy(priv->adapter.name, pdev->name);
> + priv->adapter.owner = THIS_MODULE;
> + priv->adapter.algo = &cgeb_i2c_algo;
> + priv->adapter.dev.parent = &pdev->dev;
> + priv->unit = pdata->unit;
> + priv->board = pdata->board;
> + i2c_set_adapdata(&priv->adapter, priv);
> +
> + platform_set_drvdata(pdev, priv);
> +
> + ret = cgeb_i2c_set_speed(priv, 400000);
> + if (ret)
> + /*
> + * not a critical error, we can continue with the default speed.
> + */
> + dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
> +
> + ret = i2c_add_adapter(&priv->adapter);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "registration failed\n");
> + return ret;
> + }
> +
> + dev_info(&pdev->dev, "registered\n");
> +
> + return 0;
> +};
> +
> +static int __devexit cgeb_i2c_remove(struct platform_device *pdev)
> +{
> + struct cgeb_i2c_priv *priv = platform_get_drvdata(pdev);
> +
> + i2c_del_adapter(&priv->adapter);
> +
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static struct platform_driver cgeb_i2c_driver = {
> + .probe = cgeb_i2c_probe,
> + .remove = __exit_p(cgeb_i2c_remove),
__devexit_p here.
> + .driver = {
> + .name = "cgeb-i2c",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init cgeb_i2c_driver_init(void)
> +{
> + return platform_driver_register(&cgeb_i2c_driver);
> +}
> +
> +static void __exit cgeb_i2c_driver_exit(void)
> +{
> + platform_driver_unregister(&cgeb_i2c_driver);
> +}
> +
> +module_init(cgeb_i2c_driver_init);
> +module_exit(cgeb_i2c_driver_exit);
> +
> +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
> +MODULE_DESCRIPTION("cgeb i2c driver");
> +MODULE_LICENSE("GPL");
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2012-02-01 13:26 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
2012-02-07 8:38 ` Christian Gmeiner
@ 2012-02-07 10:10 ` Wolfram Sang
2012-02-15 13:54 ` Sascha Hauer
2012-02-13 23:22 ` Ben Dooks
2 siblings, 1 reply; 14+ messages in thread
From: Wolfram Sang @ 2012-02-07 10:10 UTC (permalink / raw)
To: Sascha Hauer
Cc: linux-kernel, Samuel Ortiz, Jean Delvare, linux-i2c,
linux-watchdog, Ben Dooks, kernel
[-- Attachment #1: Type: text/plain, Size: 1540 bytes --]
Hi Sascha,
> +config I2C_CONGATEC_CGEB
> + tristate "Congatec CGEB I2C driver"
> + depends on MFD_CONGATEC_CGEB
> + help
> + This driver provides support for the I2C busses accssable via
> + the Congatec CGEB interface found on Congatec boards.
> +
Please keep the sorting (eg20t is wrong and will be fixed).
> + ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
> + if (ret) {
> + ret = -EREMOTEIO;
> + goto out;
> + }
-EREMOTEIO is not present in Documentation/i2c/fault-codes. Please use
one from that file.
> + ret = cgeb_i2c_set_speed(priv, 400000);
> + if (ret)
> + /*
> + * not a critical error, we can continue with the default speed.
> + */
> + dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
Is it possible to make this configurable? Not all I2C devices support
400KHz, 100KHz is OK.
> +static struct platform_driver cgeb_i2c_driver = {
> + .probe = cgeb_i2c_probe,
> + .remove = __exit_p(cgeb_i2c_remove),
__devexit_p()
> +static int __init cgeb_i2c_driver_init(void)
> +{
> + return platform_driver_register(&cgeb_i2c_driver);
> +}
> +
> +static void __exit cgeb_i2c_driver_exit(void)
> +{
> + platform_driver_unregister(&cgeb_i2c_driver);
> +}
> +
> +module_init(cgeb_i2c_driver_init);
> +module_exit(cgeb_i2c_driver_exit);
module_platform_driver();
Regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2012-02-01 13:26 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
@ 2012-02-07 8:38 ` Christian Gmeiner
2012-02-07 10:10 ` Wolfram Sang
2012-02-13 23:22 ` Ben Dooks
2 siblings, 0 replies; 14+ messages in thread
From: Christian Gmeiner @ 2012-02-07 8:38 UTC (permalink / raw)
To: Sascha Hauer
Cc: linux-kernel, Samuel Ortiz, Jean Delvare, linux-i2c,
linux-watchdog, Ben Dooks, kernel
Christian Gmeiner, MSc
2012/2/1 Sascha Hauer <s.hauer@pengutronix.de>:
> This driver provides a I2C bus driver for the CGEB interface
> found on some Congatec x86 modules. No devices are registered
> on the bus, the user has to do this via the i2c device /sys
> interface.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/i2c/busses/Kconfig | 7 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-congatec-cgeb.c | 206 ++++++++++++++++++++++++++++++++
> 3 files changed, 214 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index a3afac4..cc8eb22 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -696,6 +696,13 @@ config I2C_EG20T
> ML7213/ML7223 is companion chip for Intel Atom E6xx series.
> ML7213/ML7223 is completely compatible for Intel EG20T PCH.
>
> +config I2C_CONGATEC_CGEB
> + tristate "Congatec CGEB I2C driver"
> + depends on MFD_CONGATEC_CGEB
> + help
> + This driver provides support for the I2C busses accssable via
> + the Congatec CGEB interface found on Congatec boards.
> +
> comment "External I2C/SMBus adapter drivers"
>
> config I2C_DIOLAN_U2C
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index fba6da6..4aab659 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -69,6 +69,7 @@ obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
> obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
> obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
> obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
> +obj-$(CONFIG_I2C_CONGATEC_CGEB) += i2c-congatec-cgeb.o
>
> # External I2C/SMBus adapter drivers
> obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
> diff --git a/drivers/i2c/busses/i2c-congatec-cgeb.c b/drivers/i2c/busses/i2c-congatec-cgeb.c
> new file mode 100644
> index 0000000..a387662
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-congatec-cgeb.c
> @@ -0,0 +1,206 @@
> +/*
> + * CGEB i2c driver
> + *
> + * (c) 2011 Sascha Hauer, Pengutronix
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/mfd/congatec-cgeb.h>
> +
> +#define CG_I2C_FLAG_START 0x00080 /* send START condition */
> +#define CG_I2C_FLAG_STOP 0x00040 /* send STOP condition */
> +#define CG_I2C_FLAG_ALL_ACK 0x08000 /* send ACK on all read bytes */
> +#define CG_I2C_FLAG_ALL_NAK 0x04000 /* send NAK on all read bytes */
> +
> +struct cgeb_i2c_priv {
> + struct cgeb_board_data *board;
> + struct i2c_adapter adapter;
> + int unit;
> +};
> +
> +static u32 cgeb_i2c_func(struct i2c_adapter *adapter)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}
> +
> +static int cgeb_i2c_set_speed(struct cgeb_i2c_priv *priv, int speed)
> +{
> + struct cgeb_function_parameters fps;
> +
> + memset(&fps, 0, sizeof(fps));
> +
> + fps.unit = priv->unit;
> + fps.pars[0] = speed;
> +
> + return cgeb_call(priv->board, &fps, CgebI2CSetFrequency);
> +}
> +
> +static int cgeb_i2c_xfer(struct i2c_adapter *adapter,
> + struct i2c_msg *msgs, int num)
> +{
> + struct cgeb_function_parameters fps;
> + int i, ret;
> + unsigned long flags = CG_I2C_FLAG_START;
> + struct cgeb_i2c_priv *priv = i2c_get_adapdata(adapter);
> + unsigned long rdlen, wrlen;
> + unsigned char *rdbuf, *wrbuf, *raw_wrbuf;
> + unsigned short lmax = 0;
> +
> + /*
> + * With cgeb the I2C address is part of the write data
> + * buffer, so allocate a buffer with the length of the
> + * longest write buffer + 1
> + */
> + for (i = 0; i < num; i++)
> + if (!(msgs[i].flags & I2C_M_RD))
> + lmax = max(lmax, msgs[i].len);
> +
> + raw_wrbuf = kmalloc(lmax + 1, GFP_KERNEL);
> + if (!raw_wrbuf)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++) {
> +
> + if (msgs[i].flags & I2C_M_RD) {
> + rdbuf = msgs[i].buf;
> + rdlen = msgs[i].len;
> + wrbuf = NULL;
> + wrlen = 0;
> + } else {
> + rdbuf = NULL;
> + rdlen = 0;
> + wrbuf = msgs[i].buf;
> + wrlen = msgs[i].len;
> + }
> +
> + raw_wrbuf[0] = msgs[i].addr << 1;
> + if (wrlen)
> + memcpy(&raw_wrbuf[1], wrbuf, wrlen);
> +
> + if (msgs[i].flags & I2C_M_RD)
> + raw_wrbuf[0] |= 1;
> +
> + if (i == num - 1)
> + flags |= CG_I2C_FLAG_STOP;
> +
> + dev_dbg(&adapter->dev,
> + "%s: rd: %p/%ld wr: %p/%ld flags: 0x%08lx %s\n",
> + __func__, rdbuf, rdlen, raw_wrbuf, wrlen + 1,
> + flags,
> + msgs[i].flags & I2C_M_RD ? "READ" : "WRITE");
> +
> + memset(&fps, 0, sizeof(fps));
> +
> + fps.unit = priv->unit;
> + fps.pars[0] = wrlen + 1;
> + fps.pars[1] = rdlen;
> + fps.pars[2] = flags;
> + fps.iptr = raw_wrbuf;
> + fps.optr = rdbuf;
> +
> + ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
> + if (ret) {
> + ret = -EREMOTEIO;
> + goto out;
> + }
> + }
> +
> + ret = num;
> +
> +out:
> + kfree(raw_wrbuf);
> +
> + return ret;
> +
> +}
> +
> +static struct i2c_algorithm cgeb_i2c_algo = {
> + .master_xfer = cgeb_i2c_xfer,
> + .functionality = cgeb_i2c_func,
> +};
> +
> +static int __devinit cgeb_i2c_probe(struct platform_device *pdev)
> +{
> + struct cgeb_i2c_priv *priv;
> + struct cgeb_pdata *pdata = pdev->dev.platform_data;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + strcpy(priv->adapter.name, pdev->name);
> + priv->adapter.owner = THIS_MODULE;
> + priv->adapter.algo = &cgeb_i2c_algo;
> + priv->adapter.dev.parent = &pdev->dev;
> + priv->unit = pdata->unit;
> + priv->board = pdata->board;
> + i2c_set_adapdata(&priv->adapter, priv);
> +
> + platform_set_drvdata(pdev, priv);
> +
> + ret = cgeb_i2c_set_speed(priv, 400000);
> + if (ret)
> + /*
> + * not a critical error, we can continue with the default speed.
> + */
> + dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
> +
> + ret = i2c_add_adapter(&priv->adapter);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "registration failed\n");
> + return ret;
> + }
> +
> + dev_info(&pdev->dev, "registered\n");
> +
> + return 0;
> +};
> +
> +static int __devexit cgeb_i2c_remove(struct platform_device *pdev)
> +{
> + struct cgeb_i2c_priv *priv = platform_get_drvdata(pdev);
> +
> + i2c_del_adapter(&priv->adapter);
> +
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static struct platform_driver cgeb_i2c_driver = {
> + .probe = cgeb_i2c_probe,
> + .remove = __exit_p(cgeb_i2c_remove),
> + .driver = {
> + .name = "cgeb-i2c",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init cgeb_i2c_driver_init(void)
> +{
> + return platform_driver_register(&cgeb_i2c_driver);
> +}
> +
> +static void __exit cgeb_i2c_driver_exit(void)
> +{
> + platform_driver_unregister(&cgeb_i2c_driver);
> +}
> +
> +module_init(cgeb_i2c_driver_init);
> +module_exit(cgeb_i2c_driver_exit);
> +
> +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
> +MODULE_DESCRIPTION("cgeb i2c driver");
> +MODULE_LICENSE("GPL");
> --
> 1.7.2.5
>
Patch looks good and runs nicely with some i2c devices (eeprom, io
expander, temp sensors,...)
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: UU UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- 39 -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- --
50: UU UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
2012-02-01 13:26 [RESEND] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
@ 2012-02-01 13:26 ` Sascha Hauer
2012-02-07 8:38 ` Christian Gmeiner
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: Sascha Hauer @ 2012-02-01 13:26 UTC (permalink / raw)
To: linux-kernel
Cc: Samuel Ortiz, Jean Delvare, linux-i2c, linux-watchdog, Ben Dooks,
kernel, Sascha Hauer
This driver provides a I2C bus driver for the CGEB interface
found on some Congatec x86 modules. No devices are registered
on the bus, the user has to do this via the i2c device /sys
interface.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/i2c/busses/Kconfig | 7 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-congatec-cgeb.c | 206 ++++++++++++++++++++++++++++++++
3 files changed, 214 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-congatec-cgeb.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a3afac4..cc8eb22 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -696,6 +696,13 @@ config I2C_EG20T
ML7213/ML7223 is companion chip for Intel Atom E6xx series.
ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+config I2C_CONGATEC_CGEB
+ tristate "Congatec CGEB I2C driver"
+ depends on MFD_CONGATEC_CGEB
+ help
+ This driver provides support for the I2C busses accssable via
+ the Congatec CGEB interface found on Congatec boards.
+
comment "External I2C/SMBus adapter drivers"
config I2C_DIOLAN_U2C
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index fba6da6..4aab659 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
+obj-$(CONFIG_I2C_CONGATEC_CGEB) += i2c-congatec-cgeb.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
diff --git a/drivers/i2c/busses/i2c-congatec-cgeb.c b/drivers/i2c/busses/i2c-congatec-cgeb.c
new file mode 100644
index 0000000..a387662
--- /dev/null
+++ b/drivers/i2c/busses/i2c-congatec-cgeb.c
@@ -0,0 +1,206 @@
+/*
+ * CGEB i2c driver
+ *
+ * (c) 2011 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/congatec-cgeb.h>
+
+#define CG_I2C_FLAG_START 0x00080 /* send START condition */
+#define CG_I2C_FLAG_STOP 0x00040 /* send STOP condition */
+#define CG_I2C_FLAG_ALL_ACK 0x08000 /* send ACK on all read bytes */
+#define CG_I2C_FLAG_ALL_NAK 0x04000 /* send NAK on all read bytes */
+
+struct cgeb_i2c_priv {
+ struct cgeb_board_data *board;
+ struct i2c_adapter adapter;
+ int unit;
+};
+
+static u32 cgeb_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int cgeb_i2c_set_speed(struct cgeb_i2c_priv *priv, int speed)
+{
+ struct cgeb_function_parameters fps;
+
+ memset(&fps, 0, sizeof(fps));
+
+ fps.unit = priv->unit;
+ fps.pars[0] = speed;
+
+ return cgeb_call(priv->board, &fps, CgebI2CSetFrequency);
+}
+
+static int cgeb_i2c_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ struct cgeb_function_parameters fps;
+ int i, ret;
+ unsigned long flags = CG_I2C_FLAG_START;
+ struct cgeb_i2c_priv *priv = i2c_get_adapdata(adapter);
+ unsigned long rdlen, wrlen;
+ unsigned char *rdbuf, *wrbuf, *raw_wrbuf;
+ unsigned short lmax = 0;
+
+ /*
+ * With cgeb the I2C address is part of the write data
+ * buffer, so allocate a buffer with the length of the
+ * longest write buffer + 1
+ */
+ for (i = 0; i < num; i++)
+ if (!(msgs[i].flags & I2C_M_RD))
+ lmax = max(lmax, msgs[i].len);
+
+ raw_wrbuf = kmalloc(lmax + 1, GFP_KERNEL);
+ if (!raw_wrbuf)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++) {
+
+ if (msgs[i].flags & I2C_M_RD) {
+ rdbuf = msgs[i].buf;
+ rdlen = msgs[i].len;
+ wrbuf = NULL;
+ wrlen = 0;
+ } else {
+ rdbuf = NULL;
+ rdlen = 0;
+ wrbuf = msgs[i].buf;
+ wrlen = msgs[i].len;
+ }
+
+ raw_wrbuf[0] = msgs[i].addr << 1;
+ if (wrlen)
+ memcpy(&raw_wrbuf[1], wrbuf, wrlen);
+
+ if (msgs[i].flags & I2C_M_RD)
+ raw_wrbuf[0] |= 1;
+
+ if (i == num - 1)
+ flags |= CG_I2C_FLAG_STOP;
+
+ dev_dbg(&adapter->dev,
+ "%s: rd: %p/%ld wr: %p/%ld flags: 0x%08lx %s\n",
+ __func__, rdbuf, rdlen, raw_wrbuf, wrlen + 1,
+ flags,
+ msgs[i].flags & I2C_M_RD ? "READ" : "WRITE");
+
+ memset(&fps, 0, sizeof(fps));
+
+ fps.unit = priv->unit;
+ fps.pars[0] = wrlen + 1;
+ fps.pars[1] = rdlen;
+ fps.pars[2] = flags;
+ fps.iptr = raw_wrbuf;
+ fps.optr = rdbuf;
+
+ ret = cgeb_call(priv->board, &fps, CgebI2CTransfer);
+ if (ret) {
+ ret = -EREMOTEIO;
+ goto out;
+ }
+ }
+
+ ret = num;
+
+out:
+ kfree(raw_wrbuf);
+
+ return ret;
+
+}
+
+static struct i2c_algorithm cgeb_i2c_algo = {
+ .master_xfer = cgeb_i2c_xfer,
+ .functionality = cgeb_i2c_func,
+};
+
+static int __devinit cgeb_i2c_probe(struct platform_device *pdev)
+{
+ struct cgeb_i2c_priv *priv;
+ struct cgeb_pdata *pdata = pdev->dev.platform_data;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ strcpy(priv->adapter.name, pdev->name);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.algo = &cgeb_i2c_algo;
+ priv->adapter.dev.parent = &pdev->dev;
+ priv->unit = pdata->unit;
+ priv->board = pdata->board;
+ i2c_set_adapdata(&priv->adapter, priv);
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = cgeb_i2c_set_speed(priv, 400000);
+ if (ret)
+ /*
+ * not a critical error, we can continue with the default speed.
+ */
+ dev_warn(&pdev->dev, "Could not set speed to 400KHz\n");
+
+ ret = i2c_add_adapter(&priv->adapter);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "registration failed\n");
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "registered\n");
+
+ return 0;
+};
+
+static int __devexit cgeb_i2c_remove(struct platform_device *pdev)
+{
+ struct cgeb_i2c_priv *priv = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&priv->adapter);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver cgeb_i2c_driver = {
+ .probe = cgeb_i2c_probe,
+ .remove = __exit_p(cgeb_i2c_remove),
+ .driver = {
+ .name = "cgeb-i2c",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init cgeb_i2c_driver_init(void)
+{
+ return platform_driver_register(&cgeb_i2c_driver);
+}
+
+static void __exit cgeb_i2c_driver_exit(void)
+{
+ platform_driver_unregister(&cgeb_i2c_driver);
+}
+
+module_init(cgeb_i2c_driver_init);
+module_exit(cgeb_i2c_driver_exit);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("cgeb i2c driver");
+MODULE_LICENSE("GPL");
--
1.7.2.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
end of thread, other threads:[~2013-03-26 9:55 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-16 15:32 [RFC] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
2012-01-16 15:32 ` [PATCH 1/3] mfd: Add basic support for the Congatec CGEB BIOS interface Sascha Hauer
2012-01-16 15:32 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
2012-01-16 21:21 ` Jean Delvare
2012-01-18 11:49 ` Sascha Hauer
2012-01-16 15:32 ` [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver Sascha Hauer
2012-02-01 13:26 [RESEND] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
2012-02-01 13:26 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
2012-02-07 8:38 ` Christian Gmeiner
2012-02-07 10:10 ` Wolfram Sang
2012-02-15 13:54 ` Sascha Hauer
2012-02-13 23:22 ` Ben Dooks
2013-02-12 10:02 [PATCH] Congatec CGEB base, i2c and watchdog driver support Sascha Hauer
2013-02-12 10:02 ` [PATCH 2/3] i2c: Add Congatec CGEB I2C driver Sascha Hauer
2013-02-14 10:11 ` Wolfram Sang
2013-03-26 9:55 ` Christian Gmeiner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).