* Corrupted files after suspend to disk
@ 2011-03-23 16:31 richard -rw- weinberger
2011-03-23 20:36 ` Rafael J. Wysocki
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2011-03-23 16:31 UTC (permalink / raw)
To: LKML; +Cc: linux-pm
[-- Attachment #1: Type: text/plain, Size: 844 bytes --]
Hi,
I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
running Linux 2.6.37.4.
After resuming from s2disk some files are corrupted.
But when I reboot my netbook everything seems good again.
When I saw the problem the first time the ls command segfaulted always.
I did a reboot and it worked again.
A few days later zypper crashed. After a reboot it worked again.
And today ssh crashed. I looked a bit closer and saw it crashed
somewhere within libcrypto.
So I made copy libcrypto and rebooted.
After the reboot ssh worked again but libcrypto and the copy of it hat
a different sha1 sum!
WTF?!
Is this a known issue?
dmesgs and config are attached.
The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
(default from suse).
I'm using ext3 as root filesystem.
What else do you need?
--
Thanks,
//richard
[-- Attachment #2: dmesg_bad.txt --]
[-- Type: text/plain, Size: 143868 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.4-17-vanilla (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-03-15 00:05:21 +0100
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: LENOVO 4329A11 /Kuril , BIOS 14CN88WW 03/20/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7b70] f7b70
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ b1f000-c00000
[ 0.000000] RAMDISK: 37580000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36b10000 - 3757f5fd
[ 0.000000] Move RAMDISK from 0000000037580000 - 0000000037fef5fc to 36b10000 - 3757f5fc
[ 0.000000] ACPI: RSDP 000f7a60 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f6da15b 0007C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3f6e1d4d 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f6db355 06984 (v01 INTEL CALISTGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 3f6e2fc0 00040
[ 0.000000] ACPI: HPET 3f6e1e41 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f6e1e79 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 3f6e1eb5 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 3f6e1ee7 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 3f6e1f0d 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f6e1f75 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: ASF! 3f6e1f9d 00063 (v16 CETP CETP 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 3f6da773 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da6cd 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da1d7 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259679
[ 0.000000] free_area_init_node: node 0, pgdat c07d0700, node_mem_map f6320200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32212 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f77df000 s27200 r0 d21952 u49152
[ 0.000000] pcpu-alloc: s27200 r0 d21952 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257649
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part1 resume=/dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part2 splash=silent quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5195520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[ 0.000000] Memory: 1005564k/1039168k available (4024k kernel code, 33152k reserved, 1987k data, 428k init, 129864k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07e0000 - 0xc084b000 ( 428 kB)
[ 0.000000] .data : 0xc05ee0dc - 0xc07df028 (1987 kB)
[ 0.000000] .text : 0xc0200000 - 0xc05ee0dc (4024 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.635 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.27 BogoMIPS (lpj=6382540)
[ 0.004020] pid_max: default: 32768 minimum: 301
[ 0.004107] Security Framework initialized
[ 0.004132] AppArmor: AppArmor initialized
[ 0.004255] Mount-cache hash table entries: 512
[ 0.004470] Initializing cgroup subsys ns
[ 0.004478] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.008012] Initializing cgroup subsys cpuacct
[ 0.008021] Initializing cgroup subsys memory
[ 0.008040] Initializing cgroup subsys devices
[ 0.008045] Initializing cgroup subsys freezer
[ 0.008050] Initializing cgroup subsys net_cls
[ 0.008056] Initializing cgroup subsys blkio
[ 0.008113] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008122] CPU: Physical Processor ID: 0
[ 0.008126] CPU: Processor Core ID: 0
[ 0.008131] mce: CPU supports 5 MCE banks
[ 0.008146] CPU0: Thermal monitoring enabled (TM1)
[ 0.008153] using mwait in idle threads.
[ 0.008165] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.008181] ... version: 3
[ 0.008184] ... bit width: 40
[ 0.008188] ... generic registers: 2
[ 0.008192] ... value mask: 000000ffffffffff
[ 0.008197] ... max period: 000000007fffffff
[ 0.008201] ... fixed-purpose events: 3
[ 0.008204] ... event mask: 0000000700000003
[ 0.008769] ACPI: Core revision 20101013
[ 0.028122] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068350] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.072000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072000] CPU 1 irqstacks, hard=f58cc000 soft=f58ce000
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.164059] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164140] Brought up 2 CPUs
[ 0.164149] Total of 2 processors activated (6383.20 BogoMIPS).
[ 0.164474] devtmpfs: initialized
[ 0.164474] regulator: core version 0.5
[ 0.164474] regulator: dummy:
[ 0.164474] Time: 9:25:20 Date: 03/17/11
[ 0.164552] NET: Registered protocol family 16
[ 0.164935] ACPI: bus type pci registered
[ 0.165115] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165125] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.165130] PCI: Using MMCONFIG for extended config space
[ 0.165135] PCI: Using configuration type 1 for base access
[ 0.168072] bio: create slab <bio-0> at 0
[ 0.172111] ACPI: EC: Look up EC in DSDT
[ 0.181791] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.184011] ACPI: SSDT 3f6db03c 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.184814] ACPI: Dynamic OEM Table Load:
[ 0.184823] ACPI: SSDT (null) 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.185516] ACPI: SSDT 3f6da9d2 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.186259] ACPI: Dynamic OEM Table Load:
[ 0.186267] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.187210] ACPI: SSDT 3f6db281 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.188011] ACPI: Dynamic OEM Table Load:
[ 0.188020] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.188371] ACPI: SSDT 3f6dafb7 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.189117] ACPI: Dynamic OEM Table Load:
[ 0.189125] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.192333] ACPI: Interpreter enabled
[ 0.192348] ACPI: (supports S0 S3 S4 S5)
[ 0.192403] ACPI: Using IOAPIC for interrupt routing
[ 0.215300] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.215790] ACPI: No dock devices found.
[ 0.215801] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.217253] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.220082] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.220090] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.220097] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.220104] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.220113] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.220122] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[ 0.220154] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.220223] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.220240] pci 0000:00:02.0: reg 10: [mem 0xf0500000-0xf057ffff]
[ 0.220252] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.220263] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.220275] pci 0000:00:02.0: reg 1c: [mem 0xf0600000-0xf063ffff]
[ 0.220326] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.220341] pci 0000:00:02.1: reg 10: [mem 0xf0580000-0xf05fffff]
[ 0.220468] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.220500] pci 0000:00:1b.0: reg 10: [mem 0xf0640000-0xf0643fff 64bit]
[ 0.220602] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.220611] pci 0000:00:1b.0: PME# disabled
[ 0.220651] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.220755] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.220764] pci 0000:00:1c.0: PME# disabled
[ 0.220809] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.220914] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.220923] pci 0000:00:1c.1: PME# disabled
[ 0.220965] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.221068] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.221077] pci 0000:00:1c.2: PME# disabled
[ 0.221125] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.221196] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.221252] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.221322] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.221379] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.221449] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.221505] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.221575] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.221646] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.221678] pci 0000:00:1d.7: reg 10: [mem 0xf0844000-0xf08443ff]
[ 0.221790] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.221799] pci 0000:00:1d.7: PME# disabled
[ 0.221833] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.221940] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.222057] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.222066] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.222079] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.222133] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.222156] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.222174] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.222192] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.222210] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.222229] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.222292] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.222319] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf]
[ 0.222336] pci 0000:00:1f.2: reg 14: [io 0x18c0-0x18c3]
[ 0.222353] pci 0000:00:1f.2: reg 18: [io 0x18a8-0x18af]
[ 0.222371] pci 0000:00:1f.2: reg 1c: [io 0x180c-0x180f]
[ 0.222388] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.222405] pci 0000:00:1f.2: reg 24: [mem 0xf0844400-0xf08447ff]
[ 0.222450] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.222459] pci 0000:00:1f.2: PME# disabled
[ 0.222495] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.222574] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.222811] pci 0000:02:00.0: [14e4:1713] type 0 class 0x000200
[ 0.222887] pci 0000:02:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.223207] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.223223] pci 0000:02:00.0: PME# disabled
[ 0.223371] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.223380] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.223389] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.223403] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.223483] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.223492] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.223501] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.223514] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.223846] pci 0000:05:00.0: [14e4:4315] type 0 class 0x000280
[ 0.223922] pci 0000:05:00.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
[ 0.224237] pci 0000:05:00.0: supports D1 D2
[ 0.224243] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.224258] pci 0000:05:00.0: PME# disabled
[ 0.224450] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.224460] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.224470] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.224483] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.224583] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.224592] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.224602] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.224615] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.224622] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.224629] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.224636] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.224643] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.224650] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.224657] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.224693] pci_bus 0000:00: on NUMA node 0
[ 0.224705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.225140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.225302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.225455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.225669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.239330] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.239522] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.239706] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.239893] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.240106] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.240302] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.240488] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.240671] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.240750] HEST: Table is not found!
[ 0.240908] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.240929] vgaarb: loaded
[ 0.241358] SCSI subsystem initialized
[ 0.241471] PCI: Using ACPI for IRQ routing
[ 0.241471] PCI: pci_cache_line_size set to 64 bytes
[ 0.241471] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.241471] reserve RAM buffer: 000000003f6d0000 - 000000003fffffff
[ 0.241471] NetLabel: Initializing
[ 0.241471] NetLabel: domain hash size = 128
[ 0.241471] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.241471] NetLabel: unlabeled traffic allowed by default
[ 0.241471] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.241471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.241471] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.248063] Switching to clocksource tsc
[ 0.250487] AppArmor: AppArmor Filesystem Enabled
[ 0.250522] pnp: PnP ACPI init
[ 0.250583] ACPI: bus type pnp registered
[ 0.254281] pnp 00:00: [bus 00-ff]
[ 0.254290] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.254296] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.254302] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.254308] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.254314] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.254320] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.254326] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.254332] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.254338] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.254345] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.254351] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.254357] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.254363] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.254369] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.254375] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.254381] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.254387] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.254393] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.254400] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.254556] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.254645] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.254652] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.254657] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.254663] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.254669] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.254674] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.254680] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.254685] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.254814] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255406] pnp 00:02: [io 0x0000-0x001f]
[ 0.255412] pnp 00:02: [io 0x0081-0x0091]
[ 0.255418] pnp 00:02: [io 0x0093-0x009f]
[ 0.255423] pnp 00:02: [io 0x00c0-0x00df]
[ 0.255429] pnp 00:02: [dma 4]
[ 0.255531] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.255809] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.255955] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.256002] pnp 00:04: [io 0x00f0]
[ 0.256022] pnp 00:04: [irq 13]
[ 0.256129] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.256169] pnp 00:05: [io 0x0061]
[ 0.256174] pnp 00:05: [io 0x0063]
[ 0.256179] pnp 00:05: [io 0x0065]
[ 0.256184] pnp 00:05: [io 0x0067]
[ 0.256189] pnp 00:05: [io 0x0070]
[ 0.256194] pnp 00:05: [io 0x0080]
[ 0.256199] pnp 00:05: [io 0x0092]
[ 0.256204] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.256209] pnp 00:05: [io 0x0800-0x080f]
[ 0.256214] pnp 00:05: [io 0x1000-0x107f]
[ 0.256219] pnp 00:05: [io 0x1180-0x11bf]
[ 0.256225] pnp 00:05: [io 0x1640-0x164f]
[ 0.256230] pnp 00:05: [io 0xfe00]
[ 0.256235] pnp 00:05: [io 0x0380-0x0384]
[ 0.256240] pnp 00:05: [io 0x0386-0x0387]
[ 0.256400] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256486] pnp 00:06: [io 0x06a0-0x06af]
[ 0.256492] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.256620] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256654] pnp 00:07: [io 0x0070-0x0077]
[ 0.256668] pnp 00:07: [irq 8]
[ 0.256775] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.256856] pnp 00:08: [io 0x0060]
[ 0.256862] pnp 00:08: [io 0x0064]
[ 0.256874] pnp 00:08: [irq 1]
[ 0.256988] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.257027] pnp 00:09: [irq 12]
[ 0.257149] pnp 00:09: Plug and Play ACPI device, IDs SYN1024 SYN1000 SYN0002 PNP0f13 (active)
[ 0.257227] pnp: PnP ACPI: found 10 devices
[ 0.257232] ACPI: ACPI bus type pnp unregistered
[ 0.257240] PnPBIOS: Disabled by ACPI PNP
[ 0.257266] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.257274] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.257281] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.257289] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.257296] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.257303] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.257310] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.257318] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.257332] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.257347] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.257354] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.257361] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.257368] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.257375] system 00:05: [io 0xfe00] has been reserved
[ 0.257381] system 00:05: [io 0x0380-0x0384] has been reserved
[ 0.257388] system 00:05: [io 0x0386-0x0387] has been reserved
[ 0.257401] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.257407] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.297706] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.297719] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.297727] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.297735] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.297746] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.297756] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.297769] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.297776] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.297787] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.297797] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.297810] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.297817] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.297828] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.297838] pci 0000:00:1c.2: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.297850] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.297855] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.297864] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.297873] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.297918] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.297929] pci 0000:00:1c.0: setting latency timer to 64
[ 0.297951] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.297960] pci 0000:00:1c.1: setting latency timer to 64
[ 0.297988] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.297998] pci 0000:00:1c.2: setting latency timer to 64
[ 0.298014] pci 0000:00:1e.0: setting latency timer to 64
[ 0.298023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.298030] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.298036] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.298042] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.298049] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.298055] pci_bus 0000:00: resource 9 [mem 0x40000000-0xfebfffff]
[ 0.298062] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.298068] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.298075] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.298082] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.298088] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.298095] pci_bus 0000:03: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.298102] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.298108] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.298115] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.298122] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.298128] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.298134] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.298140] pci_bus 0000:06: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.298146] pci_bus 0000:06: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.298153] pci_bus 0000:06: resource 9 [mem 0x40000000-0xfebfffff]
[ 0.298299] NET: Registered protocol family 2
[ 0.298464] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.299134] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.300190] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.300691] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.300698] TCP reno registered
[ 0.300709] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.300730] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.301060] NET: Registered protocol family 1
[ 0.301107] pci 0000:00:02.0: Boot video device
[ 0.301515] PCI: CLS 64 bytes, default 64
[ 0.301633] Unpacking initramfs...
[ 0.776017] Freeing initrd memory: 10688k freed
[ 0.787103] Simple Boot Flag at 0x36 set to 0x1
[ 0.787929] Scanning for low memory corruption every 60 seconds
[ 0.788312] audit: initializing netlink socket (disabled)
[ 0.788338] type=2000 audit(1300353920.784:1): initialized
[ 0.818293] highmem bounce pool size: 64 pages
[ 0.818306] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.818719] VFS: Disk quotas dquot_6.5.2
[ 0.818795] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.819110] msgmni has been set to 1731
[ 0.819528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.819586] io scheduler noop registered
[ 0.819593] io scheduler deadline registered
[ 0.819640] io scheduler cfq registered (default)
[ 0.820298] intel_idle: MWAIT substates: 0x20220
[ 0.820320] intel_idle: v0.4 model 0x1C
[ 0.820325] intel_idle: lapic_timer_reliable_states 0x2
[ 0.820344] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.820429] ERST: Table is not found!
[ 0.820470] isapnp: Scanning for PnP cards...
[ 1.174278] isapnp: No Plug & Play device found
[ 1.174811] Switching to clocksource hpet
[ 1.175099] Non-volatile memory driver v1.3
[ 1.175106] Linux agpgart interface v0.103
[ 1.175323] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.175514] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.175682] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.179409] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.179606] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.217681] Fixed MDIO Bus: probed
[ 1.217807] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.229330] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.229336] If AUX port is really absent please use the 'i8042.noaux' option.
[ 1.242545] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.242562] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.242825] mice: PS/2 mouse device common for all mice
[ 1.244179] cpuidle: using governor ladder
[ 1.244452] cpuidle: using governor menu
[ 1.245034] TCP cubic registered
[ 1.245192] NET: Registered protocol family 10
[ 1.245956] lo: Disabled Privacy Extensions
[ 1.246460] Registering the dns_resolver key type
[ 1.246604] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 1.246632] Using IPI No-Shortcut mode
[ 1.246915] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part2
[ 1.265574] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.278930] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 2.351301] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 2.356214] PM: Hibernation image not present or could not be loaded.
[ 2.356285] registered taskstats version 1
[ 2.357115] Magic number: 3:585:424
[ 2.357393] Freeing unused kernel memory: 428k freed
[ 2.357758] Write protecting the kernel text: 4028k
[ 2.357831] Write protecting the kernel read-only data: 1732k
[ 2.463222] ACPI: acpi_idle yielding to intel_idle
[ 2.493759] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.493768] ACPI: Thermal Zone [TZ00] (44 C)
[ 2.533542] udev[70]: starting version 166
[ 2.636648] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.636836] ACPI: Power Button [PWRB]
[ 2.637037] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.637190] ACPI: Sleep Button [SLPB]
[ 2.637394] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 2.843612] acpi device:04: registered as cooling_device2
[ 2.844108] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.844280] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.884224] ACPI: Lid Switch [LID]
[ 2.884498] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 2.884662] ACPI: Power Button [PWRF]
[ 2.957381] usbcore: registered new interface driver usbfs
[ 2.957480] usbcore: registered new interface driver hub
[ 2.967189] usbcore: registered new device driver usb
[ 3.034466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.034557] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.034615] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.034627] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.034692] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.039514] libata version 3.00 loaded.
[ 3.056406] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 3.056434] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.060338] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.060389] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
[ 3.079859] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.079934] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.079945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.079955] usb usb1: Product: EHCI Host Controller
[ 3.079962] usb usb1: Manufacturer: Linux 2.6.37.4-17-vanilla ehci_hcd
[ 3.079970] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.080455] hub 1-0:1.0: USB hub found
[ 3.080472] hub 1-0:1.0: 8 ports detected
[ 3.084992] rtc_cmos 00:07: RTC can wake from S4
[ 3.105637] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.105767] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.105793] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.105803] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.105845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.121897] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.121955] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.131774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 3.131900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.131910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.131919] usb usb2: Product: UHCI Host Controller
[ 3.131926] usb usb2: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.131934] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.132466] hub 2-0:1.0: USB hub found
[ 3.132484] hub 2-0:1.0: 2 ports detected
[ 3.132755] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.132777] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.132787] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.132822] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.173447] [drm] Initialized drm 1.1.0 20060810
[ 3.192332] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 3.192464] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.192475] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.192484] usb usb3: Product: UHCI Host Controller
[ 3.192492] usb usb3: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.192499] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.192989] hub 3-0:1.0: USB hub found
[ 3.193006] hub 3-0:1.0: 2 ports detected
[ 3.193269] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.193291] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.193301] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.193338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.249975] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 3.250104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.250114] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.250123] usb usb4: Product: UHCI Host Controller
[ 3.250129] usb usb4: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.250136] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.250634] hub 4-0:1.0: USB hub found
[ 3.250653] hub 4-0:1.0: 2 ports detected
[ 3.250927] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.250952] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.250964] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.250997] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.264247] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 3.264378] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.264386] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.264392] usb usb5: Product: UHCI Host Controller
[ 3.264398] usb usb5: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.264403] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.264799] hub 5-0:1.0: USB hub found
[ 3.264817] hub 5-0:1.0: 2 ports detected
[ 3.265056] ata_piix 0000:00:1f.1: version 2.13
[ 3.265092] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.265229] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.266807] scsi0 : ata_piix
[ 3.267379] scsi1 : ata_piix
[ 3.269393] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 3.269407] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 3.269509] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.269525] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 3.269990] ata2: port disabled. ignoring.
[ 3.392171] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.424180] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.426978] scsi2 : ata_piix
[ 3.427542] scsi3 : ata_piix
[ 3.427811] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 3.427821] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 3.428581] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.428597] i915 0000:00:02.0: setting latency timer to 64
[ 3.530125] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.530632] [drm] initialized overlay support
[ 3.647575] ata3.00: ATA-8: WDC WD1600BEVS-08VAT2, 14.01A14, max UDMA/133
[ 3.647594] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.653043] ata3.00: configured for UDMA/133
[ 3.653430] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 14.0 PQ: 0 ANSI: 5
[ 3.654266] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.654519] sd 2:0:0:0: [sda] Write Protect is off
[ 3.654531] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.655301] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.686000] sda: sda1 sda2 sda3
[ 3.687092] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.706614] usb 1-3: New USB device found, idVendor=5986, idProduct=0241
[ 3.706632] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.706645] usb 1-3: Product: Lenovo EasyCamera
[ 3.706655] usb 1-3: Manufacturer: BISON Corporation
[ 3.835255] Console: switching to colour frame buffer device 128x36
[ 3.842579] fb0: inteldrmfb frame buffer device
[ 3.842585] drm: registered panic notifier
[ 3.842867] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.956121] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 4.099356] usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
[ 4.099368] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.099377] usb 1-5: Product: USB2.0-CRW
[ 4.099383] usb 1-5: Manufacturer: Generic
[ 4.099390] usb 1-5: SerialNumber: 20071114173400000
[ 4.133572] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 4.133583] PM: Basic memory bitmaps created
[ 4.148332] PM: Basic memory bitmaps freed
[ 4.148345] video LNXVIDEO:00: Restoring backlight state
[ 4.216151] usb 1-7: new high speed USB device using ehci_hcd and address 5
[ 4.230445] PM: Starting manual resume from disk
[ 4.230453] PM: Hibernation image partition 8:2 present
[ 4.230457] PM: Looking for hibernation image.
[ 4.230851] PM: Image not found (code -22)
[ 4.230860] PM: Hibernation image not present or could not be loaded.
[ 4.352348] usb 1-7: New USB device found, idVendor=0bdb, idProduct=1900
[ 4.352358] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.352365] usb 1-7: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 4.352371] usb 1-7: Manufacturer: Ericsson
[ 4.352375] usb 1-7: SerialNumber: 0115650004270950
[ 4.600138] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 4.773597] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2150
[ 4.773615] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.773629] usb 3-2: Product: BCM2046 Bluetooth Device
[ 4.773639] usb 3-2: Manufacturer: Broadcom Corp
[ 4.773649] usb 3-2: SerialNumber: 00242CF78FB9
[ 6.532782] EXT3-fs: barriers not enabled
[ 6.543061] kjournald starting. Commit interval 5 seconds
[ 6.543573] EXT3-fs (sda1): using internal journal
[ 6.543592] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.551956] udev[401]: starting version 166
[ 10.749769] ACPI: AC Adapter [ACAD] (off-line)
[ 10.798236] ACPI: Battery Slot [BAT0] (battery present)
[ 11.137938] wmi: Mapper loaded
[ 11.459775] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 11.556385] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 11.605330] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.638712] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 11.638729] ACPI: resource 0000:00:1f.3 [io 0x18e0-0x18ff] conflicts with ACPI region SMBI [??? 0x000018e0-0x000018ef flags 0x49]
[ 11.638739] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.707927] intel_rng: FWH not detected
[ 11.773846] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.943201] Bluetooth: Core ver 2.15
[ 11.943274] NET: Registered protocol family 31
[ 11.943281] Bluetooth: HCI device and connection manager initialized
[ 11.943289] Bluetooth: HCI socket layer initialized
[ 11.982488] cdc_wdm 1-7:1.5: cdc-wdm0: USB WDM device
[ 11.982641] cdc_wdm 1-7:1.6: cdc-wdm1: USB WDM device
[ 11.982705] usbcore: registered new interface driver cdc_wdm
[ 11.995453] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 11.997200] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 11.998682] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 11.999598] usbcore: registered new interface driver cdc_acm
[ 11.999608] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 12.078412] usb 1-5: selecting invalid altsetting 1
[ 12.078490] usbcore: registered new interface driver uas
[ 12.113865] Linux video capture interface: v2.00
[ 12.122148] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.123471] usbcore: registered new interface driver btusb
[ 12.282028] iTCO_vendor_support: vendor-support=0
[ 12.358870] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 12.359141] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 12.359338] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.385666] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
[ 12.390338] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8
[ 12.390586] usbcore: registered new interface driver uvcvideo
[ 12.390594] USB Video Class driver (v1.0.0)
[ 12.438231] Initializing USB Mass Storage driver...
[ 12.439863] scsi4 : usb-storage 1-5:1.0
[ 12.440466] usbcore: registered new interface driver usb-storage
[ 12.440476] USB Mass Storage support registered.
[ 12.442375] cdc_ether 1-7:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-7, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 12.442489] usbcore: registered new interface driver cdc_ether
[ 12.522410] tg3.c:v3.115 (October 14, 2010)
[ 12.522489] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.522518] tg3 0000:02:00.0: setting latency timer to 64
[ 12.597987] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:23:8b:95:a7:20
[ 12.598004] tg3 0000:02:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 12.598015] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 12.598025] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 12.738431] usbcore: registered new interface driver zaurus
[ 12.763935] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.764127] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 12.764192] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.767619] leds_ss4200: no LED devices found
[ 12.879759] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.879790] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[ 12.896597] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 12.896621] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 12.896644] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 12.896665] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 12.948445] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 13.015885] ALSA patch_realtek.c:1521: SKU: Nid=0x1d sku_cfg=0x4015812d
[ 13.015898] ALSA patch_realtek.c:1523: SKU: port_connectivity=0x1
[ 13.015908] ALSA patch_realtek.c:1524: SKU: enable_pcbeep=0x1
[ 13.015916] ALSA patch_realtek.c:1525: SKU: check_sum=0x00000005
[ 13.015925] ALSA patch_realtek.c:1526: SKU: customization=0x00000081
[ 13.015934] ALSA patch_realtek.c:1527: SKU: external_amp=0x5
[ 13.015943] ALSA patch_realtek.c:1528: SKU: platform_type=0x1
[ 13.015951] ALSA patch_realtek.c:1529: SKU: swap=0x0
[ 13.015959] ALSA patch_realtek.c:1530: SKU: override=0x1
[ 13.019075] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.019364] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.213962] cfg80211: Calling CRDA to update world regulatory domain
[ 13.442684] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 13.443495] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 13.451604] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.570508] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 13.789085] cfg80211: World regulatory domain updated:
[ 13.789094] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.789102] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.789109] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.789115] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.789122] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.789128] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.984305] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.985942] Registered led device: b43-phy0::tx
[ 13.986036] Registered led device: b43-phy0::rx
[ 13.986136] Registered led device: b43-phy0::radio
[ 13.986189] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 14.426804] Adding 1566332k swap on /dev/sda2. Priority:-1 extents:1 across:1566332k
[ 15.701712] device-mapper: uevent: version 1.0.3
[ 15.702152] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 18.277239] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[ 18.425694] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
[ 18.430843] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 18.860011] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 18.869004] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 21.256311] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.488589] nf_conntrack version 0.5.0 (15885 buckets, 63540 max)
[ 21.555295] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.874003] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 29.656972] Bluetooth: L2CAP ver 2.15
[ 29.656980] Bluetooth: L2CAP socket layer initialized
[ 29.709160] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.709169] Bluetooth: BNEP filters: protocol multicast
[ 30.083182] Bluetooth: SCO (Voice Link) ver 0.6
[ 30.083193] Bluetooth: SCO socket layer initialized
[ 30.457747] Bluetooth: RFCOMM TTY layer initialized
[ 30.457771] Bluetooth: RFCOMM socket layer initialized
[ 30.457781] Bluetooth: RFCOMM ver 1.11
[ 31.592236] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 31.626773] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.605502] padlock: VIA PadLock Hash Engine not detected.
[ 44.651593] device-mapper: ioctl: unable to remove open device temporary-cryptsetup-1745
[ 46.137831] EXT3-fs: barriers not enabled
[ 47.066995] kjournald starting. Commit interval 5 seconds
[ 47.067134] EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 47.067862] EXT3-fs (dm-0): using internal journal
[ 47.067877] EXT3-fs (dm-0): recovery complete
[ 47.068684] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 48.855912] start_kdeinit (1895): /proc/1895/oom_adj is deprecated, please use /proc/1895/oom_score_adj instead.
[ 63.018306] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 71.103460] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 77.104184] usbcore: deregistering interface driver cdc_acm
[ 77.158866] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 77.161645] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 77.164082] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 77.167246] usbcore: registered new interface driver cdc_acm
[ 77.167256] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 114.844181] usbcore: deregistering interface driver cdc_acm
[ 114.913400] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 114.915573] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 114.918236] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 114.920686] usbcore: registered new interface driver cdc_acm
[ 114.920696] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 123.128193] PPP generic driver version 2.4.2
[ 123.257626] PPP BSD Compression module registered
[ 123.297436] PPP Deflate Compression module registered
[ 1056.149273] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1056.149288] PM: Basic memory bitmaps created
[ 1056.224271] Syncing filesystems ... done.
[ 1056.228715] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1056.244231] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1056.260409] PM: Preallocating image memory... done (allocated 141765 pages)
[ 1056.643306] PM: Allocated 567060 kbytes in 0.38 seconds (1492.26 MB/s)
[ 1056.643312] Suspending console(s) (use no_console_suspend to debug)
[ 1056.644221] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1056.645159] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 1056.645475] pci 0000:00:1f.3: PCI INT B disabled
[ 1056.645656] ata2: port disabled. ignoring.
[ 1056.645756] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 1056.690505] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 1056.748264] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1056.764211] PM: freeze of devices complete after 120.509 msecs
[ 1056.764917] PM: late freeze of devices complete after 0.688 msecs
[ 1056.764966] ACPI: Preparing to enter system sleep state S4
[ 1056.857581] PM: Saving platform NVS memory
[ 1056.857772] Disabling non-boot CPUs ...
[ 1056.960118] CPU 1 is now offline
[ 1056.960129] SMP alternatives: switching to UP code
[ 1056.968163] Extended CMOS year: 2000
[ 1056.968274] PM: Creating hibernation image:
[ 1056.972019] PM: Need to copy 109731 pages
[ 1056.972019] PM: Normal pages needed: 94669 + 1024, available pages: 134867
[ 1056.972019] PM: Restoring platform NVS memory
[ 1056.972019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 1056.972019] CPU0: Thermal monitoring handled by SMI
[ 1056.972019] Extended CMOS year: 2000
[ 1056.972019] Enabling non-boot CPUs ...
[ 1056.972019] SMP alternatives: switching to SMP code
[ 1056.975328] Booting Node 0 Processor 1 APIC 0x1
[ 1056.967018] Initializing CPU#1
[ 1056.967018] CPU1: Thermal monitoring handled by SMI
[ 1057.064638] NMI watchdog enabled, takes one hw-pmu counter.
[ 1057.069229] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 1057.072152] CPU1 is up
[ 1057.072325] ACPI: Waking up from system sleep state S4
[ 1057.160472] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 1057.160975] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 1057.161021] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 1057.161202] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 1057.161868] PM: early restore of devices complete after 1.542 msecs
[ 1057.233004] i915 0000:00:02.0: setting latency timer to 64
[ 1057.237116] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1057.237132] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1057.237203] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 1057.237276] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1057.237287] pci 0000:00:1c.0: setting latency timer to 64
[ 1057.237306] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1057.237317] pci 0000:00:1c.1: setting latency timer to 64
[ 1057.237336] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1057.237346] pci 0000:00:1c.2: setting latency timer to 64
[ 1057.237363] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1057.237413] usb usb2: root hub lost power or was reset
[ 1057.237434] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1057.237481] usb usb3: root hub lost power or was reset
[ 1057.237502] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1057.237549] usb usb4: root hub lost power or was reset
[ 1057.237569] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1057.237616] usb usb5: root hub lost power or was reset
[ 1057.237638] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1057.237677] usb usb1: root hub lost power or was reset
[ 1057.241581] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1057.241606] pci 0000:00:1e.0: setting latency timer to 64
[ 1057.241635] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1057.241646] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1057.241693] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1057.241704] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1057.241741] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1057.241963] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1057.242545] sd 2:0:0:0: [sda] Starting disk
[ 1057.245740] ata2: port disabled. ignoring.
[ 1057.464702] ata3.00: configured for UDMA/133
[ 1057.708161] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 1057.976162] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 1058.220157] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 1058.369742] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 1058.369751] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 1058.464143] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 1058.603986] PM: restore of devices complete after 1371.331 msecs
[ 1058.617959] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 1058.617970] Restarting tasks ... done.
[ 1058.660997] PM: Basic memory bitmaps freed
[ 1058.661014] video LNXVIDEO:00: Restoring backlight state
[ 1062.900733] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1062.936679] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1079.753180] usbcore: deregistering interface driver cdc_acm
[ 1079.822086] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 1079.824541] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 1079.827229] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 1079.831600] usbcore: registered new interface driver cdc_acm
[ 1079.831610] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1251.938497] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1251.938512] PM: Basic memory bitmaps created
[ 1252.013574] Syncing filesystems ... done.
[ 1252.016769] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1252.032269] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1252.052087] PM: Preallocating image memory... done (allocated 141761 pages)
[ 1252.283026] PM: Allocated 567044 kbytes in 0.23 seconds (2465.40 MB/s)
[ 1252.283033] Suspending console(s) (use no_console_suspend to debug)
[ 1252.290505] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 1252.291437] pci 0000:00:1f.3: PCI INT B disabled
[ 1252.291578] ata2: port disabled. ignoring.
[ 1252.291678] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 1252.396260] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1252.488138] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1252.538810] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 1252.538851] PM: freeze of devices complete after 255.433 msecs
[ 1252.539505] PM: late freeze of devices complete after 0.641 msecs
[ 1252.539554] ACPI: Preparing to enter system sleep state S4
[ 1252.633607] PM: Saving platform NVS memory
[ 1252.633815] Disabling non-boot CPUs ...
[ 1252.736121] CPU 1 is now offline
[ 1252.736133] SMP alternatives: switching to UP code
[ 1252.744167] Extended CMOS year: 2000
[ 1252.744278] PM: Creating hibernation image:
[ 1252.748017] PM: Need to copy 113888 pages
[ 1252.748017] PM: Normal pages needed: 112001 + 1024, available pages: 143885
[ 1252.748017] PM: Restoring platform NVS memory
[ 1252.748017] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 1252.748017] CPU0: Thermal monitoring handled by SMI
[ 1252.748017] Extended CMOS year: 2000
[ 1252.748017] Enabling non-boot CPUs ...
[ 1252.748017] SMP alternatives: switching to SMP code
[ 1252.751176] Booting Node 0 Processor 1 APIC 0x1
[ 1252.743073] Initializing CPU#1
[ 1252.743073] CPU1: Thermal monitoring handled by SMI
[ 1252.840722] NMI watchdog enabled, takes one hw-pmu counter.
[ 1252.845316] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 1252.848147] CPU1 is up
[ 1252.848320] ACPI: Waking up from system sleep state S4
[ 1252.936471] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 1252.936975] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 1252.937020] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 1252.937201] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 1252.937865] PM: early restore of devices complete after 1.540 msecs
[ 1253.011750] i915 0000:00:02.0: setting latency timer to 64
[ 1253.016261] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1253.016277] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1253.016347] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 1253.016420] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1253.016431] pci 0000:00:1c.0: setting latency timer to 64
[ 1253.016450] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1253.016460] pci 0000:00:1c.1: setting latency timer to 64
[ 1253.016479] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1253.016490] pci 0000:00:1c.2: setting latency timer to 64
[ 1253.016507] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1253.016556] usb usb2: root hub lost power or was reset
[ 1253.016578] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1253.016625] usb usb3: root hub lost power or was reset
[ 1253.016646] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1253.016692] usb usb4: root hub lost power or was reset
[ 1253.016712] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1253.016759] usb usb5: root hub lost power or was reset
[ 1253.016781] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1253.016820] usb usb1: root hub lost power or was reset
[ 1253.020708] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1253.020733] pci 0000:00:1e.0: setting latency timer to 64
[ 1253.020761] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1253.020772] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1253.020819] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1253.020830] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1253.020864] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1253.021085] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1253.021602] sd 2:0:0:0: [sda] Starting disk
[ 1253.021863] ata2: port disabled. ignoring.
[ 1253.245156] ata3.00: configured for UDMA/133
[ 1253.488157] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 1253.756166] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 1253.905620] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 1253.905635] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 1254.000169] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 1254.244129] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 1254.381940] PM: restore of devices complete after 1370.545 msecs
[ 1254.399515] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 1254.399524] Restarting tasks ... done.
[ 1254.495445] PM: Basic memory bitmaps freed
[ 1254.495463] video LNXVIDEO:00: Restoring backlight state
[ 1255.770458] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1255.805118] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1269.448113] usbcore: deregistering interface driver cdc_acm
[ 1269.517175] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 1269.520709] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 1269.521900] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 1269.524482] usbcore: registered new interface driver cdc_acm
[ 1269.524492] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1309.532229] usbcore: deregistering interface driver cdc_acm
[ 1309.592135] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 1309.594543] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 1309.597832] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 1309.600324] usbcore: registered new interface driver cdc_acm
[ 1309.600334] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2345.291315] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2345.291329] PM: Basic memory bitmaps created
[ 2345.380254] Syncing filesystems ... done.
[ 2345.382927] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2345.396232] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2345.415158] PM: Preallocating image memory... done (allocated 141755 pages)
[ 2345.685113] PM: Allocated 567020 kbytes in 0.26 seconds (2180.84 MB/s)
[ 2345.685119] Suspending console(s) (use no_console_suspend to debug)
[ 2345.685957] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 2345.686935] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 2345.687259] pci 0000:00:1f.3: PCI INT B disabled
[ 2345.687481] ata2: port disabled. ignoring.
[ 2345.687615] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 2345.792253] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 2346.079230] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 2346.079271] PM: freeze of devices complete after 393.783 msecs
[ 2346.079924] PM: late freeze of devices complete after 0.642 msecs
[ 2346.079974] ACPI: Preparing to enter system sleep state S4
[ 2346.173559] PM: Saving platform NVS memory
[ 2346.173774] Disabling non-boot CPUs ...
[ 2346.276120] CPU 1 is now offline
[ 2346.276132] SMP alternatives: switching to UP code
[ 2346.284331] Extended CMOS year: 2000
[ 2346.284443] PM: Creating hibernation image:
[ 2346.288019] PM: Need to copy 113916 pages
[ 2346.288019] PM: Normal pages needed: 107298 + 1024, available pages: 139126
[ 2346.288019] PM: Restoring platform NVS memory
[ 2346.288019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 2346.288019] CPU0: Thermal monitoring handled by SMI
[ 2346.288019] Extended CMOS year: 2000
[ 2346.288019] Enabling non-boot CPUs ...
[ 2346.288019] SMP alternatives: switching to SMP code
[ 2346.291337] Booting Node 0 Processor 1 APIC 0x1
[ 2346.283088] Initializing CPU#1
[ 2346.283088] CPU1: Thermal monitoring handled by SMI
[ 2346.380734] NMI watchdog enabled, takes one hw-pmu counter.
[ 2346.385334] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 2346.388146] CPU1 is up
[ 2346.388317] ACPI: Waking up from system sleep state S4
[ 2346.476472] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 2346.476975] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 2346.477020] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 2346.477201] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 2346.477865] PM: early restore of devices complete after 1.538 msecs
[ 2346.551378] i915 0000:00:02.0: setting latency timer to 64
[ 2346.556072] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2346.556087] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2346.556158] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 2346.556231] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2346.556242] pci 0000:00:1c.0: setting latency timer to 64
[ 2346.556261] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2346.556272] pci 0000:00:1c.1: setting latency timer to 64
[ 2346.556290] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2346.556301] pci 0000:00:1c.2: setting latency timer to 64
[ 2346.556317] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2346.556368] usb usb2: root hub lost power or was reset
[ 2346.556389] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2346.556436] usb usb3: root hub lost power or was reset
[ 2346.556457] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2346.556504] usb usb4: root hub lost power or was reset
[ 2346.556524] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2346.556570] usb usb5: root hub lost power or was reset
[ 2346.556592] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2346.556631] usb usb1: root hub lost power or was reset
[ 2346.560538] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2346.560564] pci 0000:00:1e.0: setting latency timer to 64
[ 2346.560592] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2346.560603] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2346.560651] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2346.560662] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2346.560695] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2346.560916] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2346.561501] sd 2:0:0:0: [sda] Starting disk
[ 2346.565103] ata2: port disabled. ignoring.
[ 2346.773269] ata3.00: configured for UDMA/133
[ 2347.028127] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 2347.272156] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 2347.540157] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 2347.784152] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 2347.934909] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 2347.934917] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 2347.935388] PM: restore of devices complete after 1384.360 msecs
[ 2347.952005] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 2347.952052] Restarting tasks ... done.
[ 2348.019766] PM: Basic memory bitmaps freed
[ 2348.019779] video LNXVIDEO:00: Restoring backlight state
[ 2350.758583] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 2350.805002] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2362.140187] usbcore: deregistering interface driver cdc_acm
[ 2362.206235] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 2362.208414] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 2362.211575] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 2362.212527] usbcore: registered new interface driver cdc_acm
[ 2362.212537] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3335.928419] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 3341.371749] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3341.599949] NET: Registered protocol family 17
[ 3345.904833] wlan0: authenticate with 00:0e:84:40:c8:e0 (try 1)
[ 3345.912230] wlan0: authenticated
[ 3345.920441] wlan0: associate with 00:0e:84:40:c8:e0 (try 1)
[ 3345.929203] wlan0: RX AssocResp from 00:0e:84:40:c8:e0 (capab=0x431 status=0 aid=18)
[ 3345.929223] wlan0: associated
[ 3345.935598] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3345.935839] cfg80211: Calling CRDA for country: AT
[ 3346.089768] cfg80211: Regulatory domain changed to country: AT
[ 3346.089780] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3346.089791] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3346.089800] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3346.089809] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3346.089818] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 3356.864089] wlan0: no IPv6 routers present
[ 5124.972238] wlan0: deauthenticated from 00:0e:84:40:c8:e0 (Reason: 1)
[ 5124.996373] cfg80211: Calling CRDA to update world regulatory domain
[ 5125.015561] cfg80211: World regulatory domain updated:
[ 5125.015576] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5125.015594] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5125.015611] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5125.015630] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5125.015649] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5125.015667] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5126.393035] wlan0: authenticate with 00:0e:84:40:c8:e0 (try 1)
[ 5126.404368] wlan0: authenticated
[ 5126.405159] wlan0: associate with 00:0e:84:40:c8:e0 (try 1)
[ 5126.410987] wlan0: RX AssocResp from 00:0e:84:40:c8:e0 (capab=0x431 status=0 aid=18)
[ 5126.410996] wlan0: associated
[ 5126.413753] cfg80211: Calling CRDA for country: AT
[ 5126.433635] cfg80211: Regulatory domain changed to country: AT
[ 5126.433645] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5126.433655] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5126.433663] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5126.433671] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5126.433679] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 5549.828309] wlan0: deauthenticating from 00:0e:84:40:c8:e0 by local choice (reason=3)
[ 5549.864676] cfg80211: Calling CRDA to update world regulatory domain
[ 5549.887935] cfg80211: World regulatory domain updated:
[ 5549.887946] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5549.887957] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5549.887966] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5549.887976] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5549.887985] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5549.887995] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5556.378529] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 5556.378543] PM: Basic memory bitmaps created
[ 5556.506054] Syncing filesystems ... done.
[ 5556.510035] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5556.524204] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 5556.543043] PM: Preallocating image memory... done (allocated 141753 pages)
[ 5556.939912] PM: Allocated 567012 kbytes in 0.39 seconds (1453.87 MB/s)
[ 5556.939918] Suspending console(s) (use no_console_suspend to debug)
[ 5556.941231] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 5556.942168] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 5556.942493] pci 0000:00:1f.3: PCI INT B disabled
[ 5556.942715] ata2: port disabled. ignoring.
[ 5556.942818] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 5557.044268] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 5557.257868] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 5557.257924] PM: freeze of devices complete after 317.589 msecs
[ 5557.258578] PM: late freeze of devices complete after 0.642 msecs
[ 5557.258627] ACPI: Preparing to enter system sleep state S4
[ 5557.349592] PM: Saving platform NVS memory
[ 5557.349822] Disabling non-boot CPUs ...
[ 5557.452120] CPU 1 is now offline
[ 5557.452131] SMP alternatives: switching to UP code
[ 5557.460420] Extended CMOS year: 2000
[ 5557.460531] PM: Creating hibernation image:
[ 5557.464018] PM: Need to copy 108385 pages
[ 5557.464018] PM: Normal pages needed: 94319 + 1024, available pages: 137209
[ 5557.464018] PM: Restoring platform NVS memory
[ 5557.464018] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 5557.464018] CPU0: Thermal monitoring handled by SMI
[ 5557.464018] Extended CMOS year: 2000
[ 5557.464018] Enabling non-boot CPUs ...
[ 5557.464018] SMP alternatives: switching to SMP code
[ 5557.467461] Booting Node 0 Processor 1 APIC 0x1
[ 5557.459118] Initializing CPU#1
[ 5557.459118] CPU1: Thermal monitoring handled by SMI
[ 5557.556783] NMI watchdog enabled, takes one hw-pmu counter.
[ 5557.561386] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 5557.564171] CPU1 is up
[ 5557.564344] ACPI: Waking up from system sleep state S4
[ 5557.652469] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 5557.652973] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 5557.653019] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 5557.653200] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 5557.653864] PM: early restore of devices complete after 1.539 msecs
[ 5557.724000] i915 0000:00:02.0: setting latency timer to 64
[ 5557.728678] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5557.728694] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5557.728764] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 5557.728837] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5557.728848] pci 0000:00:1c.0: setting latency timer to 64
[ 5557.728867] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 5557.728877] pci 0000:00:1c.1: setting latency timer to 64
[ 5557.728897] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5557.728907] pci 0000:00:1c.2: setting latency timer to 64
[ 5557.728924] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5557.728974] usb usb2: root hub lost power or was reset
[ 5557.728996] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5557.729043] usb usb3: root hub lost power or was reset
[ 5557.729063] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5557.729110] usb usb4: root hub lost power or was reset
[ 5557.729130] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5557.729177] usb usb5: root hub lost power or was reset
[ 5557.729199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5557.729238] usb usb1: root hub lost power or was reset
[ 5557.733127] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5557.733153] pci 0000:00:1e.0: setting latency timer to 64
[ 5557.733181] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5557.733192] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5557.733236] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5557.733247] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5557.733280] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5557.733501] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5557.734095] sd 2:0:0:0: [sda] Starting disk
[ 5557.737597] ata2: port disabled. ignoring.
[ 5557.957064] ata3.00: configured for UDMA/133
[ 5558.200128] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 5558.444147] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 5558.712158] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 5558.956141] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 5559.107899] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 5559.107914] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 5559.108494] PM: restore of devices complete after 1384.845 msecs
[ 5559.125252] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 5559.125454] Restarting tasks ... done.
[ 5559.225671] PM: Basic memory bitmaps freed
[ 5559.225690] video LNXVIDEO:00: Restoring backlight state
[ 5562.938488] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 5562.972832] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5580.188371] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 5585.638001] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5682.697604] usbcore: deregistering interface driver cdc_acm
[ 5682.778421] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 5682.780919] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 5682.783524] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 5682.785226] usbcore: registered new interface driver cdc_acm
[ 5682.785234] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5736.248193] usbcore: deregistering interface driver cdc_acm
[ 5736.318741] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 5736.320435] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 5736.324950] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 5736.325854] usbcore: registered new interface driver cdc_acm
[ 5736.325864] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5788.052270] usbcore: deregistering interface driver cdc_acm
[ 5788.123668] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 5788.126997] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 5788.128798] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 5788.133122] usbcore: registered new interface driver cdc_acm
[ 5788.133132] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8973.913253] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 8973.913268] PM: Basic memory bitmaps created
[ 8973.978612] Syncing filesystems ... done.
[ 8973.982426] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 8973.996450] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 8974.015231] PM: Preallocating image memory... done (allocated 141761 pages)
[ 8974.315311] PM: Allocated 567044 kbytes in 0.30 seconds (1890.14 MB/s)
[ 8974.315317] Suspending console(s) (use no_console_suspend to debug)
[ 8974.316986] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 8974.317923] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 8974.318050] pci 0000:00:1f.3: PCI INT B disabled
[ 8974.318338] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 8974.318396] ata2: port disabled. ignoring.
[ 8974.332231] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 8974.420279] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 8974.436207] PM: freeze of devices complete after 120.493 msecs
[ 8974.436913] PM: late freeze of devices complete after 0.689 msecs
[ 8974.436960] ACPI: Preparing to enter system sleep state S4
[ 8974.529630] PM: Saving platform NVS memory
[ 8974.529886] Disabling non-boot CPUs ...
[ 8974.632112] CPU 1 is now offline
[ 8974.632123] SMP alternatives: switching to UP code
[ 8974.640344] Extended CMOS year: 2000
[ 8974.640456] PM: Creating hibernation image:
[ 8974.644019] PM: Need to copy 113883 pages
[ 8974.644019] PM: Normal pages needed: 106972 + 1024, available pages: 138866
[ 8974.644019] PM: Restoring platform NVS memory
[ 8974.644019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 8974.644019] CPU0: Thermal monitoring handled by SMI
[ 8974.644019] Extended CMOS year: 2000
[ 8974.644019] Enabling non-boot CPUs ...
[ 8974.644019] SMP alternatives: switching to SMP code
[ 8974.647392] Booting Node 0 Processor 1 APIC 0x1
[ 8974.639109] Initializing CPU#1
[ 8974.639109] CPU1: Thermal monitoring handled by SMI
[ 8974.736721] NMI watchdog enabled, takes one hw-pmu counter.
[ 8974.741315] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 8974.744151] CPU1 is up
[ 8974.744327] ACPI: Waking up from system sleep state S4
[ 8974.832470] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 8974.832972] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 8974.833018] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 8974.833199] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 8974.833863] PM: early restore of devices complete after 1.539 msecs
[ 8974.908690] i915 0000:00:02.0: setting latency timer to 64
[ 8974.913378] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8974.913394] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8974.913466] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 8974.913538] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8974.913549] pci 0000:00:1c.0: setting latency timer to 64
[ 8974.913569] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 8974.913579] pci 0000:00:1c.1: setting latency timer to 64
[ 8974.913598] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8974.913608] pci 0000:00:1c.2: setting latency timer to 64
[ 8974.913625] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8974.913675] usb usb2: root hub lost power or was reset
[ 8974.913697] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8974.913744] usb usb3: root hub lost power or was reset
[ 8974.913764] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8974.913811] usb usb4: root hub lost power or was reset
[ 8974.913831] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 8974.913877] usb usb5: root hub lost power or was reset
[ 8974.913899] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8974.913939] usb usb1: root hub lost power or was reset
[ 8974.917831] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 8974.917857] pci 0000:00:1e.0: setting latency timer to 64
[ 8974.917885] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8974.917896] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 8974.917944] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8974.917955] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 8974.917987] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8974.918208] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8974.918308] ata2: port disabled. ignoring.
[ 8974.918925] sd 2:0:0:0: [sda] Starting disk
[ 8975.137275] ata3.00: configured for UDMA/133
[ 8975.384162] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 8975.652158] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 8975.802704] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 8975.802719] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 8975.896157] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 8976.140118] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 8976.279494] PM: restore of devices complete after 1371.159 msecs
[ 8976.296205] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 8976.296407] Restarting tasks ... done.
[ 8976.405475] PM: Basic memory bitmaps freed
[ 8976.405494] video LNXVIDEO:00: Restoring backlight state
[ 8979.142970] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 8979.176466] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9648.554505] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 9648.554519] PM: Basic memory bitmaps created
[ 9648.628361] Syncing filesystems ... done.
[ 9648.631146] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9648.648232] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9648.667147] PM: Preallocating image memory... done (allocated 141755 pages)
[ 9648.892259] PM: Allocated 567020 kbytes in 0.22 seconds (2577.36 MB/s)
[ 9648.892265] Suspending console(s) (use no_console_suspend to debug)
[ 9648.893067] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 9648.894058] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[ 9648.894405] pci 0000:00:1f.3: PCI INT B disabled
[ 9648.894634] ata2: port disabled. ignoring.
[ 9648.900095] ata_piix 0000:00:1f.1: PCI INT B disabled
[ 9649.133320] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 9650.000325] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 9650.016240] PM: freeze of devices complete after 1123.579 msecs
[ 9650.016933] PM: late freeze of devices complete after 0.678 msecs
[ 9650.016984] ACPI: Preparing to enter system sleep state S4
[ 9650.109655] PM: Saving platform NVS memory
[ 9650.109920] Disabling non-boot CPUs ...
[ 9650.212125] CPU 1 is now offline
[ 9650.212136] SMP alternatives: switching to UP code
[ 9650.220293] Extended CMOS year: 2000
[ 9650.220403] PM: Creating hibernation image:
[ 9650.224019] PM: Need to copy 113836 pages
[ 9650.224019] PM: Normal pages needed: 110771 + 1024, available pages: 142759
[ 9650.224019] PM: Restoring platform NVS memory
[ 9650.224019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 9650.224019] CPU0: Thermal monitoring handled by SMI
[ 9650.224019] Extended CMOS year: 2000
[ 9650.224019] Enabling non-boot CPUs ...
[ 9650.224019] SMP alternatives: switching to SMP code
[ 9650.227334] Booting Node 0 Processor 1 APIC 0x1
[ 9650.219111] Initializing CPU#1
[ 9650.219111] CPU1: Thermal monitoring handled by SMI
[ 9650.316713] NMI watchdog enabled, takes one hw-pmu counter.
[ 9650.321316] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 9650.324155] CPU1 is up
[ 9650.324328] ACPI: Waking up from system sleep state S4
[ 9650.412469] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 9650.412973] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[ 9650.413018] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[ 9650.413199] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[ 9650.413863] PM: early restore of devices complete after 1.539 msecs
[ 9650.487000] i915 0000:00:02.0: setting latency timer to 64
[ 9650.491507] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9650.491523] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9650.491594] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 9650.491668] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9650.491679] pci 0000:00:1c.0: setting latency timer to 64
[ 9650.491698] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 9650.491708] pci 0000:00:1c.1: setting latency timer to 64
[ 9650.491727] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9650.491738] pci 0000:00:1c.2: setting latency timer to 64
[ 9650.491754] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9650.491804] usb usb2: root hub lost power or was reset
[ 9650.491826] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 9650.491873] usb usb3: root hub lost power or was reset
[ 9650.491894] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9650.491941] usb usb4: root hub lost power or was reset
[ 9650.491961] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 9650.492011] usb usb5: root hub lost power or was reset
[ 9650.492065] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 9650.492105] usb usb1: root hub lost power or was reset
[ 9650.496027] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 9650.496052] pci 0000:00:1e.0: setting latency timer to 64
[ 9650.496081] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9650.496092] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 9650.496136] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9650.496147] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 9650.496179] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9650.496400] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9650.496968] sd 2:0:0:0: [sda] Starting disk
[ 9650.500173] ata2: port disabled. ignoring.
[ 9650.725181] ata3.00: configured for UDMA/133
[ 9650.964158] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 9651.232160] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[ 9651.476158] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[ 9651.720541] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[ 9651.871769] btusb 3-2:1.0: no reset_resume for driver btusb?
[ 9651.871784] btusb 3-2:1.1: no reset_resume for driver btusb?
[ 9651.872447] PM: restore of devices complete after 1385.810 msecs
[ 9651.888995] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 9651.889007] Restarting tasks ... done.
[ 9651.998400] PM: Basic memory bitmaps freed
[ 9651.998418] video LNXVIDEO:00: Restoring backlight state
[ 9653.227405] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 9653.261612] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9786.676161] usbcore: deregistering interface driver cdc_acm
[ 9786.742359] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 9786.744957] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 9786.749277] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 9786.750205] usbcore: registered new interface driver cdc_acm
[ 9786.750215] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[10167.987493] PM: Syncing filesystems ... done.
[10167.998137] PM: Preparing system for mem sleep
[10167.999000] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10168.012351] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[10168.028307] PM: Entering mem sleep
[10168.028339] Suspending console(s) (use no_console_suspend to debug)
[10168.029132] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10168.110729] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[10168.110966] pci 0000:00:1f.3: PCI INT B disabled
[10168.111700] ata_piix 0000:00:1f.1: PCI INT B disabled
[10168.131721] sd 2:0:0:0: [sda] Stopping disk
[10168.212232] HDA Intel 0000:00:1b.0: PCI INT A disabled
[10168.417787] ata_piix 0000:00:1f.2: PCI INT B disabled
[10168.432216] PM: suspend of devices complete after 403.547 msecs
[10168.448523] PM: late suspend of devices complete after 16.285 msecs
[10168.448555] ACPI: Preparing to enter system sleep state S3
[10168.541582] PM: Saving platform NVS memory
[10168.541848] Disabling non-boot CPUs ...
[10168.648118] CPU 1 is now offline
[10168.648129] SMP alternatives: switching to UP code
[10168.656235] Extended CMOS year: 2000
[10168.656235] Back to C!
[10168.656235] PM: Restoring platform NVS memory
[10168.656235] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[10168.656235] CPU0: Thermal monitoring handled by SMI
[10168.656235] Extended CMOS year: 2000
[10168.656235] Enabling non-boot CPUs ...
[10168.656235] SMP alternatives: switching to SMP code
[10168.663266] Booting Node 0 Processor 1 APIC 0x1
[10168.655102] Initializing CPU#1
[10168.752666] NMI watchdog enabled, takes one hw-pmu counter.
[10168.757266] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[10168.760157] CPU1 is up
[10168.760326] ACPI: Waking up from system sleep state S3
[10168.832447] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[10168.832485] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[10168.832537] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10168.832549] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[10168.832591] pci 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x40103)
[10168.832609] pci 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf001f001)
[10168.832619] pci 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
[10168.832629] pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
[10168.832639] pci 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
[10168.832652] pci 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10168.832663] pci 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[10168.832708] pci 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020b)
[10168.832726] pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf011f011)
[10168.832736] pci 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030)
[10168.832746] pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
[10168.832761] pci 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10168.832772] pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[10168.832817] pci 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40303)
[10168.832835] pci 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x40114001)
[10168.832845] pci 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040)
[10168.832855] pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[10168.832870] pci 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[10168.832881] pci 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[10168.833126] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[10168.833136] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[10168.833145] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[10168.833224] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[10168.833272] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[10168.833461] tg3 0000:02:00.0: restoring config space at offset 0xf (was 0x1ef, writing 0x10b)
[10168.833487] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[10168.833532] tg3 0000:02:00.0: restoring config space at offset 0x5 (was 0xfff3ffff, writing 0x0)
[10168.833549] tg3 0000:02:00.0: restoring config space at offset 0x4 (was 0xfffe0004, writing 0xf0200004)
[10168.833565] tg3 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10168.833586] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[10168.833923] b43-pci-bridge 0000:05:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
[10168.833989] b43-pci-bridge 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
[10168.834005] b43-pci-bridge 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[10168.834027] b43-pci-bridge 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[10168.834253] PM: early resume of devices complete after 1.899 msecs
[10168.834955] i915 0000:00:02.0: setting latency timer to 64
[10168.837047] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[10168.837063] HDA Intel 0000:00:1b.0: setting latency timer to 64
[10168.837135] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[10168.837205] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[10168.837216] pci 0000:00:1c.0: setting latency timer to 64
[10168.837236] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[10168.837247] pci 0000:00:1c.1: setting latency timer to 64
[10168.837267] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[10168.837277] pci 0000:00:1c.2: setting latency timer to 64
[10168.837295] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[10168.837331] usb usb2: root hub lost power or was reset
[10168.837354] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[10168.837388] usb usb3: root hub lost power or was reset
[10168.837410] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[10168.837443] usb usb4: root hub lost power or was reset
[10168.837464] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[10168.837497] usb usb5: root hub lost power or was reset
[10168.837521] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[10168.837625] pci 0000:00:1e.0: setting latency timer to 64
[10168.837653] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[10168.837664] ata_piix 0000:00:1f.1: setting latency timer to 64
[10168.837710] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[10168.837721] ata_piix 0000:00:1f.2: setting latency timer to 64
[10168.837758] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[10168.837815] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[10168.838023] ata2: port disabled. ignoring.
[10168.840391] sd 2:0:0:0: [sda] Starting disk
[10169.200166] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[10169.468155] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[10169.712149] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[10169.867148] btusb 3-2:1.0: no reset_resume for driver btusb?
[10169.867164] btusb 3-2:1.1: no reset_resume for driver btusb?
[10170.865316] ata3.00: configured for UDMA/133
[10170.868350] PM: resume of devices complete after 2033.991 msecs
[10170.869390] PM: Finishing wakeup.
[10170.869396] Restarting tasks ...
[10170.870450] usb 1-7: USB disconnect, address 5
[10170.871598] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, f51bf000/351bf000 (bad dma)
[10170.871835] ehci_hcd 0000:00:1d.7: dma_pool_free buffer-2048, f51bf080/351bf080 (bad dma)
[10170.871957] cdc_ether 1-7:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-7, Mobile Broadband Network Device
[10170.903663] done.
[10170.903690] video LNXVIDEO:00: Restoring backlight state
[10171.208154] usb 1-7: new high speed USB device using ehci_hcd and address 6
[10171.343517] usb 1-7: New USB device found, idVendor=0bdb, idProduct=1900
[10171.343530] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10171.343540] usb 1-7: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[10171.343548] usb 1-7: Manufacturer: Ericsson
[10171.343555] usb 1-7: SerialNumber: 0115650004270950
[10171.352257] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[10171.354643] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[10171.357008] cdc_wdm 1-7:1.5: cdc-wdm0: USB WDM device
[10171.358720] cdc_wdm 1-7:1.6: cdc-wdm1: USB WDM device
[10171.363473] cdc_ether 1-7:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-7, Mobile Broadband Network Device, 02:80:37:ec:02:00
[10171.365065] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[10172.152820] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[10172.200970] ADDRCONF(NETDEV_UP): eth0: link is not ready
[10216.048368] usbcore: deregistering interface driver cdc_acm
[10216.118766] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[10216.120998] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[10216.123764] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[10216.128458] usbcore: registered new interface driver cdc_acm
[10216.128468] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[10255.944567] usbcore: deregistering interface driver cdc_acm
[10256.012542] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[10256.014443] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[10256.019612] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[10256.021630] usbcore: registered new interface driver cdc_acm
[10256.021640] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[11303.127484] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[11303.127498] PM: Basic memory bitmaps created
[11303.204756] Syncing filesystems ... done.
[11303.207377] Freezing user space processes ... (elapsed 0.01 seconds) done.
[11303.224208] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[11303.242919] PM: Preallocating image memory... done (allocated 141759 pages)
[11303.502556] PM: Allocated 567036 kbytes in 0.25 seconds (2268.14 MB/s)
[11303.502562] Suspending console(s) (use no_console_suspend to debug)
[11303.504567] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[11303.505564] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[11303.505922] pci 0000:00:1f.3: PCI INT B disabled
[11303.506150] ata2: port disabled. ignoring.
[11303.506256] ata_piix 0000:00:1f.1: PCI INT B disabled
[11303.608639] HDA Intel 0000:00:1b.0: PCI INT A disabled
[11303.916104] ata_piix 0000:00:1f.2: PCI INT B disabled
[11303.916147] PM: freeze of devices complete after 413.188 msecs
[11303.916837] PM: late freeze of devices complete after 0.677 msecs
[11303.916889] ACPI: Preparing to enter system sleep state S4
[11304.009801] PM: Saving platform NVS memory
[11304.010115] Disabling non-boot CPUs ...
[11304.112203] CPU 1 is now offline
[11304.112214] SMP alternatives: switching to UP code
[11304.120535] Extended CMOS year: 2000
[11304.120652] PM: Creating hibernation image:
[11304.124019] PM: Need to copy 113911 pages
[11304.124019] PM: Normal pages needed: 109366 + 1024, available pages: 141204
[11304.124019] PM: Restoring platform NVS memory
[11304.124019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[11304.124019] CPU0: Thermal monitoring handled by SMI
[11304.124019] Extended CMOS year: 2000
[11304.124019] Enabling non-boot CPUs ...
[11304.124019] SMP alternatives: switching to SMP code
[11304.127619] Booting Node 0 Processor 1 APIC 0x1
[11304.119294] Initializing CPU#1
[11304.119294] CPU1: Thermal monitoring handled by SMI
[11304.216790] NMI watchdog enabled, takes one hw-pmu counter.
[11304.221390] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[11304.224168] CPU1 is up
[11304.224338] ACPI: Waking up from system sleep state S4
[11304.316470] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[11304.316527] pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0x2020, writing 0x20002020)
[11304.316593] pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0x3030, writing 0x20003030)
[11304.316659] pci 0000:00:1c.2: restoring config space at offset 0x7 (was 0x4040, writing 0x20004040)
[11304.316998] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[11304.317043] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[11304.317223] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[11304.317892] PM: early restore of devices complete after 1.567 msecs
[11304.391204] i915 0000:00:02.0: setting latency timer to 64
[11304.395809] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[11304.395825] HDA Intel 0000:00:1b.0: setting latency timer to 64
[11304.395896] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[11304.395968] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[11304.395979] pci 0000:00:1c.0: setting latency timer to 64
[11304.395998] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[11304.396048] pci 0000:00:1c.1: setting latency timer to 64
[11304.396070] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[11304.396080] pci 0000:00:1c.2: setting latency timer to 64
[11304.396098] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[11304.396148] usb usb2: root hub lost power or was reset
[11304.396170] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[11304.396217] usb usb3: root hub lost power or was reset
[11304.396237] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[11304.396284] usb usb4: root hub lost power or was reset
[11304.396303] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[11304.396350] usb usb5: root hub lost power or was reset
[11304.396372] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[11304.396411] usb usb1: root hub lost power or was reset
[11304.400311] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[11304.400337] pci 0000:00:1e.0: setting latency timer to 64
[11304.400366] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[11304.400376] ata_piix 0000:00:1f.1: setting latency timer to 64
[11304.400421] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[11304.400432] ata_piix 0000:00:1f.2: setting latency timer to 64
[11304.400464] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[11304.400685] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[11304.401275] sd 2:0:0:0: [sda] Starting disk
[11304.404493] ata2: port disabled. ignoring.
[11304.624743] ata3.00: configured for UDMA/133
[11304.868157] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[11305.136154] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[11305.290097] btusb 3-2:1.0: no reset_resume for driver btusb?
[11305.290112] btusb 3-2:1.1: no reset_resume for driver btusb?
[11305.388158] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[11305.632102] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[11305.769775] PM: restore of devices complete after 1378.924 msecs
[11305.786125] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[11305.786139] Restarting tasks ... done.
[11305.878418] PM: Basic memory bitmaps freed
[11305.878435] video LNXVIDEO:00: Restoring backlight state
[11307.386478] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[11307.432843] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15108.518246] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[15108.518263] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[15108.519216] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[15118.536046] eth0: no IPv6 routers present
[15176.600858] tg3 0000:02:00.0: eth0: Link is down
[15181.252417] tg3 0000:02:00.0: PME# enabled
[15181.288164] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[15183.421597] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[15183.421611] PM: Basic memory bitmaps created
[15183.501651] Syncing filesystems ... done.
[15183.508975] Freezing user space processes ... (elapsed 0.01 seconds) done.
[15183.524255] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[15183.543189] PM: Preallocating image memory... done (allocated 141753 pages)
[15183.900535] PM: Allocated 567012 kbytes in 0.35 seconds (1620.03 MB/s)
[15183.900541] Suspending console(s) (use no_console_suspend to debug)
[15183.901443] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[15183.902766] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[15183.903089] pci 0000:00:1f.3: PCI INT B disabled
[15183.903316] ata2: port disabled. ignoring.
[15183.903420] ata_piix 0000:00:1f.1: PCI INT B disabled
[15184.008372] HDA Intel 0000:00:1b.0: PCI INT A disabled
[15184.009939] ata_piix 0000:00:1f.2: PCI INT B disabled
[15184.024243] PM: freeze of devices complete after 123.306 msecs
[15184.024940] PM: late freeze of devices complete after 0.680 msecs
[15184.024987] ACPI: Preparing to enter system sleep state S4
[15184.117586] PM: Saving platform NVS memory
[15184.117864] Disabling non-boot CPUs ...
[15184.220099] CPU 1 is now offline
[15184.220110] SMP alternatives: switching to UP code
[15184.228292] Extended CMOS year: 2000
[15184.228403] PM: Creating hibernation image:
[15184.232018] PM: Need to copy 113859 pages
[15184.232018] PM: Normal pages needed: 103802 + 1024, available pages: 135744
[15184.232018] PM: Restoring platform NVS memory
[15184.232018] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[15184.232018] CPU0: Thermal monitoring handled by SMI
[15184.232018] Extended CMOS year: 2000
[15184.232018] Enabling non-boot CPUs ...
[15184.232018] SMP alternatives: switching to SMP code
[15184.235336] Booting Node 0 Processor 1 APIC 0x1
[15184.227119] Initializing CPU#1
[15184.227119] CPU1: Thermal monitoring handled by SMI
[15184.324763] NMI watchdog enabled, takes one hw-pmu counter.
[15184.329366] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[15184.332157] CPU1 is up
[15184.332331] ACPI: Waking up from system sleep state S4
[15184.420481] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[15184.420985] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[15184.421030] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[15184.421211] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[15184.421880] PM: early restore of devices complete after 1.546 msecs
[15184.495331] i915 0000:00:02.0: setting latency timer to 64
[15184.499670] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[15184.499687] HDA Intel 0000:00:1b.0: setting latency timer to 64
[15184.499757] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[15184.499831] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[15184.499842] pci 0000:00:1c.0: setting latency timer to 64
[15184.499862] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[15184.499872] pci 0000:00:1c.1: setting latency timer to 64
[15184.499891] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[15184.499901] pci 0000:00:1c.2: setting latency timer to 64
[15184.499918] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[15184.499968] usb usb2: root hub lost power or was reset
[15184.499990] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[15184.500078] usb usb3: root hub lost power or was reset
[15184.500100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[15184.500147] usb usb4: root hub lost power or was reset
[15184.500167] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[15184.500214] usb usb5: root hub lost power or was reset
[15184.500236] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[15184.500275] usb usb1: root hub lost power or was reset
[15184.504161] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[15184.504187] pci 0000:00:1e.0: setting latency timer to 64
[15184.504215] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15184.504226] ata_piix 0000:00:1f.1: setting latency timer to 64
[15184.504272] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15184.504283] ata_piix 0000:00:1f.2: setting latency timer to 64
[15184.504315] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15184.504537] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[15184.506271] ata2: port disabled. ignoring.
[15184.506830] sd 2:0:0:0: [sda] Starting disk
[15184.728727] ata3.00: configured for UDMA/133
[15184.972165] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[15185.240139] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[15185.484160] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[15185.728129] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[15185.883614] btusb 3-2:1.0: no reset_resume for driver btusb?
[15185.883629] btusb 3-2:1.1: no reset_resume for driver btusb?
[15185.884240] PM: restore of devices complete after 1389.402 msecs
[15185.901014] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[15185.901028] Restarting tasks ... done.
[15185.978664] PM: Basic memory bitmaps freed
[15185.978680] video LNXVIDEO:00: Restoring backlight state
[15189.309386] tg3 0000:02:00.0: wake-up capability disabled by ACPI
[15189.309446] tg3 0000:02:00.0: PME# disabled
[15189.309673] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[15189.344602] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15200.876157] usbcore: deregistering interface driver cdc_acm
[15200.941579] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15200.943936] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15200.948861] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15200.949662] usbcore: registered new interface driver cdc_acm
[15200.949672] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[15227.636112] usbcore: deregistering interface driver cdc_acm
[15227.695975] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15227.697956] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15227.699128] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15227.700113] usbcore: registered new interface driver cdc_acm
[15227.700124] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[15292.559303] usbcore: deregistering interface driver cdc_acm
[15292.618817] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15292.621012] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15292.622058] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15292.622664] usbcore: registered new interface driver cdc_acm
[15292.622673] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[15511.307018] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[15511.307032] PM: Basic memory bitmaps created
[15511.377796] Syncing filesystems ... done.
[15511.388904] Freezing user space processes ... (elapsed 0.01 seconds) done.
[15511.404279] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[15511.423029] PM: Preallocating image memory... done (allocated 141753 pages)
[15512.057979] PM: Allocated 567012 kbytes in 0.63 seconds (900.01 MB/s)
[15512.057985] Suspending console(s) (use no_console_suspend to debug)
[15512.059962] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[15512.060373] pci 0000:00:1f.3: PCI INT B disabled
[15512.060585] ata2: port disabled. ignoring.
[15512.061407] ata_piix 0000:00:1f.1: PCI INT B disabled
[15512.164271] HDA Intel 0000:00:1b.0: PCI INT A disabled
[15512.260136] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[15512.260845] ata_piix 0000:00:1f.2: PCI INT B disabled
[15512.260914] PM: freeze of devices complete after 202.556 msecs
[15512.261611] PM: late freeze of devices complete after 0.676 msecs
[15512.261652] ACPI: Preparing to enter system sleep state S4
[15512.353617] PM: Saving platform NVS memory
[15512.353920] Disabling non-boot CPUs ...
[15512.456102] CPU 1 is now offline
[15512.456113] SMP alternatives: switching to UP code
[15512.464389] Extended CMOS year: 2000
[15512.464500] PM: Creating hibernation image:
[15512.468019] PM: Need to copy 110125 pages
[15512.468019] PM: Normal pages needed: 94483 + 1024, available pages: 133893
[15512.468019] PM: Restoring platform NVS memory
[15512.468019] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[15512.468019] CPU0: Thermal monitoring handled by SMI
[15512.468019] Extended CMOS year: 2000
[15512.468019] Enabling non-boot CPUs ...
[15512.468019] SMP alternatives: switching to SMP code
[15512.473437] Booting Node 0 Processor 1 APIC 0x1
[15512.463201] Initializing CPU#1
[15512.463201] CPU1: Thermal monitoring handled by SMI
[15512.564745] NMI watchdog enabled, takes one hw-pmu counter.
[15512.569327] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[15512.572164] CPU1 is up
[15512.572342] ACPI: Waking up from system sleep state S4
[15512.660477] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[15512.660979] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[15512.661025] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[15512.661206] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[15512.661875] PM: early restore of devices complete after 1.542 msecs
[15512.733342] i915 0000:00:02.0: setting latency timer to 64
[15512.737192] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[15512.737208] HDA Intel 0000:00:1b.0: setting latency timer to 64
[15512.737279] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[15512.737352] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[15512.737363] pci 0000:00:1c.0: setting latency timer to 64
[15512.737383] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[15512.737394] pci 0000:00:1c.1: setting latency timer to 64
[15512.737412] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[15512.737422] pci 0000:00:1c.2: setting latency timer to 64
[15512.737439] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[15512.737489] usb usb2: root hub lost power or was reset
[15512.737511] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[15512.737558] usb usb3: root hub lost power or was reset
[15512.737578] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[15512.737625] usb usb4: root hub lost power or was reset
[15512.737646] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[15512.737692] usb usb5: root hub lost power or was reset
[15512.737715] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[15512.737755] usb usb1: root hub lost power or was reset
[15512.741659] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[15512.741685] pci 0000:00:1e.0: setting latency timer to 64
[15512.741716] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15512.741726] ata_piix 0000:00:1f.1: setting latency timer to 64
[15512.741772] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15512.741783] ata_piix 0000:00:1f.2: setting latency timer to 64
[15512.741815] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15512.742036] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[15512.742630] sd 2:0:0:0: [sda] Starting disk
[15512.745815] ata2: port disabled. ignoring.
[15512.953338] ata3.00: configured for UDMA/133
[15513.208164] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[15513.476125] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[15513.627453] btusb 3-2:1.0: no reset_resume for driver btusb?
[15513.627468] btusb 3-2:1.1: no reset_resume for driver btusb?
[15513.720157] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[15513.964157] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[15514.103526] PM: restore of devices complete after 1370.507 msecs
[15514.120143] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[15514.120154] Restarting tasks ... done.
[15514.181622] PM: Basic memory bitmaps freed
[15514.181638] video LNXVIDEO:00: Restoring backlight state
[15522.573749] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[15522.607754] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15903.739937] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[15903.739951] PM: Basic memory bitmaps created
[15903.798587] Syncing filesystems ... done.
[15903.799898] Freezing user space processes ... (elapsed 0.01 seconds) done.
[15903.816266] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[15903.835347] PM: Preallocating image memory... done (allocated 141755 pages)
[15904.084170] PM: Allocated 567020 kbytes in 0.24 seconds (2362.58 MB/s)
[15904.084176] Suspending console(s) (use no_console_suspend to debug)
[15904.085337] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[15904.086240] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[15904.086466] pci 0000:00:1f.3: PCI INT B disabled
[15904.086638] ata2: port disabled. ignoring.
[15904.086702] ata_piix 0000:00:1f.2: PCI INT B disabled
[15904.086727] ata_piix 0000:00:1f.1: PCI INT B disabled
[15904.188253] HDA Intel 0000:00:1b.0: PCI INT A disabled
[15904.204238] PM: freeze of devices complete after 119.670 msecs
[15904.204931] PM: late freeze of devices complete after 0.677 msecs
[15904.204978] ACPI: Preparing to enter system sleep state S4
[15904.297600] PM: Saving platform NVS memory
[15904.297897] Disabling non-boot CPUs ...
[15904.400115] CPU 1 is now offline
[15904.400126] SMP alternatives: switching to UP code
[15904.408386] Extended CMOS year: 2000
[15904.408497] PM: Creating hibernation image:
[15904.412018] PM: Need to copy 113853 pages
[15904.412018] PM: Normal pages needed: 109049 + 1024, available pages: 141003
[15904.412018] PM: Restoring platform NVS memory
[15904.412018] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[15904.412018] CPU0: Thermal monitoring handled by SMI
[15904.412018] Extended CMOS year: 2000
[15904.412018] Enabling non-boot CPUs ...
[15904.412018] SMP alternatives: switching to SMP code
[15904.415429] Booting Node 0 Processor 1 APIC 0x1
[15904.407130] Initializing CPU#1
[15904.407130] CPU1: Thermal monitoring handled by SMI
[15904.504776] NMI watchdog enabled, takes one hw-pmu counter.
[15904.509367] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[15904.512167] CPU1 is up
[15904.512340] ACPI: Waking up from system sleep state S4
[15904.604468] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[15904.604970] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[15904.605015] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[15904.605196] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[15904.605864] PM: early restore of devices complete after 1.540 msecs
[15904.679427] i915 0000:00:02.0: setting latency timer to 64
[15904.683322] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[15904.683339] HDA Intel 0000:00:1b.0: setting latency timer to 64
[15904.683409] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[15904.683482] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[15904.683493] pci 0000:00:1c.0: setting latency timer to 64
[15904.683513] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[15904.683523] pci 0000:00:1c.1: setting latency timer to 64
[15904.683542] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[15904.683552] pci 0000:00:1c.2: setting latency timer to 64
[15904.683570] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[15904.683619] usb usb2: root hub lost power or was reset
[15904.683641] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[15904.683688] usb usb3: root hub lost power or was reset
[15904.683709] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[15904.683756] usb usb4: root hub lost power or was reset
[15904.683776] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[15904.683822] usb usb5: root hub lost power or was reset
[15904.683845] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[15904.683884] usb usb1: root hub lost power or was reset
[15904.687780] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[15904.687806] pci 0000:00:1e.0: setting latency timer to 64
[15904.687835] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15904.687845] ata_piix 0000:00:1f.1: setting latency timer to 64
[15904.687893] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15904.687904] ata_piix 0000:00:1f.2: setting latency timer to 64
[15904.687939] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[15904.688188] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[15904.689918] ata2: port disabled. ignoring.
[15904.690658] sd 2:0:0:0: [sda] Starting disk
[15904.917354] ata3.00: configured for UDMA/133
[15905.156156] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[15905.424157] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[15905.575465] btusb 3-2:1.0: no reset_resume for driver btusb?
[15905.575480] btusb 3-2:1.1: no reset_resume for driver btusb?
[15905.668158] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[15905.912284] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[15906.052173] PM: restore of devices complete after 1373.213 msecs
[15906.068584] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[15906.068597] Restarting tasks ... done.
[15906.181532] PM: Basic memory bitmaps freed
[15906.181550] video LNXVIDEO:00: Restoring backlight state
[15908.476321] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[15908.524801] ADDRCONF(NETDEV_UP): eth0: link is not ready
[15923.293573] usbcore: deregistering interface driver cdc_acm
[15923.423408] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15923.425494] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15923.426449] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15923.428415] usbcore: registered new interface driver cdc_acm
[15923.428425] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[15955.979795] usbcore: deregistering interface driver cdc_acm
[15956.047827] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[15956.049337] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[15956.050469] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[15956.051344] usbcore: registered new interface driver cdc_acm
[15956.051353] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[16104.792127] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[16104.792141] PM: Basic memory bitmaps created
[16104.871311] Syncing filesystems ... done.
[16104.872899] Freezing user space processes ... (elapsed 0.01 seconds) done.
[16104.888274] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[16104.907129] PM: Preallocating image memory... done (allocated 141761 pages)
[16105.164222] PM: Allocated 567044 kbytes in 0.25 seconds (2268.17 MB/s)
[16105.164228] Suspending console(s) (use no_console_suspend to debug)
[16105.164990] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[16105.165891] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[16105.166758] pci 0000:00:1f.3: PCI INT B disabled
[16105.167527] ata2: port disabled. ignoring.
[16105.167620] ata_piix 0000:00:1f.1: PCI INT B disabled
[16105.268256] HDA Intel 0000:00:1b.0: PCI INT A disabled
[16105.819380] ata_piix 0000:00:1f.2: PCI INT B disabled
[16105.819436] PM: freeze of devices complete after 654.824 msecs
[16105.820125] PM: late freeze of devices complete after 0.678 msecs
[16105.820174] ACPI: Preparing to enter system sleep state S4
[16105.913651] PM: Saving platform NVS memory
[16105.913965] Disabling non-boot CPUs ...
[16106.016278] CPU 1 is now offline
[16106.016288] SMP alternatives: switching to UP code
[16106.024425] Extended CMOS year: 2000
[16106.024536] PM: Creating hibernation image:
[16106.028017] PM: Need to copy 113866 pages
[16106.028017] PM: Normal pages needed: 106818 + 1024, available pages: 138746
[16106.028017] PM: Restoring platform NVS memory
[16106.028017] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[16106.028017] CPU0: Thermal monitoring handled by SMI
[16106.028017] Extended CMOS year: 2000
[16106.028017] Enabling non-boot CPUs ...
[16106.028017] SMP alternatives: switching to SMP code
[16106.031699] Booting Node 0 Processor 1 APIC 0x1
[16106.023249] Initializing CPU#1
[16106.023249] CPU1: Thermal monitoring handled by SMI
[16106.120802] NMI watchdog enabled, takes one hw-pmu counter.
[16106.125406] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[16106.128169] CPU1 is up
[16106.128342] ACPI: Waking up from system sleep state S4
[16106.216472] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[16106.216974] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[16106.217019] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[16106.217199] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfeff0000)
[16106.217867] PM: early restore of devices complete after 1.541 msecs
[16106.291333] i915 0000:00:02.0: setting latency timer to 64
[16106.295881] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[16106.295897] HDA Intel 0000:00:1b.0: setting latency timer to 64
[16106.295968] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[16106.296084] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[16106.296094] pci 0000:00:1c.0: setting latency timer to 64
[16106.296114] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[16106.296124] pci 0000:00:1c.1: setting latency timer to 64
[16106.296143] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[16106.296154] pci 0000:00:1c.2: setting latency timer to 64
[16106.296170] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[16106.296220] usb usb2: root hub lost power or was reset
[16106.296242] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[16106.296289] usb usb3: root hub lost power or was reset
[16106.296310] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[16106.296356] usb usb4: root hub lost power or was reset
[16106.296376] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[16106.296423] usb usb5: root hub lost power or was reset
[16106.296444] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[16106.296484] usb usb1: root hub lost power or was reset
[16106.300390] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[16106.300415] pci 0000:00:1e.0: setting latency timer to 64
[16106.300444] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[16106.300455] ata_piix 0000:00:1f.1: setting latency timer to 64
[16106.300500] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[16106.300510] ata_piix 0000:00:1f.2: setting latency timer to 64
[16106.300543] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[16106.300764] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[16106.301162] sd 2:0:0:0: [sda] Starting disk
[16106.303158] ata2: port disabled. ignoring.
[16106.516859] ata3.00: configured for UDMA/133
[16106.768128] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[16107.036160] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[16107.190164] btusb 3-2:1.0: no reset_resume for driver btusb?
[16107.190179] btusb 3-2:1.1: no reset_resume for driver btusb?
[16107.288155] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[16107.532152] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[16107.671256] PM: restore of devices complete after 1380.259 msecs
[16107.688047] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[16107.688057] Restarting tasks ... done.
[16107.834945] PM: Basic memory bitmaps freed
[16107.834960] video LNXVIDEO:00: Restoring backlight state
[16111.042374] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[16111.088875] ADDRCONF(NETDEV_UP): eth0: link is not ready
[16117.020214] usbcore: deregistering interface driver cdc_acm
[16117.082729] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[16117.084236] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[16117.085743] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[16117.086684] usbcore: registered new interface driver cdc_acm
[16117.086694] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[18335.252181] usbcore: deregistering interface driver cdc_acm
[18335.312088] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[18335.313519] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[18335.314650] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[18335.315287] usbcore: registered new interface driver cdc_acm
[18335.315297] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[18452.731604] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[18452.731617] PM: Basic memory bitmaps created
[18452.828766] Syncing filesystems ... done.
[18452.830448] Freezing user space processes ... (elapsed 0.01 seconds) done.
[18452.844260] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[18452.863128] PM: Preallocating image memory... done (allocated 141765 pages)
[18453.179081] PM: Allocated 567060 kbytes in 0.31 seconds (1829.22 MB/s)
[18453.179086] Suspending console(s) (use no_console_suspend to debug)
[18453.179917] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[18453.180883] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
[18453.181239] pci 0000:00:1f.3: PCI INT B disabled
[18453.181467] ata2: port disabled. ignoring.
[18453.182187] ata_piix 0000:00:1f.1: PCI INT B disabled
[18453.284279] HDA Intel 0000:00:1b.0: PCI INT A disabled
[18453.371876] ata_piix 0000:00:1f.2: PCI INT B disabled
[18453.371929] PM: freeze of devices complete after 192.466 msecs
[18453.372637] PM: late freeze of devices complete after 0.697 msecs
[18453.372686] ACPI: Preparing to enter system sleep state S4
[18453.465628] PM: Saving platform NVS memory
[18453.465947] Disabling non-boot CPUs ...
[18453.568105] CPU 1 is now offline
[18453.568116] SMP alternatives: switching to UP code
[18453.576412] Extended CMOS year: 2000
[18453.576523] PM: Creating hibernation image:
[18453.580018] PM: Need to copy 113766 pages
[18453.580018] PM: Normal pages needed: 104511 + 1024, available pages: 136639
[18453.580018] PM: Restoring platform NVS memory
[18453.580018] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[18453.580018] CPU0: Thermal monitoring handled by SMI
[18453.580018] Extended CMOS year: 2000
[18453.580018] Enabling non-boot CPUs ...
[18453.580018] SMP alternatives: switching to SMP code
[18453.583455] Booting Node 0 Processor 1 APIC 0x1
[18453.575163] Initializing CPU#1
[18453.575163] CPU1: Thermal monitoring handled by SMI
[18453.672755] NMI watchdog enabled, takes one hw-pmu counter.
[18453.677353] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[18453.680146] CPU1 is up
[18453.680322] ACPI: Waking up from system sleep state S4
[18453.768473] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[18453.768976] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[18453.769022] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[18453.769202] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[18453.769874] PM: early restore of devices complete after 1.545 msecs
[18453.843256] i915 0000:00:02.0: setting latency timer to 64
[18453.847601] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[18453.847617] HDA Intel 0000:00:1b.0: setting latency timer to 64
[18453.847688] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[18453.847760] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[18453.847771] pci 0000:00:1c.0: setting latency timer to 64
[18453.847791] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[18453.847801] pci 0000:00:1c.1: setting latency timer to 64
[18453.847820] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[18453.847831] pci 0000:00:1c.2: setting latency timer to 64
[18453.847847] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[18453.847897] usb usb2: root hub lost power or was reset
[18453.847920] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[18453.847967] usb usb3: root hub lost power or was reset
[18453.847988] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[18453.848019] usb usb4: root hub lost power or was reset
[18453.848085] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[18453.848133] usb usb5: root hub lost power or was reset
[18453.848156] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[18453.848195] usb usb1: root hub lost power or was reset
[18453.852089] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[18453.852115] pci 0000:00:1e.0: setting latency timer to 64
[18453.852144] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[18453.852155] ata_piix 0000:00:1f.1: setting latency timer to 64
[18453.852199] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[18453.852210] ata_piix 0000:00:1f.2: setting latency timer to 64
[18453.852244] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[18453.852465] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[18453.853049] sd 2:0:0:0: [sda] Starting disk
[18453.856233] ata2: port disabled. ignoring.
[18454.080657] ata3.00: configured for UDMA/133
[18454.320162] usb 1-5: reset high speed USB device using ehci_hcd and address 4
[18454.564162] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[18454.832163] usb 1-7: reset high speed USB device using ehci_hcd and address 6
[18455.076136] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[18455.228749] btusb 3-2:1.0: no reset_resume for driver btusb?
[18455.228758] btusb 3-2:1.1: no reset_resume for driver btusb?
[18455.229252] PM: restore of devices complete after 1386.364 msecs
[18455.246534] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[18455.246547] Restarting tasks ... done.
[18455.322673] PM: Basic memory bitmaps freed
[18455.322692] video LNXVIDEO:00: Restoring backlight state
[18458.701580] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[18458.735201] ADDRCONF(NETDEV_UP): eth0: link is not ready
[18486.776756] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[18486.776773] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[18486.777727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[18491.612264] usbcore: deregistering interface driver cdc_acm
[18491.676237] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[18491.677515] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[18491.684815] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[18491.687515] usbcore: registered new interface driver cdc_acm
[18491.687525] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[18496.928074] eth0: no IPv6 routers present
[19131.171479] ssh[18954]: segfault at 18f ip b754b3c0 sp bfd53570 error 4 in libcrypto.so.1.0.0[b74d8000+18a000]
[19134.928546] ssh[18960]: segfault at 18f ip b75933c0 sp bf9d5220 error 4 in libcrypto.so.1.0.0[b7520000+18a000]
[19147.885766] ssh[18966]: segfault at 18f ip b76993c0 sp bf995ff0 error 4 in libcrypto.so.1.0.0[b7626000+18a000]
[19152.380887] ssh[18969]: segfault at 18f ip b75863c0 sp bf9017f0 error 4 in libcrypto.so.1.0.0[b7513000+18a000]
[19219.360255] ssh[18989]: segfault at 18f ip b769a3c0 sp bf857950 error 4 in libcrypto.so.1.0.0[b7627000+18a000]
[-- Attachment #3: dmesg_good.txt --]
[-- Type: text/plain, Size: 53704 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.4-17-vanilla (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP 2011-03-15 00:05:21 +0100
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: LENOVO 4329A11 /Kuril , BIOS 14CN88WW 03/20/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7b70] f7b70
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ b1f000-c00000
[ 0.000000] RAMDISK: 37580000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36b10000 - 3757f5fd
[ 0.000000] Move RAMDISK from 0000000037580000 - 0000000037fef5fc to 36b10000 - 3757f5fc
[ 0.000000] ACPI: RSDP 000f7a60 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f6da15b 0007C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3f6e1d4d 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f6db355 06984 (v01 INTEL CALISTGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 3f6e2fc0 00040
[ 0.000000] ACPI: HPET 3f6e1e41 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f6e1e79 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 3f6e1eb5 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 3f6e1ee7 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 3f6e1f0d 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f6e1f75 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: ASF! 3f6e1f9d 00063 (v16 CETP CETP 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 3f6da773 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da6cd 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da1d7 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259679
[ 0.000000] free_area_init_node: node 0, pgdat c07d0700, node_mem_map f6320200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32212 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f77df000 s27200 r0 d21952 u49152
[ 0.000000] pcpu-alloc: s27200 r0 d21952 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257649
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part1 resume=/dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part2 splash=silent quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5195520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[ 0.000000] Memory: 1005564k/1039168k available (4024k kernel code, 33152k reserved, 1987k data, 428k init, 129864k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07e0000 - 0xc084b000 ( 428 kB)
[ 0.000000] .data : 0xc05ee0dc - 0xc07df028 (1987 kB)
[ 0.000000] .text : 0xc0200000 - 0xc05ee0dc (4024 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.038 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.07 BogoMIPS (lpj=6384152)
[ 0.004021] pid_max: default: 32768 minimum: 301
[ 0.004109] Security Framework initialized
[ 0.004134] AppArmor: AppArmor initialized
[ 0.004257] Mount-cache hash table entries: 512
[ 0.004472] Initializing cgroup subsys ns
[ 0.004482] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004488] Initializing cgroup subsys cpuacct
[ 0.004497] Initializing cgroup subsys memory
[ 0.004513] Initializing cgroup subsys devices
[ 0.004518] Initializing cgroup subsys freezer
[ 0.004523] Initializing cgroup subsys net_cls
[ 0.004527] Initializing cgroup subsys blkio
[ 0.004583] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004592] CPU: Physical Processor ID: 0
[ 0.004596] CPU: Processor Core ID: 0
[ 0.004601] mce: CPU supports 5 MCE banks
[ 0.004614] CPU0: Thermal monitoring enabled (TM1)
[ 0.004621] using mwait in idle threads.
[ 0.004634] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.004649] ... version: 3
[ 0.004653] ... bit width: 40
[ 0.004656] ... generic registers: 2
[ 0.004661] ... value mask: 000000ffffffffff
[ 0.004665] ... max period: 000000007fffffff
[ 0.004669] ... fixed-purpose events: 3
[ 0.004673] ... event mask: 0000000700000003
[ 0.008122] ACPI: Core revision 20101013
[ 0.024120] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064547] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.068000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068000] CPU 1 irqstacks, hard=f58cc000 soft=f58ce000
[ 0.068000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.160056] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160139] Brought up 2 CPUs
[ 0.160147] Total of 2 processors activated (6384.00 BogoMIPS).
[ 0.160473] devtmpfs: initialized
[ 0.160473] regulator: core version 0.5
[ 0.160473] regulator: dummy:
[ 0.160473] Time: 17:03:34 Date: 03/23/11
[ 0.160545] NET: Registered protocol family 16
[ 0.160931] ACPI: bus type pci registered
[ 0.161107] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.161116] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.161120] PCI: Using MMCONFIG for extended config space
[ 0.161126] PCI: Using configuration type 1 for base access
[ 0.164192] bio: create slab <bio-0> at 0
[ 0.167060] ACPI: EC: Look up EC in DSDT
[ 0.177308] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.179515] ACPI: SSDT 3f6db03c 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.180343] ACPI: Dynamic OEM Table Load:
[ 0.180352] ACPI: SSDT (null) 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.181045] ACPI: SSDT 3f6da9d2 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.181788] ACPI: Dynamic OEM Table Load:
[ 0.181796] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.182742] ACPI: SSDT 3f6db281 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.183518] ACPI: Dynamic OEM Table Load:
[ 0.183527] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.183871] ACPI: SSDT 3f6dafb7 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.184639] ACPI: Dynamic OEM Table Load:
[ 0.184647] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.188331] ACPI: Interpreter enabled
[ 0.188346] ACPI: (supports S0 S3 S4 S5)
[ 0.188398] ACPI: Using IOAPIC for interrupt routing
[ 0.211472] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.211954] ACPI: No dock devices found.
[ 0.211965] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.213415] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.216259] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.216267] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.216274] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.216282] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.216288] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.216296] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[ 0.216326] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.216395] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.216413] pci 0000:00:02.0: reg 10: [mem 0xf0500000-0xf057ffff]
[ 0.216424] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.216436] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.216447] pci 0000:00:02.0: reg 1c: [mem 0xf0600000-0xf063ffff]
[ 0.216498] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.216513] pci 0000:00:02.1: reg 10: [mem 0xf0580000-0xf05fffff]
[ 0.216639] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.216670] pci 0000:00:1b.0: reg 10: [mem 0xf0640000-0xf0643fff 64bit]
[ 0.216772] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.216782] pci 0000:00:1b.0: PME# disabled
[ 0.216822] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.216928] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.216937] pci 0000:00:1c.0: PME# disabled
[ 0.216982] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.217087] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.217096] pci 0000:00:1c.1: PME# disabled
[ 0.217138] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.217242] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.217251] pci 0000:00:1c.2: PME# disabled
[ 0.217300] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.217371] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.217427] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.217498] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.217562] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.217632] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.217688] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.217758] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.217829] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.217863] pci 0000:00:1d.7: reg 10: [mem 0xf0844000-0xf08443ff]
[ 0.217976] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.217985] pci 0000:00:1d.7: PME# disabled
[ 0.218020] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.218128] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.218246] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.218255] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.218268] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.218322] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.218346] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.218364] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.218382] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.218400] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.218418] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.218482] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.218509] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf]
[ 0.218526] pci 0000:00:1f.2: reg 14: [io 0x18c0-0x18c3]
[ 0.218543] pci 0000:00:1f.2: reg 18: [io 0x18a8-0x18af]
[ 0.218561] pci 0000:00:1f.2: reg 1c: [io 0x180c-0x180f]
[ 0.218577] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.218595] pci 0000:00:1f.2: reg 24: [mem 0xf0844400-0xf08447ff]
[ 0.218639] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.218647] pci 0000:00:1f.2: PME# disabled
[ 0.218674] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.218752] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.218988] pci 0000:02:00.0: [14e4:1713] type 0 class 0x000200
[ 0.219064] pci 0000:02:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.219385] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.219400] pci 0000:02:00.0: PME# disabled
[ 0.219553] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.219562] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.219572] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.219586] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.219664] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.219672] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.219682] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.219695] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.220037] pci 0000:05:00.0: [14e4:4315] type 0 class 0x000280
[ 0.220114] pci 0000:05:00.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
[ 0.220420] pci 0000:05:00.0: supports D1 D2
[ 0.220426] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.220441] pci 0000:05:00.0: PME# disabled
[ 0.220624] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.220634] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.220644] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.220657] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.220762] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.220772] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.220781] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.220794] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.220802] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.220808] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.220815] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.220822] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.220829] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.220836] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.220873] pci_bus 0000:00: on NUMA node 0
[ 0.220885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.221482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.221635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.221849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.235488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.235679] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.235863] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.236066] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.236258] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.236446] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.236635] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.236821] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.236902] HEST: Table is not found!
[ 0.237066] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.237088] vgaarb: loaded
[ 0.237506] SCSI subsystem initialized
[ 0.237614] PCI: Using ACPI for IRQ routing
[ 0.237614] PCI: pci_cache_line_size set to 64 bytes
[ 0.237614] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.237614] reserve RAM buffer: 000000003f6d0000 - 000000003fffffff
[ 0.237614] NetLabel: Initializing
[ 0.237614] NetLabel: domain hash size = 128
[ 0.237614] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.237614] NetLabel: unlabeled traffic allowed by default
[ 0.237614] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.237614] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.237614] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.244066] Switching to clocksource tsc
[ 0.246476] AppArmor: AppArmor Filesystem Enabled
[ 0.246514] pnp: PnP ACPI init
[ 0.246573] ACPI: bus type pnp registered
[ 0.250673] pnp 00:00: [bus 00-ff]
[ 0.250683] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.250689] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.250695] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.250702] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.250708] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.250714] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.250720] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.250726] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.250732] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.250738] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.250744] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.250750] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.250756] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.250763] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.250769] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.250775] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.250781] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.250787] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.250793] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.250957] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.251047] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.251053] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.251059] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.251065] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.251070] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.251076] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.251081] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.251087] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.251205] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251823] pnp 00:02: [io 0x0000-0x001f]
[ 0.251830] pnp 00:02: [io 0x0081-0x0091]
[ 0.251836] pnp 00:02: [io 0x0093-0x009f]
[ 0.251841] pnp 00:02: [io 0x00c0-0x00df]
[ 0.251847] pnp 00:02: [dma 4]
[ 0.251957] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.252212] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.252349] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.252391] pnp 00:04: [io 0x00f0]
[ 0.252411] pnp 00:04: [irq 13]
[ 0.252513] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.252552] pnp 00:05: [io 0x0061]
[ 0.252558] pnp 00:05: [io 0x0063]
[ 0.252563] pnp 00:05: [io 0x0065]
[ 0.252568] pnp 00:05: [io 0x0067]
[ 0.252576] pnp 00:05: [io 0x0070]
[ 0.252581] pnp 00:05: [io 0x0080]
[ 0.252586] pnp 00:05: [io 0x0092]
[ 0.252591] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.252597] pnp 00:05: [io 0x0800-0x080f]
[ 0.252602] pnp 00:05: [io 0x1000-0x107f]
[ 0.252607] pnp 00:05: [io 0x1180-0x11bf]
[ 0.252612] pnp 00:05: [io 0x1640-0x164f]
[ 0.252617] pnp 00:05: [io 0xfe00]
[ 0.252622] pnp 00:05: [io 0x0380-0x0384]
[ 0.252628] pnp 00:05: [io 0x0386-0x0387]
[ 0.252789] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252873] pnp 00:06: [io 0x06a0-0x06af]
[ 0.252879] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.253011] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253044] pnp 00:07: [io 0x0070-0x0077]
[ 0.253058] pnp 00:07: [irq 8]
[ 0.253160] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.253242] pnp 00:08: [io 0x0060]
[ 0.253248] pnp 00:08: [io 0x0064]
[ 0.253260] pnp 00:08: [irq 1]
[ 0.253366] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.253405] pnp 00:09: [irq 12]
[ 0.253521] pnp 00:09: Plug and Play ACPI device, IDs SYN1024 SYN1000 SYN0002 PNP0f13 (active)
[ 0.253599] pnp: PnP ACPI: found 10 devices
[ 0.253604] ACPI: ACPI bus type pnp unregistered
[ 0.253612] PnPBIOS: Disabled by ACPI PNP
[ 0.253642] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.253650] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.253657] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.253665] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.253672] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.253679] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.253687] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.253694] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.253708] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.253723] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.253731] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.253738] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.253745] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.253752] system 00:05: [io 0xfe00] has been reserved
[ 0.253758] system 00:05: [io 0x0380-0x0384] has been reserved
[ 0.253765] system 00:05: [io 0x0386-0x0387] has been reserved
[ 0.253778] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.253784] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.294081] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.294095] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.294102] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.294110] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.294121] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.294131] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.294144] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.294152] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.294163] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.294172] pci 0000:00:1c.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.294186] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.294193] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.294204] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.294213] pci 0000:00:1c.2: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.294227] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.294231] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.294241] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.294250] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.294296] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.294307] pci 0000:00:1c.0: setting latency timer to 64
[ 0.294327] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.294337] pci 0000:00:1c.1: setting latency timer to 64
[ 0.294357] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.294366] pci 0000:00:1c.2: setting latency timer to 64
[ 0.294382] pci 0000:00:1e.0: setting latency timer to 64
[ 0.294391] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.294397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.294404] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.294410] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.294416] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.294423] pci_bus 0000:00: resource 9 [mem 0x40000000-0xfebfffff]
[ 0.294430] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.294436] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.294443] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.294450] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.294456] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.294462] pci_bus 0000:03: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.294469] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.294475] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.294482] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.294489] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.294495] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.294501] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.294508] pci_bus 0000:06: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.294514] pci_bus 0000:06: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.294521] pci_bus 0000:06: resource 9 [mem 0x40000000-0xfebfffff]
[ 0.294670] NET: Registered protocol family 2
[ 0.294832] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.295497] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.296527] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.297029] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.297036] TCP reno registered
[ 0.297048] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.297069] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.297404] NET: Registered protocol family 1
[ 0.297451] pci 0000:00:02.0: Boot video device
[ 0.297861] PCI: CLS 64 bytes, default 64
[ 0.297979] Unpacking initramfs...
[ 0.771691] Freeing initrd memory: 10688k freed
[ 0.782931] Simple Boot Flag at 0x36 set to 0x1
[ 0.783750] Scanning for low memory corruption every 60 seconds
[ 0.784144] audit: initializing netlink socket (disabled)
[ 0.784178] type=2000 audit(1300899814.780:1): initialized
[ 0.814128] highmem bounce pool size: 64 pages
[ 0.814141] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.814544] VFS: Disk quotas dquot_6.5.2
[ 0.814620] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.814937] msgmni has been set to 1731
[ 0.815361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.815423] io scheduler noop registered
[ 0.815430] io scheduler deadline registered
[ 0.815477] io scheduler cfq registered (default)
[ 0.816149] intel_idle: MWAIT substates: 0x20220
[ 0.816172] intel_idle: v0.4 model 0x1C
[ 0.816177] intel_idle: lapic_timer_reliable_states 0x2
[ 0.816194] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.816281] ERST: Table is not found!
[ 0.816322] isapnp: Scanning for PnP cards...
[ 1.170241] isapnp: No Plug & Play device found
[ 1.170789] Switching to clocksource hpet
[ 1.171083] Non-volatile memory driver v1.3
[ 1.171089] Linux agpgart interface v0.103
[ 1.171301] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.171492] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.171656] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.175389] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.175574] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.217692] Fixed MDIO Bus: probed
[ 1.217814] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.229855] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.229861] If AUX port is really absent please use the 'i8042.noaux' option.
[ 1.243745] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.243762] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.244059] mice: PS/2 mouse device common for all mice
[ 1.246308] cpuidle: using governor ladder
[ 1.246582] cpuidle: using governor menu
[ 1.247166] TCP cubic registered
[ 1.247321] NET: Registered protocol family 10
[ 1.248126] lo: Disabled Privacy Extensions
[ 1.248637] Registering the dns_resolver key type
[ 1.248781] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 1.248817] Using IPI No-Shortcut mode
[ 1.249101] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD1600BEVS-08VAT2_WD-WXE309PV6424-part2
[ 1.266181] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.293847] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 2.364606] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 2.372168] PM: Hibernation image not present or could not be loaded.
[ 2.372217] registered taskstats version 1
[ 2.372985] Magic number: 3:27:88
[ 2.373271] Freeing unused kernel memory: 428k freed
[ 2.373635] Write protecting the kernel text: 4028k
[ 2.373707] Write protecting the kernel read-only data: 1732k
[ 2.472556] ACPI: acpi_idle yielding to intel_idle
[ 2.489850] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.489858] ACPI: Thermal Zone [TZ00] (58 C)
[ 2.508757] udev[70]: starting version 166
[ 2.597201] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.597383] ACPI: Power Button [PWRB]
[ 2.597587] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.597736] ACPI: Sleep Button [SLPB]
[ 2.597937] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 2.864495] usbcore: registered new interface driver usbfs
[ 2.864639] usbcore: registered new interface driver hub
[ 2.864779] usbcore: registered new device driver usb
[ 2.865256] libata version 3.00 loaded.
[ 2.896645] ACPI: Lid Switch [LID]
[ 2.896922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.897092] ACPI: Power Button [PWRF]
[ 2.959673] acpi device:04: registered as cooling_device2
[ 2.960178] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 2.960353] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.996834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.996938] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.997002] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.997013] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.997081] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.035058] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 3.035086] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.038997] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.039050] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
[ 3.052073] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.052141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.052151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.052160] usb usb1: Product: EHCI Host Controller
[ 3.052167] usb usb1: Manufacturer: Linux 2.6.37.4-17-vanilla ehci_hcd
[ 3.052175] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.052627] hub 1-0:1.0: USB hub found
[ 3.052644] hub 1-0:1.0: 8 ports detected
[ 3.053823] ata_piix 0000:00:1f.1: version 2.13
[ 3.053878] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.054020] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.055780] scsi0 : ata_piix
[ 3.056378] scsi1 : ata_piix
[ 3.058043] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 3.058053] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 3.058133] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.058147] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 3.058835] ata2: port disabled. ignoring.
[ 3.084706] rtc_cmos 00:07: RTC can wake from S4
[ 3.096929] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.104343] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.104403] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.212130] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.213693] scsi2 : ata_piix
[ 3.214112] scsi3 : ata_piix
[ 3.214303] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 3.214313] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 3.214725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.214748] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.214757] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.214786] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.228173] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 3.228333] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.228341] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.228347] usb usb2: Product: UHCI Host Controller
[ 3.228352] usb usb2: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.228358] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.228729] hub 2-0:1.0: USB hub found
[ 3.228748] hub 2-0:1.0: 2 ports detected
[ 3.228983] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.229001] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.229009] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.229030] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.229133] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 3.229224] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.229231] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.229237] usb usb3: Product: UHCI Host Controller
[ 3.229242] usb usb3: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.229247] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.229586] hub 3-0:1.0: USB hub found
[ 3.229604] hub 3-0:1.0: 2 ports detected
[ 3.229815] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.229831] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.229839] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.229858] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.229985] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 3.230074] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.230081] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.230087] usb usb4: Product: UHCI Host Controller
[ 3.230092] usb usb4: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.230098] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.230443] hub 4-0:1.0: USB hub found
[ 3.230460] hub 4-0:1.0: 2 ports detected
[ 3.230678] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.230694] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.230701] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.230721] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.230843] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 3.230931] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.230938] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.230944] usb usb5: Product: UHCI Host Controller
[ 3.230949] usb usb5: Manufacturer: Linux 2.6.37.4-17-vanilla uhci_hcd
[ 3.230954] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.231297] hub 5-0:1.0: USB hub found
[ 3.231314] hub 5-0:1.0: 2 ports detected
[ 3.364160] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.425458] ata3.00: ATA-8: WDC WD1600BEVS-08VAT2, 14.01A14, max UDMA/133
[ 3.425476] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.433107] ata3.00: configured for UDMA/133
[ 3.433507] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 14.0 PQ: 0 ANSI: 5
[ 3.434413] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.434674] sd 2:0:0:0: [sda] Write Protect is off
[ 3.434687] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.434796] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.463876] sda: sda1 sda2 sda3
[ 3.465350] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.537330] [drm] Initialized drm 1.1.0 20060810
[ 3.617233] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.617248] i915 0000:00:02.0: setting latency timer to 64
[ 3.682515] usb 1-3: New USB device found, idVendor=5986, idProduct=0241
[ 3.682525] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.682534] usb 1-3: Product: Lenovo EasyCamera
[ 3.682540] usb 1-3: Manufacturer: BISON Corporation
[ 3.729004] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.729516] [drm] initialized overlay support
[ 3.936160] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 4.031280] Console: switching to colour frame buffer device 128x36
[ 4.037971] fb0: inteldrmfb frame buffer device
[ 4.037976] drm: registered panic notifier
[ 4.038242] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.079408] usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
[ 4.079421] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.079431] usb 1-5: Product: USB2.0-CRW
[ 4.079438] usb 1-5: Manufacturer: Generic
[ 4.079446] usb 1-5: SerialNumber: 20071114173400000
[ 4.133918] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 4.133929] PM: Basic memory bitmaps created
[ 4.148437] PM: Basic memory bitmaps freed
[ 4.148450] video LNXVIDEO:00: Restoring backlight state
[ 4.196140] usb 1-7: new high speed USB device using ehci_hcd and address 5
[ 4.237880] PM: Starting manual resume from disk
[ 4.237888] PM: Hibernation image partition 8:2 present
[ 4.237892] PM: Looking for hibernation image.
[ 4.238285] PM: Image not found (code -22)
[ 4.238294] PM: Hibernation image not present or could not be loaded.
[ 4.332290] usb 1-7: New USB device found, idVendor=0bdb, idProduct=1900
[ 4.332308] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.332321] usb 1-7: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 4.332333] usb 1-7: Manufacturer: Ericsson
[ 4.332343] usb 1-7: SerialNumber: 0115650004270950
[ 4.584121] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 4.642875] EXT3-fs: barriers not enabled
[ 4.643403] kjournald starting. Commit interval 5 seconds
[ 4.644000] EXT3-fs (sda1): using internal journal
[ 4.644060] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 4.755266] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2150
[ 4.755285] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.755300] usb 3-2: Product: BCM2046 Bluetooth Device
[ 4.755310] usb 3-2: Manufacturer: Broadcom Corp
[ 4.755323] usb 3-2: SerialNumber: 00242CF78FB9
[ 8.673217] udev[420]: starting version 166
[ 9.217188] intel_rng: FWH not detected
[ 9.281938] ACPI: Battery Slot [BAT0] (battery present)
[ 9.290286] ACPI: AC Adapter [ACAD] (on-line)
[ 9.359656] wmi: Mapper loaded
[ 9.398903] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.413620] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.435267] Bluetooth: Core ver 2.15
[ 9.435343] NET: Registered protocol family 31
[ 9.435349] Bluetooth: HCI device and connection manager initialized
[ 9.435357] Bluetooth: HCI socket layer initialized
[ 9.516823] iTCO_vendor_support: vendor-support=0
[ 9.567103] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 9.567361] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 9.567550] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.760444] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.770170] Linux video capture interface: v2.00
[ 9.865579] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9.866096] usbcore: registered new interface driver btusb
[ 9.881291] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.881309] ACPI: resource 0000:00:1f.3 [io 0x18e0-0x18ff] conflicts with ACPI region SMBI [??? 0x000018e0-0x000018ef flags 0x49]
[ 9.881319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.946580] leds_ss4200: no LED devices found
[ 9.952514] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
[ 9.957164] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8
[ 9.957425] usbcore: registered new interface driver uvcvideo
[ 9.957433] USB Video Class driver (v1.0.0)
[ 10.299764] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.299901] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[ 10.299965] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.301050] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 10.307940] tg3.c:v3.115 (October 14, 2010)
[ 10.308118] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.308183] tg3 0000:02:00.0: setting latency timer to 64
[ 10.388134] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:23:8b:95:a7:20
[ 10.388146] tg3 0000:02:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 10.388154] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 10.388162] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 10.442886] ALSA patch_realtek.c:1521: SKU: Nid=0x1d sku_cfg=0x4015812d
[ 10.442900] ALSA patch_realtek.c:1523: SKU: port_connectivity=0x1
[ 10.442910] ALSA patch_realtek.c:1524: SKU: enable_pcbeep=0x1
[ 10.442919] ALSA patch_realtek.c:1525: SKU: check_sum=0x00000005
[ 10.442928] ALSA patch_realtek.c:1526: SKU: customization=0x00000081
[ 10.442937] ALSA patch_realtek.c:1527: SKU: external_amp=0x5
[ 10.442945] ALSA patch_realtek.c:1528: SKU: platform_type=0x1
[ 10.442954] ALSA patch_realtek.c:1529: SKU: swap=0x0
[ 10.442962] ALSA patch_realtek.c:1530: SKU: override=0x1
[ 10.446264] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.446535] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.544772] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.544803] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[ 10.564646] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 10.564676] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 10.564702] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 10.564727] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 10.612432] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 10.691070] cfg80211: Calling CRDA to update world regulatory domain
[ 11.113407] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 11.676649] cfg80211: World regulatory domain updated:
[ 11.676657] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.676666] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.676672] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.676679] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.676685] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.676692] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.798120] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.800213] Registered led device: b43-phy0::tx
[ 11.800332] Registered led device: b43-phy0::rx
[ 11.800436] Registered led device: b43-phy0::radio
[ 11.800488] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 11.812485] usb 1-5: selecting invalid altsetting 1
[ 11.815076] usbcore: registered new interface driver uas
[ 11.908541] cdc_acm 1-7:1.1: ttyACM0: USB ACM device
[ 11.910489] cdc_acm 1-7:1.3: ttyACM1: USB ACM device
[ 11.911819] cdc_acm 1-7:1.9: ttyACM2: USB ACM device
[ 11.912865] usbcore: registered new interface driver cdc_acm
[ 11.912874] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 11.933950] Initializing USB Mass Storage driver...
[ 11.934606] cdc_wdm 1-7:1.5: cdc-wdm0: USB WDM device
[ 11.934773] cdc_wdm 1-7:1.6: cdc-wdm1: USB WDM device
[ 11.934854] usbcore: registered new interface driver cdc_wdm
[ 11.935952] scsi4 : usb-storage 1-5:1.0
[ 11.936573] usbcore: registered new interface driver usb-storage
[ 11.936581] USB Mass Storage support registered.
[ 11.960502] cdc_ether 1-7:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-7, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 11.960608] usbcore: registered new interface driver cdc_ether
[ 12.004820] usbcore: registered new interface driver zaurus
[ 12.681425] Adding 1566332k swap on /dev/sda2. Priority:-1 extents:1 across:1566332k
[ 12.938692] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 12.939342] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 12.949153] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.278409] device-mapper: uevent: version 1.0.3
[ 13.278969] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 16.272262] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
[ 16.546890] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
[ 16.551325] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 17.476012] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 17.483696] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 17.528920] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.786419] nf_conntrack version 0.5.0 (15885 buckets, 63540 max)
[ 17.830830] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.461579] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 27.023678] Bluetooth: L2CAP ver 2.15
[ 27.023686] Bluetooth: L2CAP socket layer initialized
[ 27.237758] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.237767] Bluetooth: BNEP filters: protocol multicast
[ 27.326177] Bluetooth: SCO (Voice Link) ver 0.6
[ 27.326186] Bluetooth: SCO socket layer initialized
[ 27.650142] Bluetooth: RFCOMM TTY layer initialized
[ 27.650159] Bluetooth: RFCOMM socket layer initialized
[ 27.650165] Bluetooth: RFCOMM ver 1.11
[ 29.311852] tg3 0000:02:00.0: irq 41 for MSI/MSI-X
[ 29.349857] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.976681] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 30.976692] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[ 30.977358] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.512767] NET: Registered protocol family 17
[ 41.744019] eth0: no IPv6 routers present
[ 43.639081] padlock: VIA PadLock Hash Engine not detected.
[ 43.752108] device-mapper: ioctl: unable to remove open device temporary-cryptsetup-2114
[ 45.259732] EXT3-fs: barriers not enabled
[ 45.277717] kjournald starting. Commit interval 5 seconds
[ 45.277871] EXT3-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended
[ 45.278675] EXT3-fs (dm-0): using internal journal
[ 45.278694] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 47.686946] start_kdeinit (2263): /proc/2263/oom_adj is deprecated, please use /proc/2263/oom_score_adj instead.
[ 71.667968] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 242.427514] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:23:8b:95:a7:20:00:1d:7d:d2:c3:3d:08:00 SRC=192.168.0.2 DST=192.168.0.13 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=22579 DF PROTO=TCP SPT=49475 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A004EAB470000000001030307)
[-- Attachment #4: config --]
[-- Type: application/octet-stream, Size: 124123 bytes --]
#
# Automatically generated make config: don't edit
# Linux/i386 2.6.37 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_SUSE_KERNEL=y
CONFIG_SPLIT_PACKAGE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-17-vanilla"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_HARDIRQS_SW_RESEND is not set
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_MRST is not set
# CONFIG_X86_RDC321X is not set
CONFIG_X86_32_NON_STANDARD=y
# CONFIG_X86_NUMAQ is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_SUMMIT is not set
CONFIG_X86_ES7000=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_IOMMU_API=y
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
CONFIG_SUSPEND_NVS=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=m
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=m
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_GX_SUSPMOD=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
CONFIG_X86_E_POWERSAVER=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_OLPC=y
CONFIG_OLPC_XO1=m
CONFIG_OLPC_OPENFIRMWARE=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
# CONFIG_PHONET_PIPECTRLR is not set
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_RPS=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_MCP251X=m
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_PCH_CAN=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_TSCAN1=m
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_TESTS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
CONFIG_MTD_GPIO_ADDR=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND_ECC=m
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=m
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=m
CONFIG_PCH_PHUB=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=m
# CONFIG_IWMC3200TOP_DEBUG is not set
# CONFIG_IWMC3200TOP_DEBUGFS is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_WINBOND_VLB=m
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
CONFIG_MII=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM63XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_DNET=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_AC3200=m
CONFIG_KSZ884X_PCI=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_CS89x0=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_JME=m
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_DA is not set
CONFIG_STMMAC_DUAL_MAC=y
CONFIG_PCH_GBE=m
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4_DEPENDS=y
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF_DEPENDS=y
CONFIG_CHELSIO_T4VF=m
CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_BNA=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_BE2NET=m
CONFIG_TR=m
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_SMCTR=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_AR9170_USB=m
CONFIG_AR9170_LEDS=y
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not set
CONFIG_CARL9170_WPC=y
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=m
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLWIFI=m
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
CONFIG_IWM=m
# CONFIG_IWM_DEBUG is not set
# CONFIG_IWM_TRACING is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI_PCI=y
# CONFIG_RT2800PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
# CONFIG_RT2800USB_RT30XX is not set
# CONFIG_RT2800USB_RT35XX is not set
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_HT=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL1271=m
CONFIG_WL1271_SPI=m
CONFIG_WL1271_SDIO=m
CONFIG_WL12XX_PLATFORM_DATA=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
CONFIG_CAIF_SPI_SLAVE=m
# CONFIG_CAIF_SPI_SYNC is not set
CONFIG_FDDI=m
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_I4L=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_QT602240=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_WINBOND_CIR=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT_PCAP=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX3107=m
CONFIG_SERIAL_MRST_MAX3110=m
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_INTEL_MID=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_STUB=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_TOPCLIFF_PCH=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_XILINX_PLTFM=m
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=m
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_BASIC_MMIO=m
CONFIG_GPIO_IT8761E=m
CONFIG_GPIO_SCH=m
CONFIG_GPIO_VX855=m
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_ADP5588=m
#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=m
CONFIG_GPIO_LANGWELL=y
CONFIG_GPIO_PCH=m
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_RDC321X=m
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_74X164=m
#
# AC97 GPIO expanders:
#
CONFIG_GPIO_UCB1400=y
#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=m
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_OLPC=m
CONFIG_BATTERY_BQ20Z75=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_MAX17040=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_PKGTEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_MC13783_ADC=m
#
# ACPI drivers
#
CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_GEODE_WDT=m
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=m
CONFIG_UCB1400_CORE=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
# CONFIG_ABX500_CORE is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_TIMBERDALE=m
CONFIG_LPC_SCH=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_VX855=m
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_BQ24022=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_PCAP=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_AD5398=m
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_IR_CORE=m
CONFIG_VIDEO_IR=m
CONFIG_LIRC=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_ENE=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_STREAMZAP=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_SAA7164=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_VIA_CAMERA=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_IMX074=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_SOC_CAMERA_MT9T112=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_SOC_CAMERA_RJ54N1=m
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_SOC_CAMERA_OV6650=m
CONFIG_SOC_CAMERA_OV772X=m
CONFIG_SOC_CAMERA_OV9640=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_ET61X251=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_TESTDEV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_ZOLTRIX=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_MR800=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_TIMBERDALE=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_SIANO_MDTV=m
#
# Siano module components
#
CONFIG_SMS_USB_DRV=m
CONFIG_SMS_SDIO_DRV=m
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=m
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_FIREWIRE=y
# CONFIG_DVB_FIREDTV_IEEE1394 is not set
CONFIG_DVB_FIREDTV_INPUT=y
#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=m
#
# Supported Mantis Adapters
#
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=m
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_STUB_POULSBO=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=m
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP8860=m
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_OPL4_LIB_SEQ=m
CONFIG_SND_SBAWE_SEQ=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_WSS_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT1605=m
CONFIG_SND_AZT2316=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4236=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_SC6000=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_JAZZ16=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_MSND_PINNACLE=m
CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=2
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_MSNDCLAS=m
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
# CONFIG_SOUND_SB is not set
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_3M_PCT=m
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX_FF=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CANDO=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EGALAX=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWII_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MOSART=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_QUANTA=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_ROCCAT_KONE=m
CONFIG_HID_ROCCAT_PYRA=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_STANTUM=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WACOM_POWER_SUPPLY=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SAMBA=m
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_NET5501=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_ALIX2=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_DELL_NETBOOKS=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MCE_INJ=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_MCE=y
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM831X=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PCAP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=m
CONFIG_INTEL_IOATDMA=m
CONFIG_TIMB_DMA=m
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_ET131X=m
# CONFIG_ET131X_DEBUG is not set
CONFIG_SLICOSS=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_GO7007_OV7640=m
CONFIG_VIDEO_GO7007_SAA7113=m
CONFIG_VIDEO_GO7007_SAA7115=m
CONFIG_VIDEO_GO7007_TW9903=m
CONFIG_VIDEO_GO7007_UDA1342=m
CONFIG_VIDEO_GO7007_SONY_TUNER=m
CONFIG_VIDEO_GO7007_TW2804=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_STRADIS=m
CONFIG_USB_IP_COMMON=m
CONFIG_USB_IP_VHCI_HCD=m
CONFIG_USB_IP_HOST=m
# CONFIG_USB_IP_DEBUG_ENABLE is not set
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
CONFIG_ECHO=m
CONFIG_BRCM80211=m
CONFIG_BRCM80211_PCI=y
# CONFIG_BRCMFMAC is not set
CONFIG_RT2860=m
CONFIG_RT2870=m
# CONFIG_COMEDI is not set
CONFIG_ASUS_OLED=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_R8187SE=m
CONFIG_RTL8192U=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
# CONFIG_R8712_AP is not set
CONFIG_TRANZPORT=m
CONFIG_POHMELFS=m
# CONFIG_POHMELFS_DEBUG is not set
CONFIG_POHMELFS_CRYPTO=y
CONFIG_AUTOFS_FS=m
CONFIG_IDE_PHISON=m
CONFIG_LINE6_USB=m
# CONFIG_LINE6_USB_DEBUG is not set
# CONFIG_LINE6_USB_DUMP_CTRL is not set
# CONFIG_LINE6_USB_DUMP_MIDI is not set
# CONFIG_LINE6_USB_DUMP_PCM is not set
# CONFIG_LINE6_USB_RAW is not set
# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_NOUVEAU_DEBUG is not set
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_USB_SERIAL_QUATECH2=m
CONFIG_USB_SERIAL_QUATECH_USB2=m
CONFIG_VT6655=m
CONFIG_VT6656=m
CONFIG_FB_UDL=m
CONFIG_HYPERV=m
CONFIG_HYPERV_STORAGE=m
CONFIG_HYPERV_BLOCK=m
CONFIG_HYPERV_NET=m
CONFIG_HYPERV_UTILS=m
CONFIG_VME_BUS=m
#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=m
#
# VME Device Drivers
#
CONFIG_VME_USER=m
#
# VME Board Drivers
#
CONFIG_VMIVME_7805=m
CONFIG_IIO=m
CONFIG_IIO_RING_BUFFER=y
CONFIG_IIO_SW_RING=m
CONFIG_IIO_TRIGGER=y
#
# Accelerometers
#
CONFIG_ADIS16209=m
CONFIG_ADIS16220=m
CONFIG_ADIS16240=m
CONFIG_KXSD9=m
CONFIG_LIS3L02DQ=m
CONFIG_SCA3000=m
#
# Analog to digital convertors
#
CONFIG_MAX1363=m
CONFIG_MAX1363_RING_BUFFER=y
CONFIG_AD799X=m
CONFIG_AD799X_RING_BUFFER=y
CONFIG_AD7476=m
#
# Digital gyroscope sensors
#
CONFIG_ADIS16260=m
#
# Inertial measurement units
#
CONFIG_ADIS16300=m
CONFIG_ADIS16350=m
CONFIG_ADIS16400=m
#
# Light sensors
#
CONFIG_SENSORS_TSL2563=m
CONFIG_SENSORS_ISL29018=m
#
# Magnetometer sensors
#
CONFIG_SENSORS_AK8975=m
CONFIG_SENSORS_HMC5843=m
#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=m
CONFIG_IIO_GPIO_TRIGGER=m
CONFIG_ZRAM=m
CONFIG_WLAGS49_H2=m
CONFIG_WLAGS49_H25=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_FB_SM7XX=m
CONFIG_VIDEO_DT3155=m
CONFIG_DT3155_CCIR=y
CONFIG_CRYSTALHD=m
CONFIG_CXT1E1=m
CONFIG_SBE_PMCC4_NCOMM=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_ST_BT is not set
CONFIG_ADIS16255=m
CONFIG_FB_XGI=m
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_I2C=m
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_IT87=m
CONFIG_LIRC_ITE8709=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_TTUSBIR=m
CONFIG_LIRC_ZILOG=m
# CONFIG_SMB_FS is not set
CONFIG_EASYCAP=m
CONFIG_SOLO6X10=m
CONFIG_ACPI_QUICKSTART=m
CONFIG_MACH_NO_WESTBRIDGE=y
CONFIG_SBE_2T3E3=m
CONFIG_ATH6K_LEGACY=m
CONFIG_AR600x_SD31_XXX=y
# CONFIG_AR600x_WB31_XXX is not set
# CONFIG_AR600x_SD32_XXX is not set
# CONFIG_AR600x_CUSTOM_XXX is not set
CONFIG_ATH6KL_ENABLE_COEXISTENCE=y
CONFIG_AR600x_DUAL_ANTENNA=y
# CONFIG_AR600x_SINGLE_ANTENNA is not set
# CONFIG_AR600x_BT_QCOM is not set
# CONFIG_AR600x_BT_CSR is not set
CONFIG_AR600x_BT_AR3001=y
CONFIG_ATH6KL_HCI_BRIDGE=y
# CONFIG_ATH6KL_CONFIG_GPIO_BT_RESET is not set
CONFIG_ATH6KL_CFG80211=y
CONFIG_ATH6KL_HTC_RAW_INTERFACE=y
CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_USB_ENESTORAGE=m
CONFIG_BCM_WIMAX=m
CONFIG_FT1000=m
CONFIG_FT1000_USB=m
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
CONFIG_IBM_RTL=m
CONFIG_XO1_RFKILL=m
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
CONFIG_NFSD=m
CONFIG_NFSD_DEPRECATED=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_FSCACHE is not set
CONFIG_CIFS_ACL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
CONFIG_9P_FS=m
# CONFIG_9P_FSCACHE is not set
CONFIG_9P_FS_POSIX_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
CONFIG_BKL=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_LKDTM=m
CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=m
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 16:31 Corrupted files after suspend to disk richard -rw- weinberger
@ 2011-03-23 20:36 ` Rafael J. Wysocki
2011-03-23 21:49 ` richard -rw- weinberger
0 siblings, 1 reply; 46+ messages in thread
From: Rafael J. Wysocki @ 2011-03-23 20:36 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: LKML, linux-pm
On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> Hi,
>
> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> running Linux 2.6.37.4.
> After resuming from s2disk some files are corrupted.
> But when I reboot my netbook everything seems good again.
>
> When I saw the problem the first time the ls command segfaulted always.
> I did a reboot and it worked again.
>
> A few days later zypper crashed. After a reboot it worked again.
> And today ssh crashed. I looked a bit closer and saw it crashed
> somewhere within libcrypto.
> So I made copy libcrypto and rebooted.
> After the reboot ssh worked again but libcrypto and the copy of it hat
> a different sha1 sum!
> WTF?!
>
> Is this a known issue?
No.
> dmesgs and config are attached.
>
> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
> (default from suse).
> I'm using ext3 as root filesystem.
> What else do you need?
Whatever you can do to narrow down the problem. At the moment I only know
that it's there.
Thanks,
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 20:36 ` Rafael J. Wysocki
@ 2011-03-23 21:49 ` richard -rw- weinberger
2011-03-23 22:11 ` Rafael J. Wysocki
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2011-03-23 21:49 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: LKML, linux-pm
2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
> On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> Hi,
>>
>> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>> running Linux 2.6.37.4.
>> After resuming from s2disk some files are corrupted.
>> But when I reboot my netbook everything seems good again.
>>
>> When I saw the problem the first time the ls command segfaulted always.
>> I did a reboot and it worked again.
>>
>> A few days later zypper crashed. After a reboot it worked again.
>> And today ssh crashed. I looked a bit closer and saw it crashed
>> somewhere within libcrypto.
>> So I made copy libcrypto and rebooted.
>> After the reboot ssh worked again but libcrypto and the copy of it hat
>> a different sha1 sum!
>> WTF?!
>>
>> Is this a known issue?
>
> No.
>
>> dmesgs and config are attached.
>>
>> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
>> (default from suse).
>> I'm using ext3 as root filesystem.
>> What else do you need?
>
> Whatever you can do to narrow down the problem. At the moment I only know
> that it's there.
I can reproduce the problem now.
After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
It's always a very basic lib like libcrypto, libglib which is used all
the time on my system.
Maybe it's an issue like this one?
https://lkml.org/lkml/2010/12/2/339
> Thanks,
> Rafael
>
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 21:49 ` richard -rw- weinberger
@ 2011-03-23 22:11 ` Rafael J. Wysocki
2011-03-23 22:16 ` richard -rw- weinberger
2011-03-23 22:33 ` richard -rw- weinberger
0 siblings, 2 replies; 46+ messages in thread
From: Rafael J. Wysocki @ 2011-03-23 22:11 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: LKML, linux-pm
On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >> Hi,
> >>
> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> >> running Linux 2.6.37.4.
> >> After resuming from s2disk some files are corrupted.
> >> But when I reboot my netbook everything seems good again.
> >>
> >> When I saw the problem the first time the ls command segfaulted always.
> >> I did a reboot and it worked again.
> >>
> >> A few days later zypper crashed. After a reboot it worked again.
> >> And today ssh crashed. I looked a bit closer and saw it crashed
> >> somewhere within libcrypto.
> >> So I made copy libcrypto and rebooted.
> >> After the reboot ssh worked again but libcrypto and the copy of it hat
> >> a different sha1 sum!
> >> WTF?!
> >>
> >> Is this a known issue?
> >
> > No.
> >
> >> dmesgs and config are attached.
> >>
> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
> >> (default from suse).
> >> I'm using ext3 as root filesystem.
> >> What else do you need?
> >
> > Whatever you can do to narrow down the problem. At the moment I only know
> > that it's there.
>
> I can reproduce the problem now.
> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
> It's always a very basic lib like libcrypto, libglib which is used all
> the time on my system.
Those files are never intentionally modified, right?
> Maybe it's an issue like this one?
> https://lkml.org/lkml/2010/12/2/339
It might have if that patch hadn't been merged before 2.6.37.
Is the system 32-bit or 64-bit?
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 22:11 ` Rafael J. Wysocki
@ 2011-03-23 22:16 ` richard -rw- weinberger
2011-03-23 22:22 ` Rafael J. Wysocki
2011-03-23 22:33 ` richard -rw- weinberger
1 sibling, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2011-03-23 22:16 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: LKML, linux-pm
On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
>> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >> Hi,
>> >>
>> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>> >> running Linux 2.6.37.4.
>> >> After resuming from s2disk some files are corrupted.
>> >> But when I reboot my netbook everything seems good again.
>> >>
>> >> When I saw the problem the first time the ls command segfaulted always.
>> >> I did a reboot and it worked again.
>> >>
>> >> A few days later zypper crashed. After a reboot it worked again.
>> >> And today ssh crashed. I looked a bit closer and saw it crashed
>> >> somewhere within libcrypto.
>> >> So I made copy libcrypto and rebooted.
>> >> After the reboot ssh worked again but libcrypto and the copy of it hat
>> >> a different sha1 sum!
>> >> WTF?!
>> >>
>> >> Is this a known issue?
>> >
>> > No.
>> >
>> >> dmesgs and config are attached.
>> >>
>> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
>> >> (default from suse).
>> >> I'm using ext3 as root filesystem.
>> >> What else do you need?
>> >
>> > Whatever you can do to narrow down the problem. At the moment I only know
>> > that it's there.
>>
>> I can reproduce the problem now.
>> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
>> It's always a very basic lib like libcrypto, libglib which is used all
>> the time on my system.
>
> Those files are never intentionally modified, right?
>
>> Maybe it's an issue like this one?
>> https://lkml.org/lkml/2010/12/2/339
>
> It might have if that patch hadn't been merged before 2.6.37.
>
> Is the system 32-bit or 64-bit?
It's a 32-bit system.
cmp shows that the corrupted files differ in many bytes (not scattered).
The corrupted bytes are always 0 or 252.
> Rafael
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 22:16 ` richard -rw- weinberger
@ 2011-03-23 22:22 ` Rafael J. Wysocki
2011-03-23 22:30 ` richard -rw- weinberger
0 siblings, 1 reply; 46+ messages in thread
From: Rafael J. Wysocki @ 2011-03-23 22:22 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: LKML, linux-pm
On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >> >> Hi,
> >> >>
> >> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> >> >> running Linux 2.6.37.4.
> >> >> After resuming from s2disk some files are corrupted.
> >> >> But when I reboot my netbook everything seems good again.
> >> >>
> >> >> When I saw the problem the first time the ls command segfaulted always.
> >> >> I did a reboot and it worked again.
> >> >>
> >> >> A few days later zypper crashed. After a reboot it worked again.
> >> >> And today ssh crashed. I looked a bit closer and saw it crashed
> >> >> somewhere within libcrypto.
> >> >> So I made copy libcrypto and rebooted.
> >> >> After the reboot ssh worked again but libcrypto and the copy of it hat
> >> >> a different sha1 sum!
> >> >> WTF?!
> >> >>
> >> >> Is this a known issue?
> >> >
> >> > No.
> >> >
> >> >> dmesgs and config are attached.
> >> >>
> >> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
> >> >> (default from suse).
> >> >> I'm using ext3 as root filesystem.
> >> >> What else do you need?
> >> >
> >> > Whatever you can do to narrow down the problem. At the moment I only know
> >> > that it's there.
> >>
> >> I can reproduce the problem now.
> >> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
> >> It's always a very basic lib like libcrypto, libglib which is used all
> >> the time on my system.
> >
> > Those files are never intentionally modified, right?
> >
> >> Maybe it's an issue like this one?
> >> https://lkml.org/lkml/2010/12/2/339
> >
> > It might have if that patch hadn't been merged before 2.6.37.
> >
> > Is the system 32-bit or 64-bit?
>
> It's a 32-bit system.
> cmp shows that the corrupted files differ in many bytes (not scattered).
> The corrupted bytes are always 0 or 252.
Do I understand correctly that the files apparently corrupted after resume
are not corrupted any more when you reboot?
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 22:22 ` Rafael J. Wysocki
@ 2011-03-23 22:30 ` richard -rw- weinberger
2011-03-23 23:00 ` Rafael J. Wysocki
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2011-03-23 22:30 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: LKML, linux-pm
On Wed, Mar 23, 2011 at 11:22 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
>> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >> >> Hi,
>> >> >>
>> >> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>> >> >> running Linux 2.6.37.4.
>> >> >> After resuming from s2disk some files are corrupted.
>> >> >> But when I reboot my netbook everything seems good again.
>> >> >>
>> >> >> When I saw the problem the first time the ls command segfaulted always.
>> >> >> I did a reboot and it worked again.
>> >> >>
>> >> >> A few days later zypper crashed. After a reboot it worked again.
>> >> >> And today ssh crashed. I looked a bit closer and saw it crashed
>> >> >> somewhere within libcrypto.
>> >> >> So I made copy libcrypto and rebooted.
>> >> >> After the reboot ssh worked again but libcrypto and the copy of it hat
>> >> >> a different sha1 sum!
>> >> >> WTF?!
>> >> >>
>> >> >> Is this a known issue?
>> >> >
>> >> > No.
>> >> >
>> >> >> dmesgs and config are attached.
>> >> >>
>> >> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
>> >> >> (default from suse).
>> >> >> I'm using ext3 as root filesystem.
>> >> >> What else do you need?
>> >> >
>> >> > Whatever you can do to narrow down the problem. At the moment I only know
>> >> > that it's there.
>> >>
>> >> I can reproduce the problem now.
>> >> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
>> >> It's always a very basic lib like libcrypto, libglib which is used all
>> >> the time on my system.
>> >
>> > Those files are never intentionally modified, right?
>> >
>> >> Maybe it's an issue like this one?
>> >> https://lkml.org/lkml/2010/12/2/339
>> >
>> > It might have if that patch hadn't been merged before 2.6.37.
>> >
>> > Is the system 32-bit or 64-bit?
>>
>> It's a 32-bit system.
>> cmp shows that the corrupted files differ in many bytes (not scattered).
>> The corrupted bytes are always 0 or 252.
>
> Do I understand correctly that the files apparently corrupted after resume
> are not corrupted any more when you reboot?
Yes.
Seems like a cache issue.
> Rafael
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 22:30 ` richard -rw- weinberger
@ 2011-03-23 23:00 ` Rafael J. Wysocki
2011-03-24 10:16 ` richard -rw- weinberger
0 siblings, 1 reply; 46+ messages in thread
From: Rafael J. Wysocki @ 2011-03-23 23:00 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: LKML, linux-pm
On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> On Wed, Mar 23, 2011 at 11:22 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >> On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >> >> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
> >> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >> >> >> Hi,
> >> >> >>
> >> >> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> >> >> >> running Linux 2.6.37.4.
> >> >> >> After resuming from s2disk some files are corrupted.
> >> >> >> But when I reboot my netbook everything seems good again.
> >> >> >>
> >> >> >> When I saw the problem the first time the ls command segfaulted always.
> >> >> >> I did a reboot and it worked again.
> >> >> >>
> >> >> >> A few days later zypper crashed. After a reboot it worked again.
> >> >> >> And today ssh crashed. I looked a bit closer and saw it crashed
> >> >> >> somewhere within libcrypto.
> >> >> >> So I made copy libcrypto and rebooted.
> >> >> >> After the reboot ssh worked again but libcrypto and the copy of it hat
> >> >> >> a different sha1 sum!
> >> >> >> WTF?!
> >> >> >>
> >> >> >> Is this a known issue?
> >> >> >
> >> >> > No.
> >> >> >
> >> >> >> dmesgs and config are attached.
> >> >> >>
> >> >> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
> >> >> >> (default from suse).
> >> >> >> I'm using ext3 as root filesystem.
> >> >> >> What else do you need?
> >> >> >
> >> >> > Whatever you can do to narrow down the problem. At the moment I only know
> >> >> > that it's there.
> >> >>
> >> >> I can reproduce the problem now.
> >> >> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
> >> >> It's always a very basic lib like libcrypto, libglib which is used all
> >> >> the time on my system.
> >> >
> >> > Those files are never intentionally modified, right?
> >> >
> >> >> Maybe it's an issue like this one?
> >> >> https://lkml.org/lkml/2010/12/2/339
> >> >
> >> > It might have if that patch hadn't been merged before 2.6.37.
> >> >
> >> > Is the system 32-bit or 64-bit?
> >>
> >> It's a 32-bit system.
> >> cmp shows that the corrupted files differ in many bytes (not scattered).
> >> The corrupted bytes are always 0 or 252.
> >
> > Do I understand correctly that the files apparently corrupted after resume
> > are not corrupted any more when you reboot?
>
> Yes.
> Seems like a cache issue.
There's a couple things you can check before we start asking other people for
help.
First, it would be good to know if things change when you save the image
into a swap file instead of the swap partition you've been using so far
(I believe it's documented quite well how to do that).
Second, please verify if using the built-in save/load hibernate code leads
to the same issue (you can hibernate by doing "echo disk > /sys/power/state"
to verify that).
Of course, please test the above separately. :-)
Thanks,
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 23:00 ` Rafael J. Wysocki
@ 2011-03-24 10:16 ` richard -rw- weinberger
2011-03-24 19:37 ` richard -rw- weinberger
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2011-03-24 10:16 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: LKML, linux-pm
On Thu, Mar 24, 2011 at 12:00 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> On Wed, Mar 23, 2011 at 11:22 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >> On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >> >> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
>> >> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >> >> >> Hi,
>> >> >> >>
>> >> >> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>> >> >> >> running Linux 2.6.37.4.
>> >> >> >> After resuming from s2disk some files are corrupted.
>> >> >> >> But when I reboot my netbook everything seems good again.
>> >> >> >>
>> >> >> >> When I saw the problem the first time the ls command segfaulted always.
>> >> >> >> I did a reboot and it worked again.
>> >> >> >>
>> >> >> >> A few days later zypper crashed. After a reboot it worked again.
>> >> >> >> And today ssh crashed. I looked a bit closer and saw it crashed
>> >> >> >> somewhere within libcrypto.
>> >> >> >> So I made copy libcrypto and rebooted.
>> >> >> >> After the reboot ssh worked again but libcrypto and the copy of it hat
>> >> >> >> a different sha1 sum!
>> >> >> >> WTF?!
>> >> >> >>
>> >> >> >> Is this a known issue?
>> >> >> >
>> >> >> > No.
>> >> >> >
>> >> >> >> dmesgs and config are attached.
>> >> >> >>
>> >> >> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
>> >> >> >> (default from suse).
>> >> >> >> I'm using ext3 as root filesystem.
>> >> >> >> What else do you need?
>> >> >> >
>> >> >> > Whatever you can do to narrow down the problem. At the moment I only know
>> >> >> > that it's there.
>> >> >>
>> >> >> I can reproduce the problem now.
>> >> >> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
>> >> >> It's always a very basic lib like libcrypto, libglib which is used all
>> >> >> the time on my system.
>> >> >
>> >> > Those files are never intentionally modified, right?
>> >> >
>> >> >> Maybe it's an issue like this one?
>> >> >> https://lkml.org/lkml/2010/12/2/339
>> >> >
>> >> > It might have if that patch hadn't been merged before 2.6.37.
>> >> >
>> >> > Is the system 32-bit or 64-bit?
>> >>
>> >> It's a 32-bit system.
>> >> cmp shows that the corrupted files differ in many bytes (not scattered).
>> >> The corrupted bytes are always 0 or 252.
>> >
>> > Do I understand correctly that the files apparently corrupted after resume
>> > are not corrupted any more when you reboot?
>>
>> Yes.
>> Seems like a cache issue.
>
> There's a couple things you can check before we start asking other people for
> help.
>
> First, it would be good to know if things change when you save the image
> into a swap file instead of the swap partition you've been using so far
> (I believe it's documented quite well how to do that).
>
> Second, please verify if using the built-in save/load hibernate code leads
> to the same issue (you can hibernate by doing "echo disk > /sys/power/state"
> to verify that).
>
> Of course, please test the above separately. :-)
Ok, I'll test this when I'm at home.
BTW: dropping the caches helps, when some files seem corrupted.
Today /usr/bin/okular was broken.
After setting vm.drop_caches=1 it worked again.
> Thanks,
> Rafael
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-24 10:16 ` richard -rw- weinberger
@ 2011-03-24 19:37 ` richard -rw- weinberger
2011-03-24 22:30 ` Rafael J. Wysocki
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2011-03-24 19:37 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: LKML, linux-pm
On Thu, Mar 24, 2011 at 11:16 AM, richard -rw- weinberger
<richard.weinberger@gmail.com> wrote:
> On Thu, Mar 24, 2011 at 12:00 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>>> On Wed, Mar 23, 2011 at 11:22 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>>> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>>> >> On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>>> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>>> >> >> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
>>> >> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>>> >> >> >> Hi,
>>> >> >> >>
>>> >> >> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>>> >> >> >> running Linux 2.6.37.4.
>>> >> >> >> After resuming from s2disk some files are corrupted.
>>> >> >> >> But when I reboot my netbook everything seems good again.
>>> >> >> >>
>>> >> >> >> When I saw the problem the first time the ls command segfaulted always.
>>> >> >> >> I did a reboot and it worked again.
>>> >> >> >>
>>> >> >> >> A few days later zypper crashed. After a reboot it worked again.
>>> >> >> >> And today ssh crashed. I looked a bit closer and saw it crashed
>>> >> >> >> somewhere within libcrypto.
>>> >> >> >> So I made copy libcrypto and rebooted.
>>> >> >> >> After the reboot ssh worked again but libcrypto and the copy of it hat
>>> >> >> >> a different sha1 sum!
>>> >> >> >> WTF?!
>>> >> >> >>
>>> >> >> >> Is this a known issue?
>>> >> >> >
>>> >> >> > No.
>>> >> >> >
>>> >> >> >> dmesgs and config are attached.
>>> >> >> >>
>>> >> >> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
>>> >> >> >> (default from suse).
>>> >> >> >> I'm using ext3 as root filesystem.
>>> >> >> >> What else do you need?
>>> >> >> >
>>> >> >> > Whatever you can do to narrow down the problem. At the moment I only know
>>> >> >> > that it's there.
>>> >> >>
>>> >> >> I can reproduce the problem now.
>>> >> >> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
>>> >> >> It's always a very basic lib like libcrypto, libglib which is used all
>>> >> >> the time on my system.
>>> >> >
>>> >> > Those files are never intentionally modified, right?
>>> >> >
>>> >> >> Maybe it's an issue like this one?
>>> >> >> https://lkml.org/lkml/2010/12/2/339
>>> >> >
>>> >> > It might have if that patch hadn't been merged before 2.6.37.
>>> >> >
>>> >> > Is the system 32-bit or 64-bit?
>>> >>
>>> >> It's a 32-bit system.
>>> >> cmp shows that the corrupted files differ in many bytes (not scattered).
>>> >> The corrupted bytes are always 0 or 252.
>>> >
>>> > Do I understand correctly that the files apparently corrupted after resume
>>> > are not corrupted any more when you reboot?
>>>
>>> Yes.
>>> Seems like a cache issue.
>>
>> There's a couple things you can check before we start asking other people for
>> help.
>>
>> First, it would be good to know if things change when you save the image
>> into a swap file instead of the swap partition you've been using so far
>> (I believe it's documented quite well how to do that).
>>
>> Second, please verify if using the built-in save/load hibernate code leads
>> to the same issue (you can hibernate by doing "echo disk > /sys/power/state"
>> to verify that).
>>
>> Of course, please test the above separately. :-)
>
> Ok, I'll test this when I'm at home.
>
> BTW: dropping the caches helps, when some files seem corrupted.
> Today /usr/bin/okular was broken.
> After setting vm.drop_caches=1 it worked again.
>
>> Thanks,
>> Rafael
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>
>
> --
> Thanks,
> //richard
>
On Linux 2.6.38 I'm unable to reproduce the issue.
Only 2.6.37 seems to be affected.
So, I'm moving over to 2.6.38. :)
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-24 19:37 ` richard -rw- weinberger
@ 2011-03-24 22:30 ` Rafael J. Wysocki
2012-02-16 10:52 ` richard -rw- weinberger
0 siblings, 1 reply; 46+ messages in thread
From: Rafael J. Wysocki @ 2011-03-24 22:30 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: LKML, linux-pm
On Thursday, March 24, 2011, richard -rw- weinberger wrote:
> On Thu, Mar 24, 2011 at 11:16 AM, richard -rw- weinberger
> <richard.weinberger@gmail.com> wrote:
> > On Thu, Mar 24, 2011 at 12:00 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> >> On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >>> On Wed, Mar 23, 2011 at 11:22 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> >>> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >>> >> On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> >>> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >>> >> >> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
> >>> >> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
> >>> >> >> >> Hi,
> >>> >> >> >>
> >>> >> >> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> >>> >> >> >> running Linux 2.6.37.4.
> >>> >> >> >> After resuming from s2disk some files are corrupted.
> >>> >> >> >> But when I reboot my netbook everything seems good again.
> >>> >> >> >>
> >>> >> >> >> When I saw the problem the first time the ls command segfaulted always.
> >>> >> >> >> I did a reboot and it worked again.
> >>> >> >> >>
> >>> >> >> >> A few days later zypper crashed. After a reboot it worked again.
> >>> >> >> >> And today ssh crashed. I looked a bit closer and saw it crashed
> >>> >> >> >> somewhere within libcrypto.
> >>> >> >> >> So I made copy libcrypto and rebooted.
> >>> >> >> >> After the reboot ssh worked again but libcrypto and the copy of it hat
> >>> >> >> >> a different sha1 sum!
> >>> >> >> >> WTF?!
> >>> >> >> >>
> >>> >> >> >> Is this a known issue?
> >>> >> >> >
> >>> >> >> > No.
> >>> >> >> >
> >>> >> >> >> dmesgs and config are attached.
> >>> >> >> >>
> >>> >> >> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
> >>> >> >> >> (default from suse).
> >>> >> >> >> I'm using ext3 as root filesystem.
> >>> >> >> >> What else do you need?
> >>> >> >> >
> >>> >> >> > Whatever you can do to narrow down the problem. At the moment I only know
> >>> >> >> > that it's there.
> >>> >> >>
> >>> >> >> I can reproduce the problem now.
> >>> >> >> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
> >>> >> >> It's always a very basic lib like libcrypto, libglib which is used all
> >>> >> >> the time on my system.
> >>> >> >
> >>> >> > Those files are never intentionally modified, right?
> >>> >> >
> >>> >> >> Maybe it's an issue like this one?
> >>> >> >> https://lkml.org/lkml/2010/12/2/339
> >>> >> >
> >>> >> > It might have if that patch hadn't been merged before 2.6.37.
> >>> >> >
> >>> >> > Is the system 32-bit or 64-bit?
> >>> >>
> >>> >> It's a 32-bit system.
> >>> >> cmp shows that the corrupted files differ in many bytes (not scattered).
> >>> >> The corrupted bytes are always 0 or 252.
> >>> >
> >>> > Do I understand correctly that the files apparently corrupted after resume
> >>> > are not corrupted any more when you reboot?
> >>>
> >>> Yes.
> >>> Seems like a cache issue.
> >>
> >> There's a couple things you can check before we start asking other people for
> >> help.
> >>
> >> First, it would be good to know if things change when you save the image
> >> into a swap file instead of the swap partition you've been using so far
> >> (I believe it's documented quite well how to do that).
> >>
> >> Second, please verify if using the built-in save/load hibernate code leads
> >> to the same issue (you can hibernate by doing "echo disk > /sys/power/state"
> >> to verify that).
> >>
> >> Of course, please test the above separately. :-)
> >
> > Ok, I'll test this when I'm at home.
> >
> > BTW: dropping the caches helps, when some files seem corrupted.
> > Today /usr/bin/okular was broken.
> > After setting vm.drop_caches=1 it worked again.
> >
> >> Thanks,
> >> Rafael
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >> Please read the FAQ at http://www.tux.org/lkml/
> >>
> >
> > --
> > Thanks,
> > //richard
> >
>
> On Linux 2.6.38 I'm unable to reproduce the issue.
> Only 2.6.37 seems to be affected.
> So, I'm moving over to 2.6.38. :)
OK, thanks for the report. :-)
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-24 22:30 ` Rafael J. Wysocki
@ 2012-02-16 10:52 ` richard -rw- weinberger
2012-02-16 16:30 ` Dave Jones
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2012-02-16 10:52 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: LKML, linux-pm
On Thu, Mar 24, 2011 at 11:30 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Thursday, March 24, 2011, richard -rw- weinberger wrote:
>> On Thu, Mar 24, 2011 at 11:16 AM, richard -rw- weinberger
>> <richard.weinberger@gmail.com> wrote:
>> > On Thu, Mar 24, 2011 at 12:00 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> >> On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >>> On Wed, Mar 23, 2011 at 11:22 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> >>> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >>> >> On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> >>> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >>> >> >> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
>> >>> >> >> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >>> >> >> >> Hi,
>> >>> >> >> >>
>> >>> >> >> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>> >>> >> >> >> running Linux 2.6.37.4.
>> >>> >> >> >> After resuming from s2disk some files are corrupted.
>> >>> >> >> >> But when I reboot my netbook everything seems good again.
>> >>> >> >> >>
>> >>> >> >> >> When I saw the problem the first time the ls command segfaulted always.
>> >>> >> >> >> I did a reboot and it worked again.
>> >>> >> >> >>
>> >>> >> >> >> A few days later zypper crashed. After a reboot it worked again.
>> >>> >> >> >> And today ssh crashed. I looked a bit closer and saw it crashed
>> >>> >> >> >> somewhere within libcrypto.
>> >>> >> >> >> So I made copy libcrypto and rebooted.
>> >>> >> >> >> After the reboot ssh worked again but libcrypto and the copy of it hat
>> >>> >> >> >> a different sha1 sum!
>> >>> >> >> >> WTF?!
>> >>> >> >> >>
>> >>> >> >> >> Is this a known issue?
>> >>> >> >> >
>> >>> >> >> > No.
>> >>> >> >> >
>> >>> >> >> >> dmesgs and config are attached.
>> >>> >> >> >>
>> >>> >> >> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
>> >>> >> >> >> (default from suse).
>> >>> >> >> >> I'm using ext3 as root filesystem.
>> >>> >> >> >> What else do you need?
>> >>> >> >> >
>> >>> >> >> > Whatever you can do to narrow down the problem. At the moment I only know
>> >>> >> >> > that it's there.
>> >>> >> >>
>> >>> >> >> I can reproduce the problem now.
>> >>> >> >> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
>> >>> >> >> It's always a very basic lib like libcrypto, libglib which is used all
>> >>> >> >> the time on my system.
>> >>> >> >
>> >>> >> > Those files are never intentionally modified, right?
>> >>> >> >
>> >>> >> >> Maybe it's an issue like this one?
>> >>> >> >> https://lkml.org/lkml/2010/12/2/339
>> >>> >> >
>> >>> >> > It might have if that patch hadn't been merged before 2.6.37.
>> >>> >> >
>> >>> >> > Is the system 32-bit or 64-bit?
>> >>> >>
>> >>> >> It's a 32-bit system.
>> >>> >> cmp shows that the corrupted files differ in many bytes (not scattered).
>> >>> >> The corrupted bytes are always 0 or 252.
>> >>> >
>> >>> > Do I understand correctly that the files apparently corrupted after resume
>> >>> > are not corrupted any more when you reboot?
>> >>>
>> >>> Yes.
>> >>> Seems like a cache issue.
>> >>
>> >> There's a couple things you can check before we start asking other people for
>> >> help.
>> >>
>> >> First, it would be good to know if things change when you save the image
>> >> into a swap file instead of the swap partition you've been using so far
>> >> (I believe it's documented quite well how to do that).
>> >>
>> >> Second, please verify if using the built-in save/load hibernate code leads
>> >> to the same issue (you can hibernate by doing "echo disk > /sys/power/state"
>> >> to verify that).
>> >>
>> >> Of course, please test the above separately. :-)
>> >
>> > Ok, I'll test this when I'm at home.
>> >
>> > BTW: dropping the caches helps, when some files seem corrupted.
>> > Today /usr/bin/okular was broken.
>> > After setting vm.drop_caches=1 it worked again.
>> >
>> >> Thanks,
>> >> Rafael
>> >> --
>> >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> >> the body of a message to majordomo@vger.kernel.org
>> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> >> Please read the FAQ at http://www.tux.org/lkml/
>> >>
>> >
>> > --
>> > Thanks,
>> > //richard
>> >
>>
>> On Linux 2.6.38 I'm unable to reproduce the issue.
>> Only 2.6.37 seems to be affected.
>> So, I'm moving over to 2.6.38. :)
>
> OK, thanks for the report. :-)
>
> Rafael
Bad news:
I saw the issue on 3.x too but thought it's because my IdeaPad s10 is crap.
Now with my shiny new Lenovo x121e I have the same issue! :-(
OpenSUSE 12.1, kernel 3.2.7.
After a few suspend2disk iterations random files are corrupted.
But only cached files. A reboot solves the problem.
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-02-16 10:52 ` richard -rw- weinberger
@ 2012-02-16 16:30 ` Dave Jones
2012-02-16 21:51 ` Rafael J. Wysocki
2012-02-16 23:27 ` Eric Sandeen
0 siblings, 2 replies; 46+ messages in thread
From: Dave Jones @ 2012-02-16 16:30 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: Rafael J. Wysocki, LKML, linux-pm, esandeen
On Thu, Feb 16, 2012 at 11:52:27AM +0100, richard -rw- weinberger wrote:
> >> >> Of course, please test the above separately. :-)
> >> >
> >> > Ok, I'll test this when I'm at home.
> >> >
> >> > BTW: dropping the caches helps, when some files seem corrupted.
> >> > Today /usr/bin/okular was broken.
> >> > After setting vm.drop_caches=1 it worked again.
> >>
> >> On Linux 2.6.38 I'm unable to reproduce the issue.
> >> Only 2.6.37 seems to be affected.
> >> So, I'm moving over to 2.6.38. :)
> >
> Bad news:
> I saw the issue on 3.x too but thought it's because my IdeaPad s10 is crap.
> Now with my shiny new Lenovo x121e I have the same issue! :-(
>
> OpenSUSE 12.1, kernel 3.2.7.
> After a few suspend2disk iterations random files are corrupted.
> But only cached files. A reboot solves the problem.
FWIW, we've been seeing a number of hard to diagnose failures
with suspend to disk for the last few releases in Fedora.
Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
for a while, but there's no smoking gun that really explains what's
getting into these states. Further complicating things, is that it
doesn't seem to be 100% reproducable.
Dave
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-02-16 16:30 ` Dave Jones
@ 2012-02-16 21:51 ` Rafael J. Wysocki
2012-02-16 22:26 ` [linux-pm] " Alan Stern
2012-02-16 23:27 ` Eric Sandeen
1 sibling, 1 reply; 46+ messages in thread
From: Rafael J. Wysocki @ 2012-02-16 21:51 UTC (permalink / raw)
To: Dave Jones; +Cc: richard -rw- weinberger, LKML, linux-pm, esandeen
On Thursday, February 16, 2012, Dave Jones wrote:
> On Thu, Feb 16, 2012 at 11:52:27AM +0100, richard -rw- weinberger wrote:
>
> > >> >> Of course, please test the above separately. :-)
> > >> >
> > >> > Ok, I'll test this when I'm at home.
> > >> >
> > >> > BTW: dropping the caches helps, when some files seem corrupted.
> > >> > Today /usr/bin/okular was broken.
> > >> > After setting vm.drop_caches=1 it worked again.
> > >>
> > >> On Linux 2.6.38 I'm unable to reproduce the issue.
> > >> Only 2.6.37 seems to be affected.
> > >> So, I'm moving over to 2.6.38. :)
> > >
> > Bad news:
> > I saw the issue on 3.x too but thought it's because my IdeaPad s10 is crap.
> > Now with my shiny new Lenovo x121e I have the same issue! :-(
> >
> > OpenSUSE 12.1, kernel 3.2.7.
> > After a few suspend2disk iterations random files are corrupted.
> > But only cached files. A reboot solves the problem.
>
> FWIW, we've been seeing a number of hard to diagnose failures
> with suspend to disk for the last few releases in Fedora.
> Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
> for a while, but there's no smoking gun that really explains what's
> getting into these states. Further complicating things, is that it
> doesn't seem to be 100% reproducable.
I wonder if that's reproducible with the filesystems freezing patch I posted
some time ago (it will need some rebasing to apply to the current mainline or
3.2.y).
I also thing that this problem discovered by Alan Stern may be involved:
http://marc.info/?l=linux-pm&m=132940331030253&w=4
Thanks,
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [linux-pm] Corrupted files after suspend to disk
2012-02-16 21:51 ` Rafael J. Wysocki
@ 2012-02-16 22:26 ` Alan Stern
2012-02-16 23:07 ` richard -rw- weinberger
0 siblings, 1 reply; 46+ messages in thread
From: Alan Stern @ 2012-02-16 22:26 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Dave Jones, richard -rw- weinberger, linux-pm, LKML, esandeen
On Thu, 16 Feb 2012, Rafael J. Wysocki wrote:
> > FWIW, we've been seeing a number of hard to diagnose failures
> > with suspend to disk for the last few releases in Fedora.
> > Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
> > for a while, but there's no smoking gun that really explains what's
> > getting into these states. Further complicating things, is that it
> > doesn't seem to be 100% reproducable.
>
> I wonder if that's reproducible with the filesystems freezing patch I posted
> some time ago (it will need some rebasing to apply to the current mainline or
> 3.2.y).
>
> I also thing that this problem discovered by Alan Stern may be involved:
>
> http://marc.info/?l=linux-pm&m=132940331030253&w=4
Probably not, unless the filesystems in question are on a USB drive.
Still, if anyone wants to test it, there's a patch here:
http://marc.info/?l=linux-pm&m=132941053601190&w=4
Alan Stern
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [linux-pm] Corrupted files after suspend to disk
2012-02-16 22:26 ` [linux-pm] " Alan Stern
@ 2012-02-16 23:07 ` richard -rw- weinberger
2012-02-16 23:16 ` Rafael J. Wysocki
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2012-02-16 23:07 UTC (permalink / raw)
To: Alan Stern; +Cc: Rafael J. Wysocki, Dave Jones, linux-pm, LKML, esandeen
On Thu, Feb 16, 2012 at 11:26 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
> On Thu, 16 Feb 2012, Rafael J. Wysocki wrote:
>
>> > FWIW, we've been seeing a number of hard to diagnose failures
>> > with suspend to disk for the last few releases in Fedora.
>> > Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
>> > for a while, but there's no smoking gun that really explains what's
>> > getting into these states. Further complicating things, is that it
>> > doesn't seem to be 100% reproducable.
>>
>> I wonder if that's reproducible with the filesystems freezing patch I posted
>> some time ago (it will need some rebasing to apply to the current mainline or
>> 3.2.y).
Where can I find this patch?
I'll happily test it.
But it may take some time as the bug is not easy to reproduce.
>> I also thing that this problem discovered by Alan Stern may be involved:
>>
>> http://marc.info/?l=linux-pm&m=132940331030253&w=4
>
> Probably not, unless the filesystems in question are on a USB drive.
The filesystems are no on a USB device.
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [linux-pm] Corrupted files after suspend to disk
2012-02-16 23:07 ` richard -rw- weinberger
@ 2012-02-16 23:16 ` Rafael J. Wysocki
2012-02-16 23:22 ` richard -rw- weinberger
2012-03-06 20:03 ` Andreas Hartmann
0 siblings, 2 replies; 46+ messages in thread
From: Rafael J. Wysocki @ 2012-02-16 23:16 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: Alan Stern, Dave Jones, linux-pm, LKML, esandeen
On Friday, February 17, 2012, richard -rw- weinberger wrote:
> On Thu, Feb 16, 2012 at 11:26 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
> > On Thu, 16 Feb 2012, Rafael J. Wysocki wrote:
> >
> >> > FWIW, we've been seeing a number of hard to diagnose failures
> >> > with suspend to disk for the last few releases in Fedora.
> >> > Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
> >> > for a while, but there's no smoking gun that really explains what's
> >> > getting into these states. Further complicating things, is that it
> >> > doesn't seem to be 100% reproducable.
> >>
> >> I wonder if that's reproducible with the filesystems freezing patch I posted
> >> some time ago (it will need some rebasing to apply to the current mainline or
> >> 3.2.y).
>
> Where can I find this patch?
> I'll happily test it.
> But it may take some time as the bug is not easy to reproduce.
This is the last version posted:
http://marc.info/?l=linux-kernel&m=132775832509351&w=4
However, it only may help if you use the kernel-based hibernation i.e.
"echo disk > /sys/power/state" (that may be worth testing without the
patch too, but Fedora is using this AFAICS, so it probably has that
problem too).
Thanks,
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [linux-pm] Corrupted files after suspend to disk
2012-02-16 23:16 ` Rafael J. Wysocki
@ 2012-02-16 23:22 ` richard -rw- weinberger
2012-03-06 20:03 ` Andreas Hartmann
1 sibling, 0 replies; 46+ messages in thread
From: richard -rw- weinberger @ 2012-02-16 23:22 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: Alan Stern, Dave Jones, linux-pm, LKML, esandeen
On Fri, Feb 17, 2012 at 12:16 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Friday, February 17, 2012, richard -rw- weinberger wrote:
>> On Thu, Feb 16, 2012 at 11:26 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
>> > On Thu, 16 Feb 2012, Rafael J. Wysocki wrote:
>> >
>> >> > FWIW, we've been seeing a number of hard to diagnose failures
>> >> > with suspend to disk for the last few releases in Fedora.
>> >> > Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
>> >> > for a while, but there's no smoking gun that really explains what's
>> >> > getting into these states. Further complicating things, is that it
>> >> > doesn't seem to be 100% reproducable.
>> >>
>> >> I wonder if that's reproducible with the filesystems freezing patch I posted
>> >> some time ago (it will need some rebasing to apply to the current mainline or
>> >> 3.2.y).
>>
>> Where can I find this patch?
>> I'll happily test it.
>> But it may take some time as the bug is not easy to reproduce.
>
> This is the last version posted:
>
> http://marc.info/?l=linux-kernel&m=132775832509351&w=4
>
> However, it only may help if you use the kernel-based hibernation i.e.
> "echo disk > /sys/power/state" (that may be worth testing without the
> patch too, but Fedora is using this AFAICS, so it probably has that
> problem too).
Okay, I'll use kernel-based hibernation from now on.
If the problem still occurs I'll apply your patch.
Stay tuned!
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-02-16 23:16 ` Rafael J. Wysocki
2012-02-16 23:22 ` richard -rw- weinberger
@ 2012-03-06 20:03 ` Andreas Hartmann
2012-03-06 23:54 ` Andreas Hartmann
1 sibling, 1 reply; 46+ messages in thread
From: Andreas Hartmann @ 2012-03-06 20:03 UTC (permalink / raw)
To: linux-kernel
Rafael J. Wysocki schrieb:
> On Friday, February 17, 2012, richard -rw- weinberger wrote:
>> On Thu, Feb 16, 2012 at 11:26 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
>>> On Thu, 16 Feb 2012, Rafael J. Wysocki wrote:
>>>
>>>>> FWIW, we've been seeing a number of hard to diagnose failures
>>>>> with suspend to disk for the last few releases in Fedora.
>>>>> Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
>>>>> for a while, but there's no smoking gun that really explains what's
>>>>> getting into these states. Further complicating things, is that it
>>>>> doesn't seem to be 100% reproducable.
>>>>
>>>> I wonder if that's reproducible with the filesystems freezing patch I posted
>>>> some time ago (it will need some rebasing to apply to the current mainline or
>>>> 3.2.y).
>>
>> Where can I find this patch?
>> I'll happily test it.
>> But it may take some time as the bug is not easy to reproduce.
>
> This is the last version posted:
>
> http://marc.info/?l=linux-kernel&m=132775832509351&w=4
>
> However, it only may help if you use the kernel-based hibernation i.e.
> "echo disk > /sys/power/state" (that may be worth testing without the
> patch too, but Fedora is using this AFAICS, so it probably has that
> problem too).
I'm having the same problem. Please take a look at the following bug
report at suse for more information:
https://bugzilla.novell.com/show_bug.cgi?id=732908
Do you know, which way of suspending openSUSE uses in 12.1?
Is the above mentioned patch already part of kernel 3.3?
Thank you,
kind regards,
Andreas
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-06 20:03 ` Andreas Hartmann
@ 2012-03-06 23:54 ` Andreas Hartmann
2012-03-07 10:27 ` richard -rw- weinberger
0 siblings, 1 reply; 46+ messages in thread
From: Andreas Hartmann @ 2012-03-06 23:54 UTC (permalink / raw)
To: linux-kernel
Andreas Hartmann schrieb:
> Rafael J. Wysocki schrieb:
>> On Friday, February 17, 2012, richard -rw- weinberger wrote:
>>> On Thu, Feb 16, 2012 at 11:26 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
>>>> On Thu, 16 Feb 2012, Rafael J. Wysocki wrote:
>>>>
>>>>>> FWIW, we've been seeing a number of hard to diagnose failures
>>>>>> with suspend to disk for the last few releases in Fedora.
>>>>>> Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
>>>>>> for a while, but there's no smoking gun that really explains what's
>>>>>> getting into these states. Further complicating things, is that it
>>>>>> doesn't seem to be 100% reproducable.
>>>>>
>>>>> I wonder if that's reproducible with the filesystems freezing patch I posted
>>>>> some time ago (it will need some rebasing to apply to the current mainline or
>>>>> 3.2.y).
>>>
>>> Where can I find this patch?
>>> I'll happily test it.
>>> But it may take some time as the bug is not easy to reproduce.
>>
>> This is the last version posted:
>>
>> http://marc.info/?l=linux-kernel&m=132775832509351&w=4
>>
>> However, it only may help if you use the kernel-based hibernation i.e.
>> "echo disk > /sys/power/state" (that may be worth testing without the
>> patch too, but Fedora is using this AFAICS, so it probably has that
>> problem too).
>
> I'm having the same problem. Please take a look at the following bug
> report at suse for more information:
>
> https://bugzilla.novell.com/show_bug.cgi?id=732908
>
> Do you know, which way of suspending openSUSE uses in 12.1?
I changed SLEEP_MODULE="uswsusp" to "kernel" in
/usr/lib/pm-utils/defaults and tested your patch mentioned above with
linux 3.2.9.
Unfortunately the behaviour didn't change at all - I can see the same
problems as before.
I tested with and without X. I tested with the call "pm-hibernate" and
with "echo disk > /sys/power/state". I always could see the corrupted
files after 2 to 4 times of hibernating / resuming.
Kind regards,
Andreas
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-06 23:54 ` Andreas Hartmann
@ 2012-03-07 10:27 ` richard -rw- weinberger
2012-03-07 11:05 ` Andreas Hartmann
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2012-03-07 10:27 UTC (permalink / raw)
To: Andreas Hartmann, Rafael J. Wysocki; +Cc: linux-kernel
On Wed, Mar 7, 2012 at 12:54 AM, Andreas Hartmann
<andihartmann@01019freenet.de> wrote:
> Andreas Hartmann schrieb:
>> Rafael J. Wysocki schrieb:
>>> On Friday, February 17, 2012, richard -rw- weinberger wrote:
>>>> On Thu, Feb 16, 2012 at 11:26 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
>>>>> On Thu, 16 Feb 2012, Rafael J. Wysocki wrote:
>>>>>
>>>>>>> FWIW, we've been seeing a number of hard to diagnose failures
>>>>>>> with suspend to disk for the last few releases in Fedora.
>>>>>>> Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
>>>>>>> for a while, but there's no smoking gun that really explains what's
>>>>>>> getting into these states. Further complicating things, is that it
>>>>>>> doesn't seem to be 100% reproducable.
>>>>>>
>>>>>> I wonder if that's reproducible with the filesystems freezing patch I posted
>>>>>> some time ago (it will need some rebasing to apply to the current mainline or
>>>>>> 3.2.y).
>>>>
>>>> Where can I find this patch?
>>>> I'll happily test it.
>>>> But it may take some time as the bug is not easy to reproduce.
>>>
>>> This is the last version posted:
>>>
>>> http://marc.info/?l=linux-kernel&m=132775832509351&w=4
>>>
>>> However, it only may help if you use the kernel-based hibernation i.e.
>>> "echo disk > /sys/power/state" (that may be worth testing without the
>>> patch too, but Fedora is using this AFAICS, so it probably has that
>>> problem too).
>>
>> I'm having the same problem. Please take a look at the following bug
>> report at suse for more information:
>>
>> https://bugzilla.novell.com/show_bug.cgi?id=732908
>>
>> Do you know, which way of suspending openSUSE uses in 12.1?
>
> I changed SLEEP_MODULE="uswsusp" to "kernel" in
> /usr/lib/pm-utils/defaults and tested your patch mentioned above with
> linux 3.2.9.
>
> Unfortunately the behaviour didn't change at all - I can see the same
> problems as before.
>
> I tested with and without X. I tested with the call "pm-hibernate" and
> with "echo disk > /sys/power/state". I always could see the corrupted
> files after 2 to 4 times of hibernating / resuming.
>
>
> Kind regards,
> Andreas
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
On my system kernel suspend *seems* to work.
I've seen no corrupted files so far.
But sometimes the resume is failing. (One out of 5 resumes fails).
I was unable to get any kernel output.
So I'm not sure whether this is the same issue
or another one. :-\
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-07 10:27 ` richard -rw- weinberger
@ 2012-03-07 11:05 ` Andreas Hartmann
2012-03-12 12:03 ` Jiri Kosina
0 siblings, 1 reply; 46+ messages in thread
From: Andreas Hartmann @ 2012-03-07 11:05 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: Rafael J. Wysocki, linux-kernel
richard -rw- weinberger schrieb:
> On Wed, Mar 7, 2012 at 12:54 AM, Andreas Hartmann
> <andihartmann@01019freenet.de> wrote:
>> Andreas Hartmann schrieb:
>>> Rafael J. Wysocki schrieb:
>>>> On Friday, February 17, 2012, richard -rw- weinberger wrote:
>>>>> On Thu, Feb 16, 2012 at 11:26 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
>>>>>> On Thu, 16 Feb 2012, Rafael J. Wysocki wrote:
>>>>>>
>>>>>>>> FWIW, we've been seeing a number of hard to diagnose failures
>>>>>>>> with suspend to disk for the last few releases in Fedora.
>>>>>>>> Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
>>>>>>>> for a while, but there's no smoking gun that really explains what's
>>>>>>>> getting into these states. Further complicating things, is that it
>>>>>>>> doesn't seem to be 100% reproducable.
>>>>>>>
>>>>>>> I wonder if that's reproducible with the filesystems freezing patch I posted
>>>>>>> some time ago (it will need some rebasing to apply to the current mainline or
>>>>>>> 3.2.y).
>>>>>
>>>>> Where can I find this patch?
>>>>> I'll happily test it.
>>>>> But it may take some time as the bug is not easy to reproduce.
>>>>
>>>> This is the last version posted:
>>>>
>>>> http://marc.info/?l=linux-kernel&m=132775832509351&w=4
>>>>
>>>> However, it only may help if you use the kernel-based hibernation i.e.
>>>> "echo disk > /sys/power/state" (that may be worth testing without the
>>>> patch too, but Fedora is using this AFAICS, so it probably has that
>>>> problem too).
>>>
>>> I'm having the same problem. Please take a look at the following bug
>>> report at suse for more information:
>>>
>>> https://bugzilla.novell.com/show_bug.cgi?id=732908
>>>
>>> Do you know, which way of suspending openSUSE uses in 12.1?
>>
>> I changed SLEEP_MODULE="uswsusp" to "kernel" in
>> /usr/lib/pm-utils/defaults and tested your patch mentioned above with
>> linux 3.2.9.
>>
>> Unfortunately the behaviour didn't change at all - I can see the same
>> problems as before.
>>
>> I tested with and without X. I tested with the call "pm-hibernate" and
>> with "echo disk > /sys/power/state". I always could see the corrupted
>> files after 2 to 4 times of hibernating / resuming.
>>
>>
>> Kind regards,
>> Andreas
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>
> On my system kernel suspend *seems* to work.
> I've seen no corrupted files so far.
>
> But sometimes the resume is failing. (One out of 5 resumes fails).
> I was unable to get any kernel output.
>
> So I'm not sure whether this is the same issue
> or another one. :-\
I'm pretty sure that this is the same issue. What you are telling
correlates with my research here.
I even got resumes where the machine came up again, but nothing could be
done (it wasn't possible to switch of the password secured screen saver
any more - login at the shell wasn't possible, too, because the started
bash crashed), because of some relevant libraries have been broken.
Reboot with CTRL-ALT-DEL often doesn't work, too, because of the lack of
bash.
But afterwards, I could see in logfiles, that there were file
corruptions (e.g. in ~/.xsession-errors).
It's absolute easy for me to reproduce the problem, because it's just
more or less every time without doing something special. It isn't even
necessary to have a running X session. Runlevel 3 is enough to get the
problem triggered.
I'm checking the md5 sum of some directories each time after resuming
with this script:
#!/bin/sh
dir="/bin /sbin /lib /lib64 /usr/lib64 /usr/bin /usr/sbin"
for i in $dir
do
echo "$i"
cd $i
md5sum -c md5sum.out | grep -v "OK"
done
The initial creation is done directly after a fresh boot with this script:
#!/bin/sh
dir="/bin /sbin /lib /lib64 /usr/lib64 /usr/bin /usr/sbin"
for i in $dir
do
echo "$i"
cd $i
rm md5sum.out
md5sum * > md5sum.out
done
What about the filesystem layout (openSUSE 12.1)? I'm using the
following layout:
- /dev/sda
- /dev/sda1 -> /boot
- /dev/sda2 -> cr_sda2 (crypted partition with cryptsetup luksOpen ...)
- cr_sda2 is a PV for LVM
- The PV is put to the VG "system"
- The following LV's are part of the VG system:
/root
swap
/usr
/var
/home
/opt
cr_sda2 is decrypted during initrd.
Kind regards,
Andreas
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: Corrupted files after suspend to disk
2012-03-07 11:05 ` Andreas Hartmann
@ 2012-03-12 12:03 ` Jiri Kosina
2012-03-12 12:23 ` richard -rw- weinberger
2012-03-12 13:36 ` Andreas Hartmann
0 siblings, 2 replies; 46+ messages in thread
From: Jiri Kosina @ 2012-03-12 12:03 UTC (permalink / raw)
To: Andreas Hartmann; +Cc: richard -rw- weinberger, Rafael J. Wysocki, linux-kernel
On Wed, 7 Mar 2012, Andreas Hartmann wrote:
> > On my system kernel suspend *seems* to work.
> > I've seen no corrupted files so far.
> >
> > But sometimes the resume is failing. (One out of 5 resumes fails).
> > I was unable to get any kernel output.
> >
> > So I'm not sure whether this is the same issue
> > or another one. :-\
>
> I'm pretty sure that this is the same issue. What you are telling
> correlates with my research here.
> I even got resumes where the machine came up again, but nothing could be
> done (it wasn't possible to switch of the password secured screen saver
> any more - login at the shell wasn't possible, too, because the started
> bash crashed),
This is happening to me as well. Something like 1 resume out of 5 goes
wrong this very same way.
This is thinkpad x200s.
All the userspace is segfaulting all over the place (most frequently in
libselinux for some reason).
I am not able to verify the 'drop_caches' theory, as I can't invoke a
single command that wouldn't crash.
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 12:03 ` Jiri Kosina
@ 2012-03-12 12:23 ` richard -rw- weinberger
2012-03-12 12:30 ` Jiri Kosina
2012-03-12 13:36 ` Andreas Hartmann
1 sibling, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2012-03-12 12:23 UTC (permalink / raw)
To: Jiri Kosina; +Cc: Andreas Hartmann, Rafael J. Wysocki, linux-kernel
On Mon, Mar 12, 2012 at 1:03 PM, Jiri Kosina <jkosina@suse.cz> wrote:
> On Wed, 7 Mar 2012, Andreas Hartmann wrote:
>
>> > On my system kernel suspend *seems* to work.
>> > I've seen no corrupted files so far.
>> >
>> > But sometimes the resume is failing. (One out of 5 resumes fails).
>> > I was unable to get any kernel output.
>> >
>> > So I'm not sure whether this is the same issue
>> > or another one. :-\
>>
>> I'm pretty sure that this is the same issue. What you are telling
>> correlates with my research here.
>> I even got resumes where the machine came up again, but nothing could be
>> done (it wasn't possible to switch of the password secured screen saver
>> any more - login at the shell wasn't possible, too, because the started
>> bash crashed),
>
> This is happening to me as well. Something like 1 resume out of 5 goes
> wrong this very same way.
>
> This is thinkpad x200s.
>
> All the userspace is segfaulting all over the place (most frequently in
> libselinux for some reason).
>
> I am not able to verify the 'drop_caches' theory, as I can't invoke a
> single command that wouldn't crash.
The question is how should we proceed?
I've reported this issue one year (!!!) ago.
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 12:23 ` richard -rw- weinberger
@ 2012-03-12 12:30 ` Jiri Kosina
2012-03-12 12:58 ` richard -rw- weinberger
0 siblings, 1 reply; 46+ messages in thread
From: Jiri Kosina @ 2012-03-12 12:30 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: Andreas Hartmann, Rafael J. Wysocki, linux-kernel
On Mon, 12 Mar 2012, richard -rw- weinberger wrote:
> > This is happening to me as well. Something like 1 resume out of 5 goes
> > wrong this very same way.
> >
> > This is thinkpad x200s.
> >
> > All the userspace is segfaulting all over the place (most frequently in
> > libselinux for some reason).
> >
> > I am not able to verify the 'drop_caches' theory, as I can't invoke a
> > single command that wouldn't crash.
>
> The question is how should we proceed?
> I've reported this issue one year (!!!) ago.
Hmm, 3.3-rcX seems to be the first version when it started to happen to
me. I take it that you have seen this also with 3.2? 3.1?
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 12:30 ` Jiri Kosina
@ 2012-03-12 12:58 ` richard -rw- weinberger
2012-03-12 13:03 ` Jiri Kosina
0 siblings, 1 reply; 46+ messages in thread
From: richard -rw- weinberger @ 2012-03-12 12:58 UTC (permalink / raw)
To: Jiri Kosina; +Cc: Andreas Hartmann, Rafael J. Wysocki, linux-kernel
On Mon, Mar 12, 2012 at 1:30 PM, Jiri Kosina <jkosina@suse.cz> wrote:
> On Mon, 12 Mar 2012, richard -rw- weinberger wrote:
>
>> > This is happening to me as well. Something like 1 resume out of 5 goes
>> > wrong this very same way.
>> >
>> > This is thinkpad x200s.
>> >
>> > All the userspace is segfaulting all over the place (most frequently in
>> > libselinux for some reason).
>> >
>> > I am not able to verify the 'drop_caches' theory, as I can't invoke a
>> > single command that wouldn't crash.
>>
>> The question is how should we proceed?
>> I've reported this issue one year (!!!) ago.
>
> Hmm, 3.3-rcX seems to be the first version when it started to happen to
> me. I take it that you have seen this also with 3.2? 3.1?
Quote from my very first email:
"I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
running Linux 2.6.37.4."
http://marc.info/?l=linux-kernel&m=130089790801080
With some releases the problem happened not that often.
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 12:58 ` richard -rw- weinberger
@ 2012-03-12 13:03 ` Jiri Kosina
2012-03-12 13:24 ` Andreas Hartmann
2012-03-12 21:38 ` richard -rw- weinberger
0 siblings, 2 replies; 46+ messages in thread
From: Jiri Kosina @ 2012-03-12 13:03 UTC (permalink / raw)
To: richard -rw- weinberger; +Cc: Andreas Hartmann, Rafael J. Wysocki, linux-kernel
On Mon, 12 Mar 2012, richard -rw- weinberger wrote:
> >> > This is happening to me as well. Something like 1 resume out of 5 goes
> >> > wrong this very same way.
> >> >
> >> > This is thinkpad x200s.
> >> >
> >> > All the userspace is segfaulting all over the place (most frequently in
> >> > libselinux for some reason).
> >> >
> >> > I am not able to verify the 'drop_caches' theory, as I can't invoke a
> >> > single command that wouldn't crash.
> >>
> >> The question is how should we proceed?
> >> I've reported this issue one year (!!!) ago.
> >
> > Hmm, 3.3-rcX seems to be the first version when it started to happen to
> > me. I take it that you have seen this also with 3.2? 3.1?
>
> Quote from my very first email:
> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> running Linux 2.6.37.4."
So we both seem to have Lenovos at least. I thus wanted to verify whether
the problem will trigger with thinkpad_acpi removed, but it oopsed while
rmmoding :) I will start looking into this right away.
Is your system using thinkpad_acpi as well?
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 13:03 ` Jiri Kosina
@ 2012-03-12 13:24 ` Andreas Hartmann
2012-03-12 21:49 ` Dave Jones
2012-03-12 21:38 ` richard -rw- weinberger
1 sibling, 1 reply; 46+ messages in thread
From: Andreas Hartmann @ 2012-03-12 13:24 UTC (permalink / raw)
To: Jiri Kosina; +Cc: richard -rw- weinberger, Rafael J. Wysocki, linux-kernel
Jiri Kosina schrieb:
> On Mon, 12 Mar 2012, richard -rw- weinberger wrote:
>
>>>>> This is happening to me as well. Something like 1 resume out of 5 goes
>>>>> wrong this very same way.
>>>>>
>>>>> This is thinkpad x200s.
>>>>>
>>>>> All the userspace is segfaulting all over the place (most frequently in
>>>>> libselinux for some reason).
>>>>>
>>>>> I am not able to verify the 'drop_caches' theory, as I can't invoke a
>>>>> single command that wouldn't crash.
>>>>
>>>> The question is how should we proceed?
>>>> I've reported this issue one year (!!!) ago.
>>>
>>> Hmm, 3.3-rcX seems to be the first version when it started to happen to
>>> me. I take it that you have seen this also with 3.2? 3.1?
>>
>> Quote from my very first email:
>> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>> running Linux 2.6.37.4."
>
> So we both seem to have Lenovos at least. I thus wanted to verify whether
> the problem will trigger with thinkpad_acpi removed, but it oopsed while
> rmmoding :) I will start looking into this right away.
>
> Is your system using thinkpad_acpi as well?
I dont't think, that it is lenovo related as I'm having a MSI machine.
https://bugzilla.novell.com/show_bug.cgi?id=732908
Following the link, you are able to compare the used chips - maybe there
are some equal components?
Regards,
Andreas
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 13:24 ` Andreas Hartmann
@ 2012-03-12 21:49 ` Dave Jones
2012-03-12 21:56 ` richard -rw- weinberger
` (3 more replies)
0 siblings, 4 replies; 46+ messages in thread
From: Dave Jones @ 2012-03-12 21:49 UTC (permalink / raw)
To: Andreas Hartmann
Cc: Jiri Kosina, richard -rw- weinberger, Rafael J. Wysocki,
linux-kernel, keithp
On Mon, Mar 12, 2012 at 02:24:00PM +0100, Andreas Hartmann wrote:
> >>>>> This is happening to me as well. Something like 1 resume out of 5 goes
> >>>>> wrong this very same way.
> >>>>>
> >>>>> This is thinkpad x200s.
> >>>>>
> >>>>> All the userspace is segfaulting all over the place (most frequently in
> >>>>> libselinux for some reason).
> >>>>>
> >>>>> I am not able to verify the 'drop_caches' theory, as I can't invoke a
> >>>>> single command that wouldn't crash.
> >>>>
> >>>> The question is how should we proceed?
> >>>> I've reported this issue one year (!!!) ago.
> >>>
> >>> Hmm, 3.3-rcX seems to be the first version when it started to happen to
> >>> me. I take it that you have seen this also with 3.2? 3.1?
> >>
> >> Quote from my very first email:
> >> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> >> running Linux 2.6.37.4."
> >
> > So we both seem to have Lenovos at least. I thus wanted to verify whether
> > the problem will trigger with thinkpad_acpi removed, but it oopsed while
> > rmmoding :) I will start looking into this right away.
> >
> > Is your system using thinkpad_acpi as well?
>
> I dont't think, that it is lenovo related as I'm having a MSI machine.
>
> https://bugzilla.novell.com/show_bug.cgi?id=732908
>
> Following the link, you are able to compare the used chips - maybe there
> are some equal components?
This looks like the i915 corruption problem mentioned in a few other threads.
if you compare the hexdump of the good/bad files, you find that the corruption
happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
KeithP clued me in last week that that looks like an ARGB pixel quad, so these
writes are likely 8 pixel strips.
Dave
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: Corrupted files after suspend to disk
2012-03-12 21:49 ` Dave Jones
@ 2012-03-12 21:56 ` richard -rw- weinberger
2012-03-13 8:59 ` Andreas Hartmann
` (2 subsequent siblings)
3 siblings, 0 replies; 46+ messages in thread
From: richard -rw- weinberger @ 2012-03-12 21:56 UTC (permalink / raw)
To: Dave Jones, Andreas Hartmann, Jiri Kosina,
richard -rw- weinberger, Rafael J. Wysocki, linux-kernel, keithp
On Mon, Mar 12, 2012 at 10:49 PM, Dave Jones <davej@redhat.com> wrote:
>
> This looks like the i915 corruption problem mentioned in a few other threads.
>
> if you compare the hexdump of the good/bad files, you find that the corruption
> happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
>
This makes sense.
I'll have a look at the pattern next time!
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: Corrupted files after suspend to disk
2012-03-12 21:49 ` Dave Jones
2012-03-12 21:56 ` richard -rw- weinberger
@ 2012-03-13 8:59 ` Andreas Hartmann
2012-03-13 21:52 ` Rafael J. Wysocki
2012-03-16 15:19 ` richard -rw- weinberger
2012-03-28 22:12 ` Jiri Kosina
3 siblings, 1 reply; 46+ messages in thread
From: Andreas Hartmann @ 2012-03-13 8:59 UTC (permalink / raw)
To: Dave Jones, Jiri Kosina, richard -rw- weinberger,
Rafael J. Wysocki, linux-kernel, keithp
Dave Jones wrote:
> On Mon, Mar 12, 2012 at 02:24:00PM +0100, Andreas Hartmann wrote:
>
> > >>>>> This is happening to me as well. Something like 1 resume out of 5 goes
> > >>>>> wrong this very same way.
> > >>>>>
> > >>>>> This is thinkpad x200s.
> > >>>>>
> > >>>>> All the userspace is segfaulting all over the place (most frequently in
> > >>>>> libselinux for some reason).
> > >>>>>
> > >>>>> I am not able to verify the 'drop_caches' theory, as I can't invoke a
> > >>>>> single command that wouldn't crash.
> > >>>>
> > >>>> The question is how should we proceed?
> > >>>> I've reported this issue one year (!!!) ago.
> > >>>
> > >>> Hmm, 3.3-rcX seems to be the first version when it started to happen to
> > >>> me. I take it that you have seen this also with 3.2? 3.1?
> > >>
> > >> Quote from my very first email:
> > >> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> > >> running Linux 2.6.37.4."
> > >
> > > So we both seem to have Lenovos at least. I thus wanted to verify whether
> > > the problem will trigger with thinkpad_acpi removed, but it oopsed while
> > > rmmoding :) I will start looking into this right away.
> > >
> > > Is your system using thinkpad_acpi as well?
> >
> > I dont't think, that it is lenovo related as I'm having a MSI machine.
> >
> > https://bugzilla.novell.com/show_bug.cgi?id=732908
> >
> > Following the link, you are able to compare the used chips - maybe there
> > are some equal components?
>
> This looks like the i915 corruption problem mentioned in a few other threads.
>
> if you compare the hexdump of the good/bad files, you find that the corruption
> happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
>
> KeithP clued me in last week that that looks like an ARGB pixel quad, so these
> writes are likely 8 pixel strips.
Thanks Dave. I disabled i915 (with nomodeset) and voila, the problem
disappears. As I already know, that the problem isn't X-related (I saw
it even without any X involved, only with runlevel 3 and nothing more),
the problem seems to be now narrowed down to the relevant component.
Hoping to get a fix soon,
regards,
Andreas
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-13 8:59 ` Andreas Hartmann
@ 2012-03-13 21:52 ` Rafael J. Wysocki
2012-03-13 22:27 ` Andreas Hartmann
0 siblings, 1 reply; 46+ messages in thread
From: Rafael J. Wysocki @ 2012-03-13 21:52 UTC (permalink / raw)
To: Andreas Hartmann
Cc: Dave Jones, Jiri Kosina, richard -rw- weinberger, linux-kernel, keithp
On Tuesday, March 13, 2012, Andreas Hartmann wrote:
> Dave Jones wrote:
> > On Mon, Mar 12, 2012 at 02:24:00PM +0100, Andreas Hartmann wrote:
> >
> > > >>>>> This is happening to me as well. Something like 1 resume out of 5 goes
> > > >>>>> wrong this very same way.
> > > >>>>>
> > > >>>>> This is thinkpad x200s.
> > > >>>>>
> > > >>>>> All the userspace is segfaulting all over the place (most frequently in
> > > >>>>> libselinux for some reason).
> > > >>>>>
> > > >>>>> I am not able to verify the 'drop_caches' theory, as I can't invoke a
> > > >>>>> single command that wouldn't crash.
> > > >>>>
> > > >>>> The question is how should we proceed?
> > > >>>> I've reported this issue one year (!!!) ago.
> > > >>>
> > > >>> Hmm, 3.3-rcX seems to be the first version when it started to happen to
> > > >>> me. I take it that you have seen this also with 3.2? 3.1?
> > > >>
> > > >> Quote from my very first email:
> > > >> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> > > >> running Linux 2.6.37.4."
> > > >
> > > > So we both seem to have Lenovos at least. I thus wanted to verify whether
> > > > the problem will trigger with thinkpad_acpi removed, but it oopsed while
> > > > rmmoding :) I will start looking into this right away.
> > > >
> > > > Is your system using thinkpad_acpi as well?
> > >
> > > I dont't think, that it is lenovo related as I'm having a MSI machine.
> > >
> > > https://bugzilla.novell.com/show_bug.cgi?id=732908
> > >
> > > Following the link, you are able to compare the used chips - maybe there
> > > are some equal components?
> >
> > This looks like the i915 corruption problem mentioned in a few other threads.
> >
> > if you compare the hexdump of the good/bad files, you find that the corruption
> > happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
> >
> > KeithP clued me in last week that that looks like an ARGB pixel quad, so these
> > writes are likely 8 pixel strips.
>
> Thanks Dave. I disabled i915 (with nomodeset) and voila, the problem
> disappears. As I already know, that the problem isn't X-related (I saw
> it even without any X involved, only with runlevel 3 and nothing more),
> the problem seems to be now narrowed down to the relevant component.
I wonder what's the kernel command line you can reproduce the problem with?
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-13 21:52 ` Rafael J. Wysocki
@ 2012-03-13 22:27 ` Andreas Hartmann
2012-03-14 0:06 ` Rafael J. Wysocki
0 siblings, 1 reply; 46+ messages in thread
From: Andreas Hartmann @ 2012-03-13 22:27 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Dave Jones, Jiri Kosina, richard -rw- weinberger, linux-kernel, keithp
Rafael J. Wysocki schrieb:
> On Tuesday, March 13, 2012, Andreas Hartmann wrote:
>> Dave Jones wrote:
>>> On Mon, Mar 12, 2012 at 02:24:00PM +0100, Andreas Hartmann wrote:
>>>
>>> > >>>>> This is happening to me as well. Something like 1 resume out of 5 goes
>>> > >>>>> wrong this very same way.
>>> > >>>>>
>>> > >>>>> This is thinkpad x200s.
>>> > >>>>>
>>> > >>>>> All the userspace is segfaulting all over the place (most frequently in
>>> > >>>>> libselinux for some reason).
>>> > >>>>>
>>> > >>>>> I am not able to verify the 'drop_caches' theory, as I can't invoke a
>>> > >>>>> single command that wouldn't crash.
>>> > >>>>
>>> > >>>> The question is how should we proceed?
>>> > >>>> I've reported this issue one year (!!!) ago.
>>> > >>>
>>> > >>> Hmm, 3.3-rcX seems to be the first version when it started to happen to
>>> > >>> me. I take it that you have seen this also with 3.2? 3.1?
>>> > >>
>>> > >> Quote from my very first email:
>>> > >> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>>> > >> running Linux 2.6.37.4."
>>> > >
>>> > > So we both seem to have Lenovos at least. I thus wanted to verify whether
>>> > > the problem will trigger with thinkpad_acpi removed, but it oopsed while
>>> > > rmmoding :) I will start looking into this right away.
>>> > >
>>> > > Is your system using thinkpad_acpi as well?
>>> >
>>> > I dont't think, that it is lenovo related as I'm having a MSI machine.
>>> >
>>> > https://bugzilla.novell.com/show_bug.cgi?id=732908
>>> >
>>> > Following the link, you are able to compare the used chips - maybe there
>>> > are some equal components?
>>>
>>> This looks like the i915 corruption problem mentioned in a few other threads.
>>>
>>> if you compare the hexdump of the good/bad files, you find that the corruption
>>> happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
>>>
>>> KeithP clued me in last week that that looks like an ARGB pixel quad, so these
>>> writes are likely 8 pixel strips.
>>
>> Thanks Dave. I disabled i915 (with nomodeset) and voila, the problem
>> disappears. As I already know, that the problem isn't X-related (I saw
>> it even without any X involved, only with runlevel 3 and nothing more),
>> the problem seems to be now narrowed down to the relevant component.
>
> I wonder what's the kernel command line you can reproduce the problem with?
It's the standard kernel command line of openSUSE:
root=/dev/system/root resume=/dev/system/swap splash=silent quiet vga=791 3
I added a complete dmesg output to
https://bugzilla.novell.com/show_bug.cgi?id=732908
Regards,
Andreas Hartmann
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-13 22:27 ` Andreas Hartmann
@ 2012-03-14 0:06 ` Rafael J. Wysocki
2012-03-14 7:05 ` Andreas Hartmann
0 siblings, 1 reply; 46+ messages in thread
From: Rafael J. Wysocki @ 2012-03-14 0:06 UTC (permalink / raw)
To: Andreas Hartmann
Cc: Dave Jones, Jiri Kosina, richard -rw- weinberger, linux-kernel, keithp
On Tuesday, March 13, 2012, Andreas Hartmann wrote:
> Rafael J. Wysocki schrieb:
> > On Tuesday, March 13, 2012, Andreas Hartmann wrote:
> >> Dave Jones wrote:
> >>> On Mon, Mar 12, 2012 at 02:24:00PM +0100, Andreas Hartmann wrote:
> >>>
> >>> > >>>>> This is happening to me as well. Something like 1 resume out of 5 goes
> >>> > >>>>> wrong this very same way.
> >>> > >>>>>
> >>> > >>>>> This is thinkpad x200s.
> >>> > >>>>>
> >>> > >>>>> All the userspace is segfaulting all over the place (most frequently in
> >>> > >>>>> libselinux for some reason).
> >>> > >>>>>
> >>> > >>>>> I am not able to verify the 'drop_caches' theory, as I can't invoke a
> >>> > >>>>> single command that wouldn't crash.
> >>> > >>>>
> >>> > >>>> The question is how should we proceed?
> >>> > >>>> I've reported this issue one year (!!!) ago.
> >>> > >>>
> >>> > >>> Hmm, 3.3-rcX seems to be the first version when it started to happen to
> >>> > >>> me. I take it that you have seen this also with 3.2? 3.1?
> >>> > >>
> >>> > >> Quote from my very first email:
> >>> > >> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
> >>> > >> running Linux 2.6.37.4."
> >>> > >
> >>> > > So we both seem to have Lenovos at least. I thus wanted to verify whether
> >>> > > the problem will trigger with thinkpad_acpi removed, but it oopsed while
> >>> > > rmmoding :) I will start looking into this right away.
> >>> > >
> >>> > > Is your system using thinkpad_acpi as well?
> >>> >
> >>> > I dont't think, that it is lenovo related as I'm having a MSI machine.
> >>> >
> >>> > https://bugzilla.novell.com/show_bug.cgi?id=732908
> >>> >
> >>> > Following the link, you are able to compare the used chips - maybe there
> >>> > are some equal components?
> >>>
> >>> This looks like the i915 corruption problem mentioned in a few other threads.
> >>>
> >>> if you compare the hexdump of the good/bad files, you find that the corruption
> >>> happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
> >>>
> >>> KeithP clued me in last week that that looks like an ARGB pixel quad, so these
> >>> writes are likely 8 pixel strips.
> >>
> >> Thanks Dave. I disabled i915 (with nomodeset) and voila, the problem
> >> disappears. As I already know, that the problem isn't X-related (I saw
> >> it even without any X involved, only with runlevel 3 and nothing more),
> >> the problem seems to be now narrowed down to the relevant component.
> >
> > I wonder what's the kernel command line you can reproduce the problem with?
>
> It's the standard kernel command line of openSUSE:
> root=/dev/system/root resume=/dev/system/swap splash=silent quiet vga=791 3
Is it reproducible with vga=0 (or no vga= option at all)?
Rafael
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-14 0:06 ` Rafael J. Wysocki
@ 2012-03-14 7:05 ` Andreas Hartmann
0 siblings, 0 replies; 46+ messages in thread
From: Andreas Hartmann @ 2012-03-14 7:05 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Dave Jones, Jiri Kosina, richard -rw- weinberger, linux-kernel, keithp
Rafael J. Wysocki wrote:
> On Tuesday, March 13, 2012, Andreas Hartmann wrote:
>> Rafael J. Wysocki schrieb:
>>> On Tuesday, March 13, 2012, Andreas Hartmann wrote:
>>>> Dave Jones wrote:
>>>>> On Mon, Mar 12, 2012 at 02:24:00PM +0100, Andreas Hartmann wrote:
>>>>>
>>>>> > >>>>> This is happening to me as well. Something like 1 resume out of 5 goes
>>>>> > >>>>> wrong this very same way.
>>>>> > >>>>>
>>>>> > >>>>> This is thinkpad x200s.
>>>>> > >>>>>
>>>>> > >>>>> All the userspace is segfaulting all over the place (most frequently in
>>>>> > >>>>> libselinux for some reason).
>>>>> > >>>>>
>>>>> > >>>>> I am not able to verify the 'drop_caches' theory, as I can't invoke a
>>>>> > >>>>> single command that wouldn't crash.
>>>>> > >>>>
>>>>> > >>>> The question is how should we proceed?
>>>>> > >>>> I've reported this issue one year (!!!) ago.
>>>>> > >>>
>>>>> > >>> Hmm, 3.3-rcX seems to be the first version when it started to happen to
>>>>> > >>> me. I take it that you have seen this also with 3.2? 3.1?
>>>>> > >>
>>>>> > >> Quote from my very first email:
>>>>> > >> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>>>>> > >> running Linux 2.6.37.4."
>>>>> > >
>>>>> > > So we both seem to have Lenovos at least. I thus wanted to verify whether
>>>>> > > the problem will trigger with thinkpad_acpi removed, but it oopsed while
>>>>> > > rmmoding :) I will start looking into this right away.
>>>>> > >
>>>>> > > Is your system using thinkpad_acpi as well?
>>>>> >
>>>>> > I dont't think, that it is lenovo related as I'm having a MSI machine.
>>>>> >
>>>>> > https://bugzilla.novell.com/show_bug.cgi?id=732908
>>>>> >
>>>>> > Following the link, you are able to compare the used chips - maybe there
>>>>> > are some equal components?
>>>>>
>>>>> This looks like the i915 corruption problem mentioned in a few other threads.
>>>>>
>>>>> if you compare the hexdump of the good/bad files, you find that the corruption
>>>>> happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
>>>>>
>>>>> KeithP clued me in last week that that looks like an ARGB pixel quad, so these
>>>>> writes are likely 8 pixel strips.
>>>>
>>>> Thanks Dave. I disabled i915 (with nomodeset) and voila, the problem
>>>> disappears. As I already know, that the problem isn't X-related (I saw
>>>> it even without any X involved, only with runlevel 3 and nothing more),
>>>> the problem seems to be now narrowed down to the relevant component.
>>>
>>> I wonder what's the kernel command line you can reproduce the problem with?
>>
>> It's the standard kernel command line of openSUSE:
>> root=/dev/system/root resume=/dev/system/swap splash=silent quiet vga=791 3
>
> Is it reproducible with vga=0 (or no vga= option at all)?
It's reproducible with both options (vga=0 and no vga option at all).
Andreas
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 21:49 ` Dave Jones
2012-03-12 21:56 ` richard -rw- weinberger
2012-03-13 8:59 ` Andreas Hartmann
@ 2012-03-16 15:19 ` richard -rw- weinberger
2012-03-28 22:12 ` Jiri Kosina
3 siblings, 0 replies; 46+ messages in thread
From: richard -rw- weinberger @ 2012-03-16 15:19 UTC (permalink / raw)
To: Dave Jones, Andreas Hartmann, Jiri Kosina,
richard -rw- weinberger, Rafael J. Wysocki, linux-kernel, keithp
[-- Attachment #1: Type: text/plain, Size: 345 bytes --]
On Mon, Mar 12, 2012 at 10:49 PM, Dave Jones <davej@redhat.com> wrote:
> if you compare the hexdump of the good/bad files, you find that the corruption
> happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
Yeah, it looks like the described pattern.
The attached diff shows four 8x4 byte writes of 0x00000000.
--
Thanks,
//richard
[-- Attachment #2: hexdump.diff --]
[-- Type: text/x-patch, Size: 3093 bytes --]
--- good.txt 2012-03-16 15:51:11.000000000 +0100
+++ bad.txt 2012-03-16 15:51:27.000000000 +0100
@@ -111020,8 +111020,8 @@
001b3fd0 85 73 01 00 00 89 3c 24 e8 d3 01 02 00 8b 8c 24 |.s....<$.......$|
001b3fe0 e0 00 00 00 8b 94 24 e4 00 00 00 8b b4 24 e0 00 |......$......$..|
001b3ff0 00 00 8b 41 24 8b 52 08 83 c6 24 8b 48 0c 89 54 |...A$.R...$.H..T|
-001b4000 24 24 85 c9 0f 85 06 01 00 00 31 c0 8b 8c 24 e4 |$$........1...$.|
-001b4010 00 00 00 89 04 24 89 4c 24 04 e8 41 e9 ff ff 85 |.....$.L$..A....|
+001b4000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
+*
001b4020 ed 74 45 8b 54 24 24 8b 42 4c 8b 50 3c 85 d2 0f |.tE.T$$.BL.P<...|
001b4030 85 43 01 00 00 c7 44 24 04 00 00 00 00 89 2c 24 |.C....D$......,$|
001b4040 e8 ab a4 ef ff 8b 94 24 e4 00 00 00 c7 44 24 0c |.......$.....D$.|
@@ -111276,8 +111276,8 @@
001b4fd0 c3 25 30 0c 00 8b 50 44 f6 c2 10 0f 84 e7 00 00 |.%0...PD........|
001b4fe0 00 8d 83 6c cd fa ff 8d 7c 24 3c 89 44 24 14 8d |...l....|$<.D$..|
001b4ff0 83 54 43 f9 ff 89 44 24 0c c7 44 24 10 5e 01 00 |.TC...D$..D$.^..|
-001b5000 00 c7 44 24 08 5f 1b 00 00 c7 44 24 04 01 00 00 |..D$._....D$....|
-001b5010 00 89 3c 24 e8 4b 72 ec ff 83 ec 04 8d 54 24 38 |..<$.Kr......T$8|
+001b5000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
+*
001b5020 89 14 24 89 54 24 2c 89 74 24 08 89 7c 24 04 e8 |..$.T$,.t$..|$..|
001b5030 10 2b ec ff 8d 83 8c 23 f9 ff 83 ec 04 8d 6c 24 |.+.....#......l$|
001b5040 34 89 44 24 04 c7 44 24 08 ff ff ff ff 89 2c 24 |4.D$..D$......,$|
@@ -112044,8 +112044,8 @@
001b7fd0 8b 50 08 8d 44 90 14 89 04 24 eb 83 8d 74 26 00 |.P..D....$...t&.|
001b7fe0 83 ec 5c 89 74 24 50 8b 74 24 60 89 5c 24 4c 89 |..\.t$P.t$`.\$L.|
001b7ff0 7c 24 54 89 6c 24 58 8b 46 14 e8 e8 80 ec ff 81 ||$T.l$X.F.......|
-001b8000 c3 f5 ff 0b 00 8b 50 08 39 50 0c 0f 84 ab 00 00 |......P.9P......|
-001b8010 00 8d 6c 24 20 89 74 24 04 89 2c 24 e8 9f fd ff |..l$ .t$..,$....|
+001b8000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
+*
001b8020 ff 83 ec 04 8b 7c 24 20 85 ff 0f 88 a0 00 00 00 |.....|$ ........|
001b8030 8b 4c 24 24 85 c9 0f 88 94 00 00 00 8b 54 24 2c |.L$$.........T$,|
001b8040 85 d2 0f 84 88 00 00 00 8d 7c 24 3c 89 6c 24 04 |.........|$<.l$.|
@@ -112300,8 +112300,8 @@
001b8fd0 0b 00 89 6c 24 58 89 74 24 50 8b 74 24 60 89 7c |...l$X.t$P.t$`.||
001b8fe0 24 54 c7 44 24 3c 00 00 00 00 8b ab 40 27 00 00 |$T.D$<......@'..|
001b8ff0 85 ed 0f 84 30 01 00 00 8b bb 40 27 00 00 83 c7 |....0.....@'....|
-001b9000 04 74 08 f7 c7 01 00 00 00 74 35 89 f0 e8 fe f4 |.t.......t5.....|
-001b9010 ff ff 85 c0 89 44 24 3c 74 45 85 ff 74 0c f7 c7 |.....D$<tE..t...|
+001b9000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
+*
001b9020 01 00 00 00 0f 85 e6 00 00 00 8b 5c 24 4c 8b 74 |...........\$L.t|
001b9030 24 50 8b 7c 24 54 8b 6c 24 58 83 c4 5c c3 66 90 |$P.|$T.l$X..\.f.|
001b9040 89 f8 83 cf 01 83 e0 fe 89 04 24 e8 54 59 ec ff |..........$.TY..|
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 21:49 ` Dave Jones
` (2 preceding siblings ...)
2012-03-16 15:19 ` richard -rw- weinberger
@ 2012-03-28 22:12 ` Jiri Kosina
2012-03-28 22:18 ` Dave Jones
2012-03-28 22:49 ` Keith Packard
3 siblings, 2 replies; 46+ messages in thread
From: Jiri Kosina @ 2012-03-28 22:12 UTC (permalink / raw)
To: Dave Jones
Cc: Andreas Hartmann, richard -rw- weinberger, Rafael J. Wysocki,
linux-kernel, keithp
On Mon, 12 Mar 2012, Dave Jones wrote:
> > https://bugzilla.novell.com/show_bug.cgi?id=732908
> >
> > Following the link, you are able to compare the used chips - maybe there
> > are some equal components?
>
> This looks like the i915 corruption problem mentioned in a few other threads.
>
> if you compare the hexdump of the good/bad files, you find that the corruption
> happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
>
> KeithP clued me in last week that that looks like an ARGB pixel quad, so these
> writes are likely 8 pixel strips.
So this keeps happening to me on almost every resume still ... Keith, is
there any way I could help you debug this?
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: Corrupted files after suspend to disk
2012-03-28 22:12 ` Jiri Kosina
@ 2012-03-28 22:18 ` Dave Jones
2012-03-28 22:49 ` Keith Packard
1 sibling, 0 replies; 46+ messages in thread
From: Dave Jones @ 2012-03-28 22:18 UTC (permalink / raw)
To: Jiri Kosina
Cc: Andreas Hartmann, richard -rw- weinberger, Rafael J. Wysocki,
linux-kernel, keithp, airlied
On Thu, Mar 29, 2012 at 12:12:53AM +0200, Jiri Kosina wrote:
> On Mon, 12 Mar 2012, Dave Jones wrote:
>
> > > https://bugzilla.novell.com/show_bug.cgi?id=732908
> > >
> > > Following the link, you are able to compare the used chips - maybe there
> > > are some equal components?
> >
> > This looks like the i915 corruption problem mentioned in a few other threads.
> >
> > if you compare the hexdump of the good/bad files, you find that the corruption
> > happens in 8x 4 byte writes of either 0x00000000 or 0x00aaaaaa.
> >
> > KeithP clued me in last week that that looks like an ARGB pixel quad, so these
> > writes are likely 8 pixel strips.
>
> So this keeps happening to me on almost every resume still ... Keith, is
> there any way I could help you debug this?
Try this https://bugzilla.kernel.org/attachment.cgi?id=72739
Dave
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-28 22:12 ` Jiri Kosina
2012-03-28 22:18 ` Dave Jones
@ 2012-03-28 22:49 ` Keith Packard
2012-03-29 15:23 ` Jiri Kosina
1 sibling, 1 reply; 46+ messages in thread
From: Keith Packard @ 2012-03-28 22:49 UTC (permalink / raw)
To: Jiri Kosina, Dave Jones
Cc: Andreas Hartmann, richard -rw- weinberger, Rafael J. Wysocki,
linux-kernel
<#part sign=pgpmime>
On Thu, 29 Mar 2012 00:12:53 +0200 (CEST), Jiri Kosina <jkosina@suse.cz> wrote:
> So this keeps happening to me on almost every resume still ... Keith, is
> there any way I could help you debug this?
Let me know what you find with Dave's patch -- it's the most promising
lead we've had. We've had no luck reproducing this at Intel, though a
couple of engineers have been trying to make it happen for several days
now...
--
keith.packard@intel.com
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-28 22:49 ` Keith Packard
@ 2012-03-29 15:23 ` Jiri Kosina
2012-03-31 20:21 ` Jiri Kosina
0 siblings, 1 reply; 46+ messages in thread
From: Jiri Kosina @ 2012-03-29 15:23 UTC (permalink / raw)
To: Keith Packard
Cc: Dave Jones, Andreas Hartmann, richard -rw- weinberger,
Rafael J. Wysocki, linux-kernel
On Wed, 28 Mar 2012, Keith Packard wrote:
> > So this keeps happening to me on almost every resume still ... Keith, is
> > there any way I could help you debug this?
>
> Let me know what you find with Dave's patch -- it's the most promising
> lead we've had. We've had no luck reproducing this at Intel, though a
> couple of engineers have been trying to make it happen for several days
> now...
Running with it now, will let you know in a couple of days to be
reasonably certain about the outcome.
Thanks,
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-29 15:23 ` Jiri Kosina
@ 2012-03-31 20:21 ` Jiri Kosina
0 siblings, 0 replies; 46+ messages in thread
From: Jiri Kosina @ 2012-03-31 20:21 UTC (permalink / raw)
To: Keith Packard
Cc: Dave Jones, Andreas Hartmann, richard -rw- weinberger,
Rafael J. Wysocki, linux-kernel
On Thu, 29 Mar 2012, Jiri Kosina wrote:
> > > So this keeps happening to me on almost every resume still ... Keith, is
> > > there any way I could help you debug this?
> >
> > Let me know what you find with Dave's patch -- it's the most promising
> > lead we've had. We've had no luck reproducing this at Intel, though a
> > couple of engineers have been trying to make it happen for several days
> > now...
>
> Running with it now, will let you know in a couple of days to be
> reasonably certain about the outcome.
Okay, it seems to fix the issues I have been seeing on my system.
FWIW,
Tested-by: Jiri Kosina <jkosina@suse.cz>
Thanks,
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 13:03 ` Jiri Kosina
2012-03-12 13:24 ` Andreas Hartmann
@ 2012-03-12 21:38 ` richard -rw- weinberger
1 sibling, 0 replies; 46+ messages in thread
From: richard -rw- weinberger @ 2012-03-12 21:38 UTC (permalink / raw)
To: Jiri Kosina; +Cc: Andreas Hartmann, Rafael J. Wysocki, linux-kernel
On Mon, Mar 12, 2012 at 2:03 PM, Jiri Kosina <jkosina@suse.cz> wrote:
> On Mon, 12 Mar 2012, richard -rw- weinberger wrote:
>
>> >> > This is happening to me as well. Something like 1 resume out of 5 goes
>> >> > wrong this very same way.
>> >> >
>> >> > This is thinkpad x200s.
>> >> >
>> >> > All the userspace is segfaulting all over the place (most frequently in
>> >> > libselinux for some reason).
>> >> >
>> >> > I am not able to verify the 'drop_caches' theory, as I can't invoke a
>> >> > single command that wouldn't crash.
>> >>
>> >> The question is how should we proceed?
>> >> I've reported this issue one year (!!!) ago.
>> >
>> > Hmm, 3.3-rcX seems to be the first version when it started to happen to
>> > me. I take it that you have seen this also with 3.2? 3.1?
>>
>> Quote from my very first email:
>> "I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>> running Linux 2.6.37.4."
>
> So we both seem to have Lenovos at least. I thus wanted to verify whether
> the problem will trigger with thinkpad_acpi removed, but it oopsed while
> rmmoding :) I will start looking into this right away.
>
> Is your system using thinkpad_acpi as well?
Yes.
But I don't think that the issue is related to it.
Because Andreas doesn't have a Thinkpad.
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-03-12 12:03 ` Jiri Kosina
2012-03-12 12:23 ` richard -rw- weinberger
@ 2012-03-12 13:36 ` Andreas Hartmann
1 sibling, 0 replies; 46+ messages in thread
From: Andreas Hartmann @ 2012-03-12 13:36 UTC (permalink / raw)
To: Jiri Kosina; +Cc: richard -rw- weinberger, Rafael J. Wysocki, linux-kernel
Jiri Kosina schrieb:
> On Wed, 7 Mar 2012, Andreas Hartmann wrote:
>
>>> On my system kernel suspend *seems* to work.
>>> I've seen no corrupted files so far.
>>>
>>> But sometimes the resume is failing. (One out of 5 resumes fails).
>>> I was unable to get any kernel output.
>>>
>>> So I'm not sure whether this is the same issue
>>> or another one. :-\
>>
>> I'm pretty sure that this is the same issue. What you are telling
>> correlates with my research here.
>> I even got resumes where the machine came up again, but nothing could be
>> done (it wasn't possible to switch of the password secured screen saver
>> any more - login at the shell wasn't possible, too, because the started
>> bash crashed),
>
> This is happening to me as well. Something like 1 resume out of 5 goes
> wrong this very same way.
>
> This is thinkpad x200s.
>
> All the userspace is segfaulting all over the place (most frequently in
> libselinux for some reason).
>
> I am not able to verify the 'drop_caches' theory, as I can't invoke a
> single command that wouldn't crash.
I'm checking after every resume for broken files (via md5sum check). If
you are lucky, only irrelevant files are damaged.
But you are right, with 3.2 (or was it 3.3?), the drop_caches theory
doesn't work at all for me (if it isn't by chance).
Regards,
Andreas
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-02-16 16:30 ` Dave Jones
2012-02-16 21:51 ` Rafael J. Wysocki
@ 2012-02-16 23:27 ` Eric Sandeen
2012-02-16 23:37 ` richard -rw- weinberger
1 sibling, 1 reply; 46+ messages in thread
From: Eric Sandeen @ 2012-02-16 23:27 UTC (permalink / raw)
To: Dave Jones, richard -rw- weinberger, Rafael J. Wysocki, LKML,
linux-pm, esandeen
On 2/16/12 8:30 AM, Dave Jones wrote:
> On Thu, Feb 16, 2012 at 11:52:27AM +0100, richard -rw- weinberger wrote:
>
> > >> >> Of course, please test the above separately. :-)
> > >> >
> > >> > Ok, I'll test this when I'm at home.
> > >> >
> > >> > BTW: dropping the caches helps, when some files seem corrupted.
> > >> > Today /usr/bin/okular was broken.
> > >> > After setting vm.drop_caches=1 it worked again.
> > >>
> > >> On Linux 2.6.38 I'm unable to reproduce the issue.
> > >> Only 2.6.37 seems to be affected.
> > >> So, I'm moving over to 2.6.38. :)
> > >
> > Bad news:
> > I saw the issue on 3.x too but thought it's because my IdeaPad s10 is crap.
> > Now with my shiny new Lenovo x121e I have the same issue! :-(
> >
> > OpenSUSE 12.1, kernel 3.2.7.
> > After a few suspend2disk iterations random files are corrupted.
> > But only cached files. A reboot solves the problem.
Just to be clear - you see _data_ corruption in files, but only
until a reboot, and after that they are ok? Ok, reading above
about using drop_caches that sounds like the case.
That sounds different from what I saw in the bug Dave mentions
below, but possibly related root cause, I suppose.
-Eric
> FWIW, we've been seeing a number of hard to diagnose failures
> with suspend to disk for the last few releases in Fedora.
> Eric Sandeen has been chasing https://bugzilla.redhat.com/show_bug.cgi?id=744275
> for a while, but there's no smoking gun that really explains what's
> getting into these states. Further complicating things, is that it
> doesn't seem to be 100% reproducable.
>
> Dave
>
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2012-02-16 23:27 ` Eric Sandeen
@ 2012-02-16 23:37 ` richard -rw- weinberger
0 siblings, 0 replies; 46+ messages in thread
From: richard -rw- weinberger @ 2012-02-16 23:37 UTC (permalink / raw)
To: Eric Sandeen; +Cc: Dave Jones, Rafael J. Wysocki, LKML, linux-pm, esandeen
On Fri, Feb 17, 2012 at 12:27 AM, Eric Sandeen <sandeen@redhat.com> wrote:
> On 2/16/12 8:30 AM, Dave Jones wrote:
>> On Thu, Feb 16, 2012 at 11:52:27AM +0100, richard -rw- weinberger wrote:
>>
>> > >> >> Of course, please test the above separately. :-)
>> > >> >
>> > >> > Ok, I'll test this when I'm at home.
>> > >> >
>> > >> > BTW: dropping the caches helps, when some files seem corrupted.
>> > >> > Today /usr/bin/okular was broken.
>> > >> > After setting vm.drop_caches=1 it worked again.
>> > >>
>> > >> On Linux 2.6.38 I'm unable to reproduce the issue.
>> > >> Only 2.6.37 seems to be affected.
>> > >> So, I'm moving over to 2.6.38. :)
>> > >
>> > Bad news:
>> > I saw the issue on 3.x too but thought it's because my IdeaPad s10 is crap.
>> > Now with my shiny new Lenovo x121e I have the same issue! :-(
>> >
>> > OpenSUSE 12.1, kernel 3.2.7.
>> > After a few suspend2disk iterations random files are corrupted.
>> > But only cached files. A reboot solves the problem.
>
> Just to be clear - you see _data_ corruption in files, but only
> until a reboot, and after that they are ok? Ok, reading above
> about using drop_caches that sounds like the case.
Yes.
A reboot always solved the data corruption.
drop_caches solved it in 99% of all cases.
On-disk data was never corrupted.
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: Corrupted files after suspend to disk
2011-03-23 22:11 ` Rafael J. Wysocki
2011-03-23 22:16 ` richard -rw- weinberger
@ 2011-03-23 22:33 ` richard -rw- weinberger
1 sibling, 0 replies; 46+ messages in thread
From: richard -rw- weinberger @ 2011-03-23 22:33 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: LKML, linux-pm
On Wed, Mar 23, 2011 at 11:11 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> 2011/3/23 Rafael J. Wysocki <rjw@sisk.pl>:
>> > On Wednesday, March 23, 2011, richard -rw- weinberger wrote:
>> >> Hi,
>> >>
>> >> I'm facing a very strange problem on my netbook (Lenovo Ideapad S10)
>> >> running Linux 2.6.37.4.
>> >> After resuming from s2disk some files are corrupted.
>> >> But when I reboot my netbook everything seems good again.
>> >>
>> >> When I saw the problem the first time the ls command segfaulted always.
>> >> I did a reboot and it worked again.
>> >>
>> >> A few days later zypper crashed. After a reboot it worked again.
>> >> And today ssh crashed. I looked a bit closer and saw it crashed
>> >> somewhere within libcrypto.
>> >> So I made copy libcrypto and rebooted.
>> >> After the reboot ssh worked again but libcrypto and the copy of it hat
>> >> a different sha1 sum!
>> >> WTF?!
>> >>
>> >> Is this a known issue?
>> >
>> > No.
>> >
>> >> dmesgs and config are attached.
>> >>
>> >> The used distribution is openSUSE 11.4 with suspend-0.80.20100129-7.1
>> >> (default from suse).
>> >> I'm using ext3 as root filesystem.
>> >> What else do you need?
>> >
>> > Whatever you can do to narrow down the problem. At the moment I only know
>> > that it's there.
>>
>> I can reproduce the problem now.
>> After ~20 suspend and resume iterations aide finds corrupted files in /lib/.
>> It's always a very basic lib like libcrypto, libglib which is used all
>> the time on my system.
>
> Those files are never intentionally modified, right?
Sorry, I've overlooked this question.
Yes, they have never been modified.
I've double checked it.
>> Maybe it's an issue like this one?
>> https://lkml.org/lkml/2010/12/2/339
>
> It might have if that patch hadn't been merged before 2.6.37.
>
> Is the system 32-bit or 64-bit?
>
> Rafael
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2012-03-31 20:21 UTC | newest]
Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-03-23 16:31 Corrupted files after suspend to disk richard -rw- weinberger
2011-03-23 20:36 ` Rafael J. Wysocki
2011-03-23 21:49 ` richard -rw- weinberger
2011-03-23 22:11 ` Rafael J. Wysocki
2011-03-23 22:16 ` richard -rw- weinberger
2011-03-23 22:22 ` Rafael J. Wysocki
2011-03-23 22:30 ` richard -rw- weinberger
2011-03-23 23:00 ` Rafael J. Wysocki
2011-03-24 10:16 ` richard -rw- weinberger
2011-03-24 19:37 ` richard -rw- weinberger
2011-03-24 22:30 ` Rafael J. Wysocki
2012-02-16 10:52 ` richard -rw- weinberger
2012-02-16 16:30 ` Dave Jones
2012-02-16 21:51 ` Rafael J. Wysocki
2012-02-16 22:26 ` [linux-pm] " Alan Stern
2012-02-16 23:07 ` richard -rw- weinberger
2012-02-16 23:16 ` Rafael J. Wysocki
2012-02-16 23:22 ` richard -rw- weinberger
2012-03-06 20:03 ` Andreas Hartmann
2012-03-06 23:54 ` Andreas Hartmann
2012-03-07 10:27 ` richard -rw- weinberger
2012-03-07 11:05 ` Andreas Hartmann
2012-03-12 12:03 ` Jiri Kosina
2012-03-12 12:23 ` richard -rw- weinberger
2012-03-12 12:30 ` Jiri Kosina
2012-03-12 12:58 ` richard -rw- weinberger
2012-03-12 13:03 ` Jiri Kosina
2012-03-12 13:24 ` Andreas Hartmann
2012-03-12 21:49 ` Dave Jones
2012-03-12 21:56 ` richard -rw- weinberger
2012-03-13 8:59 ` Andreas Hartmann
2012-03-13 21:52 ` Rafael J. Wysocki
2012-03-13 22:27 ` Andreas Hartmann
2012-03-14 0:06 ` Rafael J. Wysocki
2012-03-14 7:05 ` Andreas Hartmann
2012-03-16 15:19 ` richard -rw- weinberger
2012-03-28 22:12 ` Jiri Kosina
2012-03-28 22:18 ` Dave Jones
2012-03-28 22:49 ` Keith Packard
2012-03-29 15:23 ` Jiri Kosina
2012-03-31 20:21 ` Jiri Kosina
2012-03-12 21:38 ` richard -rw- weinberger
2012-03-12 13:36 ` Andreas Hartmann
2012-02-16 23:27 ` Eric Sandeen
2012-02-16 23:37 ` richard -rw- weinberger
2011-03-23 22:33 ` richard -rw- weinberger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).