[00/28] 3.2.7-stable review

[00/28] 3.2.7-stable review

[Greg KH]

This is the start of the stable review cycle for the 3.2.7 release.
There are 28 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Feb 19 00:55:33 UTC 2012.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.2.7-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
 Makefile                                       |    4 +-
 arch/x86/pci/xen.c                             |    2 +-
 crypto/sha512_generic.c                        |   70 ++++++------
 drivers/gpu/drm/i915/intel_dp.c                |   20 +---
 drivers/gpu/drm/i915/intel_lvds.c              |    8 ++
 drivers/hwmon/f75375s.c                        |    4 +-
 drivers/mmc/host/atmel-mci.c                   |    3 +
 drivers/mmc/host/dw_mmc.c                      |  144 ++++++++++++-----------
 drivers/net/ethernet/intel/igb/igb_main.c      |    3 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |    3 +-
 drivers/net/ethernet/toshiba/Kconfig           |    2 +-
 drivers/net/wireless/ath/ath9k/hw.c            |    7 +-
 drivers/net/wireless/ath/ath9k/init.c          |    9 +-
 drivers/net/wireless/ath/ath9k/recv.c          |    8 ++
 fs/cifs/connect.c                              |    7 +-
 fs/cifs/dir.c                                  |    2 +-
 fs/fs-writeback.c                              |   16 ++--
 include/linux/mmc/dw_mmc.h                     |    6 +-
 include/linux/proportions.h                    |    4 +
 include/trace/events/writeback.h               |    7 +-
 kernel/relay.c                                 |   10 ++-
 mm/backing-dev.c                               |   25 +++-
 net/mac80211/rx.c                              |    2 +-
 sound/pci/hda/patch_realtek.c                  |   23 ++++
 sound/pci/hda/patch_via.c                      |    3 +
 sound/pci/intel8x0.c                           |    6 +
 tools/perf/bench/mem-memcpy-x86-64-asm.S       |    6 +
 tools/perf/util/evsel.c                        |    1 +
 28 files changed, 245 insertions(+), 160 deletions(-)

[01/28] ixgbe: fix vf lookup

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Rose <gregory.v.rose@intel.com>

commit a4b08329c74985e5cc3a44b6d2b2c59444ed8079 upstream.

Recent addition of code to find already allocated VFs failed to take
account that systems with 2 or more multi-port SR-IOV capable controllers
might have already enabled VFs.  Make sure that the VFs the function is
finding are actually subordinate to the particular instance of the adapter
that is looking for them and not subordinate to some device that has
previously enabled SR-IOV.

This bug exists in 3.2 stable as well as 3.3 release candidates.

Reported-by: David Ahern <daahern@cisco.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -67,7 +67,8 @@ static int ixgbe_find_enabled_vfs(struct
 	vf_devfn = pdev->devfn + 0x80;
 	pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL);
 	while (pvfdev) {
-		if (pvfdev->devfn == vf_devfn)
+		if (pvfdev->devfn == vf_devfn &&
+		    (pvfdev->bus->number >= pdev->bus->number))
 			vfs_found++;
 		vf_devfn += 2;
 		pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID,

[02/28] igb: fix vf lookup

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Rose <gregory.v.rose@intel.com>

commit 0629292117572a60465f38cdedde2f8164c3df0b upstream.

Recent addition of code to find already allocated VFs failed to take
account that systems with 2 or more multi-port SR-IOV capable controllers
might have already enabled VFs.  Make sure that the VFs the function is
finding are actually subordinate to the particular instance of the adapter
that is looking for them and not subordinate to some device that has
previously enabled SR-IOV.

This is applicable to 3.2+ kernels.

Reported-by: David Ahern <daahern@cisco.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/intel/igb/igb_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4965,7 +4965,8 @@ static int igb_find_enabled_vfs(struct i
 	vf_devfn = pdev->devfn + 0x80;
 	pvfdev = pci_get_device(hw->vendor_id, device_id, NULL);
 	while (pvfdev) {
-		if (pvfdev->devfn == vf_devfn)
+		if (pvfdev->devfn == vf_devfn &&
+		    (pvfdev->bus->number >= pdev->bus->number))
 			vfs_found++;
 		vf_devfn += vf_stride;
 		pvfdev = pci_get_device(hw->vendor_id,

[03/28] perf evsel: Fix an issue where perf report fails to show the proper percentage

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>

commit a4a03fc7ef89020baca4f19174e6a43767c6d78a upstream.

This patch fixes an issue where perf report shows nan% for certain
perf.data files. The below is from a report for a do_fork probe:

   -nan%           sshd  [kernel.kallsyms]  [k] do_fork
   -nan%    packagekitd  [kernel.kallsyms]  [k] do_fork
   -nan%    dbus-daemon  [kernel.kallsyms]  [k] do_fork
   -nan%           bash  [kernel.kallsyms]  [k] do_fork

A git bisect shows commit f3bda2c as the cause. However, looking back
through the git history, I saw commit 640c03c which seems to have
removed the required initialization for perf_sample->period. The problem
only started showing after commit f3bda2c. The below patch re-introduces
the initialization and it fixes the problem for me.

With the below patch, for the same perf.data:

  73.08%             bash  [kernel.kallsyms]  [k] do_fork
   8.97%      11-dhclient  [kernel.kallsyms]  [k] do_fork
   6.41%             sshd  [kernel.kallsyms]  [k] do_fork
   3.85%        20-chrony  [kernel.kallsyms]  [k] do_fork
   2.56%         sendmail  [kernel.kallsyms]  [k] do_fork

This patch applies over current linux-tip commit 9949284.

Problem introduced in:

$ git describe 640c03c
v2.6.37-rc3-83-g640c03c

Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120203170113.5190.25558.stgit@localhost6.localdomain6
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/evsel.c |    1 +
 1 file changed, 1 insertion(+)

--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -390,6 +390,7 @@ int perf_event__parse_sample(const union
 
 	data->cpu = data->pid = data->tid = -1;
 	data->stream_id = data->id = data->time = -1ULL;
+	data->period = 1;
 
 	if (event->header.type != PERF_RECORD_SAMPLE) {
 		if (!sample_id_all)

[04/28] perf tools: Fix perf stack to non executable on x86_64

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <jolsa@redhat.com>

commit 7a0153ee15575a4d07b5da8c96b79e0b0fd41a12 upstream.

By adding following objects:
  bench/mem-memcpy-x86-64-asm.o
the x86_64 perf binary ended up with executable stack.

The reason was that above object are assembler sourced and is missing the
GNU-stack note section. In such case the linker assumes that the final binary
should not be restricted at all and mark the stack as RWX.

Adding section ".note.GNU-stack" definition to mentioned object, with all
flags disabled, thus omiting this object from linker stack flags decision.

Problem introduced in:

  $ git describe ea7872b
  v2.6.37-rc2-19-gea7872b

Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=783570
Reported-by: Clark Williams <williams@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328100848-5630-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ committer note: Backported fix to perf/urgent (3.3-rc2+) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/bench/mem-memcpy-x86-64-asm.S |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/tools/perf/bench/mem-memcpy-x86-64-asm.S
+++ b/tools/perf/bench/mem-memcpy-x86-64-asm.S
@@ -1,2 +1,8 @@
 
 #include "../../../arch/x86/lib/memcpy_64.S"
+/*
+ * We need to provide note.GNU-stack section, saying that we want
+ * NOT executable stack. Otherwise the final linking will assume that
+ * the ELF stack should not be restricted at all and set it RWX.
+ */
+.section .note.GNU-stack,"",@progbits

[05/28] drm/i915: Force explicit bpp selection for intel_dp_link_required

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keith Packard <keithp@keithp.com>

commit c898261c0dad617f0f1080bedc02d507a2fcfb92 upstream.

It is never correct to use intel_crtc->bpp in intel_dp_link_required,
so instead pass an explicit bpp in to this function. This patch
only supports 18bpp and 24bpp modes, which means that 10bpc modes will
be computed incorrectly. Fixing that will require more extensive
changes, and so must be addressed separately from this bugfix.

intel_dp_link_required is called from intel_dp_mode_valid and
intel_dp_mode_fixup.

* intel_dp_mode_valid is called to list supported modes; in this case,
  the current crtc values cannot be relevant as the modes in question
  may never be selected. Thus, using intel_crtc->bpp is never right.

* intel_dp_mode_fixup is called during mode setting, but it is run
  well before ironlake_crtc_mode_set is called to set intel_crtc->bpp,
  so using intel_crtc-bpp in this path can only ever get a stale
  value.

Cc: Lubos Kolouch <lubos.kolouch@gmail.com>
Cc: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42263
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44881
Tested-by: Dave Airlie <airlied@redhat.com>
Tested-by: camalot@picnicpark.org (Dell Latitude 6510)
Tested-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_dp.c |   20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -208,17 +208,8 @@ intel_dp_link_clock(uint8_t link_bw)
  */
 
 static int
-intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock, int check_bpp)
+intel_dp_link_required(int pixel_clock, int bpp)
 {
-	struct drm_crtc *crtc = intel_dp->base.base.crtc;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int bpp = 24;
-
-	if (check_bpp)
-		bpp = check_bpp;
-	else if (intel_crtc)
-		bpp = intel_crtc->bpp;
-
 	return (pixel_clock * bpp + 9) / 10;
 }
 
@@ -245,12 +236,11 @@ intel_dp_mode_valid(struct drm_connector
 			return MODE_PANEL;
 	}
 
-	mode_rate = intel_dp_link_required(intel_dp, mode->clock, 0);
+	mode_rate = intel_dp_link_required(mode->clock, 24);
 	max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
 
 	if (mode_rate > max_rate) {
-			mode_rate = intel_dp_link_required(intel_dp,
-							   mode->clock, 18);
+			mode_rate = intel_dp_link_required(mode->clock, 18);
 			if (mode_rate > max_rate)
 				return MODE_CLOCK_HIGH;
 			else
@@ -683,7 +673,7 @@ intel_dp_mode_fixup(struct drm_encoder *
 	int lane_count, clock;
 	int max_lane_count = intel_dp_max_lane_count(intel_dp);
 	int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
-	int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 0;
+	int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
 	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
 
 	if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
@@ -701,7 +691,7 @@ intel_dp_mode_fixup(struct drm_encoder *
 		for (clock = 0; clock <= max_clock; clock++) {
 			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
 
-			if (intel_dp_link_required(intel_dp, mode->clock, bpp)
+			if (intel_dp_link_required(mode->clock, bpp)
 					<= link_avail) {
 				intel_dp->link_bw = bws[clock];
 				intel_dp->lane_count = lane_count;

[06/28] drm/i915: no lvds quirk for AOpen MP45

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit e57b6886f555ab57f40a01713304e2053efe51ec upstream.

According to a bug report, it doesn't have one.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_lvds.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -694,6 +694,14 @@ static const struct dmi_system_id intel_
 	},
 	{
 		.callback = intel_no_lvds_dmi_callback,
+                .ident = "AOpen i45GMx-I",
+                .matches = {
+                        DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+                        DMI_MATCH(DMI_BOARD_NAME, "i45GMx-I"),
+                },
+        },
+	{
+		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Aopen i945GTt-VFA",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),

[07/28] ath9k: Fix kernel panic during driver initilization

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>

commit 07445f688218a48bde72316aed9de4fdcc173131 upstream.

all works need to be initialized before ieee80211_register_hw
to prevent mac80211 call backs such as drv_start, drv_config
getting started. otherwise we would queue/cancel works before
initializing them and it leads to kernel panic.
this issue can be recreated with the following script
in Chrome laptops with AR928X cards, with background scan
running (or) Network manager is running

while true
do
sudo modprobe -v ath9k
sleep 3
sudo modprobe -r ath9k
sleep 3
done

	 EIP: [<81040a47>] __cancel_work_timer+0xb8/0xe1 SS:ESP 0068:f6be9d70
	 ---[ end trace 4f86d6139a9900ef ]---
	 Registered led device: ath9k-phy0
	 ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf88a0000,
	 irq=16
	 Kernel panic - not syncing: Fatal exception
	 Pid: 456, comm: wpa_supplicant Tainted: G      D
	 3.0.13 #1
	Call Trace:
	 [<81379e21>] panic+0x53/0x14a
	 [<81004a30>] oops_end+0x73/0x81
	 [<81004b53>] die+0x4c/0x55
	 [<81002710>] do_trap+0x7c/0x83
	 [<81002855>] ? do_bounds+0x58/0x58
	 [<810028cc>] do_invalid_op+0x77/0x81
	 [<81040a47>] ? __cancel_work_timer+0xb8/0xe1
	 [<810489ec>] ? sched_clock_cpu+0x81/0x11f
	 [<8103f809>] ? wait_on_work+0xe2/0xf7
	 [<8137f807>] error_code+0x67/0x6c
	 [<810300d8>] ? wait_consider_task+0x4ba/0x84c
	 [<81040a47>] ? __cancel_work_timer+0xb8/0xe1
	 [<810380c9>] ? try_to_del_timer_sync+0x5f/0x67
	 [<81040a91>] cancel_work_sync+0xf/0x11
	 [<f88d7b7c>] ath_set_channel+0x62/0x25c [ath9k]
	 [<f88d67d1>] ? ath9k_tx_last_beacon+0x26a/0x85c [ath9k]
	 [<f88d8899>] ath_radio_disable+0x3f1/0x68e [ath9k]
	 [<f90d0edb>] ieee80211_hw_config+0x111/0x116 [mac80211]
	 [<f90dd95c>] __ieee80211_recalc_idle+0x919/0xa37 [mac80211]
	 [<f90dda76>] __ieee80211_recalc_idle+0xa33/0xa37 [mac80211]
	 [<812dbed8>] __dev_open+0x82/0xab

Cc: Gary Morain <gmorain@google.com>
Cc: Paul Stewart <pstew@google.com>
Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/init.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -775,6 +775,11 @@ int ath9k_init_device(u16 devid, struct
 		ARRAY_SIZE(ath9k_tpt_blink));
 #endif
 
+	INIT_WORK(&sc->hw_reset_work, ath_reset_work);
+	INIT_WORK(&sc->hw_check_work, ath_hw_check);
+	INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
+	INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
+
 	/* Register with mac80211 */
 	error = ieee80211_register_hw(hw);
 	if (error)
@@ -793,10 +798,6 @@ int ath9k_init_device(u16 devid, struct
 			goto error_world;
 	}
 
-	INIT_WORK(&sc->hw_reset_work, ath_reset_work);
-	INIT_WORK(&sc->hw_check_work, ath_hw_check);
-	INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
-	INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
 	sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
 
 	ath_init_leds(sc);

[08/28] ath9k: fix a WEP crypto related regression

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit f88373fa47f3ce6590fdfaa742d0ddacc2ae017f upstream.

commit b4a82a0 "ath9k_hw: fix interpretation of the rx KeyMiss flag"
fixed the interpretation of the KeyMiss flag for keycache based lookups,
however WEP encryption uses a static index, so KeyMiss is always asserted
for it, even though frames are decrypted properly.
Fix this by clearing the ATH9K_RXERR_KEYMISS flag if no keycache based
lookup was performed.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Laurent Bonnans <bonnans.l@gmail.com>
Reported-by: Jurica Vukadin <u.ra604@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/recv.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -824,6 +824,14 @@ static bool ath9k_rx_accept(struct ath_c
 		(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
 		 ATH9K_RXERR_KEYMISS));
 
+	/*
+	 * Key miss events are only relevant for pairwise keys where the
+	 * descriptor does contain a valid key index. This has been observed
+	 * mostly with CCMP encryption.
+	 */
+	if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+		rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
+
 	if (!rx_stats->rs_datalen)
 		return false;
         /*

[09/28] ath9k_hw: fix a RTS/CTS timeout regression

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 55a2bb4a6d5e8c7b324d003e130fd9aaf33be4e6 upstream.

commit adb5066 "ath9k_hw: do not apply the 2.4 ghz ack timeout
workaround to cts" reduced the hardware CTS timeout to the normal
values specified by the standard, but it turns out while it doesn't
need the same extra time that it needs for the ACK timeout, it
does need more than the value specified in the standard, but only
for 2.4 GHz.

This patch brings the CTS timeout value in sync with the initialization
values, while still allowing adjustment for bigger distances.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/hw.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1034,13 +1034,16 @@ void ath9k_hw_init_global_settings(struc
 
 	/*
 	 * Workaround for early ACK timeouts, add an offset to match the
-	 * initval's 64us ack timeout value.
+	 * initval's 64us ack timeout value. Use 48us for the CTS timeout.
 	 * This was initially only meant to work around an issue with delayed
 	 * BA frames in some implementations, but it has been found to fix ACK
 	 * timeout issues in other cases as well.
 	 */
-	if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ)
+	if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) {
 		acktimeout += 64 - sifstime - ah->slottime;
+		ctstimeout += 48 - sifstime - ah->slottime;
+	}
+
 
 	ath9k_hw_set_sifs_time(ah, sifstime);
 	ath9k_hw_setslottime(ah, slottime);

[10/28] hwmon: (f75375s) Fix bit shifting in f75375_write16

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolaus Schulz <schulz@macnetix.de>

commit eb2f255b2d360df3f500042a2258dcf2fcbe89a2 upstream.

In order to extract the high byte of the 16-bit word, shift the word to
the right, not to the left.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/f75375s.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -159,7 +159,7 @@ static inline void f75375_write8(struct
 static inline void f75375_write16(struct i2c_client *client, u8 reg,
 		u16 value)
 {
-	int err = i2c_smbus_write_byte_data(client, reg, (value << 8));
+	int err = i2c_smbus_write_byte_data(client, reg, (value >> 8));
 	if (err)
 		return;
 	i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));

[11/28] net: enable TC35815 for MIPS again

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>

commit a1728800bed3b93b231d99e97c756f622b9991c2 upstream.

8<----------------------------------------------------------------------
From: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Date: Wed, 16 Nov 2011 09:33:50 +0100
Subject: [11/28] net: enable TC35815 for MIPS again

TX493[8,9] MIPS SoCs support 2 Ethernet channels of type TC35815
which are connected to the internal PCI controller.
And JMR3927 MIPS board has a TC35815 chip on board.
These dependencies were lost on movement to drivers/net/ethernet/toshiba.

Signed-off-by: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/toshiba/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/toshiba/Kconfig
+++ b/drivers/net/ethernet/toshiba/Kconfig
@@ -5,7 +5,7 @@
 config NET_VENDOR_TOSHIBA
 	bool "Toshiba devices"
 	default y
-	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3
+	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB || MIPS) || PPC_PS3
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from

[12/28] lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wu Fengguang <fengguang.wu@intel.com>

commit 3310225dfc71a35a2cc9340c15c0e08b14b3c754 upstream.

PROP_MAX_SHIFT should be set to <=32 on 64-bit box. This fixes two bugs
in the below lines of bdi_dirty_limit():

	bdi_dirty *= numerator;
	do_div(bdi_dirty, denominator);

1) divide error: do_div() only uses the lower 32 bit of the denominator,
   which may trimmed to be 0 when PROP_MAX_SHIFT > 32.

2) overflow: (bdi_dirty * numerator) could easily overflow if numerator
   used up to 48 bits, leaving only 16 bits to bdi_dirty

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Ilya Tumaykin <librarian_rus@yahoo.com>
Tested-by: Ilya Tumaykin <librarian_rus@yahoo.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/proportions.h |    4 ++++
 1 file changed, 4 insertions(+)

--- a/include/linux/proportions.h
+++ b/include/linux/proportions.h
@@ -81,7 +81,11 @@ void prop_inc_percpu(struct prop_descrip
  * Limit the time part in order to ensure there are some bits left for the
  * cycle counter and fraction multiply.
  */
+#if BITS_PER_LONG == 32
 #define PROP_MAX_SHIFT (3*BITS_PER_LONG/4)
+#else
+#define PROP_MAX_SHIFT (BITS_PER_LONG/2)
+#endif
 
 #define PROP_FRAC_SHIFT		(BITS_PER_LONG - PROP_MAX_SHIFT - 1)
 #define PROP_FRAC_BASE		(1UL << PROP_FRAC_SHIFT)

[13/28] relay: prevent integer overflow in relay_open()

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit f6302f1bcd75a042df69866d98b8d775a668f8f1 upstream.

"subbuf_size" and "n_subbufs" come from the user and they need to be
capped to prevent an integer overflow.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/relay.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -164,10 +164,14 @@ depopulate:
  */
 static struct rchan_buf *relay_create_buf(struct rchan *chan)
 {
-	struct rchan_buf *buf = kzalloc(sizeof(struct rchan_buf), GFP_KERNEL);
-	if (!buf)
+	struct rchan_buf *buf;
+
+	if (chan->n_subbufs > UINT_MAX / sizeof(size_t *))
 		return NULL;
 
+	buf = kzalloc(sizeof(struct rchan_buf), GFP_KERNEL);
+	if (!buf)
+		return NULL;
 	buf->padding = kmalloc(chan->n_subbufs * sizeof(size_t *), GFP_KERNEL);
 	if (!buf->padding)
 		goto free_buf;
@@ -574,6 +578,8 @@ struct rchan *relay_open(const char *bas
 
 	if (!(subbuf_size && n_subbufs))
 		return NULL;
+	if (subbuf_size > UINT_MAX / n_subbufs)
+		return NULL;
 
 	chan = kzalloc(sizeof(struct rchan), GFP_KERNEL);
 	if (!chan)

[14/28] mac80211: timeout a single frame in the rx reorder buffer

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eliad Peller <eliad@wizery.com>

commit 07ae2dfcf4f7143ce191c6436da1c33f179af0d6 upstream.

The current code checks for stored_mpdu_num > 1, causing
the reorder_timer to be triggered indefinitely, but the
frame is never timed-out (until the next packet is received)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/rx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -616,7 +616,7 @@ static void ieee80211_sta_reorder_releas
 	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
 						tid_agg_rx->buf_size;
 	if (!tid_agg_rx->reorder_buf[index] &&
-	    tid_agg_rx->stored_mpdu_num > 1) {
+	    tid_agg_rx->stored_mpdu_num) {
 		/*
 		 * No buffers ready to be released, but check whether any
 		 * frames in the reorder buffer have timed out.

[15/28] writeback: fix NULL bdi->dev in trace writeback_single_inode

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wu Fengguang <fengguang.wu@intel.com>

commit 15eb77a07c714ac80201abd0a9568888bcee6276 upstream.

bdi_prune_sb() resets sb->s_bdi to default_backing_dev_info when the
tearing down the original bdi. Fix trace_writeback_single_inode to
use sb->s_bdi=default_backing_dev_info rather than bdi->dev=NULL for a
teared down bdi.

Reported-by: Rabin Vincent <rabin@rab.in>
Tested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fs-writeback.c                |   16 ++++++++--------
 include/trace/events/writeback.h |    2 +-
 2 files changed, 9 insertions(+), 9 deletions(-)

--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -48,14 +48,6 @@ struct wb_writeback_work {
 };
 
 /*
- * Include the creation of the trace points after defining the
- * wb_writeback_work structure so that the definition remains local to this
- * file.
- */
-#define CREATE_TRACE_POINTS
-#include <trace/events/writeback.h>
-
-/*
  * We don't actually have pdflush, but this one is exported though /proc...
  */
 int nr_pdflush_threads;
@@ -87,6 +79,14 @@ static inline struct inode *wb_inode(str
 	return list_entry(head, struct inode, i_wb_list);
 }
 
+/*
+ * Include the creation of the trace points after defining the
+ * wb_writeback_work structure and inline functions so that the definition
+ * remains local to this file.
+ */
+#define CREATE_TRACE_POINTS
+#include <trace/events/writeback.h>
+
 /* Wakeup flusher thread or forker thread to fork it. Requires bdi->wb_lock. */
 static void bdi_wakeup_flusher(struct backing_dev_info *bdi)
 {
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -418,7 +418,7 @@ DECLARE_EVENT_CLASS(writeback_single_ino
 
 	TP_fast_assign(
 		strncpy(__entry->name,
-			dev_name(inode->i_mapping->backing_dev_info->dev), 32);
+			dev_name(inode_to_bdi(inode)->dev), 32);
 		__entry->ino		= inode->i_ino;
 		__entry->state		= inode->i_state;
 		__entry->dirtied_when	= inode->dirtied_when;

[16/28] writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wu Fengguang <fengguang.wu@intel.com>

commit 977b7e3a52a7421ad33a393a38ece59f3d41c2fa upstream.

When a SD card is hot removed without umount, del_gendisk() will call
bdi_unregister() without destroying/freeing it. This leaves the bdi in
the bdi->dev = NULL, bdi->wb.task = NULL, bdi->bdi_list removed state.

When sync(2) gets the bdi before bdi_unregister() and calls
bdi_queue_work() after the unregister, trace_writeback_queue will be
dereferencing the NULL bdi->dev. Fix it with a simple test for NULL.

LKML-reference: http://lkml.org/lkml/2012/1/18/346
Reported-by: Rabin Vincent <rabin@rab.in>
Tested-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/trace/events/writeback.h |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -47,7 +47,10 @@ DECLARE_EVENT_CLASS(writeback_work_class
 		__field(int, reason)
 	),
 	TP_fast_assign(
-		strncpy(__entry->name, dev_name(bdi->dev), 32);
+		struct device *dev = bdi->dev;
+		if (!dev)
+			dev = default_backing_dev_info.dev;
+		strncpy(__entry->name, dev_name(dev), 32);
 		__entry->nr_pages = work->nr_pages;
 		__entry->sb_dev = work->sb ? work->sb->s_dev : 0;
 		__entry->sync_mode = work->sync_mode;

[17/28] hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolaus Schulz <schulz@macnetix.de>

commit 09e87e5c4f9af656af2a8a3afc03487c5d9287c3 upstream.

In order to enable temperature mode aka automatic mode for the F75373 and
F75375 chips, the two FANx_MODE bits in the fan configuration register
need be set to 01, not 10.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/f75375s.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -311,7 +311,7 @@ static int set_pwm_enable_direct(struct
 		fanmode  |= (3 << FAN_CTRL_MODE(nr));
 		break;
 	case 2: /* AUTOMATIC*/
-		fanmode  |= (2 << FAN_CTRL_MODE(nr));
+		fanmode  |= (1 << FAN_CTRL_MODE(nr));
 		break;
 	case 3: /* fan speed */
 		break;

[18/28] cifs: request oplock when doing open on lookup

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit 8b0192a5f478da1c1ae906bf3ffff53f26204f56 upstream.

Currently, it's always set to 0 (no oplock requested).

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/dir.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -492,7 +492,7 @@ cifs_lookup(struct inode *parent_dir_ino
 {
 	int xid;
 	int rc = 0; /* to get around spurious gcc warning, set to zero here */
-	__u32 oplock = 0;
+	__u32 oplock = enable_oplocks ? REQ_OPLOCK : 0;
 	__u16 fileHandle = 0;
 	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;

[19/28] cifs: dont return error from standard_receive3 after marking response malformed

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit ff4fa4a25a33f92b5653bb43add0c63bea98d464 upstream.

standard_receive3 will check the validity of the response from the
server (via checkSMB). It'll pass the result of that check to handle_mid
which will dequeue it and mark it with a status of
MID_RESPONSE_MALFORMED if checkSMB returned an error. At that point,
standard_receive3 will also return an error, which will make the
demultiplex thread skip doing the callback for the mid.

This is wrong -- if we were able to identify the request and the
response is marked malformed, then we want the demultiplex thread to do
the callback. Fix this by making standard_receive3 return 0 in this
situation.

Reported-and-Tested-by: Mark Moseley <moseleymark@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/connect.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -756,10 +756,11 @@ standard_receive3(struct TCP_Server_Info
 		cifs_dump_mem("Bad SMB: ", buf,
 			min_t(unsigned int, server->total_read, 48));
 
-	if (mid)
-		handle_mid(mid, server, smb_buffer, length);
+	if (!mid)
+		return length;
 
-	return length;
+	handle_mid(mid, server, smb_buffer, length);
+	return 0;
 }
 
 static int

[20/28] crypto: sha512 - Use binary and instead of modulus

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 58d7d18b5268febb8b1391c6dffc8e2aaa751fcd upstream.

The previous patch used the modulus operator over a power of 2
unnecessarily which may produce suboptimal binary code.  This
patch changes changes them to binary ands instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/sha512_generic.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -78,7 +78,7 @@ static inline void LOAD_OP(int I, u64 *W
 
 static inline void BLEND_OP(int I, u64 *W)
 {
-	W[I % 16] += s1(W[(I-2) % 16]) + W[(I-7) % 16] + s0(W[(I-15) % 16]);
+	W[I & 15] += s1(W[(I-2) & 15]) + W[(I-7) & 15] + s0(W[(I-15) & 15]);
 }
 
 static void
@@ -105,7 +105,7 @@ sha512_transform(u64 *state, const u8 *i
 
 #define SHA512_16_79(i, a, b, c, d, e, f, g, h)			\
 	BLEND_OP(i, W);						\
-	t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)%16];	\
+	t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)&15];	\
 	t2 = e0(a) + Maj(a, b, c);				\
 	d += t1;						\
 	h = t1 + t2

[21/28] crypto: sha512 - Avoid stack bloat on i386

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 3a92d687c8015860a19213e3c102cad6b722f83c upstream.

Unfortunately in reducing W from 80 to 16 we ended up unrolling
the loop twice.  As gcc has issues dealing with 64-bit ops on
i386 this means that we end up using even more stack space (>1K).

This patch solves the W reduction by moving LOAD_OP/BLEND_OP
into the loop itself, thus avoiding the need to duplicate it.

While the stack space still isn't great (>0.5K) it is at least
in the same ball park as the amount of stack used for our C sha1
implementation.

Note that this patch basically reverts to the original code so
the diff looks bigger than it really is.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/sha512_generic.c |   68 ++++++++++++++++++++++--------------------------
 1 file changed, 32 insertions(+), 36 deletions(-)

--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -89,46 +89,42 @@ sha512_transform(u64 *state, const u8 *i
 	int i;
 	u64 W[16];
 
-	/* load the input */
-        for (i = 0; i < 16; i++)
-                LOAD_OP(i, W, input);
-
 	/* load the state into our registers */
 	a=state[0];   b=state[1];   c=state[2];   d=state[3];
 	e=state[4];   f=state[5];   g=state[6];   h=state[7];
 
-#define SHA512_0_15(i, a, b, c, d, e, f, g, h)			\
-	t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[i];	\
-	t2 = e0(a) + Maj(a, b, c);				\
-	d += t1;						\
-	h = t1 + t2
-
-#define SHA512_16_79(i, a, b, c, d, e, f, g, h)			\
-	BLEND_OP(i, W);						\
-	t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)&15];	\
-	t2 = e0(a) + Maj(a, b, c);				\
-	d += t1;						\
-	h = t1 + t2
-
-	for (i = 0; i < 16; i += 8) {
-		SHA512_0_15(i, a, b, c, d, e, f, g, h);
-		SHA512_0_15(i + 1, h, a, b, c, d, e, f, g);
-		SHA512_0_15(i + 2, g, h, a, b, c, d, e, f);
-		SHA512_0_15(i + 3, f, g, h, a, b, c, d, e);
-		SHA512_0_15(i + 4, e, f, g, h, a, b, c, d);
-		SHA512_0_15(i + 5, d, e, f, g, h, a, b, c);
-		SHA512_0_15(i + 6, c, d, e, f, g, h, a, b);
-		SHA512_0_15(i + 7, b, c, d, e, f, g, h, a);
-	}
-	for (i = 16; i < 80; i += 8) {
-		SHA512_16_79(i, a, b, c, d, e, f, g, h);
-		SHA512_16_79(i + 1, h, a, b, c, d, e, f, g);
-		SHA512_16_79(i + 2, g, h, a, b, c, d, e, f);
-		SHA512_16_79(i + 3, f, g, h, a, b, c, d, e);
-		SHA512_16_79(i + 4, e, f, g, h, a, b, c, d);
-		SHA512_16_79(i + 5, d, e, f, g, h, a, b, c);
-		SHA512_16_79(i + 6, c, d, e, f, g, h, a, b);
-		SHA512_16_79(i + 7, b, c, d, e, f, g, h, a);
+	/* now iterate */
+	for (i=0; i<80; i+=8) {
+		if (!(i & 8)) {
+			int j;
+
+			if (i < 16) {
+				/* load the input */
+				for (j = 0; j < 16; j++)
+					LOAD_OP(i + j, W, input);
+			} else {
+				for (j = 0; j < 16; j++) {
+					BLEND_OP(i + j, W);
+				}
+			}
+		}
+
+		t1 = h + e1(e) + Ch(e,f,g) + sha512_K[i  ] + W[(i & 15)];
+		t2 = e0(a) + Maj(a,b,c);    d+=t1;    h=t1+t2;
+		t1 = g + e1(d) + Ch(d,e,f) + sha512_K[i+1] + W[(i & 15) + 1];
+		t2 = e0(h) + Maj(h,a,b);    c+=t1;    g=t1+t2;
+		t1 = f + e1(c) + Ch(c,d,e) + sha512_K[i+2] + W[(i & 15) + 2];
+		t2 = e0(g) + Maj(g,h,a);    b+=t1;    f=t1+t2;
+		t1 = e + e1(b) + Ch(b,c,d) + sha512_K[i+3] + W[(i & 15) + 3];
+		t2 = e0(f) + Maj(f,g,h);    a+=t1;    e=t1+t2;
+		t1 = d + e1(a) + Ch(a,b,c) + sha512_K[i+4] + W[(i & 15) + 4];
+		t2 = e0(e) + Maj(e,f,g);    h+=t1;    d=t1+t2;
+		t1 = c + e1(h) + Ch(h,a,b) + sha512_K[i+5] + W[(i & 15) + 5];
+		t2 = e0(d) + Maj(d,e,f);    g+=t1;    c=t1+t2;
+		t1 = b + e1(g) + Ch(g,h,a) + sha512_K[i+6] + W[(i & 15) + 6];
+		t2 = e0(c) + Maj(c,d,e);    f+=t1;    b=t1+t2;
+		t1 = a + e1(f) + Ch(f,g,h) + sha512_K[i+7] + W[(i & 15) + 7];
+		t2 = e0(b) + Maj(b,c,d);    e+=t1;    a=t1+t2;
 	}
 
 	state[0] += a; state[1] += b; state[2] += c; state[3] += d;

Re: [21/28] crypto: sha512 - Avoid stack bloat on i386

[David Miller]

From: Greg KH <gregkh@linuxfoundation.org>
Date: Thu, 16 Feb 2012 16:55:55 -0800

> 3.2-stable review patch.  If anyone has any objections, please let me know.

This causes a stack usage regression on sparc that Herbert
is in the middle of merging a fix for into Linus's tree.

Re: [21/28] crypto: sha512 - Avoid stack bloat on i386

[Greg KH]

On Thu, Feb 16, 2012 at 08:52:31PM -0500, David Miller wrote:
> From: Greg KH <gregkh@linuxfoundation.org>
> Date: Thu, 16 Feb 2012 16:55:55 -0800
> 
> > 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> This causes a stack usage regression on sparc that Herbert
> is in the middle of merging a fix for into Linus's tree.

Ick.  Any idea when that will hit Linus's tree?  If it's before next
Monday, we are good, and I can queue it up here, if not, then I'll drop
this and have to add it back later.

thanks,

greg k-h

Re: [21/28] crypto: sha512 - Avoid stack bloat on i386

[Herbert Xu]

On Thu, Feb 16, 2012 at 06:17:18PM -0800, Greg KH wrote:
> On Thu, Feb 16, 2012 at 08:52:31PM -0500, David Miller wrote:
> > From: Greg KH <gregkh@linuxfoundation.org>
> > Date: Thu, 16 Feb 2012 16:55:55 -0800
> > 
> > > 3.2-stable review patch.  If anyone has any objections, please let me know.
> > 
> > This causes a stack usage regression on sparc that Herbert
> > is in the middle of merging a fix for into Linus's tree.
> 
> Ick.  Any idea when that will hit Linus's tree?  If it's before next
> Monday, we are good, and I can queue it up here, if not, then I'll drop
> this and have to add it back later.

I've pushed it though it hasn't been pulled yet:

The commit ID is f2ea0f5f04c97b48c88edccba52b0682fbe45087.

Thanks,
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

Re: [21/28] crypto: sha512 - Avoid stack bloat on i386

[Greg KH]

On Fri, Feb 17, 2012 at 01:28:06PM +1100, Herbert Xu wrote:
> On Thu, Feb 16, 2012 at 06:17:18PM -0800, Greg KH wrote:
> > On Thu, Feb 16, 2012 at 08:52:31PM -0500, David Miller wrote:
> > > From: Greg KH <gregkh@linuxfoundation.org>
> > > Date: Thu, 16 Feb 2012 16:55:55 -0800
> > > 
> > > > 3.2-stable review patch.  If anyone has any objections, please let me know.
> > > 
> > > This causes a stack usage regression on sparc that Herbert
> > > is in the middle of merging a fix for into Linus's tree.
> > 
> > Ick.  Any idea when that will hit Linus's tree?  If it's before next
> > Monday, we are good, and I can queue it up here, if not, then I'll drop
> > this and have to add it back later.
> 
> I've pushed it though it hasn't been pulled yet:
> 
> The commit ID is f2ea0f5f04c97b48c88edccba52b0682fbe45087.

Thanks, I'll watch out for it.

greg k-h

Re: [21/28] crypto: sha512 - Avoid stack bloat on i386

[David Miller]

From: Greg KH <gregkh@linuxfoundation.org>
Date: Thu, 16 Feb 2012 18:37:42 -0800

> On Fri, Feb 17, 2012 at 01:28:06PM +1100, Herbert Xu wrote:
>> On Thu, Feb 16, 2012 at 06:17:18PM -0800, Greg KH wrote:
>> > On Thu, Feb 16, 2012 at 08:52:31PM -0500, David Miller wrote:
>> > > From: Greg KH <gregkh@linuxfoundation.org>
>> > > Date: Thu, 16 Feb 2012 16:55:55 -0800
>> > > 
>> > > > 3.2-stable review patch.  If anyone has any objections, please let me know.
>> > > 
>> > > This causes a stack usage regression on sparc that Herbert
>> > > is in the middle of merging a fix for into Linus's tree.
>> > 
>> > Ick.  Any idea when that will hit Linus's tree?  If it's before next
>> > Monday, we are good, and I can queue it up here, if not, then I'll drop
>> > this and have to add it back later.
>> 
>> I've pushed it though it hasn't been pulled yet:
>> 
>> The commit ID is f2ea0f5f04c97b48c88edccba52b0682fbe45087.
> 
> Thanks, I'll watch out for it.

Greg, keep in mind that this stuff is in your 3.0-stable series too.

Re: [21/28] crypto: sha512 - Avoid stack bloat on i386

[Greg KH]

On Thu, Feb 16, 2012 at 09:54:31PM -0500, David Miller wrote:
> From: Greg KH <gregkh@linuxfoundation.org>
> Date: Thu, 16 Feb 2012 18:37:42 -0800
> 
> > On Fri, Feb 17, 2012 at 01:28:06PM +1100, Herbert Xu wrote:
> >> On Thu, Feb 16, 2012 at 06:17:18PM -0800, Greg KH wrote:
> >> > On Thu, Feb 16, 2012 at 08:52:31PM -0500, David Miller wrote:
> >> > > From: Greg KH <gregkh@linuxfoundation.org>
> >> > > Date: Thu, 16 Feb 2012 16:55:55 -0800
> >> > > 
> >> > > > 3.2-stable review patch.  If anyone has any objections, please let me know.
> >> > > 
> >> > > This causes a stack usage regression on sparc that Herbert
> >> > > is in the middle of merging a fix for into Linus's tree.
> >> > 
> >> > Ick.  Any idea when that will hit Linus's tree?  If it's before next
> >> > Monday, we are good, and I can queue it up here, if not, then I'll drop
> >> > this and have to add it back later.
> >> 
> >> I've pushed it though it hasn't been pulled yet:
> >> 
> >> The commit ID is f2ea0f5f04c97b48c88edccba52b0682fbe45087.
> > 
> > Thanks, I'll watch out for it.
> 
> Greg, keep in mind that this stuff is in your 3.0-stable series too.

I just checked, and I also have this in the 2.6.32-stable tree, which I
haven't sent out for review, but will next week.

Thanks for pointing it out.

greg k-h

Re: [21/28] crypto: sha512 - Avoid stack bloat on i386

[Greg KH]

On Thu, Feb 16, 2012 at 07:30:54PM -0800, Greg KH wrote:
> On Thu, Feb 16, 2012 at 09:54:31PM -0500, David Miller wrote:
> > From: Greg KH <gregkh@linuxfoundation.org>
> > Date: Thu, 16 Feb 2012 18:37:42 -0800
> > 
> > > On Fri, Feb 17, 2012 at 01:28:06PM +1100, Herbert Xu wrote:
> > >> On Thu, Feb 16, 2012 at 06:17:18PM -0800, Greg KH wrote:
> > >> > On Thu, Feb 16, 2012 at 08:52:31PM -0500, David Miller wrote:
> > >> > > From: Greg KH <gregkh@linuxfoundation.org>
> > >> > > Date: Thu, 16 Feb 2012 16:55:55 -0800
> > >> > > 
> > >> > > > 3.2-stable review patch.  If anyone has any objections, please let me know.
> > >> > > 
> > >> > > This causes a stack usage regression on sparc that Herbert
> > >> > > is in the middle of merging a fix for into Linus's tree.
> > >> > 
> > >> > Ick.  Any idea when that will hit Linus's tree?  If it's before next
> > >> > Monday, we are good, and I can queue it up here, if not, then I'll drop
> > >> > this and have to add it back later.
> > >> 
> > >> I've pushed it though it hasn't been pulled yet:
> > >> 
> > >> The commit ID is f2ea0f5f04c97b48c88edccba52b0682fbe45087.
> > > 
> > > Thanks, I'll watch out for it.
> > 
> > Greg, keep in mind that this stuff is in your 3.0-stable series too.
> 
> I just checked, and I also have this in the 2.6.32-stable tree, which I
> haven't sent out for review, but will next week.
> 
> Thanks for pointing it out.

Ok, that's now in Linus's tree, so I've queued it up for the 3.0 and 3.2
releases in a few hours.

greg k-h

[22/28] backing-dev: fix wakeup timer races with bdi_unregister()

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rabin Vincent <rabin@rab.in>

commit 2673b4cf5d59c3ee5e0c12f6d734d38770324dc4 upstream.

While 7a401a972df8e18 ("backing-dev: ensure wakeup_timer is deleted")
addressed the problem of the bdi being freed with a queued wakeup
timer, there are other races that could happen if the wakeup timer
expires after/during bdi_unregister(), before bdi_destroy() is called.

wakeup_timer_fn() could attempt to wakeup a task which has already has
been freed, or could access a NULL bdi->dev via the wake_forker_thread
tracepoint.

Cc: Jens Axboe <axboe@kernel.dk>
Reported-by: Chanho Min <chanho.min@lge.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/backing-dev.c |   25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -318,7 +318,7 @@ static void wakeup_timer_fn(unsigned lon
 	if (bdi->wb.task) {
 		trace_writeback_wake_thread(bdi);
 		wake_up_process(bdi->wb.task);
-	} else {
+	} else if (bdi->dev) {
 		/*
 		 * When bdi tasks are inactive for long time, they are killed.
 		 * In this case we have to wake-up the forker thread which
@@ -584,6 +584,8 @@ EXPORT_SYMBOL(bdi_register_dev);
  */
 static void bdi_wb_shutdown(struct backing_dev_info *bdi)
 {
+	struct task_struct *task;
+
 	if (!bdi_cap_writeback_dirty(bdi))
 		return;
 
@@ -604,9 +606,14 @@ static void bdi_wb_shutdown(struct backi
 	 * unfreeze of the thread before calling kthread_stop(), otherwise
 	 * it would never exet if it is currently stuck in the refrigerator.
 	 */
-	if (bdi->wb.task) {
-		thaw_process(bdi->wb.task);
-		kthread_stop(bdi->wb.task);
+	spin_lock_bh(&bdi->wb_lock);
+	task = bdi->wb.task;
+	bdi->wb.task = NULL;
+	spin_unlock_bh(&bdi->wb_lock);
+
+	if (task) {
+		thaw_process(task);
+		kthread_stop(task);
 	}
 }
 
@@ -627,7 +634,9 @@ static void bdi_prune_sb(struct backing_
 
 void bdi_unregister(struct backing_dev_info *bdi)
 {
-	if (bdi->dev) {
+	struct device *dev = bdi->dev;
+
+	if (dev) {
 		bdi_set_min_ratio(bdi, 0);
 		trace_writeback_bdi_unregister(bdi);
 		bdi_prune_sb(bdi);
@@ -636,8 +645,12 @@ void bdi_unregister(struct backing_dev_i
 		if (!bdi_cap_flush_forker(bdi))
 			bdi_wb_shutdown(bdi);
 		bdi_debug_unregister(bdi);
-		device_unregister(bdi->dev);
+
+		spin_lock_bh(&bdi->wb_lock);
 		bdi->dev = NULL;
+		spin_unlock_bh(&bdi->wb_lock);
+
+		device_unregister(dev);
 	}
 }
 EXPORT_SYMBOL(bdi_unregister);

[23/28] ALSA: intel8x0: Fix default inaudible sound on Gateway M520

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel T Chen <crimsun@ubuntu.com>

commit 27c3afe6e1cf129faac90405121203962da08ff4 upstream.

BugLink: https://bugs.launchpad.net/bugs/930842

The reporter states that audio is inaudible by default without muting
'External Amplifier'. Add a quirk to handle his SSID so that changing
the control is not necessary.

Reported-and-tested-by: Benjamin Carlson <elderbubba0810@gmail.com>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/intel8x0.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2102,6 +2102,12 @@ static struct ac97_quirk ac97_quirks[] _
 	},
 	{
 		.subvendor = 0x161f,
+		.subdevice = 0x202f,
+		.name = "Gateway M520",
+		.type = AC97_TUNE_INV_EAPD
+	},
+	{
+		.subvendor = 0x161f,
 		.subdevice = 0x203a,
 		.name = "Gateway 4525GZ",		/* AD1981B */
 		.type = AC97_TUNE_INV_EAPD

[24/28] ALSA: hda - Fix initialization of secondary capture source on VT1705

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit fc1156c0b0f7ad45ec03d919866349eeca2bf18c upstream.

VT1705 codec has two ADCs where the secondary ADC has no MUX but only
a fixed connection to the mic pin.  This confused the driver and it
tries always overriding the input-source selection by assumption of
the existing MUX for the secondary ADC, resulted in resetting the
input-source at each time PM (including power-saving) occurs.

The fix is simply to check the existence of MUX for secondary ADCs in
the initialization code.

Tested-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_via.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -665,6 +665,9 @@ static void via_auto_init_analog_input(s
 	/* init input-src */
 	for (i = 0; i < spec->num_adc_nids; i++) {
 		int adc_idx = spec->inputs[spec->cur_mux[i]].adc_idx;
+		/* secondary ADCs must have the unique MUX */
+		if (i > 0 && !spec->mux_nids[i])
+			break;
 		if (spec->mux_nids[adc_idx]) {
 			int mux_idx = spec->inputs[spec->cur_mux[i]].mux_idx;
 			snd_hda_codec_write(codec, spec->mux_nids[adc_idx], 0,

[25/28] ALSA: hda - Fix silent speaker output on Acer Aspire 6935

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 02a237b24d57e2e2d5402c92549e9e792aa24359 upstream.

Since 3.2 kernel, the driver starts trying to assign the multi-io DACs
before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for
the speaker for a standard laptop setup like a HP, a speaker, a mic-in
and a line-in.  However, on Acer Aspire 6935, it seems that the
speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it
results in silence by some reason, although the codec itself allows
the routing to DAC3/4.

As a workaround, the connection list of each pin is reduced to be
mapped to either only DAC1/2 or DAC3/4, so that the compatible
assignment as in kernel 3.1 is achieved.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4213,8 +4213,26 @@ enum {
 	PINFIX_PB_M5210,
 	PINFIX_ACER_ASPIRE_7736,
 	PINFIX_ASUS_W90V,
+	ALC889_FIXUP_DAC_ROUTE,
 };
 
+/* Fix the connection of some pins for ALC889:
+ * At least, Acer Aspire 5935 shows the connections to DAC3/4 don't
+ * work correctly (bko#42740)
+ */
+static void alc889_fixup_dac_route(struct hda_codec *codec,
+				   const struct alc_fixup *fix, int action)
+{
+	if (action == ALC_FIXUP_ACT_PRE_PROBE) {
+		hda_nid_t conn1[2] = { 0x0c, 0x0d };
+		hda_nid_t conn2[2] = { 0x0e, 0x0f };
+		snd_hda_override_conn_list(codec, 0x14, 2, conn1);
+		snd_hda_override_conn_list(codec, 0x15, 2, conn1);
+		snd_hda_override_conn_list(codec, 0x18, 2, conn2);
+		snd_hda_override_conn_list(codec, 0x1a, 2, conn2);
+	}
+}
+
 static const struct alc_fixup alc882_fixups[] = {
 	[PINFIX_ABIT_AW9D_MAX] = {
 		.type = ALC_FIXUP_PINS,
@@ -4251,10 +4269,15 @@ static const struct alc_fixup alc882_fix
 			{ }
 		}
 	},
+	[ALC889_FIXUP_DAC_ROUTE] = {
+		.type = ALC_FIXUP_FUNC,
+		.v.func = alc889_fixup_dac_route,
+	},
 };
 
 static const struct snd_pci_quirk alc882_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", PINFIX_PB_M5210),
+	SND_PCI_QUIRK(0x1025, 0x0259, "Acer Aspire 5935", ALC889_FIXUP_DAC_ROUTE),
 	SND_PCI_QUIRK(0x1043, 0x1873, "ASUS W90V", PINFIX_ASUS_W90V),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", PINFIX_LENOVO_Y530),
 	SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),

[26/28] mmc: atmel-mci: save and restore sdioirq when soft reset is performed

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ludovic Desroches <ludovic.desroches@atmel.com>

commit 18ee684b8ab666329e0a0a72d8b70f16fb0e2243 upstream.

Sometimes a software reset is needed. Then some registers are saved and
restored but the interrupt mask register is missing. It causes issues
with sdio devices whose interrupts are masked after reset.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/atmel-mci.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -965,11 +965,14 @@ static void atmci_start_request(struct a
 	host->data_status = 0;
 
 	if (host->need_reset) {
+		iflags = atmci_readl(host, ATMCI_IMR);
+		iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
 		atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
 		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
 		atmci_writel(host, ATMCI_MR, host->mode_reg);
 		if (host->caps.has_cfg_reg)
 			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+		atmci_writel(host, ATMCI_IER, iflags);
 		host->need_reset = false;
 	}
 	atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);

[27/28] mmc: dw_mmc: Fix PIO mode with support of highmem

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seungwon Jeon <tgih.jun@samsung.com>

commit f9c2a0dc42a6938ff2a80e55ca2bbd1d5581c72e upstream.

Current PIO mode makes a kernel crash with CONFIG_HIGHMEM.
Highmem pages have a NULL from sg_virt(sg).
This patch fixes the following problem.

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP
Modules linked in:
CPU: 0    Not tainted  (3.0.15-01423-gdbf465f #589)
PC is at dw_mci_pull_data32+0x4c/0x9c
LR is at dw_mci_read_data_pio+0x54/0x1f0
pc : [<c0358824>]    lr : [<c035988c>]    psr: 20000193
sp : c0619d48  ip : c0619d70  fp : c0619d6c
r10: 00000000  r9 : 00000002  r8 : 00001000
r7 : 00000200  r6 : 00000000  r5 : e1dd3100  r4 : 00000000
r3 : 65622023  r2 : 0000007f  r1 : eeb96000  r0 : e1dd3100
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment
xkernel
Control: 10c5387d  Table: 61e2004a  DAC: 00000015
Process swapper (pid: 0, stack limit = 0xc06182f0)
Stack: (0xc0619d48 to 0xc061a000)
9d40:                   e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200
9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100
9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8
9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154
9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900
9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08
9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c
9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000
9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68
9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68
9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8
9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff
9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4
9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44
9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4
9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48
9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc
9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8
9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714
9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000
9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a
9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000
Backtrace:
[<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0)
 r6:00000200 r5:e1a4f000 r4:e1dd3100
 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4)
[<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4)
[<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64)
[<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124)
 r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780
 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38)
 r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d
 [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0)
 r5:ffffee38 r4:c00423ac
 [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c)
Exception stack(0xc0619ed0 to 0xc0619f18)

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/dw_mmc.c  |  144 +++++++++++++++++++++++----------------------
 include/linux/mmc/dw_mmc.h |    6 +
 2 files changed, 79 insertions(+), 71 deletions(-)

--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -22,7 +22,6 @@
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/scatterlist.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
@@ -502,8 +501,14 @@ static void dw_mci_submit_data(struct dw
 		host->dir_status = DW_MCI_SEND_STATUS;
 
 	if (dw_mci_submit_data_dma(host, data)) {
+		int flags = SG_MITER_ATOMIC;
+		if (host->data->flags & MMC_DATA_READ)
+			flags |= SG_MITER_TO_SG;
+		else
+			flags |= SG_MITER_FROM_SG;
+
+		sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
 		host->sg = data->sg;
-		host->pio_offset = 0;
 		host->part_buf_start = 0;
 		host->part_buf_count = 0;
 
@@ -953,6 +958,7 @@ static void dw_mci_tasklet_func(unsigned
 				 * generates a block interrupt, hence setting
 				 * the scatter-gather pointer to NULL.
 				 */
+				sg_miter_stop(&host->sg_miter);
 				host->sg = NULL;
 				ctrl = mci_readl(host, CTRL);
 				ctrl |= SDMMC_CTRL_FIFO_RESET;
@@ -1286,54 +1292,44 @@ static void dw_mci_pull_data(struct dw_m
 
 static void dw_mci_read_data_pio(struct dw_mci *host)
 {
-	struct scatterlist *sg = host->sg;
-	void *buf = sg_virt(sg);
-	unsigned int offset = host->pio_offset;
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
+	void *buf;
+	unsigned int offset;
 	struct mmc_data	*data = host->data;
 	int shift = host->data_shift;
 	u32 status;
 	unsigned int nbytes = 0, len;
+	unsigned int remain, fcnt;
 
 	do {
-		len = host->part_buf_count +
-			(SDMMC_GET_FCNT(mci_readl(host, STATUS)) << shift);
-		if (offset + len <= sg->length) {
-			dw_mci_pull_data(host, (void *)(buf + offset), len);
+		if (!sg_miter_next(sg_miter))
+			goto done;
 
+		host->sg = sg_miter->__sg;
+		buf = sg_miter->addr;
+		remain = sg_miter->length;
+		offset = 0;
+
+		do {
+			fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
+					<< shift) + host->part_buf_count;
+			len = min(remain, fcnt);
+			if (!len)
+				break;
+			dw_mci_pull_data(host, (void *)(buf + offset), len);
 			offset += len;
 			nbytes += len;
-
-			if (offset == sg->length) {
-				flush_dcache_page(sg_page(sg));
-				host->sg = sg = sg_next(sg);
-				if (!sg)
-					goto done;
-
-				offset = 0;
-				buf = sg_virt(sg);
-			}
-		} else {
-			unsigned int remaining = sg->length - offset;
-			dw_mci_pull_data(host, (void *)(buf + offset),
-					 remaining);
-			nbytes += remaining;
-
-			flush_dcache_page(sg_page(sg));
-			host->sg = sg = sg_next(sg);
-			if (!sg)
-				goto done;
-
-			offset = len - remaining;
-			buf = sg_virt(sg);
-			dw_mci_pull_data(host, buf, offset);
-			nbytes += offset;
-		}
+			remain -= len;
+		} while (remain);
+		sg_miter->consumed = offset;
 
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
 		if (status & DW_MCI_DATA_ERROR_FLAGS) {
 			host->data_status = status;
 			data->bytes_xfered += nbytes;
+			sg_miter_stop(sg_miter);
+			host->sg = NULL;
 			smp_wmb();
 
 			set_bit(EVENT_DATA_ERROR, &host->pending_events);
@@ -1342,65 +1338,66 @@ static void dw_mci_read_data_pio(struct
 			return;
 		}
 	} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
-	host->pio_offset = offset;
 	data->bytes_xfered += nbytes;
+
+	if (!remain) {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+		sg_miter->consumed = 0;
+	}
+	sg_miter_stop(sg_miter);
 	return;
 
 done:
 	data->bytes_xfered += nbytes;
+	sg_miter_stop(sg_miter);
+	host->sg = NULL;
 	smp_wmb();
 	set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
 }
 
 static void dw_mci_write_data_pio(struct dw_mci *host)
 {
-	struct scatterlist *sg = host->sg;
-	void *buf = sg_virt(sg);
-	unsigned int offset = host->pio_offset;
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
+	void *buf;
+	unsigned int offset;
 	struct mmc_data	*data = host->data;
 	int shift = host->data_shift;
 	u32 status;
 	unsigned int nbytes = 0, len;
+	unsigned int fifo_depth = host->fifo_depth;
+	unsigned int remain, fcnt;
 
 	do {
-		len = ((host->fifo_depth -
-			SDMMC_GET_FCNT(mci_readl(host, STATUS))) << shift)
-			- host->part_buf_count;
-		if (offset + len <= sg->length) {
-			host->push_data(host, (void *)(buf + offset), len);
+		if (!sg_miter_next(sg_miter))
+			goto done;
 
+		host->sg = sg_miter->__sg;
+		buf = sg_miter->addr;
+		remain = sg_miter->length;
+		offset = 0;
+
+		do {
+			fcnt = ((fifo_depth -
+				 SDMMC_GET_FCNT(mci_readl(host, STATUS)))
+					<< shift) - host->part_buf_count;
+			len = min(remain, fcnt);
+			if (!len)
+				break;
+			host->push_data(host, (void *)(buf + offset), len);
 			offset += len;
 			nbytes += len;
-			if (offset == sg->length) {
-				host->sg = sg = sg_next(sg);
-				if (!sg)
-					goto done;
-
-				offset = 0;
-				buf = sg_virt(sg);
-			}
-		} else {
-			unsigned int remaining = sg->length - offset;
-
-			host->push_data(host, (void *)(buf + offset),
-					remaining);
-			nbytes += remaining;
-
-			host->sg = sg = sg_next(sg);
-			if (!sg)
-				goto done;
-
-			offset = len - remaining;
-			buf = sg_virt(sg);
-			host->push_data(host, (void *)buf, offset);
-			nbytes += offset;
-		}
+			remain -= len;
+		} while (remain);
+		sg_miter->consumed = offset;
 
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
 		if (status & DW_MCI_DATA_ERROR_FLAGS) {
 			host->data_status = status;
 			data->bytes_xfered += nbytes;
+			sg_miter_stop(sg_miter);
+			host->sg = NULL;
 
 			smp_wmb();
 
@@ -1410,12 +1407,20 @@ static void dw_mci_write_data_pio(struct
 			return;
 		}
 	} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
-	host->pio_offset = offset;
 	data->bytes_xfered += nbytes;
+
+	if (!remain) {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+		sg_miter->consumed = 0;
+	}
+	sg_miter_stop(sg_miter);
 	return;
 
 done:
 	data->bytes_xfered += nbytes;
+	sg_miter_stop(sg_miter);
+	host->sg = NULL;
 	smp_wmb();
 	set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
 }
@@ -1618,6 +1623,7 @@ static void dw_mci_work_routine_card(str
 				 * block interrupt, hence setting the
 				 * scatter-gather pointer to NULL.
 				 */
+				sg_miter_stop(&host->sg_miter);
 				host->sg = NULL;
 
 				ctrl = mci_readl(host, CTRL);
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -14,6 +14,8 @@
 #ifndef LINUX_MMC_DW_MMC_H
 #define LINUX_MMC_DW_MMC_H
 
+#include <linux/scatterlist.h>
+
 #define MAX_MCI_SLOTS	2
 
 enum dw_mci_state {
@@ -40,7 +42,7 @@ struct mmc_data;
  * @lock: Spinlock protecting the queue and associated data.
  * @regs: Pointer to MMIO registers.
  * @sg: Scatterlist entry currently being processed by PIO code, if any.
- * @pio_offset: Offset into the current scatterlist entry.
+ * @sg_miter: PIO mapping scatterlist iterator.
  * @cur_slot: The slot which is currently using the controller.
  * @mrq: The request currently being processed on @cur_slot,
  *	or NULL if the controller is idle.
@@ -115,7 +117,7 @@ struct dw_mci {
 	void __iomem		*regs;
 
 	struct scatterlist	*sg;
-	unsigned int		pio_offset;
+	struct sg_mapping_iter	sg_miter;
 
 	struct dw_mci_slot	*cur_slot;
 	struct mmc_request	*mrq;

[28/28] xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback

[Greg KH]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

commit 207d543f472c1ac9552df79838dc807cbcaa9740 upstream.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/pci/xen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -374,7 +374,7 @@ int __init pci_xen_init(void)
 
 int __init pci_xen_hvm_init(void)
 {
-	if (!xen_feature(XENFEAT_hvm_pirqs))
+	if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
 		return 0;
 
 #ifdef CONFIG_ACPI