* Regression: black screen on VGA w/ nouveau in Linux 3.3
@ 2012-03-19 14:35 Nick Bowler
2012-03-23 19:50 ` Maciej Rutecki
2012-04-04 1:27 ` Nick Bowler
0 siblings, 2 replies; 4+ messages in thread
From: Nick Bowler @ 2012-03-19 14:35 UTC (permalink / raw)
To: linux-kernel, dri-devel
Hi folks,
Just upgraded to Linux 3.3 on my desktop and noticed that the VGA output
on my card w/ nouveau is totally black (both at the console and in X).
Almost everything appears to work normally: DPMS works, modesetting
works, DDC works... all messages indicate that things are working --
just the image is completely black.
The VGA is one of two outputs in use: the other (DVI) output works
normally. The card also has an unused TV-out port, FWIW.
The card is an NV36 generation (Geforce FX5700 AGP). This is a
regression from Linux 3.2 -- unfortunately, bisection has proved
extremely difficult because the intermediate kernels git is asking me
to test panic immediately on boot (and compiling Linux takes a fairly
long time on this box too). The failed attempt went like this:
git bisect start 'drivers/gpu'
# bad: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3
git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7
# good: [805a6af8dba5dfdd35ec35dc52ec0122400b2610] Linux 3.2
git bisect good 805a6af8dba5dfdd35ec35dc52ec0122400b2610
# skip: [5d56fe5fd794a98c4f446f8665fd06b82e93ff64] Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-core-next
git bisect skip 5d56fe5fd794a98c4f446f8665fd06b82e93ff64
# good: [dffc9ceb55695f121adc57dd1fde7304c3afe81e] gma500: kill virtual mapping support
git bisect good dffc9ceb55695f121adc57dd1fde7304c3afe81e
# skip: [5c2a5ce689c99037771a6c110374461781a6f042] drm: add missing exports for i810 driver.
git bisect skip 5c2a5ce689c99037771a6c110374461781a6f042
# skip: [44517c44496062180a6376cc704b33129441ce60] drm/radeon/kms: Add an MSI quirk for Dell RS690
git bisect skip 44517c44496062180a6376cc704b33129441ce60
(I stopped at this point)
I'm running the latest git xf86-video-nouveau, but since the issue
occurs at the console it's probably not too important...
Let me know if you need any more info,
--
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Regression: black screen on VGA w/ nouveau in Linux 3.3
2012-03-19 14:35 Regression: black screen on VGA w/ nouveau in Linux 3.3 Nick Bowler
@ 2012-03-23 19:50 ` Maciej Rutecki
2012-04-04 1:27 ` Nick Bowler
1 sibling, 0 replies; 4+ messages in thread
From: Maciej Rutecki @ 2012-03-23 19:50 UTC (permalink / raw)
To: Nick Bowler; +Cc: linux-kernel, dri-devel
On poniedziałek, 19 marca 2012 o 15:35:48 Nick Bowler wrote:
> Hi folks,
>
> Just upgraded to Linux 3.3 on my desktop and noticed that the VGA output
> on my card w/ nouveau is totally black (both at the console and in X).
> Almost everything appears to work normally: DPMS works, modesetting
> works, DDC works... all messages indicate that things are working --
> just the image is completely black.
>
> The VGA is one of two outputs in use: the other (DVI) output works
> normally. The card also has an unused TV-out port, FWIW.
>
> The card is an NV36 generation (Geforce FX5700 AGP). This is a
> regression from Linux 3.2 -- unfortunately, bisection has proved
> extremely difficult because the intermediate kernels git is asking me
> to test panic immediately on boot (and compiling Linux takes a fairly
> long time on this box too). The failed attempt went like this:
>
> git bisect start 'drivers/gpu'
> # bad: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3
> git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7
> # good: [805a6af8dba5dfdd35ec35dc52ec0122400b2610] Linux 3.2
> git bisect good 805a6af8dba5dfdd35ec35dc52ec0122400b2610
> # skip: [5d56fe5fd794a98c4f446f8665fd06b82e93ff64] Merge branch
> 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6
> into drm-core-next git bisect skip
> 5d56fe5fd794a98c4f446f8665fd06b82e93ff64
> # good: [dffc9ceb55695f121adc57dd1fde7304c3afe81e] gma500: kill virtual
> mapping support git bisect good dffc9ceb55695f121adc57dd1fde7304c3afe81e
> # skip: [5c2a5ce689c99037771a6c110374461781a6f042] drm: add missing
> exports for i810 driver. git bisect skip
> 5c2a5ce689c99037771a6c110374461781a6f042
> # skip: [44517c44496062180a6376cc704b33129441ce60] drm/radeon/kms: Add an
> MSI quirk for Dell RS690 git bisect skip
> 44517c44496062180a6376cc704b33129441ce60
>
> (I stopped at this point)
>
> I'm running the latest git xf86-video-nouveau, but since the issue
> occurs at the console it's probably not too important...
>
> Let me know if you need any more info,
I created a Bugzilla entry at
https://bugzilla.kernel.org/show_bug.cgi?id=42983
for your bug/regression report, please add your address to the CC list in
there, thanks!
--
Maciej Rutecki
http://www.mrutecki.pl
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Regression: black screen on VGA w/ nouveau in Linux 3.3
2012-03-19 14:35 Regression: black screen on VGA w/ nouveau in Linux 3.3 Nick Bowler
2012-03-23 19:50 ` Maciej Rutecki
@ 2012-04-04 1:27 ` Nick Bowler
2012-04-18 2:01 ` Nick Bowler
1 sibling, 1 reply; 4+ messages in thread
From: Nick Bowler @ 2012-04-04 1:27 UTC (permalink / raw)
To: linux-kernel, dri-devel; +Cc: Tom Bylander, David Airlie, Ben Skeggs
[-- Attachment #1: Type: text/plain, Size: 8151 bytes --]
CCing Tom Bylander as he sent me a mail off-list saying he experiences
a similar issue on an FX 5200.
Tom, maybe you'll have better luck bisecting this than I did?
On 2012-03-19 10:35 -0400, Nick Bowler wrote:
> Just upgraded to Linux 3.3 on my desktop and noticed that the VGA output
> on my card w/ nouveau is totally black (both at the console and in X).
> Almost everything appears to work normally: DPMS works, modesetting
> works, DDC works... all messages indicate that things are working --
> just the image is completely black.
OK, so this is still reproducible on Linux 3.4-rc1+ (Linus' master). I
captured the dmesg output before (3.2.13, which is a working kernel),
and after (3.3.1 and 3.4-rc1-00144-g01627d9 - both fail in an identical
manner). All three logs are attached in full (gzipped).
One thing that immediately jumps out is the WARNING in the 3.4-rc1+ log
that occurs early and did not appear in either of the other logs:
------------[ cut here ]------------
WARNING: at /home/nick/misc/linux-2.6/arch/x86/pci/i386.c:60
pcibios_fwaddrmap_lookup+0x1d/0x3d()
Hardware name: K8N-E-Deluxe
Modules linked in:
Pid: 1, comm: swapper Not tainted 3.4.0-rc1-00144-g01627d9 #47
Call Trace:
[<ffffffff81026baf>] warn_slowpath_common+0x80/0x98
[<ffffffff81026bdc>] warn_slowpath_null+0x15/0x17
[<ffffffff8129f79f>] pcibios_fwaddrmap_lookup+0x1d/0x3d
[<ffffffff81687306>] pcibios_allocate_resources+0xd4/0x217
[<ffffffff81688447>] ? pci_legacy_init+0x3e/0x3e
[<ffffffff81687460>] pcibios_resource_survey+0x17/0x2d
[<ffffffff81688dfd>] pcibios_init+0x28/0x3a
[<ffffffff8168848e>] pci_subsys_init+0x47/0x4d
[<ffffffff810002e2>] do_one_initcall+0x78/0x126
[<ffffffff81662bab>] kernel_init+0xe9/0x17a
[<ffffffff8166248a>] ? rdinit_setup+0x28/0x28
[<ffffffff8131ac44>] kernel_thread_helper+0x4/0x10
[<ffffffff81662ac2>] ? start_kernel+0x321/0x321
[<ffffffff8131ac40>] ? gs_change+0xb/0xb
---[ end trace 4eaa2a86a8e2da22 ]---
Other than that, I diffed the 3.2.13 log and 3.4-rc1+ log and grepped
for nouveau-related differences. I see no obvious errors, but I admit
that I don't really know what to look for.
% diff -u nouveau-3.2.13.log nouveau-3.4-rc1+.log | grep -C3 '\[drm\]'
@@ -418,19 +429,21 @@
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
+VGA switcheroo: detected Optimus DSM method \ handle
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19
-nouveau 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19 (level, low) -> IRQ 19
[drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436200a1)
-[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
+[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:01:00.0: ... appears to be valid
+[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:01:00.0: BMP BIOS found
[drm] nouveau 0000:01:00.0: BMP version 5.40
[drm] nouveau 0000:01:00.0: Bios version 04.36.20.21
-[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
-[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
-[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
-[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04000302 00000000
-[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000303
+[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
+[drm] nouveau 0000:01:00.0: DCB version 2.2
+[drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00009c40
+[drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 00009c40
+[drm] nouveau 0000:01:00.0: DCB outp 02: 04000302 00000000
+[drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000303
[drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF01D
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF4E1
@@ -439,11 +452,10 @@
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF8B3
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF8D0
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF959
-[drm] nouveau 0000:01:00.0: 0 available performance level(s)
-[drm] nouveau 0000:01:00.0: c: core 425MHz memory 501MHz voltage 1350mV
-[TTM] Zone kernel: Available graphics memory: 512160 kiB.
-[TTM] Initializing pool allocator.
-[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
+[TTM] Zone kernel: Available graphics memory: 512142 kiB
+[TTM] Initializing pool allocator
+[TTM] Initializing DMA pool allocator
+[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (DDR1)
agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
agpgart: swapper tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
@@ -452,11 +464,14 @@
[drm] nouveau 0000:01:00.0: Saving VGA fonts
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
+[drm] nouveau 0000:01:00.0: 0 available performance level(s)
+[drm] nouveau 0000:01:00.0: c: core 425MHz memory 501MHz voltage 1350mV
+[drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
-[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003da11400
+[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003e314c00
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2)
@@ -466,12 +481,11 @@
Console: switching to colour frame buffer device 160x64
fb0: nouveaufb frame buffer device
drm: registered panic notifier
-[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
+[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
brd: module loaded
sata_nv 0000:00:0a.0: version 3.5
ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
--
+NFS: Registering the id_resolver key type
it87: Found IT8712F chip at 0xd00, revision 7
it87: VID is disabled (pins used for GPIO)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
> The VGA is one of two outputs in use: the other (DVI) output works
> normally. The card also has an unused TV-out port, FWIW.
>
> The card is an NV36 generation (Geforce FX5700 AGP). This is a
> regression from Linux 3.2 -- unfortunately, bisection has proved
> extremely difficult because the intermediate kernels git is asking me
> to test panic immediately on boot (and compiling Linux takes a fairly
> long time on this box too). The failed attempt went like this:
>
> git bisect start 'drivers/gpu'
> # bad: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3
> git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7
> # good: [805a6af8dba5dfdd35ec35dc52ec0122400b2610] Linux 3.2
> git bisect good 805a6af8dba5dfdd35ec35dc52ec0122400b2610
> # skip: [5d56fe5fd794a98c4f446f8665fd06b82e93ff64] Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-core-next
> git bisect skip 5d56fe5fd794a98c4f446f8665fd06b82e93ff64
> # good: [dffc9ceb55695f121adc57dd1fde7304c3afe81e] gma500: kill virtual mapping support
> git bisect good dffc9ceb55695f121adc57dd1fde7304c3afe81e
> # skip: [5c2a5ce689c99037771a6c110374461781a6f042] drm: add missing exports for i810 driver.
> git bisect skip 5c2a5ce689c99037771a6c110374461781a6f042
> # skip: [44517c44496062180a6376cc704b33129441ce60] drm/radeon/kms: Add an MSI quirk for Dell RS690
> git bisect skip 44517c44496062180a6376cc704b33129441ce60
>
> (I stopped at this point)
>
> I'm running the latest git xf86-video-nouveau, but since the issue
> occurs at the console it's probably not too important...
Please let me know if you need any more info,
--
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)
[-- Attachment #2: nouveau-3.2.13.log.gz --]
[-- Type: application/octet-stream, Size: 10448 bytes --]
[-- Attachment #3: nouveau-3.3.1.log.gz --]
[-- Type: application/octet-stream, Size: 10298 bytes --]
[-- Attachment #4: nouveau-3.4-rc1+.log.gz --]
[-- Type: application/octet-stream, Size: 10747 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Regression: black screen on VGA w/ nouveau in Linux 3.3
2012-04-04 1:27 ` Nick Bowler
@ 2012-04-18 2:01 ` Nick Bowler
0 siblings, 0 replies; 4+ messages in thread
From: Nick Bowler @ 2012-04-18 2:01 UTC (permalink / raw)
To: linux-kernel, dri-devel; +Cc: Tom Bylander, David Airlie, Ben Skeggs
On 2012-04-03 21:27 -0400, Nick Bowler wrote:
> CCing Tom Bylander as he sent me a mail off-list saying he experiences
> a similar issue on an FX 5200.
>
> Tom, maybe you'll have better luck bisecting this than I did?
>
> On 2012-03-19 10:35 -0400, Nick Bowler wrote:
> > Just upgraded to Linux 3.3 on my desktop and noticed that the VGA output
> > on my card w/ nouveau is totally black (both at the console and in X).
> > Almost everything appears to work normally: DPMS works, modesetting
> > works, DDC works... all messages indicate that things are working --
> > just the image is completely black.
>
> OK, so this is still reproducible on Linux 3.4-rc1+ (Linus' master). I
> captured the dmesg output before (3.2.13, which is a working kernel),
> and after (3.3.1 and 3.4-rc1-00144-g01627d9 - both fail in an identical
> manner). All three logs are attached in full (gzipped).
Ping? I'm still seeing this on 3.4-rc3+. Is there any other info that
I need to provide?
> One thing that immediately jumps out is the WARNING in the 3.4-rc1+ log
> that occurs early and did not appear in either of the other logs:
>
> ------------[ cut here ]------------
> WARNING: at /home/nick/misc/linux-2.6/arch/x86/pci/i386.c:60
> pcibios_fwaddrmap_lookup+0x1d/0x3d()
> Hardware name: K8N-E-Deluxe
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 3.4.0-rc1-00144-g01627d9 #47
> Call Trace:
> [<ffffffff81026baf>] warn_slowpath_common+0x80/0x98
> [<ffffffff81026bdc>] warn_slowpath_null+0x15/0x17
> [<ffffffff8129f79f>] pcibios_fwaddrmap_lookup+0x1d/0x3d
> [<ffffffff81687306>] pcibios_allocate_resources+0xd4/0x217
> [<ffffffff81688447>] ? pci_legacy_init+0x3e/0x3e
> [<ffffffff81687460>] pcibios_resource_survey+0x17/0x2d
> [<ffffffff81688dfd>] pcibios_init+0x28/0x3a
> [<ffffffff8168848e>] pci_subsys_init+0x47/0x4d
> [<ffffffff810002e2>] do_one_initcall+0x78/0x126
> [<ffffffff81662bab>] kernel_init+0xe9/0x17a
> [<ffffffff8166248a>] ? rdinit_setup+0x28/0x28
> [<ffffffff8131ac44>] kernel_thread_helper+0x4/0x10
> [<ffffffff81662ac2>] ? start_kernel+0x321/0x321
> [<ffffffff8131ac40>] ? gs_change+0xb/0xb
> ---[ end trace 4eaa2a86a8e2da22 ]---
>
> Other than that, I diffed the 3.2.13 log and 3.4-rc1+ log and grepped
> for nouveau-related differences. I see no obvious errors, but I admit
> that I don't really know what to look for.
>
> % diff -u nouveau-3.2.13.log nouveau-3.4-rc1+.log | grep -C3 '\[drm\]'
>
> @@ -418,19 +429,21 @@
> Real Time Clock Driver v1.12b
> Linux agpgart interface v0.103
> [drm] Initialized drm 1.1.0 20060810
> +VGA switcheroo: detected Optimus DSM method \ handle
> ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19
> -nouveau 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19 (level, low) -> IRQ 19
> [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436200a1)
> -[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
> +[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
> [drm] nouveau 0000:01:00.0: ... appears to be valid
> +[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
> [drm] nouveau 0000:01:00.0: BMP BIOS found
> [drm] nouveau 0000:01:00.0: BMP version 5.40
> [drm] nouveau 0000:01:00.0: Bios version 04.36.20.21
> -[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
> -[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
> -[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
> -[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04000302 00000000
> -[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000303
> +[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
> +[drm] nouveau 0000:01:00.0: DCB version 2.2
> +[drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00009c40
> +[drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 00009c40
> +[drm] nouveau 0000:01:00.0: DCB outp 02: 04000302 00000000
> +[drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000303
> [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF01D
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF4E1
> @@ -439,11 +452,10 @@
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF8B3
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF8D0
> [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF959
> -[drm] nouveau 0000:01:00.0: 0 available performance level(s)
> -[drm] nouveau 0000:01:00.0: c: core 425MHz memory 501MHz voltage 1350mV
> -[TTM] Zone kernel: Available graphics memory: 512160 kiB.
> -[TTM] Initializing pool allocator.
> -[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
> +[TTM] Zone kernel: Available graphics memory: 512142 kiB
> +[TTM] Initializing pool allocator
> +[TTM] Initializing DMA pool allocator
> +[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (DDR1)
> agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
> agpgart: swapper tried to set rate=x12. Setting to AGP3 x8 mode.
> agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
> @@ -452,11 +464,14 @@
> [drm] nouveau 0000:01:00.0: Saving VGA fonts
> [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [drm] No driver support for vblank timestamp query.
> +[drm] nouveau 0000:01:00.0: 0 available performance level(s)
> +[drm] nouveau 0000:01:00.0: c: core 425MHz memory 501MHz voltage 1350mV
> +[drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table
> [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
> [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
> [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
> [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
> -[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003da11400
> +[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003e314c00
> fbcon: nouveaufb (fb0) is primary device
> [drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table
> [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2)
> @@ -466,12 +481,11 @@
> Console: switching to colour frame buffer device 160x64
> fb0: nouveaufb frame buffer device
> drm: registered panic notifier
> -[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
> +[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
> brd: module loaded
> sata_nv 0000:00:0a.0: version 3.5
> ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
> --
> +NFS: Registering the id_resolver key type
> it87: Found IT8712F chip at 0xd00, revision 7
> it87: VID is disabled (pins used for GPIO)
> [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>
> > The VGA is one of two outputs in use: the other (DVI) output works
> > normally. The card also has an unused TV-out port, FWIW.
> >
> > The card is an NV36 generation (Geforce FX5700 AGP). This is a
> > regression from Linux 3.2 -- unfortunately, bisection has proved
> > extremely difficult because the intermediate kernels git is asking me
> > to test panic immediately on boot (and compiling Linux takes a fairly
> > long time on this box too). The failed attempt went like this:
> >
> > git bisect start 'drivers/gpu'
> > # bad: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3
> > git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7
> > # good: [805a6af8dba5dfdd35ec35dc52ec0122400b2610] Linux 3.2
> > git bisect good 805a6af8dba5dfdd35ec35dc52ec0122400b2610
> > # skip: [5d56fe5fd794a98c4f446f8665fd06b82e93ff64] Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-core-next
> > git bisect skip 5d56fe5fd794a98c4f446f8665fd06b82e93ff64
> > # good: [dffc9ceb55695f121adc57dd1fde7304c3afe81e] gma500: kill virtual mapping support
> > git bisect good dffc9ceb55695f121adc57dd1fde7304c3afe81e
> > # skip: [5c2a5ce689c99037771a6c110374461781a6f042] drm: add missing exports for i810 driver.
> > git bisect skip 5c2a5ce689c99037771a6c110374461781a6f042
> > # skip: [44517c44496062180a6376cc704b33129441ce60] drm/radeon/kms: Add an MSI quirk for Dell RS690
> > git bisect skip 44517c44496062180a6376cc704b33129441ce60
> >
> > (I stopped at this point)
> >
> > I'm running the latest git xf86-video-nouveau, but since the issue
> > occurs at the console it's probably not too important...
Thanks,
--
Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/)
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-04-18 2:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-19 14:35 Regression: black screen on VGA w/ nouveau in Linux 3.3 Nick Bowler
2012-03-23 19:50 ` Maciej Rutecki
2012-04-04 1:27 ` Nick Bowler
2012-04-18 2:01 ` Nick Bowler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).