From: Borislav Petkov <bp@alien8.de>
To: 王炜 <wei_wang@realsil.com.cn>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
"devel@linuxdriverproject.org" <devel@linuxdriverproject.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"cjb@laptop.org" <cjb@laptop.org>,
"arnd@arndb.de" <arnd@arndb.de>,
"sameo@linux.intel.com" <sameo@linux.intel.com>
Subject: Re: 答复: [PATCH v2 0/2] Add modules to support realtek PCIE card reader
Date: Tue, 14 Aug 2012 18:14:20 +0200 [thread overview]
Message-ID: <20120814161420.GA6971@x1.osrc.amd.com> (raw)
In-Reply-To: <637A8844983F7F4092120E33EA3F28CD31E74BE133@RSEX1.realsil.com.cn>
On Tue, Aug 14, 2012 at 11:22:38PM +0800, 王炜 wrote:
> Hi Boris:
>
> Can you tell me the detailed information about your pc and the SD
> card? Do you have ever tried to use another SD card? I have tested
> all of the SD cards that we have in our company, and everything runs
> smoothly. Maybe it is compatibilty issue and we have to debug it
> specifically.
>
> Please help to check the VID:PID of the card reader using lspci, and I
> will send you our SCSI driver for this reader to test the card.
Ok,
here's some info:
* Card is: http://tinyurl.com/cadsmb9
It is in German but should be clear. Otherwise, ask me.
* lspci output:
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
...
03:00.0 ff00: 10ec:5209 (rev 01)
Subsystem: 17aa:21ec
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f0400000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 00-00-00-01-00-4c-e0-00
HTH.
--
Regards/Gruss,
Boris.
prev parent reply other threads:[~2012-08-14 16:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 10:40 [PATCH v2 0/2] Add modules to support realtek PCIE card reader wei_wang
2012-08-14 10:40 ` [PATCH v2 1/2] drivers/mfd: Add realtek pcie card reader driver wei_wang
2012-08-15 6:40 ` Arnd Bergmann
2012-08-16 21:25 ` Tejun Heo
2012-08-14 10:40 ` [PATCH v2 2/2] drivers/mmc: Add realtek pcie sdmmc host driver wei_wang
2012-08-14 15:05 ` [PATCH v2 0/2] Add modules to support realtek PCIE card reader Borislav Petkov
[not found] ` <637A8844983F7F4092120E33EA3F28CD31E74BE133@RSEX1.realsil.com.cn>
2012-08-14 16:14 ` Borislav Petkov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120814161420.GA6971@x1.osrc.amd.com \
--to=bp@alien8.de \
--cc=arnd@arndb.de \
--cc=cjb@laptop.org \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=wei_wang@realsil.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).