* [NEW DRIVER V3 0/8] DA9058 PMIC - please comment on this new driver
@ 2012-08-15 15:05 Anthony Olech
0 siblings, 0 replies; only message in thread
From: Anthony Olech @ 2012-08-15 15:05 UTC (permalink / raw)
To: LKML
Cc: Alessandro Zummo, Andrew Jones, Andrew Morton, Anton Vorontov,
Arnd Bergmann, Ashish Jangam, Axel Lin, David Woodhouse,
Dmitry Torokhov, Eric Andersson, Grant Likely, Guenter Roeck,
Jean Delvare, Jonathan Cameron, Liam Girdwood, Linus Walleij,
linux-iio, linux-input, lm-sensors, Mark Brown,
Mauro Carvalho Chehab, Michael Krufky, Paul Gortmaker,
Randy Dunlap, rtc-linux, Samuel Ortiz, Steven Toth
This is submission attempt number 3 to have this driver included in
the linux kernel source tree. This is the driver for the Dialog DA9058.
The DA9058 is a low power Power Management Integrated Circuit with extra
functionality. It is a Multi Function Device controlled only from an I2C
bus whose components can raise an interrupt request on a single IRQ line.
The driver for the DA9058 consists of a core (i2c) device driver that
instantiates the individual component device drivers for:
adc - 5 ADC channels
gpio - 2 available pins
onkey - 1 device
regulator - 4 BUCKS, 19 LDO and 3 fixed
rtc - low power clock
hwmon - 5 monitored voltages/temperatures
power - battery information
All the above seven component device drivers depend on the 'core'
component driver, which is number one in the patch series.
This driver has been tested on a Samsung SMDK6410 connected to a Dialog
DA9058 Evaluation Board via one GPIO and a 3-wire I2C connection.
All the components can be builtin to the kernel or compiled as modules.
As far as I can tell, all the latest APIs both for the core driver and
all the component drivers have been adhered to, but if I have missed
something please let me know.
Many thanks,
Anthony Olech, Dialog Semiconductor Ltd.
Tony Olech (at Home) (8):
DA9058 MFD core driver
DA9058 ADC driver
DA9058 ONKEY driver
DA9058 POWER driver
DA9058 RTC driver
DA9058 GPIO driver
DA9058 HWMON driver
DA9058 REGULATOR driver
Documentation/hwmon/da9058 | 30 ++
drivers/gpio/Kconfig | 12 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-da9058.c | 367 +++++++++++++
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/da9058-hwmon.c | 425 +++++++++++++++
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/da9058-adc.c | 397 ++++++++++++++
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/da9058_onkey.c | 177 +++++++
drivers/mfd/Kconfig | 18 +
drivers/mfd/Makefile | 3 +
drivers/mfd/da9058-core.c | 83 +++
drivers/mfd/da9058-i2c.c | 97 ++++
drivers/mfd/da9058-info.c | 935 ++++++++++++++++++++++++++++++++++
drivers/mfd/da9058-irq.c | 56 ++
drivers/power/Kconfig | 10 +
drivers/power/Makefile | 1 +
drivers/power/da9058_power.c | 397 ++++++++++++++
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/da9058-regulator.c | 251 +++++++++
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-da9058.c | 458 +++++++++++++++++
include/linux/mfd/da9058/bat.h | 33 ++
include/linux/mfd/da9058/codec.h | 22 +
include/linux/mfd/da9058/conf.h | 22 +
include/linux/mfd/da9058/core.h | 66 +++
include/linux/mfd/da9058/gpio.h | 19 +
include/linux/mfd/da9058/hwmon.h | 36 ++
include/linux/mfd/da9058/i2c.h | 22 +
include/linux/mfd/da9058/irq.h | 50 ++
include/linux/mfd/da9058/onkey.h | 17 +
include/linux/mfd/da9058/pdata.h | 32 ++
include/linux/mfd/da9058/registers.h | 480 +++++++++++++++++
include/linux/mfd/da9058/regulator.h | 33 ++
include/linux/mfd/da9058/rtc.h | 17 +
41 files changed, 4623 insertions(+), 0 deletions(-)
create mode 100644 Documentation/hwmon/da9058
create mode 100644 drivers/gpio/gpio-da9058.c
create mode 100644 drivers/hwmon/da9058-hwmon.c
create mode 100644 drivers/iio/adc/da9058-adc.c
create mode 100644 drivers/input/misc/da9058_onkey.c
create mode 100644 drivers/mfd/da9058-core.c
create mode 100644 drivers/mfd/da9058-i2c.c
create mode 100644 drivers/mfd/da9058-info.c
create mode 100644 drivers/mfd/da9058-irq.c
create mode 100644 drivers/power/da9058_power.c
create mode 100644 drivers/regulator/da9058-regulator.c
create mode 100644 drivers/rtc/rtc-da9058.c
create mode 100644 include/linux/mfd/da9058/bat.h
create mode 100644 include/linux/mfd/da9058/codec.h
create mode 100644 include/linux/mfd/da9058/conf.h
create mode 100644 include/linux/mfd/da9058/core.h
create mode 100644 include/linux/mfd/da9058/gpio.h
create mode 100644 include/linux/mfd/da9058/hwmon.h
create mode 100644 include/linux/mfd/da9058/i2c.h
create mode 100644 include/linux/mfd/da9058/irq.h
create mode 100644 include/linux/mfd/da9058/onkey.h
create mode 100644 include/linux/mfd/da9058/pdata.h
create mode 100644 include/linux/mfd/da9058/registers.h
create mode 100644 include/linux/mfd/da9058/regulator.h
create mode 100644 include/linux/mfd/da9058/rtc.h
--
end-of-patch for NEW DRIVER V3
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-08-15 15:18 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-08-15 15:05 [NEW DRIVER V3 0/8] DA9058 PMIC - please comment on this new driver Anthony Olech
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).