[ 00/85] 3.4.11-stable review

[ 00/85] 3.4.11-stable review

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

This is the start of the stable review cycle for the 3.4.11 release.
There are 85 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Sep 14 23:35:39 UTC 2012.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.11-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Shortlog of commits:

Patch Name                                                  	Original Commit ID	Author
USB: vt6656: remove __devinit* from the struct usb_device_id	4d088876f24887cd15a2	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: emi62: remove __devinit* from the struct usb_device_id 	83957df21dd94655d2b0	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ALSA: hda - fix Copyright debug message                     	088c820b732dbfd515fc	Wang Xingchao <xingchao.wang@intel.com>
ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_V	3d9fb0038a9b02febb01	Will Deacon <will.deacon@arm.com>
ARM: 7487/1: mm: avoid setting nG bit for user mappings that	47f1204329237a0f8655	Will Deacon <will.deacon@arm.com>
ARM: 7488/1: mm: use 5 bits for swapfile type encoding      	f5f2025ef3e2cdb59370	Will Deacon <will.deacon@arm.com>
ARM: 7489/1: errata: fix workaround for erratum #720789 on U	730a8128cd8978467eb1	Will Deacon <will.deacon@arm.com>
ARM: OMAP2+: Fix dmtimer set source clock failure           	54f32a35f4d3a653a18a	Jon Hunter <jon-hunter@ti.com>
ARM: S3C24XX: Add missing DMACH_DT_PROP                     	e1267371eacf2cbcf580	Heiko Stuebner <heiko@sntech.de>
ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters            	b01858c7806e7e6f6121	Heiko Stuebner <heiko@sntech.de>
Revert dma: imx-dma: Fix kernel crash due to missing clock c	upstream.	Fabio Estevam <festevam@gmail.com>
xen/setup: Fix one-off error when adding for-balloon PFNs to	c96aae1f7f393387d160	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
ARM: imx6: spin the cpu until hardware takes it down        	c944b0b9354ea06ffb0c	Shawn Guo <shawn.guo@linaro.org>
ARM: imx: select CPU_FREQ_TABLE when needed                 	f637c4c9405e21f44cf0	Arnd Bergmann <arnd@arndb.de>
ASoC: wm9712: Fix microphone source selection               	ccf795847a38235ee4a5	Mark Brown <broonie@opensource.wolfsonmicro.com>
ASoC: omap-mcbsp: Fix 6pin mux configuration                	d0db84e713eaaccea2a4	Peter Ujfalusi <peter.ujfalusi@ti.com>
vfs: missed source of ->f_pos races                         	0e665d5d1125f9f4ccff	Al Viro <viro@ZenIV.linux.org.uk>
vfs: canonicalize create mode in build_open_flags()         	e68726ff72cf7ba5e7d7	Miklos Szeredi <mszeredi@suse.cz>
alpha: fix fpu.h usage in userspace                         	0be421862b857e619644	Mike Frysinger <vapier@gentoo.org>
alpha: Don't export SOCK_NONBLOCK to user space.            	a2fa3ccd7b43665fe14c	Michael Cree <mcree@orcon.net.nz>
USB: winbond: remove __devinit* from the struct usb_device_i	43a34695d9cd79c6659f	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mm: hugetlbfs: correctly populate shared pmd                	eb48c071464757414538	Michal Hocko <mhocko@suse.cz>
ALSA: hda - don't create dysfunctional mixer controls for ca	c41999a23929f30808ba	David Henningsson <david.henningsson@canonical.com>
target: fix NULL pointer dereference bug alloc_page() fails 	d0e27c88d795fb964715	Yi Zou <yi.zou@intel.com>
NFSv3: Ensure that do_proc_get_root() reports errors correct	086600430493e04b802b	Trond Myklebust <Trond.Myklebust@netapp.com>
pnfs: defer release of pages in layoutget                   	8554116e17eef055d9dd	Idan Kedar <idank@tonian.com>
NFSv4.1: Remove a bogus BUG_ON() in nfs4_layoutreturn_done  	47fbf7976e0b7d9dcdd7	Trond Myklebust <Trond.Myklebust@netapp.com>
NFS: Clear key construction data if the idmap upcall fails  	c5066945b7ea346a1142	Bryan Schumaker <bjschuma@netapp.com>
NFS: return -ENOKEY when the upcall fails to map the name   	12dfd080556124088ed6	Bryan Schumaker <bjschuma@netapp.com>
UBIFS: fix complaints about too small debug buffer size     	65b455b123c7e2b835a0	Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Bluetooth: Fix using NULL inquiry entry                     	c810089c27e48b816181	Ram Malovany <ramm@ti.com>
Bluetooth: Fix using a NULL inquiry cache entry             	7cc8380eb10347016d95	Ram Malovany <ramm@ti.com>
Bluetooth: Set name_state to unknown when entry name is empt	c3e7c0d90b14a3e7ac09	Ram Malovany <ramm@ti.com>
Bluetooth: Fix legacy pairing with some devices             	a9ea3ed9b71cc3271dd5	Szymon Janc <szymon.janc@tieto.com>
NFS: Alias the nfs module to nfs4                           	425e776d93a7a5070b77	"bjschuma@gmail.com" <bjschuma@gmail.com>
audit: don't free_chunk() after fsnotify_add_mark()         	0fe33aae0e94b4097dd4	Miklos Szeredi <mszeredi@suse.cz>
audit: fix refcounting in audit-tree                        	a2140fc0cb0325bb6384	Miklos Szeredi <mszeredi@suse.cz>
drm: stop vmgfx driver explosion                            	f5869a8308f77e3dfdc2	Alan Cox <alan@linux.intel.com>
Revert "drm/radeon: fix bo creation retry path"             	676bc2e1e4f9072f7a64	Alex Deucher <alexander.deucher@amd.com>
svcrpc: fix BUG() in svc_tcp_clear_pages                    	be1e44441a560c43c136	"J. Bruce Fields" <bfields@redhat.com>
svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping          	d10f27a750312ed5638c	"J. Bruce Fields" <bfields@redhat.com>
svcrpc: sends on closed socket should stop immediately      	f06f00a24d76e168ecb3	"J. Bruce Fields" <bfields@redhat.com>
cciss: fix incorrect scsi status reporting                  	b0cf0b118c90477d1a68	"Stephen M. Cameron" <scameron@beardog.cce.hp.com>
ACPI: export symbol acpi_get_table_with_size                	4f81f986761a7663db7d	Alex Deucher <alexander.deucher@amd.com>
ath9k: fix decrypt_error initialization in ath_rx_tasklet() 	e1352fde5682ab1bdd2a	Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
PCI: EHCI: Fix crash during hibernation on ASUS computers   	0b68c8e2c3afaf9807eb	"Rafael J. Wysocki" <rjw@sisk.pl>
block: replace __getblk_slow misfix by grow_dev_page fix    	676ce6d5ca3098339c02	Hugh Dickins <hughd@google.com>
sched,cgroup: Fix up task_groups list                       	35cf4e50b16331def6cf	Mike Galbraith <efault@gmx.de>
sched: fix divide by zero at {thread_group,task}_times      	bea6832cc8c4a0a9a65d	Stanislaw Gruszka <sgruszka@redhat.com>
[media] uvcvideo: Reset the bytesused field when recycling a	8a3f0ede2b3f54771220	Jayakrishnan Memana <jayakrishnan.memana@maxim-ic.com>
rapidio/tsi721: fix inbound doorbell interrupt handling     	3670e7e12e582c6d6776	Alexandre Bounine <alexandre.bounine@idt.com>
rapidio/tsi721: fix unused variable compiler warning        	9a9a9a7adafe62a34de8	Alexandre Bounine <alexandre.bounine@idt.com>
regulator: twl-regulator: fix up VINTANA1/VINTANA2          	908d6d52928a7f2a4b31	Aaro Koskinen <aaro.koskinen@iki.fi>
x32: Use compat shims for {g,s}etsockopt                    	515c7af85ed92696c311	Mike Frysinger <vapier@gentoo.org>
USB: spca506: remove __devinit* from the struct usb_device_i	e694d518886c7afedcdd	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: jl2005bcd: remove __devinit* from the struct usb_device	ec063351684298e295dc	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: p54usb: remove __devinit* from the struct usb_device_id	b9c4167cbbafddac3462	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: rtl8187: remove __devinit* from the struct usb_device_i	a3433179d0822ccfa8e8	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: smsusb: remove __devinit* from the struct usb_device_id	d04dbd1c0ec17a13326c	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: CDC ACM: Fix NULL pointer dereference                  	99f347caa4568cb80386	Sven Schnelle <svens@stackframe.org>
powerpc: Update DSCR on all CPUs when writing sysfs dscr_def	1b6ca2a6fe56e7697d57	Anton Blanchard <anton@samba.org>
powerpc: Keep thread.dscr and thread.dscr_inherit in sync   	00ca0de02f80924dfff6	Anton Blanchard <anton@samba.org>
powerpc: Fix DSCR inheritance in copy_thread()              	1021cb268b3025573c48	Anton Blanchard <anton@samba.org>
powerpc: Restore correct DSCR in context switch             	714332858bfd40dcf8f7	Anton Blanchard <anton@samba.org>
powerpc: Make sure IPI handlers see data written by IPI send	9fb1b36ca1234e64a5d1	Paul Mackerras <paulus@samba.org>
Remove user-triggerable BUG from mpol_to_str                	80de7c3138ee9fd86a98	Dave Jones <davej@redhat.com>
Fix order of arguments to compat_put_time[spec|val]         	ed6fe9d614fc1bca95eb	Mikulas Patocka <mpatocka@redhat.com>
SCSI: megaraid_sas: Move poll_aen_lock initializer          	bd8d6dd43a77bfd2b8fe	Kashyap Desai <Kashyap.Desai@lsi.com>
SCSI: scsi_lib: fix scsi_io_completion's SG_IO error propaga	27c419739b67decced46	Mike Snitzer <snitzer@redhat.com>
SCSI: mpt2sas: Fix for Driver oops, when loading driver with	338b131a3269881c7431	"sreekanth.reddy@lsi.com" <sreekanth.reddy@lsi.com>
SCSI: Fix 'Device not ready' issue on mpt2sas               	14216561e164671ce147	James Bottomley <JBottomley@Parallels.com>
udf: Fix data corruption for files in ICB                   	9c2fc0de1a6e638fe58c	Jan Kara <jack@suse.cz>
ext3: Fix fdatasync() for files with only i_size changes    	156bddd8e505b295540f	Jan Kara <jack@suse.cz>
fuse: fix retrieve length                                   	c9e67d483776d8d2a5f3	Miklos Szeredi <mszeredi@suse.cz>
i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLA	e68bb91baa0bb9817567	Axel Lin <axel.lin@gmail.com>
i2c-i801: Add Device IDs for Intel Lynx Point-LP PCH        	4a8f1ddde942e232387e	James Ralston <james.d.ralston@intel.com>
HID: add NOGET quirk for Eaton Ellipse MAX UPS              	67ddbb3e6568fb1820b2	Alan Stern <stern@rowland.harvard.edu>
Input: i8042 - add Gigabyte T1005 series netbooks to noloop 	7b125b94ca16b7e618c6	Dmitry Torokhov <dmitry.torokhov@gmail.com>
drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at boot 	c4903429a92be60e6fe5	Dave Airlie <airlied@redhat.com>
PARISC: Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the c	bba3d8c3b3c0f2123be5	Mel Gorman <mgorman@suse.de>
xen: Use correct masking in xen_swiotlb_alloc_coherent.     	b5031ed1be0aa4192505	Ronny Hegewald <ronny.hegewald@online.de>
xen/pciback: Fix proper FLR steps.                          	80ba77dfbce85f2d1be5	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
x86, microcode, AMD: Fix broken ucode patch size check      	36bf50d7697be18c6bfd	Andreas Herrmann <andreas.herrmann3@amd.com>
dccp: check ccid before dereferencing                       	276bdb82dedb29051146	Mathias Krause <minipli@googlemail.com>
hwmon: (asus_atk0110) Add quirk for Asus M5A78L             	43ca6cb28c871f2fbad1	Luca Tettamanti <kronos.it@gmail.com>

-------------

Diffstat:

 Documentation/i2c/busses/i2c-i801          |    1 +
 Makefile                                   |    4 ++--
 arch/alpha/include/asm/fpu.h               |    2 ++
 arch/alpha/include/asm/socket.h            |    2 ++
 arch/arm/Kconfig                           |    1 +
 arch/arm/include/asm/pgtable.h             |   40 +++++++++++++++++++++-------------------
 arch/arm/mach-imx/hotplug.c                |   23 +++--------------------
 arch/arm/mach-s3c24xx/include/mach/dma.h   |    3 ++-
 arch/arm/mm/flush.c                        |    2 --
 arch/arm/mm/tlb-v7.S                       |    6 +++---
 arch/arm/plat-omap/dmtimer.c               |    2 +-
 arch/arm/plat-s3c24xx/dma.c                |    2 +-
 arch/arm/vfp/vfpmodule.c                   |    2 ++
 arch/parisc/include/asm/atomic.h           |    4 ++--
 arch/powerpc/kernel/asm-offsets.c          |    1 +
 arch/powerpc/kernel/dbell.c                |    2 ++
 arch/powerpc/kernel/entry_64.S             |   23 +++++++++++++++++------
 arch/powerpc/kernel/process.c              |   12 ++----------
 arch/powerpc/kernel/smp.c                  |   11 +++++++++--
 arch/powerpc/kernel/sysfs.c                |   10 ++++++++++
 arch/powerpc/kernel/traps.c                |    3 ++-
 arch/powerpc/sysdev/xics/icp-hv.c          |    6 +++++-
 arch/x86/kernel/microcode_amd.c            |    7 ++++---
 arch/x86/mm/hugetlbpage.c                  |   21 ++++++++++++++++-----
 arch/x86/syscalls/syscall_64.tbl           |    6 ++++--
 arch/x86/xen/setup.c                       |    9 ++++++++-
 drivers/acpi/acpica/tbxface.c              |    1 +
 drivers/block/cciss_scsi.c                 |   11 +----------
 drivers/dma/imx-dma.c                      |   36 +++++++++++-------------------------
 drivers/gpu/drm/radeon/radeon_object.c     |    3 +--
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c        |    1 +
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c        |    6 +++++-
 drivers/hid/usbhid/hid-quirks.c            |    1 +
 drivers/hwmon/asus_atk0110.c               |    6 ++++++
 drivers/i2c/busses/Kconfig                 |    6 ++++++
 drivers/i2c/busses/Makefile                |    5 +++--
 drivers/i2c/busses/i2c-designware-core.c   |   11 +++++++++++
 drivers/i2c/busses/i2c-i801.c              |    3 +++
 drivers/input/serio/i8042-x86ia64io.h      |   14 ++++++++++++++
 drivers/media/dvb/siano/smsusb.c           |    2 +-
 drivers/media/video/gspca/jl2005bcd.c      |    2 +-
 drivers/media/video/gspca/spca506.c        |    2 +-
 drivers/media/video/uvc/uvc_queue.c        |    1 +
 drivers/net/wireless/ath/ath9k/recv.c      |    2 +-
 drivers/net/wireless/p54/p54usb.c          |    2 +-
 drivers/net/wireless/rtl818x/rtl8187/dev.c |    2 +-
 drivers/pci/pci-driver.c                   |    7 +++++++
 drivers/rapidio/devices/tsi721.c           |   12 +++++++++++-
 drivers/regulator/twl-regulator.c          |    4 ++--
 drivers/scsi/megaraid/megaraid_sas_base.c  |    3 ++-
 drivers/scsi/mpt2sas/mpt2sas_base.c        |   13 ++++++++-----
 drivers/scsi/scsi_error.c                  |   10 ++++++++++
 drivers/scsi/scsi_lib.c                    |    5 ++++-
 drivers/scsi/scsi_scan.c                   |   10 ++++++++++
 drivers/staging/vt6656/main_usb.c          |    2 +-
 drivers/staging/winbond/wbusb.c            |    2 +-
 drivers/target/target_core_transport.c     |    4 ++--
 drivers/usb/class/cdc-acm.c                |    3 ++-
 drivers/usb/misc/emi62.c                   |    2 +-
 drivers/xen/swiotlb-xen.c                  |    2 +-
 drivers/xen/xen-pciback/pci_stub.c         |    8 ++++----
 fs/buffer.c                                |   66 ++++++++++++++++++++++++++++++------------------------------------
 fs/compat.c                                |   10 ++++++++--
 fs/ext3/inode.c                            |   17 ++++++++++++++---
 fs/fuse/dev.c                              |    1 +
 fs/nfs/idmap.c                             |   62 ++++++++++++++++++++++++++++++++++++++++++++------------------
 fs/nfs/nfs3proc.c                          |    2 +-
 fs/nfs/nfs4proc.c                          |   65 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------
 fs/nfs/pnfs.c                              |   39 +--------------------------------------
 fs/nfs/pnfs.h                              |    2 +-
 fs/nfs/super.c                             |    2 ++
 fs/open.c                                  |    7 ++++---
 fs/ubifs/debug.h                           |    2 +-
 fs/udf/file.c                              |   35 +++++++++++++++++++++++++++++------
 kernel/audit_tree.c                        |   11 +++++------
 kernel/sched/core.c                        |   35 +++++++++++++++++++++--------------
 kernel/sched/sched.h                       |    2 +-
 mm/mempolicy.c                             |    2 +-
 net/bluetooth/hci_event.c                  |   28 ++++++++++++++++++++++------
 net/bluetooth/l2cap_core.c                 |    1 +
 net/dccp/ccid.h                            |    4 ++--
 net/socket.c                               |    4 ++--
 net/sunrpc/svc_xprt.c                      |   10 ++++------
 net/sunrpc/svcsock.c                       |    2 +-
 sound/pci/hda/hda_proc.c                   |    2 +-
 sound/pci/hda/patch_ca0132.c               |    8 ++++++++
 sound/soc/codecs/wm9712.c                  |   19 +++++++++++++++++--
 sound/soc/omap/mcbsp.c                     |    2 +-
 88 files changed, 541 insertions(+), 308 deletions(-)

[ 01/85] USB: vt6656: remove __devinit* from the struct usb_device_id table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d088876f24887cd15a29db923f5f37db6a99f21 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Forest Bond <forest@alittletooquiet.net>
CC: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jesper Juhl <jj@chaosbits.net>
CC: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/main_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -222,7 +222,7 @@ DEVICE_PARAM(b80211hEnable, "802.11h mod
 // Static vars definitions
 //
 
-static struct usb_device_id vt6656_table[] __devinitdata = {
+static struct usb_device_id vt6656_table[] = {
 	{USB_DEVICE(VNT_USB_VENDOR_ID, VNT_USB_PRODUCT_ID)},
 	{}
 };

[ 02/85] USB: emi62: remove __devinit* from the struct usb_device_id table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83957df21dd94655d2b026e0944a69ff37b83988 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/emi62.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -256,7 +256,7 @@ wraperr:
 	return err;
 }
 
-static const struct usb_device_id id_table[] __devinitconst = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(EMI62_VENDOR_ID, EMI62_PRODUCT_ID) },
 	{ }                                             /* Terminating entry */
 };

[ 03/85] ALSA: hda - fix Copyright debug message

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wang Xingchao <xingchao.wang@intel.com>

commit 088c820b732dbfd515fc66d459d5f5777f79b406 upstream.

As spec said, 1 indicates no copyright is asserted.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -412,7 +412,7 @@ static void print_digital_conv(struct sn
 	if (digi1 & AC_DIG1_EMPHASIS)
 		snd_iprintf(buffer, " Preemphasis");
 	if (digi1 & AC_DIG1_COPYRIGHT)
-		snd_iprintf(buffer, " Copyright");
+		snd_iprintf(buffer, " Non-Copyright");
 	if (digi1 & AC_DIG1_NONAUDIO)
 		snd_iprintf(buffer, " Non-Audio");
 	if (digi1 & AC_DIG1_PROFESSIONAL)

[ 04/85] ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 3d9fb0038a9b02febb01efc79a4a5d97f1822a90 upstream.

VFPv4 support depends on the VFPv3 context save/restore code, so only
advertise support in the hwcaps if the kernel can actually handle it.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/vfp/vfpmodule.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -719,8 +719,10 @@ static int __init vfp_init(void)
 			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
 				elf_hwcap |= HWCAP_NEON;
 #endif
+#ifdef CONFIG_VFPv3
 			if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
 				elf_hwcap |= HWCAP_VFPv4;
+#endif
 		}
 	}
 	return 0;

[ 05/85] ARM: 7487/1: mm: avoid setting nG bit for user mappings that arent present

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 47f1204329237a0f8655f5a9f14a38ac81946ca1 upstream.

Swap entries are encoding in ptes such that !pte_present(pte) and
pte_file(pte). The remaining bits of the descriptor are used to identify
the swapfile and offset within it to the swap entry.

When writing such a pte for a user virtual address, set_pte_at
unconditionally sets the nG bit, which (in the case of LPAE) will
corrupt the swapfile offset and lead to a BUG:

[  140.494067] swap_free: Unused swap offset entry 000763b4
[  140.509989] BUG: Bad page map in process rs:main Q:Reg  pte:0ec76800 pmd:8f92e003

This patch fixes the problem by only setting the nG bit for user
mappings that are actually present.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/pgtable.h |   34 ++++++++++++++++++----------------
 arch/arm/mm/flush.c            |    2 --
 2 files changed, 18 insertions(+), 18 deletions(-)

--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_
 
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
+#define pte_special(pte)	(0)
+
+#define pte_present_user(pte) \
+	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
+	 (L_PTE_PRESENT | L_PTE_USER))
+
 #if __LINUX_ARM_ARCH__ < 6
 static inline void __sync_icache_dcache(pte_t pteval)
 {
@@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t p
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
-	if (addr >= TASK_SIZE)
-		set_pte_ext(ptep, pteval, 0);
-	else {
+	unsigned long ext = 0;
+
+	if (addr < TASK_SIZE && pte_present_user(pteval)) {
 		__sync_icache_dcache(pteval);
-		set_pte_ext(ptep, pteval, PTE_EXT_NG);
+		ext |= PTE_EXT_NG;
 	}
-}
 
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
-#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
-#define pte_special(pte)	(0)
-
-#define pte_present_user(pte) \
-	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
-	 (L_PTE_PRESENT | L_PTE_USER))
+	set_pte_ext(ptep, pteval, ext);
+}
 
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval)
 	struct page *page;
 	struct address_space *mapping;
 
-	if (!pte_present_user(pteval))
-		return;
 	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
 		/* only flush non-aliasing VIPT caches for exec mappings */
 		return;

[ 06/85] ARM: 7488/1: mm: use 5 bits for swapfile type encoding

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit f5f2025ef3e2cdb593707cbf87378761f17befbe upstream.

Page migration encodes the pfn in the offset field of a swp_entry_t.
For LPAE, we support physical addresses of up to 36 bits (due to
sparsemem limitations with the size of page flags), requiring 24 bits
to represent a pfn. A further 3 bits are used to encode a swp_entry into
a pte, leaving 5 bits for the type field. Furthermore, the core code
defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not
get used.

This patch reduces the width of the type field to 5 bits, allowing us
to create up to 31 swapfiles of 64GB each.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/pgtable.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -253,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <- type --> 0 0 0
+ *   <--------------- offset ----------------------> < type -> 0 0 0
  *
- * This gives us up to 63 swap files and 32GB per swap file.  Note that
+ * This gives us up to 31 swap files and 64GB per swap file.  Note that
  * the offset field is always non-zero.
  */
 #define __SWP_TYPE_SHIFT	3
-#define __SWP_TYPE_BITS		6
+#define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 

[ 07/85] ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 730a8128cd8978467eb1cf546b11014acb57d433 upstream.

Commit 5a783cbc4836 ("ARM: 7478/1: errata: extend workaround for erratum
 #720789") added workarounds for erratum #720789 to the range TLB
invalidation functions with the observation that the erratum only
affects SMP platforms. However, when running an SMP_ON_UP kernel on a
uniprocessor platform we must take care to preserve the ASID as the
workaround is not required.

This patch ensures that we don't set the ASID to 0 when flushing the TLB
on such a system, preserving the original behaviour with the workaround
disabled.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mm/tlb-v7.S |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	dsb
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
-#ifdef CONFIG_ARM_ERRATA_720789
-	mov	r3, #0
-#else
 	asid	r3, r3				@ mask ASID
+#ifdef CONFIG_ARM_ERRATA_720789
+	ALT_SMP(W(mov)	r3, #0	)
+	ALT_UP(W(nop)		)
 #endif
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT

[ 08/85] ARM: OMAP2+: Fix dmtimer set source clock failure

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jon Hunter <jon-hunter@ti.com>

commit 54f32a35f4d3a653a18a2c8c239f19ae060bd803 upstream.

Calling the dmtimer function omap_dm_timer_set_source() fails if following a
call to pm_runtime_put() to disable the timer. For example the following
sequence would fail to set the parent clock ...

	omap_dm_timer_stop(gptimer);
	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);

The following error message would be seen ...

omap_dm_timer_set_source: failed to set timer_32k_ck as parent

The problem is that, by design, pm_runtime_put() simply decrements the usage
count and returns before the timer has actually been disabled. Therefore,
setting the parent clock failed because the timer was still active when the
trying to set the parent clock. Setting a parent clock will fail if the clock
you are setting the parent of has a non-zero usage count. To ensure that this
does not fail use pm_runtime_put_sync() when disabling the timer.

Note that this will not be seen on OMAP1 devices, because these devices do
not use the clock framework for dmtimers.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/plat-omap/dmtimer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -238,7 +238,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 

[ 09/85] ARM: S3C24XX: Add missing DMACH_DT_PROP

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Stuebner <heiko@sntech.de>

commit e1267371eacf2cbcf580e41f9e64a986cdaf5c1d upstream.

Commit 2b90807549 (spi: s3c64xx: add device tree support) requires
the DMACH_DT_PROP element in the dma_ch enum. It's not used on non-DT
platforms but has to be present nevertheless.

So mimic the dummy-add of DMACH_DT_PROP on s3c64xx for s3c24xx
machines, to correct the build breakage for the s3c24xx variants
using the s3c64xx-spi-driver.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-s3c24xx/include/mach/dma.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -24,7 +24,8 @@
 */
 
 enum dma_ch {
-	DMACH_XD0,
+	DMACH_DT_PROP = -1,	/* not yet supported, do not use */
+	DMACH_XD0 = 0,
 	DMACH_XD1,
 	DMACH_SDI,
 	DMACH_SPI0,

[ 10/85] ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Stuebner <heiko@sntech.de>

commit b01858c7806e7e6f6121da2e51c9222fc4d21dc6 upstream.

Commit d670ac019f60 (ARM: SAMSUNG: DMA Cleanup as per sparse) changed the
prototype of the s3c2410_dma_* functions to use the enum dma_ch instead
of an generic unsigned int.

In the s3c24xx dma.c s3c2410_dma_enqueue seems to have been forgotten,
the other functions there were changed correctly.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/plat-s3c24xx/dma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_c
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);

[ 11/85] Revert dma: imx-dma: Fix kernel crash due to missing clock conversion

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

This reverts 9ea2c02bafe276e97b592a046ac733610a6d57fd, which was commit
a2367db2ec5e7fc6fe93e221e0fcdee81b053daf upstream.

It broke the build on 3.4, and was not needed there.

Reported-by: Eric Bénard <eric@eukrea.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/imx-dma.c |   36 +++++++++++-------------------------
 1 file changed, 11 insertions(+), 25 deletions(-)

--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -172,8 +172,7 @@ struct imxdma_engine {
 	struct device_dma_parameters	dma_parms;
 	struct dma_device		dma_device;
 	void __iomem			*base;
-	struct clk			*dma_ahb;
-	struct clk			*dma_ipg;
+	struct clk			*dma_clk;
 	spinlock_t			lock;
 	struct imx_dma_2d_config	slots_2d[IMX_DMA_2D_SLOTS];
 	struct imxdma_channel		channel[IMX_DMA_CHANNELS];
@@ -977,20 +976,10 @@ static int __init imxdma_probe(struct pl
 		return 0;
 	}
 
-	imxdma->dma_ipg = devm_clk_get(&pdev->dev, "ipg");
-	if (IS_ERR(imxdma->dma_ipg)) {
-		ret = PTR_ERR(imxdma->dma_ipg);
-		goto err_clk;
-	}
-
-	imxdma->dma_ahb = devm_clk_get(&pdev->dev, "ahb");
-	if (IS_ERR(imxdma->dma_ahb)) {
-		ret = PTR_ERR(imxdma->dma_ahb);
-		goto err_clk;
-	}
-
-	clk_prepare_enable(imxdma->dma_ipg);
-	clk_prepare_enable(imxdma->dma_ahb);
+	imxdma->dma_clk = clk_get(NULL, "dma");
+	if (IS_ERR(imxdma->dma_clk))
+		return PTR_ERR(imxdma->dma_clk);
+	clk_enable(imxdma->dma_clk);
 
 	/* reset DMA module */
 	imx_dmav1_writel(imxdma, DCR_DRST, DMA_DCR);
@@ -999,14 +988,16 @@ static int __init imxdma_probe(struct pl
 		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", imxdma);
 		if (ret) {
 			dev_warn(imxdma->dev, "Can't register IRQ for DMA\n");
-			goto err_enable;
+			kfree(imxdma);
+			return ret;
 		}
 
 		ret = request_irq(MX1_DMA_ERR, imxdma_err_handler, 0, "DMA", imxdma);
 		if (ret) {
 			dev_warn(imxdma->dev, "Can't register ERRIRQ for DMA\n");
 			free_irq(MX1_DMA_INT, NULL);
-			goto err_enable;
+			kfree(imxdma);
+			return ret;
 		}
 	}
 
@@ -1103,10 +1094,7 @@ err_init:
 		free_irq(MX1_DMA_INT, NULL);
 		free_irq(MX1_DMA_ERR, NULL);
 	}
-err_enable:
-	clk_disable_unprepare(imxdma->dma_ipg);
-	clk_disable_unprepare(imxdma->dma_ahb);
-err_clk:
+
 	kfree(imxdma);
 	return ret;
 }
@@ -1126,9 +1114,7 @@ static int __exit imxdma_remove(struct p
 		free_irq(MX1_DMA_ERR, NULL);
 	}
 
-	clk_disable_unprepare(imxdma->dma_ipg);
-	clk_disable_unprepare(imxdma->dma_ahb);
-	kfree(imxdma);
+        kfree(imxdma);
 
         return 0;
 }

[ 12/85] xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M.

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit c96aae1f7f393387d160211f60398d58463a7e65 upstream.

When we are finished with return PFNs to the hypervisor, then
populate it back, and also mark the E820 MMIO and E820 gaps
as IDENTITY_FRAMEs, we then call P2M to set areas that can
be used for ballooning. We were off by one, and ended up
over-writting a P2M entry that most likely was an IDENTITY_FRAME.
For example:

1-1 mapping on 40000->40200
1-1 mapping on bc558->bc5ac
1-1 mapping on bc5b4->bc8c5
1-1 mapping on bc8c6->bcb7c
1-1 mapping on bcd00->100000
Released 614 pages of unused memory
Set 277889 page(s) to 1-1 mapping
Populating 40200-40466 pfn range: 614 pages added

=> here we set from 40466 up to bc559 P2M tree to be
INVALID_P2M_ENTRY. We should have done it up to bc558.

The end result is that if anybody is trying to construct
a PTE for PFN bc558 they end up with ~PAGE_PRESENT.

Reported-by-and-Tested-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/setup.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -79,9 +79,16 @@ static void __init xen_add_extra_mem(u64
 	memblock_reserve(start, size);
 
 	xen_max_p2m_pfn = PFN_DOWN(start + size);
+	for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) {
+		unsigned long mfn = pfn_to_mfn(pfn);
+
+		if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn))
+			continue;
+		WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n",
+			pfn, mfn);
 
-	for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++)
 		__set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
+	}
 }
 
 static unsigned long __init xen_release_chunk(unsigned long start,

[ 13/85] ARM: imx6: spin the cpu until hardware takes it down

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Guo <shawn.guo@linaro.org>

commit c944b0b9354ea06ffb0c8a7178949f1185f9f499 upstream.

Though commit 602bf40 (ARM: imx6: exit coherency when shutting down
a cpu) improves the stability of imx6q cpu hotplug a lot, there are
still hangs seen with a more stressful hotplug testing.

It's expected that once imx_enable_cpu(cpu, false) is called, the cpu
will be taken down by hardware immediately, and the code after that
will not get any chance to execute.  However, this is not always the
case from the testing.  The cpu could possibly be alive for a few
cycles before hardware actually takes it down.  So rather than letting
cpu execute some code that could cause a hang in these cycles, let's
make the cpu spin there and wait for hardware to take it down.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-imx/hotplug.c |   23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)

--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(vo
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)

[ 14/85] ARM: imx: select CPU_FREQ_TABLE when needed

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit f637c4c9405e21f44cf0045eaf77eddd3a79ca5a upstream.

The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers,
so it needs to select that code to be built. This problem has
apparently existed since the i.MX cpufreq code was first merged
in v2.6.37.

Building IMX without CPU_FREQ_TABLE results in:

arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit':
arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr'
arch/arm/plat-mxc/built-in.o: In function `mxc_set_target':
arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target'
arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed':
arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify'
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init':
arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo'
arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Yong Shen <yong.shen@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2113,6 +2113,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 

[ 15/85] ASoC: wm9712: Fix microphone source selection

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit ccf795847a38235ee4a56a24129ce75147d6ba8f upstream.

Currently the microphone input source is not selectable as while there is
a DAPM widget it's not connected to anything so it won't be properly
instantiated. Add something more correct for the input structure to get
things going, even though it's not hooked into the rest of the routing
map and so won't actually achieve anything except allowing the relevant
register bits to be written.

Reported-by: Christop Fritz <chf.fritz@googlemail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm9712.c |   19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -272,7 +272,7 @@ SOC_DAPM_ENUM("Route", wm9712_enum[9]);
 
 /* Mic select */
 static const struct snd_kcontrol_new wm9712_mic_src_controls =
-SOC_DAPM_ENUM("Route", wm9712_enum[7]);
+SOC_DAPM_ENUM("Mic Source Select", wm9712_enum[7]);
 
 /* diff select */
 static const struct snd_kcontrol_new wm9712_diff_sel_controls =
@@ -291,7 +291,9 @@ SND_SOC_DAPM_MUX("Left Capture Select",
 	&wm9712_capture_selectl_controls),
 SND_SOC_DAPM_MUX("Right Capture Select", SND_SOC_NOPM, 0, 0,
 	&wm9712_capture_selectr_controls),
-SND_SOC_DAPM_MUX("Mic Select Source", SND_SOC_NOPM, 0, 0,
+SND_SOC_DAPM_MUX("Left Mic Select Source", SND_SOC_NOPM, 0, 0,
+	&wm9712_mic_src_controls),
+SND_SOC_DAPM_MUX("Right Mic Select Source", SND_SOC_NOPM, 0, 0,
 	&wm9712_mic_src_controls),
 SND_SOC_DAPM_MUX("Differential Source", SND_SOC_NOPM, 0, 0,
 	&wm9712_diff_sel_controls),
@@ -319,6 +321,7 @@ SND_SOC_DAPM_PGA("Out 3 PGA", AC97_INT_P
 SND_SOC_DAPM_PGA("Line PGA", AC97_INT_PAGING, 2, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Phone PGA", AC97_INT_PAGING, 1, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Mic PGA", AC97_INT_PAGING, 0, 1, NULL, 0),
+SND_SOC_DAPM_PGA("Differential Mic", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MICBIAS("Mic Bias", AC97_INT_PAGING, 10, 1),
 SND_SOC_DAPM_OUTPUT("MONOOUT"),
 SND_SOC_DAPM_OUTPUT("HPOUTL"),
@@ -379,6 +382,18 @@ static const struct snd_soc_dapm_route w
 	{"Mic PGA", NULL, "MIC1"},
 	{"Mic PGA", NULL, "MIC2"},
 
+	/* microphones */
+	{"Differential Mic", NULL, "MIC1"},
+	{"Differential Mic", NULL, "MIC2"},
+	{"Left Mic Select Source", "Mic 1", "MIC1"},
+	{"Left Mic Select Source", "Mic 2", "MIC2"},
+	{"Left Mic Select Source", "Stereo", "MIC1"},
+	{"Left Mic Select Source", "Differential", "Differential Mic"},
+	{"Right Mic Select Source", "Mic 1", "MIC1"},
+	{"Right Mic Select Source", "Mic 2", "MIC2"},
+	{"Right Mic Select Source", "Stereo", "MIC2"},
+	{"Right Mic Select Source", "Differential", "Differential Mic"},
+
 	/* left capture selector */
 	{"Left Capture Select", "Mic", "MIC1"},
 	{"Left Capture Select", "Speaker Mixer", "Speaker Mixer"},

[ 16/85] ASoC: omap-mcbsp: Fix 6pin mux configuration

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

commit d0db84e713eaaccea2a435e1625fb3150b335f4a upstream.

The check for the mux_signal callback was wrong which prevents us to
configure the 6pin port's FSR/CLKR signal mux.

Reported-by: CF Adad <cfadad@rocketmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/omap/mcbsp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -691,7 +691,7 @@ int omap_mcbsp_6pin_src_mux(struct omap_
 {
 	const char *signal, *src;
 
-	if (mcbsp->pdata->mux_signal)
+	if (!mcbsp->pdata->mux_signal)
 		return -EINVAL;
 
 	switch (mux) {

[ 17/85] vfs: missed source of ->f_pos races

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@ZenIV.linux.org.uk>

commit 0e665d5d1125f9f4ccff56a75e814f10f88861a2 upstream.

compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing
as sys_{read,write}{,v}().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/compat.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1160,11 +1160,14 @@ compat_sys_readv(unsigned long fd, const
 	struct file *file;
 	int fput_needed;
 	ssize_t ret;
+	loff_t pos;
 
 	file = fget_light(fd, &fput_needed);
 	if (!file)
 		return -EBADF;
-	ret = compat_readv(file, vec, vlen, &file->f_pos);
+	pos = file->f_pos;
+	ret = compat_readv(file, vec, vlen, &pos);
+	file->f_pos = pos;
 	fput_light(file, fput_needed);
 	return ret;
 }
@@ -1226,11 +1229,14 @@ compat_sys_writev(unsigned long fd, cons
 	struct file *file;
 	int fput_needed;
 	ssize_t ret;
+	loff_t pos;
 
 	file = fget_light(fd, &fput_needed);
 	if (!file)
 		return -EBADF;
-	ret = compat_writev(file, vec, vlen, &file->f_pos);
+	pos = file->f_pos;
+	ret = compat_writev(file, vec, vlen, &pos);
+	file->f_pos = pos;
 	fput_light(file, fput_needed);
 	return ret;
 }

[ 18/85] vfs: canonicalize create mode in build_open_flags()

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit e68726ff72cf7ba5e7d789857fcd9a75ca573f03 upstream.

Userspace can pass weird create mode in open(2) that we canonicalize to
"(mode & S_IALLUGO) | S_IFREG" in vfs_create().

The problem is that we use the uncanonicalized mode before calling vfs_create()
with unforseen consequences.

So do the canonicalization early in build_open_flags().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/open.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/open.c
+++ b/fs/open.c
@@ -882,9 +882,10 @@ static inline int build_open_flags(int f
 	int lookup_flags = 0;
 	int acc_mode;
 
-	if (!(flags & O_CREAT))
-		mode = 0;
-	op->mode = mode;
+	if (flags & O_CREAT)
+		op->mode = (mode & S_IALLUGO) | S_IFREG;
+	else
+		op->mode = 0;
 
 	/* Must never be set by userspace */
 	flags &= ~FMODE_NONOTIFY;

[ 19/85] alpha: fix fpu.h usage in userspace

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Frysinger <vapier@gentoo.org>

commit 0be421862b857e61964435ffcaa7499cf77a5e5a upstream.

After commit ec2212088c42 ("Disintegrate asm/system.h for Alpha"), the
fpu.h header which we install for userland started depending on
special_insns.h which is not installed.

However, fpu.h only uses that for __KERNEL__ code, so protect the
inclusion the same way to avoid build breakage in glibc:

  /usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory

Reported-by: Matt Turner <mattst88@gentoo.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/alpha/include/asm/fpu.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/alpha/include/asm/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
@@ -1,7 +1,9 @@
 #ifndef __ASM_ALPHA_FPU_H
 #define __ASM_ALPHA_FPU_H
 
+#ifdef __KERNEL__
 #include <asm/special_insns.h>
+#endif
 
 /*
  * Alpha floating-point control register defines:

[ 20/85] alpha: Dont export SOCK_NONBLOCK to user space.

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Cree <mcree@orcon.net.nz>

commit a2fa3ccd7b43665fe14cb562761a6c3d26a1d13f upstream.

Currently we export SOCK_NONBLOCK to user space but that conflicts with
the definition from glibc leading to compilation errors in user programs
(e.g.  see Debian bug #658460).

The generic socket.h restricts the definition of SOCK_NONBLOCK to the
kernel, as does the MIPS specific socket.h, so let's do the same on
Alpha.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/alpha/include/asm/socket.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -76,9 +76,11 @@
 /* Instruct lower device to use last 4-bytes of skb data as FCS */
 #define SO_NOFCS		43
 
+#ifdef __KERNEL__
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
 #define SOCK_NONBLOCK	0x40000000
+#endif /* __KERNEL__ */
 
 #endif /* _ASM_SOCKET_H */

[ 21/85] USB: winbond: remove __devinit* from the struct usb_device_id table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 43a34695d9cd79c6659f09da6d3b0624f3dd169f upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Pavel Machek <pavel@ucw.cz>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: "John W. Linville" <linville@tuxdriver.com>
CC: Eliad Peller <eliad@wizery.com>
CC: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/winbond/wbusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -25,7 +25,7 @@ MODULE_DESCRIPTION("IS89C35 802.11bg WLA
 MODULE_LICENSE("GPL");
 MODULE_VERSION("0.1");
 
-static const struct usb_device_id wb35_table[] __devinitconst = {
+static const struct usb_device_id wb35_table[] = {
 	{ USB_DEVICE(0x0416, 0x0035) },
 	{ USB_DEVICE(0x18E8, 0x6201) },
 	{ USB_DEVICE(0x18E8, 0x6206) },

[ 22/85] mm: hugetlbfs: correctly populate shared pmd

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Hocko <mhocko@suse.cz>

commit eb48c071464757414538c68a6033c8f8c15196f8 upstream.

Each page mapped in a process's address space must be correctly
accounted for in _mapcount.  Normally the rules for this are
straightforward but hugetlbfs page table sharing is different.  The page
table pages at the PMD level are reference counted while the mapcount
remains the same.

If this accounting is wrong, it causes bugs like this one reported by
Larry Woodman:

  kernel BUG at mm/filemap.c:135!
  invalid opcode: 0000 [#1] SMP
  CPU 22
  Modules linked in: bridge stp llc sunrpc binfmt_misc dcdbas microcode pcspkr acpi_pad acpi]
  Pid: 18001, comm: mpitest Tainted: G        W    3.3.0+ #4 Dell Inc. PowerEdge R620/07NDJ2
  RIP: 0010:[<ffffffff8112cfed>]  [<ffffffff8112cfed>] __delete_from_page_cache+0x15d/0x170
  Process mpitest (pid: 18001, threadinfo ffff880428972000, task ffff880428b5cc20)
  Call Trace:
    delete_from_page_cache+0x40/0x80
    truncate_hugepages+0x115/0x1f0
    hugetlbfs_evict_inode+0x18/0x30
    evict+0x9f/0x1b0
    iput_final+0xe3/0x1e0
    iput+0x3e/0x50
    d_kill+0xf8/0x110
    dput+0xe2/0x1b0
    __fput+0x162/0x240

During fork(), copy_hugetlb_page_range() detects if huge_pte_alloc()
shared page tables with the check dst_pte == src_pte.  The logic is if
the PMD page is the same, they must be shared.  This assumes that the
sharing is between the parent and child.  However, if the sharing is
with a different process entirely then this check fails as in this
diagram:

  parent
    |
    ------------>pmd
                 src_pte----------> data page
                                        ^
  other--------->pmd--------------------|
                  ^
  child-----------|
                 dst_pte

For this situation to occur, it must be possible for Parent and Other to
have faulted and failed to share page tables with each other.  This is
possible due to the following style of race.

  PROC A                                          PROC B
  copy_hugetlb_page_range                         copy_hugetlb_page_range
    src_pte == huge_pte_offset                      src_pte == huge_pte_offset
    !src_pte so no sharing                          !src_pte so no sharing

  (time passes)

  hugetlb_fault                                   hugetlb_fault
    huge_pte_alloc                                  huge_pte_alloc
      huge_pmd_share                                 huge_pmd_share
        LOCK(i_mmap_mutex)
        find nothing, no sharing
        UNLOCK(i_mmap_mutex)
                                                      LOCK(i_mmap_mutex)
                                                      find nothing, no sharing
                                                      UNLOCK(i_mmap_mutex)
      pmd_alloc                                       pmd_alloc
      LOCK(instantiation_mutex)
      fault
      UNLOCK(instantiation_mutex)
                                                  LOCK(instantiation_mutex)
                                                  fault
                                                  UNLOCK(instantiation_mutex)

These two processes are not poing to the same data page but are not
sharing page tables because the opportunity was missed.  When either
process later forks, the src_pte == dst pte is potentially insufficient.
As the check falls through, the wrong PTE information is copied in
(harmless but wrong) and the mapcount is bumped for a page mapped by a
shared page table leading to the BUG_ON.

This patch addresses the issue by moving pmd_alloc into huge_pmd_share
which guarantees that the shared pud is populated in the same critical
section as pmd.  This also means that huge_pte_offset test in
huge_pmd_share is serialized correctly now which in turn means that the
success of the sharing will be higher as the racing tasks see the pud
and pmd populated together.

Race identified and changelog written mostly by Mel Gorman.

{akpm@linux-foundation.org: attempt to make the huge_pmd_share() comment comprehensible, clean up coding style]
Reported-by: Larry Woodman <lwoodman@redhat.com>
Tested-by: Larry Woodman <lwoodman@redhat.com>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/hugetlbpage.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_
 }
 
 /*
- * search for a shareable pmd page for hugetlb.
+ * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc()
+ * and returns the corresponding pte. While this is not necessary for the
+ * !shared pmd case because we can allocate the pmd later as well, it makes the
+ * code much cleaner. pmd allocation is essential for the shared case because
+ * pud has to be populated inside the same i_mmap_mutex section - otherwise
+ * racing tasks could either miss the sharing (see huge_pte_offset) or select a
+ * bad pmd for sharing.
  */
-static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
+static pte_t *
+huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud)
 {
 	struct vm_area_struct *vma = find_vma(mm, addr);
 	struct address_space *mapping = vma->vm_file->f_mapping;
@@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_str
 	struct vm_area_struct *svma;
 	unsigned long saddr;
 	pte_t *spte = NULL;
+	pte_t *pte;
 
 	if (!vma_shareable(vma, addr))
-		return;
+		return (pte_t *)pmd_alloc(mm, pud, addr);
 
 	mutex_lock(&mapping->i_mmap_mutex);
 	vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) {
@@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_str
 		put_page(virt_to_page(spte));
 	spin_unlock(&mm->page_table_lock);
 out:
+	pte = (pte_t *)pmd_alloc(mm, pud, addr);
 	mutex_unlock(&mapping->i_mmap_mutex);
+	return pte;
 }
 
 /*
@@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *
 		} else {
 			BUG_ON(sz != PMD_SIZE);
 			if (pud_none(*pud))
-				huge_pmd_share(mm, addr, pud);
-			pte = (pte_t *) pmd_alloc(mm, pud, addr);
+				pte = huge_pmd_share(mm, addr, pud);
+			else
+				pte = (pte_t *)pmd_alloc(mm, pud, addr);
 		}
 	}
 	BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));

[ 23/85] ALSA: hda - dont create dysfunctional mixer controls for ca0132

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit c41999a23929f30808bae6009d8065052d4d73fd upstream.

It's possible that these amps are settable somehow, e g through
secret codec verbs, but for now, don't create the controls (as
they won't be working anyway, and cause errors in amixer).

BugLink: https://bugs.launchpad.net/bugs/1038651
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_ca0132.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -276,6 +276,10 @@ static int _add_switch(struct hda_codec
 	int type = dir ? HDA_INPUT : HDA_OUTPUT;
 	struct snd_kcontrol_new knew =
 		HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type);
+	if ((query_amp_caps(codec, nid, type) & AC_AMPCAP_MUTE) == 0) {
+		snd_printdd("Skipping '%s %s Switch' (no mute on node 0x%x)\n", pfx, dirstr[dir], nid);
+		return 0;
+	}
 	sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]);
 	return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
 }
@@ -287,6 +291,10 @@ static int _add_volume(struct hda_codec
 	int type = dir ? HDA_INPUT : HDA_OUTPUT;
 	struct snd_kcontrol_new knew =
 		HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type);
+	if ((query_amp_caps(codec, nid, type) & AC_AMPCAP_NUM_STEPS) == 0) {
+		snd_printdd("Skipping '%s %s Volume' (no amp on node 0x%x)\n", pfx, dirstr[dir], nid);
+		return 0;
+	}
 	sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]);
 	return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
 }

[ 24/85] target: fix NULL pointer dereference bug alloc_page() fails to get memory

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yi Zou <yi.zou@intel.com>

commit d0e27c88d795fb9647153063ec48051fd84e1731 upstream.

I am hitting this bug when the target is low in memory that fails the
alloc_page() for the newly submitted command. This is a sort of off-by-one
bug causing NULL pointer dereference in __free_page() since 'i' here is
really the counter of total pages that have been successfully allocated here.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Open-FCoE.org <devel@open-fcoe.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_transport.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3675,9 +3675,9 @@ transport_generic_get_mem(struct se_cmd
 	return 0;
 
 out:
-	while (i >= 0) {
-		__free_page(sg_page(&cmd->t_data_sg[i]));
+	while (i > 0) {
 		i--;
+		__free_page(sg_page(&cmd->t_data_sg[i]));
 	}
 	kfree(cmd->t_data_sg);
 	cmd->t_data_sg = NULL;

[ 25/85] NFSv3: Ensure that do_proc_get_root() reports errors correctly

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 086600430493e04b802bee6e5b3ce0458e4eb77f upstream.

If the rpc call to NFS3PROC_FSINFO fails, then we need to report that
error so that the mount fails. Otherwise we can end up with a
superblock with completely unusable values for block sizes, maxfilesize,
etc.

Reported-by: Yuanming Chen <hikvision_linux@163.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs3proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -69,7 +69,7 @@ do_proc_get_root(struct rpc_clnt *client
 	nfs_fattr_init(info->fattr);
 	status = rpc_call_sync(client, &msg, 0);
 	dprintk("%s: reply fsinfo: %d\n", __func__, status);
-	if (!(info->fattr->valid & NFS_ATTR_FATTR)) {
+	if (status == 0 && !(info->fattr->valid & NFS_ATTR_FATTR)) {
 		msg.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR];
 		msg.rpc_resp = info->fattr;
 		status = rpc_call_sync(client, &msg, 0);

[ 26/85] pnfs: defer release of pages in layoutget

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Idan Kedar <idank@tonian.com>

commit 8554116e17eef055d9dd58a94b3427cb2ad1c317 upstream.

we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.

hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.

Signed-off-by: Idan Kedar <idank@tonian.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |   57 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
 fs/nfs/pnfs.c     |   39 ------------------------------------
 fs/nfs/pnfs.h     |    2 -
 3 files changed, 58 insertions(+), 40 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5966,11 +5966,58 @@ static void nfs4_layoutget_done(struct r
 	dprintk("<-- %s\n", __func__);
 }
 
+static size_t max_response_pages(struct nfs_server *server)
+{
+	u32 max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
+	return nfs_page_array_len(0, max_resp_sz);
+}
+
+static void nfs4_free_pages(struct page **pages, size_t size)
+{
+	int i;
+
+	if (!pages)
+		return;
+
+	for (i = 0; i < size; i++) {
+		if (!pages[i])
+			break;
+		__free_page(pages[i]);
+	}
+	kfree(pages);
+}
+
+static struct page **nfs4_alloc_pages(size_t size, gfp_t gfp_flags)
+{
+	struct page **pages;
+	int i;
+
+	pages = kcalloc(size, sizeof(struct page *), gfp_flags);
+	if (!pages) {
+		dprintk("%s: can't alloc array of %zu pages\n", __func__, size);
+		return NULL;
+	}
+
+	for (i = 0; i < size; i++) {
+		pages[i] = alloc_page(gfp_flags);
+		if (!pages[i]) {
+			dprintk("%s: failed to allocate page\n", __func__);
+			nfs4_free_pages(pages, size);
+			return NULL;
+		}
+	}
+
+	return pages;
+}
+
 static void nfs4_layoutget_release(void *calldata)
 {
 	struct nfs4_layoutget *lgp = calldata;
+	struct nfs_server *server = NFS_SERVER(lgp->args.inode);
+	size_t max_pages = max_response_pages(server);
 
 	dprintk("--> %s\n", __func__);
+	nfs4_free_pages(lgp->args.layout.pages, max_pages);
 	put_nfs_open_context(lgp->args.ctx);
 	kfree(calldata);
 	dprintk("<-- %s\n", __func__);
@@ -5982,9 +6029,10 @@ static const struct rpc_call_ops nfs4_la
 	.rpc_release = nfs4_layoutget_release,
 };
 
-int nfs4_proc_layoutget(struct nfs4_layoutget *lgp)
+int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags)
 {
 	struct nfs_server *server = NFS_SERVER(lgp->args.inode);
+	size_t max_pages = max_response_pages(server);
 	struct rpc_task *task;
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LAYOUTGET],
@@ -6002,6 +6050,13 @@ int nfs4_proc_layoutget(struct nfs4_layo
 
 	dprintk("--> %s\n", __func__);
 
+	lgp->args.layout.pages = nfs4_alloc_pages(max_pages, gfp_flags);
+	if (!lgp->args.layout.pages) {
+		nfs4_layoutget_release(lgp);
+		return -ENOMEM;
+	}
+	lgp->args.layout.pglen = max_pages * PAGE_SIZE;
+
 	lgp->res.layoutp = &lgp->args.layout;
 	lgp->res.seq_res.sr_slot = NULL;
 	nfs41_init_sequence(&lgp->args.seq_args, &lgp->res.seq_res, 0);
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -574,9 +574,6 @@ send_layoutget(struct pnfs_layout_hdr *l
 	struct nfs_server *server = NFS_SERVER(ino);
 	struct nfs4_layoutget *lgp;
 	struct pnfs_layout_segment *lseg = NULL;
-	struct page **pages = NULL;
-	int i;
-	u32 max_resp_sz, max_pages;
 
 	dprintk("--> %s\n", __func__);
 
@@ -585,20 +582,6 @@ send_layoutget(struct pnfs_layout_hdr *l
 	if (lgp == NULL)
 		return NULL;
 
-	/* allocate pages for xdr post processing */
-	max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz;
-	max_pages = nfs_page_array_len(0, max_resp_sz);
-
-	pages = kcalloc(max_pages, sizeof(struct page *), gfp_flags);
-	if (!pages)
-		goto out_err_free;
-
-	for (i = 0; i < max_pages; i++) {
-		pages[i] = alloc_page(gfp_flags);
-		if (!pages[i])
-			goto out_err_free;
-	}
-
 	lgp->args.minlength = PAGE_CACHE_SIZE;
 	if (lgp->args.minlength > range->length)
 		lgp->args.minlength = range->length;
@@ -607,39 +590,19 @@ send_layoutget(struct pnfs_layout_hdr *l
 	lgp->args.type = server->pnfs_curr_ld->id;
 	lgp->args.inode = ino;
 	lgp->args.ctx = get_nfs_open_context(ctx);
-	lgp->args.layout.pages = pages;
-	lgp->args.layout.pglen = max_pages * PAGE_SIZE;
 	lgp->lsegpp = &lseg;
 	lgp->gfp_flags = gfp_flags;
 
 	/* Synchronously retrieve layout information from server and
 	 * store in lseg.
 	 */
-	nfs4_proc_layoutget(lgp);
+	nfs4_proc_layoutget(lgp, gfp_flags);
 	if (!lseg) {
 		/* remember that LAYOUTGET failed and suspend trying */
 		set_bit(lo_fail_bit(range->iomode), &lo->plh_flags);
 	}
 
-	/* free xdr pages */
-	for (i = 0; i < max_pages; i++)
-		__free_page(pages[i]);
-	kfree(pages);
-
 	return lseg;
-
-out_err_free:
-	/* free any allocated xdr pages, lgp as it's not used */
-	if (pages) {
-		for (i = 0; i < max_pages; i++) {
-			if (!pages[i])
-				break;
-			__free_page(pages[i]);
-		}
-		kfree(pages);
-	}
-	kfree(lgp);
-	return NULL;
 }
 
 /* Initiates a LAYOUTRETURN(FILE) */
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -161,7 +161,7 @@ extern int nfs4_proc_getdevicelist(struc
 				   struct pnfs_devicelist *devlist);
 extern int nfs4_proc_getdeviceinfo(struct nfs_server *server,
 				   struct pnfs_device *dev);
-extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp);
+extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags);
 extern int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp);
 
 /* pnfs.c */

[ 27/85] NFSv4.1: Remove a bogus BUG_ON() in nfs4_layoutreturn_done

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 47fbf7976e0b7d9dcdd799e2a1baba19064d9631 upstream.

Ever since commit 0a57cdac3f (NFSv4.1 send layoutreturn to fence
disconnected data server) we've been sending layoutreturn calls
while there is potentially still outstanding I/O to the data
servers. The reason we do this is to avoid races between replayed
writes to the MDS and the original writes to the DS.

When this happens, the BUG_ON() in nfs4_layoutreturn_done can
be triggered because it assumes that we would never call
layoutreturn without knowing that all I/O to the DS is
finished. The fix is to remove the BUG_ON() now that the
assumptions behind the test are obsolete.

Reported-by: Boaz Harrosh <bharrosh@panasas.com>
Reported-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -6102,12 +6102,8 @@ static void nfs4_layoutreturn_done(struc
 		return;
 	}
 	spin_lock(&lo->plh_inode->i_lock);
-	if (task->tk_status == 0) {
-		if (lrp->res.lrs_present) {
-			pnfs_set_layout_stateid(lo, &lrp->res.stateid, true);
-		} else
-			BUG_ON(!list_empty(&lo->plh_segs));
-	}
+	if (task->tk_status == 0 && lrp->res.lrs_present)
+		pnfs_set_layout_stateid(lo, &lrp->res.stateid, true);
 	lo->plh_block_lgets--;
 	spin_unlock(&lo->plh_inode->i_lock);
 	dprintk("<-- %s\n", __func__);

[ 28/85] NFS: Clear key construction data if the idmap upcall fails

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bryan Schumaker <bjschuma@netapp.com>

commit c5066945b7ea346a11424dbeb7830b7d7d00c206 upstream.

idmap_pipe_downcall already clears this field if the upcall succeeds,
but if it fails (rpc.idmapd isn't running) the field will still be set
on the next call triggering a BUG_ON().  This patch tries to handle all
possible ways that the upcall could fail and clear the idmap key data
for each one.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Tested-by: William Dauchy <wdauchy@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/idmap.c |   56 ++++++++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 42 insertions(+), 14 deletions(-)

--- a/fs/nfs/idmap.c
+++ b/fs/nfs/idmap.c
@@ -63,6 +63,12 @@ struct idmap {
 	struct mutex		idmap_mutex;
 };
 
+struct idmap_legacy_upcalldata {
+	struct rpc_pipe_msg pipe_msg;
+	struct idmap_msg idmap_msg;
+	struct idmap *idmap;
+};
+
 /**
  * nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields
  * @fattr: fully initialised struct nfs_fattr
@@ -326,6 +332,7 @@ static ssize_t nfs_idmap_get_key(const c
 		ret = nfs_idmap_request_key(&key_type_id_resolver_legacy,
 					    name, namelen, type, data,
 					    data_size, idmap);
+		idmap->idmap_key_cons = NULL;
 		mutex_unlock(&idmap->idmap_mutex);
 	}
 	return ret;
@@ -383,11 +390,13 @@ static const match_table_t nfs_idmap_tok
 static int nfs_idmap_legacy_upcall(struct key_construction *, const char *, void *);
 static ssize_t idmap_pipe_downcall(struct file *, const char __user *,
 				   size_t);
+static void idmap_release_pipe(struct inode *);
 static void idmap_pipe_destroy_msg(struct rpc_pipe_msg *);
 
 static const struct rpc_pipe_ops idmap_upcall_ops = {
 	.upcall		= rpc_pipe_generic_upcall,
 	.downcall	= idmap_pipe_downcall,
+	.release_pipe	= idmap_release_pipe,
 	.destroy_msg	= idmap_pipe_destroy_msg,
 };
 
@@ -603,7 +612,8 @@ void nfs_idmap_quit(void)
 	nfs_idmap_quit_keyring();
 }
 
-static int nfs_idmap_prepare_message(char *desc, struct idmap_msg *im,
+static int nfs_idmap_prepare_message(char *desc, struct idmap *idmap,
+				     struct idmap_msg *im,
 				     struct rpc_pipe_msg *msg)
 {
 	substring_t substr;
@@ -646,6 +656,7 @@ static int nfs_idmap_legacy_upcall(struc
 				   const char *op,
 				   void *aux)
 {
+	struct idmap_legacy_upcalldata *data;
 	struct rpc_pipe_msg *msg;
 	struct idmap_msg *im;
 	struct idmap *idmap = (struct idmap *)aux;
@@ -653,15 +664,15 @@ static int nfs_idmap_legacy_upcall(struc
 	int ret = -ENOMEM;
 
 	/* msg and im are freed in idmap_pipe_destroy_msg */
-	msg = kmalloc(sizeof(*msg), GFP_KERNEL);
-	if (!msg)
-		goto out0;
-
-	im = kmalloc(sizeof(*im), GFP_KERNEL);
-	if (!im)
+	data = kmalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
 		goto out1;
 
-	ret = nfs_idmap_prepare_message(key->description, im, msg);
+	msg = &data->pipe_msg;
+	im = &data->idmap_msg;
+	data->idmap = idmap;
+
+	ret = nfs_idmap_prepare_message(key->description, idmap, im, msg);
 	if (ret < 0)
 		goto out2;
 
@@ -670,15 +681,15 @@ static int nfs_idmap_legacy_upcall(struc
 
 	ret = rpc_queue_upcall(idmap->idmap_pipe, msg);
 	if (ret < 0)
-		goto out2;
+		goto out3;
 
 	return ret;
 
+out3:
+	idmap->idmap_key_cons = NULL;
 out2:
-	kfree(im);
+	kfree(data);
 out1:
-	kfree(msg);
-out0:
 	complete_request_key(cons, ret);
 	return ret;
 }
@@ -762,9 +773,26 @@ out_incomplete:
 static void
 idmap_pipe_destroy_msg(struct rpc_pipe_msg *msg)
 {
+	struct idmap_legacy_upcalldata *data = container_of(msg,
+			struct idmap_legacy_upcalldata,
+			pipe_msg);
+	struct idmap *idmap = data->idmap;
+	struct key_construction *cons;
+	if (msg->errno) {
+		cons = ACCESS_ONCE(idmap->idmap_key_cons);
+		idmap->idmap_key_cons = NULL;
+		complete_request_key(cons, msg->errno);
+	}
 	/* Free memory allocated in nfs_idmap_legacy_upcall() */
-	kfree(msg->data);
-	kfree(msg);
+	kfree(data);
+}
+
+static void
+idmap_release_pipe(struct inode *inode)
+{
+	struct rpc_inode *rpci = RPC_I(inode);
+	struct idmap *idmap = (struct idmap *)rpci->private;
+	idmap->idmap_key_cons = NULL;
 }
 
 int nfs_map_name_to_uid(const struct nfs_server *server, const char *name, size_t namelen, __u32 *uid)

[ 29/85] NFS: return -ENOKEY when the upcall fails to map the name

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bryan Schumaker <bjschuma@netapp.com>

commit 12dfd080556124088ed61a292184947711b46cbe upstream.

This allows the normal error-paths to handle the error, rather than
making a special call to complete_request_key() just for this instance.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Tested-by: William Dauchy <wdauchy@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/idmap.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/nfs/idmap.c
+++ b/fs/nfs/idmap.c
@@ -747,9 +747,8 @@ idmap_pipe_downcall(struct file *filp, c
 	}
 
 	if (!(im.im_status & IDMAP_STATUS_SUCCESS)) {
-		ret = mlen;
-		complete_request_key(cons, -ENOKEY);
-		goto out_incomplete;
+		ret = -ENOKEY;
+		goto out;
 	}
 
 	namelen_in = strnlen(im.im_name, IDMAP_NAMESZ);
@@ -766,7 +765,6 @@ idmap_pipe_downcall(struct file *filp, c
 
 out:
 	complete_request_key(cons, ret);
-out_incomplete:
 	return ret;
 }
 

[ 30/85] UBIFS: fix complaints about too small debug buffer size

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

commit 65b455b123c7e2b835a0b7148f9bae584f95000e upstream.

When debugging is enabled, we use a temporary on-stack buffer for formatting
the key strings like "(11368871, direntry, 0xcd0750)". The buffer size is
32 bytes and sometimes it is not enough to fit the key string - e.g., when
inode numbers are high. This is not fatal, but the key strings are incomplete
and UBIFS complains like this:

	UBIFS assert failed in dbg_snprintf_key at 137 (pid 1)

This is a regression caused by "515315a UBIFS: fix key printing".

Fix the issue by increasing the buffer to 48 bytes.

Reported-by: Michael Hench <michaelhench@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Michael Hench <michaelhench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/debug.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ubifs/debug.h
+++ b/fs/ubifs/debug.h
@@ -170,7 +170,7 @@ struct ubifs_global_debug_info {
 #define ubifs_dbg_msg(type, fmt, ...) \
 	pr_debug("UBIFS DBG " type ": " fmt "\n", ##__VA_ARGS__)
 
-#define DBG_KEY_BUF_LEN 32
+#define DBG_KEY_BUF_LEN 48
 #define ubifs_dbg_msg_key(type, key, fmt, ...) do {                            \
 	char __tmp_key_buf[DBG_KEY_BUF_LEN];                                   \
 	pr_debug("UBIFS DBG " type ": " fmt "%s\n", ##__VA_ARGS__,             \

[ 31/85] Bluetooth: Fix using NULL inquiry entry

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ram Malovany <ramm@ti.com>

commit c810089c27e48b816181b454fcc493d19fdbc2ba upstream.

If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not
resolve the name.This will fix a kernel crash when trying to use NULL
pointer.

Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/hci_event.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1357,6 +1357,9 @@ static bool hci_resolve_next_name(struct
 		return false;
 
 	e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED);
+	if (!e)
+		return false;
+
 	if (hci_resolve_name(hdev, e) == 0) {
 		e->name_state = NAME_PENDING;
 		return true;

[ 32/85] Bluetooth: Fix using a NULL inquiry cache entry

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ram Malovany <ramm@ti.com>

commit 7cc8380eb10347016d95bf6f9d842c2ae6d12932 upstream.

If the device was not found in a list of found devices names of which
are pending.This may happen in a case when HCI Remote Name Request
was sent as a part of incoming connection establishment procedure.
Hence there is no need to continue resolving a next name as it will
be done upon receiving another Remote Name Request Complete Event.
This will fix a kernel crash when trying to use this entry to resolve
the next name.

Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/hci_event.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1388,12 +1388,18 @@ static void hci_check_pending_name(struc
 		return;
 
 	e = hci_inquiry_cache_lookup_resolve(hdev, bdaddr, NAME_PENDING);
-	if (e) {
+	/* If the device was not found in a list of found devices names of which
+	 * are pending. there is no need to continue resolving a next name as it
+	 * will be done upon receiving another Remote Name Request Complete
+	 * Event */
+	if (!e)
+		return;
+
+	list_del(&e->list);
+	if (name) {
 		e->name_state = NAME_KNOWN;
-		list_del(&e->list);
-		if (name)
-			mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00,
-					 e->data.rssi, name, name_len);
+		mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00,
+				 e->data.rssi, name, name_len);
 	}
 
 	if (hci_resolve_next_name(hdev))

[ 33/85] Bluetooth: Set name_state to unknown when entry name is empty

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ram Malovany <ramm@ti.com>

commit c3e7c0d90b14a3e7ac091d24cef09efb516d587b upstream.

When the name of the given entry is empty , the state needs to be
updated accordingly.

Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/hci_event.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1400,6 +1400,8 @@ static void hci_check_pending_name(struc
 		e->name_state = NAME_KNOWN;
 		mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00,
 				 e->data.rssi, name, name_len);
+	} else {
+		e->name_state = NAME_NOT_KNOWN;
 	}
 
 	if (hci_resolve_next_name(hdev))

[ 34/85] Bluetooth: Fix legacy pairing with some devices

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Szymon Janc <szymon.janc@tieto.com>

commit a9ea3ed9b71cc3271dd59e76f65748adcaa76422 upstream.

Some devices e.g. some Android based phones don't do SDP search before
pairing and cancel legacy pairing when ACL is disconnected.

PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT
is only received after remote user entered PIN.

In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT
(2 seconds) is being used to timeout ACL connection. This results in
problems with legacy pairing as remote user has only few seconds to
enter PIN before ACL is disconnected.

Increase disconnect timeout for incomming connection to
HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists.

To avoid keeping ACL alive for too long after SDP search set ACL
timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected.

2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8
    status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01
    Role: Slave
2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00
2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 42
2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:02:72:D6:6A:3F mode 0
2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3
    handle 42 slots 5
2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 42
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 42 page 1
2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 42 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000
2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0'
2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2
    handle 42
2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3
    status 0x13 handle 42
    Error: Remote User Terminated Connection
2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 42 reason 0x13
    Reason: Remote User Terminated Connection

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/hci_event.c  |    7 ++++++-
 net/bluetooth/l2cap_core.c |    1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1760,7 +1760,12 @@ static inline void hci_conn_complete_evt
 		if (conn->type == ACL_LINK) {
 			conn->state = BT_CONFIG;
 			hci_conn_hold(conn);
-			conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+
+			if (!conn->out && !hci_conn_ssp_enabled(conn) &&
+			    !hci_find_link_key(hdev, &ev->bdaddr))
+				conn->disc_timeout = HCI_PAIRING_TIMEOUT;
+			else
+				conn->disc_timeout = HCI_DISCONN_TIMEOUT;
 		} else
 			conn->state = BT_CONNECTED;
 
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -893,6 +893,7 @@ static void l2cap_le_conn_ready(struct l
 	sk = chan->sk;
 
 	hci_conn_hold(conn->hcon);
+	conn->hcon->disc_timeout = HCI_DISCONN_TIMEOUT;
 
 	bacpy(&bt_sk(sk)->src, conn->src);
 	bacpy(&bt_sk(sk)->dst, conn->dst);

[ 35/85] NFS: Alias the nfs module to nfs4

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

commit 425e776d93a7a5070b77d4f458a5bab0f924652c upstream.

This allows distros to remove the line from their modprobe
configuration.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/super.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -3146,4 +3146,6 @@ static struct dentry *nfs4_referral_moun
 	return res;
 }
 
+MODULE_ALIAS("nfs4");
+
 #endif /* CONFIG_NFS_V4 */

[ 36/85] audit: dont free_chunk() after fsnotify_add_mark()

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit 0fe33aae0e94b4097dd433c9399e16e17d638cd8 upstream.

Don't do free_chunk() after fsnotify_add_mark().  That one does a delayed unref
via the destroy list and this results in use-after-free.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/audit_tree.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -259,7 +259,7 @@ static void untag_chunk(struct node *p)
 
 	fsnotify_duplicate_mark(&new->mark, entry);
 	if (fsnotify_add_mark(&new->mark, new->mark.group, new->mark.i.inode, NULL, 1)) {
-		free_chunk(new);
+		fsnotify_put_mark(&new->mark);
 		goto Fallback;
 	}
 
@@ -322,7 +322,7 @@ static int create_chunk(struct inode *in
 
 	entry = &chunk->mark;
 	if (fsnotify_add_mark(entry, audit_tree_group, inode, NULL, 0)) {
-		free_chunk(chunk);
+		fsnotify_put_mark(entry);
 		return -ENOSPC;
 	}
 
@@ -396,7 +396,7 @@ static int tag_chunk(struct inode *inode
 	fsnotify_duplicate_mark(chunk_entry, old_entry);
 	if (fsnotify_add_mark(chunk_entry, chunk_entry->group, chunk_entry->i.inode, NULL, 1)) {
 		spin_unlock(&old_entry->lock);
-		free_chunk(chunk);
+		fsnotify_put_mark(chunk_entry);
 		fsnotify_put_mark(old_entry);
 		return -ENOSPC;
 	}

[ 37/85] audit: fix refcounting in audit-tree

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit a2140fc0cb0325bb6384e788edd27b9a568714e2 upstream.

Refcounting of fsnotify_mark in audit tree is broken.  E.g:

                              refcount
create_chunk
  alloc_chunk                 1
  fsnotify_add_mark           2

untag_chunk
  fsnotify_get_mark           3
  fsnotify_destroy_mark
    audit_tree_freeing_mark   2
  fsnotify_put_mark           1
  fsnotify_put_mark           0
  via destroy_list
    fsnotify_mark_destroy    -1

This was reported by various people as triggering Oops when stopping auditd.

We could just remove the put_mark from audit_tree_freeing_mark() but that would
break freeing via inode destruction.  So this patch simply omits a put_mark
after calling destroy_mark or adds a get_mark before.

The additional get_mark is necessary where there's no other put_mark after
fsnotify_destroy_mark() since it assumes that the caller is holding a reference
(or the inode is keeping the mark pinned, not the case here AFAICS).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Valentin Avram <aval13@gmail.com>
Reported-by: Peter Moody <pmoody@google.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/audit_tree.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -250,7 +250,6 @@ static void untag_chunk(struct node *p)
 		spin_unlock(&hash_lock);
 		spin_unlock(&entry->lock);
 		fsnotify_destroy_mark(entry);
-		fsnotify_put_mark(entry);
 		goto out;
 	}
 
@@ -293,7 +292,6 @@ static void untag_chunk(struct node *p)
 	spin_unlock(&hash_lock);
 	spin_unlock(&entry->lock);
 	fsnotify_destroy_mark(entry);
-	fsnotify_put_mark(entry);
 	goto out;
 
 Fallback:
@@ -332,6 +330,7 @@ static int create_chunk(struct inode *in
 		spin_unlock(&hash_lock);
 		chunk->dead = 1;
 		spin_unlock(&entry->lock);
+		fsnotify_get_mark(entry);
 		fsnotify_destroy_mark(entry);
 		fsnotify_put_mark(entry);
 		return 0;
@@ -412,6 +411,7 @@ static int tag_chunk(struct inode *inode
 		spin_unlock(&chunk_entry->lock);
 		spin_unlock(&old_entry->lock);
 
+		fsnotify_get_mark(chunk_entry);
 		fsnotify_destroy_mark(chunk_entry);
 
 		fsnotify_put_mark(chunk_entry);
@@ -445,7 +445,6 @@ static int tag_chunk(struct inode *inode
 	spin_unlock(&old_entry->lock);
 	fsnotify_destroy_mark(old_entry);
 	fsnotify_put_mark(old_entry); /* pair to fsnotify_find mark_entry */
-	fsnotify_put_mark(old_entry); /* and kill it */
 	return 0;
 }
 

[ 38/85] drm: stop vmgfx driver explosion

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Cox <alan@linux.intel.com>

commit f5869a8308f77e3dfdc2e3640842b285aa788ff8 upstream.

If you do a page flip with no flags set then event is NULL. If event is
NULL then the vmw_gfx driver likes to go digging into NULL and extracts
NULL->base.file_priv.

On a modern kernel with NULL mapping protection it's just another oops,
without it there are some "intriguing" possibilities.

What it should do is an open question but that for the driver owners to
sort out.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -1688,15 +1688,19 @@ int vmw_du_page_flip(struct drm_crtc *cr
 	struct vmw_private *dev_priv = vmw_priv(crtc->dev);
 	struct drm_framebuffer *old_fb = crtc->fb;
 	struct vmw_framebuffer *vfb = vmw_framebuffer_to_vfb(fb);
-	struct drm_file *file_priv = event->base.file_priv;
+	struct drm_file *file_priv ;
 	struct vmw_fence_obj *fence = NULL;
 	struct drm_clip_rect clips;
 	int ret;
 
+	if (event == NULL)
+		return -EINVAL;
+
 	/* require ScreenObject support for page flipping */
 	if (!dev_priv->sou_priv)
 		return -ENOSYS;
 
+	file_priv = event->base.file_priv;
 	if (!vmw_kms_screen_object_flippable(dev_priv, crtc))
 		return -EINVAL;
 

[ 39/85] Revert "drm/radeon: fix bo creation retry path"

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 676bc2e1e4f9072f7a640d5b7c99ffdf9709a6e7 upstream.

This reverts commit d1c7871ddb1f588b8eb35affd9ee1a3d5e11cd0c.

ttm_bo_init() destroys the BO on failure. So this patch makes
the retry path work with freed memory.  This ends up causing
kernel panics when this path is hit.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_object.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -136,6 +136,7 @@ int radeon_bo_create(struct radeon_devic
 	acc_size = ttm_bo_dma_acc_size(&rdev->mman.bdev, size,
 				       sizeof(struct radeon_bo));
 
+retry:
 	bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
 	if (bo == NULL)
 		return -ENOMEM;
@@ -149,8 +150,6 @@ int radeon_bo_create(struct radeon_devic
 	bo->surface_reg = -1;
 	INIT_LIST_HEAD(&bo->list);
 	INIT_LIST_HEAD(&bo->va);
-
-retry:
 	radeon_ttm_placement_from_domain(bo, domain);
 	/* Kernel allocation are uninterruptible */
 	mutex_lock(&rdev->vram_mutex);

[ 40/85] svcrpc: fix BUG() in svc_tcp_clear_pages

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit be1e44441a560c43c136a562d49a1c9623c91197 upstream.

Examination of svc_tcp_clear_pages shows that it assumes sk_tcplen is
consistent with sk_pages[] (in particular, sk_pages[n] can't be NULL if
sk_tcplen would lead us to expect n pages of data).

svc_tcp_restore_pages zeroes out sk_pages[] while leaving sk_tcplen.
This is OK, since both functions are serialized by XPT_BUSY.  However,
that means the inconsistency must be repaired before dropping XPT_BUSY.

Therefore we should be ensuring that svc_tcp_save_pages repairs the
problem before exiting svc_tcp_recv_record on error.

Symptoms were a BUG() in svc_tcp_clear_pages.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/svcsock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1137,9 +1137,9 @@ static int svc_tcp_recvfrom(struct svc_r
 	if (len >= 0)
 		svsk->sk_tcplen += len;
 	if (len != want) {
+		svc_tcp_save_pages(svsk, rqstp);
 		if (len < 0 && len != -EAGAIN)
 			goto err_other;
-		svc_tcp_save_pages(svsk, rqstp);
 		dprintk("svc: incomplete TCP record (%d of %d)\n",
 			svsk->sk_tcplen, svsk->sk_reclen);
 		goto err_noclose;

[ 41/85] svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit d10f27a750312ed5638c876e4bd6aa83664cccd8 upstream.

The rpc server tries to ensure that there will be room to send a reply
before it receives a request.

It does this by tracking, in xpt_reserved, an upper bound on the total
size of the replies that is has already committed to for the socket.

Currently it is adding in the estimate for a new reply *before* it
checks whether there is space available.  If it finds that there is not
space, it then subtracts the estimate back out.

This may lead the subsequent svc_xprt_enqueue to decide that there is
space after all.

The results is a svc_recv() that will repeatedly return -EAGAIN, causing
server threads to loop without doing any actual work.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/svc_xprt.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -316,7 +316,6 @@ static bool svc_xprt_has_something_to_do
  */
 void svc_xprt_enqueue(struct svc_xprt *xprt)
 {
-	struct svc_serv	*serv = xprt->xpt_server;
 	struct svc_pool *pool;
 	struct svc_rqst	*rqstp;
 	int cpu;
@@ -362,8 +361,6 @@ void svc_xprt_enqueue(struct svc_xprt *x
 				rqstp, rqstp->rq_xprt);
 		rqstp->rq_xprt = xprt;
 		svc_xprt_get(xprt);
-		rqstp->rq_reserved = serv->sv_max_mesg;
-		atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
 		pool->sp_stats.threads_woken++;
 		wake_up(&rqstp->rq_wait);
 	} else {
@@ -643,8 +640,6 @@ int svc_recv(struct svc_rqst *rqstp, lon
 	if (xprt) {
 		rqstp->rq_xprt = xprt;
 		svc_xprt_get(xprt);
-		rqstp->rq_reserved = serv->sv_max_mesg;
-		atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
 
 		/* As there is a shortage of threads and this request
 		 * had to be queued, don't allow the thread to wait so
@@ -741,6 +736,8 @@ int svc_recv(struct svc_rqst *rqstp, lon
 		else
 			len = xprt->xpt_ops->xpo_recvfrom(rqstp);
 		dprintk("svc: got len=%d\n", len);
+		rqstp->rq_reserved = serv->sv_max_mesg;
+		atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
 	}
 	svc_xprt_received(xprt);
 

[ 42/85] svcrpc: sends on closed socket should stop immediately

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit f06f00a24d76e168ecb38d352126fd203937b601 upstream.

svc_tcp_sendto sets XPT_CLOSE if we fail to transmit the entire reply.
However, the XPT_CLOSE won't be acted on immediately.  Meanwhile other
threads could send further replies before the socket is really shut
down.  This can manifest as data corruption: for example, if a truncated
read reply is followed by another rpc reply, that second reply will look
to the client like further read data.

Symptoms were data corruption preceded by svc_tcp_sendto logging
something like

	kernel: rpc-srv/tcp: nfsd: sent only 963696 when sending 1048708 bytes - shutting down socket

Reported-by: Malahal Naineni <malahal@us.ibm.com>
Tested-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/svc_xprt.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -794,7 +794,8 @@ int svc_send(struct svc_rqst *rqstp)
 
 	/* Grab mutex to serialize outgoing data. */
 	mutex_lock(&xprt->xpt_mutex);
-	if (test_bit(XPT_DEAD, &xprt->xpt_flags))
+	if (test_bit(XPT_DEAD, &xprt->xpt_flags)
+			|| test_bit(XPT_CLOSE, &xprt->xpt_flags))
 		len = -ENOTCONN;
 	else
 		len = xprt->xpt_ops->xpo_sendto(rqstp);

[ 43/85] cciss: fix incorrect scsi status reporting

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>

commit b0cf0b118c90477d1a6811f2cd2307f6a5578362 upstream.

Delete code which sets SCSI status incorrectly as it's already been set
correctly above this incorrect code.  The bug was introduced in 2009 by
commit b0e15f6db111 ("cciss: fix typo that causes scsi status to be
lost.")

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-by: Roel van Meer <roel.vanmeer@bokxing.nl>
Tested-by: Roel van Meer <roel.vanmeer@bokxing.nl>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/cciss_scsi.c |   11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -763,16 +763,7 @@ static void complete_scsi_command(Comman
 		{
 			case CMD_TARGET_STATUS:
 				/* Pass it up to the upper layers... */
-				if( ei->ScsiStatus)
-                		{
-#if 0
-                    			printk(KERN_WARNING "cciss: cmd %p "
-						"has SCSI Status = %x\n",
-						c, ei->ScsiStatus);
-#endif
-					cmd->result |= (ei->ScsiStatus << 1);
-                		}
-				else {  /* scsi status is zero??? How??? */
+				if (!ei->ScsiStatus) {
 					
 	/* Ordinarily, this case should never happen, but there is a bug
 	   in some released firmware revisions that allows it to happen

[ 44/85] ACPI: export symbol acpi_get_table_with_size

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 4f81f986761a7663db7d24d24cd6ae68008f1fc2 upstream.

We need it in the radeon drm module to fetch
and verify the vbios image on UEFI systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/acpica/tbxface.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -436,6 +436,7 @@ acpi_get_table_with_size(char *signature
 
 	return (AE_NOT_FOUND);
 }
+ACPI_EXPORT_SYMBOL(acpi_get_table_with_size)
 
 acpi_status
 acpi_get_table(char *signature,

[ 45/85] ath9k: fix decrypt_error initialization in ath_rx_tasklet()

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>

commit e1352fde5682ab1bdd2a9e5d75c22d1fe210ef77 upstream.

ath_rx_tasklet() calls ath9k_rx_skb_preprocess() and ath9k_rx_skb_postprocess()
in a loop over the received frames. The decrypt_error flag is
initialized to false
just outside ath_rx_tasklet() loop. ath9k_rx_accept(), called by
ath9k_rx_skb_preprocess(),
only sets decrypt_error to true and never to false.
Then ath_rx_tasklet() calls ath9k_rx_skb_postprocess() and passes
decrypt_error to it.
So, after a decryption error, in ath9k_rx_skb_postprocess(), we can
have a leftover value
from another processed frame. In that case, the frame will not be marked with
RX_FLAG_DECRYPTED even if it is decrypted correctly.
When using CCMP encryption this issue can lead to connection stuck
because of CCMP
PN corruption and a waste of CPU time since mac80211 tries to decrypt an already
deciphered frame with ieee80211_aes_ccm_decrypt.
Fix the issue initializing decrypt_error flag at the begging of the
ath_rx_tasklet() loop.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/recv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1774,7 +1774,6 @@ int ath_rx_tasklet(struct ath_softc *sc,
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_hdr *hdr;
 	int retval;
-	bool decrypt_error = false;
 	struct ath_rx_status rs;
 	enum ath9k_rx_qtype qtype;
 	bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
@@ -1796,6 +1795,7 @@ int ath_rx_tasklet(struct ath_softc *sc,
 	tsf_lower = tsf & 0xffffffff;
 
 	do {
+		bool decrypt_error = false;
 		/* If handling rx interrupt and flush is in progress => exit */
 		if ((sc->sc_flags & SC_OP_RXFLUSH) && (flush == 0))
 			break;

[ 46/85] PCI: EHCI: Fix crash during hibernation on ASUS computers

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rjw@sisk.pl>

commit 0b68c8e2c3afaf9807eb1ebe0ccfb3b809570aa4 upstream.

Commit dbf0e4c (PCI: EHCI: fix crash during suspend on ASUS
computers) added a workaround for an ASUS suspend issue related to
USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut
down the EHCI controller during system suspend if its PCI command
register doesn't contain 0 at that time.

It turns out that the same workaround is necessary in the analogous
hibernation code path, so add it.

References: https://bugzilla.kernel.org/show_bug.cgi?id=45811
Reported-and-tested-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pci-driver.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -952,6 +952,13 @@ static int pci_pm_poweroff_noirq(struct
 	if (!pci_dev->state_saved && !pci_is_bridge(pci_dev))
 		pci_prepare_to_sleep(pci_dev);
 
+	/*
+	 * The reason for doing this here is the same as for the analogous code
+	 * in pci_pm_suspend_noirq().
+	 */
+	if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+		pci_write_config_word(pci_dev, PCI_COMMAND, 0);
+
 	return 0;
 }
 

[ 47/85] block: replace __getblk_slow misfix by grow_dev_page fix

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@google.com>

commit 676ce6d5ca3098339c028d44fe0427d1566a4d2d upstream.

Commit 91f68c89d8f3 ("block: fix infinite loop in __getblk_slow")
is not good: a successful call to grow_buffers() cannot guarantee
that the page won't be reclaimed before the immediate next call to
__find_get_block(), which is why there was always a loop there.

Yesterday I got "EXT4-fs error (device loop0): __ext4_get_inode_loc:3595:
inode #19278: block 664: comm cc1: unable to read itable block" on console,
which pointed to this commit.

I've been trying to bisect for weeks, why kbuild-on-ext4-on-loop-on-tmpfs
sometimes fails from a missing header file, under memory pressure on
ppc G5.  I've never seen this on x86, and I've never seen it on 3.5-rc7
itself, despite that commit being in there: bisection pointed to an
irrelevant pinctrl merge, but hard to tell when failure takes between
18 minutes and 38 hours (but so far it's happened quicker on 3.6-rc2).

(I've since found such __ext4_get_inode_loc errors in /var/log/messages
from previous weeks: why the message never appeared on console until
yesterday morning is a mystery for another day.)

Revert 91f68c89d8f3, restoring __getblk_slow() to how it was (plus
a checkpatch nitfix).  Simplify the interface between grow_buffers()
and grow_dev_page(), and avoid the infinite loop beyond end of device
by instead checking init_page_buffers()'s end_block there (I presume
that's more efficient than a repeated call to blkdev_max_block()),
returning -ENXIO to __getblk_slow() in that case.

And remove akpm's ten-year-old "__getblk() cannot fail ... weird"
comment, but that is worrying: are all users of __getblk() really
now prepared for a NULL bh beyond end of device, or will some oops??

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/buffer.c |   66 +++++++++++++++++++++++++++---------------------------------
 1 file changed, 30 insertions(+), 36 deletions(-)

--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -914,7 +914,7 @@ link_dev_buffers(struct page *page, stru
 /*
  * Initialise the state of a blockdev page's buffers.
  */ 
-static void
+static sector_t
 init_page_buffers(struct page *page, struct block_device *bdev,
 			sector_t block, int size)
 {
@@ -936,33 +936,41 @@ init_page_buffers(struct page *page, str
 		block++;
 		bh = bh->b_this_page;
 	} while (bh != head);
+
+	/*
+	 * Caller needs to validate requested block against end of device.
+	 */
+	return end_block;
 }
 
 /*
  * Create the page-cache page that contains the requested block.
  *
- * This is user purely for blockdev mappings.
+ * This is used purely for blockdev mappings.
  */
-static struct page *
+static int
 grow_dev_page(struct block_device *bdev, sector_t block,
-		pgoff_t index, int size)
+		pgoff_t index, int size, int sizebits)
 {
 	struct inode *inode = bdev->bd_inode;
 	struct page *page;
 	struct buffer_head *bh;
+	sector_t end_block;
+	int ret = 0;		/* Will call free_more_memory() */
 
 	page = find_or_create_page(inode->i_mapping, index,
 		(mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS)|__GFP_MOVABLE);
 	if (!page)
-		return NULL;
+		return ret;
 
 	BUG_ON(!PageLocked(page));
 
 	if (page_has_buffers(page)) {
 		bh = page_buffers(page);
 		if (bh->b_size == size) {
-			init_page_buffers(page, bdev, block, size);
-			return page;
+			end_block = init_page_buffers(page, bdev,
+						index << sizebits, size);
+			goto done;
 		}
 		if (!try_to_free_buffers(page))
 			goto failed;
@@ -982,14 +990,14 @@ grow_dev_page(struct block_device *bdev,
 	 */
 	spin_lock(&inode->i_mapping->private_lock);
 	link_dev_buffers(page, bh);
-	init_page_buffers(page, bdev, block, size);
+	end_block = init_page_buffers(page, bdev, index << sizebits, size);
 	spin_unlock(&inode->i_mapping->private_lock);
-	return page;
-
+done:
+	ret = (block < end_block) ? 1 : -ENXIO;
 failed:
 	unlock_page(page);
 	page_cache_release(page);
-	return NULL;
+	return ret;
 }
 
 /*
@@ -999,7 +1007,6 @@ failed:
 static int
 grow_buffers(struct block_device *bdev, sector_t block, int size)
 {
-	struct page *page;
 	pgoff_t index;
 	int sizebits;
 
@@ -1023,22 +1030,14 @@ grow_buffers(struct block_device *bdev,
 			bdevname(bdev, b));
 		return -EIO;
 	}
-	block = index << sizebits;
+
 	/* Create a page with the proper size buffers.. */
-	page = grow_dev_page(bdev, block, index, size);
-	if (!page)
-		return 0;
-	unlock_page(page);
-	page_cache_release(page);
-	return 1;
+	return grow_dev_page(bdev, block, index, size, sizebits);
 }
 
 static struct buffer_head *
 __getblk_slow(struct block_device *bdev, sector_t block, int size)
 {
-	int ret;
-	struct buffer_head *bh;
-
 	/* Size must be multiple of hard sectorsize */
 	if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
 			(size < 512 || size > PAGE_SIZE))) {
@@ -1051,21 +1050,20 @@ __getblk_slow(struct block_device *bdev,
 		return NULL;
 	}
 
-retry:
-	bh = __find_get_block(bdev, block, size);
-	if (bh)
-		return bh;
+	for (;;) {
+		struct buffer_head *bh;
+		int ret;
 
-	ret = grow_buffers(bdev, block, size);
-	if (ret == 0) {
-		free_more_memory();
-		goto retry;
-	} else if (ret > 0) {
 		bh = __find_get_block(bdev, block, size);
 		if (bh)
 			return bh;
+
+		ret = grow_buffers(bdev, block, size);
+		if (ret < 0)
+			return NULL;
+		if (ret == 0)
+			free_more_memory();
 	}
-	return NULL;
 }
 
 /*
@@ -1321,10 +1319,6 @@ EXPORT_SYMBOL(__find_get_block);
  * which corresponds to the passed block_device, block and size. The
  * returned buffer has its reference count incremented.
  *
- * __getblk() cannot fail - it just keeps trying.  If you pass it an
- * illegal block number, __getblk() will happily return a buffer_head
- * which represents the non-existent block.  Very weird.
- *
  * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers()
  * attempt is failing.  FIXME, perhaps?
  */

[ 48/85] sched,cgroup: Fix up task_groups list

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Galbraith <efault@gmx.de>

commit 35cf4e50b16331def6cfcbee11e49270b6db07f5 upstream.

With multiple instances of task_groups, for_each_rt_rq() is a noop,
no task groups having been added to the rt.c list instance.  This
renders __enable/disable_runtime() and print_rt_stats() noop, the
user (non) visible effect being that rt task groups are missing in
/proc/sched_debug.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344308413.6846.7.camel@marge.simpson.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/sched/core.c  |    1 +
 kernel/sched/sched.h |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -7011,6 +7011,7 @@ int in_sched_functions(unsigned long add
 
 #ifdef CONFIG_CGROUP_SCHED
 struct task_group root_task_group;
+LIST_HEAD(task_groups);
 #endif
 
 DECLARE_PER_CPU(cpumask_var_t, load_balance_tmpmask);
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -80,7 +80,7 @@ extern struct mutex sched_domains_mutex;
 struct cfs_rq;
 struct rt_rq;
 
-static LIST_HEAD(task_groups);
+extern struct list_head task_groups;
 
 struct cfs_bandwidth {
 #ifdef CONFIG_CFS_BANDWIDTH

[ 49/85] sched: fix divide by zero at {thread_group,task}_times

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit bea6832cc8c4a0a9a65dd17da6aaa657fe27bc3e upstream.

On architectures where cputime_t is 64 bit type, is possible to trigger
divide by zero on do_div(temp, (__force u32) total) line, if total is a
non zero number but has lower 32 bit's zeroed. Removing casting is not
a good solution since some do_div() implementations do cast to u32
internally.

This problem can be triggered in practice on very long lived processes:

  PID: 2331   TASK: ffff880472814b00  CPU: 2   COMMAND: "oraagent.bin"
   #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b
   #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2
   #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00
   #3 [ffff880472a51cd0] die at ffffffff8100f26b
   #4 [ffff880472a51d00] do_trap at ffffffff814f03f4
   #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff
   #6 [ffff880472a51e00] divide_error at ffffffff8100be7b
      [exception RIP: thread_group_times+0x56]
      RIP: ffffffff81056a16  RSP: ffff880472a51eb8  RFLAGS: 00010046
      RAX: bc3572c9fe12d194  RBX: ffff880874150800  RCX: 0000000110266fad
      RDX: 0000000000000000  RSI: ffff880472a51eb8  RDI: 001038ae7d9633dc
      RBP: ffff880472a51ef8   R8: 00000000b10a3a64   R9: ffff880874150800
      R10: 00007fcba27ab680  R11: 0000000000000202  R12: ffff880472a51f08
      R13: ffff880472a51f10  R14: 0000000000000000  R15: 0000000000000007
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
   #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d
   #8 [ffff880472a51f40] sys_times at ffffffff81088524
   #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2
      RIP: 0000003808caac3a  RSP: 00007fcba27ab6d8  RFLAGS: 00000202
      RAX: 0000000000000064  RBX: ffffffff8100b0f2  RCX: 0000000000000000
      RDX: 00007fcba27ab6e0  RSI: 000000000076d58e  RDI: 00007fcba27ab6e0
      RBP: 00007fcba27ab700   R8: 0000000000000020   R9: 000000000000091b
      R10: 00007fcba27ab680  R11: 0000000000000202  R12: 00007fff9ca41940
      R13: 0000000000000000  R14: 00007fcba27ac9c0  R15: 00007fff9ca41940
      ORIG_RAX: 0000000000000064  CS: 0033  SS: 002b

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/sched/core.c |   34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3084,6 +3084,20 @@ void thread_group_times(struct task_stru
 # define nsecs_to_cputime(__nsecs)	nsecs_to_jiffies(__nsecs)
 #endif
 
+static cputime_t scale_utime(cputime_t utime, cputime_t rtime, cputime_t total)
+{
+	u64 temp = (__force u64) rtime;
+
+	temp *= (__force u64) utime;
+
+	if (sizeof(cputime_t) == 4)
+		temp = div_u64(temp, (__force u32) total);
+	else
+		temp = div64_u64(temp, (__force u64) total);
+
+	return (__force cputime_t) temp;
+}
+
 void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
 {
 	cputime_t rtime, utime = p->utime, total = utime + p->stime;
@@ -3093,13 +3107,9 @@ void task_times(struct task_struct *p, c
 	 */
 	rtime = nsecs_to_cputime(p->se.sum_exec_runtime);
 
-	if (total) {
-		u64 temp = (__force u64) rtime;
-
-		temp *= (__force u64) utime;
-		do_div(temp, (__force u32) total);
-		utime = (__force cputime_t) temp;
-	} else
+	if (total)
+		utime = scale_utime(utime, rtime, total);
+	else
 		utime = rtime;
 
 	/*
@@ -3126,13 +3136,9 @@ void thread_group_times(struct task_stru
 	total = cputime.utime + cputime.stime;
 	rtime = nsecs_to_cputime(cputime.sum_exec_runtime);
 
-	if (total) {
-		u64 temp = (__force u64) rtime;
-
-		temp *= (__force u64) cputime.utime;
-		do_div(temp, (__force u32) total);
-		utime = (__force cputime_t) temp;
-	} else
+	if (total)
+		utime = scale_utime(cputime.utime, rtime, total);
+	else
 		utime = rtime;
 
 	sig->prev_utime = max(sig->prev_utime, utime);

[ 50/85] [media] uvcvideo: Reset the bytesused field when recycling an erroneous buffer

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jayakrishnan Memana <jayakrishnan.memana@maxim-ic.com>

commit 8a3f0ede2b3f5477122060af1a816c6bbf09fcd2 upstream.

Buffers marked as erroneous are recycled immediately by the driver if
the nodrop module parameter isn't set. The buffer payload size is reset
to 0, but the buffer bytesused field isn't. This results in the buffer
being immediately considered as complete, leading to an infinite loop in
interrupt context.

Fix the problem by resetting the bytesused field when recycling the
buffer.

Signed-off-by: Jayakrishnan Memana <jayakrishnan.memana@maxim-ic.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/video/uvc/uvc_queue.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -355,6 +355,7 @@ struct uvc_buffer *uvc_queue_next_buffer
 	if ((queue->flags & UVC_QUEUE_DROP_CORRUPTED) && buf->error) {
 		buf->error = 0;
 		buf->state = UVC_BUF_STATE_QUEUED;
+		buf->bytesused = 0;
 		vb2_set_plane_payload(&buf->buf, 0, 0);
 		return buf;
 	}

[ 51/85] rapidio/tsi721: fix inbound doorbell interrupt handling

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Bounine <alexandre.bounine@idt.com>

commit 3670e7e12e582c6d67761275d148171feb7a9004 upstream.

Make sure that there is no doorbell messages left behind due to disabled
interrupts during inbound doorbell processing.

The most common case for this bug is loss of rionet JOIN messages in
systems with three or more rionet participants and MSI or MSI-X enabled.
As result, requests for packet transfers may finish with "destination
unreachable" error message.

This patch is applicable to kernel versions starting from v3.2.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rapidio/devices/tsi721.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -439,6 +439,9 @@ static void tsi721_db_dpc(struct work_st
 				" info %4.4x\n", DBELL_SID(idb.bytes),
 				DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
 		}
+
+		wr_ptr = ioread32(priv->regs +
+				  TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
 	}
 
 	iowrite32(rd_ptr & (IDB_QSIZE - 1),
@@ -449,6 +452,10 @@ static void tsi721_db_dpc(struct work_st
 	regval |= TSI721_SR_CHINT_IDBQRCV;
 	iowrite32(regval,
 		priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+	wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+	if (wr_ptr != rd_ptr)
+		schedule_work(&priv->idb_work);
 }
 
 /**

[ 52/85] rapidio/tsi721: fix unused variable compiler warning

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Bounine <alexandre.bounine@idt.com>

commit 9a9a9a7adafe62a34de8b4fb48936c1c5f9bafa5 upstream.

Fix unused variable compiler warning when built with CONFIG_RAPIDIO_DEBUG
option off.

This patch is applicable to kernel versions starting from v3.2

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rapidio/devices/tsi721.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -2162,7 +2162,7 @@ static int __devinit tsi721_probe(struct
 				  const struct pci_device_id *id)
 {
 	struct tsi721_device *priv;
-	int i, cap;
+	int cap;
 	int err;
 	u32 regval;
 
@@ -2182,12 +2182,15 @@ static int __devinit tsi721_probe(struct
 	priv->pdev = pdev;
 
 #ifdef DEBUG
+	{
+	int i;
 	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
 		dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n",
 			i, (unsigned long long)pci_resource_start(pdev, i),
 			(unsigned long)pci_resource_len(pdev, i),
 			pci_resource_flags(pdev, i));
 	}
+	}
 #endif
 	/*
 	 * Verify BAR configuration

[ 53/85] regulator: twl-regulator: fix up VINTANA1/VINTANA2

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaro Koskinen <aaro.koskinen@iki.fi>

commit 908d6d52928a7f2a4b317aac47542c5fbef43d88 upstream.

It seems commit 2098e95ce9bb039ff2e7bf836df358d18a176139 (regulator: twl:
adapt twl-regulator driver to dt) accidentally deleted VINTANA1. Also
the same commit defines VINTANA2 twice with TWL4030_ADJUSTABLE_LDO and
TWL4030_FIXED_LDO. This patch changes the fixed one to be VINTANA1.

I noticed this when auditing my N900 boot logs. I could not notice any
change in device behaviour, though, except that the boot logs are now
like before:

	...
	[    0.282928] VDAC: 1800 mV normal standby
	[    0.284027] VCSI: 1800 mV normal standby
	[    0.285400] VINTANA1: 1500 mV normal standby
	[    0.286865] VINTANA2: 2750 mV normal standby
	[    0.288208] VINTDIG: 1500 mV normal standby
	[    0.289978] VSDI_CSI: 1800 mV normal standby
	...

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/twl-regulator.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -1085,7 +1085,7 @@ TWL6025_ADJUSTABLE_LDO(LDO7, 0x74, 1000,
 TWL6025_ADJUSTABLE_LDO(LDO6, 0x60, 1000, 3300);
 TWL6025_ADJUSTABLE_LDO(LDOLN, 0x64, 1000, 3300);
 TWL6025_ADJUSTABLE_LDO(LDOUSB, 0x70, 1000, 3300);
-TWL4030_FIXED_LDO(VINTANA2, 0x3f, 1500, 11, 100, 0x08);
+TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
 TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
 TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08);
 TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08);
@@ -1166,7 +1166,7 @@ static const struct of_device_id twl_of_
 	TWL6025_OF_MATCH("ti,twl6025-ldo6", LDO6),
 	TWL6025_OF_MATCH("ti,twl6025-ldoln", LDOLN),
 	TWL6025_OF_MATCH("ti,twl6025-ldousb", LDOUSB),
-	TWLFIXED_OF_MATCH("ti,twl4030-vintana2", VINTANA2),
+	TWLFIXED_OF_MATCH("ti,twl4030-vintana1", VINTANA1),
 	TWLFIXED_OF_MATCH("ti,twl4030-vintdig", VINTDIG),
 	TWLFIXED_OF_MATCH("ti,twl4030-vusb1v5", VUSB1V5),
 	TWLFIXED_OF_MATCH("ti,twl4030-vusb1v8", VUSB1V8),

[ 54/85] x32: Use compat shims for {g,s}etsockopt

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Frysinger <vapier@gentoo.org>

commit 515c7af85ed92696c311c53d53cb4898ff32d784 upstream.

Some of the arguments to {g,s}etsockopt are passed in userland pointers.
If we try to use the 64bit entry point, we end up sometimes failing.

For example, dhcpcd doesn't run in x32:
	# dhcpcd eth0
	dhcpcd[1979]: version 5.5.6 starting
	dhcpcd[1979]: eth0: broadcasting for a lease
	dhcpcd[1979]: eth0: open_socket: Invalid argument
	dhcpcd[1979]: eth0: send_raw_packet: Bad file descriptor

The code in particular is getting back EINVAL when doing:
	struct sock_fprog pf;
	setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &pf, sizeof(pf));

Diving into the kernel code, we can see:
include/linux/filter.h:
	struct sock_fprog {
		unsigned short len;
		struct sock_filter __user *filter;
	};

net/core/sock.c:
	case SO_ATTACH_FILTER:
		ret = -EINVAL;
		if (optlen == sizeof(struct sock_fprog)) {
			struct sock_fprog fprog;

			ret = -EFAULT;
			if (copy_from_user(&fprog, optval, sizeof(fprog)))
				break;

			ret = sk_attach_filter(&fprog, sk);
		}
		break;

arch/x86/syscalls/syscall_64.tbl:
	54 common setsockopt sys_setsockopt
	55 common getsockopt sys_getsockopt

So for x64, sizeof(sock_fprog) is 16 bytes.  For x86/x32, it's 8 bytes.
This comes down to the pointer being 32bit for x32, which means we need
to do structure size translation.  But since x32 comes in directly to
sys_setsockopt, it doesn't get translated like x86.

After changing the syscall table and rebuilding glibc with the new kernel
headers, dhcp runs fine in an x32 userland.

Oddly, it seems like Linus noted the same thing during the initial port,
but I guess that was missed/lost along the way:
	https://lkml.org/lkml/2011/8/26/452

[ hpa: tagging for -stable since this is an ABI fix. ]

Bugzilla: https://bugs.gentoo.org/423649
Reported-by: Mads <mads@ab3.no>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Link: http://lkml.kernel.org/r/1345320697-15713-1-git-send-email-vapier@gentoo.org
Cc: H. J. Lu <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/syscalls/syscall_64.tbl |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/x86/syscalls/syscall_64.tbl
+++ b/arch/x86/syscalls/syscall_64.tbl
@@ -60,8 +60,8 @@
 51	common	getsockname		sys_getsockname
 52	common	getpeername		sys_getpeername
 53	common	socketpair		sys_socketpair
-54	common	setsockopt		sys_setsockopt
-55	common	getsockopt		sys_getsockopt
+54	64	setsockopt		sys_setsockopt
+55	64	getsockopt		sys_getsockopt
 56	common	clone			stub_clone
 57	common	fork			stub_fork
 58	common	vfork			stub_vfork
@@ -351,3 +351,5 @@
 538	x32	sendmmsg		compat_sys_sendmmsg
 539	x32	process_vm_readv	compat_sys_process_vm_readv
 540	x32	process_vm_writev	compat_sys_process_vm_writev
+541	x32	setsockopt		compat_sys_setsockopt
+542	x32	getsockopt		compat_sys_getsockopt

[ 55/85] USB: spca506: remove __devinit* from the struct usb_device_id table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e694d518886c7afedcdd1732477832b2e32744e4 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/video/gspca/spca506.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -685,7 +685,7 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-static const struct usb_device_id device_table[] __devinitconst = {
+static const struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x06e1, 0xa190)},
 /*fixme: may be IntelPCCameraPro BRIDGE_SPCA505
 	{USB_DEVICE(0x0733, 0x0430)}, */

[ 56/85] USB: jl2005bcd: remove __devinit* from the struct usb_device_id table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ec063351684298e295dc9444d143ddfd6ab02df8 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/video/gspca/jl2005bcd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/video/gspca/jl2005bcd.c
+++ b/drivers/media/video/gspca/jl2005bcd.c
@@ -510,7 +510,7 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-static const __devinitdata struct usb_device_id device_table[] = {
+static const struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0979, 0x0227)},
 	{}
 };

[ 57/85] USB: p54usb: remove __devinit* from the struct usb_device_id table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b9c4167cbbafddac3462134013bc15e63e4c53ef upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Christian Lamparter <chunkeey@googlemail.com>
CC: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/p54/p54usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -42,7 +42,7 @@ MODULE_FIRMWARE("isl3887usb");
  * whenever you add a new device.
  */
 
-static struct usb_device_id p54u_table[] __devinitdata = {
+static struct usb_device_id p54u_table[] = {
 	/* Version 1 devices (pci chip + net2280) */
 	{USB_DEVICE(0x0411, 0x0050)},	/* Buffalo WLI2-USB2-G54 */
 	{USB_DEVICE(0x045e, 0x00c2)},	/* Microsoft MN-710 */

[ 58/85] USB: rtl8187: remove __devinit* from the struct usb_device_id table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a3433179d0822ccfa8e80aa4d1d52843bd2dcc63 upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Herton Ronaldo Krzesinski <herton@canonical.com>
CC: Hin-Tak Leung <htl10@users.sourceforge.net>
CC: Larry Finger <Larry.Finger@lwfinger.net>
CC: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rtl818x/rtl8187/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -44,7 +44,7 @@ MODULE_AUTHOR("Larry Finger <Larry.Finge
 MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
 MODULE_LICENSE("GPL");
 
-static struct usb_device_id rtl8187_table[] __devinitdata = {
+static struct usb_device_id rtl8187_table[] = {
 	/* Asus */
 	{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
 	/* Belkin */

[ 59/85] USB: smsusb: remove __devinit* from the struct usb_device_id table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d04dbd1c0ec17a13326c8f2279399c225836a79f upstream.

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Bjørn Mork <bjorn@mork.no>
CC: Mauro Carvalho Chehab <mchehab@infradead.org>
CC: Michael Krufky <mkrufky@linuxtv.org>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Doron Cohen <doronc@siano-ms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb/siano/smsusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -481,7 +481,7 @@ static int smsusb_resume(struct usb_inte
 	return 0;
 }
 
-static const struct usb_device_id smsusb_id_table[] __devinitconst = {
+static const struct usb_device_id smsusb_id_table[] = {
 	{ USB_DEVICE(0x187f, 0x0010),
 		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
 	{ USB_DEVICE(0x187f, 0x0100),

[ 60/85] USB: CDC ACM: Fix NULL pointer dereference

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sven Schnelle <svens@stackframe.org>

commit 99f347caa4568cb803862730b3b1f1942639523f upstream.

If a device specifies zero endpoints in its interface descriptor,
the kernel oopses in acm_probe(). Even though that's clearly an
invalid descriptor, we should test wether we have all endpoints.
This is especially bad as this oops can be triggered by just
plugging a USB device in.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1104,7 +1104,8 @@ skip_normal_probe:
 	}
 
 
-	if (data_interface->cur_altsetting->desc.bNumEndpoints < 2)
+	if (data_interface->cur_altsetting->desc.bNumEndpoints < 2 ||
+	    control_interface->cur_altsetting->desc.bNumEndpoints == 0)
 		return -EINVAL;
 
 	epctrl = &control_interface->cur_altsetting->endpoint[0].desc;

[ 61/85] powerpc: Update DSCR on all CPUs when writing sysfs dscr_default

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 1b6ca2a6fe56e7697d57348646e07df08f43b1bb upstream.

Writing to dscr_default in sysfs doesn't actually change the DSCR -
we rely on a context switch on each CPU to do the work. There is no
guarantee we will get a context switch in a reasonable amount of time
so fire off an IPI to force an immediate change.

This issue was found with the following test case:

http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/sysfs.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -194,6 +194,12 @@ static ssize_t show_dscr_default(struct
 	return sprintf(buf, "%lx\n", dscr_default);
 }
 
+static void update_dscr(void *dummy)
+{
+	if (!current->thread.dscr_inherit)
+		mtspr(SPRN_DSCR, dscr_default);
+}
+
 static ssize_t __used store_dscr_default(struct device *dev,
 		struct device_attribute *attr, const char *buf,
 		size_t count)
@@ -206,6 +212,8 @@ static ssize_t __used store_dscr_default
 		return -EINVAL;
 	dscr_default = val;
 
+	on_each_cpu(update_dscr, NULL, 1);
+
 	return count;
 }
 

[ 62/85] powerpc: Keep thread.dscr and thread.dscr_inherit in sync

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 00ca0de02f80924dfff6b4f630e1dff3db005e35 upstream.

When we update the DSCR either via emulation of mtspr(DSCR) or via
a change to dscr_default in sysfs we don't update thread.dscr.
We will eventually update it at context switch time but there is
a period where thread.dscr is incorrect.

If we fork at this point we will copy the old value of thread.dscr
into the child. To avoid this, always keep thread.dscr in sync with
reality.

This issue was found with the following testcase:

http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/sysfs.c |    4 +++-
 arch/powerpc/kernel/traps.c |    3 ++-
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -196,8 +196,10 @@ static ssize_t show_dscr_default(struct
 
 static void update_dscr(void *dummy)
 {
-	if (!current->thread.dscr_inherit)
+	if (!current->thread.dscr_inherit) {
+		current->thread.dscr = dscr_default;
 		mtspr(SPRN_DSCR, dscr_default);
+	}
 }
 
 static ssize_t __used store_dscr_default(struct device *dev,
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -972,8 +972,9 @@ static int emulate_instruction(struct pt
 			cpu_has_feature(CPU_FTR_DSCR)) {
 		PPC_WARN_EMULATED(mtdscr, regs);
 		rd = (instword >> 21) & 0x1f;
-		mtspr(SPRN_DSCR, regs->gpr[rd]);
+		current->thread.dscr = regs->gpr[rd];
 		current->thread.dscr_inherit = 1;
+		mtspr(SPRN_DSCR, current->thread.dscr);
 		return 0;
 	}
 #endif

[ 63/85] powerpc: Fix DSCR inheritance in copy_thread()

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 1021cb268b3025573c4811f1dee4a11260c4507b upstream.

If the default DSCR is non zero we set thread.dscr_inherit in
copy_thread() meaning the new thread and all its children will ignore
future updates to the default DSCR. This is not intended and is
a change in behaviour that a number of our users have hit.

We just need to inherit thread.dscr and thread.dscr_inherit from
the parent which ends up being much simpler.

This was found with the following test case:

http://ozlabs.org/~anton/junkcode/dscr_default_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/process.c |   12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -799,16 +799,8 @@ int copy_thread(unsigned long clone_flag
 #endif /* CONFIG_PPC_STD_MMU_64 */
 #ifdef CONFIG_PPC64 
 	if (cpu_has_feature(CPU_FTR_DSCR)) {
-		if (current->thread.dscr_inherit) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = current->thread.dscr;
-		} else if (0 != dscr_default) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = dscr_default;
-		} else {
-			p->thread.dscr_inherit = 0;
-			p->thread.dscr = 0;
-		}
+		p->thread.dscr_inherit = current->thread.dscr_inherit;
+		p->thread.dscr = current->thread.dscr;
 	}
 #endif
 

[ 64/85] powerpc: Restore correct DSCR in context switch

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 714332858bfd40dcf8f741498336d93875c23aa7 upstream.

During a context switch we always restore the per thread DSCR value.
If we aren't doing explicit DSCR management
(ie thread.dscr_inherit == 0) and the default DSCR changed while
the process has been sleeping we end up with the wrong value.

Check thread.dscr_inherit and select the default DSCR or per thread
DSCR as required.

This was found with the following test case, when running with
more threads than CPUs (ie forcing context switching):

http://ozlabs.org/~anton/junkcode/dscr_default_test.c

With the four patches applied I can run a combination of all
test cases successfully at the same time:

http://ozlabs.org/~anton/junkcode/dscr_default_test.c
http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c
http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/asm-offsets.c |    1 +
 arch/powerpc/kernel/entry_64.S    |   23 +++++++++++++++++------
 2 files changed, 18 insertions(+), 6 deletions(-)

--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -76,6 +76,7 @@ int main(void)
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
 	DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
+	DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -373,6 +373,12 @@ _GLOBAL(ret_from_fork)
 	li	r3,0
 	b	syscall_exit
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
+
 /*
  * This routine switches between two different tasks.  The process
  * state of one is saved on its kernel stack.  Then the state
@@ -512,9 +518,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEG
 	mr	r1,r8		/* start using new stack pointer */
 	std	r7,PACAKSAVE(r13)
 
-	ld	r6,_CCR(r1)
-	mtcrf	0xFF,r6
-
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	ld	r0,THREAD_VRSAVE(r4)
@@ -523,14 +526,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
+	lwz	r6,THREAD_DSCR_INHERIT(r4)
+	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
-	cmpd	r0,r25
-	beq	1f
+	cmpwi	r6,0
+	bne	1f
+	ld	r0,0(r7)
+1:	cmpd	r0,r25
+	beq	2f
 	mtspr	SPRN_DSCR,r0
-1:	
+2:
 END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 #endif
 
+	ld	r6,_CCR(r1)
+	mtcrf	0xFF,r6
+
 	/* r3-r13 are destroyed -- Cort */
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)

[ 65/85] powerpc: Make sure IPI handlers see data written by IPI senders

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@samba.org>

commit 9fb1b36ca1234e64a5d1cc573175303395e3354d upstream.

We have been observing hangs, both of KVM guest vcpu tasks and more
generally, where a process that is woken doesn't properly wake up and
continue to run, but instead sticks in TASK_WAKING state.  This
happens because the update of rq->wake_list in ttwu_queue_remote()
is not ordered with the update of ipi_message in
smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in
scheduler_ipi() is not ordered with the reading of ipi_message in
smp_ipi_demux().  Thus it is possible for the IPI receiver not to see
the updated rq->wake_list and therefore conclude that there is nothing
for it to do.

In order to make sure that anything done before smp_send_reschedule()
is ordered before anything done in the resulting call to scheduler_ipi(),
this adds barriers in smp_muxed_message_pass() and smp_ipi_demux().
The barrier in smp_muxed_message_pass() is a full barrier to ensure that
there is a full ordering between the smp_send_reschedule() caller and
scheduler_ipi().  In smp_ipi_demux(), we use xchg() rather than
xchg_local() because xchg() includes release and acquire barriers.
Using xchg() rather than xchg_local() makes sense given that
ipi_message is not just accessed locally.

This moves the barrier between setting the message and calling the
cause_ipi() function into the individual cause_ipi implementations.
Most of them -- those that used outb, out_8 or similar -- already had
a full barrier because out_8 etc. include a sync before the MMIO
store.  This adds an explicit barrier in the two remaining cases.

These changes made no measurable difference to the speed of IPIs as
measured using a simple ping-pong latency test across two CPUs on
different cores of a POWER7 machine.

The analysis of the reason why processes were not waking up properly
is due to Milton Miller.

Reported-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/dbell.c       |    2 ++
 arch/powerpc/kernel/smp.c         |   11 +++++++++--
 arch/powerpc/sysdev/xics/icp-hv.c |    6 +++++-
 3 files changed, 16 insertions(+), 3 deletions(-)

--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void)
 
 void doorbell_cause_ipi(int cpu, unsigned long data)
 {
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	mb();
 	ppc_msgsnd(PPC_DBELL, 0, data);
 }
 
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -215,8 +215,15 @@ void smp_muxed_ipi_message_pass(int cpu,
 	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
 	char *message = (char *)&info->messages;
 
+	/*
+	 * Order previous accesses before accesses in the IPI handler.
+	 */
+	smp_mb();
 	message[msg] = 1;
-	mb();
+	/*
+	 * cause_ipi functions are required to include a full barrier
+	 * before doing whatever causes the IPI.
+	 */
 	smp_ops->cause_ipi(cpu, info->data);
 }
 
@@ -228,7 +235,7 @@ irqreturn_t smp_ipi_demux(void)
 	mb();	/* order any irq clear */
 
 	do {
-		all = xchg_local(&info->messages, 0);
+		all = xchg(&info->messages, 0);
 
 #ifdef __BIG_ENDIAN
 		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsig
 static inline void icp_hv_set_qirr(int n_cpu , u8 value)
 {
 	int hw_cpu = get_hard_smp_processor_id(n_cpu);
-	long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+	long rc;
+
+	/* Make sure all previous accesses are ordered before IPI sending */
+	mb();
+	rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
 	if (rc != H_SUCCESS) {
 		pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
 			"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);

[ 66/85] Remove user-triggerable BUG from mpol_to_str

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Jones <davej@redhat.com>

commit 80de7c3138ee9fd86a98696fd2cf7ad89b995d0a upstream.

Trivially triggerable, found by trinity:

  kernel BUG at mm/mempolicy.c:2546!
  Process trinity-child2 (pid: 23988, threadinfo ffff88010197e000, task ffff88007821a670)
  Call Trace:
    show_numa_map+0xd5/0x450
    show_pid_numa_map+0x13/0x20
    traverse+0xf2/0x230
    seq_read+0x34b/0x3e0
    vfs_read+0xac/0x180
    sys_pread64+0xa2/0xc0
    system_call_fastpath+0x1a/0x1f
  RIP: mpol_to_str+0x156/0x360

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mempolicy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2536,7 +2536,7 @@ int mpol_to_str(char *buffer, int maxlen
 		break;
 
 	default:
-		BUG();
+		return -EINVAL;
 	}
 
 	l = strlen(policy_modes[mode]);

[ 67/85] Fix order of arguments to compat_put_time[spec|val]

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit ed6fe9d614fc1bca95eb8c0ccd0e92db00ef9d5d upstream.

Commit 644595f89620 ("compat: Handle COMPAT_USE_64BIT_TIME in
net/socket.c") introduced a bug where the helper functions to take
either a 64-bit or compat time[spec|val] got the arguments in the wrong
order, passing the kernel stack pointer off as a user pointer (and vice
versa).

Because of the user address range check, that in turn then causes an
EFAULT due to the user pointer range checking failing for the kernel
address.  Incorrectly resuling in a failed system call for 32-bit
processes with a 64-bit kernel.

On odder architectures like HP-PA (with separate user/kernel address
spaces), it can be used read kernel memory.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/socket.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/socket.c
+++ b/net/socket.c
@@ -2605,7 +2605,7 @@ static int do_siocgstamp(struct net *net
 	err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv);
 	set_fs(old_fs);
 	if (!err)
-		err = compat_put_timeval(up, &ktv);
+		err = compat_put_timeval(&ktv, up);
 
 	return err;
 }
@@ -2621,7 +2621,7 @@ static int do_siocgstampns(struct net *n
 	err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts);
 	set_fs(old_fs);
 	if (!err)
-		err = compat_put_timespec(up, &kts);
+		err = compat_put_timespec(&kts, up);
 
 	return err;
 }

[ 68/85] SCSI: megaraid_sas: Move poll_aen_lock initializer

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kashyap Desai <Kashyap.Desai@lsi.com>

commit bd8d6dd43a77bfd2b8fef5b094b9d6095e169dee upstream.

The following patch moves the poll_aen_lock initializer from
megasas_probe_one() to megasas_init().  This prevents a crash when a user
loads the driver and tries to issue a poll() system call on the ioctl
interface with no adapters present.

Signed-off-by: Kashyap Desai <Kashyap.Desai@lsi.com>
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/megaraid/megaraid_sas_base.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4066,7 +4066,6 @@ megasas_probe_one(struct pci_dev *pdev,
 	spin_lock_init(&instance->cmd_pool_lock);
 	spin_lock_init(&instance->hba_lock);
 	spin_lock_init(&instance->completion_lock);
-	spin_lock_init(&poll_aen_lock);
 
 	mutex_init(&instance->aen_mutex);
 	mutex_init(&instance->reset_mutex);
@@ -5392,6 +5391,8 @@ static int __init megasas_init(void)
 	printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
 	       MEGASAS_EXT_VERSION);
 
+	spin_lock_init(&poll_aen_lock);
+
 	support_poll_for_event = 2;
 	support_device_change = 1;
 

[ 69/85] SCSI: scsi_lib: fix scsi_io_completions SG_IO error propagation

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit 27c419739b67decced4650440829b8d51bef954b upstream.

The following v3.4-rc1 commit unmasked an existing bug in scsi_io_completion's
SG_IO error handling: 47ac56d [SCSI] scsi_error: classify some ILLEGAL_REQUEST
sense as a permanent TARGET_ERROR

Given that certain ILLEGAL_REQUEST are now properly categorized as
TARGET_ERROR the host_byte is being set (before host_byte wasn't ever
set for these ILLEGAL_REQUEST).

In scsi_io_completion, initialize req->errors with cmd->result _after_
the SG_IO block that calls __scsi_error_from_host_byte (which may
modify the host_byte).

Before this fix:

    cdb to send: 12 01 01 00 00 00
ioctl(3, SG_IO, {'S', SG_DXFER_NONE, cmd[6]=[12, 01, 01, 00, 00, 00],
    mx_sb_len=32, iovec_count=0, dxfer_len=0, timeout=20000, flags=0,
    status=02, masked_status=01, sb[19]=[70, 00, 05, 00, 00, 00, 00, 0b,
    00, 00, 00, 00, 24, 00, 00, 00, 00, 00, 00], host_status=0x10,
    driver_status=0x8, resid=0, duration=0, info=0x1}) = 0
SCSI Status: Check Condition

Sense Information:
sense buffer empty

After:

    cdb to send: 12 01 01 00 00 00
ioctl(3, SG_IO, {'S', SG_DXFER_NONE, cmd[6]=[12, 01, 01, 00, 00, 00],
    mx_sb_len=32, iovec_count=0, dxfer_len=0, timeout=20000, flags=0,
    status=02, masked_status=01, sb[19]=[70, 00, 05, 00, 00, 00, 00, 0b,
    00, 00, 00, 00, 24, 00, 00, 00, 00, 00, 00], host_status=0,
    driver_status=0x8, resid=0, duration=0, info=0x1}) = 0
SCSI Status: Check Condition

Sense Information:
 Fixed format, current;  Sense key: Illegal Request
 Additional sense: Invalid field in cdb
 Raw sense data (in hex):
        70 00 05 00 00 00 00 0b  00 00 00 00 24 00 00 00
        00 00 00

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Babu Moger <babu.moger@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

---
 drivers/scsi/scsi_lib.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -760,7 +760,6 @@ void scsi_io_completion(struct scsi_cmnd
 	}
 
 	if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */
-		req->errors = result;
 		if (result) {
 			if (sense_valid && req->sense) {
 				/*
@@ -776,6 +775,10 @@ void scsi_io_completion(struct scsi_cmnd
 			if (!sense_deferred)
 				error = __scsi_error_from_host_byte(cmd, result);
 		}
+		/*
+		 * __scsi_error_from_host_byte may have reset the host_byte
+		 */
+		req->errors = cmd->result;
 
 		req->resid_len = scsi_get_resid(cmd);
 

[ 70/85] SCSI: mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth command line option to a very small value

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "sreekanth.reddy@lsi.com" <sreekanth.reddy@lsi.com>

commit 338b131a3269881c7431234855c93c219b0979b6 upstream.

If the specified max_queue_depth setting is less than the
expected number of internal commands, then driver will calculate
the queue depth size to a negitive number. This negitive number
is actually a very large number because variable is unsigned
16bit integer. So, the driver will ask for a very large amount of
memory for message frames and resulting into oops as memory
allocation routines will not able to handle such a large request.

So, in order to limit this kind of oops, The driver need to set
the max_queue_depth to a scsi mid layer's can_queue value. Then
the overall message frames required for IO is minimum of either
(max_queue_depth plus internal commands) or the IOC global
credits.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/mpt2sas/mpt2sas_base.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -2417,10 +2417,13 @@ _base_allocate_memory_pools(struct MPT2S
 	}
 
 	/* command line tunables  for max controller queue depth */
-	if (max_queue_depth != -1)
-		max_request_credit = (max_queue_depth < facts->RequestCredit)
-		    ? max_queue_depth : facts->RequestCredit;
-	else
+	if (max_queue_depth != -1 && max_queue_depth != 0) {
+		max_request_credit = min_t(u16, max_queue_depth +
+			ioc->hi_priority_depth + ioc->internal_depth,
+			facts->RequestCredit);
+		if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+			max_request_credit =  MAX_HBA_QUEUE_DEPTH;
+	} else
 		max_request_credit = min_t(u16, facts->RequestCredit,
 		    MAX_HBA_QUEUE_DEPTH);
 
@@ -2495,7 +2498,7 @@ _base_allocate_memory_pools(struct MPT2S
 	/* set the scsi host can_queue depth
 	 * with some internal commands that could be outstanding
 	 */
-	ioc->shost->can_queue = ioc->scsiio_depth - (2);
+	ioc->shost->can_queue = ioc->scsiio_depth;
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
 	    "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
 

[ 71/85] SCSI: Fix Device not ready issue on mpt2sas

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <JBottomley@Parallels.com>

commit 14216561e164671ce147458653b1fea06a4ada1e upstream.

This is a particularly nasty SCSI ATA Translation Layer (SATL) problem.

SAT-2 says (section 8.12.2)

        if the device is in the stopped state as the result of
        processing a START STOP UNIT command (see 9.11), then the SATL
        shall terminate the TEST UNIT READY command with CHECK CONDITION
        status with the sense key set to NOT READY and the additional
        sense code of LOGICAL UNIT NOT READY, INITIALIZING COMMAND
        REQUIRED;

mpt2sas internal SATL seems to implement this.  The result is very confusing
standby behaviour (using hdparm -y).  If you suspend a drive and then send
another command, usually it wakes up.  However, if the next command is a TEST
UNIT READY, the SATL sees that the drive is suspended and proceeds to follow
the SATL rules for this, returning NOT READY to all subsequent commands.  This
means that the ordering of TEST UNIT READY is crucial: if you send TUR and
then a command, you get a NOT READY to both back.  If you send a command and
then a TUR, you get GOOD status because the preceeding command woke the drive.

This bit us badly because

commit 85ef06d1d252f6a2e73b678591ab71caad4667bb
Author: Tejun Heo <tj@kernel.org>
Date:   Fri Jul 1 16:17:47 2011 +0200

    block: flush MEDIA_CHANGE from drivers on close(2)

Changed our ordering on TEST UNIT READY commands meaning that SATA drives
connected to an mpt2sas now suspend and refuse to wake (because the mpt2sas
SATL sees the suspend *before* the drives get awoken by the next ATA command)
resulting in lots of failed commands.

The standard is completely nuts forcing this inconsistent behaviour, but we
have to work around it.

The fix for this is twofold:

   1. Set the allow_restart flag so we wake the drive when we see it has been
      suspended

   2. Return all TEST UNIT READY status directly to the mid layer without any
      further error handling which prevents us causing error handling which
      may offline the device just because of a media check TUR.

Reported-by: Matthias Prager <linux@matthiasprager.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_error.c |   10 ++++++++++
 drivers/scsi/scsi_scan.c  |   10 ++++++++++
 2 files changed, 20 insertions(+)

--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -42,6 +42,8 @@
 
 #include <trace/events/scsi.h>
 
+static void scsi_eh_done(struct scsi_cmnd *scmd);
+
 #define SENSE_TIMEOUT		(10*HZ)
 
 /*
@@ -241,6 +243,14 @@ static int scsi_check_sense(struct scsi_
 	if (! scsi_command_normalize_sense(scmd, &sshdr))
 		return FAILED;	/* no valid sense data */
 
+	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
+		/*
+		 * nasty: for mid-layer issued TURs, we need to return the
+		 * actual sense data without any recovery attempt.  For eh
+		 * issued ones, we need to try to recover and interpret
+		 */
+		return SUCCESS;
+
 	if (scsi_sense_is_deferred(&sshdr))
 		return NEEDS_RETRY;
 
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -776,6 +776,16 @@ static int scsi_add_lun(struct scsi_devi
 	sdev->model = (char *) (sdev->inquiry + 16);
 	sdev->rev = (char *) (sdev->inquiry + 32);
 
+	if (strncmp(sdev->vendor, "ATA     ", 8) == 0) {
+		/*
+		 * sata emulation layer device.  This is a hack to work around
+		 * the SATL power management specifications which state that
+		 * when the SATL detects the device has gone into standby
+		 * mode, it shall respond with NOT READY.
+		 */
+		sdev->allow_restart = 1;
+	}
+
 	if (*bflags & BLIST_ISROM) {
 		sdev->type = TYPE_ROM;
 		sdev->removable = 1;

[ 72/85] udf: Fix data corruption for files in ICB

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 9c2fc0de1a6e638fe58c354a463f544f42a90a09 upstream.

When a file is stored in ICB (inode), we overwrite part of the file, and
the page containing file's data is not in page cache, we end up corrupting
file's data by overwriting them with zeros. The problem is we use
simple_write_begin() which simply zeroes parts of the page which are not
written to. The problem has been introduced by be021ee4 (udf: convert to
new aops).

Fix the problem by providing a ->write_begin function which makes the page
properly uptodate.

Reported-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/file.c |   35 +++++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)

--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -39,20 +39,24 @@
 #include "udf_i.h"
 #include "udf_sb.h"
 
-static int udf_adinicb_readpage(struct file *file, struct page *page)
+static void __udf_adinicb_readpage(struct page *page)
 {
 	struct inode *inode = page->mapping->host;
 	char *kaddr;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 
-	BUG_ON(!PageLocked(page));
-
 	kaddr = kmap(page);
-	memset(kaddr, 0, PAGE_CACHE_SIZE);
 	memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, inode->i_size);
+	memset(kaddr + inode->i_size, 0, PAGE_CACHE_SIZE - inode->i_size);
 	flush_dcache_page(page);
 	SetPageUptodate(page);
 	kunmap(page);
+}
+
+static int udf_adinicb_readpage(struct file *file, struct page *page)
+{
+	BUG_ON(!PageLocked(page));
+	__udf_adinicb_readpage(page);
 	unlock_page(page);
 
 	return 0;
@@ -77,6 +81,25 @@ static int udf_adinicb_writepage(struct
 	return 0;
 }
 
+static int udf_adinicb_write_begin(struct file *file,
+			struct address_space *mapping, loff_t pos,
+			unsigned len, unsigned flags, struct page **pagep,
+			void **fsdata)
+{
+	struct page *page;
+
+	if (WARN_ON_ONCE(pos >= PAGE_CACHE_SIZE))
+		return -EIO;
+	page = grab_cache_page_write_begin(mapping, 0, flags);
+	if (!page)
+		return -ENOMEM;
+	*pagep = page;
+
+	if (!PageUptodate(page) && len != PAGE_CACHE_SIZE)
+		__udf_adinicb_readpage(page);
+	return 0;
+}
+
 static int udf_adinicb_write_end(struct file *file,
 			struct address_space *mapping,
 			loff_t pos, unsigned len, unsigned copied,
@@ -98,8 +121,8 @@ static int udf_adinicb_write_end(struct
 const struct address_space_operations udf_adinicb_aops = {
 	.readpage	= udf_adinicb_readpage,
 	.writepage	= udf_adinicb_writepage,
-	.write_begin = simple_write_begin,
-	.write_end = udf_adinicb_write_end,
+	.write_begin	= udf_adinicb_write_begin,
+	.write_end	= udf_adinicb_write_end,
 };
 
 static ssize_t udf_file_aio_write(struct kiocb *iocb, const struct iovec *iov,

[ 73/85] ext3: Fix fdatasync() for files with only i_size changes

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 156bddd8e505b295540f3ca0e27dda68cb0d49aa upstream.

Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.

Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.

Reported-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext3/inode.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -3068,6 +3068,8 @@ static int ext3_do_update_inode(handle_t
 	struct ext3_inode_info *ei = EXT3_I(inode);
 	struct buffer_head *bh = iloc->bh;
 	int err = 0, rc, block;
+	int need_datasync = 0;
+	__le32 disksize;
 
 again:
 	/* we can't allow multiple procs in here at once, its a bit racey */
@@ -3105,7 +3107,11 @@ again:
 		raw_inode->i_gid_high = 0;
 	}
 	raw_inode->i_links_count = cpu_to_le16(inode->i_nlink);
-	raw_inode->i_size = cpu_to_le32(ei->i_disksize);
+	disksize = cpu_to_le32(ei->i_disksize);
+	if (disksize != raw_inode->i_size) {
+		need_datasync = 1;
+		raw_inode->i_size = disksize;
+	}
 	raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec);
 	raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec);
 	raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec);
@@ -3121,8 +3127,11 @@ again:
 	if (!S_ISREG(inode->i_mode)) {
 		raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl);
 	} else {
-		raw_inode->i_size_high =
-			cpu_to_le32(ei->i_disksize >> 32);
+		disksize = cpu_to_le32(ei->i_disksize >> 32);
+		if (disksize != raw_inode->i_size_high) {
+			raw_inode->i_size_high = disksize;
+			need_datasync = 1;
+		}
 		if (ei->i_disksize > 0x7fffffffULL) {
 			struct super_block *sb = inode->i_sb;
 			if (!EXT3_HAS_RO_COMPAT_FEATURE(sb,
@@ -3175,6 +3184,8 @@ again:
 	ext3_clear_inode_state(inode, EXT3_STATE_NEW);
 
 	atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid);
+	if (need_datasync)
+		atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid);
 out_brelse:
 	brelse (bh);
 	ext3_std_error(inode->i_sb, err);

[ 74/85] fuse: fix retrieve length

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit c9e67d483776d8d2a5f3f70491161b205930ffe1 upstream.

In some cases fuse_retrieve() would return a short byte count if offset was
non-zero.  The data returned was correct, though.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fuse/dev.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1576,6 +1576,7 @@ static int fuse_retrieve(struct fuse_con
 		req->pages[req->num_pages] = page;
 		req->num_pages++;
 
+		offset = 0;
 		num -= this_num;
 		total_len += this_num;
 		index++;

[ 75/85] i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@gmail.com>

commit e68bb91baa0bb9817567bd45d560919e8e26373b upstream.

This patch adds config I2C_DESIGNWARE_CORE in Kconfig, and let
I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI select I2C_DESIGNWARE_CORE.

Because both I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI can be built as
built-in or module, we also need to export the functions in i2c-designware-core.

This fixes below build error when CONFIG_I2C_DESIGNWARE_PLATFORM=y &&
CONFIG_I2C_DESIGNWARE_PCI=y:

  LD      drivers/i2c/busses/built-in.o
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_clear_int':
i2c-designware-core.c:(.text+0xa10): multiple definition of `i2c_dw_clear_int'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x928): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_init':
i2c-designware-core.c:(.text+0x178): multiple definition of `i2c_dw_init'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x90): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `dw_readl':
i2c-designware-core.c:(.text+0xe8): multiple definition of `dw_readl'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x0): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_isr':
i2c-designware-core.c:(.text+0x724): multiple definition of `i2c_dw_isr'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x63c): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer':
i2c-designware-core.c:(.text+0x4b0): multiple definition of `i2c_dw_xfer'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c8): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_is_enabled':
i2c-designware-core.c:(.text+0x9d4): multiple definition of `i2c_dw_is_enabled'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8ec): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `dw_writel':
i2c-designware-core.c:(.text+0x124): multiple definition of `dw_writel'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer_msg':
i2c-designware-core.c:(.text+0x2e8): multiple definition of `i2c_dw_xfer_msg'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x200): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_enable':
i2c-designware-core.c:(.text+0x9c8): multiple definition of `i2c_dw_enable'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8e0): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_read_comp_param':
i2c-designware-core.c:(.text+0xa24): multiple definition of `i2c_dw_read_comp_param'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x93c): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable':
i2c-designware-core.c:(.text+0x9dc): multiple definition of `i2c_dw_disable'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8f4): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_func':
i2c-designware-core.c:(.text+0x710): multiple definition of `i2c_dw_func'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x628): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable_int':
i2c-designware-core.c:(.text+0xa18): multiple definition of `i2c_dw_disable_int'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x930): first defined here
make[3]: *** [drivers/i2c/busses/built-in.o] Error 1
make[2]: *** [drivers/i2c/busses] Error 2
make[1]: *** [drivers/i2c] Error 2
make: *** [drivers] Error 2

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/Kconfig               |    5 +++++
 drivers/i2c/busses/Makefile              |    5 +++--
 drivers/i2c/busses/i2c-designware-core.c |   11 +++++++++++
 3 files changed, 19 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -350,9 +350,13 @@ config I2C_DAVINCI
 	  devices such as DaVinci NIC.
 	  For details please see http://www.ti.com/davinci
 
+config I2C_DESIGNWARE_CORE
+	tristate
+
 config I2C_DESIGNWARE_PLATFORM
 	tristate "Synopsys DesignWare Platfrom"
 	depends on HAVE_CLK
+	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -363,6 +367,7 @@ config I2C_DESIGNWARE_PLATFORM
 config I2C_DESIGNWARE_PCI
 	tristate "Synopsys DesignWare PCI"
 	depends on PCI
+	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,10 +33,11 @@ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE_CORE)	+= i2c-designware-core.o
 obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
-i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
-i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o
 obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -25,6 +25,7 @@
  * ----------------------------------------------------------------------------
  *
  */
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -305,6 +306,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, dev->master_cfg , DW_IC_CON);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_init);
 
 /*
  * Waiting for bus not busy
@@ -557,12 +559,14 @@ done:
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_xfer);
 
 u32 i2c_dw_func(struct i2c_adapter *adap)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 	return dev->functionality;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_func);
 
 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 {
@@ -667,17 +671,20 @@ tx_aborted:
 
 	return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_isr);
 
 void i2c_dw_enable(struct dw_i2c_dev *dev)
 {
        /* Enable the adapter */
 	dw_writel(dev, 1, DW_IC_ENABLE);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_enable);
 
 u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev)
 {
 	return dw_readl(dev, DW_IC_ENABLE);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_is_enabled);
 
 void i2c_dw_disable(struct dw_i2c_dev *dev)
 {
@@ -688,18 +695,22 @@ void i2c_dw_disable(struct dw_i2c_dev *d
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
 	dw_readl(dev, DW_IC_CLR_INTR);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_disable);
 
 void i2c_dw_clear_int(struct dw_i2c_dev *dev)
 {
 	dw_readl(dev, DW_IC_CLR_INTR);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_clear_int);
 
 void i2c_dw_disable_int(struct dw_i2c_dev *dev)
 {
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
 
 u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
 {
 	return dw_readl(dev, DW_IC_COMP_PARAM_1);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);

[ 76/85] i2c-i801: Add Device IDs for Intel Lynx Point-LP PCH

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Ralston <james.d.ralston@intel.com>

commit 4a8f1ddde942e232387e6129ce4f4c412e43802f upstream.

Add the SMBus Device IDs for the Intel Lynx Point-LP PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/i2c/busses/i2c-i801 |    1 +
 drivers/i2c/busses/Kconfig        |    1 +
 drivers/i2c/busses/i2c-i801.c     |    3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -104,6 +104,7 @@ config I2C_I801
 	    DH89xxCC (PCH)
 	    Panther Point (PCH)
 	    Lynx Point (PCH)
+	    Lynx Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -52,6 +52,7 @@
   DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
   Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
   Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
+  Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -147,6 +148,7 @@
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -636,6 +638,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids)
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
 	{ 0, }
 };
 

[ 77/85] HID: add NOGET quirk for Eaton Ellipse MAX UPS

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 67ddbb3e6568fb1820b2cc45b00c50702b114801 upstream.

This patch (as1603) adds a NOGET quirk for the Eaton Ellipse MAX UPS
device.  (The USB IDs were already present in hid-ids.h, apparently
under a different name.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Laurent Bigonville <l.bigonville@edpnet.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/usbhid/hid-quirks.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -70,6 +70,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },

[ 78/85] Input: i8042 - add Gigabyte T1005 series netbooks to noloop table

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit 7b125b94ca16b7e618c6241cb02c4c8060cea5e3 upstream.

They all define their chassis type as "Other" and therefore are not
categorized as "laptops" by the driver, which tries to perform AUX IRQ
delivery test which fails and causes touchpad not working.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042-x86ia64io.h |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -177,6 +177,20 @@ static const struct dmi_system_id __init
 		},
 	},
 	{
+		/* Gigabyte T1005 - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005"),
+		},
+	},
+	{
+		/* Gigabyte T1005M/P - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"),
+		},
+	},
+	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),

[ 79/85] drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at boot

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit c4903429a92be60e6fe59868924a65eca4cd1a38 upstream.

This will cause udev to load vmwgfx instead of waiting for X
to do it.

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -182,6 +182,7 @@ static struct pci_device_id vmw_pci_id_l
 	{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
 	{0, 0, 0}
 };
+MODULE_DEVICE_TABLE(pci, vmw_pci_id_list);
 
 static int enable_fbdev;
 

[ 80/85] PARISC: Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mel Gorman <mgorman@suse.de>

commit bba3d8c3b3c0f2123be5bc687d1cddc13437c923 upstream.

The following build error occured during a parisc build with
swap-over-NFS patches applied.

net/core/sock.c:274:36: error: initializer element is not constant
net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks')
net/core/sock.c:274:36: error: initializer element is not constant

Dave Anglin says:
> Here is the line in sock.i:
>
> struct static_key memalloc_socks = ((struct static_key) { .enabled =
> ((atomic_t) { (0) }) });

The above line contains two compound literals.  It also uses a designated
initializer to initialize the field enabled.  A compound literal is not a
constant expression.

The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/include/asm/atomic.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unles
 
 #define atomic_sub_and_test(i,v)	(atomic_sub_return((i),(v)) == 0)
 
-#define ATOMIC_INIT(i)	((atomic_t) { (i) })
+#define ATOMIC_INIT(i)	{ (i) }
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
@@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unles
 
 #ifdef CONFIG_64BIT
 
-#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+#define ATOMIC64_INIT(i) { (i) }
 
 static __inline__ s64
 __atomic64_add_return(s64 i, atomic64_t *v)

[ 81/85] xen: Use correct masking in xen_swiotlb_alloc_coherent.

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ronny Hegewald <ronny.hegewald@online.de>

commit b5031ed1be0aa419250557123633453753181643 upstream.

When running 32-bit pvops-dom0 and a driver tries to allocate a coherent
DMA-memory the xen swiotlb-implementation returned memory beyond 4GB.

The underlaying reason is that if the supplied driver passes in a
DMA_BIT_MASK(64) ( hwdev->coherent_dma_mask is set to 0xffffffffffffffff)
our dma_mask will be u64 set to 0xffffffffffffffff even if we set it to
DMA_BIT_MASK(32) previously. Meaning we do not reset the upper bits.
By using the dma_alloc_coherent_mask function - it does the proper casting
and we get 0xfffffffff.

This caused not working sound on a system with 4 GB and a 64-bit
compatible sound-card with sets the DMA-mask to 64bit.

On bare-metal and the forward-ported xen-dom0 patches from OpenSuse a coherent
DMA-memory is always allocated inside the 32-bit address-range by calling
dma_alloc_coherent_mask.

This patch adds the same functionality to xen swiotlb and is a rebase of the
original patch from Ronny Hegewald which never got upstream b/c the
underlaying reason was not understood until now.

The original email with the original patch is in:
http://old-list-archives.xen.org/archives/html/xen-devel/2010-02/msg00038.html
the original thread from where the discussion started is in:
http://old-list-archives.xen.org/archives/html/xen-devel/2010-01/msg00928.html

Signed-off-by: Ronny Hegewald <ronny.hegewald@online.de>
Signed-off-by: Stefano Panella <stefano.panella@citrix.com>
Acked-By: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/swiotlb-xen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -232,7 +232,7 @@ xen_swiotlb_alloc_coherent(struct device
 		return ret;
 
 	if (hwdev && hwdev->coherent_dma_mask)
-		dma_mask = hwdev->coherent_dma_mask;
+		dma_mask = dma_alloc_coherent_mask(hwdev, flags);
 
 	phys = virt_to_phys(ret);
 	dev_addr = xen_phys_to_bus(phys);

[ 82/85] xen/pciback: Fix proper FLR steps.

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 80ba77dfbce85f2d1be54847de3c866de1b18a9a upstream.

When we do FLR and save PCI config we did it in the wrong order.
The end result was that if a PCI device was unbind from
its driver, then binded to xen-pciback, and then back to its
driver we would get:

> lspci -s 04:00.0
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
13:42:12 # 4 :~/
> echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind
> modprobe e1000e
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:04:00.0: Disabling ASPM L0s L1
e1000e 0000:04:00.0: enabling device (0000 -> 0002)
xen: registering gsi 48 triggering 0 polarity 1
Already setup the GSI :48
e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e: probe of 0000:04:00.0 failed with error -2

This fixes it by first saving the PCI configuration space, then
doing the FLR.

Reported-by: Ren, Yongjie <yongjie.ren@intel.com>
Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/xen-pciback/pci_stub.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -353,16 +353,16 @@ static int __devinit pcistub_init_device
 	if (err)
 		goto config_release;
 
-	dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
-	__pci_reset_function_locked(dev);
-
 	/* We need the device active to save the state. */
 	dev_dbg(&dev->dev, "save state of device\n");
 	pci_save_state(dev);
 	dev_data->pci_saved_state = pci_store_saved_state(dev);
 	if (!dev_data->pci_saved_state)
 		dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
-
+	else {
+		dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
+		__pci_reset_function_locked(dev);
+	}
 	/* Now disable the device (this also ensures some private device
 	 * data is setup before we export)
 	 */

[ 83/85] x86, microcode, AMD: Fix broken ucode patch size check

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Herrmann <andreas.herrmann3@amd.com>

commit 36bf50d7697be18c6bfd0401e037df10bff1e573 upstream.

This issue was recently observed on an AMD C-50 CPU where a patch of
maximum size was applied.

Commit be62adb49294 ("x86, microcode, AMD: Simplify ucode verification")
added current_size in get_matching_microcode(). This is calculated as
size of the ucode patch + 8 (ie. size of the header). Later this is
compared against the maximum possible ucode patch size for a CPU family.
And of course this fails if the patch has already maximum size.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/1344361461-10076-1-git-send-email-bp@amd64.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/microcode_amd.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -143,11 +143,12 @@ static int get_matching_microcode(int cp
 				  unsigned int *current_size)
 {
 	struct microcode_header_amd *mc_hdr;
-	unsigned int actual_size;
+	unsigned int actual_size, patch_size;
 	u16 equiv_cpu_id;
 
 	/* size of the current patch we're staring at */
-	*current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE;
+	patch_size = *(u32 *)(ucode_ptr + 4);
+	*current_size = patch_size + SECTION_HDR_SIZE;
 
 	equiv_cpu_id = find_equiv_id();
 	if (!equiv_cpu_id)
@@ -174,7 +175,7 @@ static int get_matching_microcode(int cp
 	/*
 	 * now that the header looks sane, verify its size
 	 */
-	actual_size = verify_ucode_size(cpu, *current_size, leftover_size);
+	actual_size = verify_ucode_size(cpu, patch_size, leftover_size);
 	if (!actual_size)
 		return 0;
 

[ 84/85] dccp: check ccid before dereferencing

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit 276bdb82dedb290511467a5a4fdbe9f0b52dce6f upstream.

ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with
a NULL ccid pointer leading to a NULL pointer dereference. This could
lead to a privilege escalation if the attacker is able to map page 0 and
prepare it with a fake ccid_ops pointer.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/dccp/ccid.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/dccp/ccid.h
+++ b/net/dccp/ccid.h
@@ -246,7 +246,7 @@ static inline int ccid_hc_rx_getsockopt(
 					u32 __user *optval, int __user *optlen)
 {
 	int rc = -ENOPROTOOPT;
-	if (ccid->ccid_ops->ccid_hc_rx_getsockopt != NULL)
+	if (ccid != NULL && ccid->ccid_ops->ccid_hc_rx_getsockopt != NULL)
 		rc = ccid->ccid_ops->ccid_hc_rx_getsockopt(sk, optname, len,
 						 optval, optlen);
 	return rc;
@@ -257,7 +257,7 @@ static inline int ccid_hc_tx_getsockopt(
 					u32 __user *optval, int __user *optlen)
 {
 	int rc = -ENOPROTOOPT;
-	if (ccid->ccid_ops->ccid_hc_tx_getsockopt != NULL)
+	if (ccid != NULL && ccid->ccid_ops->ccid_hc_tx_getsockopt != NULL)
 		rc = ccid->ccid_ops->ccid_hc_tx_getsockopt(sk, optname, len,
 						 optval, optlen);
 	return rc;

[ 85/85] hwmon: (asus_atk0110) Add quirk for Asus M5A78L

[Greg Kroah-Hartman]

From: Greg KH <gregkh@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luca Tettamanti <kronos.it@gmail.com>

commit 43ca6cb28c871f2fbad10117b0648e5ae3b0f638 upstream.

The old interface is bugged and reads the wrong sensor when retrieving
the reading for the chassis fan (it reads the CPU sensor); the new
interface works fine.

Reported-by: Göran Uddeborg <goeran@uddeborg.se>
Tested-by: Göran Uddeborg <goeran@uddeborg.se>
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/asus_atk0110.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -34,6 +34,12 @@ static const struct dmi_system_id __init
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58")
 		}
+	}, {
+		/* Old interface reads the same sensor for fan0 and fan1 */
+		.ident = "Asus M5A78L",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "M5A78L")
+		}
 	},
 	{ }
 };

Re: [ 00/85] 3.4.11-stable review

[Greg KH]

On Wed, Sep 12, 2012 at 04:35:43PM -0700, Greg Kroah-Hartman wrote:
> From: Greg KH <gregkh@linuxfoundation.org>
> 
> This is the start of the stable review cycle for the 3.4.11 release.
> There are 85 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Sep 14 23:35:39 UTC 2012.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.11-rc1.gz
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Shortlog of commits:
> 
> Patch Name                                                  	Original Commit ID	Author
> USB: vt6656: remove __devinit* from the struct usb_device_id	4d088876f24887cd15a2	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> USB: emi62: remove __devinit* from the struct usb_device_id 	83957df21dd94655d2b0	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ALSA: hda - fix Copyright debug message                     	088c820b732dbfd515fc	Wang Xingchao <xingchao.wang@intel.com>
> ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_V	3d9fb0038a9b02febb01	Will Deacon <will.deacon@arm.com>
> ARM: 7487/1: mm: avoid setting nG bit for user mappings that	47f1204329237a0f8655	Will Deacon <will.deacon@arm.com>
> ARM: 7488/1: mm: use 5 bits for swapfile type encoding      	f5f2025ef3e2cdb59370	Will Deacon <will.deacon@arm.com>
> ARM: 7489/1: errata: fix workaround for erratum #720789 on U	730a8128cd8978467eb1	Will Deacon <will.deacon@arm.com>
> ARM: OMAP2+: Fix dmtimer set source clock failure           	54f32a35f4d3a653a18a	Jon Hunter <jon-hunter@ti.com>
> ARM: S3C24XX: Add missing DMACH_DT_PROP                     	e1267371eacf2cbcf580	Heiko Stuebner <heiko@sntech.de>
> ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters            	b01858c7806e7e6f6121	Heiko Stuebner <heiko@sntech.de>
> Revert dma: imx-dma: Fix kernel crash due to missing clock c	upstream.	Fabio Estevam <festevam@gmail.com>

And my script broke here, for a patch that was not upstream, but was a
revert, which I guess shows it is working somehow...  I'll work on it
some more for the nextime this happens.

greg k-h

Re: [ 44/85] ACPI: export symbol acpi_get_table_with_size

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1855 bytes --]

On Wed, 2012-09-12 at 16:36 -0700, Greg Kroah-Hartman wrote:
> From: Greg KH <gregkh@linuxfoundation.org>
> 
> 3.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Alex Deucher <alexander.deucher@amd.com>
> 
> commit 4f81f986761a7663db7d24d24cd6ae68008f1fc2 upstream.
> 
> We need it in the radeon drm module to fetch
> and verify the vbios image on UEFI systems.

Same as for 3.0, this seems pointless without the dependent radeon
changes:

268ba0a drm/radeon: implement ACPI VFCT vbios fetch (v3)
7c3906d drm/radeon: convert radeon vfct code to use acpi_get_table_with_size
c61e277 drm/radeon: split ATRM support out from the ATPX handler (v3)

(For 3.2 I also needed these fixes from 3.3:

a3f83ab drm/radeon: fix invalid memory access in radeon_atrm_get_bios()
211fa4f drm/radeon: finish getting bios earlier
de47a9c drm/radeon: fix use after free in ATRM bios reading code.

but I don't know whether those would be sufficient to backport this lot
to 3.0.)

Ben.

> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/acpi/acpica/tbxface.c |    1 +
>  1 file changed, 1 insertion(+)
> 
> --- a/drivers/acpi/acpica/tbxface.c
> +++ b/drivers/acpi/acpica/tbxface.c
> @@ -436,6 +436,7 @@ acpi_get_table_with_size(char *signature
>  
>  	return (AE_NOT_FOUND);
>  }
> +ACPI_EXPORT_SYMBOL(acpi_get_table_with_size)
>  
>  acpi_status
>  acpi_get_table(char *signature,
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
Ben Hutchings
Logic doesn't apply to the real world. - Marvin Minsky

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]