* [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework
@ 2012-09-02 10:40 Thierry Reding
2012-09-02 10:40 ` [PATCH 1/2] mfd: twl: Replace twl_has_*() macros by IS_ENABLED() Thierry Reding
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Thierry Reding @ 2012-09-02 10:40 UTC (permalink / raw)
To: Samuel Ortiz
Cc: NeilBrown, Peter Ujfalusi, Benoit Cousson, Felipe Balbi, linux-kernel
Hi,
This mini series replaces the twl_has_*() macros by the equivalent
standard IS_ENABLED() macro and moves the PWM driver to the PWM
framework.
I'll take the second patch through the PWM tree but would like to have
some Acked-bys from people that know and have the hardware and can
verify that I haven't broken anything.
Thierry
Thierry Reding (2):
mfd: twl: Replace twl_has_*() macros by IS_ENABLED()
pwm: Move TWL6030 PWM driver to PWM framework
drivers/mfd/Kconfig | 10 ---
drivers/mfd/Makefile | 1 -
drivers/mfd/twl-core.c | 124 ++++++++-----------------------
drivers/mfd/twl6030-pwm.c | 165 -----------------------------------------
drivers/pwm/Kconfig | 9 +++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-twl6030.c | 184 ++++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 226 insertions(+), 268 deletions(-)
delete mode 100644 drivers/mfd/twl6030-pwm.c
create mode 100644 drivers/pwm/pwm-twl6030.c
--
1.7.12
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/2] mfd: twl: Replace twl_has_*() macros by IS_ENABLED()
2012-09-02 10:40 [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework Thierry Reding
@ 2012-09-02 10:40 ` Thierry Reding
2012-09-18 7:31 ` Peter Ujfalusi
2012-09-02 10:40 ` [PATCH 2/2] pwm: Move TWL6030 PWM driver to PWM framework Thierry Reding
2012-09-03 8:11 ` [PATCH 0/2] mfd: twl: Move " Peter Ujfalusi
2 siblings, 1 reply; 11+ messages in thread
From: Thierry Reding @ 2012-09-02 10:40 UTC (permalink / raw)
To: Samuel Ortiz
Cc: NeilBrown, Peter Ujfalusi, Benoit Cousson, Felipe Balbi, linux-kernel
Instead of reinventing macros for the same purpose, use the standard
macros.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
---
drivers/mfd/twl-core.c | 117 +++++++++++--------------------------------------
1 file changed, 25 insertions(+), 92 deletions(-)
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 1c32afe..5fbb2a6 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -63,70 +63,6 @@
#define DRIVER_NAME "twl"
-#if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE)
-#define twl_has_keypad() true
-#else
-#define twl_has_keypad() false
-#endif
-
-#if defined(CONFIG_GPIO_TWL4030) || defined(CONFIG_GPIO_TWL4030_MODULE)
-#define twl_has_gpio() true
-#else
-#define twl_has_gpio() false
-#endif
-
-#if defined(CONFIG_REGULATOR_TWL4030) \
- || defined(CONFIG_REGULATOR_TWL4030_MODULE)
-#define twl_has_regulator() true
-#else
-#define twl_has_regulator() false
-#endif
-
-#if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE)
-#define twl_has_madc() true
-#else
-#define twl_has_madc() false
-#endif
-
-#ifdef CONFIG_TWL4030_POWER
-#define twl_has_power() true
-#else
-#define twl_has_power() false
-#endif
-
-#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
-#define twl_has_rtc() true
-#else
-#define twl_has_rtc() false
-#endif
-
-#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE) ||\
- defined(CONFIG_TWL6030_USB) || defined(CONFIG_TWL6030_USB_MODULE)
-#define twl_has_usb() true
-#else
-#define twl_has_usb() false
-#endif
-
-#if defined(CONFIG_TWL4030_WATCHDOG) || \
- defined(CONFIG_TWL4030_WATCHDOG_MODULE)
-#define twl_has_watchdog() true
-#else
-#define twl_has_watchdog() false
-#endif
-
-#if defined(CONFIG_MFD_TWL4030_AUDIO) || \
- defined(CONFIG_MFD_TWL4030_AUDIO_MODULE)
-#define twl_has_codec() true
-#else
-#define twl_has_codec() false
-#endif
-
-#if defined(CONFIG_CHARGER_TWL4030) || defined(CONFIG_CHARGER_TWL4030_MODULE)
-#define twl_has_bci() true
-#else
-#define twl_has_bci() false
-#endif
-
/* Triton Core internal information (BEGIN) */
/* Last - for index max*/
@@ -134,13 +70,6 @@
#define TWL_NUM_SLAVES 4
-#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
- || defined(CONFIG_INPUT_TWL4030_PWRBUTTON_MODULE)
-#define twl_has_pwrbutton() true
-#else
-#define twl_has_pwrbutton() false
-#endif
-
#define SUB_CHIP_ID0 0
#define SUB_CHIP_ID1 1
#define SUB_CHIP_ID2 2
@@ -669,7 +598,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
struct device *child;
unsigned sub_chip_id;
- if (twl_has_gpio() && pdata->gpio) {
+ if (IS_ENABLED(CONFIG_GPIO_TWL4030) && pdata->gpio) {
child = add_child(SUB_CHIP_ID1, "twl4030_gpio",
pdata->gpio, sizeof(*pdata->gpio),
false, irq_base + GPIO_INTR_OFFSET, 0);
@@ -677,7 +606,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
}
- if (twl_has_keypad() && pdata->keypad) {
+ if (IS_ENABLED(CONFIG_KEYBOARD_TWL4030) && pdata->keypad) {
child = add_child(SUB_CHIP_ID2, "twl4030_keypad",
pdata->keypad, sizeof(*pdata->keypad),
true, irq_base + KEYPAD_INTR_OFFSET, 0);
@@ -685,7 +614,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
}
- if (twl_has_madc() && pdata->madc) {
+ if (IS_ENABLED(CONFIG_TWL4030_MADC) && pdata->madc) {
child = add_child(2, "twl4030_madc",
pdata->madc, sizeof(*pdata->madc),
true, irq_base + MADC_INTR_OFFSET, 0);
@@ -693,7 +622,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
}
- if (twl_has_rtc()) {
+ if (IS_ENABLED(CONFIG_RTC_DRV_TWL4030)) {
/*
* REVISIT platform_data here currently might expose the
* "msecure" line ... but for now we just expect board
@@ -709,7 +638,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
}
- if (twl_has_usb() && pdata->usb && twl_class_is_4030()) {
+ if (IS_ENABLED(CONFIG_TWL4030_USB) && pdata->usb &&
+ twl_class_is_4030()) {
static struct regulator_consumer_supply usb1v5 = {
.supply = "usb1v5",
@@ -723,7 +653,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
};
/* First add the regulators so that they can be used by transceiver */
- if (twl_has_regulator()) {
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030)) {
/* this is a template that gets copied */
struct regulator_init_data usb_fixed = {
.constraints.valid_modes_mask =
@@ -765,18 +695,19 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
/* we need to connect regulators to this transceiver */
- if (twl_has_regulator() && child) {
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && child) {
usb1v5.dev_name = dev_name(child);
usb1v8.dev_name = dev_name(child);
usb3v1[0].dev_name = dev_name(child);
}
}
- if (twl_has_usb() && pdata->usb && twl_class_is_6030()) {
+ if (IS_ENABLED(CONFIG_TWL6030_USB) && pdata->usb &&
+ twl_class_is_6030()) {
static struct regulator_consumer_supply usb3v3;
int regulator;
- if (twl_has_regulator()) {
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030)) {
/* this is a template that gets copied */
struct regulator_init_data usb_fixed = {
.constraints.valid_modes_mask =
@@ -813,9 +744,10 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
if (IS_ERR(child))
return PTR_ERR(child);
/* we need to connect regulators to this transceiver */
- if (twl_has_regulator() && child)
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && child)
usb3v3.dev_name = dev_name(child);
- } else if (twl_has_regulator() && twl_class_is_6030()) {
+ } else if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) &&
+ twl_class_is_6030()) {
if (features & TWL6025_SUBCLASS)
child = add_regulator(TWL6025_REG_LDOUSB,
pdata->ldousb, features);
@@ -827,20 +759,21 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
}
- if (twl_has_watchdog() && twl_class_is_4030()) {
+ if (IS_ENABLED(CONFIG_TWL4030_WATCHDOG) && twl_class_is_4030()) {
child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0);
if (IS_ERR(child))
return PTR_ERR(child);
}
- if (twl_has_pwrbutton() && twl_class_is_4030()) {
+ if (IS_ENABLED(CONFIG_INPUT_TWL4030_PWRBUTTON) && twl_class_is_4030()) {
child = add_child(1, "twl4030_pwrbutton",
NULL, 0, true, irq_base + 8 + 0, 0);
if (IS_ERR(child))
return PTR_ERR(child);
}
- if (twl_has_codec() && pdata->audio && twl_class_is_4030()) {
+ if (IS_ENABLED(CONFIG_MFD_TWL4030_AUDIO) && pdata->audio &&
+ twl_class_is_4030()) {
sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
child = add_child(sub_chip_id, "twl4030-audio",
pdata->audio, sizeof(*pdata->audio),
@@ -850,7 +783,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
}
/* twl4030 regulators */
- if (twl_has_regulator() && twl_class_is_4030()) {
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_4030()) {
child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1,
features);
if (IS_ERR(child))
@@ -905,7 +838,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
}
/* maybe add LDOs that are omitted on cost-reduced parts */
- if (twl_has_regulator() && !(features & TPS_SUBSET)
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && !(features & TPS_SUBSET)
&& twl_class_is_4030()) {
child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2,
features);
@@ -939,7 +872,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
}
/* twl6030 regulators */
- if (twl_has_regulator() && twl_class_is_6030() &&
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030() &&
!(features & TWL6025_SUBCLASS)) {
child = add_regulator(TWL6030_REG_VDD1, pdata->vdd1,
features);
@@ -1013,7 +946,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
}
/* 6030 and 6025 share this regulator */
- if (twl_has_regulator() && twl_class_is_6030()) {
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030()) {
child = add_regulator(TWL6030_REG_VANA, pdata->vana,
features);
if (IS_ERR(child))
@@ -1021,7 +954,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
}
/* twl6025 regulators */
- if (twl_has_regulator() && twl_class_is_6030() &&
+ if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030() &&
(features & TWL6025_SUBCLASS)) {
child = add_regulator(TWL6025_REG_LDO5, pdata->ldo5,
features);
@@ -1080,7 +1013,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
}
- if (twl_has_bci() && pdata->bci &&
+ if (IS_ENABLED(CONFIG_CHARGER_TWL4030) && pdata->bci &&
!(features & (TPS_SUBSET | TWL5031))) {
child = add_child(3, "twl4030_bci",
pdata->bci, sizeof(*pdata->bci), false,
@@ -1292,7 +1225,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
}
/* load power event scripts */
- if (twl_has_power() && pdata->power)
+ if (IS_ENABLED(CONFIG_TWL4030_POWER) && pdata->power)
twl4030_power_init(pdata->power);
/* Maybe init the T2 Interrupt subsystem */
--
1.7.12
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/2] pwm: Move TWL6030 PWM driver to PWM framework
2012-09-02 10:40 [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework Thierry Reding
2012-09-02 10:40 ` [PATCH 1/2] mfd: twl: Replace twl_has_*() macros by IS_ENABLED() Thierry Reding
@ 2012-09-02 10:40 ` Thierry Reding
2012-09-03 8:15 ` Peter Ujfalusi
2012-09-03 8:11 ` [PATCH 0/2] mfd: twl: Move " Peter Ujfalusi
2 siblings, 1 reply; 11+ messages in thread
From: Thierry Reding @ 2012-09-02 10:40 UTC (permalink / raw)
To: Samuel Ortiz
Cc: NeilBrown, Peter Ujfalusi, Benoit Cousson, Felipe Balbi, linux-kernel
This commit moves the driver to drivers/pwm and converts it to the new
PWM framework. In order for this to work properly, register the PWM as
child of the multi-function TWL6030 device.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
---
drivers/mfd/Kconfig | 10 ---
drivers/mfd/Makefile | 1 -
drivers/mfd/twl-core.c | 7 ++
drivers/mfd/twl6030-pwm.c | 165 -----------------------------------------
drivers/pwm/Kconfig | 9 +++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-twl6030.c | 184 ++++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 201 insertions(+), 176 deletions(-)
delete mode 100644 drivers/mfd/twl6030-pwm.c
create mode 100644 drivers/pwm/pwm-twl6030.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d1facef..2f45891 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -298,16 +298,6 @@ config MFD_TWL4030_AUDIO
select MFD_CORE
default n
-config TWL6030_PWM
- tristate "TWL6030 PWM (Pulse Width Modulator) Support"
- depends on TWL4030_CORE
- select HAVE_PWM
- depends on !PWM
- default n
- help
- Say yes here if you want support for TWL6030 PWM.
- This is used to control charging LED brightness.
-
config TWL6040_CORE
bool "Support for TWL6040 audio codec"
depends on I2C=y && GENERIC_HARDIRQS
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 79dd22d..53063a8 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -63,7 +63,6 @@ obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o
-obj-$(CONFIG_TWL6030_PWM) += twl6030-pwm.o
obj-$(CONFIG_TWL6040_CORE) += twl6040-core.o twl6040-irq.o
obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 5fbb2a6..1b1a789 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -638,6 +638,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
}
+ if (IS_ENABLED(CONFIG_PWM_TWL6030)) {
+ child = add_child(TWL6030_MODULE_ID1, "twl6030-pwm", NULL, 0,
+ false, 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
if (IS_ENABLED(CONFIG_TWL4030_USB) && pdata->usb &&
twl_class_is_4030()) {
diff --git a/drivers/mfd/twl6030-pwm.c b/drivers/mfd/twl6030-pwm.c
deleted file mode 100644
index e8fee14..0000000
--- a/drivers/mfd/twl6030-pwm.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * twl6030_pwm.c
- * Driver for PHOENIX (TWL6030) Pulse Width Modulator
- *
- * Copyright (C) 2010 Texas Instruments
- * Author: Hemanth V <hemanthv@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-#include <linux/slab.h>
-
-#define LED_PWM_CTRL1 0xF4
-#define LED_PWM_CTRL2 0xF5
-
-/* Max value for CTRL1 register */
-#define PWM_CTRL1_MAX 255
-
-/* Pull down disable */
-#define PWM_CTRL2_DIS_PD (1 << 6)
-
-/* Current control 2.5 milli Amps */
-#define PWM_CTRL2_CURR_02 (2 << 4)
-
-/* LED supply source */
-#define PWM_CTRL2_SRC_VAC (1 << 2)
-
-/* LED modes */
-#define PWM_CTRL2_MODE_HW (0 << 0)
-#define PWM_CTRL2_MODE_SW (1 << 0)
-#define PWM_CTRL2_MODE_DIS (2 << 0)
-
-#define PWM_CTRL2_MODE_MASK 0x3
-
-struct pwm_device {
- const char *label;
- unsigned int pwm_id;
-};
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- u8 duty_cycle;
- int ret;
-
- if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
- return -EINVAL;
-
- duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1);
-
- if (ret < 0) {
- pr_err("%s: Failed to configure PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
- return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
- u8 val;
- int ret;
-
- ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- if (ret < 0) {
- pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret);
- return ret;
- }
-
- /* Change mode to software control */
- val &= ~PWM_CTRL2_MODE_MASK;
- val |= PWM_CTRL2_MODE_SW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
- if (ret < 0) {
- pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret);
- return ret;
- }
-
- twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- return 0;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- u8 val;
- int ret;
-
- ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- if (ret < 0) {
- pr_err("%s: Failed to disable PWM, Error %d\n",
- pwm->label, ret);
- return;
- }
-
- val &= ~PWM_CTRL2_MODE_MASK;
- val |= PWM_CTRL2_MODE_HW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
- if (ret < 0) {
- pr_err("%s: Failed to disable PWM, Error %d\n",
- pwm->label, ret);
- return;
- }
- return;
-}
-EXPORT_SYMBOL(pwm_disable);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- u8 val;
- int ret;
- struct pwm_device *pwm;
-
- pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (pwm == NULL) {
- pr_err("%s: failed to allocate memory\n", label);
- return NULL;
- }
-
- pwm->label = label;
- pwm->pwm_id = pwm_id;
-
- /* Configure PWM */
- val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC |
- PWM_CTRL2_MODE_HW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
-
- if (ret < 0) {
- pr_err("%s: Failed to configure PWM, Error %d\n",
- pwm->label, ret);
-
- kfree(pwm);
- return NULL;
- }
-
- return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
- pwm_disable(pwm);
- kfree(pwm);
-}
-EXPORT_SYMBOL(pwm_free);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index e678005..ed81720 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -142,6 +142,15 @@ config PWM_TIEHRPWM
To compile this driver as a module, choose M here: the module
will be called pwm-tiehrpwm.
+config PWM_TWL6030
+ tristate "TWL6030 PWM support"
+ depends on TWL4030_CORE
+ help
+ Generic PWM framework driver for TWL6030.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-twl6030.
+
config PWM_VT8500
tristate "vt8500 pwm support"
depends on ARCH_VT8500
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 29cf57e..acfe482 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -11,4 +11,5 @@ obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
+obj-$(CONFIG_PWM_TWL6030) += pwm-twl6030.o
obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o
diff --git a/drivers/pwm/pwm-twl6030.c b/drivers/pwm/pwm-twl6030.c
new file mode 100644
index 0000000..8e63878
--- /dev/null
+++ b/drivers/pwm/pwm-twl6030.c
@@ -0,0 +1,184 @@
+/*
+ * twl6030_pwm.c
+ * Driver for PHOENIX (TWL6030) Pulse Width Modulator
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+#define LED_PWM_CTRL1 0xF4
+#define LED_PWM_CTRL2 0xF5
+
+/* Max value for CTRL1 register */
+#define PWM_CTRL1_MAX 255
+
+/* Pull down disable */
+#define PWM_CTRL2_DIS_PD (1 << 6)
+
+/* Current control 2.5 milli Amps */
+#define PWM_CTRL2_CURR_02 (2 << 4)
+
+/* LED supply source */
+#define PWM_CTRL2_SRC_VAC (1 << 2)
+
+/* LED modes */
+#define PWM_CTRL2_MODE_HW (0 << 0)
+#define PWM_CTRL2_MODE_SW (1 << 0)
+#define PWM_CTRL2_MODE_DIS (2 << 0)
+
+#define PWM_CTRL2_MODE_MASK 0x3
+
+struct twl6030_pwm_chip {
+ struct pwm_chip chip;
+};
+
+static int twl6030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ int ret;
+ u8 val;
+
+ /* Configure PWM */
+ val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC |
+ PWM_CTRL2_MODE_HW;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to configure PWM, Error %d\n",
+ pwm->label, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int twl6030_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ u8 duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns;
+ int ret;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1);
+ if (ret < 0) {
+ pr_err("%s: Failed to configure PWM, Error %d\n",
+ pwm->label, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ int ret;
+ u8 val;
+
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
+ pwm->label, ret);
+ return ret;
+ }
+
+ /* Change mode to software control */
+ val &= ~PWM_CTRL2_MODE_MASK;
+ val |= PWM_CTRL2_MODE_SW;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
+ pwm->label, ret);
+ return ret;
+ }
+
+ twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+ return 0;
+}
+
+static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ int ret;
+ u8 val;
+
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
+ pwm->label, ret);
+ return;
+ }
+
+ val &= ~PWM_CTRL2_MODE_MASK;
+ val |= PWM_CTRL2_MODE_HW;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
+ pwm->label, ret);
+ }
+}
+
+static const struct pwm_ops twl6030_pwm_ops = {
+ .request = twl6030_pwm_request,
+ .config = twl6030_pwm_config,
+ .enable = twl6030_pwm_enable,
+ .disable = twl6030_pwm_disable,
+};
+
+static int twl6030_pwm_probe(struct platform_device *pdev)
+{
+ struct twl6030_pwm_chip *twl6030;
+ int ret;
+
+ twl6030 = devm_kzalloc(&pdev->dev, sizeof(*twl6030), GFP_KERNEL);
+ if (!twl6030)
+ return -ENOMEM;
+
+ twl6030->chip.dev = &pdev->dev;
+ twl6030->chip.ops = &twl6030_pwm_ops;
+ twl6030->chip.base = -1;
+ twl6030->chip.npwm = 1;
+
+ ret = pwmchip_add(&twl6030->chip);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, twl6030);
+
+ return 0;
+}
+
+static int twl6030_pwm_remove(struct platform_device *pdev)
+{
+ struct twl6030_pwm_chip *twl6030 = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&twl6030->chip);
+}
+
+static struct platform_driver twl6030_pwm_driver = {
+ .driver = {
+ .name = "twl6030-pwm",
+ },
+ .probe = twl6030_pwm_probe,
+ .remove = __devexit_p(twl6030_pwm_remove),
+};
+module_platform_driver(twl6030_pwm_driver);
+
+MODULE_ALIAS("platform:twl6030-pwm");
+MODULE_LICENSE("GPL");
--
1.7.12
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework
2012-09-02 10:40 [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework Thierry Reding
2012-09-02 10:40 ` [PATCH 1/2] mfd: twl: Replace twl_has_*() macros by IS_ENABLED() Thierry Reding
2012-09-02 10:40 ` [PATCH 2/2] pwm: Move TWL6030 PWM driver to PWM framework Thierry Reding
@ 2012-09-03 8:11 ` Peter Ujfalusi
2012-09-07 13:19 ` Thierry Reding
2 siblings, 1 reply; 11+ messages in thread
From: Peter Ujfalusi @ 2012-09-03 8:11 UTC (permalink / raw)
To: Thierry Reding
Cc: Samuel Ortiz, NeilBrown, Benoit Cousson, Felipe Balbi, linux-kernel
Hi,
On 09/02/2012 01:40 PM, Thierry Reding wrote:
> Hi,
>
> This mini series replaces the twl_has_*() macros by the equivalent
> standard IS_ENABLED() macro and moves the PWM driver to the PWM
> framework.
>
> I'll take the second patch through the PWM tree but would like to have
> some Acked-bys from people that know and have the hardware and can
> verify that I haven't broken anything.
All looks good for me but I have one comment for patch 2.
>
> Thierry
>
> Thierry Reding (2):
> mfd: twl: Replace twl_has_*() macros by IS_ENABLED()
> pwm: Move TWL6030 PWM driver to PWM framework
>
> drivers/mfd/Kconfig | 10 ---
> drivers/mfd/Makefile | 1 -
> drivers/mfd/twl-core.c | 124 ++++++++-----------------------
> drivers/mfd/twl6030-pwm.c | 165 -----------------------------------------
> drivers/pwm/Kconfig | 9 +++
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-twl6030.c | 184 ++++++++++++++++++++++++++++++++++++++++++++++
> 7 files changed, 226 insertions(+), 268 deletions(-)
> delete mode 100644 drivers/mfd/twl6030-pwm.c
> create mode 100644 drivers/pwm/pwm-twl6030.c
>
--
Péter
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] pwm: Move TWL6030 PWM driver to PWM framework
2012-09-02 10:40 ` [PATCH 2/2] pwm: Move TWL6030 PWM driver to PWM framework Thierry Reding
@ 2012-09-03 8:15 ` Peter Ujfalusi
2012-09-07 13:17 ` Thierry Reding
0 siblings, 1 reply; 11+ messages in thread
From: Peter Ujfalusi @ 2012-09-03 8:15 UTC (permalink / raw)
To: Thierry Reding
Cc: Samuel Ortiz, NeilBrown, Benoit Cousson, Felipe Balbi, linux-kernel
On 09/02/2012 01:40 PM, Thierry Reding wrote:
> diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
> index 5fbb2a6..1b1a789 100644
> --- a/drivers/mfd/twl-core.c
> +++ b/drivers/mfd/twl-core.c
> @@ -638,6 +638,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
> return PTR_ERR(child);
> }
>
> + if (IS_ENABLED(CONFIG_PWM_TWL6030)) {
I think you should also check for the PMIC versions here before adding the child:
if (IS_ENABLED(CONFIG_PWM_TWL6030) && twl_class_is_6030()) {
To avoid loading the twl6030-pwm driver for twl4030 class.
> + child = add_child(TWL6030_MODULE_ID1, "twl6030-pwm", NULL, 0,
> + false, 0, 0);
> + if (IS_ERR(child))
> + return PTR_ERR(child);
> + }
> +
> if (IS_ENABLED(CONFIG_TWL4030_USB) && pdata->usb &&
> twl_class_is_4030()) {
>
> diff --git a/drivers/mfd/twl6030-pwm.c b/drivers/mfd/twl6030-pwm.c
> deleted file mode 100644
> index e8fee14..0000000
> --- a/drivers/mfd/twl6030-pwm.c
> +++ /dev/null
> @@ -1,165 +0,0 @@
> -/*
> - * twl6030_pwm.c
> - * Driver for PHOENIX (TWL6030) Pulse Width Modulator
> - *
> - * Copyright (C) 2010 Texas Instruments
> - * Author: Hemanth V <hemanthv@ti.com>
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published by
> - * the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful, but WITHOUT
> - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> - * more details.
> - *
> - * You should have received a copy of the GNU General Public License along with
> - * this program. If not, see <http://www.gnu.org/licenses/>.
> - */
> -
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/i2c/twl.h>
> -#include <linux/slab.h>
> -
> -#define LED_PWM_CTRL1 0xF4
> -#define LED_PWM_CTRL2 0xF5
> -
> -/* Max value for CTRL1 register */
> -#define PWM_CTRL1_MAX 255
> -
> -/* Pull down disable */
> -#define PWM_CTRL2_DIS_PD (1 << 6)
> -
> -/* Current control 2.5 milli Amps */
> -#define PWM_CTRL2_CURR_02 (2 << 4)
> -
> -/* LED supply source */
> -#define PWM_CTRL2_SRC_VAC (1 << 2)
> -
> -/* LED modes */
> -#define PWM_CTRL2_MODE_HW (0 << 0)
> -#define PWM_CTRL2_MODE_SW (1 << 0)
> -#define PWM_CTRL2_MODE_DIS (2 << 0)
> -
> -#define PWM_CTRL2_MODE_MASK 0x3
> -
> -struct pwm_device {
> - const char *label;
> - unsigned int pwm_id;
> -};
> -
> -int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
> -{
> - u8 duty_cycle;
> - int ret;
> -
> - if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
> - return -EINVAL;
> -
> - duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns;
> -
> - ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1);
> -
> - if (ret < 0) {
> - pr_err("%s: Failed to configure PWM, Error %d\n",
> - pwm->label, ret);
> - return ret;
> - }
> - return 0;
> -}
> -EXPORT_SYMBOL(pwm_config);
> -
> -int pwm_enable(struct pwm_device *pwm)
> -{
> - u8 val;
> - int ret;
> -
> - ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
> - if (ret < 0) {
> - pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret);
> - return ret;
> - }
> -
> - /* Change mode to software control */
> - val &= ~PWM_CTRL2_MODE_MASK;
> - val |= PWM_CTRL2_MODE_SW;
> -
> - ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
> - if (ret < 0) {
> - pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret);
> - return ret;
> - }
> -
> - twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
> - return 0;
> -}
> -EXPORT_SYMBOL(pwm_enable);
> -
> -void pwm_disable(struct pwm_device *pwm)
> -{
> - u8 val;
> - int ret;
> -
> - ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
> - if (ret < 0) {
> - pr_err("%s: Failed to disable PWM, Error %d\n",
> - pwm->label, ret);
> - return;
> - }
> -
> - val &= ~PWM_CTRL2_MODE_MASK;
> - val |= PWM_CTRL2_MODE_HW;
> -
> - ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
> - if (ret < 0) {
> - pr_err("%s: Failed to disable PWM, Error %d\n",
> - pwm->label, ret);
> - return;
> - }
> - return;
> -}
> -EXPORT_SYMBOL(pwm_disable);
> -
> -struct pwm_device *pwm_request(int pwm_id, const char *label)
> -{
> - u8 val;
> - int ret;
> - struct pwm_device *pwm;
> -
> - pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
> - if (pwm == NULL) {
> - pr_err("%s: failed to allocate memory\n", label);
> - return NULL;
> - }
> -
> - pwm->label = label;
> - pwm->pwm_id = pwm_id;
> -
> - /* Configure PWM */
> - val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC |
> - PWM_CTRL2_MODE_HW;
> -
> - ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
> -
> - if (ret < 0) {
> - pr_err("%s: Failed to configure PWM, Error %d\n",
> - pwm->label, ret);
> -
> - kfree(pwm);
> - return NULL;
> - }
> -
> - return pwm;
> -}
> -EXPORT_SYMBOL(pwm_request);
> -
> -void pwm_free(struct pwm_device *pwm)
> -{
> - pwm_disable(pwm);
> - kfree(pwm);
> -}
> -EXPORT_SYMBOL(pwm_free);
> -
> -MODULE_LICENSE("GPL");
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index e678005..ed81720 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -142,6 +142,15 @@ config PWM_TIEHRPWM
> To compile this driver as a module, choose M here: the module
> will be called pwm-tiehrpwm.
>
> +config PWM_TWL6030
> + tristate "TWL6030 PWM support"
> + depends on TWL4030_CORE
> + help
> + Generic PWM framework driver for TWL6030.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called pwm-twl6030.
> +
> config PWM_VT8500
> tristate "vt8500 pwm support"
> depends on ARCH_VT8500
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index 29cf57e..acfe482 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -11,4 +11,5 @@ obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
> obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
> obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
> obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
> +obj-$(CONFIG_PWM_TWL6030) += pwm-twl6030.o
> obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o
> diff --git a/drivers/pwm/pwm-twl6030.c b/drivers/pwm/pwm-twl6030.c
> new file mode 100644
> index 0000000..8e63878
> --- /dev/null
> +++ b/drivers/pwm/pwm-twl6030.c
> @@ -0,0 +1,184 @@
> +/*
> + * twl6030_pwm.c
> + * Driver for PHOENIX (TWL6030) Pulse Width Modulator
> + *
> + * Copyright (C) 2010 Texas Instruments
> + * Author: Hemanth V <hemanthv@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/i2c/twl.h>
> +#include <linux/slab.h>
> +
> +#define LED_PWM_CTRL1 0xF4
> +#define LED_PWM_CTRL2 0xF5
> +
> +/* Max value for CTRL1 register */
> +#define PWM_CTRL1_MAX 255
> +
> +/* Pull down disable */
> +#define PWM_CTRL2_DIS_PD (1 << 6)
> +
> +/* Current control 2.5 milli Amps */
> +#define PWM_CTRL2_CURR_02 (2 << 4)
> +
> +/* LED supply source */
> +#define PWM_CTRL2_SRC_VAC (1 << 2)
> +
> +/* LED modes */
> +#define PWM_CTRL2_MODE_HW (0 << 0)
> +#define PWM_CTRL2_MODE_SW (1 << 0)
> +#define PWM_CTRL2_MODE_DIS (2 << 0)
> +
> +#define PWM_CTRL2_MODE_MASK 0x3
> +
> +struct twl6030_pwm_chip {
> + struct pwm_chip chip;
> +};
> +
> +static int twl6030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
> +{
> + int ret;
> + u8 val;
> +
> + /* Configure PWM */
> + val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC |
> + PWM_CTRL2_MODE_HW;
> +
> + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
> + if (ret < 0) {
> + dev_err(chip->dev, "%s: Failed to configure PWM, Error %d\n",
> + pwm->label, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int twl6030_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> + int duty_ns, int period_ns)
> +{
> + u8 duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns;
> + int ret;
> +
> + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1);
> + if (ret < 0) {
> + pr_err("%s: Failed to configure PWM, Error %d\n",
> + pwm->label, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> +{
> + int ret;
> + u8 val;
> +
> + ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
> + if (ret < 0) {
> + dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
> + pwm->label, ret);
> + return ret;
> + }
> +
> + /* Change mode to software control */
> + val &= ~PWM_CTRL2_MODE_MASK;
> + val |= PWM_CTRL2_MODE_SW;
> +
> + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
> + if (ret < 0) {
> + dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
> + pwm->label, ret);
> + return ret;
> + }
> +
> + twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
> + return 0;
> +}
> +
> +static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> +{
> + int ret;
> + u8 val;
> +
> + ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
> + if (ret < 0) {
> + dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
> + pwm->label, ret);
> + return;
> + }
> +
> + val &= ~PWM_CTRL2_MODE_MASK;
> + val |= PWM_CTRL2_MODE_HW;
> +
> + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
> + if (ret < 0) {
> + dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
> + pwm->label, ret);
> + }
> +}
> +
> +static const struct pwm_ops twl6030_pwm_ops = {
> + .request = twl6030_pwm_request,
> + .config = twl6030_pwm_config,
> + .enable = twl6030_pwm_enable,
> + .disable = twl6030_pwm_disable,
> +};
> +
> +static int twl6030_pwm_probe(struct platform_device *pdev)
> +{
> + struct twl6030_pwm_chip *twl6030;
> + int ret;
> +
> + twl6030 = devm_kzalloc(&pdev->dev, sizeof(*twl6030), GFP_KERNEL);
> + if (!twl6030)
> + return -ENOMEM;
> +
> + twl6030->chip.dev = &pdev->dev;
> + twl6030->chip.ops = &twl6030_pwm_ops;
> + twl6030->chip.base = -1;
> + twl6030->chip.npwm = 1;
> +
> + ret = pwmchip_add(&twl6030->chip);
> + if (ret < 0)
> + return ret;
> +
> + platform_set_drvdata(pdev, twl6030);
> +
> + return 0;
> +}
> +
> +static int twl6030_pwm_remove(struct platform_device *pdev)
> +{
> + struct twl6030_pwm_chip *twl6030 = platform_get_drvdata(pdev);
> +
> + return pwmchip_remove(&twl6030->chip);
> +}
> +
> +static struct platform_driver twl6030_pwm_driver = {
> + .driver = {
> + .name = "twl6030-pwm",
> + },
> + .probe = twl6030_pwm_probe,
> + .remove = __devexit_p(twl6030_pwm_remove),
> +};
> +module_platform_driver(twl6030_pwm_driver);
> +
> +MODULE_ALIAS("platform:twl6030-pwm");
> +MODULE_LICENSE("GPL");
>
--
Péter
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] pwm: Move TWL6030 PWM driver to PWM framework
2012-09-03 8:15 ` Peter Ujfalusi
@ 2012-09-07 13:17 ` Thierry Reding
0 siblings, 0 replies; 11+ messages in thread
From: Thierry Reding @ 2012-09-07 13:17 UTC (permalink / raw)
To: Peter Ujfalusi
Cc: Samuel Ortiz, NeilBrown, Benoit Cousson, Felipe Balbi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 745 bytes --]
On Mon, Sep 03, 2012 at 11:15:27AM +0300, Peter Ujfalusi wrote:
> On 09/02/2012 01:40 PM, Thierry Reding wrote:
> > diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
> > index 5fbb2a6..1b1a789 100644
> > --- a/drivers/mfd/twl-core.c
> > +++ b/drivers/mfd/twl-core.c
> > @@ -638,6 +638,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
> > return PTR_ERR(child);
> > }
> >
> > + if (IS_ENABLED(CONFIG_PWM_TWL6030)) {
>
> I think you should also check for the PMIC versions here before adding the child:
> if (IS_ENABLED(CONFIG_PWM_TWL6030) && twl_class_is_6030()) {
>
> To avoid loading the twl6030-pwm driver for twl4030 class.
Yes, that does make sense. I'll add it.
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework
2012-09-03 8:11 ` [PATCH 0/2] mfd: twl: Move " Peter Ujfalusi
@ 2012-09-07 13:19 ` Thierry Reding
2012-09-07 13:52 ` Peter Ujfalusi
0 siblings, 1 reply; 11+ messages in thread
From: Thierry Reding @ 2012-09-07 13:19 UTC (permalink / raw)
To: Peter Ujfalusi
Cc: Samuel Ortiz, NeilBrown, Benoit Cousson, Felipe Balbi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 634 bytes --]
On Mon, Sep 03, 2012 at 11:11:56AM +0300, Peter Ujfalusi wrote:
> Hi,
>
> On 09/02/2012 01:40 PM, Thierry Reding wrote:
> > Hi,
> >
> > This mini series replaces the twl_has_*() macros by the equivalent
> > standard IS_ENABLED() macro and moves the PWM driver to the PWM
> > framework.
> >
> > I'll take the second patch through the PWM tree but would like to have
> > some Acked-bys from people that know and have the hardware and can
> > verify that I haven't broken anything.
>
> All looks good for me but I have one comment for patch 2.
Okay. With that change to patch 2, can I add your Acked-by?
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework
2012-09-07 13:19 ` Thierry Reding
@ 2012-09-07 13:52 ` Peter Ujfalusi
2012-09-18 7:07 ` Thierry Reding
0 siblings, 1 reply; 11+ messages in thread
From: Peter Ujfalusi @ 2012-09-07 13:52 UTC (permalink / raw)
To: Thierry Reding
Cc: Samuel Ortiz, NeilBrown, Benoit Cousson, Felipe Balbi, linux-kernel
On 09/07/2012 04:19 PM, Thierry Reding wrote:
>> All looks good for me but I have one comment for patch 2.
>
> Okay. With that change to patch 2, can I add your Acked-by?
Yes, with that change added:
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework
2012-09-07 13:52 ` Peter Ujfalusi
@ 2012-09-18 7:07 ` Thierry Reding
2012-09-18 7:32 ` Peter Ujfalusi
0 siblings, 1 reply; 11+ messages in thread
From: Thierry Reding @ 2012-09-18 7:07 UTC (permalink / raw)
To: Peter Ujfalusi
Cc: Samuel Ortiz, NeilBrown, Benoit Cousson, Felipe Balbi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 782 bytes --]
On Fri, Sep 07, 2012 at 04:52:05PM +0300, Peter Ujfalusi wrote:
> On 09/07/2012 04:19 PM, Thierry Reding wrote:
> >> All looks good for me but I have one comment for patch 2.
> >
> > Okay. With that change to patch 2, can I add your Acked-by?
>
> Yes, with that change added:
>
> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Peter: does this Acked-by also apply to patch 1?
Do I need Acked-by's from anybody else? I was hoping Samuel would give
his, but there has been no response for over a week. Does anybody know
if he's on vacation or so? I thought I had seen other mails from him,
so maybe he just overlooked this. Before I queue this up for Linus I
wanted to take it through linux-next for a few weeks, but time is
already running short.
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/2] mfd: twl: Replace twl_has_*() macros by IS_ENABLED()
2012-09-02 10:40 ` [PATCH 1/2] mfd: twl: Replace twl_has_*() macros by IS_ENABLED() Thierry Reding
@ 2012-09-18 7:31 ` Peter Ujfalusi
0 siblings, 0 replies; 11+ messages in thread
From: Peter Ujfalusi @ 2012-09-18 7:31 UTC (permalink / raw)
To: Thierry Reding
Cc: Samuel Ortiz, NeilBrown, Benoit Cousson, Felipe Balbi, linux-kernel
On 09/02/2012 01:40 PM, Thierry Reding wrote:
> Instead of reinventing macros for the same purpose, use the standard
> macros.
>
> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework
2012-09-18 7:07 ` Thierry Reding
@ 2012-09-18 7:32 ` Peter Ujfalusi
0 siblings, 0 replies; 11+ messages in thread
From: Peter Ujfalusi @ 2012-09-18 7:32 UTC (permalink / raw)
To: Thierry Reding
Cc: Samuel Ortiz, NeilBrown, Benoit Cousson, Felipe Balbi, linux-kernel
On 09/18/2012 10:07 AM, Thierry Reding wrote:
> Peter: does this Acked-by also apply to patch 1?
Just sent my ack to the first patch.
> Do I need Acked-by's from anybody else? I was hoping Samuel would give
> his, but there has been no response for over a week. Does anybody know
> if he's on vacation or so? I thought I had seen other mails from him,
> so maybe he just overlooked this. Before I queue this up for Linus I
> wanted to take it through linux-next for a few weeks, but time is
> already running short.
Yeah, this reminds me that I also need to ping Samuel for several series
waiting for his ack or to pick them up.
--
Péter
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2012-09-18 7:31 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-09-02 10:40 [PATCH 0/2] mfd: twl: Move PWM driver to PWM framework Thierry Reding
2012-09-02 10:40 ` [PATCH 1/2] mfd: twl: Replace twl_has_*() macros by IS_ENABLED() Thierry Reding
2012-09-18 7:31 ` Peter Ujfalusi
2012-09-02 10:40 ` [PATCH 2/2] pwm: Move TWL6030 PWM driver to PWM framework Thierry Reding
2012-09-03 8:15 ` Peter Ujfalusi
2012-09-07 13:17 ` Thierry Reding
2012-09-03 8:11 ` [PATCH 0/2] mfd: twl: Move " Peter Ujfalusi
2012-09-07 13:19 ` Thierry Reding
2012-09-07 13:52 ` Peter Ujfalusi
2012-09-18 7:07 ` Thierry Reding
2012-09-18 7:32 ` Peter Ujfalusi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).