* ata1: COMRESET failed
@ 2012-10-26 11:56 Jiri Slaby
2012-12-03 11:16 ` Jiri Slaby
0 siblings, 1 reply; 8+ messages in thread
From: Jiri Slaby @ 2012-10-26 11:56 UTC (permalink / raw)
To: jgarzik; +Cc: linux-ide, Linux kernel mailing list
[-- Attachment #1: Type: text/plain, Size: 1020 bytes --]
Hello,
at every boot I'm seeing:
At 5th second:
ata1: link is slow to respond, please be patient (ready=0)
At 10th second:
ata1: COMRESET failed (errno=-16)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
So that I have to wait 10 s for the disk to come up. I tried 3.4.15 and
3.6.3, both with the same result.
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
Any ideas what is going on?
thanks,
--
js
suse labs
[-- Attachment #2: lspci --]
[-- Type: text/plain, Size: 38541 bytes --]
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
00: 86 80 54 01 06 00 90 20 09 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
40: 01 90 d1 fe 00 00 00 00 01 00 d1 fe 00 00 00 00
50: 11 02 00 00 11 00 00 00 07 00 90 df 01 00 00 db
60: 05 00 00 f8 00 00 00 00 01 80 d1 fe 00 00 00 00
70: 00 00 00 fe 00 00 00 00 00 0c 00 fe 7f 00 00 00
80: 10 11 11 11 11 11 11 00 1a 00 00 00 00 00 00 00
90: 01 00 00 00 01 00 00 00 01 00 50 1e 01 00 00 00
a0: 01 00 00 00 01 00 00 00 01 00 60 1e 01 00 00 00
b0: 01 00 a0 db 01 00 80 db 01 00 00 db 01 00 a0 df
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 09 00 0c 01 9b 61 00 e2 d0 00 e8 14 00 00 00 00
f0: 00 00 00 01 00 00 00 00 c8 0f 09 00 00 00 00 00
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00018 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
00: 86 80 66 01 07 04 90 00 09 00 00 03 00 00 00 00
10: 04 00 00 f0 00 00 00 00 0c 00 00 e0 00 00 00 00
20: 01 50 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00
40: 09 00 0c 01 9b 61 00 e2 d0 00 e8 14 00 00 00 00
50: 11 02 00 00 11 00 00 00 00 00 00 00 01 00 a0 db
60: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 05 d0 01 00 18 00 e0 fe 00 00 00 00 00 00 00 00
a0: 00 00 00 00 13 00 06 03 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 a4 22 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 01 00 00 00 00 80 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 09 00 18 50 f5 da
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f2520000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee00338 Data: 0000
Kernel driver in use: xhci_hcd
00: 86 80 31 1e 06 04 90 02 04 30 03 0c 00 00 00 00
10: 04 00 52 f2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00
40: fd 07 0e 80 39 c2 03 80 00 00 00 00 00 00 00 00
50: 17 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00
80: 05 00 87 00 38 03 e0 fe 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 8f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 02 00 04 00 00 00 00 00 00 00 00 00 00 00 00
d0: 0f 00 00 00 0f 00 00 00 0f 00 00 00 0f 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 04 08 00 00 00 00
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f2535000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee003b8 Data: 0000
Kernel driver in use: mei
00: 86 80 3a 1e 06 04 10 00 04 00 80 07 00 00 80 00
10: 04 50 53 f2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
40: 45 02 00 1e 20 00 01 80 06 01 00 69 e0 0f 00 10
50: 01 8c 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 05 00 81 00
90: b8 03 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 c0
c0: 92 40 ac 72 ed 68 05 d5 6d 06 98 b9 a5 3d 03 81
d0: 97 bf 26 f6 42 99 7f fe db 47 62 d0 db f8 9b f5
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:16.3 Serial controller [0700]: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller [8086:1e3d] (rev 04) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 50b0 [size=8]
Region 1: Memory at f253c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00: 86 80 3d 1e 03 00 b0 00 04 02 00 07 00 00 00 00
10: b1 50 00 00 00 c0 53 f2 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 c8 00 00 00 00 00 00 00 07 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 01 d0 23 00 08 00 00 00
d0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Lenovo Device [17aa:21f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f253b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5080 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00378 Data: 0000
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
00: 86 80 02 15 07 04 10 00 04 00 00 02 00 00 00 00
10: 00 00 50 f2 00 b0 53 f2 81 50 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 f3 21
30: 00 00 00 00 c8 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 07
d0: 05 e0 81 00 78 03 e0 fe 00 00 00 00 00 00 00 00
e0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f253a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP+
Kernel driver in use: ehci_hcd
00: 86 80 2d 1e 06 00 90 02 04 20 03 0c 00 00 00 00
10: 00 a0 53 f2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00
60: 20 20 a7 07 00 00 00 00 01 00 00 01 00 00 08 c0
70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 80 00 11 88 0c 93 30 0d 00 24 00 00 00 00
90: 00 00 00 00 00 00 00 00 13 00 06 03 00 01 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 a4 12 80 7f
f0: 00 00 00 00 88 85 80 00 87 0f 04 08 08 17 5b 20
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f2530000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee003f8 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00: 86 80 20 1e 06 04 10 00 04 00 03 04 10 00 00 00
10: 04 00 53 f2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
40: 01 00 00 45 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 70 81 00 f8 03 e0 fe 00 00 00 00 00 00 00 00
70: 10 00 91 00 00 00 00 10 00 00 10 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 04 02 01 02 24 00 40 00 0c a3 82 10 00 33 02
d0: 00 0c a3 02 10 00 33 02 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 04 08 00 00 00 00
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f1d00000-f24fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Device [17aa:21fa]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 10 1e 07 00 10 00 c4 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 40 40 00 00
20: d0 f1 40 f2 41 f0 b1 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 01
50: 42 00 11 70 60 b2 04 00 08 00 40 00 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 0d a0 00 00 aa 17 fa 21 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 3f 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 04 08 00 00 00 00
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f1c00000-f1cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Device [17aa:21fa]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 12 1e 07 00 10 00 c4 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
20: c0 f1 c0 f1 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 00 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 02
50: 42 00 11 70 00 b2 0c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 0d a0 00 00 aa 17 fa 21 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 00 80 11 81 00 00 00 00
e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 04 08 00 00 00 00
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1400000-f1bfffff
Prefetchable memory behind bridge: 00000000f0c00000-00000000f13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Device [17aa:21fa]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 14 1e 07 00 10 00 c4 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 04 0b 00 30 30 00 00
20: 40 f1 b0 f1 c1 f0 31 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 07 03 00 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 4c 12 03
50: 03 00 01 10 60 b2 14 00 08 00 00 00 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 0d a0 00 00 aa 17 fa 21 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 04 08 00 00 00 00
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2539000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00: 86 80 26 1e 06 00 90 02 04 20 03 0c 00 00 00 00
10: 00 90 53 f2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00
60: 20 20 47 06 00 00 00 00 01 00 00 01 00 00 08 c0
70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 80 00 11 88 0c 93 30 0d 00 24 00 00 00 00
90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 0a 64 20 00 02 38 ca 14 04 30 c0 36
f0: 00 00 00 00 88 85 80 00 87 0f 04 08 08 17 5b 20
00:1f.0 ISA bridge [0601]: Intel Corporation QM77 Express Chipset LPC Controller [8086:1e55] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00: 86 80 55 1e 07 00 10 02 04 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
40: 01 04 00 00 80 00 00 00 01 05 00 00 10 00 00 00
50: f8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 8b 8a 87 87 90 00 00 00 8b 8a 8a 8b f8 f0 00 00
70: 78 f0 78 f0 78 f0 78 f0 78 f0 78 f0 78 f0 78 f0
80: 10 00 0f 3f 01 16 7c 00 e1 15 0c 00 00 00 00 00
90: a1 06 0c 00 00 0f 00 00 00 00 00 00 00 00 00 00
a0: 14 0e a0 00 39 29 06 00 00 47 00 00 00 00 00 80
b0: 00 00 00 00 00 00 00 00 08 00 02 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 0f 00 00 00 67 45 00 00 c0 ff 00 00 08 00 00 00
e0: 09 00 0c 10 00 00 00 00 b3 02 e4 06 00 00 00 00
f0: 01 c0 d1 fe 00 00 00 00 87 0f 04 08 00 00 00 00
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 50a8 [size=8]
Region 1: I/O ports at 50bc [size=4]
Region 2: I/O ports at 50a0 [size=8]
Region 3: I/O ports at 50b8 [size=4]
Region 4: I/O ports at 5060 [size=32]
Region 5: Memory at f2538000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00: 86 80 03 1e 07 04 b0 02 04 01 06 01 00 00 00 00
10: a9 50 00 00 bd 50 00 00 a1 50 00 00 b9 50 00 00
20: 61 50 00 00 00 80 53 f2 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 02 00 00
40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
80: 05 70 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 60 2c 13 81 83 01 00 2c 08 42 5c 01 00 00 00 00
a0: e0 00 00 00 39 00 00 00 12 b0 10 00 48 00 00 00
b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 04 08 00 00 00 00
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f2534000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
00: 86 80 22 1e 03 00 80 02 04 00 05 0c 00 00 00 00
10: 04 40 53 f2 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ef 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 00 00 00 00 00 00 00 00 07 03 00 00
40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 03 04 04 00 00 00 08 08 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 04 08 00 00 00 00
02:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 07) (prog-if 01)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1d00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [800 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: sdhci-pci
00: 80 11 22 e8 06 00 10 00 07 01 80 08 10 00 00 00
10: 00 00 d0 f1 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 60 61 82 01 00 00 00 00 00 00 00 00
50: 05 78 80 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 11 78 00 00 00 00 00 00
70: 01 00 00 00 00 00 00 00 01 80 03 fe 00 40 00 48
80: 10 00 01 00 c0 ff 90 05 10 28 09 00 11 ec 07 01
90: 42 01 11 10 00 00 00 00 c0 03 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
b0: 04 00 00 00 00 00 00 00 00 00 00 00 a0 00 00 00
c0: 00 30 00 00 00 01 00 05 00 00 00 87 00 98 00 00
d0: 00 00 00 00 20 40 00 00 33 00 00 00 20 00 11 d9
e0: b2 32 e8 21 73 80 00 00 40 00 00 00 00 00 00 00
f0: 30 00 fe 00 00 00 00 00 18 00 00 02 00 00 02 00
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00398 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 60-67-20-ff-ff-81-4a-dc
Kernel driver in use: iwlwifi
00: 86 80 85 00 06 00 10 00 34 00 80 02 10 00 00 00
10: 04 00 c0 f1 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 11 13
30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 01 d0 23 c8 00 00 00 0d
d0: 05 e0 81 00 98 03 e0 fe 00 00 00 00 00 00 00 00
e0: 10 00 01 00 c0 8e 00 10 10 08 19 00 11 ec 06 00
f0: 42 01 11 10 00 00 00 00 00 00 00 00 00 00 00 00
[-- Attachment #3: dmesg --]
[-- Type: text/plain, Size: 44860 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.15-2-desktop (geeko@buildhost) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Thu Oct 25 19:43:32 UTC 2012 (11dd65d)
[ 0.000000] Command line: root=UUID=e7b4ee26-6ea3-4db2-8250-e66a8a5542e3 reboot=w commit=60 resume=/dev/sda2 ipv6.disable=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000d0680000 (usable)
[ 0.000000] BIOS-e820: 00000000d0680000 - 00000000dae9f000 (reserved)
[ 0.000000] BIOS-e820: 00000000dae9f000 - 00000000daf9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000daf9f000 - 00000000dafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dafff000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011e600000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: LENOVO 23252SG/23252SG, BIOS G2ET33WW (1.13 ) 07/24/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask FE0000000 write-back
[ 0.000000] 7 base 11F000000 mask FFF000000 uncachable
[ 0.000000] 8 base 11E800000 mask FFF800000 uncachable
[ 0.000000] 9 base 11E600000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] x2apic enabled by BIOS, switching to x2apic ops
[ 0.000000] last_pfn = 0xd0680 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f0100] f0100
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000d0680000
[ 0.000000] 0000000000 - 00d0600000 page 2M
[ 0.000000] 00d0600000 - 00d0680000 page 4k
[ 0.000000] kernel direct mapping tables up to d0680000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011e600000
[ 0.000000] 0100000000 - 011e600000 page 2M
[ 0.000000] kernel direct mapping tables up to 11e600000 @ d067a000-d0680000
[ 0.000000] RAMDISK: 7f435000 - 7fff3000
[ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000daffe170 000BC (v01 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: FACP 00000000dafe5000 000F4 (v04 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000dafe8000 102C8 (v01 LENOVO TP-G2 00001130 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf5a000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-G2 00001130 PTL 00000001)
[ 0.000000] ACPI: TCPA 00000000daffc000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000daffb000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffa000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daff9000 007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000dafe4000 00038 (v01 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafe3000 00098 (v01 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafe2000 0003C (v01 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000dafe1000 00052 (v01 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: FPDT 00000000dafe0000 00054 (v01 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000dafe7000 000A5 (v32 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 00000000dafdd000 00055 (v03 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafdc000 00C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafdb000 00A7E (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 00000000dafda000 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafd9000 002A6 (v01 LENOVO TP-G2 00001130 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011e600000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011e600000
[ 0.000000] NODE_DATA [000000011e5ec000 - 000000011e5fffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880119e00000-ffff88011d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011e600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000d0680
[ 0.000000] 0: 0x00100000 -> 0x0011e600
[ 0.000000] On node 0 totalpages: 977420
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 834743 pages, LIFO batch:31
[ 0.000000] Normal zone: 1701 pages used for memmap
[ 0.000000] Normal zone: 122715 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000d0680000 - 00000000dae9f000
[ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000
[ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[ 0.000000] PM: Registered nosave memory: 00000000dafff000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011e200000 s80256 r8192 d22144 u262144
[ 0.000000] pcpu-alloc: s80256 r8192 d22144 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 961378
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=e7b4ee26-6ea3-4db2-8250-e66a8a5542e3 reboot=w commit=60 resume=/dev/sda2 ipv6.disable=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3759244k/4691968k available (5731k kernel code, 782288k absent, 150436k reserved, 5203k data, 944k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16252928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.001000] Fast TSC calibration using PIT
[ 0.002000] Detected 2594.001 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.00 BogoMIPS (lpj=2594001)
[ 0.000151] pid_max: default: 32768 minimum: 301
[ 0.000247] Security Framework initialized
[ 0.000332] AppArmor: AppArmor initialized
[ 0.000603] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001541] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002007] Mount-cache hash table entries: 256
[ 0.002200] Initializing cgroup subsys cpuacct
[ 0.002275] Initializing cgroup subsys memory
[ 0.002356] Initializing cgroup subsys devices
[ 0.002432] Initializing cgroup subsys freezer
[ 0.002506] Initializing cgroup subsys net_cls
[ 0.002578] Initializing cgroup subsys blkio
[ 0.002654] Initializing cgroup subsys perf_event
[ 0.002746] CPU: Physical Processor ID: 0
[ 0.002822] CPU: Processor Core ID: 0
[ 0.003193] mce: CPU supports 7 MCE banks
[ 0.003275] CPU0: Thermal LVT vector (0xfa) already installed
[ 0.003280] using mwait in idle threads.
[ 0.004042] ACPI: Core revision 20120320
[ 0.010035] DMAR: Host address width 36
[ 0.010131] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.010229] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.010372] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.010470] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.010612] DMAR: RMRR base: 0x000000da2f0000 end: 0x000000da306fff
[ 0.010708] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.010881] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.010977] HPET id 0 under DRHD base 0xfed91000
[ 0.011245] Enabled IRQ remapping in x2apic mode
[ 0.011790] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.023060] CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz stepping 09
[ 0.124628] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.124897] ... version: 3
[ 0.124990] ... bit width: 48
[ 0.125082] ... generic registers: 4
[ 0.125176] ... value mask: 0000ffffffffffff
[ 0.125272] ... max period: 000000007fffffff
[ 0.125368] ... fixed-purpose events: 3
[ 0.125461] ... event mask: 000000070000000f
[ 0.132764] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.138619] Booting Node 0, Processors #1
[ 0.150034] CPU1: Thermal LVT vector (0xfa) already installed
[ 0.152144] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.155591] #2
[ 0.166958] CPU2: Thermal LVT vector (0xfa) already installed
[ 0.169066] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.172557] #3
[ 0.183918] CPU3: Thermal LVT vector (0xfa) already installed
[ 0.186025] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.186236] Brought up 4 CPUs
[ 0.186330] Total of 4 processors activated (20752.00 BogoMIPS).
[ 0.188943] devtmpfs: initialized
[ 0.189716] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.189931] RTC time: 13:44:53, date: 10/26/12
[ 0.190059] NET: Registered protocol family 16
[ 0.190287] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.190432] ACPI: bus type pci registered
[ 0.190689] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.190836] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.198609] PCI: Using configuration type 1 for base access
[ 0.199296] bio: create slab <bio-0> at 0
[ 0.199456] ACPI: Added _OSI(Module Device)
[ 0.199555] ACPI: Added _OSI(Processor Device)
[ 0.199647] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.199742] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.201132] ACPI: EC: EC description table is found, configuring boot EC
[ 0.205054] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.207557] ACPI: SSDT 00000000dae3a018 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.208139] ACPI: Dynamic OEM Table Load:
[ 0.208318] ACPI: SSDT (null) 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.208778] ACPI: SSDT 00000000dae3ba98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.209393] ACPI: Dynamic OEM Table Load:
[ 0.209578] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.209906] ACPI: SSDT 00000000dae39d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.210480] ACPI: Dynamic OEM Table Load:
[ 0.210659] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.211439] ACPI: Interpreter enabled
[ 0.211540] ACPI: (supports S0 S3 S4 S5)
[ 0.211821] ACPI: Using IOAPIC for interrupt routing
[ 0.214073] ACPI: Power Resource [PUBS] (on)
[ 0.216876] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.218083] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.218184] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.218394] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.218512] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.218614] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.218710] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.218852] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfebfffff]
[ 0.218994] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff]
[ 0.219155] PCI host bridge to bus 0000:00
[ 0.219250] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.219347] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.219447] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.219545] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
[ 0.219642] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.219745] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.219778] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.219786] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.219790] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.219794] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
[ 0.219840] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.219860] pci 0000:00:14.0: reg 10: [mem 0xf2520000-0xf252ffff 64bit]
[ 0.219926] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.219948] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.219969] pci 0000:00:16.0: reg 10: [mem 0xf2535000-0xf253500f 64bit]
[ 0.220041] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.220063] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 0.220080] pci 0000:00:16.3: reg 10: [io 0x50b0-0x50b7]
[ 0.220089] pci 0000:00:16.3: reg 14: [mem 0xf253c000-0xf253cfff]
[ 0.220181] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.220197] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
[ 0.220206] pci 0000:00:19.0: reg 14: [mem 0xf253b000-0xf253bfff]
[ 0.220214] pci 0000:00:19.0: reg 18: [io 0x5080-0x509f]
[ 0.220271] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.220297] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.220316] pci 0000:00:1a.0: reg 10: [mem 0xf253a000-0xf253a3ff]
[ 0.220401] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.220426] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.220442] pci 0000:00:1b.0: reg 10: [mem 0xf2530000-0xf2533fff 64bit]
[ 0.220504] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.220530] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.220661] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.220699] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.220829] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.220867] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.220995] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.221037] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.221056] pci 0000:00:1d.0: reg 10: [mem 0xf2539000-0xf25393ff]
[ 0.221140] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.221164] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.221281] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.221297] pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af]
[ 0.221305] pci 0000:00:1f.2: reg 14: [io 0x50bc-0x50bf]
[ 0.221311] pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7]
[ 0.221319] pci 0000:00:1f.2: reg 1c: [io 0x50b8-0x50bb]
[ 0.221326] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
[ 0.221333] pci 0000:00:1f.2: reg 24: [mem 0xf2538000-0xf25387ff]
[ 0.221374] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.221391] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.221405] pci 0000:00:1f.3: reg 10: [mem 0xf2534000-0xf25340ff 64bit]
[ 0.221424] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.221731] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[ 0.221757] pci 0000:02:00.0: reg 10: [mem 0xf1d00000-0xf1d000ff]
[ 0.221957] pci 0000:02:00.0: supports D1 D2
[ 0.221959] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.223662] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.223761] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.223766] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.223774] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.224000] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.224165] pci 0000:03:00.0: reg 10: [mem 0xf1c00000-0xf1c01fff 64bit]
[ 0.224887] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.226561] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.226664] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.226742] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.226841] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.226845] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.226853] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.226878] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.226951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.226977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.226997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.227085] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.227277] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.227425] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.229348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.230040] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.230725] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.231415] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.232097] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.232781] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.233474] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.234153] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.234848] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.234996] vgaarb: loaded
[ 0.235087] vgaarb: bridge control possible 0000:00:02.0
[ 0.235259] SCSI subsystem initialized
[ 0.235380] libata version 3.00 loaded.
[ 0.235407] usbcore: registered new interface driver usbfs
[ 0.235511] usbcore: registered new interface driver hub
[ 0.235619] usbcore: registered new device driver usb
[ 0.235748] PCI: Using ACPI for IRQ routing
[ 0.237460] PCI: pci_cache_line_size set to 64 bytes
[ 0.237898] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.237899] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 0.237901] reserve RAM buffer: 00000000d0680000 - 00000000d3ffffff
[ 0.237902] reserve RAM buffer: 000000011e600000 - 000000011fffffff
[ 0.237961] NetLabel: Initializing
[ 0.238056] NetLabel: domain hash size = 128
[ 0.238150] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.238250] NetLabel: unlabeled traffic allowed by default
[ 0.238365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.238836] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.240940] Switching to clocksource hpet
[ 0.242490] AppArmor: AppArmor Filesystem Enabled
[ 0.242602] pnp: PnP ACPI init
[ 0.242699] ACPI: bus type pnp registered
[ 0.243137] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.243138] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.243139] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.243140] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.243142] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.243143] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.243144] pnp 00:00: [mem 0x000d4000-0x000d7fff]
[ 0.243145] pnp 00:00: [mem 0x000d8000-0x000dbfff]
[ 0.243146] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.243147] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.243148] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.243149] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.243150] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.243151] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.243153] pnp 00:00: [mem 0x00100000-0xdf9fffff]
[ 0.243154] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.243155] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.243188] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.243289] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.243386] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.243484] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.243580] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.243677] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.243774] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.243872] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.243970] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.244075] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.244175] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.244273] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.244370] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.244468] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.244565] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.244664] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.244762] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.244860] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.244875] pnp 00:01: [bus 00-3f]
[ 0.244877] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.244878] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.244879] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.244880] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.244881] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.244883] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.244884] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.244885] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.244886] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.244887] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.244889] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.244891] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.244892] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.244893] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.244894] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.244895] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.244896] pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
[ 0.244898] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.244931] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.244981] pnp 00:02: [io 0x0010-0x001f]
[ 0.244983] pnp 00:02: [io 0x0090-0x009f]
[ 0.244984] pnp 00:02: [io 0x0024-0x0025]
[ 0.244985] pnp 00:02: [io 0x0028-0x0029]
[ 0.244986] pnp 00:02: [io 0x002c-0x002d]
[ 0.244987] pnp 00:02: [io 0x0030-0x0031]
[ 0.244988] pnp 00:02: [io 0x0034-0x0035]
[ 0.244989] pnp 00:02: [io 0x0038-0x0039]
[ 0.244990] pnp 00:02: [io 0x003c-0x003d]
[ 0.244991] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.244992] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.244993] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.244994] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.244995] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.244996] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.244997] pnp 00:02: [io 0x0050-0x0053]
[ 0.244998] pnp 00:02: [io 0x0072-0x0077]
[ 0.244999] pnp 00:02: [io 0x0400-0x047f]
[ 0.245000] pnp 00:02: [io 0x0500-0x057f]
[ 0.245001] pnp 00:02: [io 0x0800-0x080f]
[ 0.245002] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.245003] pnp 00:02: [io 0x1600-0x167f]
[ 0.245004] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[ 0.245006] pnp 00:02: [mem 0xfffff000-0xffffffff]
[ 0.245007] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.245008] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.245009] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.245010] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.245011] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.245044] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.245150] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.245246] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.245343] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.245441] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.245537] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.245634] system 00:02: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.245732] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.245829] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.245927] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.246024] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.246127] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.246226] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.246260] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.246278] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.246285] pnp 00:04: [io 0x0000-0x000f]
[ 0.246286] pnp 00:04: [io 0x0080-0x008f]
[ 0.246287] pnp 00:04: [io 0x00c0-0x00df]
[ 0.246289] pnp 00:04: [dma 4]
[ 0.246302] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.246308] pnp 00:05: [io 0x0061]
[ 0.246322] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.246328] pnp 00:06: [io 0x00f0]
[ 0.246341] pnp 00:06: [irq 13]
[ 0.246356] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.246361] pnp 00:07: [io 0x0070-0x0071]
[ 0.246370] pnp 00:07: [irq 8]
[ 0.246385] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.246391] pnp 00:08: [io 0x0060]
[ 0.246392] pnp 00:08: [io 0x0064]
[ 0.246400] pnp 00:08: [irq 1]
[ 0.246415] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.246428] pnp 00:09: [irq 12]
[ 0.246443] pnp 00:09: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.246471] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.246488] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.246894] pnp: PnP ACPI: found 11 devices
[ 0.246991] ACPI: ACPI bus type pnp unregistered
[ 0.253326] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.253426] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.253527] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.253628] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.253777] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.253876] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.253982] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.254084] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.254186] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.254286] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.254465] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.254466] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.254468] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.254469] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.254470] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.254472] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.254473] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
[ 0.254474] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.254476] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[ 0.254477] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.254478] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.254479] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.254546] NET: Registered protocol family 2
[ 0.254727] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.255384] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.256991] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.257289] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.257388] TCP: reno registered
[ 0.257486] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.257599] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.257800] NET: Registered protocol family 1
[ 0.257904] pci 0000:00:02.0: Boot video device
[ 0.257916] pci 0000:00:14.0: power state changed by ACPI to D0
[ 0.258017] pci 0000:00:14.0: power state changed by ACPI to D0
[ 0.258190] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.258287] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.258422] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.258519] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.258824] PCI: CLS 64 bytes, default 64
[ 0.258853] Unpacking initramfs...
[ 0.396931] Freeing initrd memory: 12024k freed
[ 0.399468] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.399574] Placing 64MB software IO TLB between ffff8800cc67a000 - ffff8800d067a000
[ 0.399716] software IO TLB at phys 0xcc67a000 - 0xd067a000
[ 0.400320] audit: initializing netlink socket (disabled)
[ 0.400428] type=2000 audit(1351259093.293:1): initialized
[ 0.413476] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.414032] VFS: Disk quotas dquot_6.5.2
[ 0.414150] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.414500] msgmni has been set to 7365
[ 0.414737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.414934] io scheduler noop registered
[ 0.415027] io scheduler deadline registered
[ 0.415139] io scheduler cfq registered (default)
[ 0.415542] intel_idle: does not run on family 6 model 58
[ 0.415561] GHES: HEST is not enabled!
[ 0.415685] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.436467] 0000:00:16.3: ttyS4 at I/O 0x50b0 (irq = 19) is a 16550A
[ 0.436735] Non-volatile memory driver v1.3
[ 0.436831] Linux agpgart interface v0.103
[ 0.436970] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 0.437151] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.438102] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.438293] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.438466] ahci 0000:00:1f.2: version 3.0
[ 0.438517] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.438539] ahci: SSS flag set, parallel bus scan disabled
[ 0.448712] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[ 0.448870] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.449016] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.452973] scsi0 : ahci
[ 0.453135] scsi1 : ahci
[ 0.453267] scsi2 : ahci
[ 0.453400] scsi3 : ahci
[ 0.453535] scsi4 : ahci
[ 0.453679] scsi5 : ahci
[ 0.454371] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 42
[ 0.454513] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 42
[ 0.454653] ata3: DUMMY
[ 0.454751] ata4: DUMMY
[ 0.454841] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 42
[ 0.454983] ata6: DUMMY
[ 0.455106] Fixed MDIO Bus: probed
[ 0.455274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.455381] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 0.455479] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 0.455591] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.455594] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.455710] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.455872] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.459841] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.459851] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf253a000
[ 0.465659] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.465787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.465885] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.466027] usb usb1: Product: EHCI Host Controller
[ 0.466121] usb usb1: Manufacturer: Linux 3.4.15-2-desktop ehci_hcd
[ 0.466217] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.466377] hub 1-0:1.0: USB hub found
[ 0.466474] hub 1-0:1.0: 3 ports detected
[ 0.466609] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.466715] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.466825] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.466827] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.466925] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.467085] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.471049] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.471058] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2539000
[ 0.476637] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.476760] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.476859] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.476999] usb usb2: Product: EHCI Host Controller
[ 0.477094] usb usb2: Manufacturer: Linux 3.4.15-2-desktop ehci_hcd
[ 0.477191] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.477337] hub 2-0:1.0: USB hub found
[ 0.477433] hub 2-0:1.0: 3 ports detected
[ 0.477560] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.477671] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.477803] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.479532] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.479637] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.479808] mousedev: PS/2 mouse device common for all mice
[ 0.479967] rtc_cmos 00:07: RTC can wake from S4
[ 0.480183] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.480311] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.480412] cpuidle: using governor ladder
[ 0.480504] cpuidle: using governor menu
[ 0.480597] EFI Variables Facility v0.08 2004-May-17
[ 0.480795] usbcore: registered new interface driver usbhid
[ 0.480892] usbhid: USB HID core driver
[ 0.481086] TCP: cubic registered
[ 0.481181] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.481327] lib80211: common routines for IEEE802.11 drivers
[ 0.481424] lib80211_crypt: registered algorithm 'NULL'
[ 0.481426] Registering the dns_resolver key type
[ 0.481673] PM: Checking hibernation image partition /dev/sda2
[ 0.482342] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.767101] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 0.881199] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.881316] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.881607] hub 1-1:1.0: USB hub found
[ 0.881820] hub 1-1:1.0: 6 ports detected
[ 0.984677] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.098786] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.098900] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.099193] hub 2-1:1.0: USB hub found
[ 1.099411] hub 2-1:1.0: 8 ports detected
[ 1.173405] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[ 1.235561] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800
[ 1.235726] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.259361] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
[ 1.259475] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.259610] usb 1-1.3: Product: Biometric Coprocessor
[ 1.259700] usb 1-1.3: Manufacturer: Auth
[ 1.270054] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 1.333102] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
[ 1.399903] Refined TSC clocksource calibration: 2594.115 MHz.
[ 1.400017] Switching to clocksource tsc
[ 1.421302] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[ 1.421417] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.421553] usb 1-1.4: Product: BCM20702A0
[ 1.421648] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.421736] usb 1-1.4: SerialNumber: 083E8EE1B689
[ 1.494790] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
[ 1.586991] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
[ 1.587106] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.587241] usb 1-1.6: Product: Integrated Camera
[ 1.587332] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 5.798635] ata1: link is slow to respond, please be patient (ready=0)
[ 6.071518] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 6.261069] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input2
[ 10.481848] ata1: COMRESET failed (errno=-16)
[ 10.786279] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.786710] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 10.786715] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 10.787088] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 10.787210] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 10.787643] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 10.787648] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 10.788019] ata1.00: configured for UDMA/133
[ 10.788287] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 10.788529] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 10.788719] sd 0:0:0:0: [sda] Write Protect is off
[ 10.788815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.788829] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.789460] sda: sda1 sda2 sda3
[ 10.789763] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.094699] ata2: SATA link down (SStatus 0 SControl 300)
[ 11.401123] ata5: SATA link down (SStatus 0 SControl 300)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ata1: COMRESET failed
2012-10-26 11:56 ata1: COMRESET failed Jiri Slaby
@ 2012-12-03 11:16 ` Jiri Slaby
2012-12-03 11:57 ` Borislav Petkov
0 siblings, 1 reply; 8+ messages in thread
From: Jiri Slaby @ 2012-12-03 11:16 UTC (permalink / raw)
Cc: jgarzik, linux-ide, Linux kernel mailing list, Tejun Heo
On 10/26/2012 01:56 PM, Jiri Slaby wrote:
> Hello,
>
> at every boot I'm seeing:
>
> At 5th second:
> ata1: link is slow to respond, please be patient (ready=0)
>
> At 10th second:
> ata1: COMRESET failed (errno=-16)
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
> ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> ata1.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
>
>
> So that I have to wait 5 s for the disk to come up. I tried 3.4.15 and
> 3.6.3, both with the same result.
>
> 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
> Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
>
> Any ideas what is going on?
Anybody? I also tried 3.0, it's there too. And libahci.skip_host_reset=1
works around the issue.
> thanks,
--
js
suse labs
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ata1: COMRESET failed
2012-12-03 11:16 ` Jiri Slaby
@ 2012-12-03 11:57 ` Borislav Petkov
2013-01-07 17:24 ` Borislav Petkov
0 siblings, 1 reply; 8+ messages in thread
From: Borislav Petkov @ 2012-12-03 11:57 UTC (permalink / raw)
To: Jiri Slaby
Cc: jgarzik, linux-ide, Linux kernel mailing list, Tejun Heo, Alan Cox
On Mon, Dec 03, 2012 at 12:16:44PM +0100, Jiri Slaby wrote:
> On 10/26/2012 01:56 PM, Jiri Slaby wrote:
> > Hello,
> >
> > at every boot I'm seeing:
> >
> > At 5th second:
> > ata1: link is slow to respond, please be patient (ready=0)
> >
> > At 10th second:
> > ata1: COMRESET failed (errno=-16)
> > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
> > ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
> > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > ata1.00: configured for UDMA/133
> > scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
> >
> >
> > So that I have to wait 5 s for the disk to come up. I tried 3.4.15 and
> > 3.6.3, both with the same result.
> >
> > 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
> > Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
> >
> > Any ideas what is going on?
>
> Anybody? I also tried 3.0, it's there too. And libahci.skip_host_reset=1
> works around the issue.
FWIW, I had the same issue on an AMD chipset at the old job. It needs to
reset SATA link for some reason, probably BIOS programs it wrongly...
+ Alan.
--
Regards/Gruss,
Boris.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ata1: COMRESET failed
2012-12-03 11:57 ` Borislav Petkov
@ 2013-01-07 17:24 ` Borislav Petkov
2013-01-08 1:31 ` Aaron Lu
0 siblings, 1 reply; 8+ messages in thread
From: Borislav Petkov @ 2013-01-07 17:24 UTC (permalink / raw)
To: Aaron Lu, Shane Huang
Cc: Jiri Slaby, jgarzik, linux-ide, Linux kernel mailing list,
Tejun Heo, Alan Cox
Adding some more people.
Aaron, Shane, do you guys have any ideas? I've been seeing something
similar on an AMD desktop box recently and Jiri sees it on a laptop with
an SSD.
Here's Jiri's original mail with more info: http://lkml.org/lkml/2012/10/26/208
Thanks.
On Mon, Dec 03, 2012 at 12:57:34PM +0100, Borislav Petkov wrote:
> On Mon, Dec 03, 2012 at 12:16:44PM +0100, Jiri Slaby wrote:
> > On 10/26/2012 01:56 PM, Jiri Slaby wrote:
> > > Hello,
> > >
> > > at every boot I'm seeing:
> > >
> > > At 5th second:
> > > ata1: link is slow to respond, please be patient (ready=0)
> > >
> > > At 10th second:
> > > ata1: COMRESET failed (errno=-16)
> > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > > ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
> > > ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
> > > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > > ata1.00: configured for UDMA/133
> > > scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
> > >
> > >
> > > So that I have to wait 5 s for the disk to come up. I tried 3.4.15 and
> > > 3.6.3, both with the same result.
> > >
> > > 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
> > > Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
> > >
> > > Any ideas what is going on?
> >
> > Anybody? I also tried 3.0, it's there too. And libahci.skip_host_reset=1
> > works around the issue.
>
> FWIW, I had the same issue on an AMD chipset at the old job. It needs to
> reset SATA link for some reason, probably BIOS programs it wrongly...
>
> + Alan.
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ata1: COMRESET failed
2013-01-07 17:24 ` Borislav Petkov
@ 2013-01-08 1:31 ` Aaron Lu
2013-01-08 11:46 ` Jiri Slaby
0 siblings, 1 reply; 8+ messages in thread
From: Aaron Lu @ 2013-01-08 1:31 UTC (permalink / raw)
To: Borislav Petkov, Jiri Slaby
Cc: Shane Huang, Jeff Garzik, linux-ide, Linux kernel mailing list,
Tejun Heo, Alan Cox
On 01/08/2013 01:24 AM, Borislav Petkov wrote:
> Adding some more people.
>
> Aaron, Shane, do you guys have any ideas? I've been seeing something
> similar on an AMD desktop box recently and Jiri sees it on a laptop with
> an SSD.
I've seen a similar problem on a bug report recently for a Crucial SSD,
and upgrading the disk's firmware fixed the problem:
https://bugzilla.kernel.org/show_bug.cgi?id=49701
If the controller has problem, it should have problems for all kinds of
disks attached to it. So possible to test with other disks, Jiri?
Hope this helps.
-Aaron
>
> Here's Jiri's original mail with more info: http://lkml.org/lkml/2012/10/26/208
>
> Thanks.
>
> On Mon, Dec 03, 2012 at 12:57:34PM +0100, Borislav Petkov wrote:
>> On Mon, Dec 03, 2012 at 12:16:44PM +0100, Jiri Slaby wrote:
>>> On 10/26/2012 01:56 PM, Jiri Slaby wrote:
>>>> Hello,
>>>>
>>>> at every boot I'm seeing:
>>>>
>>>> At 5th second:
>>>> ata1: link is slow to respond, please be patient (ready=0)
>>>>
>>>> At 10th second:
>>>> ata1: COMRESET failed (errno=-16)
>>>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>>>> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>>>> ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
>>>> ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>>>> ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>>>> ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>>>> ata1.00: configured for UDMA/133
>>>> scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
>>>>
>>>>
>>>> So that I have to wait 5 s for the disk to come up. I tried 3.4.15 and
>>>> 3.6.3, both with the same result.
>>>>
>>>> 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
>>>> Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
>>>>
>>>> Any ideas what is going on?
>>>
>>> Anybody? I also tried 3.0, it's there too. And libahci.skip_host_reset=1
>>> works around the issue.
>>
>> FWIW, I had the same issue on an AMD chipset at the old job. It needs to
>> reset SATA link for some reason, probably BIOS programs it wrongly...
>>
>> + Alan.
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ata1: COMRESET failed
2013-01-08 1:31 ` Aaron Lu
@ 2013-01-08 11:46 ` Jiri Slaby
2013-01-08 19:57 ` Jiri Slaby
0 siblings, 1 reply; 8+ messages in thread
From: Jiri Slaby @ 2013-01-08 11:46 UTC (permalink / raw)
To: Aaron Lu
Cc: Borislav Petkov, Shane Huang, Jeff Garzik, linux-ide,
Linux kernel mailing list, Tejun Heo, Alan Cox
On 01/08/2013 02:31 AM, Aaron Lu wrote:
> On 01/08/2013 01:24 AM, Borislav Petkov wrote:
>> Adding some more people.
>>
>> Aaron, Shane, do you guys have any ideas? I've been seeing something
>> similar on an AMD desktop box recently and Jiri sees it on a laptop with
>> an SSD.
>
> I've seen a similar problem on a bug report recently for a Crucial SSD,
> and upgrading the disk's firmware fixed the problem:
> https://bugzilla.kernel.org/show_bug.cgi?id=49701
>
> If the controller has problem, it should have problems for all kinds of
> disks attached to it. So possible to test with other disks, Jiri?
Yes, I tested a normal spinning disk and it does not happen with that.
This happens only with this Intel SSD: SSDSA2M080G2GC
So I will try to investigate how to upgrade the firmware and will report.
thakns,
--
js
suse labs
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ata1: COMRESET failed
2013-01-08 11:46 ` Jiri Slaby
@ 2013-01-08 19:57 ` Jiri Slaby
2013-01-08 20:08 ` Borislav Petkov
0 siblings, 1 reply; 8+ messages in thread
From: Jiri Slaby @ 2013-01-08 19:57 UTC (permalink / raw)
To: Aaron Lu
Cc: Borislav Petkov, Shane Huang, Jeff Garzik, linux-ide,
Linux kernel mailing list, Tejun Heo, Alan Cox
On 01/08/2013 12:46 PM, Jiri Slaby wrote:
> On 01/08/2013 02:31 AM, Aaron Lu wrote:
>> On 01/08/2013 01:24 AM, Borislav Petkov wrote:
>>> Adding some more people.
>>>
>>> Aaron, Shane, do you guys have any ideas? I've been seeing something
>>> similar on an AMD desktop box recently and Jiri sees it on a laptop with
>>> an SSD.
>>
>> I've seen a similar problem on a bug report recently for a Crucial SSD,
>> and upgrading the disk's firmware fixed the problem:
>> https://bugzilla.kernel.org/show_bug.cgi?id=49701
>>
>> If the controller has problem, it should have problems for all kinds of
>> disks attached to it. So possible to test with other disks, Jiri?
>
> Yes, I tested a normal spinning disk and it does not happen with that.
> This happens only with this Intel SSD: SSDSA2M080G2GC
>
> So I will try to investigate how to upgrade the firmware and will report.
Yes, updating the firmware from 2CV102HD to 2CV102M3 indeed helped...
Thanks for the tip.
--
js
suse labs
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: ata1: COMRESET failed
2013-01-08 19:57 ` Jiri Slaby
@ 2013-01-08 20:08 ` Borislav Petkov
0 siblings, 0 replies; 8+ messages in thread
From: Borislav Petkov @ 2013-01-08 20:08 UTC (permalink / raw)
To: Jiri Slaby, Aaron Lu
Cc: Shane Huang, Jeff Garzik, linux-ide, Linux kernel mailing list,
Tejun Heo, Alan Cox
On Tue, Jan 08, 2013 at 08:57:29PM +0100, Jiri Slaby wrote:
> Yes, updating the firmware from 2CV102HD to 2CV102M3 indeed helped...
> Thanks for the tip.
That's cool, so that's the second case where updating the drive's fw
helps, good to know for the future.
Aaron, thanks for helping with this.
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-01-08 20:08 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-26 11:56 ata1: COMRESET failed Jiri Slaby
2012-12-03 11:16 ` Jiri Slaby
2012-12-03 11:57 ` Borislav Petkov
2013-01-07 17:24 ` Borislav Petkov
2013-01-08 1:31 ` Aaron Lu
2013-01-08 11:46 ` Jiri Slaby
2013-01-08 19:57 ` Jiri Slaby
2013-01-08 20:08 ` Borislav Petkov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).