* Re: [PATCH 4/4] ARM: tegra: Set SCU base address dynamically from DT
2012-12-17 14:00 ` Rob Herring
@ 2012-12-17 22:14 ` Stephen Warren
2012-12-18 9:21 ` Hiroshi Doyu
2013-01-14 10:43 ` Hiroshi Doyu
2 siblings, 0 replies; 13+ messages in thread
From: Stephen Warren @ 2012-12-17 22:14 UTC (permalink / raw)
To: Rob Herring
Cc: Hiroshi Doyu, linux-arm-kernel, Russell King, devicetree-discuss,
linux-doc, linux-kernel, Rob Herring, Grant Likely, Rob Landley,
linux-tegra
On 12/17/2012 07:00 AM, Rob Herring wrote:
> On 12/17/2012 12:18 AM, Hiroshi Doyu wrote:
>> Set Snoop Control Unit(SCU) register base address dynamically from DT.
>> diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
>> static void __init tegra_smp_init_cpus(void)
>> {
>> - unsigned int i, ncores = scu_get_core_count(scu_base);
>> + struct device_node *np;
>> + unsigned int i, ncores = 1;
>> +
>> + np = of_find_matching_node(NULL, cortex_a9_scu_match);
>> + if (!np)
>> + return;
>> + scu_base = of_iomap(np, 0);
>
> Did you actually test this? Unless something changed, ioremap does not
> work this early. The only reason to have it mapped this early is to get
> the core count, but that doesn't work on A15 or A7. So we really need to
> get core count/mask in a standard way. At least some work to get core
> count from DT went into 3.8.
Does it work if the machine's .map_io() function has set up a static
mapping that includes the specified region? I believe that is the case
on Tegra. What is the alternative if the registers can't be mapped;
should the code count the number of child nodes in /cpus?
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 4/4] ARM: tegra: Set SCU base address dynamically from DT
2012-12-17 14:00 ` Rob Herring
2012-12-17 22:14 ` Stephen Warren
@ 2012-12-18 9:21 ` Hiroshi Doyu
2012-12-18 13:46 ` Rob Herring
2013-01-14 10:43 ` Hiroshi Doyu
2 siblings, 1 reply; 13+ messages in thread
From: Hiroshi Doyu @ 2012-12-18 9:21 UTC (permalink / raw)
To: robherring2
Cc: linux-arm-kernel, linux, swarren, devicetree-discuss, linux-doc,
linux-kernel, rob.herring, grant.likely, rob, linux-tegra
Hi Rob,
Rob Herring <robherring2@gmail.com> wrote @ Mon, 17 Dec 2012 15:00:46 +0100:
> On 12/17/2012 12:18 AM, Hiroshi Doyu wrote:
> > Set Snoop Control Unit(SCU) register base address dynamically from DT.
> >
> > Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
> > ---
> > arch/arm/mach-tegra/platsmp.c | 23 ++++++++++++++++++++---
> > 1 file changed, 20 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
> > index 1b926df..45c0b79 100644
> > --- a/arch/arm/mach-tegra/platsmp.c
> > +++ b/arch/arm/mach-tegra/platsmp.c
> > @@ -18,6 +18,8 @@
> > #include <linux/jiffies.h>
> > #include <linux/smp.h>
> > #include <linux/io.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> >
> > #include <asm/cacheflush.h>
> > #include <asm/hardware/gic.h>
> > @@ -36,7 +38,7 @@
> >
> > extern void tegra_secondary_startup(void);
> >
> > -static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
> > +static void __iomem *scu_base;
> >
> > #define EVP_CPU_RESET_VECTOR \
> > (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
> > @@ -143,14 +145,28 @@ done:
> > return status;
> > }
> >
> > +static const struct of_device_id cortex_a9_scu_match[] __initconst = {
> > + { .compatible = "arm,cortex-a9-scu", },
> > + {}
> > +};
> > +
> > /*
> > * Initialise the CPU possible map early - this describes the CPUs
> > * which may be present or become present in the system.
> > */
> > static void __init tegra_smp_init_cpus(void)
> > {
> > - unsigned int i, ncores = scu_get_core_count(scu_base);
> > + struct device_node *np;
> > + unsigned int i, ncores = 1;
> > +
> > + np = of_find_matching_node(NULL, cortex_a9_scu_match);
> > + if (!np)
> > + return;
> > + scu_base = of_iomap(np, 0);
>
> Did you actually test this? Unless something changed, ioremap does not
> work this early. The only reason to have it mapped this early is to get
> the core count, but that doesn't work on A15 or A7. So we really need to
> get core count/mask in a standard way. At least some work to get core
> count from DT went into 3.8.
>
> BTW, you can get the scu address on the A9 by reading cp15 register:
>
> /* Get SCU base */
> asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
>
> It's still probably good to have the DT node, but the reg property can
> be optional in this case.
I'm simply wondering, if the above cp15 works with Cortex-A9, do we
still need SCU DT node? At least from Cortex-A15 TRM, it seems that
SCU is tighly integrated into CPU core and it doesn't have any user
control. So Cortex-A15 doesn't seem to need to configure SCU. For
Cortex-A7, I haven't yet found S/W configurable register definitions
in TRM. So if neither of A15/A7 need SCU base, would the above cp15
intructions be enough?
> We need to move away from having the DT matching code within the
> platforms. This should all be moved to the scu code in a scu_of_init
> function that could be called from common code.
True if SCU DT node is still necessary.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 4/4] ARM: tegra: Set SCU base address dynamically from DT
2012-12-18 9:21 ` Hiroshi Doyu
@ 2012-12-18 13:46 ` Rob Herring
2012-12-18 15:15 ` Hiroshi Doyu
0 siblings, 1 reply; 13+ messages in thread
From: Rob Herring @ 2012-12-18 13:46 UTC (permalink / raw)
To: Hiroshi Doyu
Cc: linux-arm-kernel, linux, swarren, devicetree-discuss, linux-doc,
linux-kernel, rob.herring, grant.likely, rob, linux-tegra
On 12/18/2012 03:21 AM, Hiroshi Doyu wrote:
> Hi Rob,
>
> Rob Herring <robherring2@gmail.com> wrote @ Mon, 17 Dec 2012 15:00:46 +0100:
>
>> On 12/17/2012 12:18 AM, Hiroshi Doyu wrote:
>>> Set Snoop Control Unit(SCU) register base address dynamically from DT.
>>>
>>> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
>>> ---
>>> arch/arm/mach-tegra/platsmp.c | 23 ++++++++++++++++++++---
>>> 1 file changed, 20 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
>>> index 1b926df..45c0b79 100644
>>> --- a/arch/arm/mach-tegra/platsmp.c
>>> +++ b/arch/arm/mach-tegra/platsmp.c
>>> @@ -18,6 +18,8 @@
>>> #include <linux/jiffies.h>
>>> #include <linux/smp.h>
>>> #include <linux/io.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_address.h>
>>>
>>> #include <asm/cacheflush.h>
>>> #include <asm/hardware/gic.h>
>>> @@ -36,7 +38,7 @@
>>>
>>> extern void tegra_secondary_startup(void);
>>>
>>> -static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
>>> +static void __iomem *scu_base;
>>>
>>> #define EVP_CPU_RESET_VECTOR \
>>> (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
>>> @@ -143,14 +145,28 @@ done:
>>> return status;
>>> }
>>>
>>> +static const struct of_device_id cortex_a9_scu_match[] __initconst = {
>>> + { .compatible = "arm,cortex-a9-scu", },
>>> + {}
>>> +};
>>> +
>>> /*
>>> * Initialise the CPU possible map early - this describes the CPUs
>>> * which may be present or become present in the system.
>>> */
>>> static void __init tegra_smp_init_cpus(void)
>>> {
>>> - unsigned int i, ncores = scu_get_core_count(scu_base);
>>> + struct device_node *np;
>>> + unsigned int i, ncores = 1;
>>> +
>>> + np = of_find_matching_node(NULL, cortex_a9_scu_match);
>>> + if (!np)
>>> + return;
>>> + scu_base = of_iomap(np, 0);
>>
>> Did you actually test this? Unless something changed, ioremap does not
>> work this early. The only reason to have it mapped this early is to get
>> the core count, but that doesn't work on A15 or A7. So we really need to
>> get core count/mask in a standard way. At least some work to get core
>> count from DT went into 3.8.
>>
>> BTW, you can get the scu address on the A9 by reading cp15 register:
>>
>> /* Get SCU base */
>> asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
>>
>> It's still probably good to have the DT node, but the reg property can
>> be optional in this case.
>
> I'm simply wondering, if the above cp15 works with Cortex-A9, do we
> still need SCU DT node? At least from Cortex-A15 TRM, it seems that
> SCU is tighly integrated into CPU core and it doesn't have any user
> control. So Cortex-A15 doesn't seem to need to configure SCU. For
> Cortex-A7, I haven't yet found S/W configurable register definitions
> in TRM. So if neither of A15/A7 need SCU base, would the above cp15
> intructions be enough?
The A15/A7 still have the register for the other peripherals like the
GIC, but there are no SCU registers or other way to get a core count
from the h/w.
The DT node could be used to determine if you have an SCU or not. I just
used the cpu node compatible value to determine that.
>> We need to move away from having the DT matching code within the
>> platforms. This should all be moved to the scu code in a scu_of_init
>> function that could be called from common code.
>
> True if SCU DT node is still necessary.
Well, reading the cp15 register and mapping the registers could be
common code independent of DT. I'm not sure if there are non-A9
implementations of the SCU which don't have the cp15 register.
Rob
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 4/4] ARM: tegra: Set SCU base address dynamically from DT
2012-12-18 13:46 ` Rob Herring
@ 2012-12-18 15:15 ` Hiroshi Doyu
2012-12-18 15:32 ` Hiroshi Doyu
0 siblings, 1 reply; 13+ messages in thread
From: Hiroshi Doyu @ 2012-12-18 15:15 UTC (permalink / raw)
To: robherring2
Cc: linux-arm-kernel, linux, swarren, devicetree-discuss, linux-doc,
linux-kernel, rob.herring, grant.likely, rob, linux-tegra
Rob Herring <robherring2@gmail.com> wrote @ Tue, 18 Dec 2012 14:46:36 +0100:
> On 12/18/2012 03:21 AM, Hiroshi Doyu wrote:
> > Hi Rob,
> >
> > Rob Herring <robherring2@gmail.com> wrote @ Mon, 17 Dec 2012 15:00:46 +0100:
> >
> >> On 12/17/2012 12:18 AM, Hiroshi Doyu wrote:
> >>> Set Snoop Control Unit(SCU) register base address dynamically from DT.
> >>>
> >>> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
> >>> ---
> >>> arch/arm/mach-tegra/platsmp.c | 23 ++++++++++++++++++++---
> >>> 1 file changed, 20 insertions(+), 3 deletions(-)
> >>>
> >>> diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
> >>> index 1b926df..45c0b79 100644
> >>> --- a/arch/arm/mach-tegra/platsmp.c
> >>> +++ b/arch/arm/mach-tegra/platsmp.c
> >>> @@ -18,6 +18,8 @@
> >>> #include <linux/jiffies.h>
> >>> #include <linux/smp.h>
> >>> #include <linux/io.h>
> >>> +#include <linux/of.h>
> >>> +#include <linux/of_address.h>
> >>>
> >>> #include <asm/cacheflush.h>
> >>> #include <asm/hardware/gic.h>
> >>> @@ -36,7 +38,7 @@
> >>>
> >>> extern void tegra_secondary_startup(void);
> >>>
> >>> -static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
> >>> +static void __iomem *scu_base;
> >>>
> >>> #define EVP_CPU_RESET_VECTOR \
> >>> (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
> >>> @@ -143,14 +145,28 @@ done:
> >>> return status;
> >>> }
> >>>
> >>> +static const struct of_device_id cortex_a9_scu_match[] __initconst = {
> >>> + { .compatible = "arm,cortex-a9-scu", },
> >>> + {}
> >>> +};
> >>> +
> >>> /*
> >>> * Initialise the CPU possible map early - this describes the CPUs
> >>> * which may be present or become present in the system.
> >>> */
> >>> static void __init tegra_smp_init_cpus(void)
> >>> {
> >>> - unsigned int i, ncores = scu_get_core_count(scu_base);
> >>> + struct device_node *np;
> >>> + unsigned int i, ncores = 1;
> >>> +
> >>> + np = of_find_matching_node(NULL, cortex_a9_scu_match);
> >>> + if (!np)
> >>> + return;
> >>> + scu_base = of_iomap(np, 0);
> >>
> >> Did you actually test this? Unless something changed, ioremap does not
> >> work this early. The only reason to have it mapped this early is to get
> >> the core count, but that doesn't work on A15 or A7. So we really need to
> >> get core count/mask in a standard way. At least some work to get core
> >> count from DT went into 3.8.
> >>
> >> BTW, you can get the scu address on the A9 by reading cp15 register:
> >>
> >> /* Get SCU base */
> >> asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
> >>
> >> It's still probably good to have the DT node, but the reg property can
> >> be optional in this case.
> >
> > I'm simply wondering, if the above cp15 works with Cortex-A9, do we
> > still need SCU DT node? At least from Cortex-A15 TRM, it seems that
> > SCU is tighly integrated into CPU core and it doesn't have any user
> > control. So Cortex-A15 doesn't seem to need to configure SCU. For
> > Cortex-A7, I haven't yet found S/W configurable register definitions
> > in TRM. So if neither of A15/A7 need SCU base, would the above cp15
> > intructions be enough?
>
> The A15/A7 still have the register for the other peripherals like the
> GIC, but there are no SCU registers or other way to get a core count
> from the h/w.
>
> The DT node could be used to determine if you have an SCU or not. I just
> used the cpu node compatible value to determine that.
Taking a look at A15 TRM again, it seems that A15 can get number of
processors via(*1):
asm("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
At least, A15 is ok without SCU/DT to get the number of processors. I
haven't found the above instruction in A7, but is there any way to get
the number of core in A7?
If both A15/A7 can get # of CPU cores via coprocessor instruction,
what others should we take care of with DT node?
*1: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0438e/BABBACEE.html
> >> We need to move away from having the DT matching code within the
> >> platforms. This should all be moved to the scu code in a scu_of_init
> >> function that could be called from common code.
> >
> > True if SCU DT node is still necessary.
>
> Well, reading the cp15 register and mapping the registers could be
> common code independent of DT. I'm not sure if there are non-A9
> implementations of the SCU which don't have the cp15 register.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 4/4] ARM: tegra: Set SCU base address dynamically from DT
2012-12-18 15:15 ` Hiroshi Doyu
@ 2012-12-18 15:32 ` Hiroshi Doyu
0 siblings, 0 replies; 13+ messages in thread
From: Hiroshi Doyu @ 2012-12-18 15:32 UTC (permalink / raw)
To: robherring2
Cc: linux-arm-kernel, linux, swarren, devicetree-discuss, linux-doc,
linux-kernel, rob.herring, grant.likely, rob, linux-tegra
Hiroshi Doyu <hdoyu@nvidia.com> wrote @ Tue, 18 Dec 2012 17:15:46 +0200 (EET):
> Rob Herring <robherring2@gmail.com> wrote @ Tue, 18 Dec 2012 14:46:36 +0100:
>
> > On 12/18/2012 03:21 AM, Hiroshi Doyu wrote:
> > > Hi Rob,
> > >
> > > Rob Herring <robherring2@gmail.com> wrote @ Mon, 17 Dec 2012 15:00:46 +0100:
> > >
> > >> On 12/17/2012 12:18 AM, Hiroshi Doyu wrote:
> > >>> Set Snoop Control Unit(SCU) register base address dynamically from DT.
> > >>>
> > >>> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
> > >>> ---
> > >>> arch/arm/mach-tegra/platsmp.c | 23 ++++++++++++++++++++---
> > >>> 1 file changed, 20 insertions(+), 3 deletions(-)
> > >>>
> > >>> diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
> > >>> index 1b926df..45c0b79 100644
> > >>> --- a/arch/arm/mach-tegra/platsmp.c
> > >>> +++ b/arch/arm/mach-tegra/platsmp.c
> > >>> @@ -18,6 +18,8 @@
> > >>> #include <linux/jiffies.h>
> > >>> #include <linux/smp.h>
> > >>> #include <linux/io.h>
> > >>> +#include <linux/of.h>
> > >>> +#include <linux/of_address.h>
> > >>>
> > >>> #include <asm/cacheflush.h>
> > >>> #include <asm/hardware/gic.h>
> > >>> @@ -36,7 +38,7 @@
> > >>>
> > >>> extern void tegra_secondary_startup(void);
> > >>>
> > >>> -static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
> > >>> +static void __iomem *scu_base;
> > >>>
> > >>> #define EVP_CPU_RESET_VECTOR \
> > >>> (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
> > >>> @@ -143,14 +145,28 @@ done:
> > >>> return status;
> > >>> }
> > >>>
> > >>> +static const struct of_device_id cortex_a9_scu_match[] __initconst = {
> > >>> + { .compatible = "arm,cortex-a9-scu", },
> > >>> + {}
> > >>> +};
> > >>> +
> > >>> /*
> > >>> * Initialise the CPU possible map early - this describes the CPUs
> > >>> * which may be present or become present in the system.
> > >>> */
> > >>> static void __init tegra_smp_init_cpus(void)
> > >>> {
> > >>> - unsigned int i, ncores = scu_get_core_count(scu_base);
> > >>> + struct device_node *np;
> > >>> + unsigned int i, ncores = 1;
> > >>> +
> > >>> + np = of_find_matching_node(NULL, cortex_a9_scu_match);
> > >>> + if (!np)
> > >>> + return;
> > >>> + scu_base = of_iomap(np, 0);
> > >>
> > >> Did you actually test this? Unless something changed, ioremap does not
> > >> work this early. The only reason to have it mapped this early is to get
> > >> the core count, but that doesn't work on A15 or A7. So we really need to
> > >> get core count/mask in a standard way. At least some work to get core
> > >> count from DT went into 3.8.
> > >>
> > >> BTW, you can get the scu address on the A9 by reading cp15 register:
> > >>
> > >> /* Get SCU base */
> > >> asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
> > >>
> > >> It's still probably good to have the DT node, but the reg property can
> > >> be optional in this case.
> > >
> > > I'm simply wondering, if the above cp15 works with Cortex-A9, do we
> > > still need SCU DT node? At least from Cortex-A15 TRM, it seems that
> > > SCU is tighly integrated into CPU core and it doesn't have any user
> > > control. So Cortex-A15 doesn't seem to need to configure SCU. For
> > > Cortex-A7, I haven't yet found S/W configurable register definitions
> > > in TRM. So if neither of A15/A7 need SCU base, would the above cp15
> > > intructions be enough?
> >
> > The A15/A7 still have the register for the other peripherals like the
> > GIC, but there are no SCU registers or other way to get a core count
> > from the h/w.
> >
> > The DT node could be used to determine if you have an SCU or not. I just
> > used the cpu node compatible value to determine that.
>
> Taking a look at A15 TRM again, it seems that A15 can get number of
> processors via(*1):
>
> asm("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
>
> At least, A15 is ok without SCU/DT to get the number of processors. I
> haven't found the above instruction in A7, but is there any way to get
> the number of core in A7?
L2CTLR can be used to detect # of cores for A7 as well:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0464e/BABBACEE.html
> If both A15/A7 can get # of CPU cores via coprocessor instruction,
> what others should we take care of with DT node?
>
> *1: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0438e/BABBACEE.html
>
> > >> We need to move away from having the DT matching code within the
> > >> platforms. This should all be moved to the scu code in a scu_of_init
> > >> function that could be called from common code.
> > >
> > > True if SCU DT node is still necessary.
> >
> > Well, reading the cp15 register and mapping the registers could be
> > common code independent of DT. I'm not sure if there are non-A9
> > implementations of the SCU which don't have the cp15 register.
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 4/4] ARM: tegra: Set SCU base address dynamically from DT
2012-12-17 14:00 ` Rob Herring
2012-12-17 22:14 ` Stephen Warren
2012-12-18 9:21 ` Hiroshi Doyu
@ 2013-01-14 10:43 ` Hiroshi Doyu
2 siblings, 0 replies; 13+ messages in thread
From: Hiroshi Doyu @ 2013-01-14 10:43 UTC (permalink / raw)
To: robherring2
Cc: linux-arm-kernel, linux, swarren, devicetree-discuss, linux-doc,
linux-kernel, rob.herring, grant.likely, rob, linux-tegra
Rob Herring <robherring2@gmail.com> wrote @ Mon, 17 Dec 2012 15:00:46 +0100:
> On 12/17/2012 12:18 AM, Hiroshi Doyu wrote:
> > Set Snoop Control Unit(SCU) register base address dynamically from DT.
> >
> > Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
> > ---
> > arch/arm/mach-tegra/platsmp.c | 23 ++++++++++++++++++++---
> > 1 file changed, 20 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
> > index 1b926df..45c0b79 100644
> > --- a/arch/arm/mach-tegra/platsmp.c
> > +++ b/arch/arm/mach-tegra/platsmp.c
> > @@ -18,6 +18,8 @@
> > #include <linux/jiffies.h>
> > #include <linux/smp.h>
> > #include <linux/io.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> >
> > #include <asm/cacheflush.h>
> > #include <asm/hardware/gic.h>
> > @@ -36,7 +38,7 @@
> >
> > extern void tegra_secondary_startup(void);
> >
> > -static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
> > +static void __iomem *scu_base;
> >
> > #define EVP_CPU_RESET_VECTOR \
> > (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
> > @@ -143,14 +145,28 @@ done:
> > return status;
> > }
> >
> > +static const struct of_device_id cortex_a9_scu_match[] __initconst = {
> > + { .compatible = "arm,cortex-a9-scu", },
> > + {}
> > +};
> > +
> > /*
> > * Initialise the CPU possible map early - this describes the CPUs
> > * which may be present or become present in the system.
> > */
> > static void __init tegra_smp_init_cpus(void)
> > {
> > - unsigned int i, ncores = scu_get_core_count(scu_base);
> > + struct device_node *np;
> > + unsigned int i, ncores = 1;
> > +
> > + np = of_find_matching_node(NULL, cortex_a9_scu_match);
> > + if (!np)
> > + return;
> > + scu_base = of_iomap(np, 0);
>
> Did you actually test this? Unless something changed, ioremap does not
> work this early. The only reason to have it mapped this early is to get
> the core count, but that doesn't work on A15 or A7. So we really need to
> get core count/mask in a standard way. At least some work to get core
> count from DT went into 3.8.
>
> BTW, you can get the scu address on the A9 by reading cp15 register:
>
> /* Get SCU base */
> asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
>
> It's still probably good to have the DT node, but the reg property can
> be optional in this case.
>
> We need to move away from having the DT matching code within the
> platforms. This should all be moved to the scu code in a scu_of_init
> function that could be called from common code.
If we can get SCU base address from CP15, do we still need SCU entry
in DT? If not, the following would be the only API to get SCU base?
>From 9bbecb50759f39d9c762977145407ea4f8a4d5ac Mon Sep 17 00:00:00 2001
From: Hiroshi Doyu <hdoyu@nvidia.com>
Date: Mon, 14 Jan 2013 12:35:33 +0200
Subject: [PATCH 1/1] ARM: Add API to detect SCU base address from CP15
Add API to detect SCU base address from CP15.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
---
arch/arm/include/asm/smp_scu.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
index 4eb6d00..6015ede 100644
--- a/arch/arm/include/asm/smp_scu.h
+++ b/arch/arm/include/asm/smp_scu.h
@@ -6,6 +6,20 @@
#define SCU_PM_POWEROFF 3
#ifndef __ASSEMBLER__
+static inline phys_addr_t scu_get_base(void)
+{
+ phys_addr_t pa;
+ unsigned long part_number = read_cpuid_part_number();
+
+ switch (part_number) {
+ case ARM_CPU_PART_CORTEX_A9:
+ /* Get SCU physical base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (pa));
+ return pa;
+ default:
+ return 0;
+ }
+}
unsigned int scu_get_core_count(void __iomem *);
void scu_enable(void __iomem *);
int scu_power_mode(void __iomem *, unsigned int);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 13+ messages in thread