* [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree
@ 2013-02-11 15:44 Roger Quadros
2013-02-11 15:44 ` [PATCH 2/2] ARM: dts: omap4-panda: Add clock alias for USB PHY Roger Quadros
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Roger Quadros @ 2013-02-11 15:44 UTC (permalink / raw)
To: tony
Cc: b-cousson, balbi, rogerq, linux-omap, linux-arm-kernel,
linux-kernel, devicetree-discuss, Russell King, Rajendra Nayak,
Santosh Shilimkar
Currently on OMAP, it is not possible to specify a clock consumer
to any of the OMAP generated clocks using the device tree. This can pose
a problem for external devices that run off an OMAP clock as we
can't reliably provide a reference to the clock in the device tree.
This patch allows device trees to provide a node that contains the
clock identifier, clock alias and the device phandle. The board
initialization code then creates a clock alias to this clock id,
and associates it with the device whose phandle was supplied.
Discussion
http://www.spinics.net/lists/linux-omap/msg86241.html
CC: Russell King <linux@arm.linux.org.uk>
CC: Rajendra Nayak <rnayak@ti.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
.../devicetree/bindings/clock/ti-clock-alias.txt | 26 ++++++++
arch/arm/mach-omap2/board-generic.c | 67 ++++++++++++++++++++
2 files changed, 93 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/ti-clock-alias.txt
diff --git a/Documentation/devicetree/bindings/clock/ti-clock-alias.txt b/Documentation/devicetree/bindings/clock/ti-clock-alias.txt
new file mode 100644
index 0000000..87ef4c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti-clock-alias.txt
@@ -0,0 +1,26 @@
+* Clock alias provision for TI OMAP2+ boards
+
+This binding allows the board's device tree file to specify a clock name,
+device phandle and clock alias so that that clock can be associated
+to the device with the alias.
+
+This is required in cases where an external device is clocked by an
+OMAP generated clock and needs to be assocated to it.
+
+NOTE: The node's name should be clock_alias
+
+Required properties
+- clock-name: The clock identifier string. Should be one of the
+ clock ids defined in OMAP common clock data.
+- clock-alias: A string specifying the alias that must be created to the clock.
+- device: A phandle to the device this clock should be associated to.
+
+e.g. On the OMAP4 Panda board, the USB PHY device is clocked by the
+FREF_CLK3 (auxclk3_ck) from the OMAP. The PHY driver expexts the clock to
+be named "main_clk". This binding can be provided like so
+
+clock_alias {
+ clock-name = "auxclk3_ck";
+ clock-alias = "main_clk";
+ device = <&hsusb1_phy>;
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 53cb380b..a4b8813 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,6 +15,9 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
+#include <linux/clk.h>
+#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
@@ -36,12 +39,76 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
{ }
};
+static int __init omap_create_clk_alias(struct device_node *np)
+{
+ int ret = 0;
+ const char *s, *alias;
+ char *clk_id;
+ struct device_node *dev_np;
+ struct platform_device *pdev;
+
+ of_property_read_string(np, "clock-name", &s);
+ if (!s) {
+ pr_err("%s: couldn't find clock-name property in node %s\n",
+ __func__, np->name);
+ return -ENODEV;
+ }
+
+ clk_id = kstrdup(s, GFP_KERNEL);
+ if (!clk_id)
+ return -ENOMEM;
+
+ dev_np = of_parse_phandle(np, "device", 0);
+ if (!dev_np) {
+ pr_err("%s: couldn't find device phandle for \'%s\'\n",
+ __func__, clk_id);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ pdev = of_find_device_by_node(dev_np);
+ if (!pdev) {
+ pr_err("%s: couldn't find device for clock \'%s\'\n",
+ __func__, clk_id);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ ret = of_property_read_string(np, "clock-alias", &alias);
+ if (ret) {
+ pr_err("%s: couldn't find alias for clock \'%s\'\n",
+ __func__, clk_id);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ ret = clk_add_alias(alias, dev_name(&pdev->dev), clk_id, NULL);
+ if (ret) {
+ pr_err("%s: couldn't add alias \'%s\' to clock \'%s\'\n",
+ __func__, alias, clk_id);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+exit:
+ kfree(clk_id);
+ return ret;
+}
+
static void __init omap_generic_init(void)
{
+ struct device_node *np;
+
omap_sdrc_init(NULL, NULL);
of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
+ /* create clock aliases based on 'clock_alias' nodes */
+ for_each_node_by_name(np, "clock_alias") {
+ omap_create_clk_alias(np);
+ of_node_put(np);
+ }
+
/*
* HACK: call display setup code for selected boards to enable omapdss.
* This will be removed when omapdss supports DT.
--
1.7.4.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: dts: omap4-panda: Add clock alias for USB PHY
2013-02-11 15:44 [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree Roger Quadros
@ 2013-02-11 15:44 ` Roger Quadros
2013-02-11 15:49 ` [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree Felipe Balbi
2013-02-11 16:07 ` Sascha Hauer
2 siblings, 0 replies; 5+ messages in thread
From: Roger Quadros @ 2013-02-11 15:44 UTC (permalink / raw)
To: tony
Cc: b-cousson, balbi, rogerq, linux-omap, linux-arm-kernel,
linux-kernel, devicetree-discuss, Russell King, Rajendra Nayak,
Santosh Shilimkar
On Panda, the USB Host PHY is clocked by FREF3_CLK (auxclk3_ck) pin
of the OMAP. Provide this information in the device tree.
CC: Russell King <linux@arm.linux.org.uk>
CC: Rajendra Nayak <rnayak@ti.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap4-panda.dts | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index d6e59c7..a7d66cc 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -86,6 +86,13 @@
reset-supply = <&hsusb1_reset>;
vcc-supply = <&hsusb1_power>;
};
+
+ /* hsusb1_phy is clocked by FREF_CLK3 i.e. auxclk3 */
+ clock_alias {
+ clock-name = "auxclk3_ck";
+ clock-alias = "main_clk";
+ device = <&hsusb1_phy>;
+ };
};
&omap4_pmx_core {
--
1.7.4.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree
2013-02-11 15:44 [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree Roger Quadros
2013-02-11 15:44 ` [PATCH 2/2] ARM: dts: omap4-panda: Add clock alias for USB PHY Roger Quadros
@ 2013-02-11 15:49 ` Felipe Balbi
2013-02-11 16:07 ` Sascha Hauer
2 siblings, 0 replies; 5+ messages in thread
From: Felipe Balbi @ 2013-02-11 15:49 UTC (permalink / raw)
To: Roger Quadros
Cc: tony, b-cousson, balbi, linux-omap, linux-arm-kernel,
linux-kernel, devicetree-discuss, Russell King, Rajendra Nayak,
Santosh Shilimkar
[-- Attachment #1: Type: text/plain, Size: 375 bytes --]
Hi,
On Mon, Feb 11, 2013 at 05:44:23PM +0200, Roger Quadros wrote:
> @@ -36,12 +39,76 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
> { }
> };
>
> +static int __init omap_create_clk_alias(struct device_node *np)
if the rest of the folks agree with the aproach, looks like most of this
can be made a bit more generic ;-)
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree
2013-02-11 15:44 [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree Roger Quadros
2013-02-11 15:44 ` [PATCH 2/2] ARM: dts: omap4-panda: Add clock alias for USB PHY Roger Quadros
2013-02-11 15:49 ` [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree Felipe Balbi
@ 2013-02-11 16:07 ` Sascha Hauer
2013-02-12 7:47 ` Roger Quadros
2 siblings, 1 reply; 5+ messages in thread
From: Sascha Hauer @ 2013-02-11 16:07 UTC (permalink / raw)
To: Roger Quadros
Cc: tony, Russell King, devicetree-discuss, linux-kernel, balbi,
Santosh Shilimkar, linux-omap, linux-arm-kernel
On Mon, Feb 11, 2013 at 05:44:23PM +0200, Roger Quadros wrote:
> Currently on OMAP, it is not possible to specify a clock consumer
> to any of the OMAP generated clocks using the device tree. This can pose
> a problem for external devices that run off an OMAP clock as we
> can't reliably provide a reference to the clock in the device tree.
There is an established way of providing clocks in the devicetree using
the clocks/clock-names properties. Wouldn't it be better using this
for OMAP aswell?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree
2013-02-11 16:07 ` Sascha Hauer
@ 2013-02-12 7:47 ` Roger Quadros
0 siblings, 0 replies; 5+ messages in thread
From: Roger Quadros @ 2013-02-12 7:47 UTC (permalink / raw)
To: Sascha Hauer, Santosh Shilimkar, Rajendra Nayak
Cc: tony, Russell King, devicetree-discuss, linux-kernel, balbi,
linux-omap, linux-arm-kernel
On 02/11/2013 06:07 PM, Sascha Hauer wrote:
> On Mon, Feb 11, 2013 at 05:44:23PM +0200, Roger Quadros wrote:
>> Currently on OMAP, it is not possible to specify a clock consumer
>> to any of the OMAP generated clocks using the device tree. This can pose
>> a problem for external devices that run off an OMAP clock as we
>> can't reliably provide a reference to the clock in the device tree.
>
> There is an established way of providing clocks in the devicetree using
> the clocks/clock-names properties. Wouldn't it be better using this
> for OMAP aswell?
>
I agree with you, but I'm not sure when this migration will be done.
Rajendra/Santosh might know better.
regards,
-roger
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-02-12 7:48 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-11 15:44 [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree Roger Quadros
2013-02-11 15:44 ` [PATCH 2/2] ARM: dts: omap4-panda: Add clock alias for USB PHY Roger Quadros
2013-02-11 15:49 ` [PATCH 1/2] ARM: OMAP2+: Allow clock alias provision from device tree Felipe Balbi
2013-02-11 16:07 ` Sascha Hauer
2013-02-12 7:47 ` Roger Quadros
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).