* [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi
@ 2013-04-08 12:57 Eric Bénard
2013-04-08 12:57 ` [PATCH 2/3] ARM: mx28: add auart3 " Eric Bénard
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Eric Bénard @ 2013-04-08 12:57 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: shawn.guo, linux-kernel, kernel
Add auart2 2 pins configuration on its main pads
Signed-off-by: Eric Bénard <eric@eukrea.com>
---
arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 7ba4966..13799cf 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -308,6 +308,17 @@
fsl,pull-up = <0>;
};
+ auart2_2pins_b: auart2-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
+ 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
auart3_pins_a: auart3@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.11.7
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/3] ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi
2013-04-08 12:57 [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi Eric Bénard
@ 2013-04-08 12:57 ` Eric Bénard
2013-04-08 12:57 ` [PATCH 3/3] ARM: mx28: add auart4 " Eric Bénard
2013-04-09 12:35 ` [PATCH 1/3] ARM: mx28: add auart2 " Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Eric Bénard @ 2013-04-08 12:57 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: shawn.guo, linux-kernel, kernel
Add auart3 2 pins configuration on its main pads
Signed-off-by: Eric Bénard <eric@eukrea.com>
---
arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 13799cf..5c45f29 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -343,6 +343,17 @@
fsl,pull-up = <0>;
};
+ auart3_2pins_b: auart3-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+ 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.11.7
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 3/3] ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi
2013-04-08 12:57 [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi Eric Bénard
2013-04-08 12:57 ` [PATCH 2/3] ARM: mx28: add auart3 " Eric Bénard
@ 2013-04-08 12:57 ` Eric Bénard
2013-04-09 12:35 ` [PATCH 1/3] ARM: mx28: add auart2 " Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Eric Bénard @ 2013-04-08 12:57 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: shawn.guo, linux-kernel, kernel
Add auart4 2 pins configuration on SSP3 pads
Signed-off-by: Eric Bénard <eric@eukrea.com>
---
arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 5c45f29..25f2243 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -354,6 +354,17 @@
fsl,pull-up = <0>;
};
+ auart4_2pins_a: auart4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
+ 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.11.7
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi
2013-04-08 12:57 [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi Eric Bénard
2013-04-08 12:57 ` [PATCH 2/3] ARM: mx28: add auart3 " Eric Bénard
2013-04-08 12:57 ` [PATCH 3/3] ARM: mx28: add auart4 " Eric Bénard
@ 2013-04-09 12:35 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2013-04-09 12:35 UTC (permalink / raw)
To: Eric Bénard; +Cc: linux-arm-kernel, linux-kernel, kernel
On Mon, Apr 08, 2013 at 02:57:31PM +0200, Eric Bénard wrote:
> Add auart2 2 pins configuration on its main pads
>
> Signed-off-by: Eric Bénard <eric@eukrea.com>
All 3 patches applied, thanks.
> ---
> arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 7ba4966..13799cf 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -308,6 +308,17 @@
> fsl,pull-up = <0>;
> };
>
> + auart2_2pins_b: auart2-2pins@1 {
> + reg = <1>;
> + fsl,pinmux-ids = <
> + 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
> + 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
> + >;
> + fsl,drive-strength = <0>;
> + fsl,voltage = <1>;
> + fsl,pull-up = <0>;
> + };
> +
> auart3_pins_a: auart3@0 {
> reg = <0>;
> fsl,pinmux-ids = <
> --
> 1.7.11.7
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-04-09 12:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-08 12:57 [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi Eric Bénard
2013-04-08 12:57 ` [PATCH 2/3] ARM: mx28: add auart3 " Eric Bénard
2013-04-08 12:57 ` [PATCH 3/3] ARM: mx28: add auart4 " Eric Bénard
2013-04-09 12:35 ` [PATCH 1/3] ARM: mx28: add auart2 " Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).