[ 00/59] 3.4.55-stable review

[ 00/59] 3.4.55-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.4.55 release.
There are 59 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Jul 28 20:48:22 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.55-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.4.55-rc1

Eldad Zack <eldad@fogrefinery.com>
    ALSA: usb-audio: 6fire: return correct XRUN indication

Thomas Gleixner <tglx@linutronix.de>
    hrtimers: Move SMP function call to thread context

zhangwei(Jovi) <jovi.zhangwei@huawei.com>
    tracing: Fix irqs-off tag display in syscall tracing

David Jeffery <djeffery@redhat.com>
    lockd: protect nlm_blocked access in nlmsvc_retry_blocked

Barry Grussling <barry@grussling.com>
    usb: cp210x support SEL C662 Vendor/Device

Sami Rahman <sami.rahman@mmbresearch.com>
    USB: cp210x: add MMB and PI ZigBee USB Device Support

Luiz Angelo Daros de Luca <luizluca@gmail.com>
    usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter

Enrico Mioso <mrkiko.rs@gmail.com>
    usb: serial: option: Add ONYX 3G device support

Alexandr \\\"Sky\\\" Ivanov <alexandr.sky@gmail.com>
    USB: option: add D-Link DWM-152/C1 and DWM-156/C1

Daniil Bolsun <dan.bolsun@gmail.com>
    USB: option: append Petatel NP10T device to GSM modems list

Enrico Mioso <mrkiko.rs@gmail.com>
    usb: serial: option.c: remove ONDA MT825UP product ID fromdriver

Dan Williams <dcbw@redhat.com>
    usb: serial: option: add Olivetti Olicard 200

Bjørn Mork <bjorn@mork.no>
    usb: option: add TP-LINK MA260

Enrico Mioso <mrkiko.rs@gmail.com>
    usb: serial: option: blacklist ONDA MT689DC QMI interface

Steffen Maier <maier@linux.vnet.ibm.com>
    zfcp: block queue limits with data router

Andi Kleen <andi@firstfloor.org>
    SCSI: Fix incorrect memset in bnx2fc_parse_fcp_rsp

Bjørn Mork <bjorn@mork.no>
    SCSI: megaraid_sas: fix memory leak if SGL has zero length entries

Jan Kara <jack@suse.cz>
    writeback: Fix periodic writeback after fs mount

Eric Dumazet <edumazet@google.com>
    vlan: fix a race in egress prio management

Neil Horman <nhorman@tuxdriver.com>
    atl1e: unmap partially mapped skb on dma error and free skb

Neil Horman <nhorman@tuxdriver.com>
    atl1e: fix dma mapping warnings

dingtianhong <dingtianhong@huawei.com>
    ifb: fix oops when loading the ifb failed

dingtianhong <dingtianhong@huawei.com>
    dummy: fix oops when loading the dummy failed

Sasha Levin <sasha.levin@oracle.com>
    9p: fix off by one causing access violations and memory corruption

Hannes Frederic Sowa <hannes@stressinduktion.org>
    ipv6: in case of link failure remove route directly instead of letting it expire

Jason Wang <jasowang@redhat.com>
    macvtap: correctly linearize skb when zerocopy is used

dingtianhong <dingtianhong@huawei.com>
    ifb: fix rcu_sched self-detected stalls

Dave Kleikamp <dave.kleikamp@oracle.com>
    sunvnet: vnet_port_remove must call unregister_netdev

Hannes Frederic Sowa <hannes@stressinduktion.org>
    ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size

Hannes Frederic Sowa <hannes@stressinduktion.org>
    ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data

Wei Yongjun <yongjun_wei@trendmicro.com.cn>
    l2tp: add missing .owner to struct pppox_proto

Amerigo Wang <amwang@redhat.com>
    ipv6,mcast: always hold idev->lock before mca_lock

Changli Gao <xiaosuo@gmail.com>
    net: Swap ver and type in pppoe_hdr

Dave Jones <davej@redhat.com>
    x25: Fix broken locking in ioctl error paths.

Eric Dumazet <eric.dumazet@gmail.com>
    neighbour: fix a race in neigh_destroy()

Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
    sh_eth: fix unhandled RFE interrupt

Mathias Krause <minipli@googlemail.com>
    af_key: fix info leaks in notify messages

Eric Dumazet <edumazet@google.com>
    ipv6: ip6_sk_dst_check() must not assume ipv6 dst

Michael S. Tsirkin <mst@redhat.com>
    macvtap: fix recovery from gup errors

Gao feng <gaofeng@cn.fujitsu.com>
    ipv6: don't call addrconf_dst_alloc again when enable lo

Aydin Arik <aydin.arik@alliedtelesis.co.nz>
    ipv4: Fixed MD5 key lookups when adding/ removing MD5 to/ from TCP sockets.

Linus Lüssing <linus.luessing@web.de>
    bridge: fix switched interval for MLD Query types

Dave Kleikamp <dave.kleikamp@oracle.com>
    sparc: tsb must be flushed before tlb

bob picco <bpicco@meloft.net>
    sparc64 address-congruence property

Olivier DANET <odanet@caramail.com>
    sparc32: vm_area_struct access for old Sun SPARCs.

Peter Zijlstra <peterz@infradead.org>
    perf: Fix perf_lock_task_context() vs RCU

Jiri Olsa <jolsa@redhat.com>
    perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario

Jiri Olsa <jolsa@redhat.com>
    perf: Clone child context from parent context pmu

Alex Williamson <alex.williamson@redhat.com>
    iommu/amd: Only unmap large pages from the first pte

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    tracing: Use current_uid() for critical time tracing

Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
    SCSI: mpt2sas: fix firmware failure with wrong task attribute

Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
    SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down

Sujith Manoharan <c_manoha@qca.qualcomm.com>
    ath9k: Do not assign noise for NULL caldata

Gabor Juhos <juhosg@openwrt.org>
    rt2x00: read 5GHz TX power values from the correct offset

Thomas Gleixner <tglx@linutronix.de>
    tick: Prevent uncontrolled switch to oneshot mode

Fabio Estevam <fabio.estevam@freescale.com>
    ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK

Seth Heasley <seth.heasley@intel.com>
    ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs

Tejun Heo <tj@kernel.org>
    libata: skip SRST for all SIMG [34]7x port-multipliers

Jan Kara <jack@suse.cz>
    ext3: fix data=journal fast mount/umount hang


-------------

Diffstat:

 Makefile                                        |  4 +-
 arch/sparc/kernel/asm-offsets.c                 |  2 +
 arch/sparc/mm/hypersparc.S                      |  8 ++--
 arch/sparc/mm/init_64.c                         |  9 ++++-
 arch/sparc/mm/swift.S                           |  8 ++--
 arch/sparc/mm/tlb.c                             |  2 +-
 arch/sparc/mm/tsunami.S                         |  6 +--
 arch/sparc/mm/viking.S                          | 10 ++---
 drivers/ata/ata_piix.c                          |  2 +
 drivers/ata/libata-pmp.c                        | 33 ++++++++--------
 drivers/iommu/amd_iommu.c                       |  6 ++-
 drivers/net/dummy.c                             |  4 ++
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 50 +++++++++++++++++++++++--
 drivers/net/ethernet/renesas/sh_eth.c           | 17 +++++----
 drivers/net/ethernet/renesas/sh_eth.h           |  2 +-
 drivers/net/ethernet/sun/sunvnet.c              |  2 +
 drivers/net/ifb.c                               |  8 +++-
 drivers/net/macvtap.c                           | 14 +++++--
 drivers/net/wireless/ath/ath9k/calib.c          |  1 -
 drivers/net/wireless/rt2x00/rt2800lib.c         |  4 +-
 drivers/net/wireless/rt2x00/rt61pci.c           |  3 +-
 drivers/net/wireless/rt2x00/rt73usb.c           |  3 +-
 drivers/s390/scsi/zfcp_fsf.c                    |  4 ++
 drivers/s390/scsi/zfcp_scsi.c                   | 10 +++--
 drivers/scsi/bnx2fc/bnx2fc_io.c                 |  2 +-
 drivers/scsi/megaraid/megaraid_sas_base.c       | 10 +++--
 drivers/scsi/mpt2sas/mpt2sas_scsih.c            |  6 +--
 drivers/usb/serial/cp210x.c                     |  4 ++
 drivers/usb/serial/option.c                     | 23 +++++++-----
 fs/block_dev.c                                  |  9 ++++-
 fs/ext3/inode.c                                 |  3 +-
 fs/lockd/svclock.c                              |  4 ++
 include/linux/if_pppox.h                        |  4 +-
 include/net/addrconf.h                          |  3 ++
 include/net/udp.h                               |  1 +
 kernel/events/core.c                            | 28 ++++++++++++--
 kernel/hrtimer.c                                | 28 +++++++-------
 kernel/time/tick-broadcast.c                    | 10 ++++-
 kernel/trace/trace.c                            | 10 ++++-
 kernel/trace/trace_syscalls.c                   | 18 +++++++--
 net/8021q/vlan_dev.c                            |  7 ++++
 net/9p/trans_common.c                           | 10 ++---
 net/bridge/br_multicast.c                       |  5 ++-
 net/core/neighbour.c                            | 12 +++---
 net/ipv4/tcp_ipv4.c                             |  4 +-
 net/ipv4/udp.c                                  |  3 +-
 net/ipv6/addrconf.c                             | 31 ++++++++++-----
 net/ipv6/ip6_output.c                           | 24 ++++++++----
 net/ipv6/mcast.c                                | 18 +++++----
 net/ipv6/route.c                                |  9 +++--
 net/ipv6/udp.c                                  |  7 +++-
 net/key/af_key.c                                |  2 +
 net/l2tp/l2tp_ppp.c                             |  3 +-
 net/x25/af_x25.c                                | 15 ++++----
 sound/soc/codecs/sgtl5000.h                     |  2 +-
 sound/usb/6fire/pcm.c                           |  2 +-
 56 files changed, 365 insertions(+), 164 deletions(-)

[ 01/59] ext3: fix data=journal fast mount/umount hang

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit e643692138cfa33528f054b071ba2583509bb217 upstream.

In data=journal mode, if we unmount the file system before a
transaction has a chance to complete, when the journal inode is being
evicted, we can end up calling into log_wait_commit() for the
last transaction, after the journalling machinery has been shut down.
That triggers the WARN_ONCE in __log_start_commit().

Arguably we should adjust ext3_should_journal_data() to return FALSE
for the journal inode, but the only place it matters is
ext3_evict_inode(), and so it's to save a bit of CPU time, and to make
the patch much more obviously correct by inspection(tm), we'll fix it
by explicitly not trying to waiting for a journal commit when we are
evicting the journal inode, since it's guaranteed to never succeed in
this case.

This can be easily replicated via:

     mount -t ext3 -o data=journal /dev/vdb /vdb ; umount /vdb

This is a port of ext4 fix from Ted Ts'o.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext3/inode.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -218,7 +218,8 @@ void ext3_evict_inode (struct inode *ino
 	 */
 	if (inode->i_nlink && ext3_should_journal_data(inode) &&
 	    EXT3_SB(inode->i_sb)->s_journal &&
-	    (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode))) {
+	    (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode)) &&
+	    inode->i_ino != EXT3_JOURNAL_INO) {
 		tid_t commit_tid = atomic_read(&ei->i_datasync_tid);
 		journal_t *journal = EXT3_SB(inode->i_sb)->s_journal;
 

[ 02/59] libata: skip SRST for all SIMG [34]7x port-multipliers

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 7a87718d92760fc688628ad6a430643dafa16f1f upstream.

For some reason, a lot of port-multipliers have issues with softreset.
SIMG [34]7x series port-multipliers have been quite erratic in this
regard.  I recall that it was better with some firmware revisions and
the current list of quirks worked fine for a while.  I think it got
worse with later firmwares or maybe my test coverage wasn't good
enough.  Anyways, HPA is reporting that his 3726 setup suffers SRST
failures and then the PMP gets confused and fails to probe the last
port.

The hope was that we try to stick to the standard as much as possible
and soonish the PMPs and their firmwares will improve in quality, so
the quirk list was kept to minimum.  Well, it seems like that's never
gonna happen.

Let's set NO_SRST for all [34]7x PMPs so that whatever remaining
userbase of the device suffer the least.  Maybe we should do the same
for 57xx's but unfortunately I don't have any device left to test and
I'm not even sure 57xx's have ever been made widely available, so
let's leave those alone for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-pmp.c |   33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -389,9 +389,13 @@ static void sata_pmp_quirks(struct ata_p
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;
 
-			/* Class code report is unreliable. */
+			/*
+			 * Class code report is unreliable and SRST times
+			 * out under certain configurations.
+			 */
 			if (link->pmp < 5)
-				link->flags |= ATA_LFLAG_ASSUME_ATA;
+				link->flags |= ATA_LFLAG_NO_SRST |
+					       ATA_LFLAG_ASSUME_ATA;
 
 			/* port 5 is for SEMB device and it doesn't like SRST */
 			if (link->pmp == 5)
@@ -399,20 +403,17 @@ static void sata_pmp_quirks(struct ata_p
 					       ATA_LFLAG_ASSUME_SEMB;
 		}
 	} else if (vendor == 0x1095 && devid == 0x4723) {
-		/* sil4723 quirks */
-		ata_for_each_link(link, ap, EDGE) {
-			/* link reports offline after LPM */
-			link->flags |= ATA_LFLAG_NO_LPM;
-
-			/* class code report is unreliable */
-			if (link->pmp < 2)
-				link->flags |= ATA_LFLAG_ASSUME_ATA;
-
-			/* the config device at port 2 locks up on SRST */
-			if (link->pmp == 2)
-				link->flags |= ATA_LFLAG_NO_SRST |
-					       ATA_LFLAG_ASSUME_ATA;
-		}
+		/*
+		 * sil4723 quirks
+		 *
+		 * Link reports offline after LPM.  Class code report is
+		 * unreliable.  SIMG PMPs never got SRST reliable and the
+		 * config device at port 2 locks up on SRST.
+		 */
+		ata_for_each_link(link, ap, EDGE)
+			link->flags |= ATA_LFLAG_NO_LPM |
+				       ATA_LFLAG_NO_SRST |
+				       ATA_LFLAG_ASSUME_ATA;
 	} else if (vendor == 0x1095 && devid == 0x4726) {
 		/* sil4726 quirks */
 		ata_for_each_link(link, ap, EDGE) {

[ 03/59] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit c7e8695bfa0611b39493a9dfe8bab9f63f9809bd upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ata_piix.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -352,6 +352,8 @@ static const struct pci_device_id piix_p
 	/* SATA Controller IDE (BayTrail) */
 	{ 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
 	{ 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
+	/* SATA Controller IDE (Coleto Creek) */
+	{ 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 
 	{ }	/* terminate list */
 };

[ 04/59] ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.estevam@freescale.com>

commit 5c78dfe87ea04b501ee000a7f03b9432ac9d008c upstream.

SGTL5000_PLL_FRAC_DIV_MASK is used to mask bits 0-10 (11 bits in total) of
register CHIP_PLL_CTRL, so fix the mask to accomodate all this bit range.

Reported-by: Oskar Schirmer <oskar@scara.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/sgtl5000.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -347,7 +347,7 @@
 #define SGTL5000_PLL_INT_DIV_MASK		0xf800
 #define SGTL5000_PLL_INT_DIV_SHIFT		11
 #define SGTL5000_PLL_INT_DIV_WIDTH		5
-#define SGTL5000_PLL_FRAC_DIV_MASK		0x0700
+#define SGTL5000_PLL_FRAC_DIV_MASK		0x07ff
 #define SGTL5000_PLL_FRAC_DIV_SHIFT		0
 #define SGTL5000_PLL_FRAC_DIV_WIDTH		11
 

[ 05/59] tick: Prevent uncontrolled switch to oneshot mode

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 1f73a9806bdd07a5106409bbcab3884078bd34fe upstream.

When the system switches from periodic to oneshot mode, the broadcast
logic causes a possibility that a CPU which has not yet switched to
oneshot mode puts its own clock event device into oneshot mode without
updating the state and the timer handler.

CPU0				CPU1
				per cpu tickdev is in periodic mode
				and switched to broadcast

Switch to oneshot mode
 tick_broadcast_switch_to_oneshot()
  cpumask_copy(tick_oneshot_broacast_mask,
	       tick_broadcast_mask);

  broadcast device mode = oneshot

				Timer interrupt

				irq_enter()
				 tick_check_oneshot_broadcast()
				  dev->set_mode(ONESHOT);

				tick_handle_periodic()
				 if (dev->mode == ONESHOT)
				   dev->next_event += period;
				   FAIL.

We fail, because dev->next_event contains KTIME_MAX, if the device was
in periodic mode before the uncontrolled switch to oneshot happened.

We must copy the broadcast bits over to the oneshot mask, because
otherwise a CPU which relies on the broadcast would not been woken up
anymore after the broadcast device switched to oneshot mode.

So we need to verify in tick_check_oneshot_broadcast() whether the CPU
has already switched to oneshot mode. If not, leave the device
untouched and let the CPU switch controlled into oneshot mode.

This is a long standing bug, which was never noticed, because the main
user of the broadcast x86 cannot run into that scenario, AFAICT. The
nonarchitected timer mess of ARM creates a gazillion of differently
broken abominations which trigger the shortcomings of that broadcast
code, which better had never been necessary in the first place.

Reported-and-tested-by: Stehle Vincent-B46079 <B46079@freescale.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307012153060.4013@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/tick-broadcast.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -400,7 +400,15 @@ void tick_check_oneshot_broadcast(int cp
 	if (cpumask_test_cpu(cpu, to_cpumask(tick_broadcast_oneshot_mask))) {
 		struct tick_device *td = &per_cpu(tick_cpu_device, cpu);
 
-		clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_ONESHOT);
+		/*
+		 * We might be in the middle of switching over from
+		 * periodic to oneshot. If the CPU has not yet
+		 * switched over, leave the device alone.
+		 */
+		if (td->mode == TICKDEV_MODE_ONESHOT) {
+			clockevents_set_mode(td->evtdev,
+					     CLOCK_EVT_MODE_ONESHOT);
+		}
 	}
 }
 

[ 06/59] rt2x00: read 5GHz TX power values from the correct offset

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabor Juhos <juhosg@openwrt.org>

commit 0a6f3a8ebaf13407523c2c7d575b4ca2debd23ba upstream.

The current code uses the same index value both
for the channel information array and for the TX
power table. The index starts from 14, however the
index of the TX power table must start from zero.

Fix it, in order to get the correct TX power value
for a given channel.

The changes in rt61pci.c and rt73usb.c are compile
tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rt2x00/rt2800lib.c |    4 ++--
 drivers/net/wireless/rt2x00/rt61pci.c   |    3 ++-
 drivers/net/wireless/rt2x00/rt73usb.c   |    3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4627,8 +4627,8 @@ int rt2800_probe_hw_mode(struct rt2x00_d
 		default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
 
 		for (i = 14; i < spec->num_channels; i++) {
-			info[i].default_power1 = default_power1[i];
-			info[i].default_power2 = default_power2[i];
+			info[i].default_power1 = default_power1[i - 14];
+			info[i].default_power2 = default_power2[i - 14];
 		}
 	}
 
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2822,7 +2822,8 @@ static int rt61pci_probe_hw_mode(struct
 		tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
 		for (i = 14; i < spec->num_channels; i++) {
 			info[i].max_power = MAX_TXPOWER;
-			info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+			info[i].default_power1 =
+					TXPOWER_FROM_DEV(tx_power[i - 14]);
 		}
 	}
 
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2167,7 +2167,8 @@ static int rt73usb_probe_hw_mode(struct
 		tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
 		for (i = 14; i < spec->num_channels; i++) {
 			info[i].max_power = MAX_TXPOWER;
-			info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+			info[i].default_power1 =
+					TXPOWER_FROM_DEV(tx_power[i - 14]);
 		}
 	}
 

[ 07/59] ath9k: Do not assign noise for NULL caldata

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

commit d3bcb7b24bbf09fde8405770e676fe0c11c79662 upstream.

ah->noise is maintained globally and not per-channel. This
is updated in the reset() routine after the NF history has been
filled for the *current channel*, just before switching to
the new channel. There is no need to do it inside getnf(), since
ah->noise must contain a value for the new channel.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/calib.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -389,7 +389,6 @@ bool ath9k_hw_getnf(struct ath_hw *ah, s
 
 	if (!caldata) {
 		chan->noisefloor = nf;
-		ah->noise = ath9k_hw_getchan_noise(ah, chan);
 		return false;
 	}
 

[ 08/59] SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>

commit f76ccaac4f82c463a037aa4a1e4ccb85c7011814 upstream.

FCP device remains in status ERP_FAILED when device is switched online
or adapter recovery is triggered  while link to SAN is down.

When Exchange Configuration Data command returns the FSF status
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process.
The only retries are done during the common error recovery procedure
(i.e. max. 3 retries with 8sec sleep between) and remains in status
ERP_FAILED with QDIO down.

This commit reverts the commit 0df138476c8306478d6e726f044868b4bccf411c
(zfcp: Fix adapter activation on link down).
When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the
adapter recovery will be finished without any retries. QDIO will be
up now and status changes such as LINK UP will be received now.

Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_fsf.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -563,6 +563,10 @@ static void zfcp_fsf_exchange_config_dat
 		fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
 		adapter->hydra_version = 0;
 
+		/* avoids adapter shutdown to be able to recognize
+		 * events such as LINK UP */
+		atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK,
+				&adapter->status);
 		zfcp_fsf_link_down_info_eval(req,
 			&qtcb->header.fsf_status_qual.link_down_info);
 		break;

[ 09/59] SCSI: mpt2sas: fix firmware failure with wrong task attribute

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>

commit 48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream.

When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3963,11 +3963,7 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd,
 			else
 				mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 		} else
-/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */
-/*			mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED;
- */
-			mpi_control |= (0x500);
-
+			mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 	} else
 		mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 	/* Make sure Device is not raid volume.

[ 10/59] tracing: Use current_uid() for critical time tracing

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit f17a5194859a82afe4164e938b92035b86c55794 upstream.

The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.

When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.

During testing, this RCU lockdep dump appeared:

[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G        W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021]  #0:  (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G        W    3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021]  0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021]  ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021]  ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021]  [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021]  [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021]  [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021]  [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021]  [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021]  [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021]  [<ffffffff8154bdca>] int_signal+0x12/0x17

What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.

The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).

As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.

This fixes the RCU suspicious splat.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -687,7 +687,15 @@ __update_max_tr(struct trace_array *tr,
 
 	memcpy(max_data->comm, tsk->comm, TASK_COMM_LEN);
 	max_data->pid = tsk->pid;
-	max_data->uid = task_uid(tsk);
+	/*
+	 * If tsk == current, then use current_uid(), as that does not use
+	 * RCU. The irq tracer can be called out of RCU scope.
+	 */
+	if (tsk == current)
+		max_data->uid = current_uid();
+	else
+		max_data->uid = task_uid(tsk);
+
 	max_data->nice = tsk->static_prio - 20 - MAX_RT_PRIO;
 	max_data->policy = tsk->policy;
 	max_data->rt_priority = tsk->rt_priority;

[ 11/59] iommu/amd: Only unmap large pages from the first pte

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit 60d0ca3cfd199b6612bbbbf4999a3470dad38bb1 upstream.

If we use a large mapping, the expectation is that only unmaps from
the first pte in the superpage are supported.  Unmaps from offsets
into the superpage should fail (ie. return zero sized unmap).  In the
current code, unmapping from an offset clears the size of the full
mapping starting from an offset.  For instance, if we map a 16k
physically contiguous range at IOVA 0x0 with a large page, then
attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and
the unmap returns 16k unmapped.  This potentially incorrectly clears
valid mappings and confuses drivers like VFIO that use the unmap size
to release pinned pages.

Fix by refusing to unmap from offsets into the page.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/amd_iommu.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1309,6 +1309,10 @@ static unsigned long iommu_unmap_page(st
 
 			/* Large PTE found which maps this address */
 			unmap_size = PTE_PAGE_SIZE(*pte);
+
+			/* Only unmap from the first pte in the page */
+			if ((unmap_size - 1) & bus_addr)
+				break;
 			count      = PAGE_SIZE_PTE_COUNT(unmap_size);
 			for (i = 0; i < count; i++)
 				pte[i] = 0ULL;
@@ -1318,7 +1322,7 @@ static unsigned long iommu_unmap_page(st
 		unmapped += unmap_size;
 	}
 
-	BUG_ON(!is_power_of_2(unmapped));
+	BUG_ON(unmapped && !is_power_of_2(unmapped));
 
 	return unmapped;
 }

[ 12/59] perf: Clone child context from parent context pmu

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <jolsa@redhat.com>

commit 734df5ab549ca44f40de0f07af1c8803856dfb18 upstream.

Currently when the child context for inherited events is
created, it's based on the pmu object of the first event
of the parent context.

This is wrong for the following scenario:

  - HW context having HW and SW event
  - HW event got removed (closed)
  - SW event stays in HW context as the only event
    and its pmu is used to clone the child context

The issue starts when the cpu context object is touched
based on the pmu context object (__get_cpu_context). In
this case the HW context will work with SW cpu context
ending up with following WARN below.

Fixing this by using parent context pmu object to clone
from child context.

Addresses the following warning reported by Vince Weaver:

[ 2716.472065] ------------[ cut here ]------------
[ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x)
[ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn
[ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2
[ 2716.476035] Hardware name: AOpen   DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2
[ 2716.476035]  0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18
[ 2716.476035]  ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad
[ 2716.476035]  ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550
[ 2716.476035] Call Trace:
[ 2716.476035]  [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70
[ 2716.476035]  [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f
[ 2716.476035]  [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194
[ 2716.476035]  [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c
[ 2716.476035]  [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394
[ 2716.476035]  [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98
[ 2716.476035]  [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad
[ 2716.476035]  [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1
[ 2716.476035]  [<ffffffff8100205d>] ? do_signal+0x3c/0x432
[ 2716.476035]  [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141
[ 2716.476035]  [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90
[ 2716.476035]  [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118
[ 2716.476035]  [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c
[ 2716.476035]  [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6
[ 2716.476035]  [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d
[ 2716.476035]  [<ffffffff813654f5>] ? retint_signal+0x3d/0x78
[ 2716.476035] ---[ end trace 827178d8a5966c3d ]---

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6933,7 +6933,7 @@ inherit_task_group(struct perf_event *ev
 		 * child.
 		 */
 
-		child_ctx = alloc_perf_context(event->pmu, child);
+		child_ctx = alloc_perf_context(parent_ctx->pmu, child);
 		if (!child_ctx)
 			return -ENOMEM;
 

[ 13/59] perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <jolsa@redhat.com>

commit 06f417968beac6e6b614e17b37d347aa6a6b1d30 upstream.

The '!ctx->is_active' check has a valid scenario, so
there's no need for the warning.

The reason is that there's a time window between the
'ctx->is_active' check in the perf_event_enable() function
and the __perf_event_enable() function having:

  - IRQs on
  - ctx->lock unlocked

where the task could be killed and 'ctx' deactivated by
perf_event_exit_task(), ending up with the warning below.

So remove the WARN_ON_ONCE() check and add comments to
explain it all.

This addresses the following warning reported by Vince Weaver:

[  324.983534] ------------[ cut here ]------------
[  324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190()
[  324.984420] Modules linked in:
[  324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246
[  324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010
[  324.984420]  0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00
[  324.984420]  ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860
[  324.984420]  0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a
[  324.984420] Call Trace:
[  324.984420]  <IRQ>  [<ffffffff8160ea0b>] dump_stack+0x19/0x1b
[  324.984420]  [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0
[  324.984420]  [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20
[  324.984420]  [<ffffffff81134437>] __perf_event_enable+0x187/0x190
[  324.984420]  [<ffffffff81130030>] remote_function+0x40/0x50
[  324.984420]  [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130
[  324.984420]  [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40
[  324.984420]  [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80
[  324.984420]  <EOI>  [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70
[  324.984420]  [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210
[  324.984420]  [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60
[  324.984420]  [<ffffffff81086946>] do_exit+0x2b6/0xa40
[  324.984420]  [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30
[  324.984420]  [<ffffffff81087279>] do_group_exit+0x49/0xc0
[  324.984420]  [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620
[  324.984420]  [<ffffffff81043057>] do_signal+0x57/0x5a0
[  324.984420]  [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0
[  324.984420]  [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe
[  324.984420]  [<ffffffff816166cd>] ? retint_signal+0x11/0x84
[  324.984420]  [<ffffffff81043605>] do_notify_resume+0x65/0x80
[  324.984420]  [<ffffffff81616702>] retint_signal+0x46/0x84
[  324.984420] ---[ end trace 442ec2f04db3771a ]---

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/core.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1702,7 +1702,16 @@ static int __perf_event_enable(void *inf
 	struct perf_cpu_context *cpuctx = __get_cpu_context(ctx);
 	int err;
 
-	if (WARN_ON_ONCE(!ctx->is_active))
+	/*
+	 * There's a time window between 'ctx->is_active' check
+	 * in perf_event_enable function and this place having:
+	 *   - IRQs on
+	 *   - ctx->lock unlocked
+	 *
+	 * where the task could be killed and 'ctx' deactivated
+	 * by perf_event_exit_task.
+	 */
+	if (!ctx->is_active)
 		return -EINVAL;
 
 	raw_spin_lock(&ctx->lock);

[ 14/59] perf: Fix perf_lock_task_context() vs RCU

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit 058ebd0eba3aff16b144eabf4510ed9510e1416e upstream.

Jiri managed to trigger this warning:

 [] ======================================================
 [] [ INFO: possible circular locking dependency detected ]
 [] 3.10.0+ #228 Tainted: G        W
 [] -------------------------------------------------------
 [] p/6613 is trying to acquire lock:
 []  (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250
 []
 [] but task is already holding lock:
 []  (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0
 []
 [] which lock already depends on the new lock.
 []
 [] the existing dependency chain (in reverse order) is:
 []
 [] -> #4 (&ctx->lock){-.-...}:
 [] -> #3 (&rq->lock){-.-.-.}:
 [] -> #2 (&p->pi_lock){-.-.-.}:
 [] -> #1 (&rnp->nocb_gp_wq[1]){......}:
 [] -> #0 (rcu_node_0){..-...}:

Paul was quick to explain that due to preemptible RCU we cannot call
rcu_read_unlock() while holding scheduler (or nested) locks when part
of the read side critical section was preemptible.

Therefore solve it by making the entire RCU read side non-preemptible.

Also pull out the retry from under the non-preempt to play nice with RT.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Helped-out-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/core.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -719,8 +719,18 @@ perf_lock_task_context(struct task_struc
 {
 	struct perf_event_context *ctx;
 
-	rcu_read_lock();
 retry:
+	/*
+	 * One of the few rules of preemptible RCU is that one cannot do
+	 * rcu_read_unlock() while holding a scheduler (or nested) lock when
+	 * part of the read side critical section was preemptible -- see
+	 * rcu_read_unlock_special().
+	 *
+	 * Since ctx->lock nests under rq->lock we must ensure the entire read
+	 * side critical section is non-preemptible.
+	 */
+	preempt_disable();
+	rcu_read_lock();
 	ctx = rcu_dereference(task->perf_event_ctxp[ctxn]);
 	if (ctx) {
 		/*
@@ -736,6 +746,8 @@ retry:
 		raw_spin_lock_irqsave(&ctx->lock, *flags);
 		if (ctx != rcu_dereference(task->perf_event_ctxp[ctxn])) {
 			raw_spin_unlock_irqrestore(&ctx->lock, *flags);
+			rcu_read_unlock();
+			preempt_enable();
 			goto retry;
 		}
 
@@ -745,6 +757,7 @@ retry:
 		}
 	}
 	rcu_read_unlock();
+	preempt_enable();
 	return ctx;
 }
 

[ 15/59] sparc32: vm_area_struct access for old Sun SPARCs.

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Olivier DANET <odanet@caramail.com>

Commit e4c6bfd2d79d063017ab19a18915f0bc759f32d9 ("mm: rearrange
vm_area_struct for fewer cache misses") changed the layout of the
vm_area_struct structure, it broke several SPARC32 assembly routines
which used numerical constants for accessing the vm_mm field.

This patch defines the VMA_VM_MM constant to replace the immediate values.

Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/kernel/asm-offsets.c |    2 ++
 arch/sparc/mm/hypersparc.S      |    8 ++++----
 arch/sparc/mm/swift.S           |    8 ++++----
 arch/sparc/mm/tsunami.S         |    6 +++---
 arch/sparc/mm/viking.S          |   10 +++++-----
 5 files changed, 18 insertions(+), 16 deletions(-)

--- a/arch/sparc/kernel/asm-offsets.c
+++ b/arch/sparc/kernel/asm-offsets.c
@@ -34,6 +34,8 @@ int foo(void)
 	DEFINE(AOFF_task_thread, offsetof(struct task_struct, thread));
 	BLANK();
 	DEFINE(AOFF_mm_context, offsetof(struct mm_struct, context));
+	BLANK();
+	DEFINE(VMA_VM_MM,    offsetof(struct vm_area_struct, vm_mm));
 
 	/* DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28); */
 	return 0;
--- a/arch/sparc/mm/hypersparc.S
+++ b/arch/sparc/mm/hypersparc.S
@@ -74,7 +74,7 @@ hypersparc_flush_cache_mm_out:
 
 	/* The things we do for performance... */
 hypersparc_flush_cache_range:
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 #ifndef CONFIG_SMP
 	ld	[%o0 + AOFF_mm_context], %g1
 	cmp	%g1, -1
@@ -163,7 +163,7 @@ hypersparc_flush_cache_range_out:
 	 */
 	/* Verified, my ass... */
 hypersparc_flush_cache_page:
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	ld	[%o0 + AOFF_mm_context], %g2
 #ifndef CONFIG_SMP
 	cmp	%g2, -1
@@ -284,7 +284,7 @@ hypersparc_flush_tlb_mm_out:
 	 sta	%g5, [%g1] ASI_M_MMUREGS
 
 hypersparc_flush_tlb_range:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5
@@ -307,7 +307,7 @@ hypersparc_flush_tlb_range_out:
 	 sta	%g5, [%g1] ASI_M_MMUREGS
 
 hypersparc_flush_tlb_page:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	andn	%o1, (PAGE_SIZE - 1), %o1
--- a/arch/sparc/mm/swift.S
+++ b/arch/sparc/mm/swift.S
@@ -105,7 +105,7 @@ swift_flush_cache_mm_out:
 
 	.globl	swift_flush_cache_range
 swift_flush_cache_range:
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	sub	%o2, %o1, %o2
 	sethi	%hi(4096), %o3
 	cmp	%o2, %o3
@@ -116,7 +116,7 @@ swift_flush_cache_range:
 
 	.globl	swift_flush_cache_page
 swift_flush_cache_page:
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 70:
 	ld	[%o0 + AOFF_mm_context], %g2
 	cmp	%g2, -1
@@ -219,7 +219,7 @@ swift_flush_sig_insns:
 	.globl	swift_flush_tlb_range
 	.globl	swift_flush_tlb_all
 swift_flush_tlb_range:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 swift_flush_tlb_mm:
 	ld	[%o0 + AOFF_mm_context], %g2
 	cmp	%g2, -1
@@ -233,7 +233,7 @@ swift_flush_tlb_all_out:
 
 	.globl	swift_flush_tlb_page
 swift_flush_tlb_page:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	andn	%o1, (PAGE_SIZE - 1), %o1
--- a/arch/sparc/mm/tsunami.S
+++ b/arch/sparc/mm/tsunami.S
@@ -24,7 +24,7 @@
 	/* Sliiick... */
 tsunami_flush_cache_page:
 tsunami_flush_cache_range:
-	ld	[%o0 + 0x0], %o0	/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 tsunami_flush_cache_mm:
 	ld	[%o0 + AOFF_mm_context], %g2
 	cmp	%g2, -1
@@ -46,7 +46,7 @@ tsunami_flush_sig_insns:
 
 	/* More slick stuff... */
 tsunami_flush_tlb_range:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 tsunami_flush_tlb_mm:
 	ld	[%o0 + AOFF_mm_context], %g2
 	cmp	%g2, -1
@@ -65,7 +65,7 @@ tsunami_flush_tlb_out:
 
 	/* This one can be done in a fine grained manner... */
 tsunami_flush_tlb_page:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	andn	%o1, (PAGE_SIZE - 1), %o1
--- a/arch/sparc/mm/viking.S
+++ b/arch/sparc/mm/viking.S
@@ -109,7 +109,7 @@ viking_mxcc_flush_page:
 viking_flush_cache_page:
 viking_flush_cache_range:
 #ifndef CONFIG_SMP
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 #endif
 viking_flush_cache_mm:
 #ifndef CONFIG_SMP
@@ -149,7 +149,7 @@ viking_flush_tlb_mm:
 #endif
 
 viking_flush_tlb_range:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5
@@ -174,7 +174,7 @@ viking_flush_tlb_range:
 #endif
 
 viking_flush_tlb_page:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5
@@ -240,7 +240,7 @@ sun4dsmp_flush_tlb_range:
 	tst	%g5
 	bne	3f
 	 mov	SRMMU_CTX_REG, %g1
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5
 	sethi	%hi(~((1 << SRMMU_PGDIR_SHIFT) - 1)), %o4
@@ -266,7 +266,7 @@ sun4dsmp_flush_tlb_page:
 	tst	%g5
 	bne	2f
 	 mov	SRMMU_CTX_REG, %g1
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5
 	and	%o1, PAGE_MASK, %o1

[ 16/59] sparc64 address-congruence property

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: bob picco <bpicco@meloft.net>

The Machine Description (MD) property "address-congruence-offset" is
optional. According to the MD specification the value is assumed 0UL when
not present. This caused early boot failure on T5.

Signed-off-by: Bob Picco <bob.picco@oracle.com>
CC: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/mm/init_64.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1067,7 +1067,14 @@ static int __init grab_mblocks(struct md
 		m->size = *val;
 		val = mdesc_get_property(md, node,
 					 "address-congruence-offset", NULL);
-		m->offset = *val;
+
+		/* The address-congruence-offset property is optional.
+		 * Explicity zero it be identifty this.
+		 */
+		if (val)
+			m->offset = *val;
+		else
+			m->offset = 0UL;
 
 		numadbg("MBLOCK[%d]: base[%llx] size[%llx] offset[%llx]\n",
 			count - 1, m->base, m->size, m->offset);

[ 17/59] sparc: tsb must be flushed before tlb

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Kleikamp <dave.kleikamp@oracle.com>

This fixes a race where a cpu may re-load a tlb from a stale tsb right
after it has been flushed by a remote function call.

I still see some instability when stressing the system with parallel
kernel builds while creating memory pressure by writing to
/proc/sys/vm/nr_hugepages, but this patch improves the stability
significantly.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/mm/tlb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/sparc/mm/tlb.c
+++ b/arch/sparc/mm/tlb.c
@@ -115,8 +115,8 @@ no_cache_flush:
 	}
 
 	if (!tb->active) {
-		global_flush_tlb_page(mm, vaddr);
 		flush_tsb_user_page(mm, vaddr);
+		global_flush_tlb_page(mm, vaddr);
 		goto out;
 	}
 

[ 18/59] bridge: fix switched interval for MLD Query types

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Lüssing <linus.luessing@web.de>

[ Upstream commit 32de868cbc6bee010d2cee95b5071b25ecbec8c3 ]

General Queries (the one with the Multicast Address field
set to zero / '::') are supposed to have a Maximum Response Delay
of [Query Response Interval], while for Multicast-Address-Specific
Queries it is [Last Listener Query Interval] - not the other way
round. (see RFC2710, section 7.3+7.8)

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_multicast.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -467,8 +467,9 @@ static struct sk_buff *br_ip6_multicast_
 	skb_set_transport_header(skb, skb->len);
 	mldq = (struct mld_msg *) icmp6_hdr(skb);
 
-	interval = ipv6_addr_any(group) ? br->multicast_last_member_interval :
-					  br->multicast_query_response_interval;
+	interval = ipv6_addr_any(group) ?
+			br->multicast_query_response_interval :
+			br->multicast_last_member_interval;
 
 	mldq->mld_type = ICMPV6_MGM_QUERY;
 	mldq->mld_code = 0;

[ 19/59] ipv4: Fixed MD5 key lookups when adding/ removing MD5 to/ from TCP sockets.

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aydin Arik <aydin.arik@alliedtelesis.co.nz>

[ Upstream commit c0353c7b5da4cbd2ab8227e84bbc9c79890f24ce ]

MD5 key lookups on a given TCP socket were being performed
incorrectly. This fix alters parameter inputs to the MD5
lookup function tcp_md5_do_lookup, which is called by functions
tcp_md5_do_add and tcp_md5_do_del. Specifically, the change now
inputs the correct address and address family required to make
a proper lookup.

Signed-off-by: Aydin Arik <aydin.arik@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_ipv4.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -974,7 +974,7 @@ int tcp_md5_do_add(struct sock *sk, cons
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct tcp_md5sig_info *md5sig;
 
-	key = tcp_md5_do_lookup(sk, (union tcp_md5_addr *)&addr, AF_INET);
+	key = tcp_md5_do_lookup(sk, addr, family);
 	if (key) {
 		/* Pre-existing entry - just update that one. */
 		memcpy(key->key, newkey, newkeylen);
@@ -1019,7 +1019,7 @@ int tcp_md5_do_del(struct sock *sk, cons
 	struct tcp_md5sig_key *key;
 	struct tcp_md5sig_info *md5sig;
 
-	key = tcp_md5_do_lookup(sk, (union tcp_md5_addr *)&addr, AF_INET);
+	key = tcp_md5_do_lookup(sk, addr, family);
 	if (!key)
 		return -ENOENT;
 	hlist_del_rcu(&key->node);

[ 20/59] ipv6: dont call addrconf_dst_alloc again when enable lo

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gao feng <gaofeng@cn.fujitsu.com>

[ Upstream commit a881ae1f625c599b460cc8f8a7fcb1c438f699ad ]

If we disable all of the net interfaces, and enable
un-lo interface before lo interface, we already allocated
the addrconf dst in ipv6_add_addr. So we shouldn't allocate
it again when we enable lo interface.

Otherwise the message below will be triggered.
unregister_netdevice: waiting for sit1 to become free. Usage count = 1

This problem is introduced by commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/addrconf.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2429,6 +2429,9 @@ static void init_loopback(struct net_dev
 			if (sp_ifa->flags & (IFA_F_DADFAILED | IFA_F_TENTATIVE))
 				continue;
 
+			if (sp_ifa->rt)
+				continue;
+
 			sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0);
 
 			/* Failure cases are ignored */

[ 21/59] macvtap: fix recovery from gup errors

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Michael S. Tsirkin" <mst@redhat.com>

[ Upstream commit 4c7ab054ab4f5d63625508ed6f8a607184cae7c2 ]

get user pages might fail partially in macvtap zero copy
mode. To recover we need to put all pages that we got,
but code used a wrong index resulting in double-free
errors.

Reported-by: Brad Hubbard <bhubbard@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macvtap.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -534,8 +534,10 @@ static int zerocopy_sg_from_iovec(struct
 			return -EMSGSIZE;
 		num_pages = get_user_pages_fast(base, size, 0, &page[i]);
 		if (num_pages != size) {
-			for (i = 0; i < num_pages; i++)
-				put_page(page[i]);
+			int j;
+
+			for (j = 0; j < num_pages; j++)
+				put_page(page[i + j]);
 		}
 		truesize = size * PAGE_SIZE;
 		skb->data_len += len;

[ 22/59] ipv6: ip6_sk_dst_check() must not assume ipv6 dst

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit a963a37d384d71ad43b3e9e79d68d42fbe0901f3 ]

It's possible to use AF_INET6 sockets and to connect to an IPv4
destination. After this, socket dst cache is a pointer to a rtable,
not rt6_info.

ip6_sk_dst_check() should check the socket dst cache is IPv6, or else
various corruptions/crashes can happen.

Dave Jones can reproduce immediate crash with
trinity -q -l off -n -c sendmsg -c connect

With help from Hannes Frederic Sowa

Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_output.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -912,11 +912,17 @@ static struct dst_entry *ip6_sk_dst_chec
 					  const struct flowi6 *fl6)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
-	struct rt6_info *rt = (struct rt6_info *)dst;
+	struct rt6_info *rt;
 
 	if (!dst)
 		goto out;
 
+	if (dst->ops->family != AF_INET6) {
+		dst_release(dst);
+		return NULL;
+	}
+
+	rt = (struct rt6_info *)dst;
 	/* Yes, checking route validity in not connected
 	 * case is not very simple. Take into account,
 	 * that we do not support routing by source, TOS,

[ 23/59] af_key: fix info leaks in notify messages

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit a5cc68f3d63306d0d288f31edfc2ae6ef8ecd887 ]

key_notify_sa_flush() and key_notify_policy_flush() miss to initialize
the sadb_msg_reserved member of the broadcasted message and thereby
leak 2 bytes of heap memory to listeners. Fix that.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/key/af_key.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1705,6 +1705,7 @@ static int key_notify_sa_flush(const str
 	hdr->sadb_msg_version = PF_KEY_V2;
 	hdr->sadb_msg_errno = (uint8_t) 0;
 	hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t));
+	hdr->sadb_msg_reserved = 0;
 
 	pfkey_broadcast(skb, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net);
 
@@ -2686,6 +2687,7 @@ static int key_notify_policy_flush(const
 	hdr->sadb_msg_version = PF_KEY_V2;
 	hdr->sadb_msg_errno = (uint8_t) 0;
 	hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t));
+	hdr->sadb_msg_reserved = 0;
 	pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net);
 	return 0;
 

[ 24/59] sh_eth: fix unhandled RFE interrupt

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit ca8c35852138ee0585eaffe6b9f10a5261ea7771 ]

EESR.RFE (receive FIFO overflow) interrupt is enabled by the driver on all SoCs
and sh_eth_error() handles it but it's not present in any initializer/assignment
of the 'eesr_err_check' field of 'struct sh_eth_cpu_data'. This leads to that
interrupt not being handled and cleared, and finally to disabling IRQ and the
driver being non-functional.

Modify DEFAULT_EESR_ERR_CHECK macro and all explicit initializers of the above
mentioned field to contain the EESR.RFE bit. Remove useless backslashes from the
initializers, while at it.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/renesas/sh_eth.c |   17 +++++++++--------
 drivers/net/ethernet/renesas/sh_eth.h |    2 +-
 2 files changed, 10 insertions(+), 9 deletions(-)

--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -137,8 +137,9 @@ static struct sh_eth_cpu_data sh_eth_my_
 	.rmcr_value	= 0x00000001,
 
 	.tx_check	= EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
-	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE |
-			  EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI,
+	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
+			  EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE |
+			  EESR_ECI,
 	.tx_error_check	= EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE,
 
 	.apr		= 1,
@@ -252,9 +253,9 @@ static struct sh_eth_cpu_data sh_eth_my_
 	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
 
 	.tx_check	= EESR_TC1 | EESR_FTC,
-	.eesr_err_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | \
-			  EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | \
-			  EESR_ECI,
+	.eesr_err_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
+			  EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
+			  EESR_TDE | EESR_ECI,
 	.tx_error_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_TDE | \
 			  EESR_TFE,
 	.fdr_value	= 0x0000072f,
@@ -361,9 +362,9 @@ static struct sh_eth_cpu_data sh_eth_my_
 	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
 
 	.tx_check	= EESR_TC1 | EESR_FTC,
-	.eesr_err_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | \
-			  EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | \
-			  EESR_ECI,
+	.eesr_err_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
+			  EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
+			  EESR_TDE | EESR_ECI,
 	.tx_error_check	= EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_TDE | \
 			  EESR_TFE,
 
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -467,7 +467,7 @@ enum EESR_BIT {
 
 #define DEFAULT_TX_CHECK	(EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | \
 				 EESR_RTO)
-#define DEFAULT_EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | \
+#define DEFAULT_EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | \
 				 EESR_RDE | EESR_RFRMER | EESR_ADE | \
 				 EESR_TFE | EESR_TDE | EESR_ECI)
 #define DEFAULT_TX_ERROR_CHECK	(EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | \

[ 25/59] neighbour: fix a race in neigh_destroy()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <eric.dumazet@gmail.com>

[ Upstream commit c9ab4d85de222f3390c67aedc9c18a50e767531e ]

There is a race in neighbour code, because neigh_destroy() uses
skb_queue_purge(&neigh->arp_queue) without holding neighbour lock,
while other parts of the code assume neighbour rwlock is what
protects arp_queue

Convert all skb_queue_purge() calls to the __skb_queue_purge() variant

Use __skb_queue_head_init() instead of skb_queue_head_init()
to make clear we do not use arp_queue.lock

And hold neigh->lock in neigh_destroy() to close the race.

Reported-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/neighbour.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -237,7 +237,7 @@ static void neigh_flush_dev(struct neigh
 				   we must kill timers etc. and move
 				   it to safe state.
 				 */
-				skb_queue_purge(&n->arp_queue);
+				__skb_queue_purge(&n->arp_queue);
 				n->arp_queue_len_bytes = 0;
 				n->output = neigh_blackhole;
 				if (n->nud_state & NUD_VALID)
@@ -300,7 +300,7 @@ static struct neighbour *neigh_alloc(str
 	if (!n)
 		goto out_entries;
 
-	skb_queue_head_init(&n->arp_queue);
+	__skb_queue_head_init(&n->arp_queue);
 	rwlock_init(&n->lock);
 	seqlock_init(&n->ha_lock);
 	n->updated	  = n->used = now;
@@ -721,7 +721,9 @@ void neigh_destroy(struct neighbour *nei
 	if (neigh_del_timer(neigh))
 		printk(KERN_WARNING "Impossible event.\n");
 
-	skb_queue_purge(&neigh->arp_queue);
+	write_lock_bh(&neigh->lock);
+	__skb_queue_purge(&neigh->arp_queue);
+	write_unlock_bh(&neigh->lock);
 	neigh->arp_queue_len_bytes = 0;
 
 	if (dev->netdev_ops->ndo_neigh_destroy)
@@ -867,7 +869,7 @@ static void neigh_invalidate(struct neig
 		neigh->ops->error_report(neigh, skb);
 		write_lock(&neigh->lock);
 	}
-	skb_queue_purge(&neigh->arp_queue);
+	__skb_queue_purge(&neigh->arp_queue);
 	neigh->arp_queue_len_bytes = 0;
 }
 
@@ -1206,7 +1208,7 @@ int neigh_update(struct neighbour *neigh
 
 			write_lock_bh(&neigh->lock);
 		}
-		skb_queue_purge(&neigh->arp_queue);
+		__skb_queue_purge(&neigh->arp_queue);
 		neigh->arp_queue_len_bytes = 0;
 	}
 out:

[ 26/59] x25: Fix broken locking in ioctl error paths.

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Jones <davej@redhat.com>

[ Upstream commit 4ccb93ce7439b63c31bc7597bfffd13567fa483d ]

Two of the x25 ioctl cases have error paths that break out of the function without
unlocking the socket, leading to this warning:

================================================
[ BUG: lock held when returning to user space! ]
3.10.0-rc7+ #36 Not tainted
------------------------------------------------
trinity-child2/31407 is leaving the kernel with locks still held!
1 lock held by trinity-child2/31407:
 #0:  (sk_lock-AF_X25){+.+.+.}, at: [<ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25]

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/x25/af_x25.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -1586,11 +1586,11 @@ out_cud_release:
 	case SIOCX25CALLACCPTAPPRV: {
 		rc = -EINVAL;
 		lock_sock(sk);
-		if (sk->sk_state != TCP_CLOSE)
-			break;
-		clear_bit(X25_ACCPT_APPRV_FLAG, &x25->flags);
+		if (sk->sk_state == TCP_CLOSE) {
+			clear_bit(X25_ACCPT_APPRV_FLAG, &x25->flags);
+			rc = 0;
+		}
 		release_sock(sk);
-		rc = 0;
 		break;
 	}
 
@@ -1598,14 +1598,15 @@ out_cud_release:
 		rc = -EINVAL;
 		lock_sock(sk);
 		if (sk->sk_state != TCP_ESTABLISHED)
-			break;
+			goto out_sendcallaccpt_release;
 		/* must call accptapprv above */
 		if (test_bit(X25_ACCPT_APPRV_FLAG, &x25->flags))
-			break;
+			goto out_sendcallaccpt_release;
 		x25_write_internal(sk, X25_CALL_ACCEPTED);
 		x25->state = X25_STATE_3;
-		release_sock(sk);
 		rc = 0;
+out_sendcallaccpt_release:
+		release_sock(sk);
 		break;
 	}
 

[ 27/59] net: Swap ver and type in pppoe_hdr

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Changli Gao <xiaosuo@gmail.com>

[ Upstream commit b1a5a34bd0b8767ea689e68f8ea513e9710b671e ]

Ver and type in pppoe_hdr should be swapped as defined by RFC2516
section-4.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/if_pppox.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -128,11 +128,11 @@ struct pppoe_tag {
 
 struct pppoe_hdr {
 #if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 ver : 4;
 	__u8 type : 4;
+	__u8 ver : 4;
 #elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 type : 4;
 	__u8 ver : 4;
+	__u8 type : 4;
 #else
 #error	"Please fix <asm/byteorder.h>"
 #endif

[ 28/59] ipv6,mcast: always hold idev->lock before mca_lock

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amerigo Wang <amwang@redhat.com>

[ Upstream commit 8965779d2c0e6ab246c82a405236b1fb2adae6b2, with
  some bits from commit b7b1bfce0bb68bd8f6e62a28295922785cc63781
  ("ipv6: split duplicate address detection and router solicitation timer")
  to get the __ipv6_get_lladdr() used by this patch. ]

dingtianhong reported the following deadlock detected by lockdep:

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.4.24.05-0.1-default #1 Not tainted
 -------------------------------------------------------
 ksoftirqd/0/3 is trying to acquire lock:
  (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120

 but task is already holding lock:
  (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mc->mca_lock){+.+...}:
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60
        [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120
        [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60
        [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80
        [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0
        [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80
        [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20
        [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60
        [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80
        [<ffffffff813d9360>] dev_change_flags+0x40/0x70
        [<ffffffff813ea627>] do_setlink+0x237/0x8a0
        [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600
        [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310
        [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0
        [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40
        [<ffffffff81403e20>] netlink_unicast+0x140/0x180
        [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380
        [<ffffffff813c4252>] sock_sendmsg+0x112/0x130
        [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460
        [<ffffffff813c5544>] sys_sendmsg+0x44/0x70
        [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b

 -> #0 (&ndev->lock){+.+...}:
        [<ffffffff810a798e>] check_prev_add+0x3de/0x440
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f6c82>] rt_read_lock+0x42/0x60
        [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120
        [<ffffffff8149b036>] mld_newpack+0xb6/0x160
        [<ffffffff8149b18b>] add_grhead+0xab/0xc0
        [<ffffffff8149d03b>] add_grec+0x3ab/0x460
        [<ffffffff8149d14a>] mld_send_report+0x5a/0x150
        [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0
        [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0
        [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0
        [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0
        [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0
        [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210
        [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0
        [<ffffffff8106c7de>] kthread+0xae/0xc0
        [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10

actually we can just hold idev->lock before taking pmc->mca_lock,
and avoid taking idev->lock again when iterating idev->addr_list,
since the upper callers of mld_newpack() already take
read_lock_bh(&idev->lock).

Reported-by: dingtianhong <dingtianhong@huawei.com>
Cc: dingtianhong <dingtianhong@huawei.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Chen Weilong <chenweilong@huawei.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/addrconf.h |    3 +++
 net/ipv6/addrconf.c    |   28 ++++++++++++++++++----------
 net/ipv6/mcast.c       |   18 ++++++++++--------
 3 files changed, 31 insertions(+), 18 deletions(-)

--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -81,6 +81,9 @@ extern int			ipv6_dev_get_saddr(struct n
 					       const struct in6_addr *daddr,
 					       unsigned int srcprefs,
 					       struct in6_addr *saddr);
+extern int			__ipv6_get_lladdr(struct inet6_dev *idev,
+						  struct in6_addr *addr,
+						  unsigned char banned_flags);
 extern int			ipv6_get_lladdr(struct net_device *dev,
 						struct in6_addr *addr,
 						unsigned char banned_flags);
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1233,6 +1233,23 @@ try_nextdev:
 }
 EXPORT_SYMBOL(ipv6_dev_get_saddr);
 
+int __ipv6_get_lladdr(struct inet6_dev *idev, struct in6_addr *addr,
+		      unsigned char banned_flags)
+{
+	struct inet6_ifaddr *ifp;
+	int err = -EADDRNOTAVAIL;
+
+	list_for_each_entry(ifp, &idev->addr_list, if_list) {
+		if (ifp->scope == IFA_LINK &&
+		    !(ifp->flags & banned_flags)) {
+			*addr = ifp->addr;
+			err = 0;
+			break;
+		}
+	}
+	return err;
+}
+
 int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
 		    unsigned char banned_flags)
 {
@@ -1242,17 +1259,8 @@ int ipv6_get_lladdr(struct net_device *d
 	rcu_read_lock();
 	idev = __in6_dev_get(dev);
 	if (idev) {
-		struct inet6_ifaddr *ifp;
-
 		read_lock_bh(&idev->lock);
-		list_for_each_entry(ifp, &idev->addr_list, if_list) {
-			if (ifp->scope == IFA_LINK &&
-			    !(ifp->flags & banned_flags)) {
-				*addr = ifp->addr;
-				err = 0;
-				break;
-			}
-		}
+		err = __ipv6_get_lladdr(idev, addr, banned_flags);
 		read_unlock_bh(&idev->lock);
 	}
 	rcu_read_unlock();
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1334,8 +1334,9 @@ mld_scount(struct ifmcaddr6 *pmc, int ty
 	return scount;
 }
 
-static struct sk_buff *mld_newpack(struct net_device *dev, int size)
+static struct sk_buff *mld_newpack(struct inet6_dev *idev, int size)
 {
+	struct net_device *dev = idev->dev;
 	struct net *net = dev_net(dev);
 	struct sock *sk = net->ipv6.igmp_sk;
 	struct sk_buff *skb;
@@ -1360,7 +1361,7 @@ static struct sk_buff *mld_newpack(struc
 
 	skb_reserve(skb, hlen);
 
-	if (ipv6_get_lladdr(dev, &addr_buf, IFA_F_TENTATIVE)) {
+	if (__ipv6_get_lladdr(idev, &addr_buf, IFA_F_TENTATIVE)) {
 		/* <draft-ietf-magma-mld-source-05.txt>:
 		 * use unspecified address as the source address
 		 * when a valid link-local address is not available.
@@ -1456,7 +1457,7 @@ static struct sk_buff *add_grhead(struct
 	struct mld2_grec *pgr;
 
 	if (!skb)
-		skb = mld_newpack(dev, dev->mtu);
+		skb = mld_newpack(pmc->idev, dev->mtu);
 	if (!skb)
 		return NULL;
 	pgr = (struct mld2_grec *)skb_put(skb, sizeof(struct mld2_grec));
@@ -1476,7 +1477,8 @@ static struct sk_buff *add_grhead(struct
 static struct sk_buff *add_grec(struct sk_buff *skb, struct ifmcaddr6 *pmc,
 	int type, int gdeleted, int sdeleted)
 {
-	struct net_device *dev = pmc->idev->dev;
+	struct inet6_dev *idev = pmc->idev;
+	struct net_device *dev = idev->dev;
 	struct mld2_report *pmr;
 	struct mld2_grec *pgr = NULL;
 	struct ip6_sf_list *psf, *psf_next, *psf_prev, **psf_list;
@@ -1505,7 +1507,7 @@ static struct sk_buff *add_grec(struct s
 		    AVAILABLE(skb) < grec_size(pmc, type, gdeleted, sdeleted)) {
 			if (skb)
 				mld_sendpack(skb);
-			skb = mld_newpack(dev, dev->mtu);
+			skb = mld_newpack(idev, dev->mtu);
 		}
 	}
 	first = 1;
@@ -1532,7 +1534,7 @@ static struct sk_buff *add_grec(struct s
 				pgr->grec_nsrcs = htons(scount);
 			if (skb)
 				mld_sendpack(skb);
-			skb = mld_newpack(dev, dev->mtu);
+			skb = mld_newpack(idev, dev->mtu);
 			first = 1;
 			scount = 0;
 		}
@@ -1587,8 +1589,8 @@ static void mld_send_report(struct inet6
 	struct sk_buff *skb = NULL;
 	int type;
 
+	read_lock_bh(&idev->lock);
 	if (!pmc) {
-		read_lock_bh(&idev->lock);
 		for (pmc=idev->mc_list; pmc; pmc=pmc->next) {
 			if (pmc->mca_flags & MAF_NOREPORT)
 				continue;
@@ -1600,7 +1602,6 @@ static void mld_send_report(struct inet6
 			skb = add_grec(skb, pmc, type, 0, 0);
 			spin_unlock_bh(&pmc->mca_lock);
 		}
-		read_unlock_bh(&idev->lock);
 	} else {
 		spin_lock_bh(&pmc->mca_lock);
 		if (pmc->mca_sfcount[MCAST_EXCLUDE])
@@ -1610,6 +1611,7 @@ static void mld_send_report(struct inet6
 		skb = add_grec(skb, pmc, type, 0, 0);
 		spin_unlock_bh(&pmc->mca_lock);
 	}
+	read_unlock_bh(&idev->lock);
 	if (skb)
 		mld_sendpack(skb);
 }

[ 29/59] l2tp: add missing .owner to struct pppox_proto

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

[ Upstream commit e1558a93b61962710733dc8c11a2bc765607f1cd ]

Add missing .owner of struct pppox_proto. This prevents the
module from being removed from underneath its users.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/l2tp/l2tp_ppp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -1778,7 +1778,8 @@ static const struct proto_ops pppol2tp_o
 
 static const struct pppox_proto pppol2tp_proto = {
 	.create		= pppol2tp_create,
-	.ioctl		= pppol2tp_ioctl
+	.ioctl		= pppol2tp_ioctl,
+	.owner		= THIS_MODULE,
 };
 
 #ifdef CONFIG_L2TP_V3

[ 30/59] ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

[ Upstream commit 8822b64a0fa64a5dd1dfcf837c5b0be83f8c05d1 ]

We accidentally call down to ip6_push_pending_frames when uncorking
pending AF_INET data on a ipv6 socket. This results in the following
splat (from Dave Jones):

skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:126!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth
+netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c
CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37
task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000
RIP: 0010:[<ffffffff816e759c>]  [<ffffffff816e759c>] skb_panic+0x63/0x65
RSP: 0018:ffff8801e6431de8  EFLAGS: 00010282
RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006
RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520
RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800
R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800
FS:  00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Stack:
 ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4
 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6
 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0
Call Trace:
 [<ffffffff8159a9aa>] skb_push+0x3a/0x40
 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0
 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140
 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0
 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20
 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0
 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0
 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40
 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20
 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0
 [<ffffffff816f5d54>] tracesys+0xdd/0xe2
Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55
RIP  [<ffffffff816e759c>] skb_panic+0x63/0x65
 RSP <ffff8801e6431de8>

This patch adds a check if the pending data is of address family AF_INET
and directly calls udp_push_ending_frames from udp_v6_push_pending_frames
if that is the case.

This bug was found by Dave Jones with trinity.

(Also move the initialization of fl6 below the AF_INET check, even if
not strictly necessary.)

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Dave Jones <davej@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/udp.h |    1 +
 net/ipv4/udp.c    |    3 ++-
 net/ipv6/udp.c    |    7 ++++++-
 3 files changed, 9 insertions(+), 2 deletions(-)

--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -181,6 +181,7 @@ extern int udp_get_port(struct sock *sk,
 extern void udp_err(struct sk_buff *, u32);
 extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk,
 			    struct msghdr *msg, size_t len);
+extern int udp_push_pending_frames(struct sock *sk);
 extern void udp_flush_pending_frames(struct sock *sk);
 extern int udp_rcv(struct sk_buff *skb);
 extern int udp_ioctl(struct sock *sk, int cmd, unsigned long arg);
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -768,7 +768,7 @@ send:
 /*
  * Push out all pending data as one UDP datagram. Socket is locked.
  */
-static int udp_push_pending_frames(struct sock *sk)
+int udp_push_pending_frames(struct sock *sk)
 {
 	struct udp_sock  *up = udp_sk(sk);
 	struct inet_sock *inet = inet_sk(sk);
@@ -787,6 +787,7 @@ out:
 	up->pending = 0;
 	return err;
 }
+EXPORT_SYMBOL(udp_push_pending_frames);
 
 int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		size_t len)
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -895,11 +895,16 @@ static int udp_v6_push_pending_frames(st
 	struct udphdr *uh;
 	struct udp_sock  *up = udp_sk(sk);
 	struct inet_sock *inet = inet_sk(sk);
-	struct flowi6 *fl6 = &inet->cork.fl.u.ip6;
+	struct flowi6 *fl6;
 	int err = 0;
 	int is_udplite = IS_UDPLITE(sk);
 	__wsum csum = 0;
 
+	if (up->pending == AF_INET)
+		return udp_push_pending_frames(sk);
+
+	fl6 = &inet->cork.fl.u.ip6;
+
 	/* Grab the skbuff where UDP header space exists. */
 	if ((skb = skb_peek(&sk->sk_write_queue)) == NULL)
 		goto out;

[ 31/59] ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

[ Upstream commit 75a493e60ac4bbe2e977e7129d6d8cbb0dd236be ]

If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track
of this when appending the second frame on a corked socket. This results
in the following splat:

[37598.993962] ------------[ cut here ]------------
[37598.994008] kernel BUG at net/core/skbuff.c:2064!
[37598.994008] invalid opcode: 0000 [#1] SMP
[37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
+nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
+scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm
[37598.994008]  snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc
+dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
[37598.994008] CPU 0
[37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG
[37598.994008] RIP: 0010:[<ffffffff815443a5>]  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008] RSP: 0018:ffff88003670da18  EFLAGS: 00010202
[37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0
[37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00
[37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040
[37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8
[37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000
[37598.994008] FS:  00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
[37598.994008] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0
[37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0)
[37598.994008] Stack:
[37598.994008]  ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8
[37598.994008]  ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200
[37598.994008]  0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4
[37598.994008] Call Trace:
[37598.994008]  [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0
[37598.994008]  [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0
[37598.994008]  [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40
[37598.994008]  [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10
[37598.994008]  [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90
[37598.994008]  [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0
[37598.994008]  [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30
[37598.994008]  [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0
[37598.994008]  [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0
[37598.994008]  [<ffffffff8153d97d>] sys_sendto+0x12d/0x180
[37598.994008]  [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0
[37598.994008]  [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240
[37598.994008]  [<ffffffff8166a7e7>] tracesys+0xdd/0xe2
[37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48
[37598.994008] RIP  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008]  RSP <ffff88003670da18>
[37599.007323] ---[ end trace d69f6a17f8ac8eee ]---

While there, also check if path mtu discovery is activated for this
socket. The logic was adapted from ip6_append_data when first writing
on the corked socket.

This bug was introduced with commit
0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec
fragment").

v2:
a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE.
b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao
   feng, thanks!).
c) Change mtu to unsigned int, else we get a warning about
   non-matching types because of the min()-macro type-check.

Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_output.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1187,11 +1187,12 @@ static inline struct ipv6_rt_hdr *ip6_rt
 	return src ? kmemdup(src, (src->hdrlen + 1) * 8, gfp) : NULL;
 }
 
-static void ip6_append_data_mtu(int *mtu,
+static void ip6_append_data_mtu(unsigned int *mtu,
 				int *maxfraglen,
 				unsigned int fragheaderlen,
 				struct sk_buff *skb,
-				struct rt6_info *rt)
+				struct rt6_info *rt,
+				bool pmtuprobe)
 {
 	if (!(rt->dst.flags & DST_XFRM_TUNNEL)) {
 		if (skb == NULL) {
@@ -1203,7 +1204,9 @@ static void ip6_append_data_mtu(int *mtu
 			 * this fragment is not first, the headers
 			 * space is regarded as data space.
 			 */
-			*mtu = dst_mtu(rt->dst.path);
+			*mtu = min(*mtu, pmtuprobe ?
+				   rt->dst.dev->mtu :
+				   dst_mtu(rt->dst.path));
 		}
 		*maxfraglen = ((*mtu - fragheaderlen) & ~7)
 			      + fragheaderlen - sizeof(struct frag_hdr);
@@ -1220,11 +1223,10 @@ int ip6_append_data(struct sock *sk, int
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct inet_cork *cork;
 	struct sk_buff *skb, *skb_prev = NULL;
-	unsigned int maxfraglen, fragheaderlen;
+	unsigned int maxfraglen, fragheaderlen, mtu;
 	int exthdrlen;
 	int dst_exthdrlen;
 	int hh_len;
-	int mtu;
 	int copy;
 	int err;
 	int offset = 0;
@@ -1387,7 +1389,9 @@ alloc_new_skb:
 			/* update mtu and maxfraglen if necessary */
 			if (skb == NULL || skb_prev == NULL)
 				ip6_append_data_mtu(&mtu, &maxfraglen,
-						    fragheaderlen, skb, rt);
+						    fragheaderlen, skb, rt,
+						    np->pmtudisc ==
+						    IPV6_PMTUDISC_PROBE);
 
 			skb_prev = skb;
 

[ 32/59] sunvnet: vnet_port_remove must call unregister_netdev

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Kleikamp <dave.kleikamp@oracle.com>

[ Upstream commit aabb9875d02559ab9b928cd6f259a5cc4c21a589 ]

The missing call to unregister_netdev() leaves the interface active
after the driver is unloaded by rmmod.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/sunvnet.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/sun/sunvnet.c
+++ b/drivers/net/ethernet/sun/sunvnet.c
@@ -1243,6 +1243,8 @@ static int vnet_port_remove(struct vio_d
 		dev_set_drvdata(&vdev->dev, NULL);
 
 		kfree(port);
+
+		unregister_netdev(vp->dev);
 	}
 	return 0;
 }

[ 33/59] ifb: fix rcu_sched self-detected stalls

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: dingtianhong <dingtianhong@huawei.com>

[ Upstream commit 440d57bc5ff55ec1efb3efc9cbe9420b4bbdfefa ]

According to the commit 16b0dc29c1af9df341428f4c49ada4f626258082
(dummy: fix rcu_sched self-detected stalls)

Eric Dumazet fix the problem in dummy, but the ifb will occur the
same problem like the dummy modules.

Trying to "modprobe ifb numifbs=30000" triggers :

INFO: rcu_sched self-detected stall on CPU

After this splat, RTNL is locked and reboot is needed.

We must call cond_resched() to avoid this, even holding RTNL.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ifb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -291,8 +291,10 @@ static int __init ifb_init_module(void)
 	rtnl_lock();
 	err = __rtnl_link_register(&ifb_link_ops);
 
-	for (i = 0; i < numifbs && !err; i++)
+	for (i = 0; i < numifbs && !err; i++) {
 		err = ifb_init_one(i);
+		cond_resched();
+	}
 	if (err)
 		__rtnl_link_unregister(&ifb_link_ops);
 	rtnl_unlock();

[ 34/59] macvtap: correctly linearize skb when zerocopy is used

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit 61d46bf979d5cd7c164709a80ad5676a35494aae ]

Userspace may produce vectors greater than MAX_SKB_FRAGS. When we try to
linearize parts of the skb to let the rest of iov to be fit in
the frags, we need count copylen into linear when calling macvtap_alloc_skb()
instead of partly counting it into data_len. Since this breaks
zerocopy_sg_from_iovec() since its inner counter assumes nr_frags should
be zero at beginning. This cause nr_frags to be increased wrongly without
setting the correct frags.

This bug were introduced from b92946e2919134ebe2a4083e4302236295ea2a73
(macvtap: zerocopy: validate vectors before building skb).

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macvtap.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -656,6 +656,7 @@ static ssize_t macvtap_get_user(struct m
 	int vnet_hdr_len = 0;
 	int copylen = 0;
 	bool zerocopy = false;
+	size_t linear;
 
 	if (q->flags & IFF_VNET_HDR) {
 		vnet_hdr_len = q->vnet_hdr_sz;
@@ -710,11 +711,14 @@ static ssize_t macvtap_get_user(struct m
 			copylen = vnet_hdr.hdr_len;
 		if (!copylen)
 			copylen = GOODCOPY_LEN;
-	} else
+		linear = copylen;
+	} else {
 		copylen = len;
+		linear = vnet_hdr.hdr_len;
+	}
 
 	skb = macvtap_alloc_skb(&q->sk, NET_IP_ALIGN, copylen,
-				vnet_hdr.hdr_len, noblock, &err);
+				linear, noblock, &err);
 	if (!skb)
 		goto err;
 

[ 35/59] ipv6: in case of link failure remove route directly instead of letting it expire

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

[ Upstream commit 1eb4f758286884e7566627164bca4c4a16952a83 ]

We could end up expiring a route which is part of an ecmp route set. Doing
so would invalidate the rt->rt6i_nsiblings calculations and could provoke
the following panic:

[   80.144667] ------------[ cut here ]------------
[   80.145172] kernel BUG at net/ipv6/ip6_fib.c:733!
[   80.145172] invalid opcode: 0000 [#1] SMP
[   80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables
+snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk
[   80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118
[   80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   80.145172] task: ffff880117fa0000 ti: ffff880118770000 task.ti: ffff880118770000
[   80.145172] RIP: 0010:[<ffffffff815f3b5d>]  [<ffffffff815f3b5d>] fib6_add+0x75d/0x830
[   80.145172] RSP: 0018:ffff880118771798  EFLAGS: 00010202
[   80.145172] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011350e480
[   80.145172] RDX: ffff88011350e238 RSI: 0000000000000004 RDI: ffff88011350f738
[   80.145172] RBP: ffff880118771848 R08: ffff880117903280 R09: 0000000000000001
[   80.145172] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011350f680
[   80.145172] R13: ffff880117903280 R14: ffff880118771890 R15: ffff88011350ef90
[   80.145172] FS:  00007f02b5127740(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000
[   80.145172] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   80.145172] CR2: 00007f981322a000 CR3: 00000001181b1000 CR4: 00000000000006e0
[   80.145172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   80.145172] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   80.145172] Stack:
[   80.145172]  0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280
[   80.145172]  0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa
[   80.145172]  0000000000000000 0000000000000000 0000000000000000 ffff88011350f680
[   80.145172] Call Trace:
[   80.145172]  [<ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90
[   80.145172]  [<ffffffff815ed985>] __ip6_ins_rt+0x45/0x70
[   80.145172]  [<ffffffff815eee35>] ip6_ins_rt+0x35/0x40
[   80.145172]  [<ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0
[   80.145172]  [<ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30
[   80.145172]  [<ffffffff81616077>] fib6_rule_action+0xd7/0x210
[   80.145172]  [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30
[   80.145172]  [<ffffffff81553026>] fib_rules_lookup+0xc6/0x140
[   80.145172]  [<ffffffff81616374>] fib6_rule_lookup+0x44/0x80
[   80.145172]  [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30
[   80.145172]  [<ffffffff815edea3>] ip6_route_output+0x73/0xb0
[   80.145172]  [<ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0
[   80.145172]  [<ffffffff813007b1>] ? list_del+0x11/0x40
[   80.145172]  [<ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50
[   80.145172]  [<ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0
[   80.145172]  [<ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20
[   80.145172]  [<ffffffff815a8a83>] inet_sendmsg+0x63/0xb0
[   80.145172]  [<ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30
[   80.145172]  [<ffffffff815218d6>] sock_sendmsg+0xa6/0xd0
[   80.145172]  [<ffffffff81524a68>] SYSC_sendto+0x128/0x180
[   80.145172]  [<ffffffff8109825c>] ? update_curr+0xec/0x170
[   80.145172]  [<ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10
[   80.145172]  [<ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0
[   80.145172]  [<ffffffff8152509e>] SyS_sendto+0xe/0x10
[   80.145172]  [<ffffffff8164efd9>] system_call_fastpath+0x16/0x1b
[   80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53
[   80.145172] RIP  [<ffffffff815f3b5d>] fib6_add+0x75d/0x830
[   80.145172]  RSP <ffff880118771798>
[   80.387413] ---[ end trace 02f20b7a8b81ed95 ]---
[   80.390154] Kernel panic - not syncing: Fatal exception in interrupt

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/route.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1032,10 +1032,13 @@ static void ip6_link_failure(struct sk_b
 
 	rt = (struct rt6_info *) skb_dst(skb);
 	if (rt) {
-		if (rt->rt6i_flags & RTF_CACHE)
-			rt6_update_expires(rt, 0);
-		else if (rt->rt6i_node && (rt->rt6i_flags & RTF_DEFAULT))
+		if (rt->rt6i_flags & RTF_CACHE) {
+			dst_hold(&rt->dst);
+			if (ip6_del_rt(rt))
+				dst_free(&rt->dst);
+		} else if (rt->rt6i_node && (rt->rt6i_flags & RTF_DEFAULT)) {
 			rt->rt6i_node->fn_sernum = -1;
+		}
 	}
 }
 

[ 36/59] 9p: fix off by one causing access violations and memory corruption

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit 110ecd69a9feea82a152bbf9b12aba57e6396883 ]

p9_release_pages() would attempt to dereference one value past the end of
pages[]. This would cause the following crashes:

[ 6293.171817] BUG: unable to handle kernel paging request at ffff8807c96f3000
[ 6293.174146] IP: [<ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.176447] PGD 79c5067 PUD 82c1e3067 PMD 82c197067 PTE 80000007c96f3060
[ 6293.180060] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 6293.180060] Modules linked in:
[ 6293.180060] CPU: 62 PID: 174043 Comm: modprobe Tainted: G        W    3.10.0-next-20130710-sasha #3954
[ 6293.180060] task: ffff8807b803b000 ti: ffff880787dde000 task.ti: ffff880787dde000
[ 6293.180060] RIP: 0010:[<ffffffff8412793b>]  [<ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.214316] RSP: 0000:ffff880787ddfc28  EFLAGS: 00010202
[ 6293.214316] RAX: 0000000000000001 RBX: ffff8807c96f2ff8 RCX: 0000000000000000
[ 6293.222017] RDX: ffff8807b803b000 RSI: 0000000000000001 RDI: ffffea001c7e3d40
[ 6293.222017] RBP: ffff880787ddfc48 R08: 0000000000000000 R09: 0000000000000000
[ 6293.222017] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001
[ 6293.222017] R13: 0000000000000001 R14: ffff8807cc50c070 R15: ffff8807cc50c070
[ 6293.222017] FS:  00007f572641d700(0000) GS:ffff8807f3600000(0000) knlGS:0000000000000000
[ 6293.256784] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 6293.256784] CR2: ffff8807c96f3000 CR3: 00000007c8e81000 CR4: 00000000000006e0
[ 6293.256784] Stack:
[ 6293.256784]  ffff880787ddfcc8 ffff880787ddfcc8 0000000000000000 ffff880787ddfcc8
[ 6293.256784]  ffff880787ddfd48 ffffffff84128be8 ffff880700000002 0000000000000001
[ 6293.256784]  ffff8807b803b000 ffff880787ddfce0 0000100000000000 0000000000000000
[ 6293.256784] Call Trace:
[ 6293.256784]  [<ffffffff84128be8>] p9_virtio_zc_request+0x598/0x630
[ 6293.256784]  [<ffffffff8115c610>] ? wake_up_bit+0x40/0x40
[ 6293.256784]  [<ffffffff841209b1>] p9_client_zc_rpc+0x111/0x3a0
[ 6293.256784]  [<ffffffff81174b78>] ? sched_clock_cpu+0x108/0x120
[ 6293.256784]  [<ffffffff84122a21>] p9_client_read+0xe1/0x2c0
[ 6293.256784]  [<ffffffff81708a90>] v9fs_file_read+0x90/0xc0
[ 6293.256784]  [<ffffffff812bd073>] vfs_read+0xc3/0x130
[ 6293.256784]  [<ffffffff811a78bd>] ? trace_hardirqs_on+0xd/0x10
[ 6293.256784]  [<ffffffff812bd5a2>] SyS_read+0x62/0xa0
[ 6293.256784]  [<ffffffff841a1a00>] tracesys+0xdd/0xe2
[ 6293.256784] Code: 66 90 48 89 fb 41 89 f5 48 8b 3f 48 85 ff 74 29 85 f6 74 25 45 31 e4 66 0f 1f 84 00 00 00 00 00 e8 eb 14 12 fd 41 ff c4 49 63 c4 <48> 8b 3c c3 48 85 ff 74 05 45 39 e5 75 e7 48 83 c4 08 5b 41 5c
[ 6293.256784] RIP  [<ffffffff8412793b>] p9_release_pages+0x3b/0x60
[ 6293.256784]  RSP <ffff880787ddfc28>
[ 6293.256784] CR2: ffff8807c96f3000
[ 6293.256784] ---[ end trace 50822ee72cd360fc ]---

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/9p/trans_common.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/net/9p/trans_common.c
+++ b/net/9p/trans_common.c
@@ -24,11 +24,11 @@
  */
 void p9_release_pages(struct page **pages, int nr_pages)
 {
-	int i = 0;
-	while (pages[i] && nr_pages--) {
-		put_page(pages[i]);
-		i++;
-	}
+	int i;
+
+	for (i = 0; i < nr_pages; i++)
+		if (pages[i])
+			put_page(pages[i]);
 }
 EXPORT_SYMBOL(p9_release_pages);
 

[ 37/59] dummy: fix oops when loading the dummy failed

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: dingtianhong <dingtianhong@huawei.com>

[ Upstream commit 2c8a01894a12665d8059fad8f0a293c98a264121 ]

We rename the dummy in modprobe.conf like this:

install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy
install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy

We got oops when we run the command:

modprobe dummy0
modprobe dummy1

------------[ cut here ]------------

[ 3302.187584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 3302.195411] IP: [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.201844] PGD 85c94a067 PUD 8517bd067 PMD 0
[ 3302.206305] Oops: 0002 [#1] SMP
[ 3302.299737] task: ffff88105ccea300 ti: ffff880eba4a0000 task.ti: ffff880eba4a0000
[ 3302.307186] RIP: 0010:[<ffffffff813fe62a>]  [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.316044] RSP: 0018:ffff880eba4a1dd8  EFLAGS: 00010246
[ 3302.321332] RAX: 0000000000000000 RBX: ffffffff81a9d738 RCX: 0000000000000002
[ 3302.328436] RDX: 0000000000000000 RSI: ffffffffa04d602c RDI: ffff880eba4a1dd8
[ 3302.335541] RBP: ffff880eba4a1e18 R08: dead000000200200 R09: dead000000100100
[ 3302.342644] R10: 0000000000000080 R11: 0000000000000003 R12: ffffffff81a9d788
[ 3302.349748] R13: ffffffffa04d7020 R14: ffffffff81a9d670 R15: ffff880eba4a1dd8
[ 3302.364910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3302.370630] CR2: 0000000000000008 CR3: 000000085e15e000 CR4: 00000000000427e0
[ 3302.377734] DR0: 0000000000000003 DR1: 00000000000000b0 DR2: 0000000000000001
[ 3302.384838] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3302.391940] Stack:
[ 3302.393944]  ffff880eba4a1dd8 ffff880eba4a1dd8 ffff880eba4a1e18 ffffffffa04d70c0
[ 3302.401350]  00000000ffffffef ffffffffa01a8000 0000000000000000 ffffffff816111c8
[ 3302.408758]  ffff880eba4a1e48 ffffffffa01a80be ffff880eba4a1e48 ffffffffa04d70c0
[ 3302.416164] Call Trace:
[ 3302.418605]  [<ffffffffa01a8000>] ? 0xffffffffa01a7fff
[ 3302.423727]  [<ffffffffa01a80be>] dummy_init_module+0xbe/0x1000 [dummy0]
[ 3302.430405]  [<ffffffffa01a8000>] ? 0xffffffffa01a7fff
[ 3302.435535]  [<ffffffff81000322>] do_one_initcall+0x152/0x1b0
[ 3302.441263]  [<ffffffff810ab24b>] do_init_module+0x7b/0x200
[ 3302.446824]  [<ffffffff810ad3d2>] load_module+0x4e2/0x530
[ 3302.452215]  [<ffffffff8127ae40>] ? ddebug_dyndbg_boot_param_cb+0x60/0x60
[ 3302.458979]  [<ffffffff810ad5f1>] SyS_init_module+0xd1/0x130
[ 3302.464627]  [<ffffffff814b9652>] system_call_fastpath+0x16/0x1b
[ 3302.490090] RIP  [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.496607]  RSP <ffff880eba4a1dd8>
[ 3302.500084] CR2: 0000000000000008
[ 3302.503466] ---[ end trace 8342d49cd49f78ed ]---

The reason is that when loading dummy, if __rtnl_link_register() return failed,
the init_module should return and avoid take the wrong path.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dummy.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -186,6 +186,8 @@ static int __init dummy_init_module(void
 
 	rtnl_lock();
 	err = __rtnl_link_register(&dummy_link_ops);
+	if (err < 0)
+		goto out;
 
 	for (i = 0; i < numdummies && !err; i++) {
 		err = dummy_init_one();
@@ -193,6 +195,8 @@ static int __init dummy_init_module(void
 	}
 	if (err < 0)
 		__rtnl_link_unregister(&dummy_link_ops);
+
+out:
 	rtnl_unlock();
 
 	return err;

[ 38/59] ifb: fix oops when loading the ifb failed

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: dingtianhong <dingtianhong@huawei.com>

[ Upstream commit f2966cd5691058b8674a20766525bedeaea9cbcf ]

If __rtnl_link_register() return faild when loading the ifb, it will
take the wrong path and get oops, so fix it just like dummy.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ifb.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -290,6 +290,8 @@ static int __init ifb_init_module(void)
 
 	rtnl_lock();
 	err = __rtnl_link_register(&ifb_link_ops);
+	if (err < 0)
+		goto out;
 
 	for (i = 0; i < numifbs && !err; i++) {
 		err = ifb_init_one(i);
@@ -297,6 +299,8 @@ static int __init ifb_init_module(void)
 	}
 	if (err)
 		__rtnl_link_unregister(&ifb_link_ops);
+
+out:
 	rtnl_unlock();
 
 	return err;

[ 39/59] atl1e: fix dma mapping warnings

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neil Horman <nhorman@tuxdriver.com>

[ Upstream commit 352900b583b2852152a1e05ea0e8b579292e731e ]

Recently had this backtrace reported:
WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930()
Hardware name: System Product Name
ATL1E 0000:02:00.0: DMA-API: device driver failed to check map error[device
address=0x00000000cbfd1000] [size=90 bytes] [mapped as single]
Modules linked in: xt_conntrack nf_conntrack ebtable_filter ebtables
ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek iTCO_wdt
iTCO_vendor_support snd_hda_intel acpi_cpufreq mperf coretemp btrfs zlib_deflate
snd_hda_codec snd_hwdep microcode raid6_pq libcrc32c snd_seq usblp serio_raw xor
snd_seq_device joydev snd_pcm snd_page_alloc snd_timer snd lpc_ich i2c_i801
soundcore mfd_core atl1e asus_atk0110 ata_generic pata_acpi radeon i2c_algo_bit
drm_kms_helper ttm drm i2c_core pata_marvell uinput
Pid: 314, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.3.fc19.x86_64 #1
Call Trace:
 <IRQ>  [<ffffffff81069106>] warn_slowpath_common+0x66/0x80
 [<ffffffff8106916c>] warn_slowpath_fmt+0x4c/0x50
 [<ffffffff8138151d>] check_unmap+0x47d/0x930
 [<ffffffff810ad048>] ? sched_clock_cpu+0xa8/0x100
 [<ffffffff81381a2f>] debug_dma_unmap_page+0x5f/0x70
 [<ffffffff8137ce30>] ? unmap_single+0x20/0x30
 [<ffffffffa01569a1>] atl1e_intr+0x3a1/0x5b0 [atl1e]
 [<ffffffff810d53fd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff81119636>] handle_irq_event_percpu+0x56/0x390
 [<ffffffff811199ad>] handle_irq_event+0x3d/0x60
 [<ffffffff8111cb6a>] handle_fasteoi_irq+0x5a/0x100
 [<ffffffff8101c36f>] handle_irq+0xbf/0x150
 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50
 [<ffffffff81073b10>] ? irq_enter+0x50/0xa0
 [<ffffffff8172738d>] do_IRQ+0x4d/0xc0
 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50
 [<ffffffff8171c6b2>] common_interrupt+0x72/0x72
 <EOI>  [<ffffffff810db5b2>] ? lock_release+0xc2/0x310
 [<ffffffff8109ea04>] lg_local_unlock_cpu+0x24/0x50
 [<ffffffff811dcb2f>] file_sb_list_del+0x3f/0x50
 [<ffffffff811dcb6d>] fput+0x2d/0xc0
 [<ffffffff811d8ea1>] filp_close+0x61/0x90
 [<ffffffff811fae4d>] __close_fd+0x8d/0x150
 [<ffffffff811d8ef0>] sys_close+0x20/0x50
 [<ffffffff81725699>] system_call_fastpath+0x16/0x1b

The usual straighforward failure to check for dma_mapping_error after a map
operation is completed.

This patch should fix it, the reporter wandered off after filing this bz:
https://bugzilla.redhat.com/show_bug.cgi?id=954170

and I don't have hardware to test, but the fix is pretty straightforward, so I
figured I'd post it for review.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c |   28 +++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -1688,8 +1688,8 @@ check_sum:
 	return 0;
 }
 
-static void atl1e_tx_map(struct atl1e_adapter *adapter,
-		      struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
+static int atl1e_tx_map(struct atl1e_adapter *adapter,
+			struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
 {
 	struct atl1e_tpd_desc *use_tpd = NULL;
 	struct atl1e_tx_buffer *tx_buffer = NULL;
@@ -1700,6 +1700,7 @@ static void atl1e_tx_map(struct atl1e_ad
 	u16 nr_frags;
 	u16 f;
 	int segment;
+	int ring_start = adapter->tx_ring.next_to_use;
 
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	segment = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
@@ -1712,6 +1713,9 @@ static void atl1e_tx_map(struct atl1e_ad
 		tx_buffer->length = map_len;
 		tx_buffer->dma = pci_map_single(adapter->pdev,
 					skb->data, hdr_len, PCI_DMA_TODEVICE);
+		if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma))
+			return -ENOSPC;
+
 		ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
 		mapped_len += map_len;
 		use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
@@ -1738,6 +1742,13 @@ static void atl1e_tx_map(struct atl1e_ad
 		tx_buffer->dma =
 			pci_map_single(adapter->pdev, skb->data + mapped_len,
 					map_len, PCI_DMA_TODEVICE);
+
+		if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
+			/* Reset the tx rings next pointer */
+			adapter->tx_ring.next_to_use = ring_start;
+			return -ENOSPC;
+		}
+
 		ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
 		mapped_len  += map_len;
 		use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
@@ -1773,6 +1784,13 @@ static void atl1e_tx_map(struct atl1e_ad
 							  (i * MAX_TX_BUF_LEN),
 							  tx_buffer->length,
 							  DMA_TO_DEVICE);
+
+			if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
+				/* Reset the ring next to use pointer */
+				adapter->tx_ring.next_to_use = ring_start;
+				return -ENOSPC;
+			}
+
 			ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_PAGE);
 			use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
 			use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
@@ -1790,6 +1808,7 @@ static void atl1e_tx_map(struct atl1e_ad
 	/* The last buffer info contain the skb address,
 	   so it will be free after unmap */
 	tx_buffer->skb = skb;
+	return 0;
 }
 
 static void atl1e_tx_queue(struct atl1e_adapter *adapter, u16 count,
@@ -1857,10 +1876,13 @@ static netdev_tx_t atl1e_xmit_frame(stru
 		return NETDEV_TX_OK;
 	}
 
-	atl1e_tx_map(adapter, skb, tpd);
+	if (atl1e_tx_map(adapter, skb, tpd))
+		goto out;
+
 	atl1e_tx_queue(adapter, tpd_req, tpd);
 
 	netdev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
+out:
 	spin_unlock_irqrestore(&adapter->tx_lock, flags);
 	return NETDEV_TX_OK;
 }

[ 40/59] atl1e: unmap partially mapped skb on dma error and free skb

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neil Horman <nhorman@tuxdriver.com>

[ Upstream commit 584ec4355355ffac43571b02a314d43eb2f7fcbf ]

Ben Hutchings pointed out that my recent update to atl1e
in commit 352900b583b2852152a1e05ea0e8b579292e731e
("atl1e: fix dma mapping warnings") was missing a bit of code.

Specifically it reset the hardware tx ring to its origional state when
we hit a dma error, but didn't unmap any exiting mappings from the
operation.  This patch fixes that up.  It also remembers to free the
skb in the event that an error occurs, so we don't leak.  Untested, as
I don't have hardware.  I think its pretty straightforward, but please
review closely.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c |   24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -1701,6 +1701,7 @@ static int atl1e_tx_map(struct atl1e_ada
 	u16 f;
 	int segment;
 	int ring_start = adapter->tx_ring.next_to_use;
+	int ring_end;
 
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	segment = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
@@ -1744,6 +1745,15 @@ static int atl1e_tx_map(struct atl1e_ada
 					map_len, PCI_DMA_TODEVICE);
 
 		if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
+			/* We need to unwind the mappings we've done */
+			ring_end = adapter->tx_ring.next_to_use;
+			adapter->tx_ring.next_to_use = ring_start;
+			while (adapter->tx_ring.next_to_use != ring_end) {
+				tpd = atl1e_get_tpd(adapter);
+				tx_buffer = atl1e_get_tx_buffer(adapter, tpd);
+				pci_unmap_single(adapter->pdev, tx_buffer->dma,
+						 tx_buffer->length, PCI_DMA_TODEVICE);
+			}
 			/* Reset the tx rings next pointer */
 			adapter->tx_ring.next_to_use = ring_start;
 			return -ENOSPC;
@@ -1786,6 +1796,16 @@ static int atl1e_tx_map(struct atl1e_ada
 							  DMA_TO_DEVICE);
 
 			if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
+				/* We need to unwind the mappings we've done */
+				ring_end = adapter->tx_ring.next_to_use;
+				adapter->tx_ring.next_to_use = ring_start;
+				while (adapter->tx_ring.next_to_use != ring_end) {
+					tpd = atl1e_get_tpd(adapter);
+					tx_buffer = atl1e_get_tx_buffer(adapter, tpd);
+					dma_unmap_page(&adapter->pdev->dev, tx_buffer->dma,
+						       tx_buffer->length, DMA_TO_DEVICE);
+				}
+
 				/* Reset the ring next to use pointer */
 				adapter->tx_ring.next_to_use = ring_start;
 				return -ENOSPC;
@@ -1876,8 +1896,10 @@ static netdev_tx_t atl1e_xmit_frame(stru
 		return NETDEV_TX_OK;
 	}
 
-	if (atl1e_tx_map(adapter, skb, tpd))
+	if (atl1e_tx_map(adapter, skb, tpd)) {
+		dev_kfree_skb_any(skb);
 		goto out;
+	}
 
 	atl1e_tx_queue(adapter, tpd_req, tpd);
 

[ 41/59] vlan: fix a race in egress prio management

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 3e3aac497513c669e1c62c71e1d552ea85c1d974 ]

egress_priority_map[] hash table updates are protected by rtnl,
and we never remove elements until device is dismantled.

We have to make sure that before inserting an new element in hash table,
all its fields are committed to memory or else another cpu could
find corrupt values and crash.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/8021q/vlan_dev.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -73,6 +73,8 @@ vlan_dev_get_egress_qos_mask(struct net_
 {
 	struct vlan_priority_tci_mapping *mp;
 
+	smp_rmb(); /* coupled with smp_wmb() in vlan_dev_set_egress_priority() */
+
 	mp = vlan_dev_priv(dev)->egress_priority_map[(skb->priority & 0xF)];
 	while (mp) {
 		if (mp->priority == skb->priority) {
@@ -235,6 +237,11 @@ int vlan_dev_set_egress_priority(const s
 	np->next = mp;
 	np->priority = skb_prio;
 	np->vlan_qos = vlan_qos;
+	/* Before inserting this element in hash table, make sure all its fields
+	 * are committed to memory.
+	 * coupled with smp_rmb() in vlan_dev_get_egress_qos_mask()
+	 */
+	smp_wmb();
 	vlan->egress_priority_map[skb_prio & 0xF] = np;
 	if (vlan_qos)
 		vlan->nr_egress_mappings++;

[ 42/59] writeback: Fix periodic writeback after fs mount

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit a5faeaf9109578e65e1a32e2a3e76c8b47e7dcb6 upstream.

Code in blkdev.c moves a device inode to default_backing_dev_info when
the last reference to the device is put and moves the device inode back
to its bdi when the first reference is acquired. This includes moving to
wb.b_dirty list if the device inode is dirty. The code however doesn't
setup timer to wake corresponding flusher thread and while wb.b_dirty
list is non-empty __mark_inode_dirty() will not set it up either. Thus
periodic writeback is effectively disabled until a sync(2) call which can
lead to unexpected data loss in case of crash or power failure.

Fix the problem by setting up a timer for periodic writeback in case we
add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi().

Reported-by: Bert De Jonghe <Bert.DeJonghe@amplidata.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/block_dev.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -57,17 +57,24 @@ static void bdev_inode_switch_bdi(struct
 			struct backing_dev_info *dst)
 {
 	struct backing_dev_info *old = inode->i_data.backing_dev_info;
+	bool wakeup_bdi = false;
 
 	if (unlikely(dst == old))		/* deadlock avoidance */
 		return;
 	bdi_lock_two(&old->wb, &dst->wb);
 	spin_lock(&inode->i_lock);
 	inode->i_data.backing_dev_info = dst;
-	if (inode->i_state & I_DIRTY)
+	if (inode->i_state & I_DIRTY) {
+		if (bdi_cap_writeback_dirty(dst) && !wb_has_dirty_io(&dst->wb))
+			wakeup_bdi = true;
 		list_move(&inode->i_wb_list, &dst->wb.b_dirty);
+	}
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&old->wb.list_lock);
 	spin_unlock(&dst->wb.list_lock);
+
+	if (wakeup_bdi)
+		bdi_wakeup_thread_delayed(dst);
 }
 
 sector_t blkdev_max_block(struct block_device *bdev)

[ 43/59] SCSI: megaraid_sas: fix memory leak if SGL has zero length entries

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 7a6a731bd00ca90d0e250867c3b9c05b5ff0fa49 upstream.

commit 98cb7e44 ([SCSI] megaraid_sas: Sanity check user
supplied length before passing it to dma_alloc_coherent())
introduced a memory leak.  Memory allocated for entries
following zero length SGL entries will not be freed.

Reference: http://bugs.debian.org/688198

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/megaraid/megaraid_sas_base.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4817,10 +4817,12 @@ megasas_mgmt_fw_ioctl(struct megasas_ins
 				    sense, sense_handle);
 	}
 
-	for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
-		dma_free_coherent(&instance->pdev->dev,
-				    kern_sge32[i].length,
-				    kbuff_arr[i], kern_sge32[i].phys_addr);
+	for (i = 0; i < ioc->sge_count; i++) {
+		if (kbuff_arr[i])
+			dma_free_coherent(&instance->pdev->dev,
+					  kern_sge32[i].length,
+					  kbuff_arr[i],
+					  kern_sge32[i].phys_addr);
 	}
 
 	megasas_return_cmd(instance, cmd);

[ 44/59] SCSI: Fix incorrect memset in bnx2fc_parse_fcp_rsp

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andi Kleen <andi@firstfloor.org>

commit 16da05b1158d1bcb31656e636a8736a663b1cf1f upstream.

gcc 4.8 warns because the memset only clears sizeof(char *) bytes, not
the whole buffer. Use the correct buffer size and clear the whole sense
buffer.

/backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c: In
function 'bnx2fc_parse_fcp_rsp':
/backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c:1810:41:
warning: argument to 'sizeof' in 'memset' call is the same expression as
the destination; did you mean to provide an explicit length?
[-Wsizeof-pointer-memaccess]
   memset(sc_cmd->sense_buffer, 0, sizeof(sc_cmd->sense_buffer));
                                         ^

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/bnx2fc/bnx2fc_io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1786,7 +1786,7 @@ static void bnx2fc_parse_fcp_rsp(struct
 			fcp_sns_len = SCSI_SENSE_BUFFERSIZE;
 		}
 
-		memset(sc_cmd->sense_buffer, 0, sizeof(sc_cmd->sense_buffer));
+		memset(sc_cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 		if (fcp_sns_len)
 			memcpy(sc_cmd->sense_buffer, rq_data, fcp_sns_len);
 

[ 45/59] [SCSI] zfcp: block queue limits with data router

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Maier <maier@linux.vnet.ibm.com>

commit 5fea4291deacd80188b996d2f555fc6a1940e5d4 upstream.

Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564
"[SCSI] zfcp: support for hardware data router"
reduced the initial block queue limits in the scsi_host_template to the
absolute minimum and adjusted them later on. However, the adjustment was
too late for the BSG devices of Scsi_Host and fc_host.

Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a
BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result,
users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return
with error HBA_STATUS_ERROR.

Initialize the block queue limits in zfcp_scsi_host_template to the
greatest common denominator (GCD).

While we cannot exploit the slightly enlarged maximum request size with
data router, this should be neglectible. Doing so also avoids running into
trouble after live guest relocation (LGR) / migration from a data router
FCP device to an FCP device that does not support data router. In that
case, zfcp would figure out the new limits on adapter recovery, but the
fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and
now too large queue limits.

It should also OK, not to use half the size as in the DIX case, because
fc_host and Scsi_Host do not transport FCP requests including SCSI commands
using protection data.

[Backported for 3.4-stable. commit a53c8fa since v3.6-rc1 unified
copyright messages, e.g: revise such messages 'Copyright IBM Corporation'
as 'Copyright IBM Corp', so updated the messages as a53c8fa did. - zliu]

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Zhouping Liu <zliu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/s390/scsi/zfcp_scsi.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -3,7 +3,7 @@
  *
  * Interface to Linux SCSI midlayer.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -311,8 +311,12 @@ static struct scsi_host_template zfcp_sc
 	.proc_name		 = "zfcp",
 	.can_queue		 = 4096,
 	.this_id		 = -1,
-	.sg_tablesize		 = 1, /* adjusted later */
-	.max_sectors		 = 8, /* adjusted later */
+	.sg_tablesize		 = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
+				     * ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2),
+				   /* GCD, adjusted later */
+	.max_sectors		 = (((QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
+				     * ZFCP_QDIO_MAX_SBALS_PER_REQ) - 2) * 8,
+				   /* GCD, adjusted later */
 	.dma_boundary		 = ZFCP_QDIO_SBALE_LEN - 1,
 	.cmd_per_lun		 = 1,
 	.use_clustering		 = 1,

[ 46/59] usb: serial: option: blacklist ONDA MT689DC QMI interface

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Enrico Mioso <mrkiko.rs@gmail.com>

commit 3d1a69e726406ab662ab88fa30a3a05ed404334d upstream.

Prevent the option driver from binding itself to the QMI/WWAN interface, making
it unusable by the proper driver.

Signed-off-by: enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -832,7 +832,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },

[ 47/59] usb: option: add TP-LINK MA260

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 94190301ffa059c2d127b3a67ec5d161d5c62681 upstream.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1355,6 +1355,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) },	/* D-Link DWM-156 (variant) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) },	/* D-Link DWM-156 (variant) */

[ 48/59] usb: serial: option: add Olivetti Olicard 200

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dcbw@redhat.com>

commit 4cf76df06ecc852633ed927d91e01c83c33bc331 upstream.

Speaks AT on interfaces 5 (command & PPP) and 3 (secondary), other
interface protocols are unknown.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -347,6 +347,7 @@ static void option_instat_callback(struc
 #define OLIVETTI_VENDOR_ID			0x0b3c
 #define OLIVETTI_PRODUCT_OLICARD100		0xc000
 #define OLIVETTI_PRODUCT_OLICARD145		0xc003
+#define OLIVETTI_PRODUCT_OLICARD200		0xc005
 
 /* Celot products */
 #define CELOT_VENDOR_ID				0x211f
@@ -1279,6 +1280,7 @@ static const struct usb_device_id option
 
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/

[ 49/59] usb: serial: option.c: remove ONDA MT825UP product ID fromdriver

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Enrico Mioso <mrkiko.rs@gmail.com>

commit 878c69aae986ae97084458c0183a8c0a059865b1 upstream.

Some (very few) early devices like mine, where not exposting a proper CDC
descriptor. This was fixed with an immediate firmware update from the vendor,
and pre-installed on newer devices.
So actual devices can be driven by cdc_acm.c + cdc_ether.c.

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    7 -------
 1 file changed, 7 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -353,12 +353,6 @@ static void option_instat_callback(struc
 #define CELOT_VENDOR_ID				0x211f
 #define CELOT_PRODUCT_CT680M			0x6801
 
-/* ONDA Communication vendor id */
-#define ONDA_VENDOR_ID       0x1ee8
-
-/* ONDA MT825UP HSDPA 14.2 modem */
-#define ONDA_MT825UP         0x000b
-
 /* Samsung products */
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889
@@ -1282,7 +1276,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },

[ 50/59] USB: option: append Petatel NP10T device to GSM modems list

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniil Bolsun <dan.bolsun@gmail.com>

commit c38e83b6cc2adf80e3f091fd92cfbeacc9748347 upstream.

This patch was tested on 3.10.1 kernel.

Same models of Petatel NP10T modems have different device IDs.
Unfortunately they have no additional revision information on a board
which may treat them as different devices. Currently I've seen only
two NP10T devices with various IDs. Possibly Petatel NP10T list will
be appended upon devices with new IDs will appear.

Signed-off-by: Daniil Bolsun <dan.bolsun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -445,7 +445,8 @@ static void option_instat_callback(struc
 
 /* Hyundai Petatel Inc. products */
 #define PETATEL_VENDOR_ID			0x1ff4
-#define PETATEL_PRODUCT_NP10T			0x600e
+#define PETATEL_PRODUCT_NP10T_600A		0x600a
+#define PETATEL_PRODUCT_NP10T_600E		0x600e
 
 /* TP-LINK Incorporated products */
 #define TPLINK_VENDOR_ID			0x2357
@@ -1347,7 +1348,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
-	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */

[ 51/59] USB: option: add D-Link DWM-152/C1 and DWM-156/C1

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Alexandr \\\"Sky\\\" Ivanov" <alexandr.sky@gmail.com>

commit ca24763588844b14f019ffc45c7df6d9e8f932c5 upstream.

Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices.

DWM-152/C1:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07d1 ProdID=3e01 Rev= 0.00
S:  Product=USB Configuration
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

DWM-156/C1:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07d1 ProdID=3e02 Rev= 0.00
S:  Product=DataCard Device
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1361,6 +1361,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

[ 52/59] usb: serial: option: Add ONYX 3G device support

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Enrico Mioso <mrkiko.rs@gmail.com>

commit 63b5df963f52ccbab6fabedf05b7ac6b465789a4 upstream.

This patch adds support for the ONYX 3G device (version 1) from ALFA
NETWORK.

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -793,6 +793,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },

[ 53/59] usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Angelo Daros de Luca <luizluca@gmail.com>

commit 90625070c4253377025878c4e82feed8b35c7116 upstream.

This adds NetGear Managed Switch M4100 series, M5300 series, M7100 series
USB ID (0846:0110) to the cp210x driver. Without this, the serial
adapter is not recognized in Linux. Description was obtained from
an Netgear Eng.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -60,6 +60,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
 	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */

[ 54/59] USB: cp210x: add MMB and PI ZigBee USB Device Support

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sami Rahman <sami.rahman@mmbresearch.com>

commit 7681156982026ebf7eafd7301eb0374d7648d068 upstream.

Added support for MMB Networks and Planet Innovation Ingeni ZigBee USB
devices using customized Silicon Labs' CP210x.c USB to UART bridge
drivers with PIDs: 88A4, 88A5.

Signed-off-by: Sami Rahman <sami.rahman@mmbresearch.com>
Tested-by: Sami Rahman <sami.rahman@mmbresearch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -125,6 +125,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */

[ 55/59] usb: cp210x support SEL C662 Vendor/Device

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Barry Grussling <barry@grussling.com>

commit b579fa52f6be0b4157ca9cc5e94d44a2c89a7e95 upstream.

This patch adds support for the Schweitzer Engineering Laboratories
C662 USB cable based off the CP210x driver.

Signed-off-by: Barry Grussling <barry@grussling.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -157,6 +157,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */

[ 56/59] lockd: protect nlm_blocked access in nlmsvc_retry_blocked

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Jeffery <djeffery@redhat.com>

commit 1c327d962fc420aea046c16215a552710bde8231 upstream.

In nlmsvc_retry_blocked, the check that the list is non-empty and acquiring
the pointer of the first entry is unprotected by any lock.  This allows a rare
race condition when there is only one entry on the list.  A function such as
nlmsvc_grant_callback() can be called, which will temporarily remove the entry
from the list.  Between the list_empty() and list_entry(),the list may become
empty, causing an invalid pointer to be used as an nlm_block, leading to a
possible crash.

This patch adds the nlm_block_lock around these calls to prevent concurrent
use of the nlm_blocked list.

This was a regression introduced by
f904be9cc77f361d37d71468b13ff3d1a1823dea  "lockd: Mostly remove BKL from
the server".

Signed-off-by: David Jeffery <djeffery@redhat.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/svclock.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -941,6 +941,7 @@ nlmsvc_retry_blocked(void)
 	unsigned long	timeout = MAX_SCHEDULE_TIMEOUT;
 	struct nlm_block *block;
 
+	spin_lock(&nlm_blocked_lock);
 	while (!list_empty(&nlm_blocked) && !kthread_should_stop()) {
 		block = list_entry(nlm_blocked.next, struct nlm_block, b_list);
 
@@ -950,6 +951,7 @@ nlmsvc_retry_blocked(void)
 			timeout = block->b_when - jiffies;
 			break;
 		}
+		spin_unlock(&nlm_blocked_lock);
 
 		dprintk("nlmsvc_retry_blocked(%p, when=%ld)\n",
 			block, block->b_when);
@@ -959,7 +961,9 @@ nlmsvc_retry_blocked(void)
 			retry_deferred_block(block);
 		} else
 			nlmsvc_grant_blocked(block);
+		spin_lock(&nlm_blocked_lock);
 	}
+	spin_unlock(&nlm_blocked_lock);
 
 	return timeout;
 }

[ 57/59] tracing: Fix irqs-off tag display in syscall tracing

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com>

commit 11034ae9c20f4057a6127fc965906417978e69b2 upstream.

All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't
disable irqs.

 [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
 [root@jovi tracing]# cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 13/13   #P:2
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-513   [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-513   [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
         sendmail-771   [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6)

The reason is syscall tracing doesn't record irq_flags into buffer.
The proper display is:

 [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
 [root@jovi tracing]# cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 14/14   #P:2
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-514   [001] ....    46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-514   [001] ....    46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
            <...>-920   [001] ....    47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0)

Link: http://lkml.kernel.org/r/1365564393-10972-3-git-send-email-jovi.zhangwei@huawei.com

Cc: stable@vger.kernel.org # 2.6.35
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace_syscalls.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -305,6 +305,8 @@ void ftrace_syscall_enter(void *ignore,
 	struct ring_buffer *buffer;
 	int size;
 	int syscall_nr;
+	unsigned long irq_flags;
+	int pc;
 
 	syscall_nr = syscall_get_nr(current, regs);
 	if (syscall_nr < 0)
@@ -318,8 +320,11 @@ void ftrace_syscall_enter(void *ignore,
 
 	size = sizeof(*entry) + sizeof(unsigned long) * sys_data->nb_args;
 
+	local_save_flags(irq_flags);
+	pc = preempt_count();
+
 	event = trace_current_buffer_lock_reserve(&buffer,
-			sys_data->enter_event->event.type, size, 0, 0);
+			sys_data->enter_event->event.type, size, irq_flags, pc);
 	if (!event)
 		return;
 
@@ -329,7 +334,8 @@ void ftrace_syscall_enter(void *ignore,
 
 	if (!filter_current_check_discard(buffer, sys_data->enter_event,
 					  entry, event))
-		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
+		trace_current_buffer_unlock_commit(buffer, event,
+						   irq_flags, pc);
 }
 
 void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)
@@ -339,6 +345,8 @@ void ftrace_syscall_exit(void *ignore, s
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
 	int syscall_nr;
+	unsigned long irq_flags;
+	int pc;
 
 	syscall_nr = syscall_get_nr(current, regs);
 	if (syscall_nr < 0)
@@ -351,7 +359,8 @@ void ftrace_syscall_exit(void *ignore, s
 		return;
 
 	event = trace_current_buffer_lock_reserve(&buffer,
-			sys_data->exit_event->event.type, sizeof(*entry), 0, 0);
+			sys_data->exit_event->event.type, sizeof(*entry),
+			irq_flags, pc);
 	if (!event)
 		return;
 
@@ -361,7 +370,8 @@ void ftrace_syscall_exit(void *ignore, s
 
 	if (!filter_current_check_discard(buffer, sys_data->exit_event,
 					  entry, event))
-		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
+		trace_current_buffer_unlock_commit(buffer, event,
+						   irq_flags, pc);
 }
 
 int reg_event_syscall_enter(struct ftrace_event_call *call)

[ 58/59] hrtimers: Move SMP function call to thread context

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 5ec2481b7b47a4005bb446d176e5d0257400c77d upstream.

smp_call_function_* must not be called from softirq context.

But clock_was_set() which calls on_each_cpu() is called from softirq
context to implement a delayed clock_was_set() for the timer interrupt
handler. Though that almost never gets invoked. A recent change in the
resume code uses the softirq based delayed clock_was_set to support
Xens resume mechanism.

linux-next contains a new warning which warns if smp_call_function_*
is called from softirq context which gets triggered by that Xen
change.

Fix this by moving the delayed clock_was_set() call to a work context.

Reported-and-tested-by: Artem Savkov <artem.savkov@gmail.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>,
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: xen-devel@lists.xen.org
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/hrtimer.c |   28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -707,17 +707,20 @@ static int hrtimer_switch_to_hres(void)
 	return 1;
 }
 
+static void clock_was_set_work(struct work_struct *work)
+{
+	clock_was_set();
+}
+
+static DECLARE_WORK(hrtimer_work, clock_was_set_work);
+
 /*
- * Called from timekeeping code to reprogramm the hrtimer interrupt
- * device. If called from the timer interrupt context we defer it to
- * softirq context.
+ * Called from timekeeping and resume code to reprogramm the hrtimer
+ * interrupt device on all cpus.
  */
 void clock_was_set_delayed(void)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
-
-	cpu_base->clock_was_set = 1;
-	__raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+	schedule_work(&hrtimer_work);
 }
 
 #else
@@ -766,8 +769,10 @@ void hrtimers_resume(void)
 	WARN_ONCE(!irqs_disabled(),
 		  KERN_INFO "hrtimers_resume() called with IRQs enabled!");
 
+	/* Retrigger on the local CPU */
 	retrigger_next_event(NULL);
-	timerfd_clock_was_set();
+	/* And schedule a retrigger for all others */
+	clock_was_set_delayed();
 }
 
 static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
@@ -1416,13 +1421,6 @@ void hrtimer_peek_ahead_timers(void)
 
 static void run_hrtimer_softirq(struct softirq_action *h)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
-
-	if (cpu_base->clock_was_set) {
-		cpu_base->clock_was_set = 0;
-		clock_was_set();
-	}
-
 	hrtimer_peek_ahead_timers();
 }
 

[ 59/59] ALSA: usb-audio: 6fire: return correct XRUN indication

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eldad Zack <eldad@fogrefinery.com>

commit be2f93a4c4981b3646b6f98f477154411b8516cb upstream.

Return SNDRV_PCM_POS_XRUN (snd_pcm_uframes_t) instead of
SNDRV_PCM_STATE_XRUN (snd_pcm_state_t) from the pointer
function of 6fire, as expected by snd_pcm_update_hw_ptr0().

Caught by sparse.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/6fire/pcm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/6fire/pcm.c
+++ b/sound/usb/6fire/pcm.c
@@ -540,7 +540,7 @@ static snd_pcm_uframes_t usb6fire_pcm_po
 	snd_pcm_uframes_t ret;
 
 	if (rt->panic || !sub)
-		return SNDRV_PCM_STATE_XRUN;
+		return SNDRV_PCM_POS_XRUN;
 
 	spin_lock_irqsave(&sub->lock, flags);
 	ret = sub->dma_off;

Re: [ 00/59] 3.4.55-stable review

[linux]

Quoting Greg Kroah-Hartman <gregkh@linuxfoundation.org>:

> This is the start of the stable review cycle for the 3.4.55 release.
> There are 59 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jul 28 20:48:22 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.55-rc1.gz
> and the diffstat can be found below.
>
Cross platform build looks good:

Total builds: 58 Total: build errors: 8

Details:  
http://desktop.roeck-us.net/buildlogs/v3.4.54-59-g956f996.2013-07-27.08:29:14

Guenter

Re: [ 15/59] sparc32: vm_area_struct access for old Sun SPARCs.

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 752 bytes --]

On Fri, 2013-07-26 at 13:52 -0700, Greg Kroah-Hartman wrote:
> 3.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Olivier DANET <odanet@caramail.com>
[...]

This, and the other SPARC fixes for 3.4 and 3.0, are missing upstream
commit references, which should be:

[SPARC] sparc32: vm_area_struct access for old Sun SPARCs.
commit 961246b4ed8da3bcf4ee1eb9147f341013553e3c upstream.

sparc64 address-congruence property
commit 771a37ff4d80b80db3b0df3e7696f14b298c67b7 upstream.

sparc: tsb must be flushed before tlb
commit 23a01138efe216f8084cfaa74b0b90dd4b097441 upstream.

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 15/59] sparc32: vm_area_struct access for old Sun SPARCs.

[David Miller]

From: Ben Hutchings <ben@decadent.org.uk>
Date: Sat, 27 Jul 2013 22:45:08 +0100

> On Fri, 2013-07-26 at 13:52 -0700, Greg Kroah-Hartman wrote:
>> 3.4-stable review patch.  If anyone has any objections, please let me know.
>> 
>> ------------------
>> 
>> From: Olivier DANET <odanet@caramail.com>
> [...]
> 
> This, and the other SPARC fixes for 3.4 and 3.0, are missing upstream
> commit references, which should be:
> 
> [SPARC] sparc32: vm_area_struct access for old Sun SPARCs.
> commit 961246b4ed8da3bcf4ee1eb9147f341013553e3c upstream.
> 
> sparc64 address-congruence property
> commit 771a37ff4d80b80db3b0df3e7696f14b298c67b7 upstream.
> 
> sparc: tsb must be flushed before tlb
> commit 23a01138efe216f8084cfaa74b0b90dd4b097441 upstream.

Sorry, I forgot the upstream commit tags on these Sparc bits.
:-/

Re: [ 15/59] sparc32: vm_area_struct access for old Sun SPARCs.

[Greg KH]

On Sat, Jul 27, 2013 at 07:27:25PM -0700, David Miller wrote:
> From: Ben Hutchings <ben@decadent.org.uk>
> Date: Sat, 27 Jul 2013 22:45:08 +0100
> 
> > On Fri, 2013-07-26 at 13:52 -0700, Greg Kroah-Hartman wrote:
> >> 3.4-stable review patch.  If anyone has any objections, please let me know.
> >> 
> >> ------------------
> >> 
> >> From: Olivier DANET <odanet@caramail.com>
> > [...]
> > 
> > This, and the other SPARC fixes for 3.4 and 3.0, are missing upstream
> > commit references, which should be:
> > 
> > [SPARC] sparc32: vm_area_struct access for old Sun SPARCs.
> > commit 961246b4ed8da3bcf4ee1eb9147f341013553e3c upstream.
> > 
> > sparc64 address-congruence property
> > commit 771a37ff4d80b80db3b0df3e7696f14b298c67b7 upstream.
> > 
> > sparc: tsb must be flushed before tlb
> > commit 23a01138efe216f8084cfaa74b0b90dd4b097441 upstream.
> 
> Sorry, I forgot the upstream commit tags on these Sparc bits.
> :-/

No worries, I should have noticed this before, thanks Ben for pointing
them out.  I've fixed them all up in my tree now.

greg k-h