[ 00/60] 3.10.7-stable review

[ 00/60] 3.10.7-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.10.7 release.
There are 60 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Aug 15 06:33:14 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.10.7-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.10.7-rc1

Markos Chandras <markos.chandras@imgtec.com>
    MIPS: Expose missing pci_io{map,unmap} declarations

Arnd Bergmann <arnd@arndb.de>
    mtd: omap2: allow bulding as a module

Arnd Bergmann <arnd@arndb.de>
    SCSI: nsp32: use mdelay instead of large udelay constants

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: always program the MC on startup

Christian König <christian.koenig@amd.com>
    drm/radeon: only save UVD bo when we have open handles

Christian König <christian.koenig@amd.com>
    drm/radeon: fix halting UVD

Jani Nikula <jani.nikula@linux.intel.com>
    drm/i915: initialize gt_lock early with other spin locks

Al Viro <viro@zeniv.linux.org.uk>
    reiserfs: fix deadlock in umount

Oleg Nesterov <oleg@redhat.com>
    debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs)

Julius Werner <jwerner@chromium.org>
    usb: core: don't try to reset_device() a port that got just disconnected

Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
    zram: allow request end to coincide with disksize

Jeff Layton <jlayton@redhat.com>
    cifs: don't instantiate new dentries in readdir for inodes that need to be revalidated immediately

Chen Gang <gang.chen@asianux.com>
    cifs: extend the buffer length enought for sprintf() using

Theodore Ts'o <tytso@mit.edu>
    ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT

Piotr Sarna <p.sarna@partner.samsung.com>
    ext4: fix mount/remount error messages for incompatible mount options

Theodore Ts'o <tytso@mit.edu>
    ext4: allow the mount options nodelalloc and data=journal

Christian König <christian.koenig@amd.com>
    drm/radeon: stop sending invalid UVD destroy msg

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: select audio dto based on encoder id for DCE3

Michel Dänzer <michel.daenzer@amd.com>
    drm: Don't pass negative delta to ktime_sub_ns()

Dave Airlie <airlied@redhat.com>
    drm/ast: invalidate page tables when pinning a BO

Egbert Eich <eich@suse.com>
    drm/mgag200: Invalidate page tables when pinning a BO

Michal Srb <msrb@suse.com>
    drm/cirrus: Invalidate page tables when pinning a BO

Amit Shah <amit.shah@redhat.com>
    virtio: console: return -ENODEV on all read operations after unplug

Amit Shah <amit.shah@redhat.com>
    virtio: console: fix raising SIGIO after port unplug

Amit Shah <amit.shah@redhat.com>
    virtio: console: clean up port data immediately at time of unplug

Amit Shah <amit.shah@redhat.com>
    virtio: console: fix race in port_fops_open() and port unplug

Amit Shah <amit.shah@redhat.com>
    virtio: console: fix race with port unplug and open/close

Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
    virtio/console: Add pipe_lock/unlock for splice_write

Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
    virtio/console: Quit from splice_write if pipe->nrbufs is 0

Trond Myklebust <Trond.Myklebust@netapp.com>
    SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister

Trond Myklebust <Trond.Myklebust@netapp.com>
    SUNRPC: Don't auto-disconnect from the local rpcbind socket

Trond Myklebust <Trond.Myklebust@netapp.com>
    LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs

Josef Bacik <jbacik@fusionio.com>
    Btrfs: release both paths before logging dir/changed extents

Jussi Kivilinna <jussi.kivilinna@iki.fi>
    ALSA: 6fire: fix DMA issues with URB transfer_buffer usage

Clemens Ladisch <clemens@ladisch.de>
    ALSA: usb-audio: do not trust too-big wMaxPacketSize values

Alexander Z Lam <azl@google.com>
    tracing: Fix reset of time stamps during trace_clock changes

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    tracing: Use flag buffer_disabled for irqsoff tracer

Alexander Z Lam <azl@google.com>
    tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer

Andrew Vagin <avagin@openvz.org>
    tracing: Fix fields of struct trace_iterator that are zeroed by mistake

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI / PM: Walk physical_node_list under physical_node_lock

Viresh Kumar <viresh.kumar@linaro.org>
    cpufreq: rename ignore_nice as ignore_nice_load

Aaro Koskinen <aaro.koskinen@iki.fi>
    cpufreq: loongson2: fix regression related to clock management

Fabio Estevam <fabio.estevam@freescale.com>
    i2c: i2c-mxs: Use DMA mode even for small transfers

Alban Browaeys <alban.browaeys@gmail.com>
    media: em28xx: fix assignment of the eeprom data

Piotr Sarna <p.sarna@partner.samsung.com>
    staging: zcache: fix "zcache=" kernel parameter

Curt Brune <curt@cumulusnetworks.com>
    hwmon: (adt7470) Fix incorrect return code check

Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
    regmap: Add missing header for !CONFIG_REGMAP stubs

Lars-Peter Clausen <lars@metafoo.de>
    regmap: cache: Make sure to sync the last register in a block

Theodore Ts'o <tytso@mit.edu>
    ext4: fix retry handling in ext4_ext_truncate()

Theodore Ts'o <tytso@mit.edu>
    ext4: make sure group number is bumped after a inode allocation race

Eric Sandeen <sandeen@redhat.com>
    ext4: destroy ext4_es_cachep on module unload

Michael Neuling <mikey@neuling.org>
    powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs

Michael Neuling <mikey@neuling.org>
    powerpc: Save the TAR register earlier

Michael Neuling <mikey@neuling.org>
    powerpc: Fix context switch DSCR on POWER8

Michael Neuling <mikey@neuling.org>
    powerpc: Rework setting up H/FSCR bit definitions

Michael Neuling <mikey@neuling.org>
    powerpc: Fix hypervisor facility unavaliable vector number

Anton Blanchard <anton@samba.org>
    powerpc: On POWERNV enable PPC_DENORMALISATION by default

Asias He <asias@redhat.com>
    virtio-scsi: Fix virtqueue affinity setup

Sumit.Saxena@lsi.com <Sumit.Saxena@lsi.com>
    SCSI: megaraid_sas: megaraid_sas driver init fails in kdump kernel

Martin K. Petersen <martin.petersen@oracle.com>
    SCSI: Don't attempt to send extended INQUIRY command if skip_vpd_pages is set


-------------

Diffstat:

 Makefile                                  |   4 +-
 arch/mips/Kconfig                         |   2 +-
 arch/mips/include/asm/io.h                |   5 ++
 arch/powerpc/Kconfig                      |   2 +-
 arch/powerpc/include/asm/processor.h      |   4 +
 arch/powerpc/include/asm/reg.h            |  31 +++++---
 arch/powerpc/include/asm/switch_to.h      |   9 +++
 arch/powerpc/kernel/asm-offsets.c         |   3 +
 arch/powerpc/kernel/entry_64.S            |  36 ++++++---
 arch/powerpc/kernel/exceptions-64s.S      |   5 +-
 arch/powerpc/kernel/process.c             |  10 +++
 arch/powerpc/kernel/tm.S                  |  20 +++++
 arch/powerpc/kernel/traps.c               |  58 ++++++++------
 drivers/acpi/proc.c                       |   8 ++
 drivers/base/regmap/regcache.c            |   3 +-
 drivers/char/virtio_console.c             |  70 +++++++++++-----
 drivers/cpufreq/cpufreq_conservative.c    |  20 ++---
 drivers/cpufreq/cpufreq_governor.c        |   8 +-
 drivers/cpufreq/cpufreq_governor.h        |   4 +-
 drivers/cpufreq/cpufreq_ondemand.c        |  20 ++---
 drivers/cpufreq/loongson2_cpufreq.c       |  11 +--
 drivers/gpu/drm/ast/ast_ttm.c             |   1 +
 drivers/gpu/drm/cirrus/cirrus_ttm.c       |   1 +
 drivers/gpu/drm/drm_irq.c                 |   5 +-
 drivers/gpu/drm/i915/i915_dma.c           |   1 +
 drivers/gpu/drm/i915/intel_pm.c           |   2 -
 drivers/gpu/drm/mgag200/mgag200_ttm.c     |   1 +
 drivers/gpu/drm/radeon/evergreen.c        |   6 +-
 drivers/gpu/drm/radeon/ni.c               |   6 +-
 drivers/gpu/drm/radeon/r600.c             |  31 ++++++--
 drivers/gpu/drm/radeon/r600_hdmi.c        |  12 ++-
 drivers/gpu/drm/radeon/radeon.h           |   2 +-
 drivers/gpu/drm/radeon/radeon_asic.h      |   2 +-
 drivers/gpu/drm/radeon/radeon_fence.c     |   2 +-
 drivers/gpu/drm/radeon/radeon_uvd.c       |  50 ++++++++----
 drivers/gpu/drm/radeon/rv770.c            |   7 +-
 drivers/gpu/drm/radeon/si.c               |   9 ++-
 drivers/hwmon/adt7470.c                   |   2 +-
 drivers/i2c/busses/i2c-mxs.c              |   2 +-
 drivers/media/usb/em28xx/em28xx-i2c.c     |   2 +-
 drivers/mtd/nand/Kconfig                  |   2 +-
 drivers/scsi/megaraid/megaraid_sas_base.c |  20 +++--
 drivers/scsi/nsp32.c                      |   2 +-
 drivers/scsi/scsi.c                       |   3 +
 drivers/scsi/virtio_scsi.c                |   2 +-
 drivers/staging/zcache/zcache-main.c      |   6 +-
 drivers/staging/zram/zram_drv.c           |   2 +-
 drivers/usb/core/hub.c                    |   5 +-
 fs/btrfs/tree-log.c                       |   5 +-
 fs/cifs/cifsencrypt.c                     |   2 +-
 fs/cifs/cifsglob.h                        |   1 +
 fs/cifs/connect.c                         |   7 +-
 fs/cifs/readdir.c                         |   8 ++
 fs/cifs/sess.c                            |   6 +-
 fs/debugfs/inode.c                        |  69 +++++-----------
 fs/ext4/extents.c                         |   2 +-
 fs/ext4/ialloc.c                          |  10 +--
 fs/ext4/ioctl.c                           |   6 +-
 fs/ext4/super.c                           |  20 ++++-
 fs/lockd/clntlock.c                       |  13 ++-
 fs/lockd/clntproc.c                       |   5 +-
 fs/reiserfs/procfs.c                      |  99 +++++------------------
 fs/reiserfs/super.c                       |   3 +-
 include/linux/ftrace_event.h              |  10 ++-
 include/linux/regmap.h                    |   1 +
 include/linux/sunrpc/sched.h              |   1 +
 kernel/trace/trace.c                      | 128 ++++++++++++++++++++----------
 kernel/trace/trace_irqsoff.c              |   4 +-
 net/sunrpc/clnt.c                         |   4 +
 net/sunrpc/netns.h                        |   1 +
 net/sunrpc/rpcb_clnt.c                    |  48 ++++++++---
 sound/usb/6fire/comm.c                    |  38 +++++++--
 sound/usb/6fire/comm.h                    |   2 +-
 sound/usb/endpoint.c                      |  13 ++-
 74 files changed, 634 insertions(+), 391 deletions(-)

[ 01/60] SCSI: Dont attempt to send extended INQUIRY command if skip_vpd_pages is set

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Martin K. Petersen" <martin.petersen@oracle.com>

commit 7562523e84ddc742fe1f9db8bd76b01acca89f6b upstream.

If a device has the skip_vpd_pages flag set we should simply fail the
scsi_get_vpd_page() call.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Stuart Foster <smf.linux@ntlworld.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1031,6 +1031,9 @@ int scsi_get_vpd_page(struct scsi_device
 {
 	int i, result;
 
+	if (sdev->skip_vpd_pages)
+		goto fail;
+
 	/* Ask for all the pages supported by this device */
 	result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
 	if (result)

[ 02/60] SCSI: megaraid_sas: megaraid_sas driver init fails in kdump kernel

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Sumit.Saxena@lsi.com" <Sumit.Saxena@lsi.com>

commit 6431f5d7c6025f8b007af06ea090de308f7e6881 upstream.

Problem: When Hardware IOMMU is on, megaraid_sas driver initialization fails
in kdump kernel with LSI MegaRAID controller(device id-0x73).

Actually this issue needs fix in firmware, but for firmware running in field,
this driver fix is proposed to resolve the issue.  At firmware initialization
time, if firmware does not come to ready state, driver will reset the adapter
and retry for firmware transition to ready state unconditionally(not only
executed for kdump kernel).

Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com>
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/megaraid/megaraid_sas_base.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3508,11 +3508,21 @@ static int megasas_init_fw(struct megasa
 		break;
 	}
 
-	/*
-	 * We expect the FW state to be READY
-	 */
-	if (megasas_transition_to_ready(instance, 0))
-		goto fail_ready_state;
+	if (megasas_transition_to_ready(instance, 0)) {
+		atomic_set(&instance->fw_reset_no_pci_access, 1);
+		instance->instancet->adp_reset
+			(instance, instance->reg_set);
+		atomic_set(&instance->fw_reset_no_pci_access, 0);
+		dev_info(&instance->pdev->dev,
+			"megasas: FW restarted successfully from %s!\n",
+			__func__);
+
+		/*waitting for about 30 second before retry*/
+		ssleep(30);
+
+		if (megasas_transition_to_ready(instance, 0))
+			goto fail_ready_state;
+	}
 
 	/* Check if MSI-X is supported while in ready state */
 	msix_enable = (instance->instancet->read_fw_status_reg(reg_set) &

[ 03/60] virtio-scsi: Fix virtqueue affinity setup

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Asias He <asias@redhat.com>

commit aa52aeea2725839bdd3dcce394486e9a043065e0 upstream.

vscsi->num_queues counts the number of request virtqueue which does not
include the control and event virtqueue. It is wrong to subtract
VIRTIO_SCSI_VQ_BASE from vscsi->num_queues.

This patch fixes the following panic.

(qemu) device_del scsi0

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
 IP: [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120
 PGD 0
 Oops: 0000 [#1] SMP
 Modules linked in:
 CPU: 0 PID: 659 Comm: kworker/0:1 Not tainted 3.11.0-rc2+ #1172
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 Workqueue: kacpi_hotplug _handle_hotplug_event_func
 task: ffff88007bee1cc0 ti: ffff88007bfe4000 task.ti: ffff88007bfe4000
 RIP: 0010:[<ffffffff8179b29f>]  [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120
 RSP: 0018:ffff88007bfe5a38  EFLAGS: 00010202
 RAX: 0000000000000010 RBX: ffff880077fd0d28 RCX: 0000000000000050
 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000
 RBP: ffff88007bfe5a58 R08: ffff880077f6ff00 R09: 0000000000000001
 R10: ffffffff8143e673 R11: 0000000000000001 R12: 0000000000000001
 R13: ffff880077fd0800 R14: 0000000000000000 R15: ffff88007bf489b0
 FS:  0000000000000000(0000) GS:ffff88007ea00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000020 CR3: 0000000079f8b000 CR4: 00000000000006f0
 Stack:
  ffff880077fd0d28 0000000000000000 ffff880077fd0800 0000000000000008
  ffff88007bfe5a78 ffffffff8179b37d ffff88007bccc800 ffff88007bccc800
  ffff88007bfe5a98 ffffffff8179b3b6 ffff88007bccc800 ffff880077fd0d28
 Call Trace:
  [<ffffffff8179b37d>] virtscsi_set_affinity+0x2d/0x40
  [<ffffffff8179b3b6>] virtscsi_remove_vqs+0x26/0x50
  [<ffffffff8179c7d2>] virtscsi_remove+0x82/0xa0
  [<ffffffff814cb6b2>] virtio_dev_remove+0x22/0x70
  [<ffffffff8167ca49>] __device_release_driver+0x69/0xd0
  [<ffffffff8167cb9d>] device_release_driver+0x2d/0x40
  [<ffffffff8167bb96>] bus_remove_device+0x116/0x150
  [<ffffffff81679936>] device_del+0x126/0x1e0
  [<ffffffff81679a06>] device_unregister+0x16/0x30
  [<ffffffff814cb889>] unregister_virtio_device+0x19/0x30
  [<ffffffff814cdad6>] virtio_pci_remove+0x36/0x80
  [<ffffffff81464ae7>] pci_device_remove+0x37/0x70
  [<ffffffff8167ca49>] __device_release_driver+0x69/0xd0
  [<ffffffff8167cb9d>] device_release_driver+0x2d/0x40
  [<ffffffff8167bb96>] bus_remove_device+0x116/0x150
  [<ffffffff81679936>] device_del+0x126/0x1e0
  [<ffffffff8145edfc>] pci_stop_bus_device+0x9c/0xb0
  [<ffffffff8145f036>] pci_stop_and_remove_bus_device+0x16/0x30
  [<ffffffff81474a9e>] acpiphp_disable_slot+0x8e/0x150
  [<ffffffff81474f6a>] hotplug_event_func+0xba/0x1a0
  [<ffffffff814906c8>] ? acpi_os_release_object+0xe/0x12
  [<ffffffff81475911>] _handle_hotplug_event_func+0x31/0x70
  [<ffffffff810b5333>] process_one_work+0x183/0x500
  [<ffffffff810b66e2>] worker_thread+0x122/0x400
  [<ffffffff810b65c0>] ? manage_workers+0x2d0/0x2d0
  [<ffffffff810bc5de>] kthread+0xce/0xe0
  [<ffffffff810bc510>] ? kthread_freezable_should_stop+0x70/0x70
  [<ffffffff81ca045c>] ret_from_fork+0x7c/0xb0
  [<ffffffff810bc510>] ? kthread_freezable_should_stop+0x70/0x70
 Code: 01 00 00 00 74 59 45 31 e4 83 bb c8 01 00 00 02 74 46 66 2e 0f 1f 84 00 00 00 00 00 49 63 c4 48 c1 e0 04 48 8b bc 0
3 10 02 00 00 <48> 8b 47 20 48 8b 80 d0 01 00 00 48 8b 40 50 48 85 c0 74 07 be
 RIP  [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120
  RSP <ffff88007bfe5a38>
 CR2: 0000000000000020
 ---[ end trace 99679331a3775f48 ]---

Signed-off-by: Asias He <asias@redhat.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/virtio_scsi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -751,7 +751,7 @@ static void __virtscsi_set_affinity(stru
 
 		vscsi->affinity_hint_set = true;
 	} else {
-		for (i = 0; i < vscsi->num_queues - VIRTIO_SCSI_VQ_BASE; i++)
+		for (i = 0; i < vscsi->num_queues; i++)
 			virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1);
 
 		vscsi->affinity_hint_set = false;

[ 04/60] powerpc: On POWERNV enable PPC_DENORMALISATION by default

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 4e90a2a7375e86827541bda9393414c03e7721c6 upstream.

We want PPC_DENORMALISATION enabled when POWERNV is enabled,
so update the Kconfig.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -572,7 +572,7 @@ config SCHED_SMT
 config PPC_DENORMALISATION
 	bool "PowerPC denormalisation exception handling"
 	depends on PPC_BOOK3S_64
-	default "n"
+	default "y" if PPC_POWERNV
 	---help---
 	  Add support for handling denormalisation of single precision
 	  values.  Useful for bare metal only.  If unsure say Y here.

[ 05/60] powerpc: Fix hypervisor facility unavaliable vector number

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Neuling <mikey@neuling.org>

commit 88f094120bd2f012ff494ae50a8d4e0d8af8f69e upstream.

Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we
mark it as an OS facility unavaliable (0xf60) as the two share the same code
path.

The becomes a problem in facility_unavailable_exception() as we aren't able to
see the hypervisor facility unavailable exceptions.

Below fixes this by duplication the required macros.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/exceptions-64s.S |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -848,7 +848,7 @@ hv_facility_unavailable_relon_trampoline
 	. = 0x4f80
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	facility_unavailable_relon_hv
+	b	hv_facility_unavailable_relon_hv
 
 	STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
 #ifdef CONFIG_PPC_DENORMALISATION
@@ -1175,6 +1175,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	b	.ret_from_except
 
 	STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
+	STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
 
 	.align	7
 	.globl	__end_handlers
@@ -1188,7 +1189,7 @@ __end_handlers:
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
-	STD_RELON_EXCEPTION_HV_OOL(0xf80, facility_unavailable)
+	STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable)
 
 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*

[ 06/60] powerpc: Rework setting up H/FSCR bit definitions

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Neuling <mikey@neuling.org>

commit 74e400cee6c0266ba2d940ed78d981f1e24a8167 upstream.

This reworks the Facility Status and Control Regsiter (FSCR) config bit
definitions so that we can access the bit numbers.  This is needed for a
subsequent patch to fix the userspace DSCR handling.

HFSCR and FSCR bit definitions are the same, so reuse them.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/reg.h |   31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -254,19 +254,28 @@
 #define SPRN_HRMOR	0x139	/* Real mode offset register */
 #define SPRN_HSRR0	0x13A	/* Hypervisor Save/Restore 0 */
 #define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
+/* HFSCR and FSCR bit numbers are the same */
+#define FSCR_TAR_LG	8	/* Enable Target Address Register */
+#define FSCR_EBB_LG	7	/* Enable Event Based Branching */
+#define FSCR_TM_LG	5	/* Enable Transactional Memory */
+#define FSCR_PM_LG	4	/* Enable prob/priv access to PMU SPRs */
+#define FSCR_BHRB_LG	3	/* Enable Branch History Rolling Buffer*/
+#define FSCR_DSCR_LG	2	/* Enable Data Stream Control Register */
+#define FSCR_VECVSX_LG	1	/* Enable VMX/VSX  */
+#define FSCR_FP_LG	0	/* Enable Floating Point */
 #define SPRN_FSCR	0x099	/* Facility Status & Control Register */
-#define   FSCR_TAR	(1 << (63-55)) /* Enable Target Address Register */
-#define   FSCR_EBB	(1 << (63-56)) /* Enable Event Based Branching */
-#define   FSCR_DSCR	(1 << (63-61)) /* Enable Data Stream Control Register */
+#define   FSCR_TAR	__MASK(FSCR_TAR_LG)
+#define   FSCR_EBB	__MASK(FSCR_EBB_LG)
+#define   FSCR_DSCR	__MASK(FSCR_DSCR_LG)
 #define SPRN_HFSCR	0xbe	/* HV=1 Facility Status & Control Register */
-#define   HFSCR_TAR	(1 << (63-55)) /* Enable Target Address Register */
-#define   HFSCR_EBB	(1 << (63-56)) /* Enable Event Based Branching */
-#define   HFSCR_TM	(1 << (63-58)) /* Enable Transactional Memory */
-#define   HFSCR_PM	(1 << (63-60)) /* Enable prob/priv access to PMU SPRs */
-#define   HFSCR_BHRB	(1 << (63-59)) /* Enable Branch History Rolling Buffer*/
-#define   HFSCR_DSCR	(1 << (63-61)) /* Enable Data Stream Control Register */
-#define   HFSCR_VECVSX	(1 << (63-62)) /* Enable VMX/VSX  */
-#define   HFSCR_FP	(1 << (63-63)) /* Enable Floating Point */
+#define   HFSCR_TAR	__MASK(FSCR_TAR_LG)
+#define   HFSCR_EBB	__MASK(FSCR_EBB_LG)
+#define   HFSCR_TM	__MASK(FSCR_TM_LG)
+#define   HFSCR_PM	__MASK(FSCR_PM_LG)
+#define   HFSCR_BHRB	__MASK(FSCR_BHRB_LG)
+#define   HFSCR_DSCR	__MASK(FSCR_DSCR_LG)
+#define   HFSCR_VECVSX	__MASK(FSCR_VECVSX_LG)
+#define   HFSCR_FP	__MASK(FSCR_FP_LG)
 #define SPRN_TAR	0x32f	/* Target Address Register */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
 #define   LPCR_VPM0	(1ul << (63-0))

[ 07/60] powerpc: Fix context switch DSCR on POWER8

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Neuling <mikey@neuling.org>

commit 2517617e0de65f8f7cfe75cae745d06b1fa98586 upstream.

POWER8 allows the DSCR to be accessed directly from userspace via a new SPR
number 0x3 (Rather than 0x11.  DSCR SPR number 0x11 is still used on POWER8 but
like POWER7, is only accessible in HV and OS modes).  Currently, we allow this
by setting H/FSCR DSCR bit on boot.

Unfortunately this doesn't work, as the kernel needs to see the DSCR change so
that it knows to no longer restore the system wide version of DSCR on context
switch (ie. to set thread.dscr_inherit).

This clears the H/FSCR DSCR bit initially.  If a process then accesses the DSCR
(via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in
facility_unavailable_exception().

We also change _switch() so that we set or clear the H/FSCR DSCR bit based on
the thread.dscr_inherit.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/entry_64.S |   27 ++++++++++++++++++-
 arch/powerpc/kernel/traps.c    |   58 ++++++++++++++++++++++++-----------------
 2 files changed, 60 insertions(+), 25 deletions(-)

--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -584,9 +584,34 @@ BEGIN_FTR_SECTION
 	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
 	cmpwi	r6,0
+	li	r8, FSCR_DSCR
 	bne	1f
 	ld	r0,0(r7)
-1:	cmpd	r0,r25
+	b	3f
+1:
+  BEGIN_FTR_SECTION_NESTED(70)
+	mfspr	r6, SPRN_FSCR
+	or	r6, r6, r8
+	mtspr	SPRN_FSCR, r6
+    BEGIN_FTR_SECTION_NESTED(69)
+	mfspr	r6, SPRN_HFSCR
+	or	r6, r6, r8
+	mtspr	SPRN_HFSCR, r6
+    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
+	b	4f
+  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+3:
+  BEGIN_FTR_SECTION_NESTED(70)
+	mfspr	r6, SPRN_FSCR
+	andc	r6, r6, r8
+	mtspr	SPRN_FSCR, r6
+    BEGIN_FTR_SECTION_NESTED(69)
+	mfspr	r6, SPRN_HFSCR
+	andc	r6, r6, r8
+	mtspr	SPRN_HFSCR, r6
+    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
+  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+4:	cmpd	r0,r25
 	beq	2f
 	mtspr	SPRN_DSCR,r0
 2:
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -44,9 +44,7 @@
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include <asm/pmc.h>
-#ifdef CONFIG_PPC32
 #include <asm/reg.h>
-#endif
 #ifdef CONFIG_PMAC_BACKLIGHT
 #include <asm/backlight.h>
 #endif
@@ -1282,43 +1280,54 @@ void vsx_unavailable_exception(struct pt
 	die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
 }
 
+#ifdef CONFIG_PPC64
 void facility_unavailable_exception(struct pt_regs *regs)
 {
 	static char *facility_strings[] = {
-		"FPU",
-		"VMX/VSX",
-		"DSCR",
-		"PMU SPRs",
-		"BHRB",
-		"TM",
-		"AT",
-		"EBB",
-		"TAR",
+		[FSCR_FP_LG] = "FPU",
+		[FSCR_VECVSX_LG] = "VMX/VSX",
+		[FSCR_DSCR_LG] = "DSCR",
+		[FSCR_PM_LG] = "PMU SPRs",
+		[FSCR_BHRB_LG] = "BHRB",
+		[FSCR_TM_LG] = "TM",
+		[FSCR_EBB_LG] = "EBB",
+		[FSCR_TAR_LG] = "TAR",
 	};
-	char *facility, *prefix;
+	char *facility = "unknown";
 	u64 value;
+	u8 status;
+	bool hv;
 
-	if (regs->trap == 0xf60) {
-		value = mfspr(SPRN_FSCR);
-		prefix = "";
-	} else {
+	hv = (regs->trap == 0xf80);
+	if (hv)
 		value = mfspr(SPRN_HFSCR);
-		prefix = "Hypervisor ";
+	else
+		value = mfspr(SPRN_FSCR);
+
+	status = value >> 56;
+	if (status == FSCR_DSCR_LG) {
+		/* User is acessing the DSCR.  Set the inherit bit and allow
+		 * the user to set it directly in future by setting via the
+		 * H/FSCR DSCR bit.
+		 */
+		current->thread.dscr_inherit = 1;
+		if (hv)
+			mtspr(SPRN_HFSCR, value | HFSCR_DSCR);
+		else
+			mtspr(SPRN_FSCR,  value | FSCR_DSCR);
+		return;
 	}
 
-	value = value >> 56;
+	if ((status < ARRAY_SIZE(facility_strings)) &&
+	    facility_strings[status])
+		facility = facility_strings[status];
 
 	/* We restore the interrupt state now */
 	if (!arch_irq_disabled_regs(regs))
 		local_irq_enable();
 
-	if (value < ARRAY_SIZE(facility_strings))
-		facility = facility_strings[value];
-	else
-		facility = "unknown";
-
 	pr_err("%sFacility '%s' unavailable, exception at 0x%lx, MSR=%lx\n",
-		prefix, facility, regs->nip, regs->msr);
+	       hv ? "Hypervisor " : "", facility, regs->nip, regs->msr);
 
 	if (user_mode(regs)) {
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
@@ -1327,6 +1336,7 @@ void facility_unavailable_exception(stru
 
 	die("Unexpected facility unavailable exception", regs, SIGABRT);
 }
+#endif
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 

[ 08/60] powerpc: Save the TAR register earlier

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Neuling <mikey@neuling.org>

commit c2d52644e2da8a07ecab5ca62dd0bc563089e8dc upstream.

This moves us to save the Target Address Register (TAR) a earlier in
__switch_to.  It introduces a new function save_tar() to do this.

We need to save the TAR earlier as we will overwrite it in the transactional
memory reclaim/recheckpoint path.  We are going to do this in a subsequent
patch which will fix saving the TAR register when it's modified inside a
transaction.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/switch_to.h |    9 +++++++++
 arch/powerpc/kernel/entry_64.S       |    9 ---------
 arch/powerpc/kernel/process.c        |   10 ++++++++++
 3 files changed, 19 insertions(+), 9 deletions(-)

--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -15,6 +15,15 @@ extern struct task_struct *__switch_to(s
 struct thread_struct;
 extern struct task_struct *_switch(struct thread_struct *prev,
 				   struct thread_struct *next);
+#ifdef CONFIG_PPC_BOOK3S_64
+static inline void save_tar(struct thread_struct *prev)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_207S))
+		prev->tar = mfspr(SPRN_TAR);
+}
+#else
+static inline void save_tar(struct thread_struct *prev) {}
+#endif
 
 extern void giveup_fpu(struct task_struct *);
 extern void load_up_fpu(void);
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -449,15 +449,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 
 #ifdef CONFIG_PPC_BOOK3S_64
 BEGIN_FTR_SECTION
-	/*
-	 * Back up the TAR across context switches.  Note that the TAR is not
-	 * available for use in the kernel.  (To provide this, the TAR should
-	 * be backed up/restored on exception entry/exit instead, and be in
-	 * pt_regs.  FIXME, this should be in pt_regs anyway (for debug).)
-	 */
-	mfspr	r0,SPRN_TAR
-	std	r0,THREAD_TAR(r3)
-
 	/* Event based branch registers */
 	mfspr	r0, SPRN_BESCR
 	std	r0, THREAD_BESCR(r3)
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -600,6 +600,16 @@ struct task_struct *__switch_to(struct t
 	struct ppc64_tlb_batch *batch;
 #endif
 
+	/* Back up the TAR across context switches.
+	 * Note that the TAR is not available for use in the kernel.  (To
+	 * provide this, the TAR should be backed up/restored on exception
+	 * entry/exit instead, and be in pt_regs.  FIXME, this should be in
+	 * pt_regs anyway (for debug).)
+	 * Save the TAR here before we do treclaim/trecheckpoint as these
+	 * will change the TAR.
+	 */
+	save_tar(&prev->thread);
+
 	__switch_to_tm(prev);
 
 #ifdef CONFIG_SMP

[ 09/60] powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Neuling <mikey@neuling.org>

commit 28e61cc466d8daace4b0f04ba2b83e0bd68f5832 upstream.

If a transaction is rolled back, the Target Address Register (TAR), Processor
Priority Register (PPR) and Data Stream Control Register (DSCR) should be
restored to the checkpointed values before the transaction began.  Any changes
to these SPRs inside the transaction should not be visible in the abort
handler.

Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR.  If
we preempt a processes inside a transaction which has modified any of these, on
process restore, that same transaction may be aborted we but we won't see the
checkpointed versions of these SPRs.

This adds checkpointed versions of these SPRs to the thread_struct and adds the
save/restore of these three SPRs to the treclaim/trechkpt code.

Without this if any of these SPRs are modified during a transaction, users may
incorrectly see a speculated SPR value even if the transaction is aborted.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/processor.h |    4 ++++
 arch/powerpc/kernel/asm-offsets.c    |    3 +++
 arch/powerpc/kernel/tm.S             |   20 ++++++++++++++++++++
 3 files changed, 27 insertions(+)

--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -247,6 +247,10 @@ struct thread_struct {
 	unsigned long	tm_orig_msr;	/* Thread's MSR on ctx switch */
 	struct pt_regs	ckpt_regs;	/* Checkpointed registers */
 
+	unsigned long	tm_tar;
+	unsigned long	tm_ppr;
+	unsigned long	tm_dscr;
+
 	/*
 	 * Transactional FP and VSX 0-31 register set.
 	 * NOTE: the sense of these is the opposite of the integer ckpt_regs!
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -139,6 +139,9 @@ int main(void)
 	DEFINE(THREAD_TM_TFHAR, offsetof(struct thread_struct, tm_tfhar));
 	DEFINE(THREAD_TM_TEXASR, offsetof(struct thread_struct, tm_texasr));
 	DEFINE(THREAD_TM_TFIAR, offsetof(struct thread_struct, tm_tfiar));
+	DEFINE(THREAD_TM_TAR, offsetof(struct thread_struct, tm_tar));
+	DEFINE(THREAD_TM_PPR, offsetof(struct thread_struct, tm_ppr));
+	DEFINE(THREAD_TM_DSCR, offsetof(struct thread_struct, tm_dscr));
 	DEFINE(PT_CKPT_REGS, offsetof(struct thread_struct, ckpt_regs));
 	DEFINE(THREAD_TRANSACT_VR0, offsetof(struct thread_struct,
 					 transact_vr[0]));
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -224,6 +224,16 @@ dont_backup_fp:
 	std	r5, _CCR(r7)
 	std	r6, _XER(r7)
 
+
+	/* ******************** TAR, PPR, DSCR ********** */
+	mfspr	r3, SPRN_TAR
+	mfspr	r4, SPRN_PPR
+	mfspr	r5, SPRN_DSCR
+
+	std	r3, THREAD_TM_TAR(r12)
+	std	r4, THREAD_TM_PPR(r12)
+	std	r5, THREAD_TM_DSCR(r12)
+
 	/* MSR and flags:  We don't change CRs, and we don't need to alter
 	 * MSR.
 	 */
@@ -338,6 +348,16 @@ dont_restore_fp:
 	mtmsr	r6				/* FP/Vec off again! */
 
 restore_gprs:
+
+	/* ******************** TAR, PPR, DSCR ********** */
+	ld	r4, THREAD_TM_TAR(r3)
+	ld	r5, THREAD_TM_PPR(r3)
+	ld	r6, THREAD_TM_DSCR(r3)
+
+	mtspr	SPRN_TAR,	r4
+	mtspr	SPRN_PPR,	r5
+	mtspr	SPRN_DSCR,	r6
+
 	/* ******************** CR,LR,CCR,MSR ********** */
 	ld	r3, _CTR(r7)
 	ld	r4, _LINK(r7)

[ 10/60] ext4: destroy ext4_es_cachep on module unload

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Sandeen <sandeen@redhat.com>

commit dd12ed144e9797094c04736f97aa27d5fe401476 upstream.

Without this, module can't be reloaded.

[  500.521980] kmem_cache_sanity_check (ext4_extent_status): Cache name already exists.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5400,6 +5400,7 @@ static void __exit ext4_exit_fs(void)
 	kset_unregister(ext4_kset);
 	ext4_exit_system_zone();
 	ext4_exit_pageio();
+	ext4_exit_es();
 }
 
 MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");

[ 11/60] ext4: make sure group number is bumped after a inode allocation race

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit a34eb503742fd25155fd6cff6163daacead9fbc3 upstream.

When we try to allocate an inode, and there is a race between two
CPU's trying to grab the same inode, _and_ this inode is the last free
inode in the block group, make sure the group number is bumped before
we continue searching the rest of the block groups.  Otherwise, we end
up searching the current block group twice, and we end up skipping
searching the last block group.  So in the unlikely situation where
almost all of the inodes are allocated, it's possible that we will
return ENOSPC even though there might be free inodes in that last
block group.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ialloc.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -734,11 +734,8 @@ repeat_in_this_group:
 		ino = ext4_find_next_zero_bit((unsigned long *)
 					      inode_bitmap_bh->b_data,
 					      EXT4_INODES_PER_GROUP(sb), ino);
-		if (ino >= EXT4_INODES_PER_GROUP(sb)) {
-			if (++group == ngroups)
-				group = 0;
-			continue;
-		}
+		if (ino >= EXT4_INODES_PER_GROUP(sb))
+			goto next_group;
 		if (group == 0 && (ino+1) < EXT4_FIRST_INO(sb)) {
 			ext4_error(sb, "reserved inode found cleared - "
 				   "inode=%lu", ino + 1);
@@ -768,6 +765,9 @@ repeat_in_this_group:
 			goto got; /* we grabbed the inode! */
 		if (ino < EXT4_INODES_PER_GROUP(sb))
 			goto repeat_in_this_group;
+next_group:
+		if (++group == ngroups)
+			group = 0;
 	}
 	err = -ENOSPC;
 	goto out;

[ 12/60] ext4: fix retry handling in ext4_ext_truncate()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 94eec0fc3520c759831763d866421b4d60b599b4 upstream.

We tested for ENOMEM instead of -ENOMEM.   Oops.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/extents.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4389,7 +4389,7 @@ void ext4_ext_truncate(handle_t *handle,
 retry:
 	err = ext4_es_remove_extent(inode, last_block,
 				    EXT_MAX_BLOCKS - last_block);
-	if (err == ENOMEM) {
+	if (err == -ENOMEM) {
 		cond_resched();
 		congestion_wait(BLK_RW_ASYNC, HZ/50);
 		goto retry;

[ 13/60] regmap: cache: Make sure to sync the last register in a block

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

commit 2d49b5987561e480bdbd8692b27fc5f49a1e2f0b upstream.

regcache_sync_block_raw_flush() expects the address of the register after last
register that needs to be synced as its parameter. But the last call to
regcache_sync_block_raw_flush() in regcache_sync_block_raw() passes the address
of the last register in the block. This effectively always skips over the last
register in a block, even if it needs to be synced. In order to fix it increase
the address by one register.

The issue was introduced in commit 75a5f89 ("regmap: cache: Write consecutive
registers in a single block write").

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/regmap/regcache.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -644,7 +644,8 @@ static int regcache_sync_block_raw(struc
 		}
 	}
 
-	return regcache_sync_block_raw_flush(map, &data, base, regtmp);
+	return regcache_sync_block_raw_flush(map, &data, base, regtmp +
+			map->reg_stride);
 }
 
 int regcache_sync_block(struct regmap *map, void *block,

[ 14/60] regmap: Add missing header for !CONFIG_REGMAP stubs

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mateusz Krawczuk <m.krawczuk@partner.samsung.com>

commit 49ccc142f9cbc33fdda18e8fa90c1c5b4a79c0ad upstream.

regmap.h requires linux/err.h if CONFIG_REGMAP is not defined. Without it I get
error.
CC      drivers/media/platform/exynos4-is/fimc-reg.o
In file included from drivers/media/platform/exynos4-is/fimc-reg.c:14:0:
include/linux/regmap.h: In function ‘regmap_write’:
include/linux/regmap.h:525:10: error: ‘EINVAL’ undeclared (first use in this function)
include/linux/regmap.h:525:10: note: each undeclared identifier is reported only once for each function it appears in

Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/regmap.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -15,6 +15,7 @@
 
 #include <linux/list.h>
 #include <linux/rbtree.h>
+#include <linux/err.h>
 
 struct module;
 struct device;

[ 15/60] hwmon: (adt7470) Fix incorrect return code check

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Curt Brune <curt@cumulusnetworks.com>

commit 93d783bcca69bfacc8dc739d8a050498402587b5 upstream.

In adt7470_write_word_data(), which writes two bytes using
i2c_smbus_write_byte_data(), the return codes are incorrectly AND-ed
together when they should be OR-ed together.

The return code of i2c_smbus_write_byte_data() is zero for success.

The upshot is only the first byte was ever written to the hardware.
The 2nd byte was never written out.

I noticed that trying to set the fan speed limits was not working
correctly on my system.  Setting the fan speed limits is the only
code that uses adt7470_write_word_data().  After making the change
the limit settings work and the alarms work also.

Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/adt7470.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -215,7 +215,7 @@ static inline int adt7470_write_word_dat
 					  u16 value)
 {
 	return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
-	       && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+	       || i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
 }
 
 static void adt7470_init_client(struct i2c_client *client)

[ 16/60] staging: zcache: fix "zcache=" kernel parameter

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Piotr Sarna <p.sarna@partner.samsung.com>

commit 02073798a6b081bf74e6c10d6f7e7a693c067ecd upstream.

Commit 835f2f5 ("staging: zcache: enable zcache to be built/loaded as
a module") introduced an incorrect handling of "zcache=" parameter.

Inside zcache_comp_init() function, zcache_comp_name variable is
checked for being empty. If not empty, the above variable is tested
for being compatible with Crypto API. Unfortunately, after that
function ends unconditionally (by the "goto out" directive) and returns:
- non-zero value if verification succeeded, wrongly indicating an error
- zero value if verification failed, falsely informing that function
  zcache_comp_init() ended properly.

A solution to this problem is as following:
1. Move the "goto out" directive inside the "if (!ret)" statement
2. In case that crypto_has_comp() returned 0, change the value of ret
   to non-zero before "goto out" to indicate an error.

This patch replaces an earlier one from Michal Hocko (based on report
from Cristian Rodriguez):

	http://permalink.gmane.org/gmane.linux.kernel.mm/102484

It also addressed the same issue but didn't fix the zcache_comp_init()
for case when the compressor data passed to "zcache=" option was invalid
or unsupported.

Signed-off-by: Piotr Sarna <p.sarna@partner.samsung.com>
[bzolnier: updated patch description]
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Cristian Rodriguez <crrodriguez@opensuse.org>
Cc: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/zcache/zcache-main.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1811,10 +1811,12 @@ static int zcache_comp_init(void)
 #else
 	if (*zcache_comp_name != '\0') {
 		ret = crypto_has_comp(zcache_comp_name, 0, 0);
-		if (!ret)
+		if (!ret) {
 			pr_info("zcache: %s not supported\n",
 					zcache_comp_name);
-		goto out;
+			ret = 1;
+			goto out;
+		}
 	}
 	if (!ret)
 		strcpy(zcache_comp_name, "lzo");

[ 17/60] media: em28xx: fix assignment of the eeprom data

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alban Browaeys <alban.browaeys@gmail.com>

commit f813b5775b471b656382ae8f087bb34dc894261f upstream.

Set the config structure pointer to the eeprom data pointer (data,
here eedata dereferenced) not the pointer to the pointer to
the eeprom data (eedata itself).

Signed-off-by: Alban Browaeys <prahal@yahoo.com>
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/em28xx/em28xx-i2c.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -726,7 +726,7 @@ static int em28xx_i2c_eeprom(struct em28
 
 	*eedata = data;
 	*eedata_len = len;
-	dev_config = (void *)eedata;
+	dev_config = (void *)*eedata;
 
 	switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) {
 	case 0:

[ 18/60] i2c: i2c-mxs: Use DMA mode even for small transfers

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.estevam@freescale.com>

commit d6e102f498cbcc8dd2e36721a01213f036397112 upstream.

Recently we have been seing some reports about PIO mode not working properly.

- http://www.spinics.net/lists/linux-i2c/msg11985.html
- http://marc.info/?l=linux-i2c&m=137235593101385&w=2
- https://lkml.org/lkml/2013/6/24/430

Let's use DMA mode even for small transfers.

Without this patch, i2c reads the incorrect sgtl5000 version on a mx28evk when
touchscreen is enabled:

[    5.856270] sgtl5000 0-000a: Device with ID register 0 is not a sgtl5000
[    9.877307] sgtl5000 0-000a: ASoC: failed to probe CODEC -19
[    9.883528] mxs-sgtl5000 sound.12: ASoC: failed to instantiate card -19
[    9.892955] mxs-sgtl5000 sound.12: snd_soc_register_card failed (-19)

[wsa: we have a proper solution for -next, so this non intrusive
solution is OK for now]

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-mxs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -494,7 +494,7 @@ static int mxs_i2c_xfer_msg(struct i2c_a
 	 * based on this empirical measurement and a lot of previous frobbing.
 	 */
 	i2c->cmd_err = 0;
-	if (msg->len < 8) {
+	if (0) {	/* disable PIO mode until a proper fix is made */
 		ret = mxs_i2c_pio_setup_xfer(adap, msg, flags);
 		if (ret)
 			mxs_i2c_reset(i2c);

[ 19/60] cpufreq: loongson2: fix regression related to clock management

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaro Koskinen <aaro.koskinen@iki.fi>

commit f54fe64d14dff3df6d45a48115d248a82557811f upstream.

Commit 42913c799 (MIPS: Loongson2: Use clk API instead of direct
dereferences) broke the cpufreq functionality on Loongson2 boards:
clk_set_rate() is called before the CPU frequency table is
initialized, and therefore will always fail.

Fix by moving the clk_set_rate() after the table initialization.
Tested on Lemote FuLoong mini-PC.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/loongson2_cpufreq.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -118,11 +118,6 @@ static int loongson2_cpufreq_cpu_init(st
 		clk_put(cpuclk);
 		return -EINVAL;
 	}
-	ret = clk_set_rate(cpuclk, rate);
-	if (ret) {
-		clk_put(cpuclk);
-		return ret;
-	}
 
 	/* clock table init */
 	for (i = 2;
@@ -130,6 +125,12 @@ static int loongson2_cpufreq_cpu_init(st
 	     i++)
 		loongson2_clockmod_table[i].frequency = (rate * i) / 8;
 
+	ret = clk_set_rate(cpuclk, rate);
+	if (ret) {
+		clk_put(cpuclk);
+		return ret;
+	}
+
 	policy->cur = loongson2_cpufreq_get(policy->cpu);
 
 	cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0],

[ 20/60] cpufreq: rename ignore_nice as ignore_nice_load

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 6c4640c3adfd97ce10efed7c07405f52d002b9a8 upstream.

This sysfs file was called ignore_nice_load earlier and commit
4d5dcc4 (cpufreq: governor: Implement per policy instances of
governors) changed its name to ignore_nice by mistake.

Lets get it renamed back to its original name.

Reported-by: Martin von Gagern <Martin.vGagern@gmx.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/cpufreq_conservative.c |   20 ++++++++++----------
 drivers/cpufreq/cpufreq_governor.c     |    8 ++++----
 drivers/cpufreq/cpufreq_governor.h     |    4 ++--
 drivers/cpufreq/cpufreq_ondemand.c     |   20 ++++++++++----------
 4 files changed, 26 insertions(+), 26 deletions(-)

--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -221,8 +221,8 @@ static ssize_t store_down_threshold(stru
 	return count;
 }
 
-static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
+		const char *buf, size_t count)
 {
 	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
 	unsigned int input, j;
@@ -235,10 +235,10 @@ static ssize_t store_ignore_nice(struct
 	if (input > 1)
 		input = 1;
 
-	if (input == cs_tuners->ignore_nice) /* nothing to do */
+	if (input == cs_tuners->ignore_nice_load) /* nothing to do */
 		return count;
 
-	cs_tuners->ignore_nice = input;
+	cs_tuners->ignore_nice_load = input;
 
 	/* we need to re-evaluate prev_cpu_idle */
 	for_each_online_cpu(j) {
@@ -246,7 +246,7 @@ static ssize_t store_ignore_nice(struct
 		dbs_info = &per_cpu(cs_cpu_dbs_info, j);
 		dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
 					&dbs_info->cdbs.prev_cpu_wall, 0);
-		if (cs_tuners->ignore_nice)
+		if (cs_tuners->ignore_nice_load)
 			dbs_info->cdbs.prev_cpu_nice =
 				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
 	}
@@ -279,7 +279,7 @@ show_store_one(cs, sampling_rate);
 show_store_one(cs, sampling_down_factor);
 show_store_one(cs, up_threshold);
 show_store_one(cs, down_threshold);
-show_store_one(cs, ignore_nice);
+show_store_one(cs, ignore_nice_load);
 show_store_one(cs, freq_step);
 declare_show_sampling_rate_min(cs);
 
@@ -287,7 +287,7 @@ gov_sys_pol_attr_rw(sampling_rate);
 gov_sys_pol_attr_rw(sampling_down_factor);
 gov_sys_pol_attr_rw(up_threshold);
 gov_sys_pol_attr_rw(down_threshold);
-gov_sys_pol_attr_rw(ignore_nice);
+gov_sys_pol_attr_rw(ignore_nice_load);
 gov_sys_pol_attr_rw(freq_step);
 gov_sys_pol_attr_ro(sampling_rate_min);
 
@@ -297,7 +297,7 @@ static struct attribute *dbs_attributes_
 	&sampling_down_factor_gov_sys.attr,
 	&up_threshold_gov_sys.attr,
 	&down_threshold_gov_sys.attr,
-	&ignore_nice_gov_sys.attr,
+	&ignore_nice_load_gov_sys.attr,
 	&freq_step_gov_sys.attr,
 	NULL
 };
@@ -313,7 +313,7 @@ static struct attribute *dbs_attributes_
 	&sampling_down_factor_gov_pol.attr,
 	&up_threshold_gov_pol.attr,
 	&down_threshold_gov_pol.attr,
-	&ignore_nice_gov_pol.attr,
+	&ignore_nice_load_gov_pol.attr,
 	&freq_step_gov_pol.attr,
 	NULL
 };
@@ -338,7 +338,7 @@ static int cs_init(struct dbs_data *dbs_
 	tuners->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
 	tuners->down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD;
 	tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
-	tuners->ignore_nice = 0;
+	tuners->ignore_nice_load = 0;
 	tuners->freq_step = DEF_FREQUENCY_STEP;
 
 	dbs_data->tuners = tuners;
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -91,9 +91,9 @@ void dbs_check_cpu(struct dbs_data *dbs_
 	unsigned int j;
 
 	if (dbs_data->cdata->governor == GOV_ONDEMAND)
-		ignore_nice = od_tuners->ignore_nice;
+		ignore_nice = od_tuners->ignore_nice_load;
 	else
-		ignore_nice = cs_tuners->ignore_nice;
+		ignore_nice = cs_tuners->ignore_nice_load;
 
 	policy = cdbs->cur_policy;
 
@@ -336,12 +336,12 @@ int cpufreq_governor_dbs(struct cpufreq_
 		cs_tuners = dbs_data->tuners;
 		cs_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu);
 		sampling_rate = cs_tuners->sampling_rate;
-		ignore_nice = cs_tuners->ignore_nice;
+		ignore_nice = cs_tuners->ignore_nice_load;
 	} else {
 		od_tuners = dbs_data->tuners;
 		od_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu);
 		sampling_rate = od_tuners->sampling_rate;
-		ignore_nice = od_tuners->ignore_nice;
+		ignore_nice = od_tuners->ignore_nice_load;
 		od_ops = dbs_data->cdata->gov_ops;
 		io_busy = od_tuners->io_is_busy;
 	}
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -165,7 +165,7 @@ struct cs_cpu_dbs_info_s {
 
 /* Per policy Governers sysfs tunables */
 struct od_dbs_tuners {
-	unsigned int ignore_nice;
+	unsigned int ignore_nice_load;
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
 	unsigned int up_threshold;
@@ -175,7 +175,7 @@ struct od_dbs_tuners {
 };
 
 struct cs_dbs_tuners {
-	unsigned int ignore_nice;
+	unsigned int ignore_nice_load;
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
 	unsigned int up_threshold;
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -403,8 +403,8 @@ static ssize_t store_sampling_down_facto
 	return count;
 }
 
-static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
-		size_t count)
+static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
+		const char *buf, size_t count)
 {
 	struct od_dbs_tuners *od_tuners = dbs_data->tuners;
 	unsigned int input;
@@ -419,10 +419,10 @@ static ssize_t store_ignore_nice(struct
 	if (input > 1)
 		input = 1;
 
-	if (input == od_tuners->ignore_nice) { /* nothing to do */
+	if (input == od_tuners->ignore_nice_load) { /* nothing to do */
 		return count;
 	}
-	od_tuners->ignore_nice = input;
+	od_tuners->ignore_nice_load = input;
 
 	/* we need to re-evaluate prev_cpu_idle */
 	for_each_online_cpu(j) {
@@ -430,7 +430,7 @@ static ssize_t store_ignore_nice(struct
 		dbs_info = &per_cpu(od_cpu_dbs_info, j);
 		dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
 			&dbs_info->cdbs.prev_cpu_wall, od_tuners->io_is_busy);
-		if (od_tuners->ignore_nice)
+		if (od_tuners->ignore_nice_load)
 			dbs_info->cdbs.prev_cpu_nice =
 				kcpustat_cpu(j).cpustat[CPUTIME_NICE];
 
@@ -461,7 +461,7 @@ show_store_one(od, sampling_rate);
 show_store_one(od, io_is_busy);
 show_store_one(od, up_threshold);
 show_store_one(od, sampling_down_factor);
-show_store_one(od, ignore_nice);
+show_store_one(od, ignore_nice_load);
 show_store_one(od, powersave_bias);
 declare_show_sampling_rate_min(od);
 
@@ -469,7 +469,7 @@ gov_sys_pol_attr_rw(sampling_rate);
 gov_sys_pol_attr_rw(io_is_busy);
 gov_sys_pol_attr_rw(up_threshold);
 gov_sys_pol_attr_rw(sampling_down_factor);
-gov_sys_pol_attr_rw(ignore_nice);
+gov_sys_pol_attr_rw(ignore_nice_load);
 gov_sys_pol_attr_rw(powersave_bias);
 gov_sys_pol_attr_ro(sampling_rate_min);
 
@@ -478,7 +478,7 @@ static struct attribute *dbs_attributes_
 	&sampling_rate_gov_sys.attr,
 	&up_threshold_gov_sys.attr,
 	&sampling_down_factor_gov_sys.attr,
-	&ignore_nice_gov_sys.attr,
+	&ignore_nice_load_gov_sys.attr,
 	&powersave_bias_gov_sys.attr,
 	&io_is_busy_gov_sys.attr,
 	NULL
@@ -494,7 +494,7 @@ static struct attribute *dbs_attributes_
 	&sampling_rate_gov_pol.attr,
 	&up_threshold_gov_pol.attr,
 	&sampling_down_factor_gov_pol.attr,
-	&ignore_nice_gov_pol.attr,
+	&ignore_nice_load_gov_pol.attr,
 	&powersave_bias_gov_pol.attr,
 	&io_is_busy_gov_pol.attr,
 	NULL
@@ -544,7 +544,7 @@ static int od_init(struct dbs_data *dbs_
 	}
 
 	tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
-	tuners->ignore_nice = 0;
+	tuners->ignore_nice_load = 0;
 	tuners->powersave_bias = default_powersave_bias;
 	tuners->io_is_busy = should_io_be_busy();
 

[ 21/60] ACPI / PM: Walk physical_node_list under physical_node_lock

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

commit 623cf33cb055b1e81fa47e4fc16789b2c129e31e upstream.

The list of physical devices corresponding to an ACPI device
object is walked by acpi_system_wakeup_device_seq_show() and
physical_device_enable_wakeup() without taking that object's
physical_node_lock mutex.  Since each of those functions may be
run at any time as a result of a user space action, the lack of
appropriate locking in them may lead to a kernel crash if that
happens during device hot-add or hot-remove involving the device
object in question.

Fix the issue by modifying acpi_system_wakeup_device_seq_show() and
physical_device_enable_wakeup() to use physical_node_lock as
appropriate.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/proc.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -311,6 +311,8 @@ acpi_system_wakeup_device_seq_show(struc
 			   dev->pnp.bus_id,
 			   (u32) dev->wakeup.sleep_state);
 
+		mutex_lock(&dev->physical_node_lock);
+
 		if (!dev->physical_node_count) {
 			seq_printf(seq, "%c%-8s\n",
 				dev->wakeup.flags.run_wake ? '*' : ' ',
@@ -338,6 +340,8 @@ acpi_system_wakeup_device_seq_show(struc
 				put_device(ldev);
 			}
 		}
+
+		mutex_unlock(&dev->physical_node_lock);
 	}
 	mutex_unlock(&acpi_device_lock);
 	return 0;
@@ -347,12 +351,16 @@ static void physical_device_enable_wakeu
 {
 	struct acpi_device_physical_node *entry;
 
+	mutex_lock(&adev->physical_node_lock);
+
 	list_for_each_entry(entry,
 		&adev->physical_node_list, node)
 		if (entry->dev && device_can_wakeup(entry->dev)) {
 			bool enable = !device_may_wakeup(entry->dev);
 			device_set_wakeup_enable(entry->dev, enable);
 		}
+
+	mutex_unlock(&adev->physical_node_lock);
 }
 
 static ssize_t

[ 22/60] tracing: Fix fields of struct trace_iterator that are zeroed by mistake

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Vagin <avagin@openvz.org>

commit ed5467da0e369e65b247b99eb6403cb79172bcda upstream.

tracing_read_pipe zeros all fields bellow "seq". The declaration contains
a comment about that, but it doesn't help.

The first field is "snapshot", it's true when current open file is
snapshot. Looks obvious, that it should not be zeroed.

The second field is "started". It was converted from cpumask_t to
cpumask_var_t (v2.6.28-4983-g4462344), in other words it was
converted from cpumask to pointer on cpumask.

Currently the reference on "started" memory is lost after the first read
from tracing_read_pipe and a proper object will never be freed.

The "started" is never dereferenced for trace_pipe, because trace_pipe
can't have the TRACE_FILE_ANNOTATE options.

Link: http://lkml.kernel.org/r/1375463803-3085183-1-git-send-email-avagin@openvz.org

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/ftrace_event.h |   10 ++++++----
 kernel/trace/trace.c         |    1 +
 2 files changed, 7 insertions(+), 4 deletions(-)

--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -78,6 +78,11 @@ struct trace_iterator {
 	/* trace_seq for __print_flags() and __print_symbolic() etc. */
 	struct trace_seq	tmp_seq;
 
+	cpumask_var_t		started;
+
+	/* it's true when current open file is snapshot */
+	bool			snapshot;
+
 	/* The below is zeroed out in pipe_read */
 	struct trace_seq	seq;
 	struct trace_entry	*ent;
@@ -90,10 +95,7 @@ struct trace_iterator {
 	loff_t			pos;
 	long			idx;
 
-	cpumask_var_t		started;
-
-	/* it's true when current open file is snapshot */
-	bool			snapshot;
+	/* All new field here will be zeroed out in pipe_read */
 };
 
 enum trace_iter_flags {
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -4121,6 +4121,7 @@ waitagain:
 	memset(&iter->seq, 0,
 	       sizeof(struct trace_iterator) -
 	       offsetof(struct trace_iterator, seq));
+	cpumask_clear(iter->started);
 	iter->pos = -1;
 
 	trace_event_read_lock();

[ 23/60] tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Z Lam <azl@google.com>

commit 711e124379e0f889e40e2f01d7f5d61936d3cd23 upstream.

Releasing the free_buffer file in an instance causes the global buffer
to be stopped when TRACE_ITER_STOP_ON_FREE is enabled. Operate on the
correct buffer.

Link: http://lkml.kernel.org/r/1375493777-17261-1-git-send-email-azl@google.com

Signed-off-by: Alexander Z Lam <azl@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -4438,7 +4438,7 @@ tracing_free_buffer_release(struct inode
 
 	/* disable tracing ? */
 	if (trace_flags & TRACE_ITER_STOP_ON_FREE)
-		tracing_off();
+		tracer_tracing_off(tr);
 	/* resize the ring buffer to 0 */
 	tracing_resize_ring_buffer(tr, 0, RING_BUFFER_ALL_CPUS);
 

[ 24/60] tracing: Use flag buffer_disabled for irqsoff tracer

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit 10246fa35d4ffdfe472185d4cbf9c2dfd9a9f023 upstream.

If the ring buffer is disabled and the irqsoff tracer records a trace it
will clear out its buffer and lose the data it had previously recorded.

Currently there's a callback when writing to the tracing_of file, but if
tracing is disabled via the function tracer trigger, it will not inform
the irqsoff tracer to stop recording.

By using the "mirror" flag (buffer_disabled) in the trace_array, that keeps
track of the status of the trace_array's buffer, it gives the irqsoff
tracer a fast way to know if it should record a new trace or not.
The flag may be a little behind the real state of the buffer, but it
should not affect the trace too much. It's more important for the irqsoff
tracer to be fast.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c         |  101 +++++++++++++++++++++++++++++--------------
 kernel/trace/trace_irqsoff.c |    4 -
 2 files changed, 72 insertions(+), 33 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -246,9 +246,24 @@ cycle_t ftrace_now(int cpu)
 	return ts;
 }
 
+/**
+ * tracing_is_enabled - Show if global_trace has been disabled
+ *
+ * Shows if the global trace has been enabled or not. It uses the
+ * mirror flag "buffer_disabled" to be used in fast paths such as for
+ * the irqsoff tracer. But it may be inaccurate due to races. If you
+ * need to know the accurate state, use tracing_is_on() which is a little
+ * slower, but accurate.
+ */
 int tracing_is_enabled(void)
 {
-	return tracing_is_on();
+	/*
+	 * For quick access (irqsoff uses this in fast path), just
+	 * return the mirror variable of the state of the ring buffer.
+	 * It's a little racy, but we don't really care.
+	 */
+	smp_rmb();
+	return !global_trace.buffer_disabled;
 }
 
 /*
@@ -361,6 +376,23 @@ unsigned long trace_flags = TRACE_ITER_P
 	TRACE_ITER_GRAPH_TIME | TRACE_ITER_RECORD_CMD | TRACE_ITER_OVERWRITE |
 	TRACE_ITER_IRQ_INFO | TRACE_ITER_MARKERS | TRACE_ITER_FUNCTION;
 
+void tracer_tracing_on(struct trace_array *tr)
+{
+	if (tr->trace_buffer.buffer)
+		ring_buffer_record_on(tr->trace_buffer.buffer);
+	/*
+	 * This flag is looked at when buffers haven't been allocated
+	 * yet, or by some tracers (like irqsoff), that just want to
+	 * know if the ring buffer has been disabled, but it can handle
+	 * races of where it gets disabled but we still do a record.
+	 * As the check is in the fast path of the tracers, it is more
+	 * important to be fast than accurate.
+	 */
+	tr->buffer_disabled = 0;
+	/* Make the flag seen by readers */
+	smp_wmb();
+}
+
 /**
  * tracing_on - enable tracing buffers
  *
@@ -369,15 +401,7 @@ unsigned long trace_flags = TRACE_ITER_P
  */
 void tracing_on(void)
 {
-	if (global_trace.trace_buffer.buffer)
-		ring_buffer_record_on(global_trace.trace_buffer.buffer);
-	/*
-	 * This flag is only looked at when buffers haven't been
-	 * allocated yet. We don't really care about the race
-	 * between setting this flag and actually turning
-	 * on the buffer.
-	 */
-	global_trace.buffer_disabled = 0;
+	tracer_tracing_on(&global_trace);
 }
 EXPORT_SYMBOL_GPL(tracing_on);
 
@@ -571,6 +595,23 @@ void tracing_snapshot_alloc(void)
 EXPORT_SYMBOL_GPL(tracing_snapshot_alloc);
 #endif /* CONFIG_TRACER_SNAPSHOT */
 
+void tracer_tracing_off(struct trace_array *tr)
+{
+	if (tr->trace_buffer.buffer)
+		ring_buffer_record_off(tr->trace_buffer.buffer);
+	/*
+	 * This flag is looked at when buffers haven't been allocated
+	 * yet, or by some tracers (like irqsoff), that just want to
+	 * know if the ring buffer has been disabled, but it can handle
+	 * races of where it gets disabled but we still do a record.
+	 * As the check is in the fast path of the tracers, it is more
+	 * important to be fast than accurate.
+	 */
+	tr->buffer_disabled = 1;
+	/* Make the flag seen by readers */
+	smp_wmb();
+}
+
 /**
  * tracing_off - turn off tracing buffers
  *
@@ -581,26 +622,29 @@ EXPORT_SYMBOL_GPL(tracing_snapshot_alloc
  */
 void tracing_off(void)
 {
-	if (global_trace.trace_buffer.buffer)
-		ring_buffer_record_off(global_trace.trace_buffer.buffer);
-	/*
-	 * This flag is only looked at when buffers haven't been
-	 * allocated yet. We don't really care about the race
-	 * between setting this flag and actually turning
-	 * on the buffer.
-	 */
-	global_trace.buffer_disabled = 1;
+	tracer_tracing_off(&global_trace);
 }
 EXPORT_SYMBOL_GPL(tracing_off);
 
 /**
+ * tracer_tracing_is_on - show real state of ring buffer enabled
+ * @tr : the trace array to know if ring buffer is enabled
+ *
+ * Shows real state of the ring buffer if it is enabled or not.
+ */
+int tracer_tracing_is_on(struct trace_array *tr)
+{
+	if (tr->trace_buffer.buffer)
+		return ring_buffer_record_is_on(tr->trace_buffer.buffer);
+	return !tr->buffer_disabled;
+}
+
+/**
  * tracing_is_on - show state of ring buffers enabled
  */
 int tracing_is_on(void)
 {
-	if (global_trace.trace_buffer.buffer)
-		return ring_buffer_record_is_on(global_trace.trace_buffer.buffer);
-	return !global_trace.buffer_disabled;
+	return tracer_tracing_is_on(&global_trace);
 }
 EXPORT_SYMBOL_GPL(tracing_is_on);
 
@@ -4060,7 +4104,7 @@ static int tracing_wait_pipe(struct file
 		 *
 		 * iter->pos will be 0 if we haven't read anything.
 		 */
-		if (!tracing_is_enabled() && iter->pos)
+		if (!tracing_is_on() && iter->pos)
 			break;
 	}
 
@@ -5772,15 +5816,10 @@ rb_simple_read(struct file *filp, char _
 	       size_t cnt, loff_t *ppos)
 {
 	struct trace_array *tr = filp->private_data;
-	struct ring_buffer *buffer = tr->trace_buffer.buffer;
 	char buf[64];
 	int r;
 
-	if (buffer)
-		r = ring_buffer_record_is_on(buffer);
-	else
-		r = 0;
-
+	r = tracer_tracing_is_on(tr);
 	r = sprintf(buf, "%d\n", r);
 
 	return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
@@ -5802,11 +5841,11 @@ rb_simple_write(struct file *filp, const
 	if (buffer) {
 		mutex_lock(&trace_types_lock);
 		if (val) {
-			ring_buffer_record_on(buffer);
+			tracer_tracing_on(tr);
 			if (tr->current_trace->start)
 				tr->current_trace->start(tr);
 		} else {
-			ring_buffer_record_off(buffer);
+			tracer_tracing_off(tr);
 			if (tr->current_trace->stop)
 				tr->current_trace->stop(tr);
 		}
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -373,7 +373,7 @@ start_critical_timing(unsigned long ip,
 	struct trace_array_cpu *data;
 	unsigned long flags;
 
-	if (likely(!tracer_enabled))
+	if (!tracer_enabled || !tracing_is_enabled())
 		return;
 
 	cpu = raw_smp_processor_id();
@@ -416,7 +416,7 @@ stop_critical_timing(unsigned long ip, u
 	else
 		return;
 
-	if (!tracer_enabled)
+	if (!tracer_enabled || !tracing_is_enabled())
 		return;
 
 	data = per_cpu_ptr(tr->trace_buffer.data, cpu);

[ 25/60] tracing: Fix reset of time stamps during trace_clock changes

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Z Lam <azl@google.com>

commit 9457158bbc0ee04ecef76862d73eecd8076e9c7b upstream.

Fixed two issues with changing the timestamp clock with trace_clock:

 - The global buffer was reset on instance clock changes. Change this to pass
   the correct per-instance buffer
 - ftrace_now() is used to set buf->time_start in tracing_reset_online_cpus().
   This was incorrect because ftrace_now() used the global buffer's clock to
   return the current time. Change this to use buffer_ftrace_now() which
   returns the current time for the correct per-instance buffer.

Also removed tracing_reset_current() because it is not used anywhere

Link: http://lkml.kernel.org/r/1375493777-17261-2-git-send-email-azl@google.com

Signed-off-by: Alexander Z Lam <azl@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -232,20 +232,25 @@ int filter_current_check_discard(struct
 }
 EXPORT_SYMBOL_GPL(filter_current_check_discard);
 
-cycle_t ftrace_now(int cpu)
+cycle_t buffer_ftrace_now(struct trace_buffer *buf, int cpu)
 {
 	u64 ts;
 
 	/* Early boot up does not have a buffer yet */
-	if (!global_trace.trace_buffer.buffer)
+	if (!buf->buffer)
 		return trace_clock_local();
 
-	ts = ring_buffer_time_stamp(global_trace.trace_buffer.buffer, cpu);
-	ring_buffer_normalize_time_stamp(global_trace.trace_buffer.buffer, cpu, &ts);
+	ts = ring_buffer_time_stamp(buf->buffer, cpu);
+	ring_buffer_normalize_time_stamp(buf->buffer, cpu, &ts);
 
 	return ts;
 }
 
+cycle_t ftrace_now(int cpu)
+{
+	return buffer_ftrace_now(&global_trace.trace_buffer, cpu);
+}
+
 /**
  * tracing_is_enabled - Show if global_trace has been disabled
  *
@@ -1194,7 +1199,7 @@ void tracing_reset_online_cpus(struct tr
 	/* Make sure all commits have finished */
 	synchronize_sched();
 
-	buf->time_start = ftrace_now(buf->cpu);
+	buf->time_start = buffer_ftrace_now(buf, buf->cpu);
 
 	for_each_online_cpu(cpu)
 		ring_buffer_reset_cpu(buffer, cpu);
@@ -1202,11 +1207,6 @@ void tracing_reset_online_cpus(struct tr
 	ring_buffer_record_enable(buffer);
 }
 
-void tracing_reset_current(int cpu)
-{
-	tracing_reset(&global_trace.trace_buffer, cpu);
-}
-
 /* Must have trace_types_lock held */
 void tracing_reset_all_online_cpus(void)
 {
@@ -4647,12 +4647,12 @@ static ssize_t tracing_clock_write(struc
 	 * New clock may not be consistent with the previous clock.
 	 * Reset the buffer so that it doesn't have incomparable timestamps.
 	 */
-	tracing_reset_online_cpus(&global_trace.trace_buffer);
+	tracing_reset_online_cpus(&tr->trace_buffer);
 
 #ifdef CONFIG_TRACER_MAX_TRACE
 	if (tr->flags & TRACE_ARRAY_FL_GLOBAL && tr->max_buffer.buffer)
 		ring_buffer_set_clock(tr->max_buffer.buffer, trace_clocks[i].func);
-	tracing_reset_online_cpus(&global_trace.max_buffer);
+	tracing_reset_online_cpus(&tr->max_buffer);
 #endif
 
 	mutex_unlock(&trace_types_lock);

[ 26/60] ALSA: usb-audio: do not trust too-big wMaxPacketSize values

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit 57e6dae1087bbaa6b33d3dd8a8e90b63888939a3 upstream.

The driver used to assume that the streaming endpoint's wMaxPacketSize
value would be an indication of how much data the endpoint expects or
sends, and compute the number of packets per URB using this value.

However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes,
while only about 88 or 44 bytes are be actually used.  This discrepancy
would result in URBs with far too few packets, which would not work
correctly on the EHCI driver.

To get correct URBs, use wMaxPacketSize only as an upper limit on the
packet size.

Reported-by: James Stone <jamesmstone@gmail.com>
Tested-by: James Stone <jamesmstone@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/endpoint.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -591,17 +591,16 @@ static int data_ep_set_params(struct snd
 	ep->stride = frame_bits >> 3;
 	ep->silence_value = pcm_format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
 
-	/* calculate max. frequency */
-	if (ep->maxpacksize) {
+	/* assume max. frequency is 25% higher than nominal */
+	ep->freqmax = ep->freqn + (ep->freqn >> 2);
+	maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
+				>> (16 - ep->datainterval);
+	/* but wMaxPacketSize might reduce this */
+	if (ep->maxpacksize && ep->maxpacksize < maxsize) {
 		/* whatever fits into a max. size packet */
 		maxsize = ep->maxpacksize;
 		ep->freqmax = (maxsize / (frame_bits >> 3))
 				<< (16 - ep->datainterval);
-	} else {
-		/* no max. packet size: just take 25% higher than nominal */
-		ep->freqmax = ep->freqn + (ep->freqn >> 2);
-		maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
-				>> (16 - ep->datainterval);
 	}
 
 	if (ep->fill_max)

[ 27/60] ALSA: 6fire: fix DMA issues with URB transfer_buffer usage

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jussi Kivilinna <jussi.kivilinna@iki.fi>

commit ddb6b5a964371e8e52e696b2b258bda144c8bd3f upstream.

Patch fixes 6fire not to use stack as URB transfer_buffer. URB buffers need to
be DMA-able, which stack is not. Furthermore, transfer_buffer should not be
allocated as part of larger device structure because DMA coherency issues and
patch fixes this issue too.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Tested-by: Torsten Schenk <torsten.schenk@zoho.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/6fire/comm.c |   38 +++++++++++++++++++++++++++++++++-----
 sound/usb/6fire/comm.h |    2 +-
 2 files changed, 34 insertions(+), 6 deletions(-)

--- a/sound/usb/6fire/comm.c
+++ b/sound/usb/6fire/comm.c
@@ -110,19 +110,37 @@ static int usb6fire_comm_send_buffer(u8
 static int usb6fire_comm_write8(struct comm_runtime *rt, u8 request,
 		u8 reg, u8 value)
 {
-	u8 buffer[13]; /* 13: maximum length of message */
+	u8 *buffer;
+	int ret;
+
+	/* 13: maximum length of message */
+	buffer = kmalloc(13, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
 
 	usb6fire_comm_init_buffer(buffer, 0x00, request, reg, value, 0x00);
-	return usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+	ret = usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+
+	kfree(buffer);
+	return ret;
 }
 
 static int usb6fire_comm_write16(struct comm_runtime *rt, u8 request,
 		u8 reg, u8 vl, u8 vh)
 {
-	u8 buffer[13]; /* 13: maximum length of message */
+	u8 *buffer;
+	int ret;
+
+	/* 13: maximum length of message */
+	buffer = kmalloc(13, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
 
 	usb6fire_comm_init_buffer(buffer, 0x00, request, reg, vl, vh);
-	return usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+	ret = usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+
+	kfree(buffer);
+	return ret;
 }
 
 int usb6fire_comm_init(struct sfire_chip *chip)
@@ -135,6 +153,12 @@ int usb6fire_comm_init(struct sfire_chip
 	if (!rt)
 		return -ENOMEM;
 
+	rt->receiver_buffer = kzalloc(COMM_RECEIVER_BUFSIZE, GFP_KERNEL);
+	if (!rt->receiver_buffer) {
+		kfree(rt);
+		return -ENOMEM;
+	}
+
 	urb = &rt->receiver;
 	rt->serial = 1;
 	rt->chip = chip;
@@ -153,6 +177,7 @@ int usb6fire_comm_init(struct sfire_chip
 	urb->interval = 1;
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret < 0) {
+		kfree(rt->receiver_buffer);
 		kfree(rt);
 		snd_printk(KERN_ERR PREFIX "cannot create comm data receiver.");
 		return ret;
@@ -171,6 +196,9 @@ void usb6fire_comm_abort(struct sfire_ch
 
 void usb6fire_comm_destroy(struct sfire_chip *chip)
 {
-	kfree(chip->comm);
+	struct comm_runtime *rt = chip->comm;
+
+	kfree(rt->receiver_buffer);
+	kfree(rt);
 	chip->comm = NULL;
 }
--- a/sound/usb/6fire/comm.h
+++ b/sound/usb/6fire/comm.h
@@ -24,7 +24,7 @@ struct comm_runtime {
 	struct sfire_chip *chip;
 
 	struct urb receiver;
-	u8 receiver_buffer[COMM_RECEIVER_BUFSIZE];
+	u8 *receiver_buffer;
 
 	u8 serial; /* urb serial */
 

[ 28/60] Btrfs: release both paths before logging dir/changed extents

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <jbacik@fusionio.com>

commit f3b15ccdbb9a79781578249a63318805e55a6c34 upstream.

The ceph guys tripped over this bug where we were still holding onto the
original path that we used to copy the inode with when logging.  This is based
on Chris's fix which was reported to fix the problem.  We need to drop the paths
in two cases anyway so just move the drop up so that we don't have duplicate
code.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3728,8 +3728,9 @@ next_slot:
 	}
 
 log_extents:
+	btrfs_release_path(path);
+	btrfs_release_path(dst_path);
 	if (fast_search) {
-		btrfs_release_path(dst_path);
 		ret = btrfs_log_changed_extents(trans, root, inode, dst_path);
 		if (ret) {
 			err = ret;
@@ -3746,8 +3747,6 @@ log_extents:
 	}
 
 	if (inode_only == LOG_INODE_ALL && S_ISDIR(inode->i_mode)) {
-		btrfs_release_path(path);
-		btrfs_release_path(dst_path);
 		ret = log_directory_changes(trans, root, inode, path, dst_path);
 		if (ret) {
 			err = ret;

[ 29/60] LOCKD: Dont call utsname()->nodename from nlmclnt_setlockargs

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 9a1b6bf818e74bb7aabaecb59492b739f2f4d742 upstream.

Firstly, nlmclnt_setlockargs can be called from a reclaimer thread, in
which case we're in entirely the wrong namespace.

Secondly, commit 8aac62706adaaf0fab02c4327761561c8bda9448 (move
exit_task_namespaces() outside of exit_notify()) now means that
exit_task_work() is called after exit_task_namespaces(), which
triggers an Oops when we're freeing up the locks.

Fix this by ensuring that we initialise the nlm_host's rpc_client at mount
time, so that the cl_nodename field is initialised to the value of
utsname()->nodename that the net namespace uses. Then replace the
lockd callers of utsname()->nodename.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/clntlock.c |   13 +++++++++----
 fs/lockd/clntproc.c |    5 +++--
 2 files changed, 12 insertions(+), 6 deletions(-)

--- a/fs/lockd/clntlock.c
+++ b/fs/lockd/clntlock.c
@@ -64,12 +64,17 @@ struct nlm_host *nlmclnt_init(const stru
 				   nlm_init->protocol, nlm_version,
 				   nlm_init->hostname, nlm_init->noresvport,
 				   nlm_init->net);
-	if (host == NULL) {
-		lockd_down(nlm_init->net);
-		return ERR_PTR(-ENOLCK);
-	}
+	if (host == NULL)
+		goto out_nohost;
+	if (host->h_rpcclnt == NULL && nlm_bind_host(host) == NULL)
+		goto out_nobind;
 
 	return host;
+out_nobind:
+	nlmclnt_release_host(host);
+out_nohost:
+	lockd_down(nlm_init->net);
+	return ERR_PTR(-ENOLCK);
 }
 EXPORT_SYMBOL_GPL(nlmclnt_init);
 
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -125,14 +125,15 @@ static void nlmclnt_setlockargs(struct n
 {
 	struct nlm_args	*argp = &req->a_args;
 	struct nlm_lock	*lock = &argp->lock;
+	char *nodename = req->a_host->h_rpcclnt->cl_nodename;
 
 	nlmclnt_next_cookie(&argp->cookie);
 	memcpy(&lock->fh, NFS_FH(file_inode(fl->fl_file)), sizeof(struct nfs_fh));
-	lock->caller  = utsname()->nodename;
+	lock->caller  = nodename;
 	lock->oh.data = req->a_owner;
 	lock->oh.len  = snprintf(req->a_owner, sizeof(req->a_owner), "%u@%s",
 				(unsigned int)fl->fl_u.nfs_fl.owner->pid,
-				utsname()->nodename);
+				nodename);
 	lock->svid = fl->fl_u.nfs_fl.owner->pid;
 	lock->fl.fl_start = fl->fl_start;
 	lock->fl.fl_end = fl->fl_end;

[ 30/60] SUNRPC: Dont auto-disconnect from the local rpcbind socket

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 00326ed6442c66021cd4b5e19e80f3e2027d5d42 upstream.

There is no need for the kernel to time out the AF_LOCAL connection to
the rpcbind socket, and doing so is problematic because when it is
time to reconnect, our process may no longer be using the same mount
namespace.

Reported-by: Nix <nix@esperi.org.uk>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/rpcb_clnt.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -238,6 +238,14 @@ static int rpcb_create_local_unix(struct
 		.program	= &rpcb_program,
 		.version	= RPCBVERS_2,
 		.authflavor	= RPC_AUTH_NULL,
+		/*
+		 * We turn off the idle timeout to prevent the kernel
+		 * from automatically disconnecting the socket.
+		 * Otherwise, we'd have to cache the mount namespace
+		 * of the caller and somehow pass that to the socket
+		 * reconnect code.
+		 */
+		.flags		= RPC_CLNT_CREATE_NO_IDLE_TIMEOUT,
 	};
 	struct rpc_clnt *clnt, *clnt4;
 	int result = 0;

[ 31/60] SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 786615bc1ce84150ded80daea6bd9f6297f48e73 upstream.

If rpcbind causes our connection to the AF_LOCAL socket to close after
we've registered a service, then we want to be careful about reconnecting
since the mount namespace may have changed.

By simply refusing to reconnect the AF_LOCAL socket in the case of
unregister, we avoid the need to somehow save the mount namespace. While
this may lead to some services not unregistering properly, it should
be safe.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/sunrpc/sched.h |    1 +
 net/sunrpc/clnt.c            |    4 ++++
 net/sunrpc/netns.h           |    1 +
 net/sunrpc/rpcb_clnt.c       |   40 +++++++++++++++++++++++++++-------------
 4 files changed, 33 insertions(+), 13 deletions(-)

--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -130,6 +130,7 @@ struct rpc_task_setup {
 #define RPC_TASK_SOFTCONN	0x0400		/* Fail if can't connect */
 #define RPC_TASK_SENT		0x0800		/* message was sent */
 #define RPC_TASK_TIMEOUT	0x1000		/* fail with ETIMEDOUT on timeout */
+#define RPC_TASK_NOCONNECT	0x2000		/* return ENOTCONN if not connected */
 
 #define RPC_IS_ASYNC(t)		((t)->tk_flags & RPC_TASK_ASYNC)
 #define RPC_IS_SWAPPER(t)	((t)->tk_flags & RPC_TASK_SWAPPER)
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1644,6 +1644,10 @@ call_connect(struct rpc_task *task)
 		task->tk_action = call_connect_status;
 		if (task->tk_status < 0)
 			return;
+		if (task->tk_flags & RPC_TASK_NOCONNECT) {
+			rpc_exit(task, -ENOTCONN);
+			return;
+		}
 		xprt_connect(task);
 	}
 }
--- a/net/sunrpc/netns.h
+++ b/net/sunrpc/netns.h
@@ -23,6 +23,7 @@ struct sunrpc_net {
 	struct rpc_clnt *rpcb_local_clnt4;
 	spinlock_t rpcb_clnt_lock;
 	unsigned int rpcb_users;
+	unsigned int rpcb_is_af_local : 1;
 
 	struct mutex gssp_lock;
 	wait_queue_head_t gssp_wq;
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -204,13 +204,15 @@ void rpcb_put_local(struct net *net)
 }
 
 static void rpcb_set_local(struct net *net, struct rpc_clnt *clnt,
-			struct rpc_clnt *clnt4)
+			struct rpc_clnt *clnt4,
+			bool is_af_local)
 {
 	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
 
 	/* Protected by rpcb_create_local_mutex */
 	sn->rpcb_local_clnt = clnt;
 	sn->rpcb_local_clnt4 = clnt4;
+	sn->rpcb_is_af_local = is_af_local ? 1 : 0;
 	smp_wmb(); 
 	sn->rpcb_users = 1;
 	dprintk("RPC:       created new rpcb local clients (rpcb_local_clnt: "
@@ -271,7 +273,7 @@ static int rpcb_create_local_unix(struct
 		clnt4 = NULL;
 	}
 
-	rpcb_set_local(net, clnt, clnt4);
+	rpcb_set_local(net, clnt, clnt4, true);
 
 out:
 	return result;
@@ -323,7 +325,7 @@ static int rpcb_create_local_net(struct
 		clnt4 = NULL;
 	}
 
-	rpcb_set_local(net, clnt, clnt4);
+	rpcb_set_local(net, clnt, clnt4, false);
 
 out:
 	return result;
@@ -384,13 +386,16 @@ static struct rpc_clnt *rpcb_create(stru
 	return rpc_create(&args);
 }
 
-static int rpcb_register_call(struct rpc_clnt *clnt, struct rpc_message *msg)
+static int rpcb_register_call(struct sunrpc_net *sn, struct rpc_clnt *clnt, struct rpc_message *msg, bool is_set)
 {
-	int result, error = 0;
+	int flags = RPC_TASK_NOCONNECT;
+	int error, result = 0;
 
+	if (is_set || !sn->rpcb_is_af_local)
+		flags = RPC_TASK_SOFTCONN;
 	msg->rpc_resp = &result;
 
-	error = rpc_call_sync(clnt, msg, RPC_TASK_SOFTCONN);
+	error = rpc_call_sync(clnt, msg, flags);
 	if (error < 0) {
 		dprintk("RPC:       failed to contact local rpcbind "
 				"server (errno %d).\n", -error);
@@ -447,16 +452,19 @@ int rpcb_register(struct net *net, u32 p
 		.rpc_argp	= &map,
 	};
 	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
+	bool is_set = false;
 
 	dprintk("RPC:       %sregistering (%u, %u, %d, %u) with local "
 			"rpcbind\n", (port ? "" : "un"),
 			prog, vers, prot, port);
 
 	msg.rpc_proc = &rpcb_procedures2[RPCBPROC_UNSET];
-	if (port)
+	if (port != 0) {
 		msg.rpc_proc = &rpcb_procedures2[RPCBPROC_SET];
+		is_set = true;
+	}
 
-	return rpcb_register_call(sn->rpcb_local_clnt, &msg);
+	return rpcb_register_call(sn, sn->rpcb_local_clnt, &msg, is_set);
 }
 
 /*
@@ -469,6 +477,7 @@ static int rpcb_register_inet4(struct su
 	const struct sockaddr_in *sin = (const struct sockaddr_in *)sap;
 	struct rpcbind_args *map = msg->rpc_argp;
 	unsigned short port = ntohs(sin->sin_port);
+	bool is_set = false;
 	int result;
 
 	map->r_addr = rpc_sockaddr2uaddr(sap, GFP_KERNEL);
@@ -479,10 +488,12 @@ static int rpcb_register_inet4(struct su
 			map->r_addr, map->r_netid);
 
 	msg->rpc_proc = &rpcb_procedures4[RPCBPROC_UNSET];
-	if (port)
+	if (port != 0) {
 		msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET];
+		is_set = true;
+	}
 
-	result = rpcb_register_call(sn->rpcb_local_clnt4, msg);
+	result = rpcb_register_call(sn, sn->rpcb_local_clnt4, msg, is_set);
 	kfree(map->r_addr);
 	return result;
 }
@@ -497,6 +508,7 @@ static int rpcb_register_inet6(struct su
 	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)sap;
 	struct rpcbind_args *map = msg->rpc_argp;
 	unsigned short port = ntohs(sin6->sin6_port);
+	bool is_set = false;
 	int result;
 
 	map->r_addr = rpc_sockaddr2uaddr(sap, GFP_KERNEL);
@@ -507,10 +519,12 @@ static int rpcb_register_inet6(struct su
 			map->r_addr, map->r_netid);
 
 	msg->rpc_proc = &rpcb_procedures4[RPCBPROC_UNSET];
-	if (port)
+	if (port != 0) {
 		msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET];
+		is_set = true;
+	}
 
-	result = rpcb_register_call(sn->rpcb_local_clnt4, msg);
+	result = rpcb_register_call(sn, sn->rpcb_local_clnt4, msg, is_set);
 	kfree(map->r_addr);
 	return result;
 }
@@ -527,7 +541,7 @@ static int rpcb_unregister_all_protofami
 	map->r_addr = "";
 	msg->rpc_proc = &rpcb_procedures4[RPCBPROC_UNSET];
 
-	return rpcb_register_call(sn->rpcb_local_clnt4, msg);
+	return rpcb_register_call(sn, sn->rpcb_local_clnt4, msg, false);
 }
 
 /**

[ 32/60] virtio/console: Quit from splice_write if pipe->nrbufs is 0

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>

commit 68c034fefe20eaf7d5569aae84584b07987ce50a upstream.

Quit from splice_write if pipe->nrbufs is 0 for avoiding oops in virtio-serial.

When an application was doing splice from a kernel buffer to virtio-serial on
a guest, the application received signal(SIGINT). This situation will normally
happen, but the kernel executed a kernel panic by oops as follows:

 BUG: unable to handle kernel paging request at ffff882071c8ef28
 IP: [<ffffffff812de48f>] sg_init_table+0x2f/0x50
 PGD 1fac067 PUD 0
 Oops: 0000 [#1] SMP
 Modules linked in: lockd sunrpc bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd microcode virtio_balloon virtio_net pcspkr soundcore i2c_piix4 i2c_core uinput floppy
 CPU: 1 PID: 908 Comm: trace-cmd Not tainted 3.10.0+ #49
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
 task: ffff880071c64650 ti: ffff88007bf24000 task.ti: ffff88007bf24000
 RIP: 0010:[<ffffffff812de48f>]  [<ffffffff812de48f>] sg_init_table+0x2f/0x50
 RSP: 0018:ffff88007bf25dd8  EFLAGS: 00010286
 RAX: 0000001fffffffe0 RBX: ffff882071c8ef28 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880071c8ef48
 RBP: ffff88007bf25de8 R08: ffff88007fd15d40 R09: ffff880071c8ef48
 R10: ffffea0001c71040 R11: ffffffff8139c555 R12: 0000000000000000
 R13: ffff88007506a3c0 R14: ffff88007c862500 R15: ffff880071c8ef00
 FS:  00007f0a3646c740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffff882071c8ef28 CR3: 000000007acbb000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffff880071c8ef48 ffff88007bf25e20 ffff88007bf25e88 ffffffff8139d6fa
  ffff88007bf25e28 ffffffff8127a3f4 0000000000000000 0000000000000000
  ffff880071c8ef48 0000100000000000 0000000000000003 ffff88007bf25e08
 Call Trace:
  [<ffffffff8139d6fa>] port_fops_splice_write+0xaa/0x130
  [<ffffffff8127a3f4>] ? selinux_file_permission+0xc4/0x120
  [<ffffffff8139d650>] ? wait_port_writable+0x1b0/0x1b0
  [<ffffffff811a6fe0>] do_splice_from+0xa0/0x110
  [<ffffffff811a951f>] SyS_splice+0x5ff/0x6b0
  [<ffffffff8161f8c2>] system_call_fastpath+0x16/0x1b
 Code: c1 e2 05 48 89 e5 48 83 ec 10 4c 89 65 f8 41 89 f4 31 f6 48 89 5d f0 48 89 fb e8 8d ce ff ff 41 8d 44 24 ff 48 c1 e0 05 48 01 c3 <48> 8b 03 48 83 e0 fe 48 83 c8 02 48 89 03 48 8b 5d f0 4c 8b 65
 RIP  [<ffffffff812de48f>] sg_init_table+0x2f/0x50
  RSP <ffff88007bf25dd8>
 CR2: ffff882071c8ef28
 ---[ end trace 86323505eb42ea8f ]---

It seems to induce pagefault in sg_init_tabel() when pipe->nrbufs is equal to
zero. This may happen in a following situation:

(1) The application normally does splice(read) from a kernel buffer, then does
    splice(write) to virtio-serial.
(2) The application receives SIGINT when is doing splice(read), so splice(read)
    is failed by EINTR. However, the application does not finish the operation.
(3) The application tries to do splice(write) without pipe->nrbufs.
(4) The virtio-console driver tries to touch scatterlist structure sgl in
    sg_init_table(), but the region is out of bound.

To avoid the case, a kernel should check whether pipe->nrbufs is empty or not
when splice_write is executed in the virtio-console driver.

V3: Add Reviewed-by lines and stable@ line in sign-off area.

Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -932,6 +932,13 @@ static ssize_t port_fops_splice_write(st
 	if (is_rproc_serial(port->out_vq->vdev))
 		return -EINVAL;
 
+	/*
+	 * pipe->nrbufs == 0 means there are no data to transfer,
+	 * so this returns just 0 for no data.
+	 */
+	if (!pipe->nrbufs)
+		return 0;
+
 	ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK);
 	if (ret < 0)
 		return ret;

[ 33/60] virtio/console: Add pipe_lock/unlock for splice_write

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>

commit 2b4fbf029dff5a28d9bf646346dea891ec43398a upstream.

Add pipe_lock/unlock for splice_write to avoid oops by following competition:

(1) An application gets fds of a trace buffer, virtio-serial, pipe.
(2) The application does fork()
(3) The processes execute splice_read(trace buffer) and
    splice_write(virtio-serial) via same pipe.

        <parent>                   <child>
  get fds of a trace buffer,
         virtio-serial, pipe
          |
        fork()----------create--------+
          |                           |
      splice(read)                    |           ---+
      splice(write)                   |              +-- no competition
          |                       splice(read)       |
          |                       splice(write)   ---+
          |                           |
      splice(read)                    |
      splice(write)               splice(read)    ------ competition
          |                       splice(write)

Two processes share a pipe_inode_info structure. If the child execute
splice(read) when the parent tries to execute splice(write), the
structure can be broken. Existing virtio-serial driver does not get
lock for the structure in splice_write, so this competition will induce
oops.

<oops messages>
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
 IP: [<ffffffff811a6b5f>] splice_from_pipe_feed+0x6f/0x130
 PGD 7223e067 PUD 72391067 PMD 0
 Oops: 0000 [#1] SMP
 Modules linked in: lockd bnep bluetooth rfkill sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore pcspkr virtio_net virtio_balloon i2c_piix4 i2c_core microcode uinput floppy
 CPU: 0 PID: 1072 Comm: compete-test Not tainted 3.10.0ws+ #55
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
 task: ffff880071b98000 ti: ffff88007b55e000 task.ti: ffff88007b55e000
 RIP: 0010:[<ffffffff811a6b5f>]  [<ffffffff811a6b5f>] splice_from_pipe_feed+0x6f/0x130
 RSP: 0018:ffff88007b55fd78  EFLAGS: 00010287
 RAX: 0000000000000000 RBX: ffff88007b55fe20 RCX: 0000000000000000
 RDX: 0000000000001000 RSI: ffff88007a95ba30 RDI: ffff880036f9e6c0
 RBP: ffff88007b55fda8 R08: 00000000000006ec R09: ffff880077626708
 R10: 0000000000000003 R11: ffffffff8139ca59 R12: ffff88007a95ba30
 R13: 0000000000000000 R14: ffffffff8139dd00 R15: ffff880036f9e6c0
 FS:  00007f2e2e3a0740(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000018 CR3: 0000000071bd1000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffffffff8139ca59 ffff88007b55fe20 ffff880036f9e6c0 ffffffff8139dd00
  ffff8800776266c0 ffff880077626708 ffff88007b55fde8 ffffffff811a6e8e
  ffff88007b55fde8 ffffffff8139ca59 ffff880036f9e6c0 ffff88007b55fe20
 Call Trace:
  [<ffffffff8139ca59>] ? alloc_buf.isra.13+0x39/0xb0
  [<ffffffff8139dd00>] ? virtcons_restore+0x100/0x100
  [<ffffffff811a6e8e>] __splice_from_pipe+0x7e/0x90
  [<ffffffff8139ca59>] ? alloc_buf.isra.13+0x39/0xb0
  [<ffffffff8139d739>] port_fops_splice_write+0xe9/0x140
  [<ffffffff8127a3f4>] ? selinux_file_permission+0xc4/0x120
  [<ffffffff8139d650>] ? wait_port_writable+0x1b0/0x1b0
  [<ffffffff811a6fe0>] do_splice_from+0xa0/0x110
  [<ffffffff811a951f>] SyS_splice+0x5ff/0x6b0
  [<ffffffff8161facf>] tracesys+0xdd/0xe2
 Code: 49 8b 87 80 00 00 00 4c 8d 24 d0 8b 53 04 41 8b 44 24 0c 4d 8b 6c 24 10 39 d0 89 03 76 02 89 13 49 8b 44 24 10 4c 89 e6 4c 89 ff <ff> 50 18 85 c0 0f 85 aa 00 00 00 48 89 da 4c 89 e6 4c 89 ff 41
 RIP  [<ffffffff811a6b5f>] splice_from_pipe_feed+0x6f/0x130
  RSP <ffff88007b55fd78>
 CR2: 0000000000000018
 ---[ end trace 24572beb7764de59 ]---

V2: Fix a locking problem for error
V3: Add Reviewed-by lines and stable@ line in sign-off area

Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -936,16 +936,21 @@ static ssize_t port_fops_splice_write(st
 	 * pipe->nrbufs == 0 means there are no data to transfer,
 	 * so this returns just 0 for no data.
 	 */
-	if (!pipe->nrbufs)
-		return 0;
+	pipe_lock(pipe);
+	if (!pipe->nrbufs) {
+		ret = 0;
+		goto error_out;
+	}
 
 	ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK);
 	if (ret < 0)
-		return ret;
+		goto error_out;
 
 	buf = alloc_buf(port->out_vq, 0, pipe->nrbufs);
-	if (!buf)
-		return -ENOMEM;
+	if (!buf) {
+		ret = -ENOMEM;
+		goto error_out;
+	}
 
 	sgl.n = 0;
 	sgl.len = 0;
@@ -953,12 +958,17 @@ static ssize_t port_fops_splice_write(st
 	sgl.sg = buf->sg;
 	sg_init_table(sgl.sg, sgl.size);
 	ret = __splice_from_pipe(pipe, &sd, pipe_to_sg);
+	pipe_unlock(pipe);
 	if (likely(ret > 0))
 		ret = __send_to_port(port, buf->sg, sgl.n, sgl.len, buf, true);
 
 	if (unlikely(ret <= 0))
 		free_buf(buf, true);
 	return ret;
+
+error_out:
+	pipe_unlock(pipe);
+	return ret;
 }
 
 static unsigned int port_fops_poll(struct file *filp, poll_table *wait)

[ 34/60] virtio: console: fix race with port unplug and open/close

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amit Shah <amit.shah@redhat.com>

commit 057b82be3ca3d066478e43b162fc082930a746c9 upstream.

There's a window between find_port_by_devt() returning a port and us
taking a kref on the port, where the port could get unplugged.  Fix it
by taking the reference in find_port_by_devt() itself.

Problem reported and analyzed by Mateusz Guzik.

Reported-by: Mateusz Guzik <mguzik@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -272,9 +272,12 @@ static struct port *find_port_by_devt_in
 	unsigned long flags;
 
 	spin_lock_irqsave(&portdev->ports_lock, flags);
-	list_for_each_entry(port, &portdev->ports, list)
-		if (port->cdev->dev == dev)
+	list_for_each_entry(port, &portdev->ports, list) {
+		if (port->cdev->dev == dev) {
+			kref_get(&port->kref);
 			goto out;
+		}
+	}
 	port = NULL;
 out:
 	spin_unlock_irqrestore(&portdev->ports_lock, flags);
@@ -1036,14 +1039,10 @@ static int port_fops_open(struct inode *
 	struct port *port;
 	int ret;
 
+	/* We get the port with a kref here */
 	port = find_port_by_devt(cdev->dev);
 	filp->private_data = port;
 
-	/* Prevent against a port getting hot-unplugged at the same time */
-	spin_lock_irq(&port->portdev->ports_lock);
-	kref_get(&port->kref);
-	spin_unlock_irq(&port->portdev->ports_lock);
-
 	/*
 	 * Don't allow opening of console port devices -- that's done
 	 * via /dev/hvc

[ 35/60] virtio: console: fix race in port_fops_open() and port unplug

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amit Shah <amit.shah@redhat.com>

commit 671bdea2b9f210566610603ecbb6584c8a201c8c upstream.

Between open() being called and processed, the port can be unplugged.
Check if this happened, and bail out.

A simple test script to reproduce this is:

while true; do for i in $(seq 1 100); do echo $i > /dev/vport0p3; done; done;

This opens and closes the port a lot of times; unplugging the port while
this is happening triggers the bug.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1041,6 +1041,10 @@ static int port_fops_open(struct inode *
 
 	/* We get the port with a kref here */
 	port = find_port_by_devt(cdev->dev);
+	if (!port) {
+		/* Port was unplugged before we could proceed */
+		return -ENXIO;
+	}
 	filp->private_data = port;
 
 	/*

[ 36/60] virtio: console: clean up port data immediately at time of unplug

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amit Shah <amit.shah@redhat.com>

commit ea3768b4386a8d1790f4cc9a35de4f55b92d6442 upstream.

We used to keep the port's char device structs and the /sys entries
around till the last reference to the port was dropped.  This is
actually unnecessary, and resulted in buggy behaviour:

1. Open port in guest
2. Hot-unplug port
3. Hot-plug a port with the same 'name' property as the unplugged one

This resulted in hot-plug being unsuccessful, as a port with the same
name already exists (even though it was unplugged).

This behaviour resulted in a warning message like this one:

-------------------8<---------------------------------------
WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted)
Hardware name: KVM
sysfs: cannot create duplicate filename
'/devices/pci0000:00/0000:00:04.0/virtio0/virtio-ports/vport0p1'

Call Trace:
 [<ffffffff8106b607>] ? warn_slowpath_common+0x87/0xc0
 [<ffffffff8106b6f6>] ? warn_slowpath_fmt+0x46/0x50
 [<ffffffff811f2319>] ? sysfs_add_one+0xc9/0x130
 [<ffffffff811f23e8>] ? create_dir+0x68/0xb0
 [<ffffffff811f2469>] ? sysfs_create_dir+0x39/0x50
 [<ffffffff81273129>] ? kobject_add_internal+0xb9/0x260
 [<ffffffff812733d8>] ? kobject_add_varg+0x38/0x60
 [<ffffffff812734b4>] ? kobject_add+0x44/0x70
 [<ffffffff81349de4>] ? get_device_parent+0xf4/0x1d0
 [<ffffffff8134b389>] ? device_add+0xc9/0x650

-------------------8<---------------------------------------

Instead of relying on guest applications to release all references to
the ports, we should go ahead and unregister the port from all the core
layers.  Any open/read calls on the port will then just return errors,
and an unplug/plug operation on the host will succeed as expected.

This also caused buggy behaviour in case of the device removal (not just
a port): when the device was removed (which means all ports on that
device are removed automatically as well), the ports with active
users would clean up only when the last references were dropped -- and
it would be too late then to be referencing char device pointers,
resulting in oopses:

-------------------8<---------------------------------------
PID: 6162   TASK: ffff8801147ad500  CPU: 0   COMMAND: "cat"
 #0 [ffff88011b9d5a90] machine_kexec at ffffffff8103232b
 #1 [ffff88011b9d5af0] crash_kexec at ffffffff810b9322
 #2 [ffff88011b9d5bc0] oops_end at ffffffff814f4a50
 #3 [ffff88011b9d5bf0] die at ffffffff8100f26b
 #4 [ffff88011b9d5c20] do_general_protection at ffffffff814f45e2
 #5 [ffff88011b9d5c50] general_protection at ffffffff814f3db5
    [exception RIP: strlen+2]
    RIP: ffffffff81272ae2  RSP: ffff88011b9d5d00  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff880118901c18  RCX: 0000000000000000
    RDX: ffff88011799982c  RSI: 00000000000000d0  RDI: 3a303030302f3030
    RBP: ffff88011b9d5d38   R8: 0000000000000006   R9: ffffffffa0134500
    R10: 0000000000001000  R11: 0000000000001000  R12: ffff880117a1cc10
    R13: 00000000000000d0  R14: 0000000000000017  R15: ffffffff81aff700
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #6 [ffff88011b9d5d00] kobject_get_path at ffffffff8126dc5d
 #7 [ffff88011b9d5d40] kobject_uevent_env at ffffffff8126e551
 #8 [ffff88011b9d5dd0] kobject_uevent at ffffffff8126e9eb
 #9 [ffff88011b9d5de0] device_del at ffffffff813440c7

-------------------8<---------------------------------------

So clean up when we have all the context, and all that's left to do when
the references to the port have dropped is to free up the port struct
itself.

Reported-by: chayang <chayang@redhat.com>
Reported-by: YOGANANTH SUBRAMANIAN <anantyog@in.ibm.com>
Reported-by: FuXiangChun <xfu@redhat.com>
Reported-by: Qunfang Zhang <qzhang@redhat.com>
Reported-by: Sibiao Luo <sluo@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1518,14 +1518,6 @@ static void remove_port(struct kref *kre
 
 	port = container_of(kref, struct port, kref);
 
-	sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
-	device_destroy(pdrvdata.class, port->dev->devt);
-	cdev_del(port->cdev);
-
-	kfree(port->name);
-
-	debugfs_remove(port->debugfs_file);
-
 	kfree(port);
 }
 
@@ -1583,6 +1575,14 @@ static void unplug_port(struct port *por
 	 */
 	port->portdev = NULL;
 
+	sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
+	device_destroy(pdrvdata.class, port->dev->devt);
+	cdev_del(port->cdev);
+
+	kfree(port->name);
+
+	debugfs_remove(port->debugfs_file);
+
 	/*
 	 * Locks around here are not necessary - a port can't be
 	 * opened after we removed the port struct from ports_list

[ 37/60] virtio: console: fix raising SIGIO after port unplug

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amit Shah <amit.shah@redhat.com>

commit 92d3453815fbe74d539c86b60dab39ecdf01bb99 upstream.

SIGIO should be sent when a port gets unplugged.  It should only be sent
to prcesses that have the port opened, and have asked for SIGIO to be
delivered.  We were clearing out guest_connected before calling
send_sigio_to_port(), resulting in a sigio not getting sent to
processes.

Fix by setting guest_connected to false after invoking the sigio
function.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1551,12 +1551,14 @@ static void unplug_port(struct port *por
 	spin_unlock_irq(&port->portdev->ports_lock);
 
 	if (port->guest_connected) {
+		/* Let the app know the port is going down. */
+		send_sigio_to_port(port);
+
+		/* Do this after sigio is actually sent */
 		port->guest_connected = false;
 		port->host_connected = false;
-		wake_up_interruptible(&port->waitqueue);
 
-		/* Let the app know the port is going down. */
-		send_sigio_to_port(port);
+		wake_up_interruptible(&port->waitqueue);
 	}
 
 	if (is_console_port(port)) {

[ 38/60] virtio: console: return -ENODEV on all read operations after unplug

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amit Shah <amit.shah@redhat.com>

commit 96f97a83910cdb9d89d127c5ee523f8fc040a804 upstream.

If a port gets unplugged while a user is blocked on read(), -ENODEV is
returned.  However, subsequent read()s returned 0, indicating there's no
host-side connection (but not indicating the device went away).

This also happened when a port was unplugged and the user didn't have
any blocking operation pending.  If the user didn't monitor the SIGIO
signal, they won't have a chance to find out if the port went away.

Fix by returning -ENODEV on all read()s after the port gets unplugged.
write() already behaves this way.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -749,6 +749,10 @@ static ssize_t port_fops_read(struct fil
 
 	port = filp->private_data;
 
+	/* Port is hot-unplugged. */
+	if (!port->guest_connected)
+		return -ENODEV;
+
 	if (!port_has_data(port)) {
 		/*
 		 * If nothing's connected on the host just return 0 in
@@ -765,7 +769,7 @@ static ssize_t port_fops_read(struct fil
 		if (ret < 0)
 			return ret;
 	}
-	/* Port got hot-unplugged. */
+	/* Port got hot-unplugged while we were waiting above. */
 	if (!port->guest_connected)
 		return -ENODEV;
 	/*

[ 39/60] drm/cirrus: Invalidate page tables when pinning a BO

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Srb <msrb@suse.com>

commit 109a51598869a39fdcec2d49672a9a39b6d89481 upstream.

This is a cirrus version of Egbert Eich's patch for mgag200.

Without bo.bdev->dev_mapping set, the ttm_bo_unmap_virtual_locked
called from ttm_bo_handle_move_mem returns with no effect. If any
application accessed the memory before it was moved, it will
access wrong memory next time. This causes crashes when changing
resolution down.

Signed-off-by: Michal Srb <msrb@suse.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/cirrus/cirrus_ttm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/cirrus/cirrus_ttm.c
+++ b/drivers/gpu/drm/cirrus/cirrus_ttm.c
@@ -353,6 +353,7 @@ int cirrus_bo_create(struct drm_device *
 
 	cirrusbo->gem.driver_private = NULL;
 	cirrusbo->bo.bdev = &cirrus->ttm.bdev;
+	cirrusbo->bo.bdev->dev_mapping = dev->dev_mapping;
 
 	cirrus_ttm_placement(cirrusbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
 

[ 40/60] drm/mgag200: Invalidate page tables when pinning a BO

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Egbert Eich <eich@suse.com>

commit ecaac1c866bcda4780a963b3d18cd310d971aea3 upstream.

When a BO gets pinned the placement may get changed. If the memory is
mapped into user space and user space has already accessed the mapped
range the page tables are set up but now point to the wrong memory.
Set bo.mdev->dev_mapping in mgag200_bo_create() to make sure that
ttm_bo_unmap_virtual() called from ttm_bo_handle_move_mem() will take
care of this.

v2: Don't call ttm_bo_unmap_virtual() in mgag200_bo_pin(), fix comment.

Signed-off-by: Egbert Eich <eich@suse.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/mgag200/mgag200_ttm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/mgag200/mgag200_ttm.c
+++ b/drivers/gpu/drm/mgag200/mgag200_ttm.c
@@ -347,6 +347,7 @@ int mgag200_bo_create(struct drm_device
 
 	mgabo->gem.driver_private = NULL;
 	mgabo->bo.bdev = &mdev->ttm.bdev;
+	mgabo->bo.bdev->dev_mapping = dev->dev_mapping;
 
 	mgag200_ttm_placement(mgabo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
 

[ 41/60] drm/ast: invalidate page tables when pinning a BO

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit 3ac65259328324de323dc006b52ff7c1a5b18d19 upstream.

same fix as cirrus and mgag200.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/ast/ast_ttm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/ast/ast_ttm.c
+++ b/drivers/gpu/drm/ast/ast_ttm.c
@@ -348,6 +348,7 @@ int ast_bo_create(struct drm_device *dev
 
 	astbo->gem.driver_private = NULL;
 	astbo->bo.bdev = &ast->ttm.bdev;
+	astbo->bo.bdev->dev_mapping = dev->dev_mapping;
 
 	ast_ttm_placement(astbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
 

[ 42/60] drm: Dont pass negative delta to ktime_sub_ns()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michel Dänzer <michel.daenzer@amd.com>

commit e91abf80a0998f326107874c88d549f94839f13c upstream.

It takes an unsigned value. This happens not to blow up on 64-bit
architectures, but it does on 32-bit, causing
drm_calc_vbltimestamp_from_scanoutpos() to calculate totally bogus
timestamps for vblank events. Which in turn causes e.g. gnome-shell to
hang after a DPMS off cycle with current xf86-video-ati Git.

[airlied: regression introduced in drm: use monotonic time in drm_calc_vbltimestamp_from_scanoutpos]

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59836
Tested-by: shui yangwei <yangweix.shui@intel.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_irq.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -708,7 +708,10 @@ int drm_calc_vbltimestamp_from_scanoutpo
 	/* Subtract time delta from raw timestamp to get final
 	 * vblank_time timestamp for end of vblank.
 	 */
-	etime = ktime_sub_ns(etime, delta_ns);
+	if (delta_ns < 0)
+		etime = ktime_add_ns(etime, -delta_ns);
+	else
+		etime = ktime_sub_ns(etime, delta_ns);
 	*vblank_time = ktime_to_timeval(etime);
 
 	DRM_DEBUG("crtc %d : v %d p(%d,%d)@ %ld.%ld -> %ld.%ld [e %d us, %d rep]\n",

[ 43/60] drm/radeon: select audio dto based on encoder id for DCE3

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit e1accbf0543eecfdb161131208c3dfefee22d61f upstream.

There are two audio dtos on radeon asics that you can
select between.  Normally, dto0 is used for hdmi and
dto1 for DP, but it seems that the dto is somehow
tied to the encoders on DCE3 asics.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=67435

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/r600_hdmi.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -242,9 +242,15 @@ void r600_audio_set_dto(struct drm_encod
 		/* according to the reg specs, this should DCE3.2 only, but in
 		 * practice it seems to cover DCE3.0 as well.
 		 */
-		WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
-		WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
-		WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+		if (dig->dig_encoder == 0) {
+			WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
+			WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
+			WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+		} else {
+			WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100);
+			WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100);
+			WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
+		}
 	} else {
 		/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
 		WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |

[ 44/60] drm/radeon: stop sending invalid UVD destroy msg

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian König <christian.koenig@amd.com>

commit 641a00593f7d07eab778fbabf546fb68fff3d5ce upstream.

We also need to check the handle.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_uvd.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -218,8 +218,8 @@ void radeon_uvd_free_handles(struct rade
 {
 	int i, r;
 	for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
-		if (rdev->uvd.filp[i] == filp) {
-			uint32_t handle = atomic_read(&rdev->uvd.handles[i]);
+		uint32_t handle = atomic_read(&rdev->uvd.handles[i]);
+		if (handle != 0 && rdev->uvd.filp[i] == filp) {
 			struct radeon_fence *fence;
 
 			r = radeon_uvd_get_destroy_msg(rdev,

[ 45/60] ext4: allow the mount options nodelalloc and data=journal

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 59d9fa5c2e9086db11aa287bb4030151d0095a17 upstream.

Commit 26092bf ("ext4: use a table-driven handler for mount options")
wrongly disallows the specifying the mount options nodelalloc and
data=journal simultaneously.  This is incorrect; it should have only
disallowed the combination of delalloc and data=journal
simultaneously.

Reported-by: Piotr Sarna <p.sarna@partner.samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1341,7 +1341,7 @@ static const struct mount_opts {
 	{Opt_delalloc, EXT4_MOUNT_DELALLOC,
 	 MOPT_EXT4_ONLY | MOPT_SET | MOPT_EXPLICIT},
 	{Opt_nodelalloc, EXT4_MOUNT_DELALLOC,
-	 MOPT_EXT4_ONLY | MOPT_CLEAR | MOPT_EXPLICIT},
+	 MOPT_EXT4_ONLY | MOPT_CLEAR},
 	{Opt_journal_checksum, EXT4_MOUNT_JOURNAL_CHECKSUM,
 	 MOPT_EXT4_ONLY | MOPT_SET},
 	{Opt_journal_async_commit, (EXT4_MOUNT_JOURNAL_ASYNC_COMMIT |

[ 46/60] ext4: fix mount/remount error messages for incompatible mount options

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Piotr Sarna <p.sarna@partner.samsung.com>

commit 6ae6514b33f941d3386da0dfbe2942766eab1577 upstream.

Commit 5688978 ("ext4: improve handling of conflicting mount options")
introduced incorrect messages shown while choosing wrong mount options.

First of all, both cases of incorrect mount options,
"data=journal,delalloc" and "data=journal,dioread_nolock" result in
the same error message.

Secondly, the problem above isn't solved for remount option: the
mismatched parameter is simply ignored.  Moreover, ext4_msg states
that remount with options "data=journal,delalloc" succeeded, which is
not true.

To fix it up, I added a simple check after parse_options() call to
ensure that data=journal and delalloc/dioread_nolock parameters are
not present at the same time.

Signed-off-by: Piotr Sarna <p.sarna@partner.samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3445,7 +3445,7 @@ static int ext4_fill_super(struct super_
 		}
 		if (test_opt(sb, DIOREAD_NOLOCK)) {
 			ext4_msg(sb, KERN_ERR, "can't mount with "
-				 "both data=journal and delalloc");
+				 "both data=journal and dioread_nolock");
 			goto failed_mount;
 		}
 		if (test_opt(sb, DELALLOC))
@@ -4646,6 +4646,21 @@ static int ext4_remount(struct super_blo
 		goto restore_opts;
 	}
 
+	if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
+		if (test_opt2(sb, EXPLICIT_DELALLOC)) {
+			ext4_msg(sb, KERN_ERR, "can't mount with "
+				 "both data=journal and delalloc");
+			err = -EINVAL;
+			goto restore_opts;
+		}
+		if (test_opt(sb, DIOREAD_NOLOCK)) {
+			ext4_msg(sb, KERN_ERR, "can't mount with "
+				 "both data=journal and dioread_nolock");
+			err = -EINVAL;
+			goto restore_opts;
+		}
+	}
+
 	if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
 		ext4_abort(sb, "Abort forced by user");
 

[ 47/60] ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit cde2d7a796f7e895e25b43471ed658079345636d upstream.

Previously we weren't swapping only some of the extent_status LRU
fields during the processing of the EXT4_IOC_SWAP_BOOT ioctl.  The
much safer thing to do is to just completely flush the extent status
tree when doing the swap.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ioctl.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -77,8 +77,10 @@ static void swap_inode_data(struct inode
 	memswap(ei1->i_data, ei2->i_data, sizeof(ei1->i_data));
 	memswap(&ei1->i_flags, &ei2->i_flags, sizeof(ei1->i_flags));
 	memswap(&ei1->i_disksize, &ei2->i_disksize, sizeof(ei1->i_disksize));
-	memswap(&ei1->i_es_tree, &ei2->i_es_tree, sizeof(ei1->i_es_tree));
-	memswap(&ei1->i_es_lru_nr, &ei2->i_es_lru_nr, sizeof(ei1->i_es_lru_nr));
+	ext4_es_remove_extent(inode1, 0, EXT_MAX_BLOCKS);
+	ext4_es_remove_extent(inode2, 0, EXT_MAX_BLOCKS);
+	ext4_es_lru_del(inode1);
+	ext4_es_lru_del(inode2);
 
 	isize = i_size_read(inode1);
 	i_size_write(inode1, i_size_read(inode2));

[ 48/60] cifs: extend the buffer length enought for sprintf() using

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Gang <gang.chen@asianux.com>

commit 057d6332b24a4497c55a761c83c823eed9e3f23b upstream.

For cifs_set_cifscreds() in "fs/cifs/connect.c", 'desc' buffer length
is 'CIFSCREDS_DESC_SIZE' (56 is less than 256), and 'ses->domainName'
length may be "255 + '\0'".

The related sprintf() may cause memory overflow, so need extend related
buffer enough to hold all things.

It is also necessary to be sure of 'ses->domainName' must be less than
256, and define the related macro instead of hard code number '256'.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Scott Lovenberg <scott.lovenberg@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/cifsencrypt.c |    2 +-
 fs/cifs/cifsglob.h    |    1 +
 fs/cifs/connect.c     |    7 ++++---
 fs/cifs/sess.c        |    6 +++---
 4 files changed, 9 insertions(+), 7 deletions(-)

--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -389,7 +389,7 @@ find_domain_name(struct cifs_ses *ses, c
 		if (blobptr + attrsize > blobend)
 			break;
 		if (type == NTLMSSP_AV_NB_DOMAIN_NAME) {
-			if (!attrsize)
+			if (!attrsize || attrsize >= CIFS_MAX_DOMAINNAME_LEN)
 				break;
 			if (!ses->domainName) {
 				ses->domainName =
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -44,6 +44,7 @@
 #define MAX_TREE_SIZE (2 + MAX_SERVER_SIZE + 1 + MAX_SHARE_SIZE + 1)
 #define MAX_SERVER_SIZE 15
 #define MAX_SHARE_SIZE 80
+#define CIFS_MAX_DOMAINNAME_LEN 256 /* max domain name length */
 #define MAX_USERNAME_SIZE 256	/* reasonable maximum for current servers */
 #define MAX_PASSWORD_SIZE 512	/* max for windows seems to be 256 wide chars */
 
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1662,7 +1662,8 @@ cifs_parse_mount_options(const char *mou
 			if (string == NULL)
 				goto out_nomem;
 
-			if (strnlen(string, 256) == 256) {
+			if (strnlen(string, CIFS_MAX_DOMAINNAME_LEN)
+					== CIFS_MAX_DOMAINNAME_LEN) {
 				printk(KERN_WARNING "CIFS: domain name too"
 						    " long\n");
 				goto cifs_parse_mount_err;
@@ -2288,8 +2289,8 @@ cifs_put_smb_ses(struct cifs_ses *ses)
 
 #ifdef CONFIG_KEYS
 
-/* strlen("cifs:a:") + INET6_ADDRSTRLEN + 1 */
-#define CIFSCREDS_DESC_SIZE (7 + INET6_ADDRSTRLEN + 1)
+/* strlen("cifs:a:") + CIFS_MAX_DOMAINNAME_LEN + 1 */
+#define CIFSCREDS_DESC_SIZE (7 + CIFS_MAX_DOMAINNAME_LEN + 1)
 
 /* Populate username and pw fields from keyring if possible */
 static int
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -198,7 +198,7 @@ static void unicode_domain_string(char *
 		bytes_ret = 0;
 	} else
 		bytes_ret = cifs_strtoUTF16((__le16 *) bcc_ptr, ses->domainName,
-					    256, nls_cp);
+					    CIFS_MAX_DOMAINNAME_LEN, nls_cp);
 	bcc_ptr += 2 * bytes_ret;
 	bcc_ptr += 2;  /* account for null terminator */
 
@@ -256,8 +256,8 @@ static void ascii_ssetup_strings(char **
 
 	/* copy domain */
 	if (ses->domainName != NULL) {
-		strncpy(bcc_ptr, ses->domainName, 256);
-		bcc_ptr += strnlen(ses->domainName, 256);
+		strncpy(bcc_ptr, ses->domainName, CIFS_MAX_DOMAINNAME_LEN);
+		bcc_ptr += strnlen(ses->domainName, CIFS_MAX_DOMAINNAME_LEN);
 	} /* else we will send a null domain name
 	     so the server will default to its own domain */
 	*bcc_ptr = 0;

[ 49/60] cifs: dont instantiate new dentries in readdir for inodes that need to be revalidated immediately

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit 757c4f6260febff982276818bb946df89c1105aa upstream.

David reported that commit c2b93e06 (cifs: only set ops for inodes in
I_NEW state) caused a regression with mfsymlinks. Prior to that patch,
if a mfsymlink dentry was instantiated at readdir time, the inode would
get a new set of ops when it was revalidated. After that patch, this
did not occur.

This patch addresses this by simply skipping instantiating dentries in
the readdir codepath when we know that they will need to be immediately
revalidated. The next attempt to use that dentry will cause a new lookup
to occur (which is basically what we want to happen anyway).

Reported-and-Tested-by: David McBride <dwm37@cam.ac.uk>
Cc: "Stefan (metze) Metzmacher" <metze@samba.org>
Cc: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/readdir.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -111,6 +111,14 @@ cifs_prime_dcache(struct dentry *parent,
 			return;
 	}
 
+	/*
+	 * If we know that the inode will need to be revalidated immediately,
+	 * then don't create a new dentry for it. We'll end up doing an on
+	 * the wire call either way and this spares us an invalidation.
+	 */
+	if (fattr->cf_flags & CIFS_FATTR_NEED_REVAL)
+		return;
+
 	dentry = d_alloc(parent, name);
 	if (!dentry)
 		return;

[ 50/60] zram: allow request end to coincide with disksize

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

commit 75c7caf5a052ffd8db3312fa7864ee2d142890c4 upstream.

Pass valid_io_request() checks if request end coincides with disksize
(end equals bound), only fail if we attempt to read beyond the bound.

mkfs.ext2 produces numerous errors:
[ 2164.632747] quiet_error: 1 callbacks suppressed
[ 2164.633260] Buffer I/O error on device zram0, logical block 153599
[ 2164.633265] lost page write due to I/O error on zram0

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Backlund <tmb@mageia.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/zram/zram_drv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -432,7 +432,7 @@ static inline int valid_io_request(struc
 	end = start + (bio->bi_size >> SECTOR_SHIFT);
 	bound = zram->disksize >> SECTOR_SHIFT;
 	/* out of range range */
-	if (unlikely(start >= bound || end >= bound || start > end))
+	if (unlikely(start >= bound || end > bound || start > end))
 		return 0;
 
 	/* I/O request is valid */

[ 51/60] usb: core: dont try to reset_device() a port that got just disconnected

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julius Werner <jwerner@chromium.org>

commit 481f2d4f89f87a0baa26147f323380e31cfa7c44 upstream.

The USB hub driver's event handler contains a check to catch SuperSpeed
devices that transitioned into the SS.Inactive state and tries to fix
them with a reset. It decides whether to do a plain hub port reset or
call the usb_reset_device() function based on whether there was a device
attached to the port.

However, there are device/hub combinations (found with a JetFlash
Transcend mass storage stick (8564:1000) on the root hub of an Intel
LynxPoint PCH) which can transition to the SS.Inactive state on
disconnect (and stay there long enough for the host to notice). In this
case, above-mentioned reset check will call usb_reset_device() on the
stale device data structure. The kernel will send pointless LPM control
messages to the no longer connected device address and can even cause
several 5 second khubd stalls on some (buggy?) host controllers, before
finally accepting the device's fate amongst a flurry of error messages.

This patch makes the choice of reset dependent on the port status that
has just been read from the hub in addition to the existence of an
in-kernel data structure for the device, and only proceeds with the more
extensive reset if both are valid.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4796,7 +4796,8 @@ static void hub_events(void)
 					hub->ports[i - 1]->child;
 
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
-				if (!udev) {
+				if (!udev || !(portstatus &
+						USB_PORT_STAT_CONNECTION)) {
 					status = hub_port_reset(hub, i,
 							NULL, HUB_BH_RESET_TIME,
 							true);
@@ -4806,8 +4807,8 @@ static void hub_events(void)
 					usb_lock_device(udev);
 					status = usb_reset_device(udev);
 					usb_unlock_device(udev);
+					connect_change = 0;
 				}
-				connect_change = 0;
 			}
 
 			if (connect_change)

[ 52/60] debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs)

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <oleg@redhat.com>

commit 776164c1faac4966ab14418bb0922e1820da1d19 upstream.

debugfs_remove_recursive() is wrong,

1. it wrongly assumes that !list_empty(d_subdirs) means that this
   dir should be removed.

   This is not that bad by itself, but:

2. if d_subdirs does not becomes empty after __debugfs_remove()
   it gives up and silently fails, it doesn't even try to remove
   other entries.

   However ->d_subdirs can be non-empty because it still has the
   already deleted !debugfs_positive() entries.

3. simple_release_fs() is called even if __debugfs_remove() fails.

Suppose we have

	dir1/
		dir2/
			file2
		file1

and someone opens dir1/dir2/file2.

Now, debugfs_remove_recursive(dir1/dir2) succeeds, and dir1/dir2 goes
away.

But debugfs_remove_recursive(dir1) silently fails and doesn't remove
this directory. Because it tries to delete (the already deleted)
dir1/dir2/file2 again and then fails due to "Avoid infinite loop"
logic.

Test-case:

	#!/bin/sh

	cd /sys/kernel/debug/tracing
	echo 'p:probe/sigprocmask sigprocmask' >> kprobe_events
	sleep 1000 < events/probe/sigprocmask/id &
	echo -n >| kprobe_events

	[ -d events/probe ] && echo "ERR!! failed to rm probe"

And after that it is not possible to create another probe entry.

With this patch debugfs_remove_recursive() skips !debugfs_positive()
files although this is not strictly needed. The most important change
is that it does not try to make ->d_subdirs empty, it simply scans
the whole list(s) recursively and removes as much as possible.

Link: http://lkml.kernel.org/r/20130726151256.GC19472@redhat.com

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/debugfs/inode.c |   69 ++++++++++++++++-------------------------------------
 1 file changed, 22 insertions(+), 47 deletions(-)

--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -533,8 +533,7 @@ EXPORT_SYMBOL_GPL(debugfs_remove);
  */
 void debugfs_remove_recursive(struct dentry *dentry)
 {
-	struct dentry *child;
-	struct dentry *parent;
+	struct dentry *child, *next, *parent;
 
 	if (IS_ERR_OR_NULL(dentry))
 		return;
@@ -544,61 +543,37 @@ void debugfs_remove_recursive(struct den
 		return;
 
 	parent = dentry;
+ down:
 	mutex_lock(&parent->d_inode->i_mutex);
+	list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) {
+		if (!debugfs_positive(child))
+			continue;
 
-	while (1) {
-		/*
-		 * When all dentries under "parent" has been removed,
-		 * walk up the tree until we reach our starting point.
-		 */
-		if (list_empty(&parent->d_subdirs)) {
-			mutex_unlock(&parent->d_inode->i_mutex);
-			if (parent == dentry)
-				break;
-			parent = parent->d_parent;
-			mutex_lock(&parent->d_inode->i_mutex);
-		}
-		child = list_entry(parent->d_subdirs.next, struct dentry,
-				d_u.d_child);
- next_sibling:
-
-		/*
-		 * If "child" isn't empty, walk down the tree and
-		 * remove all its descendants first.
-		 */
+		/* perhaps simple_empty(child) makes more sense */
 		if (!list_empty(&child->d_subdirs)) {
 			mutex_unlock(&parent->d_inode->i_mutex);
 			parent = child;
-			mutex_lock(&parent->d_inode->i_mutex);
-			continue;
+			goto down;
 		}
-		__debugfs_remove(child, parent);
-		if (parent->d_subdirs.next == &child->d_u.d_child) {
-			/*
-			 * Try the next sibling.
-			 */
-			if (child->d_u.d_child.next != &parent->d_subdirs) {
-				child = list_entry(child->d_u.d_child.next,
-						   struct dentry,
-						   d_u.d_child);
-				goto next_sibling;
-			}
-
-			/*
-			 * Avoid infinite loop if we fail to remove
-			 * one dentry.
-			 */
-			mutex_unlock(&parent->d_inode->i_mutex);
-			break;
-		}
-		simple_release_fs(&debugfs_mount, &debugfs_mount_count);
+ up:
+		if (!__debugfs_remove(child, parent))
+			simple_release_fs(&debugfs_mount, &debugfs_mount_count);
 	}
 
-	parent = dentry->d_parent;
+	mutex_unlock(&parent->d_inode->i_mutex);
+	child = parent;
+	parent = parent->d_parent;
 	mutex_lock(&parent->d_inode->i_mutex);
-	__debugfs_remove(dentry, parent);
+
+	if (child != dentry) {
+		next = list_entry(child->d_u.d_child.next, struct dentry,
+					d_u.d_child);
+		goto up;
+	}
+
+	if (!__debugfs_remove(child, parent))
+		simple_release_fs(&debugfs_mount, &debugfs_mount_count);
 	mutex_unlock(&parent->d_inode->i_mutex);
-	simple_release_fs(&debugfs_mount, &debugfs_mount_count);
 }
 EXPORT_SYMBOL_GPL(debugfs_remove_recursive);
 

[ 53/60] reiserfs: fix deadlock in umount

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 672fe15d091ce76d6fb98e489962e9add7c1ba4c upstream.

Since remove_proc_entry() started to wait for IO in progress (i.e.
since 2007 or so), the locking in fs/reiserfs/proc.c became wrong;
if procfs read happens between the moment when umount() locks the
victim superblock and removal of /proc/fs/reiserfs/<device>/*,
we'll get a deadlock - read will wait for s_umount (in sget(),
called by r_start()), while umount will wait in remove_proc_entry()
for that read to finish, holding s_umount all along.

Fortunately, the same change allows a much simpler race avoidance -
all we need to do is remove the procfs entries in the very beginning
of reiserfs ->kill_sb(); that'll guarantee that pointer to superblock
will remain valid for the duration for procfs IO, so we don't need
sget() to keep the sucker alive.  As the matter of fact, we can
get rid of the home-grown iterator completely, and use single_open()
instead.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/reiserfs/procfs.c |   99 +++++++++------------------------------------------
 fs/reiserfs/super.c  |    3 -
 2 files changed, 20 insertions(+), 82 deletions(-)

--- a/fs/reiserfs/procfs.c
+++ b/fs/reiserfs/procfs.c
@@ -19,12 +19,13 @@
 /*
  * LOCKING:
  *
- * We rely on new Alexander Viro's super-block locking.
+ * These guys are evicted from procfs as the very first step in ->kill_sb().
  *
  */
 
-static int show_version(struct seq_file *m, struct super_block *sb)
+static int show_version(struct seq_file *m, void *unused)
 {
+	struct super_block *sb = m->private;
 	char *format;
 
 	if (REISERFS_SB(sb)->s_properties & (1 << REISERFS_3_6)) {
@@ -66,8 +67,9 @@ static int show_version(struct seq_file
 #define DJP( x ) le32_to_cpu( jp -> x )
 #define JF( x ) ( r -> s_journal -> x )
 
-static int show_super(struct seq_file *m, struct super_block *sb)
+static int show_super(struct seq_file *m, void *unused)
 {
+	struct super_block *sb = m->private;
 	struct reiserfs_sb_info *r = REISERFS_SB(sb);
 
 	seq_printf(m, "state: \t%s\n"
@@ -128,8 +130,9 @@ static int show_super(struct seq_file *m
 	return 0;
 }
 
-static int show_per_level(struct seq_file *m, struct super_block *sb)
+static int show_per_level(struct seq_file *m, void *unused)
 {
+	struct super_block *sb = m->private;
 	struct reiserfs_sb_info *r = REISERFS_SB(sb);
 	int level;
 
@@ -186,8 +189,9 @@ static int show_per_level(struct seq_fil
 	return 0;
 }
 
-static int show_bitmap(struct seq_file *m, struct super_block *sb)
+static int show_bitmap(struct seq_file *m, void *unused)
 {
+	struct super_block *sb = m->private;
 	struct reiserfs_sb_info *r = REISERFS_SB(sb);
 
 	seq_printf(m, "free_block: %lu\n"
@@ -218,8 +222,9 @@ static int show_bitmap(struct seq_file *
 	return 0;
 }
 
-static int show_on_disk_super(struct seq_file *m, struct super_block *sb)
+static int show_on_disk_super(struct seq_file *m, void *unused)
 {
+	struct super_block *sb = m->private;
 	struct reiserfs_sb_info *sb_info = REISERFS_SB(sb);
 	struct reiserfs_super_block *rs = sb_info->s_rs;
 	int hash_code = DFL(s_hash_function_code);
@@ -261,8 +266,9 @@ static int show_on_disk_super(struct seq
 	return 0;
 }
 
-static int show_oidmap(struct seq_file *m, struct super_block *sb)
+static int show_oidmap(struct seq_file *m, void *unused)
 {
+	struct super_block *sb = m->private;
 	struct reiserfs_sb_info *sb_info = REISERFS_SB(sb);
 	struct reiserfs_super_block *rs = sb_info->s_rs;
 	unsigned int mapsize = le16_to_cpu(rs->s_v1.s_oid_cursize);
@@ -291,8 +297,9 @@ static int show_oidmap(struct seq_file *
 	return 0;
 }
 
-static int show_journal(struct seq_file *m, struct super_block *sb)
+static int show_journal(struct seq_file *m, void *unused)
 {
+	struct super_block *sb = m->private;
 	struct reiserfs_sb_info *r = REISERFS_SB(sb);
 	struct reiserfs_super_block *rs = r->s_rs;
 	struct journal_params *jp = &rs->s_v1.s_journal;
@@ -383,92 +390,24 @@ static int show_journal(struct seq_file
 	return 0;
 }
 
-/* iterator */
-static int test_sb(struct super_block *sb, void *data)
-{
-	return data == sb;
-}
-
-static int set_sb(struct super_block *sb, void *data)
-{
-	return -ENOENT;
-}
-
-struct reiserfs_seq_private {
-	struct super_block *sb;
-	int (*show) (struct seq_file *, struct super_block *);
-};
-
-static void *r_start(struct seq_file *m, loff_t * pos)
-{
-	struct reiserfs_seq_private *priv = m->private;
-	loff_t l = *pos;
-
-	if (l)
-		return NULL;
-
-	if (IS_ERR(sget(&reiserfs_fs_type, test_sb, set_sb, 0, priv->sb)))
-		return NULL;
-
-	up_write(&priv->sb->s_umount);
-	return priv->sb;
-}
-
-static void *r_next(struct seq_file *m, void *v, loff_t * pos)
-{
-	++*pos;
-	if (v)
-		deactivate_super(v);
-	return NULL;
-}
-
-static void r_stop(struct seq_file *m, void *v)
-{
-	if (v)
-		deactivate_super(v);
-}
-
-static int r_show(struct seq_file *m, void *v)
-{
-	struct reiserfs_seq_private *priv = m->private;
-	return priv->show(m, v);
-}
-
-static const struct seq_operations r_ops = {
-	.start = r_start,
-	.next = r_next,
-	.stop = r_stop,
-	.show = r_show,
-};
-
 static int r_open(struct inode *inode, struct file *file)
 {
-	struct reiserfs_seq_private *priv;
-	int ret = seq_open_private(file, &r_ops,
-				   sizeof(struct reiserfs_seq_private));
-
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-		priv = m->private;
-		priv->sb = proc_get_parent_data(inode);
-		priv->show = PDE_DATA(inode);
-	}
-	return ret;
+	return single_open(file, PDE_DATA(inode),
+				proc_get_parent_data(inode));
 }
 
 static const struct file_operations r_file_operations = {
 	.open = r_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
-	.release = seq_release_private,
-	.owner = THIS_MODULE,
+	.release = single_release,
 };
 
 static struct proc_dir_entry *proc_info_root = NULL;
 static const char proc_info_root_name[] = "fs/reiserfs";
 
 static void add_file(struct super_block *sb, char *name,
-		     int (*func) (struct seq_file *, struct super_block *))
+		     int (*func) (struct seq_file *, void *))
 {
 	proc_create_data(name, 0, REISERFS_SB(sb)->procdir,
 			 &r_file_operations, func);
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -499,6 +499,7 @@ int remove_save_link(struct inode *inode
 static void reiserfs_kill_sb(struct super_block *s)
 {
 	if (REISERFS_SB(s)) {
+		reiserfs_proc_info_done(s);
 		/*
 		 * Force any pending inode evictions to occur now. Any
 		 * inodes to be removed that have extended attributes
@@ -554,8 +555,6 @@ static void reiserfs_put_super(struct su
 				 REISERFS_SB(s)->reserved_blocks);
 	}
 
-	reiserfs_proc_info_done(s);
-
 	reiserfs_write_unlock(s);
 	mutex_destroy(&REISERFS_SB(s)->lock);
 	kfree(s->s_fs_info);

[ 54/60] drm/i915: initialize gt_lock early with other spin locks

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jani Nikula <jani.nikula@linux.intel.com>

commit 14c5cec5d0cd73e7e9d4fbea2bbfeea8f3ade871 upstream.

commit 181d1b9e31c668259d3798c521672afb8edd355c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jul 21 13:16:24 2013 +0200

    drm/i915: fix up gt init sequence fallout

moved dev_priv->gt_lock initialization after use. Do the initialization
much earlier with other spin lock initializations.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Zhouping Liu <zliu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_dma.c |    1 +
 drivers/gpu/drm/i915/intel_pm.c |    2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1514,6 +1514,7 @@ int i915_driver_load(struct drm_device *
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->gpu_error.lock);
 	spin_lock_init(&dev_priv->rps.lock);
+	spin_lock_init(&dev_priv->gt_lock);
 	mutex_init(&dev_priv->dpio_lock);
 	mutex_init(&dev_priv->rps.hw_lock);
 	mutex_init(&dev_priv->modeset_restore_lock);
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4507,8 +4507,6 @@ void intel_gt_init(struct drm_device *de
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	spin_lock_init(&dev_priv->gt_lock);
-
 	if (IS_VALLEYVIEW(dev)) {
 		dev_priv->gt.force_wake_get = vlv_force_wake_get;
 		dev_priv->gt.force_wake_put = vlv_force_wake_put;

[ 55/60] drm/radeon: fix halting UVD

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian König <christian.koenig@amd.com>

commit 2858c00d2823c83acce2a1175dbabb2cebee8678 upstream.

Removing the clock/power or resetting the VCPU can cause
hangs if that happens in the middle of a register write.

Stall the memory and register bus before putting the VCPU
into reset. Keep it in reset when unloading the module or
suspending.

v2: rebased on 3.10-stable tree

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/evergreen.c   |    3 ++-
 drivers/gpu/drm/radeon/ni.c          |    3 ++-
 drivers/gpu/drm/radeon/r600.c        |   28 +++++++++++++++++++++++-----
 drivers/gpu/drm/radeon/radeon_asic.h |    2 +-
 drivers/gpu/drm/radeon/rv770.c       |    2 ++
 drivers/gpu/drm/radeon/si.c          |    6 ++++--
 6 files changed, 34 insertions(+), 10 deletions(-)

--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -4854,10 +4854,10 @@ int evergreen_resume(struct radeon_devic
 int evergreen_suspend(struct radeon_device *rdev)
 {
 	r600_audio_fini(rdev);
+	r600_uvd_stop(rdev);
 	radeon_uvd_suspend(rdev);
 	r700_cp_stop(rdev);
 	r600_dma_stop(rdev);
-	r600_uvd_rbc_stop(rdev);
 	evergreen_irq_suspend(rdev);
 	radeon_wb_disable(rdev);
 	evergreen_pcie_gart_disable(rdev);
@@ -4988,6 +4988,7 @@ void evergreen_fini(struct radeon_device
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	evergreen_pcie_gart_fini(rdev);
+	r600_uvd_stop(rdev);
 	radeon_uvd_fini(rdev);
 	r600_vram_scratch_fini(rdev);
 	radeon_gem_fini(rdev);
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -2133,7 +2133,7 @@ int cayman_suspend(struct radeon_device
 	radeon_vm_manager_fini(rdev);
 	cayman_cp_enable(rdev, false);
 	cayman_dma_stop(rdev);
-	r600_uvd_rbc_stop(rdev);
+	r600_uvd_stop(rdev);
 	radeon_uvd_suspend(rdev);
 	evergreen_irq_suspend(rdev);
 	radeon_wb_disable(rdev);
@@ -2265,6 +2265,7 @@ void cayman_fini(struct radeon_device *r
 	radeon_vm_manager_fini(rdev);
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
+	r600_uvd_stop(rdev);
 	radeon_uvd_fini(rdev);
 	cayman_pcie_gart_fini(rdev);
 	r600_vram_scratch_fini(rdev);
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2675,12 +2675,29 @@ int r600_uvd_rbc_start(struct radeon_dev
 	return 0;
 }
 
-void r600_uvd_rbc_stop(struct radeon_device *rdev)
+void r600_uvd_stop(struct radeon_device *rdev)
 {
 	struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
 
 	/* force RBC into idle state */
 	WREG32(UVD_RBC_RB_CNTL, 0x11010101);
+
+	/* Stall UMC and register bus before resetting VCPU */
+	WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8));
+	WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3));
+	mdelay(1);
+
+	/* put VCPU into reset */
+	WREG32(UVD_SOFT_RESET, VCPU_SOFT_RESET);
+	mdelay(5);
+
+	/* disable VCPU clock */
+	WREG32(UVD_VCPU_CNTL, 0x0);
+
+	/* Unstall UMC and register bus */
+	WREG32_P(UVD_LMI_CTRL2, 0, ~(1 << 8));
+	WREG32_P(UVD_RB_ARB_CTRL, 0, ~(1 << 3));
+
 	ring->ready = false;
 }
 
@@ -2700,6 +2717,11 @@ int r600_uvd_init(struct radeon_device *
 	/* disable interupt */
 	WREG32_P(UVD_MASTINT_EN, 0, ~(1 << 1));
 
+	/* Stall UMC and register bus before resetting VCPU */
+	WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8));
+	WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3));
+	mdelay(1);
+
 	/* put LMI, VCPU, RBC etc... into reset */
 	WREG32(UVD_SOFT_RESET, LMI_SOFT_RESET | VCPU_SOFT_RESET |
 	       LBSI_SOFT_RESET | RBC_SOFT_RESET | CSM_SOFT_RESET |
@@ -2729,10 +2751,6 @@ int r600_uvd_init(struct radeon_device *
 	WREG32(UVD_MPC_SET_ALU, 0);
 	WREG32(UVD_MPC_SET_MUX, 0x88);
 
-	/* Stall UMC */
-	WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8));
-	WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3));
-
 	/* take all subblocks out of reset, except VCPU */
 	WREG32(UVD_SOFT_RESET, VCPU_SOFT_RESET);
 	mdelay(5);
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -399,7 +399,7 @@ uint64_t r600_get_gpu_clock_counter(stru
 /* uvd */
 int r600_uvd_init(struct radeon_device *rdev);
 int r600_uvd_rbc_start(struct radeon_device *rdev);
-void r600_uvd_rbc_stop(struct radeon_device *rdev);
+void r600_uvd_stop(struct radeon_device *rdev);
 int r600_uvd_ib_test(struct radeon_device *rdev, struct radeon_ring *ring);
 void r600_uvd_fence_emit(struct radeon_device *rdev,
 			 struct radeon_fence *fence);
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1983,6 +1983,7 @@ int rv770_resume(struct radeon_device *r
 int rv770_suspend(struct radeon_device *rdev)
 {
 	r600_audio_fini(rdev);
+	r600_uvd_stop(rdev);
 	radeon_uvd_suspend(rdev);
 	r700_cp_stop(rdev);
 	r600_dma_stop(rdev);
@@ -2098,6 +2099,7 @@ void rv770_fini(struct radeon_device *rd
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
 	rv770_pcie_gart_fini(rdev);
+	r600_uvd_stop(rdev);
 	radeon_uvd_fini(rdev);
 	r600_vram_scratch_fini(rdev);
 	radeon_gem_fini(rdev);
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5473,7 +5473,7 @@ int si_suspend(struct radeon_device *rde
 	si_cp_enable(rdev, false);
 	cayman_dma_stop(rdev);
 	if (rdev->has_uvd) {
-		r600_uvd_rbc_stop(rdev);
+		r600_uvd_stop(rdev);
 		radeon_uvd_suspend(rdev);
 	}
 	si_irq_suspend(rdev);
@@ -5613,8 +5613,10 @@ void si_fini(struct radeon_device *rdev)
 	radeon_vm_manager_fini(rdev);
 	radeon_ib_pool_fini(rdev);
 	radeon_irq_kms_fini(rdev);
-	if (rdev->has_uvd)
+	if (rdev->has_uvd) {
+		r600_uvd_stop(rdev);
 		radeon_uvd_fini(rdev);
+	}
 	si_pcie_gart_fini(rdev);
 	r600_vram_scratch_fini(rdev);
 	radeon_gem_fini(rdev);

[ 56/60] drm/radeon: only save UVD bo when we have open handles

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian König <christian.koenig@amd.com>

commit 4ad9c1c774c2af152283f510062094e768876f55 upstream.

Otherwise just reinitialize from scratch on resume,
and so make it more likely to succeed.

v2: rebased for 3.10-stable tree

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon.h       |    2 -
 drivers/gpu/drm/radeon/radeon_fence.c |    2 -
 drivers/gpu/drm/radeon/radeon_uvd.c   |   46 ++++++++++++++++++++++++----------
 drivers/gpu/drm/radeon/rv770.c        |    2 -
 4 files changed, 36 insertions(+), 16 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1146,7 +1146,6 @@ struct radeon_uvd {
 	void			*cpu_addr;
 	uint64_t		gpu_addr;
 	void			*saved_bo;
-	unsigned		fw_size;
 	atomic_t		handles[RADEON_MAX_UVD_HANDLES];
 	struct drm_file		*filp[RADEON_MAX_UVD_HANDLES];
 	struct delayed_work	idle_work;
@@ -1686,6 +1685,7 @@ struct radeon_device {
 	const struct firmware *rlc_fw;	/* r6/700 RLC firmware */
 	const struct firmware *mc_fw;	/* NI MC firmware */
 	const struct firmware *ce_fw;	/* SI CE firmware */
+	const struct firmware *uvd_fw;	/* UVD firmware */
 	struct r600_blit r600_blit;
 	struct r600_vram_scratch vram_scratch;
 	int msi_enabled; /* msi enabled */
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -782,7 +782,7 @@ int radeon_fence_driver_start_ring(struc
 
 		} else {
 			/* put fence directly behind firmware */
-			index = ALIGN(rdev->uvd.fw_size, 8);
+			index = ALIGN(rdev->uvd_fw->size, 8);
 			rdev->fence_drv[ring].cpu_addr = rdev->uvd.cpu_addr + index;
 			rdev->fence_drv[ring].gpu_addr = rdev->uvd.gpu_addr + index;
 		}
--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -55,7 +55,6 @@ static void radeon_uvd_idle_work_handler
 int radeon_uvd_init(struct radeon_device *rdev)
 {
 	struct platform_device *pdev;
-	const struct firmware *fw;
 	unsigned long bo_size;
 	const char *fw_name;
 	int i, r;
@@ -105,7 +104,7 @@ int radeon_uvd_init(struct radeon_device
 		return -EINVAL;
 	}
 
-	r = request_firmware(&fw, fw_name, &pdev->dev);
+	r = request_firmware(&rdev->uvd_fw, fw_name, &pdev->dev);
 	if (r) {
 		dev_err(rdev->dev, "radeon_uvd: Can't load firmware \"%s\"\n",
 			fw_name);
@@ -115,7 +114,7 @@ int radeon_uvd_init(struct radeon_device
 
 	platform_device_unregister(pdev);
 
-	bo_size = RADEON_GPU_PAGE_ALIGN(fw->size + 8) +
+	bo_size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 8) +
 		  RADEON_UVD_STACK_SIZE + RADEON_UVD_HEAP_SIZE;
 	r = radeon_bo_create(rdev, bo_size, PAGE_SIZE, true,
 			     RADEON_GEM_DOMAIN_VRAM, NULL, &rdev->uvd.vcpu_bo);
@@ -148,12 +147,6 @@ int radeon_uvd_init(struct radeon_device
 
 	radeon_bo_unreserve(rdev->uvd.vcpu_bo);
 
-	rdev->uvd.fw_size = fw->size;
-	memset(rdev->uvd.cpu_addr, 0, bo_size);
-	memcpy(rdev->uvd.cpu_addr, fw->data, fw->size);
-
-	release_firmware(fw);
-
 	for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
 		atomic_set(&rdev->uvd.handles[i], 0);
 		rdev->uvd.filp[i] = NULL;
@@ -177,33 +170,60 @@ void radeon_uvd_fini(struct radeon_devic
 	}
 
 	radeon_bo_unref(&rdev->uvd.vcpu_bo);
+
+	release_firmware(rdev->uvd_fw);
 }
 
 int radeon_uvd_suspend(struct radeon_device *rdev)
 {
 	unsigned size;
+	void *ptr;
+	int i;
 
 	if (rdev->uvd.vcpu_bo == NULL)
 		return 0;
 
+	for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i)
+		if (atomic_read(&rdev->uvd.handles[i]))
+			break;
+
+	if (i == RADEON_MAX_UVD_HANDLES)
+		return 0;
+
 	size = radeon_bo_size(rdev->uvd.vcpu_bo);
+	size -= rdev->uvd_fw->size;
+
+	ptr = rdev->uvd.cpu_addr;
+	ptr += rdev->uvd_fw->size;
+
 	rdev->uvd.saved_bo = kmalloc(size, GFP_KERNEL);
-	memcpy(rdev->uvd.saved_bo, rdev->uvd.cpu_addr, size);
+	memcpy(rdev->uvd.saved_bo, ptr, size);
 
 	return 0;
 }
 
 int radeon_uvd_resume(struct radeon_device *rdev)
 {
+	unsigned size;
+	void *ptr;
+
 	if (rdev->uvd.vcpu_bo == NULL)
 		return -EINVAL;
 
+	memcpy(rdev->uvd.cpu_addr, rdev->uvd_fw->data, rdev->uvd_fw->size);
+
+	size = radeon_bo_size(rdev->uvd.vcpu_bo);
+	size -= rdev->uvd_fw->size;
+
+	ptr = rdev->uvd.cpu_addr;
+	ptr += rdev->uvd_fw->size;
+
 	if (rdev->uvd.saved_bo != NULL) {
-		unsigned size = radeon_bo_size(rdev->uvd.vcpu_bo);
-		memcpy(rdev->uvd.cpu_addr, rdev->uvd.saved_bo, size);
+		memcpy(ptr, rdev->uvd.saved_bo, size);
 		kfree(rdev->uvd.saved_bo);
 		rdev->uvd.saved_bo = NULL;
-	}
+	} else
+		memset(ptr, 0, size);
 
 	return 0;
 }
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -813,7 +813,7 @@ int rv770_uvd_resume(struct radeon_devic
 
 	/* programm the VCPU memory controller bits 0-27 */
 	addr = rdev->uvd.gpu_addr >> 3;
-	size = RADEON_GPU_PAGE_ALIGN(rdev->uvd.fw_size + 4) >> 3;
+	size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 4) >> 3;
 	WREG32(UVD_VCPU_CACHE_OFFSET0, addr);
 	WREG32(UVD_VCPU_CACHE_SIZE0, size);
 

[ 57/60] drm/radeon: always program the MC on startup

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 6fab3febf6d949b0a12b1e4e73db38e4a177a79e upstream.

For r6xx+ asics.  This mirrors the behavior of pre-r6xx
asics.  We need to program the MC even if something
else in startup() fails.  Failure to do so results in
an unusable GPU.

Based on a fix from: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ rebased for 3.10 and dropped the drivers/gpu/drm/radeon/cik.c
  bit as it's 3.11 specific code / tmb ]
Signed-off-by: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/evergreen.c |    3 ++-
 drivers/gpu/drm/radeon/ni.c        |    3 ++-
 drivers/gpu/drm/radeon/r600.c      |    3 ++-
 drivers/gpu/drm/radeon/rv770.c     |    3 ++-
 drivers/gpu/drm/radeon/si.c        |    3 ++-
 5 files changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -4681,6 +4681,8 @@ static int evergreen_startup(struct rade
 	/* enable pcie gen2 link */
 	evergreen_pcie_gen2_enable(rdev);
 
+	evergreen_mc_program(rdev);
+
 	if (ASIC_IS_DCE5(rdev)) {
 		if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) {
 			r = ni_init_microcode(rdev);
@@ -4708,7 +4710,6 @@ static int evergreen_startup(struct rade
 	if (r)
 		return r;
 
-	evergreen_mc_program(rdev);
 	if (rdev->flags & RADEON_IS_AGP) {
 		evergreen_agp_enable(rdev);
 	} else {
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1929,6 +1929,8 @@ static int cayman_startup(struct radeon_
 	/* enable pcie gen2 link */
 	evergreen_pcie_gen2_enable(rdev);
 
+	evergreen_mc_program(rdev);
+
 	if (rdev->flags & RADEON_IS_IGP) {
 		if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
 			r = ni_init_microcode(rdev);
@@ -1957,7 +1959,6 @@ static int cayman_startup(struct radeon_
 	if (r)
 		return r;
 
-	evergreen_mc_program(rdev);
 	r = cayman_pcie_gart_enable(rdev);
 	if (r)
 		return r;
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3224,6 +3224,8 @@ static int r600_startup(struct radeon_de
 	/* enable pcie gen2 link */
 	r600_pcie_gen2_enable(rdev);
 
+	r600_mc_program(rdev);
+
 	if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
 		r = r600_init_microcode(rdev);
 		if (r) {
@@ -3236,7 +3238,6 @@ static int r600_startup(struct radeon_de
 	if (r)
 		return r;
 
-	r600_mc_program(rdev);
 	if (rdev->flags & RADEON_IS_AGP) {
 		r600_agp_enable(rdev);
 	} else {
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1829,6 +1829,8 @@ static int rv770_startup(struct radeon_d
 	/* enable pcie gen2 link */
 	rv770_pcie_gen2_enable(rdev);
 
+	rv770_mc_program(rdev);
+
 	if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
 		r = r600_init_microcode(rdev);
 		if (r) {
@@ -1841,7 +1843,6 @@ static int rv770_startup(struct radeon_d
 	if (r)
 		return r;
 
-	rv770_mc_program(rdev);
 	if (rdev->flags & RADEON_IS_AGP) {
 		rv770_agp_enable(rdev);
 	} else {
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5270,6 +5270,8 @@ static int si_startup(struct radeon_devi
 	struct radeon_ring *ring;
 	int r;
 
+	si_mc_program(rdev);
+
 	if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
 	    !rdev->rlc_fw || !rdev->mc_fw) {
 		r = si_init_microcode(rdev);
@@ -5289,7 +5291,6 @@ static int si_startup(struct radeon_devi
 	if (r)
 		return r;
 
-	si_mc_program(rdev);
 	r = si_pcie_gart_enable(rdev);
 	if (r)
 		return r;

[ 58/60] SCSI: nsp32: use mdelay instead of large udelay constants

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit b497ceb964a80ebada3b9b3cea4261409039e25a upstream.

ARM cannot handle udelay for more than 2 miliseconds, so we
should use mdelay instead for those.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: GOTO Masanori <gotom@debian.or.jp>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/nsp32.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_
 	 * reset SCSI bus
 	 */
 	nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
-	udelay(RESET_HOLD_TIME);
+	mdelay(RESET_HOLD_TIME / 1000);
 	nsp32_write1(base, SCSI_BUS_CONTROL, 0);
 	for(i = 0; i < 5; i++) {
 		intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */

[ 59/60] mtd: omap2: allow bulding as a module

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 930d800bded771b26d9944c47810829130ff7c8c upstream.

The omap2 nand device driver calls into the the elm code, which can
be a loadable module, and in that case it cannot be built-in itself.
I can see no reason why the omap2 driver cannot also be a module,
so let's make the option "tristate" in Kconfig to fix this allmodconfig
build error:

ERROR: "elm_config" [drivers/mtd/nand/omap2.ko] undefined!
ERROR: "elm_decode_bch_error_page" [drivers/mtd/nand/omap2.ko] undefined!

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Afzal Mohammed <afzal@ti.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -95,7 +95,7 @@ config MTD_NAND_OMAP2
 
 config MTD_NAND_OMAP_BCH
 	depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
-	bool "Enable support for hardware BCH error correction"
+	tristate "Enable support for hardware BCH error correction"
 	default n
 	select BCH
 	select BCH_CONST_PARAMS

[ 60/60] MIPS: Expose missing pci_io{map,unmap} declarations

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Markos Chandras <markos.chandras@imgtec.com>

commit 78857614104a26cdada4c53eea104752042bf5a1 upstream.

The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move
it to the CONFIG_MIPS symbol so it's always selected for MIPS.
This fixes the missing pci_iomap declaration for MIPS.
Moreover, the pci_iounmap function was not defined in the
io.h header file if the CONFIG_PCI symbol is not set,
but it should since MIPS is not using CONFIG_GENERIC_IOMAP.

This fixes the following problem on a allyesconfig:

drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of
function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of
function 'pci_iounmap' [-Werror=implicit-function-declaration]

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5478/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/Kconfig          |    2 +-
 arch/mips/include/asm/io.h |    5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -27,6 +27,7 @@ config MIPS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select IRQ_FORCED_THREADING
@@ -2412,7 +2413,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
 	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -170,6 +170,11 @@ static inline void * isa_bus_to_virt(uns
 extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
 extern void __iounmap(const volatile void __iomem *addr);
 
+#ifndef CONFIG_PCI
+struct pci_dev;
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+#endif
+
 static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 	unsigned long flags)
 {

Re: [ 00/60] 3.10.7-stable review

[Guenter Roeck]

On 08/12/2013 11:33 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.10.7 release.
> There are 60 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Aug 15 06:33:14 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.10.7-rc1.gz
> and the diffstat can be found below.
>
Cross build results:
	Total builds: 69 Total build errors: 0

qemu:
	mips, ppc, x86, x86_64 pass (boot to login prompt)
	arm: fail (known problem, see https://lkml.org/lkml/2013/8/11/41)

Details:
	http://server.roeck-us.net:8010/waterfall

Builds failing on 3.10.6 (mips:allmodconfig and arm:allmodconfig) now pass,
so results are better than with the previous release.

Guenter

Re: [ 00/60] 3.10.7-stable review

[Shuah Khan]

On 08/13/2013 08:02 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.10.7 release.
> There are 60 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Aug 15 06:33:14 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.10.7-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Patches applied cleanly to 3.0.90, 3.4.57 and 3.10.6

Compiled and booted on the following systems:

Samsung Series 9 900X4C Intel Corei5:
     (3.4.58-rc1, 3.10.7-rc1)
HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics:
     (3.0.91-rc1, 3.4.58-rc1, and 3.10.7-rc1)

dmesgs for all releases look good. No regressions compared to the 
previous dmesgs for each of these releases. dmesg emerg, crit, alert, 
err are clean. No regressions in warn.

Cross-compile testing:
HP Compaq dc7700 SFF desktop: x86-64 Intel Core-i2:
     (3.0.91-rc1, 3.4.58-rc1, and 3.10.7-rc1)

Cross-compile tests results:

alpha: defconfig passed on all
arm: defconfig passed on all
arm64: not applicable to 3.0.y, 3.4.y. defconfig passed on 3.10.y
blackfin: defconfig passed on all
c6x: not applicable to 3.0.y, defconfig passed on 3.4.y, and 3.10.y
mips: defconfig passed on all
mipsel: defconfig passed on all
powerpc: wii_defconfig passed on all
sh: defconfig passed on all
sparc: defconfig passed on all
tile: tilegx_defconfig passed on all

-- Shuah

Shuah Khan, Linux Kernel Developer - Open Source Group Samsung Research 
America (Silicon Valley) shuah.kh@samsung.com | (970) 672-0658

Re: [ 00/60] 3.10.7-stable review

[Greg Kroah-Hartman]

On Tue, Aug 13, 2013 at 04:57:09AM -0700, Guenter Roeck wrote:
> On 08/12/2013 11:33 PM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 3.10.7 release.
> >There are 60 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Thu Aug 15 06:33:14 UTC 2013.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> >	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.10.7-rc1.gz
> >and the diffstat can be found below.
> >
> Cross build results:
> 	Total builds: 69 Total build errors: 0

Nice, finally :)

> qemu:
> 	mips, ppc, x86, x86_64 pass (boot to login prompt)
> 	arm: fail (known problem, see https://lkml.org/lkml/2013/8/11/41)
> 
> Details:
> 	http://server.roeck-us.net:8010/waterfall
> 
> Builds failing on 3.10.6 (mips:allmodconfig and arm:allmodconfig) now pass,
> so results are better than with the previous release.

That's great to see, thanks for letting me know.

greg k-h

Re: [ 00/60] 3.10.7-stable review

[Greg Kroah-Hartman]

On Tue, Aug 13, 2013 at 05:18:07PM +0000, Shuah Khan wrote:
> On 08/13/2013 08:02 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.10.7 release.
> > There are 60 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Aug 15 06:33:14 UTC 2013.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.10.7-rc1.gz
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
> 
> Patches applied cleanly to 3.0.90, 3.4.57 and 3.10.6
> 
> Compiled and booted on the following systems:
> 
> Samsung Series 9 900X4C Intel Corei5:
>      (3.4.58-rc1, 3.10.7-rc1)
> HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics:
>      (3.0.91-rc1, 3.4.58-rc1, and 3.10.7-rc1)
> 
> dmesgs for all releases look good. No regressions compared to the 
> previous dmesgs for each of these releases. dmesg emerg, crit, alert, 
> err are clean. No regressions in warn.

Thanks for testing these and letting us know.

greg k-h