[PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[HATAYAMA Daisuke]

This is the patch series to address the issue that kdump 2nd kernel
now fails to wake up multiple CPUs.

This is based on 3.11-rc7.

I tested this patch series on x86. I used 2 cpus by specifying
nr_cpus=2 for the 2nd kernel. I checked both ACPI MADT and MP table
case; the former is default on my system and for the latter I did
acpi=off. I crashed the system both on BSP and AP by taskset -c {0,1}
sh -c "echo c > /proc/sysrq-trigger".

---

HATAYAMA Daisuke (2):
      x86, apic: Add boot_cpu_is_bsp() to check if boot cpu is BSP
      x86, apic: Disable BSP if boot cpu is AP


 arch/x86/include/asm/mpspec.h |    5 ++++-
 arch/x86/kernel/acpi/boot.c   |   11 ++++++++++-
 arch/x86/kernel/apic/apic.c   |   32 +++++++++++++++++++++++++++++++-
 arch/x86/kernel/devicetree.c  |    1 +
 arch/x86/kernel/mpparse.c     |   15 +++++++++++++--
 arch/x86/kernel/setup.c       |    2 ++
 arch/x86/platform/sfi/sfi.c   |    2 +-
 7 files changed, 62 insertions(+), 6 deletions(-)

-- 
Thanks.
HATAYAMA, Daisuke

[PATCH 1/2] x86, apic: Add boot_cpu_is_bsp() to check if boot cpu is BSP

[HATAYAMA Daisuke]

Kexec can enter the kdump 2nd kernel on AP if crash happens on AP. To
check if boot cpu is BSP, introduce a helper function
boot_cpu_is_bsp().

Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
---
 arch/x86/include/asm/mpspec.h |    3 +++
 arch/x86/kernel/apic/apic.c   |   14 ++++++++++++++
 arch/x86/kernel/setup.c       |    2 ++
 3 files changed, 19 insertions(+)

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 626cf70..a8a4338 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -47,10 +47,13 @@ extern int mp_bus_id_to_type[MAX_MP_BUSSES];
 extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 
 extern unsigned int boot_cpu_physical_apicid;
+extern bool boot_cpu_is_bsp;
 extern unsigned int max_physical_apicid;
 extern int mpc_default_type;
 extern unsigned long mp_lapic_addr;
 
+extern void boot_cpu_is_bsp_init(void);
+
 #ifdef CONFIG_X86_LOCAL_APIC
 extern int smp_found_config;
 #else
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index eca89c5..66cab35 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -64,6 +64,12 @@ unsigned disabled_cpus;
 unsigned int boot_cpu_physical_apicid = -1U;
 
 /*
+ * Indicates whether the processor that is doing the boot up, is BSP
+ * processor or not.
+ */
+bool boot_cpu_is_bsp;
+
+/*
  * The highest APIC ID seen during enumeration.
  */
 unsigned int max_physical_apicid;
@@ -2589,3 +2595,11 @@ static int __init lapic_insert_resource(void)
  * that is using request_resource
  */
 late_initcall(lapic_insert_resource);
+
+void boot_cpu_is_bsp_init(void)
+{
+	u32 l, h;
+
+	rdmsr(MSR_IA32_APICBASE, l, h);
+	boot_cpu_is_bsp = (l & MSR_IA32_APICBASE_BSP) ? true : false;
+}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f8ec578..f47f716 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1169,6 +1169,8 @@ void __init setup_arch(char **cmdline_p)
 
 	early_quirks();
 
+	boot_cpu_is_bsp_init();
+
 	/*
 	 * Read APIC and some other early information from ACPI tables.
 	 */

[PATCH 2/2] x86, apic: Disable BSP if boot cpu is AP

[HATAYAMA Daisuke]

Currently, on x86 architecture, if crash happens on AP in the kdump
1st kernel, the 2nd kernel fails to wake up multiple CPUs. The typical
behaviour we actually see is immediate system reset or hang.

This comes from the hardware specification that the processor with BSP
flag is jumped at BIOS init code when receiving INIT; the behaviour we
then see depends on the init code.

This never happens if we use only one cpu in the 2nd kernel. So, we
have avoided the issue by the workaround that specifying maxcpus=1 or
nr_cpus=1 in kernel parameter of the 2nd kernel.

In order to address the issue, this patch disables BSP if boot cpu is
AP. Then, there's no longer the BSP. There's no longer possibility to
send INIT to the BSP.

Before this idea we discussed the following two ideas but we cannot
adopt them in each reasons:

  1. Switch CPU from AP to BSP via IPI NMI at crash in the 1st kernel

    This is done in the kdump crash path where logic is in
    inconsistent state. Any part of memory can be corrupted, including
    hardware-related table being accessed for example when paging is
    performed or interruption is performed.

  2. Unset BSP flag of the boot cpu in the 1st kernel

    Unsetting BSP flag can affect some real world firmware badly. For
    example, Ma verified that some HP systems fail to reboot under
    this configuration. See:
    http://lkml.indiana.edu/hypermail/linux/kernel/1308.1/03574.html

Due to the idea 1, we have to address the issue in the 2nd kernel on
AP. Then, it's impossible to know which CPU is BSP by rdmsr
instruction because the CPU is the one we are now trying to wake
up. From the same reason, it's also impossible to unset BSP flag of
the BSP by wrmsr instruction.

Next, due to the idea 2, BSP is halting in the 1st kernel while
keeping BSP flag set (or possibly could be running somewhere in
catastrophic state.) In generall, CPUs except for the boot cpu in the
2nd kernel -- the cpu under which crash happened --- can be thought of
as remaining in any inconsistent state in the 1st kernel. For APs,
it's possible to recover sane state by initiating INIT to them; see
3.7.3 Processor-specific INIT in MultiProcessor
specification. However, there's no way for BSP. Therefore, there's no
other way to disable BSP.

My motivation is to generate crash dump quickly on the system with
huge memory. We can assume such system also has a lot of N-cpus and
(N-1)-cpus are still available.

To identify which CPU is BSP, we lookup ACPI table or MP table. One
concern is that ACPI guidlines BIOS *should* list the BSP in the first
MADT LAPIC entry; not *must*. In this sense, this logic relis on BIOS
following ACPI's guideline. On the other hand, we don't need to worry
about this in MP table case because it has explit BSP flag.

To avoid any undesirable bahaviour caused by any broken BIOS that
doesn't conform to the guideline, it's enough to limit the number of
cpus to 1 by specifying maxcpu=1 or nr_cpus=1, as is currently done in
default kdump configuration. (But of course, it's problematic in
maxcpu=1 case if trying to wake up other cpus later in user space.)

SFI and devicetree doesn't provide BSP information, so there's no
functionality change in their codes, only assigning false for all the
entries, keeping interface uniform.

Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
---
 arch/x86/include/asm/mpspec.h |    2 +-
 arch/x86/kernel/acpi/boot.c   |   11 ++++++++++-
 arch/x86/kernel/apic/apic.c   |   18 +++++++++++++++++-
 arch/x86/kernel/devicetree.c  |    1 +
 arch/x86/kernel/mpparse.c     |   15 +++++++++++++--
 arch/x86/platform/sfi/sfi.c   |    2 +-
 6 files changed, 43 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index a8a4338..d96f409 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -97,7 +97,7 @@ static inline void early_reserve_e820_mpc_new(void) { }
 #define default_get_smp_config x86_init_uint_noop
 #endif
 
-void generic_processor_info(int apicid, int version);
+void generic_processor_info(int apicid, bool isbsp, int version);
 #ifdef CONFIG_ACPI
 extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
 extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 2627a81..78d95ec 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -198,6 +198,7 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 static void acpi_register_lapic(int id, u8 enabled)
 {
 	unsigned int ver = 0;
+	bool isbsp = false;
 
 	if (id >= (MAX_LOCAL_APIC-1)) {
 		printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
@@ -212,7 +213,15 @@ static void acpi_register_lapic(int id, u8 enabled)
 	if (boot_cpu_physical_apicid != -1U)
 		ver = apic_version[boot_cpu_physical_apicid];
 
-	generic_processor_info(id, ver);
+	/*
+	 * ACPI specification describes that platform firmware should
+	 * list the boot processor as the first LAPIC entry in the
+	 * MADT.
+	 */
+	if (!num_processors && !disabled_cpus)
+		isbsp = true;
+
+	generic_processor_info(id, isbsp, ver);
 }
 
 static int __init
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 66cab35..fd969d1 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2113,13 +2113,29 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
-void generic_processor_info(int apicid, int version)
+void generic_processor_info(int apicid, bool isbsp, int version)
 {
 	int cpu, max = nr_cpu_ids;
 	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
 				phys_cpu_present_map);
 
 	/*
+	 * If boot cpu is AP, we now don't have any way to initialize
+	 * BSP. To save memory consumed, we disable BSP this case and
+	 * use (N-1)-cpus.
+	 */
+	if (isbsp && !boot_cpu_is_bsp) {
+		int thiscpu = num_processors + disabled_cpus;
+
+		pr_warning("ACPI: The boot cpu is not BSP. "
+			   "The BSP Processor %d/0x%x ignored.\n",
+			   thiscpu, apicid);
+
+		disabled_cpus++;
+		return;
+	}
+
+	/*
 	 * If boot cpu has not been detected yet, then only allow upto
 	 * nr_cpu_ids - 1 processors and keep one slot free for boot cpu
 	 */
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 69eb2fa..fe4e39a 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -183,6 +183,7 @@ static void __init dtb_lapic_setup(void)
 	pic_mode = 1;
 	register_lapic_address(r.start);
 	generic_processor_info(boot_cpu_physical_apicid,
+			       false,
 			       GET_APIC_VERSION(apic_read(APIC_LVR)));
 #endif
 }
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index d2b5648..003b07fe 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -54,6 +54,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 {
 	int apicid;
 	char *bootup_cpu = "";
+	bool isbsp = false;
 
 	if (!(m->cpuflag & CPU_ENABLED)) {
 		disabled_cpus++;
@@ -64,11 +65,21 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 
 	if (m->cpuflag & CPU_BOOTPROCESSOR) {
 		bootup_cpu = " (Bootup-CPU)";
-		boot_cpu_physical_apicid = m->apicid;
+		/*
+		 * boot cpu cannot be BSP if any crash happens on AP
+		 * and kexec enters the 2nd kernel.
+		 *
+		 * Also, boot_cpu_physical_apicid can be initialized
+		 * before reaching here; for example, in
+		 * register_lapic_address().
+		 */
+		if (boot_cpu_is_bsp && boot_cpu_physical_apicid == -1U)
+			boot_cpu_physical_apicid = m->apicid;
+		isbsp = true;
 	}
 
 	printk(KERN_INFO "Processor #%d%s\n", m->apicid, bootup_cpu);
-	generic_processor_info(apicid, m->apicver);
+	generic_processor_info(apicid, isbsp, m->apicver);
 }
 
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index bcd1a70..4f111c7 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -45,7 +45,7 @@ static void __init mp_sfi_register_lapic(u8 id)
 
 	pr_info("registering lapic[%d]\n", id);
 
-	generic_processor_info(id, GET_APIC_VERSION(apic_read(APIC_LVR)));
+	generic_processor_info(id, false, GET_APIC_VERSION(apic_read(APIC_LVR)));
 }
 
 static int __init sfi_parse_cpus(struct sfi_table_header *table)

Re: [PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[H. Peter Anvin]

On 08/29/2013 02:27 AM, HATAYAMA Daisuke wrote:
> This is the patch series to address the issue that kdump 2nd kernel
> now fails to wake up multiple CPUs.

Please explain the "now" in the above sentence.  Is this a regression?
If so, what is its impact?  Is this something that needs to go into 3.11
as a post-rc7 change, which means it better be hyper-critical?

	-hpa

Re: [PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[Eric W. Biederman]

"H. Peter Anvin" <hpa@linux.intel.com> writes:

> On 08/29/2013 02:27 AM, HATAYAMA Daisuke wrote:
>> This is the patch series to address the issue that kdump 2nd kernel
>> now fails to wake up multiple CPUs.
>
> Please explain the "now" in the above sentence.  Is this a regression?
> If so, what is its fimpact?

This is not a regression.

>  Is this something that needs to go into 3.11
> as a post-rc7 change, which means it better be hyper-critical?

No.  This is something that does not need to go into 3.11.

This situation is people who run machines of unreasonable size really
would like to use multiple cpus when generating crash dumps.  A
practical problem with that desire is that sending a (startup? init? I
forget which) IPI to a processor with the BSP flag sent triggers that
processor to load code from 0xfffffff0 instead of the vector specified
in the IPI.  At which point the processor which jumped to 0xfffffff0 and
is running BIOS code does not call into the kernel so never comes up
which is unfortunate, and worse almost always triggers a soft reset by
writing hardware registers.

Which means the practical way to avoid this sort of thing is not to send
init/startup IPIs to processors with the BSP bit set.  Which MPtables
and ACPI tables should denote as the boot processor.

In a previous attack on this problem we explored if it was possible to
clear the BSP bit and be able to use all processors but that does not
work.  I think it was actually your suggestion that we just skip the
BSP.

Anyway this long simmering issue has raised it's head again and we have
iron-clad evidence that the only thing people can do is avoid the
problem so this is a patchset to allow people who wind up in a
situtation where they are not booting on the bootstrap processor to to
avoid problems, and use as many of their other processors as possible.

Which should make people with boxes of unusual size happy.

Eric

Re: [PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[HATAYAMA Daisuke]

(2013/08/29 22:54), H. Peter Anvin wrote:
> On 08/29/2013 02:27 AM, HATAYAMA Daisuke wrote:
>> This is the patch series to address the issue that kdump 2nd kernel
>> now fails to wake up multiple CPUs.
>
> Please explain the "now" in the above sentence.  Is this a regression?
> If so, what is its impact?  Is this something that needs to go into 3.11
> as a post-rc7 change, which means it better be hyper-critical?
>
> 	-hpa
>
>

This is not a regression just as Eric explains.

There is also my explanation in the description of the 2nd patch. I should have described so here explicitly.

-- 
Thanks.
HATAYAMA, Daisuke

Re: [PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[Vivek Goyal]

On Thu, Aug 29, 2013 at 04:37:44PM -0700, Eric W. Biederman wrote:

[..]
> This situation is people who run machines of unreasonable size really
> would like to use multiple cpus when generating crash dumps.

Yes. Now kdump is in a phase where people are doing scalability work. And
one of the problems is that on mutli tera byte machines, filtering is
taking long time. With-in filtering it is especially the compression which
takes the longest (hatayama and cliff wickman have done some study here).

So Idea seems to be that bring up more cpus in the second kernel and try
to parallelize compression work and try to save dump time of multi tera
byte machines.

Thanks
Vivek

Re: [PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[H. Peter Anvin]

On 08/29/2013 04:51 PM, HATAYAMA Daisuke wrote:
> 
> This is not a regression just as Eric explains.
> 
> There is also my explanation in the description of the 2nd patch. I
> should have described so here explicitly.
> 

OK.  We're probably days away from a merge window, so I would like to
put this in the queue for 3.13.

	-hpa

Re: [PATCH 2/2] x86, apic: Disable BSP if boot cpu is AP

[Borislav Petkov]

On Thu, Aug 29, 2013 at 06:28:04PM +0900, HATAYAMA Daisuke wrote:
> diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
> index 66cab35..fd969d1 100644
> --- a/arch/x86/kernel/apic/apic.c
> +++ b/arch/x86/kernel/apic/apic.c
> @@ -2113,13 +2113,29 @@ void disconnect_bsp_APIC(int virt_wire_setup)
>  	apic_write(APIC_LVT1, value);
>  }
>  
> -void generic_processor_info(int apicid, int version)
> +void generic_processor_info(int apicid, bool isbsp, int version)
>  {
>  	int cpu, max = nr_cpu_ids;
>  	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
>  				phys_cpu_present_map);
>  
>  	/*
> +	 * If boot cpu is AP, we now don't have any way to initialize
> +	 * BSP. To save memory consumed, we disable BSP this case and

I don't think we disable the BSP just so that we save memory and rather
because we hang in the kdump kernel otherwise, right?

> +	 * use (N-1)-cpus.
> +	 */
> +	if (isbsp && !boot_cpu_is_bsp) {

This variable naming looks confusing, IMHO. It would probably be more
understandable if 'isbsp' was called 'boot_cpu' to denote that this is
the CPU we're booting on currently. The comment above it then explains
that it is an AP and it might also refer to the issue why we're doing
that.

> +		int thiscpu = num_processors + disabled_cpus;
> +
> +		pr_warning("ACPI: The boot cpu is not BSP. "
> +			   "The BSP Processor %d/0x%x ignored.\n",
> +			   thiscpu, apicid);

Visible comment, so needs a bit of correcting:

	"ACPI: We're not booting on the BSP; BSP %d/0x%x ignored."

> +
> +		disabled_cpus++;
> +		return;
> +	}
> +
> +	/*
>  	 * If boot cpu has not been detected yet, then only allow upto
>  	 * nr_cpu_ids - 1 processors and keep one slot free for boot cpu
>  	 */

Thanks.

-- 
Regards/Gruss,
Boris.

Re: [PATCH 2/2] x86, apic: Disable BSP if boot cpu is AP

[HATAYAMA Daisuke]

(2013/08/31 14:22), Borislav Petkov wrote:
> On Thu, Aug 29, 2013 at 06:28:04PM +0900, HATAYAMA Daisuke wrote:
>> diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
>> index 66cab35..fd969d1 100644
>> --- a/arch/x86/kernel/apic/apic.c
>> +++ b/arch/x86/kernel/apic/apic.c
>> @@ -2113,13 +2113,29 @@ void disconnect_bsp_APIC(int virt_wire_setup)
>>   	apic_write(APIC_LVT1, value);
>>   }
>>
>> -void generic_processor_info(int apicid, int version)
>> +void generic_processor_info(int apicid, bool isbsp, int version)
>>   {
>>   	int cpu, max = nr_cpu_ids;
>>   	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
>>   				phys_cpu_present_map);
>>
>>   	/*
>> +	 * If boot cpu is AP, we now don't have any way to initialize
>> +	 * BSP. To save memory consumed, we disable BSP this case and
>
> I don't think we disable the BSP just so that we save memory and rather
> because we hang in the kdump kernel otherwise, right?
>

Thanks for your reviewing.

Yes, primary reason of disabling BSP is to avoid hang/reset in the kdump
2nd kernel. Saving memory is the secondary merit compared with
the user-space workaround by specifying nr_cpus=1 or maxcpus=1 and
waking up APs later except for the BSP. I will not write this in the
next version.

>> +	 * use (N-1)-cpus.
>> +	 */
>> +	if (isbsp && !boot_cpu_is_bsp) {
>
> This variable naming looks confusing, IMHO. It would probably be more
> understandable if 'isbsp' was called 'boot_cpu' to denote that this is
> the CPU we're booting on currently. The comment above it then explains
> that it is an AP and it might also refer to the issue why we're doing
> that.
>

As you suggest, boot_cpu seems more understandable also to me. BTW, please
notice that it doesn't denote that the CPU we're booting on currently,
but that the CPU with BSP flag set.

In general, current code uses many terms to denote the cpu that is run
at kernel boot-up processing such as boot cpu, bsp, cpu0 and possibly others
since in usual situation, boot cpu is always BSP and assigned to cpu0.
But it is not the case in case of kexec. I'm using the word bsp purposely
in the isbsp to mean the CPU with BSP flag set.

So I think it's better to use bsp_cpu here to denote the CPU with BSP flag set.

For the comment, how about the following one?

         /*
          * In this case, boot cpu is AP. This can happen on
          * kexec/kdump. Consider the case that crash happens on some
          * AP and enters kdump 2nd kernel with the AP.
          *
          * Then, there's issue that if we send INIT to BSP, due to x86
          * hardware specification, it is forced to jump at BIOS init
          * code and system hangs or resets immediately.
          *
          * To avoid the issue, we disable BSP. Then, there's no longer
          * possbility to send INIT to BSP.
          */

>> +		int thiscpu = num_processors + disabled_cpus;
>> +
>> +		pr_warning("ACPI: The boot cpu is not BSP. "
>> +			   "The BSP Processor %d/0x%x ignored.\n",
>> +			   thiscpu, apicid);
>
> Visible comment, so needs a bit of correcting:
>
> 	"ACPI: We're not booting on the BSP; BSP %d/0x%x ignored."
>

Yes, I'll use this message in the next patch.

>> +
>> +		disabled_cpus++;
>> +		return;
>> +	}
>> +
>> +	/*
>>   	 * If boot cpu has not been detected yet, then only allow upto
>>   	 * nr_cpu_ids - 1 processors and keep one slot free for boot cpu
>>   	 */
>
> Thanks.
>


-- 
Thanks.
HATAYAMA, Daisuke

Re: [PATCH 2/2] x86, apic: Disable BSP if boot cpu is AP

[Borislav Petkov]

On Mon, Sep 02, 2013 at 11:32:59AM +0900, HATAYAMA Daisuke wrote:
> As you suggest, boot_cpu seems more understandable also to me. BTW,
> please notice that it doesn't denote that the CPU we're booting on
> currently, but that the CPU with BSP flag set.

Hmm, by "BSP flag set" you mean it is the first LAPIC entry in the MADT,
correct? At least this is the case when you set isbsp to true. Because,
there's also the BSC flag in APIC_BAR (MSR 0x1b) which denotes the
bootstrapping core on node 0.

> In general, current code uses many terms to denote the cpu that is run
> at kernel boot-up processing such as boot cpu, bsp, cpu0 and possibly
> others since in usual situation, boot cpu is always BSP and assigned
> to cpu0. But it is not the case in case of kexec. I'm using the word
> bsp purposely in the isbsp to mean the CPU with BSP flag set.
>
> So I think it's better to use bsp_cpu here to denote the CPU with BSP
> flag set.

Right.

> For the comment, how about the following one?
> 
>         /*
>          * In this case, boot cpu is AP. This can happen on
>          * kexec/kdump. Consider the case that crash happens on some
>          * AP and enters kdump 2nd kernel with the AP.
>          *
>          * Then, there's issue that if we send INIT to BSP, due to x86
>          * hardware specification, it is forced to jump at BIOS init
>          * code and system hangs or resets immediately.
>          *
>          * To avoid the issue, we disable BSP. Then, there's no longer
>          * possbility to send INIT to BSP.
>          */

Yes, much better. Especially when looking down the road and people have
forgotten what the whole fuss was about, a nice detailed comment is
priceless.

Thanks.

-- 
Regards/Gruss,
Boris.

Re: [PATCH 2/2] x86, apic: Disable BSP if boot cpu is AP

[HATAYAMA Daisuke]

(2013/09/02 16:13), Borislav Petkov wrote:
> On Mon, Sep 02, 2013 at 11:32:59AM +0900, HATAYAMA Daisuke wrote:
>> As you suggest, boot_cpu seems more understandable also to me. BTW,
>> please notice that it doesn't denote that the CPU we're booting on
>> currently, but that the CPU with BSP flag set.
>
> Hmm, by "BSP flag set" you mean it is the first LAPIC entry in the MADT,
> correct? At least this is the case when you set isbsp to true. Because,
> there's also the BSC flag in APIC_BAR (MSR 0x1b) which denotes the
> bootstrapping core on node 0.
>

The reason why I don't lookup BSP flag in MSR is that it's impossible.
To read MSR of some CPU, we need to use rdmsr instruction on the CPU.
However, in case of this issue, the BSP is halting or running in
the kdump 1st kernel.

A whole explanation is written in the patch description.

-- 
Thanks.
HATAYAMA, Daisuke

Re: [PATCH 2/2] x86, apic: Disable BSP if boot cpu is AP

[Borislav Petkov]

On Mon, Sep 02, 2013 at 06:42:44PM +0900, HATAYAMA Daisuke wrote:
> The reason why I don't lookup BSP flag in MSR is that it's impossible.
> To read MSR of some CPU, we need to use rdmsr instruction on the CPU.
> However, in case of this issue, the BSP is halting or running in
> the kdump 1st kernel.

Yes, and on the AP, that flag would be cleared which makes it not a BSP.

> A whole explanation is written in the patch description.

Those tend to get lost in git history when a bunch of whitespace jerk
offs appear ontop. So a nicely written comment in the code could be very
helpful.

Thanks.

-- 
Regards/Gruss,
Boris.

Re: [PATCH 2/2] x86, apic: Disable BSP if boot cpu is AP

[HATAYAMA Daisuke]

(2013/09/04 15:12), Borislav Petkov wrote:
> On Mon, Sep 02, 2013 at 06:42:44PM +0900, HATAYAMA Daisuke wrote:
>> The reason why I don't lookup BSP flag in MSR is that it's impossible.
>> To read MSR of some CPU, we need to use rdmsr instruction on the CPU.
>> However, in case of this issue, the BSP is halting or running in
>> the kdump 1st kernel.
>
> Yes, and on the AP, that flag would be cleared which makes it not a BSP.
>
>> A whole explanation is written in the patch description.
>
> Those tend to get lost in git history when a bunch of whitespace jerk
> offs appear ontop. So a nicely written comment in the code could be very
> helpful.
>
> Thanks.
>

Yes, that's the point this patch series misses. I'll describe the explanation
in Documentation/kexec/kexec.txt and point it in the comment of boot-up code.

-- 
Thanks.
HATAYAMA, Daisuke

Re: [PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[Vivek Goyal]

On Fri, Aug 30, 2013 at 08:43:56AM -0700, H. Peter Anvin wrote:
> On 08/29/2013 04:51 PM, HATAYAMA Daisuke wrote:
> > 
> > This is not a regression just as Eric explains.
> > 
> > There is also my explanation in the description of the 2nd patch. I
> > should have described so here explicitly.
> > 
> 
> OK.  We're probably days away from a merge window, so I would like to
> put this in the queue for 3.13.

Hi hpa,

Have you queued up these patches for 3.13?

Thanks
Vivek

[tip:x86/bsp-hotplug] x86, apic: Add boot_cpu_is_bsp() to check if boot cpu is BSP

[tip-bot for HATAYAMA Daisuke]

Commit-ID:  68c3467bb95a9e99f46d04cb96f60c04bb997ac8
Gitweb:     http://git.kernel.org/tip/68c3467bb95a9e99f46d04cb96f60c04bb997ac8
Author:     HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
AuthorDate: Thu, 29 Aug 2013 18:27:58 +0900
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 9 Oct 2013 15:41:10 -0700

x86, apic: Add boot_cpu_is_bsp() to check if boot cpu is BSP

Kexec can enter the kdump 2nd kernel on AP if crash happens on AP. To
check if boot cpu is BSP, introduce a helper function
boot_cpu_is_bsp().

Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20130829092758.5476.90694.stgit@localhost6.localdomain6
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/mpspec.h |  3 +++
 arch/x86/kernel/apic/apic.c   | 14 ++++++++++++++
 arch/x86/kernel/setup.c       |  2 ++
 3 files changed, 19 insertions(+)

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 626cf70..a8a4338 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -47,10 +47,13 @@ extern int mp_bus_id_to_type[MAX_MP_BUSSES];
 extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 
 extern unsigned int boot_cpu_physical_apicid;
+extern bool boot_cpu_is_bsp;
 extern unsigned int max_physical_apicid;
 extern int mpc_default_type;
 extern unsigned long mp_lapic_addr;
 
+extern void boot_cpu_is_bsp_init(void);
+
 #ifdef CONFIG_X86_LOCAL_APIC
 extern int smp_found_config;
 #else
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a7eb82d..488709d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -64,6 +64,12 @@ unsigned disabled_cpus;
 unsigned int boot_cpu_physical_apicid = -1U;
 
 /*
+ * Indicates whether the processor that is doing the boot up, is BSP
+ * processor or not.
+ */
+bool boot_cpu_is_bsp;
+
+/*
  * The highest APIC ID seen during enumeration.
  */
 unsigned int max_physical_apicid;
@@ -2589,3 +2595,11 @@ static int __init lapic_insert_resource(void)
  * that is using request_resource
  */
 late_initcall(lapic_insert_resource);
+
+void boot_cpu_is_bsp_init(void)
+{
+	u32 l, h;
+
+	rdmsr(MSR_IA32_APICBASE, l, h);
+	boot_cpu_is_bsp = (l & MSR_IA32_APICBASE_BSP) ? true : false;
+}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f0de629..a30bc06 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1166,6 +1166,8 @@ void __init setup_arch(char **cmdline_p)
 
 	early_quirks();
 
+	boot_cpu_is_bsp_init();
+
 	/*
 	 * Read APIC and some other early information from ACPI tables.
 	 */

[tip:x86/bsp-hotplug] x86, apic: Disable BSP if boot cpu is AP

[tip-bot for HATAYAMA Daisuke]

Commit-ID:  1d79e607332d67d9132c176d99b5e7fabe1b6b7f
Gitweb:     http://git.kernel.org/tip/1d79e607332d67d9132c176d99b5e7fabe1b6b7f
Author:     HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
AuthorDate: Thu, 29 Aug 2013 18:28:04 +0900
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 9 Oct 2013 15:41:11 -0700

x86, apic: Disable BSP if boot cpu is AP

Currently, on x86 architecture, if crash happens on AP in the kdump
1st kernel, the 2nd kernel fails to wake up multiple CPUs. The typical
behaviour we actually see is immediate system reset or hang.

This comes from the hardware specification that the processor with BSP
flag is jumped at BIOS init code when receiving INIT; the behaviour we
then see depends on the init code.

This never happens if we use only one cpu in the 2nd kernel. So, we
have avoided the issue by the workaround that specifying maxcpus=1 or
nr_cpus=1 in kernel parameter of the 2nd kernel.

In order to address the issue, this patch disables BSP if boot cpu is
an AP, and thus we don't try to wake up the BSP by sending INIT.

Before this idea we discussed the following two ideas but we cannot
adopt them in each reasons:

  1. Switch CPU from AP to BSP via IPI NMI at crash in the 1st kernel

    This is done in the kdump crash path where logic is in
    inconsistent state. Any part of memory can be corrupted, including
    hardware-related table being accessed for example when paging is
    performed or interruption is performed.

  2. Unset BSP flag of the boot cpu in the 1st kernel

    Unsetting BSP flag can affect some real world firmware badly. For
    example, Ma verified that some HP systems fail to reboot under
    this configuration. See:
    http://lkml.indiana.edu/hypermail/linux/kernel/1308.1/03574.html

Due to the idea 1, we have to address the issue in the 2nd kernel on
AP. Then, it's impossible to know which CPU is BSP by rdmsr
instruction because the CPU is the one we are now trying to wake
up. From the same reason, it's also impossible to unset BSP flag of
the BSP by wrmsr instruction.

Next, due to the idea 2, BSP is halting in the 1st kernel while
keeping BSP flag set (or possibly could be running somewhere in
catastrophic state.) In generall, CPUs except for the boot cpu in the
2nd kernel -- the cpu under which crash happened --- can be thought of
as remaining in any inconsistent state in the 1st kernel. For APs,
it's possible to recover sane state by initiating INIT to them; see
3.7.3 Processor-specific INIT in MultiProcessor
specification. However, there's no way for BSP. Therefore, there's no
other way to disable BSP.

My motivation is to generate crash dump quickly on the system with
huge memory. We can assume such system also has a lot of N-cpus and
(N-1)-cpus are still available.

To identify which CPU is BSP, we lookup ACPI table or MP table. One
concern is that ACPI guidlines BIOS *should* list the BSP in the first
MADT LAPIC entry; not *must*. In this sense, this logic relis on BIOS
following ACPI's guideline. On the other hand, we don't need to worry
about this in MP table case because it has explit BSP flag.

To avoid any undesirable bahaviour caused by any broken BIOS that
doesn't conform to the guideline, it's enough to limit the number of
cpus to 1 by specifying maxcpu=1 or nr_cpus=1, as is currently done in
default kdump configuration. (But of course, it's problematic in
maxcpu=1 case if trying to wake up other cpus later in user space.)

SFI and devicetree doesn't provide BSP information, so there's no
functionality change in their codes, only assigning false for all the
entries, keeping interface uniform.

[ hpa: it might be better in the future for the primary kernel to
  explicitly export the APIC ID for the BSP.  The primary kernel will
  know, both due to which CPU it was booted from and because it can
  see the BSP flag.  However, this seems like a net win for now. ]

Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20130829092804.5476.95588.stgit@localhost6.localdomain6
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/mpspec.h |  2 +-
 arch/x86/kernel/acpi/boot.c   | 11 ++++++++++-
 arch/x86/kernel/apic/apic.c   | 18 +++++++++++++++++-
 arch/x86/kernel/devicetree.c  |  1 +
 arch/x86/kernel/mpparse.c     | 15 +++++++++++++--
 arch/x86/platform/sfi/sfi.c   |  2 +-
 6 files changed, 43 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index a8a4338..d96f409 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -97,7 +97,7 @@ static inline void early_reserve_e820_mpc_new(void) { }
 #define default_get_smp_config x86_init_uint_noop
 #endif
 
-void generic_processor_info(int apicid, int version);
+void generic_processor_info(int apicid, bool isbsp, int version);
 #ifdef CONFIG_ACPI
 extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
 extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 40c7660..e0ea929 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -192,6 +192,7 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 static void acpi_register_lapic(int id, u8 enabled)
 {
 	unsigned int ver = 0;
+	bool isbsp = false;
 
 	if (id >= MAX_LOCAL_APIC) {
 		printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
@@ -206,7 +207,15 @@ static void acpi_register_lapic(int id, u8 enabled)
 	if (boot_cpu_physical_apicid != -1U)
 		ver = apic_version[boot_cpu_physical_apicid];
 
-	generic_processor_info(id, ver);
+	/*
+	 * ACPI specification describes that platform firmware should
+	 * list the boot processor as the first LAPIC entry in the
+	 * MADT.
+	 */
+	if (!num_processors && !disabled_cpus)
+		isbsp = true;
+
+	generic_processor_info(id, isbsp, ver);
 }
 
 static int __init
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 488709d..a6046bb 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2113,13 +2113,29 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
-void generic_processor_info(int apicid, int version)
+void generic_processor_info(int apicid, bool isbsp, int version)
 {
 	int cpu, max = nr_cpu_ids;
 	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
 				phys_cpu_present_map);
 
 	/*
+	 * If boot cpu is AP, we now don't have any way to initialize
+	 * BSP. To save memory consumed, we disable BSP this case and
+	 * use (N-1)-cpus.
+	 */
+	if (isbsp && !boot_cpu_is_bsp) {
+		int thiscpu = num_processors + disabled_cpus;
+
+		pr_warning("ACPI: The boot cpu is not BSP. "
+			   "The BSP Processor %d/0x%x ignored.\n",
+			   thiscpu, apicid);
+
+		disabled_cpus++;
+		return;
+	}
+
+	/*
 	 * If boot cpu has not been detected yet, then only allow upto
 	 * nr_cpu_ids - 1 processors and keep one slot free for boot cpu
 	 */
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 376dc78..0ed2da8 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -182,6 +182,7 @@ static void __init dtb_lapic_setup(void)
 	pic_mode = 1;
 	register_lapic_address(r.start);
 	generic_processor_info(boot_cpu_physical_apicid,
+			       false,
 			       GET_APIC_VERSION(apic_read(APIC_LVR)));
 #endif
 }
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index d2b5648..003b07fe 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -54,6 +54,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 {
 	int apicid;
 	char *bootup_cpu = "";
+	bool isbsp = false;
 
 	if (!(m->cpuflag & CPU_ENABLED)) {
 		disabled_cpus++;
@@ -64,11 +65,21 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 
 	if (m->cpuflag & CPU_BOOTPROCESSOR) {
 		bootup_cpu = " (Bootup-CPU)";
-		boot_cpu_physical_apicid = m->apicid;
+		/*
+		 * boot cpu cannot be BSP if any crash happens on AP
+		 * and kexec enters the 2nd kernel.
+		 *
+		 * Also, boot_cpu_physical_apicid can be initialized
+		 * before reaching here; for example, in
+		 * register_lapic_address().
+		 */
+		if (boot_cpu_is_bsp && boot_cpu_physical_apicid == -1U)
+			boot_cpu_physical_apicid = m->apicid;
+		isbsp = true;
 	}
 
 	printk(KERN_INFO "Processor #%d%s\n", m->apicid, bootup_cpu);
-	generic_processor_info(apicid, m->apicver);
+	generic_processor_info(apicid, isbsp, m->apicver);
 }
 
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index bcd1a70..4f111c7 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -45,7 +45,7 @@ static void __init mp_sfi_register_lapic(u8 id)
 
 	pr_info("registering lapic[%d]\n", id);
 
-	generic_processor_info(id, GET_APIC_VERSION(apic_read(APIC_LVR)));
+	generic_processor_info(id, false, GET_APIC_VERSION(apic_read(APIC_LVR)));
 }
 
 static int __init sfi_parse_cpus(struct sfi_table_header *table)

Re: [tip:x86/bsp-hotplug] x86, apic: Disable BSP if boot cpu is AP

[H. Peter Anvin]

On 10/09/2013 04:16 PM, tip-bot for HATAYAMA Daisuke wrote:
> Commit-ID:  1d79e607332d67d9132c176d99b5e7fabe1b6b7f
> Gitweb:     http://git.kernel.org/tip/1d79e607332d67d9132c176d99b5e7fabe1b6b7f
> Author:     HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
> AuthorDate: Thu, 29 Aug 2013 18:28:04 +0900
> Committer:  H. Peter Anvin <hpa@linux.intel.com>
> CommitDate: Wed, 9 Oct 2013 15:41:11 -0700
> 
> x86, apic: Disable BSP if boot cpu is AP

This patch seems to trigger build failures in some configurations.
Specifically:

(.init.text+0x1307): undefined reference to `boot_cpu_is_bsp_init'

Unfortunately I don't have the specific configuration which triggers the
failure, as this was discovered by Fengguang's robot.

	-hpa

Re: [tip:x86/bsp-hotplug] x86, apic: Disable BSP if boot cpu is AP

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 880 bytes --]


* H. Peter Anvin <hpa@zytor.com> wrote:

> On 10/09/2013 04:16 PM, tip-bot for HATAYAMA Daisuke wrote:
> > Commit-ID:  1d79e607332d67d9132c176d99b5e7fabe1b6b7f
> > Gitweb:     http://git.kernel.org/tip/1d79e607332d67d9132c176d99b5e7fabe1b6b7f
> > Author:     HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
> > AuthorDate: Thu, 29 Aug 2013 18:28:04 +0900
> > Committer:  H. Peter Anvin <hpa@linux.intel.com>
> > CommitDate: Wed, 9 Oct 2013 15:41:11 -0700
> > 
> > x86, apic: Disable BSP if boot cpu is AP
> 
> This patch seems to trigger build failures in some configurations.
> Specifically:
> 
> (.init.text+0x1307): undefined reference to `boot_cpu_is_bsp_init'
> 
> Unfortunately I don't have the specific configuration which triggers the 
> failure, as this was discovered by Fengguang's robot.

I have triggered that too and have such a config, it's attached.

Thanks,

	Ingo

[-- Attachment #2: config-Fri_Oct_11_09_03_41_CEST_2013.bad --]
[-- Type: text/plain, Size: 99893 bytes --]

# ae34c72b
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.12.0-rc4 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not set
# CONFIG_BROKEN_BOOT_DISALLOWED is not set
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_TREE_RCU_TRACE=y
# CONFIG_RCU_BOOST is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
# CONFIG_SMP_SUPPORT is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_WANT_INTEL_MID=y
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_RDC321X=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_X86_32_IRIS=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_KVMTOOL_TEST_ENABLE is not set
CONFIG_HYPERVISOR_GUEST=y
# CONFIG_PARAVIRT is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
CONFIG_MWINCHIP3D=y
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_OOSTORE=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
CONFIG_X86_ANCIENT_MCE=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_VM86=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_LIB=y
CONFIG_MICROCODE_INTEL_EARLY=y
CONFIG_MICROCODE_AMD_EARLY=y
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
CONFIG_UP_WANTED=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_ZBUD is not set
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
# CONFIG_ARCH_RANDOM is not set
CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
# CONFIG_ACPI_THERMAL is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_EINJ=y
CONFIG_ACPI_APEI_ERST_DEBUG=y
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
# CONFIG_X86_LONGRUN is not set
CONFIG_X86_LONGHAUL=y
CONFIG_X86_E_POWERSAVER=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
# CONFIG_YENTA_TI is not set
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=y

#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_TSI57X is not set
CONFIG_RAPIDIO_CPS_XX=y
# CONFIG_RAPIDIO_TSI568 is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
# CONFIG_IPV6_PIMSM_V2 is not set
CONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_FTP is not set
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
# CONFIG_IP_SET_BITMAP_IP is not set
# CONFIG_IP_SET_BITMAP_IPMAC is not set
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
# CONFIG_IP_SET_HASH_NET is not set
# CONFIG_IP_SET_HASH_NETPORT is not set
CONFIG_IP_SET_HASH_NETIFACE=y
# CONFIG_IP_SET_LIST_SET is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
# CONFIG_IP_VS_PROTO_ESP is not set
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
# CONFIG_IP_VS_NQ is not set

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
# CONFIG_IP_VS_NFCT is not set
CONFIG_IP_VS_PE_SIP=y

#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_RAW=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_IP_DCCP=y

#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
# CONFIG_IP_DCCP_CCID3 is not set

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=y
# CONFIG_RDS_RDMA is not set
# CONFIG_RDS_TCP is not set
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_MEDIA_IB=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
# CONFIG_ATM_BR2684 is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
# CONFIG_LTPC is not set
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
# CONFIG_NET_SCH_CHOKE is not set
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_FQ is not set
CONFIG_NET_SCH_PLUG=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BLA is not set
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_VXLAN=y
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
CONFIG_NETLINK_DIAG=y
# CONFIG_NET_MPLS_GSO is not set
CONFIG_NETPRIO_CGROUP=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
# CONFIG_CAN_GW is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_LEDS=y
CONFIG_PCH_CAN=y
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_C_CAN is not set
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y

#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB2=y
CONFIG_CAN_KVASER_USB=y
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_SOFTING is not set
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
# CONFIG_DONGLE is not set
CONFIG_KINGSUN_DONGLE=y
# CONFIG_KSDAZZLE_DONGLE is not set
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
CONFIG_SIGMATEL_FIR=y
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=y
CONFIG_TOSHIBA_FIR=y
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=y
CONFIG_BT=y
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_MINSTREL_HT is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
# CONFIG_MAC80211_STA_DEBUG is not set
# CONFIG_MAC80211_HT_DEBUG is not set
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
# CONFIG_MAC80211_MPL_DEBUG is not set
# CONFIG_MAC80211_MPATH_DEBUG is not set
# CONFIG_MAC80211_MHWMP_DEBUG is not set
# CONFIG_MAC80211_MESH_SYNC_DEBUG is not set
CONFIG_MAC80211_MESH_PS_DEBUG=y
# CONFIG_MAC80211_TDLS_DEBUG is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
CONFIG_NFC_NCI=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=y
# CONFIG_NFC_SIM is not set
# CONFIG_NFC_PN544 is not set
# CONFIG_NFC_MICROREAD is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_PERCENTAGE=10
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CMA_SIZE_SEL_MIN=y
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_NVME=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_BLK_DEV_RBD=y
# CONFIG_BLK_DEV_RSXX is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_ATMEL_PWM=y
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
CONFIG_VMWARE_BALLOON=y
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_SRAM is not set
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
# CONFIG_VMWARE_VMCI is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
CONFIG_SCSI_BNX2_ISCSI=y
# CONFIG_SCSI_BNX2X_FCOE is not set
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_7000FASST=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AHA152X=y
CONFIG_SCSI_AHA1542=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_MPT3SAS is not set
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
CONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_DTC3280=y
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_ISCI=y
CONFIG_SCSI_GENERIC_NCR5380=y
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_NCR53C406A=y
CONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_PAS16=y
CONFIG_SCSI_QLOGIC_FAS=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_LPFC_DEBUG_FS=y
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_T128=y
CONFIG_SCSI_U14_34F=y
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=y
CONFIG_SCSI_NSP32=y
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_SRP=y
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
CONFIG_SCSI_CHELSIO_FCOE=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_ACPI is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not set
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_RCAR=y
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
CONFIG_SATA_SVW=y
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
CONFIG_PATA_CS5536=y
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_WINBOND_VLB=y

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
CONFIG_MD_LINEAR=y
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
# CONFIG_BCACHE_EDEBUG is not set
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
CONFIG_DM_CACHE=y
# CONFIG_DM_CACHE_MQ is not set
CONFIG_DM_CACHE_CLEANER=y
CONFIG_DM_MIRROR=y
CONFIG_DM_RAID=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not set
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
# CONFIG_DM_SWITCH is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
# CONFIG_NET_TEAM_MODE_RANDOM is not set
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_VXLAN=y
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_NTB_NETDEV is not set
CONFIG_RIONET=y
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_SUNGEM_PHY=y
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_CAIF_HSI is not set
CONFIG_CAIF_VIRTIO=y
# CONFIG_VHOST_NET is not set
CONFIG_VHOST_RING=y

#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_VORTEX=y
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
# CONFIG_ALX is not set
# CONFIG_NET_CADENCE is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_BNX2X=y
# CONFIG_BNX2X_SRIOV is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_I40E=y
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_IP1000=y
CONFIG_JME=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_MLX5_CORE=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851_MLL=y
# CONFIG_KSZ884X_PCI is not set
# CONFIG_NET_VENDOR_MYRI is not set
CONFIG_FEALNX=y
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
CONFIG_8139TOO=y
# CONFIG_SH_ETH is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_SFC=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC9194 is not set
CONFIG_EPIC100=y
CONFIG_SMSC911X=y
# CONFIG_SMSC911X_ARCH_HOOKS is not set
# CONFIG_SMSC9420 is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NIU=y
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not set
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_NET_SB1000=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
CONFIG_AMD_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SR9700=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
# CONFIG_USB_NET_NET1080 is not set
CONFIG_USB_NET_PLUSB=y
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not set
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
# CONFIG_AT76C50X_USB is not set
CONFIG_PRISM54=y
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=y
# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=y
# CONFIG_ATH_CARDS is not set
CONFIG_B43=y
# CONFIG_B43_BCMA is not set
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
# CONFIG_B43_PHY_LP is not set
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_PIO=y
# CONFIG_B43LEGACY_DMA_AND_PIO_MODE is not set
# CONFIG_B43LEGACY_DMA_MODE is not set
CONFIG_B43LEGACY_PIO_MODE=y
CONFIG_BRCMUTIL=y
# CONFIG_BRCMSMAC is not set
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=y
# CONFIG_IPW2200_MONITOR is not set
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=y
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=y
# CONFIG_IWLDVM is not set
CONFIG_IWLMVM=y

#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
CONFIG_IWLEGACY=y
CONFIG_IWL4965=y
# CONFIG_IWL3945 is not set

#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_MESH is not set
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
CONFIG_P54_LEDS=y
CONFIG_RT2X00=y
# CONFIG_RT2400PCI is not set
CONFIG_RT2500PCI=y
CONFIG_RT61PCI=y
# CONFIG_RT2800PCI is not set
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
# CONFIG_RT2800USB is not set
CONFIG_RT2X00_LIB_MMIO=y
CONFIG_RT2X00_LIB_PCI=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_RTL_CARDS is not set
CONFIG_WL_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SDIO=y
# CONFIG_WILINK_PLATFORM_DATA is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_VMXNET3=y
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
CONFIG_KEYBOARD_MPR121=y
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=y
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_HTCPEN is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
# CONFIG_TOUCHSCREEN_USB_3M is not set
# CONFIG_TOUCHSCREEN_USB_ITM is not set
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
# CONFIG_TOUCHSCREEN_USB_ELO is not set
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_W90X900=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMPE=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=y
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_GP2A=y
CONFIG_INPUT_GPIO_TILT_POLLED=y
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATLAS_BTNS=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=y
# CONFIG_INPUT_ADXL34X_I2C is not set
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_CMA3000=y
# CONFIG_INPUT_CMA3000_I2C is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y
# CONFIG_N_GSM is not set
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_PNP is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MFD_HSU=y
CONFIG_SERIAL_MFD_HSU_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_ST_ASC=y
# CONFIG_SERIAL_ST_ASC_CONSOLE is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_EXYNOS is not set
CONFIG_HW_RANDOM_TPM=y
CONFIG_NVRAM=y
CONFIG_DTLK=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
# CONFIG_SONYPI is not set
CONFIG_MWAVE=y
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_INFINEON=y
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_ST33_I2C is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_ELEKTOR is not set
CONFIG_SCx200_ACB=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI clients
#
CONFIG_HSI_CHAR=y

#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_PARPORT=y
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=y
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_PINCTRL=y

#
# Pin controllers
#
# CONFIG_PINMUX is not set
CONFIG_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_BAYTRAIL is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_TS5500=y
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_VX855=y
# CONFIG_GPIO_LYNXPOINT is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_AMD8111=y
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MCP23S08=y

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#
# CONFIG_GPIO_KEMPLD is not set

#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_PALMAS is not set
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y

#
# USB GPIO expanders:
#
# CONFIG_GPIO_VIPERBOARD is not set
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_DA9052=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_TWL4030_MADC=y
# CONFIG_BATTERY_RX51 is not set
CONFIG_CHARGER_ISP1704=y
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_HTU21=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NCT6775 is not set
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_LM25066=y
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_ZL6100 is not set
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_WM8350 is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_MC13783_ADC=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y

#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_MC13783=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_MADC=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEO_V4L2_INT_DEVICE=y
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_RC_DECODERS is not set
# CONFIG_RC_DEVICES is not set
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=y
# CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV is not set
# CONFIG_USB_GSPCA is not set
CONFIG_USB_PWC=y
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_PWC_INPUT_EVDEV is not set
CONFIG_VIDEO_CPIA2=y
CONFIG_USB_ZR364XX=y
CONFIG_USB_STKWEBCAM=y
CONFIG_USB_S2255=y
# CONFIG_USB_SN9C102 is not set
CONFIG_VIDEO_USBTV=y

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160=y

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_CX231XX=y
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_TM6000=y

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_RC=y
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_VIDEO_VIA_CAMERA=y
CONFIG_VIDEO_TIMBERDALE=y
# CONFIG_SOC_CAMERA is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_MEDIA_PARPORT_SUPPORT is not set
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_CYPRESS_FIRMWARE=y

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_WM8775=y

#
# RDS decoders
#

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TVP5150=y

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=y

#
# Video encoders
#

#
# Camera sensor devices
#
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_MT9V011=y

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_UMS is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_VMWGFX=y
# CONFIG_DRM_VMWGFX_FBCON is not set
CONFIG_DRM_GMA500=y
CONFIG_DRM_GMA600=y
# CONFIG_DRM_GMA3600 is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
# CONFIG_DRM_QXL is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_HDMI=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
# CONFIG_FB_BIG_ENDIAN is not set
CONFIG_FB_LITTLE_ENDIAN=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
CONFIG_FB_ARC=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
# CONFIG_FB_LE80578 is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_3DFX_I2C is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=y
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
CONFIG_FB_AUO_K1901=y
# CONFIG_FB_SIMPLE is not set
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_ATMEL_PWM=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_MAX8925=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_LM3630=y
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_HUION=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=y
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LENOVO_TPKBD=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LCD is not set
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PICOLCD_CIR is not set
CONFIG_HID_PRIMAX=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_FUSBH200_HCD=y
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_STORAGE_ENE_UB6250=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_DEBUG=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=y
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_ZTE=y
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=y
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_ATM=y
# CONFIG_USB_SPEEDTOUCH is not set
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_USB_ISP1301=y
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_GADGET is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_I1480U=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_PXAV3=y
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_ATMEL_PWM=y
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_WM8350 is not set
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_MC13783=y
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=y
CONFIG_LEDS_BLINKM=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_MLX5_INFINIBAND=y
# CONFIG_INFINIBAND_NES is not set
# CONFIG_INFINIBAND_OCRDMA is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# CONFIG_INFINIBAND_SRP is not set
CONFIG_INFINIBAND_ISER=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=y
CONFIG_INTEL_IOATDMA=y
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
CONFIG_DW_DMAC_PCI=y
CONFIG_TIMB_DMA=y
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=y
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_UIO_MF624=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
CONFIG_ASUS_LAPTOP=y
CONFIG_DELL_LAPTOP=y
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=y
CONFIG_HP_ACCEL=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
# CONFIG_THINKPAD_ACPI_VIDEO is not set
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
# CONFIG_SENSORS_HDAPS is not set
CONFIG_EEEPC_LAPTOP=y
# CONFIG_ACPI_WMI is not set
CONFIG_TOPSTAR_LAPTOP=y
# CONFIG_TOSHIBA_BT_RFKILL is not set
CONFIG_ACPI_CMPC=y
CONFIG_INTEL_IPS=y
CONFIG_IBM_RTL=y
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=y
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
CONFIG_PVPANIC=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
CONFIG_COMMON_CLK_WM831X=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_S2MPS11=y

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
CONFIG_MAILBOX=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
# CONFIG_VME_CA91CX42 is not set
CONFIG_VME_TSI148=y

#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set

#
# VME Device Drivers
#
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_TWL=y
# CONFIG_PWM_TWL_LED is not set
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_VARS_PSTORE=y
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_HFSPLUS_FS_POSIX_ACL=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not set
# CONFIG_F2FS_FS_XATTR is not set
# CONFIG_EFIVAR_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
# CONFIG_CIFS_POSIX is not set
# CONFIG_CIFS_ACL is not set
# CONFIG_CIFS_DEBUG is not set
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_SMB2=y
CONFIG_CIFS_FSCACHE=y
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=y
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
# CONFIG_PROVE_RCU_DELAY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
CONFIG_RCU_TRACE=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
CONFIG_TEST_LIST_SORT=y
CONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_RBTREE_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_X86_DEBUG_STATIC_CPU_HAS=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_APPARMOR_HASH is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_YAMA_STACKED is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
# CONFIG_IMA_APPRAISE is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_YAMA is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_LGUEST is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
# CONFIG_DDR is not set
CONFIG_UCS2_STRING=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y

Re: [PATCH 0/2] x86, apic: Disable BSP if boot cpu is AP

[Petr Tesarik]

On Wed, 9 Oct 2013 16:20:12 -0400
Vivek Goyal <vgoyal@redhat.com> wrote:

> On Fri, Aug 30, 2013 at 08:43:56AM -0700, H. Peter Anvin wrote:
> > On 08/29/2013 04:51 PM, HATAYAMA Daisuke wrote:
> > > 
> > > This is not a regression just as Eric explains.
> > > 
> > > There is also my explanation in the description of the 2nd patch. I
> > > should have described so here explicitly.
> > > 
> > 
> > OK.  We're probably days away from a merge window, so I would like to
> > put this in the queue for 3.13.
> 
> Hi hpa,
> 
> Have you queued up these patches for 3.13?

Yeah, I'm also interested. But I think we were waiting for HATAYAMA
Daisuke to send a cleaned up version of the patch set.

@HATAYAMA: If you're too busy to clean up the series, I can do that for
you and re-send it here. But I don't want to "steal" the work from you.

Petr T

Re: [tip:x86/bsp-hotplug] x86, apic: Disable BSP if boot cpu is AP

[H. Peter Anvin]

On 10/12/2013 10:42 AM, Ingo Molnar wrote:
> 
> * H. Peter Anvin <hpa@zytor.com> wrote:
> 
>> On 10/09/2013 04:16 PM, tip-bot for HATAYAMA Daisuke wrote:
>>> Commit-ID:  1d79e607332d67d9132c176d99b5e7fabe1b6b7f
>>> Gitweb:     http://git.kernel.org/tip/1d79e607332d67d9132c176d99b5e7fabe1b6b7f
>>> Author:     HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
>>> AuthorDate: Thu, 29 Aug 2013 18:28:04 +0900
>>> Committer:  H. Peter Anvin <hpa@linux.intel.com>
>>> CommitDate: Wed, 9 Oct 2013 15:41:11 -0700
>>>
>>> x86, apic: Disable BSP if boot cpu is AP
>>
>> This patch seems to trigger build failures in some configurations.
>> Specifically:
>>
>> (.init.text+0x1307): undefined reference to `boot_cpu_is_bsp_init'
>>
>> Unfortunately I don't have the specific configuration which triggers the 
>> failure, as this was discovered by Fengguang's robot.
> 
> I have triggered that too and have such a config, it's attached.

Okay, thinking about this again, this patchset is in fact broken on:

1. Any configuration which has CONFIG_SMP=n and CONFIG_X86_UP_APIC=n.

This is a built-time problem.

2. Any CPU which is old enough that MSR_IA32_APICBASE doesn't exist.

This is a fatal runtime bug.

3. Any clustered solution which involves a third-party cluster
controller such that MSR_IA32_APICBASE may not reflect the reality of
the system.

This is a less critical issue as "all" it ought to make happen is to
disable some CPUs which didn't need it.

Hatayama-san, you got this build bug report almost a month ago.  It
looks like it is going to need a fair bit of cleanup, so I fear this is
going to be dropped for v3.13.

	-hpa

Re: [tip:x86/bsp-hotplug] x86, apic: Disable BSP if boot cpu is AP

[HATAYAMA Daisuke]

(2013/11/12 4:54), H. Peter Anvin wrote:
> On 10/12/2013 10:42 AM, Ingo Molnar wrote:
>>
>> * H. Peter Anvin <hpa@zytor.com> wrote:
>>
>>> On 10/09/2013 04:16 PM, tip-bot for HATAYAMA Daisuke wrote:
>>>> Commit-ID:  1d79e607332d67d9132c176d99b5e7fabe1b6b7f
>>>> Gitweb:     http://git.kernel.org/tip/1d79e607332d67d9132c176d99b5e7fabe1b6b7f
>>>> Author:     HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
>>>> AuthorDate: Thu, 29 Aug 2013 18:28:04 +0900
>>>> Committer:  H. Peter Anvin <hpa@linux.intel.com>
>>>> CommitDate: Wed, 9 Oct 2013 15:41:11 -0700
>>>>
>>>> x86, apic: Disable BSP if boot cpu is AP
>>>
>>> This patch seems to trigger build failures in some configurations.
>>> Specifically:
>>>
>>> (.init.text+0x1307): undefined reference to `boot_cpu_is_bsp_init'
>>>
>>> Unfortunately I don't have the specific configuration which triggers the
>>> failure, as this was discovered by Fengguang's robot.
>>
>> I have triggered that too and have such a config, it's attached.
>
> Okay, thinking about this again, this patchset is in fact broken on:
>
> 1. Any configuration which has CONFIG_SMP=n and CONFIG_X86_UP_APIC=n.
>
> This is a built-time problem.
>
> 2. Any CPU which is old enough that MSR_IA32_APICBASE doesn't exist.
>
> This is a fatal runtime bug.
>
> 3. Any clustered solution which involves a third-party cluster
> controller such that MSR_IA32_APICBASE may not reflect the reality of
> the system.
>
> This is a less critical issue as "all" it ought to make happen is to
> disable some CPUs which didn't need it.
>
> Hatayama-san, you got this build bug report almost a month ago.  It
> looks like it is going to need a fair bit of cleanup, so I fear this is
> going to be dropped for v3.13.
>
> 	-hpa
>

Thanks for pointing out that. I think the first two issues has already been
fixed in v3 version. I've just posted v5 version a little time ago. BTW,
I changed the basic design at v4 where we specify the initial APIC ID of the
processor we want to disable in the kdump 2nd kernel from the the 1st kernel
through newly introduced disable_cpu_apicid kernel parameter; it might be
similar to the idea you described in the patch description of tip tree.

I don't know the third issue. Could you explain what kind of things can happen
on clustered system? Only IA32_APIC_BASE MSR is no longer trusted? Or are
there other things we can possibly no longer trust?

Also, could you explain what you suggest to deal with the issue in more detail?

-- 
Thanks.
HATAYAMA, Daisuke

Re: [tip:x86/bsp-hotplug] x86, apic: Disable BSP if boot cpu is AP

[H. Peter Anvin]

On 11/12/2013 02:20 AM, HATAYAMA Daisuke wrote:
> 
> Thanks for pointing out that. I think the first two issues has already been
> fixed in v3 version. I've just posted v5 version a little time ago.

OK, I see now.  It looks like it was radically changed, so the branch in
the -tip tree is completely stale.

> BTW,
> I changed the basic design at v4 where we specify the initial APIC ID of
> the
> processor we want to disable in the kdump 2nd kernel from the the 1st
> kernel
> through newly introduced disable_cpu_apicid kernel parameter; it might be
> similar to the idea you described in the patch description of tip tree.

> I don't know the third issue. Could you explain what kind of things can
> happen on clustered system? Only IA32_APIC_BASE MSR is no longer trusted? Or are
> there other things we can possibly no longer trust?

On a clustered system, the CPU APICIDs will duplicate, as only a
hardware-specific method can obtain the cluster-wide ID.  That is why we
have struct apic.get_apic_id().

IA32_APIC_BASE_MSR is another matter... it doesn't even exist on older
hardware.  It might be as simple as if IA32_APIC_BASE_MSR doesn't exist
we ignore this whole mechanism (this applies to P5 and earlier, but also
modern derivatives like Quark) but we can't blindly touch this register
as it might trap.  At the very least it needs to be rdmsr_safe().

> Also, could you explain what you suggest to deal with the issue in more
> detail?

I think the only thing we can do is to record in the first kernel on
which CPU we were booted on.  Then there is no need to look at the BSP
flag in APIC_BASE_MSR at all or anything similar.

	-hpa