[PATCH 01/10] staging: rtl8188eu: Remove empty header file

[PATCH 01/10] staging: rtl8188eu: Remove empty header file

[navin patidar]

drv_types_linux.h is empty, so remove the header file and its
reference.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/include/drv_types.h      |    1 -
 .../staging/rtl8188eu/include/drv_types_linux.h    |   24 --------------------
 2 files changed, 25 deletions(-)
 delete mode 100644 drivers/staging/rtl8188eu/include/drv_types_linux.h

diff --git a/drivers/staging/rtl8188eu/include/drv_types.h b/drivers/staging/rtl8188eu/include/drv_types.h
index 936c196..10cc1a1 100644
--- a/drivers/staging/rtl8188eu/include/drv_types.h
+++ b/drivers/staging/rtl8188eu/include/drv_types.h
@@ -31,7 +31,6 @@
 
 #include <osdep_service.h>
 #include <wlan_bssdef.h>
-#include <drv_types_linux.h>
 #include <rtw_ht.h>
 #include <rtw_cmd.h>
 #include <rtw_xmit.h>
diff --git a/drivers/staging/rtl8188eu/include/drv_types_linux.h b/drivers/staging/rtl8188eu/include/drv_types_linux.h
deleted file mode 100644
index 812b744..0000000
--- a/drivers/staging/rtl8188eu/include/drv_types_linux.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- *
- ******************************************************************************/
-#ifndef __DRV_TYPES_LINUX_H__
-#define __DRV_TYPES_LINUX_H__
-
-
-#endif
-- 
1.7.10.4

[PATCH 02/10] staging: rtl8188eu: Remove rtw_led_blink_cmd() function.

[navin patidar]

rtw_led_blink_cmd() isn't being used by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/core/rtw_cmd.c    |   35 ---------------------------
 drivers/staging/rtl8188eu/include/rtw_cmd.h |    1 -
 2 files changed, 36 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index c2fb050..1e0b8b4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -1431,41 +1431,6 @@ exit:
 	return res;
 }
 
-u8 rtw_led_blink_cmd(struct adapter *padapter, struct LED_871x *pLed)
-{
-	struct	cmd_obj *pcmdobj;
-	struct	LedBlink_param *ledBlink_param;
-	struct	cmd_priv   *pcmdpriv = &padapter->cmdpriv;
-
-	u8	res = _SUCCESS;
-
-
-	RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+rtw_led_blink_cmd\n"));
-
-	pcmdobj = (struct cmd_obj *)rtw_zmalloc(sizeof(struct	cmd_obj));
-	if (pcmdobj == NULL) {
-		res = _FAIL;
-		goto exit;
-	}
-
-	ledBlink_param = (struct	LedBlink_param *)rtw_zmalloc(sizeof(struct	LedBlink_param));
-	if (ledBlink_param == NULL) {
-		kfree(pcmdobj);
-		res = _FAIL;
-		goto exit;
-	}
-
-	ledBlink_param->pLed = pLed;
-
-	init_h2fwcmd_w_parm_no_rsp(pcmdobj, ledBlink_param, GEN_CMD_CODE(_LedBlink));
-	res = rtw_enqueue_cmd(pcmdpriv, pcmdobj);
-
-exit:
-
-
-	return res;
-}
-
 u8 rtw_set_csa_cmd(struct adapter *padapter, u8 new_ch_no)
 {
 	struct	cmd_obj *pcmdobj;
diff --git a/drivers/staging/rtl8188eu/include/rtw_cmd.h b/drivers/staging/rtl8188eu/include/rtw_cmd.h
index 3d34702..66467f7 100644
--- a/drivers/staging/rtl8188eu/include/rtw_cmd.h
+++ b/drivers/staging/rtl8188eu/include/rtw_cmd.h
@@ -807,7 +807,6 @@ u8 rtw_chk_hi_queue_cmd(struct adapter *padapter);
 u8 rtw_set_ch_cmd(struct adapter *padapter, u8 ch, u8 bw, u8 ch_offset,
 		  u8 enqueue);
 u8 rtw_set_chplan_cmd(struct adapter *padapter, u8 chplan, u8 enqueue);
-u8 rtw_led_blink_cmd(struct adapter *padapter, struct LED_871x *pLed);
 u8 rtw_set_csa_cmd(struct adapter *padapter, u8 new_ch_no);
 u8 rtw_tdls_cmd(struct adapter *padapter, u8 *addr, u8 option);
 
-- 
1.7.10.4

[PATCH 03/10] staging: rtl8188eu: Remove _ReadLEDSetting() function.

[navin patidar]

_ReadLEDSetting() doesn't read led settings this function actually
initialize  member variables of struct led_priv, we should do that
inside rtl8188eu_InitSwLeds().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/hal/rtl8188eu_led.c |    4 ++++
 drivers/staging/rtl8188eu/hal/usb_halinit.c   |   12 ------------
 2 files changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
index 08dfd94..01eeb70 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
@@ -92,8 +92,12 @@ exit:
 void rtl8188eu_InitSwLeds(struct adapter *padapter)
 {
 	struct led_priv *pledpriv = &(padapter->ledpriv);
+	struct hal_data_8188e   *haldata = GET_HAL_DATA(padapter);
 
+	pledpriv->bRegUseLed = true;
+	pledpriv->LedStrategy = SW_LED_MODE1;
 	pledpriv->LedControlHandler = LedControl8188eu;
+	haldata->bLedOpenDrain = true;
 
 	InitLed871x(padapter, &(pledpriv->SwLed0), LED_PIN_LED0);
 
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index c92067f..0dfd62b 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -1129,16 +1129,6 @@ static unsigned int rtl8188eu_inirp_deinit(struct adapter *Adapter)
 /*	EEPROM/EFUSE Content Parsing */
 /*  */
 /*  */
-static void _ReadLEDSetting(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail)
-{
-	struct led_priv *pledpriv = &(Adapter->ledpriv);
-	struct hal_data_8188e	*haldata = GET_HAL_DATA(Adapter);
-
-	pledpriv->bRegUseLed = true;
-	pledpriv->LedStrategy = SW_LED_MODE1;
-	haldata->bLedOpenDrain = true;/*  Support Open-drain arrangement for controlling the LED. */
-}
-
 static void Hal_EfuseParsePIDVID_8188EU(struct adapter *adapt, u8 *hwinfo, bool AutoLoadFail)
 {
 	struct hal_data_8188e	*haldata = GET_HAL_DATA(adapt);
@@ -1215,8 +1205,6 @@ readAdapterInfo_8188EU(
 	/*  */
 	Hal_InitChannelPlan(adapt);
 	Hal_CustomizeByCustomerID_8188EU(adapt);
-
-	_ReadLEDSetting(adapt, eeprom->efuse_eeprom_data, eeprom->bautoload_fail_flag);
 }
 
 static void _ReadPROMContent(
-- 
1.7.10.4

[PATCH 04/10] staging: rtl8188eu: Remove _InitHWLed() function.

[navin patidar]

_InitHWLed() function does nothing.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/hal/usb_halinit.c |   14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 0dfd62b..617e4c6 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -424,18 +424,6 @@ static void _InitBeaconMaxError(struct adapter *Adapter, bool		InfraMode)
 {
 }
 
-static void _InitHWLed(struct adapter *Adapter)
-{
-	struct led_priv *pledpriv = &(Adapter->ledpriv);
-
-	if (pledpriv->LedStrategy != HW_LED)
-		return;
-
-/*  HW led control */
-/*  to do .... */
-/* must consider cases of antenna diversity/ commbo card/solo card/mini card */
-}
-
 static void _InitRDGSetting(struct adapter *Adapter)
 {
 	rtw_write8(Adapter, REG_RD_CTRL, 0xFF);
@@ -870,8 +858,6 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
 	rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400);	/*  unit: 256us. 256ms */
 	rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400);	/*  unit: 256us. 256ms */
 
-	_InitHWLed(Adapter);
-
 	/* Keep RfRegChnlVal for later use. */
 	haldata->RfRegChnlVal[0] = PHY_QueryRFReg(Adapter, (enum rf_radio_path)0, RF_CHNLBW, bRFRegOffsetMask);
 	haldata->RfRegChnlVal[1] = PHY_QueryRFReg(Adapter, (enum rf_radio_path)1, RF_CHNLBW, bRFRegOffsetMask);
-- 
1.7.10.4

[PATCH 05/10] staging: rtl8188eu: Simplify led blinking strategy code.

[navin patidar]

driver has code to blink the led in 7 different ways.
struct led_priv contains an enum LED_STRATEGY_871x variable which is
initialized to SW_LED_MODE1 inside rtl8188eu_InitSwLeds() function.
it means driver is hard coded to use only SW_LED_MODE1 blinking strategy.
so we can remove the code related to other blinking strategies
e.g. SW_LED_MODE[0|2|3|4|5|6].

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/core/rtw_led.c | 1412 +++---------------------------
 1 file changed, 101 insertions(+), 1311 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_led.c b/drivers/staging/rtl8188eu/core/rtw_led.c
index 42b41ab..c42e176 100644
--- a/drivers/staging/rtl8188eu/core/rtw_led.c
+++ b/drivers/staging/rtl8188eu/core/rtw_led.c
@@ -40,7 +40,6 @@ void BlinkTimerCallback(void *data)
 /*  */
 /*	Description: */
 /*		Callback function of LED BlinkWorkItem. */
-/*		We dispatch acture LED blink action according to LedStrategy. */
 /*  */
 void BlinkWorkItemCallback(struct work_struct *work)
 {
@@ -101,87 +100,6 @@ void DeInitLed871x(struct LED_871x *pLed)
 /*		It toggle off LED and schedule corresponding timer if necessary. */
 /*  */
 
-static void SwLedBlink(struct LED_871x *pLed)
-{
-	struct adapter *padapter = pLed->padapter;
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
-	u8 bStopBlinking = false;
-
-	/*  Change LED according to BlinkingLedState specified. */
-	if (pLed->BlinkingLedState == RTW_LED_ON) {
-		SwLedOn(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
-	} else {
-		SwLedOff(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
-	}
-
-	/*  Determine if we shall change LED state again. */
-	pLed->BlinkTimes--;
-	switch (pLed->CurrLedState) {
-	case LED_BLINK_NORMAL:
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		break;
-	case LED_BLINK_StartToBlink:
-		if (check_fwstate(pmlmepriv, _FW_LINKED) && check_fwstate(pmlmepriv, WIFI_STATION_STATE))
-			bStopBlinking = true;
-		if (check_fwstate(pmlmepriv, _FW_LINKED) &&
-		    (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) ||
-		    check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)))
-			bStopBlinking = true;
-		else if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		break;
-	case LED_BLINK_WPS:
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		break;
-	default:
-		bStopBlinking = true;
-		break;
-	}
-
-	if (bStopBlinking) {
-		/* if (padapter->pwrctrlpriv.cpwm >= PS_STATE_S2) */
-		if (0) {
-			SwLedOff(padapter, pLed);
-		} else if ((check_fwstate(pmlmepriv, _FW_LINKED)) && (!pLed->bLedOn)) {
-			SwLedOn(padapter, pLed);
-		} else if ((check_fwstate(pmlmepriv, _FW_LINKED)) &&  pLed->bLedOn) {
-			SwLedOff(padapter, pLed);
-		}
-		pLed->BlinkTimes = 0;
-		pLed->bLedBlinkInProgress = false;
-	} else {
-		/*  Assign LED state to toggle. */
-		if (pLed->BlinkingLedState == RTW_LED_ON)
-			pLed->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed->BlinkingLedState = RTW_LED_ON;
-
-		/*  Schedule a timer to toggle LED state. */
-		switch (pLed->CurrLedState) {
-		case LED_BLINK_NORMAL:
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
-			break;
-		case LED_BLINK_SLOWLY:
-		case LED_BLINK_StartToBlink:
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
-			break;
-		case LED_BLINK_WPS:
-			if (pLed->BlinkingLedState == RTW_LED_ON)
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL);
-			else
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_LONG_INTERVAL);
-			break;
-		default:
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
-			break;
-		}
-	}
-}
-
 static void SwLedBlink1(struct LED_871x *pLed)
 {
 	struct adapter *padapter = pLed->padapter;
@@ -277,1051 +195,115 @@ static void SwLedBlink1(struct LED_871x *pLed)
 			}
 			pLed->BlinkTimes = 0;
 			pLed->bLedBlinkInProgress = false;
-		} else {
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_BLINK_WPS:
-		if (pLed->bLedOn)
-			pLed->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		break;
-	case LED_BLINK_WPS_STOP:	/* WPS success */
-		if (pLed->BlinkingLedState == RTW_LED_ON)
-			bStopBlinking = false;
-		else
-			bStopBlinking = true;
-
-		if (bStopBlinking) {
-			pLed->bLedLinkBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_NORMAL;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
-			RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-
-			pLed->bLedWPSBlinkInProgress = false;
-		} else {
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static void SwLedBlink2(struct LED_871x *pLed)
-{
-	struct adapter *padapter = pLed->padapter;
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
-	u8 bStopBlinking = false;
-
-	/*  Change LED according to BlinkingLedState specified. */
-	if (pLed->BlinkingLedState == RTW_LED_ON) {
-		SwLedOn(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
-	} else {
-		SwLedOff(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
-	}
-
-	switch (pLed->CurrLedState) {
-	case LED_BLINK_SCAN:
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else if (check_fwstate(pmlmepriv, _FW_LINKED)) {
-				pLed->CurrLedState = RTW_LED_ON;
-				pLed->BlinkingLedState = RTW_LED_ON;
-				SwLedOn(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("stop scan blink CurrLedState %d\n", pLed->CurrLedState));
-
-			} else if (!check_fwstate(pmlmepriv, _FW_LINKED)) {
-				pLed->CurrLedState = RTW_LED_OFF;
-				pLed->BlinkingLedState = RTW_LED_OFF;
-				SwLedOff(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("stop scan blink CurrLedState %d\n", pLed->CurrLedState));
-			}
-			pLed->bLedScanBlinkInProgress = false;
-		} else {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else {
-				 if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-			}
-		}
-		break;
-	case LED_BLINK_TXRX:
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else if (check_fwstate(pmlmepriv, _FW_LINKED)) {
-				pLed->CurrLedState = RTW_LED_ON;
-				pLed->BlinkingLedState = RTW_LED_ON;
-				SwLedOn(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("stop CurrLedState %d\n", pLed->CurrLedState));
-			} else if (!check_fwstate(pmlmepriv, _FW_LINKED)) {
-				pLed->CurrLedState = RTW_LED_OFF;
-				pLed->BlinkingLedState = RTW_LED_OFF;
-				SwLedOff(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("stop CurrLedState %d\n", pLed->CurrLedState));
-			}
-			pLed->bLedBlinkInProgress = false;
-		} else {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else {
-				 if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-			}
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static void SwLedBlink3(struct LED_871x *pLed)
-{
-	struct adapter *padapter = pLed->padapter;
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
-	u8 bStopBlinking = false;
-
-	/*  Change LED according to BlinkingLedState specified. */
-	if (pLed->BlinkingLedState == RTW_LED_ON) {
-		SwLedOn(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
-	} else {
-		if (pLed->CurrLedState != LED_BLINK_WPS_STOP)
-			SwLedOff(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
-	}
-
-	switch (pLed->CurrLedState) {
-	case LED_BLINK_SCAN:
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else if (check_fwstate(pmlmepriv, _FW_LINKED)) {
-				pLed->CurrLedState = RTW_LED_ON;
-				pLed->BlinkingLedState = RTW_LED_ON;
-				if (!pLed->bLedOn)
-					SwLedOn(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-			} else if (!check_fwstate(pmlmepriv, _FW_LINKED)) {
-				pLed->CurrLedState = RTW_LED_OFF;
-				pLed->BlinkingLedState = RTW_LED_OFF;
-				if (pLed->bLedOn)
-					SwLedOff(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-			}
-			pLed->bLedScanBlinkInProgress = false;
-		} else {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else {
-				if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-			}
-		}
-		break;
-	case LED_BLINK_TXRX:
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else if (check_fwstate(pmlmepriv, _FW_LINKED)) {
-				pLed->CurrLedState = RTW_LED_ON;
-				pLed->BlinkingLedState = RTW_LED_ON;
-				if (!pLed->bLedOn)
-					SwLedOn(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-			} else if (!check_fwstate(pmlmepriv, _FW_LINKED)) {
-				pLed->CurrLedState = RTW_LED_OFF;
-				pLed->BlinkingLedState = RTW_LED_OFF;
-
-				if (pLed->bLedOn)
-					SwLedOff(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-			}
-			pLed->bLedBlinkInProgress = false;
-		} else {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else {
-				if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-			}
-		}
-		break;
-	case LED_BLINK_WPS:
-		if (pLed->bLedOn)
-			pLed->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		break;
-	case LED_BLINK_WPS_STOP:	/* WPS success */
-		if (pLed->BlinkingLedState == RTW_LED_ON) {
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
-			bStopBlinking = false;
-		} else {
-			bStopBlinking = true;
-		}
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-				SwLedOff(padapter, pLed);
-			} else {
-				pLed->CurrLedState = RTW_LED_ON;
-				pLed->BlinkingLedState = RTW_LED_ON;
-				SwLedOn(padapter, pLed);
-				RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-			}
-			pLed->bLedWPSBlinkInProgress = false;
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static void SwLedBlink4(struct LED_871x *pLed)
-{
-	struct adapter *padapter = pLed->padapter;
-	struct led_priv *ledpriv = &(padapter->ledpriv);
-	struct LED_871x *pLed1 = &(ledpriv->SwLed1);
-	u8 bStopBlinking = false;
-
-	/*  Change LED according to BlinkingLedState specified. */
-	if (pLed->BlinkingLedState == RTW_LED_ON) {
-		SwLedOn(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
-	} else {
-		SwLedOff(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
-	}
-
-	if (!pLed1->bLedWPSBlinkInProgress && pLed1->BlinkingLedState == LED_UNKNOWN) {
-		pLed1->BlinkingLedState = RTW_LED_OFF;
-		pLed1->CurrLedState = RTW_LED_OFF;
-		SwLedOff(padapter, pLed1);
-	}
-
-	switch (pLed->CurrLedState) {
-	case LED_BLINK_SLOWLY:
-		if (pLed->bLedOn)
-			pLed->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-		break;
-	case LED_BLINK_StartToBlink:
-		if (pLed->bLedOn) {
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
-		} else {
-			pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
-		}
-		break;
-	case LED_BLINK_SCAN:
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = false;
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) {
-				SwLedOff(padapter, pLed);
-			} else {
-				pLed->bLedNoLinkBlinkInProgress = false;
-				pLed->CurrLedState = LED_BLINK_SLOWLY;
-				if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-			}
-			pLed->bLedScanBlinkInProgress = false;
-		} else {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) {
-				SwLedOff(padapter, pLed);
-			} else {
-				 if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-			}
-		}
-		break;
-	case LED_BLINK_TXRX:
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) {
-				SwLedOff(padapter, pLed);
-			} else {
-				pLed->bLedNoLinkBlinkInProgress = true;
-				pLed->CurrLedState = LED_BLINK_SLOWLY;
-				if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-			}
-			pLed->bLedBlinkInProgress = false;
-		} else {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) {
-				SwLedOff(padapter, pLed);
-			} else {
-				 if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-			}
-		}
-		break;
-	case LED_BLINK_WPS:
-		if (pLed->bLedOn) {
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
-		} else {
-			pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
-		}
-		break;
-	case LED_BLINK_WPS_STOP:	/* WPS authentication fail */
-		if (pLed->bLedOn)
-			pLed->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed->BlinkingLedState = RTW_LED_ON;
-
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
-		break;
-	case LED_BLINK_WPS_STOP_OVERLAP:	/* WPS session overlap */
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0) {
-			if (pLed->bLedOn)
-				pLed->BlinkTimes = 1;
-			else
-				bStopBlinking = true;
-		}
-
-		if (bStopBlinking) {
-			pLed->BlinkTimes = 10;
-			pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
-		} else {
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
-		}
-		break;
-	default:
-		break;
-	}
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("SwLedBlink4 CurrLedState %d\n", pLed->CurrLedState));
-}
-
-static void SwLedBlink5(struct LED_871x *pLed)
-{
-	struct adapter *padapter = pLed->padapter;
-	u8 bStopBlinking = false;
-
-	/*  Change LED according to BlinkingLedState specified. */
-	if (pLed->BlinkingLedState == RTW_LED_ON) {
-		SwLedOn(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
-	} else {
-		SwLedOff(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
-	}
-
-	switch (pLed->CurrLedState) {
-	case LED_BLINK_SCAN:
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) {
-				pLed->CurrLedState = RTW_LED_OFF;
-				pLed->BlinkingLedState = RTW_LED_OFF;
-				if (pLed->bLedOn)
-					SwLedOff(padapter, pLed);
-			} else {
-					pLed->CurrLedState = RTW_LED_ON;
-					pLed->BlinkingLedState = RTW_LED_ON;
-					if (!pLed->bLedOn)
-						_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-			}
-
-			pLed->bLedScanBlinkInProgress = false;
-		} else {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) {
-				SwLedOff(padapter, pLed);
-			} else {
-				if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-			}
-		}
-		break;
-	case LED_BLINK_TXRX:
-		pLed->BlinkTimes--;
-		if (pLed->BlinkTimes == 0)
-			bStopBlinking = true;
-
-		if (bStopBlinking) {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) {
-				pLed->CurrLedState = RTW_LED_OFF;
-				pLed->BlinkingLedState = RTW_LED_OFF;
-				if (pLed->bLedOn)
-					SwLedOff(padapter, pLed);
-			} else {
-				pLed->CurrLedState = RTW_LED_ON;
-				pLed->BlinkingLedState = RTW_LED_ON;
-				if (!pLed->bLedOn)
-					_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-			}
-
-			pLed->bLedBlinkInProgress = false;
-		} else {
-			if (padapter->pwrctrlpriv.rf_pwrstate != rf_on && padapter->pwrctrlpriv.rfoff_reason > RF_CHANGE_BY_PS) {
-				SwLedOff(padapter, pLed);
-			} else {
-				 if (pLed->bLedOn)
-					pLed->BlinkingLedState = RTW_LED_OFF;
-				else
-					pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-			}
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("SwLedBlink5 CurrLedState %d\n", pLed->CurrLedState));
-}
-
-static void SwLedBlink6(struct LED_871x *pLed)
-{
-	struct adapter *padapter = pLed->padapter;
-
-	/*  Change LED according to BlinkingLedState specified. */
-	if (pLed->BlinkingLedState == RTW_LED_ON) {
-		SwLedOn(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn on\n", pLed->BlinkTimes));
-	} else {
-		SwLedOff(padapter, pLed);
-		RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Blinktimes (%d): turn off\n", pLed->BlinkTimes));
-	}
-
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("<==== blink6\n"));
-}
-
- /* ALPHA, added by chiyoko, 20090106 */
-static void SwLedControlMode1(struct adapter *padapter, enum LED_CTL_MODE LedAction)
-{
-	struct led_priv *ledpriv = &(padapter->ledpriv);
-	struct LED_871x *pLed = &(ledpriv->SwLed0);
-	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
-
-	switch (LedAction) {
-	case LED_CTL_POWER_ON:
-	case LED_CTL_START_TO_LINK:
-	case LED_CTL_NO_LINK:
-		if (!pLed->bLedNoLinkBlinkInProgress) {
-			if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
-				return;
-			if (pLed->bLedLinkBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedLinkBlinkInProgress = false;
-			}
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-
-			pLed->bLedNoLinkBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_SLOWLY;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_LINK:
-		if (!pLed->bLedLinkBlinkInProgress) {
-			if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
-				return;
-			if (pLed->bLedNoLinkBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedNoLinkBlinkInProgress = false;
-			}
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-			pLed->bLedLinkBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_NORMAL;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_SITE_SURVEY:
-		if ((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
-			;
-		} else if (!pLed->bLedScanBlinkInProgress) {
-			if (IS_LED_WPS_BLINKING(pLed))
-				return;
-			if (pLed->bLedNoLinkBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedNoLinkBlinkInProgress = false;
-			}
-			if (pLed->bLedLinkBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				 pLed->bLedLinkBlinkInProgress = false;
-			}
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-			pLed->bLedScanBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_SCAN;
-			pLed->BlinkTimes = 24;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		 }
-		break;
-	case LED_CTL_TX:
-	case LED_CTL_RX:
-		if (!pLed->bLedBlinkInProgress) {
-			if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
-				return;
-			if (pLed->bLedNoLinkBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedNoLinkBlinkInProgress = false;
-			}
-			if (pLed->bLedLinkBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedLinkBlinkInProgress = false;
-			}
-			pLed->bLedBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_TXRX;
-			pLed->BlinkTimes = 2;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_START_WPS: /* wait until xinpin finish */
-	case LED_CTL_START_WPS_BOTTON:
-		 if (!pLed->bLedWPSBlinkInProgress) {
-			if (pLed->bLedNoLinkBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedNoLinkBlinkInProgress = false;
-			}
-			if (pLed->bLedLinkBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				 pLed->bLedLinkBlinkInProgress = false;
-			}
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-			if (pLed->bLedScanBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedScanBlinkInProgress = false;
-			}
-			pLed->bLedWPSBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_WPS;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		 }
-		break;
-	case LED_CTL_STOP_WPS:
-		if (pLed->bLedNoLinkBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedNoLinkBlinkInProgress = false;
-		}
-		if (pLed->bLedLinkBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			 pLed->bLedLinkBlinkInProgress = false;
-		}
-		if (pLed->bLedBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedBlinkInProgress = false;
-		}
-		if (pLed->bLedScanBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedScanBlinkInProgress = false;
-		}
-		if (pLed->bLedWPSBlinkInProgress)
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-		else
-			pLed->bLedWPSBlinkInProgress = true;
-		pLed->CurrLedState = LED_BLINK_WPS_STOP;
-		if (pLed->bLedOn) {
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
-		} else {
-			pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), 0);
-		}
-		break;
-	case LED_CTL_STOP_WPS_FAIL:
-		if (pLed->bLedWPSBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedWPSBlinkInProgress = false;
-		}
-		pLed->bLedNoLinkBlinkInProgress = true;
-		pLed->CurrLedState = LED_BLINK_SLOWLY;
-		if (pLed->bLedOn)
-			pLed->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-		break;
-	case LED_CTL_POWER_OFF:
-		pLed->CurrLedState = RTW_LED_OFF;
-		pLed->BlinkingLedState = RTW_LED_OFF;
-		if (pLed->bLedNoLinkBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedNoLinkBlinkInProgress = false;
-		}
-		if (pLed->bLedLinkBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedLinkBlinkInProgress = false;
-		}
-		if (pLed->bLedBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedBlinkInProgress = false;
-		}
-		if (pLed->bLedWPSBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedWPSBlinkInProgress = false;
-		}
-		if (pLed->bLedScanBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedScanBlinkInProgress = false;
-		}
-		SwLedOff(padapter, pLed);
-		break;
-	default:
-		break;
-	}
-
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Led %d\n", pLed->CurrLedState));
-}
-
- /* Arcadyan/Sitecom , added by chiyoko, 20090216 */
-static void SwLedControlMode2(struct adapter *padapter, enum LED_CTL_MODE LedAction)
-{
-	struct led_priv *ledpriv = &(padapter->ledpriv);
-	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
-	struct LED_871x *pLed = &(ledpriv->SwLed0);
-
-	switch (LedAction) {
-	case LED_CTL_SITE_SURVEY:
-		if (pmlmepriv->LinkDetectInfo.bBusyTraffic) {
-		} else if (!pLed->bLedScanBlinkInProgress) {
-			if (IS_LED_WPS_BLINKING(pLed))
-				return;
-
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-			pLed->bLedScanBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_SCAN;
-			pLed->BlinkTimes = 24;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		 }
-		break;
-	case LED_CTL_TX:
-	case LED_CTL_RX:
-		if ((!pLed->bLedBlinkInProgress) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
-			if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
-				return;
-			pLed->bLedBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_TXRX;
-			pLed->BlinkTimes = 2;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_LINK:
-		pLed->CurrLedState = RTW_LED_ON;
-		pLed->BlinkingLedState = RTW_LED_ON;
-		if (pLed->bLedBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedBlinkInProgress = false;
-		}
-		if (pLed->bLedScanBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedScanBlinkInProgress = false;
-		}
-		_set_timer(&(pLed->BlinkTimer), 0);
-		break;
-	case LED_CTL_START_WPS: /* wait until xinpin finish */
-	case LED_CTL_START_WPS_BOTTON:
-		if (!pLed->bLedWPSBlinkInProgress) {
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-			if (pLed->bLedScanBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedScanBlinkInProgress = false;
-			}
-			pLed->bLedWPSBlinkInProgress = true;
-			pLed->CurrLedState = RTW_LED_ON;
-			pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), 0);
-		 }
-		break;
-	case LED_CTL_STOP_WPS:
-		pLed->bLedWPSBlinkInProgress = false;
-		if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-			SwLedOff(padapter, pLed);
-		} else {
-			pLed->CurrLedState = RTW_LED_ON;
-			pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), 0);
-			RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-		}
-		break;
-	case LED_CTL_STOP_WPS_FAIL:
-		pLed->bLedWPSBlinkInProgress = false;
-		if (padapter->pwrctrlpriv.rf_pwrstate != rf_on) {
-			SwLedOff(padapter, pLed);
-		} else {
-			pLed->CurrLedState = RTW_LED_OFF;
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), 0);
-			RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-		}
-		break;
-	case LED_CTL_START_TO_LINK:
-	case LED_CTL_NO_LINK:
-		if (!IS_LED_BLINKING(pLed)) {
-			pLed->CurrLedState = RTW_LED_OFF;
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), 0);
-		}
-		break;
-	case LED_CTL_POWER_OFF:
-		pLed->CurrLedState = RTW_LED_OFF;
-		pLed->BlinkingLedState = RTW_LED_OFF;
-		if (pLed->bLedBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedBlinkInProgress = false;
-		}
-		if (pLed->bLedScanBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedScanBlinkInProgress = false;
-		}
-		if (pLed->bLedWPSBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedWPSBlinkInProgress = false;
-		}
-
-		_set_timer(&(pLed->BlinkTimer), 0);
-		break;
-	default:
-		break;
-	}
-
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
-}
-
-  /* COREGA, added by chiyoko, 20090316 */
- static void SwLedControlMode3(struct adapter *padapter, enum LED_CTL_MODE LedAction)
-{
-	struct led_priv *ledpriv = &(padapter->ledpriv);
-	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
-	struct LED_871x *pLed = &(ledpriv->SwLed0);
-
-	switch (LedAction) {
-	case LED_CTL_SITE_SURVEY:
-		if (pmlmepriv->LinkDetectInfo.bBusyTraffic) {
-		} else if (!pLed->bLedScanBlinkInProgress) {
-			if (IS_LED_WPS_BLINKING(pLed))
-				return;
-
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-			pLed->bLedScanBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_SCAN;
-			pLed->BlinkTimes = 24;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_TX:
-	case LED_CTL_RX:
-		if ((!pLed->bLedBlinkInProgress) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
-			if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
-				return;
-			pLed->bLedBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_TXRX;
-			pLed->BlinkTimes = 2;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_LINK:
-		if (IS_LED_WPS_BLINKING(pLed))
-			return;
-		pLed->CurrLedState = RTW_LED_ON;
-		pLed->BlinkingLedState = RTW_LED_ON;
-		if (pLed->bLedBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedBlinkInProgress = false;
-		}
-		if (pLed->bLedScanBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedScanBlinkInProgress = false;
-		}
-
-		_set_timer(&(pLed->BlinkTimer), 0);
-		break;
-	case LED_CTL_START_WPS: /* wait until xinpin finish */
-	case LED_CTL_START_WPS_BOTTON:
-		if (!pLed->bLedWPSBlinkInProgress) {
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-			if (pLed->bLedScanBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedScanBlinkInProgress = false;
-			}
-			pLed->bLedWPSBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_WPS;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_STOP_WPS:
-		if (pLed->bLedWPSBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedWPSBlinkInProgress = false;
-		} else {
-			pLed->bLedWPSBlinkInProgress = true;
-		}
-
-		pLed->CurrLedState = LED_BLINK_WPS_STOP;
-		if (pLed->bLedOn) {
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
-		} else {
-			pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), 0);
-		}
-		break;
-	case LED_CTL_STOP_WPS_FAIL:
-		if (pLed->bLedWPSBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedWPSBlinkInProgress = false;
-		}
-		pLed->CurrLedState = RTW_LED_OFF;
-		pLed->BlinkingLedState = RTW_LED_OFF;
-		_set_timer(&(pLed->BlinkTimer), 0);
-		break;
-	case LED_CTL_START_TO_LINK:
-	case LED_CTL_NO_LINK:
-		if (!IS_LED_BLINKING(pLed)) {
-			pLed->CurrLedState = RTW_LED_OFF;
-			pLed->BlinkingLedState = RTW_LED_OFF;
-			_set_timer(&(pLed->BlinkTimer), 0);
-		}
-		break;
-	case LED_CTL_POWER_OFF:
-		pLed->CurrLedState = RTW_LED_OFF;
-		pLed->BlinkingLedState = RTW_LED_OFF;
-		if (pLed->bLedBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedBlinkInProgress = false;
-		}
-		if (pLed->bLedScanBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedScanBlinkInProgress = false;
+		} else {
+			if (pLed->bLedOn)
+				pLed->BlinkingLedState = RTW_LED_OFF;
+			else
+				pLed->BlinkingLedState = RTW_LED_ON;
+			_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
 		}
-		if (pLed->bLedWPSBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
+		break;
+	case LED_BLINK_WPS:
+		if (pLed->bLedOn)
+			pLed->BlinkingLedState = RTW_LED_OFF;
+		else
+			pLed->BlinkingLedState = RTW_LED_ON;
+		_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
+		break;
+	case LED_BLINK_WPS_STOP:	/* WPS success */
+		if (pLed->BlinkingLedState == RTW_LED_ON)
+			bStopBlinking = false;
+		else
+			bStopBlinking = true;
+
+		if (bStopBlinking) {
+			pLed->bLedLinkBlinkInProgress = true;
+			pLed->CurrLedState = LED_BLINK_NORMAL;
+			if (pLed->bLedOn)
+				pLed->BlinkingLedState = RTW_LED_OFF;
+			else
+				pLed->BlinkingLedState = RTW_LED_ON;
+			_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
+			RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("CurrLedState %d\n", pLed->CurrLedState));
+
 			pLed->bLedWPSBlinkInProgress = false;
+		} else {
+			pLed->BlinkingLedState = RTW_LED_OFF;
+			_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
 		}
-
-		_set_timer(&(pLed->BlinkTimer), 0);
 		break;
 	default:
 		break;
 	}
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_,
-		 ("CurrLedState %d\n", pLed->CurrLedState));
 }
 
- /* Edimax-Belkin, added by chiyoko, 20090413 */
-static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAction)
+ /* ALPHA, added by chiyoko, 20090106 */
+static void SwLedControlMode1(struct adapter *padapter, enum LED_CTL_MODE LedAction)
 {
 	struct led_priv *ledpriv = &(padapter->ledpriv);
-	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct LED_871x *pLed = &(ledpriv->SwLed0);
-	struct LED_871x *pLed1 = &(ledpriv->SwLed1);
+	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
 
 	switch (LedAction) {
+	case LED_CTL_POWER_ON:
 	case LED_CTL_START_TO_LINK:
-		if (pLed1->bLedWPSBlinkInProgress) {
-			pLed1->bLedWPSBlinkInProgress = false;
-			_cancel_timer_ex(&(pLed1->BlinkTimer));
-
-			pLed1->BlinkingLedState = RTW_LED_OFF;
-			pLed1->CurrLedState = RTW_LED_OFF;
-
-			if (pLed1->bLedOn)
-				_set_timer(&(pLed->BlinkTimer), 0);
-		}
-
-		if (!pLed->bLedStartToLinkBlinkInProgress) {
+	case LED_CTL_NO_LINK:
+		if (!pLed->bLedNoLinkBlinkInProgress) {
 			if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
 				return;
-			if (pLed->bLedBlinkInProgress) {
+			if (pLed->bLedLinkBlinkInProgress) {
 				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
+				pLed->bLedLinkBlinkInProgress = false;
 			}
-			if (pLed->bLedNoLinkBlinkInProgress) {
+			if (pLed->bLedBlinkInProgress) {
 				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedNoLinkBlinkInProgress = false;
+				pLed->bLedBlinkInProgress = false;
 			}
 
-			pLed->bLedStartToLinkBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_StartToBlink;
-			if (pLed->bLedOn) {
+			pLed->bLedNoLinkBlinkInProgress = true;
+			pLed->CurrLedState = LED_BLINK_SLOWLY;
+			if (pLed->bLedOn)
 				pLed->BlinkingLedState = RTW_LED_OFF;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
-			} else {
+			else
 				pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
-			}
+			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
 		}
 		break;
 	case LED_CTL_LINK:
-	case LED_CTL_NO_LINK:
-		/* LED1 settings */
-		if (LedAction == LED_CTL_LINK) {
-			if (pLed1->bLedWPSBlinkInProgress) {
-				pLed1->bLedWPSBlinkInProgress = false;
-				_cancel_timer_ex(&(pLed1->BlinkTimer));
-
-				pLed1->BlinkingLedState = RTW_LED_OFF;
-				pLed1->CurrLedState = RTW_LED_OFF;
-
-				if (pLed1->bLedOn)
-					_set_timer(&(pLed->BlinkTimer), 0);
-			}
-		}
-
-		if (!pLed->bLedNoLinkBlinkInProgress) {
+		if (!pLed->bLedLinkBlinkInProgress) {
 			if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
 				return;
+			if (pLed->bLedNoLinkBlinkInProgress) {
+				_cancel_timer_ex(&(pLed->BlinkTimer));
+				pLed->bLedNoLinkBlinkInProgress = false;
+			}
 			if (pLed->bLedBlinkInProgress) {
 				_cancel_timer_ex(&(pLed->BlinkTimer));
 				pLed->bLedBlinkInProgress = false;
 			}
-
-			pLed->bLedNoLinkBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_SLOWLY;
+			pLed->bLedLinkBlinkInProgress = true;
+			pLed->CurrLedState = LED_BLINK_NORMAL;
 			if (pLed->bLedOn)
 				pLed->BlinkingLedState = RTW_LED_OFF;
 			else
 				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
+			_set_timer(&(pLed->BlinkTimer), LED_BLINK_LINK_INTERVAL_ALPHA);
 		}
 		break;
 	case LED_CTL_SITE_SURVEY:
 		if ((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
+			;
 		} else if (!pLed->bLedScanBlinkInProgress) {
 			if (IS_LED_WPS_BLINKING(pLed))
 				return;
-
 			if (pLed->bLedNoLinkBlinkInProgress) {
 				_cancel_timer_ex(&(pLed->BlinkTimer));
 				pLed->bLedNoLinkBlinkInProgress = false;
 			}
+			if (pLed->bLedLinkBlinkInProgress) {
+				_cancel_timer_ex(&(pLed->BlinkTimer));
+				 pLed->bLedLinkBlinkInProgress = false;
+			}
 			if (pLed->bLedBlinkInProgress) {
 				_cancel_timer_ex(&(pLed->BlinkTimer));
 				pLed->bLedBlinkInProgress = false;
@@ -1334,7 +316,7 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
 			else
 				pLed->BlinkingLedState = RTW_LED_ON;
 			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		}
+		 }
 		break;
 	case LED_CTL_TX:
 	case LED_CTL_RX:
@@ -1345,6 +327,10 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
 				_cancel_timer_ex(&(pLed->BlinkTimer));
 				pLed->bLedNoLinkBlinkInProgress = false;
 			}
+			if (pLed->bLedLinkBlinkInProgress) {
+				_cancel_timer_ex(&(pLed->BlinkTimer));
+				pLed->bLedLinkBlinkInProgress = false;
+			}
 			pLed->bLedBlinkInProgress = true;
 			pLed->CurrLedState = LED_BLINK_TXRX;
 			pLed->BlinkTimes = 2;
@@ -1357,22 +343,15 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
 		break;
 	case LED_CTL_START_WPS: /* wait until xinpin finish */
 	case LED_CTL_START_WPS_BOTTON:
-		if (pLed1->bLedWPSBlinkInProgress) {
-			pLed1->bLedWPSBlinkInProgress = false;
-			_cancel_timer_ex(&(pLed1->BlinkTimer));
-
-			pLed1->BlinkingLedState = RTW_LED_OFF;
-			pLed1->CurrLedState = RTW_LED_OFF;
-
-			if (pLed1->bLedOn)
-				_set_timer(&(pLed->BlinkTimer), 0);
-		}
-
-		if (!pLed->bLedWPSBlinkInProgress) {
+		 if (!pLed->bLedWPSBlinkInProgress) {
 			if (pLed->bLedNoLinkBlinkInProgress) {
 				_cancel_timer_ex(&(pLed->BlinkTimer));
 				pLed->bLedNoLinkBlinkInProgress = false;
 			}
+			if (pLed->bLedLinkBlinkInProgress) {
+				_cancel_timer_ex(&(pLed->BlinkTimer));
+				 pLed->bLedLinkBlinkInProgress = false;
+			}
 			if (pLed->bLedBlinkInProgress) {
 				_cancel_timer_ex(&(pLed->BlinkTimer));
 				pLed->bLedBlinkInProgress = false;
@@ -1383,56 +362,44 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
 			}
 			pLed->bLedWPSBlinkInProgress = true;
 			pLed->CurrLedState = LED_BLINK_WPS;
-			if (pLed->bLedOn) {
+			if (pLed->bLedOn)
 				pLed->BlinkingLedState = RTW_LED_OFF;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
-			} else {
+			else
 				pLed->BlinkingLedState = RTW_LED_ON;
-				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
-			}
-		}
+			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
+		 }
 		break;
-	case LED_CTL_STOP_WPS:	/* WPS connect success */
-		if (pLed->bLedWPSBlinkInProgress) {
+	case LED_CTL_STOP_WPS:
+		if (pLed->bLedNoLinkBlinkInProgress) {
 			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedWPSBlinkInProgress = false;
+			pLed->bLedNoLinkBlinkInProgress = false;
 		}
-
-		pLed->bLedNoLinkBlinkInProgress = true;
-		pLed->CurrLedState = LED_BLINK_SLOWLY;
-		if (pLed->bLedOn)
-			pLed->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-
-		break;
-	case LED_CTL_STOP_WPS_FAIL:		/* WPS authentication fail */
-		if (pLed->bLedWPSBlinkInProgress) {
+		if (pLed->bLedLinkBlinkInProgress) {
 			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedWPSBlinkInProgress = false;
+			 pLed->bLedLinkBlinkInProgress = false;
 		}
-		pLed->bLedNoLinkBlinkInProgress = true;
-		pLed->CurrLedState = LED_BLINK_SLOWLY;
-		if (pLed->bLedOn)
-			pLed->BlinkingLedState = RTW_LED_OFF;
+		if (pLed->bLedBlinkInProgress) {
+			_cancel_timer_ex(&(pLed->BlinkTimer));
+			pLed->bLedBlinkInProgress = false;
+		}
+		if (pLed->bLedScanBlinkInProgress) {
+			_cancel_timer_ex(&(pLed->BlinkTimer));
+			pLed->bLedScanBlinkInProgress = false;
+		}
+		if (pLed->bLedWPSBlinkInProgress)
+			_cancel_timer_ex(&(pLed->BlinkTimer));
 		else
+			pLed->bLedWPSBlinkInProgress = true;
+		pLed->CurrLedState = LED_BLINK_WPS_STOP;
+		if (pLed->bLedOn) {
+			pLed->BlinkingLedState = RTW_LED_OFF;
+			_set_timer(&(pLed->BlinkTimer), LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA);
+		} else {
 			pLed->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-
-		/* LED1 settings */
-		if (pLed1->bLedWPSBlinkInProgress)
-			_cancel_timer_ex(&(pLed1->BlinkTimer));
-		else
-			pLed1->bLedWPSBlinkInProgress = true;
-		pLed1->CurrLedState = LED_BLINK_WPS_STOP;
-		if (pLed1->bLedOn)
-			pLed1->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed1->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
+			_set_timer(&(pLed->BlinkTimer), 0);
+		}
 		break;
-	case LED_CTL_STOP_WPS_FAIL_OVERLAP:	/* WPS session overlap */
+	case LED_CTL_STOP_WPS_FAIL:
 		if (pLed->bLedWPSBlinkInProgress) {
 			_cancel_timer_ex(&(pLed->BlinkTimer));
 			pLed->bLedWPSBlinkInProgress = false;
@@ -1444,24 +411,10 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
 		else
 			pLed->BlinkingLedState = RTW_LED_ON;
 		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
-
-		/* LED1 settings */
-		if (pLed1->bLedWPSBlinkInProgress)
-			_cancel_timer_ex(&(pLed1->BlinkTimer));
-		else
-			pLed1->bLedWPSBlinkInProgress = true;
-		pLed1->CurrLedState = LED_BLINK_WPS_STOP_OVERLAP;
-		pLed1->BlinkTimes = 10;
-		if (pLed1->bLedOn)
-			pLed1->BlinkingLedState = RTW_LED_OFF;
-		else
-			pLed1->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
 		break;
 	case LED_CTL_POWER_OFF:
 		pLed->CurrLedState = RTW_LED_OFF;
 		pLed->BlinkingLedState = RTW_LED_OFF;
-
 		if (pLed->bLedNoLinkBlinkInProgress) {
 			_cancel_timer_ex(&(pLed->BlinkTimer));
 			pLed->bLedNoLinkBlinkInProgress = false;
@@ -1482,87 +435,6 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
 			_cancel_timer_ex(&(pLed->BlinkTimer));
 			pLed->bLedScanBlinkInProgress = false;
 		}
-		if (pLed->bLedStartToLinkBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedStartToLinkBlinkInProgress = false;
-		}
-		if (pLed1->bLedWPSBlinkInProgress) {
-			_cancel_timer_ex(&(pLed1->BlinkTimer));
-			pLed1->bLedWPSBlinkInProgress = false;
-		}
-		pLed1->BlinkingLedState = LED_UNKNOWN;
-		SwLedOff(padapter, pLed);
-		SwLedOff(padapter, pLed1);
-		break;
-	default:
-		break;
-	}
-
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Led %d\n", pLed->CurrLedState));
-}
-
-
-
- /* Sercomm-Belkin, added by chiyoko, 20090415 */
-static void
-SwLedControlMode5(
-	struct adapter *padapter,
-	enum LED_CTL_MODE LedAction
-)
-{
-	struct led_priv *ledpriv = &(padapter->ledpriv);
-	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
-	struct LED_871x *pLed = &(ledpriv->SwLed0);
-
-	switch (LedAction) {
-	case LED_CTL_POWER_ON:
-	case LED_CTL_NO_LINK:
-	case LED_CTL_LINK:	/* solid blue */
-		pLed->CurrLedState = RTW_LED_ON;
-		pLed->BlinkingLedState = RTW_LED_ON;
-
-		_set_timer(&(pLed->BlinkTimer), 0);
-		break;
-	case LED_CTL_SITE_SURVEY:
-		if ((pmlmepriv->LinkDetectInfo.bBusyTraffic) && (check_fwstate(pmlmepriv, _FW_LINKED))) {
-		} else if (!pLed->bLedScanBlinkInProgress) {
-			if (pLed->bLedBlinkInProgress) {
-				_cancel_timer_ex(&(pLed->BlinkTimer));
-				pLed->bLedBlinkInProgress = false;
-			}
-			pLed->bLedScanBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_SCAN;
-			pLed->BlinkTimes = 24;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_TX:
-	case LED_CTL_RX:
-		if (!pLed->bLedBlinkInProgress) {
-			if (pLed->CurrLedState == LED_BLINK_SCAN)
-				return;
-			pLed->bLedBlinkInProgress = true;
-			pLed->CurrLedState = LED_BLINK_TXRX;
-			pLed->BlinkTimes = 2;
-			if (pLed->bLedOn)
-				pLed->BlinkingLedState = RTW_LED_OFF;
-			else
-				pLed->BlinkingLedState = RTW_LED_ON;
-			_set_timer(&(pLed->BlinkTimer), LED_BLINK_FASTER_INTERVAL_ALPHA);
-		}
-		break;
-	case LED_CTL_POWER_OFF:
-		pLed->CurrLedState = RTW_LED_OFF;
-		pLed->BlinkingLedState = RTW_LED_OFF;
-
-		if (pLed->bLedBlinkInProgress) {
-			_cancel_timer_ex(&(pLed->BlinkTimer));
-			pLed->bLedBlinkInProgress = false;
-		}
 		SwLedOff(padapter, pLed);
 		break;
 	default:
@@ -1572,73 +444,18 @@ SwLedControlMode5(
 	RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("Led %d\n", pLed->CurrLedState));
 }
 
- /* WNC-Corega, added by chiyoko, 20090902 */
-static void
-SwLedControlMode6(
-	struct adapter *padapter,
-	enum LED_CTL_MODE LedAction
-)
-{
-	struct led_priv *ledpriv = &(padapter->ledpriv);
-	struct LED_871x *pLed0 = &(ledpriv->SwLed0);
-
-	switch (LedAction) {
-	case LED_CTL_POWER_ON:
-	case LED_CTL_LINK:
-	case LED_CTL_NO_LINK:
-		_cancel_timer_ex(&(pLed0->BlinkTimer));
-		pLed0->CurrLedState = RTW_LED_ON;
-		pLed0->BlinkingLedState = RTW_LED_ON;
-		_set_timer(&(pLed0->BlinkTimer), 0);
-		break;
-	case LED_CTL_POWER_OFF:
-		SwLedOff(padapter, pLed0);
-		break;
-	default:
-		break;
-	}
-
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_, ("ledcontrol 6 Led %d\n", pLed0->CurrLedState));
-}
-
 /*  */
 /*	Description: */
 /*		Handler function of LED Blinking. */
-/*		We dispatch acture LED blink action according to LedStrategy. */
 /*  */
 void BlinkHandler(struct LED_871x *pLed)
 {
 	struct adapter *padapter = pLed->padapter;
-	struct led_priv *ledpriv = &(padapter->ledpriv);
 
 	if ((padapter->bSurpriseRemoved) || (padapter->bDriverStopped))
 		return;
 
-	switch (ledpriv->LedStrategy) {
-	case SW_LED_MODE0:
-		SwLedBlink(pLed);
-		break;
-	case SW_LED_MODE1:
-		SwLedBlink1(pLed);
-		break;
-	case SW_LED_MODE2:
-		SwLedBlink2(pLed);
-		break;
-	case SW_LED_MODE3:
-		SwLedBlink3(pLed);
-		break;
-	case SW_LED_MODE4:
-		SwLedBlink4(pLed);
-		break;
-	case SW_LED_MODE5:
-		SwLedBlink5(pLed);
-		break;
-	case SW_LED_MODE6:
-		SwLedBlink6(pLed);
-		break;
-	default:
-		break;
-	}
+	SwLedBlink1(pLed);
 }
 
 void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE LedAction)
@@ -1661,32 +478,5 @@ void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE LedAction)
 	     LedAction == LED_CTL_POWER_ON))
 		return;
 
-	switch (ledpriv->LedStrategy) {
-	case SW_LED_MODE0:
-		break;
-	case SW_LED_MODE1:
-		SwLedControlMode1(padapter, LedAction);
-		break;
-	case SW_LED_MODE2:
-		SwLedControlMode2(padapter, LedAction);
-		break;
-	case SW_LED_MODE3:
-		SwLedControlMode3(padapter, LedAction);
-		break;
-	case SW_LED_MODE4:
-		SwLedControlMode4(padapter, LedAction);
-		break;
-	case SW_LED_MODE5:
-		SwLedControlMode5(padapter, LedAction);
-		break;
-	case SW_LED_MODE6:
-		SwLedControlMode6(padapter, LedAction);
-		break;
-	default:
-		break;
-	}
-
-	RT_TRACE(_module_rtl8712_led_c_, _drv_info_,
-		 ("LedStrategy:%d, LedAction %d\n",
-		 ledpriv->LedStrategy, LedAction));
+	SwLedControlMode1(padapter, LedAction);
 }
-- 
1.7.10.4

[PATCH 06/10] staging: rtl8188eu: Remove enum LED_STRATEGY_871x .

[navin patidar]

 Now driver has only one type of led blinking strategy, so we don't
 need enum LED_STRATEGY_871x variable to store led blinking strategy
 type.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/hal/rtl8188eu_led.c |    1 -
 drivers/staging/rtl8188eu/include/rtw_led.h   |   18 ------------------
 2 files changed, 19 deletions(-)

diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
index 01eeb70..e3c86f7 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
@@ -95,7 +95,6 @@ void rtl8188eu_InitSwLeds(struct adapter *padapter)
 	struct hal_data_8188e   *haldata = GET_HAL_DATA(padapter);
 
 	pledpriv->bRegUseLed = true;
-	pledpriv->LedStrategy = SW_LED_MODE1;
 	pledpriv->LedControlHandler = LedControl8188eu;
 	haldata->bLedOpenDrain = true;
 
diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h
index 0da4e27..690c82a 100644
--- a/drivers/staging/rtl8188eu/include/rtw_led.h
+++ b/drivers/staging/rtl8188eu/include/rtw_led.h
@@ -143,30 +143,12 @@ struct LED_871x {
 	(((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress	||	\
 	((struct LED_871x *)_LED_871x)->bLedScanBlinkInProgress)
 
-/*  LED customization. */
-
-enum LED_STRATEGY_871x {
-	SW_LED_MODE0 = 0, /* SW control 1 LED via GPIO0. It is default option.*/
-	SW_LED_MODE1 = 1, /*  2 LEDs, through LED0 and LED1. For ALPHA. */
-	SW_LED_MODE2 = 2, /*  SW control 1 LED via GPIO0, customized for AzWave
-			   * 8187 minicard. */
-	SW_LED_MODE3 = 3, /*  SW control 1 LED via GPIO0, customized for Sercomm
-			   * Printer Server case. */
-	SW_LED_MODE4 = 4, /* for Edimax / Belkin */
-	SW_LED_MODE5 = 5, /* for Sercomm / Belkin */
-	SW_LED_MODE6 = 6, /* for 88CU minicard, porting from ce SW_LED_MODE7 */
-	HW_LED = 50, /*  HW control 2 LEDs, LED0 and LED1 (there are 4
-		      * different control modes, see MAC.CONFIG1 for details.)*/
-	LED_ST_NONE = 99,
-};
-
 void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE	LedAction);
 
 struct led_priv{
 	/* add for led control */
 	struct LED_871x			SwLed0;
 	struct LED_871x			SwLed1;
-	enum LED_STRATEGY_871x	LedStrategy;
 	u8	bRegUseLed;
 	void (*LedControlHandler)(struct adapter *padapter,
 				  enum LED_CTL_MODE LedAction);
-- 
1.7.10.4

[PATCH 07/10] staging: rtl8188eu: refactor led related structures.

[navin patidar]

struct led_priv contains two variables SwLed0 and SwLed1 but only
SwLed0 is being used by SwLedControlModel1() function.

SwLedControlModel1() function performs led operations.

This patch removes SwLed1 and code which uses SwLed1.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/core/rtw_led.c      |    3 +-
 drivers/staging/rtl8188eu/hal/rtl8188eu_led.c |   40 ++++++-------------------
 drivers/staging/rtl8188eu/include/rtw_led.h   |   14 +--------
 3 files changed, 11 insertions(+), 46 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_led.c b/drivers/staging/rtl8188eu/core/rtw_led.c
index c42e176..87d6f06 100644
--- a/drivers/staging/rtl8188eu/core/rtw_led.c
+++ b/drivers/staging/rtl8188eu/core/rtw_led.c
@@ -70,10 +70,9 @@ void ResetLedStatus(struct LED_871x *pLed)
 
 /*Description: */
 /*		Initialize an LED_871x object. */
-void InitLed871x(struct adapter *padapter, struct LED_871x *pLed, enum LED_PIN_871x LedPin)
+void InitLed871x(struct adapter *padapter, struct LED_871x *pLed)
 {
 	pLed->padapter = padapter;
-	pLed->LedPin = LedPin;
 
 	ResetLedStatus(pLed);
 
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
index e3c86f7..77dce58 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_led.c
@@ -35,16 +35,7 @@ void SwLedOn(struct adapter *padapter, struct LED_871x *pLed)
 	if (padapter->bSurpriseRemoved || padapter->bDriverStopped)
 		return;
 	LedCfg = rtw_read8(padapter, REG_LEDCFG2);
-	switch (pLed->LedPin) {
-	case LED_PIN_LED0:
-		rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); /*  SW control led0 on. */
-		break;
-	case LED_PIN_LED1:
-		rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x0f)|BIT5); /*  SW control led1 on. */
-		break;
-	default:
-		break;
-	}
+	rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); /*  SW control led0 on. */
 	pLed->bLedOn = true;
 }
 
@@ -60,25 +51,15 @@ void SwLedOff(struct adapter *padapter, struct LED_871x *pLed)
 
 	LedCfg = rtw_read8(padapter, REG_LEDCFG2);/* 0x4E */
 
-	switch (pLed->LedPin) {
-	case LED_PIN_LED0:
-		if (pHalData->bLedOpenDrain) {
+	if (pHalData->bLedOpenDrain) {
 			/*  Open-drain arrangement for controlling the LED) */
-			LedCfg &= 0x90; /*  Set to software control. */
-			rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));
-			LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG);
-			LedCfg &= 0xFE;
-			rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg);
-		} else {
-			rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT5|BIT6));
-		}
-		break;
-	case LED_PIN_LED1:
-		LedCfg &= 0x0f; /*  Set to software control. */
+		LedCfg &= 0x90; /*  Set to software control. */
 		rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));
-		break;
-	default:
-		break;
+		LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG);
+		LedCfg &= 0xFE;
+		rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg);
+	} else {
+		rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT5|BIT6));
 	}
 exit:
 	pLed->bLedOn = false;
@@ -98,9 +79,7 @@ void rtl8188eu_InitSwLeds(struct adapter *padapter)
 	pledpriv->LedControlHandler = LedControl8188eu;
 	haldata->bLedOpenDrain = true;
 
-	InitLed871x(padapter, &(pledpriv->SwLed0), LED_PIN_LED0);
-
-	InitLed871x(padapter, &(pledpriv->SwLed1), LED_PIN_LED1);
+	InitLed871x(padapter, &(pledpriv->SwLed0));
 }
 
 /*	Description: */
@@ -110,5 +89,4 @@ void rtl8188eu_DeInitSwLeds(struct adapter *padapter)
 	struct led_priv	*ledpriv = &(padapter->ledpriv);
 
 	DeInitLed871x(&(ledpriv->SwLed0));
-	DeInitLed871x(&(ledpriv->SwLed1));
 }
diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h
index 690c82a..ed1c687 100644
--- a/drivers/staging/rtl8188eu/include/rtw_led.h
+++ b/drivers/staging/rtl8188eu/include/rtw_led.h
@@ -96,19 +96,9 @@ enum LED_STATE_871x {
 	LED_BLINK_ALWAYS_ON = 16,
 };
 
-enum LED_PIN_871x {
-	LED_PIN_NULL = 0,
-	LED_PIN_LED0 = 1,
-	LED_PIN_LED1 = 2,
-	LED_PIN_LED2 = 3,
-	LED_PIN_GPIO0 = 4,
-};
-
 struct LED_871x {
 	struct adapter *padapter;
 
-	enum LED_PIN_871x	LedPin;	/* Identify how to implement this
-					 * SW led. */
 	enum LED_STATE_871x	CurrLedState; /*  Current LED state. */
 	enum LED_STATE_871x	BlinkingLedState; /*  Next state for blinking,
 				   * either RTW_LED_ON or RTW_LED_OFF are. */
@@ -148,7 +138,6 @@ void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE	LedAction);
 struct led_priv{
 	/* add for led control */
 	struct LED_871x			SwLed0;
-	struct LED_871x			SwLed1;
 	u8	bRegUseLed;
 	void (*LedControlHandler)(struct adapter *padapter,
 				  enum LED_CTL_MODE LedAction);
@@ -166,8 +155,7 @@ void BlinkWorkItemCallback(struct work_struct *work);
 
 void ResetLedStatus(struct LED_871x *pLed);
 
-void InitLed871x(struct adapter *padapter, struct LED_871x *pLed,
-		 enum LED_PIN_871x LedPin);
+void InitLed871x(struct adapter *padapter, struct LED_871x *pLed);
 
 void DeInitLed871x(struct LED_871x *pLed);
 
-- 
1.7.10.4

[PATCH 08/10] staging: rtl8188eu: Remove unused macros.

[navin patidar]

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/include/rtw_led.h |   31 ---------------------------
 1 file changed, 31 deletions(-)

diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h
index ed1c687..2f81fab 100644
--- a/drivers/staging/rtl8188eu/include/rtw_led.h
+++ b/drivers/staging/rtl8188eu/include/rtw_led.h
@@ -23,39 +23,12 @@
 #include <osdep_service.h>
 #include <drv_types.h>
 
-#define MSECS(t)        (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
-
-#define LED_BLINK_NORMAL_INTERVAL		100
-#define LED_BLINK_SLOWLY_INTERVAL		200
-#define LED_BLINK_LONG_INTERVAL			400
-
 #define LED_BLINK_NO_LINK_INTERVAL_ALPHA	1000
 #define LED_BLINK_LINK_INTERVAL_ALPHA		500	/* 500 */
 #define LED_BLINK_SCAN_INTERVAL_ALPHA		180	/* 150 */
 #define LED_BLINK_FASTER_INTERVAL_ALPHA		50
 #define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA	5000
 
-#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX	100
-#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX	2000
-
-#define LED_BLINK_SLOWLY_INTERVAL_PORNET	1000
-#define LED_BLINK_NORMAL_INTERVAL_PORNET	100
-
-#define LED_BLINK_FAST_INTERVAL_BITLAND		30
-
-/*  060403, rcnjko: Customized for AzWave. */
-#define LED_CM2_BLINK_ON_INTERVAL		250
-#define LED_CM2_BLINK_OFF_INTERVAL		4750
-
-#define LED_CM8_BLINK_INTERVAL			500	/* for QMI */
-#define LED_CM8_BLINK_OFF_INTERVAL		3750	/* for QMI */
-
-/*  080124, lanhsin: Customized for RunTop */
-#define LED_RunTop_BLINK_INTERVAL		300
-
-/*  060421, rcnjko: Customized for Sercomm Printer Server case. */
-#define LED_CM3_BLINK_INTERVAL			1500
-
 enum LED_CTL_MODE {
 	LED_CTL_POWER_ON = 1,
 	LED_CTL_LINK = 2,
@@ -129,10 +102,6 @@ struct LED_871x {
 	((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS_STOP || \
 	((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress)
 
-#define IS_LED_BLINKING(_LED_871x)					\
-	(((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress	||	\
-	((struct LED_871x *)_LED_871x)->bLedScanBlinkInProgress)
-
 void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE	LedAction);
 
 struct led_priv{
-- 
1.7.10.4

[PATCH 09/10] staging: rtl8188eu: Remove unused enum LED_STATE_871x members.

[navin patidar]

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/include/rtw_led.h |   30 +++++++++------------------
 1 file changed, 10 insertions(+), 20 deletions(-)

diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h
index 2f81fab..2ad7e4a 100644
--- a/drivers/staging/rtl8188eu/include/rtw_led.h
+++ b/drivers/staging/rtl8188eu/include/rtw_led.h
@@ -47,26 +47,16 @@ enum LED_CTL_MODE {
 };
 
 enum LED_STATE_871x {
-	LED_UNKNOWN = 0,
-	RTW_LED_ON = 1,
-	RTW_LED_OFF = 2,
-	LED_BLINK_NORMAL = 3,
-	LED_BLINK_SLOWLY = 4,
-	LED_BLINK_POWER_ON = 5,
-	LED_BLINK_SCAN = 6, /*  LED is blinking during scanning period,
-			     * the # of times to blink is depend on time
-			     * for scanning. */
-	LED_BLINK_NO_LINK = 7, /*  LED is blinking during no link state. */
-	LED_BLINK_StartToBlink = 8,/*  Customzied for Sercomm Printer
-				    * Server case */
-	LED_BLINK_TXRX = 9,
-	LED_BLINK_WPS = 10,	/*  LED is blinkg during WPS communication */
-	LED_BLINK_WPS_STOP = 11,	/* for ALPHA */
-	LED_BLINK_WPS_STOP_OVERLAP = 12,	/* for BELKIN */
-	LED_BLINK_RUNTOP = 13, /*  Customized for RunTop */
-	LED_BLINK_CAMEO = 14,
-	LED_BLINK_XAVI = 15,
-	LED_BLINK_ALWAYS_ON = 16,
+	LED_UNKNOWN,
+	RTW_LED_ON,
+	RTW_LED_OFF,
+	LED_BLINK_NORMAL,
+	LED_BLINK_SLOWLY,
+	LED_BLINK_POWER_ON,
+	LED_BLINK_SCAN,
+	LED_BLINK_TXRX,
+	LED_BLINK_WPS,
+	LED_BLINK_WPS_STOP
 };
 
 struct LED_871x {
-- 
1.7.10.4

[PATCH 10/10] staging: rtl8188eu: Remove unused enum LED_CTL_MODE members.

[navin patidar]

Signed-off-by: navin patidar <navin.patidar@gmail.com>
---
 drivers/staging/rtl8188eu/include/rtw_led.h |   26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h
index 2ad7e4a..c5194b6 100644
--- a/drivers/staging/rtl8188eu/include/rtw_led.h
+++ b/drivers/staging/rtl8188eu/include/rtw_led.h
@@ -30,20 +30,18 @@
 #define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA	5000
 
 enum LED_CTL_MODE {
-	LED_CTL_POWER_ON = 1,
-	LED_CTL_LINK = 2,
-	LED_CTL_NO_LINK = 3,
-	LED_CTL_TX = 4,
-	LED_CTL_RX = 5,
-	LED_CTL_SITE_SURVEY = 6,
-	LED_CTL_POWER_OFF = 7,
-	LED_CTL_START_TO_LINK = 8,
-	LED_CTL_START_WPS = 9,
-	LED_CTL_STOP_WPS = 10,
-	LED_CTL_START_WPS_BOTTON = 11, /* added for runtop */
-	LED_CTL_STOP_WPS_FAIL = 12, /* added for ALPHA */
-	LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, /* added for BELKIN */
-	LED_CTL_CONNECTION_NO_TRANSFER = 14,
+	LED_CTL_POWER_ON,
+	LED_CTL_LINK,
+	LED_CTL_NO_LINK,
+	LED_CTL_TX,
+	LED_CTL_RX ,
+	LED_CTL_SITE_SURVEY,
+	LED_CTL_POWER_OFF,
+	LED_CTL_START_TO_LINK,
+	LED_CTL_START_WPS,
+	LED_CTL_STOP_WPS,
+	LED_CTL_START_WPS_BOTTON,
+	LED_CTL_STOP_WPS_FAIL
 };
 
 enum LED_STATE_871x {
-- 
1.7.10.4

Re: [PATCH 03/10] staging: rtl8188eu: Remove _ReadLEDSetting() function.

[Dan Carpenter]

On Sun, Apr 20, 2014 at 02:17:11PM +0530, navin patidar wrote:
> _ReadLEDSetting() doesn't read led settings this function actually
> initialize  member variables of struct led_priv, we should do that
> inside rtl8188eu_InitSwLeds().
> 

This seems like a bugfix or is it just a cleanup?  It's not clear to me
from the patch description.  Have you tested this patch?

regards,
dan carpenter

Re: [PATCH 05/10] staging: rtl8188eu: Simplify led blinking strategy code.

[Dan Carpenter]

Minor white space complaints.

On Sun, Apr 20, 2014 at 02:17:13PM +0530, navin patidar wrote:
> @@ -1334,7 +316,7 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
>  			else
>  				pLed->BlinkingLedState = RTW_LED_ON;
>  			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
> -		}
> +		 }
>  		break;
>  	case LED_CTL_TX:
>  	case LED_CTL_RX:
> @@ -1345,6 +327,10 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct

A stray space character was accidentally added here.  You can fix minor
things like that in a later patch.

>  				_cancel_timer_ex(&(pLed->BlinkTimer));
>  				pLed->bLedNoLinkBlinkInProgress = false;
>  			}
> +			if (pLed->bLedLinkBlinkInProgress) {
> +				_cancel_timer_ex(&(pLed->BlinkTimer));
> +				pLed->bLedLinkBlinkInProgress = false;
> +			}
>  			pLed->bLedBlinkInProgress = true;
>  			pLed->CurrLedState = LED_BLINK_TXRX;
>  			pLed->BlinkTimes = 2;
> @@ -1357,22 +343,15 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
>  		break;
>  	case LED_CTL_START_WPS: /* wait until xinpin finish */
>  	case LED_CTL_START_WPS_BOTTON:
> -		if (pLed1->bLedWPSBlinkInProgress) {
> -			pLed1->bLedWPSBlinkInProgress = false;
> -			_cancel_timer_ex(&(pLed1->BlinkTimer));
> -
> -			pLed1->BlinkingLedState = RTW_LED_OFF;
> -			pLed1->CurrLedState = RTW_LED_OFF;
> -
> -			if (pLed1->bLedOn)
> -				_set_timer(&(pLed->BlinkTimer), 0);
> -		}
> -
> -		if (!pLed->bLedWPSBlinkInProgress) {
> +		 if (!pLed->bLedWPSBlinkInProgress) {

And another here.

>  			if (pLed->bLedNoLinkBlinkInProgress) {
>  				_cancel_timer_ex(&(pLed->BlinkTimer));
>  				pLed->bLedNoLinkBlinkInProgress = false;
>  			}
> +			if (pLed->bLedLinkBlinkInProgress) {
> +				_cancel_timer_ex(&(pLed->BlinkTimer));
> +				 pLed->bLedLinkBlinkInProgress = false;
> +			}
>  			if (pLed->bLedBlinkInProgress) {
>  				_cancel_timer_ex(&(pLed->BlinkTimer));
>  				pLed->bLedBlinkInProgress = false;
> @@ -1383,56 +362,44 @@ static void SwLedControlMode4(struct adapter *padapter, enum LED_CTL_MODE LedAct
>  			}
>  			pLed->bLedWPSBlinkInProgress = true;
>  			pLed->CurrLedState = LED_BLINK_WPS;
> -			if (pLed->bLedOn) {
> +			if (pLed->bLedOn)
>  				pLed->BlinkingLedState = RTW_LED_OFF;
> -				_set_timer(&(pLed->BlinkTimer), LED_BLINK_SLOWLY_INTERVAL);
> -			} else {
> +			else
>  				pLed->BlinkingLedState = RTW_LED_ON;
> -				_set_timer(&(pLed->BlinkTimer), LED_BLINK_NORMAL_INTERVAL);
> -			}
> -		}
> +			_set_timer(&(pLed->BlinkTimer), LED_BLINK_SCAN_INTERVAL_ALPHA);
> +		 }
>  		break;
> -	case LED_CTL_STOP_WPS:	/* WPS connect success */
> -		if (pLed->bLedWPSBlinkInProgress) {
> +	case LED_CTL_STOP_WPS:
> +		if (pLed->bLedNoLinkBlinkInProgress) {
>  			_cancel_timer_ex(&(pLed->BlinkTimer));
> -			pLed->bLedWPSBlinkInProgress = false;
> +			pLed->bLedNoLinkBlinkInProgress = false;
>  		}
> -
> -		pLed->bLedNoLinkBlinkInProgress = true;
> -		pLed->CurrLedState = LED_BLINK_SLOWLY;
> -		if (pLed->bLedOn)
> -			pLed->BlinkingLedState = RTW_LED_OFF;
> -		else
> -			pLed->BlinkingLedState = RTW_LED_ON;
> -		_set_timer(&(pLed->BlinkTimer), LED_BLINK_NO_LINK_INTERVAL_ALPHA);
> -
> -		break;
> -	case LED_CTL_STOP_WPS_FAIL:		/* WPS authentication fail */
> -		if (pLed->bLedWPSBlinkInProgress) {
> +		if (pLed->bLedLinkBlinkInProgress) {
>  			_cancel_timer_ex(&(pLed->BlinkTimer));
> -			pLed->bLedWPSBlinkInProgress = false;
> +			 pLed->bLedLinkBlinkInProgress = false;

Another here.

regards,
dan carpenter

Re: [PATCH 09/10] staging: rtl8188eu: Remove unused enum LED_STATE_871x members.

[Dan Carpenter]

It's ok to renumber all of these?  It's not something the firmware will
care about?  Have you tested this?  Same for patch 10/10.

(These questions are just questions.  I don't ask rhetorical questions
on email.  I don't know the answers).

regards,
dan carpenter

Re: [PATCH 03/10] staging: rtl8188eu: Remove _ReadLEDSetting() function.

[navin patidar]

Hi dan

it's just a cleanup patch and i also tested all patches of this patch
series on the hardware (TP-LINK  TL-WN723N).
my mistake i should have added "Tested-by" tag for all patches.

Tested-by: navin patidar <navin.patidar@gmail.com>

regards,
--navin-patidar

On Tue, Apr 22, 2014 at 3:41 PM, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> On Sun, Apr 20, 2014 at 02:17:11PM +0530, navin patidar wrote:
>> _ReadLEDSetting() doesn't read led settings this function actually
>> initialize  member variables of struct led_priv, we should do that
>> inside rtl8188eu_InitSwLeds().
>>
>
> This seems like a bugfix or is it just a cleanup?  It's not clear to me
> from the patch description.  Have you tested this patch?
>
> regards,
> dan carpenter
>

Re: [PATCH 03/10] staging: rtl8188eu: Remove _ReadLEDSetting() function.

[Dan Carpenter]

On Tue, Apr 22, 2014 at 07:31:50PM +0530, navin patidar wrote:
> Hi dan
> 
> it's just a cleanup patch and i also tested all patches of this patch
> series on the hardware (TP-LINK  TL-WN723N).
> my mistake i should have added "Tested-by" tag for all patches.
> 
> Tested-by: navin patidar <navin.patidar@gmail.com>

No no.  It's not necesary to add a tested by to everything.  It was just
something I was curious about.  The patches looked ok.  If you hadn't
tested them I would review them a second time more carefully.

regards,
dan carpenter

Re: [PATCH 03/10] staging: rtl8188eu: Remove _ReadLEDSetting() function.

[Larry Finger]

On 04/22/2014 09:14 AM, Dan Carpenter wrote:
> On Tue, Apr 22, 2014 at 07:31:50PM +0530, navin patidar wrote:
>> Hi dan
>>
>> it's just a cleanup patch and i also tested all patches of this patch
>> series on the hardware (TP-LINK  TL-WN723N).
>> my mistake i should have added "Tested-by" tag for all patches.
>>
>> Tested-by: navin patidar <navin.patidar@gmail.com>
>
> No no.  It's not necesary to add a tested by to everything.  It was just
> something I was curious about.  The patches looked ok.  If you hadn't
> tested them I would review them a second time more carefully.

To me, the opposite case is true. If you have not tested, then you need to 
explicitly state "compile tested only" in the commit message. Without saying 
that, your signed-off-by is implying that you have tested, as well as declaring 
that you own the copyright to the material.

Larry

Re: [PATCH 03/10] staging: rtl8188eu: Remove _ReadLEDSetting() function.

[Dan Carpenter]

I sometimes mark my patches as untested and there are a couple other
people who do as well.  For the staging tree probably 80% of the patches
are not tested.  I kind of know who regular developers are and who tests
their patches.

But one thing I really want to stress is that if I ask something about a
patch, it doesn't mean I'm annoyed.  It just means I was curious.

regards,
dan carpenter

Re: [PATCH 09/10] staging: rtl8188eu: Remove unused enum LED_STATE_871x members.

[navin patidar]

dan, It is ok to rearrange and remove members of  enum LED_STATE_871x
and  enum LED_CTL_MODE.
these enum are not related to firmware .

regards,
--navin-patidar

On Tue, Apr 22, 2014 at 4:05 PM, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> It's ok to renumber all of these?  It's not something the firmware will
> care about?  Have you tested this?  Same for patch 10/10.
>
> (These questions are just questions.  I don't ask rhetorical questions
> on email.  I don't know the answers).
>
> regards,
> dan carpenter
>

Re: [PATCH 03/10] staging: rtl8188eu: Remove _ReadLEDSetting() function.

[navin patidar]

On Tue, Apr 22, 2014 at 7:58 PM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
>
> To me, the opposite case is true. If you have not tested, then you need to
> explicitly state "compile tested only" in the commit message. Without saying
> that, your signed-off-by is implying that you have tested, as well as
> declaring that you own the copyright to the material.

I didn't know that  signed-off-by implies both tested and authored.
thanks for clearing that up.

regards,
--navin-patidar

Re: [PATCH 09/10] staging: rtl8188eu: Remove unused enum LED_STATE_871x members.

[Dan Carpenter]

On Wed, Apr 23, 2014 at 09:01:24AM +0530, navin patidar wrote:
> dan, It is ok to rearrange and remove members of  enum LED_STATE_871x
> and  enum LED_CTL_MODE.
> these enum are not related to firmware .

Ok.  Cool.

regards,
dan carpenter