[PATCH 3.14 00/66] 3.14.13-stable review

[PATCH 3.14 00/66] 3.14.13-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.14.13 release.
There are 66 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Jul 17 23:16:50 UTC 2014.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.13-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.14.13-rc1

Lan Tianyu <tianyu.lan@intel.com>
    ACPI / battery: Retry to get battery information if failed during probing

Roland Dreier <roland@purestorage.com>
    x86, ioremap: Speed up check for RAM pages

H. Peter Anvin <hpa@zytor.com>
    x86, espfix: Make it possible to disable 16-bit support

H. Peter Anvin <hpa@zytor.com>
    x86, espfix: Make espfix64 a Kconfig option, fix UML

H. Peter Anvin <hpa@linux.intel.com>
    x86, espfix: Fix broken header guard

H. Peter Anvin <hpa@linux.intel.com>
    x86, espfix: Move espfix definitions into a separate header file

H. Peter Anvin <hpa@linux.intel.com>
    x86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack

H. Peter Anvin <hpa@zytor.com>
    Revert "x86-64, modify_ldt: Make support for 16-bit segments a runtime option"

Guenter Roeck <linux@roeck-us.net>
    powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64

Chen Gang <gang.chen.5i5j@gmail.com>
    drivers/rtc/rtc-puv3.c: use dev_dbg() instead of dev_debug() for typo issue

Chen Gang <gang.chen.5i5j@gmail.com>
    drivers/rtc/rtc-puv3.c: remove "&dev->" for typo issue

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    ring-buffer: Check if buffer exists before polling

Joonsoo Kim <iamjoonsoo.kim@lge.com>
    DMA, CMA: fix possible memory leak

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915: Don't clobber the GTT when it's within stolen memory

Christian König <christian.koenig@amd.com>
    drm/radeon: stop poisoning the GART TLB

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: fix typo in golden register setup on evergreen

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: fix typo in ci_stop_dpm()

Alexandre Demers <alexandre.f.demers@gmail.com>
    drm/radeon/dpm: Reenabling SS on Cayman

Theodore Ts'o <tytso@mit.edu>
    ext4: fix a potential deadlock in __ext4_es_shrink()

Eric Sandeen <sandeen@redhat.com>
    ext4: disable synchronous transaction batching if max_batch_time==0

Theodore Ts'o <tytso@mit.edu>
    ext4: clarify ext4_error message in ext4_mb_generate_buddy_error()

Theodore Ts'o <tytso@mit.edu>
    ext4: clarify error count warning messages

Theodore Ts'o <tytso@mit.edu>
    ext4: fix unjournalled bg descriptor while initializing inode bitmap

Alex Williamson <alex.williamson@redhat.com>
    PCI: Fix unaligned access in AF transaction pending test

Vincent Minet <vincent@vincent-minet.net>
    intel_pstate: Set CPU number before accessing MSRs

Dirk Brandewie <dirk.j.brandewie@intel.com>
    intel_pstate: Update documentation of {max,min}_perf_pct sysfs files

Dirk Brandewie <dirk.j.brandewie@intel.com>
    intel_pstate: don't touch turbo bit if turbo disabled or unavailable.

Dirk Brandewie <dirk.j.brandewie@intel.com>
    intel_pstate: Fix setting VID

Mikulas Patocka <mpatocka@redhat.com>
    dm: allocate a special workqueue for deferred device removal

Joe Thornber <thornber@redhat.com>
    dm io: fix a race condition in the wake up code for sync_io

K. Y. Srinivasan <kys@microsoft.com>
    Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code

Stephen Boyd <sboyd@codeaurora.org>
    clk: qcom: HDMI source sel is 3 not 2

Krzysztof Kozlowski <k.kozlowski@samsung.com>
    clk: s2mps11: Fix double free corruption during driver unbind

Thomas Gleixner <tglx@linutronix.de>
    clk: spear3xx: Use proper control register offset

Roger Quadros <rogerq@ti.com>
    phy: core: Fix error path in phy_create()

Colin Cross <ccross@android.com>
    arm64: implement TASK_SIZE_OF

Cristian Stoica <cristian.stoica@freescale.com>
    crypto: caam - fix memleak in caam_jr module

Jussi Kivilinna <jussi.kivilinna@iki.fi>
    crypto: sha512_ssse3 - fix byte count to bit count conversion

Prabhakar Lad <prabhakar.csengg@gmail.com>
    cpufreq: Makefile: fix compilation for davinci platform

Joel Stanley <joel@jms.id.au>
    powerpc/perf: Clear MMCR2 when enabling PMU

Joel Stanley <joel@jms.id.au>
    powerpc/perf: Add PPMU_ARCH_207S define

Anton Blanchard <anton@samba.org>
    powerpc/perf: Never program book3s PMCs with values >= 0x80000000

Lv Zheng <lv.zheng@intel.com>
    ACPI / EC: Fix race condition in ec_transaction_completed()

Lv Zheng <lv.zheng@intel.com>
    ACPI / EC: Remove duplicated ec_wait_ibf0() waiter

Lv Zheng <lv.zheng@intel.com>
    ACPI / EC: Add asynchronous command byte write support

Lv Zheng <lv.zheng@intel.com>
    ACPI / EC: Avoid race condition related to advance_transaction()

Andy Whitcroft <apw@canonical.com>
    ACPI / resources: only reject zero length resources based at address zero

Lan Tianyu <tianyu.lan@intel.com>
    Revert "ACPI / AC: Remove AC's proc directory."

Axel Lin <axel.lin@ingics.com>
    hwmon: (adm1021) Fix cache problem when writing temperature limits

Axel Lin <axel.lin@ingics.com>
    hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div

Guenter Roeck <linux@roeck-us.net>
    hwmon: (adm1031) Fix writes to limit registers

Guenter Roeck <linux@roeck-us.net>
    hwmon: (emc2103) Clamp limits instead of bailing out

Axel Lin <axel.lin@ingics.com>
    hwmon: (amc6821) Fix permissions for temp2_input

Aaron Lu <aaron.lu@intel.com>
    thermal: hwmon: Make the check for critical temp valid consistent

Guenter Roeck <linux@roeck-us.net>
    i8k: Fix non-SMP operation

Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
    workqueue: zero cpumask of wq_numa_possible_cpumask on init

Gu Zheng <guz.fnst@cn.fujitsu.com>
    cpuset,mempolicy: fix sleeping function called from invalid context

Maxime Bizon <mbizon@freebox.fr>
    workqueue: fix dev_set_uevent_suppress() imbalance

Helge Deller <deller@gmx.de>
    parisc,metag: Do not hardcode maximum userspace stack size

Helge Deller <deller@gmx.de>
    parisc: fix fanotify_mark() syscall on 32bit compat kernel

Helge Deller <deller@gmx.de>
    parisc: add serial ports of C8000/1GHz machine to hardware database

Jan Kardell <jan.kardell@telliq.com>
    iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends

Michal Sojka <sojkam1@fel.cvut.cz>
    USB: serial: ftdi_sio: Add Infineon Triboard

Bert Vermeulen <bert@biot.com>
    USB: ftdi_sio: Add extra PID.

Andras Kovacs <andras@sth.sze.hu>
    USB: cp210x: add support for Corsair usb dongle

Bernd Wachter <bernd.wachter@jolla.com>
    usb: option: Add ID for Telewell TW-LTE 4G v2


-------------

Diffstat:

 Documentation/cpu-freq/intel-pstate.txt      |   7 +-
 Documentation/x86/x86_64/mm.txt              |   2 +
 Makefile                                     |   4 +-
 arch/arm64/include/asm/memory.h              |   2 +
 arch/metag/include/asm/processor.h           |   2 +-
 arch/parisc/include/asm/processor.h          |   5 +-
 arch/parisc/kernel/hardware.c                |   3 +-
 arch/parisc/kernel/sys_parisc.c              |   6 +-
 arch/parisc/kernel/sys_parisc32.c            |  10 ++
 arch/parisc/kernel/syscall_table.S           |   2 +-
 arch/powerpc/Kconfig                         |   3 +-
 arch/powerpc/include/asm/perf_event_server.h |   3 +-
 arch/powerpc/perf/core-book3s.c              |  24 ++-
 arch/powerpc/perf/power8-pmu.c               |   2 +-
 arch/x86/Kconfig                             |  25 +++-
 arch/x86/crypto/sha512_ssse3_glue.c          |   2 +-
 arch/x86/include/asm/espfix.h                |  16 ++
 arch/x86/include/asm/pgtable_64_types.h      |   2 +
 arch/x86/include/asm/setup.h                 |   2 +
 arch/x86/kernel/Makefile                     |   1 +
 arch/x86/kernel/entry_32.S                   |  12 ++
 arch/x86/kernel/entry_64.S                   |  81 ++++++++++-
 arch/x86/kernel/espfix_64.c                  | 209 +++++++++++++++++++++++++++
 arch/x86/kernel/ldt.c                        |  10 +-
 arch/x86/kernel/smpboot.c                    |   7 +
 arch/x86/mm/dump_pagetables.c                |  31 ++--
 arch/x86/mm/ioremap.c                        |  26 +++-
 arch/x86/vdso/vdso32-setup.c                 |   8 -
 drivers/acpi/ac.c                            | 130 ++++++++++++++++-
 drivers/acpi/battery.c                       |  27 +++-
 drivers/acpi/ec.c                            | 128 ++++++++--------
 drivers/acpi/resource.c                      |  10 +-
 drivers/base/dma-contiguous.c                |  12 +-
 drivers/char/i8k.c                           |   4 +-
 drivers/clk/clk-s2mps11.c                    |   7 +-
 drivers/clk/qcom/mmcc-msm8960.c              |   2 +-
 drivers/clk/spear/spear3xx_clock.c           |   2 +-
 drivers/cpufreq/Makefile                     |   2 +-
 drivers/cpufreq/intel_pstate.c               |  35 +++--
 drivers/crypto/caam/jr.c                     |   8 +-
 drivers/gpu/drm/i915/i915_gem_stolen.c       |  44 ++++++
 drivers/gpu/drm/i915/i915_reg.h              |   3 +
 drivers/gpu/drm/radeon/ci_dpm.c              |   2 +-
 drivers/gpu/drm/radeon/evergreen.c           |   8 +-
 drivers/gpu/drm/radeon/rs600.c               |   6 +-
 drivers/gpu/drm/radeon/rv770_dpm.c           |   6 -
 drivers/hv/connection.c                      |   8 +-
 drivers/hwmon/adm1021.c                      |  14 +-
 drivers/hwmon/adm1029.c                      |   3 +
 drivers/hwmon/adm1031.c                      |   8 +-
 drivers/hwmon/amc6821.c                      |   2 +-
 drivers/hwmon/emc2103.c                      |  15 +-
 drivers/iio/adc/ti_am335x_adc.c              |   2 +-
 drivers/md/dm-io.c                           |  22 +--
 drivers/md/dm.c                              |  15 +-
 drivers/pci/pci.c                            |   9 +-
 drivers/phy/phy-core.c                       |   7 +-
 drivers/rtc/rtc-puv3.c                       |   4 +-
 drivers/thermal/thermal_hwmon.c              |  33 +++--
 drivers/usb/serial/cp210x.c                  |   1 +
 drivers/usb/serial/ftdi_sio.c                |   5 +-
 drivers/usb/serial/ftdi_sio_ids.h            |   9 +-
 drivers/usb/serial/option.c                  |   2 +
 fs/ext4/extents_status.c                     |   4 +-
 fs/ext4/ialloc.c                             |  14 +-
 fs/ext4/mballoc.c                            |   4 +-
 fs/ext4/super.c                              |   9 +-
 fs/jbd2/transaction.c                        |   5 +-
 include/linux/ring_buffer.h                  |   2 +-
 init/main.c                                  |   4 +
 kernel/cpuset.c                              |   8 +-
 kernel/trace/ring_buffer.c                   |   5 +-
 kernel/trace/trace.c                         |  25 +++-
 kernel/trace/trace.h                         |   4 +-
 kernel/workqueue.c                           |   3 +-
 mm/Kconfig                                   |  15 ++
 mm/mempolicy.c                               |   2 -
 77 files changed, 932 insertions(+), 274 deletions(-)

[PATCH 3.14 01/66] usb: option: Add ID for Telewell TW-LTE 4G v2

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bernd Wachter <bernd.wachter@jolla.com>

commit 3d28bd840b2d3981cd28caf5fe1df38f1344dd60 upstream.

Add ID of the Telewell 4G v2 hardware to option driver to get legacy
serial interface working

Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1487,6 +1487,8 @@ static const struct usb_device_id option
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },

[PATCH 3.14 02/66] USB: cp210x: add support for Corsair usb dongle

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andras Kovacs <andras@sth.sze.hu>

commit b9326057a3d8447f5d2e74a7b521ccf21add2ec0 upstream.

Corsair USB Dongles are shipped with Corsair AXi series PSUs.
These are cp210x serial usb devices, so make driver detect these.
I have a program, that can get information from these PSUs.

Tested with 2 different dongles shipped with Corsair AX860i and
AX1200i units.

Signed-off-by: Andras Kovacs <andras@sth.sze.hu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -153,6 +153,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
+	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */

[PATCH 3.14 03/66] USB: ftdi_sio: Add extra PID.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bert Vermeulen <bert@biot.com>

commit 5a7fbe7e9ea0b1b9d7ffdba64db1faa3a259164c upstream.

This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the
Testo 435-4 uses this, likely other gear as well.

Signed-off-by: Bert Vermeulen <bert@biot.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    3 ++-
 drivers/usb/serial/ftdi_sio_ids.h |    3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -720,7 +720,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
-	{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_1_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_3_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -798,7 +798,8 @@
  * Submitted by Colin Leroy
  */
 #define TESTO_VID			0x128D
-#define TESTO_USB_INTERFACE_PID		0x0001
+#define TESTO_1_PID			0x0001
+#define TESTO_3_PID			0x0003
 
 /*
  * Mobility Electronics products.

[PATCH 3.14 04/66] USB: serial: ftdi_sio: Add Infineon Triboard

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Sojka <sojkam1@fel.cvut.cz>

commit d8279a40e50ad55539780aa617a32a53d7f0953e upstream.

This adds support for Infineon TriBoard TC1798 [1]. Only interface 1
is used as serial line (see [2], Figure 8-6).

[1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268
[2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 8 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -945,6 +945,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
+	/* Infineon Devices */
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
 	{ }					/* Terminating entry */
 };
 
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -584,6 +584,12 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * Infineon Technologies
+ */
+#define INFINEON_VID		0x058b
+#define INFINEON_TRIBOARD_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+
+/*
  * Acton Research Corp.
  */
 #define ACTON_VID		0x0647	/* Vendor ID */

[PATCH 3.14 05/66] iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kardell <jan.kardell@telliq.com>

commit baa3c65298c089a9014b4e523a14ec2885cca1bc upstream.

Since AI lines could be selected at will (linux-3.11) the sending
and receiving ends of the FIFO does not agree about what step is used
for a line. It only works if the last lines are used, like 5,6,7,
and fails if ie 2,4,6 is selected in DT.

Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/ti_am335x_adc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -375,7 +375,7 @@ static int tiadc_read_raw(struct iio_dev
 			return -EAGAIN;
 		}
 	}
-	map_val = chan->channel + TOTAL_CHANNELS;
+	map_val = adc_dev->channel_step[chan->scan_index];
 
 	/*
 	 * We check the complete FIFO. We programmed just one entry but in case

[PATCH 3.14 06/66] parisc: add serial ports of C8000/1GHz machine to hardware database

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit eadcc7208a2237016be7bdff4551ba7614da85c8 upstream.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/kernel/hardware.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/parisc/kernel/hardware.c
+++ b/arch/parisc/kernel/hardware.c
@@ -1210,7 +1210,8 @@ static struct hp_hardware hp_hardware_li
 	{HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, 
 	{HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, 
 	{HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, 
-	{HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"},
+	{HPHW_FIO, 0x076, 0x000AD, 0x0, "Crestone Peak Core RS-232"},
+	{HPHW_FIO, 0x077, 0x000AD, 0x0, "Crestone Peak Fast? Core RS-232"},
 	{HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, 
 	{HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, 
 	{HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, 

[PATCH 3.14 07/66] parisc: fix fanotify_mark() syscall on 32bit compat kernel

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit ab8a261ba5e2dd9206da640de5870cc31d568a7c upstream.

On parisc we can not use the existing compat implementation for fanotify_mark()
because for the 64bit mask parameter the higher and lower 32bits are ordered
differently than what the compat function expects from big endian
architectures.

Specifically:
It finally turned out, that on hppa we end up with different assignments
of parameters to kernel arguments depending on if we call the glibc
wrapper function
 int fanotify_mark (int __fanotify_fd, unsigned int __flags,
                    uint64_t __mask, int __dfd, const char *__pathname);
or directly calling the syscall manually
 syscall(__NR_fanotify_mark, ...)

Reason is, that the syscall() function is implemented as C-function and
because we now have the sysno as first parameter in front of the other
parameters the compiler will unexpectedly add an empty paramenter in
front of the u64 value to ensure the correct calling alignment for 64bit
values.
This means, on hppa you can't simply use syscall() to call the kernel
fanotify_mark() function directly, but you have to use the glibc
function instead.

This patch fixes the kernel in the hppa-arch specifc coding to adjust
the parameters in a way as if userspace calls the glibc wrapper function
fanotify_mark().

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/kernel/sys_parisc32.c  |   10 ++++++++++
 arch/parisc/kernel/syscall_table.S |    2 +-
 2 files changed, 11 insertions(+), 1 deletion(-)

--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -4,6 +4,7 @@
  * Copyright (C) 2000-2001 Hewlett Packard Company
  * Copyright (C) 2000 John Marvin
  * Copyright (C) 2001 Matthew Wilcox
+ * Copyright (C) 2014 Helge Deller <deller@gmx.de>
  *
  * These routines maintain argument size conversion between 32bit and 64bit
  * environment. Based heavily on sys_ia32.c and sys_sparc32.c.
@@ -57,3 +58,12 @@ asmlinkage long sys32_unimplemented(int
     	current->comm, current->pid, r20);
     return -ENOSYS;
 }
+
+asmlinkage long sys32_fanotify_mark(compat_int_t fanotify_fd, compat_uint_t flags,
+	compat_uint_t mask0, compat_uint_t mask1, compat_int_t dfd,
+	const char  __user * pathname)
+{
+	return sys_fanotify_mark(fanotify_fd, flags,
+			((__u64)mask1 << 32) | mask0,
+			 dfd, pathname);
+}
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -418,7 +418,7 @@
 	ENTRY_SAME(accept4)		/* 320 */
 	ENTRY_SAME(prlimit64)
 	ENTRY_SAME(fanotify_init)
-	ENTRY_COMP(fanotify_mark)
+	ENTRY_DIFF(fanotify_mark)
 	ENTRY_COMP(clock_adjtime)
 	ENTRY_SAME(name_to_handle_at)	/* 325 */
 	ENTRY_COMP(open_by_handle_at)

[PATCH 3.14 08/66] parisc,metag: Do not hardcode maximum userspace stack size

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit 042d27acb64924a0e8a43e972485913a32407beb upstream.

This patch affects only architectures where the stack grows upwards
(currently parisc and metag only). On those do not hardcode the maximum
initial stack size to 1GB for 32-bit processes, but make it configurable
via a config option.

The main problem with the hardcoded stack size is, that we have two
memory regions which grow upwards: stack and heap. To keep most of the
memory available for heap in a flexmap memory layout, it makes no sense
to hard allocate up to 1GB of the memory for stack which can't be used
as heap then.

This patch makes the stack size for 32-bit processes configurable and
uses 80MB as default value which has been in use during the last few
years on parisc and which hasn't showed any problems yet.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/include/asm/processor.h  |    2 +-
 arch/parisc/include/asm/processor.h |    5 ++++-
 arch/parisc/kernel/sys_parisc.c     |    6 +++---
 mm/Kconfig                          |   15 +++++++++++++++
 4 files changed, 23 insertions(+), 5 deletions(-)

--- a/arch/metag/include/asm/processor.h
+++ b/arch/metag/include/asm/processor.h
@@ -23,7 +23,7 @@
 #define STACK_TOP	(TASK_SIZE - PAGE_SIZE)
 #define STACK_TOP_MAX	STACK_TOP
 /* Maximum virtual space for stack */
-#define STACK_SIZE_MAX	(1 << 28)	/* 256 MB */
+#define STACK_SIZE_MAX	(CONFIG_MAX_STACK_SIZE_MB*1024*1024)
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -55,7 +55,10 @@
 #define STACK_TOP	TASK_SIZE
 #define STACK_TOP_MAX	DEFAULT_TASK_SIZE
 
-#define STACK_SIZE_MAX	(1 << 30)	/* 1 GB */
+/* Allow bigger stacks for 64-bit processes */
+#define STACK_SIZE_MAX	(USER_WIDE_MODE					\
+			 ? (1 << 30)	/* 1 GB */			\
+			 : (CONFIG_MAX_STACK_SIZE_MB*1024*1024))
 
 #endif
 
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -72,10 +72,10 @@ static unsigned long mmap_upper_limit(vo
 {
 	unsigned long stack_base;
 
-	/* Limit stack size to 1GB - see setup_arg_pages() in fs/exec.c */
+	/* Limit stack size - see setup_arg_pages() in fs/exec.c */
 	stack_base = rlimit_max(RLIMIT_STACK);
-	if (stack_base > (1 << 30))
-		stack_base = 1 << 30;
+	if (stack_base > STACK_SIZE_MAX)
+		stack_base = STACK_SIZE_MAX;
 
 	return PAGE_ALIGN(STACK_TOP - stack_base);
 }
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -580,3 +580,18 @@ config PGTABLE_MAPPING
 
 	  You can check speed with zsmalloc benchmark:
 	  https://github.com/spartacus06/zsmapbench
+
+config MAX_STACK_SIZE_MB
+	int "Maximum user stack size for 32-bit processes (MB)"
+	default 80
+	range 8 256 if METAG
+	range 8 2048
+	depends on STACK_GROWSUP && (!64BIT || COMPAT)
+	help
+	  This is the maximum stack size in Megabytes in the VM layout of 32-bit
+	  user processes when the stack grows upwards (currently only on parisc
+	  and metag arch). The stack will be located at the highest memory
+	  address minus the given value, unless the RLIMIT_STACK hard limit is
+	  changed to a smaller value in which case that is used.
+
+	  A sane initial value is 80 MB.

[PATCH 3.14 09/66] workqueue: fix dev_set_uevent_suppress() imbalance

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxime Bizon <mbizon@freebox.fr>

commit bddbceb688c6d0decaabc7884fede319d02f96c8 upstream.

Uevents are suppressed during attributes registration, but never
restored, so kobject_uevent() does nothing.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 226223ab3c4118ddd10688cc2c131135848371ab
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/workqueue.c |    1 +
 1 file changed, 1 insertion(+)

--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3415,6 +3415,7 @@ int workqueue_sysfs_register(struct work
 		}
 	}
 
+	dev_set_uevent_suppress(&wq_dev->dev, false);
 	kobject_uevent(&wq_dev->dev.kobj, KOBJ_ADD);
 	return 0;
 }

[PATCH 3.14 10/66] cpuset,mempolicy: fix sleeping function called from invalid context

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gu Zheng <guz.fnst@cn.fujitsu.com>

commit 391acf970d21219a2a5446282d3b20eace0c0d7a upstream.

When runing with the kernel(3.15-rc7+), the follow bug occurs:
[ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586
[ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python
[ 9969.441175] INFO: lockdep is turned off.
[ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G       A      3.15.0-rc7+ #85
[ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012
[ 9969.706052]  ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18
[ 9969.795323]  ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c
[ 9969.884710]  ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000
[ 9969.974071] Call Trace:
[ 9970.003403]  [<ffffffff8162f523>] dump_stack+0x4d/0x66
[ 9970.065074]  [<ffffffff8109995a>] __might_sleep+0xfa/0x130
[ 9970.130743]  [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0
[ 9970.200638]  [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210
[ 9970.272610]  [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140
[ 9970.344584]  [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150
[ 9970.409282]  [<ffffffff811b1385>] __mpol_dup+0xe5/0x150
[ 9970.471897]  [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150
[ 9970.536585]  [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40
[ 9970.613763]  [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10
[ 9970.683660]  [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50
[ 9970.759795]  [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40
[ 9970.834885]  [<ffffffff8106a598>] do_fork+0xd8/0x380
[ 9970.894375]  [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0
[ 9970.969470]  [<ffffffff8106a8c6>] SyS_clone+0x16/0x20
[ 9971.030011]  [<ffffffff81642009>] stub_clone+0x69/0x90
[ 9971.091573]  [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b

The cause is that cpuset_mems_allowed() try to take
mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in
__mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is
under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock
protection region to protect the access to cpuset only in
current_cpuset_is_being_rebound(). So that we can avoid this bug.

This patch is a temporary solution that just addresses the bug
mentioned above, can not fix the long-standing issue about cpuset.mems
rebinding on fork():

"When the forker's task_struct is duplicated (which includes
 ->mems_allowed) and it races with an update to cpuset_being_rebound
 in update_tasks_nodemask() then the task's mems_allowed doesn't get
 updated. And the child task's mems_allowed can be wrong if the
 cpuset's nodemask changes before the child has been added to the
 cgroup's tasklist."

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cpuset.c |    8 +++++++-
 mm/mempolicy.c  |    2 --
 2 files changed, 7 insertions(+), 3 deletions(-)

--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1236,7 +1236,13 @@ done:
 
 int current_cpuset_is_being_rebound(void)
 {
-	return task_cs(current) == cpuset_being_rebound;
+	int ret;
+
+	rcu_read_lock();
+	ret = task_cs(current) == cpuset_being_rebound;
+	rcu_read_unlock();
+
+	return ret;
 }
 
 static int update_relax_domain_level(struct cpuset *cs, s64 val)
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2170,7 +2170,6 @@ struct mempolicy *__mpol_dup(struct memp
 	} else
 		*new = *old;
 
-	rcu_read_lock();
 	if (current_cpuset_is_being_rebound()) {
 		nodemask_t mems = cpuset_mems_allowed(current);
 		if (new->flags & MPOL_F_REBINDING)
@@ -2178,7 +2177,6 @@ struct mempolicy *__mpol_dup(struct memp
 		else
 			mpol_rebind_policy(new, &mems, MPOL_REBIND_ONCE);
 	}
-	rcu_read_unlock();
 	atomic_set(&new->refcnt, 1);
 	return new;
 }

[PATCH 3.14 11/66] workqueue: zero cpumask of wq_numa_possible_cpumask on init

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>

commit 5a6024f1604eef119cf3a6fa413fe0261a81a8f3 upstream.

When hot-adding and onlining CPU, kernel panic occurs, showing following
call trace.

  BUG: unable to handle kernel paging request at 0000000000001d08
  IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10
  PGD 0
  Oops: 0000 [#1] SMP
  ...
  Call Trace:
   [<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50
   [<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0
   [<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0
   [<ffffffff811926f1>] new_slab+0x91/0x300
   [<ffffffff815de95a>] __slab_alloc+0x2bb/0x482
   [<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0
   [<ffffffff810a3c78>] ? load_balance+0x218/0x890
   [<ffffffff8101a679>] ? sched_clock+0x9/0x10
   [<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10
   [<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200
   [<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0
   [<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60
   [<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140
   [<ffffffff8105d0ec>] do_fork+0xbc/0x360
   [<ffffffff8105d3b6>] kernel_thread+0x26/0x30
   [<ffffffff81086652>] kthreadd+0x2c2/0x300
   [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60
   [<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0
   [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60

In my investigation, I found the root cause is wq_numa_possible_cpumask.
All entries of wq_numa_possible_cpumask is allocated by
alloc_cpumask_var_node(). And these entries are used without initializing.
So these entries have wrong value.

When hot-adding and onlining CPU, wq_update_unbound_numa() is called.
wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq()
calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set
as follow:

3592         /* if cpumask is contained inside a NUMA node, we belong to that node */
3593         if (wq_numa_enabled) {
3594                 for_each_node(node) {
3595                         if (cpumask_subset(pool->attrs->cpumask,
3596                                            wq_numa_possible_cpumask[node])) {
3597                                 pool->node = node;
3598                                 break;
3599                         }
3600                 }
3601         }

But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong
node is selected. As a result, kernel panic occurs.

By this patch, all entries of wq_numa_possible_cpumask are allocated by
zalloc_cpumask_var_node to initialize them. And the panic disappeared.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: bce903809ab3 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/workqueue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -5027,7 +5027,7 @@ static void __init wq_numa_init(void)
 	BUG_ON(!tbl);
 
 	for_each_node(node)
-		BUG_ON(!alloc_cpumask_var_node(&tbl[node], GFP_KERNEL,
+		BUG_ON(!zalloc_cpumask_var_node(&tbl[node], GFP_KERNEL,
 				node_online(node) ? node : NUMA_NO_NODE));
 
 	for_each_possible_cpu(cpu) {

[PATCH 3.14 12/66] i8k: Fix non-SMP operation

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit 6d827fbcc370ca259a2905309f64161ab7b10596 upstream.

Commit f36fdb9f0266 (i8k: Force SMM to run on CPU 0) adds support
for multi-core CPUs to the driver. Unfortunately, that causes it
to fail loading if compiled without SMP support, at least on
32 bit kernels. Kernel log shows "i8k: unable to get SMM Dell
signature", and function i8k_smm is found to return -EINVAL.

Testing revealed that the culprit is the missing return value check
of set_cpus_allowed_ptr.

Fixes: f36fdb9f0266 (i8k: Force SMM to run on CPU 0)
Reported-by: Jim Bos <jim876@xs4all.nl>
Tested-by: Jim Bos <jim876@xs4all.nl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/i8k.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -138,7 +138,9 @@ static int i8k_smm(struct smm_regs *regs
 	if (!alloc_cpumask_var(&old_mask, GFP_KERNEL))
 		return -ENOMEM;
 	cpumask_copy(old_mask, &current->cpus_allowed);
-	set_cpus_allowed_ptr(current, cpumask_of(0));
+	rc = set_cpus_allowed_ptr(current, cpumask_of(0));
+	if (rc)
+		goto out;
 	if (smp_processor_id() != 0) {
 		rc = -EBUSY;
 		goto out;

[PATCH 3.14 13/66] thermal: hwmon: Make the check for critical temp valid consistent

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Lu <aaron.lu@intel.com>

commit e8db5d6736a712a3e2280c0e31f4b301d85172d8 upstream.

On 05/21/2014 04:22 PM, Aaron Lu wrote:
> On 05/21/2014 01:57 PM, Kui Zhang wrote:
>> Hello,
>>
>> I get following error when rmmod thermal.
>>
>> rmmod  thermal
>> Killed

While dealing with this problem, I found another problem that also
results in a kernel crash on thermal module removal:

From: Aaron Lu <aaron.lu@intel.com>
Date: Wed, 21 May 2014 16:05:38 +0800
Subject: [PATCH 3.14 13/66] thermal: hwmon: Make the check for critical temp valid consistent

We used the tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, temp)
to decide if we need to create the temp_crit attribute file but we just
check if tz->ops->get_crit_temp exists to decide if we need to remove
that attribute file. Some ACPI thermal zone doesn't have a valid critical
trip point and that would result in removing a non-existent device file
on thermal module unload.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/thermal/thermal_hwmon.c |   33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -140,6 +140,12 @@ thermal_hwmon_lookup_temp(const struct t
 	return NULL;
 }
 
+static bool thermal_zone_crit_temp_valid(struct thermal_zone_device *tz)
+{
+	unsigned long temp;
+	return tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, &temp);
+}
+
 int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 {
 	struct thermal_hwmon_device *hwmon;
@@ -189,21 +195,18 @@ int thermal_add_hwmon_sysfs(struct therm
 	if (result)
 		goto free_temp_mem;
 
-	if (tz->ops->get_crit_temp) {
-		unsigned long temperature;
-		if (!tz->ops->get_crit_temp(tz, &temperature)) {
-			snprintf(temp->temp_crit.name,
-				 sizeof(temp->temp_crit.name),
+	if (thermal_zone_crit_temp_valid(tz)) {
+		snprintf(temp->temp_crit.name,
+				sizeof(temp->temp_crit.name),
 				"temp%d_crit", hwmon->count);
-			temp->temp_crit.attr.attr.name = temp->temp_crit.name;
-			temp->temp_crit.attr.attr.mode = 0444;
-			temp->temp_crit.attr.show = temp_crit_show;
-			sysfs_attr_init(&temp->temp_crit.attr.attr);
-			result = device_create_file(hwmon->device,
-						    &temp->temp_crit.attr);
-			if (result)
-				goto unregister_input;
-		}
+		temp->temp_crit.attr.attr.name = temp->temp_crit.name;
+		temp->temp_crit.attr.attr.mode = 0444;
+		temp->temp_crit.attr.show = temp_crit_show;
+		sysfs_attr_init(&temp->temp_crit.attr.attr);
+		result = device_create_file(hwmon->device,
+					    &temp->temp_crit.attr);
+		if (result)
+			goto unregister_input;
 	}
 
 	mutex_lock(&thermal_hwmon_list_lock);
@@ -250,7 +253,7 @@ void thermal_remove_hwmon_sysfs(struct t
 	}
 
 	device_remove_file(hwmon->device, &temp->temp_input.attr);
-	if (tz->ops->get_crit_temp)
+	if (thermal_zone_crit_temp_valid(tz))
 		device_remove_file(hwmon->device, &temp->temp_crit.attr);
 
 	mutex_lock(&thermal_hwmon_list_lock);

[PATCH 3.14 14/66] hwmon: (amc6821) Fix permissions for temp2_input

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit df86754b746e9a0ff6f863f690b1c01d408e3cdc upstream.

temp2_input should not be writable, fix it.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/amc6821.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -704,7 +704,7 @@ static SENSOR_DEVICE_ATTR(temp1_max_alar
 	get_temp_alarm, NULL, IDX_TEMP1_MAX);
 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
 	get_temp_alarm, NULL, IDX_TEMP1_CRIT);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO,
 	get_temp, NULL, IDX_TEMP2_INPUT);
 static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp,
 	set_temp, IDX_TEMP2_MIN);

[PATCH 3.14 15/66] hwmon: (emc2103) Clamp limits instead of bailing out

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit f6c2dd20108c35e30e2c1f3c6142d189451a626b upstream.

It is customary to clamp limits instead of bailing out with an error
if a configured limit is out of the range supported by the driver.
This simplifies limit configuration, since the user will not typically
know chip and/or driver specific limits.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/emc2103.c |   15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -250,9 +250,7 @@ static ssize_t set_temp_min(struct devic
 	if (result < 0)
 		return result;
 
-	val = DIV_ROUND_CLOSEST(val, 1000);
-	if ((val < -63) || (val > 127))
-		return -EINVAL;
+	val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127);
 
 	mutex_lock(&data->update_lock);
 	data->temp_min[nr] = val;
@@ -274,9 +272,7 @@ static ssize_t set_temp_max(struct devic
 	if (result < 0)
 		return result;
 
-	val = DIV_ROUND_CLOSEST(val, 1000);
-	if ((val < -63) || (val > 127))
-		return -EINVAL;
+	val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127);
 
 	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = val;
@@ -390,15 +386,14 @@ static ssize_t set_fan_target(struct dev
 {
 	struct emc2103_data *data = emc2103_update_device(dev);
 	struct i2c_client *client = to_i2c_client(dev);
-	long rpm_target;
+	unsigned long rpm_target;
 
-	int result = kstrtol(buf, 10, &rpm_target);
+	int result = kstrtoul(buf, 10, &rpm_target);
 	if (result < 0)
 		return result;
 
 	/* Datasheet states 16384 as maximum RPM target (table 3.2) */
-	if ((rpm_target < 0) || (rpm_target > 16384))
-		return -EINVAL;
+	rpm_target = clamp_val(rpm_target, 0, 16384);
 
 	mutex_lock(&data->update_lock);
 

[PATCH 3.14 16/66] hwmon: (adm1031) Fix writes to limit registers

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit 145e74a4e5022225adb84f4e5d4fff7938475c35 upstream.

Upper limit for write operations to temperature limit registers
was clamped to a fractional value. However, limit registers do
not support fractional values. As a result, upper limits of 127.5
degrees C or higher resulted in a rounded limit of 128 degrees C.
Since limit registers are signed, this was stored as -128 degrees C.
Clamp limits to (-55, +127) degrees C to solve the problem.

Value on writes to auto_temp[12]_min and auto_temp[12]_max were not
clamped at all, but masked. As a result, out-of-range writes resulted
in a more or less arbitrary limit. Clamp those attributes to (0, 127)
degrees C for more predictable results.

Cc: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/adm1031.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -365,6 +365,7 @@ set_auto_temp_min(struct device *dev, st
 	if (ret)
 		return ret;
 
+	val = clamp_val(val, 0, 127000);
 	mutex_lock(&data->update_lock);
 	data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
 	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
@@ -394,6 +395,7 @@ set_auto_temp_max(struct device *dev, st
 	if (ret)
 		return ret;
 
+	val = clamp_val(val, 0, 127000);
 	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr],
 						  data->pwm[nr]);
@@ -696,7 +698,7 @@ static ssize_t set_temp_min(struct devic
 	if (ret)
 		return ret;
 
-	val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
+	val = clamp_val(val, -55000, 127000);
 	mutex_lock(&data->update_lock);
 	data->temp_min[nr] = TEMP_TO_REG(val);
 	adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
@@ -717,7 +719,7 @@ static ssize_t set_temp_max(struct devic
 	if (ret)
 		return ret;
 
-	val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
+	val = clamp_val(val, -55000, 127000);
 	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = TEMP_TO_REG(val);
 	adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
@@ -738,7 +740,7 @@ static ssize_t set_temp_crit(struct devi
 	if (ret)
 		return ret;
 
-	val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
+	val = clamp_val(val, -55000, 127000);
 	mutex_lock(&data->update_lock);
 	data->temp_crit[nr] = TEMP_TO_REG(val);
 	adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),

[PATCH 3.14 17/66] hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit 1035a9e3e9c76b64a860a774f5b867d28d34acc2 upstream.

Writing to fanX_div does not clear the cache. As a result, reading
from fanX_div may return the old value for up to two seconds
after writing a new value.

This patch ensures the fan_div cache is updated in set_fan_div().

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/adm1029.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -232,6 +232,9 @@ static ssize_t set_fan_div(struct device
 	/* Update the value */
 	reg = (reg & 0x3F) | (val << 6);
 
+	/* Update the cache */
+	data->fan_div[attr->index] = reg;
+
 	/* Write value */
 	i2c_smbus_write_byte_data(client,
 				  ADM1029_REG_FAN_DIV[attr->index], reg);

[PATCH 3.14 18/66] hwmon: (adm1021) Fix cache problem when writing temperature limits

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit c024044d4da2c9c3b32933b4235df1e409293b84 upstream.

The module test script for the adm1021 driver exposes a cache problem
when writing temperature limits. temp_min and temp_max are expected
to be stored in milli-degrees C but are stored in degrees C.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/adm1021.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -185,7 +185,7 @@ static ssize_t set_temp_max(struct devic
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1021_data *data = i2c_get_clientdata(client);
 	long temp;
-	int err;
+	int reg_val, err;
 
 	err = kstrtol(buf, 10, &temp);
 	if (err)
@@ -193,10 +193,11 @@ static ssize_t set_temp_max(struct devic
 	temp /= 1000;
 
 	mutex_lock(&data->update_lock);
-	data->temp_max[index] = clamp_val(temp, -128, 127);
+	reg_val = clamp_val(temp, -128, 127);
+	data->temp_max[index] = reg_val * 1000;
 	if (!read_only)
 		i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index),
-					  data->temp_max[index]);
+					  reg_val);
 	mutex_unlock(&data->update_lock);
 
 	return count;
@@ -210,7 +211,7 @@ static ssize_t set_temp_min(struct devic
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1021_data *data = i2c_get_clientdata(client);
 	long temp;
-	int err;
+	int reg_val, err;
 
 	err = kstrtol(buf, 10, &temp);
 	if (err)
@@ -218,10 +219,11 @@ static ssize_t set_temp_min(struct devic
 	temp /= 1000;
 
 	mutex_lock(&data->update_lock);
-	data->temp_min[index] = clamp_val(temp, -128, 127);
+	reg_val = clamp_val(temp, -128, 127);
+	data->temp_min[index] = reg_val * 1000;
 	if (!read_only)
 		i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index),
-					  data->temp_min[index]);
+					  reg_val);
 	mutex_unlock(&data->update_lock);
 
 	return count;

[PATCH 3.14 19/66] Revert "ACPI / AC: Remove ACs proc directory."

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lan Tianyu <tianyu.lan@intel.com>

commit e63f6e28dda6de3de2392ddca321e211fd860925 upstream.

Revert commit ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.),
because some old tools (e.g. kpowersave from kde 3.5.10) are still
using /proc/acpi/ac_adapter.

Fixes: ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.)
Reported-and-tested-by: Sorin Manolache <sorinm@gmail.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ac.c |  130 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 128 insertions(+), 2 deletions(-)

--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -30,6 +30,10 @@
 #include <linux/types.h>
 #include <linux/dmi.h>
 #include <linux/delay.h>
+#ifdef CONFIG_ACPI_PROCFS_POWER
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#endif
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/acpi.h>
@@ -51,6 +55,7 @@ MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_DESCRIPTION("ACPI AC Adapter Driver");
 MODULE_LICENSE("GPL");
 
+
 static int acpi_ac_add(struct acpi_device *device);
 static int acpi_ac_remove(struct acpi_device *device);
 static void acpi_ac_notify(struct acpi_device *device, u32 event);
@@ -66,6 +71,13 @@ static int acpi_ac_resume(struct device
 #endif
 static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume);
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
+extern struct proc_dir_entry *acpi_lock_ac_dir(void);
+extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir);
+static int acpi_ac_open_fs(struct inode *inode, struct file *file);
+#endif
+
+
 static int ac_sleep_before_get_state_ms;
 
 static struct acpi_driver acpi_ac_driver = {
@@ -89,6 +101,16 @@ struct acpi_ac {
 
 #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger)
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
+static const struct file_operations acpi_ac_fops = {
+	.owner = THIS_MODULE,
+	.open = acpi_ac_open_fs,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
 /* --------------------------------------------------------------------------
                                AC Adapter Management
    -------------------------------------------------------------------------- */
@@ -141,6 +163,83 @@ static enum power_supply_property ac_pro
 	POWER_SUPPLY_PROP_ONLINE,
 };
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
+/* --------------------------------------------------------------------------
+                              FS Interface (/proc)
+   -------------------------------------------------------------------------- */
+
+static struct proc_dir_entry *acpi_ac_dir;
+
+static int acpi_ac_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_ac *ac = seq->private;
+
+
+	if (!ac)
+		return 0;
+
+	if (acpi_ac_get_state(ac)) {
+		seq_puts(seq, "ERROR: Unable to read AC Adapter state\n");
+		return 0;
+	}
+
+	seq_puts(seq, "state:                   ");
+	switch (ac->state) {
+	case ACPI_AC_STATUS_OFFLINE:
+		seq_puts(seq, "off-line\n");
+		break;
+	case ACPI_AC_STATUS_ONLINE:
+		seq_puts(seq, "on-line\n");
+		break;
+	default:
+		seq_puts(seq, "unknown\n");
+		break;
+	}
+
+	return 0;
+}
+
+static int acpi_ac_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, acpi_ac_seq_show, PDE_DATA(inode));
+}
+
+static int acpi_ac_add_fs(struct acpi_ac *ac)
+{
+	struct proc_dir_entry *entry = NULL;
+
+	printk(KERN_WARNING PREFIX "Deprecated procfs I/F for AC is loaded,"
+			" please retry with CONFIG_ACPI_PROCFS_POWER cleared\n");
+	if (!acpi_device_dir(ac->device)) {
+		acpi_device_dir(ac->device) =
+			proc_mkdir(acpi_device_bid(ac->device), acpi_ac_dir);
+		if (!acpi_device_dir(ac->device))
+			return -ENODEV;
+	}
+
+	/* 'state' [R] */
+	entry = proc_create_data(ACPI_AC_FILE_STATE,
+				 S_IRUGO, acpi_device_dir(ac->device),
+				 &acpi_ac_fops, ac);
+	if (!entry)
+		return -ENODEV;
+	return 0;
+}
+
+static int acpi_ac_remove_fs(struct acpi_ac *ac)
+{
+
+	if (acpi_device_dir(ac->device)) {
+		remove_proc_entry(ACPI_AC_FILE_STATE,
+				  acpi_device_dir(ac->device));
+		remove_proc_entry(acpi_device_bid(ac->device), acpi_ac_dir);
+		acpi_device_dir(ac->device) = NULL;
+	}
+
+	return 0;
+}
+#endif
+
 /* --------------------------------------------------------------------------
                                    Driver Model
    -------------------------------------------------------------------------- */
@@ -221,6 +320,11 @@ static int acpi_ac_add(struct acpi_devic
 		goto end;
 
 	ac->charger.name = acpi_device_bid(device);
+#ifdef CONFIG_ACPI_PROCFS_POWER
+	result = acpi_ac_add_fs(ac);
+	if (result)
+		goto end;
+#endif
 	ac->charger.type = POWER_SUPPLY_TYPE_MAINS;
 	ac->charger.properties = ac_props;
 	ac->charger.num_properties = ARRAY_SIZE(ac_props);
@@ -234,8 +338,12 @@ static int acpi_ac_add(struct acpi_devic
 	       ac->state ? "on-line" : "off-line");
 
 end:
-	if (result)
+	if (result) {
+#ifdef CONFIG_ACPI_PROCFS_POWER
+		acpi_ac_remove_fs(ac);
+#endif
 		kfree(ac);
+	}
 
 	dmi_check_system(ac_dmi_table);
 	return result;
@@ -278,6 +386,10 @@ static int acpi_ac_remove(struct acpi_de
 	if (ac->charger.dev)
 		power_supply_unregister(&ac->charger);
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
+	acpi_ac_remove_fs(ac);
+#endif
+
 	kfree(ac);
 
 	return 0;
@@ -290,9 +402,20 @@ static int __init acpi_ac_init(void)
 	if (acpi_disabled)
 		return -ENODEV;
 
+#ifdef CONFIG_ACPI_PROCFS_POWER
+	acpi_ac_dir = acpi_lock_ac_dir();
+	if (!acpi_ac_dir)
+		return -ENODEV;
+#endif
+
+
 	result = acpi_bus_register_driver(&acpi_ac_driver);
-	if (result < 0)
+	if (result < 0) {
+#ifdef CONFIG_ACPI_PROCFS_POWER
+		acpi_unlock_ac_dir(acpi_ac_dir);
+#endif
 		return -ENODEV;
+	}
 
 	return 0;
 }
@@ -300,6 +423,9 @@ static int __init acpi_ac_init(void)
 static void __exit acpi_ac_exit(void)
 {
 	acpi_bus_unregister_driver(&acpi_ac_driver);
+#ifdef CONFIG_ACPI_PROCFS_POWER
+	acpi_unlock_ac_dir(acpi_ac_dir);
+#endif
 }
 module_init(acpi_ac_init);
 module_exit(acpi_ac_exit);

[PATCH 3.14 20/66] ACPI / resources: only reject zero length resources based at address zero

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Whitcroft <apw@canonical.com>

commit 867f9d463b82462793ea4610e748be0b04b37fc7 upstream.

The recently merged change (in v3.14-rc6) to ACPI resource detection
(below) causes all zero length ACPI resources to be elided from the
table:

  commit b355cee88e3b1a193f0e9a81db810f6f83ad728b
  Author: Zhang Rui <rui.zhang@intel.com>
  Date:   Thu Feb 27 11:37:15 2014 +0800

    ACPI / resources: ignore invalid ACPI device resources

This change has caused a regression in (at least) serial port detection
for a number of machines (see LP#1313981 [1]).  These seem to represent
their IO regions (presumably incorrectly) as a zero length region.
Reverting the above commit restores these serial devices.

Only elide zero length resources which lie at address 0.

Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources)
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/resource.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -77,7 +77,7 @@ bool acpi_dev_resource_memory(struct acp
 	switch (ares->type) {
 	case ACPI_RESOURCE_TYPE_MEMORY24:
 		memory24 = &ares->data.memory24;
-		if (!memory24->address_length)
+		if (!memory24->minimum && !memory24->address_length)
 			return false;
 		acpi_dev_get_memresource(res, memory24->minimum,
 					 memory24->address_length,
@@ -85,7 +85,7 @@ bool acpi_dev_resource_memory(struct acp
 		break;
 	case ACPI_RESOURCE_TYPE_MEMORY32:
 		memory32 = &ares->data.memory32;
-		if (!memory32->address_length)
+		if (!memory32->minimum && !memory32->address_length)
 			return false;
 		acpi_dev_get_memresource(res, memory32->minimum,
 					 memory32->address_length,
@@ -93,7 +93,7 @@ bool acpi_dev_resource_memory(struct acp
 		break;
 	case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
 		fixed_memory32 = &ares->data.fixed_memory32;
-		if (!fixed_memory32->address_length)
+		if (!fixed_memory32->address && !fixed_memory32->address_length)
 			return false;
 		acpi_dev_get_memresource(res, fixed_memory32->address,
 					 fixed_memory32->address_length,
@@ -150,7 +150,7 @@ bool acpi_dev_resource_io(struct acpi_re
 	switch (ares->type) {
 	case ACPI_RESOURCE_TYPE_IO:
 		io = &ares->data.io;
-		if (!io->address_length)
+		if (!io->minimum && !io->address_length)
 			return false;
 		acpi_dev_get_ioresource(res, io->minimum,
 					io->address_length,
@@ -158,7 +158,7 @@ bool acpi_dev_resource_io(struct acpi_re
 		break;
 	case ACPI_RESOURCE_TYPE_FIXED_IO:
 		fixed_io = &ares->data.fixed_io;
-		if (!fixed_io->address_length)
+		if (!fixed_io->address && !fixed_io->address_length)
 			return false;
 		acpi_dev_get_ioresource(res, fixed_io->address,
 					fixed_io->address_length,

[PATCH 3.14 21/66] ACPI / EC: Avoid race condition related to advance_transaction()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lv Zheng <lv.zheng@intel.com>

commit 66b42b78bc1e816f92b662e8888c89195e4199e1 upstream.

The advance_transaction() will be invoked from the IRQ context GPE handler
and the task context ec_poll(). The handling of this function is locked so
that the EC state machine are ensured to be advanced sequentially.

But there is a problem. Before invoking advance_transaction(), EC_SC(R) is
read. Then for advance_transaction(), there could be race condition around
the lock from both contexts. The first one reading the register could fail
this race and when it passes the stale register value to the state machine
advancement code, the hardware condition is totally different from when
the register is read. And the hardware accesses determined from the wrong
hardware status can break the EC state machine. And there could be cases
that the functionalities of the platform firmware are seriously affected.
For example:
 1. When 2 EC_DATA(W) writes compete the IBF=0, the 2nd EC_DATA(W) write may
    be invalid due to IBF=1 after the 1st EC_DATA(W) write. Then the
    hardware will either refuse to respond a next EC_SC(W) write of the next
    command or discard the current WR_EC command when it receives a EC_SC(W)
    write of the next command.
 2. When 1 EC_SC(W) write and 1 EC_DATA(W) write compete the IBF=0, the
    EC_DATA(W) write may be invalid due to IBF=1 after the EC_SC(W) write.
    The next EC_DATA(R) could never be responded by the hardware. This is
    the root cause of the reported issue.

Fix this issue by moving the EC_SC(R) access into the lock so that we can
ensure that the state machine is advanced consistently.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ec.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -168,12 +168,15 @@ static void start_transaction(struct acp
 	acpi_ec_write_cmd(ec, ec->curr->command);
 }
 
-static void advance_transaction(struct acpi_ec *ec, u8 status)
+static void advance_transaction(struct acpi_ec *ec)
 {
 	unsigned long flags;
 	struct transaction *t;
+	u8 status;
 
 	spin_lock_irqsave(&ec->lock, flags);
+	pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK");
+	status = acpi_ec_read_status(ec);
 	t = ec->curr;
 	if (!t)
 		goto unlock;
@@ -236,7 +239,7 @@ static int ec_poll(struct acpi_ec *ec)
 						msecs_to_jiffies(1)))
 					return 0;
 			}
-			advance_transaction(ec, acpi_ec_read_status(ec));
+			advance_transaction(ec);
 		} while (time_before(jiffies, delay));
 		pr_debug("controller reset, restart transaction\n");
 		spin_lock_irqsave(&ec->lock, flags);
@@ -635,11 +638,8 @@ static u32 acpi_ec_gpe_handler(acpi_hand
 	u32 gpe_number, void *data)
 {
 	struct acpi_ec *ec = data;
-	u8 status = acpi_ec_read_status(ec);
-
-	pr_debug("~~~> interrupt, status:0x%02x\n", status);
 
-	advance_transaction(ec, status);
+	advance_transaction(ec);
 	if (ec_transaction_done(ec) &&
 	    (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
 		wake_up(&ec->wait);

[PATCH 3.14 22/66] ACPI / EC: Add asynchronous command byte write support

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lv Zheng <lv.zheng@intel.com>

commit f92fca0060fc4dc9227342d0072d75df98c1e5a5 upstream.

Move the first command byte write into advance_transaction() so that all
EC register accesses that can affect the command processing state machine
can happen in this asynchronous state machine advancement function.

The advance_transaction() function then can be a complete implementation
of an asyncrhonous transaction for a single command so that:
 1. The first command byte can be written in the interrupt context;
 2. The command completion waiter can also be used to wait the first command
    byte's timeout;
 3. In BURST mode, the follow-up command bytes can be written in the
    interrupt context directly, so that it doesn't need to return to the
    task context. Returning to the task context reduces the throughput of
    the BURST mode and in the worst cases where the system workload is very
    high, this leads to the hardware driven automatic BURST mode exit.

In order not to increase memory consumption, convert 'done' into 'flags'
to contain multiple indications:
 1. ACPI_EC_COMMAND_COMPLETE: converting from original 'done' condition,
    indicating the completion of the command transaction.
 2. ACPI_EC_COMMAND_POLL: indicating the availability of writing the first
    command byte. A new command can utilize this flag to compete for the
    right of accessing the underlying hardware. There is a follow-up bug
    fix that has utilized this new flag.

The 2 flags are important because it also reflects a key concept of IO
programs' design used in the system softwares. Normally an IO program
running in the kernel should first be implemented in the asynchronous way.
And the 2 flags are the most common way to implement its synchronous
operations on top of the asynchronous operations:
1. POLL: This flag can be used to block until the asynchronous operations
         can happen.
2. COMPLETE: This flag can be used to block until the asynchronous
             operations have completed.
By constructing code cleanly in this way, many difficult problems can be
solved smoothly.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ec.c |   83 +++++++++++++++++++++++++++++++-----------------------
 1 file changed, 48 insertions(+), 35 deletions(-)

--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -78,6 +78,9 @@ enum {
 	EC_FLAGS_BLOCKED,		/* Transactions are blocked */
 };
 
+#define ACPI_EC_COMMAND_POLL		0x01 /* Available for command byte */
+#define ACPI_EC_COMMAND_COMPLETE	0x02 /* Completed last byte */
+
 /* ec.c is compiled in acpi namespace so this shows up as acpi.ec_delay param */
 static unsigned int ec_delay __read_mostly = ACPI_EC_DELAY;
 module_param(ec_delay, uint, 0644);
@@ -109,7 +112,7 @@ struct transaction {
 	u8 ri;
 	u8 wlen;
 	u8 rlen;
-	bool done;
+	u8 flags;
 };
 
 struct acpi_ec *boot_ec, *first_ec;
@@ -150,63 +153,68 @@ static inline void acpi_ec_write_data(st
 	outb(data, ec->data_addr);
 }
 
-static int ec_transaction_done(struct acpi_ec *ec)
+static int ec_transaction_completed(struct acpi_ec *ec)
 {
 	unsigned long flags;
 	int ret = 0;
 	spin_lock_irqsave(&ec->lock, flags);
-	if (!ec->curr || ec->curr->done)
+	if (!ec->curr || (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE))
 		ret = 1;
 	spin_unlock_irqrestore(&ec->lock, flags);
 	return ret;
 }
 
-static void start_transaction(struct acpi_ec *ec)
-{
-	ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0;
-	ec->curr->done = false;
-	acpi_ec_write_cmd(ec, ec->curr->command);
-}
-
 static void advance_transaction(struct acpi_ec *ec)
 {
-	unsigned long flags;
 	struct transaction *t;
 	u8 status;
 
-	spin_lock_irqsave(&ec->lock, flags);
 	pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK");
 	status = acpi_ec_read_status(ec);
 	t = ec->curr;
 	if (!t)
-		goto unlock;
-	if (t->wlen > t->wi) {
-		if ((status & ACPI_EC_FLAG_IBF) == 0)
-			acpi_ec_write_data(ec,
-				t->wdata[t->wi++]);
-		else
-			goto err;
-	} else if (t->rlen > t->ri) {
-		if ((status & ACPI_EC_FLAG_OBF) == 1) {
-			t->rdata[t->ri++] = acpi_ec_read_data(ec);
-			if (t->rlen == t->ri)
-				t->done = true;
+		goto err;
+	if (t->flags & ACPI_EC_COMMAND_POLL) {
+		if (t->wlen > t->wi) {
+			if ((status & ACPI_EC_FLAG_IBF) == 0)
+				acpi_ec_write_data(ec, t->wdata[t->wi++]);
+			else
+				goto err;
+		} else if (t->rlen > t->ri) {
+			if ((status & ACPI_EC_FLAG_OBF) == 1) {
+				t->rdata[t->ri++] = acpi_ec_read_data(ec);
+				if (t->rlen == t->ri)
+					t->flags |= ACPI_EC_COMMAND_COMPLETE;
+			} else
+				goto err;
+		} else if (t->wlen == t->wi &&
+			   (status & ACPI_EC_FLAG_IBF) == 0)
+			t->flags |= ACPI_EC_COMMAND_COMPLETE;
+		return;
+	} else {
+		if ((status & ACPI_EC_FLAG_IBF) == 0) {
+			acpi_ec_write_cmd(ec, t->command);
+			t->flags |= ACPI_EC_COMMAND_POLL;
 		} else
 			goto err;
-	} else if (t->wlen == t->wi &&
-		   (status & ACPI_EC_FLAG_IBF) == 0)
-		t->done = true;
-	goto unlock;
+		return;
+	}
 err:
 	/*
 	 * If SCI bit is set, then don't think it's a false IRQ
 	 * otherwise will take a not handled IRQ as a false one.
 	 */
-	if (in_interrupt() && !(status & ACPI_EC_FLAG_SCI))
-		++t->irq_count;
+	if (!(status & ACPI_EC_FLAG_SCI)) {
+		if (in_interrupt() && t)
+			++t->irq_count;
+	}
+}
 
-unlock:
-	spin_unlock_irqrestore(&ec->lock, flags);
+static void start_transaction(struct acpi_ec *ec)
+{
+	ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0;
+	ec->curr->flags = 0;
+	advance_transaction(ec);
 }
 
 static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data);
@@ -231,15 +239,17 @@ static int ec_poll(struct acpi_ec *ec)
 			/* don't sleep with disabled interrupts */
 			if (EC_FLAGS_MSI || irqs_disabled()) {
 				udelay(ACPI_EC_MSI_UDELAY);
-				if (ec_transaction_done(ec))
+				if (ec_transaction_completed(ec))
 					return 0;
 			} else {
 				if (wait_event_timeout(ec->wait,
-						ec_transaction_done(ec),
+						ec_transaction_completed(ec),
 						msecs_to_jiffies(1)))
 					return 0;
 			}
+			spin_lock_irqsave(&ec->lock, flags);
 			advance_transaction(ec);
+			spin_unlock_irqrestore(&ec->lock, flags);
 		} while (time_before(jiffies, delay));
 		pr_debug("controller reset, restart transaction\n");
 		spin_lock_irqsave(&ec->lock, flags);
@@ -637,10 +647,13 @@ static int ec_check_sci(struct acpi_ec *
 static u32 acpi_ec_gpe_handler(acpi_handle gpe_device,
 	u32 gpe_number, void *data)
 {
+	unsigned long flags;
 	struct acpi_ec *ec = data;
 
+	spin_lock_irqsave(&ec->lock, flags);
 	advance_transaction(ec);
-	if (ec_transaction_done(ec) &&
+	spin_unlock_irqrestore(&ec->lock, flags);
+	if (ec_transaction_completed(ec) &&
 	    (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
 		wake_up(&ec->wait);
 		ec_check_sci(ec, acpi_ec_read_status(ec));

[PATCH 3.14 23/66] ACPI / EC: Remove duplicated ec_wait_ibf0() waiter

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lv Zheng <lv.zheng@intel.com>

commit 9b80f0f73ae1583c22325ede341c74195847618c upstream.

After we've added the first command byte write into advance_transaction(),
the IBF=0 waiter is duplicated with the command completion waiter
implemented in the ec_poll() because:
   If IBF=1 blocked the first command byte write invoked in the task
   context ec_poll(), it would be kicked off upon IBF=0 interrupt or timed
   out and retried again in the task context.

Remove this seperate and duplicate IBF=0 waiter.  By doing so we can
reduce the overall number of times to access the EC_SC(R) status
register.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ec.c |   27 +--------------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -281,23 +281,6 @@ static int acpi_ec_transaction_unlocked(
 	return ret;
 }
 
-static int ec_check_ibf0(struct acpi_ec *ec)
-{
-	u8 status = acpi_ec_read_status(ec);
-	return (status & ACPI_EC_FLAG_IBF) == 0;
-}
-
-static int ec_wait_ibf0(struct acpi_ec *ec)
-{
-	unsigned long delay = jiffies + msecs_to_jiffies(ec_delay);
-	/* interrupt wait manually if GPE mode is not active */
-	while (time_before(jiffies, delay))
-		if (wait_event_timeout(ec->wait, ec_check_ibf0(ec),
-					msecs_to_jiffies(1)))
-			return 0;
-	return -ETIME;
-}
-
 static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
 {
 	int status;
@@ -318,12 +301,6 @@ static int acpi_ec_transaction(struct ac
 			goto unlock;
 		}
 	}
-	if (ec_wait_ibf0(ec)) {
-		pr_err("input buffer is not empty, "
-				"aborting transaction\n");
-		status = -ETIME;
-		goto end;
-	}
 	pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n",
 			t->command, t->wdata ? t->wdata[0] : 0);
 	/* disable GPE during transaction if storm is detected */
@@ -347,7 +324,6 @@ static int acpi_ec_transaction(struct ac
 		set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
 	}
 	pr_debug("transaction end\n");
-end:
 	if (ec->global_lock)
 		acpi_release_global_lock(glk);
 unlock:
@@ -653,8 +629,7 @@ static u32 acpi_ec_gpe_handler(acpi_hand
 	spin_lock_irqsave(&ec->lock, flags);
 	advance_transaction(ec);
 	spin_unlock_irqrestore(&ec->lock, flags);
-	if (ec_transaction_completed(ec) &&
-	    (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
+	if (ec_transaction_completed(ec)) {
 		wake_up(&ec->wait);
 		ec_check_sci(ec, acpi_ec_read_status(ec));
 	}

[PATCH 3.14 24/66] ACPI / EC: Fix race condition in ec_transaction_completed()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lv Zheng <lv.zheng@intel.com>

commit c0d653412fc8450370167a3268b78fc772ff9c87 upstream.

There is a race condition in ec_transaction_completed().

When ec_transaction_completed() is called in the GPE handler, it could
return true because of (ec->curr == NULL). Then the wake_up() invocation
could complete the next command unexpectedly since there is no lock between
the 2 invocations. With the previous cleanup, the IBF=0 waiter race need
not be handled any more. It's now safe to return a flag from
advance_condition() to indicate the requirement of wakeup, the flag is
returned from a locked context.

The ec_transaction_completed() is now only invoked by the ec_poll() where
the ec->curr is ensured to be different from NULL.

After cleaning up, the EVT_SCI=1 check should be moved out of the wakeup
condition so that an EVT_SCI raised with (ec->curr == NULL) can trigger a
QR_SC command.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ec.c |   30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -158,16 +158,17 @@ static int ec_transaction_completed(stru
 	unsigned long flags;
 	int ret = 0;
 	spin_lock_irqsave(&ec->lock, flags);
-	if (!ec->curr || (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE))
+	if (ec->curr && (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE))
 		ret = 1;
 	spin_unlock_irqrestore(&ec->lock, flags);
 	return ret;
 }
 
-static void advance_transaction(struct acpi_ec *ec)
+static bool advance_transaction(struct acpi_ec *ec)
 {
 	struct transaction *t;
 	u8 status;
+	bool wakeup = false;
 
 	pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK");
 	status = acpi_ec_read_status(ec);
@@ -183,21 +184,25 @@ static void advance_transaction(struct a
 		} else if (t->rlen > t->ri) {
 			if ((status & ACPI_EC_FLAG_OBF) == 1) {
 				t->rdata[t->ri++] = acpi_ec_read_data(ec);
-				if (t->rlen == t->ri)
+				if (t->rlen == t->ri) {
 					t->flags |= ACPI_EC_COMMAND_COMPLETE;
+					wakeup = true;
+				}
 			} else
 				goto err;
 		} else if (t->wlen == t->wi &&
-			   (status & ACPI_EC_FLAG_IBF) == 0)
+			   (status & ACPI_EC_FLAG_IBF) == 0) {
 			t->flags |= ACPI_EC_COMMAND_COMPLETE;
-		return;
+			wakeup = true;
+		}
+		return wakeup;
 	} else {
 		if ((status & ACPI_EC_FLAG_IBF) == 0) {
 			acpi_ec_write_cmd(ec, t->command);
 			t->flags |= ACPI_EC_COMMAND_POLL;
 		} else
 			goto err;
-		return;
+		return wakeup;
 	}
 err:
 	/*
@@ -208,13 +213,14 @@ err:
 		if (in_interrupt() && t)
 			++t->irq_count;
 	}
+	return wakeup;
 }
 
 static void start_transaction(struct acpi_ec *ec)
 {
 	ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0;
 	ec->curr->flags = 0;
-	advance_transaction(ec);
+	(void)advance_transaction(ec);
 }
 
 static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data);
@@ -248,7 +254,7 @@ static int ec_poll(struct acpi_ec *ec)
 					return 0;
 			}
 			spin_lock_irqsave(&ec->lock, flags);
-			advance_transaction(ec);
+			(void)advance_transaction(ec);
 			spin_unlock_irqrestore(&ec->lock, flags);
 		} while (time_before(jiffies, delay));
 		pr_debug("controller reset, restart transaction\n");
@@ -627,12 +633,10 @@ static u32 acpi_ec_gpe_handler(acpi_hand
 	struct acpi_ec *ec = data;
 
 	spin_lock_irqsave(&ec->lock, flags);
-	advance_transaction(ec);
-	spin_unlock_irqrestore(&ec->lock, flags);
-	if (ec_transaction_completed(ec)) {
+	if (advance_transaction(ec))
 		wake_up(&ec->wait);
-		ec_check_sci(ec, acpi_ec_read_status(ec));
-	}
+	spin_unlock_irqrestore(&ec->lock, flags);
+	ec_check_sci(ec, acpi_ec_read_status(ec));
 	return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE;
 }
 

[PATCH 3.14 25/66] powerpc/perf: Never program book3s PMCs with values >= 0x80000000

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit f56029410a13cae3652d1f34788045c40a13ffc7 upstream.

We are seeing a lot of PMU warnings on POWER8:

    Can't find PMC that caused IRQ

Looking closer, the active PMC is 0 at this point and we took a PMU
exception on the transition from negative to 0. Some versions of POWER8
have an issue where they edge detect and not level detect PMC overflows.

A number of places program the PMC with (0x80000000 - period_left),
where period_left can be negative. We can either fix all of these or
just ensure that period_left is always >= 1.

This patch takes the second option.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/perf/core-book3s.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -851,7 +851,22 @@ static void power_pmu_read(struct perf_e
 	} while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
 
 	local64_add(delta, &event->count);
-	local64_sub(delta, &event->hw.period_left);
+
+	/*
+	 * A number of places program the PMC with (0x80000000 - period_left).
+	 * We never want period_left to be less than 1 because we will program
+	 * the PMC with a value >= 0x800000000 and an edge detected PMC will
+	 * roll around to 0 before taking an exception. We have seen this
+	 * on POWER8.
+	 *
+	 * To fix this, clamp the minimum value of period_left to 1.
+	 */
+	do {
+		prev = local64_read(&event->hw.period_left);
+		val = prev - delta;
+		if (val < 1)
+			val = 1;
+	} while (local64_cmpxchg(&event->hw.period_left, prev, val) != prev);
 }
 
 /*

[PATCH 3.14 26/66] powerpc/perf: Add PPMU_ARCH_207S define

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joel Stanley <joel@jms.id.au>

commit 4d9690dd56b0d18f2af8a9d4a279cb205aae3345 upstream.

Instead of separate bits for every POWER8 PMU feature, have a single one
for v2.07 of the architecture.

This saves us adding a MMCR2 define for a future patch.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/perf_event_server.h |    3 +--
 arch/powerpc/perf/core-book3s.c              |    4 ++--
 arch/powerpc/perf/power8-pmu.c               |    2 +-
 3 files changed, 4 insertions(+), 5 deletions(-)

--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -60,8 +60,7 @@ struct power_pmu {
 #define PPMU_SIAR_VALID		0x00000010 /* Processor has SIAR Valid bit */
 #define PPMU_HAS_SSLOT		0x00000020 /* Has sampled slot in MMCRA */
 #define PPMU_HAS_SIER		0x00000040 /* Has SIER */
-#define PPMU_BHRB		0x00000080 /* has BHRB feature enabled */
-#define PPMU_EBB		0x00000100 /* supports event based branch */
+#define PPMU_ARCH_207S		0x00000080 /* PMC is architecture v2.07S */
 
 /*
  * Values for flags to get_alternatives()
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -483,7 +483,7 @@ static bool is_ebb_event(struct perf_eve
 	 * check that the PMU supports EBB, meaning those that don't can still
 	 * use bit 63 of the event code for something else if they wish.
 	 */
-	return (ppmu->flags & PPMU_EBB) &&
+	return (ppmu->flags & PPMU_ARCH_207S) &&
 	       ((event->attr.config >> PERF_EVENT_CONFIG_EBB_SHIFT) & 1);
 }
 
@@ -1563,7 +1563,7 @@ static int power_pmu_event_init(struct p
 
 	if (has_branch_stack(event)) {
 	        /* PMU has BHRB enabled */
-		if (!(ppmu->flags & PPMU_BHRB))
+		if (!(ppmu->flags & PPMU_ARCH_207S))
 			return -EOPNOTSUPP;
 	}
 
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -751,7 +751,7 @@ static struct power_pmu power8_pmu = {
 	.get_constraint		= power8_get_constraint,
 	.get_alternatives	= power8_get_alternatives,
 	.disable_pmc		= power8_disable_pmc,
-	.flags			= PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB,
+	.flags			= PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_ARCH_207S,
 	.n_generic		= ARRAY_SIZE(power8_generic_events),
 	.generic_events		= power8_generic_events,
 	.cache_events		= &power8_cache_events,

[PATCH 3.14 27/66] powerpc/perf: Clear MMCR2 when enabling PMU

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joel Stanley <joel@jms.id.au>

commit b50a6c584bb47b370f84bfd746770c0bbe7129b7 upstream.

On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze
the PMU counters. Aside from on boot they are then never reset,
resulting in stuck perf counters for any user in the guest or host.

We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane
state for perf to use the PMU counters under either the guest or the
host.

This was manifesting as a bug with ppc64_cpu --frequency:

    $ sudo ppc64_cpu --frequency
    WARNING: couldn't run on cpu 0
    WARNING: couldn't run on cpu 8
      ...
    WARNING: couldn't run on cpu 144
    WARNING: couldn't run on cpu 152
    min:    18446744073.710 GHz (cpu -1)
    max:    0.000 GHz (cpu -1)
    avg:    0.000 GHz

The command uses a perf counter to measure CPU cycles over a fixed
amount of time, in order to approximate the frequency of the machine.
The counters were returning zero once a guest was started, regardless of
weather it was still running or had been shut down.

By dumping the value of MMCR2, it was observed that once a guest is
running MMCR2 is set to 1s - which stops counters from running:

    $ sudo sh -c 'echo p > /proc/sysrq-trigger'
    CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6
    PMC1:  5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000
    PMC5:  1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef
    MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000
    MMCR2: fffffffffffffc00 EBBHR: 0000000000000000
    EBBRR: 0000000000000000 BESCR: 0000000000000000
    SIAR:  00000000000a51cc SDAR:  c00000000fc40000 SIER:  0000000001000000

This is done unconditionally in book3s_hv_interrupts.S upon entering the
guest, and the original value is only save/restored if the host has
indicated it was using the PMU. This is okay, however the user of the
PMU needs to ensure that it is in a defined state when it starts using
it.

Fixes: e05b9b9e5c10 ("powerpc/perf: Power8 PMU support")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/perf/core-book3s.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1167,6 +1167,9 @@ static void power_pmu_enable(struct pmu
 
 	write_mmcr0(cpuhw, mmcr0);
 
+	if (ppmu->flags & PPMU_ARCH_207S)
+		mtspr(SPRN_MMCR2, 0);
+
 	/*
 	 * Enable instruction sampling if necessary
 	 */

[PATCH 3.14 28/66] cpufreq: Makefile: fix compilation for davinci platform

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Prabhakar Lad <prabhakar.csengg@gmail.com>

commit 5a90af67c2126fe1d04ebccc1f8177e6ca70d3a9 upstream.

Since commtit 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to
drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850
where as davinci_cpufreq_init() call is used by all davinci platform.

This patch fixes following build error:

arch/arm/mach-davinci/built-in.o: In function `davinci_init_late':
:(.init.text+0x928): undefined reference to `davinci_cpufreq_init'
make: *** [vmlinux] Error 1

Fixes: 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq)
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -47,7 +47,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+=
 # LITTLE drivers, so that it is probed last.
 obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
-obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= davinci-cpufreq.o
+obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o

[PATCH 3.14 29/66] crypto: sha512_ssse3 - fix byte count to bit count conversion

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jussi Kivilinna <jussi.kivilinna@iki.fi>

commit cfe82d4f45c7cc39332a2be7c4c1d3bf279bbd3d upstream.

Byte-to-bit-count computation is only partly converted to big-endian and is
mixing in CPU-endian values. Problem was noticed by sparce with warning:

  CHECK   arch/x86/crypto/sha512_ssse3_glue.c
arch/x86/crypto/sha512_ssse3_glue.c:144:19: warning: restricted __be64 degrades to integer
arch/x86/crypto/sha512_ssse3_glue.c:144:17: warning: incorrect type in assignment (different base types)
arch/x86/crypto/sha512_ssse3_glue.c:144:17:    expected restricted __be64 <noident>
arch/x86/crypto/sha512_ssse3_glue.c:144:17:    got unsigned long long

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/sha512_ssse3_glue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/crypto/sha512_ssse3_glue.c
+++ b/arch/x86/crypto/sha512_ssse3_glue.c
@@ -141,7 +141,7 @@ static int sha512_ssse3_final(struct sha
 
 	/* save number of bits */
 	bits[1] = cpu_to_be64(sctx->count[0] << 3);
-	bits[0] = cpu_to_be64(sctx->count[1] << 3) | sctx->count[0] >> 61;
+	bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61);
 
 	/* Pad out to 112 mod 128 and append length */
 	index = sctx->count[0] & 0x7f;

[PATCH 3.14 30/66] crypto: caam - fix memleak in caam_jr module

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cristian Stoica <cristian.stoica@freescale.com>

commit 0378c9a855bfa395f595fbfb049707093e270f69 upstream.

This patch fixes a memory leak that appears when caam_jr module is unloaded.

Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/caam/jr.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -453,8 +453,8 @@ static int caam_jr_probe(struct platform
 	int error;
 
 	jrdev = &pdev->dev;
-	jrpriv = kmalloc(sizeof(struct caam_drv_private_jr),
-			 GFP_KERNEL);
+	jrpriv = devm_kmalloc(jrdev, sizeof(struct caam_drv_private_jr),
+			      GFP_KERNEL);
 	if (!jrpriv)
 		return -ENOMEM;
 
@@ -487,10 +487,8 @@ static int caam_jr_probe(struct platform
 
 	/* Now do the platform independent part */
 	error = caam_jr_init(jrdev); /* now turn on hardware */
-	if (error) {
-		kfree(jrpriv);
+	if (error)
 		return error;
-	}
 
 	jrpriv->dev = jrdev;
 	spin_lock(&driver_data.jr_alloc_lock);

[PATCH 3.14 31/66] arm64: implement TASK_SIZE_OF

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Cross <ccross@android.com>

commit fa2ec3ea10bd377f9d55772b1dab65178425a1a2 upstream.

include/linux/sched.h implements TASK_SIZE_OF as TASK_SIZE if it
is not set by the architecture headers.  TASK_SIZE uses the
current task to determine the size of the virtual address space.
On a 64-bit kernel this will cause reading /proc/pid/pagemap of a
64-bit process from a 32-bit process to return EOF when it reads
past 0xffffffff.

Implement TASK_SIZE_OF exactly the same as TASK_SIZE with
test_tsk_thread_flag instead of test_thread_flag.

Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/include/asm/memory.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -56,6 +56,8 @@
 #define TASK_SIZE_32		UL(0x100000000)
 #define TASK_SIZE		(test_thread_flag(TIF_32BIT) ? \
 				TASK_SIZE_32 : TASK_SIZE_64)
+#define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk, TIF_32BIT) ? \
+				TASK_SIZE_32 : TASK_SIZE_64)
 #else
 #define TASK_SIZE		TASK_SIZE_64
 #endif /* CONFIG_COMPAT */

[PATCH 3.14 32/66] phy: core: Fix error path in phy_create()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Quadros <rogerq@ti.com>

commit e73b49f1c4e75c44d62585cc3e5b9c7894b61c32 upstream.

Prevent resources from being freed twice in case device_add() call
fails within phy_create(). Also use ida_simple_remove() instead of
ida_remove() as we had used ida_simple_get() to allocate the ida.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/phy/phy-core.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -553,8 +553,9 @@ struct phy *phy_create(struct device *de
 	return phy;
 
 put_dev:
-	put_device(&phy->dev);
-	ida_remove(&phy_ida, phy->id);
+	put_device(&phy->dev);  /* calls phy_release() which frees resources */
+	return ERR_PTR(ret);
+
 free_phy:
 	kfree(phy);
 	return ERR_PTR(ret);
@@ -738,7 +739,7 @@ static void phy_release(struct device *d
 
 	phy = to_phy(dev);
 	dev_vdbg(dev, "releasing '%s'\n", dev_name(dev));
-	ida_remove(&phy_ida, phy->id);
+	ida_simple_remove(&phy_ida, phy->id);
 	kfree(phy);
 }
 

[PATCH 3.14 33/66] clk: spear3xx: Use proper control register offset

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 15ebb05248d025534773c9ef64915bd888f04e4b upstream.

The control register is at offset 0x10, not 0x0. This is wreckaged
since commit 5df33a62c (SPEAr: Switch to common clock framework).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/spear/spear3xx_clock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/spear/spear3xx_clock.c
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -211,7 +211,7 @@ static inline void spear310_clk_init(voi
 /* array of all spear 320 clock lookups */
 #ifdef CONFIG_MACH_SPEAR320
 
-#define SPEAR320_CONTROL_REG		(soc_config_base + 0x0000)
+#define SPEAR320_CONTROL_REG		(soc_config_base + 0x0010)
 #define SPEAR320_EXT_CTRL_REG		(soc_config_base + 0x0018)
 
 	#define SPEAR320_UARTX_PCLK_MASK		0x1

[PATCH 3.14 34/66] clk: s2mps11: Fix double free corruption during driver unbind

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

commit 2a96dfa49c83a2a7cbdb11382976aaa6b2636764 upstream.

After unbinding the driver memory was corrupted by double free of
clk_lookup structure. This lead to OOPS when re-binding the driver
again.

The driver allocated memory for 'clk_lookup' with devm_kzalloc. During
driver removal this memory was freed twice: once by clkdev_drop() and
second by devm code.

Kernel panic log:
[   30.839284] Unable to handle kernel paging request at virtual address 5f343173
[   30.846476] pgd = dee14000
[   30.849165] [5f343173] *pgd=00000000
[   30.852703] Internal error: Oops: 805 [#1] PREEMPT SMP ARM
[   30.858166] Modules linked in:
[   30.861208] CPU: 0 PID: 1 Comm: bash Not tainted 3.16.0-rc2-00239-g94bdf617b07e-dirty #40
[   30.869364] task: df478000 ti: df480000 task.ti: df480000
[   30.874752] PC is at clkdev_add+0x2c/0x38
[   30.878738] LR is at clkdev_add+0x18/0x38
[   30.882732] pc : [<c0350908>]    lr : [<c03508f4>]    psr: 60000013
[   30.882732] sp : df481e78  ip : 00000001  fp : c0700ed8
[   30.894187] r10: 0000000c  r9 : 00000000  r8 : c07b0e3c
[   30.899396] r7 : 00000002  r6 : df45f9d0  r5 : df421390  r4 : c0700d6c
[   30.905906] r3 : 5f343173  r2 : c0700d84  r1 : 60000013  r0 : c0700d6c
[   30.912417] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   30.919534] Control: 10c53c7d  Table: 5ee1406a  DAC: 00000015
[   30.925262] Process bash (pid: 1, stack limit = 0xdf480240)
[   30.930817] Stack: (0xdf481e78 to 0xdf482000)
[   30.935159] 1e60:                                                       00001000 df6de610
[   30.943321] 1e80: df7f4558 c0355650 c05ec6ec c0700eb0 df6de600 df7f4510 dec9d69c 00000014
[   30.951480] 1ea0: 00167b48 df6de610 c0700e30 c0713518 00000000 c0700e30 dec9d69c 00000006
[   30.959639] 1ec0: 00167b48 c02c1b7c c02c1b64 df6de610 c07aff48 c02c0420 c06fb150 c047cc20
[   30.967798] 1ee0: df6de610 df6de610 c0700e30 df6de644 c06fb150 0000000c dec9d690 c02bef90
[   30.975957] 1f00: dec9c6c0 dece4c00 df481f80 dece4c00 0000000c c02be73c 0000000c c016ca8c
[   30.984116] 1f20: c016ca48 00000000 00000000 c016c1f4 00000000 00000000 b6f18000 df481f80
[   30.992276] 1f40: df7f66c0 0000000c df480000 df480000 b6f18000 c011094c df47839c 60000013
[   31.000435] 1f60: 00000000 00000000 df7f66c0 df7f66c0 0000000c df480000 b6f18000 c0110dd4
[   31.008594] 1f80: 00000000 00000000 0000000c b6ec05d8 0000000c b6f18000 00000004 c000f2a8
[   31.016753] 1fa0: 00001000 c000f0e0 b6ec05d8 0000000c 00000001 b6f18000 0000000c 00000000
[   31.024912] 1fc0: b6ec05d8 0000000c b6f18000 00000004 0000000c 00000001 00000000 00167b48
[   31.033071] 1fe0: 00000000 bed83a80 b6e004f0 b6e5122c 60000010 00000001 ffffffff ffffffff
[   31.041248] [<c0350908>] (clkdev_add) from [<c0355650>] (s2mps11_clk_probe+0x2b4/0x3b4)
[   31.049223] [<c0355650>] (s2mps11_clk_probe) from [<c02c1b7c>] (platform_drv_probe+0x18/0x48)
[   31.057728] [<c02c1b7c>] (platform_drv_probe) from [<c02c0420>] (driver_probe_device+0x13c/0x384)
[   31.066579] [<c02c0420>] (driver_probe_device) from [<c02bef90>] (bind_store+0x88/0xd8)
[   31.074564] [<c02bef90>] (bind_store) from [<c02be73c>] (drv_attr_store+0x20/0x2c)
[   31.082118] [<c02be73c>] (drv_attr_store) from [<c016ca8c>] (sysfs_kf_write+0x44/0x48)
[   31.090016] [<c016ca8c>] (sysfs_kf_write) from [<c016c1f4>] (kernfs_fop_write+0xc0/0x17c)
[   31.098176] [<c016c1f4>] (kernfs_fop_write) from [<c011094c>] (vfs_write+0xa0/0x1c4)
[   31.105899] [<c011094c>] (vfs_write) from [<c0110dd4>] (SyS_write+0x40/0x8c)
[   31.112931] [<c0110dd4>] (SyS_write) from [<c000f0e0>] (ret_fast_syscall+0x0/0x3c)
[   31.120481] Code: e2842018 e584501c e1a00004 e885000c (e5835000)
[   31.126596] ---[ end trace efad45bfa3a61b05 ]---
[   31.131181] Kernel panic - not syncing: Fatal exception
[   31.136368] CPU1: stopping
[   31.139054] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D       3.16.0-rc2-00239-g94bdf617b07e-dirty #40
[   31.148697] [<c0016480>] (unwind_backtrace) from [<c0012950>] (show_stack+0x10/0x14)
[   31.156419] [<c0012950>] (show_stack) from [<c0480db8>] (dump_stack+0x80/0xcc)
[   31.163622] [<c0480db8>] (dump_stack) from [<c001499c>] (handle_IPI+0x130/0x15c)
[   31.170998] [<c001499c>] (handle_IPI) from [<c000862c>] (gic_handle_irq+0x60/0x68)
[   31.178549] [<c000862c>] (gic_handle_irq) from [<c0013480>] (__irq_svc+0x40/0x70)
[   31.186009] Exception stack(0xdf4bdf88 to 0xdf4bdfd0)
[   31.191046] df80:                   ffffffed 00000000 00000000 00000000 df4bc000 c06d042c
[   31.199207] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0
[   31.207363] dfc0: c0010324 c0010328 60000013 ffffffff
[   31.212402] [<c0013480>] (__irq_svc) from [<c0010328>] (arch_cpu_idle+0x28/0x30)
[   31.219783] [<c0010328>] (arch_cpu_idle) from [<c005f150>] (cpu_startup_entry+0x2c4/0x3f0)
[   31.228027] [<c005f150>] (cpu_startup_entry) from [<400086c4>] (0x400086c4)
[   31.234968] ---[ end Kernel panic - not syncing: Fatal exception

Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/clk-s2mps11.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -190,16 +190,13 @@ static int s2mps11_clk_probe(struct plat
 			goto err_reg;
 		}
 
-		s2mps11_clk->lookup = devm_kzalloc(&pdev->dev,
-					sizeof(struct clk_lookup), GFP_KERNEL);
+		s2mps11_clk->lookup = clkdev_alloc(s2mps11_clk->clk,
+					s2mps11_name(s2mps11_clk), NULL);
 		if (!s2mps11_clk->lookup) {
 			ret = -ENOMEM;
 			goto err_lup;
 		}
 
-		s2mps11_clk->lookup->con_id = s2mps11_name(s2mps11_clk);
-		s2mps11_clk->lookup->clk = s2mps11_clk->clk;
-
 		clkdev_add(s2mps11_clk->lookup);
 	}
 

[PATCH 3.14 35/66] clk: qcom: HDMI source sel is 3 not 2

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <sboyd@codeaurora.org>

commit c556bcddc78096caeb46dbe3ad0314dd951f1665 upstream.

The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix
the code so that we can properly select the HDMI PLL.

Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)"
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/qcom/mmcc-msm8960.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/qcom/mmcc-msm8960.c
+++ b/drivers/clk/qcom/mmcc-msm8960.c
@@ -1208,7 +1208,7 @@ static struct clk_branch rot_clk = {
 
 static u8 mmcc_pxo_hdmi_map[] = {
 	[P_PXO]		= 0,
-	[P_HDMI_PLL]	= 2,
+	[P_HDMI_PLL]	= 3,
 };
 
 static const char *mmcc_pxo_hdmi[] = {

[PATCH 3.14 36/66] Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "K. Y. Srinivasan" <kys@microsoft.com>

commit affb1aff300ddee54df307812b38f166e8a865ef upstream.

Starting with Win8, we have implemented several optimizations to improve the
scalability and performance of the VMBUS transport between the Host and the
Guest. Some of the non-performance critical services cannot leverage these
optimization since they only read and process one message at a time.
Make adjustments to the callback dispatch code to account for the way
non-performance critical drivers handle reading of the channel.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hv/connection.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -319,9 +319,13 @@ static void process_chn_event(u32 relid)
 		 */
 
 		do {
-			hv_begin_read(&channel->inbound);
+			if (read_state)
+				hv_begin_read(&channel->inbound);
 			channel->onchannel_callback(arg);
-			bytes_to_read = hv_end_read(&channel->inbound);
+			if (read_state)
+				bytes_to_read = hv_end_read(&channel->inbound);
+			else
+				bytes_to_read = 0;
 		} while (read_state && (bytes_to_read != 0));
 	} else {
 		pr_err("no channel callback for relid - %u\n", relid);

[PATCH 3.14 37/66] dm io: fix a race condition in the wake up code for sync_io

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <thornber@redhat.com>

commit 10f1d5d111e8aed46a0f1179faf9a3cf422f689e upstream.

There's a race condition between the atomic_dec_and_test(&io->count)
in dec_count() and the waking of the sync_io() thread.  If the thread
is spuriously woken immediately after the decrement it may exit,
making the on stack io struct invalid, yet the dec_count could still
be using it.

Fix this race by using a completion in sync_io() and dec_count().

Reported-by: Minfei Huang <huangminfei@ucloud.cn>
Signed-off-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-io.c |   22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -10,6 +10,7 @@
 #include <linux/device-mapper.h>
 
 #include <linux/bio.h>
+#include <linux/completion.h>
 #include <linux/mempool.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -32,7 +33,7 @@ struct dm_io_client {
 struct io {
 	unsigned long error_bits;
 	atomic_t count;
-	struct task_struct *sleeper;
+	struct completion *wait;
 	struct dm_io_client *client;
 	io_notify_fn callback;
 	void *context;
@@ -121,8 +122,8 @@ static void dec_count(struct io *io, uns
 			invalidate_kernel_vmap_range(io->vma_invalidate_address,
 						     io->vma_invalidate_size);
 
-		if (io->sleeper)
-			wake_up_process(io->sleeper);
+		if (io->wait)
+			complete(io->wait);
 
 		else {
 			unsigned long r = io->error_bits;
@@ -387,6 +388,7 @@ static int sync_io(struct dm_io_client *
 	 */
 	volatile char io_[sizeof(struct io) + __alignof__(struct io) - 1];
 	struct io *io = (struct io *)PTR_ALIGN(&io_, __alignof__(struct io));
+	DECLARE_COMPLETION_ONSTACK(wait);
 
 	if (num_regions > 1 && (rw & RW_MASK) != WRITE) {
 		WARN_ON(1);
@@ -395,7 +397,7 @@ static int sync_io(struct dm_io_client *
 
 	io->error_bits = 0;
 	atomic_set(&io->count, 1); /* see dispatch_io() */
-	io->sleeper = current;
+	io->wait = &wait;
 	io->client = client;
 
 	io->vma_invalidate_address = dp->vma_invalidate_address;
@@ -403,15 +405,7 @@ static int sync_io(struct dm_io_client *
 
 	dispatch_io(rw, num_regions, where, dp, io, 1);
 
-	while (1) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-
-		if (!atomic_read(&io->count))
-			break;
-
-		io_schedule();
-	}
-	set_current_state(TASK_RUNNING);
+	wait_for_completion_io(&wait);
 
 	if (error_bits)
 		*error_bits = io->error_bits;
@@ -434,7 +428,7 @@ static int async_io(struct dm_io_client
 	io = mempool_alloc(client->pool, GFP_NOIO);
 	io->error_bits = 0;
 	atomic_set(&io->count, 1); /* see dispatch_io() */
-	io->sleeper = NULL;
+	io->wait = NULL;
 	io->client = client;
 	io->callback = fn;
 	io->context = context;

[PATCH 3.14 38/66] dm: allocate a special workqueue for deferred device removal

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit acfe0ad74d2e1bfc81d1d7bf5e15b043985d3650 upstream.

The commit 2c140a246dc ("dm: allow remove to be deferred") introduced a
deferred removal feature for the device mapper.  When this feature is
used (by passing a flag DM_DEFERRED_REMOVE to DM_DEV_REMOVE_CMD ioctl)
and the user tries to remove a device that is currently in use, the
device will be removed automatically in the future when the last user
closes it.

Device mapper used the system workqueue to perform deferred removals.
However, some targets (dm-raid1, dm-mpath, dm-stripe) flush work items
scheduled for the system workqueue from their destructor.  If the
destructor itself is called from the system workqueue during deferred
removal, it introduces a possible deadlock - the workqueue tries to flush
itself.

Fix this possible deadlock by introducing a new workqueue for deferred
removals.  We allocate just one workqueue for all dm targets.  The
ability of dm targets to process IOs isn't dependent on deferred removal
of unused targets, so a deadlock due to shared workqueue isn't possible.

Also, cleanup local_init() to eliminate potential for returning success
on failure.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -54,6 +54,8 @@ static void do_deferred_remove(struct wo
 
 static DECLARE_WORK(deferred_remove_work, do_deferred_remove);
 
+static struct workqueue_struct *deferred_remove_workqueue;
+
 /*
  * For bio-based dm.
  * One of these is allocated per bio.
@@ -283,16 +285,24 @@ static int __init local_init(void)
 	if (r)
 		goto out_free_rq_tio_cache;
 
+	deferred_remove_workqueue = alloc_workqueue("kdmremove", WQ_UNBOUND, 1);
+	if (!deferred_remove_workqueue) {
+		r = -ENOMEM;
+		goto out_uevent_exit;
+	}
+
 	_major = major;
 	r = register_blkdev(_major, _name);
 	if (r < 0)
-		goto out_uevent_exit;
+		goto out_free_workqueue;
 
 	if (!_major)
 		_major = r;
 
 	return 0;
 
+out_free_workqueue:
+	destroy_workqueue(deferred_remove_workqueue);
 out_uevent_exit:
 	dm_uevent_exit();
 out_free_rq_tio_cache:
@@ -306,6 +316,7 @@ out_free_io_cache:
 static void local_exit(void)
 {
 	flush_scheduled_work();
+	destroy_workqueue(deferred_remove_workqueue);
 
 	kmem_cache_destroy(_rq_tio_cache);
 	kmem_cache_destroy(_io_cache);
@@ -414,7 +425,7 @@ static void dm_blk_close(struct gendisk
 
 	if (atomic_dec_and_test(&md->open_count) &&
 	    (test_bit(DMF_DEFERRED_REMOVE, &md->flags)))
-		schedule_work(&deferred_remove_work);
+		queue_work(deferred_remove_workqueue, &deferred_remove_work);
 
 	dm_put(md);
 

[PATCH 3.14 39/66] intel_pstate: Fix setting VID

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dirk Brandewie <dirk.j.brandewie@intel.com>

commit c16ed06024a6e699c332831dd50d8276744e3de8 upstream.

Commit 21855ff5 (intel_pstate: Set turbo VID for BayTrail) introduced
setting the turbo VID which is required to prevent a machine check on
some Baytrail SKUs under heavy graphics based workloads.  The
docmumentation update that brought the requirement to light also
changed the bit mask used for enumerating P state and VID values from
0x7f to 0x3f.

This change returns the mask value to 0x7f.

Tested with the Intel NUC DN2820FYK,
BIOS version FYBYT10H.86A.0034.2014.0513.1413 with v3.16-rc1 and
v3.14.8 kernel versions.

Fixes: 21855ff5 (intel_pstate: Set turbo VID for BayTrail)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77951
Reported-and-tested-by: Rune Reterson <rune@megahurts.dk>
Reported-and-tested-by: Eric Eickmeyer <erich@ericheickmeyer.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/intel_pstate.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -361,21 +361,21 @@ static int byt_get_min_pstate(void)
 {
 	u64 value;
 	rdmsrl(BYT_RATIOS, value);
-	return (value >> 8) & 0x3F;
+	return (value >> 8) & 0x7F;
 }
 
 static int byt_get_max_pstate(void)
 {
 	u64 value;
 	rdmsrl(BYT_RATIOS, value);
-	return (value >> 16) & 0x3F;
+	return (value >> 16) & 0x7F;
 }
 
 static int byt_get_turbo_pstate(void)
 {
 	u64 value;
 	rdmsrl(BYT_TURBO_RATIOS, value);
-	return value & 0x3F;
+	return value & 0x7F;
 }
 
 static void byt_set_pstate(struct cpudata *cpudata, int pstate)
@@ -409,8 +409,8 @@ static void byt_get_vid(struct cpudata *
 
 
 	rdmsrl(BYT_VIDS, value);
-	cpudata->vid.min = int_tofp((value >> 8) & 0x3f);
-	cpudata->vid.max = int_tofp((value >> 16) & 0x3f);
+	cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
+	cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
 	cpudata->vid.ratio = div_fp(
 		cpudata->vid.max - cpudata->vid.min,
 		int_tofp(cpudata->pstate.max_pstate -

[PATCH 3.14 40/66] intel_pstate: dont touch turbo bit if turbo disabled or unavailable.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dirk Brandewie <dirk.j.brandewie@intel.com>

commit dd5fbf70f96dbfd7ee432096a1f979b2b3267856 upstream.

If turbo is disabled in the BIOS bit 38 should be set in
MSR_IA32_MISC_ENABLE register per section 14.3.2.1 of the SDM Vol 3
document 325384-050US Feb 2014.  If this bit is set do *not* attempt
to disable trubo via the MSR_IA32_PERF_CTL register.  On some systems
trying to disable turbo via MSR_IA32_PERF_CTL will cause subsequent
writes to MSR_IA32_PERF_CTL not take affect, in fact reading
MSR_IA32_PERF_CTL will not show the IDA/Turbo DISENGAGE bit(32) as
set. A write of bit 32 to zero returns to normal operation.

Also deal with the case where the processor does not support
turbo and the BIOS does not report the fact in MSR_IA32_MISC_ENABLE
but does report the max and turbo P states as the same value.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=64251
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/intel_pstate.c |   22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -132,6 +132,7 @@ static struct pstate_funcs pstate_funcs;
 
 struct perf_limits {
 	int no_turbo;
+	int turbo_disabled;
 	int max_perf_pct;
 	int min_perf_pct;
 	int32_t max_perf;
@@ -291,7 +292,10 @@ static ssize_t store_no_turbo(struct kob
 	if (ret != 1)
 		return -EINVAL;
 	limits.no_turbo = clamp_t(int, input, 0 , 1);
-
+	if (limits.turbo_disabled) {
+		pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
+		limits.no_turbo = limits.turbo_disabled;
+	}
 	return count;
 }
 
@@ -385,7 +389,7 @@ static void byt_set_pstate(struct cpudat
 	u32 vid;
 
 	val = pstate << 8;
-	if (limits.no_turbo)
+	if (limits.no_turbo && !limits.turbo_disabled)
 		val |= (u64)1 << 32;
 
 	vid_fp = cpudata->vid.min + mul_fp(
@@ -452,7 +456,7 @@ static void core_set_pstate(struct cpuda
 	u64 val;
 
 	val = pstate << 8;
-	if (limits.no_turbo)
+	if (limits.no_turbo && !limits.turbo_disabled)
 		val |= (u64)1 << 32;
 
 	wrmsrl(MSR_IA32_PERF_CTL, val);
@@ -750,7 +754,7 @@ static int intel_pstate_set_policy(struc
 		limits.min_perf = int_tofp(1);
 		limits.max_perf_pct = 100;
 		limits.max_perf = int_tofp(1);
-		limits.no_turbo = 0;
+		limits.no_turbo = limits.turbo_disabled;
 		return 0;
 	}
 	limits.min_perf_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
@@ -790,6 +794,7 @@ static int intel_pstate_cpu_init(struct
 {
 	struct cpudata *cpu;
 	int rc;
+	u64 misc_en;
 
 	rc = intel_pstate_init_cpu(policy->cpu);
 	if (rc)
@@ -797,8 +802,13 @@ static int intel_pstate_cpu_init(struct
 
 	cpu = all_cpu_data[policy->cpu];
 
-	if (!limits.no_turbo &&
-		limits.min_perf_pct == 100 && limits.max_perf_pct == 100)
+	rdmsrl(MSR_IA32_MISC_ENABLE, misc_en);
+	if (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE ||
+		cpu->pstate.max_pstate == cpu->pstate.turbo_pstate) {
+		limits.turbo_disabled = 1;
+		limits.no_turbo = 1;
+	}
+	if (limits.min_perf_pct == 100 && limits.max_perf_pct == 100)
 		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
 	else
 		policy->policy = CPUFREQ_POLICY_POWERSAVE;

[PATCH 3.14 41/66] intel_pstate: Update documentation of {max,min}_perf_pct sysfs files

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dirk Brandewie <dirk.j.brandewie@intel.com>

commit 41629a8233470325bfbb60377f555f9e8acc879f upstream.

Update documentation to make the interpretation of the values clearer

Link: https://bugzilla.kernel.org/show_bug.cgi?id=64251
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/cpu-freq/intel-pstate.txt |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/Documentation/cpu-freq/intel-pstate.txt
+++ b/Documentation/cpu-freq/intel-pstate.txt
@@ -15,10 +15,13 @@ New sysfs files for controlling P state
 /sys/devices/system/cpu/intel_pstate/
 
       max_perf_pct: limits the maximum P state that will be requested by
-      the driver stated as a percentage of the available performance.
+      the driver stated as a percentage of the available performance. The
+      available (P states) performance may be reduced by the no_turbo
+      setting described below.
 
       min_perf_pct: limits the minimum P state that will be  requested by
-      the driver stated as a percentage of the available performance.
+      the driver stated as a percentage of the max (non-turbo)
+      performance level.
 
       no_turbo: limits the driver to selecting P states below the turbo
       frequency range.

[PATCH 3.14 42/66] intel_pstate: Set CPU number before accessing MSRs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vincent Minet <vincent@vincent-minet.net>

commit 179e8471673ce0249cd4ecda796008f7757e5bad upstream.

Ensure that cpu->cpu is set before writing MSR_IA32_PERF_CTL during CPU
initialization. Otherwise only cpu0 has its P-state set and all other
cores are left with their values unchanged.

In most cases, this is not too serious because the P-states will be set
correctly when the timer function is run.  But when the default governor
is set to performance, the per-CPU current_pstate stays the same forever
and no attempts are made to write the MSRs again.

Signed-off-by: Vincent Minet <vincent@vincent-minet.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/intel_pstate.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -709,9 +709,8 @@ static int intel_pstate_init_cpu(unsigne
 
 	cpu = all_cpu_data[cpunum];
 
-	intel_pstate_get_cpu_pstates(cpu);
-
 	cpu->cpu = cpunum;
+	intel_pstate_get_cpu_pstates(cpu);
 
 	init_timer_deferrable(&cpu->timer);
 	cpu->timer.function = intel_pstate_timer_func;

[PATCH 3.14 43/66] PCI: Fix unaligned access in AF transaction pending test

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit d066c946a866268c14a120b33e7226e899981998 upstream.

pci_wait_for_pending() uses word access, so we shouldn't be passing
an offset that is only byte aligned.  Use the control register offset
instead, shifting the mask to match.

Fixes: d0b4cc4e3270 ("PCI: Wrong register used to check pending traffic")
Fixes: 157e876ffe0b ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction())
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pci.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3085,8 +3085,13 @@ static int pci_af_flr(struct pci_dev *de
 	if (probe)
 		return 0;
 
-	/* Wait for Transaction Pending bit clean */
-	if (pci_wait_for_pending(dev, pos + PCI_AF_STATUS, PCI_AF_STATUS_TP))
+	/*
+	 * Wait for Transaction Pending bit to clear.  A word-aligned test
+	 * is used, so we use the conrol offset rather than status and shift
+	 * the test bit to match.
+	 */
+	if (pci_wait_for_pending(dev, pos + PCI_AF_CTRL,
+				 PCI_AF_STATUS_TP << 8))
 		goto clear;
 
 	dev_err(&dev->dev, "transaction is not cleared; "

[PATCH 3.14 44/66] ext4: fix unjournalled bg descriptor while initializing inode bitmap

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 61c219f5814277ecb71d64cb30297028d6665979 upstream.

The first time that we allocate from an uninitialized inode allocation
bitmap, if the block allocation bitmap is also uninitalized, we need
to get write access to the block group descriptor before we start
modifying the block group descriptor flags and updating the free block
count, etc.  Otherwise, there is the potential of a bad journal
checksum (if journal checksums are enabled), and of the file system
becoming inconsistent if we crash at exactly the wrong time.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ialloc.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -851,6 +851,13 @@ got:
 		goto out;
 	}
 
+	BUFFER_TRACE(group_desc_bh, "get_write_access");
+	err = ext4_journal_get_write_access(handle, group_desc_bh);
+	if (err) {
+		ext4_std_error(sb, err);
+		goto out;
+	}
+
 	/* We may have to initialize the block bitmap if it isn't already */
 	if (ext4_has_group_desc_csum(sb) &&
 	    gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
@@ -887,13 +894,6 @@ got:
 		}
 	}
 
-	BUFFER_TRACE(group_desc_bh, "get_write_access");
-	err = ext4_journal_get_write_access(handle, group_desc_bh);
-	if (err) {
-		ext4_std_error(sb, err);
-		goto out;
-	}
-
 	/* Update the relevant bg descriptor fields */
 	if (ext4_has_group_desc_csum(sb)) {
 		int free;

[PATCH 3.14 45/66] ext4: clarify error count warning messages

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit ae0f78de2c43b6fadd007c231a352b13b5be8ed2 upstream.

Make it clear that values printed are times, and that it is error
since last fsck. Also add note about fsck version required.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2793,10 +2793,11 @@ static void print_daily_error_info(unsig
 	es = sbi->s_es;
 
 	if (es->s_error_count)
-		ext4_msg(sb, KERN_NOTICE, "error count: %u",
+		/* fsck newer than v1.41.13 is needed to clean this condition. */
+		ext4_msg(sb, KERN_NOTICE, "error count since last fsck: %u",
 			 le32_to_cpu(es->s_error_count));
 	if (es->s_first_error_time) {
-		printk(KERN_NOTICE "EXT4-fs (%s): initial error at %u: %.*s:%d",
+		printk(KERN_NOTICE "EXT4-fs (%s): initial error at time %u: %.*s:%d",
 		       sb->s_id, le32_to_cpu(es->s_first_error_time),
 		       (int) sizeof(es->s_first_error_func),
 		       es->s_first_error_func,
@@ -2810,7 +2811,7 @@ static void print_daily_error_info(unsig
 		printk("\n");
 	}
 	if (es->s_last_error_time) {
-		printk(KERN_NOTICE "EXT4-fs (%s): last error at %u: %.*s:%d",
+		printk(KERN_NOTICE "EXT4-fs (%s): last error at time %u: %.*s:%d",
 		       sb->s_id, le32_to_cpu(es->s_last_error_time),
 		       (int) sizeof(es->s_last_error_func),
 		       es->s_last_error_func,

[PATCH 3.14 46/66] ext4: clarify ext4_error message in ext4_mb_generate_buddy_error()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 94d4c066a4ff170a2671b1a9b153febbf36796f6 upstream.

We are spending a lot of time explaining to users what this error
means.  Let's try to improve the message to avoid this problem.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/mballoc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -751,8 +751,8 @@ void ext4_mb_generate_buddy(struct super
 
 	if (free != grp->bb_free) {
 		ext4_grp_locked_error(sb, group, 0, 0,
-				      "%u clusters in bitmap, %u in gd; "
-				      "block bitmap corrupt.",
+				      "block bitmap and bg descriptor "
+				      "inconsistent: %u vs %u free clusters",
 				      free, grp->bb_free);
 		/*
 		 * If we intend to continue, we consider group descriptor

[PATCH 3.14 47/66] ext4: disable synchronous transaction batching if max_batch_time==0

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Sandeen <sandeen@redhat.com>

commit 5dd214248f94d430d70e9230bda72f2654ac88a8 upstream.

The mount manpage says of the max_batch_time option,

	This optimization can be turned off entirely
	by setting max_batch_time to 0.

But the code doesn't do that.  So fix the code to do
that.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c       |    2 --
 fs/jbd2/transaction.c |    5 ++++-
 2 files changed, 4 insertions(+), 3 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1519,8 +1519,6 @@ static int handle_mount_opt(struct super
 			arg = JBD2_DEFAULT_MAX_COMMIT_AGE;
 		sbi->s_commit_interval = HZ * arg;
 	} else if (token == Opt_max_batch_time) {
-		if (arg == 0)
-			arg = EXT4_DEF_MAX_BATCH_TIME;
 		sbi->s_max_batch_time = arg;
 	} else if (token == Opt_min_batch_time) {
 		sbi->s_min_batch_time = arg;
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1590,9 +1590,12 @@ int jbd2_journal_stop(handle_t *handle)
 	 * to perform a synchronous write.  We do this to detect the
 	 * case where a single process is doing a stream of sync
 	 * writes.  No point in waiting for joiners in that case.
+	 *
+	 * Setting max_batch_time to 0 disables this completely.
 	 */
 	pid = current->pid;
-	if (handle->h_sync && journal->j_last_sync_writer != pid) {
+	if (handle->h_sync && journal->j_last_sync_writer != pid &&
+	    journal->j_max_batch_time) {
 		u64 commit_time, trans_time;
 
 		journal->j_last_sync_writer = pid;

[PATCH 3.14 48/66] ext4: fix a potential deadlock in __ext4_es_shrink()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 3f1f9b851311a76226140b55b1ea22111234a7c2 upstream.

This fixes the following lockdep complaint:

[ INFO: possible circular locking dependency detected ]
3.16.0-rc2-mm1+ #7 Tainted: G           O
-------------------------------------------------------
kworker/u24:0/4356 is trying to acquire lock:
 (&(&sbi->s_es_lru_lock)->rlock){+.+.-.}, at: [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0

but task is already holding lock:
 (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180

which lock already depends on the new lock.

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&ei->i_es_lock);
                               lock(&(&sbi->s_es_lru_lock)->rlock);
                               lock(&ei->i_es_lock);
  lock(&(&sbi->s_es_lru_lock)->rlock);

 *** DEADLOCK ***

6 locks held by kworker/u24:0/4356:
 #0:  ("writeback"){.+.+.+}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560
 #1:  ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560
 #2:  (&type->s_umount_key#22){++++++}, at: [<ffffffff811a9c74>] grab_super_passive+0x44/0x90
 #3:  (jbd2_handle){+.+...}, at: [<ffffffff812979f9>] start_this_handle+0x189/0x5f0
 #4:  (&ei->i_data_sem){++++..}, at: [<ffffffff81247062>] ext4_map_blocks+0x132/0x550
 #5:  (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180

stack backtrace:
CPU: 0 PID: 4356 Comm: kworker/u24:0 Tainted: G           O   3.16.0-rc2-mm1+ #7
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: writeback bdi_writeback_workfn (flush-253:0)
 ffffffff8213dce0 ffff880014b07538 ffffffff815df0bb 0000000000000007
 ffffffff8213e040 ffff880014b07588 ffffffff815db3dd ffff880014b07568
 ffff880014b07610 ffff88003b868930 ffff88003b868908 ffff88003b868930
Call Trace:
 [<ffffffff815df0bb>] dump_stack+0x4e/0x68
 [<ffffffff815db3dd>] print_circular_bug+0x1fb/0x20c
 [<ffffffff810a7a3e>] __lock_acquire+0x163e/0x1d00
 [<ffffffff815e89dc>] ? retint_restore_args+0xe/0xe
 [<ffffffff815ddc7b>] ? __slab_alloc+0x4a8/0x4ce
 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0
 [<ffffffff810a8707>] lock_acquire+0x87/0x120
 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0
 [<ffffffff8128592d>] ? ext4_es_free_extent+0x5d/0x70
 [<ffffffff815e6f09>] _raw_spin_lock+0x39/0x50
 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0
 [<ffffffff8119760b>] ? kmem_cache_alloc+0x18b/0x1a0
 [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0
 [<ffffffff812869b8>] ext4_es_insert_extent+0xc8/0x180
 [<ffffffff812470f4>] ext4_map_blocks+0x1c4/0x550
 [<ffffffff8124c4c4>] ext4_writepages+0x6d4/0xd00
	...

Reported-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Minchan Kim <minchan@kernel.org>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/extents_status.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/ext4/extents_status.c
+++ b/fs/ext4/extents_status.c
@@ -962,10 +962,10 @@ retry:
 			continue;
 		}
 
-		if (ei->i_es_lru_nr == 0 || ei == locked_ei)
+		if (ei->i_es_lru_nr == 0 || ei == locked_ei ||
+		    !write_trylock(&ei->i_es_lock))
 			continue;
 
-		write_lock(&ei->i_es_lock);
 		shrunk = __es_try_to_reclaim_extents(ei, nr_to_scan);
 		if (ei->i_es_lru_nr == 0)
 			list_del_init(&ei->i_es_lru);

[PATCH 3.14 49/66] drm/radeon/dpm: Reenabling SS on Cayman

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Demers <alexandre.f.demers@gmail.com>

commit 41959341ac7e33dd360c7a881d13566f9eca37b2 upstream.

It reverts commit c745fe611ca42295c9d91d8e305d27983e9132ef now that
Cayman is stable since VDDCI fix. Spread spectrum was not the culprit.

This depends on b0880e87c1fd038b84498944f52e52c3e86ebe59
(drm/radeon/dpm: fix vddci setup typo on cayman).

Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/rv770_dpm.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/drivers/gpu/drm/radeon/rv770_dpm.c
+++ b/drivers/gpu/drm/radeon/rv770_dpm.c
@@ -2332,12 +2332,6 @@ void rv770_get_engine_memory_ss(struct r
 	pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss,
 						       ASIC_INTERNAL_MEMORY_SS, 0);
 
-	/* disable ss, causes hangs on some cayman boards */
-	if (rdev->family == CHIP_CAYMAN) {
-		pi->sclk_ss = false;
-		pi->mclk_ss = false;
-	}
-
 	if (pi->sclk_ss || pi->mclk_ss)
 		pi->dynamic_ss = true;
 	else

[PATCH 3.14 50/66] drm/radeon: fix typo in ci_stop_dpm()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit ed96377132e564d797c48a5490fd46bed01c4273 upstream.

Need to use the RREG32_SMC() accessor since the register
is an smc indirect index.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/ci_dpm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -1161,7 +1161,7 @@ static int ci_stop_dpm(struct radeon_dev
 	tmp &= ~GLOBAL_PWRMGT_EN;
 	WREG32_SMC(GENERAL_PWRMGT, tmp);
 
-	tmp = RREG32(SCLK_PWRMGT_CNTL);
+	tmp = RREG32_SMC(SCLK_PWRMGT_CNTL);
 	tmp &= ~DYNAMIC_PM_EN;
 	WREG32_SMC(SCLK_PWRMGT_CNTL, tmp);
 

[PATCH 3.14 51/66] drm/radeon: fix typo in golden register setup on evergreen

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 6abafb78f9881b4891baf74ab4e9f090ae45230e upstream.

Fixes hangs on driver load on some cards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76998

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/evergreen.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -189,7 +189,7 @@ static const u32 evergreen_golden_regist
 	0x8c1c, 0xffffffff, 0x00001010,
 	0x28350, 0xffffffff, 0x00000000,
 	0xa008, 0xffffffff, 0x00010000,
-	0x5cc, 0xffffffff, 0x00000001,
+	0x5c4, 0xffffffff, 0x00000001,
 	0x9508, 0xffffffff, 0x00000002,
 	0x913c, 0x0000000f, 0x0000000a
 };
@@ -476,7 +476,7 @@ static const u32 cedar_golden_registers[
 	0x8c1c, 0xffffffff, 0x00001010,
 	0x28350, 0xffffffff, 0x00000000,
 	0xa008, 0xffffffff, 0x00010000,
-	0x5cc, 0xffffffff, 0x00000001,
+	0x5c4, 0xffffffff, 0x00000001,
 	0x9508, 0xffffffff, 0x00000002
 };
 
@@ -635,7 +635,7 @@ static const u32 juniper_mgcg_init[] =
 static const u32 supersumo_golden_registers[] =
 {
 	0x5eb4, 0xffffffff, 0x00000002,
-	0x5cc, 0xffffffff, 0x00000001,
+	0x5c4, 0xffffffff, 0x00000001,
 	0x7030, 0xffffffff, 0x00000011,
 	0x7c30, 0xffffffff, 0x00000011,
 	0x6104, 0x01000300, 0x00000000,
@@ -719,7 +719,7 @@ static const u32 sumo_golden_registers[]
 static const u32 wrestler_golden_registers[] =
 {
 	0x5eb4, 0xffffffff, 0x00000002,
-	0x5cc, 0xffffffff, 0x00000001,
+	0x5c4, 0xffffffff, 0x00000001,
 	0x7030, 0xffffffff, 0x00000011,
 	0x7c30, 0xffffffff, 0x00000011,
 	0x6104, 0x01000300, 0x00000000,

[PATCH 3.14 54/66] DMA, CMA: fix possible memory leak

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joonsoo Kim <iamjoonsoo.kim@lge.com>

commit fe8eea4f4a3f299ef83ed090d5354698ebe4fda8 upstream.

We should free memory for bitmap when we find zone mismatch, otherwise
this memory will leak.

Additionally, I copy code comment from PPC KVM's CMA code to inform why
we need to check zone mis-match.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: Michal Nazarewicz <mina86@mina86.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/base/dma-contiguous.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/base/dma-contiguous.c
+++ b/drivers/base/dma-contiguous.c
@@ -155,13 +155,23 @@ static int __init cma_activate_area(stru
 		base_pfn = pfn;
 		for (j = pageblock_nr_pages; j; --j, pfn++) {
 			WARN_ON_ONCE(!pfn_valid(pfn));
+			/*
+			 * alloc_contig_range requires the pfn range
+			 * specified to be in the same zone. Make this
+			 * simple by forcing the entire CMA resv range
+			 * to be in the same zone.
+			 */
 			if (page_zone(pfn_to_page(pfn)) != zone)
-				return -EINVAL;
+				goto err;
 		}
 		init_cma_reserved_pageblock(pfn_to_page(base_pfn));
 	} while (--i);
 
 	return 0;
+
+err:
+	kfree(cma->bitmap);
+	return -EINVAL;
 }
 
 static struct cma cma_areas[MAX_CMA_AREAS];

[PATCH 3.14 55/66] ring-buffer: Check if buffer exists before polling

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit 8b8b36834d0fff67fc8668093f4312dd04dcf21d upstream.

The per_cpu buffers are created one per possible CPU. But these do
not mean that those CPUs are online, nor do they even exist.

With the addition of the ring buffer polling, it assumes that the
caller polls on an existing buffer. But this is not the case if
the user reads trace_pipe from a CPU that does not exist, and this
causes the kernel to crash.

Simple fix is to check the cpu against buffer bitmask against to see
if the buffer was allocated or not and return -ENODEV if it is
not.

More updates were done to pass the -ENODEV back up to userspace.

Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.com

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/ring_buffer.h |    2 +-
 kernel/trace/ring_buffer.c  |    5 ++++-
 kernel/trace/trace.c        |   25 ++++++++++++++++++-------
 kernel/trace/trace.h        |    4 ++--
 4 files changed, 25 insertions(+), 11 deletions(-)

--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -97,7 +97,7 @@ __ring_buffer_alloc(unsigned long size,
 	__ring_buffer_alloc((size), (flags), &__key);	\
 })
 
-void ring_buffer_wait(struct ring_buffer *buffer, int cpu);
+int ring_buffer_wait(struct ring_buffer *buffer, int cpu);
 int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu,
 			  struct file *filp, poll_table *poll_table);
 
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -543,7 +543,7 @@ static void rb_wake_up_waiters(struct ir
  * as data is added to any of the @buffer's cpu buffers. Otherwise
  * it will wait for data to be added to a specific cpu buffer.
  */
-void ring_buffer_wait(struct ring_buffer *buffer, int cpu)
+int ring_buffer_wait(struct ring_buffer *buffer, int cpu)
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
 	DEFINE_WAIT(wait);
@@ -557,6 +557,8 @@ void ring_buffer_wait(struct ring_buffer
 	if (cpu == RING_BUFFER_ALL_CPUS)
 		work = &buffer->irq_work;
 	else {
+		if (!cpumask_test_cpu(cpu, buffer->cpumask))
+			return -ENODEV;
 		cpu_buffer = buffer->buffers[cpu];
 		work = &cpu_buffer->irq_work;
 	}
@@ -591,6 +593,7 @@ void ring_buffer_wait(struct ring_buffer
 		schedule();
 
 	finish_wait(&work->waiters, &wait);
+	return 0;
 }
 
 /**
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1091,13 +1091,13 @@ update_max_tr_single(struct trace_array
 }
 #endif /* CONFIG_TRACER_MAX_TRACE */
 
-static void default_wait_pipe(struct trace_iterator *iter)
+static int default_wait_pipe(struct trace_iterator *iter)
 {
 	/* Iterators are static, they should be filled or empty */
 	if (trace_buffer_iter(iter, iter->cpu_file))
-		return;
+		return 0;
 
-	ring_buffer_wait(iter->trace_buffer->buffer, iter->cpu_file);
+	return ring_buffer_wait(iter->trace_buffer->buffer, iter->cpu_file);
 }
 
 #ifdef CONFIG_FTRACE_STARTUP_TEST
@@ -4160,17 +4160,19 @@ tracing_poll_pipe(struct file *filp, pol
  *
  *     Anyway, this is really very primitive wakeup.
  */
-void poll_wait_pipe(struct trace_iterator *iter)
+int poll_wait_pipe(struct trace_iterator *iter)
 {
 	set_current_state(TASK_INTERRUPTIBLE);
 	/* sleep for 100 msecs, and try again. */
 	schedule_timeout(HZ / 10);
+	return 0;
 }
 
 /* Must be called with trace_types_lock mutex held. */
 static int tracing_wait_pipe(struct file *filp)
 {
 	struct trace_iterator *iter = filp->private_data;
+	int ret;
 
 	while (trace_empty(iter)) {
 
@@ -4180,10 +4182,13 @@ static int tracing_wait_pipe(struct file
 
 		mutex_unlock(&iter->mutex);
 
-		iter->trace->wait_pipe(iter);
+		ret = iter->trace->wait_pipe(iter);
 
 		mutex_lock(&iter->mutex);
 
+		if (ret)
+			return ret;
+
 		if (signal_pending(current))
 			return -EINTR;
 
@@ -5111,8 +5116,12 @@ tracing_buffers_read(struct file *filp,
 				goto out_unlock;
 			}
 			mutex_unlock(&trace_types_lock);
-			iter->trace->wait_pipe(iter);
+			ret = iter->trace->wait_pipe(iter);
 			mutex_lock(&trace_types_lock);
+			if (ret) {
+				size = ret;
+				goto out_unlock;
+			}
 			if (signal_pending(current)) {
 				size = -EINTR;
 				goto out_unlock;
@@ -5324,8 +5333,10 @@ tracing_buffers_splice_read(struct file
 			goto out;
 		}
 		mutex_unlock(&trace_types_lock);
-		iter->trace->wait_pipe(iter);
+		ret = iter->trace->wait_pipe(iter);
 		mutex_lock(&trace_types_lock);
+		if (ret)
+			goto out;
 		if (signal_pending(current)) {
 			ret = -EINTR;
 			goto out;
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -336,7 +336,7 @@ struct tracer {
 	void			(*stop)(struct trace_array *tr);
 	void			(*open)(struct trace_iterator *iter);
 	void			(*pipe_open)(struct trace_iterator *iter);
-	void			(*wait_pipe)(struct trace_iterator *iter);
+	int			(*wait_pipe)(struct trace_iterator *iter);
 	void			(*close)(struct trace_iterator *iter);
 	void			(*pipe_close)(struct trace_iterator *iter);
 	ssize_t			(*read)(struct trace_iterator *iter,
@@ -552,7 +552,7 @@ void trace_init_global_iter(struct trace
 
 void tracing_iter_reset(struct trace_iterator *iter, int cpu);
 
-void poll_wait_pipe(struct trace_iterator *iter);
+int poll_wait_pipe(struct trace_iterator *iter);
 
 void tracing_sched_switch_trace(struct trace_array *tr,
 				struct task_struct *prev,

[PATCH 3.14 56/66] drivers/rtc/rtc-puv3.c: remove "&dev->" for typo issue

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Gang <gang.chen.5i5j@gmail.com>

commit 73fa540618d8b1f8c2266934f23bd84bb9e28d9e upstream.

It is only a typo issue, the related commit:

  "1fbc4c4 drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()"

The related error (for unicore32 with allmodconfig):

    CC [M]  drivers/rtc/rtc-puv3.o
  drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setalarm':
  drivers/rtc/rtc-puv3.c:143: error: 'struct device' has no member named 'dev'

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-puv3.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/rtc/rtc-puv3.c
+++ b/drivers/rtc/rtc-puv3.c
@@ -140,7 +140,7 @@ static int puv3_rtc_setalarm(struct devi
 	rtc_tm_to_time(tm, &rtcalarm_count);
 	writel(rtcalarm_count, RTC_RTAR);
 
-	puv3_rtc_setaie(&dev->dev, alrm->enabled);
+	puv3_rtc_setaie(dev, alrm->enabled);
 
 	if (alrm->enabled)
 		enable_irq_wake(puv3_rtc_alarmno);

[PATCH 3.14 57/66] drivers/rtc/rtc-puv3.c: use dev_dbg() instead of dev_debug() for typo issue

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Gang <gang.chen.5i5j@gmail.com>

commit c863810cefc7ffd782e5648a21bfb36a32c8b081 upstream.

It is only a typo issue, the related commit:

  "1fbc4c4 drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()"

The related error (unicore32 with allmodconfig):

    CC [M]  drivers/rtc/rtc-puv3.o
  drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setpie':
  drivers/rtc/rtc-puv3.c:74: error: implicit declaration of function 'dev_debug'

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-puv3.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/rtc/rtc-puv3.c
+++ b/drivers/rtc/rtc-puv3.c
@@ -71,7 +71,7 @@ static int puv3_rtc_setpie(struct device
 {
 	unsigned int tmp;
 
-	dev_debug(dev, "%s: pie=%d\n", __func__, enabled);
+	dev_dbg(dev, "%s: pie=%d\n", __func__, enabled);
 
 	spin_lock_irq(&puv3_rtc_pie_lock);
 	tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE;

[PATCH 3.14 58/66] powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit fb43e8477ed9006c4f397f904c691a120503038c upstream.

powerpc:allmodconfig has been failing for some time with the following
error.

arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards
make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1

A number of attempts to fix the problem by moving around code have been
unsuccessful and resulted in failed builds for some configurations and
the discovery of toolchain bugs.

Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead.
While this is less than perfect, it avoids substantial code changes
which would otherwise be necessary just to make COMPILE_TEST builds
happy and might have undesired side effects.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/Kconfig |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -410,7 +410,7 @@ config KEXEC
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
 	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
-	select RELOCATABLE if PPC64 || 44x || FSL_BOOKE
+	select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The same kernel binary can be used as production kernel and dump
@@ -1000,6 +1000,7 @@ endmenu
 if PPC64
 config RELOCATABLE
 	bool "Build a relocatable kernel"
+	depends on !COMPILE_TEST
 	select NONSTATIC_KERNEL
 	help
 	  This builds a kernel image that is capable of running anywhere

[PATCH 3.14 59/66] Revert "x86-64, modify_ldt: Make support for 16-bit segments a runtime option"

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@zytor.com>

commit 7ed6fb9b5a5510e4ef78ab27419184741169978a upstream.

This reverts commit fa81511bb0bbb2b1aace3695ce869da9762624ff in
preparation of merging in the proper fix (espfix64).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/ldt.c        |    4 +---
 arch/x86/vdso/vdso32-setup.c |    8 --------
 2 files changed, 1 insertion(+), 11 deletions(-)

--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -20,8 +20,6 @@
 #include <asm/mmu_context.h>
 #include <asm/syscalls.h>
 
-int sysctl_ldt16 = 0;
-
 #ifdef CONFIG_SMP
 static void flush_ldt(void *current_mm)
 {
@@ -236,7 +234,7 @@ static int write_ldt(void __user *ptr, u
 	 * IRET leaking the high bits of the kernel stack address.
 	 */
 #ifdef CONFIG_X86_64
-	if (!ldt_info.seg_32bit && !sysctl_ldt16) {
+	if (!ldt_info.seg_32bit) {
 		error = -EINVAL;
 		goto out_unlock;
 	}
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -41,7 +41,6 @@ enum {
 #ifdef CONFIG_X86_64
 #define vdso_enabled			sysctl_vsyscall32
 #define arch_setup_additional_pages	syscall32_setup_pages
-extern int sysctl_ldt16;
 #endif
 
 /*
@@ -380,13 +379,6 @@ static struct ctl_table abi_table2[] = {
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
-	},
-	{
-		.procname	= "ldt16",
-		.data		= &sysctl_ldt16,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec
 	},
 	{}
 };

[PATCH 3.14 60/66] x86-64, espfix: Dont leak bits 31:16 of %esp returning to 16-bit stack

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@linux.intel.com>

commit 3891a04aafd668686239349ea58f3314ea2af86b upstream.

The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer.  This
causes some 16-bit software to break, but it also leaks kernel state
to user space.  We have a software workaround for that ("espfix") for
the 32-bit kernel, but it relies on a nonzero stack segment base which
is not available in 64-bit mode.

In checkin:

    b3b42ac2cbae x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

we "solved" this by forbidding 16-bit segments on 64-bit kernels, with
the logic that 16-bit support is crippled on 64-bit kernels anyway (no
V86 support), but it turns out that people are doing stuff like
running old Win16 binaries under Wine and expect it to work.

This works around this by creating percpu "ministacks", each of which
is mapped 2^16 times 64K apart.  When we detect that the return SS is
on the LDT, we copy the IRET frame to the ministack and use the
relevant alias to return to userspace.  The ministacks are mapped
readonly, so if IRET faults we promote #GP to #DF which is an IST
vector and thus has its own stack; we then do the fixup in the #DF
handler.

(Making #GP an IST exception would make the msr_safe functions unsafe
in NMI/MC context, and quite possibly have other effects.)

Special thanks to:

- Andy Lutomirski, for the suggestion of using very small stack slots
  and copy (as opposed to map) the IRET frame there, and for the
  suggestion to mark them readonly and let the fault promote to #DF.
- Konrad Wilk for paravirt fixup and testing.
- Borislav Petkov for testing help and useful comments.

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Lutomriski <amluto@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dirk Hohndel <dirk@hohndel.org>
Cc: Arjan van de Ven <arjan.van.de.ven@intel.com>
Cc: comex <comexk@gmail.com>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # consider after upstream merge
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/x86/x86_64/mm.txt         |    2 
 arch/x86/include/asm/pgtable_64_types.h |    2 
 arch/x86/include/asm/setup.h            |    3 
 arch/x86/kernel/Makefile                |    1 
 arch/x86/kernel/entry_64.S              |   73 ++++++++++-
 arch/x86/kernel/espfix_64.c             |  208 ++++++++++++++++++++++++++++++++
 arch/x86/kernel/ldt.c                   |   11 -
 arch/x86/kernel/smpboot.c               |    7 +
 arch/x86/mm/dump_pagetables.c           |   31 +++-
 init/main.c                             |    4 
 10 files changed, 316 insertions(+), 26 deletions(-)

--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -12,6 +12,8 @@ ffffc90000000000 - ffffe8ffffffffff (=45
 ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
 ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
+ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
+... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
 ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -61,6 +61,8 @@ typedef struct { pteval_t pte; } pte_t;
 #define MODULES_VADDR    (__START_KERNEL_map + KERNEL_IMAGE_SIZE)
 #define MODULES_END      _AC(0xffffffffff000000, UL)
 #define MODULES_LEN   (MODULES_END - MODULES_VADDR)
+#define ESPFIX_PGD_ENTRY _AC(-2, UL)
+#define ESPFIX_BASE_ADDR (ESPFIX_PGD_ENTRY << PGDIR_SHIFT)
 
 #define EARLY_DYNAMIC_PAGE_TABLES	64
 
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -63,6 +63,9 @@ extern void x86_ce4100_early_setup(void)
 static inline void x86_ce4100_early_setup(void) { }
 #endif
 
+extern void init_espfix_bsp(void);
+extern void init_espfix_ap(void);
+
 #ifndef _SETUP
 
 /*
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_X86_64)	+= sys_x86_64.o x86
 obj-y			+= syscall_$(BITS).o
 obj-$(CONFIG_X86_64)	+= vsyscall_64.o
 obj-$(CONFIG_X86_64)	+= vsyscall_emu_64.o
+obj-$(CONFIG_X86_64)	+= espfix_64.o
 obj-$(CONFIG_SYSFS)	+= ksysfs.o
 obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o topology.o kdebugfs.o
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -58,6 +58,7 @@
 #include <asm/asm.h>
 #include <asm/context_tracking.h>
 #include <asm/smap.h>
+#include <asm/pgtable_types.h>
 #include <linux/err.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
@@ -1040,8 +1041,16 @@ restore_args:
 	RESTORE_ARGS 1,8,1
 
 irq_return:
+	/*
+	 * Are we returning to a stack segment from the LDT?  Note: in
+	 * 64-bit mode SS:RSP on the exception stack is always valid.
+	 */
+	testb $4,(SS-RIP)(%rsp)
+	jnz irq_return_ldt
+
+irq_return_iret:
 	INTERRUPT_RETURN
-	_ASM_EXTABLE(irq_return, bad_iret)
+	_ASM_EXTABLE(irq_return_iret, bad_iret)
 
 #ifdef CONFIG_PARAVIRT
 ENTRY(native_iret)
@@ -1049,6 +1058,30 @@ ENTRY(native_iret)
 	_ASM_EXTABLE(native_iret, bad_iret)
 #endif
 
+irq_return_ldt:
+	pushq_cfi %rax
+	pushq_cfi %rdi
+	SWAPGS
+	movq PER_CPU_VAR(espfix_waddr),%rdi
+	movq %rax,(0*8)(%rdi)	/* RAX */
+	movq (2*8)(%rsp),%rax	/* RIP */
+	movq %rax,(1*8)(%rdi)
+	movq (3*8)(%rsp),%rax	/* CS */
+	movq %rax,(2*8)(%rdi)
+	movq (4*8)(%rsp),%rax	/* RFLAGS */
+	movq %rax,(3*8)(%rdi)
+	movq (6*8)(%rsp),%rax	/* SS */
+	movq %rax,(5*8)(%rdi)
+	movq (5*8)(%rsp),%rax	/* RSP */
+	movq %rax,(4*8)(%rdi)
+	andl $0xffff0000,%eax
+	popq_cfi %rdi
+	orq PER_CPU_VAR(espfix_stack),%rax
+	SWAPGS
+	movq %rax,%rsp
+	popq_cfi %rax
+	jmp irq_return_iret
+
 	.section .fixup,"ax"
 bad_iret:
 	/*
@@ -1110,9 +1143,41 @@ ENTRY(retint_kernel)
 	call preempt_schedule_irq
 	jmp exit_intr
 #endif
-
 	CFI_ENDPROC
 END(common_interrupt)
+
+	/*
+	 * If IRET takes a fault on the espfix stack, then we
+	 * end up promoting it to a doublefault.  In that case,
+	 * modify the stack to make it look like we just entered
+	 * the #GP handler from user space, similar to bad_iret.
+	 */
+	ALIGN
+__do_double_fault:
+	XCPT_FRAME 1 RDI+8
+	movq RSP(%rdi),%rax		/* Trap on the espfix stack? */
+	sarq $PGDIR_SHIFT,%rax
+	cmpl $ESPFIX_PGD_ENTRY,%eax
+	jne do_double_fault		/* No, just deliver the fault */
+	cmpl $__KERNEL_CS,CS(%rdi)
+	jne do_double_fault
+	movq RIP(%rdi),%rax
+	cmpq $irq_return_iret,%rax
+#ifdef CONFIG_PARAVIRT
+	je 1f
+	cmpq $native_iret,%rax
+#endif
+	jne do_double_fault		/* This shouldn't happen... */
+1:
+	movq PER_CPU_VAR(kernel_stack),%rax
+	subq $(6*8-KERNEL_STACK_OFFSET),%rax	/* Reset to original stack */
+	movq %rax,RSP(%rdi)
+	movq $0,(%rax)			/* Missing (lost) #GP error code */
+	movq $general_protection,RIP(%rdi)
+	retq
+	CFI_ENDPROC
+END(__do_double_fault)
+
 /*
  * End of kprobes section
  */
@@ -1314,7 +1379,7 @@ zeroentry overflow do_overflow
 zeroentry bounds do_bounds
 zeroentry invalid_op do_invalid_op
 zeroentry device_not_available do_device_not_available
-paranoiderrorentry double_fault do_double_fault
+paranoiderrorentry double_fault __do_double_fault
 zeroentry coprocessor_segment_overrun do_coprocessor_segment_overrun
 errorentry invalid_TSS do_invalid_TSS
 errorentry segment_not_present do_segment_not_present
@@ -1601,7 +1666,7 @@ error_sti:
  */
 error_kernelspace:
 	incl %ebx
-	leaq irq_return(%rip),%rcx
+	leaq irq_return_iret(%rip),%rcx
 	cmpq %rcx,RIP+8(%rsp)
 	je error_swapgs
 	movl %ecx,%eax	/* zero extend */
--- /dev/null
+++ b/arch/x86/kernel/espfix_64.c
@@ -0,0 +1,208 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *   Copyright 2014 Intel Corporation; author: H. Peter Anvin
+ *
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms and conditions of the GNU General Public License,
+ *   version 2, as published by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope it will be useful, but WITHOUT
+ *   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ *   more details.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * The IRET instruction, when returning to a 16-bit segment, only
+ * restores the bottom 16 bits of the user space stack pointer.  This
+ * causes some 16-bit software to break, but it also leaks kernel state
+ * to user space.
+ *
+ * This works around this by creating percpu "ministacks", each of which
+ * is mapped 2^16 times 64K apart.  When we detect that the return SS is
+ * on the LDT, we copy the IRET frame to the ministack and use the
+ * relevant alias to return to userspace.  The ministacks are mapped
+ * readonly, so if the IRET fault we promote #GP to #DF which is an IST
+ * vector and thus has its own stack; we then do the fixup in the #DF
+ * handler.
+ *
+ * This file sets up the ministacks and the related page tables.  The
+ * actual ministack invocation is in entry_64.S.
+ */
+
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <linux/gfp.h>
+#include <linux/random.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/setup.h>
+
+/*
+ * Note: we only need 6*8 = 48 bytes for the espfix stack, but round
+ * it up to a cache line to avoid unnecessary sharing.
+ */
+#define ESPFIX_STACK_SIZE	(8*8UL)
+#define ESPFIX_STACKS_PER_PAGE	(PAGE_SIZE/ESPFIX_STACK_SIZE)
+
+/* There is address space for how many espfix pages? */
+#define ESPFIX_PAGE_SPACE	(1UL << (PGDIR_SHIFT-PAGE_SHIFT-16))
+
+#define ESPFIX_MAX_CPUS		(ESPFIX_STACKS_PER_PAGE * ESPFIX_PAGE_SPACE)
+#if CONFIG_NR_CPUS > ESPFIX_MAX_CPUS
+# error "Need more than one PGD for the ESPFIX hack"
+#endif
+
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
+/* This contains the *bottom* address of the espfix stack */
+DEFINE_PER_CPU_READ_MOSTLY(unsigned long, espfix_stack);
+DEFINE_PER_CPU_READ_MOSTLY(unsigned long, espfix_waddr);
+
+/* Initialization mutex - should this be a spinlock? */
+static DEFINE_MUTEX(espfix_init_mutex);
+
+/* Page allocation bitmap - each page serves ESPFIX_STACKS_PER_PAGE CPUs */
+#define ESPFIX_MAX_PAGES  DIV_ROUND_UP(CONFIG_NR_CPUS, ESPFIX_STACKS_PER_PAGE)
+static void *espfix_pages[ESPFIX_MAX_PAGES];
+
+static __page_aligned_bss pud_t espfix_pud_page[PTRS_PER_PUD]
+	__aligned(PAGE_SIZE);
+
+static unsigned int page_random, slot_random;
+
+/*
+ * This returns the bottom address of the espfix stack for a specific CPU.
+ * The math allows for a non-power-of-two ESPFIX_STACK_SIZE, in which case
+ * we have to account for some amount of padding at the end of each page.
+ */
+static inline unsigned long espfix_base_addr(unsigned int cpu)
+{
+	unsigned long page, slot;
+	unsigned long addr;
+
+	page = (cpu / ESPFIX_STACKS_PER_PAGE) ^ page_random;
+	slot = (cpu + slot_random) % ESPFIX_STACKS_PER_PAGE;
+	addr = (page << PAGE_SHIFT) + (slot * ESPFIX_STACK_SIZE);
+	addr = (addr & 0xffffUL) | ((addr & ~0xffffUL) << 16);
+	addr += ESPFIX_BASE_ADDR;
+	return addr;
+}
+
+#define PTE_STRIDE        (65536/PAGE_SIZE)
+#define ESPFIX_PTE_CLONES (PTRS_PER_PTE/PTE_STRIDE)
+#define ESPFIX_PMD_CLONES PTRS_PER_PMD
+#define ESPFIX_PUD_CLONES (65536/(ESPFIX_PTE_CLONES*ESPFIX_PMD_CLONES))
+
+#define PGTABLE_PROT	  ((_KERNPG_TABLE & ~_PAGE_RW) | _PAGE_NX)
+
+static void init_espfix_random(void)
+{
+	unsigned long rand;
+
+	/*
+	 * This is run before the entropy pools are initialized,
+	 * but this is hopefully better than nothing.
+	 */
+	if (!arch_get_random_long(&rand)) {
+		/* The constant is an arbitrary large prime */
+		rdtscll(rand);
+		rand *= 0xc345c6b72fd16123UL;
+	}
+
+	slot_random = rand % ESPFIX_STACKS_PER_PAGE;
+	page_random = (rand / ESPFIX_STACKS_PER_PAGE)
+		& (ESPFIX_PAGE_SPACE - 1);
+}
+
+void __init init_espfix_bsp(void)
+{
+	pgd_t *pgd_p;
+	pteval_t ptemask;
+
+	ptemask = __supported_pte_mask;
+
+	/* Install the espfix pud into the kernel page directory */
+	pgd_p = &init_level4_pgt[pgd_index(ESPFIX_BASE_ADDR)];
+	pgd_populate(&init_mm, pgd_p, (pud_t *)espfix_pud_page);
+
+	/* Randomize the locations */
+	init_espfix_random();
+
+	/* The rest is the same as for any other processor */
+	init_espfix_ap();
+}
+
+void init_espfix_ap(void)
+{
+	unsigned int cpu, page;
+	unsigned long addr;
+	pud_t pud, *pud_p;
+	pmd_t pmd, *pmd_p;
+	pte_t pte, *pte_p;
+	int n;
+	void *stack_page;
+	pteval_t ptemask;
+
+	/* We only have to do this once... */
+	if (likely(this_cpu_read(espfix_stack)))
+		return;		/* Already initialized */
+
+	cpu = smp_processor_id();
+	addr = espfix_base_addr(cpu);
+	page = cpu/ESPFIX_STACKS_PER_PAGE;
+
+	/* Did another CPU already set this up? */
+	stack_page = ACCESS_ONCE(espfix_pages[page]);
+	if (likely(stack_page))
+		goto done;
+
+	mutex_lock(&espfix_init_mutex);
+
+	/* Did we race on the lock? */
+	stack_page = ACCESS_ONCE(espfix_pages[page]);
+	if (stack_page)
+		goto unlock_done;
+
+	ptemask = __supported_pte_mask;
+
+	pud_p = &espfix_pud_page[pud_index(addr)];
+	pud = *pud_p;
+	if (!pud_present(pud)) {
+		pmd_p = (pmd_t *)__get_free_page(PGALLOC_GFP);
+		pud = __pud(__pa(pmd_p) | (PGTABLE_PROT & ptemask));
+		paravirt_alloc_pud(&init_mm, __pa(pmd_p) >> PAGE_SHIFT);
+		for (n = 0; n < ESPFIX_PUD_CLONES; n++)
+			set_pud(&pud_p[n], pud);
+	}
+
+	pmd_p = pmd_offset(&pud, addr);
+	pmd = *pmd_p;
+	if (!pmd_present(pmd)) {
+		pte_p = (pte_t *)__get_free_page(PGALLOC_GFP);
+		pmd = __pmd(__pa(pte_p) | (PGTABLE_PROT & ptemask));
+		paravirt_alloc_pmd(&init_mm, __pa(pte_p) >> PAGE_SHIFT);
+		for (n = 0; n < ESPFIX_PMD_CLONES; n++)
+			set_pmd(&pmd_p[n], pmd);
+	}
+
+	pte_p = pte_offset_kernel(&pmd, addr);
+	stack_page = (void *)__get_free_page(GFP_KERNEL);
+	pte = __pte(__pa(stack_page) | (__PAGE_KERNEL_RO & ptemask));
+	paravirt_alloc_pte(&init_mm, __pa(stack_page) >> PAGE_SHIFT);
+	for (n = 0; n < ESPFIX_PTE_CLONES; n++)
+		set_pte(&pte_p[n*PTE_STRIDE], pte);
+
+	/* Job is done for this CPU and any CPU which shares this page */
+	ACCESS_ONCE(espfix_pages[page]) = stack_page;
+
+unlock_done:
+	mutex_unlock(&espfix_init_mutex);
+done:
+	this_cpu_write(espfix_stack, addr);
+	this_cpu_write(espfix_waddr, (unsigned long)stack_page
+		       + (addr & ~PAGE_MASK));
+}
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -229,17 +229,6 @@ static int write_ldt(void __user *ptr, u
 		}
 	}
 
-	/*
-	 * On x86-64 we do not support 16-bit segments due to
-	 * IRET leaking the high bits of the kernel stack address.
-	 */
-#ifdef CONFIG_X86_64
-	if (!ldt_info.seg_32bit) {
-		error = -EINVAL;
-		goto out_unlock;
-	}
-#endif
-
 	fill_ldt(&ldt, &ldt_info);
 	if (oldmode)
 		ldt.avl = 0;
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -243,6 +243,13 @@ static void notrace start_secondary(void
 	check_tsc_sync_target();
 
 	/*
+	 * Enable the espfix hack for this CPU
+	 */
+#ifdef CONFIG_X86_64
+	init_espfix_ap();
+#endif
+
+	/*
 	 * We need to hold vector_lock so there the set of online cpus
 	 * does not change while we are assigning vectors to cpus.  Holding
 	 * this lock ensures we don't half assign or remove an irq from a cpu.
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -30,11 +30,13 @@ struct pg_state {
 	unsigned long start_address;
 	unsigned long current_address;
 	const struct addr_marker *marker;
+	unsigned long lines;
 };
 
 struct addr_marker {
 	unsigned long start_address;
 	const char *name;
+	unsigned long max_lines;
 };
 
 /* indices for address_markers; keep sync'd w/ address_markers below */
@@ -45,6 +47,7 @@ enum address_markers_idx {
 	LOW_KERNEL_NR,
 	VMALLOC_START_NR,
 	VMEMMAP_START_NR,
+	ESPFIX_START_NR,
 	HIGH_KERNEL_NR,
 	MODULES_VADDR_NR,
 	MODULES_END_NR,
@@ -67,6 +70,7 @@ static struct addr_marker address_marker
 	{ PAGE_OFFSET,		"Low Kernel Mapping" },
 	{ VMALLOC_START,        "vmalloc() Area" },
 	{ VMEMMAP_START,        "Vmemmap" },
+	{ ESPFIX_BASE_ADDR,	"ESPfix Area", 16 },
 	{ __START_KERNEL_map,   "High Kernel Mapping" },
 	{ MODULES_VADDR,        "Modules" },
 	{ MODULES_END,          "End Modules" },
@@ -163,7 +167,7 @@ static void note_page(struct seq_file *m
 		      pgprot_t new_prot, int level)
 {
 	pgprotval_t prot, cur;
-	static const char units[] = "KMGTPE";
+	static const char units[] = "BKMGTPE";
 
 	/*
 	 * If we have a "break" in the series, we need to flush the state that
@@ -178,6 +182,7 @@ static void note_page(struct seq_file *m
 		st->current_prot = new_prot;
 		st->level = level;
 		st->marker = address_markers;
+		st->lines = 0;
 		seq_printf(m, "---[ %s ]---\n", st->marker->name);
 	} else if (prot != cur || level != st->level ||
 		   st->current_address >= st->marker[1].start_address) {
@@ -188,17 +193,21 @@ static void note_page(struct seq_file *m
 		/*
 		 * Now print the actual finished series
 		 */
-		seq_printf(m, "0x%0*lx-0x%0*lx   ",
-			   width, st->start_address,
-			   width, st->current_address);
-
-		delta = (st->current_address - st->start_address) >> 10;
-		while (!(delta & 1023) && unit[1]) {
-			delta >>= 10;
-			unit++;
+		if (!st->marker->max_lines ||
+		    st->lines < st->marker->max_lines) {
+			seq_printf(m, "0x%0*lx-0x%0*lx   ",
+				   width, st->start_address,
+				   width, st->current_address);
+
+			delta = (st->current_address - st->start_address) >> 10;
+			while (!(delta & 1023) && unit[1]) {
+				delta >>= 10;
+				unit++;
+			}
+			seq_printf(m, "%9lu%c ", delta, *unit);
+			printk_prot(m, st->current_prot, st->level);
 		}
-		seq_printf(m, "%9lu%c ", delta, *unit);
-		printk_prot(m, st->current_prot, st->level);
+		st->lines++;
 
 		/*
 		 * We print markers for special areas of address space,
--- a/init/main.c
+++ b/init/main.c
@@ -617,6 +617,10 @@ asmlinkage void __init start_kernel(void
 	if (efi_enabled(EFI_RUNTIME_SERVICES))
 		efi_enter_virtual_mode();
 #endif
+#ifdef CONFIG_X86_64
+	/* Should be run before the first non-init thread is created */
+	init_espfix_bsp();
+#endif
 	thread_info_cache_init();
 	cred_init();
 	fork_init(totalram_pages);

[PATCH 3.14 61/66] x86, espfix: Move espfix definitions into a separate header file

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@linux.intel.com>

commit e1fe9ed8d2a4937510d0d60e20705035c2609aea upstream.

Sparse warns that the percpu variables aren't declared before they are
defined.  Rather than hacking around it, move espfix definitions into
a proper header file.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/espfix.h |   16 ++++++++++++++++
 arch/x86/include/asm/setup.h  |    5 ++---
 arch/x86/kernel/espfix_64.c   |    1 +
 3 files changed, 19 insertions(+), 3 deletions(-)

--- /dev/null
+++ b/arch/x86/include/asm/espfix.h
@@ -0,0 +1,16 @@
+#ifdef _ASM_X86_ESPFIX_H
+#define _ASM_X86_ESPFIX_H
+
+#ifdef CONFIG_X86_64
+
+#include <asm/percpu.h>
+
+DECLARE_PER_CPU_READ_MOSTLY(unsigned long, espfix_stack);
+DECLARE_PER_CPU_READ_MOSTLY(unsigned long, espfix_waddr);
+
+extern void init_espfix_bsp(void);
+extern void init_espfix_ap(void);
+
+#endif /* CONFIG_X86_64 */
+
+#endif /* _ASM_X86_ESPFIX_H */
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -63,11 +63,10 @@ extern void x86_ce4100_early_setup(void)
 static inline void x86_ce4100_early_setup(void) { }
 #endif
 
-extern void init_espfix_bsp(void);
-extern void init_espfix_ap(void);
-
 #ifndef _SETUP
 
+#include <asm/espfix.h>
+
 /*
  * This is set up by the setup-routine at boot-time
  */
--- a/arch/x86/kernel/espfix_64.c
+++ b/arch/x86/kernel/espfix_64.c
@@ -40,6 +40,7 @@
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/setup.h>
+#include <asm/espfix.h>
 
 /*
  * Note: we only need 6*8 = 48 bytes for the espfix stack, but round

[PATCH 3.14 62/66] x86, espfix: Fix broken header guard

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@linux.intel.com>

commit 20b68535cd27183ebd3651ff313afb2b97dac941 upstream.

Header guard is #ifndef, not #ifdef...

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/espfix.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/include/asm/espfix.h
+++ b/arch/x86/include/asm/espfix.h
@@ -1,4 +1,4 @@
-#ifdef _ASM_X86_ESPFIX_H
+#ifndef _ASM_X86_ESPFIX_H
 #define _ASM_X86_ESPFIX_H
 
 #ifdef CONFIG_X86_64

[PATCH 3.14 63/66] x86, espfix: Make espfix64 a Kconfig option, fix UML

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@zytor.com>

commit 197725de65477bc8509b41388157c1a2283542bb upstream.

Make espfix64 a hidden Kconfig option.  This fixes the x86-64 UML
build which had broken due to the non-existence of init_espfix_bsp()
in UML: since UML uses its own Kconfig, this option does not appear in
the UML build.

This also makes it possible to make support for 16-bit segments a
configuration option, for the people who want to minimize the size of
the kernel.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/Kconfig          |    4 ++++
 arch/x86/kernel/Makefile  |    2 +-
 arch/x86/kernel/smpboot.c |    2 +-
 init/main.c               |    2 +-
 4 files changed, 7 insertions(+), 3 deletions(-)

--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -970,6 +970,10 @@ config VM86
 	  XFree86 to initialize some video cards via BIOS. Disabling this
 	  option saves about 6k.
 
+config X86_ESPFIX64
+	def_bool y
+	depends on X86_64
+
 config TOSHIBA
 	tristate "Toshiba Laptop support"
 	depends on X86_32
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_X86_64)	+= sys_x86_64.o x86
 obj-y			+= syscall_$(BITS).o
 obj-$(CONFIG_X86_64)	+= vsyscall_64.o
 obj-$(CONFIG_X86_64)	+= vsyscall_emu_64.o
-obj-$(CONFIG_X86_64)	+= espfix_64.o
+obj-$(CONFIG_X86_ESPFIX64)	+= espfix_64.o
 obj-$(CONFIG_SYSFS)	+= ksysfs.o
 obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o topology.o kdebugfs.o
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -245,7 +245,7 @@ static void notrace start_secondary(void
 	/*
 	 * Enable the espfix hack for this CPU
 	 */
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_ESPFIX64
 	init_espfix_ap();
 #endif
 
--- a/init/main.c
+++ b/init/main.c
@@ -617,7 +617,7 @@ asmlinkage void __init start_kernel(void
 	if (efi_enabled(EFI_RUNTIME_SERVICES))
 		efi_enter_virtual_mode();
 #endif
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_ESPFIX64
 	/* Should be run before the first non-init thread is created */
 	init_espfix_bsp();
 #endif

[PATCH 3.14 64/66] x86, espfix: Make it possible to disable 16-bit support

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@zytor.com>

commit 34273f41d57ee8d854dcd2a1d754cbb546cb548f upstream.

Embedded systems, which may be very memory-size-sensitive, are
extremely unlikely to ever encounter any 16-bit software, so make it
a CONFIG_EXPERT option to turn off support for any 16-bit software
whatsoever.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/Kconfig           |   23 ++++++++++++++++++-----
 arch/x86/kernel/entry_32.S |   12 ++++++++++++
 arch/x86/kernel/entry_64.S |    8 ++++++++
 arch/x86/kernel/ldt.c      |    5 +++++
 4 files changed, 43 insertions(+), 5 deletions(-)

--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -965,14 +965,27 @@ config VM86
 	default y
 	depends on X86_32
 	---help---
-	  This option is required by programs like DOSEMU to run 16-bit legacy
-	  code on X86 processors. It also may be needed by software like
-	  XFree86 to initialize some video cards via BIOS. Disabling this
-	  option saves about 6k.
+	  This option is required by programs like DOSEMU to run
+	  16-bit real mode legacy code on x86 processors. It also may
+	  be needed by software like XFree86 to initialize some video
+	  cards via BIOS. Disabling this option saves about 6K.
+
+config X86_16BIT
+	bool "Enable support for 16-bit segments" if EXPERT
+	default y
+	---help---
+	  This option is required by programs like Wine to run 16-bit
+	  protected mode legacy code on x86 processors.  Disabling
+	  this option saves about 300 bytes on i386, or around 6K text
+	  plus 16K runtime memory on x86-64,
+
+config X86_ESPFIX32
+	def_bool y
+	depends on X86_16BIT && X86_32
 
 config X86_ESPFIX64
 	def_bool y
-	depends on X86_64
+	depends on X86_16BIT && X86_64
 
 config TOSHIBA
 	tristate "Toshiba Laptop support"
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -528,6 +528,7 @@ syscall_exit:
 restore_all:
 	TRACE_IRQS_IRET
 restore_all_notrace:
+#ifdef CONFIG_X86_ESPFIX32
 	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS, SS and CS
 	# Warning: PT_OLDSS(%esp) contains the wrong/random values if we
 	# are returning to the kernel.
@@ -538,6 +539,7 @@ restore_all_notrace:
 	cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
 	CFI_REMEMBER_STATE
 	je ldt_ss			# returning to user-space with LDT SS
+#endif
 restore_nocheck:
 	RESTORE_REGS 4			# skip orig_eax/error_code
 irq_return:
@@ -550,6 +552,7 @@ ENTRY(iret_exc)
 .previous
 	_ASM_EXTABLE(irq_return,iret_exc)
 
+#ifdef CONFIG_X86_ESPFIX32
 	CFI_RESTORE_STATE
 ldt_ss:
 #ifdef CONFIG_PARAVIRT
@@ -593,6 +596,7 @@ ldt_ss:
 	lss (%esp), %esp		/* switch to espfix segment */
 	CFI_ADJUST_CFA_OFFSET -8
 	jmp restore_nocheck
+#endif
 	CFI_ENDPROC
 ENDPROC(system_call)
 
@@ -705,6 +709,7 @@ END(syscall_badsys)
  * the high word of the segment base from the GDT and swiches to the
  * normal stack and adjusts ESP with the matching offset.
  */
+#ifdef CONFIG_X86_ESPFIX32
 	/* fixup the stack */
 	mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
 	mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
@@ -714,8 +719,10 @@ END(syscall_badsys)
 	pushl_cfi %eax
 	lss (%esp), %esp		/* switch to the normal stack segment */
 	CFI_ADJUST_CFA_OFFSET -8
+#endif
 .endm
 .macro UNWIND_ESPFIX_STACK
+#ifdef CONFIG_X86_ESPFIX32
 	movl %ss, %eax
 	/* see if on espfix stack */
 	cmpw $__ESPFIX_SS, %ax
@@ -726,6 +733,7 @@ END(syscall_badsys)
 	/* switch to normal stack */
 	FIXUP_ESPFIX_STACK
 27:
+#endif
 .endm
 
 /*
@@ -1356,11 +1364,13 @@ END(debug)
 ENTRY(nmi)
 	RING0_INT_FRAME
 	ASM_CLAC
+#ifdef CONFIG_X86_ESPFIX32
 	pushl_cfi %eax
 	movl %ss, %eax
 	cmpw $__ESPFIX_SS, %ax
 	popl_cfi %eax
 	je nmi_espfix_stack
+#endif
 	cmpl $ia32_sysenter_target,(%esp)
 	je nmi_stack_fixup
 	pushl_cfi %eax
@@ -1400,6 +1410,7 @@ nmi_debug_stack_check:
 	FIX_STACK 24, nmi_stack_correct, 1
 	jmp nmi_stack_correct
 
+#ifdef CONFIG_X86_ESPFIX32
 nmi_espfix_stack:
 	/* We have a RING0_INT_FRAME here.
 	 *
@@ -1421,6 +1432,7 @@ nmi_espfix_stack:
 	lss 12+4(%esp), %esp		# back to espfix stack
 	CFI_ADJUST_CFA_OFFSET -24
 	jmp irq_return
+#endif
 	CFI_ENDPROC
 END(nmi)
 
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1045,8 +1045,10 @@ irq_return:
 	 * Are we returning to a stack segment from the LDT?  Note: in
 	 * 64-bit mode SS:RSP on the exception stack is always valid.
 	 */
+#ifdef CONFIG_X86_ESPFIX64
 	testb $4,(SS-RIP)(%rsp)
 	jnz irq_return_ldt
+#endif
 
 irq_return_iret:
 	INTERRUPT_RETURN
@@ -1058,6 +1060,7 @@ ENTRY(native_iret)
 	_ASM_EXTABLE(native_iret, bad_iret)
 #endif
 
+#ifdef CONFIG_X86_ESPFIX64
 irq_return_ldt:
 	pushq_cfi %rax
 	pushq_cfi %rdi
@@ -1081,6 +1084,7 @@ irq_return_ldt:
 	movq %rax,%rsp
 	popq_cfi %rax
 	jmp irq_return_iret
+#endif
 
 	.section .fixup,"ax"
 bad_iret:
@@ -1152,6 +1156,7 @@ END(common_interrupt)
 	 * modify the stack to make it look like we just entered
 	 * the #GP handler from user space, similar to bad_iret.
 	 */
+#ifdef CONFIG_X86_ESPFIX64
 	ALIGN
 __do_double_fault:
 	XCPT_FRAME 1 RDI+8
@@ -1177,6 +1182,9 @@ __do_double_fault:
 	retq
 	CFI_ENDPROC
 END(__do_double_fault)
+#else
+# define __do_double_fault do_double_fault
+#endif
 
 /*
  * End of kprobes section
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -229,6 +229,11 @@ static int write_ldt(void __user *ptr, u
 		}
 	}
 
+	if (!IS_ENABLED(CONFIG_X86_16BIT) && !ldt_info.seg_32bit) {
+		error = -EINVAL;
+		goto out_unlock;
+	}
+
 	fill_ldt(&ldt, &ldt_info);
 	if (oldmode)
 		ldt.avl = 0;

[PATCH 3.14 65/66] x86, ioremap: Speed up check for RAM pages

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit c81c8a1eeede61e92a15103748c23d100880cc8a upstream.

In __ioremap_caller() (the guts of ioremap), we loop over the range of
pfns being remapped and checks each one individually with page_is_ram().
For large ioremaps, this can be very slow.  For example, we have a
device with a 256 GiB PCI BAR, and ioremapping this BAR can take 20+
seconds -- sometimes long enough to trigger the soft lockup detector!

Internally, page_is_ram() calls walk_system_ram_range() on a single
page.  Instead, we can make a single call to walk_system_ram_range()
from __ioremap_caller(), and do our further checks only for any RAM
pages that we find.  For the common case of MMIO, this saves an enormous
amount of work, since the range being ioremapped doesn't intersect
system RAM at all.

With this change, ioremap on our 256 GiB BAR takes less than 1 second.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Link: http://lkml.kernel.org/r/1399054721-1331-1-git-send-email-roland@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/ioremap.c |   26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -50,6 +50,21 @@ int ioremap_change_attr(unsigned long va
 	return err;
 }
 
+static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages,
+			       void *arg)
+{
+	unsigned long i;
+
+	for (i = 0; i < nr_pages; ++i)
+		if (pfn_valid(start_pfn + i) &&
+		    !PageReserved(pfn_to_page(start_pfn + i)))
+			return 1;
+
+	WARN_ONCE(1, "ioremap on RAM pfn 0x%lx\n", start_pfn);
+
+	return 0;
+}
+
 /*
  * Remap an arbitrary physical address space into the kernel virtual
  * address space. Needed when the kernel wants to access high addresses
@@ -93,14 +108,11 @@ static void __iomem *__ioremap_caller(re
 	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
+	pfn      = phys_addr >> PAGE_SHIFT;
 	last_pfn = last_addr >> PAGE_SHIFT;
-	for (pfn = phys_addr >> PAGE_SHIFT; pfn <= last_pfn; pfn++) {
-		int is_ram = page_is_ram(pfn);
-
-		if (is_ram && pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn)))
-			return NULL;
-		WARN_ON_ONCE(is_ram);
-	}
+	if (walk_system_ram_range(pfn, last_pfn - pfn + 1, NULL,
+				  __ioremap_check_ram) == 1)
+		return NULL;
 
 	/*
 	 * Mappings have to be page-aligned

[PATCH 3.14 66/66] ACPI / battery: Retry to get battery information if failed during probing

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lan Tianyu <tianyu.lan@intel.com>

commit 75646e758a0ecbed5024454507d5be5b9ea9dcbf upstream.

Some machines (eg. Lenovo Z480) ECs are not stable during boot up
and causes battery driver fails to be loaded due to failure of getting
battery information from EC sometimes. After several retries, the
operation will work. This patch is to retry to get battery information 5
times if the first try fails.

[ backport to 3.14.5: removed second parameter in acpi_battery_update(),
introduced by the commit 9e50bc14a7f58b5d8a55973b2d69355852ae2dae (ACPI /
battery: Accelerate battery resume callback)]

[naszar <naszar@ya.ru>: backport to 3.14.5]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=75581
Reported-and-tested-by: naszar <naszar@ya.ru>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/battery.c |   27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -34,6 +34,7 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <linux/delay.h>
 #include <asm/unaligned.h>
 
 #ifdef CONFIG_ACPI_PROCFS_POWER
@@ -1070,6 +1071,28 @@ static struct dmi_system_id bat_dmi_tabl
 	{},
 };
 
+/*
+ * Some machines'(E,G Lenovo Z480) ECs are not stable
+ * during boot up and this causes battery driver fails to be
+ * probed due to failure of getting battery information
+ * from EC sometimes. After several retries, the operation
+ * may work. So add retry code here and 20ms sleep between
+ * every retries.
+ */
+static int acpi_battery_update_retry(struct acpi_battery *battery)
+{
+	int retry, ret;
+
+	for (retry = 5; retry; retry--) {
+		ret = acpi_battery_update(battery);
+		if (!ret)
+			break;
+
+		msleep(20);
+	}
+	return ret;
+}
+
 static int acpi_battery_add(struct acpi_device *device)
 {
 	int result = 0;
@@ -1088,9 +1111,11 @@ static int acpi_battery_add(struct acpi_
 	mutex_init(&battery->sysfs_lock);
 	if (acpi_has_method(battery->device->handle, "_BIX"))
 		set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags);
-	result = acpi_battery_update(battery);
+
+	result = acpi_battery_update_retry(battery);
 	if (result)
 		goto fail;
+
 #ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_battery_add_fs(device);
 #endif

Re: [PATCH 3.14 00/66] 3.14.13-stable review

[Guenter Roeck]

On 07/15/2014 04:16 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.13 release.
> There are 66 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jul 17 23:16:50 UTC 2014.
> Anything received after that time might be too late.
>

Build results:
	total: 140 pass: 140 fail: 0

Qemu tests all passed.

Results are obviously perfect.

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.14 00/66] 3.14.13-stable review

[Greg Kroah-Hartman]

On Tue, Jul 15, 2014 at 04:16:54PM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.13 release.
> There are 66 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jul 17 23:16:50 UTC 2014.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.13-rc1.gz
> and the diffstat can be found below.

As with 3.15, there's a new -rc2 out:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.13-rc2.gz

Re: [PATCH 3.14 00/66] 3.14.13-stable review

[Shuah Khan]

On 07/15/2014 05:16 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.13 release.
> There are 66 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jul 17 23:16:50 UTC 2014.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.13-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

rc1 and rc2 compiled and booted on my test system. No dmesg regressions.

-- Shuah

-- 
Shuah Khan
Senior Linux Kernel Developer - Open Source Group
Samsung Research America(Silicon Valley)
shuah.kh@samsung.com | (970) 672-0658