[PATCH v6 0/5] regulator: of: Add initial and suspend modes support

[PATCH v6 0/5] regulator: of: Add initial and suspend modes support

[Javier Martinez Canillas]

Hello Mark,

This is the sixth version of the series that adds regulator initial
and suspend operating modes support. It relies on the existing work
that added suspend states bindings. The opmodes are parsed by the
regulator core and drivers should only define a translation function
to map between hardware specific to standard modes.

The series adds a "regulator-initial-mode" property to configure at
startup, the operating mode for the regulators that support changing
its mode during normal operation and a "regulator-mode" property for
the regulators that supports changing its operating mode when the
system enters in a suspend state. These properties were originally
part of Chanwoo Choi's regulator suspend state series [0] but were
removed since there wasn't a way to define the operating modes in a
generic way.

The generic regulator DT binding doc explains that each device has
to document what their valid operating modes are and drivers must
add a translation function so the core knows how to map the opmodes.

If the patches are merged, following series will change the drivers
using of_regulator_match() to pass the regulator description in the
match table and another series will add the new opmode feature to
the max77802 regulator driver.

The series is composed of the following patches:

Javier Martinez Canillas (5):
  regulator: Document binding for initial and suspend modes
  regulator: Add mode mapping function to struct regulator_desc
  regulator: of: Add regulator desc param to
    of_get_regulator_init_data()
  regulator: of: Pass the regulator description in the match table
  regulator: of: Add support for parsing initial and suspend modes

 .../devicetree/bindings/regulator/regulator.txt    |  7 ++++
 drivers/regulator/88pm8607.c                       |  3 +-
 drivers/regulator/anatop-regulator.c               |  5 ++-
 drivers/regulator/arizona-ldo1.c                   |  8 ++--
 drivers/regulator/arizona-micsupp.c                |  8 ++--
 drivers/regulator/da9052-regulator.c               |  3 +-
 drivers/regulator/da9210-regulator.c               |  2 +-
 drivers/regulator/fan53555.c                       | 17 +++++----
 drivers/regulator/fixed.c                          | 19 ++++++----
 drivers/regulator/gpio-regulator.c                 | 18 +++++----
 drivers/regulator/max8952.c                        |  2 +-
 drivers/regulator/max8973-regulator.c              |  3 +-
 drivers/regulator/max8997.c                        |  3 +-
 drivers/regulator/max8998.c                        |  5 ++-
 drivers/regulator/mc13xxx-regulator-core.c         |  3 +-
 drivers/regulator/of_regulator.c                   | 43 +++++++++++++++++++---
 drivers/regulator/pwm-regulator.c                  |  3 +-
 drivers/regulator/qcom_rpm-regulator.c             |  9 +++--
 drivers/regulator/s5m8767.c                        |  3 +-
 drivers/regulator/sky81452-regulator.c             |  2 +-
 drivers/regulator/stw481x-vmmc.c                   |  3 +-
 drivers/regulator/ti-abb-regulator.c               |  3 +-
 drivers/regulator/tps51632-regulator.c             | 43 ++++++++++++----------
 drivers/regulator/tps62360-regulator.c             | 31 +++++++++-------
 drivers/regulator/tps65218-regulator.c             |  3 +-
 drivers/regulator/twl-regulator.c                  |  3 +-
 drivers/regulator/vexpress.c                       |  3 +-
 include/linux/regulator/driver.h                   |  4 ++
 include/linux/regulator/of_regulator.h             |  9 ++++-
 29 files changed, 174 insertions(+), 94 deletions(-)

Best regards,
Javier

[0]: https://lkml.org/lkml/2014/10/10/161

[PATCH v6 1/5] regulator: Document binding for initial and suspend modes

[Javier Martinez Canillas]

Some regulators can run on different operating modes (opmodes). This
allows systems to choose the most efficient opmode for each regulator.

This patch builds on top of (291d761 regulator: Document binding for
regulator suspend state for PM state) adding a regulator-initial-mode
DT property to configure at startup the operating mode for regulators
that support changing its mode during normal operation and a property
regulator-mode to be used in the regulator-state-[mem/disk] nodes for
regulators that supports changing its operating mode when the system
enters in a suspend state.

The set of possible modes that a regulator can operate depends on the
hardware capabilities so a list of generic operating modes can't be
provided. Instead, each hardware binding should define the list of
valid operating modes for the regulators found on that device.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---

Changes in v6:
 - Remove assumptions about implementation details and don't overspecify.
   Suggested by Mark Brown.

Changes in v5: None

Changes in v4: None

Changes in v3:
 - Rebased on top of regulator suspend voltage series

 Documentation/devicetree/bindings/regulator/regulator.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 4e7ed76..abb26b5 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -30,6 +30,13 @@ Optional properties:
 	- regulator-off-in-suspend: regulator should be off in suspend state.
 	- regulator-suspend-microvolt: regulator should be set to this voltage
 	  in suspend.
+	- regulator-mode: operating mode in the given suspend state.
+	  The set of possible operating modes depends on the capabilities of
+	  every hardware so the valid modes are documented on each regulator
+	  device tree binding document.
+- regulator-initial-mode: initial operating mode. The set of possible operating
+  modes depends on the capabilities of every hardware so each device binding
+  documentation explains which values the regulator supports.
 
 Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple
-- 
2.1.0

[PATCH v6 2/5] regulator: Add mode mapping function to struct regulator_desc

[Javier Martinez Canillas]

The "regulator-initial-mode" and "regulator-mode" DT properties allows
to configure the regulator operating modes at startup or when a system
enters into a susend state.

But these properties use as valid values the operating modes supported
by each device while the core deals with the standard operating modes.
So a mapping function is needed to translate from the hardware specific
modes to the standard ones.

This mapping is a non-varying configuration for each regulator, so add
a function pointer to struct regulator_desc that will allow drivers to
define their callback to do the modes translation.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---

Changes in v6:
 - Rename function from .map_modes to .of_map_mode. Suggested by Mark Brown.
 - Remove obvious explanation from the function doc. Suggested by Mark Brown.

Changes in v5:
 - Add a better explanation of what mode is passed as an argument and what
   mode is returned. Suggested by Krzysztof Kozlowski.
 - Explain that this callback is needed to be able to parse the regulator
   initial and suspend state modes. Suggested by Krzysztof Kozlowski.

 include/linux/regulator/driver.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 28da08e..5f1e9ca 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -243,6 +243,8 @@ enum regulator_type {
  *
  * @enable_time: Time taken for initial enable of regulator (in uS).
  * @off_on_delay: guard time (in uS), before re-enabling a regulator
+ *
+ * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode
  */
 struct regulator_desc {
 	const char *name;
@@ -285,6 +287,8 @@ struct regulator_desc {
 	unsigned int enable_time;
 
 	unsigned int off_on_delay;
+
+	unsigned int (*of_map_mode)(unsigned int mode);
 };
 
 /**
-- 
2.1.0

[PATCH v6 3/5] regulator: of: Add regulator desc param to of_get_regulator_init_data()

[Javier Martinez Canillas]

The of_get_regulator_init_data() function is used to extract the regulator
init_data but information on how to extract certain data is defined in the
static regulator descriptor (e.g: how to map the hardware operating modes).

Add a const struct regulator_desc * parameter to the function signature so
the parsing logic could use the information in the struct regulator_desc.

of_get_regulator_init_data() relies on of_get_regulation_constraints() to
actually extract the init_data so it has to pass the struct regulator_desc
but that is modified on a later patch.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---

The of_regulator_match() function still passes NULL as regulator_desc to
of_get_regulator_init_data() since but a following patch adds a struct
regulator_desc pointer to struct of_regulator_match so callers can pass
the regulator description.

Changes in v6:
 - Always use const modifier. Suggested by Krzysztof Kozlowski.
 - Don't use the regulator descriptor before is completely initialised.
   Suggested by Mark Brown.
 - Use forward declaration instead including linux/regulator/driver.h.
   Suggested by Mark Brown.

Changes in v5:
 - Pass the descriptor struct regulator_desc to of_get_regulator_init_data()
   for all drivers even if won't be currently used. Suggested by Mark Brown.

 drivers/regulator/88pm8607.c               |  3 ++-
 drivers/regulator/anatop-regulator.c       |  5 ++--
 drivers/regulator/arizona-ldo1.c           |  8 +++---
 drivers/regulator/arizona-micsupp.c        |  8 +++---
 drivers/regulator/da9052-regulator.c       |  3 ++-
 drivers/regulator/da9210-regulator.c       |  2 +-
 drivers/regulator/fan53555.c               | 17 ++++++------
 drivers/regulator/fixed.c                  | 19 +++++++------
 drivers/regulator/gpio-regulator.c         | 18 +++++++------
 drivers/regulator/max8952.c                |  2 +-
 drivers/regulator/max8973-regulator.c      |  3 ++-
 drivers/regulator/max8997.c                |  3 ++-
 drivers/regulator/max8998.c                |  5 ++--
 drivers/regulator/mc13xxx-regulator-core.c |  3 ++-
 drivers/regulator/of_regulator.c           |  9 ++++---
 drivers/regulator/pwm-regulator.c          |  3 ++-
 drivers/regulator/qcom_rpm-regulator.c     |  9 ++++---
 drivers/regulator/s5m8767.c                |  3 ++-
 drivers/regulator/sky81452-regulator.c     |  2 +-
 drivers/regulator/stw481x-vmmc.c           |  3 ++-
 drivers/regulator/ti-abb-regulator.c       |  3 ++-
 drivers/regulator/tps51632-regulator.c     | 43 ++++++++++++++++--------------
 drivers/regulator/tps62360-regulator.c     | 31 +++++++++++----------
 drivers/regulator/tps65218-regulator.c     |  3 ++-
 drivers/regulator/twl-regulator.c          |  3 ++-
 drivers/regulator/vexpress.c               |  3 ++-
 include/linux/regulator/of_regulator.h     |  8 ++++--
 27 files changed, 130 insertions(+), 92 deletions(-)

diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 6d77dcd..3fe47bd 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -330,7 +330,8 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev,
 	for_each_child_of_node(nproot, np) {
 		if (!of_node_cmp(np->name, info->desc.name)) {
 			config->init_data =
-				of_get_regulator_init_data(&pdev->dev, np);
+				of_get_regulator_init_data(&pdev->dev, np,
+							   &info->desc);
 			config->of_node = np;
 			break;
 		}
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 542d14e..3586571 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -189,17 +189,18 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 	int ret = 0;
 	u32 val;
 
-	initdata = of_get_regulator_init_data(dev, np);
 	sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
 	if (!sreg)
 		return -ENOMEM;
-	sreg->initdata = initdata;
 	sreg->name = of_get_property(np, "regulator-name", NULL);
 	rdesc = &sreg->rdesc;
 	rdesc->name = sreg->name;
 	rdesc->type = REGULATOR_VOLTAGE;
 	rdesc->owner = THIS_MODULE;
 
+	initdata = of_get_regulator_init_data(dev, np, rdesc);
+	sreg->initdata = initdata;
+
 	anatop_np = of_get_parent(np);
 	if (!anatop_np)
 		return -ENODEV;
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 4c9db58..b1eea7f 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -179,7 +179,8 @@ static const struct regulator_init_data arizona_ldo1_default = {
 };
 
 static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
-				     struct regulator_config *config)
+				     struct regulator_config *config,
+				     const struct regulator_desc *desc)
 {
 	struct arizona_pdata *pdata = &arizona->pdata;
 	struct arizona_ldo1 *ldo1 = config->driver_data;
@@ -194,7 +195,8 @@ static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
 	if (init_node) {
 		config->of_node = init_node;
 
-		init_data = of_get_regulator_init_data(arizona->dev, init_node);
+		init_data = of_get_regulator_init_data(arizona->dev, init_node,
+						       desc);
 
 		if (init_data) {
 			init_data->consumer_supplies = &ldo1->supply;
@@ -257,7 +259,7 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 
 	if (IS_ENABLED(CONFIG_OF)) {
 		if (!dev_get_platdata(arizona->dev)) {
-			ret = arizona_ldo1_of_get_pdata(arizona, &config);
+			ret = arizona_ldo1_of_get_pdata(arizona, &config, desc);
 			if (ret < 0)
 				return ret;
 		}
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index ce9aca5..c313ef4 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -198,7 +198,8 @@ static const struct regulator_init_data arizona_micsupp_ext_default = {
 };
 
 static int arizona_micsupp_of_get_pdata(struct arizona *arizona,
-					struct regulator_config *config)
+					struct regulator_config *config,
+					const struct regulator_desc *desc)
 {
 	struct arizona_pdata *pdata = &arizona->pdata;
 	struct arizona_micsupp *micsupp = config->driver_data;
@@ -210,7 +211,7 @@ static int arizona_micsupp_of_get_pdata(struct arizona *arizona,
 	if (np) {
 		config->of_node = np;
 
-		init_data = of_get_regulator_init_data(arizona->dev, np);
+		init_data = of_get_regulator_init_data(arizona->dev, np, desc);
 
 		if (init_data) {
 			init_data->consumer_supplies = &micsupp->supply;
@@ -264,7 +265,8 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 
 	if (IS_ENABLED(CONFIG_OF)) {
 		if (!dev_get_platdata(arizona->dev)) {
-			ret = arizona_micsupp_of_get_pdata(arizona, &config);
+			ret = arizona_micsupp_of_get_pdata(arizona, &config,
+							   desc);
 			if (ret < 0)
 				return ret;
 		}
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 0003362..3945f10 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -436,7 +436,8 @@ static int da9052_regulator_probe(struct platform_device *pdev)
 			if (!of_node_cmp(np->name,
 					 regulator->info->reg_desc.name)) {
 				config.init_data = of_get_regulator_init_data(
-					&pdev->dev, np);
+					&pdev->dev, np,
+					&regulator->info->reg_desc);
 				config.of_node = np;
 				break;
 			}
diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index 7a320dd..bc61001 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -147,7 +147,7 @@ static int da9210_i2c_probe(struct i2c_client *i2c,
 
 	config.dev = &i2c->dev;
 	config.init_data = pdata ? &pdata->da9210_constraints :
-		of_get_regulator_init_data(dev, dev->of_node);
+		of_get_regulator_init_data(dev, dev->of_node, &da9210_reg);
 	config.driver_data = chip;
 	config.regmap = chip->regmap;
 	config.of_node = dev->of_node;
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index f8e4257..6c43ab2 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -302,7 +302,8 @@ static struct regmap_config fan53555_regmap_config = {
 };
 
 static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
-							struct device_node *np)
+					      struct device_node *np,
+					      const struct regulator_desc *desc)
 {
 	struct fan53555_platform_data *pdata;
 	int ret;
@@ -312,7 +313,7 @@ static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
 	if (!pdata)
 		return NULL;
 
-	pdata->regulator = of_get_regulator_init_data(dev, np);
+	pdata->regulator = of_get_regulator_init_data(dev, np, desc);
 
 	ret = of_property_read_u32(np, "fcs,suspend-voltage-selector",
 				   &tmp);
@@ -347,20 +348,20 @@ static int fan53555_regulator_probe(struct i2c_client *client,
 	unsigned int val;
 	int ret;
 
+	di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
+					GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
 	pdata = dev_get_platdata(&client->dev);
 	if (!pdata)
-		pdata = fan53555_parse_dt(&client->dev, np);
+		pdata = fan53555_parse_dt(&client->dev, np, &di->desc);
 
 	if (!pdata || !pdata->regulator) {
 		dev_err(&client->dev, "Platform data not found!\n");
 		return -ENODEV;
 	}
 
-	di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
-					GFP_KERNEL);
-	if (!di)
-		return -ENOMEM;
-
 	di->regulator = pdata->regulator;
 	if (client->dev.of_node) {
 		const struct of_device_id *match;
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 354105e..6cfcbc8 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -40,13 +40,15 @@ struct fixed_voltage_data {
 /**
  * of_get_fixed_voltage_config - extract fixed_voltage_config structure info
  * @dev: device requesting for fixed_voltage_config
+ * @desc: regulator description
  *
  * Populates fixed_voltage_config structure by extracting data from device
  * tree node, returns a pointer to the populated structure of NULL if memory
  * alloc fails.
  */
 static struct fixed_voltage_config *
-of_get_fixed_voltage_config(struct device *dev)
+of_get_fixed_voltage_config(struct device *dev,
+			    const struct regulator_desc *desc)
 {
 	struct fixed_voltage_config *config;
 	struct device_node *np = dev->of_node;
@@ -57,7 +59,7 @@ of_get_fixed_voltage_config(struct device *dev)
 	if (!config)
 		return ERR_PTR(-ENOMEM);
 
-	config->init_data = of_get_regulator_init_data(dev, dev->of_node);
+	config->init_data = of_get_regulator_init_data(dev, dev->of_node, desc);
 	if (!config->init_data)
 		return ERR_PTR(-EINVAL);
 
@@ -112,8 +114,14 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	struct regulator_config cfg = { };
 	int ret;
 
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
+			       GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
 	if (pdev->dev.of_node) {
-		config = of_get_fixed_voltage_config(&pdev->dev);
+		config = of_get_fixed_voltage_config(&pdev->dev,
+						     &drvdata->desc);
 		if (IS_ERR(config))
 			return PTR_ERR(config);
 	} else {
@@ -123,11 +131,6 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	if (!config)
 		return -ENOMEM;
 
-	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
-			       GFP_KERNEL);
-	if (!drvdata)
-		return -ENOMEM;
-
 	drvdata->desc.name = devm_kstrdup(&pdev->dev,
 					  config->supply_name,
 					  GFP_KERNEL);
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 989b23b..5c3bcae 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -133,7 +133,8 @@ static struct regulator_ops gpio_regulator_voltage_ops = {
 };
 
 static struct gpio_regulator_config *
-of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
+of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
+			     const struct regulator_desc *desc)
 {
 	struct gpio_regulator_config *config;
 	const char *regtype;
@@ -146,7 +147,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
 	if (!config)
 		return ERR_PTR(-ENOMEM);
 
-	config->init_data = of_get_regulator_init_data(dev, np);
+	config->init_data = of_get_regulator_init_data(dev, np, desc);
 	if (!config->init_data)
 		return ERR_PTR(-EINVAL);
 
@@ -243,17 +244,18 @@ static int gpio_regulator_probe(struct platform_device *pdev)
 	struct regulator_config cfg = { };
 	int ptr, ret, state;
 
-	if (np) {
-		config = of_get_gpio_regulator_config(&pdev->dev, np);
-		if (IS_ERR(config))
-			return PTR_ERR(config);
-	}
-
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
 			       GFP_KERNEL);
 	if (drvdata == NULL)
 		return -ENOMEM;
 
+	if (np) {
+		config = of_get_gpio_regulator_config(&pdev->dev, np,
+						      &drvdata->desc);
+		if (IS_ERR(config))
+			return PTR_ERR(config);
+	}
+
 	drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
 	if (drvdata->desc.name == NULL) {
 		dev_err(&pdev->dev, "Failed to allocate supply name\n");
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index f7f9efc..6e54d78 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -174,7 +174,7 @@ static struct max8952_platform_data *max8952_parse_dt(struct device *dev)
 	if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed))
 		dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n");
 
-	pd->reg_data = of_get_regulator_init_data(dev, np);
+	pd->reg_data = of_get_regulator_init_data(dev, np, &regulator);
 	if (!pd->reg_data) {
 		dev_err(dev, "Failed to parse regulator init data\n");
 		return NULL;
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index dbedf17..c3d55c2 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -458,7 +458,8 @@ static int max8973_probe(struct i2c_client *client,
 
 	config.dev = &client->dev;
 	config.init_data = pdata ? pdata->reg_init_data :
-		of_get_regulator_init_data(&client->dev, client->dev.of_node);
+		of_get_regulator_init_data(&client->dev, client->dev.of_node,
+					   &max->desc);
 	config.driver_data = max;
 	config.of_node = client->dev.of_node;
 	config.regmap = max->regmap;
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 9c31e21..726fde1 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -953,7 +953,8 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
 
 		rdata->id = i;
 		rdata->initdata = of_get_regulator_init_data(&pdev->dev,
-							     reg_np);
+							     reg_np,
+							     &regulators[i]);
 		rdata->reg_node = reg_np;
 		rdata++;
 	}
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 961091b..59e34a0 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -686,8 +686,9 @@ static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev,
 			continue;
 
 		rdata->id = regulators[i].id;
-		rdata->initdata = of_get_regulator_init_data(
-							iodev->dev, reg_np);
+		rdata->initdata = of_get_regulator_init_data(iodev->dev,
+							     reg_np,
+							     &regulators[i]);
 		rdata->reg_node = reg_np;
 		++rdata;
 	}
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index afba024..0281c31 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -194,7 +194,8 @@ struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
 					 regulators[i].desc.name)) {
 				p->id = i;
 				p->init_data = of_get_regulator_init_data(
-							&pdev->dev, child);
+							&pdev->dev, child,
+							&regulators[i].desc);
 				p->node = child;
 				p++;
 
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 03edb17..945486f 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -120,13 +120,16 @@ static void of_get_regulation_constraints(struct device_node *np,
 /**
  * of_get_regulator_init_data - extract regulator_init_data structure info
  * @dev: device requesting for regulator_init_data
+ * @node: regulator device node
+ * @desc: regulator description
  *
  * Populates regulator_init_data structure by extracting data from device
  * tree node, returns a pointer to the populated struture or NULL if memory
  * alloc fails.
  */
 struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
-						struct device_node *node)
+					  struct device_node *node,
+					  const struct regulator_desc *desc)
 {
 	struct regulator_init_data *init_data;
 
@@ -218,7 +221,7 @@ int of_regulator_match(struct device *dev, struct device_node *node,
 				continue;
 
 			match->init_data =
-				of_get_regulator_init_data(dev, child);
+				of_get_regulator_init_data(dev, child, NULL);
 			if (!match->init_data) {
 				dev_err(dev,
 					"failed to parse DT for regulator %s\n",
@@ -266,7 +269,7 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 		if (strcmp(desc->of_match, name))
 			continue;
 
-		init_data = of_get_regulator_init_data(dev, child);
+		init_data = of_get_regulator_init_data(dev, child, desc);
 		if (!init_data) {
 			dev_err(dev,
 				"failed to parse DT for regulator %s\n",
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index d3f55ea..91f34ca 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -149,7 +149,8 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	config.init_data = of_get_regulator_init_data(&pdev->dev, np);
+	config.init_data = of_get_regulator_init_data(&pdev->dev, np,
+						      &drvdata->desc);
 	if (!config.init_data)
 		return -ENOMEM;
 
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index b55cd5b..dabd28a 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -643,10 +643,6 @@ static int rpm_reg_probe(struct platform_device *pdev)
 	match = of_match_device(rpm_of_match, &pdev->dev);
 	template = match->data;
 
-	initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
-	if (!initdata)
-		return -EINVAL;
-
 	vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
 	if (!vreg) {
 		dev_err(&pdev->dev, "failed to allocate vreg\n");
@@ -666,6 +662,11 @@ static int rpm_reg_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+					      &vreg->desc);
+	if (!initdata)
+		return -EINVAL;
+
 	key = "reg";
 	ret = of_property_read_u32(pdev->dev.of_node, key, &val);
 	if (ret) {
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 0ab5cbe..26932fe 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -581,7 +581,8 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 
 		rdata->id = i;
 		rdata->initdata = of_get_regulator_init_data(
-						&pdev->dev, reg_np);
+						&pdev->dev, reg_np,
+						&regulators[i]);
 		rdata->reg_node = reg_np;
 		rdata++;
 		rmode->id = i;
diff --git a/drivers/regulator/sky81452-regulator.c b/drivers/regulator/sky81452-regulator.c
index 476b80a..e68e13f 100644
--- a/drivers/regulator/sky81452-regulator.c
+++ b/drivers/regulator/sky81452-regulator.c
@@ -76,7 +76,7 @@ static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
 		return NULL;
 	}
 
-	init_data = of_get_regulator_init_data(dev, np);
+	init_data = of_get_regulator_init_data(dev, np, &sky81452_reg);
 
 	of_node_put(np);
 	return init_data;
diff --git a/drivers/regulator/stw481x-vmmc.c b/drivers/regulator/stw481x-vmmc.c
index a7e1526..b4f1696 100644
--- a/drivers/regulator/stw481x-vmmc.c
+++ b/drivers/regulator/stw481x-vmmc.c
@@ -72,7 +72,8 @@ static int stw481x_vmmc_regulator_probe(struct platform_device *pdev)
 	config.regmap = stw481x->map;
 	config.of_node = pdev->dev.of_node;
 	config.init_data = of_get_regulator_init_data(&pdev->dev,
-						      pdev->dev.of_node);
+						      pdev->dev.of_node,
+						      &vmmc_regulator);
 
 	stw481x->vmmc_regulator = devm_regulator_register(&pdev->dev,
 						&vmmc_regulator, &config);
diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c
index a2dabb5..1ef5aba 100644
--- a/drivers/regulator/ti-abb-regulator.c
+++ b/drivers/regulator/ti-abb-regulator.c
@@ -837,7 +837,8 @@ skip_opt:
 		return -EINVAL;
 	}
 
-	initdata = of_get_regulator_init_data(dev, pdev->dev.of_node);
+	initdata = of_get_regulator_init_data(dev, pdev->dev.of_node,
+					      &abb->rdesc);
 	if (!initdata) {
 		dev_err(dev, "%s: Unable to alloc regulator init data\n",
 			__func__);
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
index f31f22e..c213e37 100644
--- a/drivers/regulator/tps51632-regulator.c
+++ b/drivers/regulator/tps51632-regulator.c
@@ -221,7 +221,8 @@ static const struct of_device_id tps51632_of_match[] = {
 MODULE_DEVICE_TABLE(of, tps51632_of_match);
 
 static struct tps51632_regulator_platform_data *
-	of_get_tps51632_platform_data(struct device *dev)
+	of_get_tps51632_platform_data(struct device *dev,
+				      const struct regulator_desc *desc)
 {
 	struct tps51632_regulator_platform_data *pdata;
 	struct device_node *np = dev->of_node;
@@ -230,7 +231,8 @@ static struct tps51632_regulator_platform_data *
 	if (!pdata)
 		return NULL;
 
-	pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+	pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node,
+							  desc);
 	if (!pdata->reg_init_data) {
 		dev_err(dev, "Not able to get OF regulator init data\n");
 		return NULL;
@@ -248,7 +250,8 @@ static struct tps51632_regulator_platform_data *
 }
 #else
 static struct tps51632_regulator_platform_data *
-	of_get_tps51632_platform_data(struct device *dev)
+	of_get_tps51632_platform_data(struct device *dev,
+				      const struct regulator_desc *desc)
 {
 	return NULL;
 }
@@ -273,9 +276,25 @@ static int tps51632_probe(struct i2c_client *client,
 		}
 	}
 
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	tps->dev = &client->dev;
+	tps->desc.name = client->name;
+	tps->desc.id = 0;
+	tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
+	tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
+	tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
+	tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
+	tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
+	tps->desc.ops = &tps51632_dcdc_ops;
+	tps->desc.type = REGULATOR_VOLTAGE;
+	tps->desc.owner = THIS_MODULE;
+
 	pdata = dev_get_platdata(&client->dev);
 	if (!pdata && client->dev.of_node)
-		pdata = of_get_tps51632_platform_data(&client->dev);
+		pdata = of_get_tps51632_platform_data(&client->dev, &tps->desc);
 	if (!pdata) {
 		dev_err(&client->dev, "No Platform data\n");
 		return -EINVAL;
@@ -296,22 +315,6 @@ static int tps51632_probe(struct i2c_client *client,
 		}
 	}
 
-	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
-	if (!tps)
-		return -ENOMEM;
-
-	tps->dev = &client->dev;
-	tps->desc.name = client->name;
-	tps->desc.id = 0;
-	tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
-	tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
-	tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
-	tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
-	tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
-	tps->desc.ops = &tps51632_dcdc_ops;
-	tps->desc.type = REGULATOR_VOLTAGE;
-	tps->desc.owner = THIS_MODULE;
-
 	if (pdata->enable_pwm_dvfs)
 		tps->desc.vsel_reg = TPS51632_VOLTAGE_BASE_REG;
 	else
diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c
index a167204..a1fd626 100644
--- a/drivers/regulator/tps62360-regulator.c
+++ b/drivers/regulator/tps62360-regulator.c
@@ -293,7 +293,8 @@ static const struct regmap_config tps62360_regmap_config = {
 };
 
 static struct tps62360_regulator_platform_data *
-	of_get_tps62360_platform_data(struct device *dev)
+	of_get_tps62360_platform_data(struct device *dev,
+				      const struct regulator_desc *desc)
 {
 	struct tps62360_regulator_platform_data *pdata;
 	struct device_node *np = dev->of_node;
@@ -302,7 +303,8 @@ static struct tps62360_regulator_platform_data *
 	if (!pdata)
 		return NULL;
 
-	pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+	pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node,
+							  desc);
 	if (!pdata->reg_init_data) {
 		dev_err(dev, "Not able to get OF regulator init data\n");
 		return NULL;
@@ -350,6 +352,17 @@ static int tps62360_probe(struct i2c_client *client,
 
 	pdata = dev_get_platdata(&client->dev);
 
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	tps->desc.name = client->name;
+	tps->desc.id = 0;
+	tps->desc.ops = &tps62360_dcdc_ops;
+	tps->desc.type = REGULATOR_VOLTAGE;
+	tps->desc.owner = THIS_MODULE;
+	tps->desc.uV_step = 10000;
+
 	if (client->dev.of_node) {
 		const struct of_device_id *match;
 		match = of_match_device(of_match_ptr(tps62360_of_match),
@@ -360,7 +373,8 @@ static int tps62360_probe(struct i2c_client *client,
 		}
 		chip_id = (int)(long)match->data;
 		if (!pdata)
-			pdata = of_get_tps62360_platform_data(&client->dev);
+			pdata = of_get_tps62360_platform_data(&client->dev,
+							      &tps->desc);
 	} else if (id) {
 		chip_id = id->driver_data;
 	} else {
@@ -374,10 +388,6 @@ static int tps62360_probe(struct i2c_client *client,
 		return -EIO;
 	}
 
-	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
-	if (!tps)
-		return -ENOMEM;
-
 	tps->en_discharge = pdata->en_discharge;
 	tps->en_internal_pulldn = pdata->en_internal_pulldn;
 	tps->vsel0_gpio = pdata->vsel0_gpio;
@@ -401,13 +411,6 @@ static int tps62360_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	tps->desc.name = client->name;
-	tps->desc.id = 0;
-	tps->desc.ops = &tps62360_dcdc_ops;
-	tps->desc.type = REGULATOR_VOLTAGE;
-	tps->desc.owner = THIS_MODULE;
-	tps->desc.uV_step = 10000;
-
 	tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);
 	if (IS_ERR(tps->regmap)) {
 		ret = PTR_ERR(tps->regmap);
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index f0a4028..263cc85 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -231,7 +231,8 @@ static int tps65218_regulator_probe(struct platform_device *pdev)
 
 	template = match->data;
 	id = template->id;
-	init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+	init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+					       &regulators[id]);
 
 	platform_set_drvdata(pdev, tps);
 
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 0b4f866..dd727bc 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -1104,7 +1104,8 @@ static int twlreg_probe(struct platform_device *pdev)
 		template = match->data;
 		id = template->desc.id;
 		initdata = of_get_regulator_init_data(&pdev->dev,
-						      pdev->dev.of_node);
+						      pdev->dev.of_node,
+						      &template->desc);
 		drvdata = NULL;
 	} else {
 		id = pdev->id;
diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress.c
index 02e7267..5e7c789 100644
--- a/drivers/regulator/vexpress.c
+++ b/drivers/regulator/vexpress.c
@@ -74,7 +74,8 @@ static int vexpress_regulator_probe(struct platform_device *pdev)
 	reg->desc.owner = THIS_MODULE;
 	reg->desc.continuous_voltage_range = true;
 
-	init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+	init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+					       &reg->desc);
 	if (!init_data)
 		return -EINVAL;
 
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
index f921796..8d1d136 100644
--- a/include/linux/regulator/of_regulator.h
+++ b/include/linux/regulator/of_regulator.h
@@ -6,6 +6,8 @@
 #ifndef __LINUX_OF_REG_H
 #define __LINUX_OF_REG_H
 
+struct regulator_desc;
+
 struct of_regulator_match {
 	const char *name;
 	void *driver_data;
@@ -16,14 +18,16 @@ struct of_regulator_match {
 #if defined(CONFIG_OF)
 extern struct regulator_init_data
 	*of_get_regulator_init_data(struct device *dev,
-				    struct device_node *node);
+				    struct device_node *node,
+				    const struct regulator_desc *desc);
 extern int of_regulator_match(struct device *dev, struct device_node *node,
 			      struct of_regulator_match *matches,
 			      unsigned int num_matches);
 #else
 static inline struct regulator_init_data
 	*of_get_regulator_init_data(struct device *dev,
-				    struct device_node *node)
+				    struct device_node *node,
+				    const struct regulator_desc *desc)
 {
 	return NULL;
 }
-- 
2.1.0

[PATCH v6 4/5] regulator: of: Pass the regulator description in the match table

[Javier Martinez Canillas]

Drivers can use the of_regulator_match() function to parse the regulator
init_data from DT. A match table is used to specify the name of the node
containing the regulators, the device node and to return the init_data
to the caller.

But also the static regulator descriptor is needed to correctly extract
some DT properties like the regulator initial and suspend modes. Use the
match table to pass that information.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---

This patch only adds the struct regulator_desc pointer to the struct
of_regulator_match and does not fill this in all the the drivers to
keep the series short. A following series will change all regulator
drivers to be sure that all of them pass it to of_regulator_match().

Changes in v6: None

 drivers/regulator/of_regulator.c       | 3 ++-
 include/linux/regulator/of_regulator.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 945486f..cbc1d71 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -221,7 +221,8 @@ int of_regulator_match(struct device *dev, struct device_node *node,
 				continue;
 
 			match->init_data =
-				of_get_regulator_init_data(dev, child, NULL);
+				of_get_regulator_init_data(dev, child,
+							   match->desc);
 			if (!match->init_data) {
 				dev_err(dev,
 					"failed to parse DT for regulator %s\n",
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
index 8d1d136..763953f 100644
--- a/include/linux/regulator/of_regulator.h
+++ b/include/linux/regulator/of_regulator.h
@@ -13,6 +13,7 @@ struct of_regulator_match {
 	void *driver_data;
 	struct regulator_init_data *init_data;
 	struct device_node *of_node;
+	const struct regulator_desc *desc;
 };
 
 #if defined(CONFIG_OF)
-- 
2.1.0

[PATCH v6 5/5] regulator: of: Add support for parsing initial and suspend modes

[Javier Martinez Canillas]

Some regulators support their operating mode to be changed on startup
or by consumers when the system is running while others only support
their operating mode to be changed while the system has entered in a
suspend state.

The regulator Device Tree binding documents a set of properties to
configure the regulators operating modes from a FDT. This patch builds
on (40e20d6 regulator: of: Add support for parsing regulator_state for
suspend state) and adds support to parse those properties and fill the
regulator constraints so the regulator core can call the right suspend
handlers when the system enters into sleep.

The modes are defined in the Device Tree using the hardware specific
modes supported by the regulators. Regulator drivers have to define a
translation function that is used to map the hardware specific modes
to the standard ones.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---

Changes in v6:
 - Don't ignore the value of .of_map_mode(). Suggested by Mark Brown.
 - Improve the warning message to better explain what the real issue is.
   Suggested by Mark Brown.

Changes in v5: None

Changes in v4:
 - Parse the properties in the core and map using driver provided functions.
   Suggested by Mark Brown

Changes in v3:
 - Use the standard suspend states binding instead of custom properties.
   Suggested by Mark Brown

 drivers/regulator/of_regulator.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index cbc1d71..91eaaf0 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -25,7 +25,8 @@ static const char *const regulator_states[PM_SUSPEND_MAX + 1] = {
 };
 
 static void of_get_regulation_constraints(struct device_node *np,
-					struct regulator_init_data **init_data)
+					struct regulator_init_data **init_data,
+					const struct regulator_desc *desc)
 {
 	const __be32 *min_uV, *max_uV;
 	struct regulation_constraints *constraints = &(*init_data)->constraints;
@@ -81,6 +82,19 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!ret)
 		constraints->enable_time = pval;
 
+	if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) {
+		if (desc && desc->of_map_mode) {
+			ret = desc->of_map_mode(pval);
+			if (ret == -EINVAL)
+				pr_err("%s: invalid mode %u\n", np->name, pval);
+			else
+				constraints->initial_mode = ret;
+		} else {
+			pr_warn("%s: mapping for mode %d not defined\n",
+				np->name, pval);
+		}
+	}
+
 	for (i = 0; i < ARRAY_SIZE(regulator_states); i++) {
 		switch (i) {
 		case PM_SUSPEND_MEM:
@@ -100,6 +114,21 @@ static void of_get_regulation_constraints(struct device_node *np,
 		if (!suspend_np || !suspend_state)
 			continue;
 
+		if (!of_property_read_u32(suspend_np, "regulator-mode",
+					  &pval)) {
+			if (desc && desc->of_map_mode) {
+				ret = desc->of_map_mode(pval);
+				if (ret == -EINVAL)
+					pr_err("%s: invalid mode %u\n",
+					       np->name, pval);
+				else
+					suspend_state->mode = ret;
+			} else {
+				pr_warn("%s: mapping for mode %d not defined\n",
+					np->name, pval);
+			}
+		}
+
 		if (of_property_read_bool(suspend_np,
 					"regulator-on-in-suspend"))
 			suspend_state->enabled = true;
@@ -140,7 +169,7 @@ struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
 	if (!init_data)
 		return NULL; /* Out of memory? */
 
-	of_get_regulation_constraints(node, &init_data);
+	of_get_regulation_constraints(node, &init_data, desc);
 	return init_data;
 }
 EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
-- 
2.1.0

Re: [PATCH v6 0/5] regulator: of: Add initial and suspend modes support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 456 bytes --]

On Mon, Nov 10, 2014 at 02:43:50PM +0100, Javier Martinez Canillas wrote:
> Hello Mark,
> 
> This is the sixth version of the series that adds regulator initial
> and suspend operating modes support. It relies on the existing work
> that added suspend states bindings. The opmodes are parsed by the
> regulator core and drivers should only define a translation function
> to map between hardware specific to standard modes.

Applied all, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]