From: Guenter Roeck <linux@roeck-us.net>
To: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jean Delvare <jdelvare@suse.de>,
Gabriele Mazzotta <gabriele.mzt@gmail.com>,
Steven Honeyman <stevenhoneyman@gmail.com>,
Jochen Eisinger <jochen@penguin-breeder.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] i8k: cosmetic: distinguish between fan speed and fan rpm
Date: Tue, 9 Dec 2014 14:49:02 -0800 [thread overview]
Message-ID: <20141209224902.GA23006@roeck-us.net> (raw)
In-Reply-To: <201412092139.29655@pali>
On Tue, Dec 09, 2014 at 09:39:29PM +0100, Pali Rohár wrote:
> On Tuesday 09 December 2014 21:23:04 Guenter Roeck wrote:
> > On Tue, Dec 09, 2014 at 09:06:59PM +0100, Pali Rohár wrote:
> > > Driver mix speed and rpm. Fan speed is value (0, 1, 2) which
> > > is used for configuring fan. This patch change comments,
> > > function names and other definitions so code should be
> > > unambiguous now.
> > >
> > > Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
> > > ---
> > > This patch is cosmetic and does not bring any change to
> > > code.
> >
> > For me "speed" and "rpm" are synonyms. So you are not really
> > clarifying anything. If anything, you make the code even more
> > confusing.
> >
> > Guenter
>
> Ok, what do you want to use instead "speed" and "rpm" to make it
> clear? We have function which returns RPM and other functions
> which get/set fan speed value (which is 0, 1 or 2). And new
> function (from patch 2) returns nominal RPM for fan speed value.
>
I would not touch the existing code at all.
Guenter
next prev parent reply other threads:[~2014-12-09 22:50 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-09 20:06 [PATCH 0/3] i8k: Rework fan_mult and fan_max code Pali Rohár
2014-12-09 20:06 ` [PATCH 1/3] i8k: cosmetic: distinguish between fan speed and fan rpm Pali Rohár
2014-12-09 20:23 ` Guenter Roeck
2014-12-09 20:39 ` Pali Rohár
2014-12-09 22:49 ` Guenter Roeck [this message]
2014-12-09 20:07 ` [PATCH 2/3] i8k: Autodetect maximal fan speed and fan RPM multiplier Pali Rohár
2014-12-09 20:20 ` Guenter Roeck
2014-12-09 20:23 ` Pali Rohár
2014-12-09 22:42 ` Guenter Roeck
2014-12-10 11:50 ` Pali Rohár
2014-12-10 14:08 ` Guenter Roeck
2014-12-18 11:13 ` Pali Rohár
2014-12-19 18:33 ` Guenter Roeck
2014-12-09 20:07 ` [PATCH 3/3] i8k: Remove laptop specific config data (fan_mult, fan_max) from driver Pali Rohár
2014-12-10 11:51 ` Pali Rohár
2014-12-10 13:32 ` Gabriele Mazzotta
2014-12-18 11:08 ` Pali Rohár
2014-12-18 15:08 ` Valdis.Kletnieks
2014-12-18 16:34 ` Pali Rohár
2014-12-18 16:44 ` Valdis.Kletnieks
2014-12-25 21:54 ` Gabriele Mazzotta
2014-12-27 14:13 ` Gabriele Mazzotta
2014-12-28 8:22 ` Pali Rohár
2014-12-28 8:28 ` Guenter Roeck
2014-12-28 8:46 ` Pali Rohár
2014-12-28 15:25 ` Gabriele Mazzotta
2014-12-28 15:48 ` Pali Rohár
2014-12-28 16:02 ` Gabriele Mazzotta
2014-12-28 16:07 ` Pali Rohár
2014-12-28 16:17 ` Gabriele Mazzotta
2014-12-29 12:22 ` Pali Rohár
2014-12-29 12:50 ` Gabriele Mazzotta
2014-12-30 7:35 ` Guenter Roeck
2014-12-17 17:54 ` Pali Rohár
2014-12-17 18:20 ` Steven Honeyman
2014-12-18 9:02 ` Valdis.Kletnieks
2014-12-18 11:11 ` Pali Rohár
2014-12-10 13:41 ` Gabriele Mazzotta
2014-12-19 18:04 ` [PATCH v2 1/2] i8k: Autodetect maximal fan speed and fan RPM multiplier Pali Rohár
2014-12-19 18:32 ` Guenter Roeck
2014-12-19 18:51 ` Pali Rohár
2014-12-19 19:28 ` Guenter Roeck
2014-12-20 8:57 ` Pali Rohár
2014-12-20 12:04 ` Guenter Roeck
2014-12-20 12:18 ` Pali Rohár
2014-12-20 12:44 ` Guenter Roeck
2014-12-20 12:54 ` Pali Rohár
2014-12-20 17:20 ` Guenter Roeck
2014-12-20 17:27 ` Steven Honeyman
2014-12-20 18:07 ` Guenter Roeck
2014-12-21 9:06 ` Pali Rohár
2014-12-20 18:38 ` Guenter Roeck
2014-12-21 9:13 ` Pali Rohár
2014-12-21 11:47 ` Guenter Roeck
2014-12-20 19:02 ` Guenter Roeck
2014-12-21 9:15 ` Pali Rohár
2014-12-21 9:20 ` [PATCH v3] " Pali Rohár
2014-12-21 11:57 ` Guenter Roeck
2014-12-21 12:09 ` Pali Rohár
2014-12-21 12:23 ` Guenter Roeck
2014-12-21 16:37 ` Pali Rohár
2014-12-21 16:55 ` Steven Honeyman
2014-12-21 17:25 ` Pali Rohár
2014-12-21 17:23 ` [PATCH v4] " Pali Rohár
2014-12-21 18:27 ` Guenter Roeck
2014-12-21 18:40 ` Pali Rohár
2014-12-21 18:51 ` Guenter Roeck
2014-12-21 19:56 ` Pali Rohár
2014-12-21 19:51 ` Guenter Roeck
2014-12-22 15:07 ` Pali Rohár
2014-12-23 13:52 ` Guenter Roeck
2014-12-23 19:11 ` Pali Rohár
2014-12-19 18:04 ` [PATCH v2 2/2] i8k: Remove DMI config data for Latitude E6x40 Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141209224902.GA23006@roeck-us.net \
--to=linux@roeck-us.net \
--cc=arnd@arndb.de \
--cc=gabriele.mzt@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jdelvare@suse.de \
--cc=jochen@penguin-breeder.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=stevenhoneyman@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).