linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pavel Machek <pavel@ucw.cz>
To: edubezval@gmail.com, rui.zhang@intel.com,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Cc: pali.rohar@gmail.com, sre@debian.org, sre@ring0.de,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org,
	aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com
Subject: [PATCH] thermal: add omap3 support
Date: Sat, 3 Jan 2015 12:11:46 +0100	[thread overview]
Message-ID: <20150103111146.GB7065@amd> (raw)

Add support for omap3430 sensor. Tested on Nokia N900.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

diff --git a/drivers/thermal/ti-soc-thermal/Kconfig b/drivers/thermal/ti-soc-thermal/Kconfig
index bd4c7be..a49495f 100644
--- a/drivers/thermal/ti-soc-thermal/Kconfig
+++ b/drivers/thermal/ti-soc-thermal/Kconfig
@@ -21,6 +21,15 @@ config TI_THERMAL
 	  This includes trip points definitions, extrapolation rules and
 	  CPU cooling device bindings.
 
+config OMAP3_THERMAL
+	bool "Texas Instruments OMAP3 thermal support"
+	depends on TI_SOC_THERMAL
+	depends on ARCH_OMAP3
+	help
+	  If you say yes here you get thermal support for the Texas Instruments
+	  OMAP3 SoC family. The current chip supported are:
+	   - OMAP3430
+
 config OMAP4_THERMAL
 	bool "Texas Instruments OMAP4 thermal support"
 	depends on TI_SOC_THERMAL
diff --git a/drivers/thermal/ti-soc-thermal/Makefile b/drivers/thermal/ti-soc-thermal/Makefile
index 1226b24..2b5b220 100644
--- a/drivers/thermal/ti-soc-thermal/Makefile
+++ b/drivers/thermal/ti-soc-thermal/Makefile
@@ -2,5 +2,6 @@ obj-$(CONFIG_TI_SOC_THERMAL)		+= ti-soc-thermal.o
 ti-soc-thermal-y			:= ti-bandgap.o
 ti-soc-thermal-$(CONFIG_TI_THERMAL)	+= ti-thermal-common.o
 ti-soc-thermal-$(CONFIG_DRA752_THERMAL)	+= dra752-thermal-data.o
+ti-soc-thermal-$(CONFIG_OMAP3_THERMAL)	+= omap3-thermal-data.o
 ti-soc-thermal-$(CONFIG_OMAP4_THERMAL)	+= omap4-thermal-data.o
 ti-soc-thermal-$(CONFIG_OMAP5_THERMAL)	+= omap5-thermal-data.o
diff --git a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
new file mode 100644
index 0000000..7c18766
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
@@ -0,0 +1,95 @@
+/*
+ * OMAP3 thermal driver.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Inc.
+ * Copyright (C) 2014 Pavel Machek <pavel@ucw.cz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
+
+/*
+ * OMAP34XX has one instance of thermal sensor for MPU
+ * need to describe the individual bit fields
+ */
+static struct temp_sensor_registers
+omap34xx_mpu_temp_sensor_registers = {
+	.temp_sensor_ctrl = 0,
+	.bgap_tempsoff_mask = 0, /* Unused, we don't have POWER_SWITCH */
+	.bgap_soc_mask = BIT(8),
+	.bgap_eocz_mask = BIT(7),
+	.bgap_dtemp_mask = 0x7f,
+
+	.bgap_mode_ctrl = 0,
+	.mode_ctrl_mask = BIT(9),
+
+	.bgap_efuse = 0,
+};
+
+/* Thresholds and limits for OMAP34XX MPU temperature sensor */
+static struct temp_sensor_data omap34xx_mpu_temp_sensor_data = {
+	.min_freq = 32768,
+	.max_freq = 32768,
+	.max_temp = -99000,
+	.min_temp = 99000,
+	.hyst_val = 5000,
+};
+
+/*
+ * Temperature values in milli degree celsius
+ */
+static const int
+omap34xx_adc_to_temp[128] = {
+	-40000, -40000, -40000, -40000, -40000, -39000, -38000, -36000,
+	-34000, -32000, -31000,	-29000, -28000, -26000, -25000, -24000,
+	-22000, -21000, -19000, -18000, -17000, -15000,	-14000, -12000,
+	-11000, -9000, -8000, -7000, -5000, -4000, -2000, -1000, 0000,
+	1000, 3000, 4000, 5000, 7000, 8000, 10000, 11000, 13000, 14000,
+	15000, 17000, 18000, 20000, 21000, 22000, 24000, 25000, 27000,
+	28000, 30000, 31000, 32000, 34000, 35000, 37000, 38000, 39000,
+	41000, 42000, 44000, 45000, 47000, 48000, 49000, 51000, 52000,
+	53000, 55000, 56000, 58000, 59000, 60000, 62000, 63000, 65000,
+	66000, 67000, 69000, 70000, 72000, 73000, 74000, 76000, 77000,
+	79000, 80000, 81000, 83000, 84000, 85000, 87000, 88000, 89000,
+	91000, 92000, 94000, 95000, 96000, 98000, 99000, 100000,
+	102000, 103000, 105000, 106000, 107000, 109000, 110000, 111000,
+	113000, 114000, 116000, 117000, 118000, 120000, 121000, 122000,
+	124000, 124000, 125000, 125000, 125000, 125000,	125000
+};
+
+/* OMAP34XX data */
+const struct ti_bandgap_data omap34xx_data = {
+	.features = TI_BANDGAP_FEATURE_CLK_CTRL /* | TI_BANDGAP_FEATURE_MODE_CONFIG */,
+	.fclock_name = "ts_fck",
+	.div_ck_name = "ts_fck",
+	.conv_table = omap34xx_adc_to_temp,
+	.adc_start_val = 0,
+	.adc_end_val = 127,
+	.expose_sensor = ti_thermal_expose_sensor,
+	.remove_sensor = ti_thermal_remove_sensor,
+
+	.sensors = {
+		{
+		.registers = &omap34xx_mpu_temp_sensor_registers,
+		.ts_data = &omap34xx_mpu_temp_sensor_data,
+		.domain = "cpu",
+		.slope = 0,
+		.constant = 20000,
+		.slope_pcb = 0,
+		.constant_pcb = 20000,
+		.register_cooling = NULL,
+		.unregister_cooling = NULL,
+		},
+	},
+	.sensor_count = 1,
+};
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 634b6ce..3b4e72f 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1509,6 +1531,12 @@ static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
 #endif
 
 static const struct of_device_id of_ti_bandgap_match[] = {
+#ifdef CONFIG_OMAP3_THERMAL
+	{
+		.compatible = "ti,omap34xx-bandgap",
+		.data = (void *)&omap34xx_data,
+	},
+#endif
 #ifdef CONFIG_OMAP4_THERMAL
 	{
 		.compatible = "ti,omap4430-bandgap",
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index b3adf72..3f05386 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -384,6 +384,8 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data);
 void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id);
 int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend);
 
+extern const struct ti_bandgap_data omap34xx_data;
+
 #ifdef CONFIG_OMAP4_THERMAL
 extern const struct ti_bandgap_data omap4430_data;
 extern const struct ti_bandgap_data omap4460_data;

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

             reply	other threads:[~2015-01-03 11:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-03 11:11 Pavel Machek [this message]
2015-01-03 12:34 ` [PATCH] thermal: add omap3 support Eduardo Valentin
2015-01-03 22:02   ` Pavel Machek
2015-01-05 21:41     ` Eduardo Valentin
2015-01-18 20:28 ` [PATCHv2] " Pavel Machek
2015-03-13  5:03   ` Eduardo Valentin
2015-03-13 19:40     ` Pavel Machek
2015-03-13 12:09   ` Pavel Machek
2015-03-13 16:53     ` Eduardo Valentin
2015-03-14 18:02       ` Pavel Machek
2015-03-23 11:25         ` Pavel Machek
2015-03-23 14:31   ` Eduardo Valentin
2015-03-23 15:58     ` Pavel Machek
2015-03-23 17:55       ` Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150103111146.GB7065@amd \
    --to=pavel@ucw.cz \
    --cc=aaro.koskinen@iki.fi \
    --cc=edubezval@gmail.com \
    --cc=ivo.g.dimitrov.75@gmail.com \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    --cc=rui.zhang@intel.com \
    --cc=sre@debian.org \
    --cc=sre@ring0.de \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).