* [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A
@ 2015-01-22 7:30 micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 1/9] mfd: rtsx: replace TAB by SPC after #define micky_ching
` (8 more replies)
0 siblings, 9 replies; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
resend:
- add lee jones ack for some patch.
v2:
- remove debug info when access failed.
- using macro list for phy register init.
- rename function for multi chip prefix with rtsx_base_
- save pcie_cap offset when init chip, not calling pci_find_capacity()
every time.
- add pcr->ops: write_phy/read_phy for special chip.
This patchset including re-format some coding-style and add two new chip
rts524A and rts525A.
Micky Ching (9):
mfd: rtsx: replace TAB by SPC after #define
mfd: rtsx: place register address and values togather
mfd: rtsx: update PETXCFG address
mfd: rtsx: update driving settings
mfd: rtsx: update phy register
mfd: rtsx: remove LCTLR defination
mfd: rtsx: add support for rts524A
mfd: rtsx: add support for rts525A
mfd: rtsx: using pcr_dbg replace dev_dbg
drivers/mfd/Makefile | 2 +-
drivers/mfd/rtl8411.c | 11 +-
drivers/mfd/rts5209.c | 4 +-
drivers/mfd/rts5227.c | 12 +-
drivers/mfd/rts5229.c | 4 +-
drivers/mfd/rts5249.c | 368 +++++++++++---
drivers/mfd/rtsx_gops.c | 37 --
drivers/mfd/rtsx_pcr.c | 109 +++--
drivers/mfd/rtsx_pcr.h | 8 +
include/linux/mfd/rtsx_pci.h | 1109 ++++++++++++++++++++++--------------------
10 files changed, 965 insertions(+), 699 deletions(-)
delete mode 100644 drivers/mfd/rtsx_gops.c
--
1.9.1
^ permalink raw reply [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 1/9] mfd: rtsx: replace TAB by SPC after #define
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
@ 2015-01-22 7:30 ` micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 2/9] mfd: rtsx: place register address and values togather micky_ching
` (7 subsequent siblings)
8 siblings, 0 replies; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
Re-format coding-style, using uniform SPC after "#define" keyword
instead of mixing using TAB and SPC.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
include/linux/mfd/rtsx_pci.h | 254 +++++++++++++++++++++----------------------
1 file changed, 127 insertions(+), 127 deletions(-)
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 0c12628..a9c2a14 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -175,9 +175,9 @@
/* CARD_SHARE_MODE */
#define CARD_SHARE_MASK 0x0F
#define CARD_SHARE_MULTI_LUN 0x00
-#define CARD_SHARE_NORMAL 0x00
-#define CARD_SHARE_48_SD 0x04
-#define CARD_SHARE_48_MS 0x08
+#define CARD_SHARE_NORMAL 0x00
+#define CARD_SHARE_48_SD 0x04
+#define CARD_SHARE_48_MS 0x08
/* CARD_SHARE_MODE for barossa */
#define CARD_SHARE_BAROSSA_SD 0x01
#define CARD_SHARE_BAROSSA_MS 0x02
@@ -249,76 +249,76 @@
#define CD_AUTO_DISABLE 0x40
/* SD_STAT1 */
-#define SD_CRC7_ERR 0x80
-#define SD_CRC16_ERR 0x40
-#define SD_CRC_WRITE_ERR 0x20
-#define SD_CRC_WRITE_ERR_MASK 0x1C
-#define GET_CRC_TIME_OUT 0x02
-#define SD_TUNING_COMPARE_ERR 0x01
+#define SD_CRC7_ERR 0x80
+#define SD_CRC16_ERR 0x40
+#define SD_CRC_WRITE_ERR 0x20
+#define SD_CRC_WRITE_ERR_MASK 0x1C
+#define GET_CRC_TIME_OUT 0x02
+#define SD_TUNING_COMPARE_ERR 0x01
/* SD_STAT2 */
-#define SD_RSP_80CLK_TIMEOUT 0x01
+#define SD_RSP_80CLK_TIMEOUT 0x01
/* SD_BUS_STAT */
-#define SD_CLK_TOGGLE_EN 0x80
-#define SD_CLK_FORCE_STOP 0x40
-#define SD_DAT3_STATUS 0x10
-#define SD_DAT2_STATUS 0x08
-#define SD_DAT1_STATUS 0x04
-#define SD_DAT0_STATUS 0x02
-#define SD_CMD_STATUS 0x01
+#define SD_CLK_TOGGLE_EN 0x80
+#define SD_CLK_FORCE_STOP 0x40
+#define SD_DAT3_STATUS 0x10
+#define SD_DAT2_STATUS 0x08
+#define SD_DAT1_STATUS 0x04
+#define SD_DAT0_STATUS 0x02
+#define SD_CMD_STATUS 0x01
/* SD_PAD_CTL */
-#define SD_IO_USING_1V8 0x80
-#define SD_IO_USING_3V3 0x7F
-#define TYPE_A_DRIVING 0x00
-#define TYPE_B_DRIVING 0x01
-#define TYPE_C_DRIVING 0x02
-#define TYPE_D_DRIVING 0x03
+#define SD_IO_USING_1V8 0x80
+#define SD_IO_USING_3V3 0x7F
+#define TYPE_A_DRIVING 0x00
+#define TYPE_B_DRIVING 0x01
+#define TYPE_C_DRIVING 0x02
+#define TYPE_D_DRIVING 0x03
/* SD_SAMPLE_POINT_CTL */
-#define DDR_FIX_RX_DAT 0x00
-#define DDR_VAR_RX_DAT 0x80
-#define DDR_FIX_RX_DAT_EDGE 0x00
-#define DDR_FIX_RX_DAT_14_DELAY 0x40
-#define DDR_FIX_RX_CMD 0x00
-#define DDR_VAR_RX_CMD 0x20
-#define DDR_FIX_RX_CMD_POS_EDGE 0x00
-#define DDR_FIX_RX_CMD_14_DELAY 0x10
-#define SD20_RX_POS_EDGE 0x00
-#define SD20_RX_14_DELAY 0x08
+#define DDR_FIX_RX_DAT 0x00
+#define DDR_VAR_RX_DAT 0x80
+#define DDR_FIX_RX_DAT_EDGE 0x00
+#define DDR_FIX_RX_DAT_14_DELAY 0x40
+#define DDR_FIX_RX_CMD 0x00
+#define DDR_VAR_RX_CMD 0x20
+#define DDR_FIX_RX_CMD_POS_EDGE 0x00
+#define DDR_FIX_RX_CMD_14_DELAY 0x10
+#define SD20_RX_POS_EDGE 0x00
+#define SD20_RX_14_DELAY 0x08
#define SD20_RX_SEL_MASK 0x08
/* SD_PUSH_POINT_CTL */
-#define DDR_FIX_TX_CMD_DAT 0x00
-#define DDR_VAR_TX_CMD_DAT 0x80
-#define DDR_FIX_TX_DAT_14_TSU 0x00
-#define DDR_FIX_TX_DAT_12_TSU 0x40
-#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
-#define DDR_FIX_TX_CMD_14_AHEAD 0x20
-#define SD20_TX_NEG_EDGE 0x00
-#define SD20_TX_14_AHEAD 0x10
+#define DDR_FIX_TX_CMD_DAT 0x00
+#define DDR_VAR_TX_CMD_DAT 0x80
+#define DDR_FIX_TX_DAT_14_TSU 0x00
+#define DDR_FIX_TX_DAT_12_TSU 0x40
+#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
+#define DDR_FIX_TX_CMD_14_AHEAD 0x20
+#define SD20_TX_NEG_EDGE 0x00
+#define SD20_TX_14_AHEAD 0x10
#define SD20_TX_SEL_MASK 0x10
-#define DDR_VAR_SDCLK_POL_SWAP 0x01
+#define DDR_VAR_SDCLK_POL_SWAP 0x01
/* SD_TRANSFER */
-#define SD_TRANSFER_START 0x80
-#define SD_TRANSFER_END 0x40
+#define SD_TRANSFER_START 0x80
+#define SD_TRANSFER_END 0x40
#define SD_STAT_IDLE 0x20
-#define SD_TRANSFER_ERR 0x10
+#define SD_TRANSFER_ERR 0x10
/* SD Transfer Mode definition */
-#define SD_TM_NORMAL_WRITE 0x00
-#define SD_TM_AUTO_WRITE_3 0x01
-#define SD_TM_AUTO_WRITE_4 0x02
-#define SD_TM_AUTO_READ_3 0x05
-#define SD_TM_AUTO_READ_4 0x06
-#define SD_TM_CMD_RSP 0x08
-#define SD_TM_AUTO_WRITE_1 0x09
-#define SD_TM_AUTO_WRITE_2 0x0A
-#define SD_TM_NORMAL_READ 0x0C
-#define SD_TM_AUTO_READ_1 0x0D
-#define SD_TM_AUTO_READ_2 0x0E
-#define SD_TM_AUTO_TUNING 0x0F
+#define SD_TM_NORMAL_WRITE 0x00
+#define SD_TM_AUTO_WRITE_3 0x01
+#define SD_TM_AUTO_WRITE_4 0x02
+#define SD_TM_AUTO_READ_3 0x05
+#define SD_TM_AUTO_READ_4 0x06
+#define SD_TM_CMD_RSP 0x08
+#define SD_TM_AUTO_WRITE_1 0x09
+#define SD_TM_AUTO_WRITE_2 0x0A
+#define SD_TM_NORMAL_READ 0x0C
+#define SD_TM_AUTO_READ_1 0x0D
+#define SD_TM_AUTO_READ_2 0x0E
+#define SD_TM_AUTO_TUNING 0x0F
/* SD_VPTX_CTL / SD_VPRX_CTL */
#define PHASE_CHANGE 0x80
@@ -332,15 +332,15 @@
/* SD Configure 1 Register */
#define SD_CLK_DIVIDE_0 0x00
-#define SD_CLK_DIVIDE_256 0xC0
-#define SD_CLK_DIVIDE_128 0x80
-#define SD_BUS_WIDTH_1BIT 0x00
-#define SD_BUS_WIDTH_4BIT 0x01
-#define SD_BUS_WIDTH_8BIT 0x02
-#define SD_ASYNC_FIFO_NOT_RST 0x10
-#define SD_20_MODE 0x00
-#define SD_DDR_MODE 0x04
-#define SD_30_MODE 0x08
+#define SD_CLK_DIVIDE_256 0xC0
+#define SD_CLK_DIVIDE_128 0x80
+#define SD_BUS_WIDTH_1BIT 0x00
+#define SD_BUS_WIDTH_4BIT 0x01
+#define SD_BUS_WIDTH_8BIT 0x02
+#define SD_ASYNC_FIFO_NOT_RST 0x10
+#define SD_20_MODE 0x00
+#define SD_DDR_MODE 0x04
+#define SD_30_MODE 0x08
#define SD_CLK_DIVIDE_MASK 0xC0
@@ -415,71 +415,71 @@
#define CLK_DIV_8 0x04
/* MS_CFG */
-#define SAMPLE_TIME_RISING 0x00
-#define SAMPLE_TIME_FALLING 0x80
-#define PUSH_TIME_DEFAULT 0x00
-#define PUSH_TIME_ODD 0x40
-#define NO_EXTEND_TOGGLE 0x00
-#define EXTEND_TOGGLE_CHK 0x20
-#define MS_BUS_WIDTH_1 0x00
-#define MS_BUS_WIDTH_4 0x10
-#define MS_BUS_WIDTH_8 0x18
-#define MS_2K_SECTOR_MODE 0x04
-#define MS_512_SECTOR_MODE 0x00
-#define MS_TOGGLE_TIMEOUT_EN 0x00
-#define MS_TOGGLE_TIMEOUT_DISEN 0x01
+#define SAMPLE_TIME_RISING 0x00
+#define SAMPLE_TIME_FALLING 0x80
+#define PUSH_TIME_DEFAULT 0x00
+#define PUSH_TIME_ODD 0x40
+#define NO_EXTEND_TOGGLE 0x00
+#define EXTEND_TOGGLE_CHK 0x20
+#define MS_BUS_WIDTH_1 0x00
+#define MS_BUS_WIDTH_4 0x10
+#define MS_BUS_WIDTH_8 0x18
+#define MS_2K_SECTOR_MODE 0x04
+#define MS_512_SECTOR_MODE 0x00
+#define MS_TOGGLE_TIMEOUT_EN 0x00
+#define MS_TOGGLE_TIMEOUT_DISEN 0x01
#define MS_NO_CHECK_INT 0x02
/* MS_TRANS_CFG */
-#define WAIT_INT 0x80
-#define NO_WAIT_INT 0x00
-#define NO_AUTO_READ_INT_REG 0x00
-#define AUTO_READ_INT_REG 0x40
-#define MS_CRC16_ERR 0x20
-#define MS_RDY_TIMEOUT 0x10
-#define MS_INT_CMDNK 0x08
-#define MS_INT_BREQ 0x04
-#define MS_INT_ERR 0x02
-#define MS_INT_CED 0x01
+#define WAIT_INT 0x80
+#define NO_WAIT_INT 0x00
+#define NO_AUTO_READ_INT_REG 0x00
+#define AUTO_READ_INT_REG 0x40
+#define MS_CRC16_ERR 0x20
+#define MS_RDY_TIMEOUT 0x10
+#define MS_INT_CMDNK 0x08
+#define MS_INT_BREQ 0x04
+#define MS_INT_ERR 0x02
+#define MS_INT_CED 0x01
/* MS_TRANSFER */
-#define MS_TRANSFER_START 0x80
-#define MS_TRANSFER_END 0x40
-#define MS_TRANSFER_ERR 0x20
-#define MS_BS_STATE 0x10
-#define MS_TM_READ_BYTES 0x00
-#define MS_TM_NORMAL_READ 0x01
-#define MS_TM_WRITE_BYTES 0x04
-#define MS_TM_NORMAL_WRITE 0x05
-#define MS_TM_AUTO_READ 0x08
-#define MS_TM_AUTO_WRITE 0x0C
+#define MS_TRANSFER_START 0x80
+#define MS_TRANSFER_END 0x40
+#define MS_TRANSFER_ERR 0x20
+#define MS_BS_STATE 0x10
+#define MS_TM_READ_BYTES 0x00
+#define MS_TM_NORMAL_READ 0x01
+#define MS_TM_WRITE_BYTES 0x04
+#define MS_TM_NORMAL_WRITE 0x05
+#define MS_TM_AUTO_READ 0x08
+#define MS_TM_AUTO_WRITE 0x0C
/* SD Configure 2 Register */
-#define SD_CALCULATE_CRC7 0x00
-#define SD_NO_CALCULATE_CRC7 0x80
-#define SD_CHECK_CRC16 0x00
-#define SD_NO_CHECK_CRC16 0x40
+#define SD_CALCULATE_CRC7 0x00
+#define SD_NO_CALCULATE_CRC7 0x80
+#define SD_CHECK_CRC16 0x00
+#define SD_NO_CHECK_CRC16 0x40
#define SD_NO_CHECK_WAIT_CRC_TO 0x20
-#define SD_WAIT_BUSY_END 0x08
-#define SD_NO_WAIT_BUSY_END 0x00
-#define SD_CHECK_CRC7 0x00
-#define SD_NO_CHECK_CRC7 0x04
-#define SD_RSP_LEN_0 0x00
-#define SD_RSP_LEN_6 0x01
-#define SD_RSP_LEN_17 0x02
+#define SD_WAIT_BUSY_END 0x08
+#define SD_NO_WAIT_BUSY_END 0x00
+#define SD_CHECK_CRC7 0x00
+#define SD_NO_CHECK_CRC7 0x04
+#define SD_RSP_LEN_0 0x00
+#define SD_RSP_LEN_6 0x01
+#define SD_RSP_LEN_17 0x02
/* SD/MMC Response Type Definition */
-#define SD_RSP_TYPE_R0 0x04
-#define SD_RSP_TYPE_R1 0x01
-#define SD_RSP_TYPE_R1b 0x09
-#define SD_RSP_TYPE_R2 0x02
-#define SD_RSP_TYPE_R3 0x05
-#define SD_RSP_TYPE_R4 0x05
-#define SD_RSP_TYPE_R5 0x01
-#define SD_RSP_TYPE_R6 0x01
-#define SD_RSP_TYPE_R7 0x01
+#define SD_RSP_TYPE_R0 0x04
+#define SD_RSP_TYPE_R1 0x01
+#define SD_RSP_TYPE_R1b 0x09
+#define SD_RSP_TYPE_R2 0x02
+#define SD_RSP_TYPE_R3 0x05
+#define SD_RSP_TYPE_R4 0x05
+#define SD_RSP_TYPE_R5 0x01
+#define SD_RSP_TYPE_R6 0x01
+#define SD_RSP_TYPE_R7 0x01
/* SD_CONFIGURE3 */
-#define SD_RSP_80CLK_TIMEOUT_EN 0x01
+#define SD_RSP_80CLK_TIMEOUT_EN 0x01
/* Card Transfer Reset Register */
#define SPI_STOP 0x01
@@ -574,13 +574,13 @@
#define SRCTL 0xFC13
-#define DCM_DRP_CTL 0xFC23
-#define DCM_DRP_TRIG 0xFC24
-#define DCM_DRP_CFG 0xFC25
-#define DCM_DRP_WR_DATA_L 0xFC26
-#define DCM_DRP_WR_DATA_H 0xFC27
-#define DCM_DRP_RD_DATA_L 0xFC28
-#define DCM_DRP_RD_DATA_H 0xFC29
+#define DCM_DRP_CTL 0xFC23
+#define DCM_DRP_TRIG 0xFC24
+#define DCM_DRP_CFG 0xFC25
+#define DCM_DRP_WR_DATA_L 0xFC26
+#define DCM_DRP_WR_DATA_H 0xFC27
+#define DCM_DRP_RD_DATA_L 0xFC28
+#define DCM_DRP_RD_DATA_H 0xFC29
#define SD_VPCLK0_CTL 0xFC2A
#define SD_VPCLK1_CTL 0xFC2B
#define SD_DCMPS0_CTL 0xFC2C
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 2/9] mfd: rtsx: place register address and values togather
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 1/9] mfd: rtsx: replace TAB by SPC after #define micky_ching
@ 2015-01-22 7:30 ` micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 3/9] mfd: rtsx: update PETXCFG address micky_ching
` (6 subsequent siblings)
8 siblings, 0 replies; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
It is more readable to place register address and values define
togather. The values define add two leading space indicate belong
to the register address defined above.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
include/linux/mfd/rtsx_pci.h | 836 +++++++++++++++++++------------------------
1 file changed, 369 insertions(+), 467 deletions(-)
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index a9c2a14..e81f2bb 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -28,74 +28,72 @@
#define MAX_RW_REG_CNT 1024
-/* PCI Operation Register Address */
#define RTSX_HCBAR 0x00
#define RTSX_HCBCTLR 0x04
+#define STOP_CMD (0x01 << 28)
+#define READ_REG_CMD 0
+#define WRITE_REG_CMD 1
+#define CHECK_REG_CMD 2
+
#define RTSX_HDBAR 0x08
+#define SG_INT 0x04
+#define SG_END 0x02
+#define SG_VALID 0x01
+#define SG_NO_OP 0x00
+#define SG_TRANS_DATA (0x02 << 4)
+#define SG_LINK_DESC (0x03 << 4)
#define RTSX_HDBCTLR 0x0C
+#define SDMA_MODE 0x00
+#define ADMA_MODE (0x02 << 26)
+#define STOP_DMA (0x01 << 28)
+#define TRIG_DMA (0x01 << 31)
+
#define RTSX_HAIMR 0x10
-#define RTSX_BIPR 0x14
-#define RTSX_BIER 0x18
+#define HAIMR_TRANS_START (0x01 << 31)
+#define HAIMR_READ 0x00
+#define HAIMR_WRITE (0x01 << 30)
+#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ)
+#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE)
+#define HAIMR_TRANS_END (HAIMR_TRANS_START)
-/* Host command buffer control register */
-#define STOP_CMD (0x01 << 28)
-
-/* Host data buffer control register */
-#define SDMA_MODE 0x00
-#define ADMA_MODE (0x02 << 26)
-#define STOP_DMA (0x01 << 28)
-#define TRIG_DMA (0x01 << 31)
-
-/* Host access internal memory register */
-#define HAIMR_TRANS_START (0x01 << 31)
-#define HAIMR_READ 0x00
-#define HAIMR_WRITE (0x01 << 30)
-#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ)
-#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE)
-#define HAIMR_TRANS_END (HAIMR_TRANS_START)
-
-/* Bus interrupt pending register */
-#define CMD_DONE_INT (1 << 31)
-#define DATA_DONE_INT (1 << 30)
-#define TRANS_OK_INT (1 << 29)
-#define TRANS_FAIL_INT (1 << 28)
-#define XD_INT (1 << 27)
-#define MS_INT (1 << 26)
-#define SD_INT (1 << 25)
-#define GPIO0_INT (1 << 24)
-#define OC_INT (1 << 23)
-#define SD_WRITE_PROTECT (1 << 19)
-#define XD_EXIST (1 << 18)
-#define MS_EXIST (1 << 17)
-#define SD_EXIST (1 << 16)
-#define DELINK_INT GPIO0_INT
-#define MS_OC_INT (1 << 23)
-#define SD_OC_INT (1 << 22)
+#define RTSX_BIPR 0x14
+#define CMD_DONE_INT (1 << 31)
+#define DATA_DONE_INT (1 << 30)
+#define TRANS_OK_INT (1 << 29)
+#define TRANS_FAIL_INT (1 << 28)
+#define XD_INT (1 << 27)
+#define MS_INT (1 << 26)
+#define SD_INT (1 << 25)
+#define GPIO0_INT (1 << 24)
+#define OC_INT (1 << 23)
+#define SD_WRITE_PROTECT (1 << 19)
+#define XD_EXIST (1 << 18)
+#define MS_EXIST (1 << 17)
+#define SD_EXIST (1 << 16)
+#define DELINK_INT GPIO0_INT
+#define MS_OC_INT (1 << 23)
+#define SD_OC_INT (1 << 22)
#define CARD_INT (XD_INT | MS_INT | SD_INT)
#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)
#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \
CARD_INT | GPIO0_INT | OC_INT)
-
#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST)
-/* Bus interrupt enable register */
-#define CMD_DONE_INT_EN (1 << 31)
-#define DATA_DONE_INT_EN (1 << 30)
-#define TRANS_OK_INT_EN (1 << 29)
-#define TRANS_FAIL_INT_EN (1 << 28)
-#define XD_INT_EN (1 << 27)
-#define MS_INT_EN (1 << 26)
-#define SD_INT_EN (1 << 25)
-#define GPIO0_INT_EN (1 << 24)
-#define OC_INT_EN (1 << 23)
-#define DELINK_INT_EN GPIO0_INT_EN
-#define MS_OC_INT_EN (1 << 23)
-#define SD_OC_INT_EN (1 << 22)
-
-#define READ_REG_CMD 0
-#define WRITE_REG_CMD 1
-#define CHECK_REG_CMD 2
+#define RTSX_BIER 0x18
+#define CMD_DONE_INT_EN (1 << 31)
+#define DATA_DONE_INT_EN (1 << 30)
+#define TRANS_OK_INT_EN (1 << 29)
+#define TRANS_FAIL_INT_EN (1 << 28)
+#define XD_INT_EN (1 << 27)
+#define MS_INT_EN (1 << 26)
+#define SD_INT_EN (1 << 25)
+#define GPIO0_INT_EN (1 << 24)
+#define OC_INT_EN (1 << 23)
+#define DELINK_INT_EN GPIO0_INT_EN
+#define MS_OC_INT_EN (1 << 23)
+#define SD_OC_INT_EN (1 << 22)
+
/*
* macros for easy use
@@ -125,423 +123,68 @@
#define rtsx_pci_write_config_dword(pcr, where, val) \
pci_write_config_dword((pcr)->pci, where, val)
-#define STATE_TRANS_NONE 0
-#define STATE_TRANS_CMD 1
-#define STATE_TRANS_BUF 2
-#define STATE_TRANS_SG 3
-
-#define TRANS_NOT_READY 0
-#define TRANS_RESULT_OK 1
-#define TRANS_RESULT_FAIL 2
-#define TRANS_NO_DEVICE 3
-
-#define RTSX_RESV_BUF_LEN 4096
-#define HOST_CMDS_BUF_LEN 1024
-#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
-#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8)
-#define MAX_SG_ITEM_LEN 0x80000
-
-#define HOST_TO_DEVICE 0
-#define DEVICE_TO_HOST 1
-
-#define RTSX_PHASE_MAX 32
-#define RX_TUNING_CNT 3
-
-/* SG descriptor */
-#define SG_INT 0x04
-#define SG_END 0x02
-#define SG_VALID 0x01
-
-#define SG_NO_OP 0x00
-#define SG_TRANS_DATA (0x02 << 4)
-#define SG_LINK_DESC (0x03 << 4)
-
-/* Output voltage */
-#define OUTPUT_3V3 0
-#define OUTPUT_1V8 1
-
-/* Card Clock Enable Register */
-#define SD_CLK_EN 0x04
-#define MS_CLK_EN 0x08
-
-/* Card Select Register */
-#define SD_MOD_SEL 2
-#define MS_MOD_SEL 3
-
-/* Card Output Enable Register */
-#define SD_OUTPUT_EN 0x04
-#define MS_OUTPUT_EN 0x08
-
-/* CARD_SHARE_MODE */
-#define CARD_SHARE_MASK 0x0F
-#define CARD_SHARE_MULTI_LUN 0x00
-#define CARD_SHARE_NORMAL 0x00
-#define CARD_SHARE_48_SD 0x04
-#define CARD_SHARE_48_MS 0x08
-/* CARD_SHARE_MODE for barossa */
-#define CARD_SHARE_BAROSSA_SD 0x01
-#define CARD_SHARE_BAROSSA_MS 0x02
-
-/* CARD_DRIVE_SEL */
-#define MS_DRIVE_8mA (0x01 << 6)
-#define MMC_DRIVE_8mA (0x01 << 4)
-#define XD_DRIVE_8mA (0x01 << 2)
-#define GPIO_DRIVE_8mA 0x01
-#define RTS5209_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\
- XD_DRIVE_8mA | GPIO_DRIVE_8mA)
-#define RTL8411_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\
- XD_DRIVE_8mA)
-#define RTSX_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | GPIO_DRIVE_8mA)
+#define STATE_TRANS_NONE 0
+#define STATE_TRANS_CMD 1
+#define STATE_TRANS_BUF 2
+#define STATE_TRANS_SG 3
-/* SD30_DRIVE_SEL */
-#define DRIVER_TYPE_A 0x05
-#define DRIVER_TYPE_B 0x03
-#define DRIVER_TYPE_C 0x02
-#define DRIVER_TYPE_D 0x01
-#define CFG_DRIVER_TYPE_A 0x02
-#define CFG_DRIVER_TYPE_B 0x03
-#define CFG_DRIVER_TYPE_C 0x01
-#define CFG_DRIVER_TYPE_D 0x00
-
-/* FPDCTL */
-#define SSC_POWER_DOWN 0x01
-#define SD_OC_POWER_DOWN 0x02
-#define ALL_POWER_DOWN 0x07
-#define OC_POWER_DOWN 0x06
-
-/* CLK_CTL */
-#define CHANGE_CLK 0x01
-
-/* LDO_CTL */
-#define BPP_ASIC_1V7 0x00
-#define BPP_ASIC_1V8 0x01
-#define BPP_ASIC_1V9 0x02
-#define BPP_ASIC_2V0 0x03
-#define BPP_ASIC_2V7 0x04
-#define BPP_ASIC_2V8 0x05
-#define BPP_ASIC_3V2 0x06
-#define BPP_ASIC_3V3 0x07
-#define BPP_REG_TUNED18 0x07
-#define BPP_TUNED18_SHIFT_8402 5
-#define BPP_TUNED18_SHIFT_8411 4
-#define BPP_PAD_MASK 0x04
-#define BPP_PAD_3V3 0x04
-#define BPP_PAD_1V8 0x00
-#define BPP_LDO_POWB 0x03
-#define BPP_LDO_ON 0x00
-#define BPP_LDO_SUSPEND 0x02
-#define BPP_LDO_OFF 0x03
-
-/* CD_PAD_CTL */
-#define CD_DISABLE_MASK 0x07
-#define MS_CD_DISABLE 0x04
-#define SD_CD_DISABLE 0x02
-#define XD_CD_DISABLE 0x01
-#define CD_DISABLE 0x07
-#define CD_ENABLE 0x00
-#define MS_CD_EN_ONLY 0x03
-#define SD_CD_EN_ONLY 0x05
-#define XD_CD_EN_ONLY 0x06
-#define FORCE_CD_LOW_MASK 0x38
-#define FORCE_CD_XD_LOW 0x08
-#define FORCE_CD_SD_LOW 0x10
-#define FORCE_CD_MS_LOW 0x20
-#define CD_AUTO_DISABLE 0x40
-
-/* SD_STAT1 */
-#define SD_CRC7_ERR 0x80
-#define SD_CRC16_ERR 0x40
-#define SD_CRC_WRITE_ERR 0x20
-#define SD_CRC_WRITE_ERR_MASK 0x1C
-#define GET_CRC_TIME_OUT 0x02
-#define SD_TUNING_COMPARE_ERR 0x01
-
-/* SD_STAT2 */
-#define SD_RSP_80CLK_TIMEOUT 0x01
-
-/* SD_BUS_STAT */
-#define SD_CLK_TOGGLE_EN 0x80
-#define SD_CLK_FORCE_STOP 0x40
-#define SD_DAT3_STATUS 0x10
-#define SD_DAT2_STATUS 0x08
-#define SD_DAT1_STATUS 0x04
-#define SD_DAT0_STATUS 0x02
-#define SD_CMD_STATUS 0x01
-
-/* SD_PAD_CTL */
-#define SD_IO_USING_1V8 0x80
-#define SD_IO_USING_3V3 0x7F
-#define TYPE_A_DRIVING 0x00
-#define TYPE_B_DRIVING 0x01
-#define TYPE_C_DRIVING 0x02
-#define TYPE_D_DRIVING 0x03
-
-/* SD_SAMPLE_POINT_CTL */
-#define DDR_FIX_RX_DAT 0x00
-#define DDR_VAR_RX_DAT 0x80
-#define DDR_FIX_RX_DAT_EDGE 0x00
-#define DDR_FIX_RX_DAT_14_DELAY 0x40
-#define DDR_FIX_RX_CMD 0x00
-#define DDR_VAR_RX_CMD 0x20
-#define DDR_FIX_RX_CMD_POS_EDGE 0x00
-#define DDR_FIX_RX_CMD_14_DELAY 0x10
-#define SD20_RX_POS_EDGE 0x00
-#define SD20_RX_14_DELAY 0x08
-#define SD20_RX_SEL_MASK 0x08
+#define TRANS_NOT_READY 0
+#define TRANS_RESULT_OK 1
+#define TRANS_RESULT_FAIL 2
+#define TRANS_NO_DEVICE 3
-/* SD_PUSH_POINT_CTL */
-#define DDR_FIX_TX_CMD_DAT 0x00
-#define DDR_VAR_TX_CMD_DAT 0x80
-#define DDR_FIX_TX_DAT_14_TSU 0x00
-#define DDR_FIX_TX_DAT_12_TSU 0x40
-#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
-#define DDR_FIX_TX_CMD_14_AHEAD 0x20
-#define SD20_TX_NEG_EDGE 0x00
-#define SD20_TX_14_AHEAD 0x10
-#define SD20_TX_SEL_MASK 0x10
-#define DDR_VAR_SDCLK_POL_SWAP 0x01
-
-/* SD_TRANSFER */
-#define SD_TRANSFER_START 0x80
-#define SD_TRANSFER_END 0x40
-#define SD_STAT_IDLE 0x20
-#define SD_TRANSFER_ERR 0x10
-/* SD Transfer Mode definition */
-#define SD_TM_NORMAL_WRITE 0x00
-#define SD_TM_AUTO_WRITE_3 0x01
-#define SD_TM_AUTO_WRITE_4 0x02
-#define SD_TM_AUTO_READ_3 0x05
-#define SD_TM_AUTO_READ_4 0x06
-#define SD_TM_CMD_RSP 0x08
-#define SD_TM_AUTO_WRITE_1 0x09
-#define SD_TM_AUTO_WRITE_2 0x0A
-#define SD_TM_NORMAL_READ 0x0C
-#define SD_TM_AUTO_READ_1 0x0D
-#define SD_TM_AUTO_READ_2 0x0E
-#define SD_TM_AUTO_TUNING 0x0F
-
-/* SD_VPTX_CTL / SD_VPRX_CTL */
-#define PHASE_CHANGE 0x80
-#define PHASE_NOT_RESET 0x40
-
-/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */
-#define DCMPS_CHANGE 0x80
-#define DCMPS_CHANGE_DONE 0x40
-#define DCMPS_ERROR 0x20
-#define DCMPS_CURRENT_PHASE 0x1F
-
-/* SD Configure 1 Register */
-#define SD_CLK_DIVIDE_0 0x00
-#define SD_CLK_DIVIDE_256 0xC0
-#define SD_CLK_DIVIDE_128 0x80
-#define SD_BUS_WIDTH_1BIT 0x00
-#define SD_BUS_WIDTH_4BIT 0x01
-#define SD_BUS_WIDTH_8BIT 0x02
-#define SD_ASYNC_FIFO_NOT_RST 0x10
-#define SD_20_MODE 0x00
-#define SD_DDR_MODE 0x04
-#define SD_30_MODE 0x08
-
-#define SD_CLK_DIVIDE_MASK 0xC0
-
-/* SD_CMD_STATE */
-#define SD_CMD_IDLE 0x80
-
-/* SD_DATA_STATE */
-#define SD_DATA_IDLE 0x80
-
-/* DCM_DRP_CTL */
-#define DCM_RESET 0x08
-#define DCM_LOCKED 0x04
-#define DCM_208M 0x00
-#define DCM_TX 0x01
-#define DCM_RX 0x02
-
-/* DCM_DRP_TRIG */
-#define DRP_START 0x80
-#define DRP_DONE 0x40
-
-/* DCM_DRP_CFG */
-#define DRP_WRITE 0x80
-#define DRP_READ 0x00
-#define DCM_WRITE_ADDRESS_50 0x50
-#define DCM_WRITE_ADDRESS_51 0x51
-#define DCM_READ_ADDRESS_00 0x00
-#define DCM_READ_ADDRESS_51 0x51
-
-/* IRQSTAT0 */
-#define DMA_DONE_INT 0x80
-#define SUSPEND_INT 0x40
-#define LINK_RDY_INT 0x20
-#define LINK_DOWN_INT 0x10
-
-/* DMACTL */
-#define DMA_RST 0x80
-#define DMA_BUSY 0x04
-#define DMA_DIR_TO_CARD 0x00
-#define DMA_DIR_FROM_CARD 0x02
-#define DMA_EN 0x01
-#define DMA_128 (0 << 4)
-#define DMA_256 (1 << 4)
-#define DMA_512 (2 << 4)
-#define DMA_1024 (3 << 4)
-#define DMA_PACK_SIZE_MASK 0x30
-
-/* SSC_CTL1 */
-#define SSC_RSTB 0x80
-#define SSC_8X_EN 0x40
-#define SSC_FIX_FRAC 0x20
-#define SSC_SEL_1M 0x00
-#define SSC_SEL_2M 0x08
-#define SSC_SEL_4M 0x10
-#define SSC_SEL_8M 0x18
-
-/* SSC_CTL2 */
-#define SSC_DEPTH_MASK 0x07
-#define SSC_DEPTH_DISALBE 0x00
-#define SSC_DEPTH_4M 0x01
-#define SSC_DEPTH_2M 0x02
-#define SSC_DEPTH_1M 0x03
-#define SSC_DEPTH_500K 0x04
-#define SSC_DEPTH_250K 0x05
-
-/* System Clock Control Register */
-#define CLK_LOW_FREQ 0x01
-
-/* System Clock Divider Register */
-#define CLK_DIV_1 0x01
-#define CLK_DIV_2 0x02
-#define CLK_DIV_4 0x03
-#define CLK_DIV_8 0x04
-
-/* MS_CFG */
-#define SAMPLE_TIME_RISING 0x00
-#define SAMPLE_TIME_FALLING 0x80
-#define PUSH_TIME_DEFAULT 0x00
-#define PUSH_TIME_ODD 0x40
-#define NO_EXTEND_TOGGLE 0x00
-#define EXTEND_TOGGLE_CHK 0x20
-#define MS_BUS_WIDTH_1 0x00
-#define MS_BUS_WIDTH_4 0x10
-#define MS_BUS_WIDTH_8 0x18
-#define MS_2K_SECTOR_MODE 0x04
-#define MS_512_SECTOR_MODE 0x00
-#define MS_TOGGLE_TIMEOUT_EN 0x00
-#define MS_TOGGLE_TIMEOUT_DISEN 0x01
-#define MS_NO_CHECK_INT 0x02
+#define RTSX_RESV_BUF_LEN 4096
+#define HOST_CMDS_BUF_LEN 1024
+#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
+#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8)
+#define MAX_SG_ITEM_LEN 0x80000
+#define HOST_TO_DEVICE 0
+#define DEVICE_TO_HOST 1
+
+#define OUTPUT_3V3 0
+#define OUTPUT_1V8 1
-/* MS_TRANS_CFG */
-#define WAIT_INT 0x80
-#define NO_WAIT_INT 0x00
-#define NO_AUTO_READ_INT_REG 0x00
-#define AUTO_READ_INT_REG 0x40
-#define MS_CRC16_ERR 0x20
-#define MS_RDY_TIMEOUT 0x10
-#define MS_INT_CMDNK 0x08
-#define MS_INT_BREQ 0x04
-#define MS_INT_ERR 0x02
-#define MS_INT_CED 0x01
-
-/* MS_TRANSFER */
-#define MS_TRANSFER_START 0x80
-#define MS_TRANSFER_END 0x40
-#define MS_TRANSFER_ERR 0x20
-#define MS_BS_STATE 0x10
-#define MS_TM_READ_BYTES 0x00
-#define MS_TM_NORMAL_READ 0x01
-#define MS_TM_WRITE_BYTES 0x04
-#define MS_TM_NORMAL_WRITE 0x05
-#define MS_TM_AUTO_READ 0x08
-#define MS_TM_AUTO_WRITE 0x0C
-
-/* SD Configure 2 Register */
-#define SD_CALCULATE_CRC7 0x00
-#define SD_NO_CALCULATE_CRC7 0x80
-#define SD_CHECK_CRC16 0x00
-#define SD_NO_CHECK_CRC16 0x40
-#define SD_NO_CHECK_WAIT_CRC_TO 0x20
-#define SD_WAIT_BUSY_END 0x08
-#define SD_NO_WAIT_BUSY_END 0x00
-#define SD_CHECK_CRC7 0x00
-#define SD_NO_CHECK_CRC7 0x04
-#define SD_RSP_LEN_0 0x00
-#define SD_RSP_LEN_6 0x01
-#define SD_RSP_LEN_17 0x02
-/* SD/MMC Response Type Definition */
-#define SD_RSP_TYPE_R0 0x04
-#define SD_RSP_TYPE_R1 0x01
-#define SD_RSP_TYPE_R1b 0x09
-#define SD_RSP_TYPE_R2 0x02
-#define SD_RSP_TYPE_R3 0x05
-#define SD_RSP_TYPE_R4 0x05
-#define SD_RSP_TYPE_R5 0x01
-#define SD_RSP_TYPE_R6 0x01
-#define SD_RSP_TYPE_R7 0x01
-
-/* SD_CONFIGURE3 */
-#define SD_RSP_80CLK_TIMEOUT_EN 0x01
-
-/* Card Transfer Reset Register */
-#define SPI_STOP 0x01
-#define XD_STOP 0x02
-#define SD_STOP 0x04
-#define MS_STOP 0x08
-#define SPI_CLR_ERR 0x10
-#define XD_CLR_ERR 0x20
-#define SD_CLR_ERR 0x40
-#define MS_CLR_ERR 0x80
-
-/* Card Data Source Register */
-#define PINGPONG_BUFFER 0x01
-#define RING_BUFFER 0x00
-
-/* Card Power Control Register */
-#define PMOS_STRG_MASK 0x10
-#define PMOS_STRG_800mA 0x10
-#define PMOS_STRG_400mA 0x00
-#define SD_POWER_OFF 0x03
-#define SD_PARTIAL_POWER_ON 0x01
-#define SD_POWER_ON 0x00
-#define SD_POWER_MASK 0x03
-#define MS_POWER_OFF 0x0C
-#define MS_PARTIAL_POWER_ON 0x04
-#define MS_POWER_ON 0x00
-#define MS_POWER_MASK 0x0C
-#define BPP_POWER_OFF 0x0F
-#define BPP_POWER_5_PERCENT_ON 0x0E
-#define BPP_POWER_10_PERCENT_ON 0x0C
-#define BPP_POWER_15_PERCENT_ON 0x08
-#define BPP_POWER_ON 0x00
-#define BPP_POWER_MASK 0x0F
-#define SD_VCC_PARTIAL_POWER_ON 0x02
-#define SD_VCC_POWER_ON 0x00
-
-/* PWR_GATE_CTRL */
-#define PWR_GATE_EN 0x01
-#define LDO3318_PWR_MASK 0x06
-#define LDO_ON 0x00
-#define LDO_SUSPEND 0x04
-#define LDO_OFF 0x06
-
-/* CARD_CLK_SOURCE */
-#define CRC_FIX_CLK (0x00 << 0)
-#define CRC_VAR_CLK0 (0x01 << 0)
-#define CRC_VAR_CLK1 (0x02 << 0)
-#define SD30_FIX_CLK (0x00 << 2)
-#define SD30_VAR_CLK0 (0x01 << 2)
-#define SD30_VAR_CLK1 (0x02 << 2)
-#define SAMPLE_FIX_CLK (0x00 << 4)
-#define SAMPLE_VAR_CLK0 (0x01 << 4)
-#define SAMPLE_VAR_CLK1 (0x02 << 4)
-
-/* HOST_SLEEP_STATE */
-#define HOST_ENTER_S1 1
-#define HOST_ENTER_S3 2
+#define RTSX_PHASE_MAX 32
+#define RX_TUNING_CNT 3
#define MS_CFG 0xFD40
+#define SAMPLE_TIME_RISING 0x00
+#define SAMPLE_TIME_FALLING 0x80
+#define PUSH_TIME_DEFAULT 0x00
+#define PUSH_TIME_ODD 0x40
+#define NO_EXTEND_TOGGLE 0x00
+#define EXTEND_TOGGLE_CHK 0x20
+#define MS_BUS_WIDTH_1 0x00
+#define MS_BUS_WIDTH_4 0x10
+#define MS_BUS_WIDTH_8 0x18
+#define MS_2K_SECTOR_MODE 0x04
+#define MS_512_SECTOR_MODE 0x00
+#define MS_TOGGLE_TIMEOUT_EN 0x00
+#define MS_TOGGLE_TIMEOUT_DISEN 0x01
+#define MS_NO_CHECK_INT 0x02
#define MS_TPC 0xFD41
#define MS_TRANS_CFG 0xFD42
+#define WAIT_INT 0x80
+#define NO_WAIT_INT 0x00
+#define NO_AUTO_READ_INT_REG 0x00
+#define AUTO_READ_INT_REG 0x40
+#define MS_CRC16_ERR 0x20
+#define MS_RDY_TIMEOUT 0x10
+#define MS_INT_CMDNK 0x08
+#define MS_INT_BREQ 0x04
+#define MS_INT_ERR 0x02
+#define MS_INT_CED 0x01
#define MS_TRANSFER 0xFD43
+#define MS_TRANSFER_START 0x80
+#define MS_TRANSFER_END 0x40
+#define MS_TRANSFER_ERR 0x20
+#define MS_BS_STATE 0x10
+#define MS_TM_READ_BYTES 0x00
+#define MS_TM_NORMAL_READ 0x01
+#define MS_TM_WRITE_BYTES 0x04
+#define MS_TM_NORMAL_WRITE 0x05
+#define MS_TM_AUTO_READ 0x08
+#define MS_TM_AUTO_WRITE 0x0C
#define MS_INT_REG 0xFD44
#define MS_BYTE_CNT 0xFD45
#define MS_SECTOR_CNT_L 0xFD46
@@ -549,14 +192,90 @@
#define MS_DBUS_H 0xFD48
#define SD_CFG1 0xFDA0
+#define SD_CLK_DIVIDE_0 0x00
+#define SD_CLK_DIVIDE_256 0xC0
+#define SD_CLK_DIVIDE_128 0x80
+#define SD_BUS_WIDTH_1BIT 0x00
+#define SD_BUS_WIDTH_4BIT 0x01
+#define SD_BUS_WIDTH_8BIT 0x02
+#define SD_ASYNC_FIFO_NOT_RST 0x10
+#define SD_20_MODE 0x00
+#define SD_DDR_MODE 0x04
+#define SD_30_MODE 0x08
+#define SD_CLK_DIVIDE_MASK 0xC0
#define SD_CFG2 0xFDA1
+#define SD_CALCULATE_CRC7 0x00
+#define SD_NO_CALCULATE_CRC7 0x80
+#define SD_CHECK_CRC16 0x00
+#define SD_NO_CHECK_CRC16 0x40
+#define SD_NO_CHECK_WAIT_CRC_TO 0x20
+#define SD_WAIT_BUSY_END 0x08
+#define SD_NO_WAIT_BUSY_END 0x00
+#define SD_CHECK_CRC7 0x00
+#define SD_NO_CHECK_CRC7 0x04
+#define SD_RSP_LEN_0 0x00
+#define SD_RSP_LEN_6 0x01
+#define SD_RSP_LEN_17 0x02
+#define SD_RSP_TYPE_R0 0x04
+#define SD_RSP_TYPE_R1 0x01
+#define SD_RSP_TYPE_R1b 0x09
+#define SD_RSP_TYPE_R2 0x02
+#define SD_RSP_TYPE_R3 0x05
+#define SD_RSP_TYPE_R4 0x05
+#define SD_RSP_TYPE_R5 0x01
+#define SD_RSP_TYPE_R6 0x01
+#define SD_RSP_TYPE_R7 0x01
#define SD_CFG3 0xFDA2
+#define SD_RSP_80CLK_TIMEOUT_EN 0x01
+
#define SD_STAT1 0xFDA3
+#define SD_CRC7_ERR 0x80
+#define SD_CRC16_ERR 0x40
+#define SD_CRC_WRITE_ERR 0x20
+#define SD_CRC_WRITE_ERR_MASK 0x1C
+#define GET_CRC_TIME_OUT 0x02
+#define SD_TUNING_COMPARE_ERR 0x01
#define SD_STAT2 0xFDA4
+#define SD_RSP_80CLK_TIMEOUT 0x01
+
#define SD_BUS_STAT 0xFDA5
+#define SD_CLK_TOGGLE_EN 0x80
+#define SD_CLK_FORCE_STOP 0x40
+#define SD_DAT3_STATUS 0x10
+#define SD_DAT2_STATUS 0x08
+#define SD_DAT1_STATUS 0x04
+#define SD_DAT0_STATUS 0x02
+#define SD_CMD_STATUS 0x01
#define SD_PAD_CTL 0xFDA6
+#define SD_IO_USING_1V8 0x80
+#define SD_IO_USING_3V3 0x7F
+#define TYPE_A_DRIVING 0x00
+#define TYPE_B_DRIVING 0x01
+#define TYPE_C_DRIVING 0x02
+#define TYPE_D_DRIVING 0x03
#define SD_SAMPLE_POINT_CTL 0xFDA7
+#define DDR_FIX_RX_DAT 0x00
+#define DDR_VAR_RX_DAT 0x80
+#define DDR_FIX_RX_DAT_EDGE 0x00
+#define DDR_FIX_RX_DAT_14_DELAY 0x40
+#define DDR_FIX_RX_CMD 0x00
+#define DDR_VAR_RX_CMD 0x20
+#define DDR_FIX_RX_CMD_POS_EDGE 0x00
+#define DDR_FIX_RX_CMD_14_DELAY 0x10
+#define SD20_RX_POS_EDGE 0x00
+#define SD20_RX_14_DELAY 0x08
+#define SD20_RX_SEL_MASK 0x08
#define SD_PUSH_POINT_CTL 0xFDA8
+#define DDR_FIX_TX_CMD_DAT 0x00
+#define DDR_VAR_TX_CMD_DAT 0x80
+#define DDR_FIX_TX_DAT_14_TSU 0x00
+#define DDR_FIX_TX_DAT_12_TSU 0x40
+#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
+#define DDR_FIX_TX_CMD_14_AHEAD 0x20
+#define SD20_TX_NEG_EDGE 0x00
+#define SD20_TX_14_AHEAD 0x10
+#define SD20_TX_SEL_MASK 0x10
+#define DDR_VAR_SDCLK_POL_SWAP 0x01
#define SD_CMD0 0xFDA9
#define SD_CMD_START 0x40
#define SD_CMD1 0xFDAA
@@ -569,14 +288,46 @@
#define SD_BLOCK_CNT_L 0xFDB1
#define SD_BLOCK_CNT_H 0xFDB2
#define SD_TRANSFER 0xFDB3
+#define SD_TRANSFER_START 0x80
+#define SD_TRANSFER_END 0x40
+#define SD_STAT_IDLE 0x20
+#define SD_TRANSFER_ERR 0x10
+#define SD_TM_NORMAL_WRITE 0x00
+#define SD_TM_AUTO_WRITE_3 0x01
+#define SD_TM_AUTO_WRITE_4 0x02
+#define SD_TM_AUTO_READ_3 0x05
+#define SD_TM_AUTO_READ_4 0x06
+#define SD_TM_CMD_RSP 0x08
+#define SD_TM_AUTO_WRITE_1 0x09
+#define SD_TM_AUTO_WRITE_2 0x0A
+#define SD_TM_NORMAL_READ 0x0C
+#define SD_TM_AUTO_READ_1 0x0D
+#define SD_TM_AUTO_READ_2 0x0E
+#define SD_TM_AUTO_TUNING 0x0F
#define SD_CMD_STATE 0xFDB5
+#define SD_CMD_IDLE 0x80
+
#define SD_DATA_STATE 0xFDB6
+#define SD_DATA_IDLE 0x80
#define SRCTL 0xFC13
#define DCM_DRP_CTL 0xFC23
+#define DCM_RESET 0x08
+#define DCM_LOCKED 0x04
+#define DCM_208M 0x00
+#define DCM_TX 0x01
+#define DCM_RX 0x02
#define DCM_DRP_TRIG 0xFC24
+#define DRP_START 0x80
+#define DRP_DONE 0x40
#define DCM_DRP_CFG 0xFC25
+#define DRP_WRITE 0x80
+#define DRP_READ 0x00
+#define DCM_WRITE_ADDRESS_50 0x50
+#define DCM_WRITE_ADDRESS_51 0x51
+#define DCM_READ_ADDRESS_00 0x00
+#define DCM_READ_ADDRESS_51 0x51
#define DCM_DRP_WR_DATA_L 0xFC26
#define DCM_DRP_WR_DATA_H 0xFC27
#define DCM_DRP_RD_DATA_L 0xFC28
@@ -587,42 +338,153 @@
#define SD_DCMPS1_CTL 0xFC2D
#define SD_VPTX_CTL SD_VPCLK0_CTL
#define SD_VPRX_CTL SD_VPCLK1_CTL
+#define PHASE_CHANGE 0x80
+#define PHASE_NOT_RESET 0x40
#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL
#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL
+#define DCMPS_CHANGE 0x80
+#define DCMPS_CHANGE_DONE 0x40
+#define DCMPS_ERROR 0x20
+#define DCMPS_CURRENT_PHASE 0x1F
#define CARD_CLK_SOURCE 0xFC2E
-
+#define CRC_FIX_CLK (0x00 << 0)
+#define CRC_VAR_CLK0 (0x01 << 0)
+#define CRC_VAR_CLK1 (0x02 << 0)
+#define SD30_FIX_CLK (0x00 << 2)
+#define SD30_VAR_CLK0 (0x01 << 2)
+#define SD30_VAR_CLK1 (0x02 << 2)
+#define SAMPLE_FIX_CLK (0x00 << 4)
+#define SAMPLE_VAR_CLK0 (0x01 << 4)
+#define SAMPLE_VAR_CLK1 (0x02 << 4)
#define CARD_PWR_CTL 0xFD50
+#define PMOS_STRG_MASK 0x10
+#define PMOS_STRG_800mA 0x10
+#define PMOS_STRG_400mA 0x00
+#define SD_POWER_OFF 0x03
+#define SD_PARTIAL_POWER_ON 0x01
+#define SD_POWER_ON 0x00
+#define SD_POWER_MASK 0x03
+#define MS_POWER_OFF 0x0C
+#define MS_PARTIAL_POWER_ON 0x04
+#define MS_POWER_ON 0x00
+#define MS_POWER_MASK 0x0C
+#define BPP_POWER_OFF 0x0F
+#define BPP_POWER_5_PERCENT_ON 0x0E
+#define BPP_POWER_10_PERCENT_ON 0x0C
+#define BPP_POWER_15_PERCENT_ON 0x08
+#define BPP_POWER_ON 0x00
+#define BPP_POWER_MASK 0x0F
+#define SD_VCC_PARTIAL_POWER_ON 0x02
+#define SD_VCC_POWER_ON 0x00
#define CARD_CLK_SWITCH 0xFD51
#define RTL8411B_PACKAGE_MODE 0xFD51
#define CARD_SHARE_MODE 0xFD52
+#define CARD_SHARE_MASK 0x0F
+#define CARD_SHARE_MULTI_LUN 0x00
+#define CARD_SHARE_NORMAL 0x00
+#define CARD_SHARE_48_SD 0x04
+#define CARD_SHARE_48_MS 0x08
+#define CARD_SHARE_BAROSSA_SD 0x01
+#define CARD_SHARE_BAROSSA_MS 0x02
#define CARD_DRIVE_SEL 0xFD53
+#define MS_DRIVE_8mA (0x01 << 6)
+#define MMC_DRIVE_8mA (0x01 << 4)
+#define XD_DRIVE_8mA (0x01 << 2)
+#define GPIO_DRIVE_8mA 0x01
+#define RTS5209_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\
+ XD_DRIVE_8mA | GPIO_DRIVE_8mA)
+#define RTL8411_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\
+ XD_DRIVE_8mA)
+#define RTSX_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | GPIO_DRIVE_8mA)
+
#define CARD_STOP 0xFD54
+#define SPI_STOP 0x01
+#define XD_STOP 0x02
+#define SD_STOP 0x04
+#define MS_STOP 0x08
+#define SPI_CLR_ERR 0x10
+#define XD_CLR_ERR 0x20
+#define SD_CLR_ERR 0x40
+#define MS_CLR_ERR 0x80
#define CARD_OE 0xFD55
+#define SD_OUTPUT_EN 0x04
+#define MS_OUTPUT_EN 0x08
#define CARD_AUTO_BLINK 0xFD56
#define CARD_GPIO_DIR 0xFD57
#define CARD_GPIO 0xFD58
#define CARD_DATA_SOURCE 0xFD5B
+#define PINGPONG_BUFFER 0x01
+#define RING_BUFFER 0x00
#define SD30_CLK_DRIVE_SEL 0xFD5A
+#define DRIVER_TYPE_A 0x05
+#define DRIVER_TYPE_B 0x03
+#define DRIVER_TYPE_C 0x02
+#define DRIVER_TYPE_D 0x01
#define CARD_SELECT 0xFD5C
+#define SD_MOD_SEL 2
+#define MS_MOD_SEL 3
#define SD30_DRIVE_SEL 0xFD5E
+#define CFG_DRIVER_TYPE_A 0x02
+#define CFG_DRIVER_TYPE_B 0x03
+#define CFG_DRIVER_TYPE_C 0x01
+#define CFG_DRIVER_TYPE_D 0x00
#define SD30_CMD_DRIVE_SEL 0xFD5E
#define SD30_DAT_DRIVE_SEL 0xFD5F
#define CARD_CLK_EN 0xFD69
+#define SD_CLK_EN 0x04
+#define MS_CLK_EN 0x08
#define SDIO_CTRL 0xFD6B
#define CD_PAD_CTL 0xFD73
-
+#define CD_DISABLE_MASK 0x07
+#define MS_CD_DISABLE 0x04
+#define SD_CD_DISABLE 0x02
+#define XD_CD_DISABLE 0x01
+#define CD_DISABLE 0x07
+#define CD_ENABLE 0x00
+#define MS_CD_EN_ONLY 0x03
+#define SD_CD_EN_ONLY 0x05
+#define XD_CD_EN_ONLY 0x06
+#define FORCE_CD_LOW_MASK 0x38
+#define FORCE_CD_XD_LOW 0x08
+#define FORCE_CD_SD_LOW 0x10
+#define FORCE_CD_MS_LOW 0x20
+#define CD_AUTO_DISABLE 0x40
#define FPDCTL 0xFC00
+#define SSC_POWER_DOWN 0x01
+#define SD_OC_POWER_DOWN 0x02
+#define ALL_POWER_DOWN 0x07
+#define OC_POWER_DOWN 0x06
#define PDINFO 0xFC01
#define CLK_CTL 0xFC02
+#define CHANGE_CLK 0x01
+#define CLK_LOW_FREQ 0x01
+
#define CLK_DIV 0xFC03
+#define CLK_DIV_1 0x01
+#define CLK_DIV_2 0x02
+#define CLK_DIV_4 0x03
+#define CLK_DIV_8 0x04
#define CLK_SEL 0xFC04
#define SSC_DIV_N_0 0xFC0F
#define SSC_DIV_N_1 0xFC10
#define SSC_CTL1 0xFC11
+#define SSC_RSTB 0x80
+#define SSC_8X_EN 0x40
+#define SSC_FIX_FRAC 0x20
+#define SSC_SEL_1M 0x00
+#define SSC_SEL_2M 0x08
+#define SSC_SEL_4M 0x10
+#define SSC_SEL_8M 0x18
#define SSC_CTL2 0xFC12
-
+#define SSC_DEPTH_MASK 0x07
+#define SSC_DEPTH_DISALBE 0x00
+#define SSC_DEPTH_4M 0x01
+#define SSC_DEPTH_2M 0x02
+#define SSC_DEPTH_1M 0x03
+#define SSC_DEPTH_500K 0x04
+#define SSC_DEPTH_250K 0x05
#define RCCTL 0xFC14
#define FPGA_PULL_CTL 0xFC1D
@@ -630,6 +492,24 @@
#define GPIO_CTL 0xFC1F
#define LDO_CTL 0xFC1E
+#define BPP_ASIC_1V7 0x00
+#define BPP_ASIC_1V8 0x01
+#define BPP_ASIC_1V9 0x02
+#define BPP_ASIC_2V0 0x03
+#define BPP_ASIC_2V7 0x04
+#define BPP_ASIC_2V8 0x05
+#define BPP_ASIC_3V2 0x06
+#define BPP_ASIC_3V3 0x07
+#define BPP_REG_TUNED18 0x07
+#define BPP_TUNED18_SHIFT_8402 5
+#define BPP_TUNED18_SHIFT_8411 4
+#define BPP_PAD_MASK 0x04
+#define BPP_PAD_3V3 0x04
+#define BPP_PAD_1V8 0x00
+#define BPP_LDO_POWB 0x03
+#define BPP_LDO_ON 0x00
+#define BPP_LDO_SUSPEND 0x02
+#define BPP_LDO_OFF 0x03
#define SYS_VER 0xFC32
#define CARD_PULL_CTL1 0xFD60
@@ -642,6 +522,10 @@
/* PCI Express Related Registers */
#define IRQEN0 0xFE20
#define IRQSTAT0 0xFE21
+#define DMA_DONE_INT 0x80
+#define SUSPEND_INT 0x40
+#define LINK_RDY_INT 0x20
+#define LINK_DOWN_INT 0x10
#define IRQEN1 0xFE22
#define IRQSTAT1 0xFE23
#define TLPRIEN 0xFE24
@@ -653,6 +537,16 @@
#define DMATC2 0xFE2A
#define DMATC3 0xFE2B
#define DMACTL 0xFE2C
+#define DMA_RST 0x80
+#define DMA_BUSY 0x04
+#define DMA_DIR_TO_CARD 0x00
+#define DMA_DIR_FROM_CARD 0x02
+#define DMA_EN 0x01
+#define DMA_128 (0 << 4)
+#define DMA_256 (1 << 4)
+#define DMA_512 (2 << 4)
+#define DMA_1024 (3 << 4)
+#define DMA_PACK_SIZE_MASK 0x30
#define BCTL 0xFE2D
#define RBBC0 0xFE2E
#define RBBC1 0xFE2F
@@ -693,11 +587,19 @@
#define RESET_LOAD_REG 0xFE5E
#define EFUSE_CONTENT 0xFE5F
#define HOST_SLEEP_STATE 0xFE60
+#define HOST_ENTER_S1 1
+#define HOST_ENTER_S3 2
+
#define SDIO_CFG 0xFE70
#define NFTS_TX_CTRL 0xFE72
#define PWR_GATE_CTRL 0xFE75
+#define PWR_GATE_EN 0x01
+#define LDO3318_PWR_MASK 0x06
+#define LDO_ON 0x00
+#define LDO_SUSPEND 0x04
+#define LDO_OFF 0x06
#define PWD_SUSPEND_EN 0xFE76
#define LDO_PWR_SEL 0xFE78
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 3/9] mfd: rtsx: update PETXCFG address
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 1/9] mfd: rtsx: replace TAB by SPC after #define micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 2/9] mfd: rtsx: place register address and values togather micky_ching
@ 2015-01-22 7:30 ` micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 4/9] mfd: rtsx: update driving settings micky_ching
` (5 subsequent siblings)
8 siblings, 0 replies; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
PETXCFG is defined at 0xFF03, the old 0xFE49 not used any more.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/rts5227.c | 6 ++----
drivers/mfd/rts5249.c | 6 ++----
include/linux/mfd/rtsx_pci.h | 2 +-
3 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index 3240740..1f387d4 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -118,11 +118,9 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
rts5227_fill_driving(pcr, OUTPUT_3V3);
/* Configure force_clock_req */
if (pcr->flags & PCR_REVERSE_SOCKET)
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
- AUTOLOAD_CFG_BASE + 3, 0xB8, 0xB8);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0xB8);
else
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
- AUTOLOAD_CFG_BASE + 3, 0xB8, 0x88);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0x88);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PM_CTRL3, 0x10, 0x00);
return rtsx_pci_send_cmd(pcr, 100);
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index cf425cc..225ad55 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -116,11 +116,9 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
/* Configure driving */
rts5249_fill_driving(pcr, OUTPUT_3V3);
if (pcr->flags & PCR_REVERSE_SOCKET)
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
- AUTOLOAD_CFG_BASE + 3, 0xB0, 0xB0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB0, 0xB0);
else
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
- AUTOLOAD_CFG_BASE + 3, 0xB0, 0x80);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB0, 0x80);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PM_CTRL3, 0x10, 0x00);
return rtsx_pci_send_cmd(pcr, 100);
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index e81f2bb..87cff60 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -572,7 +572,6 @@
#define MSGTXDATA2 0xFE46
#define MSGTXDATA3 0xFE47
#define MSGTXCTL 0xFE48
-#define PETXCFG 0xFE49
#define LTR_CTL 0xFE4A
#define OBFF_CFG 0xFE4C
@@ -606,6 +605,7 @@
#define DUMMY_REG_RESET_0 0xFE90
#define AUTOLOAD_CFG_BASE 0xFF00
+#define PETXCFG 0xFF03
#define PM_CTRL1 0xFF44
#define PM_CTRL2 0xFF45
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 4/9] mfd: rtsx: update driving settings
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
` (2 preceding siblings ...)
2015-01-22 7:30 ` [RESEND PATCH v2 3/9] mfd: rtsx: update PETXCFG address micky_ching
@ 2015-01-22 7:30 ` micky_ching
2015-01-22 7:40 ` Joe Perches
2015-01-22 7:30 ` [RESEND PATCH v2 5/9] mfd: rtsx: update phy register micky_ching
` (4 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
update card drive settings, This setting can be used for rts5249
rts524A and rts525A.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/rts5249.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 225ad55..2fe2854 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -36,16 +36,16 @@ static u8 rts5249_get_ic_version(struct rtsx_pcr *pcr)
static void rts5249_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
{
u8 driving_3v3[4][3] = {
- {0x11, 0x11, 0x11},
+ {0x11, 0x11, 0x18},
{0x55, 0x55, 0x5C},
- {0x99, 0x99, 0x92},
- {0x99, 0x99, 0x92},
+ {0xFF, 0xFF, 0xFF},
+ {0x96, 0x96, 0x96},
};
u8 driving_1v8[4][3] = {
+ {0xC4, 0xC4, 0xC4},
{0x3C, 0x3C, 0x3C},
- {0xB3, 0xB3, 0xB3},
{0xFE, 0xFE, 0xFE},
- {0xC4, 0xC4, 0xC4},
+ {0xB3, 0xB3, 0xB3},
};
u8 (*driving)[3], drive_sel;
@@ -341,7 +341,7 @@ void rts5249_init_params(struct rtsx_pcr *pcr)
pcr->flags = 0;
pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
- pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_C;
+ pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
pcr->aspm_en = ASPM_L1_EN;
pcr->tx_initial_phase = SET_CLOCK_PHASE(1, 29, 16);
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 5/9] mfd: rtsx: update phy register
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
` (3 preceding siblings ...)
2015-01-22 7:30 ` [RESEND PATCH v2 4/9] mfd: rtsx: update driving settings micky_ching
@ 2015-01-22 7:30 ` micky_ching
2015-02-16 14:07 ` Lee Jones
2015-01-22 7:30 ` [RESEND PATCH v2 6/9] mfd: rtsx: remove LCTLR defination micky_ching
` (3 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
update phy register value and using direct value instead of macros.
It is much easier to debug using constant value than a lot of macros.
We usually need compare the value directly to check the configure.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
---
drivers/mfd/rts5249.c | 55 ++++++++++++----------
include/linux/mfd/rtsx_pci.h | 109 ++++++++++++++++++++++---------------------
2 files changed, 85 insertions(+), 79 deletions(-)
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 2fe2854..d8072f6 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -132,57 +132,62 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
if (err < 0)
return err;
- err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
- PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
- PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
- PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 |
- PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR);
+ err = rtsx_pci_write_phy_register(pcr, PHY_REV,
+ PHY_REV_RESV | PHY_REV_RXIDLE_LATCHED |
+ PHY_REV_P1_EN | PHY_REV_RXIDLE_EN |
+ PHY_REV_CLKREQ_TX_EN | PHY_REV_RX_PWST |
+ PHY_REV_CLKREQ_DT_1_0 | PHY_REV_STOP_CLKRD |
+ PHY_REV_STOP_CLKWR);
if (err < 0)
return err;
msleep(1);
err = rtsx_pci_write_phy_register(pcr, PHY_BPCR,
- PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
- PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
+ PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
+ PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
if (err < 0)
return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_PCR,
- PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
- PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
- PHY_PCR_RSSI_EN);
+ PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
+ PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
+ PHY_PCR_RSSI_EN | PHY_PCR_RX10K);
if (err < 0)
return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
- PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR |
- PHY_RCR2_CDR_CP_10 | PHY_RCR2_CDR_SR_2 |
- PHY_RCR2_FREQSEL_12 | PHY_RCR2_CPADJEN |
- PHY_RCR2_CDR_SC_8 | PHY_RCR2_CALIB_LATE);
+ PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR |
+ PHY_RCR2_CDR_SR_2 | PHY_RCR2_FREQSEL_12 |
+ PHY_RCR2_CDR_SC_12P | PHY_RCR2_CALIB_LATE);
if (err < 0)
return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_FLD4,
- PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF |
- PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA |
- PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER |
- PHY_FLD4_BER_CHK_EN);
+ PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF |
+ PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA |
+ PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER |
+ PHY_FLD4_BER_CHK_EN);
if (err < 0)
return err;
- err = rtsx_pci_write_phy_register(pcr, PHY_RDR, PHY_RDR_RXDSEL_1_9);
+ err = rtsx_pci_write_phy_register(pcr, PHY_RDR,
+ PHY_RDR_RXDSEL_1_9 | PHY_SSC_AUTO_PWD);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_RCR1,
- PHY_RCR1_ADP_TIME | PHY_RCR1_VCO_COARSE);
+ PHY_RCR1_ADP_TIME_4 | PHY_RCR1_VCO_COARSE);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_FLD3,
- PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 |
- PHY_FLD3_RXDELINK);
+ PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 |
+ PHY_FLD3_RXDELINK);
if (err < 0)
return err;
+
return rtsx_pci_write_phy_register(pcr, PHY_TUNE,
- PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 |
- PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 |
- PHY_TUNE_TUNED12);
+ PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 |
+ PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 |
+ PHY_TUNE_TUNED12 | PHY_TUNE_TUNEA12);
}
static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 87cff60..0103210 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -630,16 +630,47 @@
/* Phy register */
#define PHY_PCR 0x00
+#define PHY_PCR_FORCE_CODE 0xB000
+#define PHY_PCR_OOBS_CALI_50 0x0800
+#define PHY_PCR_OOBS_VCM_08 0x0200
+#define PHY_PCR_OOBS_SEN_90 0x0040
+#define PHY_PCR_RSSI_EN 0x0002
+#define PHY_PCR_RX10K 0x0001
+
#define PHY_RCR0 0x01
#define PHY_RCR1 0x02
+#define PHY_RCR1_ADP_TIME_4 0x0400
+#define PHY_RCR1_VCO_COARSE 0x001F
+
#define PHY_RCR2 0x03
+#define PHY_RCR2_EMPHASE_EN 0x8000
+#define PHY_RCR2_NADJR 0x4000
+#define PHY_RCR2_CDR_SR_2 0x0100
+#define PHY_RCR2_FREQSEL_12 0x0040
+#define PHY_RCR2_CDR_SC_12P 0x0010
+#define PHY_RCR2_CALIB_LATE 0x0002
+
#define PHY_RTCR 0x04
#define PHY_RDR 0x05
+#define PHY_RDR_RXDSEL_1_9 0x4000
+#define PHY_SSC_AUTO_PWD 0x0600
#define PHY_TCR0 0x06
#define PHY_TCR1 0x07
#define PHY_TUNE 0x08
+#define PHY_TUNE_TUNEREF_1_0 0x4000
+#define PHY_TUNE_VBGSEL_1252 0x0C00
+#define PHY_TUNE_SDBUS_33 0x0200
+#define PHY_TUNE_TUNED18 0x01C0
+#define PHY_TUNE_TUNED12 0X0020
+#define PHY_TUNE_TUNEA12 0x0004
+
#define PHY_IMR 0x09
#define PHY_BPCR 0x0A
+#define PHY_BPCR_IBRXSEL 0x0400
+#define PHY_BPCR_IBTXSEL 0x0100
+#define PHY_BPCR_IB_FILTER 0x0080
+#define PHY_BPCR_CMIRROR_EN 0x0040
+
#define PHY_BIST 0x0B
#define PHY_RAW_L 0x0C
#define PHY_RAW_H 0x0D
@@ -654,12 +685,35 @@
#define PHY_BPNR 0x16
#define PHY_BRNR2 0x17
#define PHY_BENR 0x18
-#define PHY_REG_REV 0x19
+#define PHY_REV 0x19
+#define PHY_REV_RESV 0xE000
+#define PHY_REV_RXIDLE_LATCHED 0x1000
+#define PHY_REV_P1_EN 0x0800
+#define PHY_REV_RXIDLE_EN 0x0400
+#define PHY_REV_CLKREQ_TX_EN 0x0200
+#define PHY_REV_CLKREQ_RX_EN 0x0100
+#define PHY_REV_CLKREQ_DT_1_0 0x0040
+#define PHY_REV_STOP_CLKRD 0x0020
+#define PHY_REV_RX_PWST 0x0008
+#define PHY_REV_STOP_CLKWR 0x0004
+
#define PHY_FLD0 0x1A
#define PHY_FLD1 0x1B
#define PHY_FLD2 0x1C
#define PHY_FLD3 0x1D
+#define PHY_FLD3_TIMER_4 0x0800
+#define PHY_FLD3_TIMER_6 0x0020
+#define PHY_FLD3_RXDELINK 0x0004
+
#define PHY_FLD4 0x1E
+#define PHY_FLD4_FLDEN_SEL 0x4000
+#define PHY_FLD4_REQ_REF 0x2000
+#define PHY_FLD4_RXAMP_OFF 0x1000
+#define PHY_FLD4_REQ_ADDA 0x0800
+#define PHY_FLD4_BER_COUNT 0x00E0
+#define PHY_FLD4_BER_TIMER 0x000A
+#define PHY_FLD4_BER_CHK_EN 0x0001
+
#define PHY_DUM_REG 0x1F
#define LCTLR 0x80
@@ -675,59 +729,6 @@
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
-/* Phy bits */
-#define PHY_PCR_FORCE_CODE 0xB000
-#define PHY_PCR_OOBS_CALI_50 0x0800
-#define PHY_PCR_OOBS_VCM_08 0x0200
-#define PHY_PCR_OOBS_SEN_90 0x0040
-#define PHY_PCR_RSSI_EN 0x0002
-
-#define PHY_RCR1_ADP_TIME 0x0100
-#define PHY_RCR1_VCO_COARSE 0x001F
-
-#define PHY_RCR2_EMPHASE_EN 0x8000
-#define PHY_RCR2_NADJR 0x4000
-#define PHY_RCR2_CDR_CP_10 0x0400
-#define PHY_RCR2_CDR_SR_2 0x0100
-#define PHY_RCR2_FREQSEL_12 0x0040
-#define PHY_RCR2_CPADJEN 0x0020
-#define PHY_RCR2_CDR_SC_8 0x0008
-#define PHY_RCR2_CALIB_LATE 0x0002
-
-#define PHY_RDR_RXDSEL_1_9 0x4000
-
-#define PHY_TUNE_TUNEREF_1_0 0x4000
-#define PHY_TUNE_VBGSEL_1252 0x0C00
-#define PHY_TUNE_SDBUS_33 0x0200
-#define PHY_TUNE_TUNED18 0x01C0
-#define PHY_TUNE_TUNED12 0X0020
-
-#define PHY_BPCR_IBRXSEL 0x0400
-#define PHY_BPCR_IBTXSEL 0x0100
-#define PHY_BPCR_IB_FILTER 0x0080
-#define PHY_BPCR_CMIRROR_EN 0x0040
-
-#define PHY_REG_REV_RESV 0xE000
-#define PHY_REG_REV_RXIDLE_LATCHED 0x1000
-#define PHY_REG_REV_P1_EN 0x0800
-#define PHY_REG_REV_RXIDLE_EN 0x0400
-#define PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 0x0040
-#define PHY_REG_REV_STOP_CLKRD 0x0020
-#define PHY_REG_REV_RX_PWST 0x0008
-#define PHY_REG_REV_STOP_CLKWR 0x0004
-
-#define PHY_FLD3_TIMER_4 0x7800
-#define PHY_FLD3_TIMER_6 0x00E0
-#define PHY_FLD3_RXDELINK 0x0004
-
-#define PHY_FLD4_FLDEN_SEL 0x4000
-#define PHY_FLD4_REQ_REF 0x2000
-#define PHY_FLD4_RXAMP_OFF 0x1000
-#define PHY_FLD4_REQ_ADDA 0x0800
-#define PHY_FLD4_BER_COUNT 0x00E0
-#define PHY_FLD4_BER_TIMER 0x000A
-#define PHY_FLD4_BER_CHK_EN 0x0001
-
#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0)
struct rtsx_pcr;
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 6/9] mfd: rtsx: remove LCTLR defination
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
` (4 preceding siblings ...)
2015-01-22 7:30 ` [RESEND PATCH v2 5/9] mfd: rtsx: update phy register micky_ching
@ 2015-01-22 7:30 ` micky_ching
2015-02-16 14:31 ` Lee Jones
2015-01-22 7:30 ` [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A micky_ching
` (2 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
To enable/disable ASPM we should find LINK CONTROL register
in PCI config space. All old chip use 0x80 address, but new
chip may use another address, so we using pci_find_capability()
to get LINK CONTROL address.
rtsx_gops.c was removed, we consider to put some common operations
to this file, but the actual thing is, only a group of chips
are in common ops1, and another group of chips in common ops2,
it is hard to decide put which ops into generic ops file.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
---
drivers/mfd/Makefile | 2 +-
drivers/mfd/rts5227.c | 2 +-
drivers/mfd/rts5249.c | 3 +--
drivers/mfd/rtsx_gops.c | 37 -------------------------------------
drivers/mfd/rtsx_pcr.c | 22 +++++++++++++++++-----
include/linux/mfd/rtsx_pci.h | 10 +---------
6 files changed, 21 insertions(+), 55 deletions(-)
delete mode 100644 drivers/mfd/rtsx_gops.c
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 53467e2..2cd7e74 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o
obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
-rtsx_pci-objs := rtsx_pcr.o rtsx_gops.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
+rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index 1f387d4..0c02831 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -130,7 +130,7 @@ static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
{
int err;
- err = rtsx_gops_pm_reset(pcr);
+ err = rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00);
if (err < 0)
return err;
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index d8072f6..3977946 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -119,7 +119,6 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB0, 0xB0);
else
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB0, 0x80);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PM_CTRL3, 0x10, 0x00);
return rtsx_pci_send_cmd(pcr, 100);
}
@@ -128,7 +127,7 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
{
int err;
- err = rtsx_gops_pm_reset(pcr);
+ err = rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00);
if (err < 0)
return err;
diff --git a/drivers/mfd/rtsx_gops.c b/drivers/mfd/rtsx_gops.c
deleted file mode 100644
index b1a98c6..0000000
--- a/drivers/mfd/rtsx_gops.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Driver for Realtek PCI-Express card reader
- *
- * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- * Micky Ching <micky_ching@realsil.com.cn>
- */
-
-#include <linux/mfd/rtsx_pci.h>
-#include "rtsx_pcr.h"
-
-int rtsx_gops_pm_reset(struct rtsx_pcr *pcr)
-{
- int err;
-
- /* init aspm */
- rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0x00);
- err = rtsx_pci_update_cfg_byte(pcr, LCTLR, ~LCTLR_ASPM_CTL_MASK, 0x00);
- if (err < 0)
- return err;
-
- /* reset PM_CTRL3 before send buffer cmd */
- return rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00);
-}
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 30f7ca8..81b9c2c 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -63,6 +63,18 @@ static const struct pci_device_id rtsx_pci_ids[] = {
MODULE_DEVICE_TABLE(pci, rtsx_pci_ids);
+static inline void rtsx_pci_enable_aspm(struct rtsx_pcr *pcr)
+{
+ rtsx_pci_update_cfg_byte(pcr, pcr->pcie_cap + PCI_EXP_LNKCTL,
+ 0xFC, pcr->aspm_en);
+}
+
+static inline void rtsx_pci_disable_aspm(struct rtsx_pcr *pcr)
+{
+ rtsx_pci_update_cfg_byte(pcr, pcr->pcie_cap + PCI_EXP_LNKCTL,
+ 0xFC, 0);
+}
+
void rtsx_pci_start_run(struct rtsx_pcr *pcr)
{
/* If pci device removed, don't queue idle work any more */
@@ -75,7 +87,7 @@ void rtsx_pci_start_run(struct rtsx_pcr *pcr)
pcr->ops->enable_auto_blink(pcr);
if (pcr->aspm_en)
- rtsx_pci_write_config_byte(pcr, LCTLR, 0);
+ rtsx_pci_disable_aspm(pcr);
}
mod_delayed_work(system_wq, &pcr->idle_work, msecs_to_jiffies(200));
@@ -942,7 +954,7 @@ static void rtsx_pci_idle_work(struct work_struct *work)
pcr->ops->turn_off_led(pcr);
if (pcr->aspm_en)
- rtsx_pci_write_config_byte(pcr, LCTLR, pcr->aspm_en);
+ rtsx_pci_enable_aspm(pcr);
mutex_unlock(&pcr->pcr_mutex);
}
@@ -968,6 +980,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
{
int err;
+ pcr->pcie_cap = pci_find_capability(pcr->pci, PCI_CAP_ID_EXP);
rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
rtsx_pci_enable_bus_int(pcr);
@@ -980,6 +993,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
/* Wait SSC power stable */
udelay(200);
+ rtsx_pci_disable_aspm(pcr);
if (pcr->ops->optimize_phy) {
err = pcr->ops->optimize_phy(pcr);
if (err < 0)
@@ -1028,10 +1042,8 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
if (err < 0)
return err;
- rtsx_pci_write_config_byte(pcr, LCTLR, 0);
-
/* Enable clk_request_n to enable clock power management */
- rtsx_pci_write_config_byte(pcr, 0x81, 1);
+ rtsx_pci_write_config_byte(pcr, pcr->pcie_cap + PCI_EXP_LNKCTL + 1, 1);
/* Enter L1 when host tx idle */
rtsx_pci_write_config_byte(pcr, 0x70F, 0x5B);
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 0103210..33cc63c 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -716,15 +716,6 @@
#define PHY_DUM_REG 0x1F
-#define LCTLR 0x80
-#define LCTLR_EXT_SYNC 0x80
-#define LCTLR_COMMON_CLOCK_CFG 0x40
-#define LCTLR_RETRAIN_LINK 0x20
-#define LCTLR_LINK_DISABLE 0x10
-#define LCTLR_RCB 0x08
-#define LCTLR_RESERVED 0x04
-#define LCTLR_ASPM_CTL_MASK 0x03
-
#define PCR_SETTING_REG1 0x724
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
@@ -759,6 +750,7 @@ enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN};
struct rtsx_pcr {
struct pci_dev *pci;
unsigned int id;
+ int pcie_cap;
/* pci resources */
unsigned long addr;
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
` (5 preceding siblings ...)
2015-01-22 7:30 ` [RESEND PATCH v2 6/9] mfd: rtsx: remove LCTLR defination micky_ching
@ 2015-01-22 7:30 ` micky_ching
2015-02-02 1:07 ` 敬锐
2015-02-16 14:28 ` Lee Jones
2015-01-22 7:30 ` [RESEND PATCH v2 8/9] mfd: rtsx: add support for rts525A micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 9/9] mfd: rtsx: using pcr_dbg replace dev_dbg micky_ching
8 siblings, 2 replies; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
add support for new chip rts524A.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
---
drivers/mfd/rts5249.c | 186 ++++++++++++++++++++++++++++++++++++-------
drivers/mfd/rtsx_pcr.c | 25 +++++-
drivers/mfd/rtsx_pcr.h | 7 ++
include/linux/mfd/rtsx_pci.h | 125 ++++++++++++++++++++++++++++-
4 files changed, 310 insertions(+), 33 deletions(-)
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 3977946..97dde92 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -65,15 +65,17 @@ static void rts5249_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
0xFF, driving[drive_sel][2]);
}
-static void rts5249_fetch_vendor_settings(struct rtsx_pcr *pcr)
+static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
u32 reg;
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
- if (!rtsx_vendor_setting_valid(reg))
+ if (!rtsx_vendor_setting_valid(reg)) {
+ pcr_dbg(pcr, "skip fetch vendor setting\n");
return;
+ }
pcr->aspm_en = rtsx_reg_to_aspm(reg);
pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
@@ -87,15 +89,21 @@ static void rts5249_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->flags |= PCR_REVERSE_SOCKET;
}
-static void rts5249_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
+static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
{
/* Set relink_time to 0 */
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, 0xFF, 0);
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, 0xFF, 0);
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
- if (pm_state == HOST_ENTER_S3)
- rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);
+ if (pm_state == HOST_ENTER_S3) {
+ if (PCI_PID(pcr) == 0x524A)
+ rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
+ D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
+ else if (PCI_PID(pcr) == 0x5249)
+ rtsx_pci_write_register(pcr, PM_CTRL3,
+ D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
+ }
rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
}
@@ -104,6 +112,8 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
{
rtsx_pci_init_cmd(pcr);
+ /* Rest L1SUB Config */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, L1SUB_CONFIG3, 0xFF, 0x00);
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
/* Reset ASPM state to default value */
@@ -189,27 +199,27 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
PHY_TUNE_TUNED12 | PHY_TUNE_TUNEA12);
}
-static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
+static int rtsx_base_turn_on_led(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
}
-static int rts5249_turn_off_led(struct rtsx_pcr *pcr)
+static int rtsx_base_turn_off_led(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
}
-static int rts5249_enable_auto_blink(struct rtsx_pcr *pcr)
+static int rtsx_base_enable_auto_blink(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
}
-static int rts5249_disable_auto_blink(struct rtsx_pcr *pcr)
+static int rtsx_base_disable_auto_blink(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
}
-static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
+static int rtsx_base_card_power_on(struct rtsx_pcr *pcr, int card)
{
int err;
@@ -236,7 +246,7 @@ static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
return 0;
}
-static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
+static int rtsx_base_card_power_off(struct rtsx_pcr *pcr, int card)
{
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
@@ -246,22 +256,31 @@ static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
return rtsx_pci_send_cmd(pcr, 100);
}
-static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+static int rtsx_base_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
{
int err;
+ u16 append;
- if (voltage == OUTPUT_3V3) {
- err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4FC0 | 0x24);
- if (err < 0)
- return err;
- } else if (voltage == OUTPUT_1V8) {
- err = rtsx_pci_write_phy_register(pcr, PHY_BACR, 0x3C02);
+ switch (voltage) {
+ case OUTPUT_3V3:
+ err = rtsx_pci_update_phy(pcr, PHY_TUNE, 0xFC3F, 0x03C0);
if (err < 0)
return err;
- err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4C40 | 0x24);
+ break;
+ case OUTPUT_1V8:
+ append = 0x0100;
+ if (PCI_PID(pcr) == 0x5249) {
+ err = rtsx_pci_update_phy(pcr, PHY_BACR, 0xFFF3, 0);
+ if (err < 0)
+ return err;
+ append = 0x0080;
+ }
+
+ err = rtsx_pci_update_phy(pcr, PHY_TUNE, 0xFC3F, append);
if (err < 0)
return err;
- } else {
+ break;
+ default:
return -EINVAL;
}
@@ -272,17 +291,17 @@ static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
}
static const struct pcr_ops rts5249_pcr_ops = {
- .fetch_vendor_settings = rts5249_fetch_vendor_settings,
+ .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
.extra_init_hw = rts5249_extra_init_hw,
.optimize_phy = rts5249_optimize_phy,
- .turn_on_led = rts5249_turn_on_led,
- .turn_off_led = rts5249_turn_off_led,
- .enable_auto_blink = rts5249_enable_auto_blink,
- .disable_auto_blink = rts5249_disable_auto_blink,
- .card_power_on = rts5249_card_power_on,
- .card_power_off = rts5249_card_power_off,
- .switch_output_voltage = rts5249_switch_output_voltage,
- .force_power_down = rts5249_force_power_down,
+ .turn_on_led = rtsx_base_turn_on_led,
+ .turn_off_led = rtsx_base_turn_off_led,
+ .enable_auto_blink = rtsx_base_enable_auto_blink,
+ .disable_auto_blink = rtsx_base_disable_auto_blink,
+ .card_power_on = rtsx_base_card_power_on,
+ .card_power_off = rtsx_base_card_power_off,
+ .switch_output_voltage = rtsx_base_switch_output_voltage,
+ .force_power_down = rtsx_base_force_power_down,
};
/* SD Pull Control Enable:
@@ -357,3 +376,112 @@ void rts5249_init_params(struct rtsx_pcr *pcr)
pcr->ms_pull_ctl_enable_tbl = rts5249_ms_pull_ctl_enable_tbl;
pcr->ms_pull_ctl_disable_tbl = rts5249_ms_pull_ctl_disable_tbl;
}
+
+static int rts524a_write_phy(struct rtsx_pcr *pcr, u8 addr, u16 val)
+{
+ addr = addr & 0x80 ? (addr & 0x7F) | 0x40 : addr;
+
+ return __rtsx_pci_write_phy_register(pcr, addr, val);
+}
+
+static int rts524a_read_phy(struct rtsx_pcr *pcr, u8 addr, u16 *val)
+{
+ addr = addr & 0x80 ? (addr & 0x7F) | 0x40 : addr;
+
+ return __rtsx_pci_read_phy_register(pcr, addr, val);
+}
+
+static int rts524a_optimize_phy(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
+ D3_DELINK_MODE_EN, 0x00);
+ if (err < 0)
+ return err;
+
+ rtsx_pci_write_phy_register(pcr, PHY_PCR,
+ PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
+ PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 | PHY_PCR_RSSI_EN);
+ rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
+ PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
+
+ if (is_version(pcr, 0x524A, IC_VER_A)) {
+ rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
+ PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
+ rtsx_pci_write_phy_register(pcr, PHY_SSCCR2,
+ PHY_SSCCR2_PLL_NCODE | PHY_SSCCR2_TIME0 |
+ PHY_SSCCR2_TIME2_WIDTH);
+ rtsx_pci_write_phy_register(pcr, PHY_ANA1A,
+ PHY_ANA1A_TXR_LOOPBACK | PHY_ANA1A_RXT_BIST |
+ PHY_ANA1A_TXR_BIST | PHY_ANA1A_REV);
+ rtsx_pci_write_phy_register(pcr, PHY_ANA1D,
+ PHY_ANA1D_DEBUG_ADDR);
+ rtsx_pci_write_phy_register(pcr, PHY_DIG1E,
+ PHY_DIG1E_REV | PHY_DIG1E_D0_X_D1 |
+ PHY_DIG1E_RX_ON_HOST | PHY_DIG1E_RCLK_REF_HOST |
+ PHY_DIG1E_RCLK_TX_EN_KEEP |
+ PHY_DIG1E_RCLK_TX_TERM_KEEP |
+ PHY_DIG1E_RCLK_RX_EIDLE_ON | PHY_DIG1E_TX_TERM_KEEP |
+ PHY_DIG1E_RX_TERM_KEEP | PHY_DIG1E_TX_EN_KEEP |
+ PHY_DIG1E_RX_EN_KEEP);
+ }
+
+ rtsx_pci_write_phy_register(pcr, PHY_ANA08,
+ PHY_ANA08_RX_EQ_DCGAIN | PHY_ANA08_SEL_RX_EN |
+ PHY_ANA08_RX_EQ_VAL | PHY_ANA08_SCP | PHY_ANA08_SEL_IPI);
+
+ return 0;
+}
+
+static int rts524a_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ rts5249_extra_init_hw(pcr);
+
+ rtsx_pci_write_register(pcr, FUNC_FORCE_CTL,
+ FORCE_ASPM_L1_EN, FORCE_ASPM_L1_EN);
+ rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
+ rtsx_pci_write_register(pcr, LDO_VCC_CFG1, LDO_VCC_LMT_EN,
+ LDO_VCC_LMT_EN);
+ rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);
+ if (is_version(pcr, 0x524A, IC_VER_A)) {
+ rtsx_pci_write_register(pcr, LDO_DV18_CFG,
+ LDO_DV18_SR_MASK, LDO_DV18_SR_DF);
+ rtsx_pci_write_register(pcr, LDO_VCC_CFG1,
+ LDO_VCC_REF_TUNE_MASK, LDO_VCC_REF_1V2);
+ rtsx_pci_write_register(pcr, LDO_VIO_CFG,
+ LDO_VIO_REF_TUNE_MASK, LDO_VIO_REF_1V2);
+ rtsx_pci_write_register(pcr, LDO_VIO_CFG,
+ LDO_VIO_SR_MASK, LDO_VIO_SR_DF);
+ rtsx_pci_write_register(pcr, LDO_DV12S_CFG,
+ LDO_REF12_TUNE_MASK, LDO_REF12_TUNE_DF);
+ rtsx_pci_write_register(pcr, SD40_LDO_CTL1,
+ SD40_VIO_TUNE_MASK, SD40_VIO_TUNE_1V7);
+ }
+
+ return 0;
+}
+
+static const struct pcr_ops rts524a_pcr_ops = {
+ .write_phy = rts524a_write_phy,
+ .read_phy = rts524a_read_phy,
+ .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
+ .extra_init_hw = rts524a_extra_init_hw,
+ .optimize_phy = rts524a_optimize_phy,
+ .turn_on_led = rtsx_base_turn_on_led,
+ .turn_off_led = rtsx_base_turn_off_led,
+ .enable_auto_blink = rtsx_base_enable_auto_blink,
+ .disable_auto_blink = rtsx_base_disable_auto_blink,
+ .card_power_on = rtsx_base_card_power_on,
+ .card_power_off = rtsx_base_card_power_off,
+ .switch_output_voltage = rtsx_base_switch_output_voltage,
+ .force_power_down = rtsx_base_force_power_down,
+};
+
+void rts524a_init_params(struct rtsx_pcr *pcr)
+{
+ rts5249_init_params(pcr);
+
+ pcr->ops = &rts524a_pcr_ops;
+}
+
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 81b9c2c..e6d97ad 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -58,6 +58,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
{ PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x524A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};
@@ -142,7 +143,7 @@ int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data)
}
EXPORT_SYMBOL_GPL(rtsx_pci_read_register);
-int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
+int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
{
int err, i, finished = 0;
u8 tmp;
@@ -174,9 +175,17 @@ int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
return 0;
}
+
+int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
+{
+ if (pcr->ops->write_phy)
+ return pcr->ops->write_phy(pcr, addr, val);
+
+ return __rtsx_pci_write_phy_register(pcr, addr, val);
+}
EXPORT_SYMBOL_GPL(rtsx_pci_write_phy_register);
-int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
+int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
{
int err, i, finished = 0;
u16 data;
@@ -222,6 +231,14 @@ int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
return 0;
}
+
+int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
+{
+ if (pcr->ops->read_phy)
+ return pcr->ops->read_phy(pcr, addr, val);
+
+ return __rtsx_pci_read_phy_register(pcr, addr, val);
+}
EXPORT_SYMBOL_GPL(rtsx_pci_read_phy_register);
void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
@@ -1093,6 +1110,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
rts5249_init_params(pcr);
break;
+ case 0x524A:
+ rts524a_init_params(pcr);
+ break;
+
case 0x5287:
rtl8411b_init_params(pcr);
break;
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index fe2bbb6..e7daf6f 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -27,12 +27,19 @@
#define MIN_DIV_N_PCR 80
#define MAX_DIV_N_PCR 208
+#define RTS524A_PME_FORCE_CTL 0xFF78
+#define RTS524A_PM_CTRL3 0xFF7E
+
+int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
+int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
+
void rts5209_init_params(struct rtsx_pcr *pcr);
void rts5229_init_params(struct rtsx_pcr *pcr);
void rtl8411_init_params(struct rtsx_pcr *pcr);
void rtl8402_init_params(struct rtsx_pcr *pcr);
void rts5227_init_params(struct rtsx_pcr *pcr);
void rts5249_init_params(struct rtsx_pcr *pcr);
+void rts524a_init_params(struct rtsx_pcr *pcr);
void rtl8411b_init_params(struct rtsx_pcr *pcr);
static inline u8 map_sd_drive(int idx)
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 33cc63c..a392546 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -577,8 +577,16 @@
#define CDRESUMECTL 0xFE52
#define WAKE_SEL_CTL 0xFE54
+#define PCLK_CTL 0xFE55
+#define PCLK_MODE_SEL 0x20
#define PME_FORCE_CTL 0xFE56
+
#define ASPM_FORCE_CTL 0xFE57
+#define FORCE_ASPM_CTL0 0x10
+#define FORCE_ASPM_VAL_MASK 0x03
+#define FORCE_ASPM_L1_EN 0x02
+#define FORCE_ASPM_L0_EN 0x01
+#define FORCE_ASPM_NO_ASPM 0x00
#define PM_CLK_FORCE_CTL 0xFE58
#define FUNC_FORCE_CTL 0xFE59
#define PERST_GLITCH_WIDTH 0xFE5C
@@ -590,7 +598,8 @@
#define HOST_ENTER_S3 2
#define SDIO_CFG 0xFE70
-
+#define PM_EVENT_DEBUG 0xFE71
+#define PME_DEBUG_0 0x08
#define NFTS_TX_CTRL 0xFE72
#define PWR_GATE_CTRL 0xFE75
@@ -602,12 +611,19 @@
#define PWD_SUSPEND_EN 0xFE76
#define LDO_PWR_SEL 0xFE78
+#define L1SUB_CONFIG1 0xFE8D
+#define L1SUB_CONFIG2 0xFE8E
+#define L1SUB_AUTO_CFG 0x02
+#define L1SUB_CONFIG3 0xFE8F
+
#define DUMMY_REG_RESET_0 0xFE90
#define AUTOLOAD_CFG_BASE 0xFF00
#define PETXCFG 0xFF03
#define PM_CTRL1 0xFF44
+#define CD_RESUME_EN_MASK 0xF0
+
#define PM_CTRL2 0xFF45
#define PM_CTRL3 0xFF46
#define SDIO_SEND_PME_EN 0x80
@@ -628,6 +644,61 @@
#define IMAGE_FLAG_ADDR0 0xCE80
#define IMAGE_FLAG_ADDR1 0xCE81
+#define RREF_CFG 0xFF6C
+#define RREF_VBGSEL_MASK 0x38
+#define RREF_VBGSEL_1V25 0x28
+
+#define OOBS_CONFIG 0xFF6E
+#define OOBS_AUTOK_DIS 0x80
+#define OOBS_VAL_MASK 0x1F
+
+#define LDO_DV18_CFG 0xFF70
+#define LDO_DV18_SR_MASK 0xC0
+#define LDO_DV18_SR_DF 0x40
+
+#define LDO_CONFIG2 0xFF71
+#define LDO_D3318_MASK 0x07
+#define LDO_D3318_33V 0x07
+#define LDO_D3318_18V 0x02
+
+#define LDO_VCC_CFG0 0xFF72
+#define LDO_VCC_LMTVTH_MASK 0x30
+#define LDO_VCC_LMTVTH_2A 0x10
+
+#define LDO_VCC_CFG1 0xFF73
+#define LDO_VCC_REF_TUNE_MASK 0x30
+#define LDO_VCC_REF_1V2 0x20
+#define LDO_VCC_TUNE_MASK 0x07
+#define LDO_VCC_1V8 0x04
+#define LDO_VCC_3V3 0x07
+#define LDO_VCC_LMT_EN 0x08
+
+#define LDO_VIO_CFG 0xFF75
+#define LDO_VIO_SR_MASK 0xC0
+#define LDO_VIO_SR_DF 0x40
+#define LDO_VIO_REF_TUNE_MASK 0x30
+#define LDO_VIO_REF_1V2 0x20
+#define LDO_VIO_TUNE_MASK 0x07
+#define LDO_VIO_1V7 0x03
+#define LDO_VIO_1V8 0x04
+#define LDO_VIO_3V3 0x07
+
+#define LDO_DV12S_CFG 0xFF76
+#define LDO_REF12_TUNE_MASK 0x18
+#define LDO_REF12_TUNE_DF 0x10
+#define LDO_D12_TUNE_MASK 0x07
+#define LDO_D12_TUNE_DF 0x04
+
+#define LDO_AV12S_CFG 0xFF77
+#define LDO_AV12S_TUNE_MASK 0x07
+#define LDO_AV12S_TUNE_DF 0x04
+
+#define SD40_LDO_CTL1 0xFE7D
+#define SD40_VIO_TUNE_MASK 0x70
+#define SD40_VIO_TUNE_1V7 0x30
+#define SD_VIO_LDO_1V8 0x40
+#define SD_VIO_LDO_3V3 0x70
+
/* Phy register */
#define PHY_PCR 0x00
#define PHY_PCR_FORCE_CODE 0xB000
@@ -641,6 +712,10 @@
#define PHY_RCR1 0x02
#define PHY_RCR1_ADP_TIME_4 0x0400
#define PHY_RCR1_VCO_COARSE 0x001F
+#define PHY_SSCCR2 0x02
+#define PHY_SSCCR2_PLL_NCODE 0x0A00
+#define PHY_SSCCR2_TIME0 0x001C
+#define PHY_SSCCR2_TIME2_WIDTH 0x0003
#define PHY_RCR2 0x03
#define PHY_RCR2_EMPHASE_EN 0x8000
@@ -649,6 +724,9 @@
#define PHY_RCR2_FREQSEL_12 0x0040
#define PHY_RCR2_CDR_SC_12P 0x0010
#define PHY_RCR2_CALIB_LATE 0x0002
+#define PHY_SSCCR3 0x03
+#define PHY_SSCCR3_STEP_IN 0x2740
+#define PHY_SSCCR3_CHECK_DELAY 0x0008
#define PHY_RTCR 0x04
#define PHY_RDR 0x05
@@ -663,6 +741,12 @@
#define PHY_TUNE_TUNED18 0x01C0
#define PHY_TUNE_TUNED12 0X0020
#define PHY_TUNE_TUNEA12 0x0004
+#define PHY_ANA08 0x08
+#define PHY_ANA08_RX_EQ_DCGAIN 0x5000
+#define PHY_ANA08_SEL_RX_EN 0x0400
+#define PHY_ANA08_RX_EQ_VAL 0x03C0
+#define PHY_ANA08_SCP 0x0020
+#define PHY_ANA08_SEL_IPI 0x0004
#define PHY_IMR 0x09
#define PHY_BPCR 0x0A
@@ -698,12 +782,19 @@
#define PHY_REV_STOP_CLKWR 0x0004
#define PHY_FLD0 0x1A
+#define PHY_ANA1A 0x1A
+#define PHY_ANA1A_TXR_LOOPBACK 0x2000
+#define PHY_ANA1A_RXT_BIST 0x0500
+#define PHY_ANA1A_TXR_BIST 0x0040
+#define PHY_ANA1A_REV 0x0006
#define PHY_FLD1 0x1B
#define PHY_FLD2 0x1C
#define PHY_FLD3 0x1D
#define PHY_FLD3_TIMER_4 0x0800
#define PHY_FLD3_TIMER_6 0x0020
#define PHY_FLD3_RXDELINK 0x0004
+#define PHY_ANA1D 0x1D
+#define PHY_ANA1D_DEBUG_ADDR 0x0004
#define PHY_FLD4 0x1E
#define PHY_FLD4_FLDEN_SEL 0x4000
@@ -713,7 +804,18 @@
#define PHY_FLD4_BER_COUNT 0x00E0
#define PHY_FLD4_BER_TIMER 0x000A
#define PHY_FLD4_BER_CHK_EN 0x0001
-
+#define PHY_DIG1E 0x1E
+#define PHY_DIG1E_REV 0x4000
+#define PHY_DIG1E_D0_X_D1 0x1000
+#define PHY_DIG1E_RX_ON_HOST 0x0800
+#define PHY_DIG1E_RCLK_REF_HOST 0x0400
+#define PHY_DIG1E_RCLK_TX_EN_KEEP 0x0040
+#define PHY_DIG1E_RCLK_TX_TERM_KEEP 0x0020
+#define PHY_DIG1E_RCLK_RX_EIDLE_ON 0x0010
+#define PHY_DIG1E_TX_TERM_KEEP 0x0008
+#define PHY_DIG1E_RX_TERM_KEEP 0x0004
+#define PHY_DIG1E_TX_EN_KEEP 0x0002
+#define PHY_DIG1E_RX_EN_KEEP 0x0001
#define PHY_DUM_REG 0x1F
#define PCR_SETTING_REG1 0x724
@@ -729,6 +831,8 @@ struct pcr_handle {
};
struct pcr_ops {
+ int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val);
+ int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val);
int (*extra_init_hw)(struct rtsx_pcr *pcr);
int (*optimize_phy)(struct rtsx_pcr *pcr);
int (*turn_on_led)(struct rtsx_pcr *pcr);
@@ -830,6 +934,10 @@ struct rtsx_pcr {
#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
#define PCI_VID(pcr) ((pcr)->pci->vendor)
#define PCI_PID(pcr) ((pcr)->pci->device)
+#define is_version(pcr, pid, ver) \
+ (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
+#define pcr_dbg(pcr, fmt, arg...) \
+ dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
#define SDR104_PHASE(val) ((val) & 0xFF)
#define SDR50_PHASE(val) (((val) >> 8) & 0xFF)
@@ -899,4 +1007,17 @@ static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
}
+static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr,
+ u16 mask, u16 append)
+{
+ int err;
+ u16 val;
+
+ err = rtsx_pci_read_phy_register(pcr, addr, &val);
+ if (err < 0)
+ return err;
+
+ return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append);
+}
+
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 8/9] mfd: rtsx: add support for rts525A
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
` (6 preceding siblings ...)
2015-01-22 7:30 ` [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A micky_ching
@ 2015-01-22 7:30 ` micky_ching
2015-02-16 14:37 ` Lee Jones
2015-01-22 7:30 ` [RESEND PATCH v2 9/9] mfd: rtsx: using pcr_dbg replace dev_dbg micky_ching
8 siblings, 1 reply; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
add support for new chip rts525A.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
---
drivers/mfd/rts5249.c | 104 ++++++++++++++++++++++++++++++++++++++++++-
drivers/mfd/rtsx_pcr.c | 13 ++++--
drivers/mfd/rtsx_pcr.h | 1 +
include/linux/mfd/rtsx_pci.h | 15 +++++++
4 files changed, 129 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 97dde92..134e03f 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -97,7 +97,7 @@ static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
if (pm_state == HOST_ENTER_S3) {
- if (PCI_PID(pcr) == 0x524A)
+ if (PCI_PID(pcr) == 0x524A || PCI_PID(pcr) == 0x525A)
rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
else if (PCI_PID(pcr) == 0x5249)
@@ -485,3 +485,105 @@ void rts524a_init_params(struct rtsx_pcr *pcr)
pcr->ops = &rts524a_pcr_ops;
}
+static int rts525a_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+ rtsx_pci_write_register(pcr, LDO_VCC_CFG1,
+ LDO_VCC_TUNE_MASK, LDO_VCC_3V3);
+ return rtsx_base_card_power_on(pcr, card);
+}
+
+static int rts525a_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ switch (voltage) {
+ case OUTPUT_3V3:
+ rtsx_pci_write_register(pcr, LDO_CONFIG2,
+ LDO_D3318_MASK, LDO_D3318_33V);
+ rtsx_pci_write_register(pcr, SD_PAD_CTL, SD_IO_USING_1V8, 0);
+ break;
+ case OUTPUT_1V8:
+ rtsx_pci_write_register(pcr, LDO_CONFIG2,
+ LDO_D3318_MASK, LDO_D3318_18V);
+ rtsx_pci_write_register(pcr, SD_PAD_CTL, SD_IO_USING_1V8,
+ SD_IO_USING_1V8);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rtsx_pci_init_cmd(pcr);
+ rts5249_fill_driving(pcr, voltage);
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts525a_optimize_phy(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
+ D3_DELINK_MODE_EN, 0x00);
+ if (err < 0)
+ return err;
+
+ rtsx_pci_write_phy_register(pcr, _PHY_FLD0,
+ _PHY_FLD0_CLK_REQ_20C | _PHY_FLD0_RX_IDLE_EN |
+ _PHY_FLD0_BIT_ERR_RSTN | _PHY_FLD0_BER_COUNT |
+ _PHY_FLD0_BER_TIMER | _PHY_FLD0_CHECK_EN);
+
+ rtsx_pci_write_phy_register(pcr, _PHY_ANA03,
+ _PHY_ANA03_TIMER_MAX | _PHY_ANA03_OOBS_DEB_EN |
+ _PHY_CMU_DEBUG_EN);
+
+ if (is_version(pcr, 0x525A, IC_VER_A))
+ rtsx_pci_write_phy_register(pcr, _PHY_REV0,
+ _PHY_REV0_FILTER_OUT | _PHY_REV0_CDR_BYPASS_PFD |
+ _PHY_REV0_CDR_RX_IDLE_BYPASS);
+
+ return 0;
+}
+
+static int rts525a_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ rts5249_extra_init_hw(pcr);
+
+ rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);
+ if (is_version(pcr, 0x525A, IC_VER_A)) {
+ rtsx_pci_write_register(pcr, L1SUB_CONFIG2,
+ L1SUB_AUTO_CFG, L1SUB_AUTO_CFG);
+ rtsx_pci_write_register(pcr, RREF_CFG,
+ RREF_VBGSEL_MASK, RREF_VBGSEL_1V25);
+ rtsx_pci_write_register(pcr, LDO_VIO_CFG,
+ LDO_VIO_TUNE_MASK, LDO_VIO_1V7);
+ rtsx_pci_write_register(pcr, LDO_DV12S_CFG,
+ LDO_D12_TUNE_MASK, LDO_D12_TUNE_DF);
+ rtsx_pci_write_register(pcr, LDO_AV12S_CFG,
+ LDO_AV12S_TUNE_MASK, LDO_AV12S_TUNE_DF);
+ rtsx_pci_write_register(pcr, LDO_VCC_CFG0,
+ LDO_VCC_LMTVTH_MASK, LDO_VCC_LMTVTH_2A);
+ rtsx_pci_write_register(pcr, OOBS_CONFIG,
+ OOBS_AUTOK_DIS | OOBS_VAL_MASK, 0x89);
+ }
+
+ return 0;
+}
+
+static const struct pcr_ops rts525a_pcr_ops = {
+ .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
+ .extra_init_hw = rts525a_extra_init_hw,
+ .optimize_phy = rts525a_optimize_phy,
+ .turn_on_led = rtsx_base_turn_on_led,
+ .turn_off_led = rtsx_base_turn_off_led,
+ .enable_auto_blink = rtsx_base_enable_auto_blink,
+ .disable_auto_blink = rtsx_base_disable_auto_blink,
+ .card_power_on = rts525a_card_power_on,
+ .card_power_off = rtsx_base_card_power_off,
+ .switch_output_voltage = rts525a_switch_output_voltage,
+ .force_power_down = rtsx_base_force_power_down,
+};
+
+void rts525a_init_params(struct rtsx_pcr *pcr)
+{
+ rts5249_init_params(pcr);
+
+ pcr->ops = &rts525a_pcr_ops;
+}
+
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index e6d97ad..4c47f94 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -59,6 +59,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
{ PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x524A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x525A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};
@@ -1114,6 +1115,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
rts524a_init_params(pcr);
break;
+ case 0x525A:
+ rts525a_init_params(pcr);
+ break;
+
case 0x5287:
rtl8411b_init_params(pcr);
break;
@@ -1159,7 +1164,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
struct rtsx_pcr *pcr;
struct pcr_handle *handle;
u32 base, len;
- int ret, i;
+ int ret, i, bar = 0;
dev_dbg(&(pcidev->dev),
": Realtek PCI-E Card Reader found at %s [%04x:%04x] (rev %x)\n",
@@ -1204,8 +1209,10 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
pcr->pci = pcidev;
dev_set_drvdata(&pcidev->dev, handle);
- len = pci_resource_len(pcidev, 0);
- base = pci_resource_start(pcidev, 0);
+ if (PCI_PID(pcr) == 0x525A)
+ bar = 1;
+ len = pci_resource_len(pcidev, bar);
+ base = pci_resource_start(pcidev, bar);
pcr->remap_addr = ioremap_nocache(base, len);
if (!pcr->remap_addr) {
ret = -ENOMEM;
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index e7daf6f..ce48842 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -40,6 +40,7 @@ void rtl8402_init_params(struct rtsx_pcr *pcr);
void rts5227_init_params(struct rtsx_pcr *pcr);
void rts5249_init_params(struct rtsx_pcr *pcr);
void rts524a_init_params(struct rtsx_pcr *pcr);
+void rts525a_init_params(struct rtsx_pcr *pcr);
void rtl8411b_init_params(struct rtsx_pcr *pcr);
static inline u8 map_sd_drive(int idx)
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index a392546..c4fb791 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -727,6 +727,10 @@
#define PHY_SSCCR3 0x03
#define PHY_SSCCR3_STEP_IN 0x2740
#define PHY_SSCCR3_CHECK_DELAY 0x0008
+#define _PHY_ANA03 0x03
+#define _PHY_ANA03_TIMER_MAX 0x2700
+#define _PHY_ANA03_OOBS_DEB_EN 0x0040
+#define _PHY_CMU_DEBUG_EN 0x0008
#define PHY_RTCR 0x04
#define PHY_RDR 0x05
@@ -780,6 +784,10 @@
#define PHY_REV_STOP_CLKRD 0x0020
#define PHY_REV_RX_PWST 0x0008
#define PHY_REV_STOP_CLKWR 0x0004
+#define _PHY_REV0 0x19
+#define _PHY_REV0_FILTER_OUT 0x3800
+#define _PHY_REV0_CDR_BYPASS_PFD 0x0100
+#define _PHY_REV0_CDR_RX_IDLE_BYPASS 0x0002
#define PHY_FLD0 0x1A
#define PHY_ANA1A 0x1A
@@ -795,6 +803,13 @@
#define PHY_FLD3_RXDELINK 0x0004
#define PHY_ANA1D 0x1D
#define PHY_ANA1D_DEBUG_ADDR 0x0004
+#define _PHY_FLD0 0x1D
+#define _PHY_FLD0_CLK_REQ_20C 0x8000
+#define _PHY_FLD0_RX_IDLE_EN 0x1000
+#define _PHY_FLD0_BIT_ERR_RSTN 0x0800
+#define _PHY_FLD0_BER_COUNT 0x01E0
+#define _PHY_FLD0_BER_TIMER 0x001E
+#define _PHY_FLD0_CHECK_EN 0x0001
#define PHY_FLD4 0x1E
#define PHY_FLD4_FLDEN_SEL 0x4000
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [RESEND PATCH v2 9/9] mfd: rtsx: using pcr_dbg replace dev_dbg
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
` (7 preceding siblings ...)
2015-01-22 7:30 ` [RESEND PATCH v2 8/9] mfd: rtsx: add support for rts525A micky_ching
@ 2015-01-22 7:30 ` micky_ching
8 siblings, 0 replies; 19+ messages in thread
From: micky_ching @ 2015-01-22 7:30 UTC (permalink / raw)
To: sameo, lee.jones
Cc: devel, linux-kernel, gregkh, rogerable, wei_wang, Micky Ching
From: Micky Ching <micky_ching@realsil.com.cn>
pcr_dbg is a wrapper of dev_dbg, which can save some code,
and help to enable/disable debug message static.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/rtl8411.c | 11 +++++------
drivers/mfd/rts5209.c | 4 ++--
drivers/mfd/rts5227.c | 4 ++--
drivers/mfd/rts5229.c | 4 ++--
drivers/mfd/rts5249.c | 4 ++--
drivers/mfd/rtsx_pcr.c | 49 ++++++++++++++++++++++---------------------------
6 files changed, 35 insertions(+), 41 deletions(-)
diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index fdd34c8..b3ae659 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -53,7 +53,7 @@ static void rtl8411_fetch_vendor_settings(struct rtsx_pcr *pcr)
u8 reg3 = 0;
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®1);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg1);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg1);
if (!rtsx_vendor_setting_valid(reg1))
return;
@@ -65,7 +65,7 @@ static void rtl8411_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg1);
rtsx_pci_read_config_byte(pcr, PCR_SETTING_REG3, ®3);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG3, reg3);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG3, reg3);
pcr->sd30_drive_sel_3v3 = rtl8411_reg_to_sd30_drive_sel_3v3(reg3);
}
@@ -74,7 +74,7 @@ static void rtl8411b_fetch_vendor_settings(struct rtsx_pcr *pcr)
u32 reg = 0;
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg))
return;
@@ -260,9 +260,8 @@ static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
rtsx_pci_write_register(pcr, CARD_PWR_CTL,
BPP_POWER_MASK, BPP_POWER_OFF);
- dev_dbg(&(pcr->pci->dev),
- "After CD deglitch, card_exist = 0x%x\n",
- card_exist);
+ pcr_dbg(pcr, "After CD deglitch, card_exist = 0x%x\n",
+ card_exist);
}
if (card_exist & MS_EXIST) {
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index cb04174..373e253 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -38,7 +38,7 @@ static void rts5209_fetch_vendor_settings(struct rtsx_pcr *pcr)
u32 reg;
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (rts5209_vendor_setting1_valid(reg)) {
if (rts5209_reg_check_ms_pmos(reg))
@@ -47,7 +47,7 @@ static void rts5209_fetch_vendor_settings(struct rtsx_pcr *pcr)
}
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
if (rts5209_vendor_setting2_valid(reg)) {
pcr->sd30_drive_sel_1v8 =
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index 0c02831..ce012d7 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -63,7 +63,7 @@ static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr)
u32 reg;
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg))
return;
@@ -74,7 +74,7 @@ static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
if (rtsx_reg_check_reverse_socket(reg))
pcr->flags |= PCR_REVERSE_SOCKET;
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index 6353f5d..ace4538 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -38,7 +38,7 @@ static void rts5229_fetch_vendor_settings(struct rtsx_pcr *pcr)
u32 reg;
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg))
return;
@@ -50,7 +50,7 @@ static void rts5229_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
pcr->sd30_drive_sel_3v3 =
map_sd_drive(rtsx_reg_to_sd30_drive_sel_3v3(reg));
}
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 134e03f..663d4e3 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -70,7 +70,7 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
u32 reg;
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg)) {
pcr_dbg(pcr, "skip fetch vendor setting\n");
@@ -83,7 +83,7 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, ®);
- dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
if (rtsx_reg_check_reverse_socket(reg))
pcr->flags |= PCR_REVERSE_SOCKET;
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 4c47f94..e11d6fb 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -316,8 +316,7 @@ int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout)
timeleft = wait_for_completion_interruptible_timeout(
&trans_done, msecs_to_jiffies(timeout));
if (timeleft <= 0) {
- dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
- __func__, __LINE__);
+ pcr_dbg(pcr, "Timeout (%s %d)\n", __func__, __LINE__);
err = -ETIMEDOUT;
goto finish_send_cmd;
}
@@ -353,8 +352,7 @@ static void rtsx_pci_add_sg_tbl(struct rtsx_pcr *pcr,
u64 val;
u8 option = SG_VALID | SG_TRANS_DATA;
- dev_dbg(&(pcr->pci->dev), "DMA addr: 0x%x, Len: 0x%x\n",
- (unsigned int)addr, len);
+ pcr_dbg(pcr, "DMA addr: 0x%x, Len: 0x%x\n", (unsigned int)addr, len);
if (end)
option |= SG_END;
@@ -369,11 +367,11 @@ int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
{
int err = 0, count;
- dev_dbg(&(pcr->pci->dev), "--> %s: num_sg = %d\n", __func__, num_sg);
+ pcr_dbg(pcr, "--> %s: num_sg = %d\n", __func__, num_sg);
count = rtsx_pci_dma_map_sg(pcr, sglist, num_sg, read);
if (count < 1)
return -EINVAL;
- dev_dbg(&(pcr->pci->dev), "DMA mapping count: %d\n", count);
+ pcr_dbg(pcr, "DMA mapping count: %d\n", count);
err = rtsx_pci_dma_transfer(pcr, sglist, count, read, timeout);
@@ -447,8 +445,7 @@ int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
timeleft = wait_for_completion_interruptible_timeout(
&trans_done, msecs_to_jiffies(timeout));
if (timeleft <= 0) {
- dev_dbg(&(pcr->pci->dev), "Timeout (%s %d)\n",
- __func__, __LINE__);
+ pcr_dbg(pcr, "Timeout (%s %d)\n", __func__, __LINE__);
err = -ETIMEDOUT;
goto out;
}
@@ -622,7 +619,7 @@ static void rtsx_pci_enable_bus_int(struct rtsx_pcr *pcr)
/* Enable Bus Interrupt */
rtsx_pci_writel(pcr, RTSX_BIER, pcr->bier);
- dev_dbg(&(pcr->pci->dev), "RTSX_BIER: 0x%08x\n", pcr->bier);
+ pcr_dbg(pcr, "RTSX_BIER: 0x%08x\n", pcr->bier);
}
static inline u8 double_ssc_depth(u8 depth)
@@ -668,14 +665,13 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
return err;
card_clock /= 1000000;
- dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock);
+ pcr_dbg(pcr, "Switch card clock to %dMHz\n", card_clock);
clk = card_clock;
if (!initial_mode && double_clk)
clk = card_clock * 2;
- dev_dbg(&(pcr->pci->dev),
- "Internal SSC clock: %dMHz (cur_clock = %d)\n",
- clk, pcr->cur_clock);
+ pcr_dbg(pcr, "Internal SSC clock: %dMHz (cur_clock = %d)\n",
+ clk, pcr->cur_clock);
if (clk == pcr->cur_clock)
return 0;
@@ -704,14 +700,14 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
}
div++;
}
- dev_dbg(&(pcr->pci->dev), "n = %d, div = %d\n", n, div);
+ pcr_dbg(pcr, "n = %d, div = %d\n", n, div);
ssc_depth = depth[ssc_depth];
if (double_clk)
ssc_depth = double_ssc_depth(ssc_depth);
ssc_depth = revise_ssc_depth(ssc_depth, div);
- dev_dbg(&(pcr->pci->dev), "ssc_depth = %d\n", ssc_depth);
+ pcr_dbg(pcr, "ssc_depth = %d\n", ssc_depth);
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
@@ -833,13 +829,13 @@ static void rtsx_pci_card_detect(struct work_struct *work)
dwork = to_delayed_work(work);
pcr = container_of(dwork, struct rtsx_pcr, carddet_work);
- dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__);
+ pcr_dbg(pcr, "--> %s\n", __func__);
mutex_lock(&pcr->pcr_mutex);
spin_lock_irqsave(&pcr->lock, flags);
irq_status = rtsx_pci_readl(pcr, RTSX_BIPR);
- dev_dbg(&(pcr->pci->dev), "irq_status: 0x%08x\n", irq_status);
+ pcr_dbg(pcr, "irq_status: 0x%08x\n", irq_status);
irq_status &= CARD_EXIST;
card_inserted = pcr->card_inserted & irq_status;
@@ -850,9 +846,8 @@ static void rtsx_pci_card_detect(struct work_struct *work)
spin_unlock_irqrestore(&pcr->lock, flags);
if (card_inserted || card_removed) {
- dev_dbg(&(pcr->pci->dev),
- "card_inserted: 0x%x, card_removed: 0x%x\n",
- card_inserted, card_removed);
+ pcr_dbg(pcr, "card_inserted: 0x%x, card_removed: 0x%x\n",
+ card_inserted, card_removed);
if (pcr->ops->cd_deglitch)
card_inserted = pcr->ops->cd_deglitch(pcr);
@@ -960,7 +955,7 @@ static void rtsx_pci_idle_work(struct work_struct *work)
struct delayed_work *dwork = to_delayed_work(work);
struct rtsx_pcr *pcr = container_of(dwork, struct rtsx_pcr, idle_work);
- dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__);
+ pcr_dbg(pcr, "--> %s\n", __func__);
mutex_lock(&pcr->pcr_mutex);
@@ -1128,7 +1123,7 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
break;
}
- dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",
+ pcr_dbg(pcr, "PID: 0x%04x, IC version: 0x%02x\n",
PCI_PID(pcr), pcr->ic_version);
pcr->slots = kcalloc(pcr->num_slots, sizeof(struct rtsx_slot),
@@ -1139,14 +1134,14 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
if (pcr->ops->fetch_vendor_settings)
pcr->ops->fetch_vendor_settings(pcr);
- dev_dbg(&(pcr->pci->dev), "pcr->aspm_en = 0x%x\n", pcr->aspm_en);
- dev_dbg(&(pcr->pci->dev), "pcr->sd30_drive_sel_1v8 = 0x%x\n",
+ pcr_dbg(pcr, "pcr->aspm_en = 0x%x\n", pcr->aspm_en);
+ pcr_dbg(pcr, "pcr->sd30_drive_sel_1v8 = 0x%x\n",
pcr->sd30_drive_sel_1v8);
- dev_dbg(&(pcr->pci->dev), "pcr->sd30_drive_sel_3v3 = 0x%x\n",
+ pcr_dbg(pcr, "pcr->sd30_drive_sel_3v3 = 0x%x\n",
pcr->sd30_drive_sel_3v3);
- dev_dbg(&(pcr->pci->dev), "pcr->card_drive_sel = 0x%x\n",
+ pcr_dbg(pcr, "pcr->card_drive_sel = 0x%x\n",
pcr->card_drive_sel);
- dev_dbg(&(pcr->pci->dev), "pcr->flags = 0x%x\n", pcr->flags);
+ pcr_dbg(pcr, "pcr->flags = 0x%x\n", pcr->flags);
pcr->state = PDEV_STAT_IDLE;
err = rtsx_pci_init_hw(pcr);
--
1.9.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 4/9] mfd: rtsx: update driving settings
2015-01-22 7:30 ` [RESEND PATCH v2 4/9] mfd: rtsx: update driving settings micky_ching
@ 2015-01-22 7:40 ` Joe Perches
0 siblings, 0 replies; 19+ messages in thread
From: Joe Perches @ 2015-01-22 7:40 UTC (permalink / raw)
To: micky_ching
Cc: sameo, lee.jones, devel, linux-kernel, gregkh, rogerable, wei_wang
On Thu, 2015-01-22 at 15:30 +0800, micky_ching@realsil.com.cn wrote:
> update card drive settings, This setting can be used for rts5249
> rts524A and rts525A.
[]
> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> @@ -36,16 +36,16 @@ static u8 rts5249_get_ic_version(struct rtsx_pcr *pcr)
> static void rts5249_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
> {
> u8 driving_3v3[4][3] = {
It'd be nice to make these arrays static const
> - {0x11, 0x11, 0x11},
> + {0x11, 0x11, 0x18},
> {0x55, 0x55, 0x5C},
> - {0x99, 0x99, 0x92},
> - {0x99, 0x99, 0x92},
> + {0xFF, 0xFF, 0xFF},
> + {0x96, 0x96, 0x96},
> };
> u8 driving_1v8[4][3] = {
> + {0xC4, 0xC4, 0xC4},
> {0x3C, 0x3C, 0x3C},
> - {0xB3, 0xB3, 0xB3},
> {0xFE, 0xFE, 0xFE},
> - {0xC4, 0xC4, 0xC4},
> + {0xB3, 0xB3, 0xB3},
> };
> u8 (*driving)[3], drive_sel;
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A
2015-01-22 7:30 ` [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A micky_ching
@ 2015-02-02 1:07 ` 敬锐
2015-02-02 8:52 ` Lee Jones
2015-02-16 14:28 ` Lee Jones
1 sibling, 1 reply; 19+ messages in thread
From: 敬锐 @ 2015-02-02 1:07 UTC (permalink / raw)
To: sameo, lee.jones; +Cc: devel, linux-kernel, gregkh, rogerable, 王炜
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 21046 bytes --]
Hi Lee,
do you have reviewed this patchset?
regards.
micky.
On 01/22/2015 03:30 PM, micky_ching@realsil.com.cn wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> add support for new chip rts524A.
>
> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> ---
> drivers/mfd/rts5249.c | 186 ++++++++++++++++++++++++++++++++++++-------
> drivers/mfd/rtsx_pcr.c | 25 +++++-
> drivers/mfd/rtsx_pcr.h | 7 ++
> include/linux/mfd/rtsx_pci.h | 125 ++++++++++++++++++++++++++++-
> 4 files changed, 310 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> index 3977946..97dde92 100644
> --- a/drivers/mfd/rts5249.c
> +++ b/drivers/mfd/rts5249.c
> @@ -65,15 +65,17 @@ static void rts5249_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
> 0xFF, driving[drive_sel][2]);
> }
>
> -static void rts5249_fetch_vendor_settings(struct rtsx_pcr *pcr)
> +static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
> {
> u32 reg;
>
> rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
> dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
>
> - if (!rtsx_vendor_setting_valid(reg))
> + if (!rtsx_vendor_setting_valid(reg)) {
> + pcr_dbg(pcr, "skip fetch vendor setting\n");
> return;
> + }
>
> pcr->aspm_en = rtsx_reg_to_aspm(reg);
> pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
> @@ -87,15 +89,21 @@ static void rts5249_fetch_vendor_settings(struct rtsx_pcr *pcr)
> pcr->flags |= PCR_REVERSE_SOCKET;
> }
>
> -static void rts5249_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> +static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> {
> /* Set relink_time to 0 */
> rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, 0xFF, 0);
> rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, 0xFF, 0);
> rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
>
> - if (pm_state == HOST_ENTER_S3)
> - rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);
> + if (pm_state == HOST_ENTER_S3) {
> + if (PCI_PID(pcr) == 0x524A)
> + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> + D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
> + else if (PCI_PID(pcr) == 0x5249)
> + rtsx_pci_write_register(pcr, PM_CTRL3,
> + D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
> + }
>
> rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
> }
> @@ -104,6 +112,8 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
> {
> rtsx_pci_init_cmd(pcr);
>
> + /* Rest L1SUB Config */
> + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, L1SUB_CONFIG3, 0xFF, 0x00);
> /* Configure GPIO as output */
> rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
> /* Reset ASPM state to default value */
> @@ -189,27 +199,27 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
> PHY_TUNE_TUNED12 | PHY_TUNE_TUNEA12);
> }
>
> -static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
> +static int rtsx_base_turn_on_led(struct rtsx_pcr *pcr)
> {
> return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
> }
>
> -static int rts5249_turn_off_led(struct rtsx_pcr *pcr)
> +static int rtsx_base_turn_off_led(struct rtsx_pcr *pcr)
> {
> return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
> }
>
> -static int rts5249_enable_auto_blink(struct rtsx_pcr *pcr)
> +static int rtsx_base_enable_auto_blink(struct rtsx_pcr *pcr)
> {
> return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
> }
>
> -static int rts5249_disable_auto_blink(struct rtsx_pcr *pcr)
> +static int rtsx_base_disable_auto_blink(struct rtsx_pcr *pcr)
> {
> return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
> }
>
> -static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
> +static int rtsx_base_card_power_on(struct rtsx_pcr *pcr, int card)
> {
> int err;
>
> @@ -236,7 +246,7 @@ static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
> return 0;
> }
>
> -static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
> +static int rtsx_base_card_power_off(struct rtsx_pcr *pcr, int card)
> {
> rtsx_pci_init_cmd(pcr);
> rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
> @@ -246,22 +256,31 @@ static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
> return rtsx_pci_send_cmd(pcr, 100);
> }
>
> -static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> +static int rtsx_base_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> {
> int err;
> + u16 append;
>
> - if (voltage == OUTPUT_3V3) {
> - err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4FC0 | 0x24);
> - if (err < 0)
> - return err;
> - } else if (voltage == OUTPUT_1V8) {
> - err = rtsx_pci_write_phy_register(pcr, PHY_BACR, 0x3C02);
> + switch (voltage) {
> + case OUTPUT_3V3:
> + err = rtsx_pci_update_phy(pcr, PHY_TUNE, 0xFC3F, 0x03C0);
> if (err < 0)
> return err;
> - err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4C40 | 0x24);
> + break;
> + case OUTPUT_1V8:
> + append = 0x0100;
> + if (PCI_PID(pcr) == 0x5249) {
> + err = rtsx_pci_update_phy(pcr, PHY_BACR, 0xFFF3, 0);
> + if (err < 0)
> + return err;
> + append = 0x0080;
> + }
> +
> + err = rtsx_pci_update_phy(pcr, PHY_TUNE, 0xFC3F, append);
> if (err < 0)
> return err;
> - } else {
> + break;
> + default:
> return -EINVAL;
> }
>
> @@ -272,17 +291,17 @@ static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> }
>
> static const struct pcr_ops rts5249_pcr_ops = {
> - .fetch_vendor_settings = rts5249_fetch_vendor_settings,
> + .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
> .extra_init_hw = rts5249_extra_init_hw,
> .optimize_phy = rts5249_optimize_phy,
> - .turn_on_led = rts5249_turn_on_led,
> - .turn_off_led = rts5249_turn_off_led,
> - .enable_auto_blink = rts5249_enable_auto_blink,
> - .disable_auto_blink = rts5249_disable_auto_blink,
> - .card_power_on = rts5249_card_power_on,
> - .card_power_off = rts5249_card_power_off,
> - .switch_output_voltage = rts5249_switch_output_voltage,
> - .force_power_down = rts5249_force_power_down,
> + .turn_on_led = rtsx_base_turn_on_led,
> + .turn_off_led = rtsx_base_turn_off_led,
> + .enable_auto_blink = rtsx_base_enable_auto_blink,
> + .disable_auto_blink = rtsx_base_disable_auto_blink,
> + .card_power_on = rtsx_base_card_power_on,
> + .card_power_off = rtsx_base_card_power_off,
> + .switch_output_voltage = rtsx_base_switch_output_voltage,
> + .force_power_down = rtsx_base_force_power_down,
> };
>
> /* SD Pull Control Enable:
> @@ -357,3 +376,112 @@ void rts5249_init_params(struct rtsx_pcr *pcr)
> pcr->ms_pull_ctl_enable_tbl = rts5249_ms_pull_ctl_enable_tbl;
> pcr->ms_pull_ctl_disable_tbl = rts5249_ms_pull_ctl_disable_tbl;
> }
> +
> +static int rts524a_write_phy(struct rtsx_pcr *pcr, u8 addr, u16 val)
> +{
> + addr = addr & 0x80 ? (addr & 0x7F) | 0x40 : addr;
> +
> + return __rtsx_pci_write_phy_register(pcr, addr, val);
> +}
> +
> +static int rts524a_read_phy(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> +{
> + addr = addr & 0x80 ? (addr & 0x7F) | 0x40 : addr;
> +
> + return __rtsx_pci_read_phy_register(pcr, addr, val);
> +}
> +
> +static int rts524a_optimize_phy(struct rtsx_pcr *pcr)
> +{
> + int err;
> +
> + err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> + D3_DELINK_MODE_EN, 0x00);
> + if (err < 0)
> + return err;
> +
> + rtsx_pci_write_phy_register(pcr, PHY_PCR,
> + PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
> + PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 | PHY_PCR_RSSI_EN);
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> +
> + if (is_version(pcr, 0x524A, IC_VER_A)) {
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR2,
> + PHY_SSCCR2_PLL_NCODE | PHY_SSCCR2_TIME0 |
> + PHY_SSCCR2_TIME2_WIDTH);
> + rtsx_pci_write_phy_register(pcr, PHY_ANA1A,
> + PHY_ANA1A_TXR_LOOPBACK | PHY_ANA1A_RXT_BIST |
> + PHY_ANA1A_TXR_BIST | PHY_ANA1A_REV);
> + rtsx_pci_write_phy_register(pcr, PHY_ANA1D,
> + PHY_ANA1D_DEBUG_ADDR);
> + rtsx_pci_write_phy_register(pcr, PHY_DIG1E,
> + PHY_DIG1E_REV | PHY_DIG1E_D0_X_D1 |
> + PHY_DIG1E_RX_ON_HOST | PHY_DIG1E_RCLK_REF_HOST |
> + PHY_DIG1E_RCLK_TX_EN_KEEP |
> + PHY_DIG1E_RCLK_TX_TERM_KEEP |
> + PHY_DIG1E_RCLK_RX_EIDLE_ON | PHY_DIG1E_TX_TERM_KEEP |
> + PHY_DIG1E_RX_TERM_KEEP | PHY_DIG1E_TX_EN_KEEP |
> + PHY_DIG1E_RX_EN_KEEP);
> + }
> +
> + rtsx_pci_write_phy_register(pcr, PHY_ANA08,
> + PHY_ANA08_RX_EQ_DCGAIN | PHY_ANA08_SEL_RX_EN |
> + PHY_ANA08_RX_EQ_VAL | PHY_ANA08_SCP | PHY_ANA08_SEL_IPI);
> +
> + return 0;
> +}
> +
> +static int rts524a_extra_init_hw(struct rtsx_pcr *pcr)
> +{
> + rts5249_extra_init_hw(pcr);
> +
> + rtsx_pci_write_register(pcr, FUNC_FORCE_CTL,
> + FORCE_ASPM_L1_EN, FORCE_ASPM_L1_EN);
> + rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
> + rtsx_pci_write_register(pcr, LDO_VCC_CFG1, LDO_VCC_LMT_EN,
> + LDO_VCC_LMT_EN);
> + rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);
> + if (is_version(pcr, 0x524A, IC_VER_A)) {
> + rtsx_pci_write_register(pcr, LDO_DV18_CFG,
> + LDO_DV18_SR_MASK, LDO_DV18_SR_DF);
> + rtsx_pci_write_register(pcr, LDO_VCC_CFG1,
> + LDO_VCC_REF_TUNE_MASK, LDO_VCC_REF_1V2);
> + rtsx_pci_write_register(pcr, LDO_VIO_CFG,
> + LDO_VIO_REF_TUNE_MASK, LDO_VIO_REF_1V2);
> + rtsx_pci_write_register(pcr, LDO_VIO_CFG,
> + LDO_VIO_SR_MASK, LDO_VIO_SR_DF);
> + rtsx_pci_write_register(pcr, LDO_DV12S_CFG,
> + LDO_REF12_TUNE_MASK, LDO_REF12_TUNE_DF);
> + rtsx_pci_write_register(pcr, SD40_LDO_CTL1,
> + SD40_VIO_TUNE_MASK, SD40_VIO_TUNE_1V7);
> + }
> +
> + return 0;
> +}
> +
> +static const struct pcr_ops rts524a_pcr_ops = {
> + .write_phy = rts524a_write_phy,
> + .read_phy = rts524a_read_phy,
> + .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
> + .extra_init_hw = rts524a_extra_init_hw,
> + .optimize_phy = rts524a_optimize_phy,
> + .turn_on_led = rtsx_base_turn_on_led,
> + .turn_off_led = rtsx_base_turn_off_led,
> + .enable_auto_blink = rtsx_base_enable_auto_blink,
> + .disable_auto_blink = rtsx_base_disable_auto_blink,
> + .card_power_on = rtsx_base_card_power_on,
> + .card_power_off = rtsx_base_card_power_off,
> + .switch_output_voltage = rtsx_base_switch_output_voltage,
> + .force_power_down = rtsx_base_force_power_down,
> +};
> +
> +void rts524a_init_params(struct rtsx_pcr *pcr)
> +{
> + rts5249_init_params(pcr);
> +
> + pcr->ops = &rts524a_pcr_ops;
> +}
> +
> diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
> index 81b9c2c..e6d97ad 100644
> --- a/drivers/mfd/rtsx_pcr.c
> +++ b/drivers/mfd/rtsx_pcr.c
> @@ -58,6 +58,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
> { PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> + { PCI_DEVICE(0x10EC, 0x524A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { 0, }
> };
>
> @@ -142,7 +143,7 @@ int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data)
> }
> EXPORT_SYMBOL_GPL(rtsx_pci_read_register);
>
> -int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> +int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> {
> int err, i, finished = 0;
> u8 tmp;
> @@ -174,9 +175,17 @@ int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
>
> return 0;
> }
> +
> +int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> +{
> + if (pcr->ops->write_phy)
> + return pcr->ops->write_phy(pcr, addr, val);
> +
> + return __rtsx_pci_write_phy_register(pcr, addr, val);
> +}
> EXPORT_SYMBOL_GPL(rtsx_pci_write_phy_register);
>
> -int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> +int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> {
> int err, i, finished = 0;
> u16 data;
> @@ -222,6 +231,14 @@ int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
>
> return 0;
> }
> +
> +int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> +{
> + if (pcr->ops->read_phy)
> + return pcr->ops->read_phy(pcr, addr, val);
> +
> + return __rtsx_pci_read_phy_register(pcr, addr, val);
> +}
> EXPORT_SYMBOL_GPL(rtsx_pci_read_phy_register);
>
> void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
> @@ -1093,6 +1110,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
> rts5249_init_params(pcr);
> break;
>
> + case 0x524A:
> + rts524a_init_params(pcr);
> + break;
> +
> case 0x5287:
> rtl8411b_init_params(pcr);
> break;
> diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
> index fe2bbb6..e7daf6f 100644
> --- a/drivers/mfd/rtsx_pcr.h
> +++ b/drivers/mfd/rtsx_pcr.h
> @@ -27,12 +27,19 @@
> #define MIN_DIV_N_PCR 80
> #define MAX_DIV_N_PCR 208
>
> +#define RTS524A_PME_FORCE_CTL 0xFF78
> +#define RTS524A_PM_CTRL3 0xFF7E
> +
> +int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
> +int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
> +
> void rts5209_init_params(struct rtsx_pcr *pcr);
> void rts5229_init_params(struct rtsx_pcr *pcr);
> void rtl8411_init_params(struct rtsx_pcr *pcr);
> void rtl8402_init_params(struct rtsx_pcr *pcr);
> void rts5227_init_params(struct rtsx_pcr *pcr);
> void rts5249_init_params(struct rtsx_pcr *pcr);
> +void rts524a_init_params(struct rtsx_pcr *pcr);
> void rtl8411b_init_params(struct rtsx_pcr *pcr);
>
> static inline u8 map_sd_drive(int idx)
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index 33cc63c..a392546 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -577,8 +577,16 @@
>
> #define CDRESUMECTL 0xFE52
> #define WAKE_SEL_CTL 0xFE54
> +#define PCLK_CTL 0xFE55
> +#define PCLK_MODE_SEL 0x20
> #define PME_FORCE_CTL 0xFE56
> +
> #define ASPM_FORCE_CTL 0xFE57
> +#define FORCE_ASPM_CTL0 0x10
> +#define FORCE_ASPM_VAL_MASK 0x03
> +#define FORCE_ASPM_L1_EN 0x02
> +#define FORCE_ASPM_L0_EN 0x01
> +#define FORCE_ASPM_NO_ASPM 0x00
> #define PM_CLK_FORCE_CTL 0xFE58
> #define FUNC_FORCE_CTL 0xFE59
> #define PERST_GLITCH_WIDTH 0xFE5C
> @@ -590,7 +598,8 @@
> #define HOST_ENTER_S3 2
>
> #define SDIO_CFG 0xFE70
> -
> +#define PM_EVENT_DEBUG 0xFE71
> +#define PME_DEBUG_0 0x08
> #define NFTS_TX_CTRL 0xFE72
>
> #define PWR_GATE_CTRL 0xFE75
> @@ -602,12 +611,19 @@
> #define PWD_SUSPEND_EN 0xFE76
> #define LDO_PWR_SEL 0xFE78
>
> +#define L1SUB_CONFIG1 0xFE8D
> +#define L1SUB_CONFIG2 0xFE8E
> +#define L1SUB_AUTO_CFG 0x02
> +#define L1SUB_CONFIG3 0xFE8F
> +
> #define DUMMY_REG_RESET_0 0xFE90
>
> #define AUTOLOAD_CFG_BASE 0xFF00
> #define PETXCFG 0xFF03
>
> #define PM_CTRL1 0xFF44
> +#define CD_RESUME_EN_MASK 0xF0
> +
> #define PM_CTRL2 0xFF45
> #define PM_CTRL3 0xFF46
> #define SDIO_SEND_PME_EN 0x80
> @@ -628,6 +644,61 @@
> #define IMAGE_FLAG_ADDR0 0xCE80
> #define IMAGE_FLAG_ADDR1 0xCE81
>
> +#define RREF_CFG 0xFF6C
> +#define RREF_VBGSEL_MASK 0x38
> +#define RREF_VBGSEL_1V25 0x28
> +
> +#define OOBS_CONFIG 0xFF6E
> +#define OOBS_AUTOK_DIS 0x80
> +#define OOBS_VAL_MASK 0x1F
> +
> +#define LDO_DV18_CFG 0xFF70
> +#define LDO_DV18_SR_MASK 0xC0
> +#define LDO_DV18_SR_DF 0x40
> +
> +#define LDO_CONFIG2 0xFF71
> +#define LDO_D3318_MASK 0x07
> +#define LDO_D3318_33V 0x07
> +#define LDO_D3318_18V 0x02
> +
> +#define LDO_VCC_CFG0 0xFF72
> +#define LDO_VCC_LMTVTH_MASK 0x30
> +#define LDO_VCC_LMTVTH_2A 0x10
> +
> +#define LDO_VCC_CFG1 0xFF73
> +#define LDO_VCC_REF_TUNE_MASK 0x30
> +#define LDO_VCC_REF_1V2 0x20
> +#define LDO_VCC_TUNE_MASK 0x07
> +#define LDO_VCC_1V8 0x04
> +#define LDO_VCC_3V3 0x07
> +#define LDO_VCC_LMT_EN 0x08
> +
> +#define LDO_VIO_CFG 0xFF75
> +#define LDO_VIO_SR_MASK 0xC0
> +#define LDO_VIO_SR_DF 0x40
> +#define LDO_VIO_REF_TUNE_MASK 0x30
> +#define LDO_VIO_REF_1V2 0x20
> +#define LDO_VIO_TUNE_MASK 0x07
> +#define LDO_VIO_1V7 0x03
> +#define LDO_VIO_1V8 0x04
> +#define LDO_VIO_3V3 0x07
> +
> +#define LDO_DV12S_CFG 0xFF76
> +#define LDO_REF12_TUNE_MASK 0x18
> +#define LDO_REF12_TUNE_DF 0x10
> +#define LDO_D12_TUNE_MASK 0x07
> +#define LDO_D12_TUNE_DF 0x04
> +
> +#define LDO_AV12S_CFG 0xFF77
> +#define LDO_AV12S_TUNE_MASK 0x07
> +#define LDO_AV12S_TUNE_DF 0x04
> +
> +#define SD40_LDO_CTL1 0xFE7D
> +#define SD40_VIO_TUNE_MASK 0x70
> +#define SD40_VIO_TUNE_1V7 0x30
> +#define SD_VIO_LDO_1V8 0x40
> +#define SD_VIO_LDO_3V3 0x70
> +
> /* Phy register */
> #define PHY_PCR 0x00
> #define PHY_PCR_FORCE_CODE 0xB000
> @@ -641,6 +712,10 @@
> #define PHY_RCR1 0x02
> #define PHY_RCR1_ADP_TIME_4 0x0400
> #define PHY_RCR1_VCO_COARSE 0x001F
> +#define PHY_SSCCR2 0x02
> +#define PHY_SSCCR2_PLL_NCODE 0x0A00
> +#define PHY_SSCCR2_TIME0 0x001C
> +#define PHY_SSCCR2_TIME2_WIDTH 0x0003
>
> #define PHY_RCR2 0x03
> #define PHY_RCR2_EMPHASE_EN 0x8000
> @@ -649,6 +724,9 @@
> #define PHY_RCR2_FREQSEL_12 0x0040
> #define PHY_RCR2_CDR_SC_12P 0x0010
> #define PHY_RCR2_CALIB_LATE 0x0002
> +#define PHY_SSCCR3 0x03
> +#define PHY_SSCCR3_STEP_IN 0x2740
> +#define PHY_SSCCR3_CHECK_DELAY 0x0008
>
> #define PHY_RTCR 0x04
> #define PHY_RDR 0x05
> @@ -663,6 +741,12 @@
> #define PHY_TUNE_TUNED18 0x01C0
> #define PHY_TUNE_TUNED12 0X0020
> #define PHY_TUNE_TUNEA12 0x0004
> +#define PHY_ANA08 0x08
> +#define PHY_ANA08_RX_EQ_DCGAIN 0x5000
> +#define PHY_ANA08_SEL_RX_EN 0x0400
> +#define PHY_ANA08_RX_EQ_VAL 0x03C0
> +#define PHY_ANA08_SCP 0x0020
> +#define PHY_ANA08_SEL_IPI 0x0004
>
> #define PHY_IMR 0x09
> #define PHY_BPCR 0x0A
> @@ -698,12 +782,19 @@
> #define PHY_REV_STOP_CLKWR 0x0004
>
> #define PHY_FLD0 0x1A
> +#define PHY_ANA1A 0x1A
> +#define PHY_ANA1A_TXR_LOOPBACK 0x2000
> +#define PHY_ANA1A_RXT_BIST 0x0500
> +#define PHY_ANA1A_TXR_BIST 0x0040
> +#define PHY_ANA1A_REV 0x0006
> #define PHY_FLD1 0x1B
> #define PHY_FLD2 0x1C
> #define PHY_FLD3 0x1D
> #define PHY_FLD3_TIMER_4 0x0800
> #define PHY_FLD3_TIMER_6 0x0020
> #define PHY_FLD3_RXDELINK 0x0004
> +#define PHY_ANA1D 0x1D
> +#define PHY_ANA1D_DEBUG_ADDR 0x0004
>
> #define PHY_FLD4 0x1E
> #define PHY_FLD4_FLDEN_SEL 0x4000
> @@ -713,7 +804,18 @@
> #define PHY_FLD4_BER_COUNT 0x00E0
> #define PHY_FLD4_BER_TIMER 0x000A
> #define PHY_FLD4_BER_CHK_EN 0x0001
> -
> +#define PHY_DIG1E 0x1E
> +#define PHY_DIG1E_REV 0x4000
> +#define PHY_DIG1E_D0_X_D1 0x1000
> +#define PHY_DIG1E_RX_ON_HOST 0x0800
> +#define PHY_DIG1E_RCLK_REF_HOST 0x0400
> +#define PHY_DIG1E_RCLK_TX_EN_KEEP 0x0040
> +#define PHY_DIG1E_RCLK_TX_TERM_KEEP 0x0020
> +#define PHY_DIG1E_RCLK_RX_EIDLE_ON 0x0010
> +#define PHY_DIG1E_TX_TERM_KEEP 0x0008
> +#define PHY_DIG1E_RX_TERM_KEEP 0x0004
> +#define PHY_DIG1E_TX_EN_KEEP 0x0002
> +#define PHY_DIG1E_RX_EN_KEEP 0x0001
> #define PHY_DUM_REG 0x1F
>
> #define PCR_SETTING_REG1 0x724
> @@ -729,6 +831,8 @@ struct pcr_handle {
> };
>
> struct pcr_ops {
> + int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val);
> + int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val);
> int (*extra_init_hw)(struct rtsx_pcr *pcr);
> int (*optimize_phy)(struct rtsx_pcr *pcr);
> int (*turn_on_led)(struct rtsx_pcr *pcr);
> @@ -830,6 +934,10 @@ struct rtsx_pcr {
> #define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
> #define PCI_VID(pcr) ((pcr)->pci->vendor)
> #define PCI_PID(pcr) ((pcr)->pci->device)
> +#define is_version(pcr, pid, ver) \
> + (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
> +#define pcr_dbg(pcr, fmt, arg...) \
> + dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
>
> #define SDR104_PHASE(val) ((val) & 0xFF)
> #define SDR50_PHASE(val) (((val) >> 8) & 0xFF)
> @@ -899,4 +1007,17 @@ static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
> rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
> }
>
> +static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr,
> + u16 mask, u16 append)
> +{
> + int err;
> + u16 val;
> +
> + err = rtsx_pci_read_phy_register(pcr, addr, &val);
> + if (err < 0)
> + return err;
> +
> + return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append);
> +}
> +
> #endif
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A
2015-02-02 1:07 ` 敬锐
@ 2015-02-02 8:52 ` Lee Jones
0 siblings, 0 replies; 19+ messages in thread
From: Lee Jones @ 2015-02-02 8:52 UTC (permalink / raw)
To: 敬锐
Cc: sameo, devel, linux-kernel, gregkh, rogerable, 王炜
> do you have reviewed this patchset?
Yes, but ...
a) You only sent it 7 working days ago -- give me a chance
b) We are already at -rc7, so I have stopped accepting patches
c) I currently have my head buried under a tonne of my own work
... so please don't nag -- you're beginning to sound like my Mrs! ;)
> On 01/22/2015 03:30 PM, micky_ching@realsil.com.cn wrote:
> > From: Micky Ching <micky_ching@realsil.com.cn>
> >
> > add support for new chip rts524A.
> >
> > Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> > ---
> > drivers/mfd/rts5249.c | 186 ++++++++++++++++++++++++++++++++++++-------
> > drivers/mfd/rtsx_pcr.c | 25 +++++-
> > drivers/mfd/rtsx_pcr.h | 7 ++
> > include/linux/mfd/rtsx_pci.h | 125 ++++++++++++++++++++++++++++-
> > 4 files changed, 310 insertions(+), 33 deletions(-)
> >
> > diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> > index 3977946..97dde92 100644
> > --- a/drivers/mfd/rts5249.c
> > +++ b/drivers/mfd/rts5249.c
> > @@ -65,15 +65,17 @@ static void rts5249_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
> > 0xFF, driving[drive_sel][2]);
> > }
> >
> > -static void rts5249_fetch_vendor_settings(struct rtsx_pcr *pcr)
> > +static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
> > {
> > u32 reg;
> >
> > rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
> > dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
> >
> > - if (!rtsx_vendor_setting_valid(reg))
> > + if (!rtsx_vendor_setting_valid(reg)) {
> > + pcr_dbg(pcr, "skip fetch vendor setting\n");
> > return;
> > + }
> >
> > pcr->aspm_en = rtsx_reg_to_aspm(reg);
> > pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
> > @@ -87,15 +89,21 @@ static void rts5249_fetch_vendor_settings(struct rtsx_pcr *pcr)
> > pcr->flags |= PCR_REVERSE_SOCKET;
> > }
> >
> > -static void rts5249_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> > +static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> > {
> > /* Set relink_time to 0 */
> > rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, 0xFF, 0);
> > rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, 0xFF, 0);
> > rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
> >
> > - if (pm_state == HOST_ENTER_S3)
> > - rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);
> > + if (pm_state == HOST_ENTER_S3) {
> > + if (PCI_PID(pcr) == 0x524A)
> > + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> > + D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
> > + else if (PCI_PID(pcr) == 0x5249)
> > + rtsx_pci_write_register(pcr, PM_CTRL3,
> > + D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
> > + }
> >
> > rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
> > }
> > @@ -104,6 +112,8 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
> > {
> > rtsx_pci_init_cmd(pcr);
> >
> > + /* Rest L1SUB Config */
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, L1SUB_CONFIG3, 0xFF, 0x00);
> > /* Configure GPIO as output */
> > rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
> > /* Reset ASPM state to default value */
> > @@ -189,27 +199,27 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
> > PHY_TUNE_TUNED12 | PHY_TUNE_TUNEA12);
> > }
> >
> > -static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
> > +static int rtsx_base_turn_on_led(struct rtsx_pcr *pcr)
> > {
> > return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
> > }
> >
> > -static int rts5249_turn_off_led(struct rtsx_pcr *pcr)
> > +static int rtsx_base_turn_off_led(struct rtsx_pcr *pcr)
> > {
> > return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
> > }
> >
> > -static int rts5249_enable_auto_blink(struct rtsx_pcr *pcr)
> > +static int rtsx_base_enable_auto_blink(struct rtsx_pcr *pcr)
> > {
> > return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
> > }
> >
> > -static int rts5249_disable_auto_blink(struct rtsx_pcr *pcr)
> > +static int rtsx_base_disable_auto_blink(struct rtsx_pcr *pcr)
> > {
> > return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
> > }
> >
> > -static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
> > +static int rtsx_base_card_power_on(struct rtsx_pcr *pcr, int card)
> > {
> > int err;
> >
> > @@ -236,7 +246,7 @@ static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
> > return 0;
> > }
> >
> > -static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
> > +static int rtsx_base_card_power_off(struct rtsx_pcr *pcr, int card)
> > {
> > rtsx_pci_init_cmd(pcr);
> > rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
> > @@ -246,22 +256,31 @@ static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
> > return rtsx_pci_send_cmd(pcr, 100);
> > }
> >
> > -static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> > +static int rtsx_base_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> > {
> > int err;
> > + u16 append;
> >
> > - if (voltage == OUTPUT_3V3) {
> > - err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4FC0 | 0x24);
> > - if (err < 0)
> > - return err;
> > - } else if (voltage == OUTPUT_1V8) {
> > - err = rtsx_pci_write_phy_register(pcr, PHY_BACR, 0x3C02);
> > + switch (voltage) {
> > + case OUTPUT_3V3:
> > + err = rtsx_pci_update_phy(pcr, PHY_TUNE, 0xFC3F, 0x03C0);
> > if (err < 0)
> > return err;
> > - err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4C40 | 0x24);
> > + break;
> > + case OUTPUT_1V8:
> > + append = 0x0100;
> > + if (PCI_PID(pcr) == 0x5249) {
> > + err = rtsx_pci_update_phy(pcr, PHY_BACR, 0xFFF3, 0);
> > + if (err < 0)
> > + return err;
> > + append = 0x0080;
> > + }
> > +
> > + err = rtsx_pci_update_phy(pcr, PHY_TUNE, 0xFC3F, append);
> > if (err < 0)
> > return err;
> > - } else {
> > + break;
> > + default:
> > return -EINVAL;
> > }
> >
> > @@ -272,17 +291,17 @@ static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> > }
> >
> > static const struct pcr_ops rts5249_pcr_ops = {
> > - .fetch_vendor_settings = rts5249_fetch_vendor_settings,
> > + .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
> > .extra_init_hw = rts5249_extra_init_hw,
> > .optimize_phy = rts5249_optimize_phy,
> > - .turn_on_led = rts5249_turn_on_led,
> > - .turn_off_led = rts5249_turn_off_led,
> > - .enable_auto_blink = rts5249_enable_auto_blink,
> > - .disable_auto_blink = rts5249_disable_auto_blink,
> > - .card_power_on = rts5249_card_power_on,
> > - .card_power_off = rts5249_card_power_off,
> > - .switch_output_voltage = rts5249_switch_output_voltage,
> > - .force_power_down = rts5249_force_power_down,
> > + .turn_on_led = rtsx_base_turn_on_led,
> > + .turn_off_led = rtsx_base_turn_off_led,
> > + .enable_auto_blink = rtsx_base_enable_auto_blink,
> > + .disable_auto_blink = rtsx_base_disable_auto_blink,
> > + .card_power_on = rtsx_base_card_power_on,
> > + .card_power_off = rtsx_base_card_power_off,
> > + .switch_output_voltage = rtsx_base_switch_output_voltage,
> > + .force_power_down = rtsx_base_force_power_down,
> > };
> >
> > /* SD Pull Control Enable:
> > @@ -357,3 +376,112 @@ void rts5249_init_params(struct rtsx_pcr *pcr)
> > pcr->ms_pull_ctl_enable_tbl = rts5249_ms_pull_ctl_enable_tbl;
> > pcr->ms_pull_ctl_disable_tbl = rts5249_ms_pull_ctl_disable_tbl;
> > }
> > +
> > +static int rts524a_write_phy(struct rtsx_pcr *pcr, u8 addr, u16 val)
> > +{
> > + addr = addr & 0x80 ? (addr & 0x7F) | 0x40 : addr;
> > +
> > + return __rtsx_pci_write_phy_register(pcr, addr, val);
> > +}
> > +
> > +static int rts524a_read_phy(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> > +{
> > + addr = addr & 0x80 ? (addr & 0x7F) | 0x40 : addr;
> > +
> > + return __rtsx_pci_read_phy_register(pcr, addr, val);
> > +}
> > +
> > +static int rts524a_optimize_phy(struct rtsx_pcr *pcr)
> > +{
> > + int err;
> > +
> > + err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> > + D3_DELINK_MODE_EN, 0x00);
> > + if (err < 0)
> > + return err;
> > +
> > + rtsx_pci_write_phy_register(pcr, PHY_PCR,
> > + PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
> > + PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 | PHY_PCR_RSSI_EN);
> > + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> > + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> > +
> > + if (is_version(pcr, 0x524A, IC_VER_A)) {
> > + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> > + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> > + rtsx_pci_write_phy_register(pcr, PHY_SSCCR2,
> > + PHY_SSCCR2_PLL_NCODE | PHY_SSCCR2_TIME0 |
> > + PHY_SSCCR2_TIME2_WIDTH);
> > + rtsx_pci_write_phy_register(pcr, PHY_ANA1A,
> > + PHY_ANA1A_TXR_LOOPBACK | PHY_ANA1A_RXT_BIST |
> > + PHY_ANA1A_TXR_BIST | PHY_ANA1A_REV);
> > + rtsx_pci_write_phy_register(pcr, PHY_ANA1D,
> > + PHY_ANA1D_DEBUG_ADDR);
> > + rtsx_pci_write_phy_register(pcr, PHY_DIG1E,
> > + PHY_DIG1E_REV | PHY_DIG1E_D0_X_D1 |
> > + PHY_DIG1E_RX_ON_HOST | PHY_DIG1E_RCLK_REF_HOST |
> > + PHY_DIG1E_RCLK_TX_EN_KEEP |
> > + PHY_DIG1E_RCLK_TX_TERM_KEEP |
> > + PHY_DIG1E_RCLK_RX_EIDLE_ON | PHY_DIG1E_TX_TERM_KEEP |
> > + PHY_DIG1E_RX_TERM_KEEP | PHY_DIG1E_TX_EN_KEEP |
> > + PHY_DIG1E_RX_EN_KEEP);
> > + }
> > +
> > + rtsx_pci_write_phy_register(pcr, PHY_ANA08,
> > + PHY_ANA08_RX_EQ_DCGAIN | PHY_ANA08_SEL_RX_EN |
> > + PHY_ANA08_RX_EQ_VAL | PHY_ANA08_SCP | PHY_ANA08_SEL_IPI);
> > +
> > + return 0;
> > +}
> > +
> > +static int rts524a_extra_init_hw(struct rtsx_pcr *pcr)
> > +{
> > + rts5249_extra_init_hw(pcr);
> > +
> > + rtsx_pci_write_register(pcr, FUNC_FORCE_CTL,
> > + FORCE_ASPM_L1_EN, FORCE_ASPM_L1_EN);
> > + rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
> > + rtsx_pci_write_register(pcr, LDO_VCC_CFG1, LDO_VCC_LMT_EN,
> > + LDO_VCC_LMT_EN);
> > + rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);
> > + if (is_version(pcr, 0x524A, IC_VER_A)) {
> > + rtsx_pci_write_register(pcr, LDO_DV18_CFG,
> > + LDO_DV18_SR_MASK, LDO_DV18_SR_DF);
> > + rtsx_pci_write_register(pcr, LDO_VCC_CFG1,
> > + LDO_VCC_REF_TUNE_MASK, LDO_VCC_REF_1V2);
> > + rtsx_pci_write_register(pcr, LDO_VIO_CFG,
> > + LDO_VIO_REF_TUNE_MASK, LDO_VIO_REF_1V2);
> > + rtsx_pci_write_register(pcr, LDO_VIO_CFG,
> > + LDO_VIO_SR_MASK, LDO_VIO_SR_DF);
> > + rtsx_pci_write_register(pcr, LDO_DV12S_CFG,
> > + LDO_REF12_TUNE_MASK, LDO_REF12_TUNE_DF);
> > + rtsx_pci_write_register(pcr, SD40_LDO_CTL1,
> > + SD40_VIO_TUNE_MASK, SD40_VIO_TUNE_1V7);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct pcr_ops rts524a_pcr_ops = {
> > + .write_phy = rts524a_write_phy,
> > + .read_phy = rts524a_read_phy,
> > + .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
> > + .extra_init_hw = rts524a_extra_init_hw,
> > + .optimize_phy = rts524a_optimize_phy,
> > + .turn_on_led = rtsx_base_turn_on_led,
> > + .turn_off_led = rtsx_base_turn_off_led,
> > + .enable_auto_blink = rtsx_base_enable_auto_blink,
> > + .disable_auto_blink = rtsx_base_disable_auto_blink,
> > + .card_power_on = rtsx_base_card_power_on,
> > + .card_power_off = rtsx_base_card_power_off,
> > + .switch_output_voltage = rtsx_base_switch_output_voltage,
> > + .force_power_down = rtsx_base_force_power_down,
> > +};
> > +
> > +void rts524a_init_params(struct rtsx_pcr *pcr)
> > +{
> > + rts5249_init_params(pcr);
> > +
> > + pcr->ops = &rts524a_pcr_ops;
> > +}
> > +
> > diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
> > index 81b9c2c..e6d97ad 100644
> > --- a/drivers/mfd/rtsx_pcr.c
> > +++ b/drivers/mfd/rtsx_pcr.c
> > @@ -58,6 +58,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
> > { PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> > { PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> > { PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> > + { PCI_DEVICE(0x10EC, 0x524A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> > { 0, }
> > };
> >
> > @@ -142,7 +143,7 @@ int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data)
> > }
> > EXPORT_SYMBOL_GPL(rtsx_pci_read_register);
> >
> > -int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> > +int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> > {
> > int err, i, finished = 0;
> > u8 tmp;
> > @@ -174,9 +175,17 @@ int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> >
> > return 0;
> > }
> > +
> > +int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> > +{
> > + if (pcr->ops->write_phy)
> > + return pcr->ops->write_phy(pcr, addr, val);
> > +
> > + return __rtsx_pci_write_phy_register(pcr, addr, val);
> > +}
> > EXPORT_SYMBOL_GPL(rtsx_pci_write_phy_register);
> >
> > -int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> > +int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> > {
> > int err, i, finished = 0;
> > u16 data;
> > @@ -222,6 +231,14 @@ int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> >
> > return 0;
> > }
> > +
> > +int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> > +{
> > + if (pcr->ops->read_phy)
> > + return pcr->ops->read_phy(pcr, addr, val);
> > +
> > + return __rtsx_pci_read_phy_register(pcr, addr, val);
> > +}
> > EXPORT_SYMBOL_GPL(rtsx_pci_read_phy_register);
> >
> > void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
> > @@ -1093,6 +1110,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
> > rts5249_init_params(pcr);
> > break;
> >
> > + case 0x524A:
> > + rts524a_init_params(pcr);
> > + break;
> > +
> > case 0x5287:
> > rtl8411b_init_params(pcr);
> > break;
> > diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
> > index fe2bbb6..e7daf6f 100644
> > --- a/drivers/mfd/rtsx_pcr.h
> > +++ b/drivers/mfd/rtsx_pcr.h
> > @@ -27,12 +27,19 @@
> > #define MIN_DIV_N_PCR 80
> > #define MAX_DIV_N_PCR 208
> >
> > +#define RTS524A_PME_FORCE_CTL 0xFF78
> > +#define RTS524A_PM_CTRL3 0xFF7E
> > +
> > +int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
> > +int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
> > +
> > void rts5209_init_params(struct rtsx_pcr *pcr);
> > void rts5229_init_params(struct rtsx_pcr *pcr);
> > void rtl8411_init_params(struct rtsx_pcr *pcr);
> > void rtl8402_init_params(struct rtsx_pcr *pcr);
> > void rts5227_init_params(struct rtsx_pcr *pcr);
> > void rts5249_init_params(struct rtsx_pcr *pcr);
> > +void rts524a_init_params(struct rtsx_pcr *pcr);
> > void rtl8411b_init_params(struct rtsx_pcr *pcr);
> >
> > static inline u8 map_sd_drive(int idx)
> > diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> > index 33cc63c..a392546 100644
> > --- a/include/linux/mfd/rtsx_pci.h
> > +++ b/include/linux/mfd/rtsx_pci.h
> > @@ -577,8 +577,16 @@
> >
> > #define CDRESUMECTL 0xFE52
> > #define WAKE_SEL_CTL 0xFE54
> > +#define PCLK_CTL 0xFE55
> > +#define PCLK_MODE_SEL 0x20
> > #define PME_FORCE_CTL 0xFE56
> > +
> > #define ASPM_FORCE_CTL 0xFE57
> > +#define FORCE_ASPM_CTL0 0x10
> > +#define FORCE_ASPM_VAL_MASK 0x03
> > +#define FORCE_ASPM_L1_EN 0x02
> > +#define FORCE_ASPM_L0_EN 0x01
> > +#define FORCE_ASPM_NO_ASPM 0x00
> > #define PM_CLK_FORCE_CTL 0xFE58
> > #define FUNC_FORCE_CTL 0xFE59
> > #define PERST_GLITCH_WIDTH 0xFE5C
> > @@ -590,7 +598,8 @@
> > #define HOST_ENTER_S3 2
> >
> > #define SDIO_CFG 0xFE70
> > -
> > +#define PM_EVENT_DEBUG 0xFE71
> > +#define PME_DEBUG_0 0x08
> > #define NFTS_TX_CTRL 0xFE72
> >
> > #define PWR_GATE_CTRL 0xFE75
> > @@ -602,12 +611,19 @@
> > #define PWD_SUSPEND_EN 0xFE76
> > #define LDO_PWR_SEL 0xFE78
> >
> > +#define L1SUB_CONFIG1 0xFE8D
> > +#define L1SUB_CONFIG2 0xFE8E
> > +#define L1SUB_AUTO_CFG 0x02
> > +#define L1SUB_CONFIG3 0xFE8F
> > +
> > #define DUMMY_REG_RESET_0 0xFE90
> >
> > #define AUTOLOAD_CFG_BASE 0xFF00
> > #define PETXCFG 0xFF03
> >
> > #define PM_CTRL1 0xFF44
> > +#define CD_RESUME_EN_MASK 0xF0
> > +
> > #define PM_CTRL2 0xFF45
> > #define PM_CTRL3 0xFF46
> > #define SDIO_SEND_PME_EN 0x80
> > @@ -628,6 +644,61 @@
> > #define IMAGE_FLAG_ADDR0 0xCE80
> > #define IMAGE_FLAG_ADDR1 0xCE81
> >
> > +#define RREF_CFG 0xFF6C
> > +#define RREF_VBGSEL_MASK 0x38
> > +#define RREF_VBGSEL_1V25 0x28
> > +
> > +#define OOBS_CONFIG 0xFF6E
> > +#define OOBS_AUTOK_DIS 0x80
> > +#define OOBS_VAL_MASK 0x1F
> > +
> > +#define LDO_DV18_CFG 0xFF70
> > +#define LDO_DV18_SR_MASK 0xC0
> > +#define LDO_DV18_SR_DF 0x40
> > +
> > +#define LDO_CONFIG2 0xFF71
> > +#define LDO_D3318_MASK 0x07
> > +#define LDO_D3318_33V 0x07
> > +#define LDO_D3318_18V 0x02
> > +
> > +#define LDO_VCC_CFG0 0xFF72
> > +#define LDO_VCC_LMTVTH_MASK 0x30
> > +#define LDO_VCC_LMTVTH_2A 0x10
> > +
> > +#define LDO_VCC_CFG1 0xFF73
> > +#define LDO_VCC_REF_TUNE_MASK 0x30
> > +#define LDO_VCC_REF_1V2 0x20
> > +#define LDO_VCC_TUNE_MASK 0x07
> > +#define LDO_VCC_1V8 0x04
> > +#define LDO_VCC_3V3 0x07
> > +#define LDO_VCC_LMT_EN 0x08
> > +
> > +#define LDO_VIO_CFG 0xFF75
> > +#define LDO_VIO_SR_MASK 0xC0
> > +#define LDO_VIO_SR_DF 0x40
> > +#define LDO_VIO_REF_TUNE_MASK 0x30
> > +#define LDO_VIO_REF_1V2 0x20
> > +#define LDO_VIO_TUNE_MASK 0x07
> > +#define LDO_VIO_1V7 0x03
> > +#define LDO_VIO_1V8 0x04
> > +#define LDO_VIO_3V3 0x07
> > +
> > +#define LDO_DV12S_CFG 0xFF76
> > +#define LDO_REF12_TUNE_MASK 0x18
> > +#define LDO_REF12_TUNE_DF 0x10
> > +#define LDO_D12_TUNE_MASK 0x07
> > +#define LDO_D12_TUNE_DF 0x04
> > +
> > +#define LDO_AV12S_CFG 0xFF77
> > +#define LDO_AV12S_TUNE_MASK 0x07
> > +#define LDO_AV12S_TUNE_DF 0x04
> > +
> > +#define SD40_LDO_CTL1 0xFE7D
> > +#define SD40_VIO_TUNE_MASK 0x70
> > +#define SD40_VIO_TUNE_1V7 0x30
> > +#define SD_VIO_LDO_1V8 0x40
> > +#define SD_VIO_LDO_3V3 0x70
> > +
> > /* Phy register */
> > #define PHY_PCR 0x00
> > #define PHY_PCR_FORCE_CODE 0xB000
> > @@ -641,6 +712,10 @@
> > #define PHY_RCR1 0x02
> > #define PHY_RCR1_ADP_TIME_4 0x0400
> > #define PHY_RCR1_VCO_COARSE 0x001F
> > +#define PHY_SSCCR2 0x02
> > +#define PHY_SSCCR2_PLL_NCODE 0x0A00
> > +#define PHY_SSCCR2_TIME0 0x001C
> > +#define PHY_SSCCR2_TIME2_WIDTH 0x0003
> >
> > #define PHY_RCR2 0x03
> > #define PHY_RCR2_EMPHASE_EN 0x8000
> > @@ -649,6 +724,9 @@
> > #define PHY_RCR2_FREQSEL_12 0x0040
> > #define PHY_RCR2_CDR_SC_12P 0x0010
> > #define PHY_RCR2_CALIB_LATE 0x0002
> > +#define PHY_SSCCR3 0x03
> > +#define PHY_SSCCR3_STEP_IN 0x2740
> > +#define PHY_SSCCR3_CHECK_DELAY 0x0008
> >
> > #define PHY_RTCR 0x04
> > #define PHY_RDR 0x05
> > @@ -663,6 +741,12 @@
> > #define PHY_TUNE_TUNED18 0x01C0
> > #define PHY_TUNE_TUNED12 0X0020
> > #define PHY_TUNE_TUNEA12 0x0004
> > +#define PHY_ANA08 0x08
> > +#define PHY_ANA08_RX_EQ_DCGAIN 0x5000
> > +#define PHY_ANA08_SEL_RX_EN 0x0400
> > +#define PHY_ANA08_RX_EQ_VAL 0x03C0
> > +#define PHY_ANA08_SCP 0x0020
> > +#define PHY_ANA08_SEL_IPI 0x0004
> >
> > #define PHY_IMR 0x09
> > #define PHY_BPCR 0x0A
> > @@ -698,12 +782,19 @@
> > #define PHY_REV_STOP_CLKWR 0x0004
> >
> > #define PHY_FLD0 0x1A
> > +#define PHY_ANA1A 0x1A
> > +#define PHY_ANA1A_TXR_LOOPBACK 0x2000
> > +#define PHY_ANA1A_RXT_BIST 0x0500
> > +#define PHY_ANA1A_TXR_BIST 0x0040
> > +#define PHY_ANA1A_REV 0x0006
> > #define PHY_FLD1 0x1B
> > #define PHY_FLD2 0x1C
> > #define PHY_FLD3 0x1D
> > #define PHY_FLD3_TIMER_4 0x0800
> > #define PHY_FLD3_TIMER_6 0x0020
> > #define PHY_FLD3_RXDELINK 0x0004
> > +#define PHY_ANA1D 0x1D
> > +#define PHY_ANA1D_DEBUG_ADDR 0x0004
> >
> > #define PHY_FLD4 0x1E
> > #define PHY_FLD4_FLDEN_SEL 0x4000
> > @@ -713,7 +804,18 @@
> > #define PHY_FLD4_BER_COUNT 0x00E0
> > #define PHY_FLD4_BER_TIMER 0x000A
> > #define PHY_FLD4_BER_CHK_EN 0x0001
> > -
> > +#define PHY_DIG1E 0x1E
> > +#define PHY_DIG1E_REV 0x4000
> > +#define PHY_DIG1E_D0_X_D1 0x1000
> > +#define PHY_DIG1E_RX_ON_HOST 0x0800
> > +#define PHY_DIG1E_RCLK_REF_HOST 0x0400
> > +#define PHY_DIG1E_RCLK_TX_EN_KEEP 0x0040
> > +#define PHY_DIG1E_RCLK_TX_TERM_KEEP 0x0020
> > +#define PHY_DIG1E_RCLK_RX_EIDLE_ON 0x0010
> > +#define PHY_DIG1E_TX_TERM_KEEP 0x0008
> > +#define PHY_DIG1E_RX_TERM_KEEP 0x0004
> > +#define PHY_DIG1E_TX_EN_KEEP 0x0002
> > +#define PHY_DIG1E_RX_EN_KEEP 0x0001
> > #define PHY_DUM_REG 0x1F
> >
> > #define PCR_SETTING_REG1 0x724
> > @@ -729,6 +831,8 @@ struct pcr_handle {
> > };
> >
> > struct pcr_ops {
> > + int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val);
> > + int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val);
> > int (*extra_init_hw)(struct rtsx_pcr *pcr);
> > int (*optimize_phy)(struct rtsx_pcr *pcr);
> > int (*turn_on_led)(struct rtsx_pcr *pcr);
> > @@ -830,6 +934,10 @@ struct rtsx_pcr {
> > #define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
> > #define PCI_VID(pcr) ((pcr)->pci->vendor)
> > #define PCI_PID(pcr) ((pcr)->pci->device)
> > +#define is_version(pcr, pid, ver) \
> > + (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
> > +#define pcr_dbg(pcr, fmt, arg...) \
> > + dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
> >
> > #define SDR104_PHASE(val) ((val) & 0xFF)
> > #define SDR50_PHASE(val) (((val) >> 8) & 0xFF)
> > @@ -899,4 +1007,17 @@ static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
> > rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
> > }
> >
> > +static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr,
> > + u16 mask, u16 append)
> > +{
> > + int err;
> > + u16 val;
> > +
> > + err = rtsx_pci_read_phy_register(pcr, addr, &val);
> > + if (err < 0)
> > + return err;
> > +
> > + return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append);
> > +}
> > +
> > #endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 5/9] mfd: rtsx: update phy register
2015-01-22 7:30 ` [RESEND PATCH v2 5/9] mfd: rtsx: update phy register micky_ching
@ 2015-02-16 14:07 ` Lee Jones
0 siblings, 0 replies; 19+ messages in thread
From: Lee Jones @ 2015-02-16 14:07 UTC (permalink / raw)
To: micky_ching; +Cc: sameo, devel, linux-kernel, gregkh, rogerable, wei_wang
On Thu, 22 Jan 2015, micky_ching@realsil.com.cn wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> update phy register value and using direct value instead of macros.
> It is much easier to debug using constant value than a lot of macros.
> We usually need compare the value directly to check the configure.
This is no longer an adequate description of the patch.
> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> ---
> drivers/mfd/rts5249.c | 55 ++++++++++++----------
> include/linux/mfd/rtsx_pci.h | 109 ++++++++++++++++++++++---------------------
> 2 files changed, 85 insertions(+), 79 deletions(-)
>
> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> index 2fe2854..d8072f6 100644
> --- a/drivers/mfd/rts5249.c
> +++ b/drivers/mfd/rts5249.c
> @@ -132,57 +132,62 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
> if (err < 0)
> return err;
>
> - err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
> - PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
> - PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
> - PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 |
> - PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR);
> + err = rtsx_pci_write_phy_register(pcr, PHY_REV,
> + PHY_REV_RESV | PHY_REV_RXIDLE_LATCHED |
> + PHY_REV_P1_EN | PHY_REV_RXIDLE_EN |
> + PHY_REV_CLKREQ_TX_EN | PHY_REV_RX_PWST |
> + PHY_REV_CLKREQ_DT_1_0 | PHY_REV_STOP_CLKRD |
> + PHY_REV_STOP_CLKWR);
The tabbing changes make it difficult to see what you're _really_
doing. If you think the tabs are important (I think they were better
before personally), then send them as a separate patch.
> if (err < 0)
> return err;
>
> msleep(1);
>
> err = rtsx_pci_write_phy_register(pcr, PHY_BPCR,
> - PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
> - PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
> + PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
> + PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
More nonsense?
> if (err < 0)
> return err;
> +
> err = rtsx_pci_write_phy_register(pcr, PHY_PCR,
> - PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
> - PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
> - PHY_PCR_RSSI_EN);
> + PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
> + PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
> + PHY_PCR_RSSI_EN | PHY_PCR_RX10K);
Etc.
I'm going to stop here. Please resubmit this patch properly.
[...]
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A
2015-01-22 7:30 ` [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A micky_ching
2015-02-02 1:07 ` 敬锐
@ 2015-02-16 14:28 ` Lee Jones
2015-02-25 3:27 ` 敬锐
1 sibling, 1 reply; 19+ messages in thread
From: Lee Jones @ 2015-02-16 14:28 UTC (permalink / raw)
To: micky_ching; +Cc: sameo, devel, linux-kernel, gregkh, rogerable, wei_wang
On Thu, 22 Jan 2015, micky_ching@realsil.com.cn wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> add support for new chip rts524A.
>
> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> ---
> drivers/mfd/rts5249.c | 186 ++++++++++++++++++++++++++++++++++++-------
> drivers/mfd/rtsx_pcr.c | 25 +++++-
> drivers/mfd/rtsx_pcr.h | 7 ++
> include/linux/mfd/rtsx_pci.h | 125 ++++++++++++++++++++++++++++-
> 4 files changed, 310 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> index 3977946..97dde92 100644
> --- a/drivers/mfd/rts5249.c
> +++ b/drivers/mfd/rts5249.c
> @@ -65,15 +65,17 @@ static void rts5249_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
> 0xFF, driving[drive_sel][2]);
> }
>
> -static void rts5249_fetch_vendor_settings(struct rtsx_pcr *pcr)
> +static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
> {
> u32 reg;
>
> rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, ®);
> dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
>
> - if (!rtsx_vendor_setting_valid(reg))
> + if (!rtsx_vendor_setting_valid(reg)) {
> + pcr_dbg(pcr, "skip fetch vendor setting\n");
> return;
> + }
>
> pcr->aspm_en = rtsx_reg_to_aspm(reg);
> pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
> @@ -87,15 +89,21 @@ static void rts5249_fetch_vendor_settings(struct rtsx_pcr *pcr)
> pcr->flags |= PCR_REVERSE_SOCKET;
> }
>
> -static void rts5249_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> +static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> {
> /* Set relink_time to 0 */
> rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, 0xFF, 0);
> rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, 0xFF, 0);
> rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
>
> - if (pm_state == HOST_ENTER_S3)
> - rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);
> + if (pm_state == HOST_ENTER_S3) {
> + if (PCI_PID(pcr) == 0x524A)
Please define these magic numbers.
> + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> + D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
> + else if (PCI_PID(pcr) == 0x5249)
> + rtsx_pci_write_register(pcr, PM_CTRL3,
> + D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
> + }
> + if (PCI_PID(pcr) == 0x524A)
Please define these magic numbers.
This chunk might be better written as:
if (pm_state == HOST_ENTER_S3) {
ctrlreg = (PCI_PID(pcr) == 0x524A) ?
RTS524A_PM_CTRL3 : PM_CTRL3;
rtsx_pci_write_register(pcr, ctrlreg,
D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
}
> rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
> }
> @@ -104,6 +112,8 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
> {
> rtsx_pci_init_cmd(pcr);
>
> + /* Rest L1SUB Config */
> + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, L1SUB_CONFIG3, 0xFF, 0x00);
> /* Configure GPIO as output */
> rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
> /* Reset ASPM state to default value */
> @@ -189,27 +199,27 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
> PHY_TUNE_TUNED12 | PHY_TUNE_TUNEA12);
> }
>
> -static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
> +static int rtsx_base_turn_on_led(struct rtsx_pcr *pcr)
> {
> return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
> }
>
> -static int rts5249_turn_off_led(struct rtsx_pcr *pcr)
> +static int rtsx_base_turn_off_led(struct rtsx_pcr *pcr)
> {
> return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
> }
>
> -static int rts5249_enable_auto_blink(struct rtsx_pcr *pcr)
> +static int rtsx_base_enable_auto_blink(struct rtsx_pcr *pcr)
> {
> return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
> }
>
> -static int rts5249_disable_auto_blink(struct rtsx_pcr *pcr)
> +static int rtsx_base_disable_auto_blink(struct rtsx_pcr *pcr)
> {
> return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
> }
>
> -static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
> +static int rtsx_base_card_power_on(struct rtsx_pcr *pcr, int card)
> {
> int err;
>
> @@ -236,7 +246,7 @@ static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
> return 0;
> }
>
> -static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
> +static int rtsx_base_card_power_off(struct rtsx_pcr *pcr, int card)
> {
> rtsx_pci_init_cmd(pcr);
> rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
> @@ -246,22 +256,31 @@ static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
> return rtsx_pci_send_cmd(pcr, 100);
> }
>
> -static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> +static int rtsx_base_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> {
> int err;
> + u16 append;
>
> - if (voltage == OUTPUT_3V3) {
> - err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4FC0 | 0x24);
> - if (err < 0)
> - return err;
> - } else if (voltage == OUTPUT_1V8) {
> - err = rtsx_pci_write_phy_register(pcr, PHY_BACR, 0x3C02);
> + switch (voltage) {
> + case OUTPUT_3V3:
> + err = rtsx_pci_update_phy(pcr, PHY_TUNE, 0xFC3F, 0x03C0);
Define these magic numbers please.
> if (err < 0)
> return err;
> - err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4C40 | 0x24);
> + break;
> + case OUTPUT_1V8:
> + append = 0x0100;
What is append?
> + if (PCI_PID(pcr) == 0x5249) {
> + err = rtsx_pci_update_phy(pcr, PHY_BACR, 0xFFF3, 0);
> + if (err < 0)
> + return err;
> + append = 0x0080;
> + }
> +
> + err = rtsx_pci_update_phy(pcr, PHY_TUNE, 0xFC3F, append);
> if (err < 0)
> return err;
> - } else {
> + break;
> + default:
You might want to provide your user with a reason for bailing out.
> return -EINVAL;
> }
>
> @@ -272,17 +291,17 @@ static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
> }
>
> static const struct pcr_ops rts5249_pcr_ops = {
> - .fetch_vendor_settings = rts5249_fetch_vendor_settings,
> + .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
> .extra_init_hw = rts5249_extra_init_hw,
> .optimize_phy = rts5249_optimize_phy,
> - .turn_on_led = rts5249_turn_on_led,
> - .turn_off_led = rts5249_turn_off_led,
> - .enable_auto_blink = rts5249_enable_auto_blink,
> - .disable_auto_blink = rts5249_disable_auto_blink,
> - .card_power_on = rts5249_card_power_on,
> - .card_power_off = rts5249_card_power_off,
> - .switch_output_voltage = rts5249_switch_output_voltage,
> - .force_power_down = rts5249_force_power_down,
> + .turn_on_led = rtsx_base_turn_on_led,
> + .turn_off_led = rtsx_base_turn_off_led,
> + .enable_auto_blink = rtsx_base_enable_auto_blink,
> + .disable_auto_blink = rtsx_base_disable_auto_blink,
> + .card_power_on = rtsx_base_card_power_on,
> + .card_power_off = rtsx_base_card_power_off,
> + .switch_output_voltage = rtsx_base_switch_output_voltage,
> + .force_power_down = rtsx_base_force_power_down,
> };
>
> /* SD Pull Control Enable:
> @@ -357,3 +376,112 @@ void rts5249_init_params(struct rtsx_pcr *pcr)
> pcr->ms_pull_ctl_enable_tbl = rts5249_ms_pull_ctl_enable_tbl;
> pcr->ms_pull_ctl_disable_tbl = rts5249_ms_pull_ctl_disable_tbl;
> }
> +
> +static int rts524a_write_phy(struct rtsx_pcr *pcr, u8 addr, u16 val)
> +{
> + addr = addr & 0x80 ? (addr & 0x7F) | 0x40 : addr;
> +
> + return __rtsx_pci_write_phy_register(pcr, addr, val);
> +}
> +
> +static int rts524a_read_phy(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> +{
> + addr = addr & 0x80 ? (addr & 0x7F) | 0x40 : addr;
> +
> + return __rtsx_pci_read_phy_register(pcr, addr, val);
> +}
> +
> +static int rts524a_optimize_phy(struct rtsx_pcr *pcr)
> +{
> + int err;
> +
> + err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> + D3_DELINK_MODE_EN, 0x00);
> + if (err < 0)
> + return err;
> +
> + rtsx_pci_write_phy_register(pcr, PHY_PCR,
> + PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
> + PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 | PHY_PCR_RSSI_EN);
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> +
> + if (is_version(pcr, 0x524A, IC_VER_A)) {
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR2,
> + PHY_SSCCR2_PLL_NCODE | PHY_SSCCR2_TIME0 |
> + PHY_SSCCR2_TIME2_WIDTH);
> + rtsx_pci_write_phy_register(pcr, PHY_ANA1A,
> + PHY_ANA1A_TXR_LOOPBACK | PHY_ANA1A_RXT_BIST |
> + PHY_ANA1A_TXR_BIST | PHY_ANA1A_REV);
> + rtsx_pci_write_phy_register(pcr, PHY_ANA1D,
> + PHY_ANA1D_DEBUG_ADDR);
> + rtsx_pci_write_phy_register(pcr, PHY_DIG1E,
> + PHY_DIG1E_REV | PHY_DIG1E_D0_X_D1 |
> + PHY_DIG1E_RX_ON_HOST | PHY_DIG1E_RCLK_REF_HOST |
> + PHY_DIG1E_RCLK_TX_EN_KEEP |
> + PHY_DIG1E_RCLK_TX_TERM_KEEP |
> + PHY_DIG1E_RCLK_RX_EIDLE_ON | PHY_DIG1E_TX_TERM_KEEP |
> + PHY_DIG1E_RX_TERM_KEEP | PHY_DIG1E_TX_EN_KEEP |
> + PHY_DIG1E_RX_EN_KEEP);
> + }
> +
> + rtsx_pci_write_phy_register(pcr, PHY_ANA08,
> + PHY_ANA08_RX_EQ_DCGAIN | PHY_ANA08_SEL_RX_EN |
> + PHY_ANA08_RX_EQ_VAL | PHY_ANA08_SCP | PHY_ANA08_SEL_IPI);
To the uninitiated this function is mostly randomness. How about some
nice comments to illuminate?
> + return 0;
> +}
> +
> +static int rts524a_extra_init_hw(struct rtsx_pcr *pcr)
> +{
> + rts5249_extra_init_hw(pcr);
> +
> + rtsx_pci_write_register(pcr, FUNC_FORCE_CTL,
> + FORCE_ASPM_L1_EN, FORCE_ASPM_L1_EN);
> + rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
> + rtsx_pci_write_register(pcr, LDO_VCC_CFG1, LDO_VCC_LMT_EN,
> + LDO_VCC_LMT_EN);
> + rtsx_pci_write_register(pcr, PCLK_CTL, PCLK_MODE_SEL, PCLK_MODE_SEL);
> + if (is_version(pcr, 0x524A, IC_VER_A)) {
> + rtsx_pci_write_register(pcr, LDO_DV18_CFG,
> + LDO_DV18_SR_MASK, LDO_DV18_SR_DF);
> + rtsx_pci_write_register(pcr, LDO_VCC_CFG1,
> + LDO_VCC_REF_TUNE_MASK, LDO_VCC_REF_1V2);
> + rtsx_pci_write_register(pcr, LDO_VIO_CFG,
> + LDO_VIO_REF_TUNE_MASK, LDO_VIO_REF_1V2);
> + rtsx_pci_write_register(pcr, LDO_VIO_CFG,
> + LDO_VIO_SR_MASK, LDO_VIO_SR_DF);
> + rtsx_pci_write_register(pcr, LDO_DV12S_CFG,
> + LDO_REF12_TUNE_MASK, LDO_REF12_TUNE_DF);
> + rtsx_pci_write_register(pcr, SD40_LDO_CTL1,
> + SD40_VIO_TUNE_MASK, SD40_VIO_TUNE_1V7);
> + }
> +
> + return 0;
> +}
> +
> +static const struct pcr_ops rts524a_pcr_ops = {
> + .write_phy = rts524a_write_phy,
> + .read_phy = rts524a_read_phy,
> + .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
> + .extra_init_hw = rts524a_extra_init_hw,
> + .optimize_phy = rts524a_optimize_phy,
> + .turn_on_led = rtsx_base_turn_on_led,
> + .turn_off_led = rtsx_base_turn_off_led,
> + .enable_auto_blink = rtsx_base_enable_auto_blink,
> + .disable_auto_blink = rtsx_base_disable_auto_blink,
> + .card_power_on = rtsx_base_card_power_on,
> + .card_power_off = rtsx_base_card_power_off,
> + .switch_output_voltage = rtsx_base_switch_output_voltage,
> + .force_power_down = rtsx_base_force_power_down,
> +};
> +
> +void rts524a_init_params(struct rtsx_pcr *pcr)
> +{
> + rts5249_init_params(pcr);
> +
> + pcr->ops = &rts524a_pcr_ops;
> +}
> +
> diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
> index 81b9c2c..e6d97ad 100644
> --- a/drivers/mfd/rtsx_pcr.c
> +++ b/drivers/mfd/rtsx_pcr.c
> @@ -58,6 +58,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
> { PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> + { PCI_DEVICE(0x10EC, 0x524A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
> { 0, }
> };
>
> @@ -142,7 +143,7 @@ int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data)
> }
> EXPORT_SYMBOL_GPL(rtsx_pci_read_register);
>
> -int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> +int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> {
> int err, i, finished = 0;
> u8 tmp;
> @@ -174,9 +175,17 @@ int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
>
> return 0;
> }
> +
> +int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
> +{
> + if (pcr->ops->write_phy)
> + return pcr->ops->write_phy(pcr, addr, val);
> +
> + return __rtsx_pci_write_phy_register(pcr, addr, val);
> +}
> EXPORT_SYMBOL_GPL(rtsx_pci_write_phy_register);
>
> -int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> +int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> {
> int err, i, finished = 0;
> u16 data;
> @@ -222,6 +231,14 @@ int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
>
> return 0;
> }
> +
> +int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
> +{
> + if (pcr->ops->read_phy)
> + return pcr->ops->read_phy(pcr, addr, val);
> +
> + return __rtsx_pci_read_phy_register(pcr, addr, val);
> +}
> EXPORT_SYMBOL_GPL(rtsx_pci_read_phy_register);
>
> void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
> @@ -1093,6 +1110,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
> rts5249_init_params(pcr);
> break;
>
> + case 0x524A:
> + rts524a_init_params(pcr);
> + break;
> +
> case 0x5287:
> rtl8411b_init_params(pcr);
> break;
> diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
> index fe2bbb6..e7daf6f 100644
> --- a/drivers/mfd/rtsx_pcr.h
> +++ b/drivers/mfd/rtsx_pcr.h
> @@ -27,12 +27,19 @@
> #define MIN_DIV_N_PCR 80
> #define MAX_DIV_N_PCR 208
>
> +#define RTS524A_PME_FORCE_CTL 0xFF78
> +#define RTS524A_PM_CTRL3 0xFF7E
> +
> +int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
> +int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
> +
> void rts5209_init_params(struct rtsx_pcr *pcr);
> void rts5229_init_params(struct rtsx_pcr *pcr);
> void rtl8411_init_params(struct rtsx_pcr *pcr);
> void rtl8402_init_params(struct rtsx_pcr *pcr);
> void rts5227_init_params(struct rtsx_pcr *pcr);
> void rts5249_init_params(struct rtsx_pcr *pcr);
> +void rts524a_init_params(struct rtsx_pcr *pcr);
> void rtl8411b_init_params(struct rtsx_pcr *pcr);
>
> static inline u8 map_sd_drive(int idx)
> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
> index 33cc63c..a392546 100644
> --- a/include/linux/mfd/rtsx_pci.h
> +++ b/include/linux/mfd/rtsx_pci.h
> @@ -577,8 +577,16 @@
>
> #define CDRESUMECTL 0xFE52
> #define WAKE_SEL_CTL 0xFE54
> +#define PCLK_CTL 0xFE55
> +#define PCLK_MODE_SEL 0x20
> #define PME_FORCE_CTL 0xFE56
> +
> #define ASPM_FORCE_CTL 0xFE57
> +#define FORCE_ASPM_CTL0 0x10
> +#define FORCE_ASPM_VAL_MASK 0x03
> +#define FORCE_ASPM_L1_EN 0x02
> +#define FORCE_ASPM_L0_EN 0x01
> +#define FORCE_ASPM_NO_ASPM 0x00
> #define PM_CLK_FORCE_CTL 0xFE58
> #define FUNC_FORCE_CTL 0xFE59
> #define PERST_GLITCH_WIDTH 0xFE5C
> @@ -590,7 +598,8 @@
> #define HOST_ENTER_S3 2
>
> #define SDIO_CFG 0xFE70
> -
> +#define PM_EVENT_DEBUG 0xFE71
> +#define PME_DEBUG_0 0x08
> #define NFTS_TX_CTRL 0xFE72
>
> #define PWR_GATE_CTRL 0xFE75
> @@ -602,12 +611,19 @@
> #define PWD_SUSPEND_EN 0xFE76
> #define LDO_PWR_SEL 0xFE78
>
> +#define L1SUB_CONFIG1 0xFE8D
> +#define L1SUB_CONFIG2 0xFE8E
> +#define L1SUB_AUTO_CFG 0x02
> +#define L1SUB_CONFIG3 0xFE8F
> +
> #define DUMMY_REG_RESET_0 0xFE90
>
> #define AUTOLOAD_CFG_BASE 0xFF00
> #define PETXCFG 0xFF03
>
> #define PM_CTRL1 0xFF44
> +#define CD_RESUME_EN_MASK 0xF0
> +
> #define PM_CTRL2 0xFF45
> #define PM_CTRL3 0xFF46
> #define SDIO_SEND_PME_EN 0x80
> @@ -628,6 +644,61 @@
> #define IMAGE_FLAG_ADDR0 0xCE80
> #define IMAGE_FLAG_ADDR1 0xCE81
>
> +#define RREF_CFG 0xFF6C
> +#define RREF_VBGSEL_MASK 0x38
> +#define RREF_VBGSEL_1V25 0x28
> +
> +#define OOBS_CONFIG 0xFF6E
> +#define OOBS_AUTOK_DIS 0x80
> +#define OOBS_VAL_MASK 0x1F
> +
> +#define LDO_DV18_CFG 0xFF70
> +#define LDO_DV18_SR_MASK 0xC0
> +#define LDO_DV18_SR_DF 0x40
> +
> +#define LDO_CONFIG2 0xFF71
> +#define LDO_D3318_MASK 0x07
> +#define LDO_D3318_33V 0x07
> +#define LDO_D3318_18V 0x02
> +
> +#define LDO_VCC_CFG0 0xFF72
> +#define LDO_VCC_LMTVTH_MASK 0x30
> +#define LDO_VCC_LMTVTH_2A 0x10
> +
> +#define LDO_VCC_CFG1 0xFF73
> +#define LDO_VCC_REF_TUNE_MASK 0x30
> +#define LDO_VCC_REF_1V2 0x20
> +#define LDO_VCC_TUNE_MASK 0x07
> +#define LDO_VCC_1V8 0x04
> +#define LDO_VCC_3V3 0x07
> +#define LDO_VCC_LMT_EN 0x08
> +
> +#define LDO_VIO_CFG 0xFF75
> +#define LDO_VIO_SR_MASK 0xC0
> +#define LDO_VIO_SR_DF 0x40
> +#define LDO_VIO_REF_TUNE_MASK 0x30
> +#define LDO_VIO_REF_1V2 0x20
> +#define LDO_VIO_TUNE_MASK 0x07
> +#define LDO_VIO_1V7 0x03
> +#define LDO_VIO_1V8 0x04
> +#define LDO_VIO_3V3 0x07
> +
> +#define LDO_DV12S_CFG 0xFF76
> +#define LDO_REF12_TUNE_MASK 0x18
> +#define LDO_REF12_TUNE_DF 0x10
> +#define LDO_D12_TUNE_MASK 0x07
> +#define LDO_D12_TUNE_DF 0x04
> +
> +#define LDO_AV12S_CFG 0xFF77
> +#define LDO_AV12S_TUNE_MASK 0x07
> +#define LDO_AV12S_TUNE_DF 0x04
> +
> +#define SD40_LDO_CTL1 0xFE7D
> +#define SD40_VIO_TUNE_MASK 0x70
> +#define SD40_VIO_TUNE_1V7 0x30
> +#define SD_VIO_LDO_1V8 0x40
> +#define SD_VIO_LDO_3V3 0x70
> +
> /* Phy register */
> #define PHY_PCR 0x00
> #define PHY_PCR_FORCE_CODE 0xB000
> @@ -641,6 +712,10 @@
> #define PHY_RCR1 0x02
> #define PHY_RCR1_ADP_TIME_4 0x0400
> #define PHY_RCR1_VCO_COARSE 0x001F
> +#define PHY_SSCCR2 0x02
> +#define PHY_SSCCR2_PLL_NCODE 0x0A00
> +#define PHY_SSCCR2_TIME0 0x001C
> +#define PHY_SSCCR2_TIME2_WIDTH 0x0003
>
> #define PHY_RCR2 0x03
> #define PHY_RCR2_EMPHASE_EN 0x8000
> @@ -649,6 +724,9 @@
> #define PHY_RCR2_FREQSEL_12 0x0040
> #define PHY_RCR2_CDR_SC_12P 0x0010
> #define PHY_RCR2_CALIB_LATE 0x0002
> +#define PHY_SSCCR3 0x03
> +#define PHY_SSCCR3_STEP_IN 0x2740
> +#define PHY_SSCCR3_CHECK_DELAY 0x0008
>
> #define PHY_RTCR 0x04
> #define PHY_RDR 0x05
> @@ -663,6 +741,12 @@
> #define PHY_TUNE_TUNED18 0x01C0
> #define PHY_TUNE_TUNED12 0X0020
> #define PHY_TUNE_TUNEA12 0x0004
> +#define PHY_ANA08 0x08
> +#define PHY_ANA08_RX_EQ_DCGAIN 0x5000
> +#define PHY_ANA08_SEL_RX_EN 0x0400
> +#define PHY_ANA08_RX_EQ_VAL 0x03C0
> +#define PHY_ANA08_SCP 0x0020
> +#define PHY_ANA08_SEL_IPI 0x0004
>
> #define PHY_IMR 0x09
> #define PHY_BPCR 0x0A
> @@ -698,12 +782,19 @@
> #define PHY_REV_STOP_CLKWR 0x0004
>
> #define PHY_FLD0 0x1A
> +#define PHY_ANA1A 0x1A
> +#define PHY_ANA1A_TXR_LOOPBACK 0x2000
> +#define PHY_ANA1A_RXT_BIST 0x0500
> +#define PHY_ANA1A_TXR_BIST 0x0040
> +#define PHY_ANA1A_REV 0x0006
> #define PHY_FLD1 0x1B
> #define PHY_FLD2 0x1C
> #define PHY_FLD3 0x1D
> #define PHY_FLD3_TIMER_4 0x0800
> #define PHY_FLD3_TIMER_6 0x0020
> #define PHY_FLD3_RXDELINK 0x0004
> +#define PHY_ANA1D 0x1D
> +#define PHY_ANA1D_DEBUG_ADDR 0x0004
>
> #define PHY_FLD4 0x1E
> #define PHY_FLD4_FLDEN_SEL 0x4000
> @@ -713,7 +804,18 @@
> #define PHY_FLD4_BER_COUNT 0x00E0
> #define PHY_FLD4_BER_TIMER 0x000A
> #define PHY_FLD4_BER_CHK_EN 0x0001
> -
> +#define PHY_DIG1E 0x1E
> +#define PHY_DIG1E_REV 0x4000
> +#define PHY_DIG1E_D0_X_D1 0x1000
> +#define PHY_DIG1E_RX_ON_HOST 0x0800
> +#define PHY_DIG1E_RCLK_REF_HOST 0x0400
> +#define PHY_DIG1E_RCLK_TX_EN_KEEP 0x0040
> +#define PHY_DIG1E_RCLK_TX_TERM_KEEP 0x0020
> +#define PHY_DIG1E_RCLK_RX_EIDLE_ON 0x0010
> +#define PHY_DIG1E_TX_TERM_KEEP 0x0008
> +#define PHY_DIG1E_RX_TERM_KEEP 0x0004
> +#define PHY_DIG1E_TX_EN_KEEP 0x0002
> +#define PHY_DIG1E_RX_EN_KEEP 0x0001
> #define PHY_DUM_REG 0x1F
>
> #define PCR_SETTING_REG1 0x724
> @@ -729,6 +831,8 @@ struct pcr_handle {
> };
>
> struct pcr_ops {
> + int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val);
> + int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val);
> int (*extra_init_hw)(struct rtsx_pcr *pcr);
> int (*optimize_phy)(struct rtsx_pcr *pcr);
> int (*turn_on_led)(struct rtsx_pcr *pcr);
> @@ -830,6 +934,10 @@ struct rtsx_pcr {
> #define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
> #define PCI_VID(pcr) ((pcr)->pci->vendor)
> #define PCI_PID(pcr) ((pcr)->pci->device)
> +#define is_version(pcr, pid, ver) \
> + (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
> +#define pcr_dbg(pcr, fmt, arg...) \
> + dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
>
> #define SDR104_PHASE(val) ((val) & 0xFF)
> #define SDR50_PHASE(val) (((val) >> 8) & 0xFF)
> @@ -899,4 +1007,17 @@ static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
> rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
> }
>
> +static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr,
> + u16 mask, u16 append)
> +{
> + int err;
> + u16 val;
> +
> + err = rtsx_pci_read_phy_register(pcr, addr, &val);
> + if (err < 0)
> + return err;
> +
> + return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append);
> +}
Why is this in here?
> #endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 6/9] mfd: rtsx: remove LCTLR defination
2015-01-22 7:30 ` [RESEND PATCH v2 6/9] mfd: rtsx: remove LCTLR defination micky_ching
@ 2015-02-16 14:31 ` Lee Jones
0 siblings, 0 replies; 19+ messages in thread
From: Lee Jones @ 2015-02-16 14:31 UTC (permalink / raw)
To: micky_ching; +Cc: sameo, devel, linux-kernel, gregkh, rogerable, wei_wang
On Thu, 22 Jan 2015, micky_ching@realsil.com.cn wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> To enable/disable ASPM we should find LINK CONTROL register
> in PCI config space. All old chip use 0x80 address, but new
> chip may use another address, so we using pci_find_capability()
> to get LINK CONTROL address.
>
> rtsx_gops.c was removed, we consider to put some common operations
> to this file, but the actual thing is, only a group of chips
> are in common ops1, and another group of chips in common ops2,
> it is hard to decide put which ops into generic ops file.
>
> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> ---
> drivers/mfd/Makefile | 2 +-
> drivers/mfd/rts5227.c | 2 +-
> drivers/mfd/rts5249.c | 3 +--
> drivers/mfd/rtsx_gops.c | 37 -------------------------------------
> drivers/mfd/rtsx_pcr.c | 22 +++++++++++++++++-----
> include/linux/mfd/rtsx_pci.h | 10 +---------
> 6 files changed, 21 insertions(+), 55 deletions(-)
> delete mode 100644 drivers/mfd/rtsx_gops.c
Acked-by: Lee Jones <lee.jones@linaro.org>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 8/9] mfd: rtsx: add support for rts525A
2015-01-22 7:30 ` [RESEND PATCH v2 8/9] mfd: rtsx: add support for rts525A micky_ching
@ 2015-02-16 14:37 ` Lee Jones
0 siblings, 0 replies; 19+ messages in thread
From: Lee Jones @ 2015-02-16 14:37 UTC (permalink / raw)
To: micky_ching; +Cc: sameo, devel, linux-kernel, gregkh, rogerable, wei_wang
On Thu, 22 Jan 2015, micky_ching@realsil.com.cn wrote:
> From: Micky Ching <micky_ching@realsil.com.cn>
>
> add support for new chip rts525A.
>
> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
> ---
> drivers/mfd/rts5249.c | 104 ++++++++++++++++++++++++++++++++++++++++++-
> drivers/mfd/rtsx_pcr.c | 13 ++++--
> drivers/mfd/rtsx_pcr.h | 1 +
> include/linux/mfd/rtsx_pci.h | 15 +++++++
> 4 files changed, 129 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
> index 97dde92..134e03f 100644
> --- a/drivers/mfd/rts5249.c
> +++ b/drivers/mfd/rts5249.c
> @@ -97,7 +97,7 @@ static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
>
> if (pm_state == HOST_ENTER_S3) {
> - if (PCI_PID(pcr) == 0x524A)
> + if (PCI_PID(pcr) == 0x524A || PCI_PID(pcr) == 0x525A)
Please consider holding a pm_ctrl_reg attribute in the device data
structure, then only doing this once during initialisation.
Other than that, I have the same comments as before.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A
2015-02-16 14:28 ` Lee Jones
@ 2015-02-25 3:27 ` 敬锐
2015-02-25 7:21 ` Lee Jones
0 siblings, 1 reply; 19+ messages in thread
From: 敬锐 @ 2015-02-25 3:27 UTC (permalink / raw)
To: Lee Jones; +Cc: sameo, devel, linux-kernel, gregkh, rogerable, 王炜
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 4826 bytes --]
On 02/16/2015 10:28 PM, Lee Jones wrote:
>
> +static int rts524a_optimize_phy(struct rtsx_pcr *pcr)
> +{
> + int err;
> +
> + err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> + D3_DELINK_MODE_EN, 0x00);
> + if (err < 0)
> + return err;
> +
> + rtsx_pci_write_phy_register(pcr, PHY_PCR,
> + PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
> + PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 | PHY_PCR_RSSI_EN);
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> +
> + if (is_version(pcr, 0x524A, IC_VER_A)) {
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> + rtsx_pci_write_phy_register(pcr, PHY_SSCCR2,
> + PHY_SSCCR2_PLL_NCODE | PHY_SSCCR2_TIME0 |
> + PHY_SSCCR2_TIME2_WIDTH);
> + rtsx_pci_write_phy_register(pcr, PHY_ANA1A,
> + PHY_ANA1A_TXR_LOOPBACK | PHY_ANA1A_RXT_BIST |
> + PHY_ANA1A_TXR_BIST | PHY_ANA1A_REV);
> + rtsx_pci_write_phy_register(pcr, PHY_ANA1D,
> + PHY_ANA1D_DEBUG_ADDR);
> + rtsx_pci_write_phy_register(pcr, PHY_DIG1E,
> + PHY_DIG1E_REV | PHY_DIG1E_D0_X_D1 |
> + PHY_DIG1E_RX_ON_HOST | PHY_DIG1E_RCLK_REF_HOST |
> + PHY_DIG1E_RCLK_TX_EN_KEEP |
> + PHY_DIG1E_RCLK_TX_TERM_KEEP |
> + PHY_DIG1E_RCLK_RX_EIDLE_ON | PHY_DIG1E_TX_TERM_KEEP |
> + PHY_DIG1E_RX_TERM_KEEP | PHY_DIG1E_TX_EN_KEEP |
> + PHY_DIG1E_RX_EN_KEEP);
> + }
> +
> + rtsx_pci_write_phy_register(pcr, PHY_ANA08,
> + PHY_ANA08_RX_EQ_DCGAIN | PHY_ANA08_SEL_RX_EN |
> + PHY_ANA08_RX_EQ_VAL | PHY_ANA08_SCP | PHY_ANA08_SEL_IPI);
> To the uninitiated this function is mostly randomness. How about some
> nice comments to illuminate?
I'm not clear with these setting either, it is used to fix some phy
setting, the default phy setting
it not stable on some special platform, so we have to modify them by driver,
newer version of chip will change its default value to more stable
configure, so some value is
no need to setting for Version B/C...
>
>> diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
>> index fe2bbb6..e7daf6f 100644
>> --- a/drivers/mfd/rtsx_pcr.h
>> +++ b/drivers/mfd/rtsx_pcr.h
>> @@ -27,12 +27,19 @@
>> #define MIN_DIV_N_PCR 80
>> #define MAX_DIV_N_PCR 208
>>
>> +#define RTS524A_PME_FORCE_CTL 0xFF78
>> +#define RTS524A_PM_CTRL3 0xFF7E
>> +
>> +int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
>> +int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
>> +
>> void rts5209_init_params(struct rtsx_pcr *pcr);
>> void rts5229_init_params(struct rtsx_pcr *pcr);
>> void rtl8411_init_params(struct rtsx_pcr *pcr);
>> void rtl8402_init_params(struct rtsx_pcr *pcr);
>> void rts5227_init_params(struct rtsx_pcr *pcr);
>> void rts5249_init_params(struct rtsx_pcr *pcr);
>> +void rts524a_init_params(struct rtsx_pcr *pcr);
>> void rtl8411b_init_params(struct rtsx_pcr *pcr);
>>
>> static inline u8 map_sd_drive(int idx)
>> diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
>> index 33cc63c..a392546 100644
>> --- a/include/linux/mfd/rtsx_pci.h
>> +++ b/include/linux/mfd/rtsx_pci.h
>> @@ -577,8 +577,16 @@
>>
>>
>> #define PCR_SETTING_REG1 0x724
>> @@ -729,6 +831,8 @@ struct pcr_handle {
>> };
>>
>> struct pcr_ops {
>> + int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val);
>> + int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val);
>> int (*extra_init_hw)(struct rtsx_pcr *pcr);
>> int (*optimize_phy)(struct rtsx_pcr *pcr);
>> int (*turn_on_led)(struct rtsx_pcr *pcr);
>> @@ -830,6 +934,10 @@ struct rtsx_pcr {
>> #define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
>> #define PCI_VID(pcr) ((pcr)->pci->vendor)
>> #define PCI_PID(pcr) ((pcr)->pci->device)
>> +#define is_version(pcr, pid, ver) \
>> + (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
>> +#define pcr_dbg(pcr, fmt, arg...) \
>> + dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
>>
>> #define SDR104_PHASE(val) ((val) & 0xFF)
>> #define SDR50_PHASE(val) (((val) >> 8) & 0xFF)
>> @@ -899,4 +1007,17 @@ static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
>> rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
>> }
>>
>> +static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr,
>> + u16 mask, u16 append)
>> +{
>> + int err;
>> + u16 val;
>> +
>> + err = rtsx_pci_read_phy_register(pcr, addr, &val);
>> + if (err < 0)
>> + return err;
>> +
>> + return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append);
>> +}
> Why is this in here?
This is a good api for update phy register, mmc/ms driver can use this
function.
>
>> #endif
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A
2015-02-25 3:27 ` 敬锐
@ 2015-02-25 7:21 ` Lee Jones
0 siblings, 0 replies; 19+ messages in thread
From: Lee Jones @ 2015-02-25 7:21 UTC (permalink / raw)
To: 敬锐
Cc: sameo, devel, linux-kernel, gregkh, rogerable, 王炜
On Wed, 25 Feb 2015, 敬锐 wrote:
>
> On 02/16/2015 10:28 PM, Lee Jones wrote:
> >
> > +static int rts524a_optimize_phy(struct rtsx_pcr *pcr)
> > +{
> > + int err;
> > +
> > + err = rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> > + D3_DELINK_MODE_EN, 0x00);
> > + if (err < 0)
> > + return err;
> > +
> > + rtsx_pci_write_phy_register(pcr, PHY_PCR,
> > + PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
> > + PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 | PHY_PCR_RSSI_EN);
> > + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> > + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> > +
> > + if (is_version(pcr, 0x524A, IC_VER_A)) {
> > + rtsx_pci_write_phy_register(pcr, PHY_SSCCR3,
> > + PHY_SSCCR3_STEP_IN | PHY_SSCCR3_CHECK_DELAY);
> > + rtsx_pci_write_phy_register(pcr, PHY_SSCCR2,
> > + PHY_SSCCR2_PLL_NCODE | PHY_SSCCR2_TIME0 |
> > + PHY_SSCCR2_TIME2_WIDTH);
> > + rtsx_pci_write_phy_register(pcr, PHY_ANA1A,
> > + PHY_ANA1A_TXR_LOOPBACK | PHY_ANA1A_RXT_BIST |
> > + PHY_ANA1A_TXR_BIST | PHY_ANA1A_REV);
> > + rtsx_pci_write_phy_register(pcr, PHY_ANA1D,
> > + PHY_ANA1D_DEBUG_ADDR);
> > + rtsx_pci_write_phy_register(pcr, PHY_DIG1E,
> > + PHY_DIG1E_REV | PHY_DIG1E_D0_X_D1 |
> > + PHY_DIG1E_RX_ON_HOST | PHY_DIG1E_RCLK_REF_HOST |
> > + PHY_DIG1E_RCLK_TX_EN_KEEP |
> > + PHY_DIG1E_RCLK_TX_TERM_KEEP |
> > + PHY_DIG1E_RCLK_RX_EIDLE_ON | PHY_DIG1E_TX_TERM_KEEP |
> > + PHY_DIG1E_RX_TERM_KEEP | PHY_DIG1E_TX_EN_KEEP |
> > + PHY_DIG1E_RX_EN_KEEP);
> > + }
> > +
> > + rtsx_pci_write_phy_register(pcr, PHY_ANA08,
> > + PHY_ANA08_RX_EQ_DCGAIN | PHY_ANA08_SEL_RX_EN |
> > + PHY_ANA08_RX_EQ_VAL | PHY_ANA08_SCP | PHY_ANA08_SEL_IPI);
> > To the uninitiated this function is mostly randomness. How about some
> > nice comments to illuminate?
> I'm not clear with these setting either, it is used to fix some phy
> setting, the default phy setting
> it not stable on some special platform, so we have to modify them by driver,
> newer version of chip will change its default value to more stable
> configure, so some value is
> no need to setting for Version B/C...
That doesn't help me in any way. Use the datasheet, look-up the
values and insert a nice, succinct explanation of what you're doing
and why it's required please.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2015-02-25 7:21 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-22 7:30 [RESEND PATCH v2 0/9] mfd: rtsx: add support for new rts524A and rts525A micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 1/9] mfd: rtsx: replace TAB by SPC after #define micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 2/9] mfd: rtsx: place register address and values togather micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 3/9] mfd: rtsx: update PETXCFG address micky_ching
2015-01-22 7:30 ` [RESEND PATCH v2 4/9] mfd: rtsx: update driving settings micky_ching
2015-01-22 7:40 ` Joe Perches
2015-01-22 7:30 ` [RESEND PATCH v2 5/9] mfd: rtsx: update phy register micky_ching
2015-02-16 14:07 ` Lee Jones
2015-01-22 7:30 ` [RESEND PATCH v2 6/9] mfd: rtsx: remove LCTLR defination micky_ching
2015-02-16 14:31 ` Lee Jones
2015-01-22 7:30 ` [RESEND PATCH v2 7/9] mfd: rtsx: add support for rts524A micky_ching
2015-02-02 1:07 ` 敬锐
2015-02-02 8:52 ` Lee Jones
2015-02-16 14:28 ` Lee Jones
2015-02-25 3:27 ` 敬锐
2015-02-25 7:21 ` Lee Jones
2015-01-22 7:30 ` [RESEND PATCH v2 8/9] mfd: rtsx: add support for rts525A micky_ching
2015-02-16 14:37 ` Lee Jones
2015-01-22 7:30 ` [RESEND PATCH v2 9/9] mfd: rtsx: using pcr_dbg replace dev_dbg micky_ching
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).