Re: [PATCH v3 00/20] Tegra210 Clock Support

[Thierry Reding <thierry.reding@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 3247 bytes --]

On Fri, May 01, 2015 at 02:53:47PM -0400, Rhyland Klein wrote:
> This patch series updates the tegra common clock driver and adds
> support for the Tegra210 clocks. The clocks in Tegra210 changed
> significantly in some ways from earlier generations, so to support
> them, we need to extend our base framework a bit and add some new
> features.
> 
> Some patches here also address issues found while adding features
> and other cleanup type work.
> 
> v3:
>   - Fixed pll_u hierarchy which was incorrect
>   - Added a fix from Andrew Bresticker that was found while testing
>     this code.
> 
> Andrew Bresticker (1):
>   clk: tegra: pll: Fix issues with rates for VCO PLLs
> 
> Bill Huang (7):
>   clk: tegra: pll-params: change misc_reg count from 3 -> 6
>   clk: tegra: pll: Add logic for SS
>   clk: tegra: pll: Add code to handle if resets are supported by PLL
>   clk: tegra: pll: Adjust vco_min if SDM present
>   clk: tegra: pll: Add dyn_ramp callback
>   clk: tegra: pll: Add Set_default logic
>   clk: tegra: Add Super Gen5 Logic
> 
> Rhyland Klein (12):
>   clk: tegra: Modify tegra_audio_clk_init to accept more plls
>   clk: tegra: periph: add new periph clks and muxes for Tegra210
>   clk: tegra: pll: add tegra_pll_wait_for_lock to clk header
>   clk: tegra: pll: simplify clk_enable_path
>   clk: tegra: pll: update warning msg
>   clk: tegra: pll: Don't unconditionally set LOCK flags
>   clk: tegra: pll: Add logic for handling SDM data
>   clk: tegra: pll: Add logic for out-of-table rates for T210
>   clk: tegra: pll: Add specialized logic for T210
>   clk: tegra: pll: Add support for PLLMB for T210
>   clk: tegra: pll: Fix _pll_ramp_calc_pll logic and
>     _calc_dynamic_ramp_rate
>   clk: tegra210: add support for Tegra210 clocks
> 
>  .../bindings/clock/nvidia,tegra210-car.txt         |   56 +
>  drivers/clk/tegra/Makefile                         |    2 +
>  drivers/clk/tegra/clk-id.h                         |   64 +-
>  drivers/clk/tegra/clk-pll.c                        |  697 ++++-
>  drivers/clk/tegra/clk-tegra-audio.c                |   25 +-
>  drivers/clk/tegra/clk-tegra-periph.c               |  257 +-
>  drivers/clk/tegra/clk-tegra-super-gen5.c           |  150 ++
>  drivers/clk/tegra/clk-tegra114.c                   |   30 +-
>  drivers/clk/tegra/clk-tegra124.c                   |   31 +-
>  drivers/clk/tegra/clk-tegra20.c                    |   18 +-
>  drivers/clk/tegra/clk-tegra210.c                   | 2761 ++++++++++++++++++++
>  drivers/clk/tegra/clk-tegra30.c                    |   31 +-
>  drivers/clk/tegra/clk.h                            |   90 +-
>  include/dt-bindings/clock/tegra210-car.h           |  401 +++
>  14 files changed, 4468 insertions(+), 145 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
>  create mode 100644 drivers/clk/tegra/clk-tegra-super-gen5.c
>  create mode 100644 drivers/clk/tegra/clk-tegra210.c
>  create mode 100644 include/dt-bindings/clock/tegra210-car.h

Rhyland,

what is this based on? It doesn't apply on top of any recent linux-next,
nor v4.1-rc1 or v4.0.

Can you regenerate the series on top of v4.1-rc1, please?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]